From 9871e9bb5cf6ff0b51457ca74c270c5c5230b224 Mon Sep 17 00:00:00 2001 From: Logan Gunthorpe Date: Mon, 22 May 2017 16:52:30 -0500 Subject: switchtec: Fix minor bug with partition ID register When a switch endpoint is configured without NTB, the mmio_ntb registers will read all zeros. However, in corner case configurations where the partition ID is not zero and NTB is not enabled, the code will have the wrong partition ID and this causes the driver to use the wrong set of drivers. To fix this we simply take the partition ID from the system info region. Reported-by: Dingbao Chen Signed-off-by: Logan Gunthorpe Signed-off-by: Bjorn Helgaas --- drivers/pci/switch/switchtec.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/pci/switch/switchtec.c') diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c index abaa227a5f34..f6a63406c76e 100644 --- a/drivers/pci/switch/switchtec.c +++ b/drivers/pci/switch/switchtec.c @@ -1441,12 +1441,15 @@ static int switchtec_init_pci(struct switchtec_dev *stdev, stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET; stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET; stdev->mmio_ntb = stdev->mmio + SWITCHTEC_GAS_NTB_OFFSET; - stdev->partition = ioread8(&stdev->mmio_ntb->partition_id); + stdev->partition = ioread8(&stdev->mmio_sys_info->partition_id); stdev->partition_count = ioread8(&stdev->mmio_ntb->partition_count); stdev->mmio_part_cfg_all = stdev->mmio + SWITCHTEC_GAS_PART_CFG_OFFSET; stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[stdev->partition]; stdev->mmio_pff_csr = stdev->mmio + SWITCHTEC_GAS_PFF_CSR_OFFSET; + if (stdev->partition_count < 1) + stdev->partition_count = 1; + init_pff(stdev); pci_set_drvdata(pdev, stdev); -- cgit