From c232c0df9610bf2055ff002ecafb4915f0aff528 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Jan 2019 13:59:57 +0530 Subject: PCI: dwc: dra7xx: Enable x2 mode support for dra74x, dra76x and dra72x dra74x/dra76x and dra72x have separate compatible strings. Add support for these compatible strings in pci-dra7xx driver to perform syscon configurations required to get x2 mode working. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Lorenzo Pieralisi --- drivers/pci/controller/dwc/pci-dra7xx.c | 77 +++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c index a32d6dde7a57..5c72acb49c11 100644 --- a/drivers/pci/controller/dwc/pci-dra7xx.c +++ b/drivers/pci/controller/dwc/pci-dra7xx.c @@ -81,6 +81,10 @@ #define MSI_REQ_GRANT BIT(0) #define MSI_VECTOR_SHIFT 7 +#define PCIE_1LANE_2LANE_SELECTION BIT(13) +#define PCIE_B1C0_MODE_SEL BIT(2) +#define PCIE_B0_B1_TSYNCEN BIT(0) + struct dra7xx_pcie { struct dw_pcie *pci; void __iomem *base; /* DT ti_conf */ @@ -93,6 +97,7 @@ struct dra7xx_pcie { struct dra7xx_pcie_of_data { enum dw_pcie_device_mode mode; + u32 b1co_mode_sel_mask; }; #define to_dra7xx_pcie(x) dev_get_drvdata((x)->dev) @@ -529,6 +534,26 @@ static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = { .mode = DW_PCIE_EP_TYPE, }; +static const struct dra7xx_pcie_of_data dra746_pcie_rc_of_data = { + .b1co_mode_sel_mask = BIT(2), + .mode = DW_PCIE_RC_TYPE, +}; + +static const struct dra7xx_pcie_of_data dra726_pcie_rc_of_data = { + .b1co_mode_sel_mask = GENMASK(3, 2), + .mode = DW_PCIE_RC_TYPE, +}; + +static const struct dra7xx_pcie_of_data dra746_pcie_ep_of_data = { + .b1co_mode_sel_mask = BIT(2), + .mode = DW_PCIE_EP_TYPE, +}; + +static const struct dra7xx_pcie_of_data dra726_pcie_ep_of_data = { + .b1co_mode_sel_mask = GENMASK(3, 2), + .mode = DW_PCIE_EP_TYPE, +}; + static const struct of_device_id of_dra7xx_pcie_match[] = { { .compatible = "ti,dra7-pcie", @@ -538,6 +563,22 @@ static const struct of_device_id of_dra7xx_pcie_match[] = { .compatible = "ti,dra7-pcie-ep", .data = &dra7xx_pcie_ep_of_data, }, + { + .compatible = "ti,dra746-pcie-rc", + .data = &dra746_pcie_rc_of_data, + }, + { + .compatible = "ti,dra726-pcie-rc", + .data = &dra726_pcie_rc_of_data, + }, + { + .compatible = "ti,dra746-pcie-ep", + .data = &dra746_pcie_ep_of_data, + }, + { + .compatible = "ti,dra726-pcie-ep", + .data = &dra726_pcie_ep_of_data, + }, {}, }; @@ -583,6 +624,34 @@ static int dra7xx_pcie_unaligned_memaccess(struct device *dev) return ret; } +static int dra7xx_pcie_configure_two_lane(struct device *dev, + u32 b1co_mode_sel_mask) +{ + struct device_node *np = dev->of_node; + struct regmap *pcie_syscon; + unsigned int pcie_reg; + u32 mask; + u32 val; + + pcie_syscon = syscon_regmap_lookup_by_phandle(np, "ti,syscon-lane-sel"); + if (IS_ERR(pcie_syscon)) { + dev_err(dev, "unable to get ti,syscon-lane-sel\n"); + return -EINVAL; + } + + if (of_property_read_u32_index(np, "ti,syscon-lane-sel", 1, + &pcie_reg)) { + dev_err(dev, "couldn't get lane selection reg offset\n"); + return -EINVAL; + } + + mask = b1co_mode_sel_mask | PCIE_B0_B1_TSYNCEN; + val = PCIE_B1C0_MODE_SEL | PCIE_B0_B1_TSYNCEN; + regmap_update_bits(pcie_syscon, pcie_reg, mask, val); + + return 0; +} + static int __init dra7xx_pcie_probe(struct platform_device *pdev) { u32 reg; @@ -603,6 +672,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) const struct of_device_id *match; const struct dra7xx_pcie_of_data *data; enum dw_pcie_device_mode mode; + u32 b1co_mode_sel_mask; match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev); if (!match) @@ -610,6 +680,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) data = (struct dra7xx_pcie_of_data *)match->data; mode = (enum dw_pcie_device_mode)data->mode; + b1co_mode_sel_mask = data->b1co_mode_sel_mask; dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL); if (!dra7xx) @@ -665,6 +736,12 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) dra7xx->pci = pci; dra7xx->phy_count = phy_count; + if (phy_count == 2) { + ret = dra7xx_pcie_configure_two_lane(dev, b1co_mode_sel_mask); + if (ret < 0) + dra7xx->phy_count = 1; /* Fallback to x1 lane mode */ + } + ret = dra7xx_pcie_enable_phy(dra7xx); if (ret) { dev_err(dev, "failed to enable phy\n"); -- cgit From 65c839a134e6afca13822eeb6e22abea37f86e76 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Thu, 24 Jan 2019 16:15:37 +0530 Subject: PCI: dwc: dra7xx: Invoke phy_set_mode() API to set PHY mode to PHY_MODE_PCIE Certain PHYs used with PCIe controller can also be used with other controllers such as USB or SATA. In order to configure the PHY to work with PCIe controller, invoke phy_set_mode() API with mode set to PHY_MODE_PCIE. Signed-off-by: Kishon Vijay Abraham I [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi --- drivers/pci/controller/dwc/pci-dra7xx.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c index 5c72acb49c11..5d5844fc143e 100644 --- a/drivers/pci/controller/dwc/pci-dra7xx.c +++ b/drivers/pci/controller/dwc/pci-dra7xx.c @@ -504,6 +504,10 @@ static int dra7xx_pcie_enable_phy(struct dra7xx_pcie *dra7xx) int i; for (i = 0; i < phy_count; i++) { + ret = phy_set_mode(dra7xx->phy[i], PHY_MODE_PCIE); + if (ret < 0) + goto err_phy; + ret = phy_init(dra7xx->phy[i]); if (ret < 0) goto err_phy; -- cgit From 12de16ae0d6ca8d41b65dd922f813f74f8497398 Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Thu, 31 Jan 2019 19:17:00 +0100 Subject: PCI: dwc: Remove unnecessary header include (of_gpio.h) Remove unnecessary header include (of_gpio.h) since it doesn't provide any needed symbols. Signed-off-by: Gustavo Pimentel Signed-off-by: Lorenzo Pieralisi Cc: Lorenzo Pieralisi Cc: Joao Pinto Cc: Jingoo Han --- drivers/pci/controller/dwc/pcie-designware-plat.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-plat.c b/drivers/pci/controller/dwc/pcie-designware-plat.c index c12bf794d69c..c1aa700362a7 100644 --- a/drivers/pci/controller/dwc/pcie-designware-plat.c +++ b/drivers/pci/controller/dwc/pcie-designware-plat.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include -- cgit From 3630c4aaae217efd4ce1b090f57da128686d97ce Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Thu, 31 Jan 2019 19:17:01 +0100 Subject: PCI: dwc: Remove unnecessary header include (signal.h) Remove unnecessary header include (signal.h) since it doesn't provide any needed symbols. Signed-off-by: Gustavo Pimentel Signed-off-by: Lorenzo Pieralisi Cc: Lorenzo Pieralisi Cc: Joao Pinto Cc: Jingoo Han --- drivers/pci/controller/dwc/pcie-designware-plat.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-plat.c b/drivers/pci/controller/dwc/pcie-designware-plat.c index c1aa700362a7..cee7b4a04fed 100644 --- a/drivers/pci/controller/dwc/pcie-designware-plat.c +++ b/drivers/pci/controller/dwc/pcie-designware-plat.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include -- cgit From 40e9892ef94ce8b02e6ca7c6ee5405e6c28e946c Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Thu, 31 Jan 2019 19:17:02 +0100 Subject: PCI: dwc: Rename variable name from data to d on dw_pci_bottom_mask/unmask() Rename variable from data to d to maintain consistency between driver functions, such as dw_msi_mask_irq() and dw_msi_unmask_irq(). No functional change is intended. Signed-off-by: Gustavo Pimentel Signed-off-by: Lorenzo Pieralisi Cc: Lorenzo Pieralisi Cc: Joao Pinto Cc: Jingoo Han --- drivers/pci/controller/dwc/pcie-designware-host.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 721d60a5d9e4..36e284c75934 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -149,20 +149,20 @@ static int dw_pci_msi_set_affinity(struct irq_data *irq_data, return -EINVAL; } -static void dw_pci_bottom_mask(struct irq_data *data) +static void dw_pci_bottom_mask(struct irq_data *d) { - struct pcie_port *pp = irq_data_get_irq_chip_data(data); + struct pcie_port *pp = irq_data_get_irq_chip_data(d); unsigned int res, bit, ctrl; unsigned long flags; raw_spin_lock_irqsave(&pp->lock, flags); if (pp->ops->msi_clear_irq) { - pp->ops->msi_clear_irq(pp, data->hwirq); + pp->ops->msi_clear_irq(pp, d->hwirq); } else { - ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL; + ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL; res = ctrl * MSI_REG_CTRL_BLOCK_SIZE; - bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL; + bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL; pp->irq_status[ctrl] &= ~(1 << bit); dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4, @@ -172,20 +172,20 @@ static void dw_pci_bottom_mask(struct irq_data *data) raw_spin_unlock_irqrestore(&pp->lock, flags); } -static void dw_pci_bottom_unmask(struct irq_data *data) +static void dw_pci_bottom_unmask(struct irq_data *d) { - struct pcie_port *pp = irq_data_get_irq_chip_data(data); + struct pcie_port *pp = irq_data_get_irq_chip_data(d); unsigned int res, bit, ctrl; unsigned long flags; raw_spin_lock_irqsave(&pp->lock, flags); if (pp->ops->msi_set_irq) { - pp->ops->msi_set_irq(pp, data->hwirq); + pp->ops->msi_set_irq(pp, d->hwirq); } else { - ctrl = data->hwirq / MAX_MSI_IRQS_PER_CTRL; + ctrl = d->hwirq / MAX_MSI_IRQS_PER_CTRL; res = ctrl * MSI_REG_CTRL_BLOCK_SIZE; - bit = data->hwirq % MAX_MSI_IRQS_PER_CTRL; + bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL; pp->irq_status[ctrl] |= 1 << bit; dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4, -- cgit From 59ea68b3f17294f05c95ffcb6b44442f767fe93c Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Thu, 31 Jan 2019 19:17:03 +0100 Subject: PCI: dwc: Rename variable name from data to d on dw_pci_setup_msi_msg() Rename variable from data to d to maintain consistency between driver functions, such as dw_pci_setup_msi_msg(). No functional change is intended. Signed-off-by: Gustavo Pimentel Signed-off-by: Lorenzo Pieralisi Cc: Lorenzo Pieralisi Cc: Joao Pinto Cc: Jingoo Han --- drivers/pci/controller/dwc/pcie-designware-host.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 36e284c75934..0c6e19ab707b 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -120,9 +120,9 @@ static void dw_chained_msi_isr(struct irq_desc *desc) chained_irq_exit(chip, desc); } -static void dw_pci_setup_msi_msg(struct irq_data *data, struct msi_msg *msg) +static void dw_pci_setup_msi_msg(struct irq_data *d, struct msi_msg *msg) { - struct pcie_port *pp = irq_data_get_irq_chip_data(data); + struct pcie_port *pp = irq_data_get_irq_chip_data(d); struct dw_pcie *pci = to_dw_pcie_from_pp(pp); u64 msi_target; @@ -135,12 +135,12 @@ static void dw_pci_setup_msi_msg(struct irq_data *data, struct msi_msg *msg) msg->address_hi = upper_32_bits(msi_target); if (pp->ops->get_msi_data) - msg->data = pp->ops->get_msi_data(pp, data->hwirq); + msg->data = pp->ops->get_msi_data(pp, d->hwirq); else - msg->data = data->hwirq; + msg->data = d->hwirq; dev_dbg(pci->dev, "msi#%d address_hi %#x address_lo %#x\n", - (int)data->hwirq, msg->address_hi, msg->address_lo); + (int)d->hwirq, msg->address_hi, msg->address_lo); } static int dw_pci_msi_set_affinity(struct irq_data *irq_data, -- cgit From fd5288a362ab55371089acf92ede0d2b876fccc0 Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Thu, 31 Jan 2019 19:17:04 +0100 Subject: PCI: dwc: Rename variable name from data to d on dw_pci_msi_set_affinity() Rename variable from data to d to maintain consistency between driver functions. No functional change is intended. Signed-off-by: Gustavo Pimentel Signed-off-by: Lorenzo Pieralisi Cc: Lorenzo Pieralisi Cc: Joao Pinto Cc: Jingoo Han --- drivers/pci/controller/dwc/pcie-designware-host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 0c6e19ab707b..a59fc17eb120 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -143,7 +143,7 @@ static void dw_pci_setup_msi_msg(struct irq_data *d, struct msi_msg *msg) (int)d->hwirq, msg->address_hi, msg->address_lo); } -static int dw_pci_msi_set_affinity(struct irq_data *irq_data, +static int dw_pci_msi_set_affinity(struct irq_data *d, const struct cpumask *mask, bool force) { return -EINVAL; -- cgit From 4cfae0f1f8ce16c67abd2b40f7d1f645cbc0ae4a Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Thu, 31 Jan 2019 19:17:05 +0100 Subject: PCI: dwc: Rename variable name from data to d on dw_pcie_irq_domain_free() Rename variable from data to d to maintain consistency between driver functions. No functional change is intended. Signed-off-by: Gustavo Pimentel Signed-off-by: Lorenzo Pieralisi Cc: Lorenzo Pieralisi Cc: Joao Pinto Cc: Jingoo Han --- drivers/pci/controller/dwc/pcie-designware-host.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index a59fc17eb120..768e16aad68e 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -255,13 +255,13 @@ static int dw_pcie_irq_domain_alloc(struct irq_domain *domain, static void dw_pcie_irq_domain_free(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs) { - struct irq_data *data = irq_domain_get_irq_data(domain, virq); - struct pcie_port *pp = irq_data_get_irq_chip_data(data); + struct irq_data *d = irq_domain_get_irq_data(domain, virq); + struct pcie_port *pp = irq_data_get_irq_chip_data(d); unsigned long flags; raw_spin_lock_irqsave(&pp->lock, flags); - bitmap_release_region(pp->msi_irq_in_use, data->hwirq, + bitmap_release_region(pp->msi_irq_in_use, d->hwirq, order_base_2(nr_irqs)); raw_spin_unlock_irqrestore(&pp->lock, flags); -- cgit From a348d015f0de7a08f88f8089f6f6c4bc5248029b Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Thu, 31 Jan 2019 19:17:06 +0100 Subject: PCI: dwc: Improve code readability and simplify mask/unmask operations Improve code readability and simplifies mask/unmask operations by inverting the applied logic (no functional change is intended). Replace variable name from irq_status to irq_mask, since its goal is to keep track of which interrupts are masked or not. Signed-off-by: Gustavo Pimentel Signed-off-by: Lorenzo Pieralisi Cc: Lorenzo Pieralisi Cc: Joao Pinto Cc: Jingoo Han --- drivers/pci/controller/dwc/pcie-designware-host.c | 12 ++++++------ drivers/pci/controller/dwc/pcie-designware.h | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 768e16aad68e..c550c4a7ef89 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -164,9 +164,9 @@ static void dw_pci_bottom_mask(struct irq_data *d) res = ctrl * MSI_REG_CTRL_BLOCK_SIZE; bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL; - pp->irq_status[ctrl] &= ~(1 << bit); + pp->irq_mask[ctrl] |= (1 << bit); dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4, - ~pp->irq_status[ctrl]); + pp->irq_mask[ctrl]); } raw_spin_unlock_irqrestore(&pp->lock, flags); @@ -187,9 +187,9 @@ static void dw_pci_bottom_unmask(struct irq_data *d) res = ctrl * MSI_REG_CTRL_BLOCK_SIZE; bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL; - pp->irq_status[ctrl] |= 1 << bit; + pp->irq_mask[ctrl] &= ~(1 << bit); dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4, - ~pp->irq_status[ctrl]); + pp->irq_mask[ctrl]); } raw_spin_unlock_irqrestore(&pp->lock, flags); @@ -665,13 +665,13 @@ void dw_pcie_setup_rc(struct pcie_port *pp) /* Initialize IRQ Status array */ for (ctrl = 0; ctrl < num_ctrls; ctrl++) { + pp->irq_mask[ctrl] = ~0; dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + (ctrl * MSI_REG_CTRL_BLOCK_SIZE), - 4, ~0); + 4, pp->irq_mask[ctrl]); dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE + (ctrl * MSI_REG_CTRL_BLOCK_SIZE), 4, ~0); - pp->irq_status[ctrl] = 0; } /* Setup RC BARs */ diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 9943d8c68335..279000255ad1 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -177,7 +177,7 @@ struct pcie_port { struct irq_domain *msi_domain; dma_addr_t msi_data; u32 num_vectors; - u32 irq_status[MAX_MSI_CTRLS]; + u32 irq_mask[MAX_MSI_CTRLS]; raw_spinlock_t lock; DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS); }; -- cgit From 657722570a555c728c59f17f7825c812c124dc28 Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Thu, 31 Jan 2019 19:17:07 +0100 Subject: PCI: dwc: Replace bit rotation operation (1 << bit) with BIT(bit) Replace bit rotation operation (1 << bit) with BIT(bit), which simplifies code reading. No functional change is intended. Signed-off-by: Gustavo Pimentel Signed-off-by: Lorenzo Pieralisi Cc: Lorenzo Pieralisi Cc: Joao Pinto Cc: Jingoo Han --- drivers/pci/controller/dwc/pcie-designware-host.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index c550c4a7ef89..45ff5e4f8af6 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -164,7 +164,7 @@ static void dw_pci_bottom_mask(struct irq_data *d) res = ctrl * MSI_REG_CTRL_BLOCK_SIZE; bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL; - pp->irq_mask[ctrl] |= (1 << bit); + pp->irq_mask[ctrl] |= BIT(bit); dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4, pp->irq_mask[ctrl]); } @@ -187,7 +187,7 @@ static void dw_pci_bottom_unmask(struct irq_data *d) res = ctrl * MSI_REG_CTRL_BLOCK_SIZE; bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL; - pp->irq_mask[ctrl] &= ~(1 << bit); + pp->irq_mask[ctrl] &= ~BIT(bit); dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4, pp->irq_mask[ctrl]); } @@ -207,7 +207,7 @@ static void dw_pci_bottom_ack(struct irq_data *d) raw_spin_lock_irqsave(&pp->lock, flags); - dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + res, 4, 1 << bit); + dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + res, 4, BIT(bit)); if (pp->ops->msi_irq_ack) pp->ops->msi_irq_ack(d->hwirq, pp); -- cgit From e8e4d4e95701a10691c53165c55789e5e50ba3f5 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Fri, 1 Feb 2019 16:15:20 -0800 Subject: PCI: imx6: Introduce drvdata Introduce driver data struct. This will simplify handling of device specific differences. Signed-off-by: Stefan Agner [andrew.smirnov@gmail.com reformatted drvdata, to simplify future diffs] Signed-off-by: Andrey Smirnov Signed-off-by: Lorenzo Pieralisi Reviewed-by: Lucas Stach Cc: Bjorn Helgaas Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu --- drivers/pci/controller/dwc/pci-imx6.c | 56 +++++++++++++++++++++++------------ 1 file changed, 37 insertions(+), 19 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 52e47dac028f..1e940ba7e4c4 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -41,6 +41,10 @@ enum imx6_pcie_variants { IMX7D, }; +struct imx6_pcie_drvdata { + enum imx6_pcie_variants variant; +}; + struct imx6_pcie { struct dw_pcie *pci; int reset_gpio; @@ -53,7 +57,6 @@ struct imx6_pcie { struct reset_control *pciephy_reset; struct reset_control *apps_reset; struct reset_control *turnoff_reset; - enum imx6_pcie_variants variant; u32 tx_deemph_gen1; u32 tx_deemph_gen2_3p5db; u32 tx_deemph_gen2_6db; @@ -66,6 +69,7 @@ struct imx6_pcie { struct device *pd_pcie; /* power domain for pcie phy */ struct device *pd_pcie_phy; + const struct imx6_pcie_drvdata *drvdata; }; /* Parameters for the waiting for PCIe PHY PLL to lock on i.MX7 */ @@ -339,7 +343,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) { struct device *dev = imx6_pcie->pci->dev; - switch (imx6_pcie->variant) { + switch (imx6_pcie->drvdata->variant) { case IMX7D: reset_control_assert(imx6_pcie->pciephy_reset); reset_control_assert(imx6_pcie->apps_reset); @@ -381,7 +385,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) struct device *dev = pci->dev; int ret = 0; - switch (imx6_pcie->variant) { + switch (imx6_pcie->drvdata->variant) { case IMX6SX: ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi); if (ret) { @@ -484,7 +488,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) !imx6_pcie->gpio_active_high); } - switch (imx6_pcie->variant) { + switch (imx6_pcie->drvdata->variant) { case IMX7D: reset_control_deassert(imx6_pcie->pciephy_reset); imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie); @@ -522,7 +526,7 @@ err_pcie_phy: static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) { - switch (imx6_pcie->variant) { + switch (imx6_pcie->drvdata->variant) { case IMX7D: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0); @@ -644,7 +648,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev) { struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); - switch (imx6_pcie->variant) { + switch (imx6_pcie->drvdata->variant) { case IMX6Q: case IMX6SX: case IMX6QP: @@ -697,7 +701,7 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie) tmp |= PORT_LOGIC_SPEED_CHANGE; dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp); - if (imx6_pcie->variant != IMX7D) { + if (imx6_pcie->drvdata->variant != IMX7D) { /* * On i.MX7, DIRECT_SPEED_CHANGE behaves differently * from i.MX6 family when no link speed transition @@ -794,7 +798,7 @@ static void imx6_pcie_ltssm_disable(struct device *dev) { struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); - switch (imx6_pcie->variant) { + switch (imx6_pcie->drvdata->variant) { case IMX6SX: case IMX6QP: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, @@ -820,7 +824,7 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie) } /* Others poke directly at IOMUXC registers */ - switch (imx6_pcie->variant) { + switch (imx6_pcie->drvdata->variant) { case IMX6SX: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_PM_TURN_OFF, @@ -850,7 +854,7 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) clk_disable_unprepare(imx6_pcie->pcie_phy); clk_disable_unprepare(imx6_pcie->pcie_bus); - switch (imx6_pcie->variant) { + switch (imx6_pcie->drvdata->variant) { case IMX6SX: clk_disable_unprepare(imx6_pcie->pcie_inbound_axi); break; @@ -866,8 +870,8 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) static inline bool imx6_pcie_supports_suspend(struct imx6_pcie *imx6_pcie) { - return (imx6_pcie->variant == IMX7D || - imx6_pcie->variant == IMX6SX); + return (imx6_pcie->drvdata->variant == IMX7D || + imx6_pcie->drvdata->variant == IMX6SX); } static int imx6_pcie_suspend_noirq(struct device *dev) @@ -933,8 +937,7 @@ static int imx6_pcie_probe(struct platform_device *pdev) pci->ops = &dw_pcie_ops; imx6_pcie->pci = pci; - imx6_pcie->variant = - (enum imx6_pcie_variants)of_device_get_match_data(dev); + imx6_pcie->drvdata = of_device_get_match_data(dev); dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); pci->dbi_base = devm_ioremap_resource(dev, dbi_base); @@ -978,7 +981,7 @@ static int imx6_pcie_probe(struct platform_device *pdev) return PTR_ERR(imx6_pcie->pcie); } - switch (imx6_pcie->variant) { + switch (imx6_pcie->drvdata->variant) { case IMX6SX: imx6_pcie->pcie_inbound_axi = devm_clk_get(dev, "pcie_inbound_axi"); @@ -1084,11 +1087,26 @@ static void imx6_pcie_shutdown(struct platform_device *pdev) imx6_pcie_assert_core_reset(imx6_pcie); } +static const struct imx6_pcie_drvdata drvdata[] = { + [IMX6Q] = { + .variant = IMX6Q, + }, + [IMX6SX] = { + .variant = IMX6SX, + }, + [IMX6QP] = { + .variant = IMX6QP, + }, + [IMX7D] = { + .variant = IMX7D, + }, +}; + static const struct of_device_id imx6_pcie_of_match[] = { - { .compatible = "fsl,imx6q-pcie", .data = (void *)IMX6Q, }, - { .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, }, - { .compatible = "fsl,imx6qp-pcie", .data = (void *)IMX6QP, }, - { .compatible = "fsl,imx7d-pcie", .data = (void *)IMX7D, }, + { .compatible = "fsl,imx6q-pcie", .data = &drvdata[IMX6Q], }, + { .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], }, + { .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], }, + { .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], }, {}, }; -- cgit From 2f532d07f0cce72f88a4a0532ae11be6a2745697 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Fri, 1 Feb 2019 16:15:21 -0800 Subject: PCI: imx6: Mark PHY functions as i.MX6 specific PCIe PHY IP block on i.MX7D differs from the one used on i.MX6 family, so none of the code in the current implementation of imx6_setup_phy_mpll() or imx6_pcie_reset_phy() is applicable. Introduce IMX6_PCIE_FLAG_IMX6_PHY and check for it in the aforementioned functions to make sure they are only executed on appropriate PCIe IP variants. Tested-by: Trent Piepho Signed-off-by: Andrey Smirnov [lorenzo.pieralisi@arm.com: updated log] Signed-off-by: Lorenzo Pieralisi Reviewed-by: Lucas Stach Cc: Bjorn Helgaas Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu --- drivers/pci/controller/dwc/pci-imx6.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 1e940ba7e4c4..26e1e974b0dd 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -41,8 +41,11 @@ enum imx6_pcie_variants { IMX7D, }; +#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0) + struct imx6_pcie_drvdata { enum imx6_pcie_variants variant; + u32 flags; }; struct imx6_pcie { @@ -255,6 +258,9 @@ static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie) { u32 tmp; + if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY)) + return; + pcie_phy_read(imx6_pcie, PHY_RX_OVRD_IN_LO, &tmp); tmp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN | PHY_RX_OVRD_IN_LO_RX_PLL_EN); @@ -572,6 +578,9 @@ static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie) int mult, div; u32 val; + if (!(imx6_pcie->drvdata->flags & IMX6_PCIE_FLAG_IMX6_PHY)) + return 0; + switch (phy_rate) { case 125000000: /* @@ -1090,12 +1099,15 @@ static void imx6_pcie_shutdown(struct platform_device *pdev) static const struct imx6_pcie_drvdata drvdata[] = { [IMX6Q] = { .variant = IMX6Q, + .flags = IMX6_PCIE_FLAG_IMX6_PHY, }, [IMX6SX] = { .variant = IMX6SX, + .flags = IMX6_PCIE_FLAG_IMX6_PHY, }, [IMX6QP] = { .variant = IMX6QP, + .flags = IMX6_PCIE_FLAG_IMX6_PHY, }, [IMX7D] = { .variant = IMX7D, -- cgit From 4c458bb347ae016e75f6c61dab95ce530f4ff6fc Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Fri, 1 Feb 2019 16:15:22 -0800 Subject: PCI: imx6: Convert DIRECT_SPEED_CHANGE quirk code to use a flag Both i.MX7D and i.MX8MQ have the same behaviour when it comes to clearing DIRECT_SPEED_CHANGE bit when no speed change occurs, so to handle variants correctly add a flag instead of checking the IP block variant. Signed-off-by: Andrey Smirnov [lorenzo.pieralisi@arm.com: updated log] Signed-off-by: Lorenzo Pieralisi Reviewed-by: Lucas Stach Cc: Bjorn Helgaas Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu --- drivers/pci/controller/dwc/pci-imx6.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 26e1e974b0dd..11b73d733dae 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -42,6 +42,7 @@ enum imx6_pcie_variants { }; #define IMX6_PCIE_FLAG_IMX6_PHY BIT(0) +#define IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE BIT(1) struct imx6_pcie_drvdata { enum imx6_pcie_variants variant; @@ -710,7 +711,8 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie) tmp |= PORT_LOGIC_SPEED_CHANGE; dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp); - if (imx6_pcie->drvdata->variant != IMX7D) { + if (imx6_pcie->drvdata->flags & + IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE) { /* * On i.MX7, DIRECT_SPEED_CHANGE behaves differently * from i.MX6 family when no link speed transition @@ -1099,15 +1101,18 @@ static void imx6_pcie_shutdown(struct platform_device *pdev) static const struct imx6_pcie_drvdata drvdata[] = { [IMX6Q] = { .variant = IMX6Q, - .flags = IMX6_PCIE_FLAG_IMX6_PHY, + .flags = IMX6_PCIE_FLAG_IMX6_PHY | + IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE, }, [IMX6SX] = { .variant = IMX6SX, - .flags = IMX6_PCIE_FLAG_IMX6_PHY, + .flags = IMX6_PCIE_FLAG_IMX6_PHY | + IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE, }, [IMX6QP] = { .variant = IMX6QP, - .flags = IMX6_PCIE_FLAG_IMX6_PHY, + .flags = IMX6_PCIE_FLAG_IMX6_PHY | + IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE, }, [IMX7D] = { .variant = IMX7D, -- cgit From 2d8ed461dbc9bc734185db92d2b9d1bb7b586b30 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Fri, 1 Feb 2019 16:15:23 -0800 Subject: PCI: imx6: Add support for i.MX8MQ Add code needed to support i.MX8MQ variant. Signed-off-by: Andrey Smirnov Signed-off-by: Lorenzo Pieralisi Reviewed-by: Lucas Stach Cc: Bjorn Helgaas Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu --- drivers/pci/controller/dwc/Kconfig | 4 +- drivers/pci/controller/dwc/pci-imx6.c | 77 ++++++++++++++++++++++++++++++++++- 2 files changed, 77 insertions(+), 4 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 548c58223868..6ea74b1c0d94 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -89,8 +89,8 @@ config PCI_EXYNOS select PCIE_DW_HOST config PCI_IMX6 - bool "Freescale i.MX6/7 PCIe controller" - depends on SOC_IMX6Q || SOC_IMX7D || (ARM && COMPILE_TEST) + bool "Freescale i.MX6/7/8 PCIe controller" + depends on SOC_IMX6Q || SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 11b73d733dae..c1d434ba3642 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -8,6 +8,7 @@ * Author: Sean Cross */ +#include #include #include #include @@ -32,6 +33,12 @@ #include "pcie-designware.h" +#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9) +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10) +#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11) +#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8) +#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000 + #define to_imx6_pcie(x) dev_get_drvdata((x)->dev) enum imx6_pcie_variants { @@ -39,6 +46,7 @@ enum imx6_pcie_variants { IMX6SX, IMX6QP, IMX7D, + IMX8MQ, }; #define IMX6_PCIE_FLAG_IMX6_PHY BIT(0) @@ -58,6 +66,7 @@ struct imx6_pcie { struct clk *pcie_inbound_axi; struct clk *pcie; struct regmap *iomuxc_gpr; + u32 controller_id; struct reset_control *pciephy_reset; struct reset_control *apps_reset; struct reset_control *turnoff_reset; @@ -275,6 +284,7 @@ static void imx6_pcie_reset_phy(struct imx6_pcie *imx6_pcie) pcie_phy_write(imx6_pcie, PHY_RX_OVRD_IN_LO, tmp); } +#ifdef CONFIG_ARM /* Added for PCI abort handling */ static int imx6q_pcie_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -308,6 +318,7 @@ static int imx6q_pcie_abort_handler(unsigned long addr, return 1; } +#endif static int imx6_pcie_attach_pd(struct device *dev) { @@ -352,6 +363,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) switch (imx6_pcie->drvdata->variant) { case IMX7D: + case IMX8MQ: reset_control_assert(imx6_pcie->pciephy_reset); reset_control_assert(imx6_pcie->apps_reset); break; @@ -386,10 +398,17 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie) } } +static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie) +{ + WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ); + return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14; +} + static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) { struct dw_pcie *pci = imx6_pcie->pci; struct device *dev = pci->dev; + unsigned int offset; int ret = 0; switch (imx6_pcie->drvdata->variant) { @@ -420,6 +439,19 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) break; case IMX7D: break; + case IMX8MQ: + offset = imx6_pcie_grp_offset(imx6_pcie); + /* + * Set the over ride low and enabled + * make sure that REF_CLK is turned on. + */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset, + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE, + 0); + regmap_update_bits(imx6_pcie->iomuxc_gpr, offset, + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN, + IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN); + break; } return ret; @@ -496,6 +528,9 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) } switch (imx6_pcie->drvdata->variant) { + case IMX8MQ: + reset_control_deassert(imx6_pcie->pciephy_reset); + break; case IMX7D: reset_control_deassert(imx6_pcie->pciephy_reset); imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie); @@ -531,9 +566,37 @@ err_pcie_phy: } } +static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie) +{ + unsigned int mask, val; + + if (imx6_pcie->drvdata->variant == IMX8MQ && + imx6_pcie->controller_id == 1) { + mask = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE; + val = FIELD_PREP(IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE, + PCI_EXP_TYPE_ROOT_PORT); + } else { + mask = IMX6Q_GPR12_DEVICE_TYPE; + val = FIELD_PREP(IMX6Q_GPR12_DEVICE_TYPE, + PCI_EXP_TYPE_ROOT_PORT); + } + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, mask, val); +} + static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) { switch (imx6_pcie->drvdata->variant) { + case IMX8MQ: + /* + * TODO: Currently this code assumes external + * oscillator is being used + */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, + imx6_pcie_grp_offset(imx6_pcie), + IMX8MQ_GPR_PCIE_REF_USE_PAD, + IMX8MQ_GPR_PCIE_REF_USE_PAD); + break; case IMX7D: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0); @@ -569,8 +632,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie) break; } - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, - IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12); + imx6_pcie_configure_type(imx6_pcie); } static int imx6_setup_phy_mpll(struct imx6_pcie *imx6_pcie) @@ -667,6 +729,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev) IMX6Q_GPR12_PCIE_CTL_2); break; case IMX7D: + case IMX8MQ: reset_control_deassert(imx6_pcie->apps_reset); break; } @@ -1002,6 +1065,10 @@ static int imx6_pcie_probe(struct platform_device *pdev) } break; case IMX7D: + case IMX8MQ: + if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) + imx6_pcie->controller_id = 1; + imx6_pcie->pciephy_reset = devm_reset_control_get_exclusive(dev, "pciephy"); if (IS_ERR(imx6_pcie->pciephy_reset)) { @@ -1117,6 +1184,9 @@ static const struct imx6_pcie_drvdata drvdata[] = { [IMX7D] = { .variant = IMX7D, }, + [IMX8MQ] = { + .variant = IMX8MQ, + }, }; static const struct of_device_id imx6_pcie_of_match[] = { @@ -1124,6 +1194,7 @@ static const struct of_device_id imx6_pcie_of_match[] = { { .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], }, { .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], }, { .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], }, + { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } , {}, }; @@ -1140,6 +1211,7 @@ static struct platform_driver imx6_pcie_driver = { static int __init imx6_pcie_init(void) { +#ifdef CONFIG_ARM /* * Since probe() can be deferred we need to make sure that * hook_fault_code is not called after __init memory is freed @@ -1149,6 +1221,7 @@ static int __init imx6_pcie_init(void) */ hook_fault_code(8, imx6q_pcie_abort_handler, SIGBUS, 0, "external abort on non-linefetch"); +#endif return platform_driver_register(&imx6_pcie_driver); } -- cgit From 0380cf843c54d9ee506f5dadc00dd4fe524c99a6 Mon Sep 17 00:00:00 2001 From: Gustavo Pimentel Date: Fri, 7 Dec 2018 18:24:37 +0100 Subject: PCI: dwc: Print debug error message when MSI-X entry control mask bit is set Add debug error message when MSI-X entry control mask bit is set, to help debug the reason why a MSI-X interrupt is not being triggered. Signed-off-by: Gustavo Pimentel Signed-off-by: Lorenzo Pieralisi Cc: Jingoo Han Cc: Bjorn Helgaas Cc: Joao Pinto --- drivers/pci/controller/dwc/pcie-designware-ep.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c index a543c45c7224..5e766af04b66 100644 --- a/drivers/pci/controller/dwc/pcie-designware-ep.c +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c @@ -465,8 +465,10 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no, iounmap(msix_tbl); - if (vec_ctrl & PCI_MSIX_ENTRY_CTRL_MASKBIT) + if (vec_ctrl & PCI_MSIX_ENTRY_CTRL_MASKBIT) { + dev_dbg(pci->dev, "MSI-X entry ctrl set\n"); return -EPERM; + } ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, msg_addr, epc->mem->page_size); -- cgit From 1df82ec4660099fdae42545051cbbeacb5666b50 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Tue, 5 Feb 2019 00:17:41 +0000 Subject: PCI: imx: Add workaround for e10728, IMX7d PCIe PLL failure This implements the workound described in the NXP IMX7d erratum e10728. Initial VCO oscillation may fail under corner conditions such as cold temperature. It causes PCIe PLL to fail to lock in the initialization phase, which results in the PCIe link failing to come up. The workaround is to disable Duty-Cycle Corrector (DCC) calibration after G_RST. To do this it is necessary to gain access to the undocumented and currently unused PCIe PHY register bank. A new device tree node of type "fsl,imx7d-pcie-phy" is created for the PHY block and the existing PCIe device uses a phandle named "fsl,imx7d-pcie-phy" to point to it. Signed-off-by: Trent Piepho [lorenzo.pieralisi@arm.com: updated log string, commit log] Signed-off-by: Lorenzo Pieralisi Reviewed-by: Lucas Stach --- drivers/pci/controller/dwc/pci-imx6.c | 57 +++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index c1d434ba3642..64c74334f7d0 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -77,6 +78,7 @@ struct imx6_pcie { u32 tx_swing_low; int link_gen; struct regulator *vpcie; + void __iomem *phy_base; /* power domain for pcie */ struct device *pd_pcie; @@ -134,6 +136,23 @@ struct imx6_pcie { #define PCIE_PHY_RX_ASIC_OUT 0x100D #define PCIE_PHY_RX_ASIC_OUT_VALID (1 << 0) +/* iMX7 PCIe PHY registers */ +#define PCIE_PHY_CMN_REG4 0x14 +/* These are probably the bits that *aren't* DCC_FB_EN */ +#define PCIE_PHY_CMN_REG4_DCC_FB_EN 0x29 + +#define PCIE_PHY_CMN_REG15 0x54 +#define PCIE_PHY_CMN_REG15_DLY_4 BIT(2) +#define PCIE_PHY_CMN_REG15_PLL_PD BIT(5) +#define PCIE_PHY_CMN_REG15_OVRD_PLL_PD BIT(7) + +#define PCIE_PHY_CMN_REG24 0x90 +#define PCIE_PHY_CMN_REG24_RX_EQ BIT(6) +#define PCIE_PHY_CMN_REG24_RX_EQ_SEL BIT(3) + +#define PCIE_PHY_CMN_REG26 0x98 +#define PCIE_PHY_CMN_REG26_ATT_MODE 0xBC + #define PHY_RX_OVRD_IN_LO 0x1005 #define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5) #define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3) @@ -533,6 +552,26 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) break; case IMX7D: reset_control_deassert(imx6_pcie->pciephy_reset); + + /* Workaround for ERR010728, failure of PCI-e PLL VCO to + * oscillate, especially when cold. This turns off "Duty-cycle + * Corrector" and other mysterious undocumented things. + */ + if (likely(imx6_pcie->phy_base)) { + /* De-assert DCC_FB_EN */ + writel(PCIE_PHY_CMN_REG4_DCC_FB_EN, + imx6_pcie->phy_base + PCIE_PHY_CMN_REG4); + /* Assert RX_EQS and RX_EQS_SEL */ + writel(PCIE_PHY_CMN_REG24_RX_EQ_SEL + | PCIE_PHY_CMN_REG24_RX_EQ, + imx6_pcie->phy_base + PCIE_PHY_CMN_REG24); + /* Assert ATT_MODE */ + writel(PCIE_PHY_CMN_REG26_ATT_MODE, + imx6_pcie->phy_base + PCIE_PHY_CMN_REG26); + } else { + dev_warn(dev, "Unable to apply ERR010728 workaround. DT missing fsl,imx7d-pcie-phy phandle ?\n"); + } + imx7d_pcie_wait_for_phy_pll_lock(imx6_pcie); break; case IMX6SX: @@ -994,6 +1033,7 @@ static int imx6_pcie_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct dw_pcie *pci; struct imx6_pcie *imx6_pcie; + struct device_node *np; struct resource *dbi_base; struct device_node *node = dev->of_node; int ret; @@ -1013,6 +1053,23 @@ static int imx6_pcie_probe(struct platform_device *pdev) imx6_pcie->pci = pci; imx6_pcie->drvdata = of_device_get_match_data(dev); + /* Find the PHY if one is defined, only imx7d uses it */ + np = of_parse_phandle(node, "fsl,imx7d-pcie-phy", 0); + if (np) { + struct resource res; + + ret = of_address_to_resource(np, 0, &res); + if (ret) { + dev_err(dev, "Unable to map PCIe PHY\n"); + return ret; + } + imx6_pcie->phy_base = devm_ioremap_resource(dev, &res); + if (IS_ERR(imx6_pcie->phy_base)) { + dev_err(dev, "Unable to map PCIe PHY\n"); + return PTR_ERR(imx6_pcie->phy_base); + } + } + dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); pci->dbi_base = devm_ioremap_resource(dev, dbi_base); if (IS_ERR(pci->dbi_base)) -- cgit From 02b485e31d98265189b91f3e69c43df2ed50610c Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 25 Jan 2019 15:26:16 -0800 Subject: PCI: qcom: Don't deassert reset GPIO during probe Acquiring the reset GPIO low means that reset is being deasserted, this is followed almost immediately with qcom_pcie_host_init() asserting it, initializing it and then finally deasserting it again, for the link to come up. Some PCIe devices requires a minimum time between the initial deassert and subsequent reset cycles. In a platform that boots with the reset GPIO asserted this requirement is being violated by this deassert/assert pulse. Acquire the reset GPIO high to prevent this situation by matching the state to the subsequent asserted state. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Bjorn Andersson [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi Acked-by: Stanimir Varbanov Cc: stable@vger.kernel.org --- drivers/pci/controller/dwc/pcie-qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index d185ea5fe996..a7f703556790 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1228,7 +1228,7 @@ static int qcom_pcie_probe(struct platform_device *pdev) pcie->ops = of_device_get_match_data(dev); - pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW); + pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); if (IS_ERR(pcie->reset)) { ret = PTR_ERR(pcie->reset); goto err_pm_runtime_put; -- cgit From 5278f65107b15c999cb8a16ee0142015cff6a690 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Mon, 11 Feb 2019 17:51:08 -0800 Subject: PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ The PCIe IP block has an additional clock, "pcie_aux", that needs to be controlled by the driver. Add code to support it. Signed-off-by: Andrey Smirnov Signed-off-by: Lorenzo Pieralisi Reviewed-by: Lucas Stach Cc: Bjorn Helgaas Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: Rob Herring Cc: devicetree@vger.kernel.org --- drivers/pci/controller/dwc/pci-imx6.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 64c74334f7d0..f5a16fd15be5 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -66,6 +66,7 @@ struct imx6_pcie { struct clk *pcie_phy; struct clk *pcie_inbound_axi; struct clk *pcie; + struct clk *pcie_aux; struct regmap *iomuxc_gpr; u32 controller_id; struct reset_control *pciephy_reset; @@ -459,6 +460,12 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) case IMX7D: break; case IMX8MQ: + ret = clk_prepare_enable(imx6_pcie->pcie_aux); + if (ret) { + dev_err(dev, "unable to enable pcie_aux clock\n"); + break; + } + offset = imx6_pcie_grp_offset(imx6_pcie); /* * Set the over ride low and enabled @@ -976,6 +983,9 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, IMX7D_GPR12_PCIE_PHY_REFCLK_SEL); break; + case IMX8MQ: + clk_disable_unprepare(imx6_pcie->pcie_aux); + break; default: break; } @@ -1121,8 +1131,14 @@ static int imx6_pcie_probe(struct platform_device *pdev) return PTR_ERR(imx6_pcie->pcie_inbound_axi); } break; - case IMX7D: case IMX8MQ: + imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux"); + if (IS_ERR(imx6_pcie->pcie_aux)) { + dev_err(dev, "pcie_aux clock source missing or invalid\n"); + return PTR_ERR(imx6_pcie->pcie_aux); + } + /* fall through */ + case IMX7D: if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR) imx6_pcie->controller_id = 1; -- cgit From 4f8bbd2f8e7c4f3112506bf7362aed3a5495d51b Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 19 Feb 2019 12:02:38 -0800 Subject: PCI: dwc: Make use of IS_ALIGNED() Make the intent a bit more clear as well as get rid of explicit arithmetic by using IS_ALIGNED() to determine if "addr" is aligned to "size". No functional change intended. Signed-off-by: Andrey Smirnov Signed-off-by: Lorenzo Pieralisi Acked-by: Gustavo Pimentel Cc: Lorenzo Pieralisi Cc: Bjorn Helgaas Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org --- drivers/pci/controller/dwc/pcie-designware.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 93ef8c31fb39..67236379c61a 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -22,7 +22,7 @@ int dw_pcie_read(void __iomem *addr, int size, u32 *val) { - if ((uintptr_t)addr & (size - 1)) { + if (!IS_ALIGNED((uintptr_t)addr, size)) { *val = 0; return PCIBIOS_BAD_REGISTER_NUMBER; } @@ -43,7 +43,7 @@ int dw_pcie_read(void __iomem *addr, int size, u32 *val) int dw_pcie_write(void __iomem *addr, int size, u32 val) { - if ((uintptr_t)addr & (size - 1)) + if (!IS_ALIGNED((uintptr_t)addr, size)) return PCIBIOS_BAD_REGISTER_NUMBER; if (size == 4) -- cgit From 689e349a1a6c495bace83489753ab1c15696f869 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 19 Feb 2019 12:02:39 -0800 Subject: PCI: dwc: Share code for dw_pcie_rd/wr_other_conf() Default implementation of pcie_rd_other_conf() and dw_pcie_wd_other_conf() share more than 80% of their code. Move shared code into a dedicated subroutine and convert pcie_rd_other_conf() and dw_pcie_wd_other_conf() to use it. No functional change intended. Signed-off-by: Andrey Smirnov Signed-off-by: Lorenzo Pieralisi Acked-by: Gustavo Pimentel Cc: Lorenzo Pieralisi Cc: Bjorn Helgaas Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org --- drivers/pci/controller/dwc/pcie-designware-host.c | 61 +++++++++-------------- 1 file changed, 23 insertions(+), 38 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 45ff5e4f8af6..0c18ab63811f 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -512,8 +512,9 @@ error: return ret; } -static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, - u32 devfn, int where, int size, u32 *val) +static int dw_pcie_access_other_conf(struct pcie_port *pp, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val, + bool write) { int ret, type; u32 busdev, cfg_size; @@ -521,9 +522,6 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, void __iomem *va_cfg_base; struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - if (pp->ops->rd_other_conf) - return pp->ops->rd_other_conf(pp, bus, devfn, where, size, val); - busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) | PCIE_ATU_FUNC(PCI_FUNC(devfn)); @@ -542,7 +540,11 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX1, type, cpu_addr, busdev, cfg_size); - ret = dw_pcie_read(va_cfg_base + where, size, val); + if (write) + ret = dw_pcie_write(va_cfg_base + where, size, *val); + else + ret = dw_pcie_read(va_cfg_base + where, size, val); + if (pci->num_viewport <= 2) dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX1, PCIE_ATU_TYPE_IO, pp->io_base, @@ -551,43 +553,26 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, return ret; } +static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val) +{ + if (pp->ops->rd_other_conf) + return pp->ops->rd_other_conf(pp, bus, devfn, where, + size, val); + + return dw_pcie_access_other_conf(pp, bus, devfn, where, size, val, + false); +} + static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, u32 devfn, int where, int size, u32 val) { - int ret, type; - u32 busdev, cfg_size; - u64 cpu_addr; - void __iomem *va_cfg_base; - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - if (pp->ops->wr_other_conf) - return pp->ops->wr_other_conf(pp, bus, devfn, where, size, val); - - busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) | - PCIE_ATU_FUNC(PCI_FUNC(devfn)); + return pp->ops->wr_other_conf(pp, bus, devfn, where, + size, val); - if (bus->parent->number == pp->root_bus_nr) { - type = PCIE_ATU_TYPE_CFG0; - cpu_addr = pp->cfg0_base; - cfg_size = pp->cfg0_size; - va_cfg_base = pp->va_cfg0_base; - } else { - type = PCIE_ATU_TYPE_CFG1; - cpu_addr = pp->cfg1_base; - cfg_size = pp->cfg1_size; - va_cfg_base = pp->va_cfg1_base; - } - - dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX1, - type, cpu_addr, - busdev, cfg_size); - ret = dw_pcie_write(va_cfg_base + where, size, val); - if (pci->num_viewport <= 2) - dw_pcie_prog_outbound_atu(pci, PCIE_ATU_REGION_INDEX1, - PCIE_ATU_TYPE_IO, pp->io_base, - pp->io_bus_addr, pp->io_size); - - return ret; + return dw_pcie_access_other_conf(pp, bus, devfn, where, size, &val, + true); } static int dw_pcie_valid_device(struct pcie_port *pp, struct pci_bus *bus, -- cgit From 0e11faa48b07a063289d65363015a3d51ca4c337 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 19 Feb 2019 12:02:40 -0800 Subject: PCI: dwc: Make use of BIT() in constant definitions Avoid using explicit left shifts and convert various definitions to use BIT() instead. No functional change intended. Signed-off-by: Andrey Smirnov [lorenzo.pieralisi@arm.com: fixed PORT_LOGIC_SPEED_CHANGE redefinition] Signed-off-by: Lorenzo Pieralisi Acked-by: Gustavo Pimentel Cc: Lorenzo Pieralisi Cc: Bjorn Helgaas Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org --- drivers/pci/controller/dwc/pci-imx6.c | 1 - drivers/pci/controller/dwc/pcie-designware.c | 2 +- drivers/pci/controller/dwc/pcie-designware.h | 14 +++++++------- 3 files changed, 8 insertions(+), 9 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index f5a16fd15be5..5ae75f25c6fc 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -121,7 +121,6 @@ struct imx6_pcie { #define PCIE_PHY_STAT_ACK_LOC 16 #define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C -#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17) /* PHY registers (not memory-mapped) */ #define PCIE_PHY_ATEOVRD 0x10 diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c index 67236379c61a..31f6331ca46f 100644 --- a/drivers/pci/controller/dwc/pcie-designware.c +++ b/drivers/pci/controller/dwc/pcie-designware.c @@ -306,7 +306,7 @@ void dw_pcie_disable_atu(struct dw_pcie *pci, int index, } dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index); - dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~PCIE_ATU_ENABLE); + dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, (u32)~PCIE_ATU_ENABLE); } int dw_pcie_wait_for_link(struct dw_pcie *pci) diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 279000255ad1..070382869685 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -41,7 +41,7 @@ #define PORT_LOGIC_LTSSM_STATE_L0 0x11 #define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C -#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17) +#define PORT_LOGIC_SPEED_CHANGE BIT(17) #define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8) #define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8) #define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8) @@ -55,8 +55,8 @@ #define PCIE_MSI_INTR0_STATUS 0x830 #define PCIE_ATU_VIEWPORT 0x900 -#define PCIE_ATU_REGION_INBOUND (0x1 << 31) -#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) +#define PCIE_ATU_REGION_INBOUND BIT(31) +#define PCIE_ATU_REGION_OUTBOUND 0 #define PCIE_ATU_REGION_INDEX2 (0x2 << 0) #define PCIE_ATU_REGION_INDEX1 (0x1 << 0) #define PCIE_ATU_REGION_INDEX0 (0x0 << 0) @@ -66,8 +66,8 @@ #define PCIE_ATU_TYPE_CFG0 (0x4 << 0) #define PCIE_ATU_TYPE_CFG1 (0x5 << 0) #define PCIE_ATU_CR2 0x908 -#define PCIE_ATU_ENABLE (0x1 << 31) -#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30) +#define PCIE_ATU_ENABLE BIT(31) +#define PCIE_ATU_BAR_MODE_ENABLE BIT(30) #define PCIE_ATU_LOWER_BASE 0x90C #define PCIE_ATU_UPPER_BASE 0x910 #define PCIE_ATU_LIMIT 0x914 @@ -78,7 +78,7 @@ #define PCIE_ATU_UPPER_TARGET 0x91C #define PCIE_MISC_CONTROL_1_OFF 0x8BC -#define PCIE_DBI_RO_WR_EN (0x1 << 0) +#define PCIE_DBI_RO_WR_EN BIT(0) /* * iATU Unroll-specific register definitions @@ -105,7 +105,7 @@ ((region) << 9) #define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \ - (((region) << 9) | (0x1 << 8)) + (((region) << 9) | BIT(8)) #define MAX_MSI_IRQS 256 #define MAX_MSI_IRQS_PER_CTRL 32 -- cgit From a991f748962da0562bc35d2c62d3853b194072e8 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 19 Feb 2019 12:02:41 -0800 Subject: PCI: dwc: Make use of GENMASK/FIELD_PREP Convert various multi-bit fields to be defined using GENMASK/FIELD_PREP. This way bit field boundaries are defined in a single place only, as well as defined in a way that makes it easier to verify them against the reference manual. No functional change intended. Signed-off-by: Andrey Smirnov Signed-off-by: Lorenzo Pieralisi Acked-by: Gustavo Pimentel Cc: Lorenzo Pieralisi Cc: Bjorn Helgaas Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org --- drivers/pci/controller/dwc/pcie-designware.h | 29 +++++++++++++++------------- 1 file changed, 16 insertions(+), 13 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 070382869685..8ebfb06584d9 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -11,6 +11,7 @@ #ifndef _PCIE_DESIGNWARE_H #define _PCIE_DESIGNWARE_H +#include #include #include #include @@ -30,11 +31,12 @@ /* Synopsys-specific PCIe configuration registers */ #define PCIE_PORT_LINK_CONTROL 0x710 -#define PORT_LINK_MODE_MASK (0x3f << 16) -#define PORT_LINK_MODE_1_LANES (0x1 << 16) -#define PORT_LINK_MODE_2_LANES (0x3 << 16) -#define PORT_LINK_MODE_4_LANES (0x7 << 16) -#define PORT_LINK_MODE_8_LANES (0xf << 16) +#define PORT_LINK_MODE_MASK GENMASK(21, 16) +#define PORT_LINK_MODE(n) FIELD_PREP(PORT_LINK_MODE_MASK, n) +#define PORT_LINK_MODE_1_LANES PORT_LINK_MODE(0x1) +#define PORT_LINK_MODE_2_LANES PORT_LINK_MODE(0x3) +#define PORT_LINK_MODE_4_LANES PORT_LINK_MODE(0x7) +#define PORT_LINK_MODE_8_LANES PORT_LINK_MODE(0xf) #define PCIE_PORT_DEBUG0 0x728 #define PORT_LOGIC_LTSSM_STATE_MASK 0x1f @@ -42,11 +44,12 @@ #define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C #define PORT_LOGIC_SPEED_CHANGE BIT(17) -#define PORT_LOGIC_LINK_WIDTH_MASK (0x1f << 8) -#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8) -#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8) -#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8) -#define PORT_LOGIC_LINK_WIDTH_8_LANES (0x8 << 8) +#define PORT_LOGIC_LINK_WIDTH_MASK GENMASK(12, 8) +#define PORT_LOGIC_LINK_WIDTH(n) FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n) +#define PORT_LOGIC_LINK_WIDTH_1_LANES PORT_LOGIC_LINK_WIDTH(0x1) +#define PORT_LOGIC_LINK_WIDTH_2_LANES PORT_LOGIC_LINK_WIDTH(0x2) +#define PORT_LOGIC_LINK_WIDTH_4_LANES PORT_LOGIC_LINK_WIDTH(0x4) +#define PORT_LOGIC_LINK_WIDTH_8_LANES PORT_LOGIC_LINK_WIDTH(0x8) #define PCIE_MSI_ADDR_LO 0x820 #define PCIE_MSI_ADDR_HI 0x824 @@ -72,9 +75,9 @@ #define PCIE_ATU_UPPER_BASE 0x910 #define PCIE_ATU_LIMIT 0x914 #define PCIE_ATU_LOWER_TARGET 0x918 -#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24) -#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19) -#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) +#define PCIE_ATU_BUS(x) FIELD_PREP(GENMASK(31, 24), x) +#define PCIE_ATU_DEV(x) FIELD_PREP(GENMASK(23, 19), x) +#define PCIE_ATU_FUNC(x) FIELD_PREP(GENMASK(18, 16), x) #define PCIE_ATU_UPPER_TARGET 0x91C #define PCIE_MISC_CONTROL_1_OFF 0x8BC -- cgit From 44ddb77b2fdc6352a45ebc7b5804e4afe9161956 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 19 Feb 2019 12:02:42 -0800 Subject: PCI: dwc: Remove superfluous shifting in definitions Surrounding definitions no longer use explicit shift, so "<< 0" here serve no purpose. Remove them. No functional change intended. Signed-off-by: Andrey Smirnov Signed-off-by: Lorenzo Pieralisi Acked-by: Gustavo Pimentel Cc: Lorenzo Pieralisi Cc: Bjorn Helgaas Cc: Fabio Estevam Cc: Chris Healy Cc: Lucas Stach Cc: Leonard Crestez Cc: "A.s. Dong" Cc: Richard Zhu Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org --- drivers/pci/controller/dwc/pcie-designware.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 8ebfb06584d9..f6fb65a40f10 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -60,14 +60,14 @@ #define PCIE_ATU_VIEWPORT 0x900 #define PCIE_ATU_REGION_INBOUND BIT(31) #define PCIE_ATU_REGION_OUTBOUND 0 -#define PCIE_ATU_REGION_INDEX2 (0x2 << 0) -#define PCIE_ATU_REGION_INDEX1 (0x1 << 0) -#define PCIE_ATU_REGION_INDEX0 (0x0 << 0) +#define PCIE_ATU_REGION_INDEX2 0x2 +#define PCIE_ATU_REGION_INDEX1 0x1 +#define PCIE_ATU_REGION_INDEX0 0x0 #define PCIE_ATU_CR1 0x904 -#define PCIE_ATU_TYPE_MEM (0x0 << 0) -#define PCIE_ATU_TYPE_IO (0x2 << 0) -#define PCIE_ATU_TYPE_CFG0 (0x4 << 0) -#define PCIE_ATU_TYPE_CFG1 (0x5 << 0) +#define PCIE_ATU_TYPE_MEM 0x0 +#define PCIE_ATU_TYPE_IO 0x2 +#define PCIE_ATU_TYPE_CFG0 0x4 +#define PCIE_ATU_TYPE_CFG1 0x5 #define PCIE_ATU_CR2 0x908 #define PCIE_ATU_ENABLE BIT(31) #define PCIE_ATU_BAR_MODE_ENABLE BIT(30) -- cgit From 3afc8299f39a27b60e1519a28e18878ce878e7dd Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 27 Feb 2019 17:52:19 +0100 Subject: PCI: dwc: skip MSI init if MSIs have been explicitly disabled Since 7c5925afbc58 (PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API) the MSI init claims one of the controller IRQs as a chained IRQ line for the MSI controller. On some designs, like the i.MX6, this line is shared with a PCIe legacy IRQ. When the line is claimed for the MSI domain, any device trying to use this legacy IRQs will fail to request this IRQ line. As MSI and legacy IRQs are already mutually exclusive on the DWC core, as the core won't forward any legacy IRQs once any MSI has been enabled, users wishing to use legacy IRQs already need to explictly disable MSI support (usually via the pci=nomsi kernel commandline option). To avoid any issues with MSI conflicting with legacy IRQs, just skip all of the DWC MSI initalization, including the IRQ line claim, when MSI is disabled. Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains hierarchical API") Tested-by: Tim Harvey Signed-off-by: Lucas Stach Signed-off-by: Lorenzo Pieralisi Acked-by: Gustavo Pimentel Cc: stable@vger.kernel.org --- drivers/pci/controller/dwc/pcie-designware-host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci') diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index 0c18ab63811f..25087d3c9a82 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -439,7 +439,7 @@ int dw_pcie_host_init(struct pcie_port *pp) if (ret) pci->num_viewport = 2; - if (IS_ENABLED(CONFIG_PCI_MSI)) { + if (IS_ENABLED(CONFIG_PCI_MSI) && pci_msi_enabled()) { /* * If a specific SoC driver needs to change the * default number of vectors, it needs to implement -- cgit