From dddc97e823033b705bbc06bc08b078200ad736a3 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 7 Dec 2018 14:55:31 +0100 Subject: phy: dphy: Add configuration helpers The MIPI D-PHY spec defines default values and boundaries for most of the parameters it defines. Introduce helpers to help drivers get meaningful values based on their current parameters, and validate the boundaries of these parameters if needed. Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/Kconfig | 8 ++ drivers/phy/Makefile | 1 + drivers/phy/phy-core-mipi-dphy.c | 166 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 175 insertions(+) create mode 100644 drivers/phy/phy-core-mipi-dphy.c (limited to 'drivers/phy') diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index eaf0778a18d4..250abe290ca1 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,6 +15,14 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. +config GENERIC_PHY_MIPI_DPHY + bool + help + Generic MIPI D-PHY support. + + Provides a number of helpers a core functions for MIPI D-PHY + drivers to us. + config PHY_LPC18XX_USB_OTG tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" depends on OF && (ARCH_LPC18XX || COMPILE_TEST) diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 84acb3761457..0d9fddc498a6 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -4,6 +4,7 @@ # obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c new file mode 100644 index 000000000000..465fa1b91a5f --- /dev/null +++ b/drivers/phy/phy-core-mipi-dphy.c @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2013 NVIDIA Corporation + * Copyright (C) 2018 Cadence Design Systems Inc. + */ + +#include +#include +#include +#include + +#include +#include + +#define PSEC_PER_SEC 1000000000000LL + +/* + * Minimum D-PHY timings based on MIPI D-PHY specification. Derived + * from the valid ranges specified in Section 6.9, Table 14, Page 41 + * of the D-PHY specification (v2.1). + */ +int phy_mipi_dphy_get_default_config(unsigned long pixel_clock, + unsigned int bpp, + unsigned int lanes, + struct phy_configure_opts_mipi_dphy *cfg) +{ + unsigned long long hs_clk_rate; + unsigned long long ui; + + if (!cfg) + return -EINVAL; + + hs_clk_rate = pixel_clock * bpp; + do_div(hs_clk_rate, lanes); + + ui = ALIGN(PSEC_PER_SEC, hs_clk_rate); + do_div(ui, hs_clk_rate); + + cfg->clk_miss = 0; + cfg->clk_post = 60000 + 52 * ui; + cfg->clk_pre = 8000; + cfg->clk_prepare = 38000; + cfg->clk_settle = 95000; + cfg->clk_term_en = 0; + cfg->clk_trail = 60000; + cfg->clk_zero = 262000; + cfg->d_term_en = 0; + cfg->eot = 0; + cfg->hs_exit = 100000; + cfg->hs_prepare = 40000 + 4 * ui; + cfg->hs_zero = 105000 + 6 * ui; + cfg->hs_settle = 85000 + 6 * ui; + cfg->hs_skip = 40000; + + /* + * The MIPI D-PHY specification (Section 6.9, v1.2, Table 14, Page 40) + * contains this formula as: + * + * T_HS-TRAIL = max(n * 8 * ui, 60 + n * 4 * ui) + * + * where n = 1 for forward-direction HS mode and n = 4 for reverse- + * direction HS mode. There's only one setting and this function does + * not parameterize on anything other that ui, so this code will + * assumes that reverse-direction HS mode is supported and uses n = 4. + */ + cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui); + + cfg->init = 100000000; + cfg->lpx = 60000; + cfg->ta_get = 5 * cfg->lpx; + cfg->ta_go = 4 * cfg->lpx; + cfg->ta_sure = 2 * cfg->lpx; + cfg->wakeup = 1000000000; + + cfg->hs_clk_rate = hs_clk_rate; + cfg->lanes = lanes; + + return 0; +} +EXPORT_SYMBOL(phy_mipi_dphy_get_default_config); + +/* + * Validate D-PHY configuration according to MIPI D-PHY specification + * (v1.2, Section Section 6.9 "Global Operation Timing Parameters"). + */ +int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg) +{ + unsigned long long ui; + + if (!cfg) + return -EINVAL; + + ui = ALIGN(PSEC_PER_SEC, cfg->hs_clk_rate); + do_div(ui, cfg->hs_clk_rate); + + if (cfg->clk_miss > 60000) + return -EINVAL; + + if (cfg->clk_post < (60000 + 52 * ui)) + return -EINVAL; + + if (cfg->clk_pre < 8000) + return -EINVAL; + + if (cfg->clk_prepare < 38000 || cfg->clk_prepare > 95000) + return -EINVAL; + + if (cfg->clk_settle < 95000 || cfg->clk_settle > 300000) + return -EINVAL; + + if (cfg->clk_term_en > 38000) + return -EINVAL; + + if (cfg->clk_trail < 60000) + return -EINVAL; + + if ((cfg->clk_prepare + cfg->clk_zero) < 300000) + return -EINVAL; + + if (cfg->d_term_en > (35000 + 4 * ui)) + return -EINVAL; + + if (cfg->eot > (105000 + 12 * ui)) + return -EINVAL; + + if (cfg->hs_exit < 100000) + return -EINVAL; + + if (cfg->hs_prepare < (40000 + 4 * ui) || + cfg->hs_prepare > (85000 + 6 * ui)) + return -EINVAL; + + if ((cfg->hs_prepare + cfg->hs_zero) < (145000 + 10 * ui)) + return -EINVAL; + + if ((cfg->hs_settle < (85000 + 6 * ui)) || + (cfg->hs_settle > (145000 + 10 * ui))) + return -EINVAL; + + if (cfg->hs_skip < 40000 || cfg->hs_skip > (55000 + 4 * ui)) + return -EINVAL; + + if (cfg->hs_trail < max(8 * ui, 60000 + 4 * ui)) + return -EINVAL; + + if (cfg->init < 100000000) + return -EINVAL; + + if (cfg->lpx < 50000) + return -EINVAL; + + if (cfg->ta_get != (5 * cfg->lpx)) + return -EINVAL; + + if (cfg->ta_go != (4 * cfg->lpx)) + return -EINVAL; + + if (cfg->ta_sure < cfg->lpx || cfg->ta_sure > (2 * cfg->lpx)) + return -EINVAL; + + if (cfg->wakeup < 1000000000) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(phy_mipi_dphy_config_validate); -- cgit