From a9df22c00d7c2c9c2944c62f1b819de6c214660f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 14 Apr 2017 20:32:51 +0200 Subject: power: supply: max17042_battery: Add support for the STATUS property Userspace prefers the driver having a status property over having to guess itself. Specifically this will properly make the GNOME3 UI (and likely others) properly show discharging / charging / full status, instead of always showing discharging as status. Note that in the case there is no charger driver supplying the max17042, then a status of unknown will get returned. At least upower treats this the same as not having a status attribute, so in this case nothing changes from a userspace pov. Signed-off-by: Hans de Goede Reviewed-by: Krzysztof Kozlowski Signed-off-by: Sebastian Reichel --- drivers/power/supply/max17042_battery.c | 46 +++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) (limited to 'drivers/power') diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c index f0ff6e880ff2..62efe7eeb3f8 100644 --- a/drivers/power/supply/max17042_battery.c +++ b/drivers/power/supply/max17042_battery.c @@ -76,6 +76,7 @@ struct max17042_chip { }; static enum power_supply_property max17042_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_CYCLE_COUNT, POWER_SUPPLY_PROP_VOLTAGE_MAX, @@ -113,6 +114,46 @@ static int max17042_get_temperature(struct max17042_chip *chip, int *temp) return 0; } +static int max17042_get_status(struct max17042_chip *chip, int *status) +{ + int ret, charge_full, charge_now; + + ret = power_supply_am_i_supplied(chip->battery); + if (ret < 0) { + *status = POWER_SUPPLY_STATUS_UNKNOWN; + return 0; + } + if (ret == 0) { + *status = POWER_SUPPLY_STATUS_DISCHARGING; + return 0; + } + + /* + * The MAX170xx has builtin end-of-charge detection and will update + * FullCAP to match RepCap when it detects end of charging. + * + * When this cycle the battery gets charged to a higher (calculated) + * capacity then the previous cycle then FullCAP will get updated + * contineously once end-of-charge detection kicks in, so allow the + * 2 to differ a bit. + */ + + ret = regmap_read(chip->regmap, MAX17042_FullCAP, &charge_full); + if (ret < 0) + return ret; + + ret = regmap_read(chip->regmap, MAX17042_RepCap, &charge_now); + if (ret < 0) + return ret; + + if ((charge_full - charge_now) <= MAX17042_FULL_THRESHOLD) + *status = POWER_SUPPLY_STATUS_FULL; + else + *status = POWER_SUPPLY_STATUS_CHARGING; + + return 0; +} + static int max17042_get_battery_health(struct max17042_chip *chip, int *health) { int temp, vavg, vbatt, ret; @@ -182,6 +223,11 @@ static int max17042_get_property(struct power_supply *psy, return -EAGAIN; switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + ret = max17042_get_status(chip, &val->intval); + if (ret < 0) + return ret; + break; case POWER_SUPPLY_PROP_PRESENT: ret = regmap_read(map, MAX17042_STATUS, &data); if (ret < 0) -- cgit