From 2ec3ba69faf301fb599e3651515e808e8efa533e Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Wed, 3 Jul 2013 15:08:50 -0700 Subject: rapidio: convert switch drivers to modules Rework RapidIO switch drivers to add an option to build them as loadable kernel modules. This patch removes RapidIO-specific vmlinux section and converts switch drivers to be compatible with LDM driver registration method. To simplify registration of device-specific callback routines this patch introduces rio_switch_ops data structure. The sw_sysfs() callback is removed from the list of device-specific operations because under the new structure its functions can be handled by switch driver's probe() and remove() routines. If a specific switch device driver is not loaded the RapidIO subsystem core will use default standard-based operations to configure a switch. Because the current implementation of RapidIO enumeration/discovery method relies on availability of device-specific operations for error management, switch device drivers must be loaded before the RapidIO enumeration/discovery starts. This patch also moves several common routines from enumeration/discovery module into the RapidIO core code to make switch-specific operations accessible to all components of RapidIO subsystem. Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Li Yang Cc: Kumar Gala Cc: Andre van Herk Cc: Micha Nelissen Cc: Stef van Os Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/rio.h | 41 ++++++++--------------------------------- 1 file changed, 8 insertions(+), 33 deletions(-) (limited to 'drivers/rapidio/rio.h') diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h index c14f864dea5c..d59587762c76 100644 --- a/drivers/rapidio/rio.h +++ b/drivers/rapidio/rio.h @@ -28,18 +28,17 @@ extern u32 rio_mport_get_efb(struct rio_mport *port, int local, u16 destid, extern int rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount); extern int rio_create_sysfs_dev_files(struct rio_dev *rdev); -extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, - u8 hopcount, u16 table, u16 route_destid, - u8 route_port); -extern int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, - u8 hopcount, u16 table, u16 route_destid, - u8 *route_port); -extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, - u8 hopcount, u16 table); +extern int rio_lock_device(struct rio_mport *port, u16 destid, + u8 hopcount, int wait_ms); +extern int rio_unlock_device(struct rio_mport *port, u16 destid, u8 hopcount); +extern int rio_route_add_entry(struct rio_dev *rdev, + u16 table, u16 route_destid, u8 route_port, int lock); +extern int rio_route_get_entry(struct rio_dev *rdev, u16 table, + u16 route_destid, u8 *route_port, int lock); +extern int rio_route_clr_table(struct rio_dev *rdev, u16 table, int lock); extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock); extern struct rio_dev *rio_get_comptag(u32 comp_tag, struct rio_dev *from); extern int rio_add_device(struct rio_dev *rdev); -extern void rio_switch_init(struct rio_dev *rdev, int do_enum); extern int rio_enable_rx_tx_port(struct rio_mport *port, int local, u16 destid, u8 hopcount, u8 port_num); extern int rio_register_scan(int mport_id, struct rio_scan *scan_ops); @@ -51,29 +50,5 @@ extern struct rio_mport *rio_find_mport(int mport_id); extern struct device_attribute rio_dev_attrs[]; extern struct bus_attribute rio_bus_attrs[]; -extern struct rio_switch_ops __start_rio_switch_ops[]; -extern struct rio_switch_ops __end_rio_switch_ops[]; - -/* Helpers internal to the RIO core code */ -#define DECLARE_RIO_SWITCH_SECTION(section, name, vid, did, init_hook) \ - static const struct rio_switch_ops __rio_switch_##name __used \ - __section(section) = { vid, did, init_hook }; - -/** - * DECLARE_RIO_SWITCH_INIT - Registers switch initialization routine - * @vid: RIO vendor ID - * @did: RIO device ID - * @init_hook: Callback that performs switch-specific initialization - * - * Manipulating switch route tables and error management in RIO - * is switch specific. This registers a switch by vendor and device ID with - * initialization callback for setting up switch operations and (if required) - * hardware initialization. A &struct rio_switch_ops is initialized with - * pointer to the init routine and placed into a RIO-specific kernel section. - */ -#define DECLARE_RIO_SWITCH_INIT(vid, did, init_hook) \ - DECLARE_RIO_SWITCH_SECTION(.rio_switch_ops, vid##did, \ - vid, did, init_hook) - #define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16)) #define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16)) -- cgit