From b59320cc5a5e6ceaa17f0895ffbe0711ebad7adf Mon Sep 17 00:00:00 2001 From: Daniel Jeong Date: Mon, 17 Dec 2012 10:24:06 +0900 Subject: regulator: lp8755: new driver for LP8755 This patch is for new lp8755 regulator dirver and several unsed variables were deleted and then test was done. LP8755 : The LP8755 is a high performance power management unit.It contains six step-down DC-DC converters which can can be filexibly bundled together in multiphase converters as required by application. www.ti.com Signed-off-by: Daniel Jeong Signed-off-by: Mark Brown --- drivers/regulator/lp8755.c | 580 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 580 insertions(+) create mode 100644 drivers/regulator/lp8755.c (limited to 'drivers/regulator/lp8755.c') diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c new file mode 100644 index 000000000000..dbc4d1254ca1 --- /dev/null +++ b/drivers/regulator/lp8755.c @@ -0,0 +1,580 @@ +/* + * LP8755 High Performance Power Management Unit : System Interface Driver + * (based on rev. 0.26) + * Copyright 2012 Texas Instruments + * + * Author: Daniel(Geon Si) Jeong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LP8755_REG_BUCK0 0x00 +#define LP8755_REG_BUCK1 0x03 +#define LP8755_REG_BUCK2 0x04 +#define LP8755_REG_BUCK3 0x01 +#define LP8755_REG_BUCK4 0x05 +#define LP8755_REG_BUCK5 0x02 +#define LP8755_REG_MAX 0xFF + +#define LP8755_BUCK_EN_M BIT(7) +#define LP8755_BUCK_LINEAR_OUT_MAX 0x76 +#define LP8755_BUCK_VOUT_M 0x7F + +enum bucks { + BUCK0 = 0, + BUCK1, + BUCK2, + BUCK3, + BUCK4, + BUCK5, +}; + +struct lp8755_mphase { + int nreg; + int buck_num[LP8755_BUCK_MAX]; +}; + +struct lp8755_chip { + struct device *dev; + struct regmap *regmap; + struct lp8755_platform_data *pdata; + + int irq; + unsigned int irqmask; + + int mphase; + struct regulator_dev *rdev[LP8755_BUCK_MAX]; +}; + +/** + *lp8755_read : read a single register value from lp8755. + *@pchip : device to read from + *@reg : register to read from + *@val : pointer to store read value + */ +static int lp8755_read(struct lp8755_chip *pchip, unsigned int reg, + unsigned int *val) +{ + return regmap_read(pchip->regmap, reg, val); +} + +/** + *lp8755_write : write a single register value to lp8755. + *@pchip : device to write to + *@reg : register to write to + *@val : value to be written + */ +static int lp8755_write(struct lp8755_chip *pchip, unsigned int reg, + unsigned int val) +{ + return regmap_write(pchip->regmap, reg, val); +} + +/** + *lp8755_update_bits : set the values of bit fields in lp8755 register. + *@pchip : device to read from + *@reg : register to update + *@mask : bitmask to be changed + *@val : value for bitmask + */ +static int lp8755_update_bits(struct lp8755_chip *pchip, unsigned int reg, + unsigned int mask, unsigned int val) +{ + return regmap_update_bits(pchip->regmap, reg, mask, val); +} + +static int lp8755_buck_enable_time(struct regulator_dev *rdev) +{ + int ret; + unsigned int regval; + enum lp8755_bucks id = rdev_get_id(rdev); + struct lp8755_chip *pchip = rdev_get_drvdata(rdev); + + ret = lp8755_read(pchip, 0x12 + id, ®val); + if (ret < 0) { + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return ret; + } + return (regval & 0xff) * 100; +} + +static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret; + unsigned int regbval = 0x0; + enum lp8755_bucks id = rdev_get_id(rdev); + struct lp8755_chip *pchip = rdev_get_drvdata(rdev); + + switch (mode) { + case REGULATOR_MODE_FAST: + /* forced pwm mode */ + regbval = (0x01 << id); + break; + case REGULATOR_MODE_NORMAL: + /* enable automatic pwm/pfm mode */ + ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x00); + if (ret < 0) + goto err_i2c; + break; + case REGULATOR_MODE_IDLE: + /* enable automatic pwm/pfm/lppfm mode */ + ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x20); + if (ret < 0) + goto err_i2c; + + ret = lp8755_update_bits(pchip, 0x10, 0x01, 0x01); + if (ret < 0) + goto err_i2c; + break; + default: + dev_err(pchip->dev, "Not supported buck mode %s\n", __func__); + /* forced pwm mode */ + regbval = (0x01 << id); + } + + ret = lp8755_update_bits(pchip, 0x06, 0x01 << id, regbval); + if (ret < 0) + goto err_i2c; + return ret; +err_i2c: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return ret; +} + +static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev) +{ + int ret; + unsigned int regval; + enum lp8755_bucks id = rdev_get_id(rdev); + struct lp8755_chip *pchip = rdev_get_drvdata(rdev); + + ret = lp8755_read(pchip, 0x06, ®val); + if (ret < 0) + goto err_i2c; + + /* mode fast means forced pwm mode */ + if (regval & (0x01 << id)) + return REGULATOR_MODE_FAST; + + ret = lp8755_read(pchip, 0x08 + id, ®val); + if (ret < 0) + goto err_i2c; + + /* mode idle means automatic pwm/pfm/lppfm mode */ + if (regval & 0x20) + return REGULATOR_MODE_IDLE; + + /* mode normal means automatic pwm/pfm mode */ + return REGULATOR_MODE_NORMAL; + +err_i2c: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return 0; +} + +static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp) +{ + int ret; + unsigned int regval = 0x00; + enum lp8755_bucks id = rdev_get_id(rdev); + struct lp8755_chip *pchip = rdev_get_drvdata(rdev); + + /* uV/us */ + switch (ramp) { + case 0 ... 230: + regval = 0x07; + break; + case 231 ... 470: + regval = 0x06; + break; + case 471 ... 940: + regval = 0x05; + break; + case 941 ... 1900: + regval = 0x04; + break; + case 1901 ... 3800: + regval = 0x03; + break; + case 3801 ... 7500: + regval = 0x02; + break; + case 7501 ... 15000: + regval = 0x01; + break; + case 15001 ... 30000: + regval = 0x00; + break; + default: + dev_err(pchip->dev, + "Not supported ramp value %d %s\n", ramp, __func__); + return -EINVAL; + } + + ret = lp8755_update_bits(pchip, 0x07 + id, 0x07, regval); + if (ret < 0) + goto err_i2c; + return ret; +err_i2c: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return ret; +} + +static struct regulator_ops lp8755_buck_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .enable_time = lp8755_buck_enable_time, + .set_mode = lp8755_buck_set_mode, + .get_mode = lp8755_buck_get_mode, + .set_ramp_delay = lp8755_buck_set_ramp, +}; + +#define lp8755_rail(_id) "lp8755_buck"#_id +#define lp8755_buck_init(_id)\ +{\ + .constraints = {\ + .name = lp8755_rail(_id),\ + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,\ + .min_uV = 500000,\ + .max_uV = 1675000,\ + },\ +} + +static struct regulator_init_data lp8755_reg_default[LP8755_BUCK_MAX] = { + [BUCK0] = lp8755_buck_init(0), + [BUCK1] = lp8755_buck_init(1), + [BUCK2] = lp8755_buck_init(2), + [BUCK3] = lp8755_buck_init(3), + [BUCK4] = lp8755_buck_init(4), + [BUCK5] = lp8755_buck_init(5), +}; + +static const struct lp8755_mphase mphase_buck[MPHASE_CONF_MAX] = { + {3, {BUCK0, BUCK3, BUCK5} + }, + {6, {BUCK0, BUCK1, BUCK2, BUCK3, BUCK4, BUCK5} + }, + {5, {BUCK0, BUCK2, BUCK3, BUCK4, BUCK5} + }, + {4, {BUCK0, BUCK3, BUCK4, BUCK5} + }, + {3, {BUCK0, BUCK4, BUCK5} + }, + {2, {BUCK0, BUCK5} + }, + {1, {BUCK0} + }, + {2, {BUCK0, BUCK3} + }, + {4, {BUCK0, BUCK2, BUCK3, BUCK5} + }, +}; + +static int lp8755_init_data(struct lp8755_chip *pchip) +{ + unsigned int regval; + int ret, icnt, buck_num; + struct lp8755_platform_data *pdata = pchip->pdata; + + /* read back muti-phase configuration */ + ret = lp8755_read(pchip, 0x3D, ®val); + if (ret < 0) + goto out_i2c_error; + pchip->mphase = regval & 0x07; + + /* set default data based on multi-phase config */ + for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) { + buck_num = mphase_buck[pchip->mphase].buck_num[icnt]; + pdata->buck_data[buck_num] = &lp8755_reg_default[buck_num]; + } + return ret; + +out_i2c_error: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return ret; +} + +#define lp8755_buck_desc(_id)\ +{\ + .name = lp8755_rail(_id),\ + .id = LP8755_BUCK##_id,\ + .ops = &lp8755_buck_ops,\ + .n_voltages = LP8755_BUCK_LINEAR_OUT_MAX+1,\ + .uV_step = 10000,\ + .min_uV = 500000,\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .enable_reg = LP8755_REG_BUCK##_id,\ + .enable_mask = LP8755_BUCK_EN_M,\ + .vsel_reg = LP8755_REG_BUCK##_id,\ + .vsel_mask = LP8755_BUCK_VOUT_M,\ +} + +static struct regulator_desc lp8755_regulators[] = { + lp8755_buck_desc(0), + lp8755_buck_desc(1), + lp8755_buck_desc(2), + lp8755_buck_desc(3), + lp8755_buck_desc(4), + lp8755_buck_desc(5), +}; + +static int lp8755_regulator_init(struct lp8755_chip *pchip) +{ + int ret, icnt, buck_num; + struct lp8755_platform_data *pdata = pchip->pdata; + struct regulator_config rconfig = { }; + + rconfig.regmap = pchip->regmap; + rconfig.dev = pchip->dev; + rconfig.driver_data = pchip; + + for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) { + buck_num = mphase_buck[pchip->mphase].buck_num[icnt]; + rconfig.init_data = pdata->buck_data[buck_num]; + rconfig.of_node = pchip->dev->of_node; + pchip->rdev[buck_num] = + regulator_register(&lp8755_regulators[buck_num], &rconfig); + if (IS_ERR(pchip->rdev[buck_num])) { + ret = PTR_ERR(pchip->rdev[buck_num]); + dev_err(pchip->dev, "regulator init failed: buck 0\n"); + goto err_buck; + } + } + + return 0; + +err_buck: + for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) + if (pchip->rdev[icnt] != NULL) + regulator_unregister(pchip->rdev[icnt]); + return ret; +} + +static irqreturn_t lp8755_irq_handler(int irq, void *data) +{ + int ret, icnt; + unsigned int flag0, flag1; + struct lp8755_chip *pchip = data; + + /* read flag0 register */ + ret = lp8755_read(pchip, 0x0D, &flag0); + if (ret < 0) + goto err_i2c; + /* clear flag register to pull up int. pin */ + ret = lp8755_write(pchip, 0x0D, 0x00); + if (ret < 0) + goto err_i2c; + + /* sent power fault detection event to specific regulator */ + for (icnt = 0; icnt < 6; icnt++) + if ((flag0 & (0x4 << icnt)) + && (pchip->irqmask & (0x04 << icnt)) + && (pchip->rdev[icnt] != NULL)) + regulator_notifier_call_chain(pchip->rdev[icnt], + LP8755_EVENT_PWR_FAULT, + NULL); + + /* read flag1 register */ + ret = lp8755_read(pchip, 0x0E, &flag1); + if (ret < 0) + goto err_i2c; + /* clear flag register to pull up int. pin */ + ret = lp8755_write(pchip, 0x0E, 0x00); + if (ret < 0) + goto err_i2c; + + /* send OCP event to all regualtor devices */ + if ((flag1 & 0x01) && (pchip->irqmask & 0x01)) + for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) + if (pchip->rdev[icnt] != NULL) + regulator_notifier_call_chain(pchip->rdev[icnt], + LP8755_EVENT_OCP, + NULL); + + /* send OVP event to all regualtor devices */ + if ((flag1 & 0x02) && (pchip->irqmask & 0x02)) + for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) + if (pchip->rdev[icnt] != NULL) + regulator_notifier_call_chain(pchip->rdev[icnt], + LP8755_EVENT_OVP, + NULL); + return IRQ_HANDLED; + +err_i2c: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return IRQ_NONE; +} + +static int lp8755_int_config(struct lp8755_chip *pchip) +{ + int ret; + unsigned int regval; + + if (pchip->irq == 0) { + dev_warn(pchip->dev, "not use interrupt : %s\n", __func__); + return 0; + } + + ret = lp8755_read(pchip, 0x0F, ®val); + if (ret < 0) + goto err_i2c; + pchip->irqmask = regval; + ret = request_threaded_irq(pchip->irq, NULL, lp8755_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "lp8755-irq", pchip); + if (ret) + return ret; + + return ret; + +err_i2c: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return ret; +} + +static const struct regmap_config lp8755_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = LP8755_REG_MAX, +}; + +static int lp8755_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret, icnt; + struct lp8755_chip *pchip; + struct lp8755_platform_data *pdata = client->dev.platform_data; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "i2c functionality check fail.\n"); + return -EOPNOTSUPP; + } + + pchip = devm_kzalloc(&client->dev, + sizeof(struct lp8755_chip), GFP_KERNEL); + if (!pchip) + return -ENOMEM; + + pchip->dev = &client->dev; + pchip->regmap = devm_regmap_init_i2c(client, &lp8755_regmap); + if (IS_ERR(pchip->regmap)) { + ret = PTR_ERR(pchip->regmap); + dev_err(&client->dev, "fail to allocate regmap %d\n", ret); + return ret; + } + i2c_set_clientdata(client, pchip); + + if (pdata != NULL) { + pchip->pdata = pdata; + pchip->mphase = pdata->mphase; + } else { + pchip->pdata = devm_kzalloc(pchip->dev, + sizeof(struct lp8755_platform_data), + GFP_KERNEL); + if (!pchip->pdata) + return -ENOMEM; + ret = lp8755_init_data(pchip); + if (ret < 0) + goto err_chip_init; + } + + ret = lp8755_regulator_init(pchip); + if (ret < 0) + goto err_regulator; + + pchip->irq = client->irq; + ret = lp8755_int_config(pchip); + if (ret < 0) + goto err_irq; + + return ret; + +err_irq: + dev_err(&client->dev, "fail to irq config\n"); + + for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) + regulator_unregister(pchip->rdev[icnt]); + +err_regulator: + dev_err(&client->dev, "fail to initialize regulators\n"); + /* output disable */ + for (icnt = 0; icnt < 0x06; icnt++) + lp8755_write(pchip, icnt, 0x00); + +err_chip_init: + dev_err(&client->dev, "fail to initialize chip\n"); + return ret; +} + +static int lp8755_remove(struct i2c_client *client) +{ + int icnt; + struct lp8755_chip *pchip = i2c_get_clientdata(client); + + for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) + regulator_unregister(pchip->rdev[icnt]); + + for (icnt = 0; icnt < 0x06; icnt++) + lp8755_write(pchip, icnt, 0x00); + + if (pchip->irq != 0) + free_irq(pchip->irq, pchip); + + return 0; +} + +static const struct i2c_device_id lp8755_id[] = { + {LP8755_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lp8755_id); + +static struct i2c_driver lp8755_i2c_driver = { + .driver = { + .name = LP8755_NAME, + }, + .probe = lp8755_probe, + .remove = __devexit_p(lp8755_remove), + .id_table = lp8755_id, +}; + +static int __init lp8755_init(void) +{ + return i2c_add_driver(&lp8755_i2c_driver); +} + +subsys_initcall(lp8755_init); + +static void __exit lp8755_exit(void) +{ + i2c_del_driver(&lp8755_i2c_driver); +} + +module_exit(lp8755_exit); + +MODULE_DESCRIPTION("Texas Instruments lp8755 driver"); +MODULE_AUTHOR("Daniel Jeong "); +MODULE_LICENSE("GPL v2"); -- cgit