From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/scsi/a100u2w.c | 1202 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1202 insertions(+) create mode 100644 drivers/scsi/a100u2w.c (limited to 'drivers/scsi/a100u2w.c') diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c new file mode 100644 index 000000000000..c34403c30483 --- /dev/null +++ b/drivers/scsi/a100u2w.c @@ -0,0 +1,1202 @@ +/* + * Initio A100 device driver for Linux. + * + * Copyright (c) 1994-1998 Initio Corporation + * Copyright (c) 2003-2004 Christoph Hellwig + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * -------------------------------------------------------------------------- + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification, immediately at the beginning of the file. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Where this Software is combined with software released under the terms of + * the GNU General Public License ("GPL") and the terms of the GPL would require the + * combined work to also be released under the terms of the GPL, the terms + * and conditions of this License will apply in addition to those of the + * GPL with the exception of any terms or conditions of this License that + * conflict with, or are expressly prohibited by, the GPL. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/* + * Revision History: + * 07/02/98 hl - v.91n Initial drivers. + * 09/14/98 hl - v1.01 Support new Kernel. + * 09/22/98 hl - v1.01a Support reset. + * 09/24/98 hl - v1.01b Fixed reset. + * 10/05/98 hl - v1.02 split the source code and release. + * 12/19/98 bv - v1.02a Use spinlocks for 2.1.95 and up + * 01/31/99 bv - v1.02b Use mdelay instead of waitForPause + * 08/08/99 bv - v1.02c Use waitForPause again. + * 06/25/02 Doug Ledford - v1.02d + * - Remove limit on number of controllers + * - Port to DMA mapping API + * - Clean up interrupt handler registration + * - Fix memory leaks + * - Fix allocation of scsi host structs and private data + * 11/18/03 Christoph Hellwig + * - Port to new probing API + * - Fix some more leaks in init failure cases + * 9/28/04 Christoph Hellwig + * - merge the two source files + * - remove internal queueing code + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#include "a100u2w.h" + + +#define JIFFIES_TO_MS(t) ((t) * 1000 / HZ) +#define MS_TO_JIFFIES(j) ((j * HZ) / 1000) + +static ORC_SCB *orc_alloc_scb(ORC_HCS * hcsp); +static void inia100SCBPost(BYTE * pHcb, BYTE * pScb); + +static NVRAM nvram, *nvramp = &nvram; +static UCHAR dftNvRam[64] = +{ +/*----------header -------------*/ + 0x01, /* 0x00: Sub System Vendor ID 0 */ + 0x11, /* 0x01: Sub System Vendor ID 1 */ + 0x60, /* 0x02: Sub System ID 0 */ + 0x10, /* 0x03: Sub System ID 1 */ + 0x00, /* 0x04: SubClass */ + 0x01, /* 0x05: Vendor ID 0 */ + 0x11, /* 0x06: Vendor ID 1 */ + 0x60, /* 0x07: Device ID 0 */ + 0x10, /* 0x08: Device ID 1 */ + 0x00, /* 0x09: Reserved */ + 0x00, /* 0x0A: Reserved */ + 0x01, /* 0x0B: Revision of Data Structure */ + /* -- Host Adapter Structure --- */ + 0x01, /* 0x0C: Number Of SCSI Channel */ + 0x01, /* 0x0D: BIOS Configuration 1 */ + 0x00, /* 0x0E: BIOS Configuration 2 */ + 0x00, /* 0x0F: BIOS Configuration 3 */ + /* --- SCSI Channel 0 Configuration --- */ + 0x07, /* 0x10: H/A ID */ + 0x83, /* 0x11: Channel Configuration */ + 0x20, /* 0x12: MAX TAG per target */ + 0x0A, /* 0x13: SCSI Reset Recovering time */ + 0x00, /* 0x14: Channel Configuration4 */ + 0x00, /* 0x15: Channel Configuration5 */ + /* SCSI Channel 0 Target Configuration */ + /* 0x16-0x25 */ + 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, + 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, + /* --- SCSI Channel 1 Configuration --- */ + 0x07, /* 0x26: H/A ID */ + 0x83, /* 0x27: Channel Configuration */ + 0x20, /* 0x28: MAX TAG per target */ + 0x0A, /* 0x29: SCSI Reset Recovering time */ + 0x00, /* 0x2A: Channel Configuration4 */ + 0x00, /* 0x2B: Channel Configuration5 */ + /* SCSI Channel 1 Target Configuration */ + /* 0x2C-0x3B */ + 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, + 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, 0xC8, + 0x00, /* 0x3C: Reserved */ + 0x00, /* 0x3D: Reserved */ + 0x00, /* 0x3E: Reserved */ + 0x00 /* 0x3F: Checksum */ +}; + + +/***************************************************************************/ +static void waitForPause(unsigned amount) +{ + ULONG the_time = jiffies + MS_TO_JIFFIES(amount); + while (time_before_eq(jiffies, the_time)) + cpu_relax(); +} + +/***************************************************************************/ +static UCHAR waitChipReady(ORC_HCS * hcsp) +{ + int i; + + for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */ + if (ORC_RD(hcsp->HCS_Base, ORC_HCTRL) & HOSTSTOP) /* Wait HOSTSTOP set */ + return 1; + waitForPause(100); /* wait 100ms before try again */ + } + return 0; +} + +/***************************************************************************/ +static UCHAR waitFWReady(ORC_HCS * hcsp) +{ + int i; + + for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */ + if (ORC_RD(hcsp->HCS_Base, ORC_HSTUS) & RREADY) /* Wait READY set */ + return 1; + waitForPause(100); /* wait 100ms before try again */ + } + return 0; +} + +/***************************************************************************/ +static UCHAR waitSCSIRSTdone(ORC_HCS * hcsp) +{ + int i; + + for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */ + if (!(ORC_RD(hcsp->HCS_Base, ORC_HCTRL) & SCSIRST)) /* Wait SCSIRST done */ + return 1; + waitForPause(100); /* wait 100ms before try again */ + } + return 0; +} + +/***************************************************************************/ +static UCHAR waitHDOoff(ORC_HCS * hcsp) +{ + int i; + + for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */ + if (!(ORC_RD(hcsp->HCS_Base, ORC_HCTRL) & HDO)) /* Wait HDO off */ + return 1; + waitForPause(100); /* wait 100ms before try again */ + } + return 0; +} + +/***************************************************************************/ +static UCHAR waitHDIset(ORC_HCS * hcsp, UCHAR * pData) +{ + int i; + + for (i = 0; i < 10; i++) { /* Wait 1 second for report timeout */ + if ((*pData = ORC_RD(hcsp->HCS_Base, ORC_HSTUS)) & HDI) + return 1; /* Wait HDI set */ + waitForPause(100); /* wait 100ms before try again */ + } + return 0; +} + +/***************************************************************************/ +static unsigned short get_FW_version(ORC_HCS * hcsp) +{ + UCHAR bData; + union { + unsigned short sVersion; + unsigned char cVersion[2]; + } Version; + + ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_VERSION); + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); + if (waitHDOoff(hcsp) == 0) /* Wait HDO off */ + return 0; + + if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */ + return 0; + Version.cVersion[0] = ORC_RD(hcsp->HCS_Base, ORC_HDATA); + ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */ + + if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */ + return 0; + Version.cVersion[1] = ORC_RD(hcsp->HCS_Base, ORC_HDATA); + ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */ + + return (Version.sVersion); +} + +/***************************************************************************/ +static UCHAR set_NVRAM(ORC_HCS * hcsp, unsigned char address, unsigned char value) +{ + ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_SET_NVM); /* Write command */ + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); + if (waitHDOoff(hcsp) == 0) /* Wait HDO off */ + return 0; + + ORC_WR(hcsp->HCS_Base + ORC_HDATA, address); /* Write address */ + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); + if (waitHDOoff(hcsp) == 0) /* Wait HDO off */ + return 0; + + ORC_WR(hcsp->HCS_Base + ORC_HDATA, value); /* Write value */ + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); + if (waitHDOoff(hcsp) == 0) /* Wait HDO off */ + return 0; + + return 1; +} + +/***************************************************************************/ +static UCHAR get_NVRAM(ORC_HCS * hcsp, unsigned char address, unsigned char *pDataIn) +{ + unsigned char bData; + + ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_GET_NVM); /* Write command */ + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); + if (waitHDOoff(hcsp) == 0) /* Wait HDO off */ + return 0; + + ORC_WR(hcsp->HCS_Base + ORC_HDATA, address); /* Write address */ + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); + if (waitHDOoff(hcsp) == 0) /* Wait HDO off */ + return 0; + + if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */ + return 0; + *pDataIn = ORC_RD(hcsp->HCS_Base, ORC_HDATA); + ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */ + + return 1; +} + +/***************************************************************************/ +static void orc_exec_scb(ORC_HCS * hcsp, ORC_SCB * scbp) +{ + scbp->SCB_Status = ORCSCB_POST; + ORC_WR(hcsp->HCS_Base + ORC_PQUEUE, scbp->SCB_ScbIdx); + return; +} + + +/*********************************************************************** + Read SCSI H/A configuration parameters from serial EEPROM +************************************************************************/ +static int se2_rd_all(ORC_HCS * hcsp) +{ + int i; + UCHAR *np, chksum = 0; + + np = (UCHAR *) nvramp; + for (i = 0; i < 64; i++, np++) { /* <01> */ + if (get_NVRAM(hcsp, (unsigned char) i, np) == 0) + return -1; +// *np++ = get_NVRAM(hcsp, (unsigned char ) i); + } + +/*------ Is ckecksum ok ? ------*/ + np = (UCHAR *) nvramp; + for (i = 0; i < 63; i++) + chksum += *np++; + + if (nvramp->CheckSum != (UCHAR) chksum) + return -1; + return 1; +} + +/************************************************************************ + Update SCSI H/A configuration parameters from serial EEPROM +*************************************************************************/ +static void se2_update_all(ORC_HCS * hcsp) +{ /* setup default pattern */ + int i; + UCHAR *np, *np1, chksum = 0; + + /* Calculate checksum first */ + np = (UCHAR *) dftNvRam; + for (i = 0; i < 63; i++) + chksum += *np++; + *np = chksum; + + np = (UCHAR *) dftNvRam; + np1 = (UCHAR *) nvramp; + for (i = 0; i < 64; i++, np++, np1++) { + if (*np != *np1) { + set_NVRAM(hcsp, (unsigned char) i, *np); + } + } + return; +} + +/************************************************************************* + Function name : read_eeprom +**************************************************************************/ +static void read_eeprom(ORC_HCS * hcsp) +{ + if (se2_rd_all(hcsp) != 1) { + se2_update_all(hcsp); /* setup default pattern */ + se2_rd_all(hcsp); /* load again */ + } +} + + +/***************************************************************************/ +static UCHAR load_FW(ORC_HCS * hcsp) +{ + U32 dData; + USHORT wBIOSAddress; + USHORT i; + UCHAR *pData, bData; + + + bData = ORC_RD(hcsp->HCS_Base, ORC_GCFG); + ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData | EEPRG); /* Enable EEPROM programming */ + ORC_WR(hcsp->HCS_Base + ORC_EBIOSADR2, 0x00); + ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x00); + if (ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA) != 0x55) { + ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /* Disable EEPROM programming */ + return 0; + } + ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x01); + if (ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA) != 0xAA) { + ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /* Disable EEPROM programming */ + return 0; + } + ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST | DOWNLOAD); /* Enable SRAM programming */ + pData = (UCHAR *) & dData; + dData = 0; /* Initial FW address to 0 */ + ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x10); + *pData = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */ + ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x11); + *(pData + 1) = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */ + ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, 0x12); + *(pData + 2) = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */ + ORC_WR(hcsp->HCS_Base + ORC_EBIOSADR2, *(pData + 2)); + ORC_WRLONG(hcsp->HCS_Base + ORC_FWBASEADR, dData); /* Write FW address */ + + wBIOSAddress = (USHORT) dData; /* FW code locate at BIOS address + ? */ + for (i = 0, pData = (UCHAR *) & dData; /* Download the code */ + i < 0x1000; /* Firmware code size = 4K */ + i++, wBIOSAddress++) { + ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, wBIOSAddress); + *pData++ = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */ + if ((i % 4) == 3) { + ORC_WRLONG(hcsp->HCS_Base + ORC_RISCRAM, dData); /* Write every 4 bytes */ + pData = (UCHAR *) & dData; + } + } + + ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST | DOWNLOAD); /* Reset program count 0 */ + wBIOSAddress -= 0x1000; /* Reset the BIOS adddress */ + for (i = 0, pData = (UCHAR *) & dData; /* Check the code */ + i < 0x1000; /* Firmware code size = 4K */ + i++, wBIOSAddress++) { + ORC_WRSHORT(hcsp->HCS_Base + ORC_EBIOSADR0, wBIOSAddress); + *pData++ = ORC_RD(hcsp->HCS_Base, ORC_EBIOSDATA); /* Read from BIOS */ + if ((i % 4) == 3) { + if (ORC_RDLONG(hcsp->HCS_Base, ORC_RISCRAM) != dData) { + ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST); /* Reset program to 0 */ + ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /*Disable EEPROM programming */ + return 0; + } + pData = (UCHAR *) & dData; + } + } + ORC_WR(hcsp->HCS_Base + ORC_RISCCTL, PRGMRST); /* Reset program to 0 */ + ORC_WR(hcsp->HCS_Base + ORC_GCFG, bData); /* Disable EEPROM programming */ + return 1; +} + +/***************************************************************************/ +static void setup_SCBs(ORC_HCS * hcsp) +{ + ORC_SCB *pVirScb; + int i; + ESCB *pVirEscb; + dma_addr_t pPhysEscb; + + /* Setup SCB HCS_Base and SCB Size registers */ + ORC_WR(hcsp->HCS_Base + ORC_SCBSIZE, ORC_MAXQUEUE); /* Total number of SCBs */ + /* SCB HCS_Base address 0 */ + ORC_WRLONG(hcsp->HCS_Base + ORC_SCBBASE0, hcsp->HCS_physScbArray); + /* SCB HCS_Base address 1 */ + ORC_WRLONG(hcsp->HCS_Base + ORC_SCBBASE1, hcsp->HCS_physScbArray); + + /* setup scatter list address with one buffer */ + pVirScb = hcsp->HCS_virScbArray; + pVirEscb = hcsp->HCS_virEscbArray; + + for (i = 0; i < ORC_MAXQUEUE; i++) { + pPhysEscb = (hcsp->HCS_physEscbArray + (sizeof(ESCB) * i)); + pVirScb->SCB_SGPAddr = (U32) pPhysEscb; + pVirScb->SCB_SensePAddr = (U32) pPhysEscb; + pVirScb->SCB_EScb = pVirEscb; + pVirScb->SCB_ScbIdx = i; + pVirScb++; + pVirEscb++; + } + + return; +} + +/***************************************************************************/ +static void initAFlag(ORC_HCS * hcsp) +{ + UCHAR i, j; + + for (i = 0; i < MAX_CHANNELS; i++) { + for (j = 0; j < 8; j++) { + hcsp->BitAllocFlag[i][j] = 0xffffffff; + } + } +} + +/***************************************************************************/ +static int init_orchid(ORC_HCS * hcsp) +{ + UBYTE *readBytep; + USHORT revision; + UCHAR i; + + initAFlag(hcsp); + ORC_WR(hcsp->HCS_Base + ORC_GIMSK, 0xFF); /* Disable all interrupt */ + if (ORC_RD(hcsp->HCS_Base, ORC_HSTUS) & RREADY) { /* Orchid is ready */ + revision = get_FW_version(hcsp); + if (revision == 0xFFFF) { + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, DEVRST); /* Reset Host Adapter */ + if (waitChipReady(hcsp) == 0) + return (-1); + load_FW(hcsp); /* Download FW */ + setup_SCBs(hcsp); /* Setup SCB HCS_Base and SCB Size registers */ + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, 0); /* clear HOSTSTOP */ + if (waitFWReady(hcsp) == 0) + return (-1); + /* Wait for firmware ready */ + } else { + setup_SCBs(hcsp); /* Setup SCB HCS_Base and SCB Size registers */ + } + } else { /* Orchid is not Ready */ + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, DEVRST); /* Reset Host Adapter */ + if (waitChipReady(hcsp) == 0) + return (-1); + load_FW(hcsp); /* Download FW */ + setup_SCBs(hcsp); /* Setup SCB HCS_Base and SCB Size registers */ + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); /* Do Hardware Reset & */ + + /* clear HOSTSTOP */ + if (waitFWReady(hcsp) == 0) /* Wait for firmware ready */ + return (-1); + } + +/*------------- get serial EEProm settting -------*/ + + read_eeprom(hcsp); + + if (nvramp->Revision != 1) + return (-1); + + hcsp->HCS_SCSI_ID = nvramp->SCSI0Id; + hcsp->HCS_BIOS = nvramp->BIOSConfig1; + hcsp->HCS_MaxTar = MAX_TARGETS; + readBytep = (UCHAR *) & (nvramp->Target00Config); + for (i = 0; i < 16; readBytep++, i++) { + hcsp->TargetFlag[i] = *readBytep; + hcsp->MaximumTags[i] = ORC_MAXTAGS; + } /* for */ + + if (nvramp->SCSI0Config & NCC_BUSRESET) { /* Reset SCSI bus */ + hcsp->HCS_Flags |= HCF_SCSI_RESET; + } + ORC_WR(hcsp->HCS_Base + ORC_GIMSK, 0xFB); /* enable RP FIFO interrupt */ + return (0); +} + +/***************************************************************************** + Function name : orc_reset_scsi_bus + Description : Reset registers, reset a hanging bus and + kill active and disconnected commands for target w/o soft reset + Input : pHCB - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int orc_reset_scsi_bus(ORC_HCS * pHCB) +{ /* I need Host Control Block Information */ + ULONG flags; + + spin_lock_irqsave(&(pHCB->BitAllocFlagLock), flags); + + initAFlag(pHCB); + /* reset scsi bus */ + ORC_WR(pHCB->HCS_Base + ORC_HCTRL, SCSIRST); + if (waitSCSIRSTdone(pHCB) == 0) { + spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags); + return FAILED; + } else { + spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags); + return SUCCESS; + } +} + +/***************************************************************************** + Function name : orc_device_reset + Description : Reset registers, reset a hanging bus and + kill active and disconnected commands for target w/o soft reset + Input : pHCB - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int orc_device_reset(ORC_HCS * pHCB, struct scsi_cmnd *SCpnt, unsigned int target) +{ /* I need Host Control Block Information */ + ORC_SCB *pScb; + ESCB *pVirEscb; + ORC_SCB *pVirScb; + UCHAR i; + ULONG flags; + + spin_lock_irqsave(&(pHCB->BitAllocFlagLock), flags); + pScb = (ORC_SCB *) NULL; + pVirEscb = (ESCB *) NULL; + + /* setup scatter list address with one buffer */ + pVirScb = pHCB->HCS_virScbArray; + + initAFlag(pHCB); + /* device reset */ + for (i = 0; i < ORC_MAXQUEUE; i++) { + pVirEscb = pVirScb->SCB_EScb; + if ((pVirScb->SCB_Status) && (pVirEscb->SCB_Srb == SCpnt)) + break; + pVirScb++; + } + + if (i == ORC_MAXQUEUE) { + printk("Unable to Reset - No SCB Found\n"); + spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags); + return FAILED; + } + if ((pScb = orc_alloc_scb(pHCB)) == NULL) { + spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags); + return FAILED; + } + pScb->SCB_Opcode = ORC_BUSDEVRST; + pScb->SCB_Target = target; + pScb->SCB_HaStat = 0; + pScb->SCB_TaStat = 0; + pScb->SCB_Status = 0x0; + pScb->SCB_Link = 0xFF; + pScb->SCB_Reserved0 = 0; + pScb->SCB_Reserved1 = 0; + pScb->SCB_XferLen = 0; + pScb->SCB_SGLen = 0; + + pVirEscb->SCB_Srb = NULL; + pVirEscb->SCB_Srb = SCpnt; + orc_exec_scb(pHCB, pScb); /* Start execute SCB */ + spin_unlock_irqrestore(&(pHCB->BitAllocFlagLock), flags); + return SUCCESS; +} + + +/***************************************************************************/ +static ORC_SCB *__orc_alloc_scb(ORC_HCS * hcsp) +{ + ORC_SCB *pTmpScb; + UCHAR Ch; + ULONG idx; + UCHAR index; + UCHAR i; + + Ch = hcsp->HCS_Index; + for (i = 0; i < 8; i++) { + for (index = 0; index < 32; index++) { + if ((hcsp->BitAllocFlag[Ch][i] >> index) & 0x01) { + hcsp->BitAllocFlag[Ch][i] &= ~(1 << index); + break; + } + } + idx = index + 32 * i; + pTmpScb = (ORC_SCB *) ((ULONG) hcsp->HCS_virScbArray + (idx * sizeof(ORC_SCB))); + return (pTmpScb); + } + return (NULL); +} + +static ORC_SCB *orc_alloc_scb(ORC_HCS * hcsp) +{ + ORC_SCB *pTmpScb; + ULONG flags; + + spin_lock_irqsave(&(hcsp->BitAllocFlagLock), flags); + pTmpScb = __orc_alloc_scb(hcsp); + spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags); + return (pTmpScb); +} + + +/***************************************************************************/ +static void orc_release_scb(ORC_HCS * hcsp, ORC_SCB * scbp) +{ + ULONG flags; + UCHAR Index; + UCHAR i; + UCHAR Ch; + + spin_lock_irqsave(&(hcsp->BitAllocFlagLock), flags); + Ch = hcsp->HCS_Index; + Index = scbp->SCB_ScbIdx; + i = Index / 32; + Index %= 32; + hcsp->BitAllocFlag[Ch][i] |= (1 << Index); + spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags); +} + +/***************************************************************************** + Function name : abort_SCB + Description : Abort a queued command. + (commands that are on the bus can't be aborted easily) + Input : pHCB - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int abort_SCB(ORC_HCS * hcsp, ORC_SCB * pScb) +{ + unsigned char bData, bStatus; + + ORC_WR(hcsp->HCS_Base + ORC_HDATA, ORC_CMD_ABORT_SCB); /* Write command */ + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); + if (waitHDOoff(hcsp) == 0) /* Wait HDO off */ + return 0; + + ORC_WR(hcsp->HCS_Base + ORC_HDATA, pScb->SCB_ScbIdx); /* Write address */ + ORC_WR(hcsp->HCS_Base + ORC_HCTRL, HDO); + if (waitHDOoff(hcsp) == 0) /* Wait HDO off */ + return 0; + + if (waitHDIset(hcsp, &bData) == 0) /* Wait HDI set */ + return 0; + bStatus = ORC_RD(hcsp->HCS_Base, ORC_HDATA); + ORC_WR(hcsp->HCS_Base + ORC_HSTUS, bData); /* Clear HDI */ + + if (bStatus == 1) /* 0 - Successfully */ + return 0; /* 1 - Fail */ + return 1; +} + +/***************************************************************************** + Function name : inia100_abort + Description : Abort a queued command. + (commands that are on the bus can't be aborted easily) + Input : pHCB - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int orc_abort_srb(ORC_HCS * hcsp, struct scsi_cmnd *SCpnt) +{ + ESCB *pVirEscb; + ORC_SCB *pVirScb; + UCHAR i; + ULONG flags; + + spin_lock_irqsave(&(hcsp->BitAllocFlagLock), flags); + + pVirScb = hcsp->HCS_virScbArray; + + for (i = 0; i < ORC_MAXQUEUE; i++, pVirScb++) { + pVirEscb = pVirScb->SCB_EScb; + if ((pVirScb->SCB_Status) && (pVirEscb->SCB_Srb == SCpnt)) { + if (pVirScb->SCB_TagMsg == 0) { + spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags); + return FAILED; + } else { + if (abort_SCB(hcsp, pVirScb)) { + pVirEscb->SCB_Srb = NULL; + spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags); + return SUCCESS; + } else { + spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags); + return FAILED; + } + } + } + } + spin_unlock_irqrestore(&(hcsp->BitAllocFlagLock), flags); + return FAILED; +} + +/*********************************************************************** + Routine Description: + This is the interrupt service routine for the Orchid SCSI adapter. + It reads the interrupt register to determine if the adapter is indeed + the source of the interrupt and clears the interrupt at the device. + Arguments: + HwDeviceExtension - HBA miniport driver's adapter data storage + Return Value: +***********************************************************************/ +static void orc_interrupt( + ORC_HCS * hcsp +) +{ + BYTE bScbIdx; + ORC_SCB *pScb; + + if (ORC_RD(hcsp->HCS_Base, ORC_RQUEUECNT) == 0) { + return; // 0; + + } + do { + bScbIdx = ORC_RD(hcsp->HCS_Base, ORC_RQUEUE); + + pScb = (ORC_SCB *) ((ULONG) hcsp->HCS_virScbArray + (ULONG) (sizeof(ORC_SCB) * bScbIdx)); + pScb->SCB_Status = 0x0; + + inia100SCBPost((BYTE *) hcsp, (BYTE *) pScb); + } while (ORC_RD(hcsp->HCS_Base, ORC_RQUEUECNT)); + return; //1; + +} /* End of I1060Interrupt() */ + +/***************************************************************************** + Function name : inia100BuildSCB + Description : + Input : pHCB - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static void inia100BuildSCB(ORC_HCS * pHCB, ORC_SCB * pSCB, struct scsi_cmnd * SCpnt) +{ /* Create corresponding SCB */ + struct scatterlist *pSrbSG; + ORC_SG *pSG; /* Pointer to SG list */ + int i, count_sg; + ESCB *pEScb; + + pEScb = pSCB->SCB_EScb; + pEScb->SCB_Srb = SCpnt; + pSG = NULL; + + pSCB->SCB_Opcode = ORC_EXECSCSI; + pSCB->SCB_Flags = SCF_NO_DCHK; /* Clear done bit */ + pSCB->SCB_Target = SCpnt->device->id; + pSCB->SCB_Lun = SCpnt->device->lun; + pSCB->SCB_Reserved0 = 0; + pSCB->SCB_Reserved1 = 0; + pSCB->SCB_SGLen = 0; + + if ((pSCB->SCB_XferLen = (U32) SCpnt->request_bufflen)) { + pSG = (ORC_SG *) & pEScb->ESCB_SGList[0]; + if (SCpnt->use_sg) { + pSrbSG = (struct scatterlist *) SCpnt->request_buffer; + count_sg = pci_map_sg(pHCB->pdev, pSrbSG, SCpnt->use_sg, + SCpnt->sc_data_direction); + pSCB->SCB_SGLen = (U32) (count_sg * 8); + for (i = 0; i < count_sg; i++, pSG++, pSrbSG++) { + pSG->SG_Ptr = (U32) sg_dma_address(pSrbSG); + pSG->SG_Len = (U32) sg_dma_len(pSrbSG); + } + } else if (SCpnt->request_bufflen != 0) {/* Non SG */ + pSCB->SCB_SGLen = 0x8; + SCpnt->SCp.dma_handle = pci_map_single(pHCB->pdev, + SCpnt->request_buffer, + SCpnt->request_bufflen, + SCpnt->sc_data_direction); + pSG->SG_Ptr = (U32) SCpnt->SCp.dma_handle; + pSG->SG_Len = (U32) SCpnt->request_bufflen; + } else { + pSCB->SCB_SGLen = 0; + pSG->SG_Ptr = 0; + pSG->SG_Len = 0; + } + } + pSCB->SCB_SGPAddr = (U32) pSCB->SCB_SensePAddr; + pSCB->SCB_HaStat = 0; + pSCB->SCB_TaStat = 0; + pSCB->SCB_Link = 0xFF; + pSCB->SCB_SenseLen = SENSE_SIZE; + pSCB->SCB_CDBLen = SCpnt->cmd_len; + if (pSCB->SCB_CDBLen >= IMAX_CDB) { + printk("max cdb length= %x\b", SCpnt->cmd_len); + pSCB->SCB_CDBLen = IMAX_CDB; + } + pSCB->SCB_Ident = SCpnt->device->lun | DISC_ALLOW; + if (SCpnt->device->tagged_supported) { /* Tag Support */ + pSCB->SCB_TagMsg = SIMPLE_QUEUE_TAG; /* Do simple tag only */ + } else { + pSCB->SCB_TagMsg = 0; /* No tag support */ + } + memcpy(&pSCB->SCB_CDB[0], &SCpnt->cmnd, pSCB->SCB_CDBLen); + return; +} + +/***************************************************************************** + Function name : inia100_queue + Description : Queue a command and setup interrupts for a free bus. + Input : pHCB - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int inia100_queue(struct scsi_cmnd * SCpnt, void (*done) (struct scsi_cmnd *)) +{ + register ORC_SCB *pSCB; + ORC_HCS *pHCB; /* Point to Host adapter control block */ + + pHCB = (ORC_HCS *) SCpnt->device->host->hostdata; + SCpnt->scsi_done = done; + /* Get free SCSI control block */ + if ((pSCB = orc_alloc_scb(pHCB)) == NULL) + return SCSI_MLQUEUE_HOST_BUSY; + + inia100BuildSCB(pHCB, pSCB, SCpnt); + orc_exec_scb(pHCB, pSCB); /* Start execute SCB */ + + return (0); +} + +/***************************************************************************** + Function name : inia100_abort + Description : Abort a queued command. + (commands that are on the bus can't be aborted easily) + Input : pHCB - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int inia100_abort(struct scsi_cmnd * SCpnt) +{ + ORC_HCS *hcsp; + + hcsp = (ORC_HCS *) SCpnt->device->host->hostdata; + return orc_abort_srb(hcsp, SCpnt); +} + +/***************************************************************************** + Function name : inia100_reset + Description : Reset registers, reset a hanging bus and + kill active and disconnected commands for target w/o soft reset + Input : pHCB - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int inia100_bus_reset(struct scsi_cmnd * SCpnt) +{ /* I need Host Control Block Information */ + ORC_HCS *pHCB; + pHCB = (ORC_HCS *) SCpnt->device->host->hostdata; + return orc_reset_scsi_bus(pHCB); +} + +/***************************************************************************** + Function name : inia100_device_reset + Description : Reset the device + Input : pHCB - Pointer to host adapter structure + Output : None. + Return : pSRB - Pointer to SCSI request block. +*****************************************************************************/ +static int inia100_device_reset(struct scsi_cmnd * SCpnt) +{ /* I need Host Control Block Information */ + ORC_HCS *pHCB; + pHCB = (ORC_HCS *) SCpnt->device->host->hostdata; + return orc_device_reset(pHCB, SCpnt, SCpnt->device->id); + +} + +/***************************************************************************** + Function name : inia100SCBPost + Description : This is callback routine be called when orc finish one + SCSI command. + Input : pHCB - Pointer to host adapter control block. + pSCB - Pointer to SCSI control block. + Output : None. + Return : None. +*****************************************************************************/ +static void inia100SCBPost(BYTE * pHcb, BYTE * pScb) +{ + struct scsi_cmnd *pSRB; /* Pointer to SCSI request block */ + ORC_HCS *pHCB; + ORC_SCB *pSCB; + ESCB *pEScb; + + pHCB = (ORC_HCS *) pHcb; + pSCB = (ORC_SCB *) pScb; + pEScb = pSCB->SCB_EScb; + if ((pSRB = (struct scsi_cmnd *) pEScb->SCB_Srb) == 0) { + printk("inia100SCBPost: SRB pointer is empty\n"); + orc_release_scb(pHCB, pSCB); /* Release SCB for current channel */ + return; + } + pEScb->SCB_Srb = NULL; + + switch (pSCB->SCB_HaStat) { + case 0x0: + case 0xa: /* Linked command complete without error and linked normally */ + case 0xb: /* Linked command complete without error interrupt generated */ + pSCB->SCB_HaStat = 0; + break; + + case 0x11: /* Selection time out-The initiator selection or target + reselection was not complete within the SCSI Time out period */ + pSCB->SCB_HaStat = DID_TIME_OUT; + break; + + case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus + phase sequence was requested by the target. The host adapter + will generate a SCSI Reset Condition, notifying the host with + a SCRD interrupt */ + pSCB->SCB_HaStat = DID_RESET; + break; + + case 0x1a: /* SCB Aborted. 07/21/98 */ + pSCB->SCB_HaStat = DID_ABORT; + break; + + case 0x12: /* Data overrun/underrun-The target attempted to transfer more data + than was allocated by the Data Length field or the sum of the + Scatter / Gather Data Length fields. */ + case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */ + case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid. */ + + default: + printk("inia100: %x %x\n", pSCB->SCB_HaStat, pSCB->SCB_TaStat); + pSCB->SCB_HaStat = DID_ERROR; /* Couldn't find any better */ + break; + } + + if (pSCB->SCB_TaStat == 2) { /* Check condition */ + memcpy((unsigned char *) &pSRB->sense_buffer[0], + (unsigned char *) &pEScb->ESCB_SGList[0], SENSE_SIZE); + } + pSRB->result = pSCB->SCB_TaStat | (pSCB->SCB_HaStat << 16); + + if (pSRB->use_sg) { + pci_unmap_sg(pHCB->pdev, + (struct scatterlist *)pSRB->request_buffer, + pSRB->use_sg, pSRB->sc_data_direction); + } else if (pSRB->request_bufflen != 0) { + pci_unmap_single(pHCB->pdev, pSRB->SCp.dma_handle, + pSRB->request_bufflen, + pSRB->sc_data_direction); + } + + pSRB->scsi_done(pSRB); /* Notify system DONE */ + + orc_release_scb(pHCB, pSCB); /* Release SCB for current channel */ +} + +/* + * Interrupt handler (main routine of the driver) + */ +static irqreturn_t inia100_intr(int irqno, void *devid, struct pt_regs *regs) +{ + struct Scsi_Host *host = (struct Scsi_Host *)devid; + ORC_HCS *pHcb = (ORC_HCS *)host->hostdata; + unsigned long flags; + + spin_lock_irqsave(host->host_lock, flags); + orc_interrupt(pHcb); + spin_unlock_irqrestore(host->host_lock, flags); + + return IRQ_HANDLED; +} + +static struct scsi_host_template inia100_template = { + .proc_name = "inia100", + .name = inia100_REVID, + .queuecommand = inia100_queue, + .eh_abort_handler = inia100_abort, + .eh_bus_reset_handler = inia100_bus_reset, + .eh_device_reset_handler = inia100_device_reset, + .can_queue = 1, + .this_id = 1, + .sg_tablesize = SG_ALL, + .cmd_per_lun = 1, + .use_clustering = ENABLE_CLUSTERING, +}; + +static int __devinit inia100_probe_one(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct Scsi_Host *shost; + ORC_HCS *pHCB; + unsigned long port, bios; + int error = -ENODEV; + u32 sz; + unsigned long dBiosAdr; + char *pbBiosAdr; + + if (pci_enable_device(pdev)) + goto out; + if (pci_set_dma_mask(pdev, 0xffffffffULL)) { + printk(KERN_WARNING "Unable to set 32bit DMA " + "on inia100 adapter, ignoring.\n"); + goto out_disable_device; + } + + pci_set_master(pdev); + + port = pci_resource_start(pdev, 0); + if (!request_region(port, 256, "inia100")) { + printk(KERN_WARNING "inia100: io port 0x%lx, is busy.\n", port); + goto out_disable_device; + } + + /* <02> read from base address + 0x50 offset to get the bios balue. */ + bios = ORC_RDWORD(port, 0x50); + + + shost = scsi_host_alloc(&inia100_template, sizeof(ORC_HCS)); + if (!shost) + goto out_release_region; + + pHCB = (ORC_HCS *)shost->hostdata; + pHCB->pdev = pdev; + pHCB->HCS_Base = port; + pHCB->HCS_BIOS = bios; + spin_lock_init(&pHCB->BitAllocFlagLock); + + /* Get total memory needed for SCB */ + sz = ORC_MAXQUEUE * sizeof(ORC_SCB); + pHCB->HCS_virScbArray = pci_alloc_consistent(pdev, sz, + &pHCB->HCS_physScbArray); + if (!pHCB->HCS_virScbArray) { + printk("inia100: SCB memory allocation error\n"); + goto out_host_put; + } + memset(pHCB->HCS_virScbArray, 0, sz); + + /* Get total memory needed for ESCB */ + sz = ORC_MAXQUEUE * sizeof(ESCB); + pHCB->HCS_virEscbArray = pci_alloc_consistent(pdev, sz, + &pHCB->HCS_physEscbArray); + if (!pHCB->HCS_virEscbArray) { + printk("inia100: ESCB memory allocation error\n"); + goto out_free_scb_array; + } + memset(pHCB->HCS_virEscbArray, 0, sz); + + dBiosAdr = pHCB->HCS_BIOS; + dBiosAdr = (dBiosAdr << 4); + pbBiosAdr = phys_to_virt(dBiosAdr); + if (init_orchid(pHCB)) { /* Initialize orchid chip */ + printk("inia100: initial orchid fail!!\n"); + goto out_free_escb_array; + } + + shost->io_port = pHCB->HCS_Base; + shost->n_io_port = 0xff; + shost->can_queue = ORC_MAXQUEUE; + shost->unique_id = shost->io_port; + shost->max_id = pHCB->HCS_MaxTar; + shost->max_lun = 16; + shost->irq = pHCB->HCS_Intr = pdev->irq; + shost->this_id = pHCB->HCS_SCSI_ID; /* Assign HCS index */ + shost->sg_tablesize = TOTAL_SG_ENTRY; + + /* Initial orc chip */ + error = request_irq(pdev->irq, inia100_intr, SA_SHIRQ, + "inia100", shost); + if (error < 0) { + printk(KERN_WARNING "inia100: unable to get irq %d\n", + pdev->irq); + goto out_free_escb_array; + } + + pci_set_drvdata(pdev, shost); + + error = scsi_add_host(shost, &pdev->dev); + if (error) + goto out_free_irq; + + scsi_scan_host(shost); + return 0; + + out_free_irq: + free_irq(shost->irq, shost); + out_free_escb_array: + pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ESCB), + pHCB->HCS_virEscbArray, pHCB->HCS_physEscbArray); + out_free_scb_array: + pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ORC_SCB), + pHCB->HCS_virScbArray, pHCB->HCS_physScbArray); + out_host_put: + scsi_host_put(shost); + out_release_region: + release_region(port, 256); + out_disable_device: + pci_disable_device(pdev); + out: + return error; +} + +static void __devexit inia100_remove_one(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + ORC_HCS *pHCB = (ORC_HCS *)shost->hostdata; + + scsi_remove_host(shost); + + free_irq(shost->irq, shost); + pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ESCB), + pHCB->HCS_virEscbArray, pHCB->HCS_physEscbArray); + pci_free_consistent(pdev, ORC_MAXQUEUE * sizeof(ORC_SCB), + pHCB->HCS_virScbArray, pHCB->HCS_physScbArray); + release_region(shost->io_port, 256); + + scsi_host_put(shost); +} + +static struct pci_device_id inia100_pci_tbl[] = { + {PCI_VENDOR_ID_INIT, 0x1060, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} +}; +MODULE_DEVICE_TABLE(pci, inia100_pci_tbl); + +static struct pci_driver inia100_pci_driver = { + .name = "inia100", + .id_table = inia100_pci_tbl, + .probe = inia100_probe_one, + .remove = __devexit_p(inia100_remove_one), +}; + +static int __init inia100_init(void) +{ + return pci_module_init(&inia100_pci_driver); +} + +static void __exit inia100_exit(void) +{ + pci_unregister_driver(&inia100_pci_driver); +} + +MODULE_DESCRIPTION("Initio A100U2W SCSI driver"); +MODULE_AUTHOR("Initio Corporation"); +MODULE_LICENSE("Dual BSD/GPL"); + +module_init(inia100_init); +module_exit(inia100_exit); -- cgit