From 5c31b0c677531c2b8b4e29b3cfb923df663f39b7 Mon Sep 17 00:00:00 2001 From: Xiang Chen Date: Fri, 25 Jan 2019 22:22:31 +0800 Subject: scsi: hisi_sas: shutdown axi bus to avoid exception CQ returned When injecting 2 bit ECC error, it will cause fatal AXI interrupts. Before the recovery of SAS controller reset, the internal of SAS controller is in error. If CQ interrupts return at the time, actually it is exception CQ interrupt, and it may cause resource release in disorder. To avoid the exception situation, shutdown AXI bus after fatal AXI interrupt. In SAS controller reset, it will restart AXI bus. For later version of v3 hw, hardware will shutdown AXI bus for this situation, so just fix current ver of v3 hw. Signed-off-by: Xiang Chen Signed-off-by: John Garry Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/scsi/hisi_sas') diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 726ac4bd7dce..d5eabfc12509 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -1646,6 +1646,7 @@ static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p) u32 irq_value, irq_msk; struct hisi_hba *hisi_hba = p; struct device *dev = hisi_hba->dev; + struct pci_dev *pdev = hisi_hba->pci_dev; int i; irq_msk = hisi_sas_read32(hisi_hba, ENT_INT_SRC_MSK3); @@ -1677,6 +1678,17 @@ static irqreturn_t fatal_axi_int_v3_hw(int irq_no, void *p) error->msg, irq_value); queue_work(hisi_hba->wq, &hisi_hba->rst_work); } + + if (pdev->revision < 0x21) { + u32 reg_val; + + reg_val = hisi_sas_read32(hisi_hba, + AXI_MASTER_CFG_BASE + + AM_CTRL_GLOBAL); + reg_val |= AM_CTRL_SHUTDOWN_REQ_MSK; + hisi_sas_write32(hisi_hba, AXI_MASTER_CFG_BASE + + AM_CTRL_GLOBAL, reg_val); + } } if (irq_value & BIT(ENT_INT_SRC3_ITC_INT_OFF)) { -- cgit