From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/serial/21285.c | 541 ++++ drivers/serial/68328serial.c | 1614 ++++++++++ drivers/serial/68328serial.h | 194 ++ drivers/serial/68360serial.c | 3027 ++++++++++++++++++ drivers/serial/8250.c | 2632 ++++++++++++++++ drivers/serial/8250.h | 87 + drivers/serial/8250_acorn.c | 142 + drivers/serial/8250_acpi.c | 171 ++ drivers/serial/8250_early.c | 255 ++ drivers/serial/8250_gsc.c | 120 + drivers/serial/8250_hp300.c | 329 ++ drivers/serial/8250_pci.c | 2303 ++++++++++++++ drivers/serial/8250_pnp.c | 457 +++ drivers/serial/Kconfig | 846 ++++++ drivers/serial/Makefile | 54 + drivers/serial/amba-pl010.c | 840 +++++ drivers/serial/amba-pl011.c | 869 ++++++ drivers/serial/au1x00_uart.c | 1312 ++++++++ drivers/serial/bast_sio.c | 80 + drivers/serial/clps711x.c | 609 ++++ drivers/serial/cpm_uart/Makefile | 11 + drivers/serial/cpm_uart/cpm_uart.h | 89 + drivers/serial/cpm_uart/cpm_uart_core.c | 1177 +++++++ drivers/serial/cpm_uart/cpm_uart_cpm1.c | 290 ++ drivers/serial/cpm_uart/cpm_uart_cpm1.h | 45 + drivers/serial/cpm_uart/cpm_uart_cpm2.c | 328 ++ drivers/serial/cpm_uart/cpm_uart_cpm2.h | 45 + drivers/serial/crisv10.c | 5059 +++++++++++++++++++++++++++++++ drivers/serial/crisv10.h | 137 + drivers/serial/dz.c | 822 +++++ drivers/serial/dz.h | 118 + drivers/serial/icom.c | 1691 +++++++++++ drivers/serial/icom.h | 290 ++ drivers/serial/imx.c | 909 ++++++ drivers/serial/ioc4_serial.c | 2909 ++++++++++++++++++ drivers/serial/ip22zilog.c | 1271 ++++++++ drivers/serial/ip22zilog.h | 281 ++ drivers/serial/jsm/Makefile | 8 + drivers/serial/jsm/jsm.h | 437 +++ drivers/serial/jsm/jsm_driver.c | 404 +++ drivers/serial/jsm/jsm_neo.c | 1427 +++++++++ drivers/serial/jsm/jsm_tty.c | 1038 +++++++ drivers/serial/m32r_sio.c | 1218 ++++++++ drivers/serial/m32r_sio.h | 55 + drivers/serial/m32r_sio_reg.h | 153 + drivers/serial/mcfserial.c | 1883 ++++++++++++ drivers/serial/mcfserial.h | 75 + drivers/serial/mpc52xx_uart.c | 852 ++++++ drivers/serial/mpsc.c | 1832 +++++++++++ drivers/serial/mpsc.h | 289 ++ drivers/serial/mux.c | 539 ++++ drivers/serial/pmac_zilog.c | 2048 +++++++++++++ drivers/serial/pmac_zilog.h | 382 +++ drivers/serial/pxa.c | 877 ++++++ drivers/serial/s3c2410.c | 1831 +++++++++++ drivers/serial/sa1100.c | 952 ++++++ drivers/serial/serial_core.c | 2395 +++++++++++++++ drivers/serial/serial_cs.c | 747 +++++ drivers/serial/serial_lh7a40x.c | 711 +++++ drivers/serial/serial_txx9.c | 1171 +++++++ drivers/serial/sh-sci.c | 1692 +++++++++++ drivers/serial/sh-sci.h | 573 ++++ drivers/serial/sn_console.c | 1124 +++++++ drivers/serial/suncore.c | 218 ++ drivers/serial/suncore.h | 29 + drivers/serial/sunsab.c | 1171 +++++++ drivers/serial/sunsab.h | 321 ++ drivers/serial/sunsu.c | 1742 +++++++++++ drivers/serial/sunzilog.c | 1773 +++++++++++ drivers/serial/sunzilog.h | 272 ++ drivers/serial/uart00.c | 782 +++++ drivers/serial/v850e_uart.c | 549 ++++ drivers/serial/vr41xx_siu.c | 1100 +++++++ 73 files changed, 64624 insertions(+) create mode 100644 drivers/serial/21285.c create mode 100644 drivers/serial/68328serial.c create mode 100644 drivers/serial/68328serial.h create mode 100644 drivers/serial/68360serial.c create mode 100644 drivers/serial/8250.c create mode 100644 drivers/serial/8250.h create mode 100644 drivers/serial/8250_acorn.c create mode 100644 drivers/serial/8250_acpi.c create mode 100644 drivers/serial/8250_early.c create mode 100644 drivers/serial/8250_gsc.c create mode 100644 drivers/serial/8250_hp300.c create mode 100644 drivers/serial/8250_pci.c create mode 100644 drivers/serial/8250_pnp.c create mode 100644 drivers/serial/Kconfig create mode 100644 drivers/serial/Makefile create mode 100644 drivers/serial/amba-pl010.c create mode 100644 drivers/serial/amba-pl011.c create mode 100644 drivers/serial/au1x00_uart.c create mode 100644 drivers/serial/bast_sio.c create mode 100644 drivers/serial/clps711x.c create mode 100644 drivers/serial/cpm_uart/Makefile create mode 100644 drivers/serial/cpm_uart/cpm_uart.h create mode 100644 drivers/serial/cpm_uart/cpm_uart_core.c create mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm1.c create mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm1.h create mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm2.c create mode 100644 drivers/serial/cpm_uart/cpm_uart_cpm2.h create mode 100644 drivers/serial/crisv10.c create mode 100644 drivers/serial/crisv10.h create mode 100644 drivers/serial/dz.c create mode 100644 drivers/serial/dz.h create mode 100644 drivers/serial/icom.c create mode 100644 drivers/serial/icom.h create mode 100644 drivers/serial/imx.c create mode 100644 drivers/serial/ioc4_serial.c create mode 100644 drivers/serial/ip22zilog.c create mode 100644 drivers/serial/ip22zilog.h create mode 100644 drivers/serial/jsm/Makefile create mode 100644 drivers/serial/jsm/jsm.h create mode 100644 drivers/serial/jsm/jsm_driver.c create mode 100644 drivers/serial/jsm/jsm_neo.c create mode 100644 drivers/serial/jsm/jsm_tty.c create mode 100644 drivers/serial/m32r_sio.c create mode 100644 drivers/serial/m32r_sio.h create mode 100644 drivers/serial/m32r_sio_reg.h create mode 100644 drivers/serial/mcfserial.c create mode 100644 drivers/serial/mcfserial.h create mode 100644 drivers/serial/mpc52xx_uart.c create mode 100644 drivers/serial/mpsc.c create mode 100644 drivers/serial/mpsc.h create mode 100644 drivers/serial/mux.c create mode 100644 drivers/serial/pmac_zilog.c create mode 100644 drivers/serial/pmac_zilog.h create mode 100644 drivers/serial/pxa.c create mode 100644 drivers/serial/s3c2410.c create mode 100644 drivers/serial/sa1100.c create mode 100644 drivers/serial/serial_core.c create mode 100644 drivers/serial/serial_cs.c create mode 100644 drivers/serial/serial_lh7a40x.c create mode 100644 drivers/serial/serial_txx9.c create mode 100644 drivers/serial/sh-sci.c create mode 100644 drivers/serial/sh-sci.h create mode 100644 drivers/serial/sn_console.c create mode 100644 drivers/serial/suncore.c create mode 100644 drivers/serial/suncore.h create mode 100644 drivers/serial/sunsab.c create mode 100644 drivers/serial/sunsab.h create mode 100644 drivers/serial/sunsu.c create mode 100644 drivers/serial/sunzilog.c create mode 100644 drivers/serial/sunzilog.h create mode 100644 drivers/serial/uart00.c create mode 100644 drivers/serial/v850e_uart.c create mode 100644 drivers/serial/vr41xx_siu.c (limited to 'drivers/serial') diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c new file mode 100644 index 000000000000..f8504b0adebc --- /dev/null +++ b/drivers/serial/21285.c @@ -0,0 +1,541 @@ +/* + * linux/drivers/char/21285.c + * + * Driver for the serial port on the 21285 StrongArm-110 core logic chip. + * + * Based on drivers/char/serial.c + * + * $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $ + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define BAUD_BASE (mem_fclk_21285/64) + +#define SERIAL_21285_NAME "ttyFB" +#define SERIAL_21285_MAJOR 204 +#define SERIAL_21285_MINOR 4 + +#define RXSTAT_DUMMY_READ 0x80000000 +#define RXSTAT_FRAME (1 << 0) +#define RXSTAT_PARITY (1 << 1) +#define RXSTAT_OVERRUN (1 << 2) +#define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN) + +#define H_UBRLCR_BREAK (1 << 0) +#define H_UBRLCR_PARENB (1 << 1) +#define H_UBRLCR_PAREVN (1 << 2) +#define H_UBRLCR_STOPB (1 << 3) +#define H_UBRLCR_FIFO (1 << 4) + +static const char serial21285_name[] = "Footbridge UART"; + +#define tx_enabled(port) ((port)->unused[0]) +#define rx_enabled(port) ((port)->unused[1]) + +/* + * The documented expression for selecting the divisor is: + * BAUD_BASE / baud - 1 + * However, typically BAUD_BASE is not divisible by baud, so + * we want to select the divisor that gives us the minimum + * error. Therefore, we want: + * int(BAUD_BASE / baud - 0.5) -> + * int(BAUD_BASE / baud - (baud >> 1) / baud) -> + * int((BAUD_BASE - (baud >> 1)) / baud) + */ + +static void +serial21285_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + if (tx_enabled(port)) { + disable_irq(IRQ_CONTX); + tx_enabled(port) = 0; + } +} + +static void +serial21285_start_tx(struct uart_port *port, unsigned int tty_start) +{ + if (!tx_enabled(port)) { + enable_irq(IRQ_CONTX); + tx_enabled(port) = 1; + } +} + +static void serial21285_stop_rx(struct uart_port *port) +{ + if (rx_enabled(port)) { + disable_irq(IRQ_CONRX); + rx_enabled(port) = 0; + } +} + +static void serial21285_enable_ms(struct uart_port *port) +{ +} + +static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty = port->info->tty; + unsigned int status, ch, flag, rxs, max_count = 256; + + status = *CSR_UARTFLG; + while (!(status & 0x10) && max_count--) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + /* + * If this failed then we will throw away the + * bytes but must do so to clear interrupts + */ + } + + ch = *CSR_UARTDR; + flag = TTY_NORMAL; + port->icount.rx++; + + rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ; + if (rxs & RXSTAT_ANYERR) { + if (rxs & RXSTAT_PARITY) + port->icount.parity++; + else if (rxs & RXSTAT_FRAME) + port->icount.frame++; + if (rxs & RXSTAT_OVERRUN) + port->icount.overrun++; + + rxs &= port->read_status_mask; + + if (rxs & RXSTAT_PARITY) + flag = TTY_PARITY; + else if (rxs & RXSTAT_FRAME) + flag = TTY_FRAME; + } + + if ((rxs & port->ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if ((rxs & RXSTAT_OVERRUN) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + status = *CSR_UARTFLG; + } + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +static irqreturn_t serial21285_tx_chars(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = dev_id; + struct circ_buf *xmit = &port->info->xmit; + int count = 256; + + if (port->x_char) { + *CSR_UARTDR = port->x_char; + port->icount.tx++; + port->x_char = 0; + goto out; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + serial21285_stop_tx(port, 0); + goto out; + } + + do { + *CSR_UARTDR = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0 && !(*CSR_UARTFLG & 0x20)); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + serial21285_stop_tx(port, 0); + + out: + return IRQ_HANDLED; +} + +static unsigned int serial21285_tx_empty(struct uart_port *port) +{ + return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT; +} + +/* no modem control lines */ +static unsigned int serial21285_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static void serial21285_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int h_lcr; + + spin_lock_irqsave(&port->lock, flags); + h_lcr = *CSR_H_UBRLCR; + if (break_state) + h_lcr |= H_UBRLCR_BREAK; + else + h_lcr &= ~H_UBRLCR_BREAK; + *CSR_H_UBRLCR = h_lcr; + spin_unlock_irqrestore(&port->lock, flags); +} + +static int serial21285_startup(struct uart_port *port) +{ + int ret; + + tx_enabled(port) = 1; + rx_enabled(port) = 1; + + ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0, + serial21285_name, port); + if (ret == 0) { + ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0, + serial21285_name, port); + if (ret) + free_irq(IRQ_CONRX, port); + } + + return ret; +} + +static void serial21285_shutdown(struct uart_port *port) +{ + free_irq(IRQ_CONTX, port); + free_irq(IRQ_CONRX, port); +} + +static void +serial21285_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + unsigned long flags; + unsigned int baud, quot, h_lcr; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); + termios->c_cflag |= CLOCAL; + + /* + * We don't support BREAK character recognition. + */ + termios->c_iflag &= ~(IGNBRK | BRKINT); + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + h_lcr = 0x00; + break; + case CS6: + h_lcr = 0x20; + break; + case CS7: + h_lcr = 0x40; + break; + default: /* CS8 */ + h_lcr = 0x60; + break; + } + + if (termios->c_cflag & CSTOPB) + h_lcr |= H_UBRLCR_STOPB; + if (termios->c_cflag & PARENB) { + h_lcr |= H_UBRLCR_PARENB; + if (!(termios->c_cflag & PARODD)) + h_lcr |= H_UBRLCR_PAREVN; + } + + if (port->fifosize) + h_lcr |= H_UBRLCR_FIFO; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Which character status flags are we interested in? + */ + port->read_status_mask = RXSTAT_OVERRUN; + if (termios->c_iflag & INPCK) + port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; + + /* + * Which character status flags should we ignore? + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY; + if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RXSTAT_OVERRUN; + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RXSTAT_DUMMY_READ; + + quot -= 1; + + *CSR_UARTCON = 0; + *CSR_L_UBRLCR = quot & 0xff; + *CSR_M_UBRLCR = (quot >> 8) & 0x0f; + *CSR_H_UBRLCR = h_lcr; + *CSR_UARTCON = 1; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *serial21285_type(struct uart_port *port) +{ + return port->type == PORT_21285 ? "DC21285" : NULL; +} + +static void serial21285_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, 32); +} + +static int serial21285_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, 32, serial21285_name) + != NULL ? 0 : -EBUSY; +} + +static void serial21285_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0) + port->type = PORT_21285; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285) + ret = -EINVAL; + if (ser->irq != NO_IRQ) + ret = -EINVAL; + if (ser->baud_base != port->uartclk / 16) + ret = -EINVAL; + return ret; +} + +static struct uart_ops serial21285_ops = { + .tx_empty = serial21285_tx_empty, + .get_mctrl = serial21285_get_mctrl, + .set_mctrl = serial21285_set_mctrl, + .stop_tx = serial21285_stop_tx, + .start_tx = serial21285_start_tx, + .stop_rx = serial21285_stop_rx, + .enable_ms = serial21285_enable_ms, + .break_ctl = serial21285_break_ctl, + .startup = serial21285_startup, + .shutdown = serial21285_shutdown, + .set_termios = serial21285_set_termios, + .type = serial21285_type, + .release_port = serial21285_release_port, + .request_port = serial21285_request_port, + .config_port = serial21285_config_port, + .verify_port = serial21285_verify_port, +}; + +static struct uart_port serial21285_port = { + .mapbase = 0x42000160, + .iotype = SERIAL_IO_MEM, + .irq = NO_IRQ, + .fifosize = 16, + .ops = &serial21285_ops, + .flags = ASYNC_BOOT_AUTOCONF, +}; + +static void serial21285_setup_ports(void) +{ + serial21285_port.uartclk = mem_fclk_21285 / 4; +} + +#ifdef CONFIG_SERIAL_21285_CONSOLE + +static void +serial21285_console_write(struct console *co, const char *s, + unsigned int count) +{ + int i; + + for (i = 0; i < count; i++) { + while (*CSR_UARTFLG & 0x20) + barrier(); + *CSR_UARTDR = s[i]; + if (s[i] == '\n') { + while (*CSR_UARTFLG & 0x20) + barrier(); + *CSR_UARTDR = '\r'; + } + } +} + +static void __init +serial21285_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (*CSR_UARTCON == 1) { + unsigned int tmp; + + tmp = *CSR_H_UBRLCR; + switch (tmp & 0x60) { + case 0x00: + *bits = 5; + break; + case 0x20: + *bits = 6; + break; + case 0x40: + *bits = 7; + break; + default: + case 0x60: + *bits = 8; + break; + } + + if (tmp & H_UBRLCR_PARENB) { + *parity = 'o'; + if (tmp & H_UBRLCR_PAREVN) + *parity = 'e'; + } + + tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8); + + *baud = port->uartclk / (16 * (tmp + 1)); + } +} + +static int __init serial21285_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &serial21285_port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (machine_is_personal_server()) + baud = 57600; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + serial21285_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +extern struct uart_driver serial21285_reg; + +static struct console serial21285_console = +{ + .name = SERIAL_21285_NAME, + .write = serial21285_console_write, + .device = uart_console_device, + .setup = serial21285_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial21285_reg, +}; + +static int __init rs285_console_init(void) +{ + serial21285_setup_ports(); + register_console(&serial21285_console); + return 0; +} +console_initcall(rs285_console_init); + +#define SERIAL_21285_CONSOLE &serial21285_console +#else +#define SERIAL_21285_CONSOLE NULL +#endif + +static struct uart_driver serial21285_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyFB", + .dev_name = "ttyFB", + .devfs_name = "ttyFB", + .major = SERIAL_21285_MAJOR, + .minor = SERIAL_21285_MINOR, + .nr = 1, + .cons = SERIAL_21285_CONSOLE, +}; + +static int __init serial21285_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: 21285 driver $Revision: 1.37 $\n"); + + serial21285_setup_ports(); + + ret = uart_register_driver(&serial21285_reg); + if (ret == 0) + uart_add_one_port(&serial21285_reg, &serial21285_port); + + return ret; +} + +static void __exit serial21285_exit(void) +{ + uart_remove_one_port(&serial21285_reg, &serial21285_port); + uart_unregister_driver(&serial21285_reg); +} + +module_init(serial21285_init); +module_exit(serial21285_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver $Revision: 1.37 $"); +MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR); diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c new file mode 100644 index 000000000000..db92a0ceda79 --- /dev/null +++ b/drivers/serial/68328serial.c @@ -0,0 +1,1614 @@ +/* 68328serial.c: Serial port driver for 68328 microcontroller + * + * Copyright (C) 1995 David S. Miller + * Copyright (C) 1998 Kenneth Albanowski + * Copyright (C) 1998, 1999 D. Jeff Dionne + * Copyright (C) 1999 Vladimir Gurevich + * Copyright (C) 2002-2003 David McCullough + * Copyright (C) 2002 Greg Ungerer + * + * VZ Support/Fixes Evan Stawnyczy + * Multiple UART support Daniel Potts + * Power management support Daniel Potts + * VZ Second Serial Port enable Phil Wilshire + * 2.4/2.5 port David McCullough + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* (es) */ +/* note: perhaps we can murge these files, so that you can just + * define 1 of them, and they can sort that out for themselves + */ +#if defined(CONFIG_M68EZ328) +#include +#else +#if defined(CONFIG_M68VZ328) +#include +#else +#include +#endif /* CONFIG_M68VZ328 */ +#endif /* CONFIG_M68EZ328 */ + +#include "68328serial.h" + +/* Turn off usage of real serial interrupt code, to "support" Copilot */ +#ifdef CONFIG_XCOPILOT_BUGS +#undef USE_INTS +#else +#define USE_INTS +#endif + +static struct m68k_serial m68k_soft[NR_PORTS]; +struct m68k_serial *IRQ_ports[NR_IRQS]; + +static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS; + +/* multiple ports are contiguous in memory */ +m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR; + +struct tty_struct m68k_ttys; +struct m68k_serial *m68k_consinfo = 0; + +#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */ + +#ifdef CONFIG_CONSOLE +extern wait_queue_head_t keypress_wait; +#endif + +struct tty_driver *serial_driver; + +/* serial subtype definitions */ +#define SERIAL_TYPE_NORMAL 1 + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* Debugging... DEBUG_INTR is bad to use when one of the zs + * lines is your console ;( + */ +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW + +#define RS_ISR_PASS_LIMIT 256 + +#define _INLINE_ inline + +static void change_speed(struct m68k_serial *info); + +/* + * Setup for console. Argument comes from the boot command line. + */ + +#if defined(CONFIG_M68EZ328ADS) || defined(CONFIG_ALMA_ANS) || defined(CONFIG_DRAGONIXVZ) +#define CONSOLE_BAUD_RATE 115200 +#define DEFAULT_CBAUD B115200 +#else + /* (es) */ + /* note: this is messy, but it works, again, perhaps defined somewhere else?*/ + #ifdef CONFIG_M68VZ328 + #define CONSOLE_BAUD_RATE 19200 + #define DEFAULT_CBAUD B19200 + #endif + /* (/es) */ +#endif + +#ifndef CONSOLE_BAUD_RATE +#define CONSOLE_BAUD_RATE 9600 +#define DEFAULT_CBAUD B9600 +#endif + + +static int m68328_console_initted = 0; +static int m68328_console_baud = CONSOLE_BAUD_RATE; +static int m68328_console_cbaud = DEFAULT_CBAUD; + + +/* + * tmp_buf is used as a temporary buffer by serial_write. We need to + * lock it in case the memcpy_fromfs blocks while swapping in a page, + * and some other program tries to do a serial write at the same time. + * Since the lock will only come under contention when the system is + * swapping and available memory is low, it makes sense to share one + * buffer across all the serial ports, since it significantly saves + * memory if large numbers of serial ports are open. + */ +static unsigned char tmp_buf[SERIAL_XMIT_SIZE]; /* This is cheating */ +DECLARE_MUTEX(tmp_buf_sem); + +static inline int serial_paranoia_check(struct m68k_serial *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for serial struct %s in %s\n"; + static const char *badinfo = + "Warning: null m68k_serial for %s in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * This is used to figure out the divisor speeds and the timeouts + */ +static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 0 }; + +#define BAUD_TABLE_SIZE (sizeof(baud_table)/sizeof(baud_table[0])) + +/* Sets or clears DTR/RTS on the requested line */ +static inline void m68k_rtsdtr(struct m68k_serial *ss, int set) +{ + if (set) { + /* set the RTS/CTS line */ + } else { + /* clear it */ + } + return; +} + +/* Utility routines */ +static inline int get_baud(struct m68k_serial *ss) +{ + unsigned long result = 115200; + unsigned short int baud = uart_addr[ss->line].ubaud; + if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400; + result >>= GET_FIELD(baud, UBAUD_DIVIDE); + + return result; +} + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_stop(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + save_flags(flags); cli(); + uart->ustcnt &= ~USTCNT_TXEN; + restore_flags(flags); +} + +static void rs_put_char(char ch) +{ + int flags, loops = 0; + + save_flags(flags); cli(); + + while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) { + loops++; + udelay(5); + } + + UTX_TXDATA = ch; + udelay(5); + restore_flags(flags); +} + +static void rs_start(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_start")) + return; + + save_flags(flags); cli(); + if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) { +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt |= USTCNT_TXEN; +#endif + } + restore_flags(flags); +} + +/* Drop into either the boot monitor or kadb upon receiving a break + * from keyboard/console input. + */ +static void batten_down_hatches(void) +{ + /* Drop into the debugger */ +} + +static _INLINE_ void status_handle(struct m68k_serial *info, unsigned short status) +{ +#if 0 + if(status & DCD) { + if((info->tty->termios->c_cflag & CRTSCTS) && + ((info->curregs[3] & AUTO_ENAB)==0)) { + info->curregs[3] |= AUTO_ENAB; + info->pendregs[3] |= AUTO_ENAB; + write_zsreg(info->m68k_channel, 3, info->curregs[3]); + } + } else { + if((info->curregs[3] & AUTO_ENAB)) { + info->curregs[3] &= ~AUTO_ENAB; + info->pendregs[3] &= ~AUTO_ENAB; + write_zsreg(info->m68k_channel, 3, info->curregs[3]); + } + } +#endif + /* If this is console input and this is a + * 'break asserted' status change interrupt + * see if we can drop into the debugger + */ + if((status & URX_BREAK) && info->break_abort) + batten_down_hatches(); + return; +} + +static _INLINE_ void receive_chars(struct m68k_serial *info, struct pt_regs *regs, unsigned short rx) +{ + struct tty_struct *tty = info->tty; + m68328_uart *uart = &uart_addr[info->line]; + unsigned char ch; + + /* + * This do { } while() loop will get ALL chars out of Rx FIFO + */ +#ifndef CONFIG_XCOPILOT_BUGS + do { +#endif + ch = GET_FIELD(rx, URX_RXDATA); + + if(info->is_cons) { + if(URX_BREAK & rx) { /* whee, break received */ + status_handle(info, rx); + return; +#ifdef CONFIG_MAGIC_SYSRQ + } else if (ch == 0x10) { /* ^P */ + show_state(); + show_free_areas(); + show_buffers(); +/* show_net_buffers(); */ + return; + } else if (ch == 0x12) { /* ^R */ + machine_restart(NULL); + return; +#endif /* CONFIG_MAGIC_SYSRQ */ + } + /* It is a 'keyboard interrupt' ;-) */ +#ifdef CONFIG_CONSOLE + wake_up(&keypress_wait); +#endif + } + + if(!tty) + goto clear_and_exit; + + /* + * Make sure that we do not overflow the buffer + */ + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + schedule_work(&tty->flip.work); + return; + } + + if(rx & URX_PARITY_ERROR) { + *tty->flip.flag_buf_ptr++ = TTY_PARITY; + status_handle(info, rx); + } else if(rx & URX_OVRUN) { + *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; + status_handle(info, rx); + } else if(rx & URX_FRAME_ERROR) { + *tty->flip.flag_buf_ptr++ = TTY_FRAME; + status_handle(info, rx); + } else { + *tty->flip.flag_buf_ptr++ = 0; /* XXX */ + } + *tty->flip.char_buf_ptr++ = ch; + tty->flip.count++; + +#ifndef CONFIG_XCOPILOT_BUGS + } while((rx = uart->urx.w) & URX_DATA_READY); +#endif + + schedule_work(&tty->flip.work); + +clear_and_exit: + return; +} + +static _INLINE_ void transmit_chars(struct m68k_serial *info) +{ + m68328_uart *uart = &uart_addr[info->line]; + + if (info->x_char) { + /* Send next char */ + uart->utx.b.txdata = info->x_char; + info->x_char = 0; + goto clear_and_return; + } + + if((info->xmit_cnt <= 0) || info->tty->stopped) { + /* That's peculiar... TX ints off */ + uart->ustcnt &= ~USTCNT_TX_INTR_MASK; + goto clear_and_return; + } + + /* Send char */ + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + + if (info->xmit_cnt < WAKEUP_CHARS) + schedule_work(&info->tqueue); + + if(info->xmit_cnt <= 0) { + /* All done for now... TX ints off */ + uart->ustcnt &= ~USTCNT_TX_INTR_MASK; + goto clear_and_return; + } + +clear_and_return: + /* Clear interrupt (should be auto)*/ + return; +} + +/* + * This is the serial driver's generic interrupt routine + */ +irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct m68k_serial * info; + m68328_uart *uart; + unsigned short rx; + unsigned short tx; + + info = IRQ_ports[irq]; + if(!info) + return IRQ_NONE; + + uart = &uart_addr[info->line]; + rx = uart->urx.w; + +#ifdef USE_INTS + tx = uart->utx.w; + + if (rx & URX_DATA_READY) receive_chars(info, regs, rx); + if (tx & UTX_TX_AVAIL) transmit_chars(info); +#else + receive_chars(info, regs, rx); +#endif + return IRQ_HANDLED; +} + +static void do_softint(void *private) +{ + struct m68k_serial *info = (struct m68k_serial *) private; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; +#if 0 + if (clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) { + tty_wakeup(tty); + } +#endif +} + +/* + * This routine is called from the scheduler tqueue when the interrupt + * routine has signalled that a hangup has occurred. The path of + * hangup processing is: + * + * serial interrupt routine -> (scheduler tqueue) -> + * do_serial_hangup() -> tty->hangup() -> rs_hangup() + * + */ +static void do_serial_hangup(void *private) +{ + struct m68k_serial *info = (struct m68k_serial *) private; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + tty_hangup(tty); +} + + +static int startup(struct m68k_serial * info) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (info->flags & S_INITIALIZED) + return 0; + + if (!info->xmit_buf) { + info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL); + if (!info->xmit_buf) + return -ENOMEM; + } + + save_flags(flags); cli(); + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in change_speed()) + */ + + uart->ustcnt = USTCNT_UEN; + info->xmit_fifo_size = 1; + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN; + (void)uart->urx.w; + + /* + * Finally, enable sequencing and interrupts + */ +#ifdef USE_INTS + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | + USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK; +#endif + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + /* + * and set the speed of the serial port + */ + + change_speed(info); + + info->flags |= S_INITIALIZED; + restore_flags(flags); + return 0; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct m68k_serial * info) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + uart->ustcnt = 0; /* All off! */ + if (!(info->flags & S_INITIALIZED)) + return; + + save_flags(flags); cli(); /* Disable interrupts */ + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = 0; + } + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~S_INITIALIZED; + restore_flags(flags); +} + +struct { + int divisor, prescale; +} +#ifndef CONFIG_M68VZ328 + hw_baud_table[18] = { + {0,0}, /* 0 */ + {0,0}, /* 50 */ + {0,0}, /* 75 */ + {0,0}, /* 110 */ + {0,0}, /* 134 */ + {0,0}, /* 150 */ + {0,0}, /* 200 */ + {7,0x26}, /* 300 */ + {6,0x26}, /* 600 */ + {5,0x26}, /* 1200 */ + {0,0}, /* 1800 */ + {4,0x26}, /* 2400 */ + {3,0x26}, /* 4800 */ + {2,0x26}, /* 9600 */ + {1,0x26}, /* 19200 */ + {0,0x26}, /* 38400 */ + {1,0x38}, /* 57600 */ + {0,0x38}, /* 115200 */ +}; +#else + hw_baud_table[18] = { + {0,0}, /* 0 */ + {0,0}, /* 50 */ + {0,0}, /* 75 */ + {0,0}, /* 110 */ + {0,0}, /* 134 */ + {0,0}, /* 150 */ + {0,0}, /* 200 */ + {0,0}, /* 300 */ + {7,0x26}, /* 600 */ + {6,0x26}, /* 1200 */ + {0,0}, /* 1800 */ + {5,0x26}, /* 2400 */ + {4,0x26}, /* 4800 */ + {3,0x26}, /* 9600 */ + {2,0x26}, /* 19200 */ + {1,0x26}, /* 38400 */ + {0,0x26}, /* 57600 */ + {1,0x38}, /* 115200 */ +}; +#endif +/* rate = 1036800 / ((65 - prescale) * (1<line]; + unsigned short port; + unsigned short ustcnt; + unsigned cflag; + int i; + + if (!info->tty || !info->tty->termios) + return; + cflag = info->tty->termios->c_cflag; + if (!(port = info->port)) + return; + + ustcnt = uart->ustcnt; + uart->ustcnt = ustcnt & ~USTCNT_TXEN; + + i = cflag & CBAUD; + if (i & CBAUDEX) { + i = (i & ~CBAUDEX) + B38400; + } + + info->baud = baud_table[i]; + uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | + PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); + + ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); + + if ((cflag & CSIZE) == CS8) + ustcnt |= USTCNT_8_7; + + if (cflag & CSTOPB) + ustcnt |= USTCNT_STOP; + + if (cflag & PARENB) + ustcnt |= USTCNT_PARITYEN; + if (cflag & PARODD) + ustcnt |= USTCNT_ODD_EVEN; + +#ifdef CONFIG_SERIAL_68328_RTS_CTS + if (cflag & CRTSCTS) { + uart->utx.w &= ~ UTX_NOCTS; + } else { + uart->utx.w |= UTX_NOCTS; + } +#endif + + ustcnt |= USTCNT_TXEN; + + uart->ustcnt = ustcnt; + return; +} + +/* + * Fair output driver allows a process to speak. + */ +static void rs_fair_output(void) +{ + int left; /* Output no more than that */ + unsigned long flags; + struct m68k_serial *info = &m68k_soft[0]; + char c; + + if (info == 0) return; + if (info->xmit_buf == 0) return; + + save_flags(flags); cli(); + left = info->xmit_cnt; + while (left != 0) { + c = info->xmit_buf[info->xmit_tail]; + info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + restore_flags(flags); + + rs_put_char(c); + + save_flags(flags); cli(); + left = min(info->xmit_cnt, left-1); + } + + /* Last character is being transmitted now (hopefully). */ + udelay(5); + + restore_flags(flags); + return; +} + +/* + * m68k_console_print is registered for printk. + */ +void console_print_68328(const char *p) +{ + char c; + + while((c=*(p++)) != 0) { + if(c == '\n') + rs_put_char('\r'); + rs_put_char(c); + } + + /* Comment this if you want to have a strict interrupt-driven output */ + rs_fair_output(); + + return; +} + +static void rs_set_ldisc(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_set_ldisc")) + return; + + info->is_cons = (tty->termios->c_line == N_TTY); + + printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off"); +} + +static void rs_flush_chars(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) + return; +#ifndef USE_INTS + for(;;) { +#endif + + /* Enable transmitter */ + save_flags(flags); cli(); + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->xmit_buf) { + restore_flags(flags); + return; + } + +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt |= USTCNT_TXEN; +#endif + +#ifdef USE_INTS + if (uart->utx.w & UTX_TX_AVAIL) { +#else + if (1) { +#endif + /* Send char */ + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + +#ifndef USE_INTS + while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); + } +#endif + restore_flags(flags); +} + +extern void console_printn(const char * b, int count); + +static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, total = 0; + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_write")) + return 0; + + if (!tty || !info->xmit_buf) + return 0; + + save_flags(flags); + while (1) { + cli(); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) + break; + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt += c; + restore_flags(flags); + buf += c; + count -= c; + total += c; + } + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + /* Enable transmitter */ + cli(); +#ifndef USE_INTS + while(info->xmit_cnt) { +#endif + + uart->ustcnt |= USTCNT_TXEN; +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TX_INTR_MASK; +#else + while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); +#endif + if (uart->utx.w & UTX_TX_AVAIL) { + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + +#ifndef USE_INTS + } +#endif + restore_flags(flags); + } + restore_flags(flags); + return total; +} + +static int rs_write_room(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + int ret; + + if (serial_paranoia_check(info, tty->name, "rs_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) + return 0; + return info->xmit_cnt; +} + +static void rs_flush_buffer(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) + return; + cli(); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + sti(); + tty_wakeup(tty); +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_throttle(struct tty_struct * tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_throttle")) + return; + + if (I_IXOFF(tty)) + info->x_char = STOP_CHAR(tty); + + /* Turn off RTS line (do this atomic) */ +} + +static void rs_unthrottle(struct tty_struct * tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + info->x_char = START_CHAR(tty); + } + + /* Assert RTS line (do this atomic) */ +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int get_serial_info(struct m68k_serial * info, + struct serial_struct * retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = info->port; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + copy_to_user(retinfo,&tmp,sizeof(*retinfo)); + return 0; +} + +static int set_serial_info(struct m68k_serial * info, + struct serial_struct * new_info) +{ + struct serial_struct new_serial; + struct m68k_serial old_info; + int retval = 0; + + if (!new_info) + return -EFAULT; + copy_from_user(&new_serial,new_info,sizeof(new_serial)); + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.type != info->type) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~S_USR_MASK) != + (info->flags & ~S_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~S_USR_MASK) | + (new_serial.flags & S_USR_MASK)); + info->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if (info->count > 1) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud_base = new_serial.baud_base; + info->flags = ((info->flags & ~S_FLAGS) | + (new_serial.flags & S_FLAGS)); + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + +check_and_exit: + retval = startup(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct m68k_serial * info, unsigned int *value) +{ +#ifdef CONFIG_SERIAL_68328_RTS_CTS + m68328_uart *uart = &uart_addr[info->line]; +#endif + unsigned char status; + + cli(); +#ifdef CONFIG_SERIAL_68328_RTS_CTS + status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0; +#else + status = 0; +#endif + sti(); + put_user(status,value); + return 0; +} + +/* + * This routine sends a break character out the serial port. + */ +static void send_break( struct m68k_serial * info, int duration) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + if (!info->port) + return; + set_current_state(TASK_INTERRUPTIBLE); + save_flags(flags); + cli(); +#ifdef USE_INTS + uart->utx.w |= UTX_SEND_BREAK; + schedule_timeout(duration); + uart->utx.w &= ~UTX_SEND_BREAK; +#endif + restore_flags(flags); +} + +static int rs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + int error; + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + int retval; + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TCSBRK: /* SVID version: non-zero arg --> no break */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (!arg) + send_break(info, HZ/4); /* 1/4 second */ + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + send_break(info, arg ? arg*(HZ/10) : HZ/4); + return 0; + case TIOCGSOFTCAR: + error = put_user(C_CLOCAL(tty) ? 1 : 0, + (unsigned long *) arg); + if (error) + return error; + return 0; + case TIOCSSOFTCAR: + get_user(arg, (unsigned long *) arg); + tty->termios->c_cflag = + ((tty->termios->c_cflag & ~CLOCAL) | + (arg ? CLOCAL : 0)); + return 0; + case TIOCGSERIAL: + if (access_ok(VERIFY_WRITE, (void *) arg, + sizeof(struct serial_struct))) + return get_serial_info(info, + (struct serial_struct *) arg); + return -EFAULT; + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *) arg); + case TIOCSERGETLSR: /* Get line status register */ + if (access_ok(VERIFY_WRITE, (void *) arg, + sizeof(unsigned int)); + return get_lsr_info(info, (unsigned int *) arg); + return -EFAULT; + case TIOCSERGSTRUCT: + if (!access_ok(VERIFY_WRITE, (void *) arg, + sizeof(struct m68k_serial))) + return -EFAULT; + copy_to_user((struct m68k_serial *) arg, + info, sizeof(struct m68k_serial)); + return 0; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (tty->termios->c_cflag == old_termios->c_cflag) + return; + + change_speed(info); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_start(tty); + } + +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * S structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + return; + + save_flags(flags); cli(); + + if (tty_hung_up_p(filp)) { + restore_flags(flags); + return; + } + + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("rs_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk("rs_close: bad serial port count for ttyS%d: %d\n", + info->line, info->count); + info->count = 0; + } + if (info->count) { + restore_flags(flags); + return; + } + info->flags |= S_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != S_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + + uart->ustcnt &= ~USTCNT_RXEN; + uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK); + + shutdown(info); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->tty = 0; +#warning "This is not and has never been valid so fix it" +#if 0 + if (tty->ldisc.num != ldiscs[N_TTY].num) { + if (tty->ldisc.close) + (tty->ldisc.close)(tty); + tty->ldisc = ldiscs[N_TTY]; + tty->termios->c_line = N_TTY; + if (tty->ldisc.open) + (tty->ldisc.open)(tty); + } +#endif + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING); + wake_up_interruptible(&info->close_wait); + restore_flags(flags); +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void rs_hangup(struct tty_struct *tty) +{ + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_hangup")) + return; + + rs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~S_NORMAL_ACTIVE; + info->tty = 0; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct m68k_serial *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (info->flags & S_CLOSING) { + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & S_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= S_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); + + info->count--; + info->blocked_open++; + while (1) { + cli(); + m68k_rtsdtr(info, 1); + sti(); + current->state = TASK_INTERRUPTIBLE; + if (tty_hung_up_p(filp) || + !(info->flags & S_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & S_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & S_CLOSING) && do_clocal) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + schedule(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + info->count++; + info->blocked_open--; + + if (retval) + return retval; + info->flags |= S_NORMAL_ACTIVE; + return 0; +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its S structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +int rs_open(struct tty_struct *tty, struct file * filp) +{ + struct m68k_serial *info; + int retval, line; + + line = tty->index; + + if (line >= NR_PORTS || line < 0) /* we have exactly one */ + return -ENODEV; + + info = &m68k_soft[line]; + + if (serial_paranoia_check(info, tty->name, "rs_open")) + return -ENODEV; + + info->count++; + tty->driver_data = info; + info->tty = tty; + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) + return retval; + + return block_til_ready(tty, filp, info); +} + +/* Finally, routines used to initialize the serial driver. */ + +static void show_serial_version(void) +{ + printk("MC68328 serial driver version 1.00\n"); +} + +#ifdef CONFIG_PM +/* Serial Power management + * The console (currently fixed at line 0) is a special case for power + * management because the kernel is so chatty. The console will be + * explicitly disabled my our power manager as the last minute, so we won't + * mess with it here. + */ +static struct pm_dev *serial_pm[NR_PORTS]; + +static int serial_pm_callback(struct pm_dev *dev, pm_request_t request, void *data) +{ + struct m68k_serial *info = (struct m68k_serial *)dev->data; + + if(info == NULL) + return -1; + + /* special case for line 0 - pm restores it */ + if(info->line == 0) + return 0; + + switch (request) { + case PM_SUSPEND: + shutdown(info); + break; + + case PM_RESUME: + startup(info); + break; + } + return 0; +} + +void shutdown_console(void) +{ + struct m68k_serial *info = &m68k_soft[0]; + + /* HACK: wait a bit for any pending printk's to be dumped */ + { + int i = 10000; + while(i--); + } + + shutdown(info); +} + +void startup_console(void) +{ + struct m68k_serial *info = &m68k_soft[0]; + startup(info); +} +#endif + + +static struct tty_operations rs_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .set_ldisc = rs_set_ldisc, +}; + +/* rs_init inits the driver */ +static int __init +rs68328_init(void) +{ + int flags, i; + struct m68k_serial *info; + + serial_driver = alloc_tty_driver(NR_PORTS); + if (!serial_driver) + return -ENOMEM; + + show_serial_version(); + + /* Initialize the tty_driver structure */ + /* SPARC: Not all of this is exactly right for us. */ + + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &rs_ops); + + if (tty_register_driver(serial_driver)) { + put_tty_driver(serial_driver); + printk(KERN_ERR "Couldn't register serial driver\n"); + return -ENOMEM; + } + + save_flags(flags); cli(); + + for(i=0;imagic = SERIAL_MAGIC; + info->port = (int) &uart_addr[i]; + info->tty = 0; + info->irq = uart_irqs[i]; + info->custom_divisor = 16; + info->close_delay = 50; + info->closing_wait = 3000; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + INIT_WORK(&info->tqueue, do_softint, info); + INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->line = i; + info->is_cons = 1; /* Means shortcuts work */ + + printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line, + info->port, info->irq); + printk(" is a builtin MC68328 UART\n"); + + IRQ_ports[info->irq] = info; /* waste of space */ + +#ifdef CONFIG_M68VZ328 + if (i > 0 ) + PJSEL &= 0xCF; /* PSW enable second port output */ +#endif + + if (request_irq(uart_irqs[i], + rs_interrupt, + IRQ_FLG_STD, + "M68328_UART", NULL)) + panic("Unable to attach 68328 serial interrupt\n"); +#ifdef CONFIG_PM + serial_pm[i] = pm_register(PM_SYS_DEV, PM_SYS_COM, serial_pm_callback); + if (serial_pm[i]) + serial_pm[i]->data = info; +#endif + } + restore_flags(flags); + return 0; +} + + + +/* + * register_serial and unregister_serial allows for serial ports to be + * configured at run-time, to support PCMCIA modems. + */ +/* SPARC: Unused at this time, just here to make things link. */ +int register_serial(struct serial_struct *req) +{ + return -1; +} + +void unregister_serial(int line) +{ + return; +} + +module_init(rs68328_init); + + + +static void m68328_set_baud(void) +{ + unsigned short ustcnt; + int i; + + ustcnt = USTCNT; + USTCNT = ustcnt & ~USTCNT_TXEN; + +again: + for (i = 0; i < sizeof(baud_table) / sizeof(baud_table[0]); i++) + if (baud_table[i] == m68328_console_baud) + break; + if (i >= sizeof(baud_table) / sizeof(baud_table[0])) { + m68328_console_baud = 9600; + goto again; + } + + UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | + PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); + ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); + ustcnt |= USTCNT_8_7; + ustcnt |= USTCNT_TXEN; + USTCNT = ustcnt; + m68328_console_initted = 1; + return; +} + + +int m68328_console_setup(struct console *cp, char *arg) +{ + int i, n = CONSOLE_BAUD_RATE; + + if (!cp) + return(-1); + + if (arg) + n = simple_strtoul(arg,NULL,0); + + for (i = 0; i < BAUD_TABLE_SIZE; i++) + if (baud_table[i] == n) + break; + if (i < BAUD_TABLE_SIZE) { + m68328_console_baud = n; + m68328_console_cbaud = 0; + if (i > 15) { + m68328_console_cbaud |= CBAUDEX; + i -= 15; + } + m68328_console_cbaud |= i; + } + + m68328_set_baud(); /* make sure baud rate changes */ + return(0); +} + + +static struct tty_driver *m68328_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + + +void m68328_console_write (struct console *co, const char *str, + unsigned int count) +{ + if (!m68328_console_initted) + m68328_set_baud(); + while (count--) { + if (*str == '\n') + rs_put_char('\r'); + rs_put_char( *str++ ); + } +} + + +static struct console m68328_driver = { + .name = "ttyS", + .write = m68328_console_write, + .device = m68328_console_device, + .setup = m68328_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + + +static int __init m68328_console_init(void) +{ + register_console(&m68328_driver); + return 0; +} + +console_initcall(m68328_console_init); diff --git a/drivers/serial/68328serial.h b/drivers/serial/68328serial.h new file mode 100644 index 000000000000..978f8a609f3d --- /dev/null +++ b/drivers/serial/68328serial.h @@ -0,0 +1,194 @@ +/* 68328serial.h: Definitions for the mc68328 serial driver. + * + * Copyright (C) 1995 David S. Miller + * Copyright (C) 1998 Kenneth Albanowski + * Copyright (C) 1998, 1999 D. Jeff Dionne + * Copyright (C) 1999 Vladimir Gurevich + * + * VZ Support/Fixes Evan Stawnyczy + */ + +#ifndef _MC683XX_SERIAL_H +#define _MC683XX_SERIAL_H + +#include + +struct serial_struct { + int type; + int line; + int port; + int irq; + int flags; + int xmit_fifo_size; + int custom_divisor; + int baud_base; + unsigned short close_delay; + char reserved_char[2]; + int hub6; /* FIXME: We don't have AT&T Hub6 boards! */ + unsigned short closing_wait; /* time to wait before closing */ + unsigned short closing_wait2; /* no longer used... */ + int reserved[4]; +}; + +/* + * For the close wait times, 0 means wait forever for serial port to + * flush its output. 65535 means don't wait at all. + */ +#define S_CLOSING_WAIT_INF 0 +#define S_CLOSING_WAIT_NONE 65535 + +/* + * Definitions for S_struct (and serial_struct) flags field + */ +#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes + on the callout port */ +#define S_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */ +#define S_SAK 0x0004 /* Secure Attention Key (Orange book) */ +#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */ + +#define S_SPD_MASK 0x0030 +#define S_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */ + +#define S_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */ +#define S_SPD_CUST 0x0030 /* Use user-specified divisor */ + +#define S_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */ +#define S_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */ +#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */ +#define S_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */ +#define S_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */ + +#define S_FLAGS 0x0FFF /* Possible legal S flags */ +#define S_USR_MASK 0x0430 /* Legal flags that non-privileged + * users can set or reset */ + +/* Internal flags used only by kernel/chr_drv/serial.c */ +#define S_INITIALIZED 0x80000000 /* Serial port was initialized */ +#define S_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */ +#define S_NORMAL_ACTIVE 0x20000000 /* Normal device is active */ +#define S_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */ +#define S_CLOSING 0x08000000 /* Serial port is closing */ +#define S_CTS_FLOW 0x04000000 /* Do CTS flow control */ +#define S_CHECK_CD 0x02000000 /* i.e., CLOCAL */ + +/* Software state per channel */ + +#ifdef __KERNEL__ + +/* + * I believe this is the optimal setting that reduces the number of interrupts. + * At high speeds the output might become a little "bursted" (use USTCNT_TXHE + * if that bothers you), but in most cases it will not, since we try to + * transmit characters every time rs_interrupt is called. Thus, quite often + * you'll see that a receive interrupt occures before the transmit one. + * -- Vladimir Gurevich + */ +#define USTCNT_TX_INTR_MASK (USTCNT_TXEE) + +/* + * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special + * "Old data interrupt" which occures whenever the data stay in the FIFO + * longer than 30 bits time. This allows us to use FIFO without compromising + * latency. '328 does not have this feature and without the real 328-based + * board I would assume that RXRE is the safest setting. + * + * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of + * interrupts. RXFE (receive queue full) causes the system to lose data + * at least at 115200 baud + * + * If your board is busy doing other stuff, you might consider to use + * RXRE (data ready intrrupt) instead. + * + * The other option is to make these INTR masks run-time configurable, so + * that people can dynamically adapt them according to the current usage. + * -- Vladimir Gurevich + */ + +/* (es) */ +#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328) +#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN) +#elif defined(CONFIG_M68328) +#define USTCNT_RX_INTR_MASK (USTCNT_RXRE) +#else +#error Please, define the Rx interrupt events for your CPU +#endif +/* (/es) */ + +/* + * This is our internal structure for each serial port's state. + * + * Many fields are paralleled by the structure used by the serial_struct + * structure. + * + * For definitions of the flags field, see tty.h + */ + +struct m68k_serial { + char soft_carrier; /* Use soft carrier on this channel */ + char break_abort; /* Is serial console in, so process brk/abrt */ + char is_cons; /* Is this our console. */ + + /* We need to know the current clock divisor + * to read the bps rate the chip has currently + * loaded. + */ + unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */ + int baud; + int magic; + int baud_base; + int port; + int irq; + int flags; /* defined in tty.h */ + int type; /* UART type */ + struct tty_struct *tty; + int read_status_mask; + int ignore_status_mask; + int timeout; + int xmit_fifo_size; + int custom_divisor; + int x_char; /* xon/xoff character */ + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + unsigned long last_active; + int line; + int count; /* # of fd on device */ + int blocked_open; /* # of blocked opens */ + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; + struct work_struct tqueue; + struct work_struct tqueue_hangup; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; +}; + + +#define SERIAL_MAGIC 0x5301 + +/* + * The size of the serial xmit buffer is 1 page, or 4096 bytes + */ +#define SERIAL_XMIT_SIZE 4096 + +/* + * Events are used to schedule things to happen at timer-interrupt + * time, instead of at rs interrupt time. + */ +#define RS_EVENT_WRITE_WAKEUP 0 + +/* + * Define the number of ports supported and their irqs. + */ +#ifndef CONFIG_68328_SERIAL_UART2 +#define NR_PORTS 1 +#define UART_IRQ_DEFNS {UART_IRQ_NUM} +#else +#define NR_PORTS 2 +#define UART_IRQ_DEFNS {UART1_IRQ_NUM, UART2_IRQ_NUM} +#endif + +#endif /* __KERNEL__ */ +#endif /* !(_MC683XX_SERIAL_H) */ diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c new file mode 100644 index 000000000000..f148022b6b4e --- /dev/null +++ b/drivers/serial/68360serial.c @@ -0,0 +1,3027 @@ +/* + * UART driver for 68360 CPM SCC or SMC + * Copyright (c) 2000 D. Jeff Dionne , + * Copyright (c) 2000 Michael Leslie + * Copyright (c) 1997 Dan Malek + * + * I used the serial.c driver as the framework for this driver. + * Give credit to those guys. + * The original code was written for the MBX860 board. I tried to make + * it generic, but there may be some assumptions in the structures that + * have to be fixed later. + * To save porting time, I did not bother to change any object names + * that are not accessed outside of this file. + * It still needs lots of work........When it was easy, I included code + * to support the SCCs, but this has never been tested, nor is it complete. + * Only the SCCs support modem control, so that is not complete either. + * + * This module exports the following rs232 io functions: + * + * int rs_360_init(void); + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#ifdef CONFIG_KGDB +extern void breakpoint(void); +extern void set_debug_traps(void); +extern int kgdb_output_string (const char* s, unsigned int count); +#endif + + +/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */ +#include + +/* this defines the index into rs_table for the port to use + */ +#ifndef CONFIG_SERIAL_CONSOLE_PORT +#define CONFIG_SERIAL_CONSOLE_PORT 1 /* ie SMC2 - note USE_SMC2 must be defined */ +#endif +/* #endif */ + +#if 0 +/* SCC2 for console + */ +#undef CONFIG_SERIAL_CONSOLE_PORT +#define CONFIG_SERIAL_CONSOLE_PORT 2 +#endif + + +#define TX_WAKEUP ASYNC_SHARE_IRQ + +static char *serial_name = "CPM UART driver"; +static char *serial_version = "0.03"; + +static struct tty_driver *serial_driver; +int serial_console_setup(struct console *co, char *options); + +/* + * Serial driver configuration section. Here are the various options: + */ +#define SERIAL_PARANOIA_CHECK +#define CONFIG_SERIAL_NOPAUSE_IO +#define SERIAL_DO_RESTART + +/* Set of debugging defines */ + +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW +#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + +#define _INLINE_ inline + +#define DBG_CNT(s) + +/* We overload some of the items in the data structure to meet our + * needs. For example, the port address is the CPM parameter ram + * offset for the SCC or SMC. The maximum number of ports is 4 SCCs and + * 2 SMCs. The "hub6" field is used to indicate the channel number, with + * a flag indicating SCC or SMC, and the number is used as an index into + * the CPM parameter area for this device. + * The "type" field is currently set to 0, for PORT_UNKNOWN. It is + * not currently used. I should probably use it to indicate the port + * type of SMC or SCC. + * The SMCs do not support any modem control signals. + */ +#define smc_scc_num hub6 +#define NUM_IS_SCC ((int)0x00010000) +#define PORT_NUM(P) ((P) & 0x0000ffff) + + +#if defined (CONFIG_UCQUICC) + +volatile extern void *_periph_base; +/* sipex transceiver + * mode bits for are on pins + * + * SCC2 d16..19 + * SCC3 d20..23 + * SCC4 d24..27 + */ +#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1))) + +static uint sipex_mode_bits = 0x00000000; + +#endif + +/* There is no `serial_state' defined back here in 2.0. + * Try to get by with serial_struct + */ +/* #define serial_state serial_struct */ + +/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few + * extras: */ + +#if 0 +struct async_icount_24 { + __u32 cts, dsr, rng, dcd, tx, rx; + __u32 frame, parity, overrun, brk; + __u32 buf_overrun; +} icount; +#endif + +#if 0 + +struct serial_state { + int magic; + int baud_base; + unsigned long port; + int irq; + int flags; + int hub6; + int type; + int line; + int revision; /* Chip revision (950) */ + int xmit_fifo_size; + int custom_divisor; + int count; + u8 *iomem_base; + u16 iomem_reg_shift; + unsigned short close_delay; + unsigned short closing_wait; /* time to wait before closing */ + struct async_icount_24 icount; + int io_type; + struct async_struct *info; +}; +#endif + +#define SSTATE_MAGIC 0x5302 + + + +/* SMC2 is sometimes used for low performance TDM interfaces. Define + * this as 1 if you want SMC2 as a serial port UART managed by this driver. + * Define this as 0 if you wish to use SMC2 for something else. + */ +#define USE_SMC2 1 + +#if 0 +/* Define SCC to ttySx mapping. */ +#define SCC_NUM_BASE (USE_SMC2 + 1) /* SCC base tty "number" */ + +/* Define which SCC is the first one to use for a serial port. These + * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used + * for Ethernet, and the first available SCC for serial UART is SCC2. + * NOTE: IF YOU CHANGE THIS, you have to change the PROFF_xxx and + * interrupt vectors in the table below to match. + */ +#define SCC_IDX_BASE 1 /* table index */ +#endif + + +/* Processors other than the 860 only get SMCs configured by default. + * Either they don't have SCCs or they are allocated somewhere else. + * Of course, there are now 860s without some SCCs, so we will need to + * address that someday. + * The Embedded Planet Multimedia I/O cards use TDM interfaces to the + * stereo codec parts, and we use SMC2 to help support that. + */ +static struct serial_state rs_table[] = { +/* type line PORT IRQ FLAGS smc_scc_num (F.K.A. hub6) */ + { 0, 0, PRSLOT_SMC1, CPMVEC_SMC1, 0, 0 } /* SMC1 ttyS0 */ +#if USE_SMC2 + ,{ 0, 0, PRSLOT_SMC2, CPMVEC_SMC2, 0, 1 } /* SMC2 ttyS1 */ +#endif + +#if defined(CONFIG_SERIAL_68360_SCC) + ,{ 0, 0, PRSLOT_SCC2, CPMVEC_SCC2, 0, (NUM_IS_SCC | 1) } /* SCC2 ttyS2 */ + ,{ 0, 0, PRSLOT_SCC3, CPMVEC_SCC3, 0, (NUM_IS_SCC | 2) } /* SCC3 ttyS3 */ + ,{ 0, 0, PRSLOT_SCC4, CPMVEC_SCC4, 0, (NUM_IS_SCC | 3) } /* SCC4 ttyS4 */ +#endif +}; + +#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state)) + +/* The number of buffer descriptors and their sizes. + */ +#define RX_NUM_FIFO 4 +#define RX_BUF_SIZE 32 +#define TX_NUM_FIFO 4 +#define TX_BUF_SIZE 32 + +#define CONSOLE_NUM_FIFO 2 +#define CONSOLE_BUF_SIZE 4 + +char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE]; + +/* The async_struct in serial.h does not really give us what we + * need, so define our own here. + */ +typedef struct serial_info { + int magic; + int flags; + + struct serial_state *state; + /* struct serial_struct *state; */ + /* struct async_struct *state; */ + + struct tty_struct *tty; + int read_status_mask; + int ignore_status_mask; + int timeout; + int line; + int x_char; /* xon/xoff character */ + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + unsigned long last_active; + int blocked_open; /* # of blocked opens */ + struct work_struct tqueue; + struct work_struct tqueue_hangup; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + + +/* CPM Buffer Descriptor pointers. + */ + QUICC_BD *rx_bd_base; + QUICC_BD *rx_cur; + QUICC_BD *tx_bd_base; + QUICC_BD *tx_cur; +} ser_info_t; + + +/* since kmalloc_init() does not get called until much after this initialization: */ +static ser_info_t quicc_ser_info[NR_PORTS]; +static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE]; +static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE]; + +static void change_speed(ser_info_t *info); +static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout); + +static inline int serial_paranoia_check(ser_info_t *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for serial struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null async_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * This is used to figure out the divisor speeds and the timeouts, + * indexed by the termio value. The generic CPM functions are responsible + * for setting and assigning baud rate generators for us. + */ +static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 }; + +/* This sucks. There is a better way: */ +#if defined(CONFIG_CONSOLE_9600) + #define CONSOLE_BAUDRATE 9600 +#elif defined(CONFIG_CONSOLE_19200) + #define CONSOLE_BAUDRATE 19200 +#elif defined(CONFIG_CONSOLE_115200) + #define CONSOLE_BAUDRATE 115200 +#else + #warning "console baud rate undefined" + #define CONSOLE_BAUDRATE 9600 +#endif + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_360_stop(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + int idx; + unsigned long flags; + volatile struct scc_regs *sccp; + volatile struct smc_regs *smcp; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + local_irq_save(flags); + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_sccm &= ~UART_SCCM_TX; + } else { + /* smcp = &cpmp->cp_smc[idx]; */ + smcp = &pquicc->smc_regs[idx]; + smcp->smc_smcm &= ~SMCM_TX; + } + local_irq_restore(flags); +} + + +static void rs_360_start(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + int idx; + unsigned long flags; + volatile struct scc_regs *sccp; + volatile struct smc_regs *smcp; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + local_irq_save(flags); + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_sccm |= UART_SCCM_TX; + } else { + smcp = &pquicc->smc_regs[idx]; + smcp->smc_smcm |= SMCM_TX; + } + local_irq_restore(flags); +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * rs_interrupt(). They were separated out for readability's sake. + * + * Note: rs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * rs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +static _INLINE_ void receive_chars(ser_info_t *info) +{ + struct tty_struct *tty = info->tty; + unsigned char ch, *cp; + /*int ignored = 0;*/ + int i; + ushort status; + struct async_icount *icount; + /* struct async_icount_24 *icount; */ + volatile QUICC_BD *bdp; + + icount = &info->state->icount; + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = info->rx_cur; + for (;;) { + if (bdp->status & BD_SC_EMPTY) /* If this one is empty */ + break; /* we are all done */ + + /* The read status mask tell us what we should do with + * incoming characters, especially if errors occur. + * One special case is the use of BD_SC_EMPTY. If + * this is not set, we are supposed to be ignoring + * inputs. In this case, just mark the buffer empty and + * continue. + */ + if (!(info->read_status_mask & BD_SC_EMPTY)) { + bdp->status |= BD_SC_EMPTY; + bdp->status &= + ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); + + if (bdp->status & BD_SC_WRAP) + bdp = info->rx_bd_base; + else + bdp++; + continue; + } + + /* Get the number of characters and the buffer pointer. + */ + i = bdp->length; + /* cp = (unsigned char *)__va(bdp->buf); */ + cp = (char *)bdp->buf; + status = bdp->status; + + /* Check to see if there is room in the tty buffer for + * the characters in our BD buffer. If not, we exit + * now, leaving the BD with the characters. We'll pick + * them up again on the next receive interrupt (which could + * be a timeout). + */ + if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) + break; + + while (i-- > 0) { + ch = *cp++; + *tty->flip.char_buf_ptr = ch; + icount->rx++; + +#ifdef SERIAL_DEBUG_INTR + printk("DR%02x:%02x...", ch, status); +#endif + *tty->flip.flag_buf_ptr = 0; + if (status & (BD_SC_BR | BD_SC_FR | + BD_SC_PR | BD_SC_OV)) { + /* + * For statistics only + */ + if (status & BD_SC_BR) + icount->brk++; + else if (status & BD_SC_PR) + icount->parity++; + else if (status & BD_SC_FR) + icount->frame++; + if (status & BD_SC_OV) + icount->overrun++; + + /* + * Now check to see if character should be + * ignored, and mask off conditions which + * should be ignored. + if (status & info->ignore_status_mask) { + if (++ignored > 100) + break; + continue; + } + */ + status &= info->read_status_mask; + + if (status & (BD_SC_BR)) { +#ifdef SERIAL_DEBUG_INTR + printk("handling break...."); +#endif + *tty->flip.flag_buf_ptr = TTY_BREAK; + if (info->flags & ASYNC_SAK) + do_SAK(tty); + } else if (status & BD_SC_PR) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (status & BD_SC_FR) + *tty->flip.flag_buf_ptr = TTY_FRAME; + if (status & BD_SC_OV) { + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + if (tty->flip.count < TTY_FLIPBUF_SIZE) { + tty->flip.count++; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + *tty->flip.flag_buf_ptr = + TTY_OVERRUN; + } + } + } + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + break; + + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + + /* This BD is ready to be used again. Clear status. + * Get next BD. + */ + bdp->status |= BD_SC_EMPTY; + bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); + + if (bdp->status & BD_SC_WRAP) + bdp = info->rx_bd_base; + else + bdp++; + } + + info->rx_cur = (QUICC_BD *)bdp; + + schedule_work(&tty->flip.work); +} + +static _INLINE_ void receive_break(ser_info_t *info) +{ + struct tty_struct *tty = info->tty; + + info->state->icount.brk++; + /* Check to see if there is room in the tty buffer for + * the break. If not, we exit now, losing the break. FIXME + */ + if ((tty->flip.count + 1) >= TTY_FLIPBUF_SIZE) + return; + *(tty->flip.flag_buf_ptr++) = TTY_BREAK; + *(tty->flip.char_buf_ptr++) = 0; + tty->flip.count++; + + schedule_work(&tty->flip.work); +} + +static _INLINE_ void transmit_chars(ser_info_t *info) +{ + + if ((info->flags & TX_WAKEUP) || + (info->tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) { + schedule_work(&info->tqueue); + } + +#ifdef SERIAL_DEBUG_INTR + printk("THRE..."); +#endif +} + +#ifdef notdef + /* I need to do this for the SCCs, so it is left as a reminder. + */ +static _INLINE_ void check_modem_status(struct async_struct *info) +{ + int status; + /* struct async_icount *icount; */ + struct async_icount_24 *icount; + + status = serial_in(info, UART_MSR); + + if (status & UART_MSR_ANY_DELTA) { + icount = &info->state->icount; + /* update input line counters */ + if (status & UART_MSR_TERI) + icount->rng++; + if (status & UART_MSR_DDSR) + icount->dsr++; + if (status & UART_MSR_DDCD) { + icount->dcd++; +#ifdef CONFIG_HARD_PPS + if ((info->flags & ASYNC_HARDPPS_CD) && + (status & UART_MSR_DCD)) + hardpps(); +#endif + } + if (status & UART_MSR_DCTS) + icount->cts++; + wake_up_interruptible(&info->delta_msr_wait); + } + + if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { +#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) + printk("ttys%d CD now %s...", info->line, + (status & UART_MSR_DCD) ? "on" : "off"); +#endif + if (status & UART_MSR_DCD) + wake_up_interruptible(&info->open_wait); + else { +#ifdef SERIAL_DEBUG_OPEN + printk("scheduling hangup..."); +#endif + queue_task(&info->tqueue_hangup, + &tq_scheduler); + } + } + if (info->flags & ASYNC_CTS_FLOW) { + if (info->tty->hw_stopped) { + if (status & UART_MSR_CTS) { +#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) + printk("CTS tx start..."); +#endif + info->tty->hw_stopped = 0; + info->IER |= UART_IER_THRI; + serial_out(info, UART_IER, info->IER); + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + return; + } + } else { + if (!(status & UART_MSR_CTS)) { +#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW)) + printk("CTS tx stop..."); +#endif + info->tty->hw_stopped = 1; + info->IER &= ~UART_IER_THRI; + serial_out(info, UART_IER, info->IER); + } + } + } +} +#endif + +/* + * This is the serial driver's interrupt routine for a single port + */ +/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */ +static void rs_360_interrupt(int vec, void *dev_id, struct pt_regs *fp) +{ + u_char events; + int idx; + ser_info_t *info; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + info = (ser_info_t *)dev_id; + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + events = sccp->scc_scce; + if (events & SCCM_RX) + receive_chars(info); + if (events & SCCM_TX) + transmit_chars(info); + sccp->scc_scce = events; + } else { + smcp = &pquicc->smc_regs[idx]; + events = smcp->smc_smce; + if (events & SMCM_BRKE) + receive_break(info); + if (events & SMCM_RX) + receive_chars(info); + if (events & SMCM_TX) + transmit_chars(info); + smcp->smc_smce = events; + } + +#ifdef SERIAL_DEBUG_INTR + printk("rs_interrupt_single(%d, %x)...", + info->state->smc_scc_num, events); +#endif +#ifdef modem_control + check_modem_status(info); +#endif + info->last_active = jiffies; +#ifdef SERIAL_DEBUG_INTR + printk("end.\n"); +#endif +} + + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + + +static void do_softint(void *private_) +{ + ser_info_t *info = (ser_info_t *) private_; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) + tty_wakeup(tty); +} + + +/* + * This routine is called from the scheduler tqueue when the interrupt + * routine has signalled that a hangup has occurred. The path of + * hangup processing is: + * + * serial interrupt routine -> (scheduler tqueue) -> + * do_serial_hangup() -> tty->hangup() -> rs_hangup() + * + */ +static void do_serial_hangup(void *private_) +{ + struct async_struct *info = (struct async_struct *) private_; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + tty_hangup(tty); +} + + +static int startup(ser_info_t *info) +{ + unsigned long flags; + int retval=0; + int idx; + /*struct serial_state *state = info->state;*/ + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + volatile struct smc_uart_pram *up; + volatile struct uart_pram *scup; + + + local_irq_save(flags); + + if (info->flags & ASYNC_INITIALIZED) { + goto errout; + } + +#ifdef maybe + if (!state->port || !state->type) { + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + goto errout; + } +#endif + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttys%d (irq %d)...", info->line, state->irq); +#endif + + +#ifdef modem_control + info->MCR = 0; + if (info->tty->termios->c_cflag & CBAUD) + info->MCR = UART_MCR_DTR | UART_MCR_RTS; +#endif + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + + /* + * and set the speed of the serial port + */ + change_speed(info); + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + scup = &pquicc->pram[info->state->port].scc.pscc.u; + + scup->mrblr = RX_BUF_SIZE; + scup->max_idl = RX_BUF_SIZE; + + sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX); + sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + } else { + smcp = &pquicc->smc_regs[idx]; + + /* Enable interrupts and I/O. + */ + smcp->smc_smcm |= (SMCM_RX | SMCM_TX); + smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN); + + /* We can tune the buffer length and idle characters + * to take advantage of the entire incoming buffer size. + * If mrblr is something other than 1, maxidl has to be + * non-zero or we never get an interrupt. The maxidl + * is the number of character times we wait after reception + * of the last character before we decide no more characters + * are coming. + */ + /* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */ + /* holy unionized structures, Batman: */ + up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; + + up->mrblr = RX_BUF_SIZE; + up->max_idl = RX_BUF_SIZE; + + up->brkcr = 1; /* number of break chars */ + } + + info->flags |= ASYNC_INITIALIZED; + local_irq_restore(flags); + return 0; + +errout: + local_irq_restore(flags); + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(ser_info_t *info) +{ + unsigned long flags; + struct serial_state *state; + int idx; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + + state = info->state; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d (irq %d)....", info->line, + state->irq); +#endif + + local_irq_save(flags); + + idx = PORT_NUM(state->smc_scc_num); + if (state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#ifdef CONFIG_SERIAL_CONSOLE + /* We can't disable the transmitter if this is the + * system console. + */ + if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) +#endif + sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); + } else { + smcp = &pquicc->smc_regs[idx]; + + /* Disable interrupts and I/O. + */ + smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); +#ifdef CONFIG_SERIAL_CONSOLE + /* We can't disable the transmitter if this is the + * system console. + */ + if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT) +#endif + smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + } + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + local_irq_restore(flags); +} + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void change_speed(ser_info_t *info) +{ + int baud_rate; + unsigned cflag, cval, scval, prev_mode; + int i, bits, sbits, idx; + unsigned long flags; + struct serial_state *state; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + if (!info->tty || !info->tty->termios) + return; + cflag = info->tty->termios->c_cflag; + + state = info->state; + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + cval = 0; + scval = 0; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: bits = 5; break; + case CS6: bits = 6; break; + case CS7: bits = 7; break; + case CS8: bits = 8; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: bits = 8; break; + } + sbits = bits - 5; + + if (cflag & CSTOPB) { + cval |= SMCMR_SL; /* Two stops */ + scval |= SCU_PMSR_SL; + bits++; + } + if (cflag & PARENB) { + cval |= SMCMR_PEN; + scval |= SCU_PMSR_PEN; + bits++; + } + if (!(cflag & PARODD)) { + cval |= SMCMR_PM_EVEN; + scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP); + } + + /* Determine divisor based on baud rate */ + i = cflag & CBAUD; + if (i >= (sizeof(baud_table)/sizeof(int))) + baud_rate = 9600; + else + baud_rate = baud_table[i]; + + info->timeout = (TX_BUF_SIZE*HZ*bits); + info->timeout += HZ/50; /* Add .02 seconds of slop */ + +#ifdef modem_control + /* CTS flow control flag and modem status interrupts */ + info->IER &= ~UART_IER_MSI; + if (info->flags & ASYNC_HARDPPS_CD) + info->IER |= UART_IER_MSI; + if (cflag & CRTSCTS) { + info->flags |= ASYNC_CTS_FLOW; + info->IER |= UART_IER_MSI; + } else + info->flags &= ~ASYNC_CTS_FLOW; + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else { + info->flags |= ASYNC_CHECK_CD; + info->IER |= UART_IER_MSI; + } + serial_out(info, UART_IER, info->IER); +#endif + + /* + * Set up parity check flag + */ +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + + info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); + if (I_INPCK(info->tty)) + info->read_status_mask |= BD_SC_FR | BD_SC_PR; + if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + info->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + info->ignore_status_mask = 0; + if (I_IGNPAR(info->tty)) + info->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (I_IGNBRK(info->tty)) { + info->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->tty)) + info->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + info->read_status_mask &= ~BD_SC_EMPTY; + local_irq_save(flags); + + /* Start bit has not been added (so don't, because we would just + * subtract it later), and we need to add one for the number of + * stops bits (there is always at least one). + */ + bits++; + idx = PORT_NUM(state->smc_scc_num); + if (state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_psmr = (sbits << 12) | scval; + } else { + smcp = &pquicc->smc_regs[idx]; + + /* Set the mode register. We want to keep a copy of the + * enables, because we want to put them back if they were + * present. + */ + prev_mode = smcp->smc_smcmr; + smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART; + smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN)); + } + + m360_cpm_setbrg((state - rs_table), baud_rate); + + local_irq_restore(flags); +} + +static void rs_360_put_char(struct tty_struct *tty, unsigned char ch) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + volatile QUICC_BD *bdp; + + if (serial_paranoia_check(info, tty->name, "rs_put_char")) + return; + + if (!tty) + return; + + bdp = info->tx_cur; + while (bdp->status & BD_SC_READY); + + /* *((char *)__va(bdp->buf)) = ch; */ + *((char *)bdp->buf) = ch; + bdp->length = 1; + bdp->status |= BD_SC_READY; + + /* Get next BD. + */ + if (bdp->status & BD_SC_WRAP) + bdp = info->tx_bd_base; + else + bdp++; + + info->tx_cur = (QUICC_BD *)bdp; + +} + +static int rs_360_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + ser_info_t *info = (ser_info_t *)tty->driver_data; + volatile QUICC_BD *bdp; + +#ifdef CONFIG_KGDB + /* Try to let stub handle output. Returns true if it did. */ + if (kgdb_output_string(buf, count)) + return ret; +#endif + + if (serial_paranoia_check(info, tty->name, "rs_write")) + return 0; + + if (!tty) + return 0; + + bdp = info->tx_cur; + + while (1) { + c = min(count, TX_BUF_SIZE); + + if (c <= 0) + break; + + if (bdp->status & BD_SC_READY) { + info->flags |= TX_WAKEUP; + break; + } + + /* memcpy(__va(bdp->buf), buf, c); */ + memcpy((void *)bdp->buf, buf, c); + + bdp->length = c; + bdp->status |= BD_SC_READY; + + buf += c; + count -= c; + ret += c; + + /* Get next BD. + */ + if (bdp->status & BD_SC_WRAP) + bdp = info->tx_bd_base; + else + bdp++; + info->tx_cur = (QUICC_BD *)bdp; + } + return ret; +} + +static int rs_360_write_room(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + int ret; + + if (serial_paranoia_check(info, tty->name, "rs_write_room")) + return 0; + + if ((info->tx_cur->status & BD_SC_READY) == 0) { + info->flags &= ~TX_WAKEUP; + ret = TX_BUF_SIZE; + } + else { + info->flags |= TX_WAKEUP; + ret = 0; + } + return ret; +} + +/* I could track this with transmit counters....maybe later. +*/ +static int rs_360_chars_in_buffer(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) + return 0; + return 0; +} + +static void rs_360_flush_buffer(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) + return; + + /* There is nothing to "flush", whatever we gave the CPM + * is on its way out. + */ + tty_wakeup(tty); + info->flags &= ~TX_WAKEUP; +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void rs_360_send_xchar(struct tty_struct *tty, char ch) +{ + volatile QUICC_BD *bdp; + + ser_info_t *info = (ser_info_t *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_send_char")) + return; + + bdp = info->tx_cur; + while (bdp->status & BD_SC_READY); + + /* *((char *)__va(bdp->buf)) = ch; */ + *((char *)bdp->buf) = ch; + bdp->length = 1; + bdp->status |= BD_SC_READY; + + /* Get next BD. + */ + if (bdp->status & BD_SC_WRAP) + bdp = info->tx_bd_base; + else + bdp++; + + info->tx_cur = (QUICC_BD *)bdp; +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_360_throttle(struct tty_struct * tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", _tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_throttle")) + return; + + if (I_IXOFF(tty)) + rs_360_send_xchar(tty, STOP_CHAR(tty)); + +#ifdef modem_control + if (tty->termios->c_cflag & CRTSCTS) + info->MCR &= ~UART_MCR_RTS; + + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); +#endif +} + +static void rs_360_unthrottle(struct tty_struct * tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("unthrottle %s: %d....\n", _tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + rs_360_send_xchar(tty, START_CHAR(tty)); + } +#ifdef modem_control + if (tty->termios->c_cflag & CRTSCTS) + info->MCR |= UART_MCR_RTS; + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); +#endif +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +#ifdef maybe +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct async_struct * info, unsigned int *value) +{ + unsigned char status; + unsigned int result; + + local_irq_disable(); + status = serial_in(info, UART_LSR); + local_irq_enable(); + result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); + return put_user(result,value); +} +#endif + +static int rs_360_tiocmget(struct tty_struct *tty, struct file *file) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + unsigned int result = 0; +#ifdef modem_control + unsigned char control, status; + + if (serial_paranoia_check(info, tty->name, __FUNCTION__)) + return -ENODEV; + + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + control = info->MCR; + local_irq_disable(); + status = serial_in(info, UART_MSR); + local_irq_enable(); + result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) + | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) +#ifdef TIOCM_OUT1 + | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0) + | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0) +#endif + | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) + | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) + | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) + | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); +#endif + return result; +} + +static int rs_360_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ +#ifdef modem_control + ser_info_t *info = (ser_info_t *)tty->driver_data; + unsigned int arg; + + if (serial_paranoia_check(info, tty->name, __FUNCTION__)) + return -ENODEV; + + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + if (set & TIOCM_RTS) + info->mcr |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->mcr |= UART_MCR_DTR; + if (clear & TIOCM_RTS) + info->MCR &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~UART_MCR_DTR; + +#ifdef TIOCM_OUT1 + if (set & TIOCM_OUT1) + info->MCR |= UART_MCR_OUT1; + if (set & TIOCM_OUT2) + info->MCR |= UART_MCR_OUT2; + if (clear & TIOCM_OUT1) + info->MCR &= ~UART_MCR_OUT1; + if (clear & TIOCM_OUT2) + info->MCR &= ~UART_MCR_OUT2; +#endif + + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); +#endif + return 0; +} + +/* Sending a break is a two step process on the SMC/SCC. It is accomplished + * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT + * command. We take advantage of the begin/end functions to make this + * happen. + */ +static ushort smc_chan_map[] = { + CPM_CR_CH_SMC1, + CPM_CR_CH_SMC2 +}; + +static ushort scc_chan_map[] = { + CPM_CR_CH_SCC1, + CPM_CR_CH_SCC2, + CPM_CR_CH_SCC3, + CPM_CR_CH_SCC4 +}; + +static void begin_break(ser_info_t *info) +{ + volatile QUICC *cp; + ushort chan; + int idx; + + cp = pquicc; + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) + chan = scc_chan_map[idx]; + else + chan = smc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); +} + +static void end_break(ser_info_t *info) +{ + volatile QUICC *cp; + ushort chan; + int idx; + + cp = pquicc; + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) + chan = scc_chan_map[idx]; + else + chan = smc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); +} + +/* + * This routine sends a break character out the serial port. + */ +static void send_break(ser_info_t *info, int duration) +{ + set_current_state(TASK_INTERRUPTIBLE); +#ifdef SERIAL_DEBUG_SEND_BREAK + printk("rs_send_break(%d) jiff=%lu...", duration, jiffies); +#endif + begin_break(info); + schedule_timeout(duration); + end_break(info); +#ifdef SERIAL_DEBUG_SEND_BREAK + printk("done jiffies=%lu\n", jiffies); +#endif +} + + +static int rs_360_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + int error; + ser_info_t *info = (ser_info_t *)tty->driver_data; + int retval; + struct async_icount cnow; + /* struct async_icount_24 cnow;*/ /* kernel counter temps */ + struct serial_icounter_struct *p_cuser; /* user space */ + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + + if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TCSBRK: /* SVID version: non-zero arg --> no break */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (signal_pending(current)) + return -EINTR; + if (!arg) { + send_break(info, HZ/4); /* 1/4 second */ + if (signal_pending(current)) + return -EINTR; + } + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (signal_pending(current)) + return -EINTR; + send_break(info, arg ? arg*(HZ/10) : HZ/4); + if (signal_pending(current)) + return -EINTR; + return 0; + case TIOCSBRK: + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + begin_break(info); + return 0; + case TIOCCBRK: + retval = tty_check_change(tty); + if (retval) + return retval; + end_break(info); + return 0; + case TIOCGSOFTCAR: + /* return put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg); */ + put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg); + return 0; + case TIOCSSOFTCAR: + error = get_user(arg, (unsigned int *) arg); + if (error) + return error; + tty->termios->c_cflag = + ((tty->termios->c_cflag & ~CLOCAL) | + (arg ? CLOCAL : 0)); + return 0; +#ifdef maybe + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); +#endif + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: +#ifdef modem_control + local_irq_disable(); + /* note the counters on entry */ + cprev = info->state->icount; + local_irq_enable(); + while (1) { + interruptible_sleep_on(&info->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + local_irq_disable(); + cnow = info->state->icount; /* atomic copy */ + local_irq_enable(); + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + return 0; + } + cprev = cnow; + } + /* NOTREACHED */ +#else + return 0; +#endif + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + case TIOCGICOUNT: + local_irq_disable(); + cnow = info->state->icount; + local_irq_enable(); + p_cuser = (struct serial_icounter_struct *) arg; +/* error = put_user(cnow.cts, &p_cuser->cts); */ +/* if (error) return error; */ +/* error = put_user(cnow.dsr, &p_cuser->dsr); */ +/* if (error) return error; */ +/* error = put_user(cnow.rng, &p_cuser->rng); */ +/* if (error) return error; */ +/* error = put_user(cnow.dcd, &p_cuser->dcd); */ +/* if (error) return error; */ + + put_user(cnow.cts, &p_cuser->cts); + put_user(cnow.dsr, &p_cuser->dsr); + put_user(cnow.rng, &p_cuser->rng); + put_user(cnow.dcd, &p_cuser->dcd); + return 0; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +/* FIX UP modem control here someday...... +*/ +static void rs_360_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + + if ( (tty->termios->c_cflag == old_termios->c_cflag) + && ( RELEVANT_IFLAG(tty->termios->c_iflag) + == RELEVANT_IFLAG(old_termios->c_iflag))) + return; + + change_speed(info); + +#ifdef modem_control + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && + !(tty->termios->c_cflag & CBAUD)) { + info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + (tty->termios->c_cflag & CBAUD)) { + info->MCR |= UART_MCR_DTR; + if (!tty->hw_stopped || + !(tty->termios->c_cflag & CRTSCTS)) { + info->MCR |= UART_MCR_RTS; + } + local_irq_disable(); + serial_out(info, UART_MCR, info->MCR); + local_irq_enable(); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_360_start(tty); + } +#endif + +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&info->open_wait); +#endif +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_360_close(struct tty_struct *tty, struct file * filp) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + /* struct async_state *state; */ + struct serial_state *state; + unsigned long flags; + int idx; + volatile struct smc_regs *smcp; + volatile struct scc_regs *sccp; + + if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + return; + + state = info->state; + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + DBG_CNT("before DEC-hung"); + local_irq_restore(flags); + return; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_close ttys%d, count = %d\n", info->line, state->count); +#endif + if ((tty->count == 1) && (state->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. state->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("rs_close: bad serial port count; tty->count is 1, " + "state->count is %d\n", state->count); + state->count = 1; + } + if (--state->count < 0) { + printk("rs_close: bad serial port count for ttys%d: %d\n", + info->line, state->count); + state->count = 0; + } + if (state->count) { + DBG_CNT("before DEC-2"); + local_irq_restore(flags); + return; + } + info->flags |= ASYNC_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + info->read_status_mask &= ~BD_SC_EMPTY; + if (info->flags & ASYNC_INITIALIZED) { + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + sccp = &pquicc->scc_regs[idx]; + sccp->scc_sccm &= ~UART_SCCM_RX; + sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR; + } else { + smcp = &pquicc->smc_regs[idx]; + smcp->smc_smcm &= ~SMCM_RX; + smcp->smc_smcmr &= ~SMCMR_REN; + } + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + rs_360_wait_until_sent(tty, info->timeout); + } + shutdown(info); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->tty = 0; + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); +} + +/* + * rs_wait_until_sent() --- wait until the transmitter is empty + */ +static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + unsigned long orig_jiffies, char_time; + /*int lsr;*/ + volatile QUICC_BD *bdp; + + if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) + return; + +#ifdef maybe + if (info->state->type == PORT_UNKNOWN) + return; +#endif + + orig_jiffies = jiffies; + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = 1; + if (timeout) + char_time = min(char_time, (unsigned long)timeout); +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time); + printk("jiff=%lu...", jiffies); +#endif + + /* We go through the loop at least once because we can't tell + * exactly when the last character exits the shifter. There can + * be at least two characters waiting to be sent after the buffers + * are empty. + */ + do { +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...", lsr, jiffies); +#endif +/* current->counter = 0; make us low-priority */ + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && ((orig_jiffies + timeout) < jiffies)) + break; + /* The 'tx_cur' is really the next buffer to send. We + * have to back up to the previous BD and wait for it + * to go. This isn't perfect, because all this indicates + * is the buffer is available. There are still characters + * in the CPM FIFO. + */ + bdp = info->tx_cur; + if (bdp == info->tx_bd_base) + bdp += (TX_NUM_FIFO-1); + else + bdp--; + } while (bdp->status & BD_SC_READY); + current->state = TASK_RUNNING; +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); +#endif +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void rs_360_hangup(struct tty_struct *tty) +{ + ser_info_t *info = (ser_info_t *)tty->driver_data; + struct serial_state *state = info->state; + + if (serial_paranoia_check(info, tty->name, "rs_hangup")) + return; + + state = info->state; + + rs_360_flush_buffer(tty); + shutdown(info); + info->event = 0; + state->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = 0; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + ser_info_t *info) +{ +#ifdef DO_THIS_LATER + DECLARE_WAITQUEUE(wait, current); +#endif + struct serial_state *state = info->state; + int retval; + int do_clocal = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + * If this is an SMC port, we don't have modem control to wait + * for, so just get out here. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR)) || + !(info->state->smc_scc_num & NUM_IS_SCC)) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, state->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; +#ifdef DO_THIS_LATER + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: ttys%d, count = %d\n", + state->line, state->count); +#endif + local_irq_disable(); + if (!tty_hung_up_p(filp)) + state->count--; + local_irq_enable(); + info->blocked_open++; + while (1) { + local_irq_disable(); + if (tty->termios->c_cflag & CBAUD) + serial_out(info, UART_MCR, + serial_inp(info, UART_MCR) | + (UART_MCR_DTR | UART_MCR_RTS)); + local_irq_enable(); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal || (serial_in(info, UART_MSR) & + UART_MSR_DCD))) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: ttys%d, count = %d\n", + info->line, state->count); +#endif + schedule(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + state->count++; + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: ttys%d, count = %d\n", + info->line, state->count); +#endif +#endif /* DO_THIS_LATER */ + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +static int get_async_struct(int line, ser_info_t **ret_info) +{ + struct serial_state *sstate; + + sstate = rs_table + line; + if (sstate->info) { + sstate->count++; + *ret_info = (ser_info_t *)sstate->info; + return 0; + } + else { + return -ENOMEM; + } +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int rs_360_open(struct tty_struct *tty, struct file * filp) +{ + ser_info_t *info; + int retval, line; + + line = tty->index; + if ((line < 0) || (line >= NR_PORTS)) + return -ENODEV; + retval = get_async_struct(line, &info); + if (retval) + return retval; + if (serial_paranoia_check(info, tty->name, "rs_open")) + return -ENODEV; + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open %s, count = %d\n", tty->name, info->state->count); +#endif + tty->driver_data = info; + info->tty = tty; + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) + return retval; + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open returning after block_til_ready with %d\n", + retval); +#endif + return retval; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open %s successful...", tty->name); +#endif + return 0; +} + +/* + * /proc fs routines.... + */ + +static inline int line_info(char *buf, struct serial_state *state) +{ +#ifdef notdef + struct async_struct *info = state->info, scr_info; + char stat_buf[30], control, status; +#endif + int ret; + + ret = sprintf(buf, "%d: uart:%s port:%X irq:%d", + state->line, + (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC", + (unsigned int)(state->port), state->irq); + + if (!state->port || (state->type == PORT_UNKNOWN)) { + ret += sprintf(buf+ret, "\n"); + return ret; + } + +#ifdef notdef + /* + * Figure out the current RS-232 lines + */ + if (!info) { + info = &scr_info; /* This is just for serial_{in,out} */ + + info->magic = SERIAL_MAGIC; + info->port = state->port; + info->flags = state->flags; + info->quot = 0; + info->tty = 0; + } + local_irq_disable(); + status = serial_in(info, UART_MSR); + control = info ? info->MCR : serial_in(info, UART_MCR); + local_irq_enable(); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (control & UART_MCR_RTS) + strcat(stat_buf, "|RTS"); + if (status & UART_MSR_CTS) + strcat(stat_buf, "|CTS"); + if (control & UART_MCR_DTR) + strcat(stat_buf, "|DTR"); + if (status & UART_MSR_DSR) + strcat(stat_buf, "|DSR"); + if (status & UART_MSR_DCD) + strcat(stat_buf, "|CD"); + if (status & UART_MSR_RI) + strcat(stat_buf, "|RI"); + + if (info->quot) { + ret += sprintf(buf+ret, " baud:%d", + state->baud_base / info->quot); + } + + ret += sprintf(buf+ret, " tx:%d rx:%d", + state->icount.tx, state->icount.rx); + + if (state->icount.frame) + ret += sprintf(buf+ret, " fe:%d", state->icount.frame); + + if (state->icount.parity) + ret += sprintf(buf+ret, " pe:%d", state->icount.parity); + + if (state->icount.brk) + ret += sprintf(buf+ret, " brk:%d", state->icount.brk); + + if (state->icount.overrun) + ret += sprintf(buf+ret, " oe:%d", state->icount.overrun); + + /* + * Last thing is the RS-232 status lines + */ + ret += sprintf(buf+ret, " %s\n", stat_buf+1); +#endif + return ret; +} + +int rs_360_read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int i, len = 0; + off_t begin = 0; + + len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version); + for (i = 0; i < NR_PORTS && len < 4000; i++) { + len += line_info(page + len, &rs_table[i]); + if (len+begin > off+count) + goto done; + if (len+begin < off) { + begin += len; + len = 0; + } + } + *eof = 1; +done: + if (off >= len+begin) + return 0; + *start = page + (begin-off); + return ((count < begin+len-off) ? count : begin+len-off); +} + +/* + * --------------------------------------------------------------------- + * rs_init() and friends + * + * rs_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +/* + * This routine prints out the appropriate serial driver version + * number, and identifies which options were configured into this + * driver. + */ +static _INLINE_ void show_serial_version(void) +{ + printk(KERN_INFO "%s version %s\n", serial_name, serial_version); +} + + +/* + * The serial console driver used during boot. Note that these names + * clash with those found in "serial.c", so we currently can't support + * the 16xxx uarts and these at the same time. I will fix this to become + * an indirect function call from tty_io.c (or something). + */ + +#ifdef CONFIG_SERIAL_CONSOLE + +/* + * Print a string to the serial port trying not to disturb any possible + * real use of the port... + */ +static void my_console_write(int idx, const char *s, + unsigned count) +{ + struct serial_state *ser; + ser_info_t *info; + unsigned i; + QUICC_BD *bdp, *bdbase; + volatile struct smc_uart_pram *up; + volatile u_char *cp; + + ser = rs_table + idx; + + + /* If the port has been initialized for general use, we have + * to use the buffer descriptors allocated there. Otherwise, + * we simply use the single buffer allocated. + */ + if ((info = (ser_info_t *)ser->info) != NULL) { + bdp = info->tx_cur; + bdbase = info->tx_bd_base; + } + else { + /* Pointer to UART in parameter ram. + */ + /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ + up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; + + /* Get the address of the host memory buffer. + */ + bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); + } + + /* + * We need to gracefully shut down the transmitter, disable + * interrupts, then send our bytes out. + */ + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, s++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while (bdp->status & BD_SC_READY); + + /* Send the character out. + */ + cp = bdp->buf; + *cp = *s; + + bdp->length = 1; + bdp->status |= BD_SC_READY; + + if (bdp->status & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (*s == 10) { + while (bdp->status & BD_SC_READY); + /* cp = __va(bdp->buf); */ + cp = bdp->buf; + *cp = 13; + bdp->length = 1; + bdp->status |= BD_SC_READY; + + if (bdp->status & BD_SC_WRAP) { + bdp = bdbase; + } + else { + bdp++; + } + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while (bdp->status & BD_SC_READY); + + if (info) + info->tx_cur = (QUICC_BD *)bdp; +} + +static void serial_console_write(struct console *c, const char *s, + unsigned count) +{ +#ifdef CONFIG_KGDB + /* Try to let stub handle output. Returns true if it did. */ + if (kgdb_output_string(s, count)) + return; +#endif + my_console_write(c->index, s, count); +} + + + +/*void console_print_68360(const char *p) +{ + const char *cp = p; + int i; + + for (i=0;cp[i]!=0;i++); + + serial_console_write (p, i); + + //Comment this if you want to have a strict interrupt-driven output + //rs_fair_output(); + + return; +}*/ + + + + + + +#ifdef CONFIG_XMON +int +xmon_360_write(const char *s, unsigned count) +{ + my_console_write(0, s, count); + return(count); +} +#endif + +#ifdef CONFIG_KGDB +void +putDebugChar(char ch) +{ + my_console_write(0, &ch, 1); +} +#endif + +/* + * Receive character from the serial port. This only works well + * before the port is initialized for real use. + */ +static int my_console_wait_key(int idx, int xmon, char *obuf) +{ + struct serial_state *ser; + u_char c, *cp; + ser_info_t *info; + QUICC_BD *bdp; + volatile struct smc_uart_pram *up; + int i; + + ser = rs_table + idx; + + /* Get the address of the host memory buffer. + * If the port has been initialized for general use, we must + * use information from the port structure. + */ + if ((info = (ser_info_t *)ser->info)) + bdp = info->rx_cur; + else + /* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */ + bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase); + + /* Pointer to UART in parameter ram. + */ + /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */ + up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; + + /* + * We need to gracefully shut down the receiver, disable + * interrupts, then read the input. + * XMON just wants a poll. If no character, return -1, else + * return the character. + */ + if (!xmon) { + while (bdp->status & BD_SC_EMPTY); + } + else { + if (bdp->status & BD_SC_EMPTY) + return -1; + } + + cp = (char *)bdp->buf; + + if (obuf) { + i = c = bdp->length; + while (i-- > 0) + *obuf++ = *cp++; + } + else { + c = *cp; + } + bdp->status |= BD_SC_EMPTY; + + if (info) { + if (bdp->status & BD_SC_WRAP) { + bdp = info->rx_bd_base; + } + else { + bdp++; + } + info->rx_cur = (QUICC_BD *)bdp; + } + + return((int)c); +} + +static int serial_console_wait_key(struct console *co) +{ + return(my_console_wait_key(co->index, 0, NULL)); +} + +#ifdef CONFIG_XMON +int +xmon_360_read_poll(void) +{ + return(my_console_wait_key(0, 1, NULL)); +} + +int +xmon_360_read_char(void) +{ + return(my_console_wait_key(0, 0, NULL)); +} +#endif + +#ifdef CONFIG_KGDB +static char kgdb_buf[RX_BUF_SIZE], *kgdp; +static int kgdb_chars; + +unsigned char +getDebugChar(void) +{ + if (kgdb_chars <= 0) { + kgdb_chars = my_console_wait_key(0, 0, kgdb_buf); + kgdp = kgdb_buf; + } + kgdb_chars--; + + return(*kgdp++); +} + +void kgdb_interruptible(int state) +{ +} +void kgdb_map_scc(void) +{ + struct serial_state *ser; + uint mem_addr; + volatile QUICC_BD *bdp; + volatile smc_uart_t *up; + + cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); + + /* To avoid data cache CPM DMA coherency problems, allocate a + * buffer in the CPM DPRAM. This will work until the CPM and + * serial ports are initialized. At that time a memory buffer + * will be allocated. + * The port is already initialized from the boot procedure, all + * we do here is give it a different buffer and make it a FIFO. + */ + + ser = rs_table; + + /* Right now, assume we are using SMCs. + */ + up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; + + /* Allocate space for an input FIFO, plus a few bytes for output. + * Allocate bytes to maintain word alignment. + */ + mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]); + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; + bdp->buf = mem_addr; + + bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase]; + bdp->buf = mem_addr+RX_BUF_SIZE; + + up->smc_mrblr = RX_BUF_SIZE; /* receive buffer length */ + up->smc_maxidl = RX_BUF_SIZE; +} +#endif + +static struct tty_struct *serial_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + + +struct console sercons = { + .name = "ttyS", + .write = serial_console_write, + .device = serial_console_device, + .wait_key = serial_console_wait_key, + .setup = serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = CONFIG_SERIAL_CONSOLE_PORT, +}; + + + +/* + * Register console. + */ +long console_360_init(long kmem_start, long kmem_end) +{ + register_console(&sercons); + /*register_console (console_print_68360); - 2.0.38 only required a write + function pointer. */ + return kmem_start; +} + +#endif + +/* Index in baud rate table of the default console baud rate. +*/ +static int baud_idx; + +static struct tty_operations rs_360_ops = { + .owner = THIS_MODULE, + .open = rs_360_open, + .close = rs_360_close, + .write = rs_360_write, + .put_char = rs_360_put_char, + .write_room = rs_360_write_room, + .chars_in_buffer = rs_360_chars_in_buffer, + .flush_buffer = rs_360_flush_buffer, + .ioctl = rs_360_ioctl, + .throttle = rs_360_throttle, + .unthrottle = rs_360_unthrottle, + /* .send_xchar = rs_360_send_xchar, */ + .set_termios = rs_360_set_termios, + .stop = rs_360_stop, + .start = rs_360_start, + .hangup = rs_360_hangup, + /* .wait_until_sent = rs_360_wait_until_sent, */ + /* .read_proc = rs_360_read_proc, */ + .tiocmget = rs_360_tiocmget, + .tiocmset = rs_360_tiocmset, +}; + +/* int __init rs_360_init(void) */ +int rs_360_init(void) +{ + struct serial_state * state; + ser_info_t *info; + void *mem_addr; + uint dp_addr, iobits; + int i, j, idx; + ushort chan; + QUICC_BD *bdp; + volatile QUICC *cp; + volatile struct smc_regs *sp; + volatile struct smc_uart_pram *up; + volatile struct scc_regs *scp; + volatile struct uart_pram *sup; + /* volatile immap_t *immap; */ + + serial_driver = alloc_tty_driver(NR_PORTS); + if (!serial_driver) + return -1; + + show_serial_version(); + + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + baud_idx | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &rs_360_ops); + + if (tty_register_driver(serial_driver)) + panic("Couldn't register serial driver\n"); + + cp = pquicc; /* Get pointer to Communication Processor */ + /* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */ + + + /* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O. + */ + /* The "standard" configuration through the 860. + */ +/* immap->im_ioport.iop_papar |= 0x00fc; */ +/* immap->im_ioport.iop_padir &= ~0x00fc; */ +/* immap->im_ioport.iop_paodr &= ~0x00fc; */ + cp->pio_papar |= 0x00fc; + cp->pio_padir &= ~0x00fc; + /* cp->pio_paodr &= ~0x00fc; */ + + + /* Since we don't yet do modem control, connect the port C pins + * as general purpose I/O. This will assert CTS and CD for the + * SCC ports. + */ + /* FIXME: see 360um p.7-365 and 860um p.34-12 + * I can't make sense of these bits - mleslie*/ +/* immap->im_ioport.iop_pcdir |= 0x03c6; */ +/* immap->im_ioport.iop_pcpar &= ~0x03c6; */ + +/* cp->pio_pcdir |= 0x03c6; */ +/* cp->pio_pcpar &= ~0x03c6; */ + + + + /* Connect SCC2 and SCC3 to NMSI. Connect BRG3 to SCC2 and + * BRG4 to SCC3. + */ + cp->si_sicr &= ~0x00ffff00; + cp->si_sicr |= 0x001b1200; + +#ifdef CONFIG_PP04 + /* Frequentis PP04 forced to RS-232 until we know better. + * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4. + */ + immap->im_ioport.iop_pcdir |= 0x000c; + immap->im_ioport.iop_pcpar &= ~0x000c; + immap->im_ioport.iop_pcdat &= ~0x000c; + + /* This enables the TX driver. + */ + cp->cp_pbpar &= ~0x6000; + cp->cp_pbdat &= ~0x6000; +#endif + + for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) { + state->magic = SSTATE_MAGIC; + state->line = i; + state->type = PORT_UNKNOWN; + state->custom_divisor = 0; + state->close_delay = 5*HZ/10; + state->closing_wait = 30*HZ; + state->icount.cts = state->icount.dsr = + state->icount.rng = state->icount.dcd = 0; + state->icount.rx = state->icount.tx = 0; + state->icount.frame = state->icount.parity = 0; + state->icount.overrun = state->icount.brk = 0; + printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n", + i, (unsigned int)(state->irq), + (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC"); + +#ifdef CONFIG_SERIAL_CONSOLE + /* If we just printed the message on the console port, and + * we are about to initialize it for general use, we have + * to wait a couple of character times for the CR/NL to + * make it out of the transmit buffer. + */ + if (i == CONFIG_SERIAL_CONSOLE_PORT) + mdelay(8); + + +/* idx = PORT_NUM(info->state->smc_scc_num); */ +/* if (info->state->smc_scc_num & NUM_IS_SCC) */ +/* chan = scc_chan_map[idx]; */ +/* else */ +/* chan = smc_chan_map[idx]; */ + +/* cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */ +/* while (cp->cp_cr & CPM_CR_FLG); */ + +#endif + /* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */ + info = &quicc_ser_info[i]; + if (info) { + memset (info, 0, sizeof(ser_info_t)); + info->magic = SERIAL_MAGIC; + info->line = i; + info->flags = state->flags; + INIT_WORK(&info->tqueue, do_softint, info); + INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->state = state; + state->info = (struct async_struct *)info; + + /* We need to allocate a transmit and receive buffer + * descriptors from dual port ram, and a character + * buffer area from host mem. + */ + dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO); + + /* Allocate space for FIFOs in the host memory. + * (for now this is from a static array of buffers :( + */ + /* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */ + /* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */ + mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE]; + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + bdp = (QUICC_BD *)((uint)pquicc + dp_addr); + info->rx_cur = info->rx_bd_base = bdp; + + /* initialize rx buffer descriptors */ + for (j=0; j<(RX_NUM_FIFO-1); j++) { + bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; + bdp->status = BD_SC_EMPTY | BD_SC_INTRPT; + mem_addr += RX_BUF_SIZE; + bdp++; + } + bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE]; + bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; + + + idx = PORT_NUM(info->state->smc_scc_num); + if (info->state->smc_scc_num & NUM_IS_SCC) { + +#if defined (CONFIG_UCQUICC) && 1 + /* set the transceiver mode to RS232 */ + sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */ + sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02); + *(uint *)_periph_base = sipex_mode_bits; + /* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */ +#endif + } + + dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO); + + /* Allocate space for FIFOs in the host memory. + */ + /* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */ + /* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */ + mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE]; + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ + bdp = (QUICC_BD *)((uint)pquicc + dp_addr); + info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp; + + /* initialize tx buffer descriptors */ + for (j=0; j<(TX_NUM_FIFO-1); j++) { + bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; + bdp->status = BD_SC_INTRPT; + mem_addr += TX_BUF_SIZE; + bdp++; + } + bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE]; + bdp->status = (BD_SC_WRAP | BD_SC_INTRPT); + + if (info->state->smc_scc_num & NUM_IS_SCC) { + scp = &pquicc->scc_regs[idx]; + sup = &pquicc->pram[info->state->port].scc.pscc.u; + sup->rbase = dp_addr; + sup->tbase = dp_addr; + + /* Set up the uart parameters in the + * parameter ram. + */ + sup->rfcr = SMC_EB; + sup->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single + * character interrupts. Using idle charater + * time requires some additional tuning. + */ + sup->mrblr = 1; + sup->max_idl = 0; + sup->brkcr = 1; + sup->parec = 0; + sup->frmer = 0; + sup->nosec = 0; + sup->brkec = 0; + sup->uaddr1 = 0; + sup->uaddr2 = 0; + sup->toseq = 0; + { + int i; + for (i=0;i<8;i++) + sup->cc[i] = 0x8000; + } + sup->rccm = 0xc0ff; + + /* Send the CPM an initialize command. + */ + chan = scc_chan_map[idx]; + + /* execute the INIT RX & TX PARAMS command for this channel. */ + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + scp->scc_gsmr.w.high = 0; + scp->scc_gsmr.w.low = + (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Disable all interrupts and clear all pending + * events. + */ + scp->scc_sccm = 0; + scp->scc_scce = 0xffff; + scp->scc_dsr = 0x7e7e; + scp->scc_psmr = 0x3000; + + /* If the port is the console, enable Rx and Tx. + */ +#ifdef CONFIG_SERIAL_CONSOLE + if (i == CONFIG_SERIAL_CONSOLE_PORT) + scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); +#endif + } + else { + /* Configure SMCs Tx/Rx instead of port B + * parallel I/O. + */ + up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u; + up->rbase = dp_addr; + + iobits = 0xc0 << (idx * 4); + cp->pip_pbpar |= iobits; + cp->pip_pbdir &= ~iobits; + cp->pip_pbodr &= ~iobits; + + + /* Connect the baud rate generator to the + * SMC based upon index in rs_table. Also + * make sure it is connected to NMSI. + */ + cp->si_simode &= ~(0xffff << (idx * 16)); + cp->si_simode |= (i << ((idx * 16) + 12)); + + up->tbase = dp_addr; + + /* Set up the uart parameters in the + * parameter ram. + */ + up->rfcr = SMC_EB; + up->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single + * character interrupts. Using idle charater + * time requires some additional tuning. + */ + up->mrblr = 1; + up->max_idl = 0; + up->brkcr = 1; + + /* Send the CPM an initialize command. + */ + chan = smc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, + CPM_CR_INIT_TRX) | CPM_CR_FLG; +#ifdef CONFIG_SERIAL_CONSOLE + if (i == CONFIG_SERIAL_CONSOLE_PORT) + printk(""); +#endif + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + sp = &cp->smc_regs[idx]; + sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + + /* Disable all interrupts and clear all pending + * events. + */ + sp->smc_smcm = 0; + sp->smc_smce = 0xff; + + /* If the port is the console, enable Rx and Tx. + */ +#ifdef CONFIG_SERIAL_CONSOLE + if (i == CONFIG_SERIAL_CONSOLE_PORT) + sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; +#endif + } + + /* Install interrupt handler. + */ + /* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info); */ + /*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */ + request_irq(state->irq, rs_360_interrupt, + IRQ_FLG_LOCK, "ttyS", (void *)info); + + /* Set up the baud rate generator. + */ + m360_cpm_setbrg(i, baud_table[baud_idx]); + + } + } + + return 0; +} + + + + + +/* This must always be called before the rs_360_init() function, otherwise + * it blows away the port control information. + */ +//static int __init serial_console_setup( struct console *co, char *options) +int serial_console_setup( struct console *co, char *options) +{ + struct serial_state *ser; + uint mem_addr, dp_addr, bidx, idx, iobits; + ushort chan; + QUICC_BD *bdp; + volatile QUICC *cp; + volatile struct smc_regs *sp; + volatile struct scc_regs *scp; + volatile struct smc_uart_pram *up; + volatile struct uart_pram *sup; + +/* mleslie TODO: + * add something to the 68k bootloader to store a desired initial console baud rate */ + +/* bd_t *bd; */ /* a board info struct used by EPPC-bug */ +/* bd = (bd_t *)__res; */ + + for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++) + /* if (bd->bi_baudrate == baud_table[bidx]) */ + if (CONSOLE_BAUDRATE == baud_table[bidx]) + break; + + /* co->cflag = CREAD|CLOCAL|bidx|CS8; */ + baud_idx = bidx; + + ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT; + + cp = pquicc; /* Get pointer to Communication Processor */ + + idx = PORT_NUM(ser->smc_scc_num); + if (ser->smc_scc_num & NUM_IS_SCC) { + + /* TODO: need to set up SCC pin assignment etc. here */ + + } + else { + iobits = 0xc0 << (idx * 4); + cp->pip_pbpar |= iobits; + cp->pip_pbdir &= ~iobits; + cp->pip_pbodr &= ~iobits; + + /* Connect the baud rate generator to the + * SMC based upon index in rs_table. Also + * make sure it is connected to NMSI. + */ + cp->si_simode &= ~(0xffff << (idx * 16)); + cp->si_simode |= (idx << ((idx * 16) + 12)); + } + + /* When we get here, the CPM has been reset, so we need + * to configure the port. + * We need to allocate a transmit and receive buffer descriptor + * from dual port ram, and a character buffer area from host mem. + */ + + /* Allocate space for two buffer descriptors in the DP ram. + */ + dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO); + + /* Allocate space for two 2 byte FIFOs in the host memory. + */ + /* mem_addr = m360_cpm_hostalloc(8); */ + mem_addr = (uint)console_fifos; + + + /* Set the physical address of the host memory buffers in + * the buffer descriptors. + */ + /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */ + bdp = (QUICC_BD *)((uint)pquicc + dp_addr); + bdp->buf = (char *)mem_addr; + (bdp+1)->buf = (char *)(mem_addr+4); + + /* For the receive, set empty and wrap. + * For transmit, set wrap. + */ + bdp->status = BD_SC_EMPTY | BD_SC_WRAP; + (bdp+1)->status = BD_SC_WRAP; + + /* Set up the uart parameters in the parameter ram. + */ + if (ser->smc_scc_num & NUM_IS_SCC) { + scp = &cp->scc_regs[idx]; + /* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */ + sup = &pquicc->pram[ser->port].scc.pscc.u; + + sup->rbase = dp_addr; + sup->tbase = dp_addr + sizeof(QUICC_BD); + + /* Set up the uart parameters in the + * parameter ram. + */ + sup->rfcr = SMC_EB; + sup->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single + * character interrupts. Using idle charater + * time requires some additional tuning. + */ + sup->mrblr = 1; + sup->max_idl = 0; + sup->brkcr = 1; + sup->parec = 0; + sup->frmer = 0; + sup->nosec = 0; + sup->brkec = 0; + sup->uaddr1 = 0; + sup->uaddr2 = 0; + sup->toseq = 0; + { + int i; + for (i=0;i<8;i++) + sup->cc[i] = 0x8000; + } + sup->rccm = 0xc0ff; + + /* Send the CPM an initialize command. + */ + chan = scc_chan_map[idx]; + + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + scp->scc_gsmr.w.high = 0; + scp->scc_gsmr.w.low = + (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Disable all interrupts and clear all pending + * events. + */ + scp->scc_sccm = 0; + scp->scc_scce = 0xffff; + scp->scc_dsr = 0x7e7e; + scp->scc_psmr = 0x3000; + + scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); + + } + else { + /* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */ + up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u; + + up->rbase = dp_addr; /* Base of receive buffer desc. */ + up->tbase = dp_addr+sizeof(QUICC_BD); /* Base of xmt buffer desc. */ + up->rfcr = SMC_EB; + up->tfcr = SMC_EB; + + /* Set this to 1 for now, so we get single character interrupts. + */ + up->mrblr = 1; /* receive buffer length */ + up->max_idl = 0; /* wait forever for next char */ + + /* Send the CPM an initialize command. + */ + chan = smc_chan_map[idx]; + cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG; + while (cp->cp_cr & CPM_CR_FLG); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + sp = &cp->smc_regs[idx]; + sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + + /* And finally, enable Rx and Tx. + */ + sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN; + } + + /* Set up the baud rate generator. + */ + /* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */ + m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE); + + return 0; +} + +/* + * Local variables: + * c-indent-level: 4 + * c-basic-offset: 4 + * tab-width: 4 + * End: + */ diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c new file mode 100644 index 000000000000..201c3b9924f4 --- /dev/null +++ b/drivers/serial/8250.c @@ -0,0 +1,2632 @@ +/* + * linux/drivers/char/8250.c + * + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * $Id: 8250.c,v 1.90 2002/07/28 10:03:27 rmk Exp $ + * + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. + * membase is an 'ioremapped' cookie. + */ +#include + +#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "8250.h" + +/* + * Configuration: + * share_irqs - whether we pass SA_SHIRQ to request_irq(). This option + * is unsafe when used on edge-triggered interrupts. + */ +unsigned int share_irqs = SERIAL8250_SHARE_IRQS; + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 256 + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +/* + * This converts from our new CONFIG_ symbols to the symbols + * that asm/serial.h expects. You _NEED_ to comment out the + * linux/config.h include contained inside asm/serial.h for + * this to work. + */ +#undef CONFIG_SERIAL_MANY_PORTS +#undef CONFIG_SERIAL_DETECT_IRQ +#undef CONFIG_SERIAL_MULTIPORT +#undef CONFIG_HUB6 + +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ +#define CONFIG_SERIAL_DETECT_IRQ 1 +#endif +#ifdef CONFIG_SERIAL_8250_MULTIPORT +#define CONFIG_SERIAL_MULTIPORT 1 +#endif +#ifdef CONFIG_SERIAL_8250_MANY_PORTS +#define CONFIG_SERIAL_MANY_PORTS 1 +#endif + +/* + * HUB6 is always on. This will be removed once the header + * files have been cleaned. + */ +#define CONFIG_HUB6 1 + +#include + +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#ifndef SERIAL_PORT_DFNS +#define SERIAL_PORT_DFNS +#endif + +static struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS /* defined in asm/serial.h */ +}; + +#define UART_NR (ARRAY_SIZE(old_serial_port) + CONFIG_SERIAL_8250_NR_UARTS) + +#ifdef CONFIG_SERIAL_8250_RSA + +#define PORT_RSA_MAX 4 +static unsigned long probe_rsa[PORT_RSA_MAX]; +static unsigned int probe_rsa_count; +#endif /* CONFIG_SERIAL_8250_RSA */ + +struct uart_8250_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned int capabilities; /* port capabilities */ + unsigned int tx_loadsz; /* transmit fifo load size */ + unsigned short rev; + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char lsr_break_flag; + + /* + * We provide a per-port pm hook. + */ + void (*pm)(struct uart_port *port, + unsigned int state, unsigned int old); +}; + +struct irq_info { + spinlock_t lock; + struct list_head *head; +}; + +static struct irq_info irq_lists[NR_IRQS]; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial8250_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_8250] = { + .name = "8250", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16450] = { + .name = "16450", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550] = { + .name = "16550", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16550A] = { + .name = "16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_CIRRUS] = { + .name = "Cirrus", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16650] = { + .name = "ST16650", + .fifo_size = 1, + .tx_loadsz = 1, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16650V2] = { + .name = "ST16650V2", + .fifo_size = 32, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_00, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16750] = { + .name = "TI16750", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 | + UART_FCR7_64BYTE, + .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE, + }, + [PORT_STARTECH] = { + .name = "Startech", + .fifo_size = 1, + .tx_loadsz = 1, + }, + [PORT_16C950] = { + .name = "16C950/954", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, + [PORT_16654] = { + .name = "ST16654", + .fifo_size = 64, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 | + UART_FCR_T_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_16850] = { + .name = "XR16850", + .fifo_size = 128, + .tx_loadsz = 128, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, + }, + [PORT_RSA] = { + .name = "RSA", + .fifo_size = 2048, + .tx_loadsz = 2048, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11, + .flags = UART_CAP_FIFO, + }, + [PORT_NS16550A] = { + .name = "NS16550A", + .fifo_size = 16, + .tx_loadsz = 16, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_NATSEMI, + }, + [PORT_XSCALE] = { + .name = "XScale", + .fifo_size = 32, + .tx_loadsz = 32, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_UUE, + }, +}; + +static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset) +{ + offset <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + outb(up->port.hub6 - 1 + offset, up->port.iobase); + return inb(up->port.iobase + 1); + + case UPIO_MEM: + return readb(up->port.membase + offset); + + case UPIO_MEM32: + return readl(up->port.membase + offset); + + default: + return inb(up->port.iobase + offset); + } +} + +static _INLINE_ void +serial_out(struct uart_8250_port *up, int offset, int value) +{ + offset <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_HUB6: + outb(up->port.hub6 - 1 + offset, up->port.iobase); + outb(value, up->port.iobase + 1); + break; + + case UPIO_MEM: + writeb(value, up->port.membase + offset); + break; + + case UPIO_MEM32: + writel(value, up->port.membase + offset); + break; + + default: + outb(value, up->port.iobase + offset); + } +} + +/* + * We used to support using pause I/O for certain machines. We + * haven't supported this for a while, but just in case it's badly + * needed for certain old 386 machines, I've left these #define's + * in.... + */ +#define serial_inp(up, offset) serial_in(up, offset) +#define serial_outp(up, offset, value) serial_out(up, offset, value) + + +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_8250_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} + +/* + * FIFO support. + */ +static inline void serial8250_clear_fifos(struct uart_8250_port *p) +{ + if (p->capabilities & UART_CAP_FIFO) { + serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(p, UART_FCR, 0); + } +} + +/* + * IER sleep support. UARTs which have EFRs need the "extended + * capability" bit enabled. Note that on XR16C850s, we need to + * reset LCR to write to IER. + */ +static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep) +{ + if (p->capabilities & UART_CAP_SLEEP) { + if (p->capabilities & UART_CAP_EFR) { + serial_outp(p, UART_LCR, 0xBF); + serial_outp(p, UART_EFR, UART_EFR_ECB); + serial_outp(p, UART_LCR, 0); + } + serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); + if (p->capabilities & UART_CAP_EFR) { + serial_outp(p, UART_LCR, 0xBF); + serial_outp(p, UART_EFR, 0); + serial_outp(p, UART_LCR, 0); + } + } +} + +#ifdef CONFIG_SERIAL_8250_RSA +/* + * Attempts to turn on the RSA FIFO. Returns zero on failure. + * We set the port uart clock rate if we succeed. + */ +static int __enable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; + + return result; +} + +static void enable_rsa(struct uart_8250_port *up) +{ + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + __enable_rsa(up); + spin_unlock_irq(&up->port.lock); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_outp(up, UART_RSA_FRR, 0); + } +} + +/* + * Attempts to turn off the RSA FIFO. Returns zero on failure. + * It is unknown why interrupts were disabled in here. However, + * the caller is expected to preserve this behaviour by grabbing + * the spinlock before calling this function. + */ +static void disable_rsa(struct uart_8250_port *up) +{ + unsigned char mode; + int result; + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; + spin_unlock_irq(&up->port.lock); + } +} +#endif /* CONFIG_SERIAL_8250_RSA */ + +/* + * This is a quickie test to see how big the FIFO is. + * It doesn't work at all the time, more's the pity. + */ +static int size_fifo(struct uart_8250_port *up) +{ + unsigned char old_fcr, old_mcr, old_dll, old_dlm, old_lcr; + int count; + + old_lcr = serial_inp(up, UART_LCR); + serial_outp(up, UART_LCR, 0); + old_fcr = serial_inp(up, UART_FCR); + old_mcr = serial_inp(up, UART_MCR); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_MCR, UART_MCR_LOOP); + serial_outp(up, UART_LCR, UART_LCR_DLAB); + old_dll = serial_inp(up, UART_DLL); + old_dlm = serial_inp(up, UART_DLM); + serial_outp(up, UART_DLL, 0x01); + serial_outp(up, UART_DLM, 0x00); + serial_outp(up, UART_LCR, 0x03); + for (count = 0; count < 256; count++) + serial_outp(up, UART_TX, count); + mdelay(20);/* FIXME - schedule_timeout */ + for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) && + (count < 256); count++) + serial_inp(up, UART_RX); + serial_outp(up, UART_FCR, old_fcr); + serial_outp(up, UART_MCR, old_mcr); + serial_outp(up, UART_LCR, UART_LCR_DLAB); + serial_outp(up, UART_DLL, old_dll); + serial_outp(up, UART_DLM, old_dlm); + serial_outp(up, UART_LCR, old_lcr); + + return count; +} + +/* + * Read UART ID using the divisor method - set DLL and DLM to zero + * and the revision will be in DLL and device type in DLM. We + * preserve the device state across this. + */ +static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) +{ + unsigned char old_dll, old_dlm, old_lcr; + unsigned int id; + + old_lcr = serial_inp(p, UART_LCR); + serial_outp(p, UART_LCR, UART_LCR_DLAB); + + old_dll = serial_inp(p, UART_DLL); + old_dlm = serial_inp(p, UART_DLM); + + serial_outp(p, UART_DLL, 0); + serial_outp(p, UART_DLM, 0); + + id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8; + + serial_outp(p, UART_DLL, old_dll); + serial_outp(p, UART_DLM, old_dlm); + serial_outp(p, UART_LCR, old_lcr); + + return id; +} + +/* + * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's. + * When this function is called we know it is at least a StarTech + * 16650 V2, but it might be one of several StarTech UARTs, or one of + * its clones. (We treat the broken original StarTech 16650 V1 as a + * 16550, and why not? Startech doesn't seem to even acknowledge its + * existence.) + * + * What evil have men's minds wrought... + */ +static void autoconfig_has_efr(struct uart_8250_port *up) +{ + unsigned int id1, id2, id3, rev; + + /* + * Everything with an EFR has SLEEP + */ + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + + /* + * First we check to see if it's an Oxford Semiconductor UART. + * + * If we have to do this here because some non-National + * Semiconductor clone chips lock up if you try writing to the + * LSR register (which serial_icr_read does) + */ + + /* + * Check for Oxford Semiconductor 16C950. + * + * EFR [4] must be set else this test fails. + * + * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca) + * claims that it's needed for 952 dual UART's (which are not + * recommended for new designs). + */ + up->acr = 0; + serial_out(up, UART_LCR, 0xBF); + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x00); + id1 = serial_icr_read(up, UART_ID1); + id2 = serial_icr_read(up, UART_ID2); + id3 = serial_icr_read(up, UART_ID3); + rev = serial_icr_read(up, UART_REV); + + DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev); + + if (id1 == 0x16 && id2 == 0xC9 && + (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { + up->port.type = PORT_16C950; + up->rev = rev | (id3 << 8); + return; + } + + /* + * We check for a XR16C850 by setting DLL and DLM to 0, and then + * reading back DLL and DLM. The chip type depends on the DLM + * value read back: + * 0x10 - XR16C850 and the DLL contains the chip revision. + * 0x12 - XR16C2850. + * 0x14 - XR16C854. + */ + id1 = autoconfig_read_divisor_id(up); + DEBUG_AUTOCONF("850id=%04x ", id1); + + id2 = id1 >> 8; + if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { + if (id2 == 0x10) + up->rev = id1 & 255; + up->port.type = PORT_16850; + return; + } + + /* + * It wasn't an XR16C850. + * + * We distinguish between the '654 and the '650 by counting + * how many bytes are in the FIFO. I'm using this for now, + * since that's the technique that was sent to me in the + * serial driver update, but I'm not convinced this works. + * I've had problems doing this in the past. -TYT + */ + if (size_fifo(up) == 64) + up->port.type = PORT_16654; + else + up->port.type = PORT_16650V2; +} + +/* + * We detected a chip without a FIFO. Only two fall into + * this category - the original 8250 and the 16450. The + * 16450 has a scratch register (accessible with LCR=0) + */ +static void autoconfig_8250(struct uart_8250_port *up) +{ + unsigned char scratch, status1, status2; + + up->port.type = PORT_8250; + + scratch = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0xa5); + status1 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0x5a); + status2 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, scratch); + + if (status1 == 0xa5 && status2 == 0x5a) + up->port.type = PORT_16450; +} + +static int broken_efr(struct uart_8250_port *up) +{ + /* + * Exar ST16C2550 "A2" devices incorrectly detect as + * having an EFR, and report an ID of 0x0201. See + * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf + */ + if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) + return 1; + + return 0; +} + +/* + * We know that the chip has FIFOs. Does it have an EFR? The + * EFR is located in the same register position as the IIR and + * we know the top two bits of the IIR are currently set. The + * EFR should contain zero. Try to read the EFR. + */ +static void autoconfig_16550a(struct uart_8250_port *up) +{ + unsigned char status1, status2; + unsigned int iersave; + + up->port.type = PORT_16550A; + up->capabilities |= UART_CAP_FIFO; + + /* + * Check for presence of the EFR when DLAB is set. + * Only ST16C650V1 UARTs pass this test. + */ + serial_outp(up, UART_LCR, UART_LCR_DLAB); + if (serial_in(up, UART_EFR) == 0) { + serial_outp(up, UART_EFR, 0xA8); + if (serial_in(up, UART_EFR) != 0) { + DEBUG_AUTOCONF("EFRv1 "); + up->port.type = PORT_16650; + up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP; + } else { + DEBUG_AUTOCONF("Motorola 8xxx DUART "); + } + serial_outp(up, UART_EFR, 0); + return; + } + + /* + * Maybe it requires 0xbf to be written to the LCR. + * (other ST16C650V2 UARTs, TI16C752A, etc) + */ + serial_outp(up, UART_LCR, 0xBF); + if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) { + DEBUG_AUTOCONF("EFRv2 "); + autoconfig_has_efr(up); + return; + } + + /* + * Check for a National Semiconductor SuperIO chip. + * Attempt to switch to bank 2, read the value of the LOOP bit + * from EXCR1. Switch back to bank 0, change it in MCR. Then + * switch back to bank 2, read it from EXCR1 again and check + * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 + * On PowerPC we don't want to change baud_base, as we have + * a number of different divisors. -- Tom Rini + */ + serial_outp(up, UART_LCR, 0); + status1 = serial_in(up, UART_MCR); + serial_outp(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + + if (!((status2 ^ status1) & UART_MCR_LOOP)) { + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP); + serial_outp(up, UART_LCR, 0xE0); + status2 = serial_in(up, 0x02); /* EXCR1 */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_MCR, status1); + + if ((status2 ^ status1) & UART_MCR_LOOP) { +#ifndef CONFIG_PPC + serial_outp(up, UART_LCR, 0xE0); + status1 = serial_in(up, 0x04); /* EXCR1 */ + status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ + status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ + serial_outp(up, 0x04, status1); + serial_outp(up, UART_LCR, 0); + up->port.uartclk = 921600*16; +#endif + + up->port.type = PORT_NS16550A; + up->capabilities |= UART_NATSEMI; + return; + } + } + + /* + * No EFR. Try to detect a TI16750, which only sets bit 5 of + * the IIR when 64 byte FIFO mode is enabled when DLAB is set. + * Try setting it with and without DLAB set. Cheap clones + * set bit 5 without DLAB set. + */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status1 = serial_in(up, UART_IIR) >> 5; + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, UART_LCR_DLAB); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + status2 = serial_in(up, UART_IIR) >> 5; + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, 0); + + DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2); + + if (status1 == 6 && status2 == 7) { + up->port.type = PORT_16750; + up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP; + return; + } + + /* + * Try writing and reading the UART_IER_UUE bit (b6). + * If it works, this is probably one of the Xscale platform's + * internal UARTs. + * We're going to explicitly set the UUE bit to 0 before + * trying to write and read a 1 just to make sure it's not + * already a 1 and maybe locked there before we even start start. + */ + iersave = serial_in(up, UART_IER); + serial_outp(up, UART_IER, iersave & ~UART_IER_UUE); + if (!(serial_in(up, UART_IER) & UART_IER_UUE)) { + /* + * OK it's in a known zero state, try writing and reading + * without disturbing the current state of the other bits. + */ + serial_outp(up, UART_IER, iersave | UART_IER_UUE); + if (serial_in(up, UART_IER) & UART_IER_UUE) { + /* + * It's an Xscale. + * We'll leave the UART_IER_UUE bit set to 1 (enabled). + */ + DEBUG_AUTOCONF("Xscale "); + up->port.type = PORT_XSCALE; + up->capabilities |= UART_CAP_UUE; + return; + } + } else { + /* + * If we got here we couldn't force the IER_UUE bit to 0. + * Log it and continue. + */ + DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); + } + serial_outp(up, UART_IER, iersave); +} + +/* + * This routine is called by rs_init() to initialize a specific serial + * port. It determines what type of UART chip this serial port is + * using: 8250, 16450, 16550, 16550A. The important question is + * whether or not this UART is a 16550A or not, since this will + * determine whether or not we can use its FIFO features or not. + */ +static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) +{ + unsigned char status1, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + unsigned long flags; + + if (!up->port.iobase && !up->port.mapbase && !up->port.membase) + return; + + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ", + up->port.line, up->port.iobase, up->port.membase); + + /* + * We really do need global IRQs disabled here - we're going to + * be frobbing the chips IRQ enable register to see if it exists. + */ + spin_lock_irqsave(&up->port.lock, flags); +// save_flags(flags); cli(); + + up->capabilities = 0; + + if (!(up->port.flags & UPF_BUGGY_UART)) { + /* + * Do a simple existence test first; if we fail this, + * there's no point trying anything else. + * + * 0x80 is used as a nonsense port to prevent against + * false positives due to ISA bus float. The + * assumption is that 0x80 is a non-existent port; + * which should be safe since include/asm/io.h also + * makes this assumption. + * + * Note: this is safe as long as MCR bit 4 is clear + * and the device is in "PC" mode. + */ + scratch = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + scratch2 = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0x0F); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) { + /* + * We failed; there's nothing here + */ + DEBUG_AUTOCONF("IER test failed (%02x, %02x) ", + scratch2, scratch3); + goto out; + } + } + + save_mcr = serial_in(up, UART_MCR); + save_lcr = serial_in(up, UART_LCR); + + /* + * Check to see if a UART is really there. Certain broken + * internal modems based on the Rockwell chipset fail this + * test, because they apparently don't implement the loopback + * test mode. So this test is skipped on the COM 1 through + * COM 4 ports. This *should* be safe, since no board + * manufacturer would be stupid enough to design a board + * that conflicts with COM 1-4 --- we hope! + */ + if (!(up->port.flags & UPF_SKIP_TEST)) { + serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_inp(up, UART_MSR) & 0xF0; + serial_outp(up, UART_MCR, save_mcr); + if (status1 != 0x90) { + DEBUG_AUTOCONF("LOOP test failed (%02x) ", + status1); + goto out; + } + } + + /* + * We're pretty sure there's a port here. Lets find out what + * type of port it is. The IIR top two bits allows us to find + * out if its 8250 or 16450, 16550, 16550A or later. This + * determines what we test for next. + * + * We also initialise the EFR (if any) to zero for later. The + * EFR occupies the same register location as the FCR and IIR. + */ + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, 0); + serial_outp(up, UART_LCR, 0); + + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + scratch = serial_in(up, UART_IIR) >> 6; + + DEBUG_AUTOCONF("iir=%d ", scratch); + + switch (scratch) { + case 0: + autoconfig_8250(up); + break; + case 1: + up->port.type = PORT_UNKNOWN; + break; + case 2: + up->port.type = PORT_16550; + break; + case 3: + autoconfig_16550a(up); + break; + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Only probe for RSA ports if we got the region. + */ + if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) { + int i; + + for (i = 0 ; i < probe_rsa_count; ++i) { + if (probe_rsa[i] == up->port.iobase && + __enable_rsa(up)) { + up->port.type = PORT_RSA; + break; + } + } + } +#endif + serial_outp(up, UART_LCR, save_lcr); + + if (up->capabilities != uart_config[up->port.type].flags) { + printk(KERN_WARNING + "ttyS%d: detected caps %08x should be %08x\n", + up->port.line, up->capabilities, + uart_config[up->port.type].flags); + } + + up->port.fifosize = uart_config[up->port.type].fifo_size; + up->capabilities = uart_config[up->port.type].flags; + up->tx_loadsz = uart_config[up->port.type].tx_loadsz; + + if (up->port.type == PORT_UNKNOWN) + goto out; + + /* + * Reset the UART. + */ +#ifdef CONFIG_SERIAL_8250_RSA + if (up->port.type == PORT_RSA) + serial_outp(up, UART_RSA_FRR, 0); +#endif + serial_outp(up, UART_MCR, save_mcr); + serial8250_clear_fifos(up); + (void)serial_in(up, UART_RX); + serial_outp(up, UART_IER, 0); + + out: + spin_unlock_irqrestore(&up->port.lock, flags); +// restore_flags(flags); + DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); +} + +static void autoconfig_irq(struct uart_8250_port *up) +{ + unsigned char save_mcr, save_ier; + unsigned char save_ICP = 0; + unsigned int ICP = 0; + unsigned long irqs; + int irq; + + if (up->port.flags & UPF_FOURPORT) { + ICP = (up->port.iobase & 0xfe0) | 0x1f; + save_ICP = inb_p(ICP); + outb_p(0x80, ICP); + (void) inb_p(ICP); + } + + /* forget possible initially masked and pending IRQ */ + probe_irq_off(probe_irq_on()); + save_mcr = serial_inp(up, UART_MCR); + save_ier = serial_inp(up, UART_IER); + serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); + + irqs = probe_irq_on(); + serial_outp(up, UART_MCR, 0); + udelay (10); + if (up->port.flags & UPF_FOURPORT) { + serial_outp(up, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS); + } else { + serial_outp(up, UART_MCR, + UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); + } + serial_outp(up, UART_IER, 0x0f); /* enable all intrs */ + (void)serial_inp(up, UART_LSR); + (void)serial_inp(up, UART_RX); + (void)serial_inp(up, UART_IIR); + (void)serial_inp(up, UART_MSR); + serial_outp(up, UART_TX, 0xFF); + udelay (20); + irq = probe_irq_off(irqs); + + serial_outp(up, UART_MCR, save_mcr); + serial_outp(up, UART_IER, save_ier); + + if (up->port.flags & UPF_FOURPORT) + outb_p(save_ICP, ICP); + + up->port.irq = (irq > 0) ? irq : 0; +} + +static void serial8250_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } + + /* + * We only do this from uart_stop - if we run out of + * characters to send, we don't want to prevent the + * FIFO from emptying. + */ + if (up->port.type == PORT_16C950 && tty_stop) { + up->acr |= UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void serial8250_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } + /* + * We only do this from uart_start + */ + if (tty_start && up->port.type == PORT_16C950) { + up->acr &= ~UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void serial8250_stop_rx(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void serial8250_enable_ms(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static _INLINE_ void +receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs) +{ + struct tty_struct *tty = up->port.info->tty; + unsigned char ch, lsr = *status; + int max_count = 256; + char flag; + + do { + /* The following is not allowed by the tty layer and + unsafe. It should be fixed ASAP */ + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + if (tty->low_latency) { + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); + } + /* If this failed then we will throw away the + bytes but must do so to clear interrupts */ + } + ch = serial_inp(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + +#ifdef CONFIG_SERIAL_8250_CONSOLE + /* + * Recover the break flag from console xmit + */ + if (up->port.line == up->port.cons->index) { + lsr |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + + if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (lsr & UART_LSR_PE) + up->port.icount.parity++; + else if (lsr & UART_LSR_FE) + up->port.icount.frame++; + if (lsr & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + lsr &= up->port.read_status_mask; + + if (lsr & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + flag = TTY_BREAK; + } else if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + else if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch, regs)) + goto ignore_char; + if ((lsr & up->port.ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if ((lsr & UART_LSR_OE) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + ignore_char: + lsr = serial_inp(up, UART_LSR); + } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); + *status = lsr; +} + +static _INLINE_ void transmit_chars(struct uart_8250_port *up) +{ + struct circ_buf *xmit = &up->port.info->xmit; + int count; + + if (up->port.x_char) { + serial_outp(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial8250_stop_tx(&up->port, 0); + return; + } + + count = up->tx_loadsz; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + serial8250_stop_tx(&up->port, 0); +} + +static _INLINE_ void check_modem_status(struct uart_8250_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.info->delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static inline void +serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs) +{ + unsigned int status = serial_inp(up, UART_LSR); + + DEBUG_INTR("status = %x...", status); + + if (status & UART_LSR_DR) + receive_chars(up, &status, regs); + check_modem_status(up); + if (status & UART_LSR_THRE) + transmit_chars(up); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t serial8250_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0, handled = 0; + + DEBUG_INTR("serial8250_interrupt(%d)...", irq); + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_8250_port *up; + unsigned int iir; + + up = list_entry(l, struct uart_8250_port, list); + + iir = serial_in(up, UART_IIR); + if (!(iir & UART_IIR_NO_INT)) { + spin_lock(&up->port.lock); + serial8250_handle_port(up, regs); + spin_unlock(&up->port.lock); + + handled = 1; + + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + /* If we hit this, we're dead. */ + printk(KERN_ERR "serial8250: too much work for " + "irq%d\n", irq); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_RETVAL(handled); +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + + spin_unlock_irq(&i->lock); +} + +static int serial_link_irq_chain(struct uart_8250_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0; + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + + ret = request_irq(up->port.irq, serial8250_interrupt, + irq_flags, "serial", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_8250_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) + free_irq(up->port.irq, i); + + serial_do_unlink(i, up); +} + +/* + * This function is used to handle ports that do not have an + * interrupt. This doesn't work very well for 16450's, but gives + * barely passable results for a 16550A. (Although at the expense + * of much CPU overhead). + */ +static void serial8250_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + unsigned int timeout; + unsigned int iir; + + iir = serial_in(up, UART_IIR); + if (!(iir & UART_IIR_NO_INT)) { + spin_lock(&up->port.lock); + serial8250_handle_port(up, NULL); + spin_unlock(&up->port.lock); + } + + timeout = up->port.timeout; + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + mod_timer(&up->timer, jiffies + timeout); +} + +static unsigned int serial8250_tx_empty(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial8250_get_mctrl(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; + unsigned char status; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + status = serial_in(up, UART_MSR); + spin_unlock_irqrestore(&up->port.lock, flags); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial8250_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int serial8250_startup(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; + int retval; + + up->capabilities = uart_config[up->port.type].flags; + up->mcr = 0; + + if (up->port.type == PORT_16C950) { + /* Wake up and initialize UART */ + up->acr = 0; + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_IER, 0); + serial_outp(up, UART_LCR, 0); + serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_LCR, 0); + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * If this is an RSA port, see if we can kick it up to the + * higher speed clock. + */ + enable_rsa(up); +#endif + + /* + * Clear the FIFO buffers and disable them. + * (they will be reeanbled in set_termios()) + */ + serial8250_clear_fifos(up); + + /* + * Clear the interrupt registers. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(up->port.flags & UPF_BUGGY_UART) && + (serial_inp(up, UART_LSR) == 0xff)) { + printk("ttyS%d: LSR safety check engaged!\n", up->port.line); + return -ENODEV; + } + + /* + * For a XR16C850, we need to set the trigger levels + */ + if (up->port.type == PORT_16850) { + unsigned char fctr; + + serial_outp(up, UART_LCR, 0xbf); + + fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX); + serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX); + serial_outp(up, UART_TRG, UART_TRG_96); + serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX); + serial_outp(up, UART_TRG, UART_TRG_96); + + serial_outp(up, UART_LCR, 0); + } + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!is_real_interrupt(up->port.irq)) { + unsigned int timeout = up->port.timeout; + + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + timeout); + } else { + retval = serial_link_irq_chain(up); + if (retval) + return retval; + } + + /* + * Now, initialize the UART + */ + serial_outp(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + if (!is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT1; + } else + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + if (is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT2; + + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_outp(up, UART_IER, up->ier); + + if (up->port.flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (up->port.iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + (void) inb_p(icp); + } + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + return 0; +} + +static void serial8250_shutdown(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_outp(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((up->port.iobase & 0xfe0) | 0x1f); + up->port.mctrl |= TIOCM_OUT1; + } else + up->port.mctrl &= ~TIOCM_OUT2; + + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); + serial8250_clear_fifos(up); + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Reset the RSA board back to 115kbps compat mode. + */ + disable_rsa(up); +#endif + + /* + * Read data port to reset things, and then unlink from + * the IRQ chain. + */ + (void) serial_in(up, UART_RX); + + if (!is_real_interrupt(up->port.irq)) + del_timer_sync(&up->timer); + else + serial_unlink_irq_chain(up); +} + +static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int quot; + + /* + * Handle magic divisors for baud rates above baud_base on + * SMSC SuperIO chips. + */ + if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/4)) + quot = 0x8001; + else if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/8)) + quot = 0x8002; + else + quot = uart_get_divisor(port, baud); + + return quot; +} + +static void +serial8250_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + default: + case CS8: + cval = 0x03; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= 0x04; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = serial8250_get_divisor(port, baud); + + /* + * Work around a bug in the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && + up->rev == 0x5201) + quot ++; + + if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { + if (baud < 2400) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; + else + fcr = uart_config[up->port.type].fcr; + } + + /* + * MCR-based auto flow control. When AFE is enabled, RTS will be + * deasserted when the receive FIFO contains more characters than + * the trigger, or the MCR RTS bit is cleared. In the case where + * the remote UART is not using CTS auto flow control, we must + * have sufficient FIFO entries for the latency of the remote + * UART to respond. IOW, at least 32 bytes of FIFO. + */ + if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) { + up->mcr &= ~UART_MCR_AFE; + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + } + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + if (up->capabilities & UART_CAP_UUE) + up->ier |= UART_IER_UUE | UART_IER_RTOIE; + + serial_out(up, UART_IER, up->ier); + + if (up->capabilities & UART_CAP_EFR) { + unsigned char efr = 0; + /* + * TI16C752/Startech hardware flow control. FIXME: + * - TI16C752 requires control thresholds to be set. + * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled. + */ + if (termios->c_cflag & CRTSCTS) + efr |= UART_EFR_CTS; + + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, efr); + } + + if (up->capabilities & UART_NATSEMI) { + /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */ + serial_outp(up, UART_LCR, 0xe0); + } else { + serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + } + + serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ + + /* + * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR + * is written without DLAB set, this mode will be disabled. + */ + if (up->port.type == PORT_16750) + serial_outp(up, UART_FCR, fcr); + + serial_outp(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + if (up->port.type != PORT_16750) { + if (fcr & UART_FCR_ENABLE_FIFO) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_FCR, fcr); /* set fcr */ + } + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial8250_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_8250_port *p = (struct uart_8250_port *)port; + + serial8250_set_sleep(p, state != 0); + + if (p->pm) + p->pm(port, state, oldstate); +} + +/* + * Resource handling. + */ +static int serial8250_request_std_resource(struct uart_8250_port *up) +{ + unsigned int size = 8 << up->port.regshift; + int ret = 0; + + switch (up->port.iotype) { + case UPIO_MEM: + if (!up->port.mapbase) + break; + + if (!request_mem_region(up->port.mapbase, size, "serial")) { + ret = -EBUSY; + break; + } + + if (up->port.flags & UPF_IOREMAP) { + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) { + release_mem_region(up->port.mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_HUB6: + case UPIO_PORT: + if (!request_region(up->port.iobase, size, "serial")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial8250_release_std_resource(struct uart_8250_port *up) +{ + unsigned int size = 8 << up->port.regshift; + + switch (up->port.iotype) { + case UPIO_MEM: + if (!up->port.mapbase) + break; + + if (up->port.flags & UPF_IOREMAP) { + iounmap(up->port.membase); + up->port.membase = NULL; + } + + release_mem_region(up->port.mapbase, size); + break; + + case UPIO_HUB6: + case UPIO_PORT: + release_region(up->port.iobase, size); + break; + } +} + +static int serial8250_request_rsa_resource(struct uart_8250_port *up) +{ + unsigned long start = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + int ret = 0; + + switch (up->port.iotype) { + case UPIO_MEM: + ret = -EINVAL; + break; + + case UPIO_HUB6: + case UPIO_PORT: + start += up->port.iobase; + if (!request_region(start, size, "serial-rsa")) + ret = -EBUSY; + break; + } + + return ret; +} + +static void serial8250_release_rsa_resource(struct uart_8250_port *up) +{ + unsigned long offset = UART_RSA_BASE << up->port.regshift; + unsigned int size = 8 << up->port.regshift; + + switch (up->port.iotype) { + case UPIO_MEM: + break; + + case UPIO_HUB6: + case UPIO_PORT: + release_region(up->port.iobase + offset, size); + break; + } +} + +static void serial8250_release_port(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + serial8250_release_std_resource(up); + if (up->port.type == PORT_RSA) + serial8250_release_rsa_resource(up); +} + +static int serial8250_request_port(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + int ret = 0; + + ret = serial8250_request_std_resource(up); + if (ret == 0 && up->port.type == PORT_RSA) { + ret = serial8250_request_rsa_resource(up); + if (ret < 0) + serial8250_release_std_resource(up); + } + + return ret; +} + +static void serial8250_config_port(struct uart_port *port, int flags) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + int probeflags = PROBE_ANY; + int ret; + + /* + * Don't probe for MCA ports on non-MCA machines. + */ + if (up->port.flags & UPF_BOOT_ONLYMCA && !MCA_bus) + return; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial8250_request_std_resource(up); + if (ret < 0) + return; + + ret = serial8250_request_rsa_resource(up); + if (ret < 0) + probeflags &= ~PROBE_RSA; + + if (flags & UART_CONFIG_TYPE) + autoconfig(up, probeflags); + if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) + autoconfig_irq(up); + + if (up->port.type != PORT_RSA && probeflags & PROBE_RSA) + serial8250_release_rsa_resource(up); + if (up->port.type == PORT_UNKNOWN) + serial8250_release_std_resource(up); +} + +static int +serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= NR_IRQS || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || + ser->type == PORT_STARTECH) + return -EINVAL; + return 0; +} + +static const char * +serial8250_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops serial8250_pops = { + .tx_empty = serial8250_tx_empty, + .set_mctrl = serial8250_set_mctrl, + .get_mctrl = serial8250_get_mctrl, + .stop_tx = serial8250_stop_tx, + .start_tx = serial8250_start_tx, + .stop_rx = serial8250_stop_rx, + .enable_ms = serial8250_enable_ms, + .break_ctl = serial8250_break_ctl, + .startup = serial8250_startup, + .shutdown = serial8250_shutdown, + .set_termios = serial8250_set_termios, + .pm = serial8250_pm, + .type = serial8250_type, + .release_port = serial8250_release_port, + .request_port = serial8250_request_port, + .config_port = serial8250_config_port, + .verify_port = serial8250_verify_port, +}; + +static struct uart_8250_port serial8250_ports[UART_NR]; + +static void __init serial8250_isa_init_ports(void) +{ + struct uart_8250_port *up; + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + up->port.line = i; + spin_lock_init(&up->port.lock); + + init_timer(&up->timer); + up->timer.function = serial8250_timeout; + + /* + * ALPHA_KLUDGE_MCR needs to be killed. + */ + up->mcr_mask = ~ALPHA_KLUDGE_MCR; + up->mcr_force = ALPHA_KLUDGE_MCR; + + up->port.ops = &serial8250_pops; + } + + for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port); + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = irq_canonicalize(old_serial_port[i].irq); + up->port.uartclk = old_serial_port[i].baud_base * 16; + up->port.flags = old_serial_port[i].flags; + up->port.hub6 = old_serial_port[i].hub6; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + if (share_irqs) + up->port.flags |= UPF_SHARE_IRQ; + } +} + +static void __init +serial8250_register_ports(struct uart_driver *drv, struct device *dev) +{ + int i; + + serial8250_isa_init_ports(); + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + up->port.dev = dev; + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_8250_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_8250_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial8250_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_8250_port *up = &serial8250_ports[co->index]; + unsigned int ier; + int i; + + /* + * First save the UER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + + if (up->capabilities & UART_CAP_UUE) + serial_out(up, UART_IER, UART_IER_UUE); + else + serial_out(up, UART_IER, 0); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++, s++) { + wait_for_xmitr(up); + + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, *s); + if (*s == 10) { + wait_for_xmitr(up); + serial_out(up, UART_TX, 13); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); +} + +static int serial8250_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &serial8250_ports[co->index].port; + if (!port->iobase && !port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver serial8250_reg; +static struct console serial8250_console = { + .name = "ttyS", + .write = serial8250_console_write, + .device = uart_console_device, + .setup = serial8250_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial8250_reg, +}; + +static int __init serial8250_console_init(void) +{ + serial8250_isa_init_ports(); + register_console(&serial8250_console); + return 0; +} +console_initcall(serial8250_console_init); + +static int __init find_port(struct uart_port *p) +{ + int line; + struct uart_port *port; + + for (line = 0; line < UART_NR; line++) { + port = &serial8250_ports[line].port; + if (p->iotype == port->iotype && + p->iobase == port->iobase && + p->membase == port->membase) + return line; + } + return -ENODEV; +} + +int __init serial8250_start_console(struct uart_port *port, char *options) +{ + int line; + + line = find_port(port); + if (line < 0) + return -ENODEV; + + add_preferred_console("ttyS", line, options); + printk("Adding console on ttyS%d at %s 0x%lx (options '%s')\n", + line, port->iotype == UPIO_MEM ? "MMIO" : "I/O port", + port->iotype == UPIO_MEM ? (unsigned long) port->mapbase : + (unsigned long) port->iobase, options); + if (!(serial8250_console.flags & CON_ENABLED)) { + serial8250_console.flags &= ~CON_PRINTBUFFER; + register_console(&serial8250_console); + } + return line; +} + +#define SERIAL8250_CONSOLE &serial8250_console +#else +#define SERIAL8250_CONSOLE NULL +#endif + +static struct uart_driver serial8250_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = UART_NR, + .cons = SERIAL8250_CONSOLE, +}; + +int __init early_serial_setup(struct uart_port *port) +{ + if (port->line >= ARRAY_SIZE(serial8250_ports)) + return -ENODEV; + + serial8250_isa_init_ports(); + serial8250_ports[port->line].port = *port; + serial8250_ports[port->line].port.ops = &serial8250_pops; + return 0; +} + +/** + * serial8250_suspend_port - suspend one serial port + * @line: serial line number + * @level: the level of port suspension, as per uart_suspend_port + * + * Suspend one serial port. + */ +void serial8250_suspend_port(int line) +{ + uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); +} + +/** + * serial8250_resume_port - resume one serial port + * @line: serial line number + * @level: the level of port resumption, as per uart_resume_port + * + * Resume one serial port. + */ +void serial8250_resume_port(int line) +{ + uart_resume_port(&serial8250_reg, &serial8250_ports[line].port); +} + +/* + * Register a set of serial devices attached to a platform device. The + * list is terminated with a zero flags entry, which means we expect + * all entries to have at least UPF_BOOT_AUTOCONF set. + */ +static int __devinit serial8250_probe(struct device *dev) +{ + struct plat_serial8250_port *p = dev->platform_data; + struct uart_port port; + + memset(&port, 0, sizeof(struct uart_port)); + + for (; p && p->flags != 0; p++) { + port.iobase = p->iobase; + port.membase = p->membase; + port.irq = p->irq; + port.uartclk = p->uartclk; + port.regshift = p->regshift; + port.iotype = p->iotype; + port.flags = p->flags; + port.mapbase = p->mapbase; + port.dev = dev; + if (share_irqs) + port.flags |= UPF_SHARE_IRQ; + serial8250_register_port(&port); + } + return 0; +} + +/* + * Remove serial ports registered against a platform device. + */ +static int __devexit serial8250_remove(struct device *dev) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.dev == dev) + serial8250_unregister_port(i); + } + return 0; +} + +static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level) +{ + int i; + + if (level != SUSPEND_DISABLE) + return 0; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == dev) + uart_suspend_port(&serial8250_reg, &up->port); + } + + return 0; +} + +static int serial8250_resume(struct device *dev, u32 level) +{ + int i; + + if (level != RESUME_ENABLE) + return 0; + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + if (up->port.type != PORT_UNKNOWN && up->port.dev == dev) + uart_resume_port(&serial8250_reg, &up->port); + } + + return 0; +} + +static struct device_driver serial8250_isa_driver = { + .name = "serial8250", + .bus = &platform_bus_type, + .probe = serial8250_probe, + .remove = __devexit_p(serial8250_remove), + .suspend = serial8250_suspend, + .resume = serial8250_resume, +}; + +/* + * This "device" covers _all_ ISA 8250-compatible serial devices listed + * in the table in include/asm/serial.h + */ +static struct platform_device *serial8250_isa_devs; + +/* + * serial8250_register_port and serial8250_unregister_port allows for + * 16x50 serial ports to be configured at run-time, to support PCMCIA + * modems and PCI multiport cards. + */ +static DECLARE_MUTEX(serial_sem); + +static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port) +{ + int i; + + /* + * First, find a port entry which matches. + */ + for (i = 0; i < UART_NR; i++) + if (uart_match_port(&serial8250_ports[i].port, port)) + return &serial8250_ports[i]; + + /* + * We didn't find a matching entry, so look for the first + * free entry. We look for one which hasn't been previously + * used (indicated by zero iobase). + */ + for (i = 0; i < UART_NR; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN && + serial8250_ports[i].port.iobase == 0) + return &serial8250_ports[i]; + + /* + * That also failed. Last resort is to find any entry which + * doesn't have a real port associated with it. + */ + for (i = 0; i < UART_NR; i++) + if (serial8250_ports[i].port.type == PORT_UNKNOWN) + return &serial8250_ports[i]; + + return NULL; +} + +/** + * serial8250_register_port - register a serial port + * @port: serial port template + * + * Configure the serial port specified by the request. If the + * port exists and is in use, it is hung up and unregistered + * first. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +int serial8250_register_port(struct uart_port *port) +{ + struct uart_8250_port *uart; + int ret = -ENOSPC; + + if (port->uartclk == 0) + return -EINVAL; + + down(&serial_sem); + + uart = serial8250_find_match_or_unused(port); + if (uart) { + uart_remove_one_port(&serial8250_reg, &uart->port); + + uart->port.iobase = port->iobase; + uart->port.membase = port->membase; + uart->port.irq = port->irq; + uart->port.uartclk = port->uartclk; + uart->port.fifosize = port->fifosize; + uart->port.regshift = port->regshift; + uart->port.iotype = port->iotype; + uart->port.flags = port->flags | UPF_BOOT_AUTOCONF; + uart->port.mapbase = port->mapbase; + if (port->dev) + uart->port.dev = port->dev; + + ret = uart_add_one_port(&serial8250_reg, &uart->port); + if (ret == 0) + ret = uart->port.line; + } + up(&serial_sem); + + return ret; +} +EXPORT_SYMBOL(serial8250_register_port); + +/** + * serial8250_unregister_port - remove a 16x50 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to the our control. + */ +void serial8250_unregister_port(int line) +{ + struct uart_8250_port *uart = &serial8250_ports[line]; + + down(&serial_sem); + uart_remove_one_port(&serial8250_reg, &uart->port); + if (serial8250_isa_devs) { + uart->port.flags &= ~UPF_BOOT_AUTOCONF; + uart->port.type = PORT_UNKNOWN; + uart->port.dev = &serial8250_isa_devs->dev; + uart_add_one_port(&serial8250_reg, &uart->port); + } else { + uart->port.dev = NULL; + } + up(&serial_sem); +} +EXPORT_SYMBOL(serial8250_unregister_port); + +static int __init serial8250_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: 8250/16550 driver $Revision: 1.90 $ " + "%d ports, IRQ sharing %sabled\n", (int) UART_NR, + share_irqs ? "en" : "dis"); + + for (i = 0; i < NR_IRQS; i++) + spin_lock_init(&irq_lists[i].lock); + + ret = uart_register_driver(&serial8250_reg); + if (ret) + goto out; + + serial8250_isa_devs = platform_device_register_simple("serial8250", + -1, NULL, 0); + if (IS_ERR(serial8250_isa_devs)) { + ret = PTR_ERR(serial8250_isa_devs); + goto unreg; + } + + serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev); + + ret = driver_register(&serial8250_isa_driver); + if (ret == 0) + goto out; + + platform_device_unregister(serial8250_isa_devs); + unreg: + uart_unregister_driver(&serial8250_reg); + out: + return ret; +} + +static void __exit serial8250_exit(void) +{ + struct platform_device *isa_dev = serial8250_isa_devs; + + /* + * This tells serial8250_unregister_port() not to re-register + * the ports (thereby making serial8250_isa_driver permanently + * in use.) + */ + serial8250_isa_devs = NULL; + + driver_unregister(&serial8250_isa_driver); + platform_device_unregister(isa_dev); + + uart_unregister_driver(&serial8250_reg); +} + +module_init(serial8250_init); +module_exit(serial8250_exit); + +EXPORT_SYMBOL(serial8250_suspend_port); +EXPORT_SYMBOL(serial8250_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 serial driver $Revision: 1.90 $"); + +module_param(share_irqs, uint, 0644); +MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices" + " (unsafe)"); + +#ifdef CONFIG_SERIAL_8250_RSA +module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444); +MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA"); +#endif +MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR); + +/** + * register_serial - configure a 16x50 serial port at runtime + * @req: request structure + * + * Configure the serial port specified by the request. If the + * port exists and is in use an error is returned. If the port + * is not currently in the table it is added. + * + * The port is then probed and if necessary the IRQ is autodetected + * If this fails an error is returned. + * + * On success the port is ready to use and the line number is returned. + */ +int register_serial(struct serial_struct *req) +{ + struct uart_port port; + + port.iobase = req->port; + port.membase = req->iomem_base; + port.irq = req->irq; + port.uartclk = req->baud_base * 16; + port.fifosize = req->xmit_fifo_size; + port.regshift = req->iomem_reg_shift; + port.iotype = req->io_type; + port.flags = req->flags | UPF_BOOT_AUTOCONF; + port.mapbase = req->iomap_base; + port.dev = NULL; + + if (share_irqs) + port.flags |= UPF_SHARE_IRQ; + + if (HIGH_BITS_OFFSET) + port.iobase |= (long) req->port_high << HIGH_BITS_OFFSET; + + /* + * If a clock rate wasn't specified by the low level driver, then + * default to the standard clock rate. This should be 115200 (*16) + * and should not depend on the architecture's BASE_BAUD definition. + * However, since this API will be deprecated, it's probably a + * better idea to convert the drivers to use the new API + * (serial8250_register_port and serial8250_unregister_port). + */ + if (port.uartclk == 0) { + printk(KERN_WARNING + "Serial: registering port at [%08x,%08lx,%p] irq %d with zero baud_base\n", + port.iobase, port.mapbase, port.membase, port.irq); + printk(KERN_WARNING "Serial: see %s:%d for more information\n", + __FILE__, __LINE__); + dump_stack(); + + /* + * Fix it up for now, but this is only a temporary measure. + */ + port.uartclk = BASE_BAUD * 16; + } + + return serial8250_register_port(&port); +} +EXPORT_SYMBOL(register_serial); + +/** + * unregister_serial - remove a 16x50 serial port at runtime + * @line: serial line number + * + * Remove one serial port. This may not be called from interrupt + * context. We hand the port back to our local PM control. + */ +void unregister_serial(int line) +{ + serial8250_unregister_port(line); +} +EXPORT_SYMBOL(unregister_serial); diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h new file mode 100644 index 000000000000..4f3d62f222f4 --- /dev/null +++ b/drivers/serial/8250.h @@ -0,0 +1,87 @@ +/* + * linux/drivers/char/8250.h + * + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $ + */ + +#include + +int serial8250_register_port(struct uart_port *); +void serial8250_unregister_port(int line); +void serial8250_suspend_port(int line); +void serial8250_resume_port(int line); + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + unsigned int flags; + unsigned char hub6; + unsigned char io_type; + unsigned char *iomem_base; + unsigned short iomem_reg_shift; +}; + +/* + * This replaces serial_uart_config in include/linux/serial.h + */ +struct serial8250_config { + const char *name; + unsigned short fifo_size; + unsigned short tx_loadsz; + unsigned char fcr; + unsigned int flags; +}; + +#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */ +#define UART_CAP_EFR (1 << 9) /* UART has EFR */ +#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */ +#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */ +#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ + +#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486)) +#define _INLINE_ inline +#else +#define _INLINE_ +#endif + +#define PROBE_RSA (1 << 0) +#define PROBE_ANY (~0) + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +#ifdef CONFIG_SERIAL_8250_SHARE_IRQ +#define SERIAL8250_SHARE_IRQS 1 +#else +#define SERIAL8250_SHARE_IRQS 0 +#endif + +#if defined(__alpha__) && !defined(CONFIG_PCI) +/* + * Digital did something really horribly wrong with the OUT1 and OUT2 + * lines on at least some ALPHA's. The failure mode is that if either + * is cleared, the machine locks up with endless interrupts. + */ +#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1) +#elif defined(CONFIG_SBC8560) +/* + * WindRiver did something similarly broken on their SBC8560 board. The + * UART tristates its IRQ output while OUT2 is clear, but they pulled + * the interrupt line _up_ instead of down, so if we register the IRQ + * while the UART is in that state, we die in an IRQ storm. */ +#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) +#else +#define ALPHA_KLUDGE_MCR 0 +#endif diff --git a/drivers/serial/8250_acorn.c b/drivers/serial/8250_acorn.c new file mode 100644 index 000000000000..32af3650e8b4 --- /dev/null +++ b/drivers/serial/8250_acorn.c @@ -0,0 +1,142 @@ +/* + * linux/drivers/serial/acorn.c + * + * Copyright (C) 1996-2003 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "8250.h" + +#define MAX_PORTS 3 + +struct serial_card_type { + unsigned int num_ports; + unsigned int uartclk; + unsigned int type; + unsigned int offset[MAX_PORTS]; +}; + +struct serial_card_info { + unsigned int num_ports; + int ports[MAX_PORTS]; +}; + +static int __devinit +serial_card_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + struct serial_card_info *info; + struct serial_card_type *type = id->data; + struct uart_port port; + unsigned long bus_addr; + unsigned char __iomem *virt_addr; + unsigned int i; + + info = kmalloc(sizeof(struct serial_card_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + memset(info, 0, sizeof(struct serial_card_info)); + info->num_ports = type->num_ports; + + bus_addr = ecard_resource_start(ec, type->type); + virt_addr = ioremap(bus_addr, ecard_resource_len(ec, type->type)); + if (!virt_addr) { + kfree(info); + return -ENOMEM; + } + + ecard_set_drvdata(ec, info); + + memset(&port, 0, sizeof(struct uart_port)); + port.irq = ec->irq; + port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; + port.uartclk = type->uartclk; + port.iotype = UPIO_MEM; + port.regshift = 2; + port.dev = &ec->dev; + + for (i = 0; i < info->num_ports; i ++) { + port.membase = virt_addr + type->offset[i]; + port.mapbase = bus_addr + type->offset[i]; + + info->ports[i] = serial8250_register_port(&port); + } + + return 0; +} + +static void __devexit serial_card_remove(struct expansion_card *ec) +{ + struct serial_card_info *info = ecard_get_drvdata(ec); + int i; + + ecard_set_drvdata(ec, NULL); + + for (i = 0; i < info->num_ports; i++) + if (info->ports[i] > 0) + serial8250_unregister_port(info->ports[i]); + + kfree(info); +} + +static struct serial_card_type atomwide_type = { + .num_ports = 3, + .uartclk = 7372800, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2800, 0x2400, 0x2000 }, +}; + +static struct serial_card_type serport_type = { + .num_ports = 2, + .uartclk = 3686400, + .type = ECARD_RES_IOCSLOW, + .offset = { 0x2000, 0x2020 }, +}; + +static const struct ecard_id serial_cids[] = { + { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type }, + { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver serial_card_driver = { + .probe = serial_card_probe, + .remove = __devexit_p(serial_card_remove), + .id_table = serial_cids, + .drv = { + .name = "8250_acorn", + }, +}; + +static int __init serial_card_init(void) +{ + return ecard_register_driver(&serial_card_driver); +} + +static void __exit serial_card_exit(void) +{ + ecard_remove_driver(&serial_card_driver); +} + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver"); +MODULE_LICENSE("GPL"); + +module_init(serial_card_init); +module_exit(serial_card_exit); diff --git a/drivers/serial/8250_acpi.c b/drivers/serial/8250_acpi.c new file mode 100644 index 000000000000..6b9ead288517 --- /dev/null +++ b/drivers/serial/8250_acpi.c @@ -0,0 +1,171 @@ +/* + * Copyright (c) 2002-2003 Matthew Wilcox for Hewlett-Packard + * Copyright (C) 2004 Hewlett-Packard Co + * Bjorn Helgaas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include + +#include + +#include + +#include "8250.h" + +struct serial_private { + int line; +}; + +static acpi_status acpi_serial_mmio(struct uart_port *port, + struct acpi_resource_address64 *addr) +{ + port->mapbase = addr->min_address_range; + port->iotype = UPIO_MEM; + port->flags |= UPF_IOREMAP; + return AE_OK; +} + +static acpi_status acpi_serial_port(struct uart_port *port, + struct acpi_resource_io *io) +{ + if (io->range_length) { + port->iobase = io->min_base_address; + port->iotype = UPIO_PORT; + } else + printk(KERN_ERR "%s: zero-length IO port range?\n", __FUNCTION__); + return AE_OK; +} + +static acpi_status acpi_serial_ext_irq(struct uart_port *port, + struct acpi_resource_ext_irq *ext_irq) +{ + if (ext_irq->number_of_interrupts > 0) + port->irq = acpi_register_gsi(ext_irq->interrupts[0], + ext_irq->edge_level, ext_irq->active_high_low); + return AE_OK; +} + +static acpi_status acpi_serial_irq(struct uart_port *port, + struct acpi_resource_irq *irq) +{ + if (irq->number_of_interrupts > 0) + port->irq = acpi_register_gsi(irq->interrupts[0], + irq->edge_level, irq->active_high_low); + return AE_OK; +} + +static acpi_status acpi_serial_resource(struct acpi_resource *res, void *data) +{ + struct uart_port *port = (struct uart_port *) data; + struct acpi_resource_address64 addr; + acpi_status status; + + status = acpi_resource_to_address64(res, &addr); + if (ACPI_SUCCESS(status)) + return acpi_serial_mmio(port, &addr); + else if (res->id == ACPI_RSTYPE_IO) + return acpi_serial_port(port, &res->data.io); + else if (res->id == ACPI_RSTYPE_EXT_IRQ) + return acpi_serial_ext_irq(port, &res->data.extended_irq); + else if (res->id == ACPI_RSTYPE_IRQ) + return acpi_serial_irq(port, &res->data.irq); + return AE_OK; +} + +static int acpi_serial_add(struct acpi_device *device) +{ + struct serial_private *priv; + acpi_status status; + struct uart_port port; + int result; + + memset(&port, 0, sizeof(struct uart_port)); + + port.uartclk = 1843200; + port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + + priv = kmalloc(sizeof(struct serial_private), GFP_KERNEL); + if (!priv) { + result = -ENOMEM; + goto fail; + } + memset(priv, 0, sizeof(*priv)); + + status = acpi_walk_resources(device->handle, METHOD_NAME__CRS, + acpi_serial_resource, &port); + if (ACPI_FAILURE(status)) { + result = -ENODEV; + goto fail; + } + + if (!port.mapbase && !port.iobase) { + printk(KERN_ERR "%s: no iomem or port address in %s _CRS\n", + __FUNCTION__, device->pnp.bus_id); + result = -ENODEV; + goto fail; + } + + priv->line = serial8250_register_port(&port); + if (priv->line < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", + device->pnp.bus_id, priv->line); + result = -ENODEV; + goto fail; + } + + acpi_driver_data(device) = priv; + return 0; + +fail: + kfree(priv); + + return result; +} + +static int acpi_serial_remove(struct acpi_device *device, int type) +{ + struct serial_private *priv; + + if (!device || !acpi_driver_data(device)) + return -EINVAL; + + priv = acpi_driver_data(device); + serial8250_unregister_port(priv->line); + kfree(priv); + + return 0; +} + +static struct acpi_driver acpi_serial_driver = { + .name = "serial", + .class = "", + .ids = "PNP0501", + .ops = { + .add = acpi_serial_add, + .remove = acpi_serial_remove, + }, +}; + +static int __init acpi_serial_init(void) +{ + return acpi_bus_register_driver(&acpi_serial_driver); +} + +static void __exit acpi_serial_exit(void) +{ + acpi_bus_unregister_driver(&acpi_serial_driver); +} + +module_init(acpi_serial_init); +module_exit(acpi_serial_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 ACPI serial driver"); diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c new file mode 100644 index 000000000000..b7a5dd710228 --- /dev/null +++ b/drivers/serial/8250_early.c @@ -0,0 +1,255 @@ +/* + * Early serial console for 8250/16550 devices + * + * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King, + * and on early_printk.c by Andi Kleen. + * + * This is for use before the serial driver has initialized, in + * particular, before the UARTs have been discovered and named. + * Instead of specifying the console device as, e.g., "ttyS0", + * we locate the device directly by its MMIO or I/O port address. + * + * The user can specify the device directly, e.g., + * console=uart,io,0x3f8,9600n8 + * console=uart,mmio,0xff5e0000,115200n8 + * or platform code can call early_uart_console_init() to set + * the early UART device. + * + * After the normal serial driver starts, we try to locate the + * matching ttyS device and start a console there. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct early_uart_device { + struct uart_port port; + char options[16]; /* e.g., 115200n8 */ + unsigned int baud; +}; + +static struct early_uart_device early_device __initdata; +static int early_uart_registered __initdata; + +static unsigned int __init serial_in(struct uart_port *port, int offset) +{ + if (port->iotype == UPIO_MEM) + return readb(port->membase + offset); + else + return inb(port->iobase + offset); +} + +static void __init serial_out(struct uart_port *port, int offset, int value) +{ + if (port->iotype == UPIO_MEM) + writeb(value, port->membase + offset); + else + outb(value, port->iobase + offset); +} + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void __init wait_for_xmitr(struct uart_port *port) +{ + unsigned int status; + + for (;;) { + status = serial_in(port, UART_LSR); + if ((status & BOTH_EMPTY) == BOTH_EMPTY) + return; + cpu_relax(); + } +} + +static void __init putc(struct uart_port *port, unsigned char c) +{ + wait_for_xmitr(port); + serial_out(port, UART_TX, c); +} + +static void __init early_uart_write(struct console *console, const char *s, unsigned int count) +{ + struct uart_port *port = &early_device.port; + unsigned int ier; + + /* Save the IER and disable interrupts */ + ier = serial_in(port, UART_IER); + serial_out(port, UART_IER, 0); + + while (*s && count-- > 0) { + putc(port, *s); + if (*s == '\n') + putc(port, '\r'); + s++; + } + + /* Wait for transmitter to become empty and restore the IER */ + wait_for_xmitr(port); + serial_out(port, UART_IER, ier); +} + +static unsigned int __init probe_baud(struct uart_port *port) +{ + unsigned char lcr, dll, dlm; + unsigned int quot; + + lcr = serial_in(port, UART_LCR); + serial_out(port, UART_LCR, lcr | UART_LCR_DLAB); + dll = serial_in(port, UART_DLL); + dlm = serial_in(port, UART_DLM); + serial_out(port, UART_LCR, lcr); + + quot = (dlm << 8) | dll; + return (port->uartclk / 16) / quot; +} + +static void __init init_port(struct early_uart_device *device) +{ + struct uart_port *port = &device->port; + unsigned int divisor; + unsigned char c; + + serial_out(port, UART_LCR, 0x3); /* 8n1 */ + serial_out(port, UART_IER, 0); /* no interrupt */ + serial_out(port, UART_FCR, 0); /* no fifo */ + serial_out(port, UART_MCR, 0x3); /* DTR + RTS */ + + divisor = port->uartclk / (16 * device->baud); + c = serial_in(port, UART_LCR); + serial_out(port, UART_LCR, c | UART_LCR_DLAB); + serial_out(port, UART_DLL, divisor & 0xff); + serial_out(port, UART_DLM, (divisor >> 8) & 0xff); + serial_out(port, UART_LCR, c & ~UART_LCR_DLAB); +} + +static int __init parse_options(struct early_uart_device *device, char *options) +{ + struct uart_port *port = &device->port; + int mapsize = 64; + int mmio, length; + + if (!options) + return -ENODEV; + + port->uartclk = BASE_BAUD * 16; + if (!strncmp(options, "mmio,", 5)) { + port->iotype = UPIO_MEM; + port->mapbase = simple_strtoul(options + 5, &options, 0); + port->membase = ioremap(port->mapbase, mapsize); + if (!port->membase) { + printk(KERN_ERR "%s: Couldn't ioremap 0x%lx\n", + __FUNCTION__, port->mapbase); + return -ENOMEM; + } + mmio = 1; + } else if (!strncmp(options, "io,", 3)) { + port->iotype = UPIO_PORT; + port->iobase = simple_strtoul(options + 3, &options, 0); + mmio = 0; + } else + return -EINVAL; + + if ((options = strchr(options, ','))) { + options++; + device->baud = simple_strtoul(options, 0, 0); + length = min(strcspn(options, " "), sizeof(device->options)); + strncpy(device->options, options, length); + } else { + device->baud = probe_baud(port); + snprintf(device->options, sizeof(device->options), "%u", + device->baud); + } + + printk(KERN_INFO "Early serial console at %s 0x%lx (options '%s')\n", + mmio ? "MMIO" : "I/O port", + mmio ? port->mapbase : (unsigned long) port->iobase, + device->options); + return 0; +} + +static int __init early_uart_setup(struct console *console, char *options) +{ + struct early_uart_device *device = &early_device; + int err; + + if (device->port.membase || device->port.iobase) + return 0; + + if ((err = parse_options(device, options)) < 0) + return err; + + init_port(device); + return 0; +} + +static struct console early_uart_console __initdata = { + .name = "uart", + .write = early_uart_write, + .setup = early_uart_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int __init early_uart_console_init(void) +{ + if (!early_uart_registered) { + register_console(&early_uart_console); + early_uart_registered = 1; + } + return 0; +} +console_initcall(early_uart_console_init); + +int __init early_serial_console_init(char *cmdline) +{ + char *options; + int err; + + options = strstr(cmdline, "console=uart,"); + if (!options) + return -ENODEV; + + options = strchr(cmdline, ',') + 1; + if ((err = early_uart_setup(NULL, options)) < 0) + return err; + return early_uart_console_init(); +} + +static int __init early_uart_console_switch(void) +{ + struct early_uart_device *device = &early_device; + struct uart_port *port = &device->port; + int mmio, line; + + if (!(early_uart_console.flags & CON_ENABLED)) + return 0; + + /* Try to start the normal driver on a matching line. */ + mmio = (port->iotype == UPIO_MEM); + line = serial8250_start_console(port, device->options); + if (line < 0) + printk("No ttyS device at %s 0x%lx for console\n", + mmio ? "MMIO" : "I/O port", + mmio ? port->mapbase : + (unsigned long) port->iobase); + + unregister_console(&early_uart_console); + if (mmio) + iounmap(port->membase); + + return 0; +} +late_initcall(early_uart_console_switch); diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c new file mode 100644 index 000000000000..431aa5761a7a --- /dev/null +++ b/drivers/serial/8250_gsc.c @@ -0,0 +1,120 @@ +/* + * Serial Device Initialisation for Lasi/Asp/Wax/Dino + * + * (c) Copyright Matthew Wilcox 2001-2002 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include /* for LASI_BASE_BAUD */ + +#include "8250.h" + +static int __init +serial_init_chip(struct parisc_device *dev) +{ + static int serial_line_nr; + struct uart_port port; + unsigned long address; + int err; + + if (!dev->irq) { + /* We find some unattached serial ports by walking native + * busses. These should be silently ignored. Otherwise, + * what we have here is a missing parent device, so tell + * the user what they're missing. + */ + if (parisc_parent(dev)->id.hw_type != HPHW_IOA) { + printk(KERN_INFO "Serial: device 0x%lx not configured.\n" + "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa); + } + return -ENODEV; + } + + address = dev->hpa; + if (dev->id.sversion != 0x8d) { + address += 0x800; + } + + memset(&port, 0, sizeof(struct uart_port)); + port.mapbase = address; + port.irq = dev->irq; + port.iotype = UPIO_MEM; + port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + port.uartclk = LASI_BASE_BAUD * 16; + port.dev = &dev->dev; + + err = serial8250_register_port(&port); + if (err < 0) { + printk(KERN_WARNING "serial8250_register_port returned error %d\n", err); + return err; + } + + return 0; +} + +static struct parisc_device_id serial_tbl[] = { + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c }, + { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d }, + { 0 } +}; + +/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1 + * attached to Dino. Unfortunately, Dino appears before Lasi in the device + * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one + * which only knows about Lasi and then a second which will find all the + * other serial ports. HPUX ignores this problem. + */ +static struct parisc_device_id lasi_tbl[] = { + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */ + { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */ + { 0 } +}; + + +MODULE_DEVICE_TABLE(parisc, serial_tbl); + +static struct parisc_driver lasi_driver = { + .name = "serial_1", + .id_table = lasi_tbl, + .probe = serial_init_chip, +}; + +static struct parisc_driver serial_driver = { + .name = "serial", + .id_table = serial_tbl, + .probe = serial_init_chip, +}; + +int __init probe_serial_gsc(void) +{ + register_parisc_driver(&lasi_driver); + register_parisc_driver(&serial_driver); + return 0; +} + +module_init(probe_serial_gsc); diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c new file mode 100644 index 000000000000..b8d51eb56bff --- /dev/null +++ b/drivers/serial/8250_hp300.c @@ -0,0 +1,329 @@ +/* + * Driver for the 98626/98644/internal serial interface on hp300/hp400 + * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs) + * + * Ported from 2.2 and modified to use the normal 8250 driver + * by Kars de Jong , May 2004. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI) +#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? +#endif + +#ifdef CONFIG_HPAPCI +struct hp300_port +{ + struct hp300_port *next; /* next port */ + int line; /* line (tty) number */ +}; + +static struct hp300_port *hp300_ports; +#endif + +#ifdef CONFIG_HPDCA + +static int __devinit hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent); +static void __devexit hpdca_remove_one(struct dio_dev *d); + +static struct dio_device_id hpdca_dio_tbl[] = { + { DIO_ID_DCA0 }, + { DIO_ID_DCA0REM }, + { DIO_ID_DCA1 }, + { DIO_ID_DCA1REM }, + { 0 } +}; + +static struct dio_driver hpdca_driver = { + .name = "hpdca", + .id_table = hpdca_dio_tbl, + .probe = hpdca_init_one, + .remove = __devexit_p(hpdca_remove_one), +}; + +#endif + +extern int hp300_uart_scode; + +/* Offset to UART registers from base of DCA */ +#define UART_OFFSET 17 + +#define DCA_ID 0x01 /* ID (read), reset (write) */ +#define DCA_IC 0x03 /* Interrupt control */ + +/* Interrupt control */ +#define DCA_IC_IE 0x80 /* Master interrupt enable */ + +#define HPDCA_BAUD_BASE 153600 + +/* Base address of the Frodo part */ +#define FRODO_BASE (0x41c000) + +/* + * Where we find the 8250-like APCI ports, and how far apart they are. + */ +#define FRODO_APCIBASE 0x0 +#define FRODO_APCISPACE 0x20 +#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE)) + +#define HPAPCI_BAUD_BASE 500400 + +#ifdef CONFIG_SERIAL_8250_CONSOLE +/* + * Parse the bootinfo to find descriptions for headless console and + * debug serial ports and register them with the 8250 driver. + * This function should be called before serial_console_init() is called + * to make sure the serial console will be available for use. IA-64 kernel + * calls this function from setup_arch() after the EFI and ACPI tables have + * been parsed. + */ +int __init hp300_setup_serial_console(void) +{ + int scode; + struct uart_port port; + + memset(&port, 0, sizeof(port)); + + if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX) + return 0; + + if (DIO_SCINHOLE(hp300_uart_scode)) + return 0; + + scode = hp300_uart_scode; + + /* Memory mapped I/O */ + port.iotype = UPIO_MEM; + port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + port.type = PORT_UNKNOWN; + + /* Check for APCI console */ + if (scode == 256) { +#ifdef CONFIG_HPAPCI + printk(KERN_INFO "Serial console is HP APCI 1\n"); + + port.uartclk = HPAPCI_BAUD_BASE * 16; + port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1)); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 2; + add_preferred_console("ttyS", port.line, "9600n8"); +#else + printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n"); + return 0; +#endif + } + else { +#ifdef CONFIG_HPDCA + unsigned long pa = dio_scodetophysaddr(scode); + if (!pa) { + return 0; + } + + printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode); + + port.uartclk = HPDCA_BAUD_BASE * 16; + port.mapbase = (pa + UART_OFFSET); + port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE); + port.regshift = 1; + port.irq = DIO_IPL(pa + DIO_VIRADDRBASE); + + /* Enable board-interrupts */ + out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + + if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) { + add_preferred_console("ttyS", port.line, "9600n8"); + } +#else + printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n"); + return 0; +#endif + } + + if (early_serial_setup(&port) < 0) { + printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n"); + } + + return 0; +} +#endif /* CONFIG_SERIAL_8250_CONSOLE */ + +#ifdef CONFIG_HPDCA +static int __devinit hpdca_init_one(struct dio_dev *d, + const struct dio_device_id *ent) +{ + struct serial_struct serial_req; + int line; + +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (hp300_uart_scode == d->scode) { + /* Already got it. */ + return 0; + } +#endif + memset(&serial_req, 0, sizeof(struct serial_struct)); + + /* Memory mapped I/O */ + serial_req.io_type = SERIAL_IO_MEM; + serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + serial_req.irq = d->ipl; + serial_req.baud_base = HPDCA_BAUD_BASE; + serial_req.iomap_base = (d->resource.start + UART_OFFSET); + serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE); + serial_req.iomem_reg_shift = 1; + line = register_serial(&serial_req); + + if (line < 0) { + printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d" + " irq %d failed\n", d->scode, serial_req.irq); + return -ENOMEM; + } + + /* Enable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE); + dio_set_drvdata(d, (void *)line); + + /* Reset the DCA */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff); + udelay(100); + + return 0; +} +#endif + +static int __init hp300_8250_init(void) +{ + static int called = 0; + int num_ports; +#ifdef CONFIG_HPAPCI + int line; + unsigned long base; + struct serial_struct serial_req; + struct hp300_port *port; + int i; +#endif + if (called) + return -ENODEV; + called = 1; + + if (!MACH_IS_HP300) + return -ENODEV; + + num_ports = 0; + +#ifdef CONFIG_HPDCA + if (dio_module_init(&hpdca_driver) == 0) + num_ports++; +#endif +#ifdef CONFIG_HPAPCI + if (hp300_model < HP_400) { + if (!num_ports) + return -ENODEV; + return 0; + } + /* These models have the Frodo chip. + * Port 0 is reserved for the Apollo Domain keyboard. + * Port 1 is either the console or the DCA. + */ + for (i = 1; i < 4; i++) { + /* Port 1 is the console on a 425e, on other machines it's mapped to + * DCA. + */ +#ifdef CONFIG_SERIAL_8250_CONSOLE + if (i == 1) { + continue; + } +#endif + + /* Create new serial device */ + port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + memset(&serial_req, 0, sizeof(struct serial_struct)); + + base = (FRODO_BASE + FRODO_APCI_OFFSET(i)); + + /* Memory mapped I/O */ + serial_req.io_type = SERIAL_IO_MEM; + serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF; + /* XXX - no interrupt support yet */ + serial_req.irq = 0; + serial_req.baud_base = HPAPCI_BAUD_BASE; + serial_req.iomap_base = base; + serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE); + serial_req.iomem_reg_shift = 2; + + line = register_serial(&serial_req); + + if (line < 0) { + printk(KERN_NOTICE "8250_hp300: register_serial() APCI %d" + " irq %d failed\n", i, serial_req.irq); + kfree(port); + continue; + } + + port->line = line; + port->next = hp300_ports; + hp300_ports = port; + + num_ports++; + } +#endif + + /* Any boards found? */ + if (!num_ports) + return -ENODEV; + + return 0; +} + +#ifdef CONFIG_HPDCA +static void __devexit hpdca_remove_one(struct dio_dev *d) +{ + int line; + + line = (int) dio_get_drvdata(d); + if (d->resource.start) { + /* Disable board-interrupts */ + out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0); + } + unregister_serial(line); +} +#endif + +static void __exit hp300_8250_exit(void) +{ +#ifdef CONFIG_HPAPCI + struct hp300_port *port, *to_free; + + for (port = hp300_ports; port; ) { + unregister_serial(port->line); + to_free = port; + port = port->next; + kfree(to_free); + } + + hp300_ports = NULL; +#endif +#ifdef CONFIG_HPDCA + dio_unregister_driver(&hpdca_driver); +#endif +} + +module_init(hp300_8250_init); +module_exit(hp300_8250_exit); +MODULE_DESCRIPTION("HP DCA/APCI serial driver"); +MODULE_AUTHOR("Kars de Jong "); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c new file mode 100644 index 000000000000..f8d90d0ecfea --- /dev/null +++ b/drivers/serial/8250_pci.c @@ -0,0 +1,2303 @@ +/* + * linux/drivers/char/8250_pci.c + * + * Probe module for 8250/16550-type PCI serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $ + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "8250.h" + +#undef SERIAL_DEBUG_PCI + +/* + * Definitions for PCI support. + */ +#define FL_BASE_MASK 0x0007 +#define FL_BASE0 0x0000 +#define FL_BASE1 0x0001 +#define FL_BASE2 0x0002 +#define FL_BASE3 0x0003 +#define FL_BASE4 0x0004 +#define FL_GET_BASE(x) (x & FL_BASE_MASK) + +/* Use successive BARs (PCI base address registers), + else use offset into some specified BAR */ +#define FL_BASE_BARS 0x0008 + +/* do not assign an irq */ +#define FL_NOIRQ 0x0080 + +/* Use the Base address register size to cap number of ports */ +#define FL_REGION_SZ_CAP 0x0100 + +struct pci_board { + unsigned int flags; + unsigned int num_ports; + unsigned int base_baud; + unsigned int uart_offset; + unsigned int reg_shift; + unsigned int first_offset; +}; + +/* + * init function returns: + * > 0 - number of ports + * = 0 - use board->num_ports + * < 0 - error + */ +struct pci_serial_quirk { + u32 vendor; + u32 device; + u32 subvendor; + u32 subdevice; + int (*init)(struct pci_dev *dev); + int (*setup)(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx); + void (*exit)(struct pci_dev *dev); +}; + +#define PCI_NUM_BAR_RESOURCES 6 + +struct serial_private { + unsigned int nr; + void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; + struct pci_serial_quirk *quirk; + int line[0]; +}; + +static void moan_device(const char *str, struct pci_dev *dev) +{ + printk(KERN_WARNING "%s: %s\n" + KERN_WARNING "Please send the output of lspci -vv, this\n" + KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" + KERN_WARNING "manufacturer and name of serial board or\n" + KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n", + pci_name(dev), str, dev->vendor, dev->device, + dev->subsystem_vendor, dev->subsystem_device); +} + +static int +setup_port(struct pci_dev *dev, struct uart_port *port, + int bar, int offset, int regshift) +{ + struct serial_private *priv = pci_get_drvdata(dev); + unsigned long base, len; + + if (bar >= PCI_NUM_BAR_RESOURCES) + return -EINVAL; + + if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { + base = pci_resource_start(dev, bar); + len = pci_resource_len(dev, bar); + + if (!priv->remapped_bar[bar]) + priv->remapped_bar[bar] = ioremap(base, len); + if (!priv->remapped_bar[bar]) + return -ENOMEM; + + port->iotype = UPIO_MEM; + port->mapbase = base + offset; + port->membase = priv->remapped_bar[bar] + offset; + port->regshift = regshift; + } else { + base = pci_resource_start(dev, bar) + offset; + port->iotype = UPIO_PORT; + port->iobase = base; + } + return 0; +} + +/* + * AFAVLAB uses a different mixture of BARs and offsets + * Not that ugly ;) -- HW + */ +static int +afavlab_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = FL_GET_BASE(board->flags); + if (idx < 4) + bar += idx; + else { + bar = 4; + offset += (idx - 4) * board->uart_offset; + } + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +/* + * HP's Remote Management Console. The Diva chip came in several + * different versions. N-class, L2000 and A500 have two Diva chips, each + * with 3 UARTs (the third UART on the second chip is unused). Superdome + * and Keystone have one Diva chip with 3 UARTs. Some later machines have + * one Diva chip, but it has been expanded to 5 UARTs. + */ +static int __devinit pci_hp_diva_init(struct pci_dev *dev) +{ + int rc = 0; + + switch (dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_TOSCA1: + case PCI_DEVICE_ID_HP_DIVA_HALFDOME: + case PCI_DEVICE_ID_HP_DIVA_KEYSTONE: + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + rc = 3; + break; + case PCI_DEVICE_ID_HP_DIVA_TOSCA2: + rc = 2; + break; + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + rc = 4; + break; + case PCI_DEVICE_ID_HP_DIVA_POWERBAR: + rc = 1; + break; + } + + return rc; +} + +/* + * HP's Diva chip puts the 4th/5th serial port further out, and + * some serial ports are supposed to be hidden on certain models. + */ +static int +pci_hp_diva_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int offset = board->first_offset; + unsigned int bar = FL_GET_BASE(board->flags); + + switch (dev->subsystem_device) { + case PCI_DEVICE_ID_HP_DIVA_MAESTRO: + if (idx == 3) + idx++; + break; + case PCI_DEVICE_ID_HP_DIVA_EVEREST: + if (idx > 0) + idx++; + if (idx > 2) + idx++; + break; + } + if (idx > 2) + offset = 0x18; + + offset += idx * board->uart_offset; + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +/* + * Added for EKF Intel i960 serial boards + */ +static int __devinit pci_inteli960ni_init(struct pci_dev *dev) +{ + unsigned long oldval; + + if (!(dev->subsystem_device & 0x1000)) + return -ENODEV; + + /* is firmware started? */ + pci_read_config_dword(dev, 0x44, (void*) &oldval); + if (oldval == 0x00001000L) { /* RESET value */ + printk(KERN_DEBUG "Local i960 firmware missing"); + return -ENODEV; + } + return 0; +} + +/* + * Some PCI serial cards using the PLX 9050 PCI interface chip require + * that the card interrupt be explicitly enabled or disabled. This + * seems to be mainly needed on card using the PLX which also use I/O + * mapped memory. + */ +static int __devinit pci_plx9050_init(struct pci_dev *dev) +{ + u8 irq_config; + void __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) { + moan_device("no memory in bar 0", dev); + return 0; + } + + irq_config = 0x41; + if (dev->vendor == PCI_VENDOR_ID_PANACOM) + irq_config = 0x43; + if ((dev->vendor == PCI_VENDOR_ID_PLX) && + (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) { + /* + * As the megawolf cards have the int pins active + * high, and have 2 UART chips, both ints must be + * enabled on the 9050. Also, the UARTS are set in + * 16450 mode by default, so we have to enable the + * 16C950 'enhanced' mode so that we can use the + * deep FIFOs + */ + irq_config = 0x5b; + } + + /* + * enable/disable interrupts + */ + p = ioremap(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + writel(irq_config, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + + return 0; +} + +static void __devexit pci_plx9050_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) + return; + + /* + * disable interrupts + */ + p = ioremap(pci_resource_start(dev, 0), 0x80); + if (p != NULL) { + writel(0, p + 0x4c); + + /* + * Read the register back to ensure that it took effect. + */ + readl(p + 0x4c); + iounmap(p); + } +} + +/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */ +static int +sbs_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + bar = 0; + + if (idx < 4) { + /* first four channels map to 0, 0x100, 0x200, 0x300 */ + offset += idx * board->uart_offset; + } else if (idx < 8) { + /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */ + offset += idx * board->uart_offset + 0xC00; + } else /* we have only 8 ports on PMC-OCTALPRO */ + return 1; + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +/* +* This does initialization for PMC OCTALPRO cards: +* maps the device memory, resets the UARTs (needed, bc +* if the module is removed and inserted again, the card +* is in the sleep mode) and enables global interrupt. +*/ + +/* global control register offset for SBS PMC-OctalPro */ +#define OCT_REG_CR_OFF 0x500 + +static int __devinit sbs_init(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); + + if (p == NULL) + return -ENOMEM; + /* Set bit-4 Control Register (UART RESET) in to reset the uarts */ + writeb(0x10,p + OCT_REG_CR_OFF); + udelay(50); + writeb(0x0,p + OCT_REG_CR_OFF); + + /* Set bit-2 (INTENABLE) of Control Register */ + writeb(0x4, p + OCT_REG_CR_OFF); + iounmap(p); + + return 0; +} + +/* + * Disables the global interrupt of PMC-OctalPro + */ + +static void __devexit sbs_exit(struct pci_dev *dev) +{ + u8 __iomem *p; + + p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0)); + if (p != NULL) { + writeb(0, p + OCT_REG_CR_OFF); + } + iounmap(p); +} + +/* + * SIIG serial cards have an PCI interface chip which also controls + * the UART clocking frequency. Each UART can be clocked independently + * (except cards equiped with 4 UARTs) and initial clocking settings + * are stored in the EEPROM chip. It can cause problems because this + * version of serial driver doesn't support differently clocked UART's + * on single PCI card. To prevent this, initialization functions set + * high frequency clocking for all UART's on given card. It is safe (I + * hope) because it doesn't touch EEPROM settings to prevent conflicts + * with other OSes (like M$ DOS). + * + * SIIG support added by Andrey Panin , 10/1999 + * + * There is two family of SIIG serial cards with different PCI + * interface chip and different configuration methods: + * - 10x cards have control registers in IO and/or memory space; + * - 20x cards have control registers in standard PCI configuration space. + * + * Note: some SIIG cards are probed by the parport_serial object. + */ + +#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8) + +static int pci_siig10x_init(struct pci_dev *dev) +{ + u16 data; + void __iomem *p; + + switch (dev->device & 0xfff8) { + case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */ + data = 0xffdf; + break; + case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */ + data = 0xf7ff; + break; + default: /* 1S1P, 4S */ + data = 0xfffb; + break; + } + + p = ioremap(pci_resource_start(dev, 0), 0x80); + if (p == NULL) + return -ENOMEM; + + writew(readw(p + 0x28) & data, p + 0x28); + readw(p + 0x28); + iounmap(p); + return 0; +} + +#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc) +#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc) + +static int pci_siig20x_init(struct pci_dev *dev) +{ + u8 data; + + /* Change clock frequency for the first UART. */ + pci_read_config_byte(dev, 0x6f, &data); + pci_write_config_byte(dev, 0x6f, data & 0xef); + + /* If this card has 2 UART, we have to do the same with second UART. */ + if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) || + ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) { + pci_read_config_byte(dev, 0x73, &data); + pci_write_config_byte(dev, 0x73, data & 0xef); + } + return 0; +} + +int pci_siig10x_fn(struct pci_dev *dev, int enable) +{ + int ret = 0; + if (enable) + ret = pci_siig10x_init(dev); + return ret; +} + +int pci_siig20x_fn(struct pci_dev *dev, int enable) +{ + int ret = 0; + if (enable) + ret = pci_siig20x_init(dev); + return ret; +} + +EXPORT_SYMBOL(pci_siig10x_fn); +EXPORT_SYMBOL(pci_siig20x_fn); + +/* + * Timedia has an explosion of boards, and to avoid the PCI table from + * growing *huge*, we use this function to collapse some 70 entries + * in the PCI table into one, for sanity's and compactness's sake. + */ +static unsigned short timedia_single_port[] = { + 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0 +}; + +static unsigned short timedia_dual_port[] = { + 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085, + 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079, + 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079, + 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079, + 0xD079, 0 +}; + +static unsigned short timedia_quad_port[] = { + 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157, + 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159, + 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056, + 0xB157, 0 +}; + +static unsigned short timedia_eight_port[] = { + 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166, + 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0 +}; + +static struct timedia_struct { + int num; + unsigned short *ids; +} timedia_data[] = { + { 1, timedia_single_port }, + { 2, timedia_dual_port }, + { 4, timedia_quad_port }, + { 8, timedia_eight_port }, + { 0, NULL } +}; + +static int __devinit pci_timedia_init(struct pci_dev *dev) +{ + unsigned short *ids; + int i, j; + + for (i = 0; timedia_data[i].num; i++) { + ids = timedia_data[i].ids; + for (j = 0; ids[j]; j++) + if (dev->subsystem_device == ids[j]) + return timedia_data[i].num; + } + return 0; +} + +/* + * Timedia/SUNIX uses a mixture of BARs and offsets + * Ugh, this is ugly as all hell --- TYT + */ +static int +pci_timedia_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar = 0, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 0; + break; + case 1: + offset = board->uart_offset; + bar = 0; + break; + case 2: + bar = 1; + break; + case 3: + offset = board->uart_offset; + bar = 1; + case 4: /* BAR 2 */ + case 5: /* BAR 3 */ + case 6: /* BAR 4 */ + case 7: /* BAR 5 */ + bar = idx - 2; + } + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +/* + * Some Titan cards are also a little weird + */ +static int +titan_400l_800l_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset; + + switch (idx) { + case 0: + bar = 1; + break; + case 1: + bar = 2; + break; + default: + bar = 4; + offset = (idx - 2) * board->uart_offset; + } + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +static int __devinit pci_xircom_init(struct pci_dev *dev) +{ + msleep(100); + return 0; +} + +static int __devinit pci_netmos_init(struct pci_dev *dev) +{ + /* subdevice 0x00PS means

parallel, serial */ + unsigned int num_serial = dev->subsystem_device & 0xf; + + if (num_serial == 0) + return -ENODEV; + return num_serial; +} + +static int +pci_default_setup(struct pci_dev *dev, struct pci_board *board, + struct uart_port *port, int idx) +{ + unsigned int bar, offset = board->first_offset, maxnr; + + bar = FL_GET_BASE(board->flags); + if (board->flags & FL_BASE_BARS) + bar += idx; + else + offset += idx * board->uart_offset; + + maxnr = (pci_resource_len(dev, bar) - board->first_offset) / + (8 << board->reg_shift); + + if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr) + return 1; + + return setup_port(dev, port, bar, offset, board->reg_shift); +} + +/* This should be in linux/pci_ids.h */ +#define PCI_VENDOR_ID_SBSMODULARIO 0x124B +#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B +#define PCI_DEVICE_ID_OCTPRO 0x0001 +#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108 +#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 +#define PCI_SUBDEVICE_ID_POCTAL232 0x0308 +#define PCI_SUBDEVICE_ID_POCTAL422 0x0408 + +/* + * Master list of serial port init/setup/exit quirks. + * This does not describe the general nature of the port. + * (ie, baud base, number and location of ports, etc) + * + * This list is ordered alphabetically by vendor then device. + * Specific entries must come before more generic entries. + */ +static struct pci_serial_quirk pci_serial_quirks[] = { + /* + * AFAVLAB cards. + * It is not clear whether this applies to all products. + */ + { + .vendor = PCI_VENDOR_ID_AFAVLAB, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = afavlab_setup, + }, + /* + * HP Diva + */ + { + .vendor = PCI_VENDOR_ID_HP, + .device = PCI_DEVICE_ID_HP_DIVA, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_hp_diva_init, + .setup = pci_hp_diva_setup, + }, + /* + * Intel + */ + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_80960_RP, + .subvendor = 0xe4bf, + .subdevice = PCI_ANY_ID, + .init = pci_inteli960ni_init, + .setup = pci_default_setup, + }, + /* + * Panacom + */ + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_QUADMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PANACOM, + .device = PCI_DEVICE_ID_PANACOM_DUALMODEM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + /* + * PLX + */ + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, + .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_ROMULUS, + .subvendor = PCI_VENDOR_ID_PLX, + .subdevice = PCI_DEVICE_ID_PLX_ROMULUS, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO232, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., PMC-OCTALPRO 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_OCTPRO422, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., P-Octal 232 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL232, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + /* + * SBS Technologies, Inc., P-Octal 422 + */ + { + .vendor = PCI_VENDOR_ID_SBSMODULARIO, + .device = PCI_DEVICE_ID_OCTPRO, + .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO, + .subdevice = PCI_SUBDEVICE_ID_POCTAL422, + .init = sbs_init, + .setup = sbs_setup, + .exit = __devexit_p(sbs_exit), + }, + + /* + * SIIG cards. + * It is not clear whether these could be collapsed. + */ + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_10x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_10x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_10x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_10x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_10x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_10x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_10x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_10x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_10x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig10x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_20x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_20x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_1S_20x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_20x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_20x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_2S_20x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_20x_550, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_20x_650, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + { + .vendor = PCI_VENDOR_ID_SIIG, + .device = PCI_DEVICE_ID_SIIG_4S_20x_850, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_siig20x_init, + .setup = pci_default_setup, + }, + /* + * Titan cards + */ + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_400L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + { + .vendor = PCI_VENDOR_ID_TITAN, + .device = PCI_DEVICE_ID_TITAN_800L, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = titan_400l_800l_setup, + }, + /* + * Timedia cards + */ + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_DEVICE_ID_TIMEDIA_1889, + .subvendor = PCI_VENDOR_ID_TIMEDIA, + .subdevice = PCI_ANY_ID, + .init = pci_timedia_init, + .setup = pci_timedia_setup, + }, + { + .vendor = PCI_VENDOR_ID_TIMEDIA, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_timedia_setup, + }, + /* + * Xircom cards + */ + { + .vendor = PCI_VENDOR_ID_XIRCOM, + .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_xircom_init, + .setup = pci_default_setup, + }, + /* + * Netmos cards + */ + { + .vendor = PCI_VENDOR_ID_NETMOS, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_netmos_init, + .setup = pci_default_setup, + }, + /* + * Default "match everything" terminator entry + */ + { + .vendor = PCI_ANY_ID, + .device = PCI_ANY_ID, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + } +}; + +static inline int quirk_id_matches(u32 quirk_id, u32 dev_id) +{ + return quirk_id == PCI_ANY_ID || quirk_id == dev_id; +} + +static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) +{ + struct pci_serial_quirk *quirk; + + for (quirk = pci_serial_quirks; ; quirk++) + if (quirk_id_matches(quirk->vendor, dev->vendor) && + quirk_id_matches(quirk->device, dev->device) && + quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) && + quirk_id_matches(quirk->subdevice, dev->subsystem_device)) + break; + return quirk; +} + +static _INLINE_ int +get_pci_irq(struct pci_dev *dev, struct pci_board *board, int idx) +{ + if (board->flags & FL_NOIRQ) + return 0; + else + return dev->irq; +} + +/* + * This is the configuration table for all of the PCI serial boards + * which we support. It is directly indexed by the pci_board_num_t enum + * value, which is encoded in the pci_device_id PCI probe table's + * driver_data member. + * + * The makeup of these names are: + * pbn_bn{_bt}_n_baud + * + * bn = PCI BAR number + * bt = Index using PCI BARs + * n = number of serial ports + * baud = baud rate + * + * Please note: in theory if n = 1, _bt infix should make no difference. + * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200 + */ +enum pci_board_num_t { + pbn_default = 0, + + pbn_b0_1_115200, + pbn_b0_2_115200, + pbn_b0_4_115200, + pbn_b0_5_115200, + + pbn_b0_1_921600, + pbn_b0_2_921600, + pbn_b0_4_921600, + + pbn_b0_bt_1_115200, + pbn_b0_bt_2_115200, + pbn_b0_bt_8_115200, + + pbn_b0_bt_1_460800, + pbn_b0_bt_2_460800, + pbn_b0_bt_4_460800, + + pbn_b0_bt_1_921600, + pbn_b0_bt_2_921600, + pbn_b0_bt_4_921600, + pbn_b0_bt_8_921600, + + pbn_b1_1_115200, + pbn_b1_2_115200, + pbn_b1_4_115200, + pbn_b1_8_115200, + + pbn_b1_1_921600, + pbn_b1_2_921600, + pbn_b1_4_921600, + pbn_b1_8_921600, + + pbn_b1_bt_2_921600, + + pbn_b1_1_1382400, + pbn_b1_2_1382400, + pbn_b1_4_1382400, + pbn_b1_8_1382400, + + pbn_b2_1_115200, + pbn_b2_8_115200, + + pbn_b2_1_460800, + pbn_b2_4_460800, + pbn_b2_8_460800, + pbn_b2_16_460800, + + pbn_b2_1_921600, + pbn_b2_4_921600, + pbn_b2_8_921600, + + pbn_b2_bt_1_115200, + pbn_b2_bt_2_115200, + pbn_b2_bt_4_115200, + + pbn_b2_bt_2_921600, + pbn_b2_bt_4_921600, + + pbn_b3_4_115200, + pbn_b3_8_115200, + + /* + * Board-specific versions. + */ + pbn_panacom, + pbn_panacom2, + pbn_panacom4, + pbn_plx_romulus, + pbn_oxsemi, + pbn_intel_i960, + pbn_sgi_ioc3, + pbn_nec_nile4, + pbn_computone_4, + pbn_computone_6, + pbn_computone_8, + pbn_sbsxrsio, + pbn_exar_XR17C152, + pbn_exar_XR17C154, + pbn_exar_XR17C158, +}; + +/* + * uart_offset - the space between channels + * reg_shift - describes how the UART registers are mapped + * to PCI memory by the card. + * For example IER register on SBS, Inc. PMC-OctPro is located at + * offset 0x10 from the UART base, while UART_IER is defined as 1 + * in include/linux/serial_reg.h, + * see first lines of serial_in() and serial_out() in 8250.c +*/ + +static struct pci_board pci_boards[] __devinitdata = { + [pbn_default] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_1_115200] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_2_115200] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_4_115200] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_5_115200] = { + .flags = FL_BASE0, + .num_ports = 5, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b0_1_921600] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_2_921600] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_4_921600] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_2_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b0_bt_8_115200] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_2_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b0_bt_4_460800] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b0_bt_1_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_2_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_4_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b0_bt_8_921600] = { + .flags = FL_BASE0|FL_BASE_BARS, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_115200] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_2_115200] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_4_115200] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b1_8_115200] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b1_1_921600] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_2_921600] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_4_921600] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b1_8_921600] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_bt_2_921600] = { + .flags = FL_BASE1|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b1_1_1382400] = { + .flags = FL_BASE1, + .num_ports = 1, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_2_1382400] = { + .flags = FL_BASE1, + .num_ports = 2, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_4_1382400] = { + .flags = FL_BASE1, + .num_ports = 4, + .base_baud = 1382400, + .uart_offset = 8, + }, + [pbn_b1_8_1382400] = { + .flags = FL_BASE1, + .num_ports = 8, + .base_baud = 1382400, + .uart_offset = 8, + }, + + [pbn_b2_1_115200] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_8_115200] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_1_460800] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_4_460800] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_8_460800] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 8, + }, + [pbn_b2_16_460800] = { + .flags = FL_BASE2, + .num_ports = 16, + .base_baud = 460800, + .uart_offset = 8, + }, + + [pbn_b2_1_921600] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_4_921600] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_8_921600] = { + .flags = FL_BASE2, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b2_bt_1_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_2_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b2_bt_4_115200] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + + [pbn_b2_bt_2_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 8, + }, + [pbn_b2_bt_4_921600] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, + + [pbn_b3_4_115200] = { + .flags = FL_BASE3, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [pbn_b3_8_115200] = { + .flags = FL_BASE3, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + }, + + /* + * Entries following this are board-specific. + */ + + /* + * Panacom - IOMEM + */ + [pbn_panacom] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom2] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + [pbn_panacom4] = { + .flags = FL_BASE2|FL_BASE_BARS, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x400, + .reg_shift = 7, + }, + + /* I think this entry is broken - the first_offset looks wrong --rmk */ + [pbn_plx_romulus] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x03, + }, + + /* + * This board uses the size of PCI Base region 0 to + * signal now many ports are available + */ + [pbn_oxsemi] = { + .flags = FL_BASE0|FL_REGION_SZ_CAP, + .num_ports = 32, + .base_baud = 115200, + .uart_offset = 8, + }, + + /* + * EKF addition for i960 Boards form EKF with serial port. + * Max 256 ports. + */ + [pbn_intel_i960] = { + .flags = FL_BASE0, + .num_ports = 32, + .base_baud = 921600, + .uart_offset = 8 << 2, + .reg_shift = 2, + .first_offset = 0x10000, + }, + [pbn_sgi_ioc3] = { + .flags = FL_BASE0|FL_NOIRQ, + .num_ports = 1, + .base_baud = 458333, + .uart_offset = 8, + .reg_shift = 0, + .first_offset = 0x20178, + }, + + /* + * NEC Vrc-5074 (Nile 4) builtin UART. + */ + [pbn_nec_nile4] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 520833, + .uart_offset = 8 << 3, + .reg_shift = 3, + .first_offset = 0x300, + }, + + /* + * Computone - uses IOMEM. + */ + [pbn_computone_4] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_6] = { + .flags = FL_BASE0, + .num_ports = 6, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_computone_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x40, + .reg_shift = 2, + .first_offset = 0x200, + }, + [pbn_sbsxrsio] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 460800, + .uart_offset = 256, + .reg_shift = 4, + }, + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + * Only basic 16550A support. + * XR17C15[24] are not tested, but they should work. + */ + [pbn_exar_XR17C152] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C154] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 0x200, + }, + [pbn_exar_XR17C158] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x200, + }, +}; + +/* + * Given a complete unknown PCI device, try to use some heuristics to + * guess what the configuration might be, based on the pitiful PCI + * serial specs. Returns 0 on success, 1 on failure. + */ +static int __devinit +serial_pci_guess_board(struct pci_dev *dev, struct pci_board *board) +{ + int num_iomem, num_port, first_port = -1, i; + + /* + * If it is not a communications device or the programming + * interface is greater than 6, give up. + * + * (Should we try to make guesses for multiport serial devices + * later?) + */ + if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || + (dev->class & 0xff) > 6) + return -ENODEV; + + num_iomem = num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + num_port++; + if (first_port == -1) + first_port = i; + } + if (pci_resource_flags(dev, i) & IORESOURCE_MEM) + num_iomem++; + } + + /* + * If there is 1 or 0 iomem regions, and exactly one port, + * use it. We guess the number of ports based on the IO + * region size. + */ + if (num_iomem <= 1 && num_port == 1) { + board->flags = first_port; + board->num_ports = pci_resource_len(dev, first_port) / 8; + return 0; + } + + /* + * Now guess if we've got a board which indexes by BARs. + * Each IO BAR should be 8 bytes, and they should follow + * consecutively. + */ + first_port = -1; + num_port = 0; + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO && + pci_resource_len(dev, i) == 8 && + (first_port == -1 || (first_port + num_port) == i)) { + num_port++; + if (first_port == -1) + first_port = i; + } + } + + if (num_port > 1) { + board->flags = first_port | FL_BASE_BARS; + board->num_ports = num_port; + return 0; + } + + return -ENODEV; +} + +static inline int +serial_pci_matches(struct pci_board *board, struct pci_board *guessed) +{ + return + board->num_ports == guessed->num_ports && + board->base_baud == guessed->base_baud && + board->uart_offset == guessed->uart_offset && + board->reg_shift == guessed->reg_shift && + board->first_offset == guessed->first_offset; +} + +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int __devinit +pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct serial_private *priv; + struct pci_board *board, tmp; + struct pci_serial_quirk *quirk; + int rc, nr_ports, i; + + if (ent->driver_data >= ARRAY_SIZE(pci_boards)) { + printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n", + ent->driver_data); + return -EINVAL; + } + + board = &pci_boards[ent->driver_data]; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + if (ent->driver_data == pbn_default) { + /* + * Use a copy of the pci_board entry for this; + * avoid changing entries in the table. + */ + memcpy(&tmp, board, sizeof(struct pci_board)); + board = &tmp; + + /* + * We matched one of our class entries. Try to + * determine the parameters of this board. + */ + rc = serial_pci_guess_board(dev, board); + if (rc) + goto disable; + } else { + /* + * We matched an explicit entry. If we are able to + * detect this boards settings with our heuristic, + * then we no longer need this entry. + */ + memcpy(&tmp, &pci_boards[pbn_default], sizeof(struct pci_board)); + rc = serial_pci_guess_board(dev, &tmp); + if (rc == 0 && serial_pci_matches(board, &tmp)) + moan_device("Redundant entry in serial pci_table.", + dev); + } + + nr_ports = board->num_ports; + + /* + * Find an init and setup quirks. + */ + quirk = find_quirk(dev); + + /* + * Run the new-style initialization function. + * The initialization function returns: + * <0 - error + * 0 - use board->num_ports + * >0 - number of ports + */ + if (quirk->init) { + rc = quirk->init(dev); + if (rc < 0) + goto disable; + if (rc) + nr_ports = rc; + } + + priv = kmalloc(sizeof(struct serial_private) + + sizeof(unsigned int) * nr_ports, + GFP_KERNEL); + if (!priv) { + rc = -ENOMEM; + goto deinit; + } + + memset(priv, 0, sizeof(struct serial_private) + + sizeof(unsigned int) * nr_ports); + + priv->quirk = quirk; + pci_set_drvdata(dev, priv); + + for (i = 0; i < nr_ports; i++) { + struct uart_port serial_port; + memset(&serial_port, 0, sizeof(struct uart_port)); + + serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | + UPF_SHARE_IRQ; + serial_port.uartclk = board->base_baud * 16; + serial_port.irq = get_pci_irq(dev, board, i); + serial_port.dev = &dev->dev; + if (quirk->setup(dev, board, &serial_port, i)) + break; +#ifdef SERIAL_DEBUG_PCI + printk("Setup PCI port: port %x, irq %d, type %d\n", + serial_port.iobase, serial_port.irq, serial_port.iotype); +#endif + + priv->line[i] = serial8250_register_port(&serial_port); + if (priv->line[i] < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]); + break; + } + } + + priv->nr = i; + + return 0; + + deinit: + if (quirk->exit) + quirk->exit(dev); + disable: + pci_disable_device(dev); + return rc; +} + +static void __devexit pciserial_remove_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_drvdata(dev, NULL); + + if (priv) { + struct pci_serial_quirk *quirk; + int i; + + for (i = 0; i < priv->nr; i++) + serial8250_unregister_port(priv->line[i]); + + for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { + if (priv->remapped_bar[i]) + iounmap(priv->remapped_bar[i]); + priv->remapped_bar[i] = NULL; + } + + /* + * Find the exit quirks. + */ + quirk = find_quirk(dev); + if (quirk->exit) + quirk->exit(dev); + + pci_disable_device(dev); + + kfree(priv); + } +} + +static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + if (priv) { + int i; + + for (i = 0; i < priv->nr; i++) + serial8250_suspend_port(priv->line[i]); + } + pci_save_state(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + return 0; +} + +static int pciserial_resume_one(struct pci_dev *dev) +{ + struct serial_private *priv = pci_get_drvdata(dev); + + pci_set_power_state(dev, PCI_D0); + pci_restore_state(dev); + + if (priv) { + int i; + + /* + * The device may have been disabled. Re-enable it. + */ + pci_enable_device(dev); + + /* + * Ensure that the board is correctly configured. + */ + if (priv->quirk->init) + priv->quirk->init(dev); + + for (i = 0; i < priv->nr; i++) + serial8250_resume_port(priv->line[i]); + } + return 0; +} + +static struct pci_device_id serial_pci_tbl[] = { + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, + pbn_b1_8_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0, + pbn_b1_4_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0, + pbn_b1_2_1382400 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0, + pbn_b1_4_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0, + pbn_b1_2_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0, + pbn_b1_8_921600 }, + { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351, + PCI_SUBVENDOR_ID_CONNECT_TECH, + PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0, + pbn_b1_4_921600 }, + + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_1_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_115200 }, + + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + /* + * VScom SPCOM800, from sl@s.pl + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_8_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_4_921600 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_KEYSPAN, + PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0, + pbn_panacom }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom4 }, + { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_panacom2 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0, + pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIFAST, + PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0, + pbn_b2_16_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0, + pbn_b2_4_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_CHASE_PCIRAS, + PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, + pbn_b2_8_460800 }, + /* + * Megawolf Romulus PCI Serial Card, from Mike Hudson + * (Exoray@isys.ca) + */ + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS, + 0x10b5, 0x106a, 0, 0, + pbn_plx_romulus }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_4_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_2_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_8_115200 }, + { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_115200 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + + /* + * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, + * from skokodyn@yahoo.com + */ + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0, + pbn_sbsxrsio }, + { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO, + PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0, + pbn_sbsxrsio }, + + /* + * Digitan DS560-558, from jimd@esoft.com + */ + { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_115200 }, + + /* + * Titan Electronic cards + * The 400L and 800L have a custom setup quirk. + */ + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_bt_2_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_921600 }, + + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_460800 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_921600 }, + + /* + * Computone devices submitted by Doug McNash dmcnash@computone.com + */ + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4, + 0, 0, pbn_computone_4 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8, + 0, 0, pbn_computone_8 }, + { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG, + PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6, + 0, 0, pbn_computone_6 }, + + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi }, + { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889, + PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_921600 }, + + /* + * AFAVLAB serial card, from Harald Welte + */ + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_8_115200 }, + + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_4_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_460800 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_1_460800 }, + + /* + * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * Dell Remote Access Card III - Tim_T_Murphy@Dell.com + */ + { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b1_1_1382400 }, + + /* + * RAStel 2 port modem, gerg@moreton.com.au + */ + { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_bt_2_115200 }, + + /* + * EKF addition for i960 Boards form EKF with serial port + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP, + 0xE4BF, PCI_ANY_ID, 0, 0, + pbn_intel_i960 }, + + /* + * Xircom Cardbus/Ethernet combos + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + /* + * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry) + */ + { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + + /* + * Untested PCI modems, sent in from various folks... + */ + + /* + * Elsa Model 56K PCI Modem, from Andreas Rath + */ + { PCI_VENDOR_ID_ROCKWELL, 0x1004, + 0x1048, 0x1500, 0, 0, + pbn_b1_1_115200 }, + + { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, + 0xFF00, 0, 0, 0, + pbn_sgi_ioc3 }, + + /* + * HP Diva card + */ + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0, + pbn_b1_1_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_5_115200 }, + { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b2_1_115200 }, + + /* + * NEC Vrc-5074 (Nile 4) builtin UART. + */ + { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_nec_nile4 }, + + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_4_115200 }, + { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b3_8_115200 }, + + /* + * Exar Corp. XR17C15[248] Dual/Quad/Octal UART + */ + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C152 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C154 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17C158 }, + + /* + * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke) + */ + { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_115200 }, + + /* + * These entries match devices with class COMMUNICATION_SERIAL, + * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL + */ + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_SERIAL << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MODEM << 8, + 0xffff00, pbn_default }, + { PCI_ANY_ID, PCI_ANY_ID, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, + 0xffff00, pbn_default }, + { 0, } +}; + +static struct pci_driver serial_pci_driver = { + .name = "serial", + .probe = pciserial_init_one, + .remove = __devexit_p(pciserial_remove_one), + .suspend = pciserial_suspend_one, + .resume = pciserial_resume_one, + .id_table = serial_pci_tbl, +}; + +static int __init serial8250_pci_init(void) +{ + return pci_register_driver(&serial_pci_driver); +} + +static void __exit serial8250_pci_exit(void) +{ + pci_unregister_driver(&serial_pci_driver); +} + +module_init(serial8250_pci_init); +module_exit(serial8250_pci_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); +MODULE_DEVICE_TABLE(pci, serial_pci_tbl); diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c new file mode 100644 index 000000000000..18c58fb73899 --- /dev/null +++ b/drivers/serial/8250_pnp.c @@ -0,0 +1,457 @@ +/* + * linux/drivers/char/8250_pnp.c + * + * Probe module for 8250/16550-type ISAPNP serial ports. + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + * + * Ported to the Linux PnP Layer - (C) Adam Belay. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * $Id: 8250_pnp.c,v 1.10 2002/07/21 21:32:30 rmk Exp $ + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "8250.h" + +#define UNKNOWN_DEV 0x3000 + + +static const struct pnp_device_id pnp_dev_table[] = { + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "AAC000F", 0 }, + /* Anchor Datacomm BV */ + /* SXPro 144 External Data Fax Modem Plug & Play */ + { "ADC0001", 0 }, + /* SXPro 288 External Data Fax Modem Plug & Play */ + { "ADC0002", 0 }, + /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */ + { "AEI0250", 0 }, + /* Actiontec ISA PNP 56K X2 Fax Modem */ + { "AEI1240", 0 }, + /* Rockwell 56K ACF II Fax+Data+Voice Modem */ + { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ }, + /* AZT3005 PnP SOUND DEVICE */ + { "AZT4001", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Boca Research */ + /* Boca Complete Ofc Communicator 14.4 Data-FAX */ + { "BRI0A49", 0 }, + /* Boca Research 33,600 ACF Modem */ + { "BRI1400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI3400", 0 }, + /* Boca 33.6 Kbps Internal FD34FSVD */ + { "BRI0A49", 0 }, + /* Best Data Products Inc. Smart One 336F PnP Modem */ + { "BDP3336", 0 }, + /* Computer Peripherals Inc */ + /* EuroViVa CommCenter-33.6 SP PnP */ + { "CPI4050", 0 }, + /* Creative Labs */ + /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */ + { "CTL3001", 0 }, + /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */ + { "CTL3011", 0 }, + /* Creative */ + /* Creative Modem Blaster Flash56 DI5601-1 */ + { "DMB1032", 0 }, + /* Creative Modem Blaster V.90 DI5660 */ + { "DMB2001", 0 }, + /* E-Tech */ + /* E-Tech CyberBULLET PC56RVP */ + { "ETT0002", 0 }, + /* FUJITSU */ + /* Fujitsu 33600 PnP-I2 R Plug & Play */ + { "FUJ0202", 0 }, + /* Fujitsu FMV-FX431 Plug & Play */ + { "FUJ0205", 0 }, + /* Fujitsu 33600 PnP-I4 R Plug & Play */ + { "FUJ0206", 0 }, + /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */ + { "FUJ0209", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "GVC000F", 0 }, + /* Hayes */ + /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */ + { "HAY0001", 0 }, + /* Hayes Optima 336 V.34 + FAX + Voice PnP */ + { "HAY000C", 0 }, + /* Hayes Optima 336B V.34 + FAX + Voice PnP */ + { "HAY000D", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5670", 0 }, + /* Hayes Accura 56K Ext Fax Modem PnP */ + { "HAY5674", 0 }, + /* Hayes Accura 56K Fax Modem PnP */ + { "HAY5675", 0 }, + /* Hayes 288, V.34 + FAX */ + { "HAYF000", 0 }, + /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */ + { "HAYF001", 0 }, + /* IBM */ + /* IBM Thinkpad 701 Internal Modem Voice */ + { "IBM0033", 0 }, + /* Intertex */ + /* Intertex 28k8 33k6 Voice EXT PnP */ + { "IXDC801", 0 }, + /* Intertex 33k6 56k Voice EXT PnP */ + { "IXDC901", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDD801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDD901", 0 }, + /* Intertex 28k8 33k6 Voice SP INT PnP */ + { "IXDF401", 0 }, + /* Intertex 28k8 33k6 Voice SP EXT PnP */ + { "IXDF801", 0 }, + /* Intertex 33k6 56k Voice SP EXT PnP */ + { "IXDF901", 0 }, + /* Kortex International */ + /* KORTEX 28800 Externe PnP */ + { "KOR4522", 0 }, + /* KXPro 33.6 Vocal ASVD PnP */ + { "KORF661", 0 }, + /* Lasat */ + /* LASAT Internet 33600 PnP */ + { "LAS4040", 0 }, + /* Lasat Safire 560 PnP */ + { "LAS4540", 0 }, + /* Lasat Safire 336 PnP */ + { "LAS5440", 0 }, + /* Microcom, Inc. */ + /* Microcom TravelPorte FAST V.34 Plug & Play */ + { "MNP0281", 0 }, + /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */ + { "MNP0336", 0 }, + /* Microcom DeskPorte FAST EP 28.8 Plug & Play */ + { "MNP0339", 0 }, + /* Microcom DeskPorte 28.8P Plug & Play */ + { "MNP0342", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0500", 0 }, + /* Microcom DeskPorte FAST ES 28.8 Plug & Play */ + { "MNP0501", 0 }, + /* Microcom DeskPorte 28.8S Internal Plug & Play */ + { "MNP0502", 0 }, + /* Motorola */ + /* Motorola BitSURFR Plug & Play */ + { "MOT1105", 0 }, + /* Motorola TA210 Plug & Play */ + { "MOT1111", 0 }, + /* Motorola HMTA 200 (ISDN) Plug & Play */ + { "MOT1114", 0 }, + /* Motorola BitSURFR Plug & Play */ + { "MOT1115", 0 }, + /* Motorola Lifestyle 28.8 Internal */ + { "MOT1190", 0 }, + /* Motorola V.3400 Plug & Play */ + { "MOT1501", 0 }, + /* Motorola Lifestyle 28.8 V.34 Plug & Play */ + { "MOT1502", 0 }, + /* Motorola Power 28.8 V.34 Plug & Play */ + { "MOT1505", 0 }, + /* Motorola ModemSURFR External 28.8 Plug & Play */ + { "MOT1509", 0 }, + /* Motorola Premier 33.6 Desktop Plug & Play */ + { "MOT150A", 0 }, + /* Motorola VoiceSURFR 56K External PnP */ + { "MOT150F", 0 }, + /* Motorola ModemSURFR 56K External PnP */ + { "MOT1510", 0 }, + /* Motorola ModemSURFR 56K Internal PnP */ + { "MOT1550", 0 }, + /* Motorola ModemSURFR Internal 28.8 Plug & Play */ + { "MOT1560", 0 }, + /* Motorola Premier 33.6 Internal Plug & Play */ + { "MOT1580", 0 }, + /* Motorola OnlineSURFR 28.8 Internal Plug & Play */ + { "MOT15B0", 0 }, + /* Motorola VoiceSURFR 56K Internal PnP */ + { "MOT15F0", 0 }, + /* Com 1 */ + /* Deskline K56 Phone System PnP */ + { "MVX00A1", 0 }, + /* PC Rider K56 Phone System PnP */ + { "MVX00F2", 0 }, + /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */ + { "nEC8241", 0 }, + /* Pace 56 Voice Internal Plug & Play Modem */ + { "PMC2430", 0 }, + /* Generic */ + /* Generic standard PC COM port */ + { "PNP0500", 0 }, + /* Generic 16550A-compatible COM port */ + { "PNP0501", 0 }, + /* Compaq 14400 Modem */ + { "PNPC000", 0 }, + /* Compaq 2400/9600 Modem */ + { "PNPC001", 0 }, + /* Dial-Up Networking Serial Cable between 2 PCs */ + { "PNPC031", 0 }, + /* Dial-Up Networking Parallel Cable between 2 PCs */ + { "PNPC032", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC100", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC101", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC102", 0 }, + /* Standard Modem*/ + { "PNPC103", 0 }, + /* Standard 9600 bps Modem*/ + { "PNPC104", 0 }, + /* Standard 14400 bps Modem*/ + { "PNPC105", 0 }, + /* Standard 28800 bps Modem*/ + { "PNPC106", 0 }, + /* Standard Modem */ + { "PNPC107", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC108", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC109", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10A", 0 }, + /* Standard Modem */ + { "PNPC10B", 0 }, + /* Standard 9600 bps Modem */ + { "PNPC10C", 0 }, + /* Standard 14400 bps Modem */ + { "PNPC10D", 0 }, + /* Standard 28800 bps Modem */ + { "PNPC10E", 0 }, + /* Standard Modem */ + { "PNPC10F", 0 }, + /* Standard PCMCIA Card Modem */ + { "PNP2000", 0 }, + /* Rockwell */ + /* Modular Technology */ + /* Rockwell 33.6 DPF Internal PnP */ + /* Modular Technology 33.6 Internal PnP */ + { "ROK0030", 0 }, + /* Kortex International */ + /* KORTEX 14400 Externe PnP */ + { "ROK0100", 0 }, + /* Rockwell 28.8 */ + { "ROK4120", 0 }, + /* Viking Components, Inc */ + /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */ + { "ROK4920", 0 }, + /* Rockwell */ + /* British Telecom */ + /* Modular Technology */ + /* Rockwell 33.6 DPF External PnP */ + /* BT Prologue 33.6 External PnP */ + /* Modular Technology 33.6 External PnP */ + { "RSS00A0", 0 }, + /* Viking 56K FAX INT */ + { "RSS0262", 0 }, + /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */ + { "RSS0250", 0 }, + /* SupraExpress 28.8 Data/Fax PnP modem */ + { "SUP1310", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1421", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1590", 0 }, + /* SupraExpress 33.6 Data/Fax PnP modem */ + { "SUP1760", 0 }, + /* Phoebe Micro */ + /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */ + { "TEX0011", 0 }, + /* Archtek America Corp. */ + /* Archtek SmartLink Modem 3334BT Plug & Play */ + { "UAC000F", 0 }, + /* 3Com Corp. */ + /* Gateway Telepath IIvi 33.6 */ + { "USR0000", 0 }, + /* U.S. Robotics Sporster 33.6K Fax INT PnP */ + { "USR0002", 0 }, + /* Sportster Vi 14.4 PnP FAX Voicemail */ + { "USR0004", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR0006", 0 }, + /* U.S. Robotics 33.6K Voice EXT PnP */ + { "USR0007", 0 }, + /* U.S. Robotics Courier V.Everything INT PnP */ + { "USR0009", 0 }, + /* U.S. Robotics 33.6K Voice INT PnP */ + { "USR2002", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR2070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR2080", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3031", 0 }, + /* U.S. Robotics 56K FAX INT */ + { "USR3050", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3070", 0 }, + /* U.S. Robotics 56K Voice EXT PnP */ + { "USR3080", 0 }, + /* U.S. Robotics 56K Voice INT PnP */ + { "USR3090", 0 }, + /* U.S. Robotics 56K Message */ + { "USR9100", 0 }, + /* U.S. Robotics 56K FAX EXT PnP*/ + { "USR9160", 0 }, + /* U.S. Robotics 56K FAX INT PnP*/ + { "USR9170", 0 }, + /* U.S. Robotics 56K Voice EXT PnP*/ + { "USR9180", 0 }, + /* U.S. Robotics 56K Voice INT PnP*/ + { "USR9190", 0 }, + /* Rockwell's (PORALiNK) 33600 INT PNP */ + { "WCI0003", 0 }, + /* Unkown PnP modems */ + { "PNPCXXX", UNKNOWN_DEV }, + /* More unkown PnP modems */ + { "PNPDXXX", UNKNOWN_DEV }, + { "", 0 } +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); + +static char *modem_names[] __devinitdata = { + "MODEM", "Modem", "modem", "FAX", "Fax", "fax", + "56K", "56k", "K56", "33.6", "28.8", "14.4", + "33,600", "28,800", "14,400", "33.600", "28.800", "14.400", + "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL +}; + +static int __devinit check_name(char *name) +{ + char **tmp; + + for (tmp = modem_names; *tmp; tmp++) + if (strstr(name, *tmp)) + return 1; + + return 0; +} + +static int __devinit check_resources(struct pnp_option *option) +{ + struct pnp_option *tmp; + if (!option) + return 0; + + for (tmp = option; tmp; tmp = tmp->next) { + struct pnp_port *port; + for (port = tmp->port; port; port = port->next) + if ((port->size == 8) && + ((port->min == 0x2f8) || + (port->min == 0x3f8) || + (port->min == 0x2e8) || + (port->min == 0x3e8))) + return 1; + } + + return 0; +} + +/* + * Given a complete unknown PnP device, try to use some heuristics to + * detect modems. Currently use such heuristic set: + * - dev->name or dev->bus->name must contain "modem" substring; + * - device must have only one IO region (8 byte long) with base address + * 0x2e8, 0x3e8, 0x2f8 or 0x3f8. + * + * Such detection looks very ugly, but can detect at least some of numerous + * PnP modems, alternatively we must hardcode all modems in pnp_devices[] + * table. + */ +static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags) +{ + if (!(check_name(pnp_dev_name(dev)) || (dev->card && check_name(dev->card->name)))) + return -ENODEV; + + if (check_resources(dev->independent)) + return 0; + + if (check_resources(dev->dependent)) + return 0; + + return -ENODEV; +} + +static int __devinit +serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id) +{ + struct uart_port port; + int ret, line, flags = dev_id->driver_data; + + if (flags & UNKNOWN_DEV) { + ret = serial_pnp_guess_board(dev, &flags); + if (ret < 0) + return ret; + } + + memset(&port, 0, sizeof(struct uart_port)); + port.irq = pnp_irq(dev,0); + port.iobase = pnp_port_start(dev, 0); + +#ifdef SERIAL_DEBUG_PNP + printk("Setup PNP port: port %x, irq %d, type %d\n", + port.iobase, port.irq, port.iotype); +#endif + + port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + port.uartclk = 1843200; + port.dev = &dev->dev; + + line = serial8250_register_port(&port); + + if (line >= 0) + pnp_set_drvdata(dev, (void *)((long)line + 1)); + return line >= 0 ? 0 : -ENODEV; + +} + +static void __devexit serial_pnp_remove(struct pnp_dev * dev) +{ + long line = (long)pnp_get_drvdata(dev); + if (line) + serial8250_unregister_port(line - 1); +} + +static struct pnp_driver serial_pnp_driver = { + .name = "serial", + .id_table = pnp_dev_table, + .probe = serial_pnp_probe, + .remove = __devexit_p(serial_pnp_remove), +}; + +static int __init serial8250_pnp_init(void) +{ + return pnp_register_driver(&serial_pnp_driver); +} + +static void __exit serial8250_pnp_exit(void) +{ + pnp_unregister_driver(&serial_pnp_driver); +} + +module_init(serial8250_pnp_init); +module_exit(serial8250_pnp_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic 8250/16x50 PnP serial driver"); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig new file mode 100644 index 000000000000..6e44b46c9e9d --- /dev/null +++ b/drivers/serial/Kconfig @@ -0,0 +1,846 @@ +# +# Serial device configuration +# +# $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $ +# + +menu "Serial drivers" + +# +# The new 8250/16550 serial drivers +config SERIAL_8250 + tristate "8250/16550 and compatible serial support" + depends on (BROKEN || !(SPARC64 || SPARC32)) + select SERIAL_CORE + ---help--- + This selects whether you want to include the driver for the standard + serial ports. The standard answer is Y. People who might say N + here are those that are setting up dedicated Ethernet WWW/FTP + servers, or users that have one of the various bus mice instead of a + serial mouse and don't intend to use their machine's standard serial + port for anything. (Note that the Cyclades and Stallion multi + serial port drivers do not need this driver built in for them to + work.) + + To compile this driver as a module, choose M here: the + module will be called serial. + [WARNING: Do not compile this driver as a module if you are using + non-standard serial ports, since the configuration information will + be lost when the driver is unloaded. This limitation may be lifted + in the future.] + + BTW1: If you have a mouseman serial mouse which is not recognized by + the X window system, try running gpm first. + + BTW2: If you intend to use a software modem (also called Winmodem) + under Linux, forget it. These modems are crippled and require + proprietary drivers which are only available under Windows. + + Most people will say Y or M here, so that they can use serial mice, + modems and similar devices connecting to the standard serial ports. + +config SERIAL_8250_CONSOLE + bool "Console on 8250/16550 and compatible serial port" + depends on SERIAL_8250=y + select SERIAL_CORE_CONSOLE + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (grub or lilo or loadlin) about how to pass options + to the kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + If unsure, say N. + +config SERIAL_8250_CS + tristate "8250/16550 PCMCIA device support" + depends on PCMCIA && SERIAL_8250 + ---help--- + Say Y here to enable support for 16-bit PCMCIA serial devices, + including serial port cards, modems, and the modem functions of + multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are + credit-card size devices often used with laptops.) + + To compile this driver as a module, choose M here: the + module will be called serial_cs. + + If unsure, say N. + +config SERIAL_8250_ACPI + bool "8250/16550 device discovery via ACPI namespace" + default y if IA64 + depends on ACPI_BUS && SERIAL_8250 + ---help--- + If you wish to enable serial port discovery via the ACPI + namespace, say Y here. If unsure, say N. + +config SERIAL_8250_NR_UARTS + int "Maximum number of non-legacy 8250/16550 serial ports" + depends on SERIAL_8250 + default "4" + ---help--- + Set this to the number of non-legacy serial ports you want + the driver to support. This includes any ports discovered + via ACPI or PCI enumeration and any ports that may be added + at run-time via hot-plug. + +config SERIAL_8250_EXTENDED + bool "Extended 8250/16550 serial driver options" + depends on SERIAL_8250 + help + If you wish to use any non-standard features of the standard "dumb" + driver, say Y here. This includes HUB6 support, shared serial + interrupts, special multiport support, support for more than the + four COM 1/2/3/4 boards, etc. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial driver options. If unsure, say N. + +config SERIAL_8250_MANY_PORTS + bool "Support more than 4 legacy serial ports" + depends on SERIAL_8250_EXTENDED && !IA64 + help + Say Y here if you have dumb serial boards other than the four + standard COM 1/2/3/4 ports. This may happen if you have an AST + FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available + from ), or other custom + serial port hardware which acts similar to standard serial port + hardware. If you only use the standard COM 1/2/3/4 ports, you can + say N here to save some memory. You can also say Y if you have an + "intelligent" multiport card such as Cyclades, Digiboards, etc. + +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_MULTIPORT + bool "Support special multiport boards" + depends on SERIAL_8250_EXTENDED + help + Some multiport serial ports have special ports which are used to + signal when there are any serial ports on the board which need + servicing. Say Y here to enable the serial driver to take advantage + of those special I/O ports. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + ::: To be written ::: + +comment "Non-8250 serial port support" + +config SERIAL_8250_ACORN + tristate "Acorn expansion card serial port support" + depends on ARM && ARCH_ACORN && SERIAL_8250 + help + If you have an Atomwide Serial card or Serial Port card for an Acorn + system, say Y to this option. The driver can handle 1, 2, or 3 port + cards. If unsure, say N. + +config SERIAL_AMBA_PL010 + tristate "ARM AMBA PL010 serial port support" + depends on ARM_AMBA + select SERIAL_CORE + help + This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have + an Integrator/AP or Integrator/PP2 platform, say Y or M here. + + If unsure, say N. + +config SERIAL_AMBA_PL010_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL010=y + select SERIAL_CORE_CONSOLE + ---help--- + Say Y here if you wish to use an AMBA PrimeCell UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyAM0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_AMBA_PL011 + tristate "ARM AMBA PL011 serial port support" + depends on ARM_AMBA + select SERIAL_CORE + help + This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have + an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M + here. + + If unsure, say N. + +config SERIAL_AMBA_PL011_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL011=y + select SERIAL_CORE_CONSOLE + ---help--- + Say Y here if you wish to use an AMBA PrimeCell UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyAM0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_CLPS711X + tristate "CLPS711X serial port support" + depends on ARM && ARCH_CLPS711X + select SERIAL_CORE + help + ::: To be written ::: + +config SERIAL_CLPS711X_CONSOLE + bool "Support for console on CLPS711X serial port" + depends on SERIAL_CLPS711X=y + select SERIAL_CORE_CONSOLE + help + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyCL1". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_S3C2410 + tristate "Samsung S3C2410 Serial port support" + depends on ARM && ARCH_S3C2410 + select SERIAL_CORE + help + Support for the on-chip UARTs on the Samsung S3C2410X CPU, + providing /dev/ttySAC0, 1 and 2 (note, some machines may not + provide all of these ports, depending on how the serial port + pins are configured. + +config SERIAL_S3C2410_CONSOLE + bool "Support for console on S3C2410 serial port" + depends on SERIAL_S3C2410=y + select SERIAL_CORE_CONSOLE + help + Allow selection of the S3C2410 on-board serial ports for use as + an virtual console. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySACx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) + +config SERIAL_BAST_SIO + bool "Support for BAST SuperIO serial ports" + depends on ARCH_BAST && SERIAL_8250=y + help + Support for registerin the SuperIO chip on BAST board with + the 8250/16550 uart code. + +config SERIAL_DZ + bool "DECstation DZ serial driver" + depends on MACH_DECSTATION && MIPS32 + select SERIAL_CORE + help + DZ11-family serial controllers for VAXstations, including the + DC7085, M7814, and M7819. + +config SERIAL_DZ_CONSOLE + bool "Support console on DECstation DZ serial driver" + depends on SERIAL_DZ=y + select SERIAL_CORE_CONSOLE + help + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). Note that the firmware uses ttyS0 as the serial console on + the Maxine and ttyS2 on the others. + + If unsure, say Y. + +config SERIAL_21285 + tristate "DC21285 serial port support" + depends on ARM && FOOTBRIDGE + select SERIAL_CORE + help + If you have a machine based on a 21285 (Footbridge) StrongARM(R)/ + PCI bridge you can enable its onboard serial port by enabling this + option. + +config SERIAL_21285_CONSOLE + bool "Console on DC21285 serial port" + depends on SERIAL_21285=y + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the 21285 footbridge you can + make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyFB". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_UART00 + bool "Excalibur serial port (uart00) support" + depends on ARM && ARCH_CAMELOT + select SERIAL_CORE + help + Say Y here if you want to use the hard logic uart on Excalibur. This + driver also supports soft logic implementations of this uart core. + +config SERIAL_UART00_CONSOLE + bool "Support for console on Excalibur serial port" + depends on SERIAL_UART00 + select SERIAL_CORE_CONSOLE + help + Say Y here if you want to support a serial console on an Excalibur + hard logic uart or uart00 IP core. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_MPSC + bool "Marvell MPSC serial port support" + depends on PPC32 && MV64X60 + select SERIAL_CORE + help + Say Y here if you want to use the Marvell MPSC serial controller. + +config SERIAL_MPSC_CONSOLE + bool "Support for console on Marvell MPSC serial port" + depends on SERIAL_MPSC + select SERIAL_CORE_CONSOLE + help + Say Y here if you want to support a serial console on a Marvell MPSC. + +config SERIAL_PXA + bool "PXA serial port support" + depends on ARM && ARCH_PXA + select SERIAL_CORE + help + If you have a machine based on an Intel XScale PXA2xx CPU you + can enable its onboard serial ports by enabling this option. + +config SERIAL_PXA_CONSOLE + bool "Console on PXA serial port" + depends on SERIAL_PXA + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Intel XScale PXA + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_SA1100 + bool "SA1100 serial port support" + depends on ARM && ARCH_SA1100 + select SERIAL_CORE + help + If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you + can enable its onboard serial port by enabling this option. + Please read for further + info. + +config SERIAL_SA1100_CONSOLE + bool "Console on SA1100 serial port" + depends on SERIAL_SA1100 + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the SA1100/SA1110 StrongARM + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_IMX + bool "IMX serial port support" + depends on ARM && ARCH_IMX + select SERIAL_CORE + help + If you have a machine based on a Motorola IMX CPU you + can enable its onboard serial port by enabling this option. + +config SERIAL_IMX_CONSOLE + bool "Console on IMX serial port" + depends on SERIAL_IMX + select SERIAL_CORE_CONSOLE + help + If you have enabled the serial port on the Motorola IMX + CPU you can make it the console by answering Y to this option. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySA0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_SUNCORE + bool + depends on SPARC32 || SPARC64 + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + default y + +config SERIAL_SUNZILOG + tristate "Sun Zilog8530 serial support" + depends on SPARC32 || SPARC64 + help + This driver supports the Zilog8530 serial ports found on many Sparc + systems. Say Y or M if you want to be able to these serial ports. + +config SERIAL_SUNZILOG_CONSOLE + bool "Console on Sun Zilog8530 serial port" + depends on SERIAL_SUNZILOG=y + help + If you would like to be able to use the Zilog8530 serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_SUNSU + tristate "Sun SU serial support" + depends on (SPARC32 || SPARC64) && PCI + help + This driver supports the 8250 serial ports that run the keyboard and + mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able + to these serial ports. + +config SERIAL_SUNSU_CONSOLE + bool "Console on Sun SU serial port" + depends on SERIAL_SUNSU=y + help + If you would like to be able to use the SU serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_MUX + tristate "Serial MUX support" + depends on PARISC + select SERIAL_CORE + default y + ---help--- + Saying Y here will enable the hardware MUX serial driver for + the Nova and K class systems. The hardware MUX is not 8250/16550 + compatible therefore the /dev/ttyB0 device is shared between the + Serial MUX and the PDC software console. The following steps + need to be completed to use the Serial MUX: + + 1. create the device entry (mknod /dev/ttyB0 c 11 0) + 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 + 3. Add device ttyB0 to /etc/securetty (if you want to log on as + root on this console.) + 4. Change the kernel command console parameter to: console=ttyB0 + +config SERIAL_MUX_CONSOLE + bool "Support for console on serial MUX" + depends on SERIAL_MUX + select SERIAL_CORE_CONSOLE + default y + +config PDC_CONSOLE + bool "PDC software console support" + depends on PARISC && !SERIAL_MUX && VT + default n + help + Saying Y here will enable the software based PDC console to be + used as the system console. This is useful for machines in + which the hardware based console has not been written yet. The + following steps must be competed to use the PDC console: + + 1. create the device entry (mknod /dev/ttyB0 c 11 0) + 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0 + 3. Add device ttyB0 to /etc/securetty (if you want to log on as + root on this console.) + 4. Change the kernel command console parameter to: console=ttyB0 + +config SERIAL_SUNSAB + tristate "Sun Siemens SAB82532 serial support" + depends on (SPARC32 || SPARC64) && PCI + help + This driver supports the Siemens SAB82532 DUSCC serial ports on newer + (PCI) UltraSPARC systems. Say Y or M if you want to be able to these + serial ports. + +config SERIAL_SUNSAB_CONSOLE + bool "Console on Sun Siemens SAB82532 serial port" + depends on SERIAL_SUNSAB=y + help + If you would like to be able to use the SAB82532 serial port + on your Sparc system as the console, you can do so by answering + Y to this option. + +config SERIAL_IP22_ZILOG + tristate "IP22 Zilog8530 serial support" + depends on SGI_IP22 + select SERIAL_CORE + help + This driver supports the Zilog8530 serial ports found on SGI IP22 + systems. Say Y or M if you want to be able to these serial ports. + +config SERIAL_IP22_ZILOG_CONSOLE + bool "Console on IP22 Zilog8530 serial port" + depends on SERIAL_IP22_ZILOG=y + select SERIAL_CORE_CONSOLE + +config V850E_UART + bool "NEC V850E on-chip UART support" + depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1 + select SERIAL_CORE + default y + +config V850E_UARTB + bool + depends V850E_UART && V850E_ME2 + default y + +config V850E_UART_CONSOLE + bool "Use NEC V850E on-chip UART for console" + depends on V850E_UART + select SERIAL_CORE_CONSOLE + +config SERIAL_SH_SCI + tristate "SH SCI(F) serial port support" + depends on SUPERH || H8300 + select SERIAL_CORE + +config SERIAL_SH_SCI_CONSOLE + bool "Support for console on SH SCI(F)" + depends on SERIAL_SH_SCI=y + select SERIAL_CORE_CONSOLE + +config SERIAL_AU1X00 + bool "Enable Au1x00 UART Support" + depends on MIPS && SOC_AU1X00 + select SERIAL_CORE + help + If you have an Alchemy AU1X00 processor (MIPS based) and you want + to use serial ports, say Y. Otherwise, say N. + +config SERIAL_AU1X00_CONSOLE + bool "Enable Au1x00 serial console" + depends on SERIAL_AU1X00 + select SERIAL_CORE_CONSOLE + help + If you have an Alchemy AU1X00 processor (MIPS based) and you want + to use a console on a serial port, say Y. Otherwise, say N. + +config SERIAL_CORE + tristate + +config SERIAL_CORE_CONSOLE + bool + +config SERIAL_68328 + bool "68328 serial support" + depends on M68328 || M68EZ328 || M68VZ328 + help + This driver supports the built-in serial port of the Motorola 68328 + (standard, EZ and VZ varities). + +config SERIAL_68328_RTS_CTS + bool "Support RTS/CTS on 68328 serial port" + depends on SERIAL_68328 + +config SERIAL_COLDFIRE + bool "ColdFire serial support" + depends on COLDFIRE + help + This driver supports the built-in serial ports of the Motorola ColdFire + family of CPUs. + +config SERIAL_68360_SMC + bool "68360 SMC uart support" + depends on M68360 + help + This driver supports the SMC serial ports of the Motorola 68360 CPU. + +config SERIAL_68360_SCC + bool "68360 SCC uart support" + depends on M68360 + help + This driver supports the SCC serial ports of the Motorola 68360 CPU. + +config SERIAL_68360 + bool + depends on SERIAL_68360_SMC || SERIAL_68360_SCC + default y + +config SERIAL_PMACZILOG + tristate "PowerMac z85c30 ESCC support" + depends on PPC_OF && PPC_PMAC + select SERIAL_CORE + help + This driver supports the Zilog z85C30 serial ports found on + PowerMac machines. + Say Y or M if you want to be able to these serial ports. + +config SERIAL_PMACZILOG_CONSOLE + bool "Console on PowerMac z85c30 serial port" + depends on SERIAL_PMACZILOG=y + select SERIAL_CORE_CONSOLE + help + If you would like to be able to use the z85c30 serial port + on your PowerMac as the console, you can do so by answering + Y to this option. + +config SERIAL_LH7A40X + tristate "Sharp LH7A40X embedded UART support" + depends on ARM && ARCH_LH7A40X + select SERIAL_CORE + help + This enables support for the three on-board UARTs of the + Sharp LH7A40X series CPUs. Choose Y or M. + +config SERIAL_LH7A40X_CONSOLE + bool "Support for console on Sharp LH7A40X serial port" + depends on SERIAL_LH7A40X=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use one of the serial ports as the + system console--the system console is the device which + receives all kernel messages and warnings and which allows + logins in single user mode. + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the default system console, but + you can alter that using a kernel command line, for example + "console=ttyAM1". + +config SERIAL_CPM + tristate "CPM SCC/SMC serial port support" + depends on CPM2 || 8xx + select SERIAL_CORE + help + This driver supports the SCC and SMC serial ports on Motorola + embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx) + +config SERIAL_CPM_CONSOLE + bool "Support for console on CPM SCC/SMC serial port" + depends on SERIAL_CPM=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use a SCC or SMC CPM UART as the system + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + + Even if you say Y here, the currently visible framebuffer console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyCPM0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + +config SERIAL_CPM_SCC1 + bool "Support for SCC1 serial port" + depends on SERIAL_CPM=y + help + Select the is option to use SCC1 as a serial port + +config SERIAL_CPM_SCC2 + bool "Support for SCC2 serial port" + depends on SERIAL_CPM=y + help + Select the is option to use SCC2 as a serial port + +config SERIAL_CPM_SCC3 + bool "Support for SCC3 serial port" + depends on SERIAL_CPM=y + help + Select the is option to use SCC3 as a serial port + +config SERIAL_CPM_SCC4 + bool "Support for SCC4 serial port" + depends on SERIAL_CPM=y + help + Select the is option to use SCC4 as a serial port + +config SERIAL_CPM_SMC1 + bool "Support for SMC1 serial port" + depends on SERIAL_CPM=y + help + Select the is option to use SMC1 as a serial port + +config SERIAL_CPM_SMC2 + bool "Support for SMC2 serial port" + depends on SERIAL_CPM=y + help + Select the is option to use SMC2 as a serial port + +config SERIAL_SGI_L1_CONSOLE + bool "SGI Altix L1 serial console support" + depends on IA64_GENERIC || IA64_SGI_SN2 + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + help + If you have an SGI Altix and you would like to use the system + controller serial port as your console (you want this!), + say Y. Otherwise, say N. + +config SERIAL_MPC52xx + tristate "Freescale MPC52xx family PSC serial support" + depends on PPC_MPC52xx + select SERIAL_CORE + help + This drivers support the MPC52xx PSC serial ports. If you would + like to use them, you must answer Y or M to this option. Not that + for use as console, it must be included in kernel and not as a + module. + +config SERIAL_MPC52xx_CONSOLE + bool "Console on a Freescale MPC52xx family PSC serial port" + depends on SERIAL_MPC52xx=y + select SERIAL_CORE_CONSOLE + help + Select this options if you'd like to use one of the PSC serial port + of the Freescale MPC52xx family as a console. + +config SERIAL_MPC52xx_CONSOLE_BAUD + int "Freescale MPC52xx family PSC serial port baud" + depends on SERIAL_MPC52xx_CONSOLE=y + default "9600" + help + Select the MPC52xx console baud rate. + This value is only used if the bootloader doesn't pass in the + console baudrate + +config SERIAL_ICOM + tristate "IBM Multiport Serial Adapter" + depends on PPC_ISERIES || PPC_PSERIES + select SERIAL_CORE + help + This driver is for a family of multiport serial adapters + including 2 port RVX, 2 port internal modem, 4 port internal + modem and a split 1 port RVX and 1 port internal modem. + + This driver can also be built as a module. If so, the module + will be called icom. + +config SERIAL_M32R_SIO + bool "M32R SIO I/F" + depends on M32R + default y + select SERIAL_CORE + help + Say Y here if you want to use the M32R serial controller. + +config SERIAL_M32R_SIO_CONSOLE + bool "use SIO console" + depends on SERIAL_M32R_SIO=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you want to support a serial console. + + If you use an M3T-M32700UT or an OPSPUT platform, + please say also y for SERIAL_M32R_PLDSIO. + +config SERIAL_M32R_PLDSIO + bool "M32R SIO I/F on a PLD" + depends on SERIAL_M32R_SIO=y + default n + help + Say Y here if you want to use the M32R serial controller + on a PLD (Programmable Logic Device). + + If you use an M3T-M32700UT or an OPSPUT platform, + please say Y. + +config SERIAL_TXX9 + bool "TMPTX39XX/49XX SIO support" + depends HAS_TXX9_SERIAL + select SERIAL_CORE + default y + +config HAS_TXX9_SERIAL + bool + +config SERIAL_TXX9_CONSOLE + bool "TMPTX39XX/49XX SIO Console support" + depends on SERIAL_TXX9=y + select SERIAL_CORE_CONSOLE + +config SERIAL_TXX9_STDSERIAL + bool "TX39XX/49XX SIO act as standard serial" + depends on !SERIAL_8250 && SERIAL_TXX9 + +config SERIAL_VR41XX + tristate "NEC VR4100 series Serial Interface Unit support" + depends on CPU_VR41XX + select SERIAL_CORE + help + If you have a NEC VR4100 series processor and you want to use + Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU) + (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N. + +config SERIAL_VR41XX_CONSOLE + bool "Enable NEC VR4100 series Serial Interface Unit console" + depends on SERIAL_VR41XX + select SERIAL_CORE_CONSOLE + help + If you have a NEC VR4100 series processor and you want to use + a console on a serial port, say Y. Otherwise, say N. + +config SERIAL_JSM + tristate "Digi International NEO PCI Support" + depends on PCI + select SERIAL_CORE + help + This is a driver for Digi International's Neo series + of cards which provide multiple serial ports. You would need + something like this to connect more than two modems to your Linux + box, for instance in order to become a dial-in server. This driver + supports PCI boards only. + If you have a card like this, say Y here and read the file + . + + To compile this driver as a module, choose M here: the + module will be called jsm. + +endmenu diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile new file mode 100644 index 000000000000..81b77d769b84 --- /dev/null +++ b/drivers/serial/Makefile @@ -0,0 +1,54 @@ +# +# Makefile for the kernel serial device drivers. +# +# $Id: Makefile,v 1.8 2002/07/21 21:32:30 rmk Exp $ +# + +serial-8250-y := +serial-8250-$(CONFIG_SERIAL_8250_ACPI) += 8250_acpi.o +serial-8250-$(CONFIG_PNP) += 8250_pnp.o +serial-8250-$(CONFIG_GSC) += 8250_gsc.o +serial-8250-$(CONFIG_PCI) += 8250_pci.o +serial-8250-$(CONFIG_HP300) += 8250_hp300.o + +obj-$(CONFIG_SERIAL_CORE) += serial_core.o +obj-$(CONFIG_SERIAL_21285) += 21285.o +obj-$(CONFIG_SERIAL_8250) += 8250.o $(serial-8250-y) +obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o +obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o +obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o +obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o +obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o +obj-$(CONFIG_SERIAL_PXA) += pxa.o +obj-$(CONFIG_SERIAL_SA1100) += sa1100.o +obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o +obj-$(CONFIG_SERIAL_UART00) += uart00.o +obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o +obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o +obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o +obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o +obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o +obj-$(CONFIG_SERIAL_MUX) += mux.o +obj-$(CONFIG_SERIAL_68328) += 68328serial.o +obj-$(CONFIG_SERIAL_68360) += 68360serial.o +obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o +obj-$(CONFIG_V850E_UART) += v850e_uart.o +obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o +obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o +obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o +obj-$(CONFIG_SERIAL_DZ) += dz.o +obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o +obj-$(CONFIG_SERIAL_BAST_SIO) += bast_sio.o +obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o +obj-$(CONFIG_SERIAL_CPM) += cpm_uart/ +obj-$(CONFIG_SERIAL_IMX) += imx.o +obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o +obj-$(CONFIG_SERIAL_ICOM) += icom.o +obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o +obj-$(CONFIG_SERIAL_MPSC) += mpsc.o +obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o +obj-$(CONFIG_SERIAL_JSM) += jsm/ +obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o +obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o +obj-$(CONFIG_BLK_DEV_SGIIOC4) += ioc4_serial.o diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c new file mode 100644 index 000000000000..ac57fdc8711b --- /dev/null +++ b/drivers/serial/amba-pl010.c @@ -0,0 +1,840 @@ +/* + * linux/drivers/char/amba.c + * + * Driver for AMBA serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $ + * + * This is a generic driver for ARM AMBA-type serial ports. They + * have a lot of 16550-like features, but are not register compatible. + * Note that although they do have CTS, DCD and DSR inputs, they do + * not have an RI input, nor do they have DTR or RTS outputs. If + * required, these have to be supplied via some other means (eg, GPIO) + * and hooked into this driver. + */ +#include + +#if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define UART_NR 2 + +#define SERIAL_AMBA_MAJOR 204 +#define SERIAL_AMBA_MINOR 16 +#define SERIAL_AMBA_NR UART_NR + +#define AMBA_ISR_PASS_LIMIT 256 + +/* + * Access macros for the AMBA UARTs + */ +#define UART_GET_INT_STATUS(p) readb((p)->membase + UART010_IIR) +#define UART_PUT_ICR(p, c) writel((c), (p)->membase + UART010_ICR) +#define UART_GET_FR(p) readb((p)->membase + UART01x_FR) +#define UART_GET_CHAR(p) readb((p)->membase + UART01x_DR) +#define UART_PUT_CHAR(p, c) writel((c), (p)->membase + UART01x_DR) +#define UART_GET_RSR(p) readb((p)->membase + UART01x_RSR) +#define UART_GET_CR(p) readb((p)->membase + UART010_CR) +#define UART_PUT_CR(p,c) writel((c), (p)->membase + UART010_CR) +#define UART_GET_LCRL(p) readb((p)->membase + UART010_LCRL) +#define UART_PUT_LCRL(p,c) writel((c), (p)->membase + UART010_LCRL) +#define UART_GET_LCRM(p) readb((p)->membase + UART010_LCRM) +#define UART_PUT_LCRM(p,c) writel((c), (p)->membase + UART010_LCRM) +#define UART_GET_LCRH(p) readb((p)->membase + UART010_LCRH) +#define UART_PUT_LCRH(p,c) writel((c), (p)->membase + UART010_LCRH) +#define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0) +#define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0) +#define UART_TX_EMPTY(p) ((UART_GET_FR(p) & UART01x_FR_TMSK) == 0) + +#define UART_DUMMY_RSR_RX /*256*/0 +#define UART_PORT_SIZE 64 + +/* + * On the Integrator platform, the port RTS and DTR are provided by + * bits in the following SC_CTRLS register bits: + * RTS DTR + * UART0 7 6 + * UART1 5 4 + */ +#define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET) +#define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET) + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_amba_port { + struct uart_port port; + unsigned int dtr_mask; + unsigned int rts_mask; + unsigned int old_status; +}; + +static void pl010_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + unsigned int cr; + + cr = UART_GET_CR(port); + cr &= ~UART010_CR_TIE; + UART_PUT_CR(port, cr); +} + +static void pl010_start_tx(struct uart_port *port, unsigned int tty_start) +{ + unsigned int cr; + + cr = UART_GET_CR(port); + cr |= UART010_CR_TIE; + UART_PUT_CR(port, cr); +} + +static void pl010_stop_rx(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CR(port); + cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); + UART_PUT_CR(port, cr); +} + +static void pl010_enable_ms(struct uart_port *port) +{ + unsigned int cr; + + cr = UART_GET_CR(port); + cr |= UART010_CR_MSIE; + UART_PUT_CR(port, cr); +} + +static void +#ifdef SUPPORT_SYSRQ +pl010_rx_chars(struct uart_port *port, struct pt_regs *regs) +#else +pl010_rx_chars(struct uart_port *port) +#endif +{ + struct tty_struct *tty = port->info->tty; + unsigned int status, ch, flag, rsr, max_count = 256; + + status = UART_GET_FR(port); + while (UART_RX_DATA(status) && max_count--) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + /* + * If this failed then we will throw away the + * bytes but must do so to clear interrupts. + */ + } + + ch = UART_GET_CHAR(port); + flag = TTY_NORMAL; + + port->icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + rsr = UART_GET_RSR(port) | UART_DUMMY_RSR_RX; + if (rsr & UART01x_RSR_ANY) { + if (rsr & UART01x_RSR_BE) { + rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } else if (rsr & UART01x_RSR_PE) + port->icount.parity++; + else if (rsr & UART01x_RSR_FE) + port->icount.frame++; + if (rsr & UART01x_RSR_OE) + port->icount.overrun++; + + rsr &= port->read_status_mask; + + if (rsr & UART01x_RSR_BE) + flag = TTY_BREAK; + else if (rsr & UART01x_RSR_PE) + flag = TTY_PARITY; + else if (rsr & UART01x_RSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch, regs)) + goto ignore_char; + + if ((rsr & port->ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if ((rsr & UART01x_RSR_OE) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + ignore_char: + status = UART_GET_FR(port); + } + tty_flip_buffer_push(tty); + return; +} + +static void pl010_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + int count; + + if (port->x_char) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + pl010_stop_tx(port, 0); + return; + } + + count = port->fifosize >> 1; + do { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + pl010_stop_tx(port, 0); +} + +static void pl010_modem_status(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status, delta; + + UART_PUT_ICR(&uap->port, 0); + + status = UART_GET_FR(&uap->port) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; + + if (!delta) + return; + + if (delta & UART01x_FR_DCD) + uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); + + if (delta & UART01x_FR_DSR) + uap->port.icount.dsr++; + + if (delta & UART01x_FR_CTS) + uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + + wake_up_interruptible(&uap->port.info->delta_msr_wait); +} + +static irqreturn_t pl010_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = dev_id; + unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; + int handled = 0; + + spin_lock(&port->lock); + + status = UART_GET_INT_STATUS(port); + if (status) { + do { + if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) +#ifdef SUPPORT_SYSRQ + pl010_rx_chars(port, regs); +#else + pl010_rx_chars(port); +#endif + if (status & UART010_IIR_MIS) + pl010_modem_status(port); + if (status & UART010_IIR_TIS) + pl010_tx_chars(port); + + if (pass_counter-- == 0) + break; + + status = UART_GET_INT_STATUS(port); + } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | + UART010_IIR_TIS)); + handled = 1; + } + + spin_unlock(&port->lock); + + return IRQ_RETVAL(handled); +} + +static unsigned int pl010_tx_empty(struct uart_port *port) +{ + return UART_GET_FR(port) & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; +} + +static unsigned int pl010_get_mctrl(struct uart_port *port) +{ + unsigned int result = 0; + unsigned int status; + + status = UART_GET_FR(port); + if (status & UART01x_FR_DCD) + result |= TIOCM_CAR; + if (status & UART01x_FR_DSR) + result |= TIOCM_DSR; + if (status & UART01x_FR_CTS) + result |= TIOCM_CTS; + + return result; +} + +static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int ctrls = 0, ctrlc = 0; + + if (mctrl & TIOCM_RTS) + ctrlc |= uap->rts_mask; + else + ctrls |= uap->rts_mask; + + if (mctrl & TIOCM_DTR) + ctrlc |= uap->dtr_mask; + else + ctrls |= uap->dtr_mask; + + __raw_writel(ctrls, SC_CTRLS); + __raw_writel(ctrlc, SC_CTRLC); +} + +static void pl010_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int lcr_h; + + spin_lock_irqsave(&port->lock, flags); + lcr_h = UART_GET_LCRH(port); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; + UART_PUT_LCRH(port, lcr_h); + spin_unlock_irqrestore(&port->lock, flags); +} + +static int pl010_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(port->irq, pl010_int, 0, "uart-pl010", port); + if (retval) + return retval; + + /* + * initialise the old status of the modem signals + */ + uap->old_status = UART_GET_FR(port) & UART01x_FR_MODEM_ANY; + + /* + * Finally, enable interrupts + */ + UART_PUT_CR(port, UART01x_CR_UARTEN | UART010_CR_RIE | + UART010_CR_RTIE); + + return 0; +} + +static void pl010_shutdown(struct uart_port *port) +{ + /* + * Free the interrupt + */ + free_irq(port->irq, port); + + /* + * disable all interrupts, disable the port + */ + UART_PUT_CR(port, 0); + + /* disable break condition and fifos */ + UART_PUT_LCRH(port, UART_GET_LCRH(port) & + ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN)); +} + +static void +pl010_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + unsigned int lcr_h, old_cr; + unsigned long flags; + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr_h = UART01x_LCRH_WLEN_5; + break; + case CS6: + lcr_h = UART01x_LCRH_WLEN_6; + break; + case CS7: + lcr_h = UART01x_LCRH_WLEN_7; + break; + default: // CS8 + lcr_h = UART01x_LCRH_WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + lcr_h |= UART01x_LCRH_STP2; + if (termios->c_cflag & PARENB) { + lcr_h |= UART01x_LCRH_PEN; + if (!(termios->c_cflag & PARODD)) + lcr_h |= UART01x_LCRH_EPS; + } + if (port->fifosize > 1) + lcr_h |= UART01x_LCRH_FEN; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART01x_RSR_OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART01x_RSR_BE; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART01x_RSR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART01x_RSR_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_RSR_RX; + + /* first, disable everything */ + old_cr = UART_GET_CR(port) & ~UART010_CR_MSIE; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= UART010_CR_MSIE; + + UART_PUT_CR(port, 0); + + /* Set baud rate */ + quot -= 1; + UART_PUT_LCRM(port, ((quot & 0xf00) >> 8)); + UART_PUT_LCRL(port, (quot & 0xff)); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ + UART_PUT_LCRH(port, lcr_h); + UART_PUT_CR(port, old_cr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pl010_type(struct uart_port *port) +{ + return port->type == PORT_AMBA ? "AMBA" : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void pl010_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int pl010_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, UART_PORT_SIZE, "uart-pl010") + != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pl010_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_AMBA; + pl010_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops amba_pl010_pops = { + .tx_empty = pl010_tx_empty, + .set_mctrl = pl010_set_mctrl, + .get_mctrl = pl010_get_mctrl, + .stop_tx = pl010_stop_tx, + .start_tx = pl010_start_tx, + .stop_rx = pl010_stop_rx, + .enable_ms = pl010_enable_ms, + .break_ctl = pl010_break_ctl, + .startup = pl010_startup, + .shutdown = pl010_shutdown, + .set_termios = pl010_set_termios, + .type = pl010_type, + .release_port = pl010_release_port, + .request_port = pl010_request_port, + .config_port = pl010_config_port, + .verify_port = pl010_verify_port, +}; + +static struct uart_amba_port amba_ports[UART_NR] = { + { + .port = { + .membase = (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE), + .mapbase = INTEGRATOR_UART0_BASE, + .iotype = SERIAL_IO_MEM, + .irq = IRQ_UARTINT0, + .uartclk = 14745600, + .fifosize = 16, + .ops = &amba_pl010_pops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .dtr_mask = 1 << 5, + .rts_mask = 1 << 4, + }, + { + .port = { + .membase = (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE), + .mapbase = INTEGRATOR_UART1_BASE, + .iotype = SERIAL_IO_MEM, + .irq = IRQ_UARTINT1, + .uartclk = 14745600, + .fifosize = 16, + .ops = &amba_pl010_pops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + .dtr_mask = 1 << 7, + .rts_mask = 1 << 6, + } +}; + +#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE + +static void +pl010_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &amba_ports[co->index].port; + unsigned int status, old_cr; + int i; + + /* + * First save the CR then disable the interrupts + */ + old_cr = UART_GET_CR(port); + UART_PUT_CR(port, UART01x_CR_UARTEN); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++) { + do { + status = UART_GET_FR(port); + } while (!UART_TX_READY(status)); + UART_PUT_CHAR(port, s[i]); + if (s[i] == '\n') { + do { + status = UART_GET_FR(port); + } while (!UART_TX_READY(status)); + UART_PUT_CHAR(port, '\r'); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = UART_GET_FR(port); + } while (status & UART01x_FR_BUSY); + UART_PUT_CR(port, old_cr); +} + +static void __init +pl010_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (UART_GET_CR(port) & UART01x_CR_UARTEN) { + unsigned int lcr_h, quot; + lcr_h = UART_GET_LCRH(port); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; + + quot = UART_GET_LCRL(port) | UART_GET_LCRM(port) << 8; + *baud = port->uartclk / (16 * (quot + 1)); + } +} + +static int __init pl010_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &amba_ports[co->index].port; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + pl010_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +extern struct uart_driver amba_reg; +static struct console amba_console = { + .name = "ttyAM", + .write = pl010_console_write, + .device = uart_console_device, + .setup = pl010_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &amba_reg, +}; + +static int __init amba_console_init(void) +{ + /* + * All port initializations are done statically + */ + register_console(&amba_console); + return 0; +} +console_initcall(amba_console_init); + +static int __init amba_late_console_init(void) +{ + if (!(amba_console.flags & CON_ENABLED)) + register_console(&amba_console); + return 0; +} +late_initcall(amba_late_console_init); + +#define AMBA_CONSOLE &amba_console +#else +#define AMBA_CONSOLE NULL +#endif + +static struct uart_driver amba_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAM", + .dev_name = "ttyAM", + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, + .nr = UART_NR, + .cons = AMBA_CONSOLE, +}; + +static int pl010_probe(struct amba_device *dev, void *id) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + if (amba_ports[i].port.mapbase != dev->res.start) + continue; + + amba_ports[i].port.dev = &dev->dev; + uart_add_one_port(&amba_reg, &amba_ports[i].port); + amba_set_drvdata(dev, &amba_ports[i]); + break; + } + + return 0; +} + +static int pl010_remove(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (uap) + uart_remove_one_port(&amba_reg, &uap->port); + + amba_set_drvdata(dev, NULL); + + return 0; +} + +static int pl010_suspend(struct amba_device *dev, u32 state) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (uap) + uart_suspend_port(&amba_reg, &uap->port); + + return 0; +} + +static int pl010_resume(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + + if (uap) + uart_resume_port(&amba_reg, &uap->port); + + return 0; +} + +static struct amba_id pl010_ids[] __initdata = { + { + .id = 0x00041010, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +static struct amba_driver pl010_driver = { + .drv = { + .name = "uart-pl010", + }, + .id_table = pl010_ids, + .probe = pl010_probe, + .remove = pl010_remove, + .suspend = pl010_suspend, + .resume = pl010_resume, +}; + +static int __init pl010_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: AMBA driver $Revision: 1.41 $\n"); + + ret = uart_register_driver(&amba_reg); + if (ret == 0) { + ret = amba_driver_register(&pl010_driver); + if (ret) + uart_unregister_driver(&amba_reg); + } + return ret; +} + +static void __exit pl010_exit(void) +{ + amba_driver_unregister(&pl010_driver); + uart_unregister_driver(&amba_reg); +} + +module_init(pl010_init); +module_exit(pl010_exit); + +MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("ARM AMBA serial port driver $Revision: 1.41 $"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c new file mode 100644 index 000000000000..ff658a830f34 --- /dev/null +++ b/drivers/serial/amba-pl011.c @@ -0,0 +1,869 @@ +/* + * linux/drivers/char/amba.c + * + * Driver for AMBA serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $ + * + * This is a generic driver for ARM AMBA-type serial ports. They + * have a lot of 16550-like features, but are not register compatible. + * Note that although they do have CTS, DCD and DSR inputs, they do + * not have an RI input, nor do they have DTR or RTS outputs. If + * required, these have to be supplied via some other means (eg, GPIO) + * and hooked into this driver. + */ +#include + +#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define UART_NR 14 + +#define SERIAL_AMBA_MAJOR 204 +#define SERIAL_AMBA_MINOR 64 +#define SERIAL_AMBA_NR UART_NR + +#define AMBA_ISR_PASS_LIMIT 256 + +#define UART_DUMMY_RSR_RX 256 + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_amba_port { + struct uart_port port; + struct clk *clk; + unsigned int im; /* interrupt mask */ + unsigned int old_status; +}; + +static void pl011_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im &= ~UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void pl011_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im |= UART011_TXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void pl011_stop_rx(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| + UART011_PEIM|UART011_BEIM|UART011_OEIM); + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void pl011_enable_ms(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + + uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; + writew(uap->im, uap->port.membase + UART011_IMSC); +} + +static void +#ifdef SUPPORT_SYSRQ +pl011_rx_chars(struct uart_amba_port *uap, struct pt_regs *regs) +#else +pl011_rx_chars(struct uart_amba_port *uap) +#endif +{ + struct tty_struct *tty = uap->port.info->tty; + unsigned int status, ch, flag, rsr, max_count = 256; + + status = readw(uap->port.membase + UART01x_FR); + while ((status & UART01x_FR_RXFE) == 0 && max_count--) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + /* + * If this failed then we will throw away the + * bytes but must do so to clear interrupts + */ + } + + ch = readw(uap->port.membase + UART01x_DR); + flag = TTY_NORMAL; + uap->port.icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + rsr = readw(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + if (rsr & UART01x_RSR_ANY) { + if (rsr & UART01x_RSR_BE) { + rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto ignore_char; + } else if (rsr & UART01x_RSR_PE) + uap->port.icount.parity++; + else if (rsr & UART01x_RSR_FE) + uap->port.icount.frame++; + if (rsr & UART01x_RSR_OE) + uap->port.icount.overrun++; + + rsr &= uap->port.read_status_mask; + + if (rsr & UART01x_RSR_BE) + flag = TTY_BREAK; + else if (rsr & UART01x_RSR_PE) + flag = TTY_PARITY; + else if (rsr & UART01x_RSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&uap->port, ch, regs)) + goto ignore_char; + + if ((rsr & uap->port.ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if ((rsr & UART01x_RSR_OE) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + ignore_char: + status = readw(uap->port.membase + UART01x_FR); + } + tty_flip_buffer_push(tty); + return; +} + +static void pl011_tx_chars(struct uart_amba_port *uap) +{ + struct circ_buf *xmit = &uap->port.info->xmit; + int count; + + if (uap->port.x_char) { + writew(uap->port.x_char, uap->port.membase + UART01x_DR); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { + pl011_stop_tx(&uap->port, 0); + return; + } + + count = uap->port.fifosize >> 1; + do { + writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + if (uart_circ_empty(xmit)) + pl011_stop_tx(&uap->port, 0); +} + +static void pl011_modem_status(struct uart_amba_port *uap) +{ + unsigned int status, delta; + + status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; + + if (!delta) + return; + + if (delta & UART01x_FR_DCD) + uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD); + + if (delta & UART01x_FR_DSR) + uap->port.icount.dsr++; + + if (delta & UART01x_FR_CTS) + uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS); + + wake_up_interruptible(&uap->port.info->delta_msr_wait); +} + +static irqreturn_t pl011_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_amba_port *uap = dev_id; + unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; + int handled = 0; + + spin_lock(&uap->port.lock); + + status = readw(uap->port.membase + UART011_MIS); + if (status) { + do { + writew(status & ~(UART011_TXIS|UART011_RTIS| + UART011_RXIS), + uap->port.membase + UART011_ICR); + + if (status & (UART011_RTIS|UART011_RXIS)) +#ifdef SUPPORT_SYSRQ + pl011_rx_chars(uap, regs); +#else + pl011_rx_chars(uap); +#endif + if (status & (UART011_DSRMIS|UART011_DCDMIS| + UART011_CTSMIS|UART011_RIMIS)) + pl011_modem_status(uap); + if (status & UART011_TXIS) + pl011_tx_chars(uap); + + if (pass_counter-- == 0) + break; + + status = readw(uap->port.membase + UART011_MIS); + } while (status != 0); + handled = 1; + } + + spin_unlock(&uap->port.lock); + + return IRQ_RETVAL(handled); +} + +static unsigned int pl01x_tx_empty(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int status = readw(uap->port.membase + UART01x_FR); + return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; +} + +static unsigned int pl01x_get_mctrl(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int result = 0; + unsigned int status = readw(uap->port.membase + UART01x_FR); + +#define BIT(uartbit, tiocmbit) \ + if (status & uartbit) \ + result |= tiocmbit + + BIT(UART01x_FR_DCD, TIOCM_CAR); + BIT(UART01x_FR_DSR, TIOCM_DSR); + BIT(UART01x_FR_CTS, TIOCM_CTS); + BIT(UART011_FR_RI, TIOCM_RNG); +#undef BIT + return result; +} + +static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + + cr = readw(uap->port.membase + UART011_CR); + +#define BIT(tiocmbit, uartbit) \ + if (mctrl & tiocmbit) \ + cr |= uartbit; \ + else \ + cr &= ~uartbit + + BIT(TIOCM_RTS, UART011_CR_RTS); + BIT(TIOCM_DTR, UART011_CR_DTR); + BIT(TIOCM_OUT1, UART011_CR_OUT1); + BIT(TIOCM_OUT2, UART011_CR_OUT2); + BIT(TIOCM_LOOP, UART011_CR_LBE); +#undef BIT + + writew(cr, uap->port.membase + UART011_CR); +} + +static void pl011_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned long flags; + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); + lcr_h = readw(uap->port.membase + UART011_LCRH); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else + lcr_h &= ~UART01x_LCRH_BRK; + writew(lcr_h, uap->port.membase + UART011_LCRH); + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +static int pl011_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + int retval; + + /* + * Try to enable the clock producer. + */ + retval = clk_enable(uap->clk); + if (retval) + goto out; + + uap->port.uartclk = clk_get_rate(uap->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); + if (retval) + goto clk_dis; + + writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + uap->port.membase + UART011_IFLS); + + /* + * Provoke TX FIFO interrupt into asserting. + */ + cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE; + writew(cr, uap->port.membase + UART011_CR); + writew(0, uap->port.membase + UART011_FBRD); + writew(1, uap->port.membase + UART011_IBRD); + writew(0, uap->port.membase + UART011_LCRH); + writew(0, uap->port.membase + UART01x_DR); + while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) + barrier(); + + cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; + writew(cr, uap->port.membase + UART011_CR); + + /* + * initialise the old status of the modem signals + */ + uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* + * Finally, enable interrupts + */ + spin_lock_irq(&uap->port.lock); + uap->im = UART011_RXIM | UART011_RTIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + spin_unlock_irq(&uap->port.lock); + + return 0; + + clk_dis: + clk_disable(uap->clk); + out: + return retval; +} + +static void pl011_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned long val; + + /* + * disable all interrupts + */ + spin_lock_irq(&uap->port.lock); + uap->im = 0; + writew(uap->im, uap->port.membase + UART011_IMSC); + writew(0xffff, uap->port.membase + UART011_ICR); + spin_unlock_irq(&uap->port.lock); + + /* + * Free the interrupt + */ + free_irq(uap->port.irq, uap); + + /* + * disable the port + */ + writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR); + + /* + * disable break condition and fifos + */ + val = readw(uap->port.membase + UART011_LCRH); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + writew(val, uap->port.membase + UART011_LCRH); + + /* + * Shut down the clock producer + */ + clk_disable(uap->clk); +} + +static void +pl011_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + unsigned int lcr_h, old_cr; + unsigned long flags; + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = port->uartclk * 4 / baud; + + switch (termios->c_cflag & CSIZE) { + case CS5: + lcr_h = UART01x_LCRH_WLEN_5; + break; + case CS6: + lcr_h = UART01x_LCRH_WLEN_6; + break; + case CS7: + lcr_h = UART01x_LCRH_WLEN_7; + break; + default: // CS8 + lcr_h = UART01x_LCRH_WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + lcr_h |= UART01x_LCRH_STP2; + if (termios->c_cflag & PARENB) { + lcr_h |= UART01x_LCRH_PEN; + if (!(termios->c_cflag & PARODD)) + lcr_h |= UART01x_LCRH_EPS; + } + if (port->fifosize > 1) + lcr_h |= UART01x_LCRH_FEN; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART01x_RSR_OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART01x_RSR_BE; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART01x_RSR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART01x_RSR_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_RSR_RX; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + pl011_enable_ms(port); + + /* first, disable everything */ + old_cr = readw(port->membase + UART011_CR); + writew(0, port->membase + UART011_CR); + + /* Set baud rate */ + writew(quot & 0x3f, port->membase + UART011_FBRD); + writew(quot >> 6, port->membase + UART011_IBRD); + + /* + * ----------v----------v----------v----------v----- + * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L + * ----------^----------^----------^----------^----- + */ + writew(lcr_h, port->membase + UART011_LCRH); + writew(old_cr, port->membase + UART011_CR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pl011_type(struct uart_port *port) +{ + return port->type == PORT_AMBA ? "AMBA/PL011" : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void pl010_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, SZ_4K); +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int pl010_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, SZ_4K, "uart-pl011") + != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void pl010_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_AMBA; + pl010_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops amba_pl011_pops = { + .tx_empty = pl01x_tx_empty, + .set_mctrl = pl011_set_mctrl, + .get_mctrl = pl01x_get_mctrl, + .stop_tx = pl011_stop_tx, + .start_tx = pl011_start_tx, + .stop_rx = pl011_stop_rx, + .enable_ms = pl011_enable_ms, + .break_ctl = pl011_break_ctl, + .startup = pl011_startup, + .shutdown = pl011_shutdown, + .set_termios = pl011_set_termios, + .type = pl011_type, + .release_port = pl010_release_port, + .request_port = pl010_request_port, + .config_port = pl010_config_port, + .verify_port = pl010_verify_port, +}; + +static struct uart_amba_port *amba_ports[UART_NR]; + +#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE + +static inline void +pl011_console_write_char(struct uart_amba_port *uap, char ch) +{ + unsigned int status; + + do { + status = readw(uap->port.membase + UART01x_FR); + } while (status & UART01x_FR_TXFF); + writew(ch, uap->port.membase + UART01x_DR); +} + +static void +pl011_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_amba_port *uap = amba_ports[co->index]; + unsigned int status, old_cr, new_cr; + int i; + + clk_enable(uap->clk); + + /* + * First save the CR then disable the interrupts + */ + old_cr = readw(uap->port.membase + UART011_CR); + new_cr = old_cr & ~UART011_CR_CTSEN; + new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; + writew(new_cr, uap->port.membase + UART011_CR); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++) { + pl011_console_write_char(uap, s[i]); + if (s[i] == '\n') + pl011_console_write_char(uap, '\r'); + } + + /* + * Finally, wait for transmitter to become empty + * and restore the TCR + */ + do { + status = readw(uap->port.membase + UART01x_FR); + } while (status & UART01x_FR_BUSY); + writew(old_cr, uap->port.membase + UART011_CR); + + clk_disable(uap->clk); +} + +static void __init +pl011_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) +{ + if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, ibrd, fbrd; + + lcr_h = readw(uap->port.membase + UART011_LCRH); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { + if (lcr_h & UART01x_LCRH_EPS) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7) + *bits = 7; + else + *bits = 8; + + ibrd = readw(uap->port.membase + UART011_IBRD); + fbrd = readw(uap->port.membase + UART011_FBRD); + + *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); + } +} + +static int __init pl011_console_setup(struct console *co, char *options) +{ + struct uart_amba_port *uap; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + uap = amba_ports[co->index]; + + uap->port.uartclk = clk_get_rate(uap->clk); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + pl011_console_get_options(uap, &baud, &parity, &bits); + + return uart_set_options(&uap->port, co, baud, parity, bits, flow); +} + +extern struct uart_driver amba_reg; +static struct console amba_console = { + .name = "ttyAMA", + .write = pl011_console_write, + .device = uart_console_device, + .setup = pl011_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &amba_reg, +}; + +#define AMBA_CONSOLE (&amba_console) +#else +#define AMBA_CONSOLE NULL +#endif + +static struct uart_driver amba_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAMA", + .dev_name = "ttyAMA", + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, + .nr = UART_NR, + .cons = AMBA_CONSOLE, +}; + +static int pl011_probe(struct amba_device *dev, void *id) +{ + struct uart_amba_port *uap; + void __iomem *base; + int i, ret; + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == NULL) + break; + + if (i == ARRAY_SIZE(amba_ports)) { + ret = -EBUSY; + goto out; + } + + uap = kmalloc(sizeof(struct uart_amba_port), GFP_KERNEL); + if (uap == NULL) { + ret = -ENOMEM; + goto out; + } + + base = ioremap(dev->res.start, PAGE_SIZE); + if (!base) { + ret = -ENOMEM; + goto free; + } + + memset(uap, 0, sizeof(struct uart_amba_port)); + uap->clk = clk_get(&dev->dev, "UARTCLK"); + if (IS_ERR(uap->clk)) { + ret = PTR_ERR(uap->clk); + goto unmap; + } + + ret = clk_use(uap->clk); + if (ret) + goto putclk; + + uap->port.dev = &dev->dev; + uap->port.mapbase = dev->res.start; + uap->port.membase = base; + uap->port.iotype = UPIO_MEM; + uap->port.irq = dev->irq[0]; + uap->port.fifosize = 16; + uap->port.ops = &amba_pl011_pops; + uap->port.flags = UPF_BOOT_AUTOCONF; + uap->port.line = i; + + amba_ports[i] = uap; + + amba_set_drvdata(dev, uap); + ret = uart_add_one_port(&amba_reg, &uap->port); + if (ret) { + amba_set_drvdata(dev, NULL); + amba_ports[i] = NULL; + clk_unuse(uap->clk); + putclk: + clk_put(uap->clk); + unmap: + iounmap(base); + free: + kfree(uap); + } + out: + return ret; +} + +static int pl011_remove(struct amba_device *dev) +{ + struct uart_amba_port *uap = amba_get_drvdata(dev); + int i; + + amba_set_drvdata(dev, NULL); + + uart_remove_one_port(&amba_reg, &uap->port); + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + + iounmap(uap->port.membase); + clk_unuse(uap->clk); + clk_put(uap->clk); + kfree(uap); + return 0; +} + +static struct amba_id pl011_ids[] __initdata = { + { + .id = 0x00041011, + .mask = 0x000fffff, + }, + { 0, 0 }, +}; + +static struct amba_driver pl011_driver = { + .drv = { + .name = "uart-pl011", + }, + .id_table = pl011_ids, + .probe = pl011_probe, + .remove = pl011_remove, +}; + +static int __init pl011_init(void) +{ + int ret; + printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); + + ret = uart_register_driver(&amba_reg); + if (ret == 0) { + ret = amba_driver_register(&pl011_driver); + if (ret) + uart_unregister_driver(&amba_reg); + } + return ret; +} + +static void __exit pl011_exit(void) +{ + amba_driver_unregister(&pl011_driver); + uart_unregister_driver(&amba_reg); +} + +module_init(pl011_init); +module_exit(pl011_exit); + +MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("ARM AMBA serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c new file mode 100644 index 000000000000..b6d3d5034940 --- /dev/null +++ b/drivers/serial/au1x00_uart.c @@ -0,0 +1,1312 @@ +/* + * Driver for 8250/16550-type serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2001 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. Currently, we don't + * support this very well, and it may well be dropped from this driver + * in future. As such, mapbase should be NULL. + * + * membase is an 'ioremapped' cookie. This is compatible with the old + * serial.c driver, and is currently the preferred form. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include "8250.h" + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 256 + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +static struct old_serial_port old_serial_port[] = { + { .baud_base = 0, + .iomem_base = (u8 *)UART0_ADDR, + .irq = AU1000_UART0_INT, + .flags = STD_COM_FLAGS, + .iomem_reg_shift = 2, + }, { + .baud_base = 0, + .iomem_base = (u8 *)UART1_ADDR, + .irq = AU1000_UART1_INT, + .flags = STD_COM_FLAGS, + .iomem_reg_shift = 2 + }, { + .baud_base = 0, + .iomem_base = (u8 *)UART2_ADDR, + .irq = AU1000_UART2_INT, + .flags = STD_COM_FLAGS, + .iomem_reg_shift = 2 + }, { + .baud_base = 0, + .iomem_base = (u8 *)UART3_ADDR, + .irq = AU1000_UART3_INT, + .flags = STD_COM_FLAGS, + .iomem_reg_shift = 2 + } +}; + +#define UART_NR ARRAY_SIZE(old_serial_port) + +struct uart_8250_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short rev; + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char lsr_break_flag; + + /* + * We provide a per-port pm hook. + */ + void (*pm)(struct uart_port *port, + unsigned int state, unsigned int old); +}; + +struct irq_info { + spinlock_t lock; + struct list_head *head; +}; + +static struct irq_info irq_lists[NR_IRQS]; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = { + { "unknown", 1, 0 }, + { "8250", 1, 0 }, + { "16450", 1, 0 }, + { "16550", 1, 0 }, + /* PORT_16550A */ + { "AU1X00_UART",16, UART_CLEAR_FIFO | UART_USE_FIFO }, +}; + +static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset) +{ + return au_readl((unsigned long)up->port.membase + offset); +} + +static _INLINE_ void +serial_out(struct uart_8250_port *up, int offset, int value) +{ + au_writel(value, (unsigned long)up->port.membase + offset); +} + +#define serial_inp(up, offset) serial_in(up, offset) +#define serial_outp(up, offset, value) serial_out(up, offset, value) + +/* + * This routine is called by rs_init() to initialize a specific serial + * port. It determines what type of UART chip this serial port is + * using: 8250, 16450, 16550, 16550A. The important question is + * whether or not this UART is a 16550A or not, since this will + * determine whether or not we can use its FIFO features or not. + */ +static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) +{ + unsigned char save_lcr, save_mcr; + unsigned long flags; + + if (!up->port.iobase && !up->port.mapbase && !up->port.membase) + return; + + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%08lx): ", + up->port.line, up->port.iobase, up->port.membase); + + /* + * We really do need global IRQs disabled here - we're going to + * be frobbing the chips IRQ enable register to see if it exists. + */ + spin_lock_irqsave(&up->port.lock, flags); +// save_flags(flags); cli(); + + save_mcr = serial_in(up, UART_MCR); + save_lcr = serial_in(up, UART_LCR); + + up->port.type = PORT_16550A; + serial_outp(up, UART_LCR, save_lcr); + + up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + + if (up->port.type == PORT_UNKNOWN) + goto out; + + /* + * Reset the UART. + */ + serial_outp(up, UART_MCR, save_mcr); + serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT)); + serial_outp(up, UART_FCR, 0); + (void)serial_in(up, UART_RX); + serial_outp(up, UART_IER, 0); + + out: + spin_unlock_irqrestore(&up->port.lock, flags); +// restore_flags(flags); + DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name); +} + +static void serial8250_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial8250_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial8250_stop_rx(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void serial8250_enable_ms(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static _INLINE_ void +receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs) +{ + struct tty_struct *tty = up->port.info->tty; + unsigned char ch; + int max_count = 256; + + do { + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + tty->flip.work.func((void *)tty); + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + return; // if TTY_DONT_FLIP is set + } + ch = serial_inp(up, UART_RX); + *tty->flip.char_buf_ptr = ch; + *tty->flip.flag_buf_ptr = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_AU1X00_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + *tty->flip.flag_buf_ptr = TTY_BREAK; + } else if (*status & UART_LSR_PE) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (*status & UART_LSR_FE) + *tty->flip.flag_buf_ptr = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch, regs)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) { + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + if ((*status & UART_LSR_OE) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + ignore_char: + *status = serial_inp(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + spin_unlock(&up->port.lock); + tty_flip_buffer_push(tty); + spin_lock(&up->port.lock); +} + +static _INLINE_ void transmit_chars(struct uart_8250_port *up) +{ + struct circ_buf *xmit = &up->port.info->xmit; + int count; + + if (up->port.x_char) { + serial_outp(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial8250_stop_tx(&up->port, 0); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + serial8250_stop_tx(&up->port, 0); +} + +static _INLINE_ void check_modem_status(struct uart_8250_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.info->delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static inline void +serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs) +{ + unsigned int status = serial_inp(up, UART_LSR); + + DEBUG_INTR("status = %x...", status); + + if (status & UART_LSR_DR) + receive_chars(up, &status, regs); + check_modem_status(up); + if (status & UART_LSR_THRE) + transmit_chars(up); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t serial8250_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0; + + DEBUG_INTR("serial8250_interrupt(%d)...", irq); + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_8250_port *up; + unsigned int iir; + + up = list_entry(l, struct uart_8250_port, list); + + iir = serial_in(up, UART_IIR); + if (!(iir & UART_IIR_NO_INT)) { + spin_lock(&up->port.lock); + serial8250_handle_port(up, regs); + spin_unlock(&up->port.lock); + + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + /* If we hit this, we're dead. */ + printk(KERN_ERR "serial8250: too much work for " + "irq%d\n", irq); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + /* FIXME! Was it really ours? */ + return IRQ_HANDLED; +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + + spin_unlock_irq(&i->lock); +} + +static int serial_link_irq_chain(struct uart_8250_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0; + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + + ret = request_irq(up->port.irq, serial8250_interrupt, + irq_flags, "serial", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_8250_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) + free_irq(up->port.irq, i); + + serial_do_unlink(i, up); +} + +/* + * This function is used to handle ports that do not have an + * interrupt. This doesn't work very well for 16450's, but gives + * barely passable results for a 16550A. (Although at the expense + * of much CPU overhead). + */ +static void serial8250_timeout(unsigned long data) +{ + struct uart_8250_port *up = (struct uart_8250_port *)data; + unsigned int timeout; + unsigned int iir; + + iir = serial_in(up, UART_IIR); + if (!(iir & UART_IIR_NO_INT)) { + spin_lock(&up->port.lock); + serial8250_handle_port(up, NULL); + spin_unlock(&up->port.lock); + } + + timeout = up->port.timeout; + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + mod_timer(&up->timer, jiffies + timeout); +} + +static unsigned int serial8250_tx_empty(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial8250_get_mctrl(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; + unsigned char status; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + status = serial_in(up, UART_MSR); + spin_unlock_irqrestore(&up->port.lock, flags); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr = (mcr & up->mcr_mask) | up->mcr_force; + + serial_out(up, UART_MCR, mcr); +} + +static void serial8250_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int serial8250_startup(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; + int retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reeanbled in set_termios()) + */ + if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_FCR, 0); + } + + /* + * Clear the interrupt registers. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(up->port.flags & UPF_BUGGY_UART) && + (serial_inp(up, UART_LSR) == 0xff)) { + printk("ttyS%d: LSR safety check engaged!\n", up->port.line); + return -ENODEV; + } + + retval = serial_link_irq_chain(up); + if (retval) + return retval; + + /* + * Now, initialize the UART + */ + serial_outp(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + if (!is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT1; + } else + /* + * Most PC uarts need OUT2 raised to enable interrupts. + */ + if (is_real_interrupt(up->port.irq)) + up->port.mctrl |= TIOCM_OUT2; + + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_outp(up, UART_IER, up->ier); + + if (up->port.flags & UPF_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (up->port.iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + (void) inb_p(icp); + } + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + return 0; +} + +static void serial8250_shutdown(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long flags; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_outp(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & UPF_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((up->port.iobase & 0xfe0) | 0x1f); + up->port.mctrl |= TIOCM_OUT1; + } else + up->port.mctrl &= ~TIOCM_OUT2; + + serial8250_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_FCR, 0); + + /* + * Read data port to reset things, and then unlink from + * the IRQ chain. + */ + (void) serial_in(up, UART_RX); + + if (!is_real_interrupt(up->port.irq)) + del_timer_sync(&up->timer); + else + serial_unlink_irq_chain(up); +} + +static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int quot; + + /* + * Handle magic divisors for baud rates above baud_base on + * SMSC SuperIO chips. + */ + if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/4)) + quot = 0x8001; + else if ((port->flags & UPF_MAGIC_MULTIPLIER) && + baud == (port->uartclk/8)) + quot = 0x8002; + else + quot = uart_get_divisor(port, baud); + + return quot; +} + +static void +serial8250_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + default: + case CS8: + cval = 0x03; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= 0x04; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = serial8250_get_divisor(port, baud); + quot = 0x35; /* FIXME */ + + /* + * Work around a bug in the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && + up->rev == 0x5201) + quot ++; + + if (uart_config[up->port.type].flags & UART_USE_FIFO) { + if (baud < 2400) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIGGER_1; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIGGER_8; + } + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + serial_outp(up, 0x28, quot & 0xffff); + up->lcr = cval; /* Save LCR */ + if (up->port.type != PORT_16750) { + if (fcr & UART_FCR_ENABLE_FIFO) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_FCR, fcr); /* set fcr */ + } + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial8250_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + if (state) { + /* sleep */ + if (up->pm) + up->pm(port, state, oldstate); + } else { + /* wake */ + if (up->pm) + up->pm(port, state, oldstate); + } +} + +/* + * Resource handling. This is complicated by the fact that resources + * depend on the port type. Maybe we should be claiming the standard + * 8250 ports, and then trying to get other resources as necessary? + */ +static int +serial8250_request_std_resource(struct uart_8250_port *up, struct resource **res) +{ + unsigned int size = 8 << up->port.regshift; + int ret = 0; + + switch (up->port.iotype) { + case SERIAL_IO_MEM: + if (up->port.mapbase) { + *res = request_mem_region(up->port.mapbase, size, "serial"); + if (!*res) + ret = -EBUSY; + } + break; + + case SERIAL_IO_HUB6: + case SERIAL_IO_PORT: + *res = request_region(up->port.iobase, size, "serial"); + if (!*res) + ret = -EBUSY; + break; + } + return ret; +} + + +static void serial8250_release_port(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + unsigned long start, offset = 0, size = 0; + + size <<= up->port.regshift; + + switch (up->port.iotype) { + case SERIAL_IO_MEM: + if (up->port.mapbase) { + /* + * Unmap the area. + */ + iounmap(up->port.membase); + up->port.membase = NULL; + + start = up->port.mapbase; + + if (size) + release_mem_region(start + offset, size); + release_mem_region(start, 8 << up->port.regshift); + } + break; + + case SERIAL_IO_HUB6: + case SERIAL_IO_PORT: + start = up->port.iobase; + + if (size) + release_region(start + offset, size); + release_region(start + offset, 8 << up->port.regshift); + break; + + default: + break; + } +} + +static int serial8250_request_port(struct uart_port *port) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + struct resource *res = NULL, *res_rsa = NULL; + int ret = 0; + + ret = serial8250_request_std_resource(up, &res); + + /* + * If we have a mapbase, then request that as well. + */ + if (ret == 0 && up->port.flags & UPF_IOREMAP) { + int size = res->end - res->start + 1; + + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) + ret = -ENOMEM; + } + + if (ret < 0) { + if (res_rsa) + release_resource(res_rsa); + if (res) + release_resource(res); + } + return ret; +} + +static void serial8250_config_port(struct uart_port *port, int flags) +{ + struct uart_8250_port *up = (struct uart_8250_port *)port; + struct resource *res_std = NULL, *res_rsa = NULL; + int probeflags = PROBE_ANY; + + probeflags &= ~PROBE_RSA; + + if (flags & UART_CONFIG_TYPE) + autoconfig(up, probeflags); + + /* + * If the port wasn't an RSA port, release the resource. + */ + if (up->port.type != PORT_RSA && res_rsa) + release_resource(res_rsa); + + if (up->port.type == PORT_UNKNOWN && res_std) + release_resource(res_std); +} + +static int +serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= NR_IRQS || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type > PORT_MAX_8250 || ser->type == PORT_CIRRUS || + ser->type == PORT_STARTECH) + return -EINVAL; + return 0; +} + +static const char * +serial8250_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops serial8250_pops = { + .tx_empty = serial8250_tx_empty, + .set_mctrl = serial8250_set_mctrl, + .get_mctrl = serial8250_get_mctrl, + .stop_tx = serial8250_stop_tx, + .start_tx = serial8250_start_tx, + .stop_rx = serial8250_stop_rx, + .enable_ms = serial8250_enable_ms, + .break_ctl = serial8250_break_ctl, + .startup = serial8250_startup, + .shutdown = serial8250_shutdown, + .set_termios = serial8250_set_termios, + .pm = serial8250_pm, + .type = serial8250_type, + .release_port = serial8250_release_port, + .request_port = serial8250_request_port, + .config_port = serial8250_config_port, + .verify_port = serial8250_verify_port, +}; + +static struct uart_8250_port serial8250_ports[UART_NR]; + +static void __init serial8250_isa_init_ports(void) +{ + struct uart_8250_port *up; + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port); + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = old_serial_port[i].irq; + up->port.uartclk = get_au1x00_uart_baud_base(); + up->port.flags = old_serial_port[i].flags; + up->port.hub6 = old_serial_port[i].hub6; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + up->port.ops = &serial8250_pops; + } +} + +static void __init serial8250_register_ports(struct uart_driver *drv) +{ + int i; + + serial8250_isa_init_ports(); + + for (i = 0; i < UART_NR; i++) { + struct uart_8250_port *up = &serial8250_ports[i]; + + up->port.line = i; + up->port.ops = &serial8250_pops; + init_timer(&up->timer); + up->timer.function = serial8250_timeout; + + /* + * ALPHA_KLUDGE_MCR needs to be killed. + */ + up->mcr_mask = ~ALPHA_KLUDGE_MCR; + up->mcr_force = ALPHA_KLUDGE_MCR; + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_AU1X00_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_8250_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial8250_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_8250_port *up = &serial8250_ports[co->index]; + unsigned int ier; + int i; + + /* + * First save the UER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++, s++) { + wait_for_xmitr(up); + + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, *s); + if (*s == 10) { + wait_for_xmitr(up); + serial_out(up, UART_TX, 13); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); +} + +static int __init serial8250_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &serial8250_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +extern struct uart_driver serial8250_reg; +static struct console serial8250_console = { + .name = "ttyS", + .write = serial8250_console_write, + .device = uart_console_device, + .setup = serial8250_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial8250_reg, +}; + +static int __init serial8250_console_init(void) +{ + serial8250_isa_init_ports(); + register_console(&serial8250_console); + return 0; +} +console_initcall(serial8250_console_init); + +#define SERIAL8250_CONSOLE &serial8250_console +#else +#define SERIAL8250_CONSOLE NULL +#endif + +static struct uart_driver serial8250_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = UART_NR, + .cons = SERIAL8250_CONSOLE, +}; + +int __init early_serial_setup(struct uart_port *port) +{ + serial8250_isa_init_ports(); + serial8250_ports[port->line].port = *port; + serial8250_ports[port->line].port.ops = &serial8250_pops; + return 0; +} + +/** + * serial8250_suspend_port - suspend one serial port + * @line: serial line number + * @level: the level of port suspension, as per uart_suspend_port + * + * Suspend one serial port. + */ +void serial8250_suspend_port(int line) +{ + uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); +} + +/** + * serial8250_resume_port - resume one serial port + * @line: serial line number + * @level: the level of port resumption, as per uart_resume_port + * + * Resume one serial port. + */ +void serial8250_resume_port(int line) +{ + uart_resume_port(&serial8250_reg, &serial8250_ports[line].port); +} + +static int __init serial8250_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: Au1x00 driver\n"); + + for (i = 0; i < NR_IRQS; i++) + spin_lock_init(&irq_lists[i].lock); + + ret = uart_register_driver(&serial8250_reg); + if (ret >= 0) + serial8250_register_ports(&serial8250_reg); + + return ret; +} + +static void __exit serial8250_exit(void) +{ + int i; + + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&serial8250_reg, &serial8250_ports[i].port); + + uart_unregister_driver(&serial8250_reg); +} + +module_init(serial8250_init); +module_exit(serial8250_exit); + +EXPORT_SYMBOL(serial8250_suspend_port); +EXPORT_SYMBOL(serial8250_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Au1x00 serial driver\n"); diff --git a/drivers/serial/bast_sio.c b/drivers/serial/bast_sio.c new file mode 100644 index 000000000000..2b48fab6f0c6 --- /dev/null +++ b/drivers/serial/bast_sio.c @@ -0,0 +1,80 @@ +/* linux/drivers/serial/bast_sio.c + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks + * + * http://www.simtec.co.uk/products/EB2410ITX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 23-Sep-2004 BJD Added copyright header + * 23-Sep-2004 BJD Added serial port remove code +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +static int __init serial_bast_register(unsigned long port, unsigned int irq) +{ + struct serial_struct serial_req; + + serial_req.flags = UPF_AUTOPROBE | UPF_SHARE_IRQ; + serial_req.baud_base = BASE_BAUD; + serial_req.irq = irq; + serial_req.io_type = UPIO_MEM; + serial_req.iomap_base = port; + serial_req.iomem_base = ioremap(port, 0x10); + serial_req.iomem_reg_shift = 0; + + return register_serial(&serial_req); +} + +#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO) + +static int port[2] = { -1, -1 }; + +static int __init serial_bast_init(void) +{ + if (machine_is_bast()) { + port[0] = serial_bast_register(SERIAL_BASE + 0x2f8, IRQ_PCSERIAL1); + port[1] = serial_bast_register(SERIAL_BASE + 0x3f8, IRQ_PCSERIAL2); + } + + return 0; +} + +static void __exit serial_bast_exit(void) +{ + if (port[0] != -1) + unregister_serial(port[0]); + if (port[1] != -1) + unregister_serial(port[1]); +} + + +module_init(serial_bast_init); +module_exit(serial_bast_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ben Dooks, ben@simtec.co.uk"); +MODULE_DESCRIPTION("BAST Onboard Serial setup"); + + diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c new file mode 100644 index 000000000000..16592fae47f3 --- /dev/null +++ b/drivers/serial/clps711x.c @@ -0,0 +1,609 @@ +/* + * linux/drivers/char/clps711x.c + * + * Driver for CLPS711x serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * $Id: clps711x.c,v 1.42 2002/07/28 10:03:28 rmk Exp $ + * + */ +#include + +#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#define UART_NR 2 + +#define SERIAL_CLPS711X_MAJOR 204 +#define SERIAL_CLPS711X_MINOR 40 +#define SERIAL_CLPS711X_NR UART_NR + +/* + * We use the relevant SYSCON register as a base address for these ports. + */ +#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1) +#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1) +#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1) +#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1) + +#define TX_IRQ(port) ((port)->irq) +#define RX_IRQ(port) ((port)->irq + 1) + +#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR) + +#define tx_enabled(port) ((port)->unused[0]) + +static void +clps711xuart_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + if (tx_enabled(port)) { + disable_irq(TX_IRQ(port)); + tx_enabled(port) = 0; + } +} + +static void +clps711xuart_start_tx(struct uart_port *port, unsigned int tty_start) +{ + if (!tx_enabled(port)) { + enable_irq(TX_IRQ(port)); + tx_enabled(port) = 1; + } +} + +static void clps711xuart_stop_rx(struct uart_port *port) +{ + disable_irq(RX_IRQ(port)); +} + +static void clps711xuart_enable_ms(struct uart_port *port) +{ +} + +static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = dev_id; + struct tty_struct *tty = port->info->tty; + unsigned int status, ch, flg, ignored = 0; + + status = clps_readl(SYSFLG(port)); + while (!(status & SYSFLG_URXFE)) { + ch = clps_readl(UARTDR(port)); + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + goto ignore_char; + port->icount.rx++; + + flg = TTY_NORMAL; + + /* + * Note that the error handling code is + * out of the main execution path + */ + if (ch & UART_ANY_ERR) + goto handle_error; + + if (uart_handle_sysrq_char(port, ch, regs)) + goto ignore_char; + + error_return: + tty_insert_flip_char(tty, ch, flg); + ignore_char: + status = clps_readl(SYSFLG(port)); + } + out: + tty_flip_buffer_push(tty); + return IRQ_HANDLED; + + handle_error: + if (ch & UARTDR_PARERR) + port->icount.parity++; + else if (ch & UARTDR_FRMERR) + port->icount.frame++; + if (ch & UARTDR_OVERR) + port->icount.overrun++; + + if (ch & port->ignore_status_mask) { + if (++ignored > 100) + goto out; + goto ignore_char; + } + ch &= port->read_status_mask; + + if (ch & UARTDR_PARERR) + flg = TTY_PARITY; + else if (ch & UARTDR_FRMERR) + flg = TTY_FRAME; + + if (ch & UARTDR_OVERR) { + /* + * CHECK: does overrun affect the current character? + * ASSUMPTION: it does not. + */ + tty_insert_flip_char(tty, ch, flg); + ch = 0; + flg = TTY_OVERRUN; + } +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + goto error_return; +} + +static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = dev_id; + struct circ_buf *xmit = &port->info->xmit; + int count; + + if (port->x_char) { + clps_writel(port->x_char, UARTDR(port)); + port->icount.tx++; + port->x_char = 0; + return IRQ_HANDLED; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + clps711xuart_stop_tx(port, 0); + return IRQ_HANDLED; + } + + count = port->fifosize >> 1; + do { + clps_writel(xmit->buf[xmit->tail], UARTDR(port)); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + clps711xuart_stop_tx(port, 0); + + return IRQ_HANDLED; +} + +static unsigned int clps711xuart_tx_empty(struct uart_port *port) +{ + unsigned int status = clps_readl(SYSFLG(port)); + return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT; +} + +static unsigned int clps711xuart_get_mctrl(struct uart_port *port) +{ + unsigned int port_addr; + unsigned int result = 0; + unsigned int status; + + port_addr = SYSFLG(port); + if (port_addr == SYSFLG1) { + status = clps_readl(SYSFLG1); + if (status & SYSFLG1_DCD) + result |= TIOCM_CAR; + if (status & SYSFLG1_DSR) + result |= TIOCM_DSR; + if (status & SYSFLG1_CTS) + result |= TIOCM_CTS; + } + + return result; +} + +static void +clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl) +{ +} + +static void clps711xuart_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int ubrlcr; + + spin_lock_irqsave(&port->lock, flags); + ubrlcr = clps_readl(UBRLCR(port)); + if (break_state == -1) + ubrlcr |= UBRLCR_BREAK; + else + ubrlcr &= ~UBRLCR_BREAK; + clps_writel(ubrlcr, UBRLCR(port)); + spin_unlock_irqrestore(&port->lock, flags); +} + +static int clps711xuart_startup(struct uart_port *port) +{ + unsigned int syscon; + int retval; + + tx_enabled(port) = 1; + + /* + * Allocate the IRQs + */ + retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0, + "clps711xuart_tx", port); + if (retval) + return retval; + + retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0, + "clps711xuart_rx", port); + if (retval) { + free_irq(TX_IRQ(port), port); + return retval; + } + + /* + * enable the port + */ + syscon = clps_readl(SYSCON(port)); + syscon |= SYSCON_UARTEN; + clps_writel(syscon, SYSCON(port)); + + return 0; +} + +static void clps711xuart_shutdown(struct uart_port *port) +{ + unsigned int ubrlcr, syscon; + + /* + * Free the interrupt + */ + free_irq(TX_IRQ(port), port); /* TX interrupt */ + free_irq(RX_IRQ(port), port); /* RX interrupt */ + + /* + * disable the port + */ + syscon = clps_readl(SYSCON(port)); + syscon &= ~SYSCON_UARTEN; + clps_writel(syscon, SYSCON(port)); + + /* + * disable break condition and fifos + */ + ubrlcr = clps_readl(UBRLCR(port)); + ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK); + clps_writel(ubrlcr, UBRLCR(port)); +} + +static void +clps711xuart_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + unsigned int ubrlcr, baud, quot; + unsigned long flags; + + /* + * We don't implement CREAD. + */ + termios->c_cflag |= CREAD; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { + case CS5: + ubrlcr = UBRLCR_WRDLEN5; + break; + case CS6: + ubrlcr = UBRLCR_WRDLEN6; + break; + case CS7: + ubrlcr = UBRLCR_WRDLEN7; + break; + default: // CS8 + ubrlcr = UBRLCR_WRDLEN8; + break; + } + if (termios->c_cflag & CSTOPB) + ubrlcr |= UBRLCR_XSTOP; + if (termios->c_cflag & PARENB) { + ubrlcr |= UBRLCR_PRTEN; + if (!(termios->c_cflag & PARODD)) + ubrlcr |= UBRLCR_EVENPRT; + } + if (port->fifosize > 1) + ubrlcr |= UBRLCR_FIFOEN; + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UARTDR_OVERR; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR; + if (termios->c_iflag & IGNBRK) { + /* + * If we're ignoring parity and break indicators, + * ignore overruns to (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UARTDR_OVERR; + } + + quot -= 1; + + clps_writel(ubrlcr | quot, UBRLCR(port)); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *clps711xuart_type(struct uart_port *port) +{ + return port->type == PORT_CLPS711X ? "CLPS711x" : NULL; +} + +/* + * Configure/autoconfigure the port. + */ +static void clps711xuart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_CLPS711X; +} + +static void clps711xuart_release_port(struct uart_port *port) +{ +} + +static int clps711xuart_request_port(struct uart_port *port) +{ + return 0; +} + +static struct uart_ops clps711x_pops = { + .tx_empty = clps711xuart_tx_empty, + .set_mctrl = clps711xuart_set_mctrl_null, + .get_mctrl = clps711xuart_get_mctrl, + .stop_tx = clps711xuart_stop_tx, + .start_tx = clps711xuart_start_tx, + .stop_rx = clps711xuart_stop_rx, + .enable_ms = clps711xuart_enable_ms, + .break_ctl = clps711xuart_break_ctl, + .startup = clps711xuart_startup, + .shutdown = clps711xuart_shutdown, + .set_termios = clps711xuart_set_termios, + .type = clps711xuart_type, + .config_port = clps711xuart_config_port, + .release_port = clps711xuart_release_port, + .request_port = clps711xuart_request_port, +}; + +static struct uart_port clps711x_ports[UART_NR] = { + { + .iobase = SYSCON1, + .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */ + .uartclk = 3686400, + .fifosize = 16, + .ops = &clps711x_pops, + .line = 0, + .flags = ASYNC_BOOT_AUTOCONF, + }, + { + .iobase = SYSCON2, + .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */ + .uartclk = 3686400, + .fifosize = 16, + .ops = &clps711x_pops, + .line = 1, + .flags = ASYNC_BOOT_AUTOCONF, + } +}; + +#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + * + * Note that this is called with interrupts already disabled + */ +static void +clps711xuart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = clps711x_ports + co->index; + unsigned int status, syscon; + int i; + + /* + * Ensure that the port is enabled. + */ + syscon = clps_readl(SYSCON(port)); + clps_writel(syscon | SYSCON_UARTEN, SYSCON(port)); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++) { + do { + status = clps_readl(SYSFLG(port)); + } while (status & SYSFLG_UTXFF); + clps_writel(s[i], UARTDR(port)); + if (s[i] == '\n') { + do { + status = clps_readl(SYSFLG(port)); + } while (status & SYSFLG_UTXFF); + clps_writel('\r', UARTDR(port)); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore the uart state. + */ + do { + status = clps_readl(SYSFLG(port)); + } while (status & SYSFLG_UBUSY); + + clps_writel(syscon, SYSCON(port)); +} + +static void __init +clps711xuart_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) { + unsigned int ubrlcr, quot; + + ubrlcr = clps_readl(UBRLCR(port)); + + *parity = 'n'; + if (ubrlcr & UBRLCR_PRTEN) { + if (ubrlcr & UBRLCR_EVENPRT) + *parity = 'e'; + else + *parity = 'o'; + } + + if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7) + *bits = 7; + else + *bits = 8; + + quot = ubrlcr & UBRLCR_BAUD_MASK; + *baud = port->uartclk / (16 * (quot + 1)); + } +} + +static int __init clps711xuart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + port = uart_get_console(clps711x_ports, UART_NR, co); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + clps711xuart_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +extern struct uart_driver clps711x_reg; +static struct console clps711x_console = { + .name = "ttyCL", + .write = clps711xuart_console_write, + .device = uart_console_device, + .setup = clps711xuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &clps711x_reg, +}; + +static int __init clps711xuart_console_init(void) +{ + register_console(&clps711x_console); + return 0; +} +console_initcall(clps711xuart_console_init); + +#define CLPS711X_CONSOLE &clps711x_console +#else +#define CLPS711X_CONSOLE NULL +#endif + +static struct uart_driver clps711x_reg = { + .driver_name = "ttyCL", + .dev_name = "ttyCL", + .major = SERIAL_CLPS711X_MAJOR, + .minor = SERIAL_CLPS711X_MINOR, + .nr = UART_NR, + + .cons = CLPS711X_CONSOLE, +}; + +static int __init clps711xuart_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: CLPS711x driver $Revision: 1.42 $\n"); + + ret = uart_register_driver(&clps711x_reg); + if (ret) + return ret; + + for (i = 0; i < UART_NR; i++) + uart_add_one_port(&clps711x_reg, &clps711x_ports[i]); + + return 0; +} + +static void __exit clps711xuart_exit(void) +{ + int i; + + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]); + + uart_unregister_driver(&clps711x_reg); +} + +module_init(clps711xuart_init); +module_exit(clps711xuart_exit); + +MODULE_AUTHOR("Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("CLPS-711x generic serial driver $Revision: 1.42 $"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR); diff --git a/drivers/serial/cpm_uart/Makefile b/drivers/serial/cpm_uart/Makefile new file mode 100644 index 000000000000..e072724ea754 --- /dev/null +++ b/drivers/serial/cpm_uart/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the Motorola 8xx FEC ethernet controller +# + +obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o + +# Select the correct platform objects. +cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o +cpm_uart-objs-$(CONFIG_8xx) += cpm_uart_cpm1.o + +cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y) diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h new file mode 100644 index 000000000000..5f6187baad86 --- /dev/null +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -0,0 +1,89 @@ +/* + * linux/drivers/serial/cpm_uart.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * + */ +#ifndef CPM_UART_H +#define CPM_UART_H + +#include + +#if defined(CONFIG_CPM2) +#include "cpm_uart_cpm2.h" +#elif defined(CONFIG_8xx) +#include "cpm_uart_cpm1.h" +#endif + +#define SERIAL_CPM_MAJOR 204 +#define SERIAL_CPM_MINOR 46 + +#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC) +#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING) +#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */ +#define FLAG_SMC 0x00000002 +#define FLAG_CONSOLE 0x00000001 + +#define UART_SMC1 0 +#define UART_SMC2 1 +#define UART_SCC1 2 +#define UART_SCC2 3 +#define UART_SCC3 4 +#define UART_SCC4 5 + +#define UART_NR 6 + +#define RX_NUM_FIFO 4 +#define RX_BUF_SIZE 32 +#define TX_NUM_FIFO 4 +#define TX_BUF_SIZE 32 + +struct uart_cpm_port { + struct uart_port port; + u16 rx_nrfifos; + u16 rx_fifosize; + u16 tx_nrfifos; + u16 tx_fifosize; + smc_t *smcp; + smc_uart_t *smcup; + scc_t *sccp; + scc_uart_t *sccup; + volatile cbd_t *rx_bd_base; + volatile cbd_t *rx_cur; + volatile cbd_t *tx_bd_base; + volatile cbd_t *tx_cur; + unsigned char *tx_buf; + unsigned char *rx_buf; + u32 flags; + void (*set_lineif)(struct uart_cpm_port *); + u8 brg; + uint dp_addr; + void *mem_addr; + dma_addr_t dma_addr; + /* helpers */ + int baud; + int bits; + /* Keep track of 'odd' SMC2 wirings */ + int is_portb; +}; + +extern int cpm_uart_port_map[UART_NR]; +extern int cpm_uart_nr; +extern struct uart_cpm_port cpm_uart_ports[UART_NR]; + +/* these are located in their respective files */ +void cpm_line_cr_cmd(int line, int cmd); +int cpm_uart_init_portdesc(void); +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); +void cpm_uart_freebuf(struct uart_cpm_port *pinfo); + +void smc1_lineif(struct uart_cpm_port *pinfo); +void smc2_lineif(struct uart_cpm_port *pinfo); +void scc1_lineif(struct uart_cpm_port *pinfo); +void scc2_lineif(struct uart_cpm_port *pinfo); +void scc3_lineif(struct uart_cpm_port *pinfo); +void scc4_lineif(struct uart_cpm_port *pinfo); + +#endif /* CPM_UART_H */ diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c new file mode 100644 index 000000000000..29db677d4284 --- /dev/null +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -0,0 +1,1177 @@ +/* + * linux/drivers/serial/cpm_uart.c + * + * Driver for CPM (SCC/SMC) serial ports; core driver + * + * Based on arch/ppc/cpm2_io/uart.c by Dan Malek + * Based on ppc8xx.c by Thomas Gleixner + * Based on drivers/serial/amba.c by Russell King + * + * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include + +#include "cpm_uart.h" + +/***********************************************************************/ + +/* Track which ports are configured as uarts */ +int cpm_uart_port_map[UART_NR]; +/* How many ports did we config as uarts */ +int cpm_uart_nr; + +/**************************************************************/ + +static int cpm_uart_tx_pump(struct uart_port *port); +static void cpm_uart_init_smc(struct uart_cpm_port *pinfo); +static void cpm_uart_init_scc(struct uart_cpm_port *pinfo); +static void cpm_uart_initbd(struct uart_cpm_port *pinfo); + +/**************************************************************/ + +/* + * Check, if transmit buffers are processed +*/ +static unsigned int cpm_uart_tx_empty(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + volatile cbd_t *bdp = pinfo->tx_bd_base; + int ret = 0; + + while (1) { + if (bdp->cbd_sc & BD_SC_READY) + break; + + if (bdp->cbd_sc & BD_SC_WRAP) { + ret = TIOCSER_TEMT; + break; + } + bdp++; + } + + pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret); + + return ret; +} + +static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* Whee. Do nothing. */ +} + +static unsigned int cpm_uart_get_mctrl(struct uart_port *port) +{ + /* Whee. Do nothing. */ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/* + * Stop transmitter + */ +static void cpm_uart_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + volatile smc_t *smcp = pinfo->smcp; + volatile scc_t *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:stop tx\n", port->line); + + if (IS_SMC(pinfo)) + smcp->smc_smcm &= ~SMCM_TX; + else + sccp->scc_sccm &= ~UART_SCCM_TX; +} + +/* + * Start transmitter + */ +static void cpm_uart_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + volatile smc_t *smcp = pinfo->smcp; + volatile scc_t *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:start tx\n", port->line); + + if (IS_SMC(pinfo)) { + if (smcp->smc_smcm & SMCM_TX) + return; + } else { + if (sccp->scc_sccm & UART_SCCM_TX) + return; + } + + if (cpm_uart_tx_pump(port) != 0) { + if (IS_SMC(pinfo)) + smcp->smc_smcm |= SMCM_TX; + else + sccp->scc_sccm |= UART_SCCM_TX; + } +} + +/* + * Stop receiver + */ +static void cpm_uart_stop_rx(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + volatile smc_t *smcp = pinfo->smcp; + volatile scc_t *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:stop rx\n", port->line); + + if (IS_SMC(pinfo)) + smcp->smc_smcm &= ~SMCM_RX; + else + sccp->scc_sccm &= ~UART_SCCM_RX; +} + +/* + * Enable Modem status interrupts + */ +static void cpm_uart_enable_ms(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:enable ms\n", port->line); +} + +/* + * Generate a break. + */ +static void cpm_uart_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + int line = pinfo - cpm_uart_ports; + + pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line, + break_state); + + if (break_state) + cpm_line_cr_cmd(line, CPM_CR_STOP_TX); + else + cpm_line_cr_cmd(line, CPM_CR_RESTART_TX); +} + +/* + * Transmit characters, refill buffer descriptor, if possible + */ +static void cpm_uart_int_tx(struct uart_port *port, struct pt_regs *regs) +{ + pr_debug("CPM uart[%d]:TX INT\n", port->line); + + cpm_uart_tx_pump(port); +} + +/* + * Receive characters + */ +static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs) +{ + int i; + unsigned char ch, *cp; + struct tty_struct *tty = port->info->tty; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + volatile cbd_t *bdp; + u16 status; + unsigned int flg; + + pr_debug("CPM uart[%d]:RX INT\n", port->line); + + /* Just loop through the closed BDs and copy the characters into + * the buffer. + */ + bdp = pinfo->rx_cur; + for (;;) { + /* get status */ + status = bdp->cbd_sc; + /* If this one is empty, return happy */ + if (status & BD_SC_EMPTY) + break; + + /* get number of characters, and check spce in flip-buffer */ + i = bdp->cbd_datlen; + + /* If we have not enough room in tty flip buffer, then we try + * later, which will be the next rx-interrupt or a timeout + */ + if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) { + tty->flip.work.func((void *)tty); + if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) { + printk(KERN_WARNING "TTY_DONT_FLIP set\n"); + return; + } + } + + /* get pointer */ + cp = (unsigned char *)bus_to_virt(bdp->cbd_bufaddr); + + /* loop through the buffer */ + while (i-- > 0) { + ch = *cp++; + port->icount.rx++; + flg = TTY_NORMAL; + + if (status & + (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV)) + goto handle_error; + if (uart_handle_sysrq_char(port, ch, regs)) + continue; + + error_return: + *tty->flip.char_buf_ptr++ = ch; + *tty->flip.flag_buf_ptr++ = flg; + tty->flip.count++; + + } /* End while (i--) */ + + /* This BD is ready to be used again. Clear status. get next */ + bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV); + bdp->cbd_sc |= BD_SC_EMPTY; + + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = pinfo->rx_bd_base; + else + bdp++; + } /* End for (;;) */ + + /* Write back buffer pointer */ + pinfo->rx_cur = (volatile cbd_t *) bdp; + + /* activate BH processing */ + tty_flip_buffer_push(tty); + + return; + + /* Error processing */ + + handle_error: + /* Statistics */ + if (status & BD_SC_BR) + port->icount.brk++; + if (status & BD_SC_PR) + port->icount.parity++; + if (status & BD_SC_FR) + port->icount.frame++; + if (status & BD_SC_OV) + port->icount.overrun++; + + /* Mask out ignored conditions */ + status &= port->read_status_mask; + + /* Handle the remaining ones */ + if (status & BD_SC_BR) + flg = TTY_BREAK; + else if (status & BD_SC_PR) + flg = TTY_PARITY; + else if (status & BD_SC_FR) + flg = TTY_FRAME; + + /* overrun does not affect the current character ! */ + if (status & BD_SC_OV) { + ch = 0; + flg = TTY_OVERRUN; + /* We skip this buffer */ + /* CHECK: Is really nothing senseful there */ + /* ASSUMPTION: it contains nothing valid */ + i = 0; + } +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + goto error_return; +} + +/* + * Asynchron mode interrupt handler + */ +static irqreturn_t cpm_uart_int(int irq, void *data, struct pt_regs *regs) +{ + u8 events; + struct uart_port *port = (struct uart_port *)data; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + volatile smc_t *smcp = pinfo->smcp; + volatile scc_t *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:IRQ\n", port->line); + + if (IS_SMC(pinfo)) { + events = smcp->smc_smce; + if (events & SMCM_BRKE) + uart_handle_break(port); + if (events & SMCM_RX) + cpm_uart_int_rx(port, regs); + if (events & SMCM_TX) + cpm_uart_int_tx(port, regs); + smcp->smc_smce = events; + } else { + events = sccp->scc_scce; + if (events & UART_SCCM_BRKE) + uart_handle_break(port); + if (events & UART_SCCM_RX) + cpm_uart_int_rx(port, regs); + if (events & UART_SCCM_TX) + cpm_uart_int_tx(port, regs); + sccp->scc_scce = events; + } + return (events) ? IRQ_HANDLED : IRQ_NONE; +} + +static int cpm_uart_startup(struct uart_port *port) +{ + int retval; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + pr_debug("CPM uart[%d]:startup\n", port->line); + + /* Install interrupt handler. */ + retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port); + if (retval) + return retval; + + /* Startup rx-int */ + if (IS_SMC(pinfo)) { + pinfo->smcp->smc_smcm |= SMCM_RX; + pinfo->smcp->smc_smcmr |= SMCMR_REN; + } else { + pinfo->sccp->scc_sccm |= UART_SCCM_RX; + } + + return 0; +} + +/* + * Shutdown the uart + */ +static void cpm_uart_shutdown(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + int line = pinfo - cpm_uart_ports; + + pr_debug("CPM uart[%d]:shutdown\n", port->line); + + /* free interrupt handler */ + free_irq(port->irq, port); + + /* If the port is not the console, disable Rx and Tx. */ + if (!(pinfo->flags & FLAG_CONSOLE)) { + /* Stop uarts */ + if (IS_SMC(pinfo)) { + volatile smc_t *smcp = pinfo->smcp; + smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); + } else { + volatile scc_t *sccp = pinfo->sccp; + sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); + } + + /* Shut them really down and reinit buffer descriptors */ + cpm_line_cr_cmd(line, CPM_CR_STOP_TX); + cpm_uart_initbd(pinfo); + } +} + +static void cpm_uart_set_termios(struct uart_port *port, + struct termios *termios, struct termios *old) +{ + int baud; + unsigned long flags; + u16 cval, scval, prev_mode; + int bits, sbits; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + volatile smc_t *smcp = pinfo->smcp; + volatile scc_t *sccp = pinfo->sccp; + + pr_debug("CPM uart[%d]:set_termios\n", port->line); + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16); + + /* Character length programmed into the mode register is the + * sum of: 1 start bit, number of data bits, 0 or 1 parity bit, + * 1 or 2 stop bits, minus 1. + * The value 'bits' counts this for us. + */ + cval = 0; + scval = 0; + + /* byte size */ + switch (termios->c_cflag & CSIZE) { + case CS5: + bits = 5; + break; + case CS6: + bits = 6; + break; + case CS7: + bits = 7; + break; + case CS8: + bits = 8; + break; + /* Never happens, but GCC is too dumb to figure it out */ + default: + bits = 8; + break; + } + sbits = bits - 5; + + if (termios->c_cflag & CSTOPB) { + cval |= SMCMR_SL; /* Two stops */ + scval |= SCU_PSMR_SL; + bits++; + } + + if (termios->c_cflag & PARENB) { + cval |= SMCMR_PEN; + scval |= SCU_PSMR_PEN; + bits++; + if (!(termios->c_cflag & PARODD)) { + cval |= SMCMR_PM_EVEN; + scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP); + } + } + + /* + * Set up parity check flag + */ +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + + port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV); + if (termios->c_iflag & INPCK) + port->read_status_mask |= BD_SC_FR | BD_SC_PR; + if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK)) + port->read_status_mask |= BD_SC_BR; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_PR | BD_SC_FR; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BD_SC_BR; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= BD_SC_OV; + } + /* + * !!! ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + port->read_status_mask &= ~BD_SC_EMPTY; + + spin_lock_irqsave(&port->lock, flags); + + /* Start bit has not been added (so don't, because we would just + * subtract it later), and we need to add one for the number of + * stops bits (there is always at least one). + */ + bits++; + if (IS_SMC(pinfo)) { + /* Set the mode register. We want to keep a copy of the + * enables, because we want to put them back if they were + * present. + */ + prev_mode = smcp->smc_smcmr; + smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART; + smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN)); + } else { + sccp->scc_psmr = (sbits << 12) | scval; + } + + cpm_set_brg(pinfo->brg - 1, baud); + spin_unlock_irqrestore(&port->lock, flags); + +} + +static const char *cpm_uart_type(struct uart_port *port) +{ + pr_debug("CPM uart[%d]:uart_type\n", port->line); + + return port->type == PORT_CPM ? "CPM UART" : NULL; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int cpm_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + + pr_debug("CPM uart[%d]:verify_port\n", port->line); + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +/* + * Transmit characters, refill buffer descriptor, if possible + */ +static int cpm_uart_tx_pump(struct uart_port *port) +{ + volatile cbd_t *bdp; + unsigned char *p; + int count; + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + struct circ_buf *xmit = &port->info->xmit; + + /* Handle xon/xoff */ + if (port->x_char) { + /* Pick next descriptor and fill from buffer */ + bdp = pinfo->tx_cur; + + p = bus_to_virt(bdp->cbd_bufaddr); + *p++ = xmit->buf[xmit->tail]; + bdp->cbd_datlen = 1; + bdp->cbd_sc |= BD_SC_READY; + /* Get next BD. */ + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = pinfo->tx_bd_base; + else + bdp++; + pinfo->tx_cur = bdp; + + port->icount.tx++; + port->x_char = 0; + return 1; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + cpm_uart_stop_tx(port, 0); + return 0; + } + + /* Pick next descriptor and fill from buffer */ + bdp = pinfo->tx_cur; + + while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) { + count = 0; + p = bus_to_virt(bdp->cbd_bufaddr); + while (count < pinfo->tx_fifosize) { + *p++ = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + count++; + if (xmit->head == xmit->tail) + break; + } + bdp->cbd_datlen = count; + bdp->cbd_sc |= BD_SC_READY; + /* Get next BD. */ + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = pinfo->tx_bd_base; + else + bdp++; + } + pinfo->tx_cur = bdp; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) { + cpm_uart_stop_tx(port, 0); + return 0; + } + + return 1; +} + +/* + * init buffer descriptors + */ +static void cpm_uart_initbd(struct uart_cpm_port *pinfo) +{ + int i; + u8 *mem_addr; + volatile cbd_t *bdp; + + pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line); + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + mem_addr = pinfo->mem_addr; + bdp = pinfo->rx_cur = pinfo->rx_bd_base; + for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) { + bdp->cbd_bufaddr = virt_to_bus(mem_addr); + bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT; + mem_addr += pinfo->rx_fifosize; + } + + bdp->cbd_bufaddr = virt_to_bus(mem_addr); + bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; + + /* Set the physical address of the host memory + * buffers in the buffer descriptors, and the + * virtual address for us to work with. + */ + mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); + bdp = pinfo->tx_cur = pinfo->tx_bd_base; + for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) { + bdp->cbd_bufaddr = virt_to_bus(mem_addr); + bdp->cbd_sc = BD_SC_INTRPT; + mem_addr += pinfo->tx_fifosize; + } + + bdp->cbd_bufaddr = virt_to_bus(mem_addr); + bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT; +} + +static void cpm_uart_init_scc(struct uart_cpm_port *pinfo) +{ + int line = pinfo - cpm_uart_ports; + volatile scc_t *scp; + volatile scc_uart_t *sup; + + pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line); + + scp = pinfo->sccp; + sup = pinfo->sccup; + + /* Store address */ + pinfo->sccup->scc_genscc.scc_rbase = (unsigned char *)pinfo->rx_bd_base - DPRAM_BASE; + pinfo->sccup->scc_genscc.scc_tbase = (unsigned char *)pinfo->tx_bd_base - DPRAM_BASE; + + /* Set up the uart parameters in the + * parameter ram. + */ + + cpm_set_scc_fcr(sup); + + sup->scc_genscc.scc_mrblr = pinfo->rx_fifosize; + sup->scc_maxidl = pinfo->rx_fifosize; + sup->scc_brkcr = 1; + sup->scc_parec = 0; + sup->scc_frmec = 0; + sup->scc_nosec = 0; + sup->scc_brkec = 0; + sup->scc_uaddr1 = 0; + sup->scc_uaddr2 = 0; + sup->scc_toseq = 0; + sup->scc_char1 = 0x8000; + sup->scc_char2 = 0x8000; + sup->scc_char3 = 0x8000; + sup->scc_char4 = 0x8000; + sup->scc_char5 = 0x8000; + sup->scc_char6 = 0x8000; + sup->scc_char7 = 0x8000; + sup->scc_char8 = 0x8000; + sup->scc_rccm = 0xc0ff; + + /* Send the CPM an initialize command. + */ + cpm_line_cr_cmd(line, CPM_CR_INIT_TRX); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + scp->scc_gsmrh = 0; + scp->scc_gsmrl = + (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16); + + /* Enable rx interrupts and clear all pending events. */ + scp->scc_sccm = 0; + scp->scc_scce = 0xffff; + scp->scc_dsr = 0x7e7e; + scp->scc_psmr = 0x3000; + + scp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); +} + +static void cpm_uart_init_smc(struct uart_cpm_port *pinfo) +{ + int line = pinfo - cpm_uart_ports; + volatile smc_t *sp; + volatile smc_uart_t *up; + + pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line); + + sp = pinfo->smcp; + up = pinfo->smcup; + + /* Store address */ + pinfo->smcup->smc_rbase = (u_char *)pinfo->rx_bd_base - DPRAM_BASE; + pinfo->smcup->smc_tbase = (u_char *)pinfo->tx_bd_base - DPRAM_BASE; + +/* + * In case SMC1 is being relocated... + */ +#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH) + up->smc_rbptr = pinfo->smcup->smc_rbase; + up->smc_tbptr = pinfo->smcup->smc_tbase; + up->smc_rstate = 0; + up->smc_tstate = 0; + up->smc_brkcr = 1; /* number of break chars */ + up->smc_brkec = 0; +#endif + + /* Set up the uart parameters in the + * parameter ram. + */ + cpm_set_smc_fcr(up); + + /* Using idle charater time requires some additional tuning. */ + up->smc_mrblr = pinfo->rx_fifosize; + up->smc_maxidl = pinfo->rx_fifosize; + up->smc_brkcr = 1; + + cpm_line_cr_cmd(line, CPM_CR_INIT_TRX); + + /* Set UART mode, 8 bit, no parity, one stop. + * Enable receive and transmit. + */ + sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART; + + /* Enable only rx interrupts clear all pending events. */ + sp->smc_smcm = 0; + sp->smc_smce = 0xff; + + sp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN); +} + +/* + * Initialize port. This is called from early_console stuff + * so we have to be careful here ! + */ +static int cpm_uart_request_port(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + int ret; + + pr_debug("CPM uart[%d]:request port\n", port->line); + + if (pinfo->flags & FLAG_CONSOLE) + return 0; + + /* + * Setup any port IO, connect any baud rate generators, + * etc. This is expected to be handled by board + * dependant code + */ + if (pinfo->set_lineif) + pinfo->set_lineif(pinfo); + + if (IS_SMC(pinfo)) { + pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); + pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + } else { + pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); + pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + } + + ret = cpm_uart_allocbuf(pinfo, 0); + + if (ret) + return ret; + + cpm_uart_initbd(pinfo); + + return 0; +} + +static void cpm_uart_release_port(struct uart_port *port) +{ + struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port; + + if (!(pinfo->flags & FLAG_CONSOLE)) + cpm_uart_freebuf(pinfo); +} + +/* + * Configure/autoconfigure the port. + */ +static void cpm_uart_config_port(struct uart_port *port, int flags) +{ + pr_debug("CPM uart[%d]:config_port\n", port->line); + + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_CPM; + cpm_uart_request_port(port); + } +} +static struct uart_ops cpm_uart_pops = { + .tx_empty = cpm_uart_tx_empty, + .set_mctrl = cpm_uart_set_mctrl, + .get_mctrl = cpm_uart_get_mctrl, + .stop_tx = cpm_uart_stop_tx, + .start_tx = cpm_uart_start_tx, + .stop_rx = cpm_uart_stop_rx, + .enable_ms = cpm_uart_enable_ms, + .break_ctl = cpm_uart_break_ctl, + .startup = cpm_uart_startup, + .shutdown = cpm_uart_shutdown, + .set_termios = cpm_uart_set_termios, + .type = cpm_uart_type, + .release_port = cpm_uart_release_port, + .request_port = cpm_uart_request_port, + .config_port = cpm_uart_config_port, + .verify_port = cpm_uart_verify_port, +}; + +struct uart_cpm_port cpm_uart_ports[UART_NR] = { + [UART_SMC1] = { + .port = { + .irq = SMC1_IRQ, + .ops = &cpm_uart_pops, + .iotype = SERIAL_IO_MEM, + .lock = SPIN_LOCK_UNLOCKED, + }, + .flags = FLAG_SMC, + .tx_nrfifos = TX_NUM_FIFO, + .tx_fifosize = TX_BUF_SIZE, + .rx_nrfifos = RX_NUM_FIFO, + .rx_fifosize = RX_BUF_SIZE, + .set_lineif = smc1_lineif, + }, + [UART_SMC2] = { + .port = { + .irq = SMC2_IRQ, + .ops = &cpm_uart_pops, + .iotype = SERIAL_IO_MEM, + .lock = SPIN_LOCK_UNLOCKED, + }, + .flags = FLAG_SMC, + .tx_nrfifos = TX_NUM_FIFO, + .tx_fifosize = TX_BUF_SIZE, + .rx_nrfifos = RX_NUM_FIFO, + .rx_fifosize = RX_BUF_SIZE, + .set_lineif = smc2_lineif, +#ifdef CONFIG_SERIAL_CPM_ALT_SMC2 + .is_portb = 1, +#endif + }, + [UART_SCC1] = { + .port = { + .irq = SCC1_IRQ, + .ops = &cpm_uart_pops, + .iotype = SERIAL_IO_MEM, + .lock = SPIN_LOCK_UNLOCKED, + }, + .tx_nrfifos = TX_NUM_FIFO, + .tx_fifosize = TX_BUF_SIZE, + .rx_nrfifos = RX_NUM_FIFO, + .rx_fifosize = RX_BUF_SIZE, + .set_lineif = scc1_lineif, + }, + [UART_SCC2] = { + .port = { + .irq = SCC2_IRQ, + .ops = &cpm_uart_pops, + .iotype = SERIAL_IO_MEM, + .lock = SPIN_LOCK_UNLOCKED, + }, + .tx_nrfifos = TX_NUM_FIFO, + .tx_fifosize = TX_BUF_SIZE, + .rx_nrfifos = RX_NUM_FIFO, + .rx_fifosize = RX_BUF_SIZE, + .set_lineif = scc2_lineif, + }, + [UART_SCC3] = { + .port = { + .irq = SCC3_IRQ, + .ops = &cpm_uart_pops, + .iotype = SERIAL_IO_MEM, + .lock = SPIN_LOCK_UNLOCKED, + }, + .tx_nrfifos = TX_NUM_FIFO, + .tx_fifosize = TX_BUF_SIZE, + .rx_nrfifos = RX_NUM_FIFO, + .rx_fifosize = RX_BUF_SIZE, + .set_lineif = scc3_lineif, + }, + [UART_SCC4] = { + .port = { + .irq = SCC4_IRQ, + .ops = &cpm_uart_pops, + .iotype = SERIAL_IO_MEM, + .lock = SPIN_LOCK_UNLOCKED, + }, + .tx_nrfifos = TX_NUM_FIFO, + .tx_fifosize = TX_BUF_SIZE, + .rx_nrfifos = RX_NUM_FIFO, + .rx_fifosize = RX_BUF_SIZE, + .set_lineif = scc4_lineif, + }, +}; + +#ifdef CONFIG_SERIAL_CPM_CONSOLE +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * Note that this is called with interrupts already disabled + */ +static void cpm_uart_console_write(struct console *co, const char *s, + u_int count) +{ + struct uart_cpm_port *pinfo = + &cpm_uart_ports[cpm_uart_port_map[co->index]]; + unsigned int i; + volatile cbd_t *bdp, *bdbase; + volatile unsigned char *cp; + + /* Get the address of the host memory buffer. + */ + bdp = pinfo->tx_cur; + bdbase = pinfo->tx_bd_base; + + /* + * Now, do each character. This is not as bad as it looks + * since this is a holding FIFO and not a transmitting FIFO. + * We could add the complexity of filling the entire transmit + * buffer, but we would just wait longer between accesses...... + */ + for (i = 0; i < count; i++, s++) { + /* Wait for transmitter fifo to empty. + * Ready indicates output is ready, and xmt is doing + * that, not that it is ready for us to send. + */ + while ((bdp->cbd_sc & BD_SC_READY) != 0) + ; + + /* Send the character out. + * If the buffer address is in the CPM DPRAM, don't + * convert it. + */ + if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR) + cp = (unsigned char *) (bdp->cbd_bufaddr); + else + cp = bus_to_virt(bdp->cbd_bufaddr); + + *cp = *s; + + bdp->cbd_datlen = 1; + bdp->cbd_sc |= BD_SC_READY; + + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + + /* if a LF, also do CR... */ + if (*s == 10) { + while ((bdp->cbd_sc & BD_SC_READY) != 0) + ; + + if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR) + cp = (unsigned char *) (bdp->cbd_bufaddr); + else + cp = bus_to_virt(bdp->cbd_bufaddr); + + *cp = 13; + bdp->cbd_datlen = 1; + bdp->cbd_sc |= BD_SC_READY; + + if (bdp->cbd_sc & BD_SC_WRAP) + bdp = bdbase; + else + bdp++; + } + } + + /* + * Finally, Wait for transmitter & holding register to empty + * and restore the IER + */ + while ((bdp->cbd_sc & BD_SC_READY) != 0) + ; + + pinfo->tx_cur = (volatile cbd_t *) bdp; +} + +/* + * Setup console. Be careful is called early ! + */ +static int __init cpm_uart_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + struct uart_cpm_port *pinfo; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + port = + (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]]; + pinfo = (struct uart_cpm_port *)port; + + pinfo->flags |= FLAG_CONSOLE; + + if (options) { + uart_parse_options(options, &baud, &parity, &bits, &flow); + } else { + bd_t *bd = (bd_t *) __res; + + if (bd->bi_baudrate) + baud = bd->bi_baudrate; + else + baud = 9600; + } + + /* + * Setup any port IO, connect any baud rate generators, + * etc. This is expected to be handled by board + * dependant code + */ + if (pinfo->set_lineif) + pinfo->set_lineif(pinfo); + + if (IS_SMC(pinfo)) { + pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX); + pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + } else { + pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX); + pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + } + + ret = cpm_uart_allocbuf(pinfo, 1); + + if (ret) + return ret; + + cpm_uart_initbd(pinfo); + + if (IS_SMC(pinfo)) + cpm_uart_init_smc(pinfo); + else + cpm_uart_init_scc(pinfo); + + uart_set_options(port, co, baud, parity, bits, flow); + + return 0; +} + +extern struct uart_driver cpm_reg; +static struct console cpm_scc_uart_console = { + .name "ttyCPM", + .write cpm_uart_console_write, + .device uart_console_device, + .setup cpm_uart_console_setup, + .flags CON_PRINTBUFFER, + .index -1, + .data = &cpm_reg, +}; + +int __init cpm_uart_console_init(void) +{ + int ret = cpm_uart_init_portdesc(); + + if (!ret) + register_console(&cpm_scc_uart_console); + return ret; +} + +console_initcall(cpm_uart_console_init); + +#define CPM_UART_CONSOLE &cpm_scc_uart_console +#else +#define CPM_UART_CONSOLE NULL +#endif + +static struct uart_driver cpm_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyCPM", + .dev_name = "ttyCPM", + .major = SERIAL_CPM_MAJOR, + .minor = SERIAL_CPM_MINOR, + .cons = CPM_UART_CONSOLE, +}; + +static int __init cpm_uart_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n"); + +#ifndef CONFIG_SERIAL_CPM_CONSOLE + ret = cpm_uart_init_portdesc(); + if (ret) + return ret; +#endif + + cpm_reg.nr = cpm_uart_nr; + ret = uart_register_driver(&cpm_reg); + + if (ret) + return ret; + + for (i = 0; i < cpm_uart_nr; i++) { + int con = cpm_uart_port_map[i]; + cpm_uart_ports[con].port.line = i; + cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF; + uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port); + } + + return ret; +} + +static void __exit cpm_uart_exit(void) +{ + int i; + + for (i = 0; i < cpm_uart_nr; i++) { + int con = cpm_uart_port_map[i]; + uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port); + } + + uart_unregister_driver(&cpm_reg); +} + +module_init(cpm_uart_init); +module_exit(cpm_uart_exit); + +MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis"); +MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c new file mode 100644 index 000000000000..de26cf7b003c --- /dev/null +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -0,0 +1,290 @@ +/* + * linux/drivers/serial/cpm_uart.c + * + * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions + * + * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(int line, int cmd) +{ + ushort val; + volatile cpm8xx_t *cp = cpmp; + + switch (line) { + case UART_SMC1: + val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG; + break; + case UART_SMC2: + val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG; + break; + case UART_SCC1: + val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG; + break; + case UART_SCC2: + val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG; + break; + case UART_SCC3: + val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG; + break; + case UART_SCC4: + val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG; + break; + default: + return; + + } + cp->cp_cpcr = val; + while (cp->cp_cpcr & CPM_CR_FLG) ; +} + +void smc1_lineif(struct uart_cpm_port *pinfo) +{ + volatile cpm8xx_t *cp = cpmp; + unsigned int iobits = 0x000000c0; + + if (!pinfo->is_portb) { + cp->cp_pbpar |= iobits; + cp->cp_pbdir &= ~iobits; + cp->cp_pbodr &= ~iobits; + } else { + ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits; + ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits; + ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; + } + + pinfo->brg = 1; +} + +void smc2_lineif(struct uart_cpm_port *pinfo) +{ + /* XXX SMC2: insert port configuration here */ + pinfo->brg = 2; +} + +void scc1_lineif(struct uart_cpm_port *pinfo) +{ + /* XXX SCC1: insert port configuration here */ + pinfo->brg = 1; +} + +void scc2_lineif(struct uart_cpm_port *pinfo) +{ + /* XXX SCC2: insert port configuration here */ + pinfo->brg = 2; +} + +void scc3_lineif(struct uart_cpm_port *pinfo) +{ + /* XXX SCC3: insert port configuration here */ + pinfo->brg = 3; +} + +void scc4_lineif(struct uart_cpm_port *pinfo) +{ + /* XXX SCC4: insert port configuration here */ + pinfo->brg = 4; +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 *dp_mem; + uint dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_DPERR(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) { + mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz); + dma_addr = 0; + } else + mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm1.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; + pinfo->dma_addr = dma_addr; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (volatile cbd_t *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} + +/* Setup any dynamic params in the uart desc */ +int cpm_uart_init_portdesc(void) +{ + pr_debug("CPM uart[-]:init portdesc\n"); + + cpm_uart_nr = 0; +#ifdef CONFIG_SERIAL_CPM_SMC1 + cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0]; +/* + * Is SMC1 being relocated? + */ +# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH + cpm_uart_ports[UART_SMC1].smcup = + (smc_uart_t *) & cpmp->cp_dparam[0x3C0]; +# else + cpm_uart_ports[UART_SMC1].smcup = + (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1]; +# endif + cpm_uart_ports[UART_SMC1].port.mapbase = + (unsigned long)&cpmp->cp_smc[0]; + cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); + cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1; +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1]; + cpm_uart_ports[UART_SMC2].smcup = + (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2]; + cpm_uart_ports[UART_SMC2].port.mapbase = + (unsigned long)&cpmp->cp_smc[1]; + cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); + cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC1 + cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0]; + cpm_uart_ports[UART_SCC1].sccup = + (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1]; + cpm_uart_ports[UART_SCC1].port.mapbase = + (unsigned long)&cpmp->cp_scc[0]; + cpm_uart_ports[UART_SCC1].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC2 + cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1]; + cpm_uart_ports[UART_SCC2].sccup = + (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2]; + cpm_uart_ports[UART_SCC2].port.mapbase = + (unsigned long)&cpmp->cp_scc[1]; + cpm_uart_ports[UART_SCC2].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC3 + cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2]; + cpm_uart_ports[UART_SCC3].sccup = + (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3]; + cpm_uart_ports[UART_SCC3].port.mapbase = + (unsigned long)&cpmp->cp_scc[2]; + cpm_uart_ports[UART_SCC3].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC4 + cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3]; + cpm_uart_ports[UART_SCC4].sccup = + (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4]; + cpm_uart_ports[UART_SCC4].port.mapbase = + (unsigned long)&cpmp->cp_scc[3]; + cpm_uart_ports[UART_SCC4].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4; +#endif + return 0; +} diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h new file mode 100644 index 000000000000..5d867ab581b7 --- /dev/null +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h @@ -0,0 +1,45 @@ +/* + * linux/drivers/serial/cpm_uart_cpm1.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * definitions for cpm1 + * + */ + +#ifndef CPM_UART_CPM1_H +#define CPM_UART_CPM1_H + +#include + +/* defines for IRQs */ +#define SMC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC1) +#define SMC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC2) +#define SCC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC1) +#define SCC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC2) +#define SCC3_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC3) +#define SCC4_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC4) + +/* the CPM address */ +#define CPM_ADDR IMAP_ADDR + +static inline void cpm_set_brg(int brg, int baud) +{ + cpm_setbrg(brg, baud); +} + +static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup) +{ + sup->scc_genscc.scc_rfcr = SMC_EB; + sup->scc_genscc.scc_tfcr = SMC_EB; +} + +static inline void cpm_set_smc_fcr(volatile smc_uart_t * up) +{ + up->smc_rfcr = SMC_EB; + up->smc_tfcr = SMC_EB; +} + +#define DPRAM_BASE ((unsigned char *)&cpmp->cp_dpmem[0]) + +#endif diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c new file mode 100644 index 000000000000..b422c3abfba6 --- /dev/null +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -0,0 +1,328 @@ +/* + * linux/drivers/serial/cpm_uart_cpm2.c + * + * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions + * + * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2) + * Pantelis Antoniou (panto@intracom.gr) (CPM1) + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * (C) 2004 Intracom, S.A. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include "cpm_uart.h" + +/**************************************************************/ + +void cpm_line_cr_cmd(int line, int cmd) +{ + volatile cpm_cpm2_t *cp = cpmp; + ulong val; + + switch (line) { + case UART_SMC1: + val = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0, + cmd) | CPM_CR_FLG; + break; + case UART_SMC2: + val = mk_cr_cmd(CPM_CR_SMC2_PAGE, CPM_CR_SMC2_SBLOCK, 0, + cmd) | CPM_CR_FLG; + break; + case UART_SCC1: + val = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0, + cmd) | CPM_CR_FLG; + break; + case UART_SCC2: + val = mk_cr_cmd(CPM_CR_SCC2_PAGE, CPM_CR_SCC2_SBLOCK, 0, + cmd) | CPM_CR_FLG; + break; + case UART_SCC3: + val = mk_cr_cmd(CPM_CR_SCC3_PAGE, CPM_CR_SCC3_SBLOCK, 0, + cmd) | CPM_CR_FLG; + break; + case UART_SCC4: + val = mk_cr_cmd(CPM_CR_SCC4_PAGE, CPM_CR_SCC4_SBLOCK, 0, + cmd) | CPM_CR_FLG; + break; + default: + return; + + } + cp->cp_cpcr = val; + while (cp->cp_cpcr & CPM_CR_FLG) ; +} + +void smc1_lineif(struct uart_cpm_port *pinfo) +{ + volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + + /* SMC1 is only on port D */ + io->iop_ppard |= 0x00c00000; + io->iop_pdird |= 0x00400000; + io->iop_pdird &= ~0x00800000; + io->iop_psord &= ~0x00c00000; + + /* Wire BRG1 to SMC1 */ + cpm2_immr->im_cpmux.cmx_smr &= 0x0f; + pinfo->brg = 1; +} + +void smc2_lineif(struct uart_cpm_port *pinfo) +{ + volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + + /* SMC2 is only on port A */ + io->iop_ppara |= 0x00c00000; + io->iop_pdira |= 0x00400000; + io->iop_pdira &= ~0x00800000; + io->iop_psora &= ~0x00c00000; + + /* Wire BRG2 to SMC2 */ + cpm2_immr->im_cpmux.cmx_smr &= 0xf0; + pinfo->brg = 2; +} + +void scc1_lineif(struct uart_cpm_port *pinfo) +{ + volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + + /* Use Port D for SCC1 instead of other functions. */ + io->iop_ppard |= 0x00000003; + io->iop_psord &= ~0x00000001; /* Rx */ + io->iop_psord |= 0x00000002; /* Tx */ + io->iop_pdird &= ~0x00000001; /* Rx */ + io->iop_pdird |= 0x00000002; /* Tx */ + + /* Wire BRG1 to SCC1 */ + cpm2_immr->im_cpmux.cmx_scr &= 0x00ffffff; + cpm2_immr->im_cpmux.cmx_scr |= 0x00000000; + pinfo->brg = 1; +} + +void scc2_lineif(struct uart_cpm_port *pinfo) +{ + volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + io->iop_pparb |= 0x008b0000; + io->iop_pdirb |= 0x00880000; + io->iop_psorb |= 0x00880000; + io->iop_pdirb &= ~0x00030000; + io->iop_psorb &= ~0x00030000; + cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff; + cpm2_immr->im_cpmux.cmx_scr |= 0x00090000; + pinfo->brg = 2; +} + +void scc3_lineif(struct uart_cpm_port *pinfo) +{ + volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + io->iop_pparb |= 0x008b0000; + io->iop_pdirb |= 0x00880000; + io->iop_psorb |= 0x00880000; + io->iop_pdirb &= ~0x00030000; + io->iop_psorb &= ~0x00030000; + cpm2_immr->im_cpmux.cmx_scr &= 0xffff00ff; + cpm2_immr->im_cpmux.cmx_scr |= 0x00001200; + pinfo->brg = 3; +} + +void scc4_lineif(struct uart_cpm_port *pinfo) +{ + volatile iop_cpm2_t *io = &cpm2_immr->im_ioport; + + io->iop_ppard |= 0x00000600; + io->iop_psord &= ~0x00000600; /* Tx/Rx */ + io->iop_pdird &= ~0x00000200; /* Rx */ + io->iop_pdird |= 0x00000400; /* Tx */ + + cpm2_immr->im_cpmux.cmx_scr &= 0xffffff00; + cpm2_immr->im_cpmux.cmx_scr |= 0x0000001b; + pinfo->brg = 4; +} + +/* + * Allocate DP-Ram and memory buffers. We need to allocate a transmit and + * receive buffer descriptors from dual port ram, and a character + * buffer area from host mem. If we are allocating for the console we need + * to do it from bootmem + */ +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) +{ + int dpmemsz, memsz; + u8 *dp_mem; + uint dp_offset; + u8 *mem_addr; + dma_addr_t dma_addr = 0; + + pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); + + dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); + dp_offset = cpm_dpalloc(dpmemsz, 8); + if (IS_DPERR(dp_offset)) { + printk(KERN_ERR + "cpm_uart_cpm.c: could not allocate buffer descriptors\n"); + return -ENOMEM; + } + + dp_mem = cpm_dpram_addr(dp_offset); + + memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); + if (is_con) + mem_addr = alloc_bootmem(memsz); + else + mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr, + GFP_KERNEL); + + if (mem_addr == NULL) { + cpm_dpfree(dp_offset); + printk(KERN_ERR + "cpm_uart_cpm.c: could not allocate coherent memory\n"); + return -ENOMEM; + } + + pinfo->dp_addr = dp_offset; + pinfo->mem_addr = mem_addr; + pinfo->dma_addr = dma_addr; + + pinfo->rx_buf = mem_addr; + pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos + * pinfo->rx_fifosize); + + pinfo->rx_bd_base = (volatile cbd_t *)dp_mem; + pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; + + return 0; +} + +void cpm_uart_freebuf(struct uart_cpm_port *pinfo) +{ + dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos * + pinfo->rx_fifosize) + + L1_CACHE_ALIGN(pinfo->tx_nrfifos * + pinfo->tx_fifosize), pinfo->mem_addr, + pinfo->dma_addr); + + cpm_dpfree(pinfo->dp_addr); +} + +/* Setup any dynamic params in the uart desc */ +int cpm_uart_init_portdesc(void) +{ + pr_debug("CPM uart[-]:init portdesc\n"); + + cpm_uart_nr = 0; +#ifdef CONFIG_SERIAL_CPM_SMC1 + cpm_uart_ports[UART_SMC1].smcp = (smc_t *) & cpm2_immr->im_smc[0]; + cpm_uart_ports[UART_SMC1].smcup = + (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC1]; + cpm_uart_ports[UART_SMC1].port.mapbase = + (unsigned long)&cpm2_immr->im_smc[0]; + cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); + cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1; +#endif + +#ifdef CONFIG_SERIAL_CPM_SMC2 + cpm_uart_ports[UART_SMC2].smcp = (smc_t *) & cpm2_immr->im_smc[1]; + cpm_uart_ports[UART_SMC2].smcup = + (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC2]; + cpm_uart_ports[UART_SMC2].port.mapbase = + (unsigned long)&cpm2_immr->im_smc[1]; + cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX); + cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); + cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC1 + cpm_uart_ports[UART_SCC1].sccp = (scc_t *) & cpm2_immr->im_scc[0]; + cpm_uart_ports[UART_SCC1].sccup = + (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC1]; + cpm_uart_ports[UART_SCC1].port.mapbase = + (unsigned long)&cpm2_immr->im_scc[0]; + cpm_uart_ports[UART_SCC1].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC2 + cpm_uart_ports[UART_SCC2].sccp = (scc_t *) & cpm2_immr->im_scc[1]; + cpm_uart_ports[UART_SCC2].sccup = + (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC2]; + cpm_uart_ports[UART_SCC2].port.mapbase = + (unsigned long)&cpm2_immr->im_scc[1]; + cpm_uart_ports[UART_SCC2].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC3 + cpm_uart_ports[UART_SCC3].sccp = (scc_t *) & cpm2_immr->im_scc[2]; + cpm_uart_ports[UART_SCC3].sccup = + (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC3]; + cpm_uart_ports[UART_SCC3].port.mapbase = + (unsigned long)&cpm2_immr->im_scc[2]; + cpm_uart_ports[UART_SCC3].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3; +#endif + +#ifdef CONFIG_SERIAL_CPM_SCC4 + cpm_uart_ports[UART_SCC4].sccp = (scc_t *) & cpm2_immr->im_scc[3]; + cpm_uart_ports[UART_SCC4].sccup = + (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC4]; + cpm_uart_ports[UART_SCC4].port.mapbase = + (unsigned long)&cpm2_immr->im_scc[3]; + cpm_uart_ports[UART_SCC4].sccp->scc_sccm &= + ~(UART_SCCM_TX | UART_SCCM_RX); + cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &= + ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT); + cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq); + cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4; +#endif + + return 0; +} diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h new file mode 100644 index 000000000000..4793fecf8ece --- /dev/null +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h @@ -0,0 +1,45 @@ +/* + * linux/drivers/serial/cpm_uart_cpm2.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * definitions for cpm2 + * + */ + +#ifndef CPM_UART_CPM2_H +#define CPM_UART_CPM2_H + +#include + +/* defines for IRQs */ +#define SMC1_IRQ SIU_INT_SMC1 +#define SMC2_IRQ SIU_INT_SMC2 +#define SCC1_IRQ SIU_INT_SCC1 +#define SCC2_IRQ SIU_INT_SCC2 +#define SCC3_IRQ SIU_INT_SCC3 +#define SCC4_IRQ SIU_INT_SCC4 + +/* the CPM address */ +#define CPM_ADDR CPM_MAP_ADDR + +static inline void cpm_set_brg(int brg, int baud) +{ + cpm_setbrg(brg, baud); +} + +static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup) +{ + sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB; + sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB; +} + +static inline void cpm_set_smc_fcr(volatile smc_uart_t * up) +{ + up->smc_rfcr = CPMFCR_GBL | CPMFCR_EB; + up->smc_tfcr = CPMFCR_GBL | CPMFCR_EB; +} + +#define DPRAM_BASE ((unsigned char *)&cpm2_immr->im_dprambase[0]) + +#endif diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c new file mode 100644 index 000000000000..3da5494953af --- /dev/null +++ b/drivers/serial/crisv10.c @@ -0,0 +1,5059 @@ +/* $Id: serial.c,v 1.25 2004/09/29 10:33:49 starvik Exp $ + * + * Serial port driver for the ETRAX 100LX chip + * + * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Axis Communications AB + * + * Many, many authors. Based once upon a time on serial.c for 16x50. + * + * $Log: serial.c,v $ + * Revision 1.25 2004/09/29 10:33:49 starvik + * Resolved a dealock when printing debug from kernel. + * + * Revision 1.24 2004/08/27 23:25:59 johana + * rs_set_termios() must call change_speed() if c_iflag has changed or + * automatic XOFF handling will be enabled and transmitter will stop + * if 0x13 is received. + * + * Revision 1.23 2004/08/24 06:57:13 starvik + * More whitespace cleanup + * + * Revision 1.22 2004/08/24 06:12:20 starvik + * Whitespace cleanup + * + * Revision 1.20 2004/05/24 12:00:20 starvik + * Big merge of stuff from Linux 2.4 (e.g. manual mode for the serial port). + * + * Revision 1.19 2004/05/17 13:12:15 starvik + * Kernel console hook + * Big merge from Linux 2.4 still pending. + * + * Revision 1.18 2003/10/28 07:18:30 starvik + * Compiles with debug info + * + * Revision 1.17 2003/07/04 08:27:37 starvik + * Merge of Linux 2.5.74 + * + * Revision 1.16 2003/06/13 10:05:19 johana + * Help the user to avoid trouble by: + * Forcing mixed mode for status/control lines if not all pins are used. + * + * Revision 1.15 2003/06/13 09:43:01 johana + * Merged in the following changes from os/linux/arch/cris/drivers/serial.c + * + some minor changes to reduce diff. + * + * Revision 1.49 2003/05/30 11:31:54 johana + * Merged in change-branch--serial9bit that adds CMSPAR support for sticky + * parity (mark/space) + * + * Revision 1.48 2003/05/30 11:03:57 johana + * Implemented rs_send_xchar() by disabling the DMA and writing manually. + * Added e100_disable_txdma_channel() and e100_enable_txdma_channel(). + * Fixed rs_throttle() and rs_unthrottle() to properly call rs_send_xchar + * instead of setting info->x_char and check the CRTSCTS flag before + * controlling the rts pin. + * + * Revision 1.14 2003/04/09 08:12:44 pkj + * Corrected typo changes made upstream. + * + * Revision 1.13 2003/04/09 05:20:47 starvik + * Merge of Linux 2.5.67 + * + * Revision 1.11 2003/01/22 06:48:37 starvik + * Fixed warnings issued by GCC 3.2.1 + * + * Revision 1.9 2002/12/13 09:07:47 starvik + * Alert user that RX_TIMEOUT_TICKS==0 doesn't work + * + * Revision 1.8 2002/12/11 13:13:57 starvik + * Added arch/ to v10 specific includes + * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) + * + * Revision 1.7 2002/12/06 07:13:57 starvik + * Corrected work queue stuff + * Removed CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST + * + * Revision 1.6 2002/11/21 07:17:46 starvik + * Change static inline to extern inline where otherwise outlined with gcc-3.2 + * + * Revision 1.5 2002/11/14 15:59:49 starvik + * Linux 2.5 port of the latest serial driver from 2.4. The work queue stuff + * probably doesn't work yet. + * + * Revision 1.42 2002/11/05 09:08:47 johana + * Better implementation of rs_stop() and rs_start() that uses the XOFF + * register to start/stop transmission. + * change_speed() also initilises XOFF register correctly so that + * auto_xoff is enabled when IXON flag is set by user. + * This gives fast XOFF response times. + * + * Revision 1.41 2002/11/04 18:40:57 johana + * Implemented rs_stop() and rs_start(). + * Simple tests using hwtestserial indicates that this should be enough + * to make it work. + * + * Revision 1.40 2002/10/14 05:33:18 starvik + * RS-485 uses fast timers even if SERIAL_FAST_TIMER is disabled + * + * Revision 1.39 2002/09/30 21:00:57 johana + * Support for CONFIG_ETRAX_SERx_DTR_RI_DSR_CD_MIXED where the status and + * control pins can be mixed between PA and PB. + * If no serial port uses MIXED old solution is used + * (saves a few bytes and cycles). + * control_pins struct uses masks instead of bit numbers. + * Corrected dummy values and polarity in line_info() so + * /proc/tty/driver/serial is now correct. + * (the E100_xxx_GET() macros is really active low - perhaps not obvious) + * + * Revision 1.38 2002/08/23 11:01:36 starvik + * Check that serial port is enabled in all interrupt handlers to avoid + * restarts of DMA channels not assigned to serial ports + * + * Revision 1.37 2002/08/13 13:02:37 bjornw + * Removed some warnings because of unused code + * + * Revision 1.36 2002/08/08 12:50:01 starvik + * Serial interrupt is shared with synchronous serial port driver + * + * Revision 1.35 2002/06/03 10:40:49 starvik + * Increased RS-485 RTS toggle timer to 2 characters + * + * Revision 1.34 2002/05/28 18:59:36 johana + * Whitespace and comment fixing to be more like etrax100ser.c 1.71. + * + * Revision 1.33 2002/05/28 17:55:43 johana + * RS-485 uses FAST_TIMER if enabled, and starts a short (one char time) + * timer from tranismit_chars (interrupt context). + * The timer toggles RTS in interrupt context when expired giving minimum + * latencies. + * + * Revision 1.32 2002/05/22 13:58:00 johana + * Renamed rs_write() to raw_write() and made it inline. + * New rs_write() handles RS-485 if configured and enabled + * (moved code from e100_write_rs485()). + * RS-485 ioctl's uses copy_from_user() instead of verify_area(). + * + * Revision 1.31 2002/04/22 11:20:03 johana + * Updated copyright years. + * + * Revision 1.30 2002/04/22 09:39:12 johana + * RS-485 support compiles. + * + * Revision 1.29 2002/01/14 16:10:01 pkj + * Allocate the receive buffers dynamically. The static 4kB buffer was + * too small for the peaks. This means that we can get rid of the extra + * buffer and the copying to it. It also means we require less memory + * under normal operations, but can use more when needed (there is a + * cap at 64kB for safety reasons). If there is no memory available + * we panic(), and die a horrible death... + * + * Revision 1.28 2001/12/18 15:04:53 johana + * Cleaned up write_rs485() - now it works correctly without padding extra + * char. + * Added sane default initialisation of rs485. + * Added #ifdef around dummy variables. + * + * Revision 1.27 2001/11/29 17:00:41 pkj + * 2kB seems to be too small a buffer when using 921600 bps, + * so increase it to 4kB (this was already done for the elinux + * version of the serial driver). + * + * Revision 1.26 2001/11/19 14:20:41 pkj + * Minor changes to comments and unused code. + * + * Revision 1.25 2001/11/12 20:03:43 pkj + * Fixed compiler warnings. + * + * Revision 1.24 2001/11/12 15:10:05 pkj + * Total redesign of the receiving part of the serial driver. + * Uses eight chained descriptors to write to a 4kB buffer. + * This data is then serialised into a 2kB buffer. From there it + * is copied into the TTY's flip buffers when they become available. + * A lot of copying, and the sizes of the buffers might need to be + * tweaked, but all in all it should work better than the previous + * version, without the need to modify the TTY code in any way. + * Also note that erroneous bytes are now correctly marked in the + * flag buffers (instead of always marking the first byte). + * + * Revision 1.23 2001/10/30 17:53:26 pkj + * * Set info->uses_dma to 0 when a port is closed. + * * Mark the timer1 interrupt as a fast one (SA_INTERRUPT). + * * Call start_flush_timer() in start_receive() if + * CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is defined. + * + * Revision 1.22 2001/10/30 17:44:03 pkj + * Use %lu for received and transmitted counters in line_info(). + * + * Revision 1.21 2001/10/30 17:40:34 pkj + * Clean-up. The only change to functionality is that + * CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS(=5) is used instead of + * MAX_FLUSH_TIME(=8). + * + * Revision 1.20 2001/10/30 15:24:49 johana + * Added char_time stuff from 2.0 driver. + * + * Revision 1.19 2001/10/30 15:23:03 johana + * Merged with 1.13.2 branch + fixed indentation + * and changed CONFIG_ETRAX100_XYS to CONFIG_ETRAX_XYZ + * + * Revision 1.18 2001/09/24 09:27:22 pkj + * Completed ext_baud_table[] in cflag_to_baud() and cflag_to_etrax_baud(). + * + * Revision 1.17 2001/08/24 11:32:49 ronny + * More fixes for the CONFIG_ETRAX_SERIAL_PORT0 define. + * + * Revision 1.16 2001/08/24 07:56:22 ronny + * Added config ifdefs around ser0 irq requests. + * + * Revision 1.15 2001/08/16 09:10:31 bjarne + * serial.c - corrected the initialization of rs_table, the wrong defines + * where used. + * Corrected a test in timed_flush_handler. + * Changed configured to enabled. + * serial.h - Changed configured to enabled. + * + * Revision 1.14 2001/08/15 07:31:23 bjarne + * Introduced two new members to the e100_serial struct. + * configured - Will be set to 1 if the port has been configured in .config + * uses_dma - Should be set to 1 if the port uses DMA. Currently it is set + * to 1 + * when a port is opened. This is used to limit the DMA interrupt + * routines to only manipulate DMA channels actually used by the + * serial driver. + * + * Revision 1.13.2.2 2001/10/17 13:57:13 starvik + * Receiver was broken by the break fixes + * + * Revision 1.13.2.1 2001/07/20 13:57:39 ronny + * Merge with new stuff from etrax100ser.c. Works but haven't checked stuff + * like break handling. + * + * Revision 1.13 2001/05/09 12:40:31 johana + * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h + * + * Revision 1.12 2001/04/19 12:23:07 bjornw + * CONFIG_RS485 -> CONFIG_ETRAX_RS485 + * + * Revision 1.11 2001/04/05 14:29:48 markusl + * Updated according to review remarks i.e. + * -Use correct types in port structure to avoid compiler warnings + * -Try to use IO_* macros whenever possible + * -Open should never return -EBUSY + * + * Revision 1.10 2001/03/05 13:14:07 bjornw + * Another spelling fix + * + * Revision 1.9 2001/02/23 13:46:38 bjornw + * Spellling check + * + * Revision 1.8 2001/01/23 14:56:35 markusl + * Made use of ser1 optional + * Needed by USB + * + * Revision 1.7 2001/01/19 16:14:48 perf + * Added kernel options for serial ports 234. + * Changed option names from CONFIG_ETRAX100_XYZ to CONFIG_ETRAX_XYZ. + * + * Revision 1.6 2000/11/22 16:36:09 bjornw + * Please marketing by using the correct case when spelling Etrax. + * + * Revision 1.5 2000/11/21 16:43:37 bjornw + * Fixed so it compiles under CONFIG_SVINTO_SIM + * + * Revision 1.4 2000/11/15 17:34:12 bjornw + * Added a timeout timer for flushing input channels. The interrupt-based + * fast flush system should be easy to merge with this later (works the same + * way, only with an irq instead of a system timer_list) + * + * Revision 1.3 2000/11/13 17:19:57 bjornw + * * Incredibly, this almost complete rewrite of serial.c worked (at least + * for output) the first time. + * + * Items worth noticing: + * + * No Etrax100 port 1 workarounds (does only compile on 2.4 anyway now) + * RS485 is not ported (why can't it be done in userspace as on x86 ?) + * Statistics done through async_icount - if any more stats are needed, + * that's the place to put them or in an arch-dep version of it. + * timeout_interrupt and the other fast timeout stuff not ported yet + * There be dragons in this 3k+ line driver + * + * Revision 1.2 2000/11/10 16:50:28 bjornw + * First shot at a 2.4 port, does not compile totally yet + * + * Revision 1.1 2000/11/10 16:47:32 bjornw + * Added verbatim copy of rev 1.49 etrax100ser.c from elinux + * + * Revision 1.49 2000/10/30 15:47:14 tobiasa + * Changed version number. + * + * Revision 1.48 2000/10/25 11:02:43 johana + * Changed %ul to %lu in printf's + * + * Revision 1.47 2000/10/18 15:06:53 pkj + * Compile correctly with CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST and + * CONFIG_ETRAX_SERIAL_PROC_ENTRY together. + * Some clean-up of the /proc/serial file. + * + * Revision 1.46 2000/10/16 12:59:40 johana + * Added CONFIG_ETRAX_SERIAL_PROC_ENTRY for statistics and debug info. + * + * Revision 1.45 2000/10/13 17:10:59 pkj + * Do not flush DMAs while flipping TTY buffers. + * + * Revision 1.44 2000/10/13 16:34:29 pkj + * Added a delay in ser_interrupt() for 2.3ms when an error is detected. + * We do not know why this delay is required yet, but without it the + * irmaflash program does not work (this was the program that needed + * the ser_interrupt() to be needed in the first place). This should not + * affect normal use of the serial ports. + * + * Revision 1.43 2000/10/13 16:30:44 pkj + * New version of the fast flush of serial buffers code. This time + * it is localized to the serial driver and uses a fast timer to + * do the work. + * + * Revision 1.42 2000/10/13 14:54:26 bennyo + * Fix for switching RTS when using rs485 + * + * Revision 1.41 2000/10/12 11:43:44 pkj + * Cleaned up a number of comments. + * + * Revision 1.40 2000/10/10 11:58:39 johana + * Made RS485 support generic for all ports. + * Toggle rts in interrupt if no delay wanted. + * WARNING: No true transmitter empty check?? + * Set d_wait bit when sending data so interrupt is delayed until + * fifo flushed. (Fix tcdrain() problem) + * + * Revision 1.39 2000/10/04 16:08:02 bjornw + * * Use virt_to_phys etc. for DMA addresses + * * Removed CONFIG_FLUSH_DMA_FAST hacks + * * Indentation fix + * + * Revision 1.38 2000/10/02 12:27:10 mattias + * * added variable used when using fast flush on serial dma. + * (CONFIG_FLUSH_DMA_FAST) + * + * Revision 1.37 2000/09/27 09:44:24 pkj + * Uncomment definition of SERIAL_HANDLE_EARLY_ERRORS. + * + * Revision 1.36 2000/09/20 13:12:52 johana + * Support for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS: + * Number of timer ticks between flush of receive fifo (1 tick = 10ms). + * Try 0-3 for low latency applications. Approx 5 for high load + * applications (e.g. PPP). Maybe this should be more adaptive some day... + * + * Revision 1.35 2000/09/20 10:36:08 johana + * Typo in get_lsr_info() + * + * Revision 1.34 2000/09/20 10:29:59 johana + * Let rs_chars_in_buffer() check fifo content as well. + * get_lsr_info() might work now (not tested). + * Easier to change the port to debug. + * + * Revision 1.33 2000/09/13 07:52:11 torbjore + * Support RS485 + * + * Revision 1.32 2000/08/31 14:45:37 bjornw + * After sending a break we need to reset the transmit DMA channel + * + * Revision 1.31 2000/06/21 12:13:29 johana + * Fixed wait for all chars sent when closing port. + * (Used to always take 1 second!) + * Added shadows for directions of status/ctrl signals. + * + * Revision 1.30 2000/05/29 16:27:55 bjornw + * Simulator ifdef moved a bit + * + * Revision 1.29 2000/05/09 09:40:30 mattias + * * Added description of dma registers used in timeout_interrupt + * * Removed old code + * + * Revision 1.28 2000/05/08 16:38:58 mattias + * * Bugfix for flushing fifo in timeout_interrupt + * Problem occurs when bluetooth stack waits for a small number of bytes + * containing an event acknowledging free buffers in bluetooth HW + * As before, data was stuck in fifo until more data came on uart and + * flushed it up to the stack. + * + * Revision 1.27 2000/05/02 09:52:28 jonasd + * Added fix for peculiar etrax behaviour when eop is forced on an empty + * fifo. This is used when flashing the IRMA chip. Disabled by default. + * + * Revision 1.26 2000/03/29 15:32:02 bjornw + * 2.0.34 updates + * + * Revision 1.25 2000/02/16 16:59:36 bjornw + * * Receive DMA directly into the flip-buffer, eliminating an intermediary + * receive buffer and a memcpy. Will avoid some overruns. + * * Error message on debug port if an overrun or flip buffer overrun occurs. + * * Just use the first byte in the flag flip buffer for errors. + * * Check for timeout on the serial ports only each 5/100 s, not 1/100. + * + * Revision 1.24 2000/02/09 18:02:28 bjornw + * * Clear serial errors (overrun, framing, parity) correctly. Before, the + * receiver would get stuck if an error occurred and we did not restart + * the input DMA. + * * Cosmetics (indentation, some code made into inlines) + * * Some more debug options + * * Actually shut down the serial port (DMA irq, DMA reset, receiver stop) + * when the last open is closed. Corresponding fixes in startup(). + * * rs_close() "tx FIFO wait" code moved into right place, bug & -> && fixed + * and make a special case out of port 1 (R_DMA_CHx_STATUS is broken for that) + * * e100_disable_rx/enable_rx just disables/enables the receiver, not RTS + * + * Revision 1.23 2000/01/24 17:46:19 johana + * Wait for flush of DMA/FIFO when closing port. + * + * Revision 1.22 2000/01/20 18:10:23 johana + * Added TIOCMGET ioctl to return modem status. + * Implemented modem status/control that works with the extra signals + * (DTR, DSR, RI,CD) as well. + * 3 different modes supported: + * ser0 on PB (Bundy), ser1 on PB (Lisa) and ser2 on PA (Bundy) + * Fixed DEF_TX value that caused the serial transmitter pin (txd) to go to 0 when + * closing the last filehandle, NASTY!. + * Added break generation, not tested though! + * Use SA_SHIRQ when request_irq() for ser2 and ser3 (shared with) par0 and par1. + * You can't use them at the same time (yet..), but you can hopefully switch + * between ser2/par0, ser3/par1 with the same kernel config. + * Replaced some magic constants with defines + * + * + */ + +static char *serial_version = "$Revision: 1.25 $"; + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +/* non-arch dependent serial structures are in linux/serial.h */ +#include +/* while we keep our own stuff (struct e100_serial) in a local .h file */ +#include "serial.h" +#include + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +#ifndef CONFIG_ETRAX_FAST_TIMER +#error "Enable FAST_TIMER to use SERIAL_FAST_TIMER" +#endif +#endif + +#if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \ + (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0) +#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1" +#endif + +#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G) +#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G" +#endif + +/* + * All of the compatibilty code so we can compile serial.c against + * older kernels is hidden in serial_compat.h + */ +#if defined(LOCAL_HEADERS) +#include "serial_compat.h" +#endif + +#define _INLINE_ inline + +struct tty_driver *serial_driver; + +/* serial subtype definitions */ +#ifndef SERIAL_TYPE_NORMAL +#define SERIAL_TYPE_NORMAL 1 +#endif + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +//#define SERIAL_DEBUG_INTR +//#define SERIAL_DEBUG_OPEN +//#define SERIAL_DEBUG_FLOW +//#define SERIAL_DEBUG_DATA +//#define SERIAL_DEBUG_THROTTLE +//#define SERIAL_DEBUG_IO /* Debug for Extra control and status pins */ +//#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */ + +/* Enable this to use serial interrupts to handle when you + expect the first received event on the serial port to + be an error, break or similar. Used to be able to flash IRMA + from eLinux */ +#define SERIAL_HANDLE_EARLY_ERRORS + +/* Defined and used in n_tty.c, but we need it here as well */ +#define TTY_THRESHOLD_THROTTLE 128 + +/* Due to buffersizes and threshold values, our SERIAL_DESCR_BUF_SIZE + * must not be to high or flow control won't work if we leave it to the tty + * layer so we have our own throttling in flush_to_flip + * TTY_FLIPBUF_SIZE=512, + * TTY_THRESHOLD_THROTTLE/UNTHROTTLE=128 + * BUF_SIZE can't be > 128 + */ +/* Currently 16 descriptors x 128 bytes = 2048 bytes */ +#define SERIAL_DESCR_BUF_SIZE 256 + +#define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */ +#define DEF_BAUD_BASE SERIAL_PRESCALE_BASE + +/* We don't want to load the system with massive fast timer interrupt + * on high baudrates so limit it to 250 us (4kHz) */ +#define MIN_FLUSH_TIME_USEC 250 + +/* Add an x here to log a lot of timer stuff */ +#define TIMERD(x) +/* Debug details of interrupt handling */ +#define DINTR1(x) /* irq on/off, errors */ +#define DINTR2(x) /* tx and rx */ +/* Debug flip buffer stuff */ +#define DFLIP(x) +/* Debug flow control and overview of data flow */ +#define DFLOW(x) +#define DBAUD(x) +#define DLOG_INT_TRIG(x) + +//#define DEBUG_LOG_INCLUDED +#ifndef DEBUG_LOG_INCLUDED +#define DEBUG_LOG(line, string, value) +#else +struct debug_log_info +{ + unsigned long time; + unsigned long timer_data; +// int line; + const char *string; + int value; +}; +#define DEBUG_LOG_SIZE 4096 + +struct debug_log_info debug_log[DEBUG_LOG_SIZE]; +int debug_log_pos = 0; + +#define DEBUG_LOG(_line, _string, _value) do { \ + if ((_line) == SERIAL_DEBUG_LINE) {\ + debug_log_func(_line, _string, _value); \ + }\ +}while(0) + +void debug_log_func(int line, const char *string, int value) +{ + if (debug_log_pos < DEBUG_LOG_SIZE) { + debug_log[debug_log_pos].time = jiffies; + debug_log[debug_log_pos].timer_data = *R_TIMER_DATA; +// debug_log[debug_log_pos].line = line; + debug_log[debug_log_pos].string = string; + debug_log[debug_log_pos].value = value; + debug_log_pos++; + } + /*printk(string, value);*/ +} +#endif + +#ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS +/* Default number of timer ticks before flushing rx fifo + * When using "little data, low latency applications: use 0 + * When using "much data applications (PPP)" use ~5 + */ +#define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5 +#endif + +unsigned long timer_data_to_ns(unsigned long timer_data); + +static void change_speed(struct e100_serial *info); +static void rs_throttle(struct tty_struct * tty); +static void rs_wait_until_sent(struct tty_struct *tty, int timeout); +static int rs_write(struct tty_struct * tty, int from_user, + const unsigned char *buf, int count); +extern _INLINE_ int rs_raw_write(struct tty_struct * tty, int from_user, + const unsigned char *buf, int count); +#ifdef CONFIG_ETRAX_RS485 +static int e100_write_rs485(struct tty_struct * tty, int from_user, + const unsigned char *buf, int count); +#endif +static int get_lsr_info(struct e100_serial * info, unsigned int *value); + + +#define DEF_BAUD 115200 /* 115.2 kbit/s */ +#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) +#define DEF_RX 0x20 /* or SERIAL_CTRL_W >> 8 */ +/* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */ +#define DEF_TX 0x80 /* or SERIAL_CTRL_B */ + +/* offsets from R_SERIALx_CTRL */ + +#define REG_DATA 0 +#define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */ +#define REG_TR_DATA 0 +#define REG_STATUS 1 +#define REG_TR_CTRL 1 +#define REG_REC_CTRL 2 +#define REG_BAUD 3 +#define REG_XOFF 4 /* this is a 32 bit register */ + +/* The bitfields are the same for all serial ports */ +#define SER_RXD_MASK IO_MASK(R_SERIAL0_STATUS, rxd) +#define SER_DATA_AVAIL_MASK IO_MASK(R_SERIAL0_STATUS, data_avail) +#define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err) +#define SER_PAR_ERR_MASK IO_MASK(R_SERIAL0_STATUS, par_err) +#define SER_OVERRUN_MASK IO_MASK(R_SERIAL0_STATUS, overrun) + +#define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK) + +/* Values for info->errorcode */ +#define ERRCODE_SET_BREAK (TTY_BREAK) +#define ERRCODE_INSERT 0x100 +#define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK) + +#define FORCE_EOP(info) *R_SET_EOP = 1U << info->iseteop; + +/* + * General note regarding the use of IO_* macros in this file: + * + * We will use the bits defined for DMA channel 6 when using various + * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are + * the same for all channels (which of course they are). + * + * We will also use the bits defined for serial port 0 when writing commands + * to the different ports, as these bits too are the same for all ports. + */ + + +/* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */ +static const unsigned long e100_ser_int_mask = 0 +#ifdef CONFIG_ETRAX_SERIAL_PORT0 +| IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready) +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT1 +| IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready) +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT2 +| IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready) +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT3 +| IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready) +#endif +; +unsigned long r_alt_ser_baudrate_shadow = 0; + +/* this is the data for the four serial ports in the etrax100 */ +/* DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */ +/* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */ + +static struct e100_serial rs_table[] = { + { .baud = DEF_BAUD, + .port = (unsigned char *)R_SERIAL0_CTRL, + .irq = 1U << 12, /* uses DMA 6 and 7 */ + .oclrintradr = R_DMA_CH6_CLR_INTR, + .ofirstadr = R_DMA_CH6_FIRST, + .ocmdadr = R_DMA_CH6_CMD, + .ostatusadr = R_DMA_CH6_STATUS, + .iclrintradr = R_DMA_CH7_CLR_INTR, + .ifirstadr = R_DMA_CH7_FIRST, + .icmdadr = R_DMA_CH7_CMD, + .idescradr = R_DMA_CH7_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 2, +#ifdef CONFIG_ETRAX_SERIAL_PORT0 + .enabled = 1, +#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT + .dma_out_enabled = 1, +#else + .dma_out_enabled = 0, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN + .dma_in_enabled = 1, +#else + .dma_in_enabled = 0 +#endif +#else + .enabled = 0, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif + +}, /* ttyS0 */ +#ifndef CONFIG_SVINTO_SIM + { .baud = DEF_BAUD, + .port = (unsigned char *)R_SERIAL1_CTRL, + .irq = 1U << 16, /* uses DMA 8 and 9 */ + .oclrintradr = R_DMA_CH8_CLR_INTR, + .ofirstadr = R_DMA_CH8_FIRST, + .ocmdadr = R_DMA_CH8_CMD, + .ostatusadr = R_DMA_CH8_STATUS, + .iclrintradr = R_DMA_CH9_CLR_INTR, + .ifirstadr = R_DMA_CH9_FIRST, + .icmdadr = R_DMA_CH9_CMD, + .idescradr = R_DMA_CH9_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 3, +#ifdef CONFIG_ETRAX_SERIAL_PORT1 + .enabled = 1, +#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT + .dma_out_enabled = 1, +#else + .dma_out_enabled = 0, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN + .dma_in_enabled = 1, +#else + .dma_in_enabled = 0 +#endif +#else + .enabled = 0, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif +}, /* ttyS1 */ + + { .baud = DEF_BAUD, + .port = (unsigned char *)R_SERIAL2_CTRL, + .irq = 1U << 4, /* uses DMA 2 and 3 */ + .oclrintradr = R_DMA_CH2_CLR_INTR, + .ofirstadr = R_DMA_CH2_FIRST, + .ocmdadr = R_DMA_CH2_CMD, + .ostatusadr = R_DMA_CH2_STATUS, + .iclrintradr = R_DMA_CH3_CLR_INTR, + .ifirstadr = R_DMA_CH3_FIRST, + .icmdadr = R_DMA_CH3_CMD, + .idescradr = R_DMA_CH3_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 0, +#ifdef CONFIG_ETRAX_SERIAL_PORT2 + .enabled = 1, +#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT + .dma_out_enabled = 1, +#else + .dma_out_enabled = 0, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN + .dma_in_enabled = 1, +#else + .dma_in_enabled = 0 +#endif +#else + .enabled = 0, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif + }, /* ttyS2 */ + + { .baud = DEF_BAUD, + .port = (unsigned char *)R_SERIAL3_CTRL, + .irq = 1U << 8, /* uses DMA 4 and 5 */ + .oclrintradr = R_DMA_CH4_CLR_INTR, + .ofirstadr = R_DMA_CH4_FIRST, + .ocmdadr = R_DMA_CH4_CMD, + .ostatusadr = R_DMA_CH4_STATUS, + .iclrintradr = R_DMA_CH5_CLR_INTR, + .ifirstadr = R_DMA_CH5_FIRST, + .icmdadr = R_DMA_CH5_CMD, + .idescradr = R_DMA_CH5_DESCR, + .flags = STD_FLAGS, + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 1, +#ifdef CONFIG_ETRAX_SERIAL_PORT3 + .enabled = 1, +#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT + .dma_out_enabled = 1, +#else + .dma_out_enabled = 0, +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN + .dma_in_enabled = 1, +#else + .dma_in_enabled = 0 +#endif +#else + .enabled = 0, + .dma_out_enabled = 0, + .dma_in_enabled = 0 +#endif + } /* ttyS3 */ +#endif +}; + + +#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) + +static struct termios *serial_termios[NR_PORTS]; +static struct termios *serial_termios_locked[NR_PORTS]; +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +static struct fast_timer fast_timers[NR_PORTS]; +#endif + +#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY +#define PROCSTAT(x) x +struct ser_statistics_type { + int overrun_cnt; + int early_errors_cnt; + int ser_ints_ok_cnt; + int errors_cnt; + unsigned long int processing_flip; + unsigned long processing_flip_still_room; + unsigned long int timeout_flush_cnt; + int rx_dma_ints; + int tx_dma_ints; + int rx_tot; + int tx_tot; +}; + +static struct ser_statistics_type ser_stat[NR_PORTS]; + +#else + +#define PROCSTAT(x) + +#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */ + +/* RS-485 */ +#if defined(CONFIG_ETRAX_RS485) +#ifdef CONFIG_ETRAX_FAST_TIMER +static struct fast_timer fast_timers_rs485[NR_PORTS]; +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PA) +static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT; +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) +static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT; +#endif +#endif + +/* Info and macros needed for each ports extra control/status signals. */ +#define E100_STRUCT_PORT(line, pinname) \ + ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ + (R_PORT_PA_DATA): ( \ + (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ + (R_PORT_PB_DATA):&dummy_ser[line])) + +#define E100_STRUCT_SHADOW(line, pinname) \ + ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ + (&port_pa_data_shadow): ( \ + (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \ + (&port_pb_data_shadow):&dummy_ser[line])) +#define E100_STRUCT_MASK(line, pinname) \ + ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \ + (1<= 0)? \ + (1< 3.3V to RS-232 driver -> -12V on RS-232 level + * inactive = 1 -> 0V to RS-232 driver -> +12V on RS-232 level + * + * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip + */ + +/* Output */ +#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK) +/* Input */ +#define E100_CTS_GET(info) ((info)->port[REG_STATUS] & E100_CTS_MASK) + +/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */ +/* Is an output */ +#define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask) + +/* Normally inputs */ +#define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask) +#define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask) + +/* Input */ +#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask) + + +/* + * tmp_buf is used as a temporary buffer by serial_write. We need to + * lock it in case the memcpy_fromfs blocks while swapping in a page, + * and some other program tries to do a serial write at the same time. + * Since the lock will only come under contention when the system is + * swapping and available memory is low, it makes sense to share one + * buffer across all the serial ports, since it significantly saves + * memory if large numbers of serial ports are open. + */ +static unsigned char *tmp_buf; +#ifdef DECLARE_MUTEX +static DECLARE_MUTEX(tmp_buf_sem); +#else +static struct semaphore tmp_buf_sem = MUTEX; +#endif + +/* Calculate the chartime depending on baudrate, numbor of bits etc. */ +static void update_char_time(struct e100_serial * info) +{ + tcflag_t cflags = info->tty->termios->c_cflag; + int bits; + + /* calc. number of bits / data byte */ + /* databits + startbit and 1 stopbit */ + if ((cflags & CSIZE) == CS7) + bits = 9; + else + bits = 10; + + if (cflags & CSTOPB) /* 2 stopbits ? */ + bits++; + + if (cflags & PARENB) /* parity bit ? */ + bits++; + + /* calc timeout */ + info->char_time_usec = ((bits * 1000000) / info->baud) + 1; + info->flush_time_usec = 4*info->char_time_usec; + if (info->flush_time_usec < MIN_FLUSH_TIME_USEC) + info->flush_time_usec = MIN_FLUSH_TIME_USEC; + +} + +/* + * This function maps from the Bxxxx defines in asm/termbits.h into real + * baud rates. + */ + +static int +cflag_to_baud(unsigned int cflag) +{ + static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, + 4800, 9600, 19200, 38400 }; + + static int ext_baud_table[] = { + 0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000, + 0, 0, 0, 0, 0, 0, 0, 0 }; + + if (cflag & CBAUDEX) + return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; + else + return baud_table[cflag & CBAUD]; +} + +/* and this maps to an etrax100 hardware baud constant */ + +static unsigned char +cflag_to_etrax_baud(unsigned int cflag) +{ + char retval; + + static char baud_table[] = { + -1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 }; + + static char ext_baud_table[] = { + -1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 }; + + if (cflag & CBAUDEX) + retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX]; + else + retval = baud_table[cflag & CBAUD]; + + if (retval < 0) { + printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag); + retval = 5; /* choose default 9600 instead */ + } + + return retval | (retval << 4); /* choose same for both TX and RX */ +} + + +/* Various static support functions */ + +/* Functions to set or clear DTR/RTS on the requested line */ +/* It is complicated by the fact that RTS is a serial port register, while + * DTR might not be implemented in the HW at all, and if it is, it can be on + * any general port. + */ + + +static inline void +e100_dtr(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + unsigned char mask = e100_modem_pins[info->line].dtr_mask; + +#ifdef SERIAL_DEBUG_IO + printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask); + printk("ser%i shadow before 0x%02X get: %i\n", + info->line, *e100_modem_pins[info->line].dtr_shadow, + E100_DTR_GET(info)); +#endif + /* DTR is active low */ + { + unsigned long flags; + + save_flags(flags); + cli(); + *e100_modem_pins[info->line].dtr_shadow &= ~mask; + *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow; + restore_flags(flags); + } + +#ifdef SERIAL_DEBUG_IO + printk("ser%i shadow after 0x%02X get: %i\n", + info->line, *e100_modem_pins[info->line].dtr_shadow, + E100_DTR_GET(info)); +#endif +#endif +} + +/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive + * 0=0V , 1=3.3V + */ +static inline void +e100_rts(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + unsigned long flags; + save_flags(flags); + cli(); + info->rx_ctrl &= ~E100_RTS_MASK; + info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ + info->port[REG_REC_CTRL] = info->rx_ctrl; + restore_flags(flags); +#ifdef SERIAL_DEBUG_IO + printk("ser%i rts %i\n", info->line, set); +#endif +#endif +} + + +/* If this behaves as a modem, RI and CD is an output */ +static inline void +e100_ri_out(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + /* RI is active low */ + { + unsigned char mask = e100_modem_pins[info->line].ri_mask; + unsigned long flags; + + save_flags(flags); + cli(); + *e100_modem_pins[info->line].ri_shadow &= ~mask; + *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; + restore_flags(flags); + } +#endif +} +static inline void +e100_cd_out(struct e100_serial *info, int set) +{ +#ifndef CONFIG_SVINTO_SIM + /* CD is active low */ + { + unsigned char mask = e100_modem_pins[info->line].cd_mask; + unsigned long flags; + + save_flags(flags); + cli(); + *e100_modem_pins[info->line].cd_shadow &= ~mask; + *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; + restore_flags(flags); + } +#endif +} + +static inline void +e100_disable_rx(struct e100_serial *info) +{ +#ifndef CONFIG_SVINTO_SIM + /* disable the receiver */ + info->port[REG_REC_CTRL] = + (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); +#endif +} + +static inline void +e100_enable_rx(struct e100_serial *info) +{ +#ifndef CONFIG_SVINTO_SIM + /* enable the receiver */ + info->port[REG_REC_CTRL] = + (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable)); +#endif +} + +/* the rx DMA uses both the dma_descr and the dma_eop interrupts */ + +static inline void +e100_disable_rxdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("rxdma_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line)); + *R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3); +} + +static inline void +e100_enable_rxdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("rxdma_irq(%d): 1\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line)); + *R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3); +} + +/* the tx DMA uses only dma_descr interrupt */ + +static _INLINE_ void +e100_disable_txdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("txdma_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line)); + *R_IRQ_MASK2_CLR = info->irq; +} + +static _INLINE_ void +e100_enable_txdma_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("txdma_irq(%d): 1\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line)); + *R_IRQ_MASK2_SET = info->irq; +} + +static _INLINE_ void +e100_disable_txdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + /* Disable output DMA channel for the serial port in question + * ( set to something other then serialX) + */ + save_flags(flags); + cli(); + DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); + if (info->line == 0) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) == + IO_STATE(R_GEN_CONFIG, dma6, serial0)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused); + } + } else if (info->line == 1) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) == + IO_STATE(R_GEN_CONFIG, dma8, serial1)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb); + } + } else if (info->line == 2) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) == + IO_STATE(R_GEN_CONFIG, dma2, serial2)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0); + } + } else if (info->line == 3) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) == + IO_STATE(R_GEN_CONFIG, dma4, serial3)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1); + } + } + *R_GEN_CONFIG = genconfig_shadow; + restore_flags(flags); +} + + +static _INLINE_ void +e100_enable_txdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + save_flags(flags); + cli(); + DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line)); + /* Enable output DMA channel for the serial port in question */ + if (info->line == 0) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0); + } else if (info->line == 1) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1); + } else if (info->line == 2) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2); + } else if (info->line == 3) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3); + } + *R_GEN_CONFIG = genconfig_shadow; + restore_flags(flags); +} + +static _INLINE_ void +e100_disable_rxdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + /* Disable input DMA channel for the serial port in question + * ( set to something other then serialX) + */ + save_flags(flags); + cli(); + if (info->line == 0) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) == + IO_STATE(R_GEN_CONFIG, dma7, serial0)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused); + } + } else if (info->line == 1) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) == + IO_STATE(R_GEN_CONFIG, dma9, serial1)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb); + } + } else if (info->line == 2) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) == + IO_STATE(R_GEN_CONFIG, dma3, serial2)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0); + } + } else if (info->line == 3) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) == + IO_STATE(R_GEN_CONFIG, dma5, serial3)) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1); + } + } + *R_GEN_CONFIG = genconfig_shadow; + restore_flags(flags); +} + + +static _INLINE_ void +e100_enable_rxdma_channel(struct e100_serial *info) +{ + unsigned long flags; + + save_flags(flags); + cli(); + /* Enable input DMA channel for the serial port in question */ + if (info->line == 0) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0); + } else if (info->line == 1) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1); + } else if (info->line == 2) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2); + } else if (info->line == 3) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5); + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3); + } + *R_GEN_CONFIG = genconfig_shadow; + restore_flags(flags); +} + +#ifdef SERIAL_HANDLE_EARLY_ERRORS +/* in order to detect and fix errors on the first byte + we have to use the serial interrupts as well. */ + +static inline void +e100_disable_serial_data_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line)); + *R_IRQ_MASK1_CLR = (1U << (8+2*info->line)); +} + +static inline void +e100_enable_serial_data_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_irq(%d): 1\n",info->line); + printk("**** %d = %d\n", + (8+2*info->line), + (1U << (8+2*info->line))); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line)); + *R_IRQ_MASK1_SET = (1U << (8+2*info->line)); +} +#endif + +static inline void +e100_disable_serial_tx_ready_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_tx_irq(%d): 0\n",info->line); +#endif + DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line)); + *R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line)); +} + +static inline void +e100_enable_serial_tx_ready_irq(struct e100_serial *info) +{ +#ifdef SERIAL_DEBUG_INTR + printk("ser_tx_irq(%d): 1\n",info->line); + printk("**** %d = %d\n", + (8+1+2*info->line), + (1U << (8+1+2*info->line))); +#endif + DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line)); + *R_IRQ_MASK1_SET = (1U << (8+1+2*info->line)); +} + +static inline void e100_enable_rx_irq(struct e100_serial *info) +{ + if (info->uses_dma_in) + e100_enable_rxdma_irq(info); + else + e100_enable_serial_data_irq(info); +} +static inline void e100_disable_rx_irq(struct e100_serial *info) +{ + if (info->uses_dma_in) + e100_disable_rxdma_irq(info); + else + e100_disable_serial_data_irq(info); +} + +#if defined(CONFIG_ETRAX_RS485) +/* Enable RS-485 mode on selected port. This is UGLY. */ +static int +e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + +#if defined(CONFIG_ETRAX_RS485_ON_PA) + *R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit); +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + rs485_port_g_bit, 1); +#endif +#if defined(CONFIG_ETRAX_RS485_LTC1387) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1); + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1); +#endif + + info->rs485.rts_on_send = 0x01 & r->rts_on_send; + info->rs485.rts_after_sent = 0x01 & r->rts_after_sent; + if (r->delay_rts_before_send >= 1000) + info->rs485.delay_rts_before_send = 1000; + else + info->rs485.delay_rts_before_send = r->delay_rts_before_send; + info->rs485.enabled = r->enabled; +/* printk("rts: on send = %i, after = %i, enabled = %i", + info->rs485.rts_on_send, + info->rs485.rts_after_sent, + info->rs485.enabled + ); +*/ + return 0; +} + +static int +e100_write_rs485(struct tty_struct *tty, int from_user, + const unsigned char *buf, int count) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + int old_enabled = info->rs485.enabled; + + /* rs485 is always implicitly enabled if we're using the ioctl() + * but it doesn't have to be set in the rs485_control + * (to be backward compatible with old apps) + * So we store, set and restore it. + */ + info->rs485.enabled = 1; + /* rs_write now deals with RS485 if enabled */ + count = rs_write(tty, from_user, buf, count); + info->rs485.enabled = old_enabled; + return count; +} + +#ifdef CONFIG_ETRAX_FAST_TIMER +/* Timer function to toggle RTS when using FAST_TIMER */ +static void rs485_toggle_rts_timer_function(unsigned long data) +{ + struct e100_serial *info = (struct e100_serial *)data; + + fast_timers_rs485[info->line].function = NULL; + e100_rts(info, info->rs485.rts_after_sent); +#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) + e100_enable_rx(info); + e100_enable_rx_irq(info); +#endif +} +#endif +#endif /* CONFIG_ETRAX_RS485 */ + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter using the XOFF registers, as necessary. + * ------------------------------------------------------------ + */ + +static void +rs_stop(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + if (info) { + unsigned long flags; + unsigned long xoff; + + save_flags(flags); cli(); + DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n", + CIRC_CNT(info->xmit.head, + info->xmit.tail,SERIAL_XMIT_SIZE))); + + xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->tty)); + xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop); + if (tty->termios->c_iflag & IXON ) { + xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); + } + + *((unsigned long *)&info->port[REG_XOFF]) = xoff; + restore_flags(flags); + } +} + +static void +rs_start(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + if (info) { + unsigned long flags; + unsigned long xoff; + + save_flags(flags); cli(); + DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n", + CIRC_CNT(info->xmit.head, + info->xmit.tail,SERIAL_XMIT_SIZE))); + xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty)); + xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); + if (tty->termios->c_iflag & IXON ) { + xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); + } + + *((unsigned long *)&info->port[REG_XOFF]) = xoff; + if (!info->uses_dma_out && + info->xmit.head != info->xmit.tail && info->xmit.buf) + e100_enable_serial_tx_ready_irq(info); + + restore_flags(flags); + } +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * rs_interrupt(). They were separated out for readability's sake. + * + * Note: rs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * rs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +/* + * This routine is used by the interrupt handler to schedule + * processing in the software interrupt portion of the driver. + */ +static _INLINE_ void +rs_sched_event(struct e100_serial *info, + int event) +{ + if (info->event & (1 << event)) + return; + info->event |= 1 << event; + schedule_work(&info->work); +} + +/* The output DMA channel is free - use it to send as many chars as possible + * NOTES: + * We don't pay attention to info->x_char, which means if the TTY wants to + * use XON/XOFF it will set info->x_char but we won't send any X char! + * + * To implement this, we'd just start a DMA send of 1 byte pointing at a + * buffer containing the X char, and skip updating xmit. We'd also have to + * check if the last sent char was the X char when we enter this function + * the next time, to avoid updating xmit with the sent X value. + */ + +static void +transmit_chars_dma(struct e100_serial *info) +{ + unsigned int c, sentl; + struct etrax_dma_descr *descr; + +#ifdef CONFIG_SVINTO_SIM + /* This will output too little if tail is not 0 always since + * we don't reloop to send the other part. Anyway this SHOULD be a + * no-op - transmit_chars_dma would never really be called during sim + * since rs_write does not write into the xmit buffer then. + */ + if (info->xmit.tail) + printk("Error in serial.c:transmit_chars-dma(), tail!=0\n"); + if (info->xmit.head != info->xmit.tail) { + SIMCOUT(info->xmit.buf + info->xmit.tail, + CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE)); + info->xmit.head = info->xmit.tail; /* move back head */ + info->tr_running = 0; + } + return; +#endif + /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ + *info->oclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + +#ifdef SERIAL_DEBUG_INTR + if (info->line == SERIAL_DEBUG_LINE) + printk("tc\n"); +#endif + if (!info->tr_running) { + /* weirdo... we shouldn't get here! */ + printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n"); + return; + } + + descr = &info->tr_descr; + + /* first get the amount of bytes sent during the last DMA transfer, + and update xmit accordingly */ + + /* if the stop bit was not set, all data has been sent */ + if (!(descr->status & d_stop)) { + sentl = descr->sw_len; + } else + /* otherwise we find the amount of data sent here */ + sentl = descr->hw_len; + + DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl)); + + /* update stats */ + info->icount.tx += sentl; + + /* update xmit buffer */ + info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1); + + /* if there is only a few chars left in the buf, wake up the blocked + write if any */ + if (CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE) < WAKEUP_CHARS) + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + + /* find out the largest amount of consecutive bytes we want to send now */ + + c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); + + /* Don't send all in one DMA transfer - divide it so we wake up + * application before all is sent + */ + + if (c >= 4*WAKEUP_CHARS) + c = c/2; + + if (c <= 0) { + /* our job here is done, don't schedule any new DMA transfer */ + info->tr_running = 0; + +#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) + if (info->rs485.enabled) { + /* Set a short timer to toggle RTS */ + start_one_shot_timer(&fast_timers_rs485[info->line], + rs485_toggle_rts_timer_function, + (unsigned long)info, + info->char_time_usec*2, + "RS-485"); + } +#endif /* RS485 */ + return; + } + + /* ok we can schedule a dma send of c chars starting at info->xmit.tail */ + /* set up the descriptor correctly for output */ + DFLOW(DEBUG_LOG(info->line, "TX %i\n", c)); + descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */ + descr->sw_len = c; + descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail); + descr->status = 0; + + *info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */ + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); + + /* DMA is now running (hopefully) */ +} /* transmit_chars_dma */ + +static void +start_transmit(struct e100_serial *info) +{ +#if 0 + if (info->line == SERIAL_DEBUG_LINE) + printk("x\n"); +#endif + + info->tr_descr.sw_len = 0; + info->tr_descr.hw_len = 0; + info->tr_descr.status = 0; + info->tr_running = 1; + if (info->uses_dma_out) + transmit_chars_dma(info); + else + e100_enable_serial_tx_ready_irq(info); +} /* start_transmit */ + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +static int serial_fast_timer_started = 0; +static int serial_fast_timer_expired = 0; +static void flush_timeout_function(unsigned long data); +#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\ + unsigned long timer_flags; \ + save_flags(timer_flags); \ + cli(); \ + if (fast_timers[info->line].function == NULL) { \ + serial_fast_timer_started++; \ + TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \ + TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \ + start_one_shot_timer(&fast_timers[info->line], \ + flush_timeout_function, \ + (unsigned long)info, \ + (usec), \ + string); \ + } \ + else { \ + TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \ + } \ + restore_flags(timer_flags); \ +} +#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec) + +#else +#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) +#define START_FLUSH_FAST_TIMER(info, string) +#endif + +static struct etrax_recv_buffer * +alloc_recv_buffer(unsigned int size) +{ + struct etrax_recv_buffer *buffer; + + if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC))) + return NULL; + + buffer->next = NULL; + buffer->length = 0; + buffer->error = TTY_NORMAL; + + return buffer; +} + +static void +append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer) +{ + unsigned long flags; + + save_flags(flags); + cli(); + + if (!info->first_recv_buffer) + info->first_recv_buffer = buffer; + else + info->last_recv_buffer->next = buffer; + + info->last_recv_buffer = buffer; + + info->recv_cnt += buffer->length; + if (info->recv_cnt > info->max_recv_cnt) + info->max_recv_cnt = info->recv_cnt; + + restore_flags(flags); +} + +static int +add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag) +{ + struct etrax_recv_buffer *buffer; + if (info->uses_dma_in) { + if (!(buffer = alloc_recv_buffer(4))) + return 0; + + buffer->length = 1; + buffer->error = flag; + buffer->buffer[0] = data; + + append_recv_buffer(info, buffer); + + info->icount.rx++; + } else { + struct tty_struct *tty = info->tty; + *tty->flip.char_buf_ptr = data; + *tty->flip.flag_buf_ptr = flag; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + info->icount.rx++; + } + + return 1; +} + +extern _INLINE_ unsigned int +handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsigned int recvl) +{ + struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer; + + if (info->recv_cnt + recvl > 65536) { + printk(KERN_CRIT + "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __FUNCTION__, recvl); + return 0; + } + + buffer->length = recvl; + + if (info->errorcode == ERRCODE_SET_BREAK) + buffer->error = TTY_BREAK; + info->errorcode = 0; + + append_recv_buffer(info, buffer); + + if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) + panic("%s: Failed to allocate memory for receive buffer!\n", __FUNCTION__); + + descr->buf = virt_to_phys(buffer->buffer); + + return recvl; +} + +static _INLINE_ unsigned int +handle_all_descr_data(struct e100_serial *info) +{ + struct etrax_dma_descr *descr; + unsigned int recvl; + unsigned int ret = 0; + + while (1) + { + descr = &info->rec_descr[info->cur_rec_descr]; + + if (descr == phys_to_virt(*info->idescradr)) + break; + + if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS) + info->cur_rec_descr = 0; + + /* find out how many bytes were read */ + + /* if the eop bit was not set, all data has been received */ + if (!(descr->status & d_eop)) { + recvl = descr->sw_len; + } else { + /* otherwise we find the amount of data received here */ + recvl = descr->hw_len; + } + + /* Reset the status information */ + descr->status = 0; + + DFLOW( DEBUG_LOG(info->line, "RX %lu\n", recvl); + if (info->tty->stopped) { + unsigned char *buf = phys_to_virt(descr->buf); + DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]); + DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]); + DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]); + } + ); + + /* update stats */ + info->icount.rx += recvl; + + ret += handle_descr_data(info, descr, recvl); + } + + return ret; +} + +static _INLINE_ void +receive_chars_dma(struct e100_serial *info) +{ + struct tty_struct *tty; + unsigned char rstat; + +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + return; +#endif + + /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */ + *info->iclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + + tty = info->tty; + if (!tty) /* Something wrong... */ + return; + +#ifdef SERIAL_HANDLE_EARLY_ERRORS + if (info->uses_dma_in) + e100_enable_serial_data_irq(info); +#endif + + if (info->errorcode == ERRCODE_INSERT_BREAK) + add_char_and_flag(info, '\0', TTY_BREAK); + + handle_all_descr_data(info); + + /* Read the status register to detect errors */ + rstat = info->port[REG_STATUS]; + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { + DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat)); + } + + if (rstat & SER_ERROR_MASK) { + /* If we got an error, we must reset it by reading the + * data_in field + */ + unsigned char data = info->port[REG_DATA]; + + PROCSTAT(ser_stat[info->line].errors_cnt++); + DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", + ((rstat & SER_ERROR_MASK) << 8) | data); + + if (rstat & SER_PAR_ERR_MASK) + add_char_and_flag(info, data, TTY_PARITY); + else if (rstat & SER_OVERRUN_MASK) + add_char_and_flag(info, data, TTY_OVERRUN); + else if (rstat & SER_FRAMING_ERR_MASK) + add_char_and_flag(info, data, TTY_FRAME); + } + + START_FLUSH_FAST_TIMER(info, "receive_chars"); + + /* Restart the receiving DMA */ + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); +} + +static _INLINE_ int +start_recv_dma(struct e100_serial *info) +{ + struct etrax_dma_descr *descr = info->rec_descr; + struct etrax_recv_buffer *buffer; + int i; + + /* Set up the receiving descriptors */ + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { + if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) + panic("%s: Failed to allocate memory for receive buffer!\n", __FUNCTION__); + + descr[i].ctrl = d_int; + descr[i].buf = virt_to_phys(buffer->buffer); + descr[i].sw_len = SERIAL_DESCR_BUF_SIZE; + descr[i].hw_len = 0; + descr[i].status = 0; + descr[i].next = virt_to_phys(&descr[i+1]); + } + + /* Link the last descriptor to the first */ + descr[i-1].next = virt_to_phys(&descr[0]); + + /* Start with the first descriptor in the list */ + info->cur_rec_descr = 0; + + /* Start the DMA */ + *info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]); + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start); + + /* Input DMA should be running now */ + return 1; +} + +static void +start_receive(struct e100_serial *info) +{ +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + return; +#endif + info->tty->flip.count = 0; + if (info->uses_dma_in) { + /* reset the input dma channel to be sure it works */ + + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + + start_recv_dma(info); + } +} + + +static _INLINE_ void +status_handle(struct e100_serial *info, unsigned short status) +{ +} + +/* the bits in the MASK2 register are laid out like this: + DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR + where I is the input channel and O is the output channel for the port. + info->irq is the bit number for the DMAO_DESCR so to check the others we + shift info->irq to the left. +*/ + +/* dma output channel interrupt handler + this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or + DMA8(ser1) when they have finished a descriptor with the intr flag set. +*/ + +static irqreturn_t +tr_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct e100_serial *info; + unsigned long ireg; + int i; + int handled = 0; + +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + { + const char *s = "What? tr_interrupt in simulator??\n"; + SIMCOUT(s,strlen(s)); + } + return IRQ_HANDLED; +#endif + + /* find out the line that caused this irq and get it from rs_table */ + + ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ + + for (i = 0; i < NR_PORTS; i++) { + info = rs_table + i; + if (!info->enabled || !info->uses_dma_out) + continue; + /* check for dma_descr (don't need to check for dma_eop in output dma for serial */ + if (ireg & info->irq) { + handled = 1; + /* we can send a new dma bunch. make it so. */ + DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i)); + /* Read jiffies_usec first, + * we want this time to be as late as possible + */ + PROCSTAT(ser_stat[info->line].tx_dma_ints++); + info->last_tx_active_usec = GET_JIFFIES_USEC(); + info->last_tx_active = jiffies; + transmit_chars_dma(info); + } + + /* FIXME: here we should really check for a change in the + status lines and if so call status_handle(info) */ + } + return IRQ_RETVAL(handled); +} /* tr_interrupt */ + +/* dma input channel interrupt handler */ + +static irqreturn_t +rec_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct e100_serial *info; + unsigned long ireg; + int i; + int handled = 0; + +#ifdef CONFIG_SVINTO_SIM + /* No receive in the simulator. Will probably be when the rest of + * the serial interface works, and this piece will just be removed. + */ + { + const char *s = "What? rec_interrupt in simulator??\n"; + SIMCOUT(s,strlen(s)); + } + return IRQ_HANDLED; +#endif + + /* find out the line that caused this irq and get it from rs_table */ + + ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */ + + for (i = 0; i < NR_PORTS; i++) { + info = rs_table + i; + if (!info->enabled || !info->uses_dma_in) + continue; + /* check for both dma_eop and dma_descr for the input dma channel */ + if (ireg & ((info->irq << 2) | (info->irq << 3))) { + handled = 1; + /* we have received something */ + receive_chars_dma(info); + } + + /* FIXME: here we should really check for a change in the + status lines and if so call status_handle(info) */ + } + return IRQ_RETVAL(handled); +} /* rec_interrupt */ + +static _INLINE_ int +force_eop_if_needed(struct e100_serial *info) +{ + /* We check data_avail bit to determine if data has + * arrived since last time + */ + unsigned char rstat = info->port[REG_STATUS]; + + /* error or datavail? */ + if (rstat & SER_ERROR_MASK) { + /* Some error has occurred. If there has been valid data, an + * EOP interrupt will be made automatically. If no data, the + * normal ser_interrupt should be enabled and handle it. + * So do nothing! + */ + DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n", + rstat | (info->line << 8)); + return 0; + } + + if (rstat & SER_DATA_AVAIL_MASK) { + /* Ok data, no error, count it */ + TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n", + rstat | (info->line << 8))); + /* Read data to clear status flags */ + (void)info->port[REG_DATA]; + + info->forced_eop = 0; + START_FLUSH_FAST_TIMER(info, "magic"); + return 0; + } + + /* hit the timeout, force an EOP for the input + * dma channel if we haven't already + */ + if (!info->forced_eop) { + info->forced_eop = 1; + PROCSTAT(ser_stat[info->line].timeout_flush_cnt++); + TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line)); + FORCE_EOP(info); + } + + return 1; +} + +extern _INLINE_ void +flush_to_flip_buffer(struct e100_serial *info) +{ + struct tty_struct *tty; + struct etrax_recv_buffer *buffer; + unsigned int length; + unsigned long flags; + int max_flip_size; + + if (!info->first_recv_buffer) + return; + + save_flags(flags); + cli(); + + if (!(tty = info->tty)) { + restore_flags(flags); + return; + } + + length = tty->flip.count; + /* Don't flip more than the ldisc has room for. + * The return value from ldisc.receive_room(tty) - might not be up to + * date, the previous flip of up to TTY_FLIPBUF_SIZE might be on the + * processed and not accounted for yet. + * Since we use DMA, 1 SERIAL_DESCR_BUF_SIZE could be on the way. + * Lets buffer data here and let flow control take care of it. + * Since we normally flip large chunks, the ldisc don't react + * with throttle until too late if we flip to much. + */ + max_flip_size = tty->ldisc.receive_room(tty); + if (max_flip_size < 0) + max_flip_size = 0; + if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */ + length + info->recv_cnt + /* We have this queued */ + 2*SERIAL_DESCR_BUF_SIZE + /* This could be on the way */ + TTY_THRESHOLD_THROTTLE)) { /* Some slack */ + /* check TTY_THROTTLED first so it indicates our state */ + if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) { + DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles room %lu\n", max_flip_size)); + rs_throttle(tty); + } +#if 0 + else if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */ + length + info->recv_cnt + /* We have this queued */ + SERIAL_DESCR_BUF_SIZE + /* This could be on the way */ + TTY_THRESHOLD_THROTTLE)) { /* Some slack */ + DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles again! %lu\n", max_flip_size)); + rs_throttle(tty); + } +#endif + } + + if (max_flip_size > TTY_FLIPBUF_SIZE) + max_flip_size = TTY_FLIPBUF_SIZE; + + while ((buffer = info->first_recv_buffer) && length < max_flip_size) { + unsigned int count = buffer->length; + + if (length + count > max_flip_size) + count = max_flip_size - length; + + memcpy(tty->flip.char_buf_ptr + length, buffer->buffer, count); + memset(tty->flip.flag_buf_ptr + length, TTY_NORMAL, count); + tty->flip.flag_buf_ptr[length] = buffer->error; + + length += count; + info->recv_cnt -= count; + DFLIP(DEBUG_LOG(info->line,"flip: %i\n", length)); + + if (count == buffer->length) { + info->first_recv_buffer = buffer->next; + kfree(buffer); + } else { + buffer->length -= count; + memmove(buffer->buffer, buffer->buffer + count, buffer->length); + buffer->error = TTY_NORMAL; + } + } + + if (!info->first_recv_buffer) + info->last_recv_buffer = NULL; + + tty->flip.count = length; + DFLIP(if (tty->ldisc.chars_in_buffer(tty) > 3500) { + DEBUG_LOG(info->line, "ldisc %lu\n", + tty->ldisc.chars_in_buffer(tty)); + DEBUG_LOG(info->line, "flip.count %lu\n", + tty->flip.count); + } + ); + restore_flags(flags); + + DFLIP( + if (1) { + + if (test_bit(TTY_DONT_FLIP, &tty->flags)) { + DEBUG_LOG(info->line, "*** TTY_DONT_FLIP set flip.count %i ***\n", tty->flip.count); + DEBUG_LOG(info->line, "*** recv_cnt %i\n", info->recv_cnt); + } else { + } + DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx); + DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty)); + DEBUG_LOG(info->line, "room %lu\n", tty->ldisc.receive_room(tty)); + } + + ); + + /* this includes a check for low-latency */ + tty_flip_buffer_push(tty); +} + +static _INLINE_ void +check_flush_timeout(struct e100_serial *info) +{ + /* Flip what we've got (if we can) */ + flush_to_flip_buffer(info); + + /* We might need to flip later, but not to fast + * since the system is busy processing input... */ + if (info->first_recv_buffer) + START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000); + + /* Force eop last, since data might have come while we're processing + * and if we started the slow timer above, we won't start a fast + * below. + */ + force_eop_if_needed(info); +} + +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER +static void flush_timeout_function(unsigned long data) +{ + struct e100_serial *info = (struct e100_serial *)data; + + fast_timers[info->line].function = NULL; + serial_fast_timer_expired++; + TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line)); + TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired)); + check_flush_timeout(info); +} + +#else + +/* dma fifo/buffer timeout handler + forces an end-of-packet for the dma input channel if no chars + have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s. +*/ + +static struct timer_list flush_timer; + +static void +timed_flush_handler(unsigned long ptr) +{ + struct e100_serial *info; + int i; + +#ifdef CONFIG_SVINTO_SIM + return; +#endif + + for (i = 0; i < NR_PORTS; i++) { + info = rs_table + i; + if (info->uses_dma_in) + check_flush_timeout(info); + } + + /* restart flush timer */ + mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); +} +#endif + +#ifdef SERIAL_HANDLE_EARLY_ERRORS + +/* If there is an error (ie break) when the DMA is running and + * there are no bytes in the fifo the DMA is stopped and we get no + * eop interrupt. Thus we have to monitor the first bytes on a DMA + * transfer, and if it is without error we can turn the serial + * interrupts off. + */ + +/* +BREAK handling on ETRAX 100: +ETRAX will generate interrupt although there is no stop bit between the +characters. + +Depending on how long the break sequence is, the end of the breaksequence +will look differently: +| indicates start/end of a character. + +B= Break character (0x00) with framing error. +E= Error byte with parity error received after B characters. +F= "Faked" valid byte received immediately after B characters. +V= Valid byte + +1. + B BL ___________________________ V +.._|__________|__________| |valid data | + +Multiple frame errors with data == 0x00 (B), +the timing matches up "perfectly" so no extra ending char is detected. +The RXD pin is 1 in the last interrupt, in that case +we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really +know if another byte will come and this really is case 2. below +(e.g F=0xFF or 0xFE) +If RXD pin is 0 we can expect another character (see 2. below). + + +2. + + B B E or F__________________..__ V +.._|__________|__________|______ | |valid data + "valid" or + parity error + +Multiple frame errors with data == 0x00 (B), +but the part of the break trigs is interpreted as a start bit (and possibly +some 0 bits followed by a number of 1 bits and a stop bit). +Depending on parity settings etc. this last character can be either +a fake "valid" char (F) or have a parity error (E). + +If the character is valid it will be put in the buffer, +we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt +will set the flags so the tty will handle it, +if it's an error byte it will not be put in the buffer +and we set info->errorcode = ERRCODE_INSERT_BREAK. + +To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp +of the last faulty char (B) and compares it with the current time: +If the time elapsed time is less then 2*char_time_usec we will assume +it's a faked F char and not a Valid char and set +info->errorcode = ERRCODE_SET_BREAK. + +Flaws in the above solution: +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +We use the timer to distinguish a F character from a V character, +if a V character is to close after the break we might make the wrong decision. + +TODO: The break will be delayed until an F or V character is received. + +*/ + +extern _INLINE_ +struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info) +{ + unsigned long data_read; + struct tty_struct *tty = info->tty; + + if (!tty) { + printk("!NO TTY!\n"); + return info; + } + if (tty->flip.count >= TTY_FLIPBUF_SIZE - TTY_THRESHOLD_THROTTLE) { + /* check TTY_THROTTLED first so it indicates our state */ + if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) { + DFLOW(DEBUG_LOG(info->line, "rs_throttle flip.count: %i\n", tty->flip.count)); + rs_throttle(tty); + } + } + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + DEBUG_LOG(info->line, "force FLIP! %i\n", tty->flip.count); + tty->flip.work.func((void *) tty); + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + DEBUG_LOG(info->line, "FLIP FULL! %i\n", tty->flip.count); + return info; /* if TTY_DONT_FLIP is set */ + } + } + /* Read data and status at the same time */ + data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); +more_data: + if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) { + DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); + } + DINTR2(DEBUG_LOG(info->line, "ser_rx %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read))); + + if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) | + IO_MASK(R_SERIAL0_READ, par_err) | + IO_MASK(R_SERIAL0_READ, overrun) )) { + /* An error */ + info->last_rx_active_usec = GET_JIFFIES_USEC(); + info->last_rx_active = jiffies; + DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read)); + DLOG_INT_TRIG( + if (!log_int_trig1_pos) { + log_int_trig1_pos = log_int_pos; + log_int(rdpc(), 0, 0); + } + ); + + + if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) && + (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) { + /* Most likely a break, but we get interrupts over and + * over again. + */ + + if (!info->break_detected_cnt) { + DEBUG_LOG(info->line, "#BRK start\n", 0); + } + if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) { + /* The RX pin is high now, so the break + * must be over, but.... + * we can't really know if we will get another + * last byte ending the break or not. + * And we don't know if the byte (if any) will + * have an error or look valid. + */ + DEBUG_LOG(info->line, "# BL BRK\n", 0); + info->errorcode = ERRCODE_INSERT_BREAK; + } + info->break_detected_cnt++; + } else { + /* The error does not look like a break, but could be + * the end of one + */ + if (info->break_detected_cnt) { + DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); + info->errorcode = ERRCODE_INSERT_BREAK; + } else { + if (info->errorcode == ERRCODE_INSERT_BREAK) { + info->icount.brk++; + *tty->flip.char_buf_ptr = 0; + *tty->flip.flag_buf_ptr = TTY_BREAK; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + info->icount.rx++; + } + *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read); + + if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) { + info->icount.parity++; + *tty->flip.flag_buf_ptr = TTY_PARITY; + } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) { + info->icount.overrun++; + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) { + info->icount.frame++; + *tty->flip.flag_buf_ptr = TTY_FRAME; + } + info->errorcode = 0; + } + info->break_detected_cnt = 0; + } + } else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { + /* No error */ + DLOG_INT_TRIG( + if (!log_int_trig1_pos) { + if (log_int_pos >= log_int_size) { + log_int_pos = 0; + } + log_int_trig0_pos = log_int_pos; + log_int(rdpc(), 0, 0); + } + ); + *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read); + *tty->flip.flag_buf_ptr = 0; + } else { + DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read); + } + + + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + info->icount.rx++; + data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); + if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { + DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)); + goto more_data; + } + + tty_flip_buffer_push(info->tty); + return info; +} + +extern _INLINE_ +struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info) +{ + unsigned char rstat; + +#ifdef SERIAL_DEBUG_INTR + printk("Interrupt from serport %d\n", i); +#endif +/* DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */ + if (!info->uses_dma_in) { + return handle_ser_rx_interrupt_no_dma(info); + } + /* DMA is used */ + rstat = info->port[REG_STATUS]; + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) { + DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0)); + } + + if (rstat & SER_ERROR_MASK) { + unsigned char data; + + info->last_rx_active_usec = GET_JIFFIES_USEC(); + info->last_rx_active = jiffies; + /* If we got an error, we must reset it by reading the + * data_in field + */ + data = info->port[REG_DATA]; + DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data)); + DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat)); + if (!data && (rstat & SER_FRAMING_ERR_MASK)) { + /* Most likely a break, but we get interrupts over and + * over again. + */ + + if (!info->break_detected_cnt) { + DEBUG_LOG(info->line, "#BRK start\n", 0); + } + if (rstat & SER_RXD_MASK) { + /* The RX pin is high now, so the break + * must be over, but.... + * we can't really know if we will get another + * last byte ending the break or not. + * And we don't know if the byte (if any) will + * have an error or look valid. + */ + DEBUG_LOG(info->line, "# BL BRK\n", 0); + info->errorcode = ERRCODE_INSERT_BREAK; + } + info->break_detected_cnt++; + } else { + /* The error does not look like a break, but could be + * the end of one + */ + if (info->break_detected_cnt) { + DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); + info->errorcode = ERRCODE_INSERT_BREAK; + } else { + if (info->errorcode == ERRCODE_INSERT_BREAK) { + info->icount.brk++; + add_char_and_flag(info, '\0', TTY_BREAK); + } + + if (rstat & SER_PAR_ERR_MASK) { + info->icount.parity++; + add_char_and_flag(info, data, TTY_PARITY); + } else if (rstat & SER_OVERRUN_MASK) { + info->icount.overrun++; + add_char_and_flag(info, data, TTY_OVERRUN); + } else if (rstat & SER_FRAMING_ERR_MASK) { + info->icount.frame++; + add_char_and_flag(info, data, TTY_FRAME); + } + + info->errorcode = 0; + } + info->break_detected_cnt = 0; + DEBUG_LOG(info->line, "#iERR s d %04X\n", + ((rstat & SER_ERROR_MASK) << 8) | data); + } + PROCSTAT(ser_stat[info->line].early_errors_cnt++); + } else { /* It was a valid byte, now let the DMA do the rest */ + unsigned long curr_time_u = GET_JIFFIES_USEC(); + unsigned long curr_time = jiffies; + + if (info->break_detected_cnt) { + /* Detect if this character is a new valid char or the + * last char in a break sequence: If LSBits are 0 and + * MSBits are high AND the time is close to the + * previous interrupt we should discard it. + */ + long elapsed_usec = + (curr_time - info->last_rx_active) * (1000000/HZ) + + curr_time_u - info->last_rx_active_usec; + if (elapsed_usec < 2*info->char_time_usec) { + DEBUG_LOG(info->line, "FBRK %i\n", info->line); + /* Report as BREAK (error) and let + * receive_chars_dma() handle it + */ + info->errorcode = ERRCODE_SET_BREAK; + } else { + DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line); + } + DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt); + } + +#ifdef SERIAL_DEBUG_INTR + printk("** OK, disabling ser_interrupts\n"); +#endif + e100_disable_serial_data_irq(info); + DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line)); + info->break_detected_cnt = 0; + + PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++); + } + /* Restarting the DMA never hurts */ + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); + START_FLUSH_FAST_TIMER(info, "ser_int"); + return info; +} /* handle_ser_rx_interrupt */ + +extern _INLINE_ void handle_ser_tx_interrupt(struct e100_serial *info) +{ + unsigned long flags; + + if (info->x_char) { + unsigned char rstat; + DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); + save_flags(flags); cli(); + rstat = info->port[REG_STATUS]; + DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); + + info->port[REG_TR_DATA] = info->x_char; + info->icount.tx++; + info->x_char = 0; + /* We must enable since it is disabled in ser_interrupt */ + e100_enable_serial_tx_ready_irq(info); + restore_flags(flags); + return; + } + if (info->uses_dma_out) { + unsigned char rstat; + int i; + /* We only use normal tx interrupt when sending x_char */ + DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); + save_flags(flags); cli(); + rstat = info->port[REG_STATUS]; + DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); + e100_disable_serial_tx_ready_irq(info); + if (info->tty->stopped) + rs_stop(info->tty); + /* Enable the DMA channel and tell it to continue */ + e100_enable_txdma_channel(info); + /* Wait 12 cycles before doing the DMA command */ + for(i = 6; i > 0; i--) + nop(); + + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue); + restore_flags(flags); + return; + } + /* Normal char-by-char interrupt */ + if (info->xmit.head == info->xmit.tail + || info->tty->stopped + || info->tty->hw_stopped) { + DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n", info->tty->stopped)); + e100_disable_serial_tx_ready_irq(info); + info->tr_running = 0; + return; + } + DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); + /* Send a byte, rs485 timing is critical so turn of ints */ + save_flags(flags); cli(); + info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; + info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); + info->icount.tx++; + if (info->xmit.head == info->xmit.tail) { +#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER) + if (info->rs485.enabled) { + /* Set a short timer to toggle RTS */ + start_one_shot_timer(&fast_timers_rs485[info->line], + rs485_toggle_rts_timer_function, + (unsigned long)info, + info->char_time_usec*2, + "RS-485"); + } +#endif /* RS485 */ + info->last_tx_active_usec = GET_JIFFIES_USEC(); + info->last_tx_active = jiffies; + e100_disable_serial_tx_ready_irq(info); + info->tr_running = 0; + DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0)); + } else { + /* We must enable since it is disabled in ser_interrupt */ + e100_enable_serial_tx_ready_irq(info); + } + restore_flags(flags); + + if (CIRC_CNT(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE) < WAKEUP_CHARS) + rs_sched_event(info, RS_EVENT_WRITE_WAKEUP); + +} /* handle_ser_tx_interrupt */ + +/* result of time measurements: + * RX duration 54-60 us when doing something, otherwise 6-9 us + * ser_int duration: just sending: 8-15 us normally, up to 73 us + */ +static irqreturn_t +ser_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + static volatile int tx_started = 0; + struct e100_serial *info; + int i; + unsigned long flags; + unsigned long irq_mask1_rd; + unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */ + int handled = 0; + static volatile unsigned long reentered_ready_mask = 0; + + save_flags(flags); cli(); + irq_mask1_rd = *R_IRQ_MASK1_RD; + /* First handle all rx interrupts with ints disabled */ + info = rs_table; + irq_mask1_rd &= e100_ser_int_mask; + for (i = 0; i < NR_PORTS; i++) { + /* Which line caused the data irq? */ + if (irq_mask1_rd & data_mask) { + handled = 1; + handle_ser_rx_interrupt(info); + } + info += 1; + data_mask <<= 2; + } + /* Handle tx interrupts with interrupts enabled so we + * can take care of new data interrupts while transmitting + * We protect the tx part with the tx_started flag. + * We disable the tr_ready interrupts we are about to handle and + * unblock the serial interrupt so new serial interrupts may come. + * + * If we get a new interrupt: + * - it migth be due to synchronous serial ports. + * - serial irq will be blocked by general irq handler. + * - async data will be handled above (sync will be ignored). + * - tx_started flag will prevent us from trying to send again and + * we will exit fast - no need to unblock serial irq. + * - Next (sync) serial interrupt handler will be runned with + * disabled interrupt due to restore_flags() at end of function, + * so sync handler will not be preempted or reentered. + */ + if (!tx_started) { + unsigned long ready_mask; + unsigned long + tx_started = 1; + /* Only the tr_ready interrupts left */ + irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); + while (irq_mask1_rd) { + /* Disable those we are about to handle */ + *R_IRQ_MASK1_CLR = irq_mask1_rd; + /* Unblock the serial interrupt */ + *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); + + sti(); + ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */ + info = rs_table; + for (i = 0; i < NR_PORTS; i++) { + /* Which line caused the ready irq? */ + if (irq_mask1_rd & ready_mask) { + handled = 1; + handle_ser_tx_interrupt(info); + } + info += 1; + ready_mask <<= 2; + } + /* handle_ser_tx_interrupt enables tr_ready interrupts */ + cli(); + /* Handle reentered TX interrupt */ + irq_mask1_rd = reentered_ready_mask; + } + cli(); + tx_started = 0; + } else { + unsigned long ready_mask; + ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser1_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser2_ready) | + IO_MASK(R_IRQ_MASK1_RD, ser3_ready)); + if (ready_mask) { + reentered_ready_mask |= ready_mask; + /* Disable those we are about to handle */ + *R_IRQ_MASK1_CLR = ready_mask; + DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask)); + } + } + + restore_flags(flags); + return IRQ_RETVAL(handled); +} /* ser_interrupt */ +#endif + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +/* + * This routine is used to handle the "bottom half" processing for the + * serial driver, known also the "software interrupt" processing. + * This processing is done at the kernel interrupt level, after the + * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This + * is where time-consuming activities which can not be done in the + * interrupt driver proper are done; the interrupt driver schedules + * them using rs_sched_event(), and they get done here. + */ +static void +do_softint(void *private_) +{ + struct e100_serial *info = (struct e100_serial *) private_; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) { + if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && + tty->ldisc.write_wakeup) + (tty->ldisc.write_wakeup)(tty); + wake_up_interruptible(&tty->write_wait); + } +} + +static int +startup(struct e100_serial * info) +{ + unsigned long flags; + unsigned long xmit_page; + int i; + + xmit_page = get_zeroed_page(GFP_KERNEL); + if (!xmit_page) + return -ENOMEM; + + save_flags(flags); + cli(); + + /* if it was already initialized, skip this */ + + if (info->flags & ASYNC_INITIALIZED) { + restore_flags(flags); + free_page(xmit_page); + return 0; + } + + if (info->xmit.buf) + free_page(xmit_page); + else + info->xmit.buf = (unsigned char *) xmit_page; + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf); +#endif + +#ifdef CONFIG_SVINTO_SIM + /* Bits and pieces collected from below. Better to have them + in one ifdef:ed clause than to mix in a lot of ifdefs, + right? */ + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + + info->xmit.head = info->xmit.tail = 0; + info->first_recv_buffer = info->last_recv_buffer = NULL; + info->recv_cnt = info->max_recv_cnt = 0; + + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) + info->rec_descr[i].buf = NULL; + + /* No real action in the simulator, but may set info important + to ioctl. */ + change_speed(info); +#else + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in change_speed()) + */ + + /* + * Reset the DMA channels and make sure their interrupts are cleared + */ + + if (info->dma_in_enabled) { + info->uses_dma_in = 1; + e100_enable_rxdma_channel(info); + + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + + /* Wait until reset cycle is complete */ + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + + /* Make sure the irqs are cleared */ + *info->iclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + } else { + e100_disable_rxdma_channel(info); + } + + if (info->dma_out_enabled) { + info->uses_dma_out = 1; + e100_enable_txdma_channel(info); + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) == + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset)); + + /* Make sure the irqs are cleared */ + *info->oclrintradr = + IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) | + IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do); + } else { + e100_disable_txdma_channel(info); + } + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + + info->xmit.head = info->xmit.tail = 0; + info->first_recv_buffer = info->last_recv_buffer = NULL; + info->recv_cnt = info->max_recv_cnt = 0; + + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) + info->rec_descr[i].buf = 0; + + /* + * and set the speed and other flags of the serial port + * this will start the rx/tx as well + */ +#ifdef SERIAL_HANDLE_EARLY_ERRORS + e100_enable_serial_data_irq(info); +#endif + change_speed(info); + + /* dummy read to reset any serial errors */ + + (void)info->port[REG_DATA]; + + /* enable the interrupts */ + if (info->uses_dma_out) + e100_enable_txdma_irq(info); + + e100_enable_rx_irq(info); + + info->tr_running = 0; /* to be sure we don't lock up the transmitter */ + + /* setup the dma input descriptor and start dma */ + + start_receive(info); + + /* for safety, make sure the descriptors last result is 0 bytes written */ + + info->tr_descr.sw_len = 0; + info->tr_descr.hw_len = 0; + info->tr_descr.status = 0; + + /* enable RTS/DTR last */ + + e100_rts(info, 1); + e100_dtr(info, 1); + +#endif /* CONFIG_SVINTO_SIM */ + + info->flags |= ASYNC_INITIALIZED; + + restore_flags(flags); + return 0; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void +shutdown(struct e100_serial * info) +{ + unsigned long flags; + struct etrax_dma_descr *descr = info->rec_descr; + struct etrax_recv_buffer *buffer; + int i; + +#ifndef CONFIG_SVINTO_SIM + /* shut down the transmitter and receiver */ + DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line)); + e100_disable_rx(info); + info->port[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40); + + /* disable interrupts, reset dma channels */ + if (info->uses_dma_in) { + e100_disable_rxdma_irq(info); + *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + info->uses_dma_in = 0; + } else { + e100_disable_serial_data_irq(info); + } + + if (info->uses_dma_out) { + e100_disable_txdma_irq(info); + info->tr_running = 0; + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset); + info->uses_dma_out = 0; + } else { + e100_disable_serial_tx_ready_irq(info); + info->tr_running = 0; + } + +#endif /* CONFIG_SVINTO_SIM */ + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d (irq %d)....\n", info->line, + info->irq); +#endif + + save_flags(flags); + cli(); /* Disable interrupts */ + + if (info->xmit.buf) { + free_page((unsigned long)info->xmit.buf); + info->xmit.buf = NULL; + } + + for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) + if (descr[i].buf) { + buffer = phys_to_virt(descr[i].buf) - sizeof *buffer; + kfree(buffer); + descr[i].buf = 0; + } + + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) { + /* hang up DTR and RTS if HUPCL is enabled */ + e100_dtr(info, 0); + e100_rts(info, 0); /* could check CRTSCTS before doing this */ + } + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + restore_flags(flags); +} + + +/* change baud rate and other assorted parameters */ + +static void +change_speed(struct e100_serial *info) +{ + unsigned int cflag; + unsigned long xoff; + unsigned long flags; + /* first some safety checks */ + + if (!info->tty || !info->tty->termios) + return; + if (!info->port) + return; + + cflag = info->tty->termios->c_cflag; + + /* possibly, the tx/rx should be disabled first to do this safely */ + + /* change baud-rate and write it to the hardware */ + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) { + /* Special baudrate */ + u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ + unsigned long alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); + /* R_ALT_SER_BAUDRATE selects the source */ + DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n", + (unsigned long)info->baud_base, info->custom_divisor)); + if (info->baud_base == SERIAL_PRESCALE_BASE) { + /* 0, 2-65535 (0=65536) */ + u16 divisor = info->custom_divisor; + /* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */ + /* baudrate is 3.125MHz/custom_divisor */ + alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale); + alt_source = 0x11; + DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor)); + *R_SERIAL_PRESCALE = divisor; + info->baud = SERIAL_PRESCALE_BASE/divisor; + } +#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED + else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 && + info->custom_divisor == 1) || + (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ && + info->custom_divisor == 8)) { + /* ext_clk selected */ + alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern); + DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8)); + info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8; + } + } +#endif + else + { + /* Bad baudbase, we don't support using timer0 + * for baudrate. + */ + printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n", + (unsigned long)info->baud_base, info->custom_divisor); + } + r_alt_ser_baudrate_shadow &= ~mask; + r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); + *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; + } else { + /* Normal baudrate */ + /* Make sure we use normal baudrate */ + u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */ + unsigned long alt_source = + IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) | + IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal); + r_alt_ser_baudrate_shadow &= ~mask; + r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8)); +#ifndef CONFIG_SVINTO_SIM + *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow; +#endif /* CONFIG_SVINTO_SIM */ + + info->baud = cflag_to_baud(cflag); +#ifndef CONFIG_SVINTO_SIM + info->port[REG_BAUD] = cflag_to_etrax_baud(cflag); +#endif /* CONFIG_SVINTO_SIM */ + } + +#ifndef CONFIG_SVINTO_SIM + /* start with default settings and then fill in changes */ + save_flags(flags); + cli(); + /* 8 bit, no/even parity */ + info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) | + IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) | + IO_MASK(R_SERIAL0_REC_CTRL, rec_par)); + + /* 8 bit, no/even parity, 1 stop bit, no cts */ + info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) | + IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) | + IO_MASK(R_SERIAL0_TR_CTRL, tr_par) | + IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) | + IO_MASK(R_SERIAL0_TR_CTRL, auto_cts)); + + if ((cflag & CSIZE) == CS7) { + /* set 7 bit mode */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit); + } + + if (cflag & CSTOPB) { + /* set 2 stop bit mode */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits); + } + + if (cflag & PARENB) { + /* enable parity */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable); + } + + if (cflag & CMSPAR) { + /* enable stick parity, PARODD mean Mark which matches ETRAX */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick); + } + if (cflag & PARODD) { + /* set odd parity (or Mark if CMSPAR) */ + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd); + } + + if (cflag & CRTSCTS) { + /* enable automatic CTS handling */ + DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0)); + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active); + } + + /* make sure the tx and rx are enabled */ + + info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable); + info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable); + + /* actually write the control regs to the hardware */ + + info->port[REG_TR_CTRL] = info->tx_ctrl; + info->port[REG_REC_CTRL] = info->rx_ctrl; + xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->tty)); + xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable); + if (info->tty->termios->c_iflag & IXON ) { + DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", STOP_CHAR(info->tty))); + xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable); + } + + *((unsigned long *)&info->port[REG_XOFF]) = xoff; + restore_flags(flags); +#endif /* !CONFIG_SVINTO_SIM */ + + update_char_time(info); + +} /* change_speed */ + +/* start transmitting chars NOW */ + +static void +rs_flush_chars(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + if (info->tr_running || + info->xmit.head == info->xmit.tail || + tty->stopped || + tty->hw_stopped || + !info->xmit.buf) + return; + +#ifdef SERIAL_DEBUG_FLOW + printk("rs_flush_chars\n"); +#endif + + /* this protection might not exactly be necessary here */ + + save_flags(flags); + cli(); + start_transmit(info); + restore_flags(flags); +} + +extern _INLINE_ int +rs_raw_write(struct tty_struct * tty, int from_user, + const unsigned char *buf, int count) +{ + int c, ret = 0; + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + /* first some sanity checks */ + + if (!tty || !info->xmit.buf || !tmp_buf) + return 0; + +#ifdef SERIAL_DEBUG_DATA + if (info->line == SERIAL_DEBUG_LINE) + printk("rs_raw_write (%d), status %d\n", + count, info->port[REG_STATUS]); +#endif + +#ifdef CONFIG_SVINTO_SIM + /* Really simple. The output is here and now. */ + SIMCOUT(buf, count); + return count; +#endif + save_flags(flags); + DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); + DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); + + + /* the cli/restore_flags pairs below are needed because the + * DMA interrupt handler moves the info->xmit values. the memcpy + * needs to be in the critical region unfortunately, because we + * need to read xmit values, memcpy, write xmit values in one + * atomic operation... this could perhaps be avoided by more clever + * design. + */ + if (from_user) { + down(&tmp_buf_sem); + while (1) { + int c1; + c = CIRC_SPACE_TO_END(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) + break; + + c -= copy_from_user(tmp_buf, buf, c); + if (!c) { + if (!ret) + ret = -EFAULT; + break; + } + cli(); + c1 = CIRC_SPACE_TO_END(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE); + if (c1 < c) + c = c1; + memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c); + info->xmit.head = ((info->xmit.head + c) & + (SERIAL_XMIT_SIZE-1)); + restore_flags(flags); + buf += c; + count -= c; + ret += c; + } + up(&tmp_buf_sem); + } else { + cli(); + while (count) { + c = CIRC_SPACE_TO_END(info->xmit.head, + info->xmit.tail, + SERIAL_XMIT_SIZE); + + if (count < c) + c = count; + if (c <= 0) + break; + + memcpy(info->xmit.buf + info->xmit.head, buf, c); + info->xmit.head = (info->xmit.head + c) & + (SERIAL_XMIT_SIZE-1); + buf += c; + count -= c; + ret += c; + } + restore_flags(flags); + } + + /* enable transmitter if not running, unless the tty is stopped + * this does not need IRQ protection since if tr_running == 0 + * the IRQ's are not running anyway for this port. + */ + DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret)); + + if (info->xmit.head != info->xmit.tail && + !tty->stopped && + !tty->hw_stopped && + !info->tr_running) { + start_transmit(info); + } + + return ret; +} /* raw_raw_write() */ + +static int +rs_write(struct tty_struct * tty, int from_user, + const unsigned char *buf, int count) +{ +#if defined(CONFIG_ETRAX_RS485) + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + if (info->rs485.enabled) + { + /* If we are in RS-485 mode, we need to toggle RTS and disable + * the receiver before initiating a DMA transfer + */ +#ifdef CONFIG_ETRAX_FAST_TIMER + /* Abort any started timer */ + fast_timers_rs485[info->line].function = NULL; + del_fast_timer(&fast_timers_rs485[info->line]); +#endif + e100_rts(info, info->rs485.rts_on_send); +#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) + e100_disable_rx(info); + e100_enable_rx_irq(info); +#endif + + if (info->rs485.delay_rts_before_send > 0) + msleep(info->rs485.delay_rts_before_send); + } +#endif /* CONFIG_ETRAX_RS485 */ + + count = rs_raw_write(tty, from_user, buf, count); + +#if defined(CONFIG_ETRAX_RS485) + if (info->rs485.enabled) + { + unsigned int val; + /* If we are in RS-485 mode the following has to be done: + * wait until DMA is ready + * wait on transmit shift register + * toggle RTS + * enable the receiver + */ + + /* Sleep until all sent */ + tty_wait_until_sent(tty, 0); +#ifdef CONFIG_ETRAX_FAST_TIMER + /* Now sleep a little more so that shift register is empty */ + schedule_usleep(info->char_time_usec * 2); +#endif + /* wait on transmit shift register */ + do{ + get_lsr_info(info, &val); + }while (!(val & TIOCSER_TEMT)); + + e100_rts(info, info->rs485.rts_after_sent); + +#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER) + e100_enable_rx(info); + e100_enable_rxdma_irq(info); +#endif + } +#endif /* CONFIG_ETRAX_RS485 */ + + return count; +} /* rs_write */ + + +/* how much space is available in the xmit buffer? */ + +static int +rs_write_room(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +/* How many chars are in the xmit buffer? + * This does not include any chars in the transmitter FIFO. + * Use wait_until_sent for waiting for FIFO drain. + */ + +static int +rs_chars_in_buffer(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +/* discard everything in the xmit buffer */ + +static void +rs_flush_buffer(struct tty_struct *tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + save_flags(flags); + cli(); + info->xmit.head = info->xmit.tail = 0; + restore_flags(flags); + + wake_up_interruptible(&tty->write_wait); + + if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && + tty->ldisc.write_wakeup) + (tty->ldisc.write_wakeup)(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + * + * Since we use DMA we don't check for info->x_char in transmit_chars_dma(), + * but we do it in handle_ser_tx_interrupt(). + * We disable DMA channel and enable tx ready interrupt and write the + * character when possible. + */ +static void rs_send_xchar(struct tty_struct *tty, char ch) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + save_flags(flags); cli(); + if (info->uses_dma_out) { + /* Put the DMA on hold and disable the channel */ + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold); + while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) != + IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold)); + e100_disable_txdma_channel(info); + } + + /* Must make sure transmitter is not stopped before we can transmit */ + if (tty->stopped) + rs_start(tty); + + /* Enable manual transmit interrupt and send from there */ + DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch)); + info->x_char = ch; + e100_enable_serial_tx_ready_irq(info); + restore_flags(flags); +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void +rs_throttle(struct tty_struct * tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %lu....\n", tty_name(tty, buf), + (unsigned long)tty->ldisc.chars_in_buffer(tty)); +#endif + DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty))); + + /* Do RTS before XOFF since XOFF might take some time */ + if (tty->termios->c_cflag & CRTSCTS) { + /* Turn off RTS line */ + e100_rts(info, 0); + } + if (I_IXOFF(tty)) + rs_send_xchar(tty, STOP_CHAR(tty)); + +} + +static void +rs_unthrottle(struct tty_struct * tty) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("unthrottle %s: %lu....\n", tty_name(tty, buf), + (unsigned long)tty->ldisc.chars_in_buffer(tty)); +#endif + DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty))); + DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count)); + /* Do RTS before XOFF since XOFF might take some time */ + if (tty->termios->c_cflag & CRTSCTS) { + /* Assert RTS line */ + e100_rts(info, 1); + } + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + rs_send_xchar(tty, START_CHAR(tty)); + } + +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int +get_serial_info(struct e100_serial * info, + struct serial_struct * retinfo) +{ + struct serial_struct tmp; + + /* this is all probably wrong, there are a lot of fields + * here that we don't have in e100_serial and maybe we + * should set them to something else than 0. + */ + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = (int)info->port; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int +set_serial_info(struct e100_serial *info, + struct serial_struct *new_info) +{ + struct serial_struct new_serial; + struct e100_serial old_info; + int retval = 0; + + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.type != info->type) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != + (info->flags & ~ASYNC_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + goto check_and_exit; + } + + if (info->count > 1) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud_base = new_serial.baud_base; + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->custom_divisor = new_serial.custom_divisor; + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + check_and_exit: + if (info->flags & ASYNC_INITIALIZED) { + change_speed(info); + } else + retval = startup(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int +get_lsr_info(struct e100_serial * info, unsigned int *value) +{ + unsigned int result = TIOCSER_TEMT; +#ifndef CONFIG_SVINTO_SIM + unsigned long curr_time = jiffies; + unsigned long curr_time_usec = GET_JIFFIES_USEC(); + unsigned long elapsed_usec = + (curr_time - info->last_tx_active) * 1000000/HZ + + curr_time_usec - info->last_tx_active_usec; + + if (info->xmit.head != info->xmit.tail || + elapsed_usec < 2*info->char_time_usec) { + result = 0; + } +#endif + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +#ifdef SERIAL_DEBUG_IO +struct state_str +{ + int state; + const char *str; +}; + +const struct state_str control_state_str[] = { + {TIOCM_DTR, "DTR" }, + {TIOCM_RTS, "RTS"}, + {TIOCM_ST, "ST?" }, + {TIOCM_SR, "SR?" }, + {TIOCM_CTS, "CTS" }, + {TIOCM_CD, "CD" }, + {TIOCM_RI, "RI" }, + {TIOCM_DSR, "DSR" }, + {0, NULL } +}; + +char *get_control_state_str(int MLines, char *s) +{ + int i = 0; + + s[0]='\0'; + while (control_state_str[i].str != NULL) { + if (MLines & control_state_str[i].state) { + if (s[0] != '\0') { + strcat(s, ", "); + } + strcat(s, control_state_str[i].str); + } + i++; + } + return s; +} +#endif + +static int +get_modem_info(struct e100_serial * info, unsigned int *value) +{ + unsigned int result; + /* Polarity isn't verified */ +#if 0 /*def SERIAL_DEBUG_IO */ + + printk("get_modem_info: RTS: %i DTR: %i CD: %i RI: %i DSR: %i CTS: %i\n", + E100_RTS_GET(info), + E100_DTR_GET(info), + E100_CD_GET(info), + E100_RI_GET(info), + E100_DSR_GET(info), + E100_CTS_GET(info)); +#endif + + result = + (!E100_RTS_GET(info) ? TIOCM_RTS : 0) + | (!E100_DTR_GET(info) ? TIOCM_DTR : 0) + | (!E100_RI_GET(info) ? TIOCM_RNG : 0) + | (!E100_DSR_GET(info) ? TIOCM_DSR : 0) + | (!E100_CD_GET(info) ? TIOCM_CAR : 0) + | (!E100_CTS_GET(info) ? TIOCM_CTS : 0); + +#ifdef SERIAL_DEBUG_IO + printk("e100ser: modem state: %i 0x%08X\n", result, result); + { + char s[100]; + + get_control_state_str(result, s); + printk("state: %s\n", s); + } +#endif + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + + +static int +set_modem_info(struct e100_serial * info, unsigned int cmd, + unsigned int *value) +{ + unsigned int arg; + + if (copy_from_user(&arg, value, sizeof(int))) + return -EFAULT; + + switch (cmd) { + case TIOCMBIS: + if (arg & TIOCM_RTS) { + e100_rts(info, 1); + } + if (arg & TIOCM_DTR) { + e100_dtr(info, 1); + } + /* Handle FEMALE behaviour */ + if (arg & TIOCM_RI) { + e100_ri_out(info, 1); + } + if (arg & TIOCM_CD) { + e100_cd_out(info, 1); + } + break; + case TIOCMBIC: + if (arg & TIOCM_RTS) { + e100_rts(info, 0); + } + if (arg & TIOCM_DTR) { + e100_dtr(info, 0); + } + /* Handle FEMALE behaviour */ + if (arg & TIOCM_RI) { + e100_ri_out(info, 0); + } + if (arg & TIOCM_CD) { + e100_cd_out(info, 0); + } + break; + case TIOCMSET: + e100_rts(info, arg & TIOCM_RTS); + e100_dtr(info, arg & TIOCM_DTR); + /* Handle FEMALE behaviour */ + e100_ri_out(info, arg & TIOCM_RI); + e100_cd_out(info, arg & TIOCM_CD); + break; + default: + return -EINVAL; + } + return 0; +} + + +static void +rs_break(struct tty_struct *tty, int break_state) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + if (!info->port) + return; + + save_flags(flags); + cli(); + if (break_state == -1) { + /* Go to manual mode and set the txd pin to 0 */ + info->tx_ctrl &= 0x3F; /* Clear bit 7 (txd) and 6 (tr_enable) */ + } else { + info->tx_ctrl |= (0x80 | 0x40); /* Set bit 7 (txd) and 6 (tr_enable) */ + } + info->port[REG_TR_CTRL] = info->tx_ctrl; + restore_flags(flags); +} + +static int +rs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TIOCMGET: + return get_modem_info(info, (unsigned int *) arg); + case TIOCMBIS: + case TIOCMBIC: + case TIOCMSET: + return set_modem_info(info, cmd, (unsigned int *) arg); + case TIOCGSERIAL: + return get_serial_info(info, + (struct serial_struct *) arg); + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *) arg); + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); + + case TIOCSERGSTRUCT: + if (copy_to_user((struct e100_serial *) arg, + info, sizeof(struct e100_serial))) + return -EFAULT; + return 0; + +#if defined(CONFIG_ETRAX_RS485) + case TIOCSERSETRS485: + { + struct rs485_control rs485ctrl; + if (copy_from_user(&rs485ctrl, (struct rs485_control*)arg, sizeof(rs485ctrl))) + return -EFAULT; + + return e100_enable_rs485(tty, &rs485ctrl); + } + + case TIOCSERWRRS485: + { + struct rs485_write rs485wr; + if (copy_from_user(&rs485wr, (struct rs485_write*)arg, sizeof(rs485wr))) + return -EFAULT; + + return e100_write_rs485(tty, 1, rs485wr.outc, rs485wr.outc_size); + } +#endif + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void +rs_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + + if (tty->termios->c_cflag == old_termios->c_cflag && + tty->termios->c_iflag == old_termios->c_iflag) + return; + + change_speed(info); + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_start(tty); + } + +} + +/* In debugport.c - register a console write function that uses the normal + * serial driver + */ +typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len); + +extern debugport_write_function debug_write_function; + +static int rs_debug_write_function(int i, const char *buf, unsigned int len) +{ + int cnt; + int written = 0; + struct tty_struct *tty; + static int recurse_cnt = 0; + + tty = rs_table[i].tty; + if (tty) { + unsigned long flags; + if (recurse_cnt > 5) /* We skip this debug output */ + return 1; + + local_irq_save(flags); + recurse_cnt++; + local_irq_restore(flags); + do { + cnt = rs_write(tty, 0, buf + written, len); + if (cnt >= 0) { + written += cnt; + buf += cnt; + len -= cnt; + } else + len = cnt; + } while(len > 0); + local_irq_save(flags); + recurse_cnt--; + local_irq_restore(flags); + return 1; + } + return 0; +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * S structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void +rs_close(struct tty_struct *tty, struct file * filp) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + + if (!info) + return; + + /* interrupts are disabled for this entire function */ + + save_flags(flags); + cli(); + + if (tty_hung_up_p(filp)) { + restore_flags(flags); + return; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("[%d] rs_close ttyS%d, count = %d\n", current->pid, + info->line, info->count); +#endif + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk(KERN_CRIT + "rs_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk(KERN_CRIT "rs_close: bad serial port count for ttyS%d: %d\n", + info->line, info->count); + info->count = 0; + } + if (info->count) { + restore_flags(flags); + return; + } + info->flags |= ASYNC_CLOSING; + /* + * Save the termios structure, since this port may have + * separate termios for callout and dialin. + */ + if (info->flags & ASYNC_NORMAL_ACTIVE) + info->normal_termios = *tty->termios; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the serial receiver and the DMA receive interrupt. + */ +#ifdef SERIAL_HANDLE_EARLY_ERRORS + e100_disable_serial_data_irq(info); +#endif + +#ifndef CONFIG_SVINTO_SIM + e100_disable_rx(info); + e100_disable_rx_irq(info); + + if (info->flags & ASYNC_INITIALIZED) { + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important as we have a transmit FIFO! + */ + rs_wait_until_sent(tty, HZ); + } +#endif + + shutdown(info); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + if (tty->ldisc.flush_buffer) + tty->ldisc.flush_buffer(tty); + tty->closing = 0; + info->event = 0; + info->tty = 0; + if (info->blocked_open) { + if (info->close_delay) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(info->close_delay); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + restore_flags(flags); + + /* port closed */ + +#if defined(CONFIG_ETRAX_RS485) + if (info->rs485.enabled) { + info->rs485.enabled = 0; +#if defined(CONFIG_ETRAX_RS485_ON_PA) + *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit); +#endif +#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + rs485_port_g_bit, 0); +#endif +#if defined(CONFIG_ETRAX_RS485_LTC1387) + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0); + REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, + CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0); +#endif + } +#endif +} + +/* + * rs_wait_until_sent() --- wait until the transmitter is empty + */ +static void rs_wait_until_sent(struct tty_struct *tty, int timeout) +{ + unsigned long orig_jiffies; + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long curr_time = jiffies; + unsigned long curr_time_usec = GET_JIFFIES_USEC(); + long elapsed_usec = + (curr_time - info->last_tx_active) * (1000000/HZ) + + curr_time_usec - info->last_tx_active_usec; + + /* + * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO + * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k) + */ + orig_jiffies = jiffies; + while (info->xmit.head != info->xmit.tail || /* More in send queue */ + (*info->ostatusadr & 0x007f) || /* more in FIFO */ + (elapsed_usec < 2*info->char_time_usec)) { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + curr_time = jiffies; + curr_time_usec = GET_JIFFIES_USEC(); + elapsed_usec = + (curr_time - info->last_tx_active) * (1000000/HZ) + + curr_time_usec - info->last_tx_active_usec; + } + set_current_state(TASK_RUNNING); +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void +rs_hangup(struct tty_struct *tty) +{ + struct e100_serial * info = (struct e100_serial *)tty->driver_data; + + rs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = 0; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int +block_til_ready(struct tty_struct *tty, struct file * filp, + struct e100_serial *info) +{ + DECLARE_WAITQUEUE(wait, current); + unsigned long flags; + int retval; + int do_clocal = 0, extra_count = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) { + do_clocal = 1; + } + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: ttyS%d, count = %d\n", + info->line, info->count); +#endif + save_flags(flags); + cli(); + if (!tty_hung_up_p(filp)) { + extra_count++; + info->count--; + } + restore_flags(flags); + info->blocked_open++; + while (1) { + save_flags(flags); + cli(); + /* assert RTS and DTR */ + e100_rts(info, 1); + e100_dtr(info, 1); + restore_flags(flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & ASYNC_CLOSING) && do_clocal) + /* && (do_clocal || DCD_IS_ASSERTED) */ + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: ttyS%d, count = %d\n", + info->line, info->count); +#endif + schedule(); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + if (extra_count) + info->count++; + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: ttyS%d, count = %d\n", + info->line, info->count); +#endif + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +/* + * This routine is called whenever a serial port is opened. + * It performs the serial-specific initialization for the tty structure. + */ +static int +rs_open(struct tty_struct *tty, struct file * filp) +{ + struct e100_serial *info; + int retval, line; + unsigned long page; + + /* find which port we want to open */ + + line = tty->index; + + if (line < 0 || line >= NR_PORTS) + return -ENODEV; + + /* find the corresponding e100_serial struct in the table */ + info = rs_table + line; + + /* don't allow the opening of ports that are not enabled in the HW config */ + if (!info->enabled) + return -ENODEV; + +#ifdef SERIAL_DEBUG_OPEN + printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name, + info->count); +#endif + + info->count++; + tty->driver_data = info; + info->tty = tty; + + info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + if (!tmp_buf) { + page = get_zeroed_page(GFP_KERNEL); + if (!page) { + return -ENOMEM; + } + if (tmp_buf) + free_page(page); + else + tmp_buf = (unsigned char *) page; + } + + /* + * If the port is in the middle of closing, bail out now + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + return ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); +#else + return -EAGAIN; +#endif + } + + /* + * Start up the serial port + */ + + retval = startup(info); + if (retval) + return retval; + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open returning after block_til_ready with %d\n", + retval); +#endif + return retval; + } + + if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) { + *tty->termios = info->normal_termios; + change_speed(info); + } + +#ifdef SERIAL_DEBUG_OPEN + printk("rs_open ttyS%d successful...\n", info->line); +#endif + DLOG_INT_TRIG( log_int_pos = 0); + + DFLIP( if (info->line == SERIAL_DEBUG_LINE) { + info->icount.rx = 0; + } ); + + return 0; +} + +/* + * /proc fs routines.... + */ + +extern _INLINE_ int line_info(char *buf, struct e100_serial *info) +{ + char stat_buf[30]; + int ret; + unsigned long tmp; + + ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d", + info->line, (unsigned long)info->port, info->irq); + + if (!info->port || (info->type == PORT_UNKNOWN)) { + ret += sprintf(buf+ret, "\n"); + return ret; + } + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (!E100_RTS_GET(info)) + strcat(stat_buf, "|RTS"); + if (!E100_CTS_GET(info)) + strcat(stat_buf, "|CTS"); + if (!E100_DTR_GET(info)) + strcat(stat_buf, "|DTR"); + if (!E100_DSR_GET(info)) + strcat(stat_buf, "|DSR"); + if (!E100_CD_GET(info)) + strcat(stat_buf, "|CD"); + if (!E100_RI_GET(info)) + strcat(stat_buf, "|RI"); + + ret += sprintf(buf+ret, " baud:%d", info->baud); + + ret += sprintf(buf+ret, " tx:%lu rx:%lu", + (unsigned long)info->icount.tx, + (unsigned long)info->icount.rx); + tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); + if (tmp) { + ret += sprintf(buf+ret, " tx_pend:%lu/%lu", + (unsigned long)tmp, + (unsigned long)SERIAL_XMIT_SIZE); + } + + ret += sprintf(buf+ret, " rx_pend:%lu/%lu", + (unsigned long)info->recv_cnt, + (unsigned long)info->max_recv_cnt); + +#if 1 + if (info->tty) { + + if (info->tty->stopped) + ret += sprintf(buf+ret, " stopped:%i", + (int)info->tty->stopped); + if (info->tty->hw_stopped) + ret += sprintf(buf+ret, " hw_stopped:%i", + (int)info->tty->hw_stopped); + } + + { + unsigned char rstat = info->port[REG_STATUS]; + if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) + ret += sprintf(buf+ret, " xoff_detect:1"); + } + +#endif + + + + + if (info->icount.frame) + ret += sprintf(buf+ret, " fe:%lu", + (unsigned long)info->icount.frame); + + if (info->icount.parity) + ret += sprintf(buf+ret, " pe:%lu", + (unsigned long)info->icount.parity); + + if (info->icount.brk) + ret += sprintf(buf+ret, " brk:%lu", + (unsigned long)info->icount.brk); + + if (info->icount.overrun) + ret += sprintf(buf+ret, " oe:%lu", + (unsigned long)info->icount.overrun); + + /* + * Last thing is the RS-232 status lines + */ + ret += sprintf(buf+ret, " %s\n", stat_buf+1); + return ret; +} + +int rs_read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int i, len = 0, l; + off_t begin = 0; + + len += sprintf(page, "serinfo:1.0 driver:%s\n", + serial_version); + for (i = 0; i < NR_PORTS && len < 4000; i++) { + if (!rs_table[i].enabled) + continue; + l = line_info(page + len, &rs_table[i]); + len += l; + if (len+begin > off+count) + goto done; + if (len+begin < off) { + begin += len; + len = 0; + } + } +#ifdef DEBUG_LOG_INCLUDED + for (i = 0; i < debug_log_pos; i++) { + len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data)); + len += sprintf(page + len, debug_log[i].string, debug_log[i].value); + if (len+begin > off+count) + goto done; + if (len+begin < off) { + begin += len; + len = 0; + } + } + len += sprintf(page + len, "debug_log %i/%i %li bytes\n", + i, DEBUG_LOG_SIZE, begin+len); + debug_log_pos = 0; +#endif + + *eof = 1; +done: + if (off >= len+begin) + return 0; + *start = page + (off-begin); + return ((count < begin+len-off) ? count : begin+len-off); +} + +/* Finally, routines used to initialize the serial driver. */ + +static void +show_serial_version(void) +{ + printk(KERN_INFO + "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n", + &serial_version[11]); /* "$Revision: x.yy" */ +} + +/* rs_init inits the driver at boot (using the module_init chain) */ + +static struct tty_operations rs_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .break_ctl = rs_break, + .send_xchar = rs_send_xchar, + .wait_until_sent = rs_wait_until_sent, + .read_proc = rs_read_proc, +}; + +static int __init +rs_init(void) +{ + int i; + struct e100_serial *info; + struct tty_driver *driver = alloc_tty_driver(NR_PORTS); + + if (!driver) + return -ENOMEM; + + show_serial_version(); + + /* Setup the timed flush handler system */ + +#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER) + init_timer(&flush_timer); + flush_timer.function = timed_flush_handler; + mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); +#endif + + /* Initialize the tty_driver structure */ + + driver->driver_name = "serial"; + driver->name = "ttyS"; + driver->major = TTY_MAJOR; + driver->minor_start = 64; + driver->type = TTY_DRIVER_TYPE_SERIAL; + driver->subtype = SERIAL_TYPE_NORMAL; + driver->init_termios = tty_std_termios; + driver->init_termios.c_cflag = + B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ + driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; + driver->termios = serial_termios; + driver->termios_locked = serial_termios_locked; + + tty_set_operations(driver, &rs_ops); + serial_driver = driver; + if (tty_register_driver(driver)) + panic("Couldn't register serial driver\n"); + /* do some initializing for the separate ports */ + + for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { + info->uses_dma_in = 0; + info->uses_dma_out = 0; + info->line = i; + info->tty = 0; + info->type = PORT_ETRAX; + info->tr_running = 0; + info->forced_eop = 0; + info->baud_base = DEF_BAUD_BASE; + info->custom_divisor = 0; + info->flags = 0; + info->close_delay = 5*HZ/10; + info->closing_wait = 30*HZ; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + info->normal_termios = driver->init_termios; + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->xmit.buf = NULL; + info->xmit.tail = info->xmit.head = 0; + info->first_recv_buffer = info->last_recv_buffer = NULL; + info->recv_cnt = info->max_recv_cnt = 0; + info->last_tx_active_usec = 0; + info->last_tx_active = 0; + +#if defined(CONFIG_ETRAX_RS485) + /* Set sane defaults */ + info->rs485.rts_on_send = 0; + info->rs485.rts_after_sent = 1; + info->rs485.delay_rts_before_send = 0; + info->rs485.enabled = 0; +#endif + INIT_WORK(&info->work, do_softint, info); + + if (info->enabled) { + printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n", + serial_driver->name, info->line, (unsigned int)info->port); + } + } +#ifdef CONFIG_ETRAX_FAST_TIMER +#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER + memset(fast_timers, 0, sizeof(fast_timers)); +#endif +#ifdef CONFIG_ETRAX_RS485 + memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485)); +#endif + fast_timer_init(); +#endif + +#ifndef CONFIG_SVINTO_SIM + /* Not needed in simulator. May only complicate stuff. */ + /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ + + if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial ", NULL)) + panic("irq8"); + +#ifdef CONFIG_ETRAX_SERIAL_PORT0 +#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT + if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 0 dma tr", NULL)) + panic("irq22"); +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN + if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 0 dma rec", NULL)) + panic("irq23"); +#endif +#endif + +#ifdef CONFIG_ETRAX_SERIAL_PORT1 +#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT + if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 1 dma tr", NULL)) + panic("irq24"); +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN + if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 1 dma rec", NULL)) + panic("irq25"); +#endif +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT2 + /* DMA Shared with par0 (and SCSI0 and ATA) */ +#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT + if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma tr", NULL)) + panic("irq18"); +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN + if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma rec", NULL)) + panic("irq19"); +#endif +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT3 + /* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */ +#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT + if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma tr", NULL)) + panic("irq20"); +#endif +#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN + if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma rec", NULL)) + panic("irq21"); +#endif +#endif + +#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST + if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, SA_SHIRQ | SA_INTERRUPT, + "fast serial dma timeout", NULL)) { + printk(KERN_CRIT "err: timer1 irq\n"); + } +#endif +#endif /* CONFIG_SVINTO_SIM */ + debug_write_function = rs_debug_write_function; + return 0; +} + +/* this makes sure that rs_init is called during kernel boot */ + +module_init(rs_init); + +/* + * register_serial and unregister_serial allows for serial ports to be + * configured at run-time, to support PCMCIA modems. + */ +int +register_serial(struct serial_struct *req) +{ + return -1; +} + +void unregister_serial(int line) +{ +} diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h new file mode 100644 index 000000000000..1800c0e7531a --- /dev/null +++ b/drivers/serial/crisv10.h @@ -0,0 +1,137 @@ +/* + * serial.h: Arch-dep definitions for the Etrax100 serial driver. + * + * Copyright (C) 1998, 1999, 2000 Axis Communications AB + */ + +#ifndef _ETRAX_SERIAL_H +#define _ETRAX_SERIAL_H + +#include +#include +#include + +/* Software state per channel */ + +#ifdef __KERNEL__ +/* + * This is our internal structure for each serial port's state. + * + * Many fields are paralleled by the structure used by the serial_struct + * structure. + * + * For definitions of the flags field, see tty.h + */ + +#define SERIAL_RECV_DESCRIPTORS 8 + +struct etrax_recv_buffer { + struct etrax_recv_buffer *next; + unsigned short length; + unsigned char error; + unsigned char pad; + + unsigned char buffer[0]; +}; + +struct e100_serial { + int baud; + volatile u8 *port; /* R_SERIALx_CTRL */ + u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */ + + /* Output registers */ + volatile u8 *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ + volatile u32 *ofirstadr; /* adr to R_DMA_CHx_FIRST */ + volatile u8 *ocmdadr; /* adr to R_DMA_CHx_CMD */ + const volatile u8 *ostatusadr; /* adr to R_DMA_CHx_STATUS */ + + /* Input registers */ + volatile u8 *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */ + volatile u32 *ifirstadr; /* adr to R_DMA_CHx_FIRST */ + volatile u8 *icmdadr; /* adr to R_DMA_CHx_CMD */ + volatile u32 *idescradr; /* adr to R_DMA_CHx_DESCR */ + + int flags; /* defined in tty.h */ + + u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */ + u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */ + u8 iseteop; /* bit number for R_SET_EOP for the input dma */ + int enabled; /* Set to 1 if the port is enabled in HW config */ + + u8 dma_out_enabled:1; /* Set to 1 if DMA should be used */ + u8 dma_in_enabled:1; /* Set to 1 if DMA should be used */ + + /* end of fields defined in rs_table[] in .c-file */ + u8 uses_dma_in; /* Set to 1 if DMA is used */ + u8 uses_dma_out; /* Set to 1 if DMA is used */ + u8 forced_eop; /* a fifo eop has been forced */ + int baud_base; /* For special baudrates */ + int custom_divisor; /* For special baudrates */ + struct etrax_dma_descr tr_descr; + struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS]; + int cur_rec_descr; + + volatile int tr_running; /* 1 if output is running */ + + struct tty_struct *tty; + int read_status_mask; + int ignore_status_mask; + int x_char; /* xon/xoff character */ + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + unsigned long last_active; + int line; + int type; /* PORT_ETRAX */ + int count; /* # of fd on device */ + int blocked_open; /* # of blocked opens */ + struct circ_buf xmit; + struct etrax_recv_buffer *first_recv_buffer; + struct etrax_recv_buffer *last_recv_buffer; + unsigned int recv_cnt; + unsigned int max_recv_cnt; + + struct work_struct work; + struct async_icount icount; /* error-statistics etc.*/ + struct termios normal_termios; + struct termios callout_termios; +#ifdef DECLARE_WAITQUEUE + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; +#else + struct wait_queue *open_wait; + struct wait_queue *close_wait; +#endif + + unsigned long char_time_usec; /* The time for 1 char, in usecs */ + unsigned long flush_time_usec; /* How often we should flush */ + unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */ + unsigned long last_tx_active; /* Last tx time in jiffies */ + unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */ + unsigned long last_rx_active; /* Last rx time in jiffies */ + + int break_detected_cnt; + int errorcode; + +#ifdef CONFIG_ETRAX_RS485 + struct rs485_control rs485; /* RS-485 support */ +#endif +}; + +/* this PORT is not in the standard serial.h. it's not actually used for + * anything since we only have one type of async serial-port anyway in this + * system. + */ + +#define PORT_ETRAX 1 + +/* + * Events are used to schedule things to happen at timer-interrupt + * time, instead of at rs interrupt time. + */ +#define RS_EVENT_WRITE_WAKEUP 0 + +#endif /* __KERNEL__ */ + +#endif /* !_ETRAX_SERIAL_H */ diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c new file mode 100644 index 000000000000..97824eeeafae --- /dev/null +++ b/drivers/serial/dz.c @@ -0,0 +1,822 @@ +/* + * dz.c: Serial port driver for DECStations equiped + * with the DZ chipset. + * + * Copyright (C) 1998 Olivier A. D. Lebaillif + * + * Email: olivier.lebaillif@ifrsys.com + * + * [31-AUG-98] triemer + * Changed IRQ to use Harald's dec internals interrupts.h + * removed base_addr code - moving address assignment to setup.c + * Changed name of dz_init to rs_init to be consistent with tc code + * [13-NOV-98] triemer fixed code to receive characters + * after patches by harald to irq code. + * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout + * field from "current" - somewhere between 2.1.121 and 2.1.131 + Qua Jun 27 15:02:26 BRT 2001 + * [27-JUN-2001] Arnaldo Carvalho de Melo - cleanups + * + * Parts (C) 1999 David Airlie, airlied@linux.ie + * [07-SEP-99] Bugfixes + * + * [06-Jan-2002] Russell King + * Converted to new serial core + */ + +#undef DEBUG_DZ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CONSOLE_LINE (3) /* for definition of struct console */ + +#include "dz.h" + +#define DZ_INTR_DEBUG 1 + +static char *dz_name = "DECstation DZ serial driver version "; +static char *dz_version = "1.02"; + +struct dz_port { + struct uart_port port; + unsigned int cflag; +}; + +static struct dz_port dz_ports[DZ_NB_PORT]; + +#ifdef DEBUG_DZ +/* + * debugging code to send out chars via prom + */ +static void debug_console(const char *s, int count) +{ + unsigned i; + + for (i = 0; i < count; i++) { + if (*s == 10) + prom_printf("%c", 13); + prom_printf("%c", *s++); + } +} +#endif + +/* + * ------------------------------------------------------------ + * dz_in () and dz_out () + * + * These routines are used to access the registers of the DZ + * chip, hiding relocation differences between implementation. + * ------------------------------------------------------------ + */ + +static inline unsigned short dz_in(struct dz_port *dport, unsigned offset) +{ + volatile unsigned short *addr = + (volatile unsigned short *) (dport->port.membase + offset); + return *addr; +} + +static inline void dz_out(struct dz_port *dport, unsigned offset, + unsigned short value) +{ + volatile unsigned short *addr = + (volatile unsigned short *) (dport->port.membase + offset); + *addr = value; +} + +/* + * ------------------------------------------------------------ + * rs_stop () and rs_start () + * + * These routines are called before setting or resetting + * tty->stopped. They enable or disable transmitter interrupts, + * as necessary. + * ------------------------------------------------------------ + */ + +static void dz_stop_tx(struct uart_port *uport, unsigned int tty_stop) +{ + struct dz_port *dport = (struct dz_port *)uport; + unsigned short tmp, mask = 1 << dport->port.line; + unsigned long flags; + + spin_lock_irqsave(&dport->port.lock, flags); + tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ + tmp &= ~mask; /* clear the TX flag */ + dz_out(dport, DZ_TCR, tmp); + spin_unlock_irqrestore(&dport->port.lock, flags); +} + +static void dz_start_tx(struct uart_port *uport, unsigned int tty_start) +{ + struct dz_port *dport = (struct dz_port *)uport; + unsigned short tmp, mask = 1 << dport->port.line; + unsigned long flags; + + spin_lock_irqsave(&dport->port.lock, flags); + tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ + tmp |= mask; /* set the TX flag */ + dz_out(dport, DZ_TCR, tmp); + spin_unlock_irqrestore(&dport->port.lock, flags); +} + +static void dz_stop_rx(struct uart_port *uport) +{ + struct dz_port *dport = (struct dz_port *)uport; + unsigned long flags; + + spin_lock_irqsave(&dport->port.lock, flags); + dport->cflag &= ~DZ_CREAD; + dz_out(dport, DZ_LPR, dport->cflag); + spin_unlock_irqrestore(&dport->port.lock, flags); +} + +static void dz_enable_ms(struct uart_port *port) +{ + /* nothing to do */ +} + +/* + * ------------------------------------------------------------ + * Here starts the interrupt handling routines. All of the + * following subroutines are declared as inline and are folded + * into dz_interrupt. They were separated out for readability's + * sake. + * + * Note: rs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * rs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * make drivers/serial/dz.s + * + * and look at the resulting assemble code in dz.s. + * + * ------------------------------------------------------------ + */ + +/* + * ------------------------------------------------------------ + * receive_char () + * + * This routine deals with inputs from any lines. + * ------------------------------------------------------------ + */ +static inline void dz_receive_chars(struct dz_port *dport) +{ + struct tty_struct *tty = NULL; + struct uart_icount *icount; + int ignore = 0; + unsigned short status, tmp; + unsigned char ch, flag; + + /* this code is going to be a problem... + the call to tty_flip_buffer is going to need + to be rethought... + */ + do { + status = dz_in(dport, DZ_RBUF); + + /* punt so we don't get duplicate characters */ + if (!(status & DZ_DVAL)) + goto ignore_char; + + + ch = UCHAR(status); /* grab the char */ + flag = TTY_NORMAL; + +#if 0 + if (info->is_console) { + if (ch == 0) + return; /* it's a break ... */ + } +#endif + + tty = dport->port.info->tty;/* now tty points to the proper dev */ + icount = &dport->port.icount; + + if (!tty) + break; + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + break; + + icount->rx++; + + /* keep track of the statistics */ + if (status & (DZ_OERR | DZ_FERR | DZ_PERR)) { + if (status & DZ_PERR) /* parity error */ + icount->parity++; + else if (status & DZ_FERR) /* frame error */ + icount->frame++; + if (status & DZ_OERR) /* overrun error */ + icount->overrun++; + + /* check to see if we should ignore the character + and mask off conditions that should be ignored + */ + + if (status & dport->port.ignore_status_mask) { + if (++ignore > 100) + break; + goto ignore_char; + } + /* mask off the error conditions we want to ignore */ + tmp = status & dport->port.read_status_mask; + + if (tmp & DZ_PERR) { + flag = TTY_PARITY; +#ifdef DEBUG_DZ + debug_console("PERR\n", 5); +#endif + } else if (tmp & DZ_FERR) { + flag = TTY_FRAME; +#ifdef DEBUG_DZ + debug_console("FERR\n", 5); +#endif + } + if (tmp & DZ_OERR) { +#ifdef DEBUG_DZ + debug_console("OERR\n", 5); +#endif + tty_insert_flip_char(tty, ch, flag); + ch = 0; + flag = TTY_OVERRUN; + } + } + tty_insert_flip_char(tty, ch, flag); + ignore_char: + } while (status & DZ_DVAL); + + if (tty) + tty_flip_buffer_push(tty); +} + +/* + * ------------------------------------------------------------ + * transmit_char () + * + * This routine deals with outputs to any lines. + * ------------------------------------------------------------ + */ +static inline void dz_transmit_chars(struct dz_port *dport) +{ + struct circ_buf *xmit = &dport->port.info->xmit; + unsigned char tmp; + + if (dport->port.x_char) { /* XON/XOFF chars */ + dz_out(dport, DZ_TDR, dport->port.x_char); + dport->port.icount.tx++; + dport->port.x_char = 0; + return; + } + /* if nothing to do or stopped or hardware stopped */ + if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) { + dz_stop_tx(&dport->port, 0); + return; + } + + /* + * if something to do ... (rember the dz has no output fifo so we go + * one char at a time :-< + */ + tmp = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1); + dz_out(dport, DZ_TDR, tmp); + dport->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS) + uart_write_wakeup(&dport->port); + + /* Are we done */ + if (uart_circ_empty(xmit)) + dz_stop_tx(&dport->port, 0); +} + +/* + * ------------------------------------------------------------ + * check_modem_status () + * + * Only valid for the MODEM line duh ! + * ------------------------------------------------------------ + */ +static inline void check_modem_status(struct dz_port *dport) +{ + unsigned short status; + + /* if not ne modem line just return */ + if (dport->port.line != DZ_MODEM) + return; + + status = dz_in(dport, DZ_MSR); + + /* it's easy, since DSR2 is the only bit in the register */ + if (status) + dport->port.icount.dsr++; +} + +/* + * ------------------------------------------------------------ + * dz_interrupt () + * + * this is the main interrupt routine for the DZ chip. + * It deals with the multiple ports. + * ------------------------------------------------------------ + */ +static irqreturn_t dz_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + struct dz_port *dport; + unsigned short status; + + /* get the reason why we just got an irq */ + status = dz_in((struct dz_port *)dev, DZ_CSR); + dport = &dz_ports[LINE(status)]; + + if (status & DZ_RDONE) + dz_receive_chars(dport); + + if (status & DZ_TRDY) + dz_transmit_chars(dport); + + /* FIXME: what about check modem status??? --rmk */ + + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the DZ interrupt routines. + * ------------------------------------------------------------------- + */ + +static unsigned int dz_get_mctrl(struct uart_port *uport) +{ + struct dz_port *dport = (struct dz_port *)uport; + unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + + if (dport->port.line == DZ_MODEM) { + /* + * CHECKME: This is a guess from the other code... --rmk + */ + if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR) + mctrl &= ~TIOCM_DSR; + } + + return mctrl; +} + +static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl) +{ + struct dz_port *dport = (struct dz_port *)uport; + unsigned short tmp; + + if (dport->port.line == DZ_MODEM) { + tmp = dz_in(dport, DZ_TCR); + if (mctrl & TIOCM_DTR) + tmp &= ~DZ_MODEM_DTR; + else + tmp |= DZ_MODEM_DTR; + dz_out(dport, DZ_TCR, tmp); + } +} + +/* + * ------------------------------------------------------------------- + * startup () + * + * various initialization tasks + * ------------------------------------------------------------------- + */ +static int dz_startup(struct uart_port *uport) +{ + struct dz_port *dport = (struct dz_port *)uport; + unsigned long flags; + unsigned short tmp; + + /* The dz lines for the mouse/keyboard must be + * opened using their respective drivers. + */ + if ((dport->port.line == DZ_KEYBOARD) || + (dport->port.line == DZ_MOUSE)) + return -ENODEV; + + spin_lock_irqsave(&dport->port.lock, flags); + + /* enable the interrupt and the scanning */ + tmp = dz_in(dport, DZ_CSR); + tmp |= DZ_RIE | DZ_TIE | DZ_MSE; + dz_out(dport, DZ_CSR, tmp); + + spin_unlock_irqrestore(&dport->port.lock, flags); + + return 0; +} + +/* + * ------------------------------------------------------------------- + * shutdown () + * + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + * ------------------------------------------------------------------- + */ +static void dz_shutdown(struct uart_port *uport) +{ + dz_stop_tx(uport, 0); +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static unsigned int dz_tx_empty(struct uart_port *uport) +{ + struct dz_port *dport = (struct dz_port *)uport; + unsigned short status = dz_in(dport, DZ_LPR); + + /* FIXME: this appears to be obviously broken --rmk. */ + return status ? TIOCSER_TEMT : 0; +} + +static void dz_break_ctl(struct uart_port *uport, int break_state) +{ + struct dz_port *dport = (struct dz_port *)uport; + unsigned long flags; + unsigned short tmp, mask = 1 << uport->line; + + spin_lock_irqsave(&uport->lock, flags); + tmp = dz_in(dport, DZ_TCR); + if (break_state) + tmp |= mask; + else + tmp &= ~mask; + dz_out(dport, DZ_TCR, tmp); + spin_unlock_irqrestore(&uport->lock, flags); +} + +static void dz_set_termios(struct uart_port *uport, struct termios *termios, + struct termios *old_termios) +{ + struct dz_port *dport = (struct dz_port *)uport; + unsigned long flags; + unsigned int cflag, baud; + + cflag = dport->port.line; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cflag |= DZ_CS5; + break; + case CS6: + cflag |= DZ_CS6; + break; + case CS7: + cflag |= DZ_CS7; + break; + case CS8: + default: + cflag |= DZ_CS8; + } + + if (termios->c_cflag & CSTOPB) + cflag |= DZ_CSTOPB; + if (termios->c_cflag & PARENB) + cflag |= DZ_PARENB; + if (termios->c_cflag & PARODD) + cflag |= DZ_PARODD; + + baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600); + switch (baud) { + case 50: + cflag |= DZ_B50; + break; + case 75: + cflag |= DZ_B75; + break; + case 110: + cflag |= DZ_B110; + break; + case 134: + cflag |= DZ_B134; + break; + case 150: + cflag |= DZ_B150; + break; + case 300: + cflag |= DZ_B300; + break; + case 600: + cflag |= DZ_B600; + break; + case 1200: + cflag |= DZ_B1200; + break; + case 1800: + cflag |= DZ_B1800; + break; + case 2000: + cflag |= DZ_B2000; + break; + case 2400: + cflag |= DZ_B2400; + break; + case 3600: + cflag |= DZ_B3600; + break; + case 4800: + cflag |= DZ_B4800; + break; + case 7200: + cflag |= DZ_B7200; + break; + case 9600: + default: + cflag |= DZ_B9600; + } + + if (termios->c_cflag & CREAD) + cflag |= DZ_RXENAB; + + spin_lock_irqsave(&dport->port.lock, flags); + + dz_out(dport, DZ_LPR, cflag); + dport->cflag = cflag; + + /* setup accept flag */ + dport->port.read_status_mask = DZ_OERR; + if (termios->c_iflag & INPCK) + dport->port.read_status_mask |= DZ_FERR | DZ_PERR; + + /* characters to ignore */ + uport->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR; + + spin_unlock_irqrestore(&dport->port.lock, flags); +} + +static const char *dz_type(struct uart_port *port) +{ + return "DZ"; +} + +static void dz_release_port(struct uart_port *port) +{ + /* nothing to do */ +} + +static int dz_request_port(struct uart_port *port) +{ + return 0; +} + +static void dz_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_DZ; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int dz_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ) + ret = -EINVAL; + if (ser->irq != port->irq) + ret = -EINVAL; + return ret; +} + +static struct uart_ops dz_ops = { + .tx_empty = dz_tx_empty, + .get_mctrl = dz_get_mctrl, + .set_mctrl = dz_set_mctrl, + .stop_tx = dz_stop_tx, + .start_tx = dz_start_tx, + .stop_rx = dz_stop_rx, + .enable_ms = dz_enable_ms, + .break_ctl = dz_break_ctl, + .startup = dz_startup, + .shutdown = dz_shutdown, + .set_termios = dz_set_termios, + .type = dz_type, + .release_port = dz_release_port, + .request_port = dz_request_port, + .config_port = dz_config_port, + .verify_port = dz_verify_port, +}; + +static void __init dz_init_ports(void) +{ + static int first = 1; + struct dz_port *dport; + unsigned long base; + int i; + + if (!first) + return; + first = 0; + + if (mips_machtype == MACH_DS23100 || + mips_machtype == MACH_DS5100) + base = (unsigned long) KN01_DZ11_BASE; + else + base = (unsigned long) KN02_DZ11_BASE; + + for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) { + spin_lock_init(&dport->port.lock); + dport->port.membase = (char *) base; + dport->port.iotype = SERIAL_IO_PORT; + dport->port.irq = dec_interrupt[DEC_IRQ_DZ11]; + dport->port.line = i; + dport->port.fifosize = 1; + dport->port.ops = &dz_ops; + dport->port.flags = UPF_BOOT_AUTOCONF; + } +} + +static void dz_reset(struct dz_port *dport) +{ + dz_out(dport, DZ_CSR, DZ_CLR); + + while (dz_in(dport, DZ_CSR) & DZ_CLR); + /* FIXME: cpu_relax? */ + + iob(); + + /* enable scanning */ + dz_out(dport, DZ_CSR, DZ_MSE); +} + +#ifdef CONFIG_SERIAL_DZ_CONSOLE +static void dz_console_put_char(struct dz_port *dport, unsigned char ch) +{ + unsigned long flags; + int loops = 2500; + unsigned short tmp = ch; + /* this code sends stuff out to serial device - spinning its + wheels and waiting. */ + + spin_lock_irqsave(&dport->port.lock, flags); + + /* spin our wheels */ + while (((dz_in(dport, DZ_CSR) & DZ_TRDY) != DZ_TRDY) && loops--) + /* FIXME: cpu_relax, udelay? --rmk */ + ; + + /* Actually transmit the character. */ + dz_out(dport, DZ_TDR, tmp); + + spin_unlock_irqrestore(&dport->port.lock, flags); +} +/* + * ------------------------------------------------------------------- + * dz_console_print () + * + * dz_console_print is registered for printk. + * The console must be locked when we get here. + * ------------------------------------------------------------------- + */ +static void dz_console_print(struct console *cons, + const char *str, + unsigned int count) +{ + struct dz_port *dport = &dz_ports[CONSOLE_LINE]; +#ifdef DEBUG_DZ + prom_printf((char *) str); +#endif + while (count--) { + if (*str == '\n') + dz_console_put_char(dport, '\r'); + dz_console_put_char(dport, *str++); + } +} + +static int __init dz_console_setup(struct console *co, char *options) +{ + struct dz_port *dport = &dz_ports[CONSOLE_LINE]; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + unsigned short mask, tmp; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + dz_reset(dport); + + ret = uart_set_options(&dport->port, co, baud, parity, bits, flow); + if (ret == 0) { + mask = 1 << dport->port.line; + tmp = dz_in(dport, DZ_TCR); /* read the TX flag */ + if (!(tmp & mask)) { + tmp |= mask; /* set the TX flag */ + dz_out(dport, DZ_TCR, tmp); + } + } + + return ret; +} + +static struct console dz_sercons = +{ + .name = "ttyS", + .write = dz_console_print, + .device = uart_console_device, + .setup = dz_console_setup, + .flags = CON_CONSDEV | CON_PRINTBUFFER, + .index = CONSOLE_LINE, +}; + +void __init dz_serial_console_init(void) +{ + dz_init_ports(); + + register_console(&dz_sercons); +} + +#define SERIAL_DZ_CONSOLE &dz_sercons +#else +#define SERIAL_DZ_CONSOLE NULL +#endif /* CONFIG_SERIAL_DZ_CONSOLE */ + +static struct uart_driver dz_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", +#ifdef CONFIG_DEVFS + .dev_name = "tts/%d", +#else + .dev_name = "ttyS%d", +#endif + .major = TTY_MAJOR, + .minor = 64, + .nr = DZ_NB_PORT, + .cons = SERIAL_DZ_CONSOLE, +}; + +int __init dz_init(void) +{ + unsigned long flags; + int ret, i; + + printk("%s%s\n", dz_name, dz_version); + + dz_init_ports(); + + save_flags(flags); + cli(); + +#ifndef CONFIG_SERIAL_DZ_CONSOLE + /* reset the chip */ + dz_reset(&dz_ports[0]); +#endif + + /* order matters here... the trick is that flags + is updated... in request_irq - to immediatedly obliterate + it is unwise. */ + restore_flags(flags); + + if (request_irq(dz_ports[0].port.irq, dz_interrupt, + SA_INTERRUPT, "DZ", &dz_ports[0])) + panic("Unable to register DZ interrupt"); + + ret = uart_register_driver(&dz_reg); + if (ret != 0) + return ret; + + for (i = 0; i < DZ_NB_PORT; i++) + uart_add_one_port(&dz_reg, &dz_ports[i].port); + + return ret; +} + +MODULE_DESCRIPTION("DECstation DZ serial driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/dz.h b/drivers/serial/dz.h new file mode 100644 index 000000000000..86ef417382bb --- /dev/null +++ b/drivers/serial/dz.h @@ -0,0 +1,118 @@ +/* + * dz.h: Serial port driver for DECStations equiped + * with the DZ chipset. + * + * Copyright (C) 1998 Olivier A. D. Lebaillif + * + * Email: olivier.lebaillif@ifrsys.com + * + */ +#ifndef DZ_SERIAL_H +#define DZ_SERIAL_H + +/* + * Definitions for the Control and Status Received. + */ +#define DZ_TRDY 0x8000 /* Transmitter empty */ +#define DZ_TIE 0x4000 /* Transmitter Interrupt Enable */ +#define DZ_RDONE 0x0080 /* Receiver data ready */ +#define DZ_RIE 0x0040 /* Receive Interrupt Enable */ +#define DZ_MSE 0x0020 /* Master Scan Enable */ +#define DZ_CLR 0x0010 /* Master reset */ +#define DZ_MAINT 0x0008 /* Loop Back Mode */ + +/* + * Definitions for the Received buffer. + */ +#define DZ_RBUF_MASK 0x00FF /* Data Mask in the Receive Buffer */ +#define DZ_LINE_MASK 0x0300 /* Line Mask in the Receive Buffer */ +#define DZ_DVAL 0x8000 /* Valid Data indicator */ +#define DZ_OERR 0x4000 /* Overrun error indicator */ +#define DZ_FERR 0x2000 /* Frame error indicator */ +#define DZ_PERR 0x1000 /* Parity error indicator */ + +#define LINE(x) (x & DZ_LINE_MASK) >> 8 /* Get the line number from the input buffer */ +#define UCHAR(x) (unsigned char)(x & DZ_RBUF_MASK) + +/* + * Definitions for the Transmit Register. + */ +#define DZ_LINE_KEYBOARD 0x0001 +#define DZ_LINE_MOUSE 0x0002 +#define DZ_LINE_MODEM 0x0004 +#define DZ_LINE_PRINTER 0x0008 + +#define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */ + +/* + * Definitions for the Modem Status Register. + */ +#define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */ + +/* + * Definitions for the Transmit Data Register. + */ +#define DZ_BRK0 0x0100 /* Break assertion for line 0 */ +#define DZ_BRK1 0x0200 /* Break assertion for line 1 */ +#define DZ_BRK2 0x0400 /* Break assertion for line 2 */ +#define DZ_BRK3 0x0800 /* Break assertion for line 3 */ + +/* + * Definitions for the Line Parameter Register. + */ +#define DZ_KEYBOARD 0x0000 /* line 0 = keyboard */ +#define DZ_MOUSE 0x0001 /* line 1 = mouse */ +#define DZ_MODEM 0x0002 /* line 2 = modem */ +#define DZ_PRINTER 0x0003 /* line 3 = printer */ + +#define DZ_CSIZE 0x0018 /* Number of bits per byte (mask) */ +#define DZ_CS5 0x0000 /* 5 bits per byte */ +#define DZ_CS6 0x0008 /* 6 bits per byte */ +#define DZ_CS7 0x0010 /* 7 bits per byte */ +#define DZ_CS8 0x0018 /* 8 bits per byte */ + +#define DZ_CSTOPB 0x0020 /* 2 stop bits instead of one */ + +#define DZ_PARENB 0x0040 /* Parity enable */ +#define DZ_PARODD 0x0080 /* Odd parity instead of even */ + +#define DZ_CBAUD 0x0E00 /* Baud Rate (mask) */ +#define DZ_B50 0x0000 +#define DZ_B75 0x0100 +#define DZ_B110 0x0200 +#define DZ_B134 0x0300 +#define DZ_B150 0x0400 +#define DZ_B300 0x0500 +#define DZ_B600 0x0600 +#define DZ_B1200 0x0700 +#define DZ_B1800 0x0800 +#define DZ_B2000 0x0900 +#define DZ_B2400 0x0A00 +#define DZ_B3600 0x0B00 +#define DZ_B4800 0x0C00 +#define DZ_B7200 0x0D00 +#define DZ_B9600 0x0E00 + +#define DZ_CREAD 0x1000 /* Enable receiver */ +#define DZ_RXENAB 0x1000 /* enable receive char */ +/* + * Addresses for the DZ registers + */ +#define DZ_CSR 0x00 /* Control and Status Register */ +#define DZ_RBUF 0x08 /* Receive Buffer */ +#define DZ_LPR 0x08 /* Line Parameters Register */ +#define DZ_TCR 0x10 /* Transmitter Control Register */ +#define DZ_MSR 0x18 /* Modem Status Register */ +#define DZ_TDR 0x18 /* Transmit Data Register */ + +#define DZ_NB_PORT 4 + +#define DZ_XMIT_SIZE 4096 /* buffer size */ +#define DZ_WAKEUP_CHARS DZ_XMIT_SIZE/4 + +#ifdef MODULE +int init_module (void) +void cleanup_module (void) +#endif + +#endif /* DZ_SERIAL_H */ diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c new file mode 100644 index 000000000000..546a0bc77e1e --- /dev/null +++ b/drivers/serial/icom.c @@ -0,0 +1,1691 @@ +/* + * icom.c + * + * Copyright (C) 2001 IBM Corporation. All rights reserved. + * + * Serial device driver. + * + * Based on code from serial.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#define SERIAL_DO_RESTART +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "icom.h" + +/*#define ICOM_TRACE enable port trace capabilities */ + +#define ICOM_DRIVER_NAME "icom" +#define ICOM_VERSION_STR "1.3.1" +#define NR_PORTS 128 +#define ICOM_PORT ((struct icom_port *)port) +#define to_icom_adapter(d) container_of(d, struct icom_adapter, kobj) + +static const struct pci_device_id icom_pci_table[] = { + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = ADAPTER_V1, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM, + .driver_data = ADAPTER_V2, + }, + { + .vendor = PCI_VENDOR_ID_IBM, + .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2, + .subvendor = PCI_VENDOR_ID_IBM, + .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL, + .driver_data = ADAPTER_V2, + }, + {} +}; + +struct lookup_proc_table start_proc[4] = { + {NULL, ICOM_CONTROL_START_A}, + {NULL, ICOM_CONTROL_START_B}, + {NULL, ICOM_CONTROL_START_C}, + {NULL, ICOM_CONTROL_START_D} +}; + + +struct lookup_proc_table stop_proc[4] = { + {NULL, ICOM_CONTROL_STOP_A}, + {NULL, ICOM_CONTROL_STOP_B}, + {NULL, ICOM_CONTROL_STOP_C}, + {NULL, ICOM_CONTROL_STOP_D} +}; + +struct lookup_int_table int_mask_tbl[4] = { + {NULL, ICOM_INT_MASK_PRC_A}, + {NULL, ICOM_INT_MASK_PRC_B}, + {NULL, ICOM_INT_MASK_PRC_C}, + {NULL, ICOM_INT_MASK_PRC_D}, +}; + + +MODULE_DEVICE_TABLE(pci, icom_pci_table); + +static LIST_HEAD(icom_adapter_head); + +/* spinlock for adapter initialization and changing adapter operations */ +static spinlock_t icom_lock; + +#ifdef ICOM_TRACE +static inline void trace(struct icom_port *, char *, unsigned long) {}; +#else +static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {}; +#endif + +static void free_port_memory(struct icom_port *icom_port) +{ + struct pci_dev *dev = icom_port->adapter->pci_dev; + + trace(icom_port, "RET_PORT_MEM", 0); + if (icom_port->recv_buf) { + pci_free_consistent(dev, 4096, icom_port->recv_buf, + icom_port->recv_buf_pci); + icom_port->recv_buf = NULL; + } + if (icom_port->xmit_buf) { + pci_free_consistent(dev, 4096, icom_port->xmit_buf, + icom_port->xmit_buf_pci); + icom_port->xmit_buf = NULL; + } + if (icom_port->statStg) { + pci_free_consistent(dev, 4096, icom_port->statStg, + icom_port->statStg_pci); + icom_port->statStg = NULL; + } + + if (icom_port->xmitRestart) { + pci_free_consistent(dev, 4096, icom_port->xmitRestart, + icom_port->xmitRestart_pci); + icom_port->xmitRestart = NULL; + } +} + +static int __init get_port_memory(struct icom_port *icom_port) +{ + int index; + unsigned long stgAddr; + unsigned long startStgAddr; + unsigned long offset; + struct pci_dev *dev = icom_port->adapter->pci_dev; + + icom_port->xmit_buf = + pci_alloc_consistent(dev, 4096, &icom_port->xmit_buf_pci); + if (!icom_port->xmit_buf) { + dev_err(&dev->dev, "Can not allocate Transmit buffer\n"); + return -ENOMEM; + } + + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->xmit_buf); + + icom_port->recv_buf = + pci_alloc_consistent(dev, 4096, &icom_port->recv_buf_pci); + if (!icom_port->recv_buf) { + dev_err(&dev->dev, "Can not allocate Receive buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->recv_buf); + + icom_port->statStg = + pci_alloc_consistent(dev, 4096, &icom_port->statStg_pci); + if (!icom_port->statStg) { + dev_err(&dev->dev, "Can not allocate Status buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + trace(icom_port, "GET_PORT_MEM", + (unsigned long) icom_port->statStg); + + icom_port->xmitRestart = + pci_alloc_consistent(dev, 4096, &icom_port->xmitRestart_pci); + if (!icom_port->xmitRestart) { + dev_err(&dev->dev, + "Can not allocate xmit Restart buffer\n"); + free_port_memory(icom_port); + return -ENOMEM; + } + + memset(icom_port->statStg, 0, 4096); + + /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that + indicates that frames are to be transmitted + */ + + stgAddr = (unsigned long) icom_port->statStg; + for (index = 0; index < NUM_XBUFFS; index++) { + trace(icom_port, "FOD_ADDR", stgAddr); + stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]); + if (index < (NUM_XBUFFS - 1)) { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + icom_port->statStg->xmit[index].leLengthASD = + (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); + trace(icom_port, "FOD_ADDR", stgAddr); + trace(icom_port, "FOD_XBUFF", + (unsigned long) icom_port->xmit_buf); + icom_port->statStg->xmit[index].leBuffer = + cpu_to_le32(icom_port->xmit_buf_pci); + } else if (index == (NUM_XBUFFS - 1)) { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + icom_port->statStg->xmit[index].leLengthASD = + (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ); + trace(icom_port, "FOD_XBUFF", + (unsigned long) icom_port->xmit_buf); + icom_port->statStg->xmit[index].leBuffer = + cpu_to_le32(icom_port->xmit_buf_pci); + } else { + memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area)); + } + } + /* FIDs */ + startStgAddr = stgAddr; + + /* fill in every entry, even if no buffer */ + for (index = 0; index < NUM_RBUFFS; index++) { + trace(icom_port, "FID_ADDR", stgAddr); + stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]); + icom_port->statStg->rcv[index].leLength = 0; + icom_port->statStg->rcv[index].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + if (index < (NUM_RBUFFS - 1) ) { + offset = stgAddr - (unsigned long) icom_port->statStg; + icom_port->statStg->rcv[index].leNext = + cpu_to_le32(icom_port-> statStg_pci + offset); + trace(icom_port, "FID_RBUFF", + (unsigned long) icom_port->recv_buf); + icom_port->statStg->rcv[index].leBuffer = + cpu_to_le32(icom_port->recv_buf_pci); + } else if (index == (NUM_RBUFFS -1) ) { + offset = startStgAddr - (unsigned long) icom_port->statStg; + icom_port->statStg->rcv[index].leNext = + cpu_to_le32(icom_port-> statStg_pci + offset); + trace(icom_port, "FID_RBUFF", + (unsigned long) icom_port->recv_buf + 2048); + icom_port->statStg->rcv[index].leBuffer = + cpu_to_le32(icom_port->recv_buf_pci + 2048); + } else { + icom_port->statStg->rcv[index].leNext = 0; + icom_port->statStg->rcv[index].leBuffer = 0; + } + } + + return 0; +} + +static void stop_processor(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + + port = icom_port->port; + if (port == 0 || port == 1) + stop_proc[port].global_control_reg = &icom_port->global_reg->control; + else + stop_proc[port].global_control_reg = &icom_port->global_reg->control_2; + + + if (port < 4) { + temp = readl(stop_proc[port].global_control_reg); + temp = + (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id; + writel(temp, stop_proc[port].global_control_reg); + + /* write flush */ + readl(stop_proc[port].global_control_reg); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + + spin_unlock_irqrestore(&icom_lock, flags); +} + +static void start_processor(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + + port = icom_port->port; + if (port == 0 || port == 1) + start_proc[port].global_control_reg = &icom_port->global_reg->control; + else + start_proc[port].global_control_reg = &icom_port->global_reg->control_2; + if (port < 4) { + temp = readl(start_proc[port].global_control_reg); + temp = + (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id; + writel(temp, start_proc[port].global_control_reg); + + /* write flush */ + readl(start_proc[port].global_control_reg); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + + spin_unlock_irqrestore(&icom_lock, flags); +} + +static void load_code(struct icom_port *icom_port) +{ + const struct firmware *fw; + char __iomem *iram_ptr; + int index; + int status = 0; + void __iomem *dram_ptr = icom_port->dram; + dma_addr_t temp_pci; + unsigned char *new_page = NULL; + unsigned char cable_id = NO_CABLE; + struct pci_dev *dev = icom_port->adapter->pci_dev; + + /* Clear out any pending interrupts */ + writew(0x3FFF, icom_port->int_reg); + + trace(icom_port, "CLEAR_INTERRUPTS", 0); + + /* Stop processor */ + stop_processor(icom_port); + + /* Zero out DRAM */ + memset_io(dram_ptr, 0, 512); + + /* Load Call Setup into Adapter */ + if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_DCE_IRAM_OFFSET) { + dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET; + for (index = 0; index < fw->size; index++) + writeb(fw->data[index], &iram_ptr[index]); + + release_firmware(fw); + + /* Load Resident DCE portion of Adapter */ + if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_IRAM_SIZE) { + dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET; + for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++) + writeb(fw->data[index], &iram_ptr[index]); + + release_firmware(fw); + + /* Set Hardware level */ + if ((icom_port->adapter->version | ADAPTER_V2) == ADAPTER_V2) + writeb(V2_HARDWARE, &(icom_port->dram->misc_flags)); + + /* Start the processor in Adapter */ + start_processor(icom_port); + + writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL), + &(icom_port->dram->HDLCConfigReg)); + writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */ + writeb(0x00, &(icom_port->dram->CmdReg)); + writeb(0x10, &(icom_port->dram->async_config3)); + writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC | + ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2)); + + /*Set up data in icom DRAM to indicate where personality + *code is located and its length. + */ + new_page = pci_alloc_consistent(dev, 4096, &temp_pci); + + if (!new_page) { + dev_err(&dev->dev, "Can not allocate DMA buffer\n"); + status = -1; + goto load_code_exit; + } + + if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) { + dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n"); + status = -1; + goto load_code_exit; + } + + if (fw->size > ICOM_DCE_IRAM_OFFSET) { + dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n"); + release_firmware(fw); + status = -1; + goto load_code_exit; + } + + for (index = 0; index < fw->size; index++) + new_page[index] = fw->data[index]; + + release_firmware(fw); + + writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length); + writel(temp_pci, &icom_port->dram->mac_load_addr); + + /*Setting the syncReg to 0x80 causes adapter to start downloading + the personality code into adapter instruction RAM. + Once code is loaded, it will begin executing and, based on + information provided above, will start DMAing data from + shared memory to adapter DRAM. + */ + /* the wait loop below verifies this write operation has been done + and processed + */ + writeb(START_DOWNLOAD, &icom_port->dram->sync); + + /* Wait max 1 Sec for data download and processor to start */ + for (index = 0; index < 10; index++) { + msleep(100); + if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE) + break; + } + + if (index == 10) + status = -1; + + /* + * check Cable ID + */ + cable_id = readb(&icom_port->dram->cable_id); + + if (cable_id & ICOM_CABLE_ID_VALID) { + /* Get cable ID into the lower 4 bits (standard form) */ + cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4; + icom_port->cable_id = cable_id; + } else { + dev_err(&dev->dev,"Invalid or no cable attached\n"); + icom_port->cable_id = NO_CABLE; + } + + load_code_exit: + + if (status != 0) { + /* Clear out any pending interrupts */ + writew(0x3FFF, icom_port->int_reg); + + /* Turn off port */ + writeb(ICOM_DISABLE, &(icom_port->dram->disable)); + + /* Stop processor */ + stop_processor(icom_port); + + dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n"); + } + + if (new_page != NULL) + pci_free_consistent(dev, 4096, new_page, temp_pci); +} + +static int startup(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned char cable_id, raw_cable_id; + unsigned long flags; + int port; + + trace(icom_port, "STARTUP", 0); + + if (!icom_port->dram) { + /* should NEVER be NULL */ + dev_err(&icom_port->adapter->pci_dev->dev, + "Unusable Port, port configuration missing\n"); + return -ENODEV; + } + + /* + * check Cable ID + */ + raw_cable_id = readb(&icom_port->dram->cable_id); + trace(icom_port, "CABLE_ID", raw_cable_id); + + /* Get cable ID into the lower 4 bits (standard form) */ + cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; + + /* Check for valid Cable ID */ + if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || + (cable_id != icom_port->cable_id)) { + + /* reload adapter code, pick up any potential changes in cable id */ + load_code(icom_port); + + /* still no sign of cable, error out */ + raw_cable_id = readb(&icom_port->dram->cable_id); + cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4; + if (!(raw_cable_id & ICOM_CABLE_ID_VALID) || + (icom_port->cable_id == NO_CABLE)) + return -EIO; + } + + /* + * Finally, clear and enable interrupts + */ + spin_lock_irqsave(&icom_lock, flags); + port = icom_port->port; + if (port == 0 || port == 1) + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; + else + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; + + if (port == 0 || port == 2) + writew(0x00FF, icom_port->int_reg); + else + writew(0x3F00, icom_port->int_reg); + if (port < 4) { + temp = readl(int_mask_tbl[port].global_int_mask); + writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); + + /* write flush */ + readl(int_mask_tbl[port].global_int_mask); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + + spin_unlock_irqrestore(&icom_lock, flags); + return 0; +} + +static void shutdown(struct icom_port *icom_port) +{ + unsigned long temp; + unsigned char cmdReg; + unsigned long flags; + int port; + + spin_lock_irqsave(&icom_lock, flags); + trace(icom_port, "SHUTDOWN", 0); + + /* + * disable all interrupts + */ + port = icom_port->port; + if (port == 0 || port == 1) + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask; + else + int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2; + + if (port < 4) { + temp = readl(int_mask_tbl[port].global_int_mask); + writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask); + + /* write flush */ + readl(int_mask_tbl[port].global_int_mask); + } else { + dev_err(&icom_port->adapter->pci_dev->dev, + "Invalid port assignment\n"); + } + spin_unlock_irqrestore(&icom_lock, flags); + + /* + * disable break condition + */ + cmdReg = readb(&icom_port->dram->CmdReg); + if ((cmdReg | CMD_SND_BREAK) == CMD_SND_BREAK) { + writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg); + } +} + +static int icom_write(struct uart_port *port) +{ + unsigned long data_count; + unsigned char cmdReg; + unsigned long offset; + int temp_tail = port->info->xmit.tail; + + trace(ICOM_PORT, "WRITE", 0); + + if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & + SA_FLAGS_READY_TO_XMIT) { + trace(ICOM_PORT, "WRITE_FULL", 0); + return 0; + } + + data_count = 0; + while ((port->info->xmit.head != temp_tail) && + (data_count <= XMIT_BUFF_SZ)) { + + ICOM_PORT->xmit_buf[data_count++] = + port->info->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE - 1); + } + + if (data_count) { + ICOM_PORT->statStg->xmit[0].flags = + cpu_to_le16(SA_FLAGS_READY_TO_XMIT); + ICOM_PORT->statStg->xmit[0].leLength = + cpu_to_le16(data_count); + offset = + (unsigned long) &ICOM_PORT->statStg->xmit[0] - + (unsigned long) ICOM_PORT->statStg; + *ICOM_PORT->xmitRestart = + cpu_to_le32(ICOM_PORT->statStg_pci + offset); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg | CMD_XMIT_RCV_ENABLE, + &ICOM_PORT->dram->CmdReg); + writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd); + trace(ICOM_PORT, "WRITE_START", data_count); + /* write flush */ + readb(&ICOM_PORT->dram->StartXmitCmd); + } + + return data_count; +} + +static inline void check_modem_status(struct icom_port *icom_port) +{ + static char old_status = 0; + char delta_status; + unsigned char status; + + spin_lock(&icom_port->uart_port.lock); + + /*modem input register */ + status = readb(&icom_port->dram->isr); + trace(icom_port, "CHECK_MODEM", status); + delta_status = status ^ old_status; + if (delta_status) { + if (delta_status & ICOM_RI) + icom_port->uart_port.icount.rng++; + if (delta_status & ICOM_DSR) + icom_port->uart_port.icount.dsr++; + if (delta_status & ICOM_DCD) + uart_handle_dcd_change(&icom_port->uart_port, + delta_status & ICOM_DCD); + if (delta_status & ICOM_CTS) + uart_handle_cts_change(&icom_port->uart_port, + delta_status & ICOM_CTS); + + wake_up_interruptible(&icom_port->uart_port.info-> + delta_msr_wait); + old_status = status; + } + spin_unlock(&icom_port->uart_port.lock); +} + +static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port) +{ + unsigned short int count; + int i; + + if (port_int_reg & (INT_XMIT_COMPLETED)) { + trace(icom_port, "XMIT_COMPLETE", 0); + + /* clear buffer in use bit */ + icom_port->statStg->xmit[0].flags &= + cpu_to_le16(~SA_FLAGS_READY_TO_XMIT); + + count = (unsigned short int) + cpu_to_le16(icom_port->statStg->xmit[0].leLength); + icom_port->uart_port.icount.tx += count; + + for (i=0; iuart_port.info->xmit); i++) { + + icom_port->uart_port.info->xmit.tail++; + icom_port->uart_port.info->xmit.tail &= + (UART_XMIT_SIZE - 1); + } + + if (!icom_write(&icom_port->uart_port)) + /* activate write queue */ + uart_write_wakeup(&icom_port->uart_port); + } else + trace(icom_port, "XMIT_DISABLED", 0); +} + +static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port) +{ + short int count, rcv_buff; + struct tty_struct *tty = icom_port->uart_port.info->tty; + unsigned short int status; + struct uart_icount *icount; + unsigned long offset; + + trace(icom_port, "RCV_COMPLETE", 0); + rcv_buff = icom_port->next_rcv; + + status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); + while (status & SA_FL_RCV_DONE) { + + trace(icom_port, "FID_STATUS", status); + count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength); + + trace(icom_port, "RCV_COUNT", count); + if (count > (TTY_FLIPBUF_SIZE - tty->flip.count)) + count = TTY_FLIPBUF_SIZE - tty->flip.count; + + trace(icom_port, "REAL_COUNT", count); + + offset = + cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) - + icom_port->recv_buf_pci; + + memcpy(tty->flip.char_buf_ptr,(unsigned char *) + ((unsigned long)icom_port->recv_buf + offset), count); + + if (count > 0) { + tty->flip.count += count - 1; + tty->flip.char_buf_ptr += count - 1; + + memset(tty->flip.flag_buf_ptr, 0, count); + tty->flip.flag_buf_ptr += count - 1; + } + + icount = &icom_port->uart_port.icount; + icount->rx += count; + + /* Break detect logic */ + if ((status & SA_FLAGS_FRAME_ERROR) + && (tty->flip.char_buf_ptr[0] == 0x00)) { + status &= ~SA_FLAGS_FRAME_ERROR; + status |= SA_FLAGS_BREAK_DET; + trace(icom_port, "BREAK_DET", 0); + } + + if (status & + (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR | + SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) { + + if (status & SA_FLAGS_BREAK_DET) + icount->brk++; + if (status & SA_FLAGS_PARITY_ERROR) + icount->parity++; + if (status & SA_FLAGS_FRAME_ERROR) + icount->frame++; + if (status & SA_FLAGS_OVERRUN) + icount->overrun++; + + /* + * Now check to see if character should be + * ignored, and mask off conditions which + * should be ignored. + */ + if (status & icom_port->ignore_status_mask) { + trace(icom_port, "IGNORE_CHAR", 0); + goto ignore_char; + } + + status &= icom_port->read_status_mask; + + if (status & SA_FLAGS_BREAK_DET) { + *tty->flip.flag_buf_ptr = TTY_BREAK; + } else if (status & SA_FLAGS_PARITY_ERROR) { + trace(icom_port, "PARITY_ERROR", 0); + *tty->flip.flag_buf_ptr = TTY_PARITY; + } else if (status & SA_FLAGS_FRAME_ERROR) + *tty->flip.flag_buf_ptr = TTY_FRAME; + + if (status & SA_FLAGS_OVERRUN) { + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + if (tty->flip.count < TTY_FLIPBUF_SIZE) { + tty->flip.count++; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + } + } + } + + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + ignore_char: + icom_port->statStg->rcv[rcv_buff].flags = 0; + icom_port->statStg->rcv[rcv_buff].leLength = 0; + icom_port->statStg->rcv[rcv_buff].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + + rcv_buff++; + if (rcv_buff == NUM_RBUFFS) + rcv_buff = 0; + + status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags); + } + icom_port->next_rcv = rcv_buff; + tty_flip_buffer_push(tty); +} + +static void process_interrupt(u16 port_int_reg, + struct icom_port *icom_port) +{ + + spin_lock(&icom_port->uart_port.lock); + trace(icom_port, "INTERRUPT", port_int_reg); + + if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED)) + xmit_interrupt(port_int_reg, icom_port); + + if (port_int_reg & INT_RCV_COMPLETED) + recv_interrupt(port_int_reg, icom_port); + + spin_unlock(&icom_port->uart_port.lock); +} + +static irqreturn_t icom_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + void __iomem * int_reg; + u32 adapter_interrupts; + u16 port_int_reg; + struct icom_adapter *icom_adapter; + struct icom_port *icom_port; + + /* find icom_port for this interrupt */ + icom_adapter = (struct icom_adapter *) dev_id; + + if ((icom_adapter->version | ADAPTER_V2) == ADAPTER_V2) { + int_reg = icom_adapter->base_addr + 0x8024; + + adapter_interrupts = readl(int_reg); + + if (adapter_interrupts & 0x00003FFF) { + /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */ + icom_port = &icom_adapter->port_info[2]; + port_int_reg = (u16) adapter_interrupts; + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + if (adapter_interrupts & 0x3FFF0000) { + /* port 3 interrupt */ + icom_port = &icom_adapter->port_info[3]; + if (icom_port->status == ICOM_PORT_ACTIVE) { + port_int_reg = + (u16) (adapter_interrupts >> 16); + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + } + + /* Clear out any pending interrupts */ + writel(adapter_interrupts, int_reg); + + int_reg = icom_adapter->base_addr + 0x8004; + } else { + int_reg = icom_adapter->base_addr + 0x4004; + } + + adapter_interrupts = readl(int_reg); + + if (adapter_interrupts & 0x00003FFF) { + /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */ + icom_port = &icom_adapter->port_info[0]; + port_int_reg = (u16) adapter_interrupts; + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + if (adapter_interrupts & 0x3FFF0000) { + /* port 1 interrupt */ + icom_port = &icom_adapter->port_info[1]; + if (icom_port->status == ICOM_PORT_ACTIVE) { + port_int_reg = (u16) (adapter_interrupts >> 16); + process_interrupt(port_int_reg, icom_port); + check_modem_status(icom_port); + } + } + + /* Clear out any pending interrupts */ + writel(adapter_interrupts, int_reg); + + /* flush the write */ + adapter_interrupts = readl(int_reg); + + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------ + * Begin serial-core API + * ------------------------------------------------------------------ + */ +static unsigned int icom_tx_empty(struct uart_port *port) +{ + int ret; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) & + SA_FLAGS_READY_TO_XMIT) + ret = TIOCSER_TEMT; + else + ret = 0; + + spin_unlock_irqrestore(&port->lock, flags); + return ret; +} + +static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + unsigned char local_osr; + + trace(ICOM_PORT, "SET_MODEM", 0); + local_osr = readb(&ICOM_PORT->dram->osr); + + if (mctrl & TIOCM_RTS) { + trace(ICOM_PORT, "RAISE_RTS", 0); + local_osr |= ICOM_RTS; + } else { + trace(ICOM_PORT, "LOWER_RTS", 0); + local_osr &= ~ICOM_RTS; + } + + if (mctrl & TIOCM_DTR) { + trace(ICOM_PORT, "RAISE_DTR", 0); + local_osr |= ICOM_DTR; + } else { + trace(ICOM_PORT, "LOWER_DTR", 0); + local_osr &= ~ICOM_DTR; + } + + writeb(local_osr, &ICOM_PORT->dram->osr); +} + +static unsigned int icom_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int result; + + trace(ICOM_PORT, "GET_MODEM", 0); + + status = readb(&ICOM_PORT->dram->isr); + + result = ((status & ICOM_DCD) ? TIOCM_CAR : 0) + | ((status & ICOM_RI) ? TIOCM_RNG : 0) + | ((status & ICOM_DSR) ? TIOCM_DSR : 0) + | ((status & ICOM_CTS) ? TIOCM_CTS : 0); + return result; +} + +static void icom_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + unsigned char cmdReg; + + if (tty_stop) { + trace(ICOM_PORT, "STOP", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg); + } +} + +static void icom_start_tx(struct uart_port *port, unsigned int tty_start) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "START", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT) + writeb(cmdReg & ~CMD_HOLD_XMIT, + &ICOM_PORT->dram->CmdReg); + + icom_write(port); +} + +static void icom_send_xchar(struct uart_port *port, char ch) +{ + unsigned char xdata; + int index; + unsigned long flags; + + trace(ICOM_PORT, "SEND_XCHAR", ch); + + /* wait .1 sec to send char */ + for (index = 0; index < 10; index++) { + spin_lock_irqsave(&port->lock, flags); + xdata = readb(&ICOM_PORT->dram->xchar); + if (xdata == 0x00) { + trace(ICOM_PORT, "QUICK_WRITE", 0); + writeb(ch, &ICOM_PORT->dram->xchar); + + /* flush write operation */ + xdata = readb(&ICOM_PORT->dram->xchar); + spin_unlock_irqrestore(&port->lock, flags); + break; + } + spin_unlock_irqrestore(&port->lock, flags); + msleep(10); + } +} + +static void icom_stop_rx(struct uart_port *port) +{ + unsigned char cmdReg; + + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); +} + +static void icom_enable_ms(struct uart_port *port) +{ + /* no-op */ +} + +static void icom_break(struct uart_port *port, int break_state) +{ + unsigned char cmdReg; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + trace(ICOM_PORT, "BREAK", 0); + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + if (break_state == -1) { + writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); + } else { + writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg); + } + spin_unlock_irqrestore(&port->lock, flags); +} + +static int icom_open(struct uart_port *port) +{ + int retval; + + kobject_get(&ICOM_PORT->adapter->kobj); + retval = startup(ICOM_PORT); + + if (retval) { + kobject_put(&ICOM_PORT->adapter->kobj); + trace(ICOM_PORT, "STARTUP_ERROR", 0); + return retval; + } + + return 0; +} + +static void icom_close(struct uart_port *port) +{ + unsigned char cmdReg; + + trace(ICOM_PORT, "CLOSE", 0); + + /* stop receiver */ + cmdReg = readb(&ICOM_PORT->dram->CmdReg); + writeb(cmdReg & (unsigned char) ~CMD_RCV_ENABLE, + &ICOM_PORT->dram->CmdReg); + + shutdown(ICOM_PORT); + + kobject_put(&ICOM_PORT->adapter->kobj); +} + +static void icom_set_termios(struct uart_port *port, + struct termios *termios, + struct termios *old_termios) +{ + int baud; + unsigned cflag, iflag; + int bits; + char new_config2; + char new_config3 = 0; + char tmp_byte; + int index; + int rcv_buff, xmit_buff; + unsigned long offset; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + trace(ICOM_PORT, "CHANGE_SPEED", 0); + + cflag = termios->c_cflag; + iflag = termios->c_iflag; + + new_config2 = ICOM_ACFG_DRIVE1; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: /* 5 bits/char */ + new_config2 |= ICOM_ACFG_5BPC; + bits = 7; + break; + case CS6: /* 6 bits/char */ + new_config2 |= ICOM_ACFG_6BPC; + bits = 8; + break; + case CS7: /* 7 bits/char */ + new_config2 |= ICOM_ACFG_7BPC; + bits = 9; + break; + case CS8: /* 8 bits/char */ + new_config2 |= ICOM_ACFG_8BPC; + bits = 10; + break; + default: + bits = 10; + break; + } + if (cflag & CSTOPB) { + /* 2 stop bits */ + new_config2 |= ICOM_ACFG_2STOP_BIT; + bits++; + } + if (cflag & PARENB) { + /* parity bit enabled */ + new_config2 |= ICOM_ACFG_PARITY_ENAB; + trace(ICOM_PORT, "PARENB", 0); + bits++; + } + if (cflag & PARODD) { + /* odd parity */ + new_config2 |= ICOM_ACFG_PARITY_ODD; + trace(ICOM_PORT, "PARODD", 0); + } + + /* Determine divisor based on baud rate */ + baud = uart_get_baud_rate(port, termios, old_termios, + icom_acfg_baud[0], + icom_acfg_baud[BAUD_TABLE_LIMIT]); + if (!baud) + baud = 9600; /* B0 transition handled in rs_set_termios */ + + for (index = 0; index < BAUD_TABLE_LIMIT; index++) { + if (icom_acfg_baud[index] == baud) { + new_config3 = index; + break; + } + } + + uart_update_timeout(port, cflag, baud); + + /* CTS flow control flag and modem status interrupts */ + tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); + if (cflag & CRTSCTS) + tmp_byte |= HDLC_HDW_FLOW; + else + tmp_byte &= ~HDLC_HDW_FLOW; + writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); + + /* + * Set up parity check flag + */ + ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE; + if (iflag & INPCK) + ICOM_PORT->read_status_mask |= + SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR; + + if ((iflag & BRKINT) || (iflag & PARMRK)) + ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET; + + /* + * Characters to ignore + */ + ICOM_PORT->ignore_status_mask = 0; + if (iflag & IGNPAR) + ICOM_PORT->ignore_status_mask |= + SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR; + if (iflag & IGNBRK) { + ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (iflag & IGNPAR) + ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN; + } + + /* + * !!! ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE; + + /* Turn off Receiver to prepare for reset */ + writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg); + + for (index = 0; index < 10; index++) { + if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) { + break; + } + } + + /* clear all current buffers of data */ + for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) { + ICOM_PORT->statStg->rcv[rcv_buff].flags = 0; + ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0; + ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength = + (unsigned short int) cpu_to_le16(RCV_BUFF_SZ); + } + + for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) { + ICOM_PORT->statStg->xmit[xmit_buff].flags = 0; + } + + /* activate changes and start xmit and receiver here */ + /* Enable the receiver */ + writeb(new_config3, &(ICOM_PORT->dram->async_config3)); + writeb(new_config2, &(ICOM_PORT->dram->async_config2)); + tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg)); + tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL; + writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg)); + writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */ + writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */ + + /* reset processor */ + writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg); + + for (index = 0; index < 10; index++) { + if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) { + break; + } + } + + /* Enable Transmitter and Reciever */ + offset = + (unsigned long) &ICOM_PORT->statStg->rcv[0] - + (unsigned long) ICOM_PORT->statStg; + writel(ICOM_PORT->statStg_pci + offset, + &ICOM_PORT->dram->RcvStatusAddr); + ICOM_PORT->next_rcv = 0; + ICOM_PORT->put_length = 0; + *ICOM_PORT->xmitRestart = 0; + writel(ICOM_PORT->xmitRestart_pci, + &ICOM_PORT->dram->XmitStatusAddr); + trace(ICOM_PORT, "XR_ENAB", 0); + writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *icom_type(struct uart_port *port) +{ + return "icom"; +} + +static void icom_release_port(struct uart_port *port) +{ +} + +static int icom_request_port(struct uart_port *port) +{ + return 0; +} + +static void icom_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_ICOM; +} + +static struct uart_ops icom_ops = { + .tx_empty = icom_tx_empty, + .set_mctrl = icom_set_mctrl, + .get_mctrl = icom_get_mctrl, + .stop_tx = icom_stop_tx, + .start_tx = icom_start_tx, + .send_xchar = icom_send_xchar, + .stop_rx = icom_stop_rx, + .enable_ms = icom_enable_ms, + .break_ctl = icom_break, + .startup = icom_open, + .shutdown = icom_close, + .set_termios = icom_set_termios, + .type = icom_type, + .release_port = icom_release_port, + .request_port = icom_request_port, + .config_port = icom_config_port, +}; + +#define ICOM_CONSOLE NULL + +static struct uart_driver icom_uart_driver = { + .owner = THIS_MODULE, + .driver_name = ICOM_DRIVER_NAME, + .dev_name = "ttyA", + .major = ICOM_MAJOR, + .minor = ICOM_MINOR_START, + .nr = NR_PORTS, + .cons = ICOM_CONSOLE, +}; + +static int __devinit icom_init_ports(struct icom_adapter *icom_adapter) +{ + u32 subsystem_id = icom_adapter->subsystem_id; + int retval = 0; + int i; + struct icom_port *icom_port; + + if (icom_adapter->version == ADAPTER_V1) { + icom_adapter->numb_ports = 2; + + for (i = 0; i < 2; i++) { + icom_port = &icom_adapter->port_info[i]; + icom_port->port = i; + icom_port->status = ICOM_PORT_ACTIVE; + icom_port->imbed_modem = ICOM_UNKNOWN; + } + } else { + if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) { + icom_adapter->numb_ports = 4; + + for (i = 0; i < 4; i++) { + icom_port = &icom_adapter->port_info[i]; + + icom_port->port = i; + icom_port->status = ICOM_PORT_ACTIVE; + icom_port->imbed_modem = ICOM_IMBED_MODEM; + } + } else { + icom_adapter->numb_ports = 4; + + icom_adapter->port_info[0].port = 0; + icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE; + + if (subsystem_id == + PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) { + icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM; + } else { + icom_adapter->port_info[0].imbed_modem = ICOM_RVX; + } + + icom_adapter->port_info[1].status = ICOM_PORT_OFF; + + icom_adapter->port_info[2].port = 2; + icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE; + icom_adapter->port_info[2].imbed_modem = ICOM_RVX; + icom_adapter->port_info[3].status = ICOM_PORT_OFF; + } + } + + return retval; +} + +static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num) +{ + if (icom_adapter->version == ADAPTER_V1) { + icom_port->global_reg = icom_adapter->base_addr + 0x4000; + icom_port->int_reg = icom_adapter->base_addr + + 0x4004 + 2 - 2 * port_num; + } else { + icom_port->global_reg = icom_adapter->base_addr + 0x8000; + if (icom_port->port < 2) + icom_port->int_reg = icom_adapter->base_addr + + 0x8004 + 2 - 2 * icom_port->port; + else + icom_port->int_reg = icom_adapter->base_addr + + 0x8024 + 2 - 2 * (icom_port->port - 2); + } +} +static int __init icom_load_ports(struct icom_adapter *icom_adapter) +{ + struct icom_port *icom_port; + int port_num; + int retval; + + for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) { + + icom_port = &icom_adapter->port_info[port_num]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + icom_port_active(icom_port, icom_adapter, port_num); + icom_port->dram = icom_adapter->base_addr + + 0x2000 * icom_port->port; + + icom_port->adapter = icom_adapter; + + /* get port memory */ + if ((retval = get_port_memory(icom_port)) != 0) { + dev_err(&icom_port->adapter->pci_dev->dev, + "Memory allocation for port FAILED\n"); + } + } + } + return 0; +} + +static int __devinit icom_alloc_adapter(struct icom_adapter + **icom_adapter_ref) +{ + int adapter_count = 0; + struct icom_adapter *icom_adapter; + struct icom_adapter *cur_adapter_entry; + struct list_head *tmp; + + icom_adapter = (struct icom_adapter *) + kmalloc(sizeof(struct icom_adapter), GFP_KERNEL); + + if (!icom_adapter) { + return -ENOMEM; + } + + memset(icom_adapter, 0, sizeof(struct icom_adapter)); + + list_for_each(tmp, &icom_adapter_head) { + cur_adapter_entry = + list_entry(tmp, struct icom_adapter, + icom_adapter_entry); + if (cur_adapter_entry->index != adapter_count) { + break; + } + adapter_count++; + } + + icom_adapter->index = adapter_count; + list_add_tail(&icom_adapter->icom_adapter_entry, tmp); + + *icom_adapter_ref = icom_adapter; + return 0; +} + +static void icom_free_adapter(struct icom_adapter *icom_adapter) +{ + list_del(&icom_adapter->icom_adapter_entry); + kfree(icom_adapter); +} + +static void icom_remove_adapter(struct icom_adapter *icom_adapter) +{ + struct icom_port *icom_port; + int index; + + for (index = 0; index < icom_adapter->numb_ports; index++) { + icom_port = &icom_adapter->port_info[index]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + dev_info(&icom_adapter->pci_dev->dev, + "Device removed\n"); + + uart_remove_one_port(&icom_uart_driver, + &icom_port->uart_port); + + /* be sure that DTR and RTS are dropped */ + writeb(0x00, &icom_port->dram->osr); + + /* Wait 0.1 Sec for simple Init to complete */ + msleep(100); + + /* Stop proccessor */ + stop_processor(icom_port); + + free_port_memory(icom_port); + } + } + + free_irq(icom_adapter->irq_number, (void *) icom_adapter); + iounmap(icom_adapter->base_addr); + icom_free_adapter(icom_adapter); + pci_release_regions(icom_adapter->pci_dev); +} + +static void icom_kobj_release(struct kobject *kobj) +{ + struct icom_adapter *icom_adapter; + + icom_adapter = to_icom_adapter(kobj); + icom_remove_adapter(icom_adapter); +} + +static struct kobj_type icom_kobj_type = { + .release = icom_kobj_release, +}; + +static int __devinit icom_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + int index; + unsigned int command_reg; + int retval; + struct icom_adapter *icom_adapter; + struct icom_port *icom_port; + + retval = pci_enable_device(dev); + if (retval) { + dev_err(&dev->dev, "Device enable FAILED\n"); + return retval; + } + + if ( (retval = pci_request_regions(dev, "icom"))) { + dev_err(&dev->dev, "pci_request_region FAILED\n"); + pci_disable_device(dev); + return retval; + } + + pci_set_master(dev); + + if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { + dev_err(&dev->dev, "PCI Config read FAILED\n"); + return retval; + } + + pci_write_config_dword(dev, PCI_COMMAND, + command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); + + if (ent->driver_data == ADAPTER_V1) { + pci_write_config_dword(dev, 0x44, 0x8300830A); + } else { + pci_write_config_dword(dev, 0x44, 0x42004200); + pci_write_config_dword(dev, 0x48, 0x42004200); + } + + + retval = icom_alloc_adapter(&icom_adapter); + if (retval) { + dev_err(&dev->dev, "icom_alloc_adapter FAILED\n"); + retval = -EIO; + goto probe_exit0; + } + + icom_adapter->base_addr_pci = pci_resource_start(dev, 0); + icom_adapter->irq_number = dev->irq; + icom_adapter->pci_dev = dev; + icom_adapter->version = ent->driver_data; + icom_adapter->subsystem_id = ent->subdevice; + + + retval = icom_init_ports(icom_adapter); + if (retval) { + dev_err(&dev->dev, "Port configuration failed\n"); + goto probe_exit1; + } + + icom_adapter->base_addr = ioremap(icom_adapter->base_addr_pci, + pci_resource_len(dev, 0)); + + if (!icom_adapter->base_addr) + goto probe_exit1; + + /* save off irq and request irq line */ + if ( (retval = request_irq(dev->irq, icom_interrupt, + SA_INTERRUPT | SA_SHIRQ, ICOM_DRIVER_NAME, + (void *) icom_adapter))) { + goto probe_exit2; + } + + retval = icom_load_ports(icom_adapter); + + for (index = 0; index < icom_adapter->numb_ports; index++) { + icom_port = &icom_adapter->port_info[index]; + + if (icom_port->status == ICOM_PORT_ACTIVE) { + icom_port->uart_port.irq = icom_port->adapter->irq_number; + icom_port->uart_port.type = PORT_ICOM; + icom_port->uart_port.iotype = UPIO_MEM; + icom_port->uart_port.membase = + (char *) icom_adapter->base_addr_pci; + icom_port->uart_port.fifosize = 16; + icom_port->uart_port.ops = &icom_ops; + icom_port->uart_port.line = + icom_port->port + icom_adapter->index * 4; + if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) { + icom_port->status = ICOM_PORT_OFF; + dev_err(&dev->dev, "Device add failed\n"); + } else + dev_info(&dev->dev, "Device added\n"); + } + } + + kobject_init(&icom_adapter->kobj); + icom_adapter->kobj.ktype = &icom_kobj_type; + return 0; + +probe_exit2: + iounmap(icom_adapter->base_addr); +probe_exit1: + icom_free_adapter(icom_adapter); + +probe_exit0: + pci_release_regions(dev); + pci_disable_device(dev); + + return retval; + + +} + +static void __devexit icom_remove(struct pci_dev *dev) +{ + struct icom_adapter *icom_adapter; + struct list_head *tmp; + + list_for_each(tmp, &icom_adapter_head) { + icom_adapter = list_entry(tmp, struct icom_adapter, + icom_adapter_entry); + if (icom_adapter->pci_dev == dev) { + kobject_put(&icom_adapter->kobj); + return; + } + } + + dev_err(&dev->dev, "Unable to find device to remove\n"); +} + +static struct pci_driver icom_pci_driver = { + .name = ICOM_DRIVER_NAME, + .id_table = icom_pci_table, + .probe = icom_probe, + .remove = __devexit_p(icom_remove), +}; + +static int __init icom_init(void) +{ + int ret; + + spin_lock_init(&icom_lock); + + ret = uart_register_driver(&icom_uart_driver); + if (ret) + return ret; + + ret = pci_register_driver(&icom_pci_driver); + + if (ret < 0) + uart_unregister_driver(&icom_uart_driver); + + return ret; +} + +static void __exit icom_exit(void) +{ + pci_unregister_driver(&icom_pci_driver); + uart_unregister_driver(&icom_uart_driver); +} + +module_init(icom_init); +module_exit(icom_exit); + +#ifdef ICOM_TRACE +static inline void trace(struct icom_port *icom_port, char *trace_pt, + unsigned long trace_data) +{ + dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n", + icom_port->port, trace_pt, trace_data); +} +#endif + +MODULE_AUTHOR("Michael Anderson "); +MODULE_DESCRIPTION("IBM iSeries Serial IOA driver"); +MODULE_SUPPORTED_DEVICE + ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/serial/icom.h b/drivers/serial/icom.h new file mode 100644 index 000000000000..23dc0f7ddf8b --- /dev/null +++ b/drivers/serial/icom.h @@ -0,0 +1,290 @@ +/* + * icom.h + * + * Copyright (C) 2001 Michael Anderson, IBM Corporation + * + * Serial device driver include file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1) +static int icom_acfg_baud[] = { + 300, + 600, + 900, + 1200, + 1800, + 2400, + 3600, + 4800, + 7200, + 9600, + 14400, + 19200, + 28800, + 38400, + 57600, + 76800, + 115200, + 153600, + 230400, + 307200, + 460800, +}; + +struct icom_regs { + u32 control; /* Adapter Control Register */ + u32 interrupt; /* Adapter Interrupt Register */ + u32 int_mask; /* Adapter Interrupt Mask Reg */ + u32 int_pri; /* Adapter Interrupt Priority r */ + u32 int_reg_b; /* Adapter non-masked Interrupt */ + u32 resvd01; + u32 resvd02; + u32 resvd03; + u32 control_2; /* Adapter Control Register 2 */ + u32 interrupt_2; /* Adapter Interrupt Register 2 */ + u32 int_mask_2; /* Adapter Interrupt Mask 2 */ + u32 int_pri_2; /* Adapter Interrupt Prior 2 */ + u32 int_reg_2b; /* Adapter non-masked 2 */ +}; + +struct func_dram { + u32 reserved[108]; /* 0-1B0 reserved by personality code */ + u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */ + u8 RcvStnAddr; /* 1B4 Receive Station Addr */ + u8 IdleState; /* 1B5 Idle State */ + u8 IdleMonitor; /* 1B6 Idle Monitor */ + u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */ + u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */ + u8 StartXmitCmd; /* 1BC Start Xmit Command */ + u8 HDLCConfigReg; /* 1BD Reserved */ + u8 CauseCode; /* 1BE Cause code for fatal error */ + u8 xchar; /* 1BF High priority send */ + u32 reserved3; /* 1C0-1C3 Reserved */ + u8 PrevCmdReg; /* 1C4 Reserved */ + u8 CmdReg; /* 1C5 Command Register */ + u8 async_config2; /* 1C6 Async Config Byte 2 */ + u8 async_config3; /* 1C7 Async Config Byte 3 */ + u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */ + u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */ + u8 misc_flags; /* 1DD misc flags */ +#define V2_HARDWARE 0x40 +#define ICOM_HDW_ACTIVE 0x01 + u8 call_length; /* 1DE Phone #/CFI buff ln */ + u8 call_length2; /* 1DF Upper byte (unused) */ + u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */ + u16 timer_value; /* 1E4-1E5 general timer value */ + u8 timer_command; /* 1E6 general timer cmd */ + u8 dce_command; /* 1E7 dce command reg */ + u8 dce_cmd_status; /* 1E8 dce command stat */ + u8 x21_r1_ioff; /* 1E9 dce ready counter */ + u8 x21_r0_ioff; /* 1EA dce not ready ctr */ + u8 x21_ralt_ioff; /* 1EB dce CNR counter */ + u8 x21_r1_ion; /* 1EC dce ready I on ctr */ + u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */ + u8 ier; /* 1EE Interrupt Enable */ + u8 isr; /* 1EF Input Signal Reg */ + u8 osr; /* 1F0 Output Signal Reg */ + u8 reset; /* 1F1 Reset/Reload Reg */ + u8 disable; /* 1F2 Disable Reg */ + u8 sync; /* 1F3 Sync Reg */ + u8 error_stat; /* 1F4 Error Status */ + u8 cable_id; /* 1F5 Cable ID */ + u8 cs_length; /* 1F6 CS Load Length */ + u8 mac_length; /* 1F7 Mac Load Length */ + u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */ + u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */ +}; + +/* + * adapter defines and structures + */ +#define ICOM_CONTROL_START_A 0x00000008 +#define ICOM_CONTROL_STOP_A 0x00000004 +#define ICOM_CONTROL_START_B 0x00000002 +#define ICOM_CONTROL_STOP_B 0x00000001 +#define ICOM_CONTROL_START_C 0x00000008 +#define ICOM_CONTROL_STOP_C 0x00000004 +#define ICOM_CONTROL_START_D 0x00000002 +#define ICOM_CONTROL_STOP_D 0x00000001 +#define ICOM_IRAM_OFFSET 0x1000 +#define ICOM_IRAM_SIZE 0x0C00 +#define ICOM_DCE_IRAM_OFFSET 0x0A00 +#define ICOM_CABLE_ID_VALID 0x01 +#define ICOM_CABLE_ID_MASK 0xF0 +#define ICOM_DISABLE 0x80 +#define CMD_XMIT_RCV_ENABLE 0xC0 +#define CMD_XMIT_ENABLE 0x40 +#define CMD_RCV_DISABLE 0x00 +#define CMD_RCV_ENABLE 0x80 +#define CMD_RESTART 0x01 +#define CMD_HOLD_XMIT 0x02 +#define CMD_SND_BREAK 0x04 +#define RS232_CABLE 0x06 +#define V24_CABLE 0x0E +#define V35_CABLE 0x0C +#define V36_CABLE 0x02 +#define NO_CABLE 0x00 +#define START_DOWNLOAD 0x80 +#define ICOM_INT_MASK_PRC_A 0x00003FFF +#define ICOM_INT_MASK_PRC_B 0x3FFF0000 +#define ICOM_INT_MASK_PRC_C 0x00003FFF +#define ICOM_INT_MASK_PRC_D 0x3FFF0000 +#define INT_RCV_COMPLETED 0x1000 +#define INT_XMIT_COMPLETED 0x2000 +#define INT_IDLE_DETECT 0x0800 +#define INT_RCV_DISABLED 0x0400 +#define INT_XMIT_DISABLED 0x0200 +#define INT_RCV_XMIT_SHUTDOWN 0x0100 +#define INT_FATAL_ERROR 0x0080 +#define INT_CABLE_PULL 0x0020 +#define INT_SIGNAL_CHANGE 0x0010 +#define HDLC_PPP_PURE_ASYNC 0x02 +#define HDLC_FF_FILL 0x00 +#define HDLC_HDW_FLOW 0x01 +#define START_XMIT 0x80 +#define ICOM_ACFG_DRIVE1 0x20 +#define ICOM_ACFG_NO_PARITY 0x00 +#define ICOM_ACFG_PARITY_ENAB 0x02 +#define ICOM_ACFG_PARITY_ODD 0x01 +#define ICOM_ACFG_8BPC 0x00 +#define ICOM_ACFG_7BPC 0x04 +#define ICOM_ACFG_6BPC 0x08 +#define ICOM_ACFG_5BPC 0x0C +#define ICOM_ACFG_1STOP_BIT 0x00 +#define ICOM_ACFG_2STOP_BIT 0x10 +#define ICOM_DTR 0x80 +#define ICOM_RTS 0x40 +#define ICOM_RI 0x08 +#define ICOM_DSR 0x80 +#define ICOM_DCD 0x20 +#define ICOM_CTS 0x40 + +#define NUM_XBUFFS 1 +#define NUM_RBUFFS 2 +#define RCV_BUFF_SZ 0x0200 +#define XMIT_BUFF_SZ 0x1000 +struct statusArea { + /**********************************************/ + /* Transmit Status Area */ + /**********************************************/ + struct xmit_status_area{ + u32 leNext; /* Next entry in Little Endian on Adapter */ + u32 leNextASD; + u32 leBuffer; /* Buffer for entry in LE for Adapter */ + u16 leLengthASD; + u16 leOffsetASD; + u16 leLength; /* Length of data in segment */ + u16 flags; +#define SA_FLAGS_DONE 0x0080 /* Done with Segment */ +#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */ +#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */ +#define SA_FLAGS_READY_TO_XMIT 0x0800 +#define SA_FLAGS_STAT_MASK 0x007F + } xmit[NUM_XBUFFS]; + + /**********************************************/ + /* Receive Status Area */ + /**********************************************/ + struct { + u32 leNext; /* Next entry in Little Endian on Adapter */ + u32 leNextASD; + u32 leBuffer; /* Buffer for entry in LE for Adapter */ + u16 WorkingLength; /* size of segment */ + u16 reserv01; + u16 leLength; /* Length of data in segment */ + u16 flags; +#define SA_FL_RCV_DONE 0x0010 /* Data ready */ +#define SA_FLAGS_OVERRUN 0x0040 +#define SA_FLAGS_PARITY_ERROR 0x0080 +#define SA_FLAGS_FRAME_ERROR 0x0001 +#define SA_FLAGS_FRAME_TRUNC 0x0002 +#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */ +#define SA_FLAGS_RCV_MASK 0xFFE6 + } rcv[NUM_RBUFFS]; +}; + +struct icom_adapter; + + +#define ICOM_MAJOR 243 +#define ICOM_MINOR_START 0 + +struct icom_port { + struct uart_port uart_port; + u8 imbed_modem; +#define ICOM_UNKNOWN 1 +#define ICOM_RVX 2 +#define ICOM_IMBED_MODEM 3 + unsigned char cable_id; + unsigned char read_status_mask; + unsigned char ignore_status_mask; + void __iomem * int_reg; + struct icom_regs __iomem *global_reg; + struct func_dram __iomem *dram; + int port; + struct statusArea *statStg; + dma_addr_t statStg_pci; + u32 *xmitRestart; + dma_addr_t xmitRestart_pci; + unsigned char *xmit_buf; + dma_addr_t xmit_buf_pci; + unsigned char *recv_buf; + dma_addr_t recv_buf_pci; + int next_rcv; + int put_length; + int status; +#define ICOM_PORT_ACTIVE 1 /* Port exists. */ +#define ICOM_PORT_OFF 0 /* Port does not exist. */ + int load_in_progress; + struct icom_adapter *adapter; +}; + +struct icom_adapter { + void __iomem * base_addr; + unsigned long base_addr_pci; + unsigned char irq_number; + struct pci_dev *pci_dev; + struct icom_port port_info[4]; + int index; + int version; +#define ADAPTER_V1 0x0001 +#define ADAPTER_V2 0x0002 + u32 subsystem_id; +#define FOUR_PORT_MODEL 0x0252 +#define V2_TWO_PORTS_RVX 0x021A +#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251 + int numb_ports; + struct list_head icom_adapter_entry; + struct kobject kobj; +}; + +/* prototype */ +extern void iCom_sercons_init(void); + +struct lookup_proc_table { + u32 __iomem *global_control_reg; + unsigned long processor_id; +}; + +struct lookup_int_table { + u32 __iomem *global_int_mask; + unsigned long processor_id; +}; + +#define MSECS_TO_JIFFIES(ms) (((ms)*HZ+999)/1000) diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c new file mode 100644 index 000000000000..d273134f9e6c --- /dev/null +++ b/drivers/serial/imx.c @@ -0,0 +1,909 @@ +/* + * linux/drivers/serial/imx.c + * + * Driver for Motorola IMX serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Author: Sascha Hauer + * Copyright (C) 2004 Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * [29-Mar-2005] Mike Lee + * Added hardware handshake + */ +#include + +#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_IMX_MAJOR 204 +#define MINOR_START 41 + +#define NR_PORTS 2 + +#define IMX_ISR_PASS_LIMIT 256 + +/* + * This is the size of our serial port register set. + */ +#define UART_PORT_SIZE 0x100 + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +#define DRIVER_NAME "IMX-uart" + +struct imx_port { + struct uart_port port; + struct timer_list timer; + unsigned int old_status; + int txirq,rxirq; +}; + +/* + * Handle any change of modem status signal since we were last called. + */ +static void imx_mctrl_check(struct imx_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.info->delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void imx_timeout(unsigned long data) +{ + struct imx_port *sport = (struct imx_port *)data; + unsigned long flags; + + if (sport->port.info) { + spin_lock_irqsave(&sport->port.lock, flags); + imx_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void imx_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct imx_port *sport = (struct imx_port *)port; + UCR1((u32)sport->port.membase) &= ~UCR1_TXMPTYEN; +} + +/* + * interrupts disabled on entry + */ +static void imx_stop_rx(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + UCR2((u32)sport->port.membase) &= ~UCR2_RXEN; +} + +/* + * Set the modem control timer to fire immediately. + */ +static void imx_enable_ms(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + mod_timer(&sport->timer, jiffies); +} + +static inline void imx_transmit_buffer(struct imx_port *sport) +{ + struct circ_buf *xmit = &sport->port.info->xmit; + + do { + /* send xmit->buf[xmit->tail] + * out the port here */ + URTX0((u32)sport->port.membase) = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (!(UTS((u32)sport->port.membase) & UTS_TXFULL)); + + if (uart_circ_empty(xmit)) + imx_stop_tx(&sport->port, 0); +} + +/* + * interrupts disabled on entry + */ +static void imx_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct imx_port *sport = (struct imx_port *)port; + + UCR1((u32)sport->port.membase) |= UCR1_TXMPTYEN; + + if(UTS((u32)sport->port.membase) & UTS_TXEMPTY) + imx_transmit_buffer(sport); +} + +static irqreturn_t imx_txint(int irq, void *dev_id, struct pt_regs *regs) +{ + struct imx_port *sport = (struct imx_port *)dev_id; + struct circ_buf *xmit = &sport->port.info->xmit; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock,flags); + if (sport->port.x_char) + { + /* Send next char */ + URTX0((u32)sport->port.membase) = sport->port.x_char; + goto out; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + imx_stop_tx(&sport->port, 0); + goto out; + } + + imx_transmit_buffer(sport); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + +out: + spin_unlock_irqrestore(&sport->port.lock,flags); + return IRQ_HANDLED; +} + +static irqreturn_t imx_rxint(int irq, void *dev_id, struct pt_regs *regs) +{ + struct imx_port *sport = dev_id; + unsigned int rx,flg,ignored = 0; + struct tty_struct *tty = sport->port.info->tty; + unsigned long flags; + + rx = URXD0((u32)sport->port.membase); + spin_lock_irqsave(&sport->port.lock,flags); + + do { + flg = TTY_NORMAL; + sport->port.icount.rx++; + + if( USR2((u32)sport->port.membase) & USR2_BRCD ) { + USR2((u32)sport->port.membase) |= USR2_BRCD; + if(uart_handle_break(&sport->port)) + goto ignore_char; + } + + if (uart_handle_sysrq_char + (&sport->port, (unsigned char)rx, regs)) + goto ignore_char; + + if( rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) ) + goto handle_error; + + error_return: + tty_insert_flip_char(tty, rx, flg); + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + goto out; + + ignore_char: + rx = URXD0((u32)sport->port.membase); + } while(rx & URXD_CHARRDY); + +out: + spin_unlock_irqrestore(&sport->port.lock,flags); + tty_flip_buffer_push(tty); + return IRQ_HANDLED; + +handle_error: + if (rx & URXD_PRERR) + sport->port.icount.parity++; + else if (rx & URXD_FRMERR) + sport->port.icount.frame++; + if (rx & URXD_OVRRUN) + sport->port.icount.overrun++; + + if (rx & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + goto ignore_char; + } + + rx &= sport->port.read_status_mask; + + if (rx & URXD_PRERR) + flg = TTY_PARITY; + else if (rx & URXD_FRMERR) + flg = TTY_FRAME; + if (rx & URXD_OVRRUN) + flg = TTY_OVERRUN; + +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + goto error_return; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int imx_tx_empty(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + return USR2((u32)sport->port.membase) & USR2_TXDC ? TIOCSER_TEMT : 0; +} + +static unsigned int imx_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/* + * Interrupts always disabled. + */ +static void imx_break_ctl(struct uart_port *port, int break_state) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); + + if ( break_state != 0 ) + UCR1((u32)sport->port.membase) |= UCR1_SNDBRK; + else + UCR1((u32)sport->port.membase) &= ~UCR1_SNDBRK; + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +#define TXTL 2 /* reset default */ +#define RXTL 1 /* reset default */ + +static int imx_startup(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + int retval; + unsigned int val; + unsigned long flags; + + /* set receiver / transmitter trigger level. We assume + * that RFDIV has been set by the arch setup or by the bootloader. + */ + val = (UFCR((u32)sport->port.membase) & UFCR_RFDIV) | TXTL<<10 | RXTL; + UFCR((u32)sport->port.membase) = val; + + /* disable the DREN bit (Data Ready interrupt enable) before + * requesting IRQs + */ + UCR4((u32)sport->port.membase) &= ~UCR4_DREN; + + /* + * Allocate the IRQ + */ + retval = request_irq(sport->rxirq, imx_rxint, 0, + DRIVER_NAME, sport); + if (retval) goto error_out2; + + retval = request_irq(sport->txirq, imx_txint, 0, + "imx-uart", sport); + if (retval) goto error_out1; + + /* + * Finally, clear and enable interrupts + */ + + UCR1((u32)sport->port.membase) |= + (UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_UARTEN); + + UCR2((u32)sport->port.membase) |= (UCR2_RXEN | UCR2_TXEN); + /* + * Enable modem status interrupts + */ + spin_lock_irqsave(&sport->port.lock,flags); + imx_enable_ms(&sport->port); + spin_unlock_irqrestore(&sport->port.lock,flags); + + return 0; + +error_out1: + free_irq(sport->rxirq, sport); +error_out2: + free_irq(sport->txirq, sport); + return retval; +} + +static void imx_shutdown(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Free the interrupts + */ + free_irq(sport->txirq, sport); + free_irq(sport->rxirq, sport); + + /* + * Disable all interrupts, port and break condition. + */ + + UCR1((u32)sport->port.membase) &= + ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_UARTEN); +} + +static void +imx_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct imx_port *sport = (struct imx_port *)port; + unsigned long flags; + unsigned int ucr2, old_ucr1, old_txrxen, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + /* + * If we don't support modem control lines, don't allow + * these to be set. + */ + if (0) { + termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR); + termios->c_cflag |= CLOCAL; + } + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS; + else + ucr2 = UCR2_SRST | UCR2_IRTS; + + if (termios->c_cflag & CRTSCTS) { + ucr2 &= ~UCR2_IRTS; + ucr2 |= UCR2_CTSC; + } + + if (termios->c_cflag & CSTOPB) + ucr2 |= UCR2_STPB; + if (termios->c_cflag & PARENB) { + ucr2 |= UCR2_PREN; + if (!(termios->c_cflag & PARODD)) + ucr2 |= UCR2_PROE; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask = 0; + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= URXD_BRK; + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= URXD_PRERR; + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= URXD_BRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= URXD_OVRRUN; + } + + del_timer_sync(&sport->timer); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_ucr1 = UCR1((u32)sport->port.membase); + UCR1((u32)sport->port.membase) &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN); + + while ( !(USR2((u32)sport->port.membase) & USR2_TXDC)) + barrier(); + + /* then, disable everything */ + old_txrxen = UCR2((u32)sport->port.membase) & ( UCR2_TXEN | UCR2_RXEN ); + UCR2((u32)sport->port.membase) &= ~( UCR2_TXEN | UCR2_RXEN); + + /* set the parity, stop bits and data size */ + UCR2((u32)sport->port.membase) = ucr2; + + /* set the baud rate. We assume uartclk = 16 MHz + * + * baud * 16 UBIR - 1 + * --------- = -------- + * uartclk UBMR - 1 + */ + UBIR((u32)sport->port.membase) = (baud / 100) - 1; + UBMR((u32)sport->port.membase) = 10000 - 1; + + UCR1((u32)sport->port.membase) = old_ucr1; + UCR2((u32)sport->port.membase) |= old_txrxen; + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + imx_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *imx_type(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + return sport->port.type == PORT_IMX ? "IMX" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void imx_release_port(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + release_mem_region(sport->port.mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int imx_request_port(struct uart_port *port) +{ + struct imx_port *sport = (struct imx_port *)port; + + return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, + "imx-uart") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void imx_config_port(struct uart_port *port, int flags) +{ + struct imx_port *sport = (struct imx_port *)port; + + if (flags & UART_CONFIG_TYPE && + imx_request_port(&sport->port) == 0) + sport->port.type = PORT_IMX; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_IMX and PORT_UNKNOWN + */ +static int +imx_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct imx_port *sport = (struct imx_port *)port; + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != UPIO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops imx_pops = { + .tx_empty = imx_tx_empty, + .set_mctrl = imx_set_mctrl, + .get_mctrl = imx_get_mctrl, + .stop_tx = imx_stop_tx, + .start_tx = imx_start_tx, + .stop_rx = imx_stop_rx, + .enable_ms = imx_enable_ms, + .break_ctl = imx_break_ctl, + .startup = imx_startup, + .shutdown = imx_shutdown, + .set_termios = imx_set_termios, + .type = imx_type, + .release_port = imx_release_port, + .request_port = imx_request_port, + .config_port = imx_config_port, + .verify_port = imx_verify_port, +}; + +static struct imx_port imx_ports[] = { + { + .txirq = UART1_MINT_TX, + .rxirq = UART1_MINT_RX, + .port = { + .type = PORT_IMX, + .iotype = SERIAL_IO_MEM, + .membase = (void *)IMX_UART1_BASE, + .mapbase = IMX_UART1_BASE, /* FIXME */ + .irq = UART1_MINT_RX, + .uartclk = 16000000, + .fifosize = 8, + .flags = ASYNC_BOOT_AUTOCONF, + .ops = &imx_pops, + .line = 0, + }, + }, { + .txirq = UART2_MINT_TX, + .rxirq = UART2_MINT_RX, + .port = { + .type = PORT_IMX, + .iotype = SERIAL_IO_MEM, + .membase = (void *)IMX_UART2_BASE, + .mapbase = IMX_UART2_BASE, /* FIXME */ + .irq = UART2_MINT_RX, + .uartclk = 16000000, + .fifosize = 8, + .flags = ASYNC_BOOT_AUTOCONF, + .ops = &imx_pops, + .line = 1, + }, + } +}; + +/* + * Setup the IMX serial ports. + * Note also that we support "console=ttySMXx" where "x" is either 0 or 1. + * Which serial port this ends up being depends on the machine you're + * running this kernel on. I'm not convinced that this is a good idea, + * but that's the way it traditionally works. + * + */ +static void __init imx_init_ports(void) +{ + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < ARRAY_SIZE(imx_ports); i++) { + init_timer(&imx_ports[i].timer); + imx_ports[i].timer.function = imx_timeout; + imx_ports[i].timer.data = (unsigned long)&imx_ports[i]; + } + + imx_gpio_mode(PC9_PF_UART1_CTS); + imx_gpio_mode(PC10_PF_UART1_RTS); + imx_gpio_mode(PC11_PF_UART1_TXD); + imx_gpio_mode(PC12_PF_UART1_RXD); + imx_gpio_mode(PB28_PF_UART2_CTS); + imx_gpio_mode(PB29_PF_UART2_RTS); + + imx_gpio_mode(PB30_PF_UART2_TXD); + imx_gpio_mode(PB31_PF_UART2_RXD); + +#if 0 /* We don't need these, on the mx1 the _modem_ side of the uart + * is implemented. + */ + imx_gpio_mode(PD7_AF_UART2_DTR); + imx_gpio_mode(PD8_AF_UART2_DCD); + imx_gpio_mode(PD9_AF_UART2_RI); + imx_gpio_mode(PD10_AF_UART2_DSR); +#endif + + +} + +#ifdef CONFIG_SERIAL_IMX_CONSOLE + +/* + * Interrupts are disabled on entering + */ +static void +imx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct imx_port *sport = &imx_ports[co->index]; + unsigned int old_ucr1, old_ucr2, i; + + /* + * First, save UCR1/2 and then disable interrupts + */ + old_ucr1 = UCR1((u32)sport->port.membase); + old_ucr2 = UCR2((u32)sport->port.membase); + + UCR1((u32)sport->port.membase) = + (old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN) + & ~(UCR1_TXMPTYEN | UCR1_RRDYEN); + UCR2((u32)sport->port.membase) = old_ucr2 | UCR2_TXEN; + + /* + * Now, do each character + */ + for (i = 0; i < count; i++) { + + while ((UTS((u32)sport->port.membase) & UTS_TXFULL)) + barrier(); + + URTX0((u32)sport->port.membase) = s[i]; + + if (s[i] == '\n') { + while ((UTS((u32)sport->port.membase) & UTS_TXFULL)) + barrier(); + URTX0((u32)sport->port.membase) = '\r'; + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore UCR1/2 + */ + while (!(USR2((u32)sport->port.membase) & USR2_TXDC)); + + UCR1((u32)sport->port.membase) = old_ucr1; + UCR2((u32)sport->port.membase) = old_ucr2; +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +imx_console_get_options(struct imx_port *sport, int *baud, + int *parity, int *bits) +{ + if ( UCR1((u32)sport->port.membase) | UCR1_UARTEN ) { + /* ok, the port was enabled */ + unsigned int ucr2, ubir,ubmr, uartclk; + + ucr2 = UCR2((u32)sport->port.membase); + + *parity = 'n'; + if (ucr2 & UCR2_PREN) { + if (ucr2 & UCR2_PROE) + *parity = 'o'; + else + *parity = 'e'; + } + + if (ucr2 & UCR2_WS) + *bits = 8; + else + *bits = 7; + + ubir = UBIR((u32)sport->port.membase) & 0xffff; + ubmr = UBMR((u32)sport->port.membase) & 0xffff; + uartclk = sport->port.uartclk; + + *baud = ((uartclk/16) * (ubir + 1)) / (ubmr + 1); + } +} + +static int __init +imx_console_setup(struct console *co, char *options) +{ + struct imx_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports)) + co->index = 0; + sport = &imx_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + imx_console_get_options(sport, &baud, &parity, &bits); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +extern struct uart_driver imx_reg; +static struct console imx_console = { + .name = "ttySMX", + .write = imx_console_write, + .device = uart_console_device, + .setup = imx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &imx_reg, +}; + +static int __init imx_rs_console_init(void) +{ + imx_init_ports(); + register_console(&imx_console); + return 0; +} +console_initcall(imx_rs_console_init); + +#define IMX_CONSOLE &imx_console +#else +#define IMX_CONSOLE NULL +#endif + +static struct uart_driver imx_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = "ttySMX", + .devfs_name = "ttsmx/", + .major = SERIAL_IMX_MAJOR, + .minor = MINOR_START, + .nr = ARRAY_SIZE(imx_ports), + .cons = IMX_CONSOLE, +}; + +static int serial_imx_suspend(struct device *_dev, u32 state, u32 level) +{ + struct imx_port *sport = dev_get_drvdata(_dev); + + if (sport && level == SUSPEND_DISABLE) + uart_suspend_port(&imx_reg, &sport->port); + + return 0; +} + +static int serial_imx_resume(struct device *_dev, u32 level) +{ + struct imx_port *sport = dev_get_drvdata(_dev); + + if (sport && level == RESUME_ENABLE) + uart_resume_port(&imx_reg, &sport->port); + + return 0; +} + +static int serial_imx_probe(struct device *_dev) +{ + struct platform_device *dev = to_platform_device(_dev); + + imx_ports[dev->id].port.dev = _dev; + uart_add_one_port(&imx_reg, &imx_ports[dev->id].port); + dev_set_drvdata(_dev, &imx_ports[dev->id]); + return 0; +} + +static int serial_imx_remove(struct device *_dev) +{ + struct imx_port *sport = dev_get_drvdata(_dev); + + dev_set_drvdata(_dev, NULL); + + if (sport) + uart_remove_one_port(&imx_reg, &sport->port); + + return 0; +} + +static struct device_driver serial_imx_driver = { + .name = "imx-uart", + .bus = &platform_bus_type, + .probe = serial_imx_probe, + .remove = serial_imx_remove, + + .suspend = serial_imx_suspend, + .resume = serial_imx_resume, +}; + +static int __init imx_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: IMX driver\n"); + + imx_init_ports(); + + ret = uart_register_driver(&imx_reg); + if (ret) + return ret; + + ret = driver_register(&serial_imx_driver); + if (ret != 0) + uart_unregister_driver(&imx_reg); + + return 0; +} + +static void __exit imx_serial_exit(void) +{ + uart_unregister_driver(&imx_reg); +} + +module_init(imx_serial_init); +module_exit(imx_serial_exit); + +MODULE_AUTHOR("Sascha Hauer"); +MODULE_DESCRIPTION("IMX generic serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c new file mode 100644 index 000000000000..d054f1265701 --- /dev/null +++ b/drivers/serial/ioc4_serial.c @@ -0,0 +1,2909 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved. + */ + + +/* + * This file contains a module version of the ioc4 serial driver. This + * includes all the support functions needed (support functions, etc.) + * and the serial driver itself. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * interesting things about the ioc4 + */ + +#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */ +#define IOC4_NUM_CARDS 8 /* max cards per partition */ + +#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \ + (_n == 1) ? (IOC4_SIO_IR_S1) : \ + (_n == 2) ? (IOC4_SIO_IR_S2) : \ + (IOC4_SIO_IR_S3) + +#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \ + (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \ + (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \ + (IOC4_OTHER_IR_S3_MEMERR) + + +/* + * All IOC4 registers are 32 bits wide. + */ + +/* + * PCI Memory Space Map + */ +#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */ +#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0) +#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1) +#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1) +#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1) +#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5) +#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6) + +/* Interrupt types */ +#define IOC4_SIO_INTR_TYPE 0 +#define IOC4_OTHER_INTR_TYPE 1 +#define IOC4_NUM_INTR_TYPES 2 + +/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */ +#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */ +#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */ +#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */ +#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */ +#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */ +#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */ +#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */ +#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */ +#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */ +#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */ +#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */ +#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */ +#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */ +#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */ +#define IOC4_SIO_IR_S1_INT 0x00004000 /* */ +#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */ +#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */ +#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */ +#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */ +#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */ +#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */ +#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */ +#define IOC4_SIO_IR_S2_INT 0x00400000 /* */ +#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */ +#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */ +#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */ +#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */ +#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */ +#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */ +#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */ +#define IOC4_SIO_IR_S3_INT 0x40000000 /* */ +#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */ + +/* Per device interrupt masks */ +#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \ + IOC4_SIO_IR_S0_RX_FULL | \ + IOC4_SIO_IR_S0_RX_HIGH | \ + IOC4_SIO_IR_S0_RX_TIMER | \ + IOC4_SIO_IR_S0_DELTA_DCD | \ + IOC4_SIO_IR_S0_DELTA_CTS | \ + IOC4_SIO_IR_S0_INT | \ + IOC4_SIO_IR_S0_TX_EXPLICIT) +#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \ + IOC4_SIO_IR_S1_RX_FULL | \ + IOC4_SIO_IR_S1_RX_HIGH | \ + IOC4_SIO_IR_S1_RX_TIMER | \ + IOC4_SIO_IR_S1_DELTA_DCD | \ + IOC4_SIO_IR_S1_DELTA_CTS | \ + IOC4_SIO_IR_S1_INT | \ + IOC4_SIO_IR_S1_TX_EXPLICIT) +#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \ + IOC4_SIO_IR_S2_RX_FULL | \ + IOC4_SIO_IR_S2_RX_HIGH | \ + IOC4_SIO_IR_S2_RX_TIMER | \ + IOC4_SIO_IR_S2_DELTA_DCD | \ + IOC4_SIO_IR_S2_DELTA_CTS | \ + IOC4_SIO_IR_S2_INT | \ + IOC4_SIO_IR_S2_TX_EXPLICIT) +#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \ + IOC4_SIO_IR_S3_RX_FULL | \ + IOC4_SIO_IR_S3_RX_HIGH | \ + IOC4_SIO_IR_S3_RX_TIMER | \ + IOC4_SIO_IR_S3_DELTA_DCD | \ + IOC4_SIO_IR_S3_DELTA_CTS | \ + IOC4_SIO_IR_S3_INT | \ + IOC4_SIO_IR_S3_TX_EXPLICIT) + +/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */ +#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */ +#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */ +#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */ +#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */ +#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */ +#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */ + +/* Bitmasks for IOC4_SIO_CR */ +#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */ +#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000 +#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010 +#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020 +#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030 +#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040 +#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050 +#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060 +#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070 +#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among + serial ports (ro) */ +/* Defs for some of the generic I/O pins */ +#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0 + mode sel */ +#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1 + mode sel */ +#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2 + mode sel */ +#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3 + mode sel */ + +#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling + uart 0 mode select */ +#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling + uart 1 mode select */ +#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling + uart 2 mode select */ +#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling + uart 3 mode select */ + +/* Bitmasks for serial RX status byte */ +#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */ +#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */ +#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */ +#define IOC4_RXSB_BREAK 0x08 /* Break character */ +#define IOC4_RXSB_CTS 0x10 /* State of CTS */ +#define IOC4_RXSB_DCD 0x20 /* State of DCD */ +#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */ +#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR + * & BREAK valid */ + +/* Bitmasks for serial TX control byte */ +#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */ +#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */ +#define IOC4_TXCB_VALID 0x40 /* Byte is valid */ +#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */ +#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */ + +/* Bitmasks for IOC4_SBBR_L */ +#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */ + +/* Bitmasks for IOC4_SSCR_<3:0> */ +#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */ +#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ +#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */ +#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */ +#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */ +#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */ +#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */ +#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */ +#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */ +#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */ +#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */ + +/* All producer/comsumer pointers are the same bitfield */ +#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */ +#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */ +#define IOC4_PROD_CONS_PTR_OFF 3 + +/* Bitmasks for IOC4_SRCIR_<3:0> */ +#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */ + +/* Bitmasks for IOC4_SHADOW_<3:0> */ +#define IOC4_SHADOW_DR 0x00000001 /* Data ready */ +#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */ +#define IOC4_SHADOW_PE 0x00000004 /* Parity error */ +#define IOC4_SHADOW_FE 0x00000008 /* Framing error */ +#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */ +#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */ +#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */ +#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */ +#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */ +#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */ +#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */ +#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */ +#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */ +#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */ +#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ +#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ +#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */ + +/* Bitmasks for IOC4_SRTR_<3:0> */ +#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */ +#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */ +#define IOC4_SRTR_CNT_VAL_SHIFT 16 +#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */ + +/* Serial port register map used for DMA and PIO serial I/O */ +struct ioc4_serialregs { + uint32_t sscr; + uint32_t stpir; + uint32_t stcir; + uint32_t srpir; + uint32_t srcir; + uint32_t srtr; + uint32_t shadow; +}; + +/* IOC4 UART register map */ +struct ioc4_uartregs { + char i4u_lcr; + union { + char iir; /* read only */ + char fcr; /* write only */ + } u3; + union { + char ier; /* DLAB == 0 */ + char dlm; /* DLAB == 1 */ + } u2; + union { + char rbr; /* read only, DLAB == 0 */ + char thr; /* write only, DLAB == 0 */ + char dll; /* DLAB == 1 */ + } u1; + char i4u_scr; + char i4u_msr; + char i4u_lsr; + char i4u_mcr; +}; + +/* short names */ +#define i4u_dll u1.dll +#define i4u_ier u2.ier +#define i4u_dlm u2.dlm +#define i4u_fcr u3.fcr + +/* PCI memory space register map addressed using pci_bar0 */ +struct ioc4_memregs { + struct ioc4_mem { + /* Miscellaneous IOC4 registers */ + uint32_t pci_err_addr_l; + uint32_t pci_err_addr_h; + uint32_t sio_ir; + uint32_t other_ir; + + /* These registers are read-only for general kernel code. */ + uint32_t sio_ies_ro; + uint32_t other_ies_ro; + uint32_t sio_iec_ro; + uint32_t other_iec_ro; + uint32_t sio_cr; + uint32_t misc_fill1; + uint32_t int_out; + uint32_t misc_fill2; + uint32_t gpcr_s; + uint32_t gpcr_c; + uint32_t gpdr; + uint32_t misc_fill3; + uint32_t gppr_0; + uint32_t gppr_1; + uint32_t gppr_2; + uint32_t gppr_3; + uint32_t gppr_4; + uint32_t gppr_5; + uint32_t gppr_6; + uint32_t gppr_7; + } ioc4_mem; + + char misc_fill4[0x100 - 0x5C - 4]; + + /* ATA/ATAP registers */ + uint32_t ata_notused[9]; + char ata_fill1[0x140 - 0x120 - 4]; + uint32_t ata_notused1[8]; + char ata_fill2[0x200 - 0x15C - 4]; + + /* Keyboard and mouse registers */ + uint32_t km_notused[5];; + char km_fill1[0x300 - 0x210 - 4]; + + /* Serial port registers used for DMA serial I/O */ + struct ioc4_serial { + uint32_t sbbr01_l; + uint32_t sbbr01_h; + uint32_t sbbr23_l; + uint32_t sbbr23_h; + + struct ioc4_serialregs port_0; + struct ioc4_serialregs port_1; + struct ioc4_serialregs port_2; + struct ioc4_serialregs port_3; + struct ioc4_uartregs uart_0; + struct ioc4_uartregs uart_1; + struct ioc4_uartregs uart_2; + struct ioc4_uartregs uart_3; + } ioc4_serial; +}; + +/* UART clock speed */ +#define IOC4_SER_XIN_CLK IOC4_SER_XIN_CLK_66 +#define IOC4_SER_XIN_CLK_66 66666667 +#define IOC4_SER_XIN_CLK_33 33333333 + +#define IOC4_W_IES 0 +#define IOC4_W_IEC 1 + +typedef void ioc4_intr_func_f(void *, uint32_t); +typedef ioc4_intr_func_f *ioc4_intr_func_t; + +/* defining this will get you LOTS of great debug info */ +//#define DEBUG_INTERRUPTS +#define DPRINT_CONFIG(_x...) ; +//#define DPRINT_CONFIG(_x...) printk _x + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* number of characters we want to transmit to the lower level at a time */ +#define IOC4_MAX_CHARS 128 + +/* Device name we're using */ +#define DEVICE_NAME "ttyIOC" +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR 50 + +/* register offsets */ +#define IOC4_SERIAL_OFFSET 0x300 + +/* flags for next_char_state */ +#define NCS_BREAK 0x1 +#define NCS_PARITY 0x2 +#define NCS_FRAMING 0x4 +#define NCS_OVERRUN 0x8 + +/* cause we need SOME parameters ... */ +#define MIN_BAUD_SUPPORTED 1200 +#define MAX_BAUD_SUPPORTED 115200 + +/* protocol types supported */ +enum sio_proto { + PROTO_RS232, + PROTO_RS422 +}; + +/* Notification types */ +#define N_DATA_READY 0x01 +#define N_OUTPUT_LOWAT 0x02 +#define N_BREAK 0x04 +#define N_PARITY_ERROR 0x08 +#define N_FRAMING_ERROR 0x10 +#define N_OVERRUN_ERROR 0x20 +#define N_DDCD 0x40 +#define N_DCTS 0x80 + +#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \ + N_PARITY_ERROR | N_FRAMING_ERROR | \ + N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define N_ALL_OUTPUT N_OUTPUT_LOWAT + +#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR) + +#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \ + N_PARITY_ERROR | N_FRAMING_ERROR | \ + N_OVERRUN_ERROR | N_DDCD | N_DCTS) + +#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16)) +#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div)) + +/* Some masks */ +#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \ + | UART_LCR_WLEN7 | UART_LCR_WLEN8) +#define LCR_MASK_STOP_BITS (UART_LCR_STOP) + +#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir) & _p->ip_ienb) +#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir) + +/* Default to 4k buffers */ +#ifdef IOC4_1K_BUFFERS +#define RING_BUF_SIZE 1024 +#define IOC4_BUF_SIZE_BIT 0 +#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K +#else +#define RING_BUF_SIZE 4096 +#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE +#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K +#endif + +#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4) + +/* + * This is the entry saved by the driver - one per card + */ +struct ioc4_control { + int ic_irq; + struct { + /* uart ports are allocated here */ + struct uart_port icp_uart_port; + /* Handy reference material */ + struct ioc4_port *icp_port; + } ic_port[IOC4_NUM_SERIAL_PORTS]; + struct ioc4_soft *ic_soft; +}; + +/* + * per-IOC4 data structure + */ +#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t)) +struct ioc4_soft { + struct ioc4_mem __iomem *is_ioc4_mem_addr; + struct ioc4_serial __iomem *is_ioc4_serial_addr; + + /* Each interrupt type has an entry in the array */ + struct ioc4_intr_type { + + /* + * Each in-use entry in this array contains at least + * one nonzero bit in sd_bits; no two entries in this + * array have overlapping sd_bits values. + */ + struct ioc4_intr_info { + uint32_t sd_bits; + ioc4_intr_func_f *sd_intr; + void *sd_info; + } is_intr_info[MAX_IOC4_INTR_ENTS]; + + /* Number of entries active in the above array */ + atomic_t is_num_intrs; + } is_intr_type[IOC4_NUM_INTR_TYPES]; + + /* is_ir_lock must be held while + * modifying sio_ie values, so + * we can be sure that sio_ie is + * not changing when we read it + * along with sio_ir. + */ + spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */ +}; + +/* Local port info for each IOC4 serial ports */ +struct ioc4_port { + struct uart_port *ip_port; + /* Back ptrs for this port */ + struct ioc4_control *ip_control; + struct pci_dev *ip_pdev; + struct ioc4_soft *ip_ioc4_soft; + + /* pci mem addresses */ + struct ioc4_mem __iomem *ip_mem; + struct ioc4_serial __iomem *ip_serial; + struct ioc4_serialregs __iomem *ip_serial_regs; + struct ioc4_uartregs __iomem *ip_uart_regs; + + /* Ring buffer page for this port */ + dma_addr_t ip_dma_ringbuf; + /* vaddr of ring buffer */ + struct ring_buffer *ip_cpu_ringbuf; + + /* Rings for this port */ + struct ring *ip_inring; + struct ring *ip_outring; + + /* Hook to port specific values */ + struct hooks *ip_hooks; + + spinlock_t ip_lock; + + /* Various rx/tx parameters */ + int ip_baud; + int ip_tx_lowat; + int ip_rx_timeout; + + /* Copy of notification bits */ + int ip_notify; + + /* Shadow copies of various registers so we don't need to PIO + * read them constantly + */ + uint32_t ip_ienb; /* Enabled interrupts */ + uint32_t ip_sscr; + uint32_t ip_tx_prod; + uint32_t ip_rx_cons; + int ip_pci_bus_speed; + unsigned char ip_flags; +}; + +/* tx low water mark. We need to notify the driver whenever tx is getting + * close to empty so it can refill the tx buffer and keep things going. + * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll + * have no trouble getting in more chars in time (I certainly hope so). + */ +#define TX_LOWAT_LATENCY 1000 +#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY) +#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ) + +/* Flags per port */ +#define INPUT_HIGH 0x01 +#define DCD_ON 0x02 +#define LOWAT_WRITTEN 0x04 +#define READ_ABORTED 0x08 + +/* Since each port has different register offsets and bitmasks + * for everything, we'll store those that we need in tables so we + * don't have to be constantly checking the port we are dealing with. + */ +struct hooks { + uint32_t intr_delta_dcd; + uint32_t intr_delta_cts; + uint32_t intr_tx_mt; + uint32_t intr_rx_timer; + uint32_t intr_rx_high; + uint32_t intr_tx_explicit; + uint32_t intr_dma_error; + uint32_t intr_clear; + uint32_t intr_all; + char rs422_select_pin; +}; + +static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = { + /* Values for port 0 */ + { + IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS, + IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER, + IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT, + IOC4_OTHER_IR_S0_MEMERR, + (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL | + IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER | + IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS | + IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT), + IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN, + }, + + /* Values for port 1 */ + { + IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS, + IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER, + IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT, + IOC4_OTHER_IR_S1_MEMERR, + (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL | + IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER | + IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS | + IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT), + IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN, + }, + + /* Values for port 2 */ + { + IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS, + IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER, + IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT, + IOC4_OTHER_IR_S2_MEMERR, + (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL | + IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER | + IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS | + IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT), + IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN, + }, + + /* Values for port 3 */ + { + IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS, + IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER, + IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT, + IOC4_OTHER_IR_S3_MEMERR, + (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL | + IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER | + IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS | + IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT), + IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN, + } +}; + +/* A ring buffer entry */ +struct ring_entry { + union { + struct { + uint32_t alldata; + uint32_t allsc; + } all; + struct { + char data[4]; /* data bytes */ + char sc[4]; /* status/control */ + } s; + } u; +}; + +/* Test the valid bits in any of the 4 sc chars using "allsc" member */ +#define RING_ANY_VALID \ + ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101) + +#define ring_sc u.s.sc +#define ring_data u.s.data +#define ring_allsc u.all.allsc + +/* Number of entries per ring buffer. */ +#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry)) + +/* An individual ring */ +struct ring { + struct ring_entry entries[ENTRIES_PER_RING]; +}; + +/* The whole enchilada */ +struct ring_buffer { + struct ring TX_0_OR_2; + struct ring RX_0_OR_2; + struct ring TX_1_OR_3; + struct ring RX_1_OR_3; +}; + +/* Get a ring from a port struct */ +#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh) + +/* Infinite loop detection. + */ +#define MAXITER 10000000 + +/* Prototypes */ +static void receive_chars(struct uart_port *); +static void handle_intr(void *arg, uint32_t sio_ir); + +/** + * write_ireg - write the interrupt regs + * @ioc4_soft: ptr to soft struct for this port + * @val: value to write + * @which: which register + * @type: which ireg set + */ +static inline void +write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type) +{ + struct ioc4_mem __iomem *mem = ioc4_soft->is_ioc4_mem_addr; + unsigned long flags; + + spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags); + + switch (type) { + case IOC4_SIO_INTR_TYPE: + switch (which) { + case IOC4_W_IES: + writel(val, &mem->sio_ies_ro); + break; + + case IOC4_W_IEC: + writel(val, &mem->sio_iec_ro); + break; + } + break; + + case IOC4_OTHER_INTR_TYPE: + switch (which) { + case IOC4_W_IES: + writel(val, &mem->other_ies_ro); + break; + + case IOC4_W_IEC: + writel(val, &mem->other_iec_ro); + break; + } + break; + + default: + break; + } + spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags); +} + +/** + * set_baud - Baud rate setting code + * @port: port to set + * @baud: baud rate to use + */ +static int set_baud(struct ioc4_port *port, int baud) +{ + int actual_baud; + int diff; + int lcr; + unsigned short divisor; + struct ioc4_uartregs __iomem *uart; + + divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed); + if (!divisor) + return 1; + actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed); + + diff = actual_baud - baud; + if (diff < 0) + diff = -diff; + + /* If we're within 1%, we've found a match */ + if (diff * 100 > actual_baud) + return 1; + + uart = port->ip_uart_regs; + lcr = readb(&uart->i4u_lcr); + writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr); + writeb((unsigned char)divisor, &uart->i4u_dll); + writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm); + writeb(lcr, &uart->i4u_lcr); + return 0; +} + + +/** + * get_ioc4_port - given a uart port, return the control structure + * @port: uart port + */ +static struct ioc4_port *get_ioc4_port(struct uart_port *the_port) +{ + struct ioc4_control *control = dev_get_drvdata(the_port->dev); + int ii; + + if (control) { + for ( ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++ ) { + if (!control->ic_port[ii].icp_port) + continue; + if (the_port == control->ic_port[ii].icp_port->ip_port) + return control->ic_port[ii].icp_port; + } + } + return NULL; +} + +/* The IOC4 hardware provides no atomic way to determine if interrupts + * are pending since two reads are required to do so. The handler must + * read the SIO_IR and the SIO_IES, and take the logical and of the + * two. When this value is zero, all interrupts have been serviced and + * the handler may return. + * + * This has the unfortunate "hole" that, if some other CPU or + * some other thread or some higher level interrupt manages to + * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may + * think we have observed SIO_IR&SIO_IE==0 when in fact this + * condition never really occurred. + * + * To solve this, we use a simple spinlock that must be held + * whenever modifying SIO_IE; holding this lock while observing + * both SIO_IR and SIO_IE guarantees that we do not falsely + * conclude that no enabled interrupts are pending. + */ + +static inline uint32_t +pending_intrs(struct ioc4_soft *soft, int type) +{ + struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr; + unsigned long flag; + uint32_t intrs = 0; + + BUG_ON(!((type == IOC4_SIO_INTR_TYPE) + || (type == IOC4_OTHER_INTR_TYPE))); + + spin_lock_irqsave(&soft->is_ir_lock, flag); + + switch (type) { + case IOC4_SIO_INTR_TYPE: + intrs = readl(&mem->sio_ir) & readl(&mem->sio_ies_ro); + break; + + case IOC4_OTHER_INTR_TYPE: + intrs = readl(&mem->other_ir) & readl(&mem->other_ies_ro); + + /* Don't process any ATA interrupte */ + intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); + break; + + default: + break; + } + spin_unlock_irqrestore(&soft->is_ir_lock, flag); + return intrs; +} + +/** + * port_init - Initialize the sio and ioc4 hardware for a given port + * called per port from attach... + * @port: port to initialize + */ +static int inline port_init(struct ioc4_port *port) +{ + uint32_t sio_cr; + struct hooks *hooks = port->ip_hooks; + struct ioc4_uartregs __iomem *uart; + + /* Idle the IOC4 serial interface */ + writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr); + + /* Wait until any pending bus activity for this port has ceased */ + do + sio_cr = readl(&port->ip_mem->sio_cr); + while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE)); + + /* Finish reset sequence */ + writel(0, &port->ip_serial_regs->sscr); + + /* Once RESET is done, reload cached tx_prod and rx_cons values + * and set rings to empty by making prod == cons + */ + port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + writel(port->ip_tx_prod, &port->ip_serial_regs->stpir); + port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + writel(port->ip_rx_cons, &port->ip_serial_regs->srcir); + + /* Disable interrupts for this 16550 */ + uart = port->ip_uart_regs; + writeb(0, &uart->i4u_lcr); + writeb(0, &uart->i4u_ier); + + /* Set the default baud */ + set_baud(port, port->ip_baud); + + /* Set line control to 8 bits no parity */ + writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Enable the FIFOs */ + writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr); + /* then reset 16550 FIFOs */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + &uart->i4u_fcr); + + /* Clear modem control register */ + writeb(0, &uart->i4u_mcr); + + /* Clear deltas in modem status register */ + readb(&uart->i4u_msr); + + /* Only do this once per port pair */ + if (port->ip_hooks == &hooks_array[0] + || port->ip_hooks == &hooks_array[2]) { + unsigned long ring_pci_addr; + uint32_t __iomem *sbbr_l; + uint32_t __iomem *sbbr_h; + + if (port->ip_hooks == &hooks_array[0]) { + sbbr_l = &port->ip_serial->sbbr01_l; + sbbr_h = &port->ip_serial->sbbr01_h; + } else { + sbbr_l = &port->ip_serial->sbbr23_l; + sbbr_h = &port->ip_serial->sbbr23_h; + } + + ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf; + DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n", + __FUNCTION__, ring_pci_addr)); + + writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h); + writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l); + } + + /* Set the receive timeout value to 10 msec */ + writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr); + + /* Set rx threshold, enable DMA */ + /* Set high water mark at 3/4 of full ring */ + port->ip_sscr = (ENTRIES_PER_RING * 3 / 4); + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Disable and clear all serial related interrupt bits */ + write_ireg(port->ip_ioc4_soft, hooks->intr_clear, + IOC4_W_IEC, IOC4_SIO_INTR_TYPE); + port->ip_ienb &= ~hooks->intr_clear; + writel(hooks->intr_clear, &port->ip_mem->sio_ir); + return 0; +} + +/** + * handle_dma_error_intr - service any pending DMA error interrupts for the + * given port - 2nd level called via sd_intr + * @arg: handler arg + * @other_ir: ioc4regs + */ +static void handle_dma_error_intr(void *arg, uint32_t other_ir) +{ + struct ioc4_port *port = (struct ioc4_port *)arg; + struct hooks *hooks = port->ip_hooks; + unsigned int flags; + + spin_lock_irqsave(&port->ip_lock, flags); + + /* ACK the interrupt */ + writel(hooks->intr_dma_error, &port->ip_mem->other_ir); + + if (readl(&port->ip_mem->pci_err_addr_l) & IOC4_PCI_ERR_ADDR_VLD) { + printk(KERN_ERR + "PCI error address is 0x%lx, " + "master is serial port %c %s\n", + (((uint64_t)readl(&port->ip_mem->pci_err_addr_h) + << 32) + | readl(&port->ip_mem->pci_err_addr_l)) + & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' + + ((char)(readl(&port->ip_mem-> pci_err_addr_l) & + IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1), + (readl(&port->ip_mem->pci_err_addr_l) + & IOC4_PCI_ERR_ADDR_MST_TYP_MSK) + ? "RX" : "TX"); + + if (readl(&port->ip_mem->pci_err_addr_l) + & IOC4_PCI_ERR_ADDR_MUL_ERR) { + printk(KERN_ERR + "Multiple errors occurred\n"); + } + } + spin_unlock_irqrestore(&port->ip_lock, flags); + + /* Re-enable DMA error interrupts */ + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES, + IOC4_OTHER_INTR_TYPE); +} + +/** + * intr_connect - interrupt connect function + * @soft: soft struct for this card + * @type: interrupt type + * @intrbits: bit pattern to set + * @intr: handler function + * @info: handler arg + */ +static void +intr_connect(struct ioc4_soft *soft, int type, + uint32_t intrbits, ioc4_intr_func_f * intr, void *info) +{ + int i; + struct ioc4_intr_info *intr_ptr; + + BUG_ON(!((type == IOC4_SIO_INTR_TYPE) + || (type == IOC4_OTHER_INTR_TYPE))); + + i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1; + BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0))); + + /* Save off the lower level interrupt handler */ + intr_ptr = &soft->is_intr_type[type].is_intr_info[i]; + intr_ptr->sd_bits = intrbits; + intr_ptr->sd_intr = intr; + intr_ptr->sd_info = info; +} + +/** + * ioc4_intr - Top level IOC4 interrupt handler. + * @irq: irq value + * @arg: handler arg + * @regs: registers + */ +static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs) +{ + struct ioc4_soft *soft; + uint32_t this_ir, this_mir; + int xx, num_intrs = 0; + int intr_type; + int handled = 0; + struct ioc4_intr_info *ii; + + soft = arg; + for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) { + num_intrs = (int)atomic_read( + &soft->is_intr_type[intr_type].is_num_intrs); + + this_mir = this_ir = pending_intrs(soft, intr_type); + + /* Farm out the interrupt to the various drivers depending on + * which interrupt bits are set. + */ + for (xx = 0; xx < num_intrs; xx++) { + ii = &soft->is_intr_type[intr_type].is_intr_info[xx]; + if ((this_mir = this_ir & ii->sd_bits)) { + /* Disable owned interrupts, call handler */ + handled++; + write_ireg(soft, ii->sd_bits, IOC4_W_IEC, + intr_type); + ii->sd_intr(ii->sd_info, this_mir); + this_ir &= ~this_mir; + } + } + if (this_ir) { + printk(KERN_ERR + "unknown IOC4 %s interrupt 0x%x, sio_ir = 0x%x," + " sio_ies = 0x%x, other_ir = 0x%x :" + "other_ies = 0x%x\n", + (intr_type == IOC4_SIO_INTR_TYPE) ? "sio" : + "other", this_ir, + readl(&soft->is_ioc4_mem_addr->sio_ir), + readl(&soft->is_ioc4_mem_addr->sio_ies_ro), + readl(&soft->is_ioc4_mem_addr->other_ir), + readl(&soft->is_ioc4_mem_addr->other_ies_ro)); + } + } +#ifdef DEBUG_INTERRUPTS + { + struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr; + spinlock_t *lp = &soft->is_ir_lock; + unsigned long flag; + + spin_lock_irqsave(&soft->is_ir_lock, flag); + printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies_ro 0x%x " + "other_ir 0x%x other_ies_ro 0x%x mask 0x%x\n", + __FUNCTION__, __LINE__, + (void *)mem, readl(&mem->sio_ir), + readl(&mem->sio_ies_ro), + readl(&mem->other_ir), + readl(&mem->other_ies_ro), + IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR); + spin_unlock_irqrestore(&soft->is_ir_lock, flag); + } +#endif + return handled ? IRQ_HANDLED : IRQ_NONE; +} + +/** + * ioc4_attach_local - Device initialization. + * Called at *_attach() time for each + * IOC4 with serial ports in the system. + * @control: ioc4_control ptr + * @pdev: PCI handle for this device + * @soft: soft struct for this device + * @ioc4: ioc4 mem space + */ +static int inline ioc4_attach_local(struct pci_dev *pdev, + struct ioc4_control *control, + struct ioc4_soft *soft, void __iomem *ioc4_mem, + void __iomem *ioc4_serial) +{ + struct ioc4_port *port; + struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS]; + int port_number; + uint16_t ioc4_revid_min = 62; + uint16_t ioc4_revid; + + /* IOC4 firmware must be at least rev 62 */ + pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid); + + printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid); + if (ioc4_revid < ioc4_revid_min) { + printk(KERN_WARNING + "IOC4 serial not supported on firmware rev %d, " + "please upgrade to rev %d or higher\n", + ioc4_revid, ioc4_revid_min); + return -EPERM; + } + BUG_ON(ioc4_mem == NULL); + BUG_ON(ioc4_serial == NULL); + + /* Create port structures for each port */ + for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS; + port_number++) { + port = kmalloc(sizeof(struct ioc4_port), GFP_KERNEL); + if (!port) { + printk(KERN_WARNING + "IOC4 serial memory not available for port\n"); + return -ENOMEM; + } + memset(port, 0, sizeof(struct ioc4_port)); + + /* we need to remember the previous ones, to point back to + * them farther down - setting up the ring buffers. + */ + ports[port_number] = port; + + /* Allocate buffers and jumpstart the hardware. */ + control->ic_port[port_number].icp_port = port; + port->ip_ioc4_soft = soft; + port->ip_pdev = pdev; + port->ip_ienb = 0; + port->ip_pci_bus_speed = IOC4_SER_XIN_CLK; + port->ip_baud = 9600; + port->ip_control = control; + port->ip_mem = ioc4_mem; + port->ip_serial = ioc4_serial; + + /* point to the right hook */ + port->ip_hooks = &hooks_array[port_number]; + + /* Get direct hooks to the serial regs and uart regs + * for this port + */ + switch (port_number) { + case 0: + port->ip_serial_regs = &(port->ip_serial->port_0); + port->ip_uart_regs = &(port->ip_serial->uart_0); + break; + case 1: + port->ip_serial_regs = &(port->ip_serial->port_1); + port->ip_uart_regs = &(port->ip_serial->uart_1); + break; + case 2: + port->ip_serial_regs = &(port->ip_serial->port_2); + port->ip_uart_regs = &(port->ip_serial->uart_2); + break; + default: + case 3: + port->ip_serial_regs = &(port->ip_serial->port_3); + port->ip_uart_regs = &(port->ip_serial->uart_3); + break; + } + + /* ring buffers are 1 to a pair of ports */ + if (port_number && (port_number & 1)) { + /* odd use the evens buffer */ + port->ip_dma_ringbuf = + ports[port_number - 1]->ip_dma_ringbuf; + port->ip_cpu_ringbuf = + ports[port_number - 1]->ip_cpu_ringbuf; + port->ip_inring = RING(port, RX_1_OR_3); + port->ip_outring = RING(port, TX_1_OR_3); + + } else { + if (port->ip_dma_ringbuf == 0) { + port->ip_cpu_ringbuf = pci_alloc_consistent + (pdev, TOTAL_RING_BUF_SIZE, + &port->ip_dma_ringbuf); + + } + BUG_ON(!((((int64_t)port->ip_dma_ringbuf) & + (TOTAL_RING_BUF_SIZE - 1)) == 0)); + DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p " + "ip_dma_ringbuf 0x%p\n", + __FUNCTION__, + (void *)port->ip_cpu_ringbuf, + (void *)port->ip_dma_ringbuf)); + port->ip_inring = RING(port, RX_0_OR_2); + port->ip_outring = RING(port, TX_0_OR_2); + } + DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p", + __FUNCTION__, + port_number, (void *)port, (void *)control)); + DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n", + (void *)port->ip_serial_regs, + (void *)port->ip_uart_regs)); + + /* Initialize the hardware for IOC4 */ + port_init(port); + + DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p " + "outring 0x%p\n", + __FUNCTION__, + port_number, (void *)port, + (void *)port->ip_inring, + (void *)port->ip_outring)); + + /* Attach interrupt handlers */ + intr_connect(soft, IOC4_SIO_INTR_TYPE, + GET_SIO_IR(port_number), + handle_intr, port); + + intr_connect(soft, IOC4_OTHER_INTR_TYPE, + GET_OTHER_IR(port_number), + handle_dma_error_intr, port); + } + return 0; +} + +/** + * enable_intrs - enable interrupts + * @port: port to enable + * @mask: mask to use + */ +static void enable_intrs(struct ioc4_port *port, uint32_t mask) +{ + struct hooks *hooks = port->ip_hooks; + + if ((port->ip_ienb & mask) != mask) { + write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES, + IOC4_SIO_INTR_TYPE); + port->ip_ienb |= mask; + } + + if (port->ip_ienb) + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, + IOC4_W_IES, IOC4_OTHER_INTR_TYPE); +} + +/** + * local_open - local open a port + * @port: port to open + */ +static inline int local_open(struct ioc4_port *port) +{ + int spiniter = 0; + + port->ip_flags = 0; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while((readl(&port->ip_serial_regs-> sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) { + return -1; + } + } + } + + /* Reset the input fifo. If the uart received chars while the port + * was closed and DMA is not enabled, the uart may have a bunch of + * chars hanging around in its rx fifo which will not be discarded + * by rclr in the upper layer. We must get rid of them here. + */ + writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR, + &port->ip_uart_regs->i4u_fcr); + + writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr); + /* UART_LCR_STOP == 1 stop */ + + /* Re-enable DMA, set default threshold to intr whenever there is + * data available. + */ + port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; + port->ip_sscr |= 1; /* default threshold */ + + /* Plug in the new sscr. This implicitly clears the DMA_PAUSE + * flag if it was set above + */ + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + port->ip_tx_lowat = 1; + return 0; +} + +/** + * set_rx_timeout - Set rx timeout and threshold values. + * @port: port to use + * @timeout: timeout value in ticks + */ +static inline int set_rx_timeout(struct ioc4_port *port, int timeout) +{ + int threshold; + + port->ip_rx_timeout = timeout; + + /* Timeout is in ticks. Let's figure out how many chars we + * can receive at the current baud rate in that interval + * and set the rx threshold to that amount. There are 4 chars + * per ring entry, so we'll divide the number of chars that will + * arrive in timeout by 4. + */ + threshold = timeout * port->ip_baud / 10 / HZ / 4; + if (threshold == 0) + threshold = 1; /* otherwise we'll intr all the time! */ + + if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD) + return 1; + + port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD; + port->ip_sscr |= threshold; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + + /* Now set the rx timeout to the given value */ + timeout = timeout * IOC4_SRTR_HZ / HZ; + if (timeout > IOC4_SRTR_CNT) + timeout = IOC4_SRTR_CNT; + + writel(timeout, &port->ip_serial_regs->srtr); + return 0; +} + +/** + * config_port - config the hardware + * @port: port to config + * @baud: baud rate for the port + * @byte_size: data size + * @stop_bits: number of stop bits + * @parenb: parity enable ? + * @parodd: odd parity ? + */ +static inline int +config_port(struct ioc4_port *port, + int baud, int byte_size, int stop_bits, int parenb, int parodd) +{ + char lcr, sizebits; + int spiniter = 0; + + DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n", + __FUNCTION__, baud, byte_size, stop_bits, parenb, parodd)); + + if (set_baud(port, baud)) + return 1; + + switch (byte_size) { + case 5: + sizebits = UART_LCR_WLEN5; + break; + case 6: + sizebits = UART_LCR_WLEN6; + break; + case 7: + sizebits = UART_LCR_WLEN7; + break; + case 8: + sizebits = UART_LCR_WLEN8; + break; + default: + return 1; + } + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while((readl(&port->ip_serial_regs->sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + + /* Clear relevant fields in lcr */ + lcr = readb(&port->ip_uart_regs->i4u_lcr); + lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR | + UART_LCR_PARITY | LCR_MASK_STOP_BITS); + + /* Set byte size in lcr */ + lcr |= sizebits; + + /* Set parity */ + if (parenb) { + lcr |= UART_LCR_PARITY; + if (!parodd) + lcr |= UART_LCR_EPAR; + } + + /* Set stop bits */ + if (stop_bits) + lcr |= UART_LCR_STOP /* 2 stop bits */ ; + + writeb(lcr, &port->ip_uart_regs->i4u_lcr); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + port->ip_baud = baud; + + /* When we get within this number of ring entries of filling the + * entire ring on tx, place an EXPLICIT intr to generate a lowat + * notification when output has drained. + */ + port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4; + if (port->ip_tx_lowat == 0) + port->ip_tx_lowat = 1; + + set_rx_timeout(port, port->ip_rx_timeout); + + return 0; +} + +/** + * do_write - Write bytes to the port. Returns the number of bytes + * actually written. Called from transmit_chars + * @port: port to use + * @buf: the stuff to write + * @len: how many bytes in 'buf' + */ +static inline int do_write(struct ioc4_port *port, char *buf, int len) +{ + int prod_ptr, cons_ptr, total = 0; + struct ring *outring; + struct ring_entry *entry; + struct hooks *hooks = port->ip_hooks; + + BUG_ON(!(len >= 0)); + + prod_ptr = port->ip_tx_prod; + cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK; + outring = port->ip_outring; + + /* Maintain a 1-entry red-zone. The ring buffer is full when + * (cons - prod) % ring_size is 1. Rather than do this subtraction + * in the body of the loop, I'll do it now. + */ + cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK; + + /* Stuff the bytes into the output */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + int xx; + + /* Get 4 bytes (one ring entry) at a time */ + entry = (struct ring_entry *)((caddr_t) outring + prod_ptr); + + /* Invalidate all entries */ + entry->ring_allsc = 0; + + /* Copy in some bytes */ + for (xx = 0; (xx < 4) && (len > 0); xx++) { + entry->ring_data[xx] = *buf++; + entry->ring_sc[xx] = IOC4_TXCB_VALID; + len--; + total++; + } + + /* If we are within some small threshold of filling up the + * entire ring buffer, we must place an EXPLICIT intr here + * to generate a lowat interrupt in case we subsequently + * really do fill up the ring and the caller goes to sleep. + * No need to place more than one though. + */ + if (!(port->ip_flags & LOWAT_WRITTEN) && + ((cons_ptr - prod_ptr) & PROD_CONS_MASK) + <= port->ip_tx_lowat + * (int)sizeof(struct ring_entry)) { + port->ip_flags |= LOWAT_WRITTEN; + entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE; + } + + /* Go on to next entry */ + prod_ptr += sizeof(struct ring_entry); + prod_ptr &= PROD_CONS_MASK; + } + + /* If we sent something, start DMA if necessary */ + if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) { + port->ip_sscr |= IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + + /* Store the new producer pointer. If tx is disabled, we stuff the + * data into the ring buffer, but we don't actually start tx. + */ + if (!uart_tx_stopped(port->ip_port)) { + writel(prod_ptr, &port->ip_serial_regs->stpir); + + /* If we are now transmitting, enable tx_mt interrupt so we + * can disable DMA if necessary when the tx finishes. + */ + if (total > 0) + enable_intrs(port, hooks->intr_tx_mt); + } + port->ip_tx_prod = prod_ptr; + return total; +} + +/** + * disable_intrs - disable interrupts + * @port: port to enable + * @mask: mask to use + */ +static void disable_intrs(struct ioc4_port *port, uint32_t mask) +{ + struct hooks *hooks = port->ip_hooks; + + if (port->ip_ienb & mask) { + write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC, + IOC4_SIO_INTR_TYPE); + port->ip_ienb &= ~mask; + } + + if (!port->ip_ienb) + write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, + IOC4_W_IEC, IOC4_OTHER_INTR_TYPE); +} + +/** + * set_notification - Modify event notification + * @port: port to use + * @mask: events mask + * @set_on: set ? + */ +static int set_notification(struct ioc4_port *port, int mask, int set_on) +{ + struct hooks *hooks = port->ip_hooks; + uint32_t intrbits, sscrbits; + + BUG_ON(!mask); + + intrbits = sscrbits = 0; + + if (mask & N_DATA_READY) + intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high); + if (mask & N_OUTPUT_LOWAT) + intrbits |= hooks->intr_tx_explicit; + if (mask & N_DDCD) { + intrbits |= hooks->intr_delta_dcd; + sscrbits |= IOC4_SSCR_RX_RING_DCD; + } + if (mask & N_DCTS) + intrbits |= hooks->intr_delta_cts; + + if (set_on) { + enable_intrs(port, intrbits); + port->ip_notify |= mask; + port->ip_sscr |= sscrbits; + } else { + disable_intrs(port, intrbits); + port->ip_notify &= ~mask; + port->ip_sscr &= ~sscrbits; + } + + /* We require DMA if either DATA_READY or DDCD notification is + * currently requested. If neither of these is requested and + * there is currently no tx in progress, DMA may be disabled. + */ + if (port->ip_notify & (N_DATA_READY | N_DDCD)) + port->ip_sscr |= IOC4_SSCR_DMA_EN; + else if (!(port->ip_ienb & hooks->intr_tx_mt)) + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + return 0; +} + +/** + * set_mcr - set the master control reg + * @the_port: port to use + * @set: set ? + * @mask1: mcr mask + * @mask2: shadow mask + */ +static inline int set_mcr(struct uart_port *the_port, int set, + int mask1, int mask2) +{ + struct ioc4_port *port = get_ioc4_port(the_port); + uint32_t shadow; + int spiniter = 0; + char mcr; + + if (!port) + return -1; + + /* Pause the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE, + &port->ip_serial_regs->sscr); + while ((readl(&port->ip_serial_regs->sscr) + & IOC4_SSCR_PAUSE_STATE) == 0) { + spiniter++; + if (spiniter > MAXITER) + return -1; + } + } + shadow = readl(&port->ip_serial_regs->shadow); + mcr = (shadow & 0xff000000) >> 24; + + /* Set new value */ + if (set) { + mcr |= mask1; + shadow |= mask2; + } else { + mcr &= ~mask1; + shadow &= ~mask2; + } + writeb(mcr, &port->ip_uart_regs->i4u_mcr); + writel(shadow, &port->ip_serial_regs->shadow); + + /* Re-enable the DMA interface if necessary */ + if (port->ip_sscr & IOC4_SSCR_DMA_EN) { + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + return 0; +} + +/** + * ioc4_set_proto - set the protocol for the port + * @port: port to use + * @proto: protocol to use + */ +static int ioc4_set_proto(struct ioc4_port *port, enum sio_proto proto) +{ + struct hooks *hooks = port->ip_hooks; + + switch (proto) { + case PROTO_RS232: + /* Clear the appropriate GIO pin */ + writel(0, (&port->ip_mem->gppr_0 + + hooks->rs422_select_pin)); + break; + + case PROTO_RS422: + /* Set the appropriate GIO pin */ + writel(1, (&port->ip_mem->gppr_0 + + hooks->rs422_select_pin)); + break; + + default: + return 1; + } + return 0; +} + +/** + * transmit_chars - upper level write, called with ip_lock + * @the_port: port to write + */ +static void transmit_chars(struct uart_port *the_port) +{ + int xmit_count, tail, head; + int result; + char *start; + struct tty_struct *tty; + struct ioc4_port *port = get_ioc4_port(the_port); + struct uart_info *info; + + if (!the_port) + return; + if (!port) + return; + + info = the_port->info; + tty = info->tty; + + if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) { + /* Nothing to do or hw stopped */ + set_notification(port, N_ALL_OUTPUT, 0); + return; + } + + head = info->xmit.head; + tail = info->xmit.tail; + start = (char *)&info->xmit.buf[tail]; + + /* write out all the data or until the end of the buffer */ + xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail); + if (xmit_count > 0) { + result = do_write(port, start, xmit_count); + if (result > 0) { + /* booking */ + xmit_count -= result; + the_port->icount.tx += result; + /* advance the pointers */ + tail += result; + tail &= UART_XMIT_SIZE - 1; + info->xmit.tail = tail; + start = (char *)&info->xmit.buf[tail]; + } + } + if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS) + uart_write_wakeup(the_port); + + if (uart_circ_empty(&info->xmit)) { + set_notification(port, N_OUTPUT_LOWAT, 0); + } else { + set_notification(port, N_OUTPUT_LOWAT, 1); + } +} + +/** + * ioc4_change_speed - change the speed of the port + * @the_port: port to change + * @new_termios: new termios settings + * @old_termios: old termios settings + */ +static void +ioc4_change_speed(struct uart_port *the_port, + struct termios *new_termios, struct termios *old_termios) +{ + struct ioc4_port *port = get_ioc4_port(the_port); + int baud, bits; + unsigned cflag, cval; + int new_parity = 0, new_parity_enable = 0, new_stop = 1, new_data = 8; + struct uart_info *info = the_port->info; + + cflag = new_termios->c_cflag; + + switch (cflag & CSIZE) { + case CS5: + new_data = 5; + cval = 0x00; + bits = 7; + break; + case CS6: + new_data = 6; + cval = 0x01; + bits = 8; + break; + case CS7: + new_data = 7; + cval = 0x02; + bits = 9; + break; + case CS8: + new_data = 8; + cval = 0x03; + bits = 10; + break; + default: + /* cuz we always need a default ... */ + new_data = 5; + cval = 0x00; + bits = 7; + break; + } + if (cflag & CSTOPB) { + cval |= 0x04; + bits++; + new_stop = 1; + } + if (cflag & PARENB) { + cval |= UART_LCR_PARITY; + bits++; + new_parity_enable = 1; + } + if (cflag & PARODD) { + cval |= UART_LCR_EPAR; + new_parity = 1; + } + if (cflag & IGNPAR) { + cval &= ~UART_LCR_PARITY; + new_parity_enable = 0; + } + baud = uart_get_baud_rate(the_port, new_termios, old_termios, + MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED); + DPRINT_CONFIG(("%s: returned baud %d\n", __FUNCTION__, baud)); + + /* default is 9600 */ + if (!baud) + baud = 9600; + + if (!the_port->fifosize) + the_port->fifosize = IOC4_MAX_CHARS; + the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10)); + the_port->timeout += HZ / 50; /* Add .02 seconds of slop */ + + the_port->ignore_status_mask = N_ALL_INPUT; + + if (I_IGNPAR(info->tty)) + the_port->ignore_status_mask &= ~(N_PARITY_ERROR + | N_FRAMING_ERROR); + if (I_IGNBRK(info->tty)) { + the_port->ignore_status_mask &= ~N_BREAK; + if (I_IGNPAR(info->tty)) + the_port->ignore_status_mask &= ~N_OVERRUN_ERROR; + } + if (!(cflag & CREAD)) { + /* ignore everything */ + the_port->ignore_status_mask &= ~N_DATA_READY; + } + + if (cflag & CRTSCTS) + info->flags |= ASYNC_CTS_FLOW; + else + info->flags &= ~ASYNC_CTS_FLOW; + + /* Set the configuration and proper notification call */ + DPRINT_CONFIG(("%s : port 0x%p cflag 0%o " + "config_port(baud %d data %d stop %d p enable %d parity %d)," + " notification 0x%x\n", + __FUNCTION__, (void *)port, cflag, baud, new_data, new_stop, + new_parity_enable, new_parity, the_port->ignore_status_mask)); + + if ((config_port(port, baud, /* baud */ + new_data, /* byte size */ + new_stop, /* stop bits */ + new_parity_enable, /* set parity */ + new_parity)) >= 0) { /* parity 1==odd */ + set_notification(port, the_port->ignore_status_mask, 1); + } +} + +/** + * ic4_startup_local - Start up the serial port - returns >= 0 if no errors + * @the_port: Port to operate on + */ +static inline int ic4_startup_local(struct uart_port *the_port) +{ + int retval = 0; + struct ioc4_port *port; + struct uart_info *info; + + if (!the_port) + return -1; + + port = get_ioc4_port(the_port); + if (!port) + return -1; + + info = the_port->info; + if (info->flags & UIF_INITIALIZED) { + return retval; + } + + if (info->tty) { + set_bit(TTY_IO_ERROR, &info->tty->flags); + clear_bit(TTY_IO_ERROR, &info->tty->flags); + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->tty->alt_speed = 57600; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->tty->alt_speed = 115200; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->tty->alt_speed = 230400; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->tty->alt_speed = 460800; + } + local_open(port); + + /* set the speed of the serial port */ + ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0); + + /* enable hardware flow control - after ioc4_change_speed because + * ASYNC_CTS_FLOW is set there */ + if (info->flags & ASYNC_CTS_FLOW) { + port->ip_sscr |= IOC4_SSCR_HFC_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + info->flags |= UIF_INITIALIZED; + return 0; +} + +/* + * ioc4_cb_output_lowat - called when the output low water mark is hit + * @port: port to output + */ +static void ioc4_cb_output_lowat(struct ioc4_port *port) +{ + /* ip_lock is set on the call here */ + if (port->ip_port) { + transmit_chars(port->ip_port); + } +} + + +/** + * handle_intr - service any interrupts for the given port - 2nd level + * called via sd_intr + * @arg: handler arg + * @sio_ir: ioc4regs + */ +static void handle_intr(void *arg, uint32_t sio_ir) +{ + struct ioc4_port *port = (struct ioc4_port *)arg; + struct hooks *hooks = port->ip_hooks; + unsigned int rx_high_rd_aborted = 0; + unsigned int flags; + struct uart_port *the_port; + int loop_counter; + + /* Possible race condition here: The tx_mt interrupt bit may be + * cleared without the intervention of the interrupt handler, + * e.g. by a write. If the top level interrupt handler reads a + * tx_mt, then some other processor does a write, starting up + * output, then we come in here, see the tx_mt and stop DMA, the + * output started by the other processor will hang. Thus we can + * only rely on tx_mt being legitimate if it is read while the + * port lock is held. Therefore this bit must be ignored in the + * passed in interrupt mask which was read by the top level + * interrupt handler since the port lock was not held at the time + * it was read. We can only rely on this bit being accurate if it + * is read while the port lock is held. So we'll clear it for now, + * and reload it later once we have the port lock. + */ + sio_ir &= ~(hooks->intr_tx_mt); + + spin_lock_irqsave(&port->ip_lock, flags); + + loop_counter = MAXITER; /* to avoid hangs */ + + do { + uint32_t shadow; + + if ( loop_counter-- <= 0 ) { + printk(KERN_WARNING "IOC4 serial: " + "possible hang condition/" + "port stuck on interrupt.\n"); + break; + } + + /* Handle a DCD change */ + if (sio_ir & hooks->intr_delta_dcd) { + /* ACK the interrupt */ + writel(hooks->intr_delta_dcd, + &port->ip_mem->sio_ir); + + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DDCD) + && (shadow & IOC4_SHADOW_DCD) + && (port->ip_port)) { + the_port = port->ip_port; + the_port->icount.dcd = 1; + wake_up_interruptible + (&the_port-> info->delta_msr_wait); + } else if ((port->ip_notify & N_DDCD) + && !(shadow & IOC4_SHADOW_DCD)) { + /* Flag delta DCD/no DCD */ + port->ip_flags |= DCD_ON; + } + } + + /* Handle a CTS change */ + if (sio_ir & hooks->intr_delta_cts) { + /* ACK the interrupt */ + writel(hooks->intr_delta_cts, + &port->ip_mem->sio_ir); + + shadow = readl(&port->ip_serial_regs->shadow); + + if ((port->ip_notify & N_DCTS) + && (port->ip_port)) { + the_port = port->ip_port; + the_port->icount.cts = + (shadow & IOC4_SHADOW_CTS) ? 1 : 0; + wake_up_interruptible + (&the_port->info->delta_msr_wait); + } + } + + /* rx timeout interrupt. Must be some data available. Put this + * before the check for rx_high since servicing this condition + * may cause that condition to clear. + */ + if (sio_ir & hooks->intr_rx_timer) { + /* ACK the interrupt */ + writel(hooks->intr_rx_timer, + &port->ip_mem->sio_ir); + + if ((port->ip_notify & N_DATA_READY) + && (port->ip_port)) { + /* ip_lock is set on call here */ + receive_chars(port->ip_port); + } + } + + /* rx high interrupt. Must be after rx_timer. */ + else if (sio_ir & hooks->intr_rx_high) { + /* Data available, notify upper layer */ + if ((port->ip_notify & N_DATA_READY) + && port->ip_port) { + /* ip_lock is set on call here */ + receive_chars(port->ip_port); + } + + /* We can't ACK this interrupt. If receive_chars didn't + * cause the condition to clear, we'll have to disable + * the interrupt until the data is drained. + * If the read was aborted, don't disable the interrupt + * as this may cause us to hang indefinitely. An + * aborted read generally means that this interrupt + * hasn't been delivered to the cpu yet anyway, even + * though we see it as asserted when we read the sio_ir. + */ + if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) { + if ((port->ip_flags & READ_ABORTED) == 0) { + port->ip_ienb &= ~hooks->intr_rx_high; + port->ip_flags |= INPUT_HIGH; + } else { + rx_high_rd_aborted++; + } + } + } + + /* We got a low water interrupt: notify upper layer to + * send more data. Must come before tx_mt since servicing + * this condition may cause that condition to clear. + */ + if (sio_ir & hooks->intr_tx_explicit) { + port->ip_flags &= ~LOWAT_WRITTEN; + + /* ACK the interrupt */ + writel(hooks->intr_tx_explicit, + &port->ip_mem->sio_ir); + + if (port->ip_notify & N_OUTPUT_LOWAT) + ioc4_cb_output_lowat(port); + } + + /* Handle tx_mt. Must come after tx_explicit. */ + else if (sio_ir & hooks->intr_tx_mt) { + /* If we are expecting a lowat notification + * and we get to this point it probably means that for + * some reason the tx_explicit didn't work as expected + * (that can legitimately happen if the output buffer is + * filled up in just the right way). + * So send the notification now. + */ + if (port->ip_notify & N_OUTPUT_LOWAT) { + ioc4_cb_output_lowat(port); + + /* We need to reload the sio_ir since the lowat + * call may have caused another write to occur, + * clearing the tx_mt condition. + */ + sio_ir = PENDING(port); + } + + /* If the tx_mt condition still persists even after the + * lowat call, we've got some work to do. + */ + if (sio_ir & hooks->intr_tx_mt) { + + /* If we are not currently expecting DMA input, + * and the transmitter has just gone idle, + * there is no longer any reason for DMA, so + * disable it. + */ + if (!(port->ip_notify + & (N_DATA_READY | N_DDCD))) { + BUG_ON(!(port->ip_sscr + & IOC4_SSCR_DMA_EN)); + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, + &port->ip_serial_regs->sscr); + } + + /* Prevent infinite tx_mt interrupt */ + port->ip_ienb &= ~hooks->intr_tx_mt; + } + } + sio_ir = PENDING(port); + + /* if the read was aborted and only hooks->intr_rx_high, + * clear hooks->intr_rx_high, so we do not loop forever. + */ + + if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) { + sio_ir &= ~hooks->intr_rx_high; + } + } while (sio_ir & hooks->intr_all); + + spin_unlock_irqrestore(&port->ip_lock, flags); + + /* Re-enable interrupts before returning from interrupt handler. + * Getting interrupted here is okay. It'll just v() our semaphore, and + * we'll come through the loop again. + */ + + write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES, + IOC4_SIO_INTR_TYPE); +} + +/* + * ioc4_cb_post_ncs - called for some basic errors + * @port: port to use + * @ncs: event + */ +static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs) +{ + struct uart_icount *icount; + + icount = &the_port->icount; + + if (ncs & NCS_BREAK) + icount->brk++; + if (ncs & NCS_FRAMING) + icount->frame++; + if (ncs & NCS_OVERRUN) + icount->overrun++; + if (ncs & NCS_PARITY) + icount->parity++; +} + +/** + * do_read - Read in bytes from the port. Return the number of bytes + * actually read. + * @the_port: port to use + * @buf: place to put the stuff we read + * @len: how big 'buf' is + */ + +static inline int do_read(struct uart_port *the_port, unsigned char *buf, + int len) +{ + int prod_ptr, cons_ptr, total; + struct ioc4_port *port = get_ioc4_port(the_port); + struct ring *inring; + struct ring_entry *entry; + struct hooks *hooks = port->ip_hooks; + int byte_num; + char *sc; + int loop_counter; + + BUG_ON(!(len >= 0)); + BUG_ON(!port); + + /* There is a nasty timing issue in the IOC4. When the rx_timer + * expires or the rx_high condition arises, we take an interrupt. + * At some point while servicing the interrupt, we read bytes from + * the ring buffer and re-arm the rx_timer. However the rx_timer is + * not started until the first byte is received *after* it is armed, + * and any bytes pending in the rx construction buffers are not drained + * to memory until either there are 4 bytes available or the rx_timer + * expires. This leads to a potential situation where data is left + * in the construction buffers forever - 1 to 3 bytes were received + * after the interrupt was generated but before the rx_timer was + * re-armed. At that point as long as no subsequent bytes are received + * the timer will never be started and the bytes will remain in the + * construction buffer forever. The solution is to execute a DRAIN + * command after rearming the timer. This way any bytes received before + * the DRAIN will be drained to memory, and any bytes received after + * the DRAIN will start the TIMER and be drained when it expires. + * Luckily, this only needs to be done when the DMA buffer is empty + * since there is no requirement that this function return all + * available data as long as it returns some. + */ + /* Re-arm the timer */ + writel(port->ip_rx_cons | IOC4_SRCIR_ARM, + &port->ip_serial_regs->srcir); + + prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK; + cons_ptr = port->ip_rx_cons; + + if (prod_ptr == cons_ptr) { + int reset_dma = 0; + + /* Input buffer appears empty, do a flush. */ + + /* DMA must be enabled for this to work. */ + if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) { + port->ip_sscr |= IOC4_SSCR_DMA_EN; + reset_dma = 1; + } + + /* Potential race condition: we must reload the srpir after + * issuing the drain command, otherwise we could think the rx + * buffer is empty, then take a very long interrupt, and when + * we come back it's full and we wait forever for the drain to + * complete. + */ + writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN, + &port->ip_serial_regs->sscr); + prod_ptr = readl(&port->ip_serial_regs->srpir) + & PROD_CONS_MASK; + + /* We must not wait for the DRAIN to complete unless there are + * at least 8 bytes (2 ring entries) available to receive the + * data otherwise the DRAIN will never complete and we'll + * deadlock here. + * In fact, to make things easier, I'll just ignore the flush if + * there is any data at all now available. + */ + if (prod_ptr == cons_ptr) { + loop_counter = 0; + while (readl(&port->ip_serial_regs->sscr) & + IOC4_SSCR_RX_DRAIN) { + loop_counter++; + if (loop_counter > MAXITER) + return -1; + } + + /* SIGH. We have to reload the prod_ptr *again* since + * the drain may have caused it to change + */ + prod_ptr = readl(&port->ip_serial_regs->srpir) + & PROD_CONS_MASK; + } + if (reset_dma) { + port->ip_sscr &= ~IOC4_SSCR_DMA_EN; + writel(port->ip_sscr, &port->ip_serial_regs->sscr); + } + } + inring = port->ip_inring; + port->ip_flags &= ~READ_ABORTED; + + total = 0; + loop_counter = 0xfffff; /* to avoid hangs */ + + /* Grab bytes from the hardware */ + while ((prod_ptr != cons_ptr) && (len > 0)) { + entry = (struct ring_entry *)((caddr_t)inring + cons_ptr); + + if ( loop_counter-- <= 0 ) { + printk(KERN_WARNING "IOC4 serial: " + "possible hang condition/" + "port stuck on read.\n"); + break; + } + + /* According to the producer pointer, this ring entry + * must contain some data. But if the PIO happened faster + * than the DMA, the data may not be available yet, so let's + * wait until it arrives. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + /* Indicate the read is aborted so we don't disable + * the interrupt thinking that the consumer is + * congested. + */ + port->ip_flags |= READ_ABORTED; + len = 0; + break; + } + + /* Load the bytes/status out of the ring entry */ + for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) { + sc = &(entry->ring_sc[byte_num]); + + /* Check for change in modem state or overrun */ + if ((*sc & IOC4_RXSB_MODEM_VALID) + && (port->ip_notify & N_DDCD)) { + /* Notify upper layer if DCD dropped */ + + if ((port->ip_flags & DCD_ON) + && !(*sc & IOC4_RXSB_DCD)) { + + /* If we have already copied some data, + * return it. We'll pick up the carrier + * drop on the next pass. That way we + * don't throw away the data that has + * already been copied back to + * the caller's buffer. + */ + if (total > 0) { + len = 0; + break; + } + port->ip_flags &= ~DCD_ON; + + /* Turn off this notification so the + * carrier drop protocol won't see it + * again when it does a read. + */ + *sc &= ~IOC4_RXSB_MODEM_VALID; + + /* To keep things consistent, we need + * to update the consumer pointer so + * the next reader won't come in and + * try to read the same ring entries + * again. This must be done here before + * the dcd change. + */ + + if ((entry->ring_allsc & RING_ANY_VALID) + == 0) { + cons_ptr += (int)sizeof + (struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + writel(cons_ptr, + &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* Notify upper layer of carrier drop */ + if ((port->ip_notify & N_DDCD) + && port->ip_port) { + the_port->icount.dcd = 0; + wake_up_interruptible + (&the_port->info-> + delta_msr_wait); + } + + /* If we had any data to return, we + * would have returned it above. + */ + return 0; + } + } + if (*sc & IOC4_RXSB_MODEM_VALID) { + /* Notify that an input overrun occurred */ + if ((*sc & IOC4_RXSB_OVERRUN) + && (port->ip_notify & N_OVERRUN_ERROR)) { + ioc4_cb_post_ncs(the_port, NCS_OVERRUN); + } + /* Don't look at this byte again */ + *sc &= ~IOC4_RXSB_MODEM_VALID; + } + + /* Check for valid data or RX errors */ + if ((*sc & IOC4_RXSB_DATA_VALID) && + ((*sc & (IOC4_RXSB_PAR_ERR + | IOC4_RXSB_FRAME_ERR + | IOC4_RXSB_BREAK)) + && (port->ip_notify & (N_PARITY_ERROR + | N_FRAMING_ERROR + | N_BREAK)))) { + /* There is an error condition on the next byte. + * If we have already transferred some bytes, + * we'll stop here. Otherwise if this is the + * first byte to be read, we'll just transfer + * it alone after notifying the + * upper layer of its status. + */ + if (total > 0) { + len = 0; + break; + } else { + if ((*sc & IOC4_RXSB_PAR_ERR) && + (port->ip_notify & N_PARITY_ERROR)) { + ioc4_cb_post_ncs(the_port, + NCS_PARITY); + } + if ((*sc & IOC4_RXSB_FRAME_ERR) && + (port->ip_notify & N_FRAMING_ERROR)){ + ioc4_cb_post_ncs(the_port, + NCS_FRAMING); + } + if ((*sc & IOC4_RXSB_BREAK) + && (port->ip_notify & N_BREAK)) { + ioc4_cb_post_ncs + (the_port, + NCS_BREAK); + } + len = 1; + } + } + if (*sc & IOC4_RXSB_DATA_VALID) { + *sc &= ~IOC4_RXSB_DATA_VALID; + *buf = entry->ring_data[byte_num]; + buf++; + len--; + total++; + } + } + + /* If we used up this entry entirely, go on to the next one, + * otherwise we must have run out of buffer space, so + * leave the consumer pointer here for the next read in case + * there are still unread bytes in this entry. + */ + if ((entry->ring_allsc & RING_ANY_VALID) == 0) { + cons_ptr += (int)sizeof(struct ring_entry); + cons_ptr &= PROD_CONS_MASK; + } + } + + /* Update consumer pointer and re-arm rx timer interrupt */ + writel(cons_ptr, &port->ip_serial_regs->srcir); + port->ip_rx_cons = cons_ptr; + + /* If we have now dipped below the rx high water mark and we have + * rx_high interrupt turned off, we can now turn it back on again. + */ + if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr) + & PROD_CONS_MASK) < ((port->ip_sscr & + IOC4_SSCR_RX_THRESHOLD) + << IOC4_PROD_CONS_PTR_OFF))) { + port->ip_flags &= ~INPUT_HIGH; + enable_intrs(port, hooks->intr_rx_high); + } + return total; +} +/** + * receive_chars - upper level read. Called with ip_lock. + * @the_port: port to read from + */ +static void receive_chars(struct uart_port *the_port) +{ + struct tty_struct *tty; + unsigned char ch[IOC4_MAX_CHARS]; + int read_count, request_count; + struct uart_icount *icount; + struct uart_info *info = the_port->info; + + /* Make sure all the pointers are "good" ones */ + if (!info) + return; + if (!info->tty) + return; + + tty = info->tty; + + request_count = TTY_FLIPBUF_SIZE - tty->flip.count - 1; + + if (request_count > 0) { + if (request_count > IOC4_MAX_CHARS - 2) + request_count = IOC4_MAX_CHARS - 2; + icount = &the_port->icount; + read_count = do_read(the_port, ch, request_count); + if (read_count > 0) { + memcpy(tty->flip.char_buf_ptr, ch, read_count); + memset(tty->flip.flag_buf_ptr, TTY_NORMAL, read_count); + tty->flip.char_buf_ptr += read_count; + tty->flip.flag_buf_ptr += read_count; + tty->flip.count += read_count; + icount->rx += read_count; + } + } + tty_flip_buffer_push(tty); +} + +/** + * ic4_type - What type of console are we? + * @port: Port to operate with (we ignore since we only have one port) + * + */ +static const char *ic4_type(struct uart_port *the_port) +{ + return "SGI IOC4 Serial"; +} + +/** + * ic4_tx_empty - Is the transmitter empty? We pretend we're always empty + * @port: Port to operate on (we ignore since we always return 1) + * + */ +static unsigned int ic4_tx_empty(struct uart_port *the_port) +{ + return 1; +} + +/** + * ic4_stop_tx - stop the transmitter + * @port: Port to operate on + * @tty_stop: Set to 1 if called via uart_stop + * + */ +static void ic4_stop_tx(struct uart_port *the_port, unsigned int tty_stop) +{ +} + +/** + * null_void_function - + * @port: Port to operate on + * + */ +static void null_void_function(struct uart_port *the_port) +{ +} + +/** + * ic4_shutdown - shut down the port - free irq and disable + * @port: Port to shut down + * + */ +static void ic4_shutdown(struct uart_port *the_port) +{ + unsigned long port_flags; + struct ioc4_port *port; + struct uart_info *info; + + port = get_ioc4_port(the_port); + if (!port) + return; + + info = the_port->info; + + if (!(info->flags & UIF_INITIALIZED)) + return; + + wake_up_interruptible(&info->delta_msr_wait); + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + spin_lock_irqsave(&port->ip_lock, port_flags); + set_notification(port, N_ALL, 0); + info->flags &= ~UIF_INITIALIZED; + spin_unlock_irqrestore(&port->ip_lock, port_flags); +} + +/** + * ic4_set_mctrl - set control lines (dtr, rts, etc) + * @port: Port to operate on + * @mctrl: Lines to set/unset + * + */ +static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl) +{ + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + set_mcr(the_port, 1, mcr, IOC4_SHADOW_DTR); +} + +/** + * ic4_get_mctrl - get control line info + * @port: port to operate on + * + */ +static unsigned int ic4_get_mctrl(struct uart_port *the_port) +{ + struct ioc4_port *port = get_ioc4_port(the_port); + uint32_t shadow; + unsigned int ret = 0; + + if (!port) + return 0; + + shadow = readl(&port->ip_serial_regs->shadow); + if (shadow & IOC4_SHADOW_DCD) + ret |= TIOCM_CAR; + if (shadow & IOC4_SHADOW_DR) + ret |= TIOCM_DSR; + if (shadow & IOC4_SHADOW_CTS) + ret |= TIOCM_CTS; + return ret; +} + +/** + * ic4_start_tx - Start transmitter, flush any output + * @port: Port to operate on + * @tty_stop: Set to 1 if called via uart_start + * + */ +static void ic4_start_tx(struct uart_port *the_port, unsigned int tty_stop) +{ + struct ioc4_port *port = get_ioc4_port(the_port); + unsigned long flags; + + if (port) { + spin_lock_irqsave(&port->ip_lock, flags); + transmit_chars(the_port); + spin_unlock_irqrestore(&port->ip_lock, flags); + } +} + +/** + * ic4_break_ctl - handle breaks + * @port: Port to operate on + * @break_state: Break state + * + */ +static void ic4_break_ctl(struct uart_port *the_port, int break_state) +{ +} + +/** + * ic4_startup - Start up the serial port - always return 0 (We're always on) + * @port: Port to operate on + * + */ +static int ic4_startup(struct uart_port *the_port) +{ + int retval; + struct ioc4_port *port; + struct ioc4_control *control; + struct uart_info *info; + unsigned long port_flags; + + if (!the_port) { + return -ENODEV; + } + port = get_ioc4_port(the_port); + if (!port) { + return -ENODEV; + } + info = the_port->info; + + control = port->ip_control; + if (!control) { + return -ENODEV; + } + + /* Start up the serial port */ + spin_lock_irqsave(&port->ip_lock, port_flags); + retval = ic4_startup_local(the_port); + spin_unlock_irqrestore(&port->ip_lock, port_flags); + return retval; +} + +/** + * ic4_set_termios - set termios stuff + * @port: port to operate on + * @termios: New settings + * @termios: Old + * + */ +static void +ic4_set_termios(struct uart_port *the_port, + struct termios *termios, struct termios *old_termios) +{ + struct ioc4_port *port = get_ioc4_port(the_port); + unsigned long port_flags; + + spin_lock_irqsave(&port->ip_lock, port_flags); + ioc4_change_speed(the_port, termios, old_termios); + spin_unlock_irqrestore(&port->ip_lock, port_flags); +} + +/** + * ic4_request_port - allocate resources for port - no op.... + * @port: port to operate on + * + */ +static int ic4_request_port(struct uart_port *port) +{ + return 0; +} + +/* Associate the uart functions above - given to serial core */ + +static struct uart_ops ioc4_ops = { + .tx_empty = ic4_tx_empty, + .set_mctrl = ic4_set_mctrl, + .get_mctrl = ic4_get_mctrl, + .stop_tx = ic4_stop_tx, + .start_tx = ic4_start_tx, + .stop_rx = null_void_function, + .enable_ms = null_void_function, + .break_ctl = ic4_break_ctl, + .startup = ic4_startup, + .shutdown = ic4_shutdown, + .set_termios = ic4_set_termios, + .type = ic4_type, + .release_port = null_void_function, + .request_port = ic4_request_port, +}; + +/* + * Boot-time initialization code + */ + +static struct uart_driver ioc4_uart = { + .owner = THIS_MODULE, + .driver_name = "ioc4_serial", + .dev_name = DEVICE_NAME, + .major = DEVICE_MAJOR, + .minor = DEVICE_MINOR, + .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS, +}; + +/** + * ioc4_serial_core_attach - register with serial core + * This is done during pci probing + * @pdev: handle for this card + */ +static inline int +ioc4_serial_core_attach(struct pci_dev *pdev) +{ + struct ioc4_port *port; + struct uart_port *the_port; + struct ioc4_control *control = pci_get_drvdata(pdev); + int ii; + + DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n", + __FUNCTION__, pdev, (void *)control)); + + if (!control) + return -ENODEV; + + /* once around for each port on this card */ + for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) { + the_port = &control->ic_port[ii].icp_uart_port; + port = control->ic_port[ii].icp_port; + port->ip_port = the_port; + + DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p\n", + __FUNCTION__, (void *)the_port, + (void *)port)); + + spin_lock_init(&the_port->lock); + /* membase, iobase and mapbase just need to be non-0 */ + the_port->membase = (unsigned char __iomem *)1; + the_port->line = the_port->iobase = ii; + the_port->mapbase = 1; + the_port->type = PORT_16550A; + the_port->fifosize = IOC4_MAX_CHARS; + the_port->ops = &ioc4_ops; + the_port->irq = control->ic_irq; + the_port->dev = &pdev->dev; + if (uart_add_one_port(&ioc4_uart, the_port) < 0) { + printk(KERN_WARNING + "%s: unable to add port %d\n", + __FUNCTION__, the_port->line); + } else { + DPRINT_CONFIG( + ("IOC4 serial driver port %d irq = %d\n", + the_port->line, the_port->irq)); + } + /* all ports are rs232 for now */ + ioc4_set_proto(port, PROTO_RS232); + } + return 0; +} + +/** + * ioc4_serial_attach_one - register attach function + * called per card found from ioc4_serial_detect as part + * of module_init(). + * @pdev: handle for this card + * @pci_id: pci id for this card + */ +int +ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + struct ioc4_mem __iomem *mem; + unsigned long tmp_addr, tmp_addr1; + struct ioc4_serial __iomem *serial; + struct ioc4_soft *soft; + struct ioc4_control *control; + int tmp, ret = 0; + + + DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, pdev, pci_id)); + + /* Map in the ioc4 memory */ + tmp_addr = pci_resource_start(pdev, 0); + if (!tmp_addr) { + printk(KERN_WARNING + "ioc4 (%p) : unable to get PIO mapping for " + "MEM space\n", (void *)pdev); + return -ENODEV; + } + if (!request_region(tmp_addr, sizeof(struct ioc4_mem), "sioc4_mem")) { + printk(KERN_ALERT + "ioc4 (%p): unable to get request region for " + "MEM space\n", (void *)pdev); + return -ENODEV; + } + mem = ioremap(tmp_addr, sizeof(struct ioc4_mem)); + if (!mem) { + printk(KERN_WARNING + "ioc4 (%p) : unable to remap ioc4 memory\n", + (void *)pdev); + ret = -ENODEV; + goto out1; + } + + /* request serial registers */ + tmp_addr1 = pci_resource_start(pdev, 0) + IOC4_SERIAL_OFFSET; + + if (!request_region(tmp_addr1, sizeof(struct ioc4_serial), + "sioc4_uart")) { + printk(KERN_WARNING + "ioc4 (%p): unable to get request region for " + "uart space\n", (void *)pdev); + ret = -ENODEV; + goto out1; + } + serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial)); + if (!serial) { + printk(KERN_WARNING + "ioc4 (%p) : unable to remap ioc4 serial register\n", + (void *)pdev); + ret = -ENODEV; + goto out2; + } + DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n", + __FUNCTION__, (void *)mem, (void *)serial)); + + /* Get memory for the new card */ + control = kmalloc(sizeof(struct ioc4_control) * IOC4_NUM_SERIAL_PORTS, + GFP_KERNEL); + + if (!control) { + printk(KERN_WARNING "ioc4_attach_one" + ": unable to get memory for the IOC4\n"); + ret = -ENOMEM; + goto out2; + } + memset(control, 0, sizeof(struct ioc4_control)); + pci_set_drvdata(pdev, control); + + /* Allocate the soft structure */ + soft = kmalloc(sizeof(struct ioc4_soft), GFP_KERNEL); + if (!soft) { + printk(KERN_WARNING + "ioc4 (%p): unable to get memory for the soft struct\n", + (void *)pdev); + ret = -ENOMEM; + goto out3; + } + memset(soft, 0, sizeof(struct ioc4_soft)); + + spin_lock_init(&soft->is_ir_lock); + soft->is_ioc4_mem_addr = mem; + soft->is_ioc4_serial_addr = serial; + + /* Init the IOC4 */ + pci_read_config_dword(pdev, PCI_COMMAND, &tmp); + pci_write_config_dword(pdev, PCI_COMMAND, + tmp | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); + + writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, &mem->sio_cr); + + /* Enable serial port mode select generic PIO pins as outputs */ + writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL + | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL, + &mem->gpcr_s); + + /* Clear and disable all interrupts */ + write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE); + writel(~0, &mem->sio_ir); + write_ireg(soft, ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR), + IOC4_W_IEC, IOC4_OTHER_INTR_TYPE); + writel(~(IOC4_OTHER_IR_ATA_MEMERR | IOC4_OTHER_IR_ATA_MEMERR), + &mem->other_ir); + control->ic_soft = soft; + if (!request_irq(pdev->irq, ioc4_intr, SA_SHIRQ, + "sgi-ioc4serial", (void *)soft)) { + control->ic_irq = pdev->irq; + } else { + printk(KERN_WARNING + "%s : request_irq fails for IRQ 0x%x\n ", + __FUNCTION__, pdev->irq); + } + if ((ret = ioc4_attach_local(pdev, control, soft, + soft->is_ioc4_mem_addr, + soft->is_ioc4_serial_addr))) + goto out4; + + /* register port with the serial core */ + + if ((ret = ioc4_serial_core_attach(pdev))) + goto out4; + + return ret; + + /* error exits that give back resources */ +out4: + kfree(soft); +out3: + kfree(control); +out2: + release_region(tmp_addr1, sizeof(struct ioc4_serial)); +out1: + release_region(tmp_addr, sizeof(struct ioc4_mem)); + + return ret; +} + + +/** + * ioc4_serial_remove_one - detach function + * + * @pdev: handle for this card + */ + +#if 0 +void ioc4_serial_remove_one(struct pci_dev *pdev) +{ + int ii; + struct ioc4_control *control; + struct uart_port *the_port; + struct ioc4_port *port; + struct ioc4_soft *soft; + + control = pci_get_drvdata(pdev); + + for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) { + the_port = &control->ic_port[ii].icp_uart_port; + if (the_port) { + uart_remove_one_port(&ioc4_uart, the_port); + } + port = control->ic_port[ii].icp_port; + if (!(ii & 1) && port) { + pci_free_consistent(port->ip_pdev, + TOTAL_RING_BUF_SIZE, + (void *)port->ip_cpu_ringbuf, + port->ip_dma_ringbuf); + kfree(port); + } + } + soft = control->ic_soft; + if (soft) { + free_irq(control->ic_irq, (void *)soft); + if (soft->is_ioc4_serial_addr) { + release_region((unsigned long) + soft->is_ioc4_serial_addr, + sizeof(struct ioc4_serial)); + } + kfree(soft); + } + kfree(control); + pci_set_drvdata(pdev, NULL); + uart_unregister_driver(&ioc4_uart); +} +#endif + +/** + * ioc4_serial_init - module init + */ +int ioc4_serial_init(void) +{ + int ret; + + /* register with serial core */ + if ((ret = uart_register_driver(&ioc4_uart)) < 0) { + printk(KERN_WARNING + "%s: Couldn't register IOC4 serial driver\n", + __FUNCTION__); + return ret; + } + return 0; +} + +MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); +MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(ioc4_serial_init); +EXPORT_SYMBOL(ioc4_serial_attach_one); diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c new file mode 100644 index 000000000000..3ea46c069f6f --- /dev/null +++ b/drivers/serial/ip22zilog.c @@ -0,0 +1,1271 @@ +/* + * Driver for Zilog serial chips found on SGI workstations and + * servers. This driver could actually be made more generic. + * + * This is based on the drivers/serial/sunzilog.c code as of 2.6.0-test7 and the + * old drivers/sgi/char/sgiserial.c code which itself is based of the original + * drivers/sbus/char/zs.c code. A lot of code has been simply moved over + * directly from there but much has been rewritten. Credits therefore go out + * to David S. Miller, Eddie C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell + * for their work there. + * + * Copyright (C) 2002 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_SERIAL_IP22_ZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "ip22zilog.h" + +void ip22_do_break(void); + +/* + * On IP22 we need to delay after register accesses but we do not need to + * flush writes. + */ +#define ZSDELAY() udelay(5) +#define ZSDELAY_LONG() udelay(20) +#define ZS_WSYNC(channel) do { } while (0) + +#define NUM_IP22ZILOG 1 +#define NUM_CHANNELS (NUM_IP22ZILOG * 2) + +#define ZS_CLOCK 3672000 /* Zilog input clock rate. */ +#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_ip22zilog_port { + struct uart_port port; + + /* IRQ servicing chain. */ + struct uart_ip22zilog_port *next; + + /* Current values of Zilog write registers. */ + unsigned char curregs[NUM_ZSREGS]; + + unsigned int flags; +#define IP22ZILOG_FLAG_IS_CONS 0x00000004 +#define IP22ZILOG_FLAG_IS_KGDB 0x00000008 +#define IP22ZILOG_FLAG_MODEM_STATUS 0x00000010 +#define IP22ZILOG_FLAG_IS_CHANNEL_A 0x00000020 +#define IP22ZILOG_FLAG_REGS_HELD 0x00000040 +#define IP22ZILOG_FLAG_TX_STOPPED 0x00000080 +#define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100 + + unsigned int cflag; + + /* L1-A keyboard break state. */ + int kbd_id; + int l1_down; + + unsigned char parity_mask; + unsigned char prev_status; +}; + +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel *)((PORT)->membase)) +#define UART_ZILOG(PORT) ((struct uart_ip22zilog_port *)(PORT)) +#define IP22ZILOG_GET_CURR_REG(PORT, REGNUM) \ + (UART_ZILOG(PORT)->curregs[REGNUM]) +#define IP22ZILOG_SET_CURR_REG(PORT, REGNUM, REGVAL) \ + ((UART_ZILOG(PORT)->curregs[REGNUM]) = (REGVAL)) +#define ZS_IS_CONS(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_KGDB) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & IP22ZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & IP22ZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_ACTIVE) + +/* Reading and writing Zilog8530 registers. The delays are to make this + * driver work on the IP22 which needs a settling delay after each chip + * register access, other machines handle this in hardware via auxiliary + * flip-flops which implement the settle time we do in software. + * + * The port lock must be held and local IRQs must be disabled + * when {read,write}_zsreg is invoked. + */ +static unsigned char read_zsreg(struct zilog_channel *channel, + unsigned char reg) +{ + unsigned char retval; + + writeb(reg, &channel->control); + ZSDELAY(); + retval = readb(&channel->control); + ZSDELAY(); + + return retval; +} + +static void write_zsreg(struct zilog_channel *channel, + unsigned char reg, unsigned char value) +{ + writeb(reg, &channel->control); + ZSDELAY(); + writeb(value, &channel->control); + ZSDELAY(); +} + +static void ip22zilog_clear_fifo(struct zilog_channel *channel) +{ + int i; + + for (i = 0; i < 32; i++) { + unsigned char regval; + + regval = readb(&channel->control); + ZSDELAY(); + if (regval & Rx_CH_AV) + break; + + regval = read_zsreg(channel, R1); + readb(&channel->data); + ZSDELAY(); + + if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + } +} + +/* This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs) +{ + int i; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + ip22zilog_clear_fifo(channel); + + /* Disable all interrupts. */ + write_zsreg(channel, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(channel, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(channel, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(channel, R3, regs[R3] & ~RxENAB); + write_zsreg(channel, R5, regs[R5] & ~TxENAB); + + /* Synchronous mode config. */ + write_zsreg(channel, R6, regs[R6]); + write_zsreg(channel, R7, regs[R7]); + + /* Don't mess with the interrupt vector (R2, unused by us) and + * master interrupt control (R9). We make sure this is setup + * properly at probe time then never touch it again. + */ + + /* Disable baud generator. */ + write_zsreg(channel, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(channel, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(channel, R12, regs[R12]); + write_zsreg(channel, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(channel, R14, regs[R14]); + + /* External status interrupt control. */ + write_zsreg(channel, R15, regs[R15]); + + /* Reset external status interrupts. */ + write_zsreg(channel, R0, RES_EXT_INT); + write_zsreg(channel, R0, RES_EXT_INT); + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(channel, R3, regs[R3]); + write_zsreg(channel, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(channel, R1, regs[R1]); +} + +/* Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + if (!ZS_REGS_HELD(up)) { + if (ZS_TX_ACTIVE(up)) { + up->flags |= IP22ZILOG_FLAG_REGS_HELD; + } else { + __load_zsregs(channel, up->curregs); + } + } +} + +static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up, + struct zilog_channel *channel, + struct pt_regs *regs) +{ + struct tty_struct *tty = up->port.info->tty; /* XXX info==NULL? */ + + while (1) { + unsigned char ch, r1; + + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + tty->flip.work.func((void *)tty); + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + return; /* XXX Ignores SysRq when we need it most. Fix. */ + } + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + + if (ZS_IS_CONS(up) && (r1 & BRK_ABRT)) { + /* Wait for BREAK to deassert to avoid potentially + * confusing the PROM. + */ + while (1) { + ch = readb(&channel->control); + ZSDELAY(); + if (!(ch & BRK_ABRT)) + break; + } + ip22_do_break(); + return; + } + + /* A real serial line, record the character and status. */ + *tty->flip.char_buf_ptr = ch; + *tty->flip.flag_buf_ptr = TTY_NORMAL; + up->port.icount.rx++; + if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) { + if (r1 & BRK_ABRT) { + r1 &= ~(PAR_ERR | CRC_ERR); + up->port.icount.brk++; + if (uart_handle_break(&up->port)) + goto next_char; + } + else if (r1 & PAR_ERR) + up->port.icount.parity++; + else if (r1 & CRC_ERR) + up->port.icount.frame++; + if (r1 & Rx_OVR) + up->port.icount.overrun++; + r1 &= up->port.read_status_mask; + if (r1 & BRK_ABRT) + *tty->flip.flag_buf_ptr = TTY_BREAK; + else if (r1 & PAR_ERR) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (r1 & CRC_ERR) + *tty->flip.flag_buf_ptr = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch, regs)) + goto next_char; + + if (up->port.ignore_status_mask == 0xff || + (r1 & up->port.ignore_status_mask) == 0) { + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + if ((r1 & Rx_OVR) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + next_char: + ch = readb(&channel->control); + ZSDELAY(); + if (!(ch & Rx_CH_AV)) + break; + } + + tty_flip_buffer_push(tty); +} + +static void ip22zilog_status_handle(struct uart_ip22zilog_port *up, + struct zilog_channel *channel, + struct pt_regs *regs) +{ + unsigned char status; + + status = readb(&channel->control); + ZSDELAY(); + + writeb(RES_EXT_INT, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (ZS_WANTS_MODEM_STATUS(up)) { + if (status & SYNC) + up->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + */ + if ((status & DCD) ^ up->prev_status) + uart_handle_dcd_change(&up->port, + (status & DCD)); + if ((status & CTS) ^ up->prev_status) + uart_handle_cts_change(&up->port, + (status & CTS)); + + wake_up_interruptible(&up->port.info->delta_msr_wait); + } + + up->prev_status = status; +} + +static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up, + struct zilog_channel *channel) +{ + struct circ_buf *xmit; + + if (ZS_IS_CONS(up)) { + unsigned char status = readb(&channel->control); + ZSDELAY(); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becomming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + up->flags &= ~IP22ZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(up)) { + __load_zsregs(channel, up->curregs); + up->flags &= ~IP22ZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(up)) { + up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + if (up->port.x_char) { + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + writeb(up->port.x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + + if (up->port.info == NULL) + goto ack_tx_int; + xmit = &up->port.info->xmit; + if (uart_circ_empty(xmit)) { + uart_write_wakeup(&up->port); + goto ack_tx_int; + } + if (uart_tx_stopped(&up->port)) + goto ack_tx_int; + + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return; + +ack_tx_int: + writeb(RES_Tx_P, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_ip22zilog_port *up = dev_id; + + while (up) { + struct zilog_channel *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + unsigned char r3; + + spin_lock(&up->port.lock); + r3 = read_zsreg(channel, R3); + + /* Channel A */ + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHARxIP) + ip22zilog_receive_chars(up, channel, regs); + if (r3 & CHAEXT) + ip22zilog_status_handle(up, channel, regs); + if (r3 & CHATxIP) + ip22zilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + /* Channel B */ + up = up->next; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock(&up->port.lock); + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHBRxIP) + ip22zilog_receive_chars(up, channel, regs); + if (r3 & CHBEXT) + ip22zilog_status_handle(up, channel, regs); + if (r3 & CHBTxIP) + ip22zilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + up = up->next; + } + + return IRQ_HANDLED; +} + +/* A convenient way to quickly get R0 status. The caller must _not_ hold the + * port lock, it is acquired here. + */ +static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port) +{ + struct zilog_channel *channel; + unsigned long flags; + unsigned char status; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + status = readb(&channel->control); + ZSDELAY(); + + spin_unlock_irqrestore(&port->lock, flags); + + return status; +} + +/* The port lock is not held. */ +static unsigned int ip22zilog_tx_empty(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = ip22zilog_read_channel_status(port); + if (status & Tx_BUF_EMP) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* The port lock is not held. */ +static unsigned int ip22zilog_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = ip22zilog_read_channel_status(port); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC) + ret |= TIOCM_DSR; + if (status & CTS) + ret |= TIOCM_CTS; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits; + + set_bits = clear_bits = 0; + + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + up->curregs[R5] |= set_bits; + up->curregs[R5] &= ~clear_bits; + write_zsreg(channel, R5, up->curregs[R5]); +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + + up->flags |= IP22ZILOG_FLAG_TX_STOPPED; +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char status; + + up->flags |= IP22ZILOG_FLAG_TX_ACTIVE; + up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED; + + status = readb(&channel->control); + ZSDELAY(); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + writeb(port->x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->info->xmit; + + writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + } +} + +/* The port lock is held and interrupts are disabled. */ +static void ip22zilog_stop_rx(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + struct zilog_channel *channel; + + if (ZS_IS_CONS(up)) + return; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable all RX interrupts. */ + up->curregs[R1] &= ~RxINT_MASK; + ip22zilog_maybe_update_regs(up, channel); +} + +/* The port lock is held. */ +static void ip22zilog_enable_ms(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char new_reg; + + new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != up->curregs[R15]) { + up->curregs[R15] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R15, up->curregs[R15]); + } +} + +/* The port lock is not held. */ +static void ip22zilog_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != up->curregs[R5]) { + up->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R5, up->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __ip22zilog_startup(struct uart_ip22zilog_port *up) +{ + struct zilog_channel *channel; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->prev_status = readb(&channel->control); + + /* Enable receiver and transmitter. */ + up->curregs[R3] |= RxENAB; + up->curregs[R5] |= TxENAB; + + up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + ip22zilog_maybe_update_regs(up, channel); +} + +static int ip22zilog_startup(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + unsigned long flags; + + if (ZS_IS_CONS(up)) + return 0; + + spin_lock_irqsave(&port->lock, flags); + __ip22zilog_startup(up); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +/* + * The test for ZS_IS_CONS is explained by the following e-mail: + ***** + * From: Russell King + * Date: Sun, 8 Dec 2002 10:18:38 +0000 + * + * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: + * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, + * > and I noticed that something is not right with reference + * > counting in this case. It seems that when the console + * > is open by kernel initially, this is not accounted + * > as an open, and uart_startup is not called. + * + * That is correct. We are unable to call uart_startup when the serial + * console is initialised because it may need to allocate memory (as + * request_irq does) and the memory allocators may not have been + * initialised. + * + * 1. initialise the port into a state where it can send characters in the + * console write method. + * + * 2. don't do the actual hardware shutdown in your shutdown() method (but + * do the normal software shutdown - ie, free irqs etc) + ***** + */ +static void ip22zilog_shutdown(struct uart_port *port) +{ + struct uart_ip22zilog_port *up = UART_ZILOG(port); + struct zilog_channel *channel; + unsigned long flags; + + if (ZS_IS_CONS(up)) + return; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable receiver and transmitter. */ + up->curregs[R3] &= ~RxENAB; + up->curregs[R5] &= ~TxENAB; + + /* Disable all interrupts and BRK assertion. */ + up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + up->curregs[R5] &= ~SND_BRK; + ip22zilog_maybe_update_regs(up, channel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void +ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag, + unsigned int iflag, int brg) +{ + + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + + /* Program BAUD and clock source. */ + up->curregs[R4] &= ~XCLK_MASK; + up->curregs[R4] |= X16CLK; + up->curregs[R12] = brg & 0xff; + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRENAB; + + /* Character size, stop bits, and parity. */ + up->curregs[3] &= ~RxN_MASK; + up->curregs[5] &= ~TxN_MASK; + switch (cflag & CSIZE) { + case CS5: + up->curregs[3] |= Rx5; + up->curregs[5] |= Tx5; + up->parity_mask = 0x1f; + break; + case CS6: + up->curregs[3] |= Rx6; + up->curregs[5] |= Tx6; + up->parity_mask = 0x3f; + break; + case CS7: + up->curregs[3] |= Rx7; + up->curregs[5] |= Tx7; + up->parity_mask = 0x7f; + break; + case CS8: + default: + up->curregs[3] |= Rx8; + up->curregs[5] |= Tx8; + up->parity_mask = 0xff; + break; + }; + up->curregs[4] &= ~0x0c; + if (cflag & CSTOPB) + up->curregs[4] |= SB2; + else + up->curregs[4] |= SB1; + if (cflag & PARENB) + up->curregs[4] |= PAR_ENAB; + else + up->curregs[4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + up->curregs[4] |= PAR_EVEN; + else + up->curregs[4] &= ~PAR_EVEN; + + up->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + up->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= BRK_ABRT; + + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask = 0xff; +} + +/* The port lock is not held. */ +static void +ip22zilog_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port; + unsigned long flags; + int baud, brg; + + baud = uart_get_baud_rate(port, termios, old, 1200, 76800); + + spin_lock_irqsave(&up->port.lock, flags); + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + ip22zilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); + + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->flags |= IP22ZILOG_FLAG_MODEM_STATUS; + else + up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS; + + up->cflag = termios->c_cflag; + + ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *ip22zilog_type(struct uart_port *port) +{ + return "IP22-Zilog"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void ip22zilog_release_port(struct uart_port *port) +{ +} + +static int ip22zilog_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void ip22zilog_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int ip22zilog_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops ip22zilog_pops = { + .tx_empty = ip22zilog_tx_empty, + .set_mctrl = ip22zilog_set_mctrl, + .get_mctrl = ip22zilog_get_mctrl, + .stop_tx = ip22zilog_stop_tx, + .start_tx = ip22zilog_start_tx, + .stop_rx = ip22zilog_stop_rx, + .enable_ms = ip22zilog_enable_ms, + .break_ctl = ip22zilog_break_ctl, + .startup = ip22zilog_startup, + .shutdown = ip22zilog_shutdown, + .set_termios = ip22zilog_set_termios, + .type = ip22zilog_type, + .release_port = ip22zilog_release_port, + .request_port = ip22zilog_request_port, + .config_port = ip22zilog_config_port, + .verify_port = ip22zilog_verify_port, +}; + +static struct uart_ip22zilog_port *ip22zilog_port_table; +static struct zilog_layout **ip22zilog_chip_regs; + +static struct uart_ip22zilog_port *ip22zilog_irq_chain; +static int zilog_irq = -1; + +static void * __init alloc_one_table(unsigned long size) +{ + void *ret; + + ret = kmalloc(size, GFP_KERNEL); + if (ret != NULL) + memset(ret, 0, size); + + return ret; +} + +static void __init ip22zilog_alloc_tables(void) +{ + ip22zilog_port_table = (struct uart_ip22zilog_port *) + alloc_one_table(NUM_CHANNELS * sizeof(struct uart_ip22zilog_port)); + ip22zilog_chip_regs = (struct zilog_layout **) + alloc_one_table(NUM_IP22ZILOG * sizeof(struct zilog_layout *)); + + if (ip22zilog_port_table == NULL || ip22zilog_chip_regs == NULL) { + panic("IP22-Zilog: Cannot allocate IP22-Zilog tables."); + } +} + +/* Get the address of the registers for IP22-Zilog instance CHIP. */ +static struct zilog_layout * __init get_zs(int chip) +{ + unsigned long base; + + if (chip < 0 || chip >= NUM_IP22ZILOG) { + panic("IP22-Zilog: Illegal chip number %d in get_zs.", chip); + } + + /* Not probe-able, hard code it. */ + base = (unsigned long) &sgioc->uart; + + zilog_irq = SGI_SERIAL_IRQ; + request_mem_region(base, 8, "IP22-Zilog"); + + return (struct zilog_layout *) base; +} + +#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ + +#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE +static void ip22zilog_put_char(struct zilog_channel *channel, unsigned char ch) +{ + int loops = ZS_PUT_CHAR_MAX_DELAY; + + /* This is a timed polling loop so do not switch the explicit + * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM + */ + do { + unsigned char val = readb(&channel->control); + if (val & Tx_BUF_EMP) { + ZSDELAY(); + break; + } + udelay(5); + } while (--loops); + + writeb(ch, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static void +ip22zilog_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + unsigned long flags; + int i; + + spin_lock_irqsave(&up->port.lock, flags); + for (i = 0; i < count; i++, s++) { + ip22zilog_put_char(channel, *s); + if (*s == 10) + ip22zilog_put_char(channel, 13); + } + udelay(2); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +void +ip22serial_console_termios(struct console *con, char *options) +{ + int baud = 9600, bits = 8, cflag; + int parity = 'n'; + int flow = 'n'; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + cflag = CREAD | HUPCL | CLOCAL; + + switch (baud) { + case 150: cflag |= B150; break; + case 300: cflag |= B300; break; + case 600: cflag |= B600; break; + case 1200: cflag |= B1200; break; + case 2400: cflag |= B2400; break; + case 4800: cflag |= B4800; break; + case 9600: cflag |= B9600; break; + case 19200: cflag |= B19200; break; + case 38400: cflag |= B38400; break; + default: baud = 9600; cflag |= B9600; break; + } + + con->cflag = cflag | CS8; /* 8N1 */ +} + +static int __init ip22zilog_console_setup(struct console *con, char *options) +{ + struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index]; + unsigned long flags; + int baud, brg; + + printk("Console: ttyS%d (IP22-Zilog)\n", con->index); + + /* Get firmware console settings. */ + ip22serial_console_termios(con, options); + + /* Firmware console speed is limited to 150-->38400 baud so + * this hackish cflag thing is OK. + */ + switch (con->cflag & CBAUD) { + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + default: case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + }; + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + spin_lock_irqsave(&up->port.lock, flags); + + up->curregs[R15] = BRKIE; + ip22zilog_convert_to_zs(up, con->cflag, 0, brg); + + __ip22zilog_startup(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static struct uart_driver ip22zilog_reg; + +static struct console ip22zilog_console = { + .name = "ttyS", + .write = ip22zilog_console_write, + .device = uart_console_device, + .setup = ip22zilog_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &ip22zilog_reg, +}; +#endif /* CONFIG_SERIAL_IP22_ZILOG_CONSOLE */ + +static struct uart_driver ip22zilog_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = NUM_CHANNELS, +#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE + .cons = &ip22zilog_console, +#endif +}; + +static void __init ip22zilog_prepare(void) +{ + struct uart_ip22zilog_port *up; + struct zilog_layout *rp; + int channel, chip; + + /* + * Temporary fix. + */ + for (channel = 0; channel < NUM_CHANNELS; channel++) + spin_lock_init(&ip22zilog_port_table[channel].port.lock); + + ip22zilog_irq_chain = &ip22zilog_port_table[NUM_CHANNELS - 1]; + up = &ip22zilog_port_table[0]; + for (channel = NUM_CHANNELS - 1 ; channel > 0; channel--) + up[channel].next = &up[channel - 1]; + up[channel].next = NULL; + + for (chip = 0; chip < NUM_IP22ZILOG; chip++) { + if (!ip22zilog_chip_regs[chip]) { + ip22zilog_chip_regs[chip] = rp = get_zs(chip); + + up[(chip * 2) + 0].port.membase = (char *) &rp->channelB; + up[(chip * 2) + 1].port.membase = (char *) &rp->channelA; + + /* In theory mapbase is the physical address ... */ + up[(chip * 2) + 0].port.mapbase = + (unsigned long) ioremap((unsigned long) &rp->channelB, 8); + up[(chip * 2) + 1].port.mapbase = + (unsigned long) ioremap((unsigned long) &rp->channelA, 8); + } + + /* Channel A */ + up[(chip * 2) + 0].port.iotype = UPIO_MEM; + up[(chip * 2) + 0].port.irq = zilog_irq; + up[(chip * 2) + 0].port.uartclk = ZS_CLOCK; + up[(chip * 2) + 0].port.fifosize = 1; + up[(chip * 2) + 0].port.ops = &ip22zilog_pops; + up[(chip * 2) + 0].port.type = PORT_IP22ZILOG; + up[(chip * 2) + 0].port.flags = 0; + up[(chip * 2) + 0].port.line = (chip * 2) + 0; + up[(chip * 2) + 0].flags = 0; + + /* Channel B */ + up[(chip * 2) + 1].port.iotype = UPIO_MEM; + up[(chip * 2) + 1].port.irq = zilog_irq; + up[(chip * 2) + 1].port.uartclk = ZS_CLOCK; + up[(chip * 2) + 1].port.fifosize = 1; + up[(chip * 2) + 1].port.ops = &ip22zilog_pops; + up[(chip * 2) + 1].port.type = PORT_IP22ZILOG; + up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A; + up[(chip * 2) + 1].port.line = (chip * 2) + 1; + up[(chip * 2) + 1].flags = 0; + } +} + +static void __init ip22zilog_init_hw(void) +{ + int i; + + for (i = 0; i < NUM_CHANNELS; i++) { + struct uart_ip22zilog_port *up = &ip22zilog_port_table[i]; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + unsigned long flags; + int baud, brg; + + spin_lock_irqsave(&up->port.lock, flags); + + if (ZS_IS_CHANNEL_A(up)) { + write_zsreg(channel, R9, FHWRES); + ZSDELAY_LONG(); + (void) read_zsreg(channel, R0); + } + + /* Normal serial TTY. */ + up->parity_mask = 0xff; + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R9] = NV | MIE; + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + baud = 9600; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRENAB; + __load_zsregs(channel, up->curregs); + /* set master interrupt enable */ + write_zsreg(channel, R9, up->curregs[R9]); + + spin_unlock_irqrestore(&up->port.lock, flags); + } +} + +static int __init ip22zilog_ports_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: IP22 Zilog driver (%d chips).\n", NUM_IP22ZILOG); + + ip22zilog_prepare(); + + if (request_irq(zilog_irq, ip22zilog_interrupt, 0, + "IP22-Zilog", ip22zilog_irq_chain)) { + panic("IP22-Zilog: Unable to register zs interrupt handler.\n"); + } + + ip22zilog_init_hw(); + + ret = uart_register_driver(&ip22zilog_reg); + if (ret == 0) { + int i; + + for (i = 0; i < NUM_CHANNELS; i++) { + struct uart_ip22zilog_port *up = &ip22zilog_port_table[i]; + + uart_add_one_port(&ip22zilog_reg, &up->port); + } + } + + return ret; +} + +static int __init ip22zilog_init(void) +{ + /* IP22 Zilog setup is hard coded, no probing to do. */ + ip22zilog_alloc_tables(); + ip22zilog_ports_init(); + + return 0; +} + +static void __exit ip22zilog_exit(void) +{ + int i; + + for (i = 0; i < NUM_CHANNELS; i++) { + struct uart_ip22zilog_port *up = &ip22zilog_port_table[i]; + + uart_remove_one_port(&ip22zilog_reg, &up->port); + } + + uart_unregister_driver(&ip22zilog_reg); +} + +module_init(ip22zilog_init); +module_exit(ip22zilog_exit); + +/* David wrote it but I'm to blame for the bugs ... */ +MODULE_AUTHOR("Ralf Baechle "); +MODULE_DESCRIPTION("SGI Zilog serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/ip22zilog.h b/drivers/serial/ip22zilog.h new file mode 100644 index 000000000000..a59a9a8341d2 --- /dev/null +++ b/drivers/serial/ip22zilog.h @@ -0,0 +1,281 @@ +#ifndef _IP22_ZILOG_H +#define _IP22_ZILOG_H + +#include + +struct zilog_channel { +#ifdef __BIG_ENDIAN + volatile unsigned char unused0[3]; + volatile unsigned char control; + volatile unsigned char unused1[3]; + volatile unsigned char data; +#else /* __LITTLE_ENDIAN */ + volatile unsigned char control; + volatile unsigned char unused0[3]; + volatile unsigned char data; + volatile unsigned char unused1[3]; +#endif +}; + +struct zilog_layout { + struct zilog_channel channelB; + struct zilog_channel channelA; +}; + +#define NUM_ZSREGS 16 + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENAB 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define ZCIE 2 /* Zero count IE */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x0e + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(channel) do { writeb(ERR_RES, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARSTAT(channel) do { writeb(RES_EXT_INT, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARFIFO(channel) do { readb(&channel->data); \ + udelay(2); \ + readb(&channel->data); \ + udelay(2); \ + readb(&channel->data); \ + udelay(2); } while(0) + +#endif /* _IP22_ZILOG_H */ diff --git a/drivers/serial/jsm/Makefile b/drivers/serial/jsm/Makefile new file mode 100644 index 000000000000..e46b6e0f8b18 --- /dev/null +++ b/drivers/serial/jsm/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for Jasmine adapter +# + +obj-$(CONFIG_SERIAL_JSM) += jsm.o + +jsm-objs := jsm_driver.o jsm_neo.o jsm_tty.o + diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h new file mode 100644 index 000000000000..b12ee02a0f7c --- /dev/null +++ b/drivers/serial/jsm/jsm.h @@ -0,0 +1,437 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + ***********************************************************************/ + +#ifndef __JSM_DRIVER_H +#define __JSM_DRIVER_H + +#include +#include +#include /* To pick up the varions Linux types */ +#include +#include +#include + +/* + * Debugging levels can be set using debug insmod variable + * They can also be compiled out completely. + */ +enum { + DBG_INIT = 0x01, + DBG_BASIC = 0x02, + DBG_CORE = 0x04, + DBG_OPEN = 0x08, + DBG_CLOSE = 0x10, + DBG_READ = 0x20, + DBG_WRITE = 0x40, + DBG_IOCTL = 0x80, + DBG_PROC = 0x100, + DBG_PARAM = 0x200, + DBG_PSCAN = 0x400, + DBG_EVENT = 0x800, + DBG_DRAIN = 0x1000, + DBG_MSIGS = 0x2000, + DBG_MGMT = 0x4000, + DBG_INTR = 0x8000, + DBG_CARR = 0x10000, +}; + +#define jsm_printk(nlevel, klevel, pdev, fmt, args...) \ + if ((DBG_##nlevel & jsm_debug)) \ + dev_printk(KERN_##klevel, pdev->dev, fmt, ## args) + +#define MAXPORTS 8 +#define MAX_STOPS_SENT 5 + +/* Board type definitions */ + +#define T_NEO 0000 +#define T_CLASSIC 0001 +#define T_PCIBUS 0400 + +/* Board State Definitions */ + +#define BD_RUNNING 0x0 +#define BD_REASON 0x7f +#define BD_NOTFOUND 0x1 +#define BD_NOIOPORT 0x2 +#define BD_NOMEM 0x3 +#define BD_NOBIOS 0x4 +#define BD_NOFEP 0x5 +#define BD_FAILED 0x6 +#define BD_ALLOCATED 0x7 +#define BD_TRIBOOT 0x8 +#define BD_BADKME 0x80 + + +/* 4 extra for alignment play space */ +#define WRITEBUFLEN ((4096) + 4) +#define MYFLIPLEN N_TTY_BUF_SIZE + +#define JSM_VERSION "jsm: 1.1-1-INKERNEL" +#define JSM_PARTNUM "40002438_A-INKERNEL" + +/* + * All the possible states the driver can be while being loaded. + */ +enum { + DRIVER_INITIALIZED = 0, + DRIVER_READY +}; + +/* + * All the possible states the board can be while booting up. + */ +enum { + BOARD_FAILED = 0, + BOARD_FOUND, + BOARD_READY +}; + +struct board_id { + u8 *name; + u32 maxports; +}; + +struct jsm_board; +struct jsm_channel; + +/************************************************************************ + * Per board operations structure * + ************************************************************************/ +struct board_ops { + irqreturn_t (*intr) (int irq, void *voidbrd, struct pt_regs *regs); + void (*uart_init) (struct jsm_channel *ch); + void (*uart_off) (struct jsm_channel *ch); + void (*param) (struct jsm_channel *ch); + void (*assert_modem_signals) (struct jsm_channel *ch); + void (*flush_uart_write) (struct jsm_channel *ch); + void (*flush_uart_read) (struct jsm_channel *ch); + void (*disable_receiver) (struct jsm_channel *ch); + void (*enable_receiver) (struct jsm_channel *ch); + void (*send_break) (struct jsm_channel *ch); + void (*clear_break) (struct jsm_channel *ch, int); + void (*send_start_character) (struct jsm_channel *ch); + void (*send_stop_character) (struct jsm_channel *ch); + void (*copy_data_from_queue_to_uart) (struct jsm_channel *ch); + u32 (*get_uart_bytes_left) (struct jsm_channel *ch); + void (*send_immediate_char) (struct jsm_channel *ch, unsigned char); +}; + + +/* + * Per-board information + */ +struct jsm_board +{ + int boardnum; /* Board number: 0-32 */ + + int type; /* Type of board */ + char *name; /* Product Name */ + u8 rev; /* PCI revision ID */ + struct pci_dev *pci_dev; + u32 maxports; /* MAX ports this board can handle */ + + spinlock_t bd_lock; /* Used to protect board */ + + spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and + * the interrupt routine from each other. + */ + + u32 state; /* State of card. */ + wait_queue_head_t state_wait; /* Place to sleep on for state change */ + + u32 nasync; /* Number of ports on card */ + + u32 irq; /* Interrupt request number */ + u64 intr_count; /* Count of interrupts */ + + u64 membase; /* Start of base memory of the card */ + u64 membase_end; /* End of base memory of the card */ + + u8 __iomem *re_map_membase;/* Remapped memory of the card */ + + u64 iobase; /* Start of io base of the card */ + u64 iobase_end; /* End of io base of the card */ + + u32 bd_uart_offset; /* Space between each UART */ + + struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */ + char *flipbuf; /* Our flip buffer, alloced if board is found */ + + u16 dpatype; /* The board "type", as defined by DPA */ + u16 dpastatus; /* The board "status", as defined by DPA */ + + u32 bd_dividend; /* Board/UARTs specific dividend */ + + struct board_ops *bd_ops; + + struct list_head jsm_board_entry; +}; + +/************************************************************************ + * Device flag definitions for ch_flags. + ************************************************************************/ +#define CH_PRON 0x0001 /* Printer on string */ +#define CH_STOP 0x0002 /* Output is stopped */ +#define CH_STOPI 0x0004 /* Input is stopped */ +#define CH_CD 0x0008 /* Carrier is present */ +#define CH_FCAR 0x0010 /* Carrier forced on */ +#define CH_HANGUP 0x0020 /* Hangup received */ + +#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */ +#define CH_OPENING 0x0080 /* Port in fragile open state */ +#define CH_CLOSING 0x0100 /* Port in fragile close state */ +#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */ +#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */ +#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */ +#define CH_BREAK_SENDING 0x1000 /* Break is being sent */ +#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */ +#define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */ +#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */ + +/* Our Read/Error/Write queue sizes */ +#define RQUEUEMASK 0x1FFF /* 8 K - 1 */ +#define EQUEUEMASK 0x1FFF /* 8 K - 1 */ +#define WQUEUEMASK 0x0FFF /* 4 K - 1 */ +#define RQUEUESIZE (RQUEUEMASK + 1) +#define EQUEUESIZE RQUEUESIZE +#define WQUEUESIZE (WQUEUEMASK + 1) + + +/************************************************************************ + * Channel information structure. + ************************************************************************/ +struct jsm_channel { + struct uart_port uart_port; + struct jsm_board *ch_bd; /* Board structure pointer */ + + spinlock_t ch_lock; /* provide for serialization */ + wait_queue_head_t ch_flags_wait; + + u32 ch_portnum; /* Port number, 0 offset. */ + u32 ch_open_count; /* open count */ + u32 ch_flags; /* Channel flags */ + + u64 ch_close_delay; /* How long we should drop RTS/DTR for */ + + u64 ch_cpstime; /* Time for CPS calculations */ + + tcflag_t ch_c_iflag; /* channel iflags */ + tcflag_t ch_c_cflag; /* channel cflags */ + tcflag_t ch_c_oflag; /* channel oflags */ + tcflag_t ch_c_lflag; /* channel lflags */ + u8 ch_stopc; /* Stop character */ + u8 ch_startc; /* Start character */ + + u32 ch_old_baud; /* Cache of the current baud */ + u32 ch_custom_speed;/* Custom baud, if set */ + + u32 ch_wopen; /* Waiting for open process cnt */ + + u8 ch_mostat; /* FEP output modem status */ + u8 ch_mistat; /* FEP input modem status */ + + struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */ + u8 ch_cached_lsr; /* Cached value of the LSR register */ + + u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */ + u16 ch_r_head; /* Head location of the read queue */ + u16 ch_r_tail; /* Tail location of the read queue */ + + u8 *ch_equeue; /* Our error queue buffer - malloc'ed */ + u16 ch_e_head; /* Head location of the error queue */ + u16 ch_e_tail; /* Tail location of the error queue */ + + u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */ + u16 ch_w_head; /* Head location of the write queue */ + u16 ch_w_tail; /* Tail location of the write queue */ + + u64 ch_rxcount; /* total of data received so far */ + u64 ch_txcount; /* total of data transmitted so far */ + + u8 ch_r_tlevel; /* Receive Trigger level */ + u8 ch_t_tlevel; /* Transmit Trigger level */ + + u8 ch_r_watermark; /* Receive Watermark */ + + + u32 ch_stops_sent; /* How many times I have sent a stop character + * to try to stop the other guy sending. + */ + u64 ch_err_parity; /* Count of parity errors on channel */ + u64 ch_err_frame; /* Count of framing errors on channel */ + u64 ch_err_break; /* Count of breaks on channel */ + u64 ch_err_overrun; /* Count of overruns on channel */ + + u64 ch_xon_sends; /* Count of xons transmitted */ + u64 ch_xoff_sends; /* Count of xoffs transmitted */ +}; + + +/************************************************************************ + * Per channel/port NEO UART structure * + ************************************************************************ + * Base Structure Entries Usage Meanings to Host * + * * + * W = read write R = read only * + * U = Unused. * + ************************************************************************/ + +struct neo_uart_struct { + u8 txrx; /* WR RHR/THR - Holding Reg */ + u8 ier; /* WR IER - Interrupt Enable Reg */ + u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */ + u8 lcr; /* WR LCR - Line Control Reg */ + u8 mcr; /* WR MCR - Modem Control Reg */ + u8 lsr; /* WR LSR - Line Status Reg */ + u8 msr; /* WR MSR - Modem Status Reg */ + u8 spr; /* WR SPR - Scratch Pad Reg */ + u8 fctr; /* WR FCTR - Feature Control Reg */ + u8 efr; /* WR EFR - Enhanced Function Reg */ + u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */ + u8 rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */ + u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */ + u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */ + u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */ + u8 xonchar2; /* WR XON 2 - XOn Character 2 Reg */ + + u8 reserved1[0x2ff - 0x200]; /* U Reserved by Exar */ + u8 txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */ + u8 reserved2[0x37f - 0x340]; /* U Reserved by Exar */ + u8 rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */ +}; + +/* Where to read the extended interrupt register (32bits instead of 8bits) */ +#define UART_17158_POLL_ADDR_OFFSET 0x80 + +/* + * These are the redefinitions for the FCTR on the XR17C158, since + * Exar made them different than their earlier design. (XR16C854) + */ + +/* These are only applicable when table D is selected */ +#define UART_17158_FCTR_RTS_NODELAY 0x00 +#define UART_17158_FCTR_RTS_4DELAY 0x01 +#define UART_17158_FCTR_RTS_6DELAY 0x02 +#define UART_17158_FCTR_RTS_8DELAY 0x03 +#define UART_17158_FCTR_RTS_12DELAY 0x12 +#define UART_17158_FCTR_RTS_16DELAY 0x05 +#define UART_17158_FCTR_RTS_20DELAY 0x13 +#define UART_17158_FCTR_RTS_24DELAY 0x06 +#define UART_17158_FCTR_RTS_28DELAY 0x14 +#define UART_17158_FCTR_RTS_32DELAY 0x07 +#define UART_17158_FCTR_RTS_36DELAY 0x16 +#define UART_17158_FCTR_RTS_40DELAY 0x08 +#define UART_17158_FCTR_RTS_44DELAY 0x09 +#define UART_17158_FCTR_RTS_48DELAY 0x10 +#define UART_17158_FCTR_RTS_52DELAY 0x11 + +#define UART_17158_FCTR_RTS_IRDA 0x10 +#define UART_17158_FCTR_RS485 0x20 +#define UART_17158_FCTR_TRGA 0x00 +#define UART_17158_FCTR_TRGB 0x40 +#define UART_17158_FCTR_TRGC 0x80 +#define UART_17158_FCTR_TRGD 0xC0 + +/* 17158 trigger table selects.. */ +#define UART_17158_FCTR_BIT6 0x40 +#define UART_17158_FCTR_BIT7 0x80 + +/* 17158 TX/RX memmapped buffer offsets */ +#define UART_17158_RX_FIFOSIZE 64 +#define UART_17158_TX_FIFOSIZE 64 + +/* 17158 Extended IIR's */ +#define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */ +#define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */ +#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */ +#define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */ + +/* + * These are the extended interrupts that get sent + * back to us from the UART's 32bit interrupt register + */ +#define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */ +#define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */ +#define UART_17158_TXRDY 0x3 /* TX Ready */ +#define UART_17158_MSR 0x4 /* Modem State Change */ +#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */ +#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */ + +/* + * These are the EXTENDED definitions for the 17C158's Interrupt + * Enable Register. + */ +#define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */ +#define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */ +#define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */ +#define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */ +#define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */ + +#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */ +#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */ + +#define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */ +#define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */ +#define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */ +#define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */ + +#define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI" +#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator" +#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI" +#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator" + +/* + * Our Global Variables. + */ +extern struct uart_driver jsm_uart_driver; +extern struct board_ops jsm_neo_ops; +extern int jsm_debug; +extern int jsm_rawreadok; + +extern int jsm_driver_state; /* The state of the driver */ +extern char *jsm_driver_state_text[];/* Array of driver state text */ + +extern spinlock_t jsm_board_head_lock; +extern struct list_head jsm_board_head; + +/************************************************************************* + * + * Prototypes for non-static functions used in more than one module + * + *************************************************************************/ +int jsm_tty_write(struct uart_port *port); +int jsm_tty_init(struct jsm_board *); +int jsm_uart_port_init(struct jsm_board *); +int jsm_remove_uart_port(struct jsm_board *); +void jsm_input(struct jsm_channel *ch); +void jsm_carrier(struct jsm_channel *ch); +void jsm_check_queue_flow_control(struct jsm_channel *ch); + +void jsm_create_driver_sysfiles(struct device_driver *); +void jsm_remove_driver_sysfiles(struct device_driver *); + +#endif diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c new file mode 100644 index 000000000000..d4847d4f1473 --- /dev/null +++ b/drivers/serial/jsm/jsm_driver.c @@ -0,0 +1,404 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + ***********************************************************************/ +#include +#include + +#include "jsm.h" + +MODULE_AUTHOR("Digi International, http://www.digi.com"); +MODULE_DESCRIPTION("Driver for the Digi International Neo PCI based product line"); +MODULE_SUPPORTED_DEVICE("jsm"); + +#define JSM_DRIVER_NAME "jsm" +#define NR_PORTS 32 +#define JSM_MINOR_START 0 + +struct uart_driver jsm_uart_driver = { + .owner = THIS_MODULE, + .driver_name = JSM_DRIVER_NAME, + .dev_name = "ttyn", + .major = 253, + .minor = JSM_MINOR_START, + .nr = NR_PORTS, + .cons = NULL, +}; + +int jsm_debug; +int jsm_rawreadok; +module_param(jsm_debug, int, 0); +module_param(jsm_rawreadok, int, 0); +MODULE_PARM_DESC(jsm_debug, "Driver debugging level"); +MODULE_PARM_DESC(jsm_rawreadok, "Bypass flip buffers on input"); + +/* + * Globals + */ +int jsm_driver_state = DRIVER_INITIALIZED; +spinlock_t jsm_board_head_lock = SPIN_LOCK_UNLOCKED; +LIST_HEAD(jsm_board_head); + +static struct pci_device_id jsm_pci_tbl[] = { + { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 }, + { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 }, + { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, + { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, + { 0,} /* 0 terminated list. */ +}; +MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); + +static struct board_id jsm_Ids[] = { + { PCI_DEVICE_NEO_2DB9_PCI_NAME, 2 }, + { PCI_DEVICE_NEO_2DB9PRI_PCI_NAME, 2 }, + { PCI_DEVICE_NEO_2RJ45_PCI_NAME, 2 }, + { PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME, 2 }, + { NULL, 0 } +}; + +char *jsm_driver_state_text[] = { + "Driver Initialized", + "Driver Ready." +}; + +static int jsm_finalize_board_init(struct jsm_board *brd) +{ + int rc = 0; + + jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + + if (brd->irq) { + rc = request_irq(brd->irq, brd->bd_ops->intr, SA_INTERRUPT|SA_SHIRQ, "JSM", brd); + + if (rc) { + printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq); + brd->state = BOARD_FAILED; + brd->dpastatus = BD_NOFEP; + rc = -ENODEV; + } else + jsm_printk(INIT, INFO, &brd->pci_dev, + "Requested and received usage of IRQ %d\n", brd->irq); + } + return rc; +} + +/* + * jsm_found_board() + * + * A board has been found, init it. + */ +static int jsm_found_board(struct pci_dev *pdev, int id) +{ + struct jsm_board *brd; + int i = 0; + int rc = 0; + struct list_head *tmp; + struct jsm_board *cur_board_entry; + unsigned long lock_flags; + int adapter_count = 0; + int retval; + + brd = kmalloc(sizeof(struct jsm_board), GFP_KERNEL); + if (!brd) { + dev_err(&pdev->dev, "memory allocation for board structure failed\n"); + return -ENOMEM; + } + memset(brd, 0, sizeof(struct jsm_board)); + + spin_lock_irqsave(&jsm_board_head_lock, lock_flags); + list_for_each(tmp, &jsm_board_head) { + cur_board_entry = + list_entry(tmp, struct jsm_board, + jsm_board_entry); + if (cur_board_entry->boardnum != adapter_count) { + break; + } + adapter_count++; + } + + list_add_tail(&brd->jsm_board_entry, &jsm_board_head); + spin_unlock_irqrestore(&jsm_board_head_lock, lock_flags); + + /* store the info for the board we've found */ + brd->boardnum = adapter_count; + brd->pci_dev = pdev; + brd->name = jsm_Ids[id].name; + brd->maxports = jsm_Ids[id].maxports; + brd->dpastatus = BD_NOFEP; + init_waitqueue_head(&brd->state_wait); + + spin_lock_init(&brd->bd_lock); + spin_lock_init(&brd->bd_intr_lock); + + brd->state = BOARD_FOUND; + + for (i = 0; i < brd->maxports; i++) + brd->channels[i] = NULL; + + /* store which revision we have */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev); + + brd->irq = pdev->irq; + + switch(brd->pci_dev->device) { + + case PCI_DEVICE_ID_NEO_2DB9: + case PCI_DEVICE_ID_NEO_2DB9PRI: + case PCI_DEVICE_ID_NEO_2RJ45: + case PCI_DEVICE_ID_NEO_2RJ45PRI: + + /* + * This chip is set up 100% when we get to it. + * No need to enable global interrupts or anything. + */ + brd->dpatype = T_NEO | T_PCIBUS; + + jsm_printk(INIT, INFO, &brd->pci_dev, + "jsm_found_board - NEO adapter\n"); + + /* get the PCI Base Address Registers */ + brd->membase = pci_resource_start(pdev, 0); + brd->membase_end = pci_resource_end(pdev, 0); + + if (brd->membase & 1) + brd->membase &= ~3; + else + brd->membase &= ~15; + + /* Assign the board_ops struct */ + brd->bd_ops = &jsm_neo_ops; + + brd->bd_uart_offset = 0x200; + brd->bd_dividend = 921600; + + brd->re_map_membase = ioremap(brd->membase, 0x1000); + jsm_printk(INIT, INFO, &brd->pci_dev, + "remapped mem: 0x%p\n", brd->re_map_membase); + if (!brd->re_map_membase) { + kfree(brd); + dev_err(&pdev->dev, "card has no PCI Memory resources, failing board.\n"); + return -ENOMEM; + } + break; + + default: + dev_err(&pdev->dev, "Did not find any compatible Neo or Classic PCI boards in system.\n"); + kfree(brd); + return -ENXIO; + } + + /* + * Do tty device initialization. + */ + rc = jsm_finalize_board_init(brd); + if (rc < 0) { + dev_err(&pdev->dev, "Can't finalize board init (%d)\n", rc); + brd->state = BOARD_FAILED; + retval = -ENXIO; + goto failed0; + } + + rc = jsm_tty_init(brd); + if (rc < 0) { + dev_err(&pdev->dev, "Can't init tty devices (%d)\n", rc); + brd->state = BOARD_FAILED; + retval = -ENXIO; + goto failed1; + } + + rc = jsm_uart_port_init(brd); + if (rc < 0) { + dev_err(&pdev->dev, "Can't init uart port (%d)\n", rc); + brd->state = BOARD_FAILED; + retval = -ENXIO; + goto failed1; + } + + brd->state = BOARD_READY; + brd->dpastatus = BD_RUNNING; + + /* Log the information about the board */ + dev_info(&pdev->dev, "board %d: %s (rev %d), irq %d\n",adapter_count, brd->name, brd->rev, brd->irq); + + /* + * allocate flip buffer for board. + * + * Okay to malloc with GFP_KERNEL, we are not at interrupt + * context, and there are no locks held. + */ + brd->flipbuf = kmalloc(MYFLIPLEN, GFP_KERNEL); + if (!brd->flipbuf) { + dev_err(&pdev->dev, "memory allocation for flipbuf failed\n"); + brd->state = BOARD_FAILED; + retval = -ENOMEM; + goto failed1; + } + memset(brd->flipbuf, 0, MYFLIPLEN); + + jsm_create_driver_sysfiles(pdev->dev.driver); + + wake_up_interruptible(&brd->state_wait); + return 0; +failed1: + free_irq(brd->irq, brd); +failed0: + kfree(brd); + iounmap(brd->re_map_membase); + return retval; +} + +/* returns count (>= 0), or negative on error */ +static int jsm_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int rc; + + rc = pci_enable_device(pdev); + if (rc) { + dev_err(&pdev->dev, "Device enable FAILED\n"); + return rc; + } + + if ((rc = pci_request_regions(pdev, "jsm"))) { + dev_err(&pdev->dev, "pci_request_region FAILED\n"); + pci_disable_device(pdev); + return rc; + } + + if ((rc = jsm_found_board(pdev, ent->driver_data))) { + dev_err(&pdev->dev, "jsm_found_board FAILED\n"); + pci_release_regions(pdev); + pci_disable_device(pdev); + return rc; + } + return rc; +} + + +/* + * jsm_cleanup_board() + * + * Free all the memory associated with a board + */ +static void jsm_cleanup_board(struct jsm_board *brd) +{ + int i = 0; + + free_irq(brd->irq, brd); + iounmap(brd->re_map_membase); + + /* Free all allocated channels structs */ + for (i = 0; i < brd->maxports; i++) { + if (brd->channels[i]) { + if (brd->channels[i]->ch_rqueue) + kfree(brd->channels[i]->ch_rqueue); + if (brd->channels[i]->ch_equeue) + kfree(brd->channels[i]->ch_equeue); + if (brd->channels[i]->ch_wqueue) + kfree(brd->channels[i]->ch_wqueue); + kfree(brd->channels[i]); + } + } + + pci_release_regions(brd->pci_dev); + pci_disable_device(brd->pci_dev); + kfree(brd->flipbuf); + kfree(brd); +} + +static void jsm_remove_one(struct pci_dev *dev) +{ + unsigned long lock_flags; + struct list_head *tmp; + struct jsm_board *brd; + + spin_lock_irqsave(&jsm_board_head_lock, lock_flags); + list_for_each(tmp, &jsm_board_head) { + brd = list_entry(tmp, struct jsm_board, + jsm_board_entry); + if ( brd != NULL && brd->pci_dev == dev) { + jsm_remove_uart_port(brd); + jsm_cleanup_board(brd); + list_del(&brd->jsm_board_entry); + break; + } + } + spin_unlock_irqrestore(&jsm_board_head_lock, lock_flags); + return; +} + +struct pci_driver jsm_driver = { + .name = "jsm", + .probe = jsm_init_one, + .id_table = jsm_pci_tbl, + .remove = __devexit_p(jsm_remove_one), +}; + +/* + * jsm_init_module() + * + * Module load. This is where it all starts. + */ +static int __init jsm_init_module(void) +{ + int rc = 0; + + printk(KERN_INFO "%s, Digi International Part Number %s\n", + JSM_VERSION, JSM_VERSION); + + /* + * Initialize global stuff + */ + + rc = uart_register_driver(&jsm_uart_driver); + if (rc < 0) { + return rc; + } + + rc = pci_register_driver(&jsm_driver); + if (rc < 0) { + uart_unregister_driver(&jsm_uart_driver); + return rc; + } + jsm_driver_state = DRIVER_READY; + + return rc; +} + +module_init(jsm_init_module); + +/* + * jsm_exit_module() + * + * Module unload. This is where it all ends. + */ +static void __exit jsm_exit_module(void) +{ + jsm_remove_driver_sysfiles(&jsm_driver.driver); + + pci_unregister_driver(&jsm_driver); + + uart_unregister_driver(&jsm_uart_driver); +} +module_exit(jsm_exit_module); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c new file mode 100644 index 000000000000..9b79c1ff6c72 --- /dev/null +++ b/drivers/serial/jsm/jsm_neo.c @@ -0,0 +1,1427 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + ***********************************************************************/ +#include /* For udelay */ +#include /* For the various UART offsets */ +#include +#include +#include + +#include "jsm.h" /* Driver main header file */ + +static u32 jsm_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; + +/* + * This function allows calls to ensure that all outstanding + * PCI writes have been completed, by doing a PCI read against + * a non-destructive, read-only location on the Neo card. + * + * In this case, we are reading the DVID (Read-only Device Identification) + * value of the Neo card. + */ +static inline void neo_pci_posting_flush(struct jsm_board *bd) +{ + readb(bd->re_map_membase + 0x8D); +} + +static void neo_set_cts_flow_control(struct jsm_channel *ch) +{ + u8 ier = readb(&ch->ch_neo_uart->ier); + u8 efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n"); + + /* Turn on auto CTS flow control */ + ier |= (UART_17158_IER_CTSDSR); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_CTSDSR); + + /* Turn off auto Xon flow control */ + efr &= ~(UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); + + /* Feed the UART our trigger levels */ + writeb(8, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 8; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_rts_flow_control(struct jsm_channel *ch) +{ + u8 ier = readb(&ch->ch_neo_uart->ier); + u8 efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n"); + + /* Turn on auto RTS flow control */ + ier |= (UART_17158_IER_RTSDTR); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_RTSDTR); + + /* Turn off auto Xoff flow control */ + ier &= ~(UART_17158_IER_XOFF); + efr &= ~(UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr); + ch->ch_r_watermark = 4; + + writeb(56, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 56; + + writeb(ier, &ch->ch_neo_uart->ier); + + /* + * From the Neo UART spec sheet: + * The auto RTS/DTR function must be started by asserting + * RTS/DTR# output pin (MCR bit-0 or 1 to logic 1 after + * it is enabled. + */ + ch->ch_mostat |= (UART_MCR_RTS); +} + + +static void neo_set_ixon_flow_control(struct jsm_channel *ch) +{ + u8 ier = readb(&ch->ch_neo_uart->ier); + u8 efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n"); + + /* Turn off auto CTS flow control */ + ier &= ~(UART_17158_IER_CTSDSR); + efr &= ~(UART_17158_EFR_CTSDSR); + + /* Turn on auto Xon flow control */ + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + ch->ch_r_watermark = 4; + + writeb(32, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 32; + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_ixoff_flow_control(struct jsm_channel *ch) +{ + u8 ier = readb(&ch->ch_neo_uart->ier); + u8 efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n"); + + /* Turn off auto RTS flow control */ + ier &= ~(UART_17158_IER_RTSDTR); + efr &= ~(UART_17158_EFR_RTSDTR); + + /* Turn on auto Xoff flow control */ + ier |= (UART_17158_IER_XOFF); + efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + writeb(8, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 8; + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_no_input_flow_control(struct jsm_channel *ch) +{ + u8 ier = readb(&ch->ch_neo_uart->ier); + u8 efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n"); + + /* Turn off auto RTS flow control */ + ier &= ~(UART_17158_IER_RTSDTR); + efr &= ~(UART_17158_EFR_RTSDTR); + + /* Turn off auto Xoff flow control */ + ier &= ~(UART_17158_IER_XOFF); + if (ch->ch_c_iflag & IXON) + efr &= ~(UART_17158_EFR_IXOFF); + else + efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXOFF); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + ch->ch_r_watermark = 0; + + writeb(16, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 16; + + writeb(16, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 16; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static void neo_set_no_output_flow_control(struct jsm_channel *ch) +{ + u8 ier = readb(&ch->ch_neo_uart->ier); + u8 efr = readb(&ch->ch_neo_uart->efr); + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n"); + + /* Turn off auto CTS flow control */ + ier &= ~(UART_17158_IER_CTSDSR); + efr &= ~(UART_17158_EFR_CTSDSR); + + /* Turn off auto Xon flow control */ + if (ch->ch_c_iflag & IXOFF) + efr &= ~(UART_17158_EFR_IXON); + else + efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXON); + + /* Why? Becuz Exar's spec says we have to zero it out before setting it */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Turn on UART enhanced bits */ + writeb(efr, &ch->ch_neo_uart->efr); + + /* Turn on table D, with 8 char hi/low watermarks */ + writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr); + + ch->ch_r_watermark = 0; + + writeb(16, &ch->ch_neo_uart->tfifo); + ch->ch_t_tlevel = 16; + + writeb(16, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 16; + + writeb(ier, &ch->ch_neo_uart->ier); +} + +static inline void neo_set_new_start_stop_chars(struct jsm_channel *ch) +{ + + /* if hardware flow control is set, then skip this whole thing */ + if (ch->ch_c_cflag & CRTSCTS) + return; + + jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "start\n"); + + /* Tell UART what start/stop chars it should be looking for */ + writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1); + writeb(0, &ch->ch_neo_uart->xonchar2); + + writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1); + writeb(0, &ch->ch_neo_uart->xoffchar2); +} + +static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch) +{ + int qleft = 0; + u8 linestatus = 0; + u8 error_mask = 0; + int n = 0; + int total = 0; + u16 head; + u16 tail; + + if (!ch) + return; + + /* cache head and tail of queue */ + head = ch->ch_r_head & RQUEUEMASK; + tail = ch->ch_r_tail & RQUEUEMASK; + + /* Get our cached LSR */ + linestatus = ch->ch_cached_lsr; + ch->ch_cached_lsr = 0; + + /* Store how much space we have left in the queue */ + if ((qleft = tail - head - 1) < 0) + qleft += RQUEUEMASK + 1; + + /* + * If the UART is not in FIFO mode, force the FIFO copy to + * NOT be run, by setting total to 0. + * + * On the other hand, if the UART IS in FIFO mode, then ask + * the UART to give us an approximation of data it has RX'ed. + */ + if (!(ch->ch_flags & CH_FIFO_ENABLED)) + total = 0; + else { + total = readb(&ch->ch_neo_uart->rfifo); + + /* + * EXAR chip bug - RX FIFO COUNT - Fudge factor. + * + * This resolves a problem/bug with the Exar chip that sometimes + * returns a bogus value in the rfifo register. + * The count can be any where from 0-3 bytes "off". + * Bizarre, but true. + */ + total -= 3; + } + + /* + * Finally, bound the copy to make sure we don't overflow + * our own queue... + * The byte by byte copy loop below this loop this will + * deal with the queue overflow possibility. + */ + total = min(total, qleft); + + while (total > 0) { + /* + * Grab the linestatus register, we need to check + * to see if there are any errors in the FIFO. + */ + linestatus = readb(&ch->ch_neo_uart->lsr); + + /* + * Break out if there is a FIFO error somewhere. + * This will allow us to go byte by byte down below, + * finding the exact location of the error. + */ + if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) + break; + + /* Make sure we don't go over the end of our queue */ + n = min(((u32) total), (RQUEUESIZE - (u32) head)); + + /* + * Cut down n even further if needed, this is to fix + * a problem with memcpy_fromio() with the Neo on the + * IBM pSeries platform. + * 15 bytes max appears to be the magic number. + */ + n = min((u32) n, (u32) 12); + + /* + * Since we are grabbing the linestatus register, which + * will reset some bits after our read, we need to ensure + * we don't miss our TX FIFO emptys. + */ + if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + + linestatus = 0; + + /* Copy data from uart to the queue */ + memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n); + /* + * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed + * that all the data currently in the FIFO is free of + * breaks and parity/frame/orun errors. + */ + memset(ch->ch_equeue + head, 0, n); + + /* Add to and flip head if needed */ + head = (head + n) & RQUEUEMASK; + total -= n; + qleft -= n; + ch->ch_rxcount += n; + } + + /* + * Create a mask to determine whether we should + * insert the character (if any) into our queue. + */ + if (ch->ch_c_iflag & IGNBRK) + error_mask |= UART_LSR_BI; + + /* + * Now cleanup any leftover bytes still in the UART. + * Also deal with any possible queue overflow here as well. + */ + while (1) { + + /* + * Its possible we have a linestatus from the loop above + * this, so we "OR" on any extra bits. + */ + linestatus |= readb(&ch->ch_neo_uart->lsr); + + /* + * If the chip tells us there is no more data pending to + * be read, we can then leave. + * But before we do, cache the linestatus, just in case. + */ + if (!(linestatus & UART_LSR_DR)) { + ch->ch_cached_lsr = linestatus; + break; + } + + /* No need to store this bit */ + linestatus &= ~UART_LSR_DR; + + /* + * Since we are grabbing the linestatus register, which + * will reset some bits after our read, we need to ensure + * we don't miss our TX FIFO emptys. + */ + if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) { + linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + } + + /* + * Discard character if we are ignoring the error mask. + */ + if (linestatus & error_mask) { + u8 discard; + linestatus = 0; + memcpy_fromio(&discard, &ch->ch_neo_uart->txrxburst, 1); + continue; + } + + /* + * If our queue is full, we have no choice but to drop some data. + * The assumption is that HWFLOW or SWFLOW should have stopped + * things way way before we got to this point. + * + * I decided that I wanted to ditch the oldest data first, + * I hope thats okay with everyone? Yes? Good. + */ + while (qleft < 1) { + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Queue full, dropping DATA:%x LSR:%x\n", + ch->ch_rqueue[tail], ch->ch_equeue[tail]); + + ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK; + ch->ch_err_overrun++; + qleft++; + } + + memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1); + ch->ch_equeue[head] = (u8) linestatus; + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "DATA/LSR pair: %x %x\n", ch->ch_rqueue[head], ch->ch_equeue[head]); + + /* Ditch any remaining linestatus value. */ + linestatus = 0; + + /* Add to and flip head if needed */ + head = (head + 1) & RQUEUEMASK; + + qleft--; + ch->ch_rxcount++; + } + + /* + * Write new final heads to channel structure. + */ + ch->ch_r_head = head & RQUEUEMASK; + ch->ch_e_head = head & EQUEUEMASK; + jsm_input(ch); +} + +static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch) +{ + u16 head; + u16 tail; + int n; + int s; + int qlen; + u32 len_written = 0; + + if (!ch) + return; + + /* No data to write to the UART */ + if (ch->ch_w_tail == ch->ch_w_head) + return; + + /* If port is "stopped", don't send any data to the UART */ + if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING)) + return; + /* + * If FIFOs are disabled. Send data directly to txrx register + */ + if (!(ch->ch_flags & CH_FIFO_ENABLED)) { + u8 lsrbits = readb(&ch->ch_neo_uart->lsr); + + ch->ch_cached_lsr |= lsrbits; + if (ch->ch_cached_lsr & UART_LSR_THRE) { + ch->ch_cached_lsr &= ~(UART_LSR_THRE); + + writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx); + jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev, + "Tx data: %x\n", ch->ch_wqueue[ch->ch_w_head]); + ch->ch_w_tail++; + ch->ch_w_tail &= WQUEUEMASK; + ch->ch_txcount++; + } + return; + } + + /* + * We have to do it this way, because of the EXAR TXFIFO count bug. + */ + if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM))) + return; + + len_written = 0; + n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel; + + /* cache head and tail of queue */ + head = ch->ch_w_head & WQUEUEMASK; + tail = ch->ch_w_tail & WQUEUEMASK; + qlen = (head - tail) & WQUEUEMASK; + + /* Find minimum of the FIFO space, versus queue length */ + n = min(n, qlen); + + while (n > 0) { + + s = ((head >= tail) ? head : WQUEUESIZE) - tail; + s = min(s, n); + + if (s <= 0) + break; + + memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s); + /* Add and flip queue if needed */ + tail = (tail + s) & WQUEUEMASK; + n -= s; + ch->ch_txcount += s; + len_written += s; + } + + /* Update the final tail */ + ch->ch_w_tail = tail & WQUEUEMASK; + + if (len_written >= ch->ch_t_tlevel) + ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + + if (!jsm_tty_write(&ch->uart_port)) + uart_write_wakeup(&ch->uart_port); +} + +static void neo_parse_modem(struct jsm_channel *ch, u8 signals) +{ + u8 msignals = signals; + + jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, + "neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals); + + if (!ch) + return; + + /* Scrub off lower bits. They signify delta's, which I don't care about */ + msignals &= 0xf0; + + if (msignals & UART_MSR_DCD) + ch->ch_mistat |= UART_MSR_DCD; + else + ch->ch_mistat &= ~UART_MSR_DCD; + + if (msignals & UART_MSR_DSR) + ch->ch_mistat |= UART_MSR_DSR; + else + ch->ch_mistat &= ~UART_MSR_DSR; + + if (msignals & UART_MSR_RI) + ch->ch_mistat |= UART_MSR_RI; + else + ch->ch_mistat &= ~UART_MSR_RI; + + if (msignals & UART_MSR_CTS) + ch->ch_mistat |= UART_MSR_CTS; + else + ch->ch_mistat &= ~UART_MSR_CTS; + + jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev, + "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n", + ch->ch_portnum, + !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI), + !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD)); +} + +/* Make the UART raise any of the output signals we want up */ +static void neo_assert_modem_signals(struct jsm_channel *ch) +{ + u8 out; + + if (!ch) + return; + + out = ch->ch_mostat; + + writeb(out, &ch->ch_neo_uart->mcr); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +/* + * Flush the WRITE FIFO on the Neo. + * + * NOTE: Channel lock MUST be held before calling this function! + */ +static void neo_flush_uart_write(struct jsm_channel *ch) +{ + u8 tmp = 0; + int i = 0; + + if (!ch) + return; + + writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); + + for (i = 0; i < 10; i++) { + + /* Check to see if the UART feels it completely flushed the FIFO. */ + tmp = readb(&ch->ch_neo_uart->isr_fcr); + if (tmp & 4) { + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, + "Still flushing TX UART... i: %d\n", i); + udelay(10); + } + else + break; + } + + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); +} + + +/* + * Flush the READ FIFO on the Neo. + * + * NOTE: Channel lock MUST be held before calling this function! + */ +static void neo_flush_uart_read(struct jsm_channel *ch) +{ + u8 tmp = 0; + int i = 0; + + if (!ch) + return; + + writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr); + + for (i = 0; i < 10; i++) { + + /* Check to see if the UART feels it completely flushed the FIFO. */ + tmp = readb(&ch->ch_neo_uart->isr_fcr); + if (tmp & 2) { + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, + "Still flushing RX UART... i: %d\n", i); + udelay(10); + } + else + break; + } +} + +/* + * No locks are assumed to be held when calling this function. + */ +void neo_clear_break(struct jsm_channel *ch, int force) +{ + unsigned long lock_flags; + + spin_lock_irqsave(&ch->ch_lock, lock_flags); + + /* Turn break off, and unset some variables */ + if (ch->ch_flags & CH_BREAK_SENDING) { + u8 temp = readb(&ch->ch_neo_uart->lcr); + writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr); + + ch->ch_flags &= ~(CH_BREAK_SENDING); + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, + "clear break Finishing UART_LCR_SBC! finished: %lx\n", jiffies); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); +} + +/* + * Parse the ISR register. + */ +static inline void neo_parse_isr(struct jsm_board *brd, u32 port) +{ + struct jsm_channel *ch; + u8 isr; + u8 cause; + unsigned long lock_flags; + + if (!brd) + return; + + if (port > brd->maxports) + return; + + ch = brd->channels[port]; + if (!ch) + return; + + /* Here we try to figure out what caused the interrupt to happen */ + while (1) { + + isr = readb(&ch->ch_neo_uart->isr_fcr); + + /* Bail if no pending interrupt */ + if (isr & UART_IIR_NO_INT) + break; + + /* + * Yank off the upper 2 bits, which just show that the FIFO's are enabled. + */ + isr &= ~(UART_17158_IIR_FIFO_ENABLED); + + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "%s:%d isr: %x\n", __FILE__, __LINE__, isr); + + if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) { + /* Read data from uart -> queue */ + neo_copy_data_from_uart_to_queue(ch); + + /* Call our tty layer to enforce queue flow control if needed. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + if (isr & UART_IIR_THRI) { + /* Transfer data (if any) from Write Queue -> UART. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + neo_copy_data_from_queue_to_uart(ch); + } + + if (isr & UART_17158_IIR_XONXOFF) { + cause = readb(&ch->ch_neo_uart->xoffchar1); + + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Port %d. Got ISR_XONXOFF: cause:%x\n", port, cause); + + /* + * Since the UART detected either an XON or + * XOFF match, we need to figure out which + * one it was, so we can suspend or resume data flow. + */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + if (cause == UART_17158_XON_DETECT) { + /* Is output stopped right now, if so, resume it */ + if (brd->channels[port]->ch_flags & CH_STOP) { + ch->ch_flags &= ~(CH_STOP); + } + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Port %d. XON detected in incoming data\n", port); + } + else if (cause == UART_17158_XOFF_DETECT) { + if (!(brd->channels[port]->ch_flags & CH_STOP)) { + ch->ch_flags |= CH_STOP; + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Setting CH_STOP\n"); + } + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "Port: %d. XOFF detected in incoming data\n", port); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + if (isr & UART_17158_IIR_HWFLOW_STATE_CHANGE) { + /* + * If we get here, this means the hardware is doing auto flow control. + * Check to see whether RTS/DTR or CTS/DSR caused this interrupt. + */ + cause = readb(&ch->ch_neo_uart->mcr); + + /* Which pin is doing auto flow? RTS or DTR? */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + if ((cause & 0x4) == 0) { + if (cause & UART_MCR_RTS) + ch->ch_mostat |= UART_MCR_RTS; + else + ch->ch_mostat &= ~(UART_MCR_RTS); + } else { + if (cause & UART_MCR_DTR) + ch->ch_mostat |= UART_MCR_DTR; + else + ch->ch_mostat &= ~(UART_MCR_DTR); + } + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + /* Parse any modem signal changes */ + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "MOD_STAT: sending to parse_modem_sigs\n"); + neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); + } +} + +static inline void neo_parse_lsr(struct jsm_board *brd, u32 port) +{ + struct jsm_channel *ch; + int linestatus; + unsigned long lock_flags; + + if (!brd) + return; + + if (port > brd->maxports) + return; + + ch = brd->channels[port]; + if (!ch) + return; + + linestatus = readb(&ch->ch_neo_uart->lsr); + + jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev, + "%s:%d port: %d linestatus: %x\n", __FILE__, __LINE__, port, linestatus); + + ch->ch_cached_lsr |= linestatus; + + if (ch->ch_cached_lsr & UART_LSR_DR) { + /* Read data from uart -> queue */ + neo_copy_data_from_uart_to_queue(ch); + spin_lock_irqsave(&ch->ch_lock, lock_flags); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + } + + /* + * This is a special flag. It indicates that at least 1 + * RX error (parity, framing, or break) has happened. + * Mark this in our struct, which will tell me that I have + *to do the special RX+LSR read for this FIFO load. + */ + if (linestatus & UART_17158_RX_FIFO_DATA_ERROR) + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d Got an RX error, need to parse LSR\n", + __FILE__, __LINE__, port); + + /* + * The next 3 tests should *NOT* happen, as the above test + * should encapsulate all 3... At least, thats what Exar says. + */ + + if (linestatus & UART_LSR_PE) { + ch->ch_err_parity++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. PAR ERR!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_FE) { + ch->ch_err_frame++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. FRM ERR!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_BI) { + ch->ch_err_break++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. BRK INTR!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_OE) { + /* + * Rx Oruns. Exar says that an orun will NOT corrupt + * the FIFO. It will just replace the holding register + * with this new data byte. So basically just ignore this. + * Probably we should eventually have an orun stat in our driver... + */ + ch->ch_err_overrun++; + jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev, + "%s:%d Port: %d. Rx Overrun!\n", __FILE__, __LINE__, port); + } + + if (linestatus & UART_LSR_THRE) { + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Transfer data (if any) from Write Queue -> UART. */ + neo_copy_data_from_queue_to_uart(ch); + } + else if (linestatus & UART_17158_TX_AND_FIFO_CLR) { + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + /* Transfer data (if any) from Write Queue -> UART. */ + neo_copy_data_from_queue_to_uart(ch); + } +} + +/* + * neo_param() + * Send any/all changes to the line to the UART. + */ +static void neo_param(struct jsm_channel *ch) +{ + u8 lcr = 0; + u8 uart_lcr = 0; + u8 ier = 0; + u32 baud = 9600; + int quot = 0; + struct jsm_board *bd; + + bd = ch->ch_bd; + if (!bd) + return; + + /* + * If baud rate is zero, flush queues, and set mval to drop DTR. + */ + if ((ch->ch_c_cflag & (CBAUD)) == 0) { + ch->ch_r_head = ch->ch_r_tail = 0; + ch->ch_e_head = ch->ch_e_tail = 0; + ch->ch_w_head = ch->ch_w_tail = 0; + + neo_flush_uart_write(ch); + neo_flush_uart_read(ch); + + ch->ch_flags |= (CH_BAUD0); + ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR); + neo_assert_modem_signals(ch); + ch->ch_old_baud = 0; + return; + + } else if (ch->ch_custom_speed) { + baud = ch->ch_custom_speed; + if (ch->ch_flags & CH_BAUD0) + ch->ch_flags &= ~(CH_BAUD0); + } else { + int iindex = 0; + int jindex = 0; + + const u64 bauds[4][16] = { + { + 0, 50, 75, 110, + 134, 150, 200, 300, + 600, 1200, 1800, 2400, + 4800, 9600, 19200, 38400 }, + { + 0, 57600, 115200, 230400, + 460800, 150, 200, 921600, + 600, 1200, 1800, 2400, + 4800, 9600, 19200, 38400 }, + { + 0, 57600, 76800, 115200, + 131657, 153600, 230400, 460800, + 921600, 1200, 1800, 2400, + 4800, 9600, 19200, 38400 }, + { + 0, 57600, 115200, 230400, + 460800, 150, 200, 921600, + 600, 1200, 1800, 2400, + 4800, 9600, 19200, 38400 } + }; + + baud = C_BAUD(ch->uart_port.info->tty) & 0xff; + + if (ch->ch_c_cflag & CBAUDEX) + iindex = 1; + + jindex = baud; + + if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16)) + baud = bauds[iindex][jindex]; + else { + jsm_printk(IOCTL, DEBUG, &ch->ch_bd->pci_dev, + "baud indices were out of range (%d)(%d)", + iindex, jindex); + baud = 0; + } + + if (baud == 0) + baud = 9600; + + if (ch->ch_flags & CH_BAUD0) + ch->ch_flags &= ~(CH_BAUD0); + } + + if (ch->ch_c_cflag & PARENB) + lcr |= UART_LCR_PARITY; + + if (!(ch->ch_c_cflag & PARODD)) + lcr |= UART_LCR_EPAR; + + /* + * Not all platforms support mark/space parity, + * so this will hide behind an ifdef. + */ +#ifdef CMSPAR + if (ch->ch_c_cflag & CMSPAR) + lcr |= UART_LCR_SPAR; +#endif + + if (ch->ch_c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + + switch (ch->ch_c_cflag & CSIZE) { + case CS5: + lcr |= UART_LCR_WLEN5; + break; + case CS6: + lcr |= UART_LCR_WLEN6; + break; + case CS7: + lcr |= UART_LCR_WLEN7; + break; + case CS8: + default: + lcr |= UART_LCR_WLEN8; + break; + } + + ier = readb(&ch->ch_neo_uart->ier); + uart_lcr = readb(&ch->ch_neo_uart->lcr); + + if (baud == 0) + baud = 9600; + + quot = ch->ch_bd->bd_dividend / baud; + + if (quot != 0) { + ch->ch_old_baud = baud; + writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr); + writeb((quot & 0xff), &ch->ch_neo_uart->txrx); + writeb((quot >> 8), &ch->ch_neo_uart->ier); + writeb(lcr, &ch->ch_neo_uart->lcr); + } + + if (uart_lcr != lcr) + writeb(lcr, &ch->ch_neo_uart->lcr); + + if (ch->ch_c_cflag & CREAD) + ier |= (UART_IER_RDI | UART_IER_RLSI); + + ier |= (UART_IER_THRI | UART_IER_MSI); + + writeb(ier, &ch->ch_neo_uart->ier); + + /* Set new start/stop chars */ + neo_set_new_start_stop_chars(ch); + + if (ch->ch_c_cflag & CRTSCTS) + neo_set_cts_flow_control(ch); + else if (ch->ch_c_iflag & IXON) { + /* If start/stop is set to disable, then we should disable flow control */ + if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) + neo_set_no_output_flow_control(ch); + else + neo_set_ixon_flow_control(ch); + } + else + neo_set_no_output_flow_control(ch); + + if (ch->ch_c_cflag & CRTSCTS) + neo_set_rts_flow_control(ch); + else if (ch->ch_c_iflag & IXOFF) { + /* If start/stop is set to disable, then we should disable flow control */ + if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR)) + neo_set_no_input_flow_control(ch); + else + neo_set_ixoff_flow_control(ch); + } + else + neo_set_no_input_flow_control(ch); + /* + * Adjust the RX FIFO Trigger level if baud is less than 9600. + * Not exactly elegant, but this is needed because of the Exar chip's + * delay on firing off the RX FIFO interrupt on slower baud rates. + */ + if (baud < 9600) { + writeb(1, &ch->ch_neo_uart->rfifo); + ch->ch_r_tlevel = 1; + } + + neo_assert_modem_signals(ch); + + /* Get current status of the modem signals now */ + neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr)); + return; +} + +/* + * jsm_neo_intr() + * + * Neo specific interrupt handler. + */ +static irqreturn_t neo_intr(int irq, void *voidbrd, struct pt_regs *regs) +{ + struct jsm_board *brd = (struct jsm_board *) voidbrd; + struct jsm_channel *ch; + int port = 0; + int type = 0; + int current_port; + u32 tmp; + u32 uart_poll; + unsigned long lock_flags; + unsigned long lock_flags2; + int outofloop_count = 0; + + brd->intr_count++; + + /* Lock out the slow poller from running on this board. */ + spin_lock_irqsave(&brd->bd_intr_lock, lock_flags); + + /* + * Read in "extended" IRQ information from the 32bit Neo register. + * Bits 0-7: What port triggered the interrupt. + * Bits 8-31: Each 3bits indicate what type of interrupt occurred. + */ + uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET); + + jsm_printk(INTR, INFO, &brd->pci_dev, + "%s:%d uart_poll: %x\n", __FILE__, __LINE__, uart_poll); + + if (!uart_poll) { + jsm_printk(INTR, INFO, &brd->pci_dev, + "Kernel interrupted to me, but no pending interrupts...\n"); + spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); + return IRQ_NONE; + } + + /* At this point, we have at least SOMETHING to service, dig further... */ + + current_port = 0; + + /* Loop on each port */ + while (((uart_poll & 0xff) != 0) && (outofloop_count < 0xff)){ + + tmp = uart_poll; + outofloop_count++; + + /* Check current port to see if it has interrupt pending */ + if ((tmp & jsm_offset_table[current_port]) != 0) { + port = current_port; + type = tmp >> (8 + (port * 3)); + type &= 0x7; + } else { + current_port++; + continue; + } + + jsm_printk(INTR, INFO, &brd->pci_dev, + "%s:%d port: %x type: %x\n", __FILE__, __LINE__, port, type); + + /* Remove this port + type from uart_poll */ + uart_poll &= ~(jsm_offset_table[port]); + + if (!type) { + /* If no type, just ignore it, and move onto next port */ + jsm_printk(INTR, ERR, &brd->pci_dev, + "Interrupt with no type! port: %d\n", port); + continue; + } + + /* Switch on type of interrupt we have */ + switch (type) { + + case UART_17158_RXRDY_TIMEOUT: + /* + * RXRDY Time-out is cleared by reading data in the + * RX FIFO until it falls below the trigger level. + */ + + /* Verify the port is in range. */ + if (port > brd->nasync) + continue; + + ch = brd->channels[port]; + neo_copy_data_from_uart_to_queue(ch); + + /* Call our tty layer to enforce queue flow control if needed. */ + spin_lock_irqsave(&ch->ch_lock, lock_flags2); + jsm_check_queue_flow_control(ch); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); + + continue; + + case UART_17158_RX_LINE_STATUS: + /* + * RXRDY and RX LINE Status (logic OR of LSR[4:1]) + */ + neo_parse_lsr(brd, port); + continue; + + case UART_17158_TXRDY: + /* + * TXRDY interrupt clears after reading ISR register for the UART channel. + */ + + /* + * Yes, this is odd... + * Why would I check EVERY possibility of type of + * interrupt, when we know its TXRDY??? + * Becuz for some reason, even tho we got triggered for TXRDY, + * it seems to be occassionally wrong. Instead of TX, which + * it should be, I was getting things like RXDY too. Weird. + */ + neo_parse_isr(brd, port); + continue; + + case UART_17158_MSR: + /* + * MSR or flow control was seen. + */ + neo_parse_isr(brd, port); + continue; + + default: + /* + * The UART triggered us with a bogus interrupt type. + * It appears the Exar chip, when REALLY bogged down, will throw + * these once and awhile. + * Its harmless, just ignore it and move on. + */ + jsm_printk(INTR, ERR, &brd->pci_dev, + "%s:%d Unknown Interrupt type: %x\n", __FILE__, __LINE__, type); + continue; + } + } + + spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags); + + jsm_printk(INTR, INFO, &brd->pci_dev, "finish.\n"); + return IRQ_HANDLED; +} + +/* + * Neo specific way of turning off the receiver. + * Used as a way to enforce queue flow control when in + * hardware flow control mode. + */ +static void neo_disable_receiver(struct jsm_channel *ch) +{ + u8 tmp = readb(&ch->ch_neo_uart->ier); + tmp &= ~(UART_IER_RDI); + writeb(tmp, &ch->ch_neo_uart->ier); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + + +/* + * Neo specific way of turning on the receiver. + * Used as a way to un-enforce queue flow control when in + * hardware flow control mode. + */ +static void neo_enable_receiver(struct jsm_channel *ch) +{ + u8 tmp = readb(&ch->ch_neo_uart->ier); + tmp |= (UART_IER_RDI); + writeb(tmp, &ch->ch_neo_uart->ier); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +static void neo_send_start_character(struct jsm_channel *ch) +{ + if (!ch) + return; + + if (ch->ch_startc != __DISABLED_CHAR) { + ch->ch_xon_sends++; + writeb(ch->ch_startc, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +static void neo_send_stop_character(struct jsm_channel *ch) +{ + if (!ch) + return; + + if (ch->ch_stopc != __DISABLED_CHAR) { + ch->ch_xoff_sends++; + writeb(ch->ch_stopc, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +/* + * neo_uart_init + */ +static void neo_uart_init(struct jsm_channel *ch) +{ + writeb(0, &ch->ch_neo_uart->ier); + writeb(0, &ch->ch_neo_uart->efr); + writeb(UART_EFR_ECB, &ch->ch_neo_uart->efr); + + /* Clear out UART and FIFO */ + readb(&ch->ch_neo_uart->txrx); + writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr); + readb(&ch->ch_neo_uart->lsr); + readb(&ch->ch_neo_uart->msr); + + ch->ch_flags |= CH_FIFO_ENABLED; + + /* Assert any signals we want up */ + writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr); +} + +/* + * Make the UART completely turn off. + */ +static void neo_uart_off(struct jsm_channel *ch) +{ + /* Turn off UART enhanced bits */ + writeb(0, &ch->ch_neo_uart->efr); + + /* Stop all interrupts from occurring. */ + writeb(0, &ch->ch_neo_uart->ier); +} + +static u32 neo_get_uart_bytes_left(struct jsm_channel *ch) +{ + u8 left = 0; + u8 lsr = readb(&ch->ch_neo_uart->lsr); + + /* We must cache the LSR as some of the bits get reset once read... */ + ch->ch_cached_lsr |= lsr; + + /* Determine whether the Transmitter is empty or not */ + if (!(lsr & UART_LSR_TEMT)) + left = 1; + else { + ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM); + left = 0; + } + + return left; +} + +/* Channel lock MUST be held by the calling function! */ +static void neo_send_break(struct jsm_channel *ch) +{ + /* + * Set the time we should stop sending the break. + * If we are already sending a break, toss away the existing + * time to stop, and use this new value instead. + */ + + /* Tell the UART to start sending the break */ + if (!(ch->ch_flags & CH_BREAK_SENDING)) { + u8 temp = readb(&ch->ch_neo_uart->lcr); + writeb((temp | UART_LCR_SBC), &ch->ch_neo_uart->lcr); + ch->ch_flags |= (CH_BREAK_SENDING); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); + } +} + +/* + * neo_send_immediate_char. + * + * Sends a specific character as soon as possible to the UART, + * jumping over any bytes that might be in the write queue. + * + * The channel lock MUST be held by the calling function. + */ +static void neo_send_immediate_char(struct jsm_channel *ch, unsigned char c) +{ + if (!ch) + return; + + writeb(c, &ch->ch_neo_uart->txrx); + + /* flush write operation */ + neo_pci_posting_flush(ch->ch_bd); +} + +struct board_ops jsm_neo_ops = { + .intr = neo_intr, + .uart_init = neo_uart_init, + .uart_off = neo_uart_off, + .param = neo_param, + .assert_modem_signals = neo_assert_modem_signals, + .flush_uart_write = neo_flush_uart_write, + .flush_uart_read = neo_flush_uart_read, + .disable_receiver = neo_disable_receiver, + .enable_receiver = neo_enable_receiver, + .send_break = neo_send_break, + .clear_break = neo_clear_break, + .send_start_character = neo_send_start_character, + .send_stop_character = neo_send_stop_character, + .copy_data_from_queue_to_uart = neo_copy_data_from_queue_to_uart, + .get_uart_bytes_left = neo_get_uart_bytes_left, + .send_immediate_char = neo_send_immediate_char +}; diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c new file mode 100644 index 000000000000..7fb7cc07074b --- /dev/null +++ b/drivers/serial/jsm/jsm_tty.c @@ -0,0 +1,1038 @@ +/************************************************************************ + * Copyright 2003 Digi International (www.digi.com) + * + * Copyright (C) 2004 IBM Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the + * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR + * PURPOSE. See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 * Temple Place - Suite 330, Boston, + * MA 02111-1307, USA. + * + * Contact Information: + * Scott H Kilau + * Wendy Xiong + * + ***********************************************************************/ +#include +#include +#include +#include /* For udelay */ +#include + +#include "jsm.h" + +static inline int jsm_get_mstat(struct jsm_channel *ch) +{ + unsigned char mstat; + unsigned result; + + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n"); + + mstat = (ch->ch_mostat | ch->ch_mistat); + + result = 0; + + if (mstat & UART_MCR_DTR) + result |= TIOCM_DTR; + if (mstat & UART_MCR_RTS) + result |= TIOCM_RTS; + if (mstat & UART_MSR_CTS) + result |= TIOCM_CTS; + if (mstat & UART_MSR_DSR) + result |= TIOCM_DSR; + if (mstat & UART_MSR_RI) + result |= TIOCM_RI; + if (mstat & UART_MSR_DCD) + result |= TIOCM_CD; + + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); + return result; +} + +static unsigned int jsm_tty_tx_empty(struct uart_port *port) +{ + return TIOCSER_TEMT; +} + +/* + * Return modem signals to ld. + */ +static unsigned int jsm_tty_get_mctrl(struct uart_port *port) +{ + int result; + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + result = jsm_get_mstat(channel); + + if (result < 0) + return -ENXIO; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); + + return result; +} + +/* + * jsm_set_modem_info() + * + * Set modem signals, called by ld. + */ +static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + if (mctrl & TIOCM_RTS) + channel->ch_mostat |= UART_MCR_RTS; + else + channel->ch_mostat &= ~UART_MCR_RTS; + + if (mctrl & TIOCM_DTR) + channel->ch_mostat |= UART_MCR_DTR; + else + channel->ch_mostat &= ~UART_MCR_DTR; + + channel->ch_bd->bd_ops->assert_modem_signals(channel); + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); + udelay(10); +} + +static void jsm_tty_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + channel->ch_flags &= ~(CH_STOP); + jsm_tty_write(port); + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n"); + + channel->ch_flags |= (CH_STOP); + + jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_send_xchar(struct uart_port *port, char ch) +{ + unsigned long lock_flags; + struct jsm_channel *channel = (struct jsm_channel *)port; + + spin_lock_irqsave(&port->lock, lock_flags); + if (ch == port->info->tty->termios->c_cc[VSTART]) + channel->ch_bd->bd_ops->send_start_character(channel); + + if (ch == port->info->tty->termios->c_cc[VSTOP]) + channel->ch_bd->bd_ops->send_stop_character(channel); + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static void jsm_tty_stop_rx(struct uart_port *port) +{ + struct jsm_channel *channel = (struct jsm_channel *)port; + + channel->ch_bd->bd_ops->disable_receiver(channel); +} + +static void jsm_tty_break(struct uart_port *port, int break_state) +{ + unsigned long lock_flags; + struct jsm_channel *channel = (struct jsm_channel *)port; + + spin_lock_irqsave(&port->lock, lock_flags); + if (break_state == -1) + channel->ch_bd->bd_ops->send_break(channel); + else + channel->ch_bd->bd_ops->clear_break(channel, 0); + + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static int jsm_tty_open(struct uart_port *port) +{ + struct jsm_board *brd; + int rc = 0; + struct jsm_channel *channel = (struct jsm_channel *)port; + + /* Get board pointer from our array of majors we have allocated */ + brd = channel->ch_bd; + + /* + * Allocate channel buffers for read/write/error. + * Set flag, so we don't get trounced on. + */ + channel->ch_flags |= (CH_OPENING); + + /* Drop locks, as malloc with GFP_KERNEL can sleep */ + + if (!channel->ch_rqueue) { + channel->ch_rqueue = (u8 *) kmalloc(RQUEUESIZE, GFP_KERNEL); + if (!channel->ch_rqueue) { + jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, + "unable to allocate read queue buf"); + return -ENOMEM; + } + memset(channel->ch_rqueue, 0, RQUEUESIZE); + } + if (!channel->ch_equeue) { + channel->ch_equeue = (u8 *) kmalloc(EQUEUESIZE, GFP_KERNEL); + if (!channel->ch_equeue) { + jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, + "unable to allocate error queue buf"); + return -ENOMEM; + } + memset(channel->ch_equeue, 0, EQUEUESIZE); + } + if (!channel->ch_wqueue) { + channel->ch_wqueue = (u8 *) kmalloc(WQUEUESIZE, GFP_KERNEL); + if (!channel->ch_wqueue) { + jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev, + "unable to allocate write queue buf"); + return -ENOMEM; + } + memset(channel->ch_wqueue, 0, WQUEUESIZE); + } + + channel->ch_flags &= ~(CH_OPENING); + /* + * Initialize if neither terminal is open. + */ + jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, + "jsm_open: initializing channel in open...\n"); + + /* + * Flush input queues. + */ + channel->ch_r_head = channel->ch_r_tail = 0; + channel->ch_e_head = channel->ch_e_tail = 0; + channel->ch_w_head = channel->ch_w_tail = 0; + + brd->bd_ops->flush_uart_write(channel); + brd->bd_ops->flush_uart_read(channel); + + channel->ch_flags = 0; + channel->ch_cached_lsr = 0; + channel->ch_stops_sent = 0; + + channel->ch_c_cflag = port->info->tty->termios->c_cflag; + channel->ch_c_iflag = port->info->tty->termios->c_iflag; + channel->ch_c_oflag = port->info->tty->termios->c_oflag; + channel->ch_c_lflag = port->info->tty->termios->c_lflag; + channel->ch_startc = port->info->tty->termios->c_cc[VSTART]; + channel->ch_stopc = port->info->tty->termios->c_cc[VSTOP]; + + /* Tell UART to init itself */ + brd->bd_ops->uart_init(channel); + + /* + * Run param in case we changed anything + */ + brd->bd_ops->param(channel); + + jsm_carrier(channel); + + channel->ch_open_count++; + + jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n"); + return rc; +} + +static void jsm_tty_close(struct uart_port *port) +{ + struct jsm_board *bd; + struct termios *ts; + struct jsm_channel *channel = (struct jsm_channel *)port; + + jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n"); + + bd = channel->ch_bd; + ts = channel->uart_port.info->tty->termios; + + channel->ch_flags &= ~(CH_STOPI); + + channel->ch_open_count--; + + /* + * If we have HUPCL set, lower DTR and RTS + */ + if (channel->ch_c_cflag & HUPCL) { + jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, + "Close. HUPCL set, dropping DTR/RTS\n"); + + /* Drop RTS/DTR */ + channel->ch_mostat &= ~(UART_MCR_DTR | UART_MCR_RTS); + bd->bd_ops->assert_modem_signals(channel); + } + + channel->ch_old_baud = 0; + + /* Turn off UART interrupts for this port */ + channel->ch_bd->bd_ops->uart_off(channel); + + jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n"); +} + +static void jsm_tty_set_termios(struct uart_port *port, + struct termios *termios, + struct termios *old_termios) +{ + unsigned long lock_flags; + struct jsm_channel *channel = (struct jsm_channel *)port; + + spin_lock_irqsave(&port->lock, lock_flags); + channel->ch_c_cflag = termios->c_cflag; + channel->ch_c_iflag = termios->c_iflag; + channel->ch_c_oflag = termios->c_oflag; + channel->ch_c_lflag = termios->c_lflag; + channel->ch_startc = termios->c_cc[VSTART]; + channel->ch_stopc = termios->c_cc[VSTOP]; + + channel->ch_bd->bd_ops->param(channel); + jsm_carrier(channel); + spin_unlock_irqrestore(&port->lock, lock_flags); +} + +static const char *jsm_tty_type(struct uart_port *port) +{ + return "jsm"; +} + +static void jsm_tty_release_port(struct uart_port *port) +{ +} + +static int jsm_tty_request_port(struct uart_port *port) +{ + return 0; +} + +static void jsm_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_JSM; +} + +static struct uart_ops jsm_ops = { + .tx_empty = jsm_tty_tx_empty, + .set_mctrl = jsm_tty_set_mctrl, + .get_mctrl = jsm_tty_get_mctrl, + .stop_tx = jsm_tty_stop_tx, + .start_tx = jsm_tty_start_tx, + .send_xchar = jsm_tty_send_xchar, + .stop_rx = jsm_tty_stop_rx, + .break_ctl = jsm_tty_break, + .startup = jsm_tty_open, + .shutdown = jsm_tty_close, + .set_termios = jsm_tty_set_termios, + .type = jsm_tty_type, + .release_port = jsm_tty_release_port, + .request_port = jsm_tty_request_port, + .config_port = jsm_config_port, +}; + +/* + * jsm_tty_init() + * + * Init the tty subsystem. Called once per board after board has been + * downloaded and init'ed. + */ +int jsm_tty_init(struct jsm_board *brd) +{ + int i; + void __iomem *vaddr; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* + * Allocate channel memory that might not have been allocated + * when the driver was first loaded. + */ + for (i = 0; i < brd->nasync; i++) { + if (!brd->channels[i]) { + + /* + * Okay to malloc with GFP_KERNEL, we are not at + * interrupt context, and there are no locks held. + */ + brd->channels[i] = kmalloc(sizeof(struct jsm_channel), GFP_KERNEL); + if (!brd->channels[i]) { + jsm_printk(CORE, ERR, &brd->pci_dev, + "%s:%d Unable to allocate memory for channel struct\n", + __FILE__, __LINE__); + } + memset(brd->channels[i], 0, sizeof(struct jsm_channel)); + } + } + + ch = brd->channels[0]; + vaddr = brd->re_map_membase; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { + + if (!brd->channels[i]) + continue; + + spin_lock_init(&ch->ch_lock); + + if (brd->bd_uart_offset == 0x200) + ch->ch_neo_uart = vaddr + (brd->bd_uart_offset * i); + + ch->ch_bd = brd; + ch->ch_portnum = i; + + /* .25 second delay */ + ch->ch_close_delay = 250; + + init_waitqueue_head(&ch->ch_flags_wait); + } + + jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + return 0; +} + +int jsm_uart_port_init(struct jsm_board *brd) +{ + int i; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { + + if (!brd->channels[i]) + continue; + + brd->channels[i]->uart_port.irq = brd->irq; + brd->channels[i]->uart_port.type = PORT_JSM; + brd->channels[i]->uart_port.iotype = UPIO_MEM; + brd->channels[i]->uart_port.membase = brd->re_map_membase; + brd->channels[i]->uart_port.fifosize = 16; + brd->channels[i]->uart_port.ops = &jsm_ops; + brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2; + if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port)) + printk(KERN_INFO "Added device failed\n"); + else + printk(KERN_INFO "Added device \n"); + } + + jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + return 0; +} + +int jsm_remove_uart_port(struct jsm_board *brd) +{ + int i; + struct jsm_channel *ch; + + if (!brd) + return -ENXIO; + + jsm_printk(INIT, INFO, &brd->pci_dev, "start\n"); + + /* + * Initialize board structure elements. + */ + + brd->nasync = brd->maxports; + + /* Set up channel variables */ + for (i = 0; i < brd->nasync; i++) { + + if (!brd->channels[i]) + continue; + + ch = brd->channels[i]; + + uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port); + } + + jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n"); + return 0; +} + +void jsm_input(struct jsm_channel *ch) +{ + struct jsm_board *bd; + struct tty_struct *tp; + u32 rmask; + u16 head; + u16 tail; + int data_len; + unsigned long lock_flags; + int flip_len; + int len = 0; + int n = 0; + char *buf = NULL; + char *buf2 = NULL; + int s = 0; + int i = 0; + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); + + if (!ch) + return; + + tp = ch->uart_port.info->tty; + + bd = ch->ch_bd; + if(!bd) + return; + + spin_lock_irqsave(&ch->ch_lock, lock_flags); + + /* + *Figure the number of characters in the buffer. + *Exit immediately if none. + */ + + rmask = RQUEUEMASK; + + head = ch->ch_r_head & rmask; + tail = ch->ch_r_tail & rmask; + + data_len = (head - tail) & rmask; + if (data_len == 0) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + return; + } + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n"); + + /* + *If the device is not open, or CREAD is off, flush + *input data and return immediately. + */ + if (!tp || + !(tp->termios->c_cflag & CREAD) ) { + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum); + ch->ch_r_head = tail; + + /* Force queue flow control to be released, if needed */ + jsm_check_queue_flow_control(ch); + + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + return; + } + + /* + * If we are throttled, simply don't read any data. + */ + if (ch->ch_flags & CH_STOPI) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Port %d throttled, not reading any data. head: %x tail: %x\n", + ch->ch_portnum, head, tail); + return; + } + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n"); + + /* + * If the rxbuf is empty and we are not throttled, put as much + * as we can directly into the linux TTY flip buffer. + * The jsm_rawreadok case takes advantage of carnal knowledge that + * the char_buf and the flag_buf are next to each other and + * are each of (2 * TTY_FLIPBUF_SIZE) size. + * + * NOTE: if(!tty->real_raw), the call to ldisc.receive_buf + *actually still uses the flag buffer, so you can't + *use it for input data + */ + if (jsm_rawreadok) { + if (tp->real_raw) + flip_len = MYFLIPLEN; + else + flip_len = 2 * TTY_FLIPBUF_SIZE; + } else + flip_len = TTY_FLIPBUF_SIZE - tp->flip.count; + + len = min(data_len, flip_len); + len = min(len, (N_TTY_BUF_SIZE - 1) - tp->read_cnt); + + if (len <= 0) { + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n"); + return; + } + + /* + * If we're bypassing flip buffers on rx, we can blast it + * right into the beginning of the buffer. + */ + if (jsm_rawreadok) { + if (tp->real_raw) { + if (ch->ch_flags & CH_FLIPBUF_IN_USE) { + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "JSM - FLIPBUF in use. delaying input\n"); + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + return; + } + ch->ch_flags |= CH_FLIPBUF_IN_USE; + buf = ch->ch_bd->flipbuf; + buf2 = NULL; + } else { + buf = tp->flip.char_buf; + buf2 = tp->flip.flag_buf; + } + } else { + buf = tp->flip.char_buf_ptr; + buf2 = tp->flip.flag_buf_ptr; + } + + n = len; + + /* + * n now contains the most amount of data we can copy, + * bounded either by the flip buffer size or the amount + * of data the card actually has pending... + */ + while (n) { + s = ((head >= tail) ? head : RQUEUESIZE) - tail; + s = min(s, n); + + if (s <= 0) + break; + + memcpy(buf, ch->ch_rqueue + tail, s); + + /* buf2 is only set when port isn't raw */ + if (buf2) + memcpy(buf2, ch->ch_equeue + tail, s); + + tail += s; + buf += s; + if (buf2) + buf2 += s; + n -= s; + /* Flip queue if needed */ + tail &= rmask; + } + + /* + * In high performance mode, we don't have to update + * flag_buf or any of the counts or pointers into flip buf. + */ + if (!jsm_rawreadok) { + if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { + for (i = 0; i < len; i++) { + /* + * Give the Linux ld the flags in the + * format it likes. + */ + if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI) + tp->flip.flag_buf_ptr[i] = TTY_BREAK; + else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE) + tp->flip.flag_buf_ptr[i] = TTY_PARITY; + else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE) + tp->flip.flag_buf_ptr[i] = TTY_FRAME; + else + tp->flip.flag_buf_ptr[i] = TTY_NORMAL; + } + } else { + memset(tp->flip.flag_buf_ptr, 0, len); + } + + tp->flip.char_buf_ptr += len; + tp->flip.flag_buf_ptr += len; + tp->flip.count += len; + } + else if (!tp->real_raw) { + if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { + for (i = 0; i < len; i++) { + /* + * Give the Linux ld the flags in the + * format it likes. + */ + if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI) + tp->flip.flag_buf_ptr[i] = TTY_BREAK; + else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE) + tp->flip.flag_buf_ptr[i] = TTY_PARITY; + else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE) + tp->flip.flag_buf_ptr[i] = TTY_FRAME; + else + tp->flip.flag_buf_ptr[i] = TTY_NORMAL; + } + } else + memset(tp->flip.flag_buf, 0, len); + } + + /* + * If we're doing raw reads, jam it right into the + * line disc bypassing the flip buffers. + */ + if (jsm_rawreadok) { + if (tp->real_raw) { + ch->ch_r_tail = tail & rmask; + ch->ch_e_tail = tail & rmask; + + jsm_check_queue_flow_control(ch); + + /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */ + + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "jsm_input. %d real_raw len:%d calling receive_buf for board %d\n", + __LINE__, len, ch->ch_bd->boardnum); + tp->ldisc.receive_buf(tp, ch->ch_bd->flipbuf, NULL, len); + + /* Allow use of channel flip buffer again */ + spin_lock_irqsave(&ch->ch_lock, lock_flags); + ch->ch_flags &= ~CH_FLIPBUF_IN_USE; + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + } else { + ch->ch_r_tail = tail & rmask; + ch->ch_e_tail = tail & rmask; + + jsm_check_queue_flow_control(ch); + + /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */ + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "jsm_input. %d not real_raw len:%d calling receive_buf for board %d\n", + __LINE__, len, ch->ch_bd->boardnum); + + tp->ldisc.receive_buf(tp, tp->flip.char_buf, tp->flip.flag_buf, len); + } + } else { + ch->ch_r_tail = tail & rmask; + ch->ch_e_tail = tail & rmask; + + jsm_check_queue_flow_control(ch); + + spin_unlock_irqrestore(&ch->ch_lock, lock_flags); + + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "jsm_input. %d not jsm_read raw okay scheduling flip\n", __LINE__); + tty_schedule_flip(tp); + } + + jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n"); +} + +void jsm_carrier(struct jsm_channel *ch) +{ + struct jsm_board *bd; + + int virt_carrier = 0; + int phys_carrier = 0; + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n"); + if (!ch) + return; + + bd = ch->ch_bd; + + if (!bd) + return; + + if (ch->ch_mistat & UART_MSR_DCD) { + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD); + phys_carrier = 1; + } + + if (ch->ch_c_cflag & CLOCAL) + virt_carrier = 1; + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier); + + /* + * Test for a VIRTUAL carrier transition to HIGH. + */ + if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) { + + /* + * When carrier rises, wake any threads waiting + * for carrier in the open routine. + */ + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "carrier: virt DCD rose\n"); + + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Test for a PHYSICAL carrier transition to HIGH. + */ + if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) { + + /* + * When carrier rises, wake any threads waiting + * for carrier in the open routine. + */ + + jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, + "carrier: physical DCD rose\n"); + + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Test for a PHYSICAL transition to low, so long as we aren't + * currently ignoring physical transitions (which is what "virtual + * carrier" indicates). + * + * The transition of the virtual carrier to low really doesn't + * matter... it really only means "ignore carrier state", not + * "make pretend that carrier is there". + */ + if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0) + && (phys_carrier == 0)) { + /* + * When carrier drops: + * + * Drop carrier on all open units. + * + * Flush queues, waking up any task waiting in the + * line discipline. + * + * Send a hangup to the control terminal. + * + * Enable all select calls. + */ + if (waitqueue_active(&(ch->ch_flags_wait))) + wake_up_interruptible(&ch->ch_flags_wait); + } + + /* + * Make sure that our cached values reflect the current reality. + */ + if (virt_carrier == 1) + ch->ch_flags |= CH_FCAR; + else + ch->ch_flags &= ~CH_FCAR; + + if (phys_carrier == 1) + ch->ch_flags |= CH_CD; + else + ch->ch_flags &= ~CH_CD; +} + + +void jsm_check_queue_flow_control(struct jsm_channel *ch) +{ + int qleft = 0; + + /* Store how much space we have left in the queue */ + if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0) + qleft += RQUEUEMASK + 1; + + /* + * Check to see if we should enforce flow control on our queue because + * the ld (or user) isn't reading data out of our queue fast enuf. + * + * NOTE: This is done based on what the current flow control of the + * port is set for. + * + * 1) HWFLOW (RTS) - Turn off the UART's Receive interrupt. + * This will cause the UART's FIFO to back up, and force + * the RTS signal to be dropped. + * 2) SWFLOW (IXOFF) - Keep trying to send a stop character to + * the other side, in hopes it will stop sending data to us. + * 3) NONE - Nothing we can do. We will simply drop any extra data + * that gets sent into us when the queue fills up. + */ + if (qleft < 256) { + /* HWFLOW */ + if (ch->ch_c_cflag & CRTSCTS) { + if(!(ch->ch_flags & CH_RECEIVER_OFF)) { + ch->ch_bd->bd_ops->disable_receiver(ch); + ch->ch_flags |= (CH_RECEIVER_OFF); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Internal queue hit hilevel mark (%d)! Turning off interrupts.\n", + qleft); + } + } + /* SWFLOW */ + else if (ch->ch_c_iflag & IXOFF) { + if (ch->ch_stops_sent <= MAX_STOPS_SENT) { + ch->ch_bd->bd_ops->send_stop_character(ch); + ch->ch_stops_sent++; + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Sending stop char! Times sent: %x\n", ch->ch_stops_sent); + } + } + } + + /* + * Check to see if we should unenforce flow control because + * ld (or user) finally read enuf data out of our queue. + * + * NOTE: This is done based on what the current flow control of the + * port is set for. + * + * 1) HWFLOW (RTS) - Turn back on the UART's Receive interrupt. + * This will cause the UART's FIFO to raise RTS back up, + * which will allow the other side to start sending data again. + * 2) SWFLOW (IXOFF) - Send a start character to + * the other side, so it will start sending data to us again. + * 3) NONE - Do nothing. Since we didn't do anything to turn off the + * other side, we don't need to do anything now. + */ + if (qleft > (RQUEUESIZE / 2)) { + /* HWFLOW */ + if (ch->ch_c_cflag & CRTSCTS) { + if (ch->ch_flags & CH_RECEIVER_OFF) { + ch->ch_bd->bd_ops->enable_receiver(ch); + ch->ch_flags &= ~(CH_RECEIVER_OFF); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, + "Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n", + qleft); + } + } + /* SWFLOW */ + else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) { + ch->ch_stops_sent = 0; + ch->ch_bd->bd_ops->send_start_character(ch); + jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n"); + } + } +} + +/* + * jsm_tty_write() + * + * Take data from the user or kernel and send it out to the FEP. + * In here exists all the Transparent Print magic as well. + */ +int jsm_tty_write(struct uart_port *port) +{ + int bufcount = 0, n = 0; + int data_count = 0,data_count1 =0; + u16 head; + u16 tail; + u16 tmask; + u32 remain; + int temp_tail = port->info->xmit.tail; + struct jsm_channel *channel = (struct jsm_channel *)port; + + tmask = WQUEUEMASK; + head = (channel->ch_w_head) & tmask; + tail = (channel->ch_w_tail) & tmask; + + if ((bufcount = tail - head - 1) < 0) + bufcount += WQUEUESIZE; + + n = bufcount; + + n = min(n, 56); + remain = WQUEUESIZE - head; + + data_count = 0; + if (n >= remain) { + n -= remain; + while ((port->info->xmit.head != temp_tail) && + (data_count < remain)) { + channel->ch_wqueue[head++] = + port->info->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE - 1); + data_count++; + } + if (data_count == remain) head = 0; + } + + data_count1 = 0; + if (n > 0) { + remain = n; + while ((port->info->xmit.head != temp_tail) && + (data_count1 < remain)) { + channel->ch_wqueue[head++] = + port->info->xmit.buf[temp_tail]; + + temp_tail++; + temp_tail &= (UART_XMIT_SIZE - 1); + data_count1++; + + } + } + + port->info->xmit.tail = temp_tail; + + data_count += data_count1; + if (data_count) { + head &= tmask; + channel->ch_w_head = head; + } + + if (data_count) { + channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel); + } + + return data_count; +} + +static ssize_t jsm_driver_version_show(struct device_driver *ddp, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", JSM_VERSION); +} +static DRIVER_ATTR(version, S_IRUSR, jsm_driver_version_show, NULL); + +static ssize_t jsm_driver_state_show(struct device_driver *ddp, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", jsm_driver_state_text[jsm_driver_state]); +} +static DRIVER_ATTR(state, S_IRUSR, jsm_driver_state_show, NULL); + +void jsm_create_driver_sysfiles(struct device_driver *driverfs) +{ + driver_create_file(driverfs, &driver_attr_version); + driver_create_file(driverfs, &driver_attr_state); +} + +void jsm_remove_driver_sysfiles(struct device_driver *driverfs) +{ + driver_remove_file(driverfs, &driver_attr_version); + driver_remove_file(driverfs, &driver_attr_state); +} diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c new file mode 100644 index 000000000000..08d61f13edc6 --- /dev/null +++ b/drivers/serial/m32r_sio.c @@ -0,0 +1,1218 @@ +/* + * m32r_sio.c + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.c. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * A note about mapbase / membase + * + * mapbase is the physical address of the IO port. Currently, we don't + * support this very well, and it may well be dropped from this driver + * in future. As such, mapbase should be NULL. + * + * membase is an 'ioremapped' cookie. This is compatible with the old + * serial.c driver, and is currently the preferred form. + */ +#include + +#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define PORT_M32R_BASE PORT_M32R_SIO +#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1) +#define BAUD_RATE 115200 + +#include +#include "m32r_sio.h" +#include "m32r_sio_reg.h" + +/* + * Debugging. + */ +#if 0 +#define DEBUG_AUTOCONF(fmt...) printk(fmt) +#else +#define DEBUG_AUTOCONF(fmt...) do { } while (0) +#endif + +#if 0 +#define DEBUG_INTR(fmt...) printk(fmt) +#else +#define DEBUG_INTR(fmt...) do { } while (0) +#endif + +#define PASS_LIMIT 256 + +/* + * We default to IRQ0 for the "no irq" hack. Some + * machine types want others as well - they're free + * to redefine this in their header file. + */ +#define is_real_interrupt(irq) ((irq) != 0) + +#include + +/* Standard COM flags */ +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) + +/* + * SERIAL_PORT_DFNS tells us about built-in ports that have no + * standard enumeration mechanism. Platforms that can find all + * serial ports via mechanisms like ACPI or PCI need not supply it. + */ +#undef SERIAL_PORT_DFNS +#if defined(CONFIG_PLAT_USRV) + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */ + +#else /* !CONFIG_PLAT_USRV */ + +#if defined(CONFIG_SERIAL_M32R_PLDSIO) +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \ + STD_COM_FLAGS }, /* ttyS0 */ +#else +#define SERIAL_PORT_DFNS \ + { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \ + STD_COM_FLAGS }, /* ttyS0 */ +#endif + +#endif /* !CONFIG_PLAT_USRV */ + +static struct old_serial_port old_serial_port[] = { + SERIAL_PORT_DFNS /* defined in asm/serial.h */ +}; + +#define UART_NR ARRAY_SIZE(old_serial_port) + +struct uart_sio_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short rev; + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char lsr_break_flag; + + /* + * We provide a per-port pm hook. + */ + void (*pm)(struct uart_port *port, + unsigned int state, unsigned int old); +}; + +struct irq_info { + spinlock_t lock; + struct list_head *head; +}; + +static struct irq_info irq_lists[NR_IRQS]; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial_uart_config uart_config[] = { + [PORT_UNKNOWN] = { + .name = "unknown", + .dfl_xmit_fifo_size = 1, + .flags = 0, + }, + [PORT_INDEX(PORT_M32R_SIO)] = { + .name = "M32RSIO", + .dfl_xmit_fifo_size = 1, + .flags = 0, + }, +}; + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define __sio_in(x) inw((unsigned long)(x)) +#define __sio_out(v,x) outw((v),(unsigned long)(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned short sbaud; + sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1; + __sio_out(sbaud, PLD_ESIO0BAUR); +} + +static void sio_reset(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_init(void) +{ + unsigned short tmp; + + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0RXB); + tmp = __sio_in(PLD_ESIO0CR); + __sio_out(0x0300, PLD_ESIO0CR); + __sio_out(0x0003, PLD_ESIO0CR); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(PLD_ESIO0CR)) != 3); +} + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define __sio_in(x) inl(x) +#define __sio_out(v,x) outl((v),(x)) + +static inline void sio_set_baud_rate(unsigned long baud) +{ + unsigned long i, j; + + i = boot_cpu_data.bus_clock / (baud * 16); + j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud; + i -= 1; + j = (j + 1) >> 1; + + __sio_out(i, M32R_SIO0_BAUR_PORTL); + __sio_out(j, M32R_SIO0_RBAUR_PORTL); +} + +static void sio_reset(void) +{ + __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */ + __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */ + __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */ + sio_set_baud_rate(BAUD_RATE); + __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */ +} + +static void sio_init(void) +{ + unsigned int tmp; + + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_RXB_PORTL); + tmp = __sio_in(M32R_SIO0_STS_PORTL); + __sio_out(0x00000003, M32R_SIO0_CR_PORTL); +} + +static void sio_error(int *status) +{ + printk("SIO0 error[%04x]\n", *status); + do { + sio_init(); + } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3); +} + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +static _INLINE_ unsigned int sio_in(struct uart_sio_port *up, int offset) +{ + return __sio_in(up->port.iobase + offset); +} + +static _INLINE_ void sio_out(struct uart_sio_port *up, int offset, int value) +{ + __sio_out(value, up->port.iobase + offset); +} + +static _INLINE_ unsigned int serial_in(struct uart_sio_port *up, int offset) +{ + if (!offset) + return 0; + + return __sio_in(offset); +} + +static _INLINE_ void +serial_out(struct uart_sio_port *up, int offset, int value) +{ + if (!offset) + return; + + __sio_out(value, offset); +} + +static void m32r_sio_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void m32r_sio_start_tx(struct uart_port *port, unsigned int tty_start) +{ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + struct uart_sio_port *up = (struct uart_sio_port *)port; + struct circ_buf *xmit = &up->port.info->xmit; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + } + while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY); +#else + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +#endif +} + +static void m32r_sio_stop_rx(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static void m32r_sio_enable_ms(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static _INLINE_ void receive_chars(struct uart_sio_port *up, int *status, + struct pt_regs *regs) +{ + struct tty_struct *tty = up->port.info->tty; + unsigned char ch; + int max_count = 256; + + do { + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + tty->flip.work.func((void *)tty); + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + return; // if TTY_DONT_FLIP is set + } + ch = sio_in(up, SIORXB); + *tty->flip.char_buf_ptr = ch; + *tty->flip.flag_buf_ptr = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } + + if (*status & UART_LSR_BI) { + DEBUG_INTR("handling break...."); + *tty->flip.flag_buf_ptr = TTY_BREAK; + } else if (*status & UART_LSR_PE) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (*status & UART_LSR_FE) + *tty->flip.flag_buf_ptr = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch, regs)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) { + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + if ((*status & UART_LSR_OE) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(tty); +} + +static _INLINE_ void transmit_chars(struct uart_sio_port *up) +{ + struct circ_buf *xmit = &up->port.info->xmit; + int count; + + if (up->port.x_char) { +#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */ + serial_out(up, UART_TX, up->port.x_char); +#endif + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + m32r_sio_stop_tx(&up->port, 0); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + while (!serial_in(up, UART_LSR) & UART_LSR_THRE); + + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + DEBUG_INTR("THRE..."); + + if (uart_circ_empty(xmit)) + m32r_sio_stop_tx(&up->port, 0); +} + +/* + * This handles the interrupt from one port. + */ +static inline void m32r_sio_handle_port(struct uart_sio_port *up, + unsigned int status, struct pt_regs *regs) +{ + DEBUG_INTR("status = %x...", status); + + if (status & 0x04) + receive_chars(up, &status, regs); + if (status & 0x01) + transmit_chars(up); +} + +/* + * This is the serial driver's interrupt routine. + * + * Arjan thinks the old way was overly complex, so it got simplified. + * Alan disagrees, saying that need the complexity to handle the weird + * nature of ISA shared interrupts. (This is a special exception.) + * + * In order to handle ISA shared interrupts properly, we need to check + * that all ports have been serviced, and therefore the ISA interrupt + * line has been de-asserted. + * + * This means we need to loop through all ports. checking that they + * don't have an interrupt pending. + */ +static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id, + struct pt_regs *regs) +{ + struct irq_info *i = dev_id; + struct list_head *l, *end = NULL; + int pass_counter = 0; + + DEBUG_INTR("m32r_sio_interrupt(%d)...", irq); + +#ifdef CONFIG_SERIAL_M32R_PLDSIO +// if (irq == PLD_IRQ_SIO0_SND) +// irq = PLD_IRQ_SIO0_RCV; +#else + if (irq == M32R_IRQ_SIO0_S) + irq = M32R_IRQ_SIO0_R; +#endif + + spin_lock(&i->lock); + + l = i->head; + do { + struct uart_sio_port *up; + unsigned int sts; + + up = list_entry(l, struct uart_sio_port, list); + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts, regs); + spin_unlock(&up->port.lock); + + end = NULL; + } else if (end == NULL) + end = l; + + l = l->next; + + if (l == i->head && pass_counter++ > PASS_LIMIT) { + if (sts & 0xe0) + sio_error(&sts); + break; + } + } while (l != end); + + spin_unlock(&i->lock); + + DEBUG_INTR("end.\n"); + + return IRQ_HANDLED; +} + +/* + * To support ISA shared interrupts, we need to have one interrupt + * handler that ensures that the IRQ line has been deasserted + * before returning. Failing to do this will result in the IRQ + * line being stuck active, and, since ISA irqs are edge triggered, + * no more IRQs will be seen. + */ +static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up) +{ + spin_lock_irq(&i->lock); + + if (!list_empty(i->head)) { + if (i->head == &up->list) + i->head = i->head->next; + list_del(&up->list); + } else { + BUG_ON(i->head != &up->list); + i->head = NULL; + } + + spin_unlock_irq(&i->lock); +} + +static int serial_link_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0; + + spin_lock_irq(&i->lock); + + if (i->head) { + list_add(&up->list, i->head); + spin_unlock_irq(&i->lock); + + ret = 0; + } else { + INIT_LIST_HEAD(&up->list); + i->head = &up->list; + spin_unlock_irq(&i->lock); + + ret = request_irq(up->port.irq, m32r_sio_interrupt, + irq_flags, "SIO0-RX", i); + ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt, + irq_flags, "SIO0-TX", i); + if (ret < 0) + serial_do_unlink(i, up); + } + + return ret; +} + +static void serial_unlink_irq_chain(struct uart_sio_port *up) +{ + struct irq_info *i = irq_lists + up->port.irq; + + BUG_ON(i->head == NULL); + + if (list_empty(i->head)) { + free_irq(up->port.irq, i); + free_irq(up->port.irq + 1, i); + } + + serial_do_unlink(i, up); +} + +/* + * This function is used to handle ports that do not have an interrupt. + */ +static void m32r_sio_timeout(unsigned long data) +{ + struct uart_sio_port *up = (struct uart_sio_port *)data; + unsigned int timeout; + unsigned int sts; + + sts = sio_in(up, SIOSTS); + if (sts & 0x5) { + spin_lock(&up->port.lock); + m32r_sio_handle_port(up, sts, NULL); + spin_unlock(&up->port.lock); + } + + timeout = up->port.timeout; + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + mod_timer(&up->timer, jiffies + timeout); +} + +static unsigned int m32r_sio_tx_empty(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int m32r_sio_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + +} + +static void m32r_sio_break_ctl(struct uart_port *port, int break_state) +{ + +} + +static int m32r_sio_startup(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + int retval; + + sio_init(); + + /* + * If the "interrupt" for this port doesn't correspond with any + * hardware interrupt, we use a timer-based system. The original + * driver used to do this with IRQ0. + */ + if (!is_real_interrupt(up->port.irq)) { + unsigned int timeout = up->port.timeout; + + timeout = timeout > 6 ? (timeout / 2 - 2) : 1; + + up->timer.data = (unsigned long)up; + mod_timer(&up->timer, jiffies + timeout); + } else { + retval = serial_link_irq_chain(up); + if (retval) + return retval; + } + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + * - M32R_SIO: 0x0c + * - M32R_PLDSIO: 0x04 + */ + up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + sio_out(up, SIOTRCR, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + sio_reset(); + + return 0; +} + +static void m32r_sio_shutdown(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + sio_out(up, SIOTRCR, 0); + + /* + * Disable break condition and FIFOs + */ + + sio_init(); + + if (!is_real_interrupt(up->port.irq)) + del_timer_sync(&up->timer); + else + serial_unlink_irq_chain(up); +} + +static unsigned int m32r_sio_get_divisor(struct uart_port *port, + unsigned int baud) +{ + return uart_get_divisor(port, baud); +} + +static void m32r_sio_set_termios(struct uart_port *port, + struct termios *termios, struct termios *old) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned char cval = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + default: + case CS8: + cval = 0x03; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= 0x04; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Ask the core to calculate the divisor for us. + */ +#ifdef CONFIG_SERIAL_M32R_PLDSIO + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4); +#else + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); +#endif + quot = m32r_sio_get_divisor(port, baud); + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + sio_set_baud_rate(baud); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + up->lcr = cval; /* Save LCR */ + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void m32r_sio_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + if (up->pm) + up->pm(port, state, oldstate); +} + +/* + * Resource handling. This is complicated by the fact that resources + * depend on the port type. Maybe we should be claiming the standard + * 8250 ports, and then trying to get other resources as necessary? + */ +static int +m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res) +{ + unsigned int size = 8 << up->port.regshift; +#ifndef CONFIG_SERIAL_M32R_PLDSIO + unsigned long start; +#endif + int ret = 0; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { +#ifdef CONFIG_SERIAL_M32R_PLDSIO + *res = request_mem_region(up->port.mapbase, size, "serial"); +#else + start = up->port.mapbase; + *res = request_mem_region(start, size, "serial"); +#endif + if (!*res) + ret = -EBUSY; + } + break; + + case UPIO_PORT: + *res = request_region(up->port.iobase, size, "serial"); + if (!*res) + ret = -EBUSY; + break; + } + return ret; +} + +static void m32r_sio_release_port(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + unsigned long start, offset = 0, size = 0; + + size <<= up->port.regshift; + + switch (up->port.iotype) { + case UPIO_MEM: + if (up->port.mapbase) { + /* + * Unmap the area. + */ + iounmap(up->port.membase); + up->port.membase = NULL; + + start = up->port.mapbase; + + if (size) + release_mem_region(start + offset, size); + release_mem_region(start, 8 << up->port.regshift); + } + break; + + case UPIO_PORT: + start = up->port.iobase; + + if (size) + release_region(start + offset, size); + release_region(start + offset, 8 << up->port.regshift); + break; + + default: + break; + } +} + +static int m32r_sio_request_port(struct uart_port *port) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + struct resource *res = NULL; + int ret = 0; + + ret = m32r_sio_request_std_resource(up, &res); + + /* + * If we have a mapbase, then request that as well. + */ + if (ret == 0 && up->port.flags & UPF_IOREMAP) { + int size = res->end - res->start + 1; + + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) + ret = -ENOMEM; + } + + if (ret < 0) { + if (res) + release_resource(res); + } + + return ret; +} + +static void m32r_sio_config_port(struct uart_port *port, int flags) +{ + struct uart_sio_port *up = (struct uart_sio_port *)port; + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1); + up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int +m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq >= NR_IRQS || ser->irq < 0 || + ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || + ser->type >= ARRAY_SIZE(uart_config)) + return -EINVAL; + return 0; +} + +static const char * +m32r_sio_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops m32r_sio_pops = { + .tx_empty = m32r_sio_tx_empty, + .set_mctrl = m32r_sio_set_mctrl, + .get_mctrl = m32r_sio_get_mctrl, + .stop_tx = m32r_sio_stop_tx, + .start_tx = m32r_sio_start_tx, + .stop_rx = m32r_sio_stop_rx, + .enable_ms = m32r_sio_enable_ms, + .break_ctl = m32r_sio_break_ctl, + .startup = m32r_sio_startup, + .shutdown = m32r_sio_shutdown, + .set_termios = m32r_sio_set_termios, + .pm = m32r_sio_pm, + .type = m32r_sio_type, + .release_port = m32r_sio_release_port, + .request_port = m32r_sio_request_port, + .config_port = m32r_sio_config_port, + .verify_port = m32r_sio_verify_port, +}; + +static struct uart_sio_port m32r_sio_ports[UART_NR]; + +static void __init m32r_sio_init_ports(void) +{ + struct uart_sio_port *up; + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port); + i++, up++) { + up->port.iobase = old_serial_port[i].port; + up->port.irq = irq_canonicalize(old_serial_port[i].irq); + up->port.uartclk = old_serial_port[i].baud_base * 16; + up->port.flags = old_serial_port[i].flags; + up->port.membase = old_serial_port[i].iomem_base; + up->port.iotype = old_serial_port[i].io_type; + up->port.regshift = old_serial_port[i].iomem_reg_shift; + up->port.ops = &m32r_sio_pops; + } +} + +static void __init m32r_sio_register_ports(struct uart_driver *drv) +{ + int i; + + m32r_sio_init_ports(); + + for (i = 0; i < UART_NR; i++) { + struct uart_sio_port *up = &m32r_sio_ports[i]; + + up->port.line = i; + up->port.ops = &m32r_sio_pops; + init_timer(&up->timer); + up->timer.function = m32r_sio_timeout; + + /* + * ALPHA_KLUDGE_MCR needs to be killed. + */ + up->mcr_mask = ~ALPHA_KLUDGE_MCR; + up->mcr_force = ALPHA_KLUDGE_MCR; + + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_sio_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = sio_in(up, SIOSTS); + + if (--tmout == 0) + break; + udelay(1); + } while ((status & UART_EMPTY) != UART_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout) + udelay(1); + } +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void m32r_sio_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_sio_port *up = &m32r_sio_ports[co->index]; + unsigned int ier; + int i; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, SIOTRCR); + sio_out(up, SIOTRCR, 0); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++, s++) { + wait_for_xmitr(up); + + /* + * Send the character out. + * If a LF, also do CR... + */ + sio_out(up, SIOTXB, *s); + + if (*s == 10) { + wait_for_xmitr(up); + sio_out(up, SIOTXB, 13); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, SIOTRCR, ier); +} + +static int __init m32r_sio_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &m32r_sio_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +extern struct uart_driver m32r_sio_reg; +static struct console m32r_sio_console = { + .name = "ttyS", + .write = m32r_sio_console_write, + .device = uart_console_device, + .setup = m32r_sio_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &m32r_sio_reg, +}; + +static int __init m32r_sio_console_init(void) +{ + sio_reset(); + sio_init(); + m32r_sio_init_ports(); + register_console(&m32r_sio_console); + return 0; +} +console_initcall(m32r_sio_console_init); + +#define M32R_SIO_CONSOLE &m32r_sio_console +#else +#define M32R_SIO_CONSOLE NULL +#endif + +static struct uart_driver m32r_sio_reg = { + .owner = THIS_MODULE, + .driver_name = "sio", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = UART_NR, + .cons = M32R_SIO_CONSOLE, +}; + +/** + * m32r_sio_suspend_port - suspend one serial port + * @line: serial line number + * + * Suspend one serial port. + */ +void m32r_sio_suspend_port(int line) +{ + uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +/** + * m32r_sio_resume_port - resume one serial port + * @line: serial line number + * + * Resume one serial port. + */ +void m32r_sio_resume_port(int line) +{ + uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port); +} + +static int __init m32r_sio_init(void) +{ + int ret, i; + + printk(KERN_INFO "Serial: M32R SIO driver $Revision: 1.11 $ "); + + for (i = 0; i < NR_IRQS; i++) + spin_lock_init(&irq_lists[i].lock); + + ret = uart_register_driver(&m32r_sio_reg); + if (ret >= 0) + m32r_sio_register_ports(&m32r_sio_reg); + + return ret; +} + +static void __exit m32r_sio_exit(void) +{ + int i; + + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port); + + uart_unregister_driver(&m32r_sio_reg); +} + +module_init(m32r_sio_init); +module_exit(m32r_sio_exit); + +EXPORT_SYMBOL(m32r_sio_suspend_port); +EXPORT_SYMBOL(m32r_sio_resume_port); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Generic M32R SIO serial driver $Revision: 1.11 $"); diff --git a/drivers/serial/m32r_sio.h b/drivers/serial/m32r_sio.h new file mode 100644 index 000000000000..07d0dd80aa3d --- /dev/null +++ b/drivers/serial/m32r_sio.h @@ -0,0 +1,55 @@ +/* + * m32r_sio.h + * + * Driver for M32R serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/8250.h. + * + * Copyright (C) 2001 Russell King. + * Copyright (C) 2004 Hirokazu Takata + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include + +struct m32r_sio_probe { + struct module *owner; + int (*pci_init_one)(struct pci_dev *dev); + void (*pci_remove_one)(struct pci_dev *dev); + void (*pnp_init)(void); +}; + +int m32r_sio_register_probe(struct m32r_sio_probe *probe); +void m32r_sio_unregister_probe(struct m32r_sio_probe *probe); +void m32r_sio_get_irq_map(unsigned int *map); +void m32r_sio_suspend_port(int line); +void m32r_sio_resume_port(int line); + +struct old_serial_port { + unsigned int uart; + unsigned int baud_base; + unsigned int port; + unsigned int irq; + unsigned int flags; + unsigned char io_type; + unsigned char *iomem_base; + unsigned short iomem_reg_shift; +}; + +#define _INLINE_ inline + +#define PROBE_RSA (1 << 0) +#define PROBE_ANY (~0) + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +#ifdef CONFIG_SERIAL_SIO_SHARE_IRQ +#define M32R_SIO_SHARE_IRQS 1 +#else +#define M32R_SIO_SHARE_IRQS 0 +#endif diff --git a/drivers/serial/m32r_sio_reg.h b/drivers/serial/m32r_sio_reg.h new file mode 100644 index 000000000000..9c864529451b --- /dev/null +++ b/drivers/serial/m32r_sio_reg.h @@ -0,0 +1,153 @@ +/* + * m32r_sio_reg.h + * + * Copyright (C) 1992, 1994 by Theodore Ts'o. + * Copyright (C) 2004 Hirokazu Takata + * + * Redistribution of this file is permitted under the terms of the GNU + * Public License (GPL) + * + * These are the UART port assignments, expressed as offsets from the base + * register. These assignments should hold for any serial port based on + * a 8250, 16450, or 16550(A). + */ + +#ifndef _M32R_SIO_REG_H +#define _M32R_SIO_REG_H + +#include + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + +#define SIOCR 0x000 +#define SIOMOD0 0x002 +#define SIOMOD1 0x004 +#define SIOSTS 0x006 +#define SIOTRCR 0x008 +#define SIOBAUR 0x00a +// #define SIORBAUR 0x018 +#define SIOTXB 0x00c +#define SIORXB 0x00e + +#define UART_RX ((unsigned long) PLD_ESIO0RXB) + /* In: Receive buffer (DLAB=0) */ +#define UART_TX ((unsigned long) PLD_ESIO0TXB) + /* Out: Transmit buffer (DLAB=0) */ +#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ +#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels + * XR16C85x only */ + +#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ +#define UART_IER ((unsigned long) PLD_ESIO0INTCR) + /* Out: Interrupt Enable Register */ +#define UART_FCTR 0 /* (LCR=BF) Feature Control Register + * XR16C85x only */ + +#define UART_IIR 0 /* In: Interrupt ID Register */ +#define UART_FCR 0 /* Out: FIFO Control Register */ +#define UART_EFR 0 /* I/O: Extended Features Register */ + /* (DLAB=1, 16C660 only) */ + +#define UART_LCR 0 /* Out: Line Control Register */ +#define UART_MCR 0 /* Out: Modem Control Register */ +#define UART_LSR ((unsigned long) PLD_ESIO0STS) + /* In: Line Status Register */ +#define UART_MSR 0 /* In: Modem Status Register */ +#define UART_SCR 0 /* I/O: Scratch Register */ +#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register + * FCTR bit 6 selects SCR or EMSR + * XR16c85x only */ + +#else /* not CONFIG_SERIAL_M32R_PLDSIO */ + +#define SIOCR 0x000 +#define SIOMOD0 0x004 +#define SIOMOD1 0x008 +#define SIOSTS 0x00c +#define SIOTRCR 0x010 +#define SIOBAUR 0x014 +#define SIORBAUR 0x018 +#define SIOTXB 0x01c +#define SIORXB 0x020 + +#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */ +#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */ +#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */ +#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels + * XR16C85x only */ + +#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */ +#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */ +#define UART_FCTR 0 /* (LCR=BF) Feature Control Register + * XR16C85x only */ + +#define UART_IIR 0 /* In: Interrupt ID Register */ +#define UART_FCR 0 /* Out: FIFO Control Register */ +#define UART_EFR 0 /* I/O: Extended Features Register */ + /* (DLAB=1, 16C660 only) */ + +#define UART_LCR 0 /* Out: Line Control Register */ +#define UART_MCR 0 /* Out: Modem Control Register */ +#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */ +#define UART_MSR 0 /* In: Modem Status Register */ +#define UART_SCR 0 /* I/O: Scratch Register */ +#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register + * FCTR bit 6 selects SCR or EMSR + * XR16c85x only */ + +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + +#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * These are the definitions for the Line Control Register + * + * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting + * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. + */ +#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ +#define UART_LCR_SBC 0x40 /* Set break control */ +#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ +#define UART_LCR_EPAR 0x10 /* Even parity select */ +#define UART_LCR_PARITY 0x08 /* Parity Enable */ +#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ +#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +/* + * These are the definitions for the Line Status Register + */ +#define UART_LSR_TEMT 0x02 /* Transmitter empty */ +#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x00 /* Break interrupt indicator */ +#define UART_LSR_FE 0x80 /* Frame error indicator */ +#define UART_LSR_PE 0x40 /* Parity error indicator */ +#define UART_LSR_OE 0x20 /* Overrun error indicator */ +#define UART_LSR_DR 0x04 /* Receiver data ready */ + +/* + * These are the definitions for the Interrupt Identification Register + */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ + +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +/* + * These are the definitions for the Interrupt Enable Register + */ +#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */ + +#endif /* _M32R_SIO_REG_H */ diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c new file mode 100644 index 000000000000..8c40167778de --- /dev/null +++ b/drivers/serial/mcfserial.c @@ -0,0 +1,1883 @@ +/* + * mcfserial.c -- serial driver for ColdFire internal UARTS. + * + * Copyright (C) 1999-2003 Greg Ungerer + * Copyright (c) 2000-2001 Lineo, Inc. + * Copyright (C) 2001-2002 SnapGear Inc. + * + * Based on code from 68332serial.c which was: + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1998 TSHG + * Copyright (c) 1999 Rt-Control Inc. + * + * Changes: + * 08/07/2003 Daniele Bellucci + * some cleanups in mcfrs_write. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "mcfserial.h" + +struct timer_list mcfrs_timer_struct; + +/* + * Default console baud rate, we use this as the default + * for all ports so init can just open /dev/console and + * keep going. Perhaps one day the cflag settings for the + * console can be used instead. + */ +#if defined(CONFIG_ARNEWSH) || defined(CONFIG_MOTOROLA) || defined(CONFIG_senTec) || defined(CONFIG_SNEHA) +#define CONSOLE_BAUD_RATE 19200 +#define DEFAULT_CBAUD B19200 +#endif + +#if defined(CONFIG_HW_FEITH) + #define CONSOLE_BAUD_RATE 38400 + #define DEFAULT_CBAUD B38400 +#endif + +#ifndef CONSOLE_BAUD_RATE +#define CONSOLE_BAUD_RATE 9600 +#define DEFAULT_CBAUD B9600 +#endif + +int mcfrs_console_inited = 0; +int mcfrs_console_port = -1; +int mcfrs_console_baud = CONSOLE_BAUD_RATE; +int mcfrs_console_cbaud = DEFAULT_CBAUD; + +/* + * Driver data structures. + */ +static struct tty_driver *mcfrs_serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* Debugging... + */ +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW + +#if defined(CONFIG_M527x) || defined(CONFIG_M528x) +#define IRQBASE (MCFINT_VECBASE+MCFINT_UART0) +#else +#define IRQBASE 73 +#endif + +/* + * Configuration table, UARTs to look for at startup. + */ +static struct mcf_serial mcfrs_table[] = { + { /* ttyS0 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE1), + .irq = IRQBASE, + .flags = ASYNC_BOOT_AUTOCONF, + }, + { /* ttyS1 */ + .magic = 0, + .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2), + .irq = IRQBASE+1, + .flags = ASYNC_BOOT_AUTOCONF, + }, +}; + + +#define NR_PORTS (sizeof(mcfrs_table) / sizeof(struct mcf_serial)) + +/* + * This is used to figure out the divisor speeds and the timeouts. + */ +static int mcfrs_baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 +}; +#define MCFRS_BAUD_TABLE_SIZE \ + (sizeof(mcfrs_baud_table)/sizeof(mcfrs_baud_table[0])) + + +#ifdef CONFIG_MAGIC_SYSRQ +/* + * Magic system request keys. Used for debugging... + */ +extern int magic_sysrq_key(int ch); +#endif + + +/* + * Forware declarations... + */ +static void mcfrs_change_speed(struct mcf_serial *info); +static void mcfrs_wait_until_sent(struct tty_struct *tty, int timeout); + + +static inline int serial_paranoia_check(struct mcf_serial *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char badmagic[] = + "MCFRS(warning): bad magic number for serial struct %s in %s\n"; + static const char badinfo[] = + "MCFRS(warning): null mcf_serial for %s in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * Sets or clears DTR and RTS on the requested line. + */ +static void mcfrs_setsignals(struct mcf_serial *info, int dtr, int rts) +{ + volatile unsigned char *uartp; + unsigned long flags; + +#if 0 + printk("%s(%d): mcfrs_setsignals(info=%x,dtr=%d,rts=%d)\n", + __FILE__, __LINE__, info, dtr, rts); +#endif + + local_irq_save(flags); + if (dtr >= 0) { +#ifdef MCFPP_DTR0 + if (info->line) + mcf_setppdata(MCFPP_DTR1, (dtr ? 0 : MCFPP_DTR1)); + else + mcf_setppdata(MCFPP_DTR0, (dtr ? 0 : MCFPP_DTR0)); +#endif + } + if (rts >= 0) { + uartp = info->addr; + if (rts) { + info->sigs |= TIOCM_RTS; + uartp[MCFUART_UOP1] = MCFUART_UOP_RTS; + } else { + info->sigs &= ~TIOCM_RTS; + uartp[MCFUART_UOP0] = MCFUART_UOP_RTS; + } + } + local_irq_restore(flags); + return; +} + +/* + * Gets values of serial signals. + */ +static int mcfrs_getsignals(struct mcf_serial *info) +{ + volatile unsigned char *uartp; + unsigned long flags; + int sigs; +#if defined(CONFIG_NETtel) && defined(CONFIG_M5307) + unsigned short ppdata; +#endif + +#if 0 + printk("%s(%d): mcfrs_getsignals(info=%x)\n", __FILE__, __LINE__); +#endif + + local_irq_save(flags); + uartp = info->addr; + sigs = (uartp[MCFUART_UIPR] & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS; + sigs |= (info->sigs & TIOCM_RTS); + +#ifdef MCFPP_DCD0 +{ + unsigned int ppdata; + ppdata = mcf_getppdata(); + if (info->line == 0) { + sigs |= (ppdata & MCFPP_DCD0) ? 0 : TIOCM_CD; + sigs |= (ppdata & MCFPP_DTR0) ? 0 : TIOCM_DTR; + } else if (info->line == 1) { + sigs |= (ppdata & MCFPP_DCD1) ? 0 : TIOCM_CD; + sigs |= (ppdata & MCFPP_DTR1) ? 0 : TIOCM_DTR; + } +} +#endif + + local_irq_restore(flags); + return(sigs); +} + +/* + * ------------------------------------------------------------ + * mcfrs_stop() and mcfrs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void mcfrs_stop(struct tty_struct *tty) +{ + volatile unsigned char *uartp; + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "mcfrs_stop")) + return; + + local_irq_save(flags); + uartp = info->addr; + info->imr &= ~MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + local_irq_restore(flags); +} + +static void mcfrs_start(struct tty_struct *tty) +{ + volatile unsigned char *uartp; + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "mcfrs_start")) + return; + + local_irq_save(flags); + if (info->xmit_cnt && info->xmit_buf) { + uartp = info->addr; + info->imr |= MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + } + local_irq_restore(flags); +} + +/* + * ---------------------------------------------------------------------- + * + * Here starts the interrupt handling routines. All of the following + * subroutines are declared as inline and are folded into + * mcfrs_interrupt(). They were separated out for readability's sake. + * + * Note: mcfrs_interrupt() is a "fast" interrupt, which means that it + * runs with interrupts turned off. People who may want to modify + * mcfrs_interrupt() should try to keep the interrupt handler as fast as + * possible. After you are done making modifications, it is not a bad + * idea to do: + * + * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c + * + * and look at the resulting assemble code in serial.s. + * + * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 + * ----------------------------------------------------------------------- + */ + +static inline void receive_chars(struct mcf_serial *info) +{ + volatile unsigned char *uartp; + struct tty_struct *tty = info->tty; + unsigned char status, ch; + + if (!tty) + return; + + uartp = info->addr; + + while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) { + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + break; + + ch = uartp[MCFUART_URB]; + info->stats.rx++; + +#ifdef CONFIG_MAGIC_SYSRQ + if (mcfrs_console_inited && (info->line == mcfrs_console_port)) { + if (magic_sysrq_key(ch)) + continue; + } +#endif + + tty->flip.count++; + if (status & MCFUART_USR_RXERR) { + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; + if (status & MCFUART_USR_RXBREAK) { + info->stats.rxbreak++; + *tty->flip.flag_buf_ptr++ = TTY_BREAK; + } else if (status & MCFUART_USR_RXPARITY) { + info->stats.rxparity++; + *tty->flip.flag_buf_ptr++ = TTY_PARITY; + } else if (status & MCFUART_USR_RXOVERRUN) { + info->stats.rxoverrun++; + *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; + } else if (status & MCFUART_USR_RXFRAMING) { + info->stats.rxframing++; + *tty->flip.flag_buf_ptr++ = TTY_FRAME; + } else { + /* This should never happen... */ + *tty->flip.flag_buf_ptr++ = 0; + } + } else { + *tty->flip.flag_buf_ptr++ = 0; + } + *tty->flip.char_buf_ptr++ = ch; + } + + schedule_work(&tty->flip.work); + return; +} + +static inline void transmit_chars(struct mcf_serial *info) +{ + volatile unsigned char *uartp; + + uartp = info->addr; + + if (info->x_char) { + /* Send special char - probably flow control */ + uartp[MCFUART_UTB] = info->x_char; + info->x_char = 0; + info->stats.tx++; + } + + if ((info->xmit_cnt <= 0) || info->tty->stopped) { + info->imr &= ~MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + return; + } + + while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) { + uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->stats.tx++; + if (--info->xmit_cnt <= 0) + break; + } + + if (info->xmit_cnt < WAKEUP_CHARS) + schedule_work(&info->tqueue); + return; +} + +/* + * This is the serial driver's generic interrupt routine + */ +irqreturn_t mcfrs_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct mcf_serial *info; + unsigned char isr; + + info = &mcfrs_table[(irq - IRQBASE)]; + isr = info->addr[MCFUART_UISR] & info->imr; + + if (isr & MCFUART_UIR_RXREADY) + receive_chars(info); + if (isr & MCFUART_UIR_TXREADY) + transmit_chars(info); + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +static void mcfrs_offintr(void *private) +{ + struct mcf_serial *info = (struct mcf_serial *) private; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + tty_wakeup(tty); +} + + +/* + * Change of state on a DCD line. + */ +void mcfrs_modem_change(struct mcf_serial *info, int dcd) +{ + if (info->count == 0) + return; + + if (info->flags & ASYNC_CHECK_CD) { + if (dcd) + wake_up_interruptible(&info->open_wait); + else + schedule_work(&info->tqueue_hangup); + } +} + + +#ifdef MCFPP_DCD0 + +unsigned short mcfrs_ppstatus; + +/* + * This subroutine is called when the RS_TIMER goes off. It is used + * to monitor the state of the DCD lines - since they have no edge + * sensors and interrupt generators. + */ +static void mcfrs_timer(void) +{ + unsigned int ppstatus, dcdval, i; + + ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1); + + if (ppstatus != mcfrs_ppstatus) { + for (i = 0; (i < 2); i++) { + dcdval = (i ? MCFPP_DCD1 : MCFPP_DCD0); + if ((ppstatus & dcdval) != (mcfrs_ppstatus & dcdval)) { + mcfrs_modem_change(&mcfrs_table[i], + ((ppstatus & dcdval) ? 0 : 1)); + } + } + } + mcfrs_ppstatus = ppstatus; + + /* Re-arm timer */ + mcfrs_timer_struct.expires = jiffies + HZ/25; + add_timer(&mcfrs_timer_struct); +} + +#endif /* MCFPP_DCD0 */ + + +/* + * This routine is called from the scheduler tqueue when the interrupt + * routine has signalled that a hangup has occurred. The path of + * hangup processing is: + * + * serial interrupt routine -> (scheduler tqueue) -> + * do_serial_hangup() -> tty->hangup() -> mcfrs_hangup() + * + */ +static void do_serial_hangup(void *private) +{ + struct mcf_serial *info = (struct mcf_serial *) private; + struct tty_struct *tty; + + tty = info->tty; + if (!tty) + return; + + tty_hangup(tty); +} + +static int startup(struct mcf_serial * info) +{ + volatile unsigned char *uartp; + unsigned long flags; + + if (info->flags & ASYNC_INITIALIZED) + return 0; + + if (!info->xmit_buf) { + info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL); + if (!info->xmit_buf) + return -ENOMEM; + } + + local_irq_save(flags); + +#ifdef SERIAL_DEBUG_OPEN + printk("starting up ttyS%d (irq %d)...\n", info->line, info->irq); +#endif + + /* + * Reset UART, get it into known state... + */ + uartp = info->addr; + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ + mcfrs_setsignals(info, 1, 1); + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + /* + * and set the speed of the serial port + */ + mcfrs_change_speed(info); + + /* + * Lastly enable the UART transmitter and receiver, and + * interrupt enables. + */ + info->imr = MCFUART_UIR_RXREADY; + uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; + uartp[MCFUART_UIMR] = info->imr; + + info->flags |= ASYNC_INITIALIZED; + local_irq_restore(flags); + return 0; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct mcf_serial * info) +{ + volatile unsigned char *uartp; + unsigned long flags; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + +#ifdef SERIAL_DEBUG_OPEN + printk("Shutting down serial port %d (irq %d)....\n", info->line, + info->irq); +#endif + + local_irq_save(flags); + + uartp = info->addr; + uartp[MCFUART_UIMR] = 0; /* mask all interrupts */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ + + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + mcfrs_setsignals(info, 0, 0); + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = 0; + } + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + local_irq_restore(flags); +} + + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static void mcfrs_change_speed(struct mcf_serial *info) +{ + volatile unsigned char *uartp; + unsigned int baudclk, cflag; + unsigned long flags; + unsigned char mr1, mr2; + int i; +#ifdef CONFIG_M5272 + unsigned int fraction; +#endif + + if (!info->tty || !info->tty->termios) + return; + cflag = info->tty->termios->c_cflag; + if (info->addr == 0) + return; + +#if 0 + printk("%s(%d): mcfrs_change_speed()\n", __FILE__, __LINE__); +#endif + + i = cflag & CBAUD; + if (i & CBAUDEX) { + i &= ~CBAUDEX; + if (i < 1 || i > 4) + info->tty->termios->c_cflag &= ~CBAUDEX; + else + i += 15; + } + if (i == 0) { + mcfrs_setsignals(info, 0, -1); + return; + } + + /* compute the baudrate clock */ +#ifdef CONFIG_M5272 + /* + * For the MCF5272, also compute the baudrate fraction. + */ + baudclk = (MCF_BUSCLK / mcfrs_baud_table[i]) / 32; + fraction = MCF_BUSCLK - (baudclk * 32 * mcfrs_baud_table[i]); + fraction *= 16; + fraction /= (32 * mcfrs_baud_table[i]); +#else + baudclk = ((MCF_BUSCLK / mcfrs_baud_table[i]) + 16) / 32; +#endif + + info->baud = mcfrs_baud_table[i]; + + mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; + mr2 = 0; + + switch (cflag & CSIZE) { + case CS5: mr1 |= MCFUART_MR1_CS5; break; + case CS6: mr1 |= MCFUART_MR1_CS6; break; + case CS7: mr1 |= MCFUART_MR1_CS7; break; + case CS8: + default: mr1 |= MCFUART_MR1_CS8; break; + } + + if (cflag & PARENB) { + if (cflag & CMSPAR) { + if (cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYMARK; + else + mr1 |= MCFUART_MR1_PARITYSPACE; + } else { + if (cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYODD; + else + mr1 |= MCFUART_MR1_PARITYEVEN; + } + } else { + mr1 |= MCFUART_MR1_PARITYNONE; + } + + if (cflag & CSTOPB) + mr2 |= MCFUART_MR2_STOP2; + else + mr2 |= MCFUART_MR2_STOP1; + + if (cflag & CRTSCTS) { + mr1 |= MCFUART_MR1_RXRTS; + mr2 |= MCFUART_MR2_TXCTS; + } + + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else + info->flags |= ASYNC_CHECK_CD; + + uartp = info->addr; + + local_irq_save(flags); +#if 0 + printk("%s(%d): mr1=%x mr2=%x baudclk=%x\n", __FILE__, __LINE__, + mr1, mr2, baudclk); +#endif + /* + Note: pg 12-16 of MCF5206e User's Manual states that a + software reset should be performed prior to changing + UMR1,2, UCSR, UACR, bit 7 + */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */ + uartp[MCFUART_UMR] = mr1; + uartp[MCFUART_UMR] = mr2; + uartp[MCFUART_UBG1] = (baudclk & 0xff00) >> 8; /* set msb byte */ + uartp[MCFUART_UBG2] = (baudclk & 0xff); /* set lsb byte */ +#ifdef CONFIG_M5272 + uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */ +#endif + uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; + uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; + mcfrs_setsignals(info, 1, -1); + local_irq_restore(flags); + return; +} + +static void mcfrs_flush_chars(struct tty_struct *tty) +{ + volatile unsigned char *uartp; + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "mcfrs_flush_chars")) + return; + + uartp = (volatile unsigned char *) info->addr; + + /* + * re-enable receiver interrupt + */ + local_irq_save(flags); + if ((!(info->imr & MCFUART_UIR_RXREADY)) && + (info->flags & ASYNC_INITIALIZED) ) { + info->imr |= MCFUART_UIR_RXREADY; + uartp[MCFUART_UIMR] = info->imr; + } + local_irq_restore(flags); + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->xmit_buf) + return; + + /* Enable transmitter */ + local_irq_save(flags); + info->imr |= MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + local_irq_restore(flags); +} + +static int mcfrs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + volatile unsigned char *uartp; + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + int c, total = 0; + +#if 0 + printk("%s(%d): mcfrs_write(tty=%x,buf=%x,count=%d)\n", + __FILE__, __LINE__, (int)tty, (int)buf, count); +#endif + + if (serial_paranoia_check(info, tty->name, "mcfrs_write")) + return 0; + + if (!tty || !info->xmit_buf) + return 0; + + local_save_flags(flags); + while (1) { + local_irq_disable(); + c = min(count, (int) min(((int)SERIAL_XMIT_SIZE) - info->xmit_cnt - 1, + ((int)SERIAL_XMIT_SIZE) - info->xmit_head)); + local_irq_restore(flags); + + if (c <= 0) + break; + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + + local_irq_disable(); + info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt += c; + local_irq_restore(flags); + + buf += c; + count -= c; + total += c; + } + + local_irq_disable(); + uartp = info->addr; + info->imr |= MCFUART_UIR_TXREADY; + uartp[MCFUART_UIMR] = info->imr; + local_irq_restore(flags); + + return total; +} + +static int mcfrs_write_room(struct tty_struct *tty) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + int ret; + + if (serial_paranoia_check(info, tty->name, "mcfrs_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} + +static int mcfrs_chars_in_buffer(struct tty_struct *tty) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "mcfrs_chars_in_buffer")) + return 0; + return info->xmit_cnt; +} + +static void mcfrs_flush_buffer(struct tty_struct *tty) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "mcfrs_flush_buffer")) + return; + + local_irq_save(flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + local_irq_restore(flags); + + tty_wakeup(tty); +} + +/* + * ------------------------------------------------------------ + * mcfrs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void mcfrs_throttle(struct tty_struct * tty) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("throttle %s: %d....\n", _tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "mcfrs_throttle")) + return; + + if (I_IXOFF(tty)) + info->x_char = STOP_CHAR(tty); + + /* Turn off RTS line (do this atomic) */ +} + +static void mcfrs_unthrottle(struct tty_struct * tty) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; +#ifdef SERIAL_DEBUG_THROTTLE + char buf[64]; + + printk("unthrottle %s: %d....\n", _tty_name(tty, buf), + tty->ldisc.chars_in_buffer(tty)); +#endif + + if (serial_paranoia_check(info, tty->name, "mcfrs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + info->x_char = START_CHAR(tty); + } + + /* Assert RTS line (do this atomic) */ +} + +/* + * ------------------------------------------------------------ + * mcfrs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int get_serial_info(struct mcf_serial * info, + struct serial_struct * retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = (unsigned int) info->addr; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0; +} + +static int set_serial_info(struct mcf_serial * info, + struct serial_struct * new_info) +{ + struct serial_struct new_serial; + struct mcf_serial old_info; + int retval = 0; + + if (!new_info) + return -EFAULT; + if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.type != info->type) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != + (info->flags & ~ASYNC_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + info->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if (info->count > 1) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud_base = new_serial.baud_base; + info->flags = ((info->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + +check_and_exit: + retval = startup(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct mcf_serial * info, unsigned int *value) +{ + volatile unsigned char *uartp; + unsigned long flags; + unsigned char status; + + local_irq_save(flags); + uartp = info->addr; + status = (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0; + local_irq_restore(flags); + + return put_user(status,value); +} + +/* + * This routine sends a break character out the serial port. + */ +static void send_break( struct mcf_serial * info, int duration) +{ + volatile unsigned char *uartp; + unsigned long flags; + + if (!info->addr) + return; + set_current_state(TASK_INTERRUPTIBLE); + uartp = info->addr; + + local_irq_save(flags); + uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTART; + schedule_timeout(duration); + uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTOP; + local_irq_restore(flags); +} + +static int mcfrs_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl")) + return -ENODEV; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + return mcfrs_getsignals(info); +} + +static int mcfrs_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; + int rts = -1, dtr = -1; + + if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl")) + return -ENODEV; + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + if (set & TIOCM_RTS) + rts = 1; + if (set & TIOCM_DTR) + dtr = 1; + if (clear & TIOCM_RTS) + rts = 0; + if (clear & TIOCM_DTR) + dtr = 0; + + mcfrs_setsignals(info, dtr, rts); + + return 0; +} + +static int mcfrs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; + int retval, error; + + if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TCSBRK: /* SVID version: non-zero arg --> no break */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (!arg) + send_break(info, HZ/4); /* 1/4 second */ + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + send_break(info, arg ? arg*(HZ/10) : HZ/4); + return 0; + case TIOCGSOFTCAR: + error = put_user(C_CLOCAL(tty) ? 1 : 0, + (unsigned long *) arg); + if (error) + return error; + return 0; + case TIOCSSOFTCAR: + get_user(arg, (unsigned long *) arg); + tty->termios->c_cflag = + ((tty->termios->c_cflag & ~CLOCAL) | + (arg ? CLOCAL : 0)); + return 0; + case TIOCGSERIAL: + if (access_ok(VERIFY_WRITE, (void *) arg, + sizeof(struct serial_struct))) + return get_serial_info(info, + (struct serial_struct *) arg); + return -EFAULT; + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *) arg); + case TIOCSERGETLSR: /* Get line status register */ + if (access_ok(VERIFY_WRITE, (void *) arg, + sizeof(unsigned int))) + return get_lsr_info(info, (unsigned int *) arg); + return -EFAULT; + case TIOCSERGSTRUCT: + error = copy_to_user((struct mcf_serial *) arg, + info, sizeof(struct mcf_serial)); + if (error) + return -EFAULT; + return 0; + +#ifdef TIOCSET422 + case TIOCSET422: { + unsigned int val; + get_user(val, (unsigned int *) arg); + mcf_setpa(MCFPP_PA11, (val ? 0 : MCFPP_PA11)); + break; + } + case TIOCGET422: { + unsigned int val; + val = (mcf_getpa() & MCFPP_PA11) ? 0 : 1; + put_user(val, (unsigned int *) arg); + break; + } +#endif + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void mcfrs_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + + if (tty->termios->c_cflag == old_termios->c_cflag) + return; + + mcfrs_change_speed(info); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + mcfrs_setsignals(info, -1, 1); +#if 0 + mcfrs_start(tty); +#endif + } +} + +/* + * ------------------------------------------------------------ + * mcfrs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * S structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void mcfrs_close(struct tty_struct *tty, struct file * filp) +{ + volatile unsigned char *uartp; + struct mcf_serial *info = (struct mcf_serial *)tty->driver_data; + unsigned long flags; + + if (!info || serial_paranoia_check(info, tty->name, "mcfrs_close")) + return; + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + local_irq_restore(flags); + return; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("mcfrs_close ttyS%d, count = %d\n", info->line, info->count); +#endif + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("MCFRS: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk("MCFRS: bad serial port count for ttyS%d: %d\n", + info->line, info->count); + info->count = 0; + } + if (info->count) { + local_irq_restore(flags); + return; + } + info->flags |= ASYNC_CLOSING; + + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + info->imr &= ~MCFUART_UIR_RXREADY; + uartp = info->addr; + uartp[MCFUART_UIMR] = info->imr; + +#if 0 + /* FIXME: do we need to keep this enabled for console?? */ + if (mcfrs_console_inited && (mcfrs_console_port == info->line)) { + /* Do not disable the UART */ ; + } else +#endif + shutdown(info); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + tty_ldisc_flush(tty); + + tty->closing = 0; + info->event = 0; + info->tty = 0; +#if 0 + if (tty->ldisc.num != ldiscs[N_TTY].num) { + if (tty->ldisc.close) + (tty->ldisc.close)(tty); + tty->ldisc = ldiscs[N_TTY]; + tty->termios->c_line = N_TTY; + if (tty->ldisc.open) + (tty->ldisc.open)(tty); + } +#endif + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); +} + +/* + * mcfrs_wait_until_sent() --- wait until the transmitter is empty + */ +static void +mcfrs_wait_until_sent(struct tty_struct *tty, int timeout) +{ +#ifdef CONFIG_M5272 +#define MCF5272_FIFO_SIZE 25 /* fifo size + shift reg */ + + struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; + volatile unsigned char *uartp; + unsigned long orig_jiffies, fifo_time, char_time, fifo_cnt; + + if (serial_paranoia_check(info, tty->name, "mcfrs_wait_until_sent")) + return; + + orig_jiffies = jiffies; + + /* + * Set the check interval to be 1/5 of the approximate time + * to send the entire fifo, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + fifo_time = (MCF5272_FIFO_SIZE * HZ * 10) / info->baud; + char_time = fifo_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout && timeout < char_time) + char_time = timeout; + + /* + * Clamp the timeout period at 2 * the time to empty the + * fifo. Just to be safe, set the minimum at .5 seconds. + */ + fifo_time *= 2; + if (fifo_time < (HZ/2)) + fifo_time = HZ/2; + if (!timeout || timeout > fifo_time) + timeout = fifo_time; + + /* + * Account for the number of bytes in the UART + * transmitter FIFO plus any byte being shifted out. + */ + uartp = (volatile unsigned char *) info->addr; + for (;;) { + fifo_cnt = (uartp[MCFUART_UTF] & MCFUART_UTF_TXB); + if ((uartp[MCFUART_USR] & (MCFUART_USR_TXREADY| + MCFUART_USR_TXEMPTY)) == + MCFUART_USR_TXREADY) + fifo_cnt++; + if (fifo_cnt == 0) + break; + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } +#else + /* + * For the other coldfire models, assume all data has been sent + */ +#endif +} + +/* + * mcfrs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void mcfrs_hangup(struct tty_struct *tty) +{ + struct mcf_serial * info = (struct mcf_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "mcfrs_hangup")) + return; + + mcfrs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = 0; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * mcfrs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct mcf_serial *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (info->flags & ASYNC_CLOSING) { + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * mcfrs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready before block: ttyS%d, count = %d\n", + info->line, info->count); +#endif + info->count--; + info->blocked_open++; + while (1) { + local_irq_disable(); + mcfrs_setsignals(info, 1, 1); + local_irq_enable(); + current->state = TASK_INTERRUPTIBLE; + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal || (mcfrs_getsignals(info) & TIOCM_CD))) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready blocking: ttyS%d, count = %d\n", + info->line, info->count); +#endif + schedule(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + info->count++; + info->blocked_open--; +#ifdef SERIAL_DEBUG_OPEN + printk("block_til_ready after blocking: ttyS%d, count = %d\n", + info->line, info->count); +#endif + if (retval) + return retval; + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +int mcfrs_open(struct tty_struct *tty, struct file * filp) +{ + struct mcf_serial *info; + int retval, line; + + line = tty->index; + if ((line < 0) || (line >= NR_PORTS)) + return -ENODEV; + info = mcfrs_table + line; + if (serial_paranoia_check(info, tty->name, "mcfrs_open")) + return -ENODEV; +#ifdef SERIAL_DEBUG_OPEN + printk("mcfrs_open %s, count = %d\n", tty->name, info->count); +#endif + info->count++; + tty->driver_data = info; + info->tty = tty; + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) + return retval; + + retval = block_til_ready(tty, filp, info); + if (retval) { +#ifdef SERIAL_DEBUG_OPEN + printk("mcfrs_open returning after block_til_ready with %d\n", + retval); +#endif + return retval; + } + +#ifdef SERIAL_DEBUG_OPEN + printk("mcfrs_open %s successful...\n", tty->name); +#endif + return 0; +} + +/* + * Based on the line number set up the internal interrupt stuff. + */ +static void mcfrs_irqinit(struct mcf_serial *info) +{ +#if defined(CONFIG_M5272) + volatile unsigned long *icrp; + volatile unsigned long *portp; + volatile unsigned char *uartp; + + uartp = info->addr; + icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR2); + + switch (info->line) { + case 0: + *icrp = 0xe0000000; + break; + case 1: + *icrp = 0x0e000000; + break; + default: + printk("MCFRS: don't know how to handle UART %d interrupt?\n", + info->line); + return; + } + + /* Enable the output lines for the serial ports */ + portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PBCNT); + *portp = (*portp & ~0x000000ff) | 0x00000055; + portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT); + *portp = (*portp & ~0x000003fc) | 0x000002a8; +#elif defined(CONFIG_M527x) || defined(CONFIG_M528x) + volatile unsigned char *icrp, *uartp; + volatile unsigned long *imrp; + + uartp = info->addr; + + icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 + + MCFINTC_ICR0 + MCFINT_UART0 + info->line); + *icrp = 0x33; /* UART0 with level 6, priority 3 */ + + imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 + + MCFINTC_IMRL); + *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1); +#else + volatile unsigned char *icrp, *uartp; + + switch (info->line) { + case 0: + icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART1ICR); + *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 | + MCFSIM_ICR_PRI1; + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1); + break; + case 1: + icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART2ICR); + *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 | + MCFSIM_ICR_PRI2; + mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2); + break; + default: + printk("MCFRS: don't know how to handle UART %d interrupt?\n", + info->line); + return; + } + + uartp = info->addr; + uartp[MCFUART_UIVR] = info->irq; +#endif + + /* Clear mask, so no surprise interrupts. */ + uartp[MCFUART_UIMR] = 0; + + if (request_irq(info->irq, mcfrs_interrupt, SA_INTERRUPT, + "ColdFire UART", NULL)) { + printk("MCFRS: Unable to attach ColdFire UART %d interrupt " + "vector=%d\n", info->line, info->irq); + } + + return; +} + + +char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n"; + + +/* + * Serial stats reporting... + */ +int mcfrs_readproc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + struct mcf_serial *info; + char str[20]; + int len, sigs, i; + + len = sprintf(page, mcfrs_drivername); + for (i = 0; (i < NR_PORTS); i++) { + info = &mcfrs_table[i]; + len += sprintf((page + len), "%d: port:%x irq=%d baud:%d ", + i, (unsigned int) info->addr, info->irq, info->baud); + if (info->stats.rx || info->stats.tx) + len += sprintf((page + len), "tx:%d rx:%d ", + info->stats.tx, info->stats.rx); + if (info->stats.rxframing) + len += sprintf((page + len), "fe:%d ", + info->stats.rxframing); + if (info->stats.rxparity) + len += sprintf((page + len), "pe:%d ", + info->stats.rxparity); + if (info->stats.rxbreak) + len += sprintf((page + len), "brk:%d ", + info->stats.rxbreak); + if (info->stats.rxoverrun) + len += sprintf((page + len), "oe:%d ", + info->stats.rxoverrun); + + str[0] = str[1] = 0; + if ((sigs = mcfrs_getsignals(info))) { + if (sigs & TIOCM_RTS) + strcat(str, "|RTS"); + if (sigs & TIOCM_CTS) + strcat(str, "|CTS"); + if (sigs & TIOCM_DTR) + strcat(str, "|DTR"); + if (sigs & TIOCM_CD) + strcat(str, "|CD"); + } + + len += sprintf((page + len), "%s\n", &str[1]); + } + + return(len); +} + + +/* Finally, routines used to initialize the serial driver. */ + +static void show_serial_version(void) +{ + printk(mcfrs_drivername); +} + +static struct tty_operations mcfrs_ops = { + .open = mcfrs_open, + .close = mcfrs_close, + .write = mcfrs_write, + .flush_chars = mcfrs_flush_chars, + .write_room = mcfrs_write_room, + .chars_in_buffer = mcfrs_chars_in_buffer, + .flush_buffer = mcfrs_flush_buffer, + .ioctl = mcfrs_ioctl, + .throttle = mcfrs_throttle, + .unthrottle = mcfrs_unthrottle, + .set_termios = mcfrs_set_termios, + .stop = mcfrs_stop, + .start = mcfrs_start, + .hangup = mcfrs_hangup, + .read_proc = mcfrs_readproc, + .wait_until_sent = mcfrs_wait_until_sent, + .tiocmget = mcfrs_tiocmget, + .tiocmset = mcfrs_tiocmset, +}; + +/* mcfrs_init inits the driver */ +static int __init +mcfrs_init(void) +{ + struct mcf_serial *info; + unsigned long flags; + int i; + + /* Setup base handler, and timer table. */ +#ifdef MCFPP_DCD0 + init_timer(&mcfrs_timer_struct); + mcfrs_timer_struct.function = mcfrs_timer; + mcfrs_timer_struct.data = 0; + mcfrs_timer_struct.expires = jiffies + HZ/25; + add_timer(&mcfrs_timer_struct); + mcfrs_ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1); +#endif + mcfrs_serial_driver = alloc_tty_driver(NR_PORTS); + if (!mcfrs_serial_driver) + return -ENOMEM; + + show_serial_version(); + + /* Initialize the tty_driver structure */ + mcfrs_serial_driver->owner = THIS_MODULE; + mcfrs_serial_driver->name = "ttyS"; + mcfrs_serial_driver->devfs_name = "ttys/"; + mcfrs_serial_driver->driver_name = "serial"; + mcfrs_serial_driver->major = TTY_MAJOR; + mcfrs_serial_driver->minor_start = 64; + mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + mcfrs_serial_driver->subtype = SERIAL_TYPE_NORMAL; + mcfrs_serial_driver->init_termios = tty_std_termios; + + mcfrs_serial_driver->init_termios.c_cflag = + mcfrs_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL; + mcfrs_serial_driver->flags = TTY_DRIVER_REAL_RAW; + + tty_set_operations(mcfrs_serial_driver, &mcfrs_ops); + + if (tty_register_driver(mcfrs_serial_driver)) { + printk("MCFRS: Couldn't register serial driver\n"); + put_tty_driver(mcfrs_serial_driver); + return(-EBUSY); + } + + local_irq_save(flags); + + /* + * Configure all the attached serial ports. + */ + for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) { + info->magic = SERIAL_MAGIC; + info->line = i; + info->tty = 0; + info->custom_divisor = 16; + info->close_delay = 50; + info->closing_wait = 3000; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + INIT_WORK(&info->tqueue, mcfrs_offintr, info); + INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + + info->imr = 0; + mcfrs_setsignals(info, 0, 0); + mcfrs_irqinit(info); + + printk("ttyS%d at 0x%04x (irq = %d)", info->line, + (unsigned int) info->addr, info->irq); + printk(" is a builtin ColdFire UART\n"); + } + + local_irq_restore(flags); + return 0; +} + +module_init(mcfrs_init); + +/****************************************************************************/ +/* Serial Console */ +/****************************************************************************/ + +/* + * Quick and dirty UART initialization, for console output. + */ + +void mcfrs_init_console(void) +{ + volatile unsigned char *uartp; + unsigned int clk; + + /* + * Reset UART, get it into known state... + */ + uartp = (volatile unsigned char *) (MCF_MBAR + + (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1)); + + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */ + uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */ + + /* + * Set port for defined baud , 8 data bits, 1 stop bit, no parity. + */ + uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8; + uartp[MCFUART_UMR] = MCFUART_MR2_STOP1; + + clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */ + uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */ + uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */ + + uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER; + uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE; + + mcfrs_console_inited++; + return; +} + + +/* + * Setup for console. Argument comes from the boot command line. + */ + +int mcfrs_console_setup(struct console *cp, char *arg) +{ + int i, n = CONSOLE_BAUD_RATE; + + if (!cp) + return(-1); + + if (!strncmp(cp->name, "ttyS", 4)) + mcfrs_console_port = cp->index; + else if (!strncmp(cp->name, "cua", 3)) + mcfrs_console_port = cp->index; + else + return(-1); + + if (arg) + n = simple_strtoul(arg,NULL,0); + for (i = 0; i < MCFRS_BAUD_TABLE_SIZE; i++) + if (mcfrs_baud_table[i] == n) + break; + if (i < MCFRS_BAUD_TABLE_SIZE) { + mcfrs_console_baud = n; + mcfrs_console_cbaud = 0; + if (i > 15) { + mcfrs_console_cbaud |= CBAUDEX; + i -= 15; + } + mcfrs_console_cbaud |= i; + } + mcfrs_init_console(); /* make sure baud rate changes */ + return(0); +} + + +static struct tty_driver *mcfrs_console_device(struct console *c, int *index) +{ + *index = c->index; + return mcfrs_serial_driver; +} + + +/* + * Output a single character, using UART polled mode. + * This is used for console output. + */ + +void mcfrs_put_char(char ch) +{ + volatile unsigned char *uartp; + unsigned long flags; + int i; + + uartp = (volatile unsigned char *) (MCF_MBAR + + (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1)); + + local_irq_save(flags); + for (i = 0; (i < 0x10000); i++) { + if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) + break; + } + if (i < 0x10000) { + uartp[MCFUART_UTB] = ch; + for (i = 0; (i < 0x10000); i++) + if (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) + break; + } + if (i >= 0x10000) + mcfrs_init_console(); /* try and get it back */ + local_irq_restore(flags); + + return; +} + + +/* + * rs_console_write is registered for printk output. + */ + +void mcfrs_console_write(struct console *cp, const char *p, unsigned len) +{ + if (!mcfrs_console_inited) + mcfrs_init_console(); + while (len-- > 0) { + if (*p == '\n') + mcfrs_put_char('\r'); + mcfrs_put_char(*p++); + } +} + +/* + * declare our consoles + */ + +struct console mcfrs_console = { + .name = "ttyS", + .write = mcfrs_console_write, + .device = mcfrs_console_device, + .setup = mcfrs_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int __init mcfrs_console_init(void) +{ + register_console(&mcfrs_console); + return 0; +} + +console_initcall(mcfrs_console_init); + +/****************************************************************************/ diff --git a/drivers/serial/mcfserial.h b/drivers/serial/mcfserial.h new file mode 100644 index 000000000000..a2b28e8629f9 --- /dev/null +++ b/drivers/serial/mcfserial.h @@ -0,0 +1,75 @@ +/* + * mcfserial.c -- serial driver for ColdFire internal UARTS. + * + * Copyright (c) 1999 Greg Ungerer + * Copyright (c) 2000-2001 Lineo, Inc. + * Copyright (c) 2002 SnapGear Inc., + * + * Based on code from 68332serial.c which was: + * + * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Copyright (C) 1998 TSHG + * Copyright (c) 1999 Rt-Control Inc. + */ +#ifndef _MCF_SERIAL_H +#define _MCF_SERIAL_H + +#include +#include + +#ifdef __KERNEL__ + +/* + * Define a local serial stats structure. + */ + +struct mcf_stats { + unsigned int rx; + unsigned int tx; + unsigned int rxbreak; + unsigned int rxframing; + unsigned int rxparity; + unsigned int rxoverrun; +}; + + +/* + * This is our internal structure for each serial port's state. + * Each serial port has one of these structures associated with it. + */ + +struct mcf_serial { + int magic; + volatile unsigned char *addr; /* UART memory address */ + int irq; + int flags; /* defined in tty.h */ + int type; /* UART type */ + struct tty_struct *tty; + unsigned char imr; /* Software imr register */ + unsigned int baud; + int sigs; + int custom_divisor; + int x_char; /* xon/xoff character */ + int baud_base; + int close_delay; + unsigned short closing_wait; + unsigned short closing_wait2; + unsigned long event; + int line; + int count; /* # of fd on device */ + int blocked_open; /* # of blocked opens */ + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; + struct mcf_stats stats; + struct work_struct tqueue; + struct work_struct tqueue_hangup; + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + +}; + +#endif /* __KERNEL__ */ + +#endif /* _MCF_SERIAL_H */ diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c new file mode 100644 index 000000000000..2a5cf174ca30 --- /dev/null +++ b/drivers/serial/mpc52xx_uart.c @@ -0,0 +1,852 @@ +/* + * drivers/serial/mpc52xx_uart.c + * + * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs. + * + * FIXME According to the usermanual the status bits in the status register + * are only updated when the peripherals access the FIFO and not when the + * CPU access them. So since we use this bits to know when we stop writing + * and reading, they may not be updated in-time and a race condition may + * exists. But I haven't be able to prove this and I don't care. But if + * any problem arises, it might worth checking. The TX/RX FIFO Stats + * registers should be used in addition. + * Update: Actually, they seem updated ... At least the bits we use. + * + * + * Maintainer : Sylvain Munaut + * + * Some of the code has been inspired/copied from the 2.4 code written + * by Dale Farnsworth . + * + * Copyright (C) 2004-2005 Sylvain Munaut + * Copyright (C) 2003 MontaVista, Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* Platform device Usage : + * + * Since PSCs can have multiple function, the correct driver for each one + * is selected by calling mpc52xx_match_psc_function(...). The function + * handled by this driver is "uart". + * + * The driver init all necessary registers to place the PSC in uart mode without + * DCD. However, the pin multiplexing aren't changed and should be set either + * by the bootloader or in the platform init code. + * + * The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2, + * and so on). So the PSC1 is mapped to /dev/ttyS0, PSC2 to /dev/ttyS1 and so + * on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly for + * the console code : without this 1:1 mapping, at early boot time, when we are + * parsing the kernel args console=ttyS?, we wouldn't know wich PSC it will be + * mapped to. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + + + +#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */ + + +static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM]; + /* Rem: - We use the read_status_mask as a shadow of + * psc->mpc52xx_psc_imr + * - It's important that is array is all zero on start as we + * use it to know if it's initialized or not ! If it's not sure + * it's cleared, then a memset(...,0,...) should be added to + * the console_init + */ + +#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase)) + + +/* Forward declaration of the interruption handling routine */ +static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id,struct pt_regs *regs); + + +/* Simple macro to test if a port is console or not. This one is taken + * for serial_core.c and maybe should be moved to serial_core.h ? */ +#ifdef CONFIG_SERIAL_CORE_CONSOLE +#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) +#else +#define uart_console(port) (0) +#endif + + +/* ======================================================================== */ +/* UART operations */ +/* ======================================================================== */ + +static unsigned int +mpc52xx_uart_tx_empty(struct uart_port *port) +{ + int status = in_be16(&PSC(port)->mpc52xx_psc_status); + return (status & MPC52xx_PSC_SR_TXEMP) ? TIOCSER_TEMT : 0; +} + +static void +mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* Not implemented */ +} + +static unsigned int +mpc52xx_uart_get_mctrl(struct uart_port *port) +{ + /* Not implemented */ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void +mpc52xx_uart_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + /* port->lock taken by caller */ + port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); +} + +static void +mpc52xx_uart_start_tx(struct uart_port *port, unsigned int tty_start) +{ + /* port->lock taken by caller */ + port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); +} + +static void +mpc52xx_uart_send_xchar(struct uart_port *port, char ch) +{ + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + + port->x_char = ch; + if (ch) { + /* Make sure tx interrupts are on */ + /* Truly necessary ??? They should be anyway */ + port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void +mpc52xx_uart_stop_rx(struct uart_port *port) +{ + /* port->lock taken by caller */ + port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY; + out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask); +} + +static void +mpc52xx_uart_enable_ms(struct uart_port *port) +{ + /* Not implemented */ +} + +static void +mpc52xx_uart_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + + if ( ctl == -1 ) + out_8(&PSC(port)->command,MPC52xx_PSC_START_BRK); + else + out_8(&PSC(port)->command,MPC52xx_PSC_STOP_BRK); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int +mpc52xx_uart_startup(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + int ret; + + /* Request IRQ */ + ret = request_irq(port->irq, mpc52xx_uart_int, + SA_INTERRUPT | SA_SAMPLE_RANDOM, "mpc52xx_psc_uart", port); + if (ret) + return ret; + + /* Reset/activate the port, clear and enable interrupts */ + out_8(&psc->command,MPC52xx_PSC_RST_RX); + out_8(&psc->command,MPC52xx_PSC_RST_TX); + + out_be32(&psc->sicr,0); /* UART mode DCD ignored */ + + out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */ + + out_8(&psc->rfcntl, 0x00); + out_be16(&psc->rfalarm, 0x1ff); + out_8(&psc->tfcntl, 0x07); + out_be16(&psc->tfalarm, 0x80); + + port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY; + out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask); + + out_8(&psc->command,MPC52xx_PSC_TX_ENABLE); + out_8(&psc->command,MPC52xx_PSC_RX_ENABLE); + + return 0; +} + +static void +mpc52xx_uart_shutdown(struct uart_port *port) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + + /* Shut down the port, interrupt and all */ + out_8(&psc->command,MPC52xx_PSC_RST_RX); + out_8(&psc->command,MPC52xx_PSC_RST_TX); + + port->read_status_mask = 0; + out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask); + + /* Release interrupt */ + free_irq(port->irq, port); +} + +static void +mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new, + struct termios *old) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + unsigned long flags; + unsigned char mr1, mr2; + unsigned short ctr; + unsigned int j, baud, quot; + + /* Prepare what we're gonna write */ + mr1 = 0; + + switch (new->c_cflag & CSIZE) { + case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS; + break; + case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS; + break; + case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS; + break; + case CS8: + default: mr1 |= MPC52xx_PSC_MODE_8_BITS; + } + + if (new->c_cflag & PARENB) { + mr1 |= (new->c_cflag & PARODD) ? + MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; + } else + mr1 |= MPC52xx_PSC_MODE_PARNONE; + + + mr2 = 0; + + if (new->c_cflag & CSTOPB) + mr2 |= MPC52xx_PSC_MODE_TWO_STOP; + else + mr2 |= ((new->c_cflag & CSIZE) == CS5) ? + MPC52xx_PSC_MODE_ONE_STOP_5_BITS : + MPC52xx_PSC_MODE_ONE_STOP; + + + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + ctr = quot & 0xffff; + + /* Get the lock */ + spin_lock_irqsave(&port->lock, flags); + + /* Update the per-port timeout */ + uart_update_timeout(port, new->c_cflag, baud); + + /* Do our best to flush TX & RX, so we don't loose anything */ + /* But we don't wait indefinitly ! */ + j = 5000000; /* Maximum wait */ + /* FIXME Can't receive chars since set_termios might be called at early + * boot for the console, all stuff is not yet ready to receive at that + * time and that just makes the kernel oops */ + /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */ + while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) && + --j) + udelay(1); + + if (!j) + printk( KERN_ERR "mpc52xx_uart.c: " + "Unable to flush RX & TX fifos in-time in set_termios." + "Some chars may have been lost.\n" ); + + /* Reset the TX & RX */ + out_8(&psc->command,MPC52xx_PSC_RST_RX); + out_8(&psc->command,MPC52xx_PSC_RST_TX); + + /* Send new mode settings */ + out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1); + out_8(&psc->mode,mr1); + out_8(&psc->mode,mr2); + out_8(&psc->ctur,ctr >> 8); + out_8(&psc->ctlr,ctr & 0xff); + + /* Reenable TX & RX */ + out_8(&psc->command,MPC52xx_PSC_TX_ENABLE); + out_8(&psc->command,MPC52xx_PSC_RX_ENABLE); + + /* We're all set, release the lock */ + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char * +mpc52xx_uart_type(struct uart_port *port) +{ + return port->type == PORT_MPC52xx ? "MPC52xx PSC" : NULL; +} + +static void +mpc52xx_uart_release_port(struct uart_port *port) +{ + if (port->flags & UPF_IOREMAP) { /* remapped by us ? */ + iounmap(port->membase); + port->membase = NULL; + } + + release_mem_region(port->mapbase, MPC52xx_PSC_SIZE); +} + +static int +mpc52xx_uart_request_port(struct uart_port *port) +{ + if (port->flags & UPF_IOREMAP) /* Need to remap ? */ + port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE); + + if (!port->membase) + return -EINVAL; + + return request_mem_region(port->mapbase, MPC52xx_PSC_SIZE, + "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY; +} + +static void +mpc52xx_uart_config_port(struct uart_port *port, int flags) +{ + if ( (flags & UART_CONFIG_TYPE) && + (mpc52xx_uart_request_port(port) == 0) ) + port->type = PORT_MPC52xx; +} + +static int +mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if ( ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx ) + return -EINVAL; + + if ( (ser->irq != port->irq) || + (ser->io_type != SERIAL_IO_MEM) || + (ser->baud_base != port->uartclk) || + (ser->iomem_base != (void*)port->mapbase) || + (ser->hub6 != 0 ) ) + return -EINVAL; + + return 0; +} + + +static struct uart_ops mpc52xx_uart_ops = { + .tx_empty = mpc52xx_uart_tx_empty, + .set_mctrl = mpc52xx_uart_set_mctrl, + .get_mctrl = mpc52xx_uart_get_mctrl, + .stop_tx = mpc52xx_uart_stop_tx, + .start_tx = mpc52xx_uart_start_tx, + .send_xchar = mpc52xx_uart_send_xchar, + .stop_rx = mpc52xx_uart_stop_rx, + .enable_ms = mpc52xx_uart_enable_ms, + .break_ctl = mpc52xx_uart_break_ctl, + .startup = mpc52xx_uart_startup, + .shutdown = mpc52xx_uart_shutdown, + .set_termios = mpc52xx_uart_set_termios, +/* .pm = mpc52xx_uart_pm, Not supported yet */ +/* .set_wake = mpc52xx_uart_set_wake, Not supported yet */ + .type = mpc52xx_uart_type, + .release_port = mpc52xx_uart_release_port, + .request_port = mpc52xx_uart_request_port, + .config_port = mpc52xx_uart_config_port, + .verify_port = mpc52xx_uart_verify_port +}; + + +/* ======================================================================== */ +/* Interrupt handling */ +/* ======================================================================== */ + +static inline int +mpc52xx_uart_int_rx_chars(struct uart_port *port, struct pt_regs *regs) +{ + struct tty_struct *tty = port->info->tty; + unsigned char ch; + unsigned short status; + + /* While we can read, do so ! */ + while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) & + MPC52xx_PSC_SR_RXRDY) { + + /* If we are full, just stop reading */ + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + break; + + /* Get the char */ + ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8); + + /* Handle sysreq char */ +#ifdef SUPPORT_SYSRQ + if (uart_handle_sysrq_char(port, ch, regs)) { + port->sysrq = 0; + continue; + } +#endif + + /* Store it */ + *tty->flip.char_buf_ptr = ch; + *tty->flip.flag_buf_ptr = 0; + port->icount.rx++; + + if ( status & (MPC52xx_PSC_SR_PE | + MPC52xx_PSC_SR_FE | + MPC52xx_PSC_SR_RB | + MPC52xx_PSC_SR_OE) ) { + + if (status & MPC52xx_PSC_SR_RB) { + *tty->flip.flag_buf_ptr = TTY_BREAK; + uart_handle_break(port); + } else if (status & MPC52xx_PSC_SR_PE) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (status & MPC52xx_PSC_SR_FE) + *tty->flip.flag_buf_ptr = TTY_FRAME; + if (status & MPC52xx_PSC_SR_OE) { + /* + * Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + if (tty->flip.count < (TTY_FLIPBUF_SIZE-1)) { + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + } + + /* Clear error condition */ + out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT); + + } + + tty->flip.char_buf_ptr++; + tty->flip.flag_buf_ptr++; + tty->flip.count++; + + } + + tty_flip_buffer_push(tty); + + return in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY; +} + +static inline int +mpc52xx_uart_int_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + + /* Process out of band chars */ + if (port->x_char) { + out_8(&PSC(port)->mpc52xx_psc_buffer_8, port->x_char); + port->icount.tx++; + port->x_char = 0; + return 1; + } + + /* Nothing to do ? */ + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mpc52xx_uart_stop_tx(port,0); + return 0; + } + + /* Send chars */ + while (in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXRDY) { + out_8(&PSC(port)->mpc52xx_psc_buffer_8, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Wake up */ + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + /* Maybe we're done after all */ + if (uart_circ_empty(xmit)) { + mpc52xx_uart_stop_tx(port,0); + return 0; + } + + return 1; +} + +static irqreturn_t +mpc52xx_uart_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = (struct uart_port *) dev_id; + unsigned long pass = ISR_PASS_LIMIT; + unsigned int keepgoing; + unsigned short status; + + if ( irq != port->irq ) { + printk( KERN_WARNING + "mpc52xx_uart_int : " \ + "Received wrong int %d. Waiting for %d\n", + irq, port->irq); + return IRQ_NONE; + } + + spin_lock(&port->lock); + + /* While we have stuff to do, we continue */ + do { + /* If we don't find anything to do, we stop */ + keepgoing = 0; + + /* Read status */ + status = in_be16(&PSC(port)->mpc52xx_psc_isr); + status &= port->read_status_mask; + + /* Do we need to receive chars ? */ + /* For this RX interrupts must be on and some chars waiting */ + if ( status & MPC52xx_PSC_IMR_RXRDY ) + keepgoing |= mpc52xx_uart_int_rx_chars(port, regs); + + /* Do we need to send chars ? */ + /* For this, TX must be ready and TX interrupt enabled */ + if ( status & MPC52xx_PSC_IMR_TXRDY ) + keepgoing |= mpc52xx_uart_int_tx_chars(port); + + /* Limit number of iteration */ + if ( !(--pass) ) + keepgoing = 0; + + } while (keepgoing); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + + +/* ======================================================================== */ +/* Console ( if applicable ) */ +/* ======================================================================== */ + +#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE + +static void __init +mpc52xx_console_get_options(struct uart_port *port, + int *baud, int *parity, int *bits, int *flow) +{ + struct mpc52xx_psc __iomem *psc = PSC(port); + unsigned char mr1; + + /* Read the mode registers */ + out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1); + mr1 = in_8(&psc->mode); + + /* CT{U,L}R are write-only ! */ + *baud = __res.bi_baudrate ? + __res.bi_baudrate : CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + + /* Parse them */ + switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) { + case MPC52xx_PSC_MODE_5_BITS: *bits = 5; break; + case MPC52xx_PSC_MODE_6_BITS: *bits = 6; break; + case MPC52xx_PSC_MODE_7_BITS: *bits = 7; break; + case MPC52xx_PSC_MODE_8_BITS: + default: *bits = 8; + } + + if (mr1 & MPC52xx_PSC_MODE_PARNONE) + *parity = 'n'; + else + *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e'; +} + +static void +mpc52xx_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + struct mpc52xx_psc __iomem *psc = PSC(port); + unsigned int i, j; + + /* Disable interrupts */ + out_be16(&psc->mpc52xx_psc_imr, 0); + + /* Wait the TX buffer to be empty */ + j = 5000000; /* Maximum wait */ + while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) && + --j) + udelay(1); + + /* Write all the chars */ + for ( i=0 ; impc52xx_psc_buffer_8, *s); + + /* Line return handling */ + if ( *s++ == '\n' ) + out_8(&psc->mpc52xx_psc_buffer_8, '\r'); + + /* Wait the TX buffer to be empty */ + j = 20000; /* Maximum wait */ + while (!(in_be16(&psc->mpc52xx_psc_status) & + MPC52xx_PSC_SR_TXEMP) && --j) + udelay(1); + } + + /* Restore interrupt state */ + out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask); +} + +static int __init +mpc52xx_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &mpc52xx_uart_ports[co->index]; + + int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM) + return -EINVAL; + + /* Basic port init. Needed since we use some uart_??? func before + * real init for early access */ + spin_lock_init(&port->lock); + port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */ + port->ops = &mpc52xx_uart_ops; + port->mapbase = MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1)); + + /* We ioremap ourself */ + port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE); + if (port->membase == NULL) + return -EINVAL; + + /* Setup the port parameters accoding to options */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + + +extern struct uart_driver mpc52xx_uart_driver; + +static struct console mpc52xx_console = { + .name = "ttyS", + .write = mpc52xx_console_write, + .device = uart_console_device, + .setup = mpc52xx_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, /* Specified on the cmdline (e.g. console=ttyS0 ) */ + .data = &mpc52xx_uart_driver, +}; + + +static int __init +mpc52xx_console_init(void) +{ + register_console(&mpc52xx_console); + return 0; +} + +console_initcall(mpc52xx_console_init); + +#define MPC52xx_PSC_CONSOLE &mpc52xx_console +#else +#define MPC52xx_PSC_CONSOLE NULL +#endif + + +/* ======================================================================== */ +/* UART Driver */ +/* ======================================================================== */ + +static struct uart_driver mpc52xx_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "mpc52xx_psc_uart", + .dev_name = "ttyS", + .devfs_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = MPC52xx_PSC_MAXNUM, + .cons = MPC52xx_PSC_CONSOLE, +}; + + +/* ======================================================================== */ +/* Platform Driver */ +/* ======================================================================== */ + +static int __devinit +mpc52xx_uart_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct resource *res = pdev->resource; + + struct uart_port *port = NULL; + int i, idx, ret; + + /* Check validity & presence */ + idx = pdev->id; + if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM) + return -EINVAL; + + if (!mpc52xx_match_psc_function(idx,"uart")) + return -ENODEV; + + /* Init the port structure */ + port = &mpc52xx_uart_ports[idx]; + + memset(port, 0x00, sizeof(struct uart_port)); + + spin_lock_init(&port->lock); + port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */ + port->fifosize = 255; /* Should be 512 ! But it can't be */ + /* stored in a unsigned char */ + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF | + ( uart_console(port) ? 0 : UPF_IOREMAP ); + port->line = idx; + port->ops = &mpc52xx_uart_ops; + + /* Search for IRQ and mapbase */ + for (i=0 ; inum_resources ; i++, res++) { + if (res->flags & IORESOURCE_MEM) + port->mapbase = res->start; + else if (res->flags & IORESOURCE_IRQ) + port->irq = res->start; + } + if (!port->irq || !port->mapbase) + return -EINVAL; + + /* Add the port to the uart sub-system */ + ret = uart_add_one_port(&mpc52xx_uart_driver, port); + if (!ret) + dev_set_drvdata(dev, (void*)port); + + return ret; +} + +static int +mpc52xx_uart_remove(struct device *dev) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev); + + dev_set_drvdata(dev, NULL); + + if (port) + uart_remove_one_port(&mpc52xx_uart_driver, port); + + return 0; +} + +#ifdef CONFIG_PM +static int +mpc52xx_uart_suspend(struct device *dev, u32 state, u32 level) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev); + + if (sport && level == SUSPEND_DISABLE) + uart_suspend_port(&mpc52xx_uart_driver, port); + + return 0; +} + +static int +mpc52xx_uart_resume(struct device *dev, u32 level) +{ + struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev); + + if (port && level == RESUME_ENABLE) + uart_resume_port(&mpc52xx_uart_driver, port); + + return 0; +} +#endif + +static struct device_driver mpc52xx_uart_platform_driver = { + .name = "mpc52xx-psc", + .bus = &platform_bus_type, + .probe = mpc52xx_uart_probe, + .remove = mpc52xx_uart_remove, +#ifdef CONFIG_PM + .suspend = mpc52xx_uart_suspend, + .resume = mpc52xx_uart_resume, +#endif +}; + + +/* ======================================================================== */ +/* Module */ +/* ======================================================================== */ + +static int __init +mpc52xx_uart_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: MPC52xx PSC driver\n"); + + ret = uart_register_driver(&mpc52xx_uart_driver); + if (ret == 0) { + ret = driver_register(&mpc52xx_uart_platform_driver); + if (ret) + uart_unregister_driver(&mpc52xx_uart_driver); + } + + return ret; +} + +static void __exit +mpc52xx_uart_exit(void) +{ + driver_unregister(&mpc52xx_uart_platform_driver); + uart_unregister_driver(&mpc52xx_uart_driver); +} + + +module_init(mpc52xx_uart_init); +module_exit(mpc52xx_uart_exit); + +MODULE_AUTHOR("Sylvain Munaut "); +MODULE_DESCRIPTION("Freescale MPC52xx PSC UART"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c new file mode 100644 index 000000000000..d0dfc3cf9245 --- /dev/null +++ b/drivers/serial/mpsc.c @@ -0,0 +1,1832 @@ +/* + * drivers/serial/mpsc.c + * + * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240, + * GT64260, MV64340, MV64360, GT96100, ... ). + * + * Author: Mark A. Greer + * + * Based on an old MPSC driver that was in the linuxppc tree. It appears to + * have been created by Chris Zankel (formerly of MontaVista) but there + * is no proper Copyright so I'm not sure. Apparently, parts were also + * taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c + * by Russell King. + * + * 2004 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +/* + * The MPSC interface is much like a typical network controller's interface. + * That is, you set up separate rings of descriptors for transmitting and + * receiving data. There is also a pool of buffers with (one buffer per + * descriptor) that incoming data are dma'd into or outgoing data are dma'd + * out of. + * + * The MPSC requires two other controllers to be able to work. The Baud Rate + * Generator (BRG) provides a clock at programmable frequencies which determines + * the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the + * MPSC and DMA's it into memory or DMA's outgoing data and passes it to the + * MPSC. It is actually the SDMA interrupt that the driver uses to keep the + * transmit and receive "engines" going (i.e., indicate data has been + * transmitted or received). + * + * NOTES: + * + * 1) Some chips have an erratum where several regs cannot be + * read. To work around that, we keep a local copy of those regs in + * 'mpsc_port_info'. + * + * 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr + * accesses system mem with coherency enabled. For that reason, the driver + * assumes that coherency for that ctlr has been disabled. This means + * that when in a cache coherent system, the driver has to manually manage + * the data cache on the areas that it touches because the dma_* macro are + * basically no-ops. + * + * 3) There is an erratum (on PPC) where you can't use the instruction to do + * a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places + * where a DMA_TO_DEVICE/clean would have [otherwise] sufficed. + * + * 4) AFAICT, hardware flow control isn't supported by the controller --MAG. + */ + +#include "mpsc.h" + +/* + * Define how this driver is known to the outside (we've been assigned a + * range on the "Low-density serial ports" major). + */ +#define MPSC_MAJOR 204 +#define MPSC_MINOR_START 44 +#define MPSC_DRIVER_NAME "MPSC" +#define MPSC_DEVFS_NAME "ttymm/" +#define MPSC_DEV_NAME "ttyMM" +#define MPSC_VERSION "1.00" + +static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS]; +static struct mpsc_shared_regs mpsc_shared_regs; + +/* + ****************************************************************************** + * + * Baud Rate Generator Routines (BRG) + * + ****************************************************************************** + */ +static void +mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18); + + if (pi->brg_can_tune) + v &= ~(1 << 25); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); + + writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000, + pi->brg_base + BRG_BTR); + return; +} + +static void +mpsc_brg_enable(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v |= (1 << 16); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); + return; +} + +static void +mpsc_brg_disable(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v &= ~(1 << 16); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); + return; +} + +static inline void +mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud) +{ + /* + * To set the baud, we adjust the CDV field in the BRG_BCR reg. + * From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1. + * However, the input clock is divided by 16 in the MPSC b/c of how + * 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our + * calculation by 16 to account for that. So the real calculation + * that accounts for the way the mpsc is set up is: + * CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1. + */ + u32 cdv = (pi->port.uartclk / (baud << 5)) - 1; + u32 v; + + mpsc_brg_disable(pi); + v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR); + v = (v & 0xffff0000) | (cdv & 0xffff); + + if (pi->mirror_regs) + pi->BRG_BCR_m = v; + writel(v, pi->brg_base + BRG_BCR); + mpsc_brg_enable(pi); + + return; +} + +/* + ****************************************************************************** + * + * Serial DMA Routines (SDMA) + * + ****************************************************************************** + */ + +static void +mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size) +{ + u32 v; + + pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n", + pi->port.line, burst_size); + + burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */ + + if (burst_size < 2) + v = 0x0; /* 1 64-bit word */ + else if (burst_size < 4) + v = 0x1; /* 2 64-bit words */ + else if (burst_size < 8) + v = 0x2; /* 4 64-bit words */ + else + v = 0x3; /* 8 64-bit words */ + + writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12), + pi->sdma_base + SDMA_SDC); + return; +} + +static void +mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size) +{ + pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line, + burst_size); + + writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f, + pi->sdma_base + SDMA_SDC); + mpsc_sdma_burstsize(pi, burst_size); + return; +} + +static inline u32 +mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask) +{ + u32 old, v; + + pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask); + + old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m : + readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + mask &= 0xf; + if (pi->port.line) + mask <<= 8; + v &= ~mask; + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_MASK_m = v; + writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + if (pi->port.line) + old >>= 8; + return old & 0xf; +} + +static inline void +mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask) +{ + u32 v; + + pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask); + + v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m : + readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + + mask &= 0xf; + if (pi->port.line) + mask <<= 8; + v |= mask; + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_MASK_m = v; + writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK); + return; +} + +static inline void +mpsc_sdma_intr_ack(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line); + + if (pi->mirror_regs) + pi->shared_regs->SDMA_INTR_CAUSE_m = 0; + writel(0, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE); + return; +} + +static inline void +mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, struct mpsc_rx_desc *rxre_p) +{ + pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n", + pi->port.line, (u32) rxre_p); + + writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP); + return; +} + +static inline void +mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, struct mpsc_tx_desc *txre_p) +{ + writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP); + writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP); + return; +} + +static inline void +mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val) +{ + u32 v; + + v = readl(pi->sdma_base + SDMA_SDCM); + if (val) + v |= val; + else + v = 0; + wmb(); + writel(v, pi->sdma_base + SDMA_SDCM); + wmb(); + return; +} + +static inline uint +mpsc_sdma_tx_active(struct mpsc_port_info *pi) +{ + return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD; +} + +static inline void +mpsc_sdma_start_tx(struct mpsc_port_info *pi) +{ + struct mpsc_tx_desc *txre, *txre_p; + + /* If tx isn't running & there's a desc ready to go, start it */ + if (!mpsc_sdma_tx_active(pi)) { + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + + if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) { + txre_p = (struct mpsc_tx_desc *)(pi->txr_p + + (pi->txr_tail * + MPSC_TXRE_SIZE)); + + mpsc_sdma_set_tx_ring(pi, txre_p); + mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD); + } + } + + return; +} + +static inline void +mpsc_sdma_stop(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line); + + /* Abort any SDMA transfers */ + mpsc_sdma_cmd(pi, 0); + mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT); + + /* Clear the SDMA current and first TX and RX pointers */ + mpsc_sdma_set_tx_ring(pi, 0); + mpsc_sdma_set_rx_ring(pi, 0); + + /* Disable interrupts */ + mpsc_sdma_intr_mask(pi, 0xf); + mpsc_sdma_intr_ack(pi); + + return; +} + +/* + ****************************************************************************** + * + * Multi-Protocol Serial Controller Routines (MPSC) + * + ****************************************************************************** + */ + +static void +mpsc_hw_init(struct mpsc_port_info *pi) +{ + u32 v; + + pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line); + + /* Set up clock routing */ + if (pi->mirror_regs) { + v = pi->shared_regs->MPSC_MRR_m; + v &= ~0x1c7; + pi->shared_regs->MPSC_MRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); + + v = pi->shared_regs->MPSC_RCRR_m; + v = (v & ~0xf0f) | 0x100; + pi->shared_regs->MPSC_RCRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + + v = pi->shared_regs->MPSC_TCRR_m; + v = (v & ~0xf0f) | 0x100; + pi->shared_regs->MPSC_TCRR_m = v; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + } + else { + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR); + v &= ~0x1c7; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR); + + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + v = (v & ~0xf0f) | 0x100; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR); + + v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + v = (v & ~0xf0f) | 0x100; + writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR); + } + + /* Put MPSC in UART mode & enabel Tx/Rx egines */ + writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL); + + /* No preamble, 16x divider, low-latency, */ + writel(0x04400400, pi->mpsc_base + MPSC_MMCRH); + + if (pi->mirror_regs) { + pi->MPSC_CHR_1_m = 0; + pi->MPSC_CHR_2_m = 0; + } + writel(0, pi->mpsc_base + MPSC_CHR_1); + writel(0, pi->mpsc_base + MPSC_CHR_2); + writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3); + writel(0, pi->mpsc_base + MPSC_CHR_4); + writel(0, pi->mpsc_base + MPSC_CHR_5); + writel(0, pi->mpsc_base + MPSC_CHR_6); + writel(0, pi->mpsc_base + MPSC_CHR_7); + writel(0, pi->mpsc_base + MPSC_CHR_8); + writel(0, pi->mpsc_base + MPSC_CHR_9); + writel(0, pi->mpsc_base + MPSC_CHR_10); + + return; +} + +static inline void +mpsc_enter_hunt(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line); + + if (pi->mirror_regs) { + writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH, + pi->mpsc_base + MPSC_CHR_2); + /* Erratum prevents reading CHR_2 so just delay for a while */ + udelay(100); + } + else { + writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH, + pi->mpsc_base + MPSC_CHR_2); + + while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH) + udelay(10); + } + + return; +} + +static inline void +mpsc_freeze(struct mpsc_port_info *pi) +{ + u32 v; + + pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v |= MPSC_MPCR_FRZ; + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); + return; +} + +static inline void +mpsc_unfreeze(struct mpsc_port_info *pi) +{ + u32 v; + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v &= ~MPSC_MPCR_FRZ; + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); + + pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line); + return; +} + +static inline void +mpsc_set_char_length(struct mpsc_port_info *pi, u32 len) +{ + u32 v; + + pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12); + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); + return; +} + +static inline void +mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len) +{ + u32 v; + + pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n", + pi->port.line, len); + + v = (pi->mirror_regs) ? pi->MPSC_MPCR_m : + readl(pi->mpsc_base + MPSC_MPCR); + + v = (v & ~(1 << 14)) | ((len & 0x1) << 14); + + if (pi->mirror_regs) + pi->MPSC_MPCR_m = v; + writel(v, pi->mpsc_base + MPSC_MPCR); + return; +} + +static inline void +mpsc_set_parity(struct mpsc_port_info *pi, u32 p) +{ + u32 v; + + pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p); + + v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m : + readl(pi->mpsc_base + MPSC_CHR_2); + + p &= 0x3; + v = (v & ~0xc000c) | (p << 18) | (p << 2); + + if (pi->mirror_regs) + pi->MPSC_CHR_2_m = v; + writel(v, pi->mpsc_base + MPSC_CHR_2); + return; +} + +/* + ****************************************************************************** + * + * Driver Init Routines + * + ****************************************************************************** + */ + +static void +mpsc_init_hw(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line); + + mpsc_brg_init(pi, pi->brg_clk_src); + mpsc_brg_enable(pi); + mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */ + mpsc_sdma_stop(pi); + mpsc_hw_init(pi); + + return; +} + +static int +mpsc_alloc_ring_mem(struct mpsc_port_info *pi) +{ + int rc = 0; + static void mpsc_free_ring_mem(struct mpsc_port_info *pi); + + pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n", + pi->port.line); + + if (!pi->dma_region) { + if (!dma_supported(pi->port.dev, 0xffffffff)) { + printk(KERN_ERR "MPSC: Inadequate DMA support\n"); + rc = -ENXIO; + } + else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev, + MPSC_DMA_ALLOC_SIZE, &pi->dma_region_p, GFP_KERNEL)) + == NULL) { + + printk(KERN_ERR "MPSC: Can't alloc Desc region\n"); + rc = -ENOMEM; + } + } + + return rc; +} + +static void +mpsc_free_ring_mem(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line); + + if (pi->dma_region) { + dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE, + pi->dma_region, pi->dma_region_p); + pi->dma_region = NULL; + pi->dma_region_p = (dma_addr_t) NULL; + } + + return; +} + +static void +mpsc_init_rings(struct mpsc_port_info *pi) +{ + struct mpsc_rx_desc *rxre; + struct mpsc_tx_desc *txre; + dma_addr_t dp, dp_p; + u8 *bp, *bp_p; + int i; + + pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line); + + BUG_ON(pi->dma_region == NULL); + + memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE); + + /* + * Descriptors & buffers are multiples of cacheline size and must be + * cacheline aligned. + */ + dp = ALIGN((u32) pi->dma_region, dma_get_cache_alignment()); + dp_p = ALIGN((u32) pi->dma_region_p, dma_get_cache_alignment()); + + /* + * Partition dma region into rx ring descriptor, rx buffers, + * tx ring descriptors, and tx buffers. + */ + pi->rxr = dp; + pi->rxr_p = dp_p; + dp += MPSC_RXR_SIZE; + dp_p += MPSC_RXR_SIZE; + + pi->rxb = (u8 *) dp; + pi->rxb_p = (u8 *) dp_p; + dp += MPSC_RXB_SIZE; + dp_p += MPSC_RXB_SIZE; + + pi->rxr_posn = 0; + + pi->txr = dp; + pi->txr_p = dp_p; + dp += MPSC_TXR_SIZE; + dp_p += MPSC_TXR_SIZE; + + pi->txb = (u8 *) dp; + pi->txb_p = (u8 *) dp_p; + + pi->txr_head = 0; + pi->txr_tail = 0; + + /* Init rx ring descriptors */ + dp = pi->rxr; + dp_p = pi->rxr_p; + bp = pi->rxb; + bp_p = pi->rxb_p; + + for (i = 0; i < MPSC_RXR_ENTRIES; i++) { + rxre = (struct mpsc_rx_desc *)dp; + + rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE); + rxre->bytecnt = cpu_to_be16(0); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | + SDMA_DESC_CMDSTAT_EI | + SDMA_DESC_CMDSTAT_F | + SDMA_DESC_CMDSTAT_L); + rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE); + rxre->buf_ptr = cpu_to_be32(bp_p); + + dp += MPSC_RXRE_SIZE; + dp_p += MPSC_RXRE_SIZE; + bp += MPSC_RXBE_SIZE; + bp_p += MPSC_RXBE_SIZE; + } + rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */ + + /* Init tx ring descriptors */ + dp = pi->txr; + dp_p = pi->txr_p; + bp = pi->txb; + bp_p = pi->txb_p; + + for (i = 0; i < MPSC_TXR_ENTRIES; i++) { + txre = (struct mpsc_tx_desc *)dp; + + txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE); + txre->buf_ptr = cpu_to_be32(bp_p); + + dp += MPSC_TXRE_SIZE; + dp_p += MPSC_TXRE_SIZE; + bp += MPSC_TXBE_SIZE; + bp_p += MPSC_TXBE_SIZE; + } + txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */ + + dma_cache_sync((void *) pi->dma_region, MPSC_DMA_ALLOC_SIZE, + DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)pi->dma_region, + (ulong)pi->dma_region + MPSC_DMA_ALLOC_SIZE); +#endif + + return; +} + +static void +mpsc_uninit_rings(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line); + + BUG_ON(pi->dma_region == NULL); + + pi->rxr = 0; + pi->rxr_p = 0; + pi->rxb = NULL; + pi->rxb_p = NULL; + pi->rxr_posn = 0; + + pi->txr = 0; + pi->txr_p = 0; + pi->txb = NULL; + pi->txb_p = NULL; + pi->txr_head = 0; + pi->txr_tail = 0; + + return; +} + +static int +mpsc_make_ready(struct mpsc_port_info *pi) +{ + int rc; + + pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line); + + if (!pi->ready) { + mpsc_init_hw(pi); + if ((rc = mpsc_alloc_ring_mem(pi))) + return rc; + mpsc_init_rings(pi); + pi->ready = 1; + } + + return 0; +} + +/* + ****************************************************************************** + * + * Interrupt Handling Routines + * + ****************************************************************************** + */ + +static inline int +mpsc_rx_intr(struct mpsc_port_info *pi, struct pt_regs *regs) +{ + struct mpsc_rx_desc *rxre; + struct tty_struct *tty = pi->port.info->tty; + u32 cmdstat, bytes_in, i; + int rc = 0; + u8 *bp; + char flag = TTY_NORMAL; + static void mpsc_start_rx(struct mpsc_port_info *pi); + + pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line); + + rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE)); + + dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* + * Loop through Rx descriptors handling ones that have been completed. + */ + while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) & SDMA_DESC_CMDSTAT_O)){ + bytes_in = be16_to_cpu(rxre->bytecnt); + + /* Following use of tty struct directly is deprecated */ + if (unlikely((tty->flip.count + bytes_in) >= TTY_FLIPBUF_SIZE)){ + if (tty->low_latency) + tty_flip_buffer_push(tty); + /* + * If this failed then we will throw awa the bytes + * but mst do so to clear interrupts. + */ + } + + bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE); + dma_cache_sync((void *) bp, MPSC_RXBE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)bp, + (ulong)bp + MPSC_RXBE_SIZE); +#endif + + /* + * Other than for parity error, the manual provides little + * info on what data will be in a frame flagged by any of + * these errors. For parity error, it is the last byte in + * the buffer that had the error. As for the rest, I guess + * we'll assume there is no data in the buffer. + * If there is...it gets lost. + */ + if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR | + SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) { + + pi->port.icount.rx++; + + if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */ + pi->port.icount.brk++; + + if (uart_handle_break(&pi->port)) + goto next_frame; + } + else if (cmdstat & SDMA_DESC_CMDSTAT_FR)/* Framing */ + pi->port.icount.frame++; + else if (cmdstat & SDMA_DESC_CMDSTAT_OR) /* Overrun */ + pi->port.icount.overrun++; + + cmdstat &= pi->port.read_status_mask; + + if (cmdstat & SDMA_DESC_CMDSTAT_BR) + flag = TTY_BREAK; + else if (cmdstat & SDMA_DESC_CMDSTAT_FR) + flag = TTY_FRAME; + else if (cmdstat & SDMA_DESC_CMDSTAT_OR) + flag = TTY_OVERRUN; + else if (cmdstat & SDMA_DESC_CMDSTAT_PE) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(&pi->port, *bp, regs)) { + bp++; + bytes_in--; + goto next_frame; + } + + if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR | + SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) && + !(cmdstat & pi->port.ignore_status_mask)) + + tty_insert_flip_char(tty, *bp, flag); + else { + for (i=0; iport.icount.rx += bytes_in; + } + +next_frame: + rxre->bytecnt = cpu_to_be16(0); + wmb(); + rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | + SDMA_DESC_CMDSTAT_EI | + SDMA_DESC_CMDSTAT_F | + SDMA_DESC_CMDSTAT_L); + wmb(); + dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + /* Advance to next descriptor */ + pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1); + rxre = (struct mpsc_rx_desc *)(pi->rxr + + (pi->rxr_posn * MPSC_RXRE_SIZE)); + dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)rxre, + (ulong)rxre + MPSC_RXRE_SIZE); +#endif + + rc = 1; + } + + /* Restart rx engine, if its stopped */ + if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0) + mpsc_start_rx(pi); + + tty_flip_buffer_push(tty); + return rc; +} + +static inline void +mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr) +{ + struct mpsc_tx_desc *txre; + + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_head * MPSC_TXRE_SIZE)); + + txre->bytecnt = cpu_to_be16(count); + txre->shadow = txre->bytecnt; + wmb(); /* ensure cmdstat is last field updated */ + txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F | + SDMA_DESC_CMDSTAT_L | ((intr) ? + SDMA_DESC_CMDSTAT_EI + : 0)); + wmb(); + dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + + return; +} + +static inline void +mpsc_copy_tx_data(struct mpsc_port_info *pi) +{ + struct circ_buf *xmit = &pi->port.info->xmit; + u8 *bp; + u32 i; + + /* Make sure the desc ring isn't full */ + while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) < + (MPSC_TXR_ENTRIES - 1)) { + if (pi->port.x_char) { + /* + * Ideally, we should use the TCS field in + * CHR_1 to put the x_char out immediately but + * errata prevents us from being able to read + * CHR_2 to know that its safe to write to + * CHR_1. Instead, just put it in-band with + * all the other Tx data. + */ + bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + *bp = pi->port.x_char; + pi->port.x_char = 0; + i = 1; + } + else if (!uart_circ_empty(xmit) && !uart_tx_stopped(&pi->port)){ + i = min((u32) MPSC_TXBE_SIZE, + (u32) uart_circ_chars_pending(xmit)); + i = min(i, (u32) CIRC_CNT_TO_END(xmit->head, xmit->tail, + UART_XMIT_SIZE)); + bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + memcpy(bp, &xmit->buf[xmit->tail], i); + xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&pi->port); + } + else /* All tx data copied into ring bufs */ + return; + + dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)bp, + (ulong)bp + MPSC_TXBE_SIZE); +#endif + mpsc_setup_tx_desc(pi, i, 1); + + /* Advance to next descriptor */ + pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); + } + + return; +} + +static inline int +mpsc_tx_intr(struct mpsc_port_info *pi) +{ + struct mpsc_tx_desc *txre; + int rc = 0; + + if (!mpsc_sdma_tx_active(pi)) { + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + + dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + + while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) { + rc = 1; + pi->port.icount.tx += be16_to_cpu(txre->bytecnt); + pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1); + + /* If no more data to tx, fall out of loop */ + if (pi->txr_head == pi->txr_tail) + break; + + txre = (struct mpsc_tx_desc *)(pi->txr + + (pi->txr_tail * MPSC_TXRE_SIZE)); + dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, + DMA_FROM_DEVICE); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + invalidate_dcache_range((ulong)txre, + (ulong)txre + MPSC_TXRE_SIZE); +#endif + } + + mpsc_copy_tx_data(pi); + mpsc_sdma_start_tx(pi); /* start next desc if ready */ + } + + return rc; +} + +/* + * This is the driver's interrupt handler. To avoid a race, we first clear + * the interrupt, then handle any completed Rx/Tx descriptors. When done + * handling those descriptors, we restart the Rx/Tx engines if they're stopped. + */ +static irqreturn_t +mpsc_sdma_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct mpsc_port_info *pi = dev_id; + ulong iflags; + int rc = IRQ_NONE; + + pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line); + + spin_lock_irqsave(&pi->port.lock, iflags); + mpsc_sdma_intr_ack(pi); + if (mpsc_rx_intr(pi, regs)) + rc = IRQ_HANDLED; + if (mpsc_tx_intr(pi)) + rc = IRQ_HANDLED; + spin_unlock_irqrestore(&pi->port.lock, iflags); + + pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line); + return rc; +} + +/* + ****************************************************************************** + * + * serial_core.c Interface routines + * + ****************************************************************************** + */ +static uint +mpsc_tx_empty(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + ulong iflags; + uint rc; + + spin_lock_irqsave(&pi->port.lock, iflags); + rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT; + spin_unlock_irqrestore(&pi->port.lock, iflags); + + return rc; +} + +static void +mpsc_set_mctrl(struct uart_port *port, uint mctrl) +{ + /* Have no way to set modem control lines AFAICT */ + return; +} + +static uint +mpsc_get_mctrl(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 mflags, status; + ulong iflags; + + spin_lock_irqsave(&pi->port.lock, iflags); + status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m : + readl(pi->mpsc_base + MPSC_CHR_10); + spin_unlock_irqrestore(&pi->port.lock, iflags); + + mflags = 0; + if (status & 0x1) + mflags |= TIOCM_CTS; + if (status & 0x2) + mflags |= TIOCM_CAR; + + return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */ +} + +static void +mpsc_stop_tx(struct uart_port *port, uint tty_start) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_stop_tx[%d]: tty_start: %d\n", port->line, tty_start); + + mpsc_freeze(pi); + return; +} + +static void +mpsc_start_tx(struct uart_port *port, uint tty_start) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + mpsc_unfreeze(pi); + mpsc_copy_tx_data(pi); + mpsc_sdma_start_tx(pi); + + pr_debug("mpsc_start_tx[%d]: tty_start: %d\n", port->line, tty_start); + return; +} + +static void +mpsc_start_rx(struct mpsc_port_info *pi) +{ + pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line); + + if (pi->rcv_data) { + mpsc_enter_hunt(pi); + mpsc_sdma_cmd(pi, SDMA_SDCM_ERD); + } + return; +} + +static void +mpsc_stop_rx(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line); + + mpsc_sdma_cmd(pi, SDMA_SDCM_AR); + return; +} + +static void +mpsc_enable_ms(struct uart_port *port) +{ + return; /* Not supported */ +} + +static void +mpsc_break_ctl(struct uart_port *port, int ctl) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + ulong flags; + u32 v; + + v = ctl ? 0x00ff0000 : 0; + + spin_lock_irqsave(&pi->port.lock, flags); + if (pi->mirror_regs) + pi->MPSC_CHR_1_m = v; + writel(v, pi->mpsc_base + MPSC_CHR_1); + spin_unlock_irqrestore(&pi->port.lock, flags); + + return; +} + +static int +mpsc_startup(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 flag = 0; + int rc; + + pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n", + port->line, pi->port.irq); + + if ((rc = mpsc_make_ready(pi)) == 0) { + /* Setup IRQ handler */ + mpsc_sdma_intr_ack(pi); + + /* If irq's are shared, need to set flag */ + if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq) + flag = SA_SHIRQ; + + if (request_irq(pi->port.irq, mpsc_sdma_intr, flag, + "mpsc/sdma", pi)) + printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n", + pi->port.irq); + + mpsc_sdma_intr_unmask(pi, 0xf); + mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p + + (pi->rxr_posn * MPSC_RXRE_SIZE))); + } + + return rc; +} + +static void +mpsc_shutdown(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + static void mpsc_release_port(struct uart_port *port); + + pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line); + + mpsc_sdma_stop(pi); + free_irq(pi->port.irq, pi); + return; +} + +static void +mpsc_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + u32 baud; + ulong flags; + u32 chr_bits, stop_bits, par; + + pi->c_iflag = termios->c_iflag; + pi->c_cflag = termios->c_cflag; + + switch (termios->c_cflag & CSIZE) { + case CS5: + chr_bits = MPSC_MPCR_CL_5; + break; + case CS6: + chr_bits = MPSC_MPCR_CL_6; + break; + case CS7: + chr_bits = MPSC_MPCR_CL_7; + break; + case CS8: + default: + chr_bits = MPSC_MPCR_CL_8; + break; + } + + if (termios->c_cflag & CSTOPB) + stop_bits = MPSC_MPCR_SBL_2; + else + stop_bits = MPSC_MPCR_SBL_1; + + par = MPSC_CHR_2_PAR_EVEN; + if (termios->c_cflag & PARENB) + if (termios->c_cflag & PARODD) + par = MPSC_CHR_2_PAR_ODD; +#ifdef CMSPAR + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + par = MPSC_CHR_2_PAR_MARK; + else + par = MPSC_CHR_2_PAR_SPACE; + } +#endif + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk); + + spin_lock_irqsave(&pi->port.lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + + mpsc_set_char_length(pi, chr_bits); + mpsc_set_stop_bit_length(pi, stop_bits); + mpsc_set_parity(pi, par); + mpsc_set_baudrate(pi, baud); + + /* Characters/events to read */ + pi->rcv_data = 1; + pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR; + + if (termios->c_iflag & INPCK) + pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE | + SDMA_DESC_CMDSTAT_FR; + + if (termios->c_iflag & (BRKINT | PARMRK)) + pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR; + + /* Characters/events to ignore */ + pi->port.ignore_status_mask = 0; + + if (termios->c_iflag & IGNPAR) + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE | + SDMA_DESC_CMDSTAT_FR; + + if (termios->c_iflag & IGNBRK) { + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR; + + if (termios->c_iflag & IGNPAR) + pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR; + } + + /* Ignore all chars if CREAD not set */ + if (!(termios->c_cflag & CREAD)) + pi->rcv_data = 0; + else + mpsc_start_rx(pi); + + spin_unlock_irqrestore(&pi->port.lock, flags); + return; +} + +static const char * +mpsc_type(struct uart_port *port) +{ + pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME); + return MPSC_DRIVER_NAME; +} + +static int +mpsc_request_port(struct uart_port *port) +{ + /* Should make chip/platform specific call */ + return 0; +} + +static void +mpsc_release_port(struct uart_port *port) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + + if (pi->ready) { + mpsc_uninit_rings(pi); + mpsc_free_ring_mem(pi); + pi->ready = 0; + } + + return; +} + +static void +mpsc_config_port(struct uart_port *port, int flags) +{ + return; +} + +static int +mpsc_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct mpsc_port_info *pi = (struct mpsc_port_info *)port; + int rc = 0; + + pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line); + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC) + rc = -EINVAL; + else if (pi->port.irq != ser->irq) + rc = -EINVAL; + else if (ser->io_type != SERIAL_IO_MEM) + rc = -EINVAL; + else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */ + rc = -EINVAL; + else if ((void *)pi->port.mapbase != ser->iomem_base) + rc = -EINVAL; + else if (pi->port.iobase != ser->port) + rc = -EINVAL; + else if (ser->hub6 != 0) + rc = -EINVAL; + + return rc; +} + +static struct uart_ops mpsc_pops = { + .tx_empty = mpsc_tx_empty, + .set_mctrl = mpsc_set_mctrl, + .get_mctrl = mpsc_get_mctrl, + .stop_tx = mpsc_stop_tx, + .start_tx = mpsc_start_tx, + .stop_rx = mpsc_stop_rx, + .enable_ms = mpsc_enable_ms, + .break_ctl = mpsc_break_ctl, + .startup = mpsc_startup, + .shutdown = mpsc_shutdown, + .set_termios = mpsc_set_termios, + .type = mpsc_type, + .release_port = mpsc_release_port, + .request_port = mpsc_request_port, + .config_port = mpsc_config_port, + .verify_port = mpsc_verify_port, +}; + +/* + ****************************************************************************** + * + * Console Interface Routines + * + ****************************************************************************** + */ + +#ifdef CONFIG_SERIAL_MPSC_CONSOLE +static void +mpsc_console_write(struct console *co, const char *s, uint count) +{ + struct mpsc_port_info *pi = &mpsc_ports[co->index]; + u8 *bp, *dp, add_cr = 0; + int i; + + while (mpsc_sdma_tx_active(pi)) + udelay(100); + + while (count > 0) { + bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE); + + for (i = 0; i < MPSC_TXBE_SIZE; i++) { + if (count == 0) + break; + + if (add_cr) { + *(dp++) = '\r'; + add_cr = 0; + } + else { + *(dp++) = *s; + + if (*(s++) == '\n') { /* add '\r' after '\n' */ + add_cr = 1; + count++; + } + } + + count--; + } + + dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL); +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */ + flush_dcache_range((ulong)bp, + (ulong)bp + MPSC_TXBE_SIZE); +#endif + mpsc_setup_tx_desc(pi, i, 0); + pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1); + mpsc_sdma_start_tx(pi); + + while (mpsc_sdma_tx_active(pi)) + udelay(100); + + pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1); + } + + return; +} + +static int __init +mpsc_console_setup(struct console *co, char *options) +{ + struct mpsc_port_info *pi; + int baud, bits, parity, flow; + + pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options); + + if (co->index >= MPSC_NUM_CTLRS) + co->index = 0; + + pi = &mpsc_ports[co->index]; + + baud = pi->default_baud; + bits = pi->default_bits; + parity = pi->default_parity; + flow = pi->default_flow; + + if (!pi->port.ops) + return -ENODEV; + + spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */ + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&pi->port, co, baud, parity, bits, flow); +} + +extern struct uart_driver mpsc_reg; +static struct console mpsc_console = { + .name = MPSC_DEV_NAME, + .write = mpsc_console_write, + .device = uart_console_device, + .setup = mpsc_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mpsc_reg, +}; + +static int __init +mpsc_late_console_init(void) +{ + pr_debug("mpsc_late_console_init: Enter\n"); + + if (!(mpsc_console.flags & CON_ENABLED)) + register_console(&mpsc_console); + return 0; +} + +late_initcall(mpsc_late_console_init); + +#define MPSC_CONSOLE &mpsc_console +#else +#define MPSC_CONSOLE NULL +#endif +/* + ****************************************************************************** + * + * Dummy Platform Driver to extract & map shared register regions + * + ****************************************************************************** + */ +static void +mpsc_resource_err(char *s) +{ + printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s); + return; +} + +static int +mpsc_shared_map_regs(struct platform_device *pd) +{ + struct resource *r; + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_ROUTING_BASE_ORDER)) && request_mem_region(r->start, + MPSC_ROUTING_REG_BLOCK_SIZE, "mpsc_routing_regs")) { + + mpsc_shared_regs.mpsc_routing_base = ioremap(r->start, + MPSC_ROUTING_REG_BLOCK_SIZE); + mpsc_shared_regs.mpsc_routing_base_p = r->start; + } + else { + mpsc_resource_err("MPSC routing base"); + return -ENOMEM; + } + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_SDMA_INTR_BASE_ORDER)) && request_mem_region(r->start, + MPSC_SDMA_INTR_REG_BLOCK_SIZE, "sdma_intr_regs")) { + + mpsc_shared_regs.sdma_intr_base = ioremap(r->start, + MPSC_SDMA_INTR_REG_BLOCK_SIZE); + mpsc_shared_regs.sdma_intr_base_p = r->start; + } + else { + iounmap(mpsc_shared_regs.mpsc_routing_base); + release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, + MPSC_ROUTING_REG_BLOCK_SIZE); + mpsc_resource_err("SDMA intr base"); + return -ENOMEM; + } + + return 0; +} + +static void +mpsc_shared_unmap_regs(void) +{ + if (!mpsc_shared_regs.mpsc_routing_base) { + iounmap(mpsc_shared_regs.mpsc_routing_base); + release_mem_region(mpsc_shared_regs.mpsc_routing_base_p, + MPSC_ROUTING_REG_BLOCK_SIZE); + } + if (!mpsc_shared_regs.sdma_intr_base) { + iounmap(mpsc_shared_regs.sdma_intr_base); + release_mem_region(mpsc_shared_regs.sdma_intr_base_p, + MPSC_SDMA_INTR_REG_BLOCK_SIZE); + } + + mpsc_shared_regs.mpsc_routing_base = 0; + mpsc_shared_regs.sdma_intr_base = 0; + + mpsc_shared_regs.mpsc_routing_base_p = 0; + mpsc_shared_regs.sdma_intr_base_p = 0; + + return; +} + +static int +mpsc_shared_drv_probe(struct device *dev) +{ + struct platform_device *pd = to_platform_device(dev); + struct mpsc_shared_pdata *pdata; + int rc = -ENODEV; + + if (pd->id == 0) { + if (!(rc = mpsc_shared_map_regs(pd))) { + pdata = (struct mpsc_shared_pdata *)dev->platform_data; + + mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val; + mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val; + mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val; + mpsc_shared_regs.SDMA_INTR_CAUSE_m = + pdata->intr_cause_val; + mpsc_shared_regs.SDMA_INTR_MASK_m = + pdata->intr_mask_val; + + rc = 0; + } + } + + return rc; +} + +static int +mpsc_shared_drv_remove(struct device *dev) +{ + struct platform_device *pd = to_platform_device(dev); + int rc = -ENODEV; + + if (pd->id == 0) { + mpsc_shared_unmap_regs(); + mpsc_shared_regs.MPSC_MRR_m = 0; + mpsc_shared_regs.MPSC_RCRR_m = 0; + mpsc_shared_regs.MPSC_TCRR_m = 0; + mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0; + mpsc_shared_regs.SDMA_INTR_MASK_m = 0; + rc = 0; + } + + return rc; +} + +static struct device_driver mpsc_shared_driver = { + .name = MPSC_SHARED_NAME, + .bus = &platform_bus_type, + .probe = mpsc_shared_drv_probe, + .remove = mpsc_shared_drv_remove, +}; + +/* + ****************************************************************************** + * + * Driver Interface Routines + * + ****************************************************************************** + */ +static struct uart_driver mpsc_reg = { + .owner = THIS_MODULE, + .driver_name = MPSC_DRIVER_NAME, + .devfs_name = MPSC_DEVFS_NAME, + .dev_name = MPSC_DEV_NAME, + .major = MPSC_MAJOR, + .minor = MPSC_MINOR_START, + .nr = MPSC_NUM_CTLRS, + .cons = MPSC_CONSOLE, +}; + +static int +mpsc_drv_map_regs(struct mpsc_port_info *pi, struct platform_device *pd) +{ + struct resource *r; + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) && + request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, "mpsc_regs")){ + + pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE); + pi->mpsc_base_p = r->start; + } + else { + mpsc_resource_err("MPSC base"); + return -ENOMEM; + } + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, + MPSC_SDMA_BASE_ORDER)) && request_mem_region(r->start, + MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) { + + pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE); + pi->sdma_base_p = r->start; + } + else { + mpsc_resource_err("SDMA base"); + return -ENOMEM; + } + + if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER)) + && request_mem_region(r->start, MPSC_BRG_REG_BLOCK_SIZE, + "brg_regs")) { + + pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE); + pi->brg_base_p = r->start; + } + else { + mpsc_resource_err("BRG base"); + return -ENOMEM; + } + + return 0; +} + +static void +mpsc_drv_unmap_regs(struct mpsc_port_info *pi) +{ + if (!pi->mpsc_base) { + iounmap(pi->mpsc_base); + release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE); + } + if (!pi->sdma_base) { + iounmap(pi->sdma_base); + release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE); + } + if (!pi->brg_base) { + iounmap(pi->brg_base); + release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE); + } + + pi->mpsc_base = 0; + pi->sdma_base = 0; + pi->brg_base = 0; + + pi->mpsc_base_p = 0; + pi->sdma_base_p = 0; + pi->brg_base_p = 0; + + return; +} + +static void +mpsc_drv_get_platform_data(struct mpsc_port_info *pi, + struct platform_device *pd, int num) +{ + struct mpsc_pdata *pdata; + + pdata = (struct mpsc_pdata *)pd->dev.platform_data; + + pi->port.uartclk = pdata->brg_clk_freq; + pi->port.iotype = UPIO_MEM; + pi->port.line = num; + pi->port.type = PORT_MPSC; + pi->port.fifosize = MPSC_TXBE_SIZE; + pi->port.membase = pi->mpsc_base; + pi->port.mapbase = (ulong)pi->mpsc_base; + pi->port.ops = &mpsc_pops; + + pi->mirror_regs = pdata->mirror_regs; + pi->cache_mgmt = pdata->cache_mgmt; + pi->brg_can_tune = pdata->brg_can_tune; + pi->brg_clk_src = pdata->brg_clk_src; + pi->mpsc_max_idle = pdata->max_idle; + pi->default_baud = pdata->default_baud; + pi->default_bits = pdata->default_bits; + pi->default_parity = pdata->default_parity; + pi->default_flow = pdata->default_flow; + + /* Initial values of mirrored regs */ + pi->MPSC_CHR_1_m = pdata->chr_1_val; + pi->MPSC_CHR_2_m = pdata->chr_2_val; + pi->MPSC_CHR_10_m = pdata->chr_10_val; + pi->MPSC_MPCR_m = pdata->mpcr_val; + pi->BRG_BCR_m = pdata->bcr_val; + + pi->shared_regs = &mpsc_shared_regs; + + pi->port.irq = platform_get_irq(pd, 0); + + return; +} + +static int +mpsc_drv_probe(struct device *dev) +{ + struct platform_device *pd = to_platform_device(dev); + struct mpsc_port_info *pi; + int rc = -ENODEV; + + pr_debug("mpsc_drv_probe: Adding MPSC %d\n", pd->id); + + if (pd->id < MPSC_NUM_CTLRS) { + pi = &mpsc_ports[pd->id]; + + if (!(rc = mpsc_drv_map_regs(pi, pd))) { + mpsc_drv_get_platform_data(pi, pd, pd->id); + + if (!(rc = mpsc_make_ready(pi))) + if (!(rc = uart_add_one_port(&mpsc_reg, + &pi->port))) + rc = 0; + else { + mpsc_release_port( + (struct uart_port *)pi); + mpsc_drv_unmap_regs(pi); + } + else + mpsc_drv_unmap_regs(pi); + } + } + + return rc; +} + +static int +mpsc_drv_remove(struct device *dev) +{ + struct platform_device *pd = to_platform_device(dev); + + pr_debug("mpsc_drv_exit: Removing MPSC %d\n", pd->id); + + if (pd->id < MPSC_NUM_CTLRS) { + uart_remove_one_port(&mpsc_reg, &mpsc_ports[pd->id].port); + mpsc_release_port((struct uart_port *)&mpsc_ports[pd->id].port); + mpsc_drv_unmap_regs(&mpsc_ports[pd->id]); + return 0; + } + else + return -ENODEV; +} + +static struct device_driver mpsc_driver = { + .name = MPSC_CTLR_NAME, + .bus = &platform_bus_type, + .probe = mpsc_drv_probe, + .remove = mpsc_drv_remove, +}; + +static int __init +mpsc_drv_init(void) +{ + int rc; + + printk(KERN_INFO "Serial: MPSC driver $Revision: 1.00 $\n"); + + memset(mpsc_ports, 0, sizeof(mpsc_ports)); + memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); + + if (!(rc = uart_register_driver(&mpsc_reg))) { + if (!(rc = driver_register(&mpsc_shared_driver))) { + if ((rc = driver_register(&mpsc_driver))) { + driver_unregister(&mpsc_shared_driver); + uart_unregister_driver(&mpsc_reg); + } + } + else + uart_unregister_driver(&mpsc_reg); + } + + return rc; + +} + +static void __exit +mpsc_drv_exit(void) +{ + driver_unregister(&mpsc_driver); + driver_unregister(&mpsc_shared_driver); + uart_unregister_driver(&mpsc_reg); + memset(mpsc_ports, 0, sizeof(mpsc_ports)); + memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); + return; +} + +module_init(mpsc_drv_init); +module_exit(mpsc_drv_exit); + +MODULE_AUTHOR("Mark A. Greer "); +MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver $Revision: 1.00 $"); +MODULE_VERSION(MPSC_VERSION); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR); diff --git a/drivers/serial/mpsc.h b/drivers/serial/mpsc.h new file mode 100644 index 000000000000..1f7294b7095f --- /dev/null +++ b/drivers/serial/mpsc.h @@ -0,0 +1,289 @@ +/* + * drivers/serial/mpsc.h + * + * Author: Mark A. Greer + * + * 2004 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __MPSC_H__ +#define __MPSC_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#define MPSC_NUM_CTLRS 2 + +/* + * Descriptors and buffers must be cache line aligned. + * Buffers lengths must be multiple of cache line size. + * Number of Tx & Rx descriptors must be powers of 2. + */ +#define MPSC_RXR_ENTRIES 32 +#define MPSC_RXRE_SIZE dma_get_cache_alignment() +#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE) +#define MPSC_RXBE_SIZE dma_get_cache_alignment() +#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE) + +#define MPSC_TXR_ENTRIES 32 +#define MPSC_TXRE_SIZE dma_get_cache_alignment() +#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE) +#define MPSC_TXBE_SIZE dma_get_cache_alignment() +#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE) + +#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + \ + MPSC_TXR_SIZE + MPSC_TXB_SIZE + \ + dma_get_cache_alignment() /* for alignment */) + +/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */ +struct mpsc_rx_desc { + u16 bufsize; + u16 bytecnt; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +struct mpsc_tx_desc { + u16 bytecnt; + u16 shadow; + u32 cmdstat; + u32 link; + u32 buf_ptr; +} __attribute((packed)); + +/* + * Some regs that have the erratum that you can't read them are are shared + * between the two MPSC controllers. This struct contains those shared regs. + */ +struct mpsc_shared_regs { + phys_addr_t mpsc_routing_base_p; + phys_addr_t sdma_intr_base_p; + + void *mpsc_routing_base; + void *sdma_intr_base; + + u32 MPSC_MRR_m; + u32 MPSC_RCRR_m; + u32 MPSC_TCRR_m; + u32 SDMA_INTR_CAUSE_m; + u32 SDMA_INTR_MASK_m; +}; + +/* The main driver data structure */ +struct mpsc_port_info { + struct uart_port port; /* Overlay uart_port structure */ + + /* Internal driver state for this ctlr */ + u8 ready; + u8 rcv_data; + tcflag_t c_iflag; /* save termios->c_iflag */ + tcflag_t c_cflag; /* save termios->c_cflag */ + + /* Info passed in from platform */ + u8 mirror_regs; /* Need to mirror regs? */ + u8 cache_mgmt; /* Need manual cache mgmt? */ + u8 brg_can_tune; /* BRG has baud tuning? */ + u32 brg_clk_src; + u16 mpsc_max_idle; + int default_baud; + int default_bits; + int default_parity; + int default_flow; + + /* Physical addresses of various blocks of registers (from platform) */ + phys_addr_t mpsc_base_p; + phys_addr_t sdma_base_p; + phys_addr_t brg_base_p; + + /* Virtual addresses of various blocks of registers (from platform) */ + void *mpsc_base; + void *sdma_base; + void *brg_base; + + /* Descriptor ring and buffer allocations */ + void *dma_region; + dma_addr_t dma_region_p; + + dma_addr_t rxr; /* Rx descriptor ring */ + dma_addr_t rxr_p; /* Phys addr of rxr */ + u8 *rxb; /* Rx Ring I/O buf */ + u8 *rxb_p; /* Phys addr of rxb */ + u32 rxr_posn; /* First desc w/ Rx data */ + + dma_addr_t txr; /* Tx descriptor ring */ + dma_addr_t txr_p; /* Phys addr of txr */ + u8 *txb; /* Tx Ring I/O buf */ + u8 *txb_p; /* Phys addr of txb */ + int txr_head; /* Where new data goes */ + int txr_tail; /* Where sent data comes off */ + + /* Mirrored values of regs we can't read (if 'mirror_regs' set) */ + u32 MPSC_MPCR_m; + u32 MPSC_CHR_1_m; + u32 MPSC_CHR_2_m; + u32 MPSC_CHR_10_m; + u32 BRG_BCR_m; + struct mpsc_shared_regs *shared_regs; +}; + +/* Hooks to platform-specific code */ +int mpsc_platform_register_driver(void); +void mpsc_platform_unregister_driver(void); + +/* Hooks back in to mpsc common to be called by platform-specific code */ +struct mpsc_port_info *mpsc_device_probe(int index); +struct mpsc_port_info *mpsc_device_remove(int index); + +/* + ***************************************************************************** + * + * Multi-Protocol Serial Controller Interface Registers + * + ***************************************************************************** + */ + +/* Main Configuratino Register Offsets */ +#define MPSC_MMCRL 0x0000 +#define MPSC_MMCRH 0x0004 +#define MPSC_MPCR 0x0008 +#define MPSC_CHR_1 0x000c +#define MPSC_CHR_2 0x0010 +#define MPSC_CHR_3 0x0014 +#define MPSC_CHR_4 0x0018 +#define MPSC_CHR_5 0x001c +#define MPSC_CHR_6 0x0020 +#define MPSC_CHR_7 0x0024 +#define MPSC_CHR_8 0x0028 +#define MPSC_CHR_9 0x002c +#define MPSC_CHR_10 0x0030 +#define MPSC_CHR_11 0x0034 + +#define MPSC_MPCR_FRZ (1 << 9) +#define MPSC_MPCR_CL_5 0 +#define MPSC_MPCR_CL_6 1 +#define MPSC_MPCR_CL_7 2 +#define MPSC_MPCR_CL_8 3 +#define MPSC_MPCR_SBL_1 0 +#define MPSC_MPCR_SBL_2 1 + +#define MPSC_CHR_2_TEV (1<<1) +#define MPSC_CHR_2_TA (1<<7) +#define MPSC_CHR_2_TTCS (1<<9) +#define MPSC_CHR_2_REV (1<<17) +#define MPSC_CHR_2_RA (1<<23) +#define MPSC_CHR_2_CRD (1<<25) +#define MPSC_CHR_2_EH (1<<31) +#define MPSC_CHR_2_PAR_ODD 0 +#define MPSC_CHR_2_PAR_SPACE 1 +#define MPSC_CHR_2_PAR_EVEN 2 +#define MPSC_CHR_2_PAR_MARK 3 + +/* MPSC Signal Routing */ +#define MPSC_MRR 0x0000 +#define MPSC_RCRR 0x0004 +#define MPSC_TCRR 0x0008 + +/* + ***************************************************************************** + * + * Serial DMA Controller Interface Registers + * + ***************************************************************************** + */ + +#define SDMA_SDC 0x0000 +#define SDMA_SDCM 0x0008 +#define SDMA_RX_DESC 0x0800 +#define SDMA_RX_BUF_PTR 0x0808 +#define SDMA_SCRDP 0x0810 +#define SDMA_TX_DESC 0x0c00 +#define SDMA_SCTDP 0x0c10 +#define SDMA_SFTDP 0x0c14 + +#define SDMA_DESC_CMDSTAT_PE (1<<0) +#define SDMA_DESC_CMDSTAT_CDL (1<<1) +#define SDMA_DESC_CMDSTAT_FR (1<<3) +#define SDMA_DESC_CMDSTAT_OR (1<<6) +#define SDMA_DESC_CMDSTAT_BR (1<<9) +#define SDMA_DESC_CMDSTAT_MI (1<<10) +#define SDMA_DESC_CMDSTAT_A (1<<11) +#define SDMA_DESC_CMDSTAT_AM (1<<12) +#define SDMA_DESC_CMDSTAT_CT (1<<13) +#define SDMA_DESC_CMDSTAT_C (1<<14) +#define SDMA_DESC_CMDSTAT_ES (1<<15) +#define SDMA_DESC_CMDSTAT_L (1<<16) +#define SDMA_DESC_CMDSTAT_F (1<<17) +#define SDMA_DESC_CMDSTAT_P (1<<18) +#define SDMA_DESC_CMDSTAT_EI (1<<23) +#define SDMA_DESC_CMDSTAT_O (1<<31) + +#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O | \ + SDMA_DESC_CMDSTAT_EI) + +#define SDMA_SDC_RFT (1<<0) +#define SDMA_SDC_SFM (1<<1) +#define SDMA_SDC_BLMR (1<<6) +#define SDMA_SDC_BLMT (1<<7) +#define SDMA_SDC_POVR (1<<8) +#define SDMA_SDC_RIFB (1<<9) + +#define SDMA_SDCM_ERD (1<<7) +#define SDMA_SDCM_AR (1<<15) +#define SDMA_SDCM_STD (1<<16) +#define SDMA_SDCM_TXD (1<<23) +#define SDMA_SDCM_AT (1<<31) + +#define SDMA_0_CAUSE_RXBUF (1<<0) +#define SDMA_0_CAUSE_RXERR (1<<1) +#define SDMA_0_CAUSE_TXBUF (1<<2) +#define SDMA_0_CAUSE_TXEND (1<<3) +#define SDMA_1_CAUSE_RXBUF (1<<8) +#define SDMA_1_CAUSE_RXERR (1<<9) +#define SDMA_1_CAUSE_TXBUF (1<<10) +#define SDMA_1_CAUSE_TXEND (1<<11) + +#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \ + SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) +#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \ + SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) + +/* SDMA Interrupt registers */ +#define SDMA_INTR_CAUSE 0x0000 +#define SDMA_INTR_MASK 0x0080 + +/* + ***************************************************************************** + * + * Baud Rate Generator Interface Registers + * + ***************************************************************************** + */ + +#define BRG_BCR 0x0000 +#define BRG_BTR 0x0004 + +#endif /* __MPSC_H__ */ diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c new file mode 100644 index 000000000000..dadd7e19714e --- /dev/null +++ b/drivers/serial/mux.c @@ -0,0 +1,539 @@ +/* +** mux.c: +** serial driver for the Mux console found in some PA-RISC servers. +** +** (c) Copyright 2002 Ryan Bradetich +** (c) Copyright 2002 Hewlett-Packard Company +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** This Driver currently only supports the console (port 0) on the MUX. +** Additional work will be needed on this driver to enable the full +** functionality of the MUX. +** +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for udelay */ +#include +#include +#include + +#ifdef CONFIG_MAGIC_SYSRQ +#include +#define SUPPORT_SYSRQ +#endif + +#include + +#define MUX_OFFSET 0x800 +#define MUX_LINE_OFFSET 0x80 + +#define MUX_FIFO_SIZE 255 +#define MUX_POLL_DELAY (30 * HZ / 1000) + +#define IO_DATA_REG_OFFSET 0x3c +#define IO_DCOUNT_REG_OFFSET 0x40 + +#define MUX_EOFIFO(status) ((status & 0xF000) == 0xF000) +#define MUX_STATUS(status) ((status & 0xF000) == 0x8000) +#define MUX_BREAK(status) ((status & 0xF000) == 0x2000) + +#define MUX_NR 256 +static unsigned int port_cnt = 0; +static struct uart_port mux_ports[MUX_NR]; + +static struct uart_driver mux_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyB", + .dev_name = "ttyB", + .major = MUX_MAJOR, + .minor = 0, + .nr = MUX_NR, +}; + +static struct timer_list mux_timer; + +#define UART_PUT_CHAR(p, c) __raw_writel((c), (unsigned long)(p)->membase + IO_DATA_REG_OFFSET) +#define UART_GET_FIFO_CNT(p) __raw_readl((unsigned long)(p)->membase + IO_DCOUNT_REG_OFFSET) +#define GET_MUX_PORTS(iodc_data) ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8 + +/** + * mux_tx_empty - Check if the transmitter fifo is empty. + * @port: Ptr to the uart_port. + * + * This function test if the transmitter fifo for the port + * described by 'port' is empty. If it is empty, this function + * should return TIOCSER_TEMT, otherwise return 0. + */ +static unsigned int mux_tx_empty(struct uart_port *port) +{ + unsigned int cnt = __raw_readl((unsigned long)port->membase + + IO_DCOUNT_REG_OFFSET); + + return cnt ? 0 : TIOCSER_TEMT; +} + +/** + * mux_set_mctrl - Set the current state of the modem control inputs. + * @ports: Ptr to the uart_port. + * @mctrl: Modem control bits. + * + * The Serial MUX does not support CTS, DCD or DSR so this function + * is ignored. + */ +static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/** + * mux_get_mctrl - Returns the current state of modem control inputs. + * @port: Ptr to the uart_port. + * + * The Serial MUX does not support CTS, DCD or DSR so these lines are + * treated as permanently active. + */ +static unsigned int mux_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/** + * mux_stop_tx - Stop transmitting characters. + * @port: Ptr to the uart_port. + * @tty_stop: tty layer issue this command? + * + * The Serial MUX does not support this function. + */ +static void mux_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ +} + +/** + * mux_start_tx - Start transmitting characters. + * @port: Ptr to the uart_port. + * @tty_start: tty layer issue this command? + * + * The Serial Mux does not support this function. + */ +static void mux_start_tx(struct uart_port *port, unsigned int tty_start) +{ +} + +/** + * mux_stop_rx - Stop receiving characters. + * @port: Ptr to the uart_port. + * + * The Serial Mux does not support this function. + */ +static void mux_stop_rx(struct uart_port *port) +{ +} + +/** + * mux_enable_ms - Enable modum status interrupts. + * @port: Ptr to the uart_port. + * + * The Serial Mux does not support this function. + */ +static void mux_enable_ms(struct uart_port *port) +{ +} + +/** + * mux_break_ctl - Control the transmitssion of a break signal. + * @port: Ptr to the uart_port. + * @break_state: Raise/Lower the break signal. + * + * The Serial Mux does not support this function. + */ +static void mux_break_ctl(struct uart_port *port, int break_state) +{ +} + +/** + * mux_write - Write chars to the mux fifo. + * @port: Ptr to the uart_port. + * + * This function writes all the data from the uart buffer to + * the mux fifo. + */ +static void mux_write(struct uart_port *port) +{ + int count; + struct circ_buf *xmit = &port->info->xmit; + + if(port->x_char) { + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if(uart_circ_empty(xmit) || uart_tx_stopped(port)) { + mux_stop_tx(port, 0); + return; + } + + count = (port->fifosize) - UART_GET_FIFO_CNT(port); + do { + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if(uart_circ_empty(xmit)) + break; + + } while(--count > 0); + + while(UART_GET_FIFO_CNT(port)) + udelay(1); + + if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + mux_stop_tx(port, 0); +} + +/** + * mux_read - Read chars from the mux fifo. + * @port: Ptr to the uart_port. + * + * This reads all available data from the mux's fifo and pushes + * the data to the tty layer. + */ +static void mux_read(struct uart_port *port) +{ + int data; + struct tty_struct *tty = port->info->tty; + __u32 start_count = port->icount.rx; + + while(1) { + data = __raw_readl((unsigned long)port->membase + + IO_DATA_REG_OFFSET); + + if (MUX_STATUS(data)) + continue; + + if (MUX_EOFIFO(data)) + break; + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + continue; + + *tty->flip.char_buf_ptr = data & 0xffu; + *tty->flip.flag_buf_ptr = TTY_NORMAL; + port->icount.rx++; + + if (MUX_BREAK(data)) { + port->icount.brk++; + if(uart_handle_break(port)) + continue; + } + + if (uart_handle_sysrq_char(port, data & 0xffu, NULL)) + continue; + + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + + if (start_count != port->icount.rx) { + tty_flip_buffer_push(tty); + } +} + +/** + * mux_startup - Initialize the port. + * @port: Ptr to the uart_port. + * + * Grab any resources needed for this port and start the + * mux timer. + */ +static int mux_startup(struct uart_port *port) +{ + mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); + return 0; +} + +/** + * mux_shutdown - Disable the port. + * @port: Ptr to the uart_port. + * + * Release any resources needed for the port. + */ +static void mux_shutdown(struct uart_port *port) +{ +} + +/** + * mux_set_termios - Chane port parameters. + * @port: Ptr to the uart_port. + * @termios: new termios settings. + * @old: old termios settings. + * + * The Serial Mux does not support this function. + */ +static void +mux_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ +} + +/** + * mux_type - Describe the port. + * @port: Ptr to the uart_port. + * + * Return a pointer to a string constant describing the + * specified port. + */ +static const char *mux_type(struct uart_port *port) +{ + return "Mux"; +} + +/** + * mux_release_port - Release memory and IO regions. + * @port: Ptr to the uart_port. + * + * Release any memory and IO region resources currently in use by + * the port. + */ +static void mux_release_port(struct uart_port *port) +{ +} + +/** + * mux_request_port - Request memory and IO regions. + * @port: Ptr to the uart_port. + * + * Request any memory and IO region resources required by the port. + * If any fail, no resources should be registered when this function + * returns, and it should return -EBUSY on failure. + */ +static int mux_request_port(struct uart_port *port) +{ + return 0; +} + +/** + * mux_config_port - Perform port autoconfiguration. + * @port: Ptr to the uart_port. + * @type: Bitmask of required configurations. + * + * Perform any autoconfiguration steps for the port. This functino is + * called if the UPF_BOOT_AUTOCONF flag is specified for the port. + * [Note: This is required for now because of a bug in the Serial core. + * rmk has already submitted a patch to linus, should be available for + * 2.5.47.] + */ +static void mux_config_port(struct uart_port *port, int type) +{ + port->type = PORT_MUX; +} + +/** + * mux_verify_port - Verify the port information. + * @port: Ptr to the uart_port. + * @ser: Ptr to the serial information. + * + * Verify the new serial port information contained within serinfo is + * suitable for this port type. + */ +static int mux_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if(port->membase == NULL) + return -EINVAL; + + return 0; +} + +/** + * mux_drv_poll - Mux poll function. + * @unused: Unused variable + * + * This function periodically polls the Serial MUX to check for new data. + */ +static void mux_poll(unsigned long unused) +{ + int i; + + for(i = 0; i < port_cnt; ++i) { + if(!mux_ports[i].info) + continue; + + mux_read(&mux_ports[i]); + mux_write(&mux_ports[i]); + } + + mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY); +} + + +#ifdef CONFIG_SERIAL_MUX_CONSOLE +static void mux_console_write(struct console *co, const char *s, unsigned count) +{ + while(count--) + pdc_iodc_putc(*s++); +} + +static int mux_console_setup(struct console *co, char *options) +{ + return 0; +} + +struct tty_driver *mux_console_device(struct console *co, int *index) +{ + *index = co->index; + return mux_driver.tty_driver; +} + +static struct console mux_console = { + .name = "ttyB", + .write = mux_console_write, + .device = mux_console_device, + .setup = mux_console_setup, + .flags = CON_ENABLED | CON_PRINTBUFFER, + .index = 0, +}; + +#define MUX_CONSOLE &mux_console +#else +#define MUX_CONSOLE NULL +#endif + +static struct uart_ops mux_pops = { + .tx_empty = mux_tx_empty, + .set_mctrl = mux_set_mctrl, + .get_mctrl = mux_get_mctrl, + .stop_tx = mux_stop_tx, + .start_tx = mux_start_tx, + .stop_rx = mux_stop_rx, + .enable_ms = mux_enable_ms, + .break_ctl = mux_break_ctl, + .startup = mux_startup, + .shutdown = mux_shutdown, + .set_termios = mux_set_termios, + .type = mux_type, + .release_port = mux_release_port, + .request_port = mux_request_port, + .config_port = mux_config_port, + .verify_port = mux_verify_port, +}; + +/** + * mux_probe - Determine if the Serial Mux should claim this device. + * @dev: The parisc device. + * + * Deterimine if the Serial Mux should claim this chip (return 0) + * or not (return 1). + */ +static int __init mux_probe(struct parisc_device *dev) +{ + int i, status, ports; + u8 iodc_data[32]; + unsigned long bytecnt; + struct uart_port *port; + + status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32); + if(status != PDC_OK) { + printk(KERN_ERR "Serial mux: Unable to read IODC.\n"); + return 1; + } + + ports = GET_MUX_PORTS(iodc_data); + printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.3\n", ports); + + if(!port_cnt) { + mux_driver.cons = MUX_CONSOLE; + + status = uart_register_driver(&mux_driver); + if(status) { + printk(KERN_ERR "Serial mux: Unable to register driver.\n"); + return 1; + } + + init_timer(&mux_timer); + mux_timer.function = mux_poll; + } + + for(i = 0; i < ports; ++i, ++port_cnt) { + port = &mux_ports[port_cnt]; + port->iobase = 0; + port->mapbase = dev->hpa + MUX_OFFSET + (i * MUX_LINE_OFFSET); + port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET); + port->iotype = SERIAL_IO_MEM; + port->type = PORT_MUX; + port->irq = SERIAL_IRQ_NONE; + port->uartclk = 0; + port->fifosize = MUX_FIFO_SIZE; + port->ops = &mux_pops; + port->flags = UPF_BOOT_AUTOCONF; + port->line = port_cnt; + status = uart_add_one_port(&mux_driver, port); + BUG_ON(status); + } + +#ifdef CONFIG_SERIAL_MUX_CONSOLE + register_console(&mux_console); +#endif + return 0; +} + +static struct parisc_device_id mux_tbl[] = { + { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D }, + { 0, } +}; + +MODULE_DEVICE_TABLE(parisc, mux_tbl); + +static struct parisc_driver serial_mux_driver = { + .name = "Serial MUX", + .id_table = mux_tbl, + .probe = mux_probe, +}; + +/** + * mux_init - Serial MUX initalization procedure. + * + * Register the Serial MUX driver. + */ +static int __init mux_init(void) +{ + return register_parisc_driver(&serial_mux_driver); +} + +/** + * mux_exit - Serial MUX cleanup procedure. + * + * Unregister the Serial MUX driver from the tty layer. + */ +static void __exit mux_exit(void) +{ + int i; + + for (i = 0; i < port_cnt; i++) { + uart_remove_one_port(&mux_driver, &mux_ports[i]); + } + + uart_unregister_driver(&mux_driver); +} + +module_init(mux_init); +module_exit(mux_exit); + +MODULE_AUTHOR("Ryan Bradetich"); +MODULE_DESCRIPTION("Serial MUX driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(MUX_MAJOR); diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c new file mode 100644 index 000000000000..0a6b9f0ed23f --- /dev/null +++ b/drivers/serial/pmac_zilog.c @@ -0,0 +1,2048 @@ +/* + * linux/drivers/serial/pmac_zilog.c + * + * Driver for PowerMac Z85c30 based ESCC cell found in the + * "macio" ASICs of various PowerMac models + * + * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * Derived from drivers/macintosh/macserial.c by Paul Mackerras + * and drivers/serial/sunzilog.c by David S. Miller + * + * Hrm... actually, I ripped most of sunzilog (Thanks David !) and + * adapted special tweaks needed for us. I don't think it's worth + * merging back those though. The DMA code still has to get in + * and once done, I expect that driver to remain fairly stable in + * the long term, unless we change the driver model again... + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * 2004-08-06 Harald Welte + * - Enable BREAK interrupt + * - Add support for sysreq + * + * TODO: - Add DMA support + * - Defer port shutdown to a few seconds after close + * - maybe put something right into uap->clk_divisor + */ + +#undef DEBUG +#undef DEBUG_HARD +#undef USE_CTRL_O_SYSRQ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include + +#include "pmac_zilog.h" + +/* Not yet implemented */ +#undef HAS_DBDMA + +static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt )"; +MODULE_AUTHOR("Benjamin Herrenschmidt "); +MODULE_DESCRIPTION("Driver for the PowerMac serial ports."); +MODULE_LICENSE("GPL"); + +#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg) + + +/* + * For the sake of early serial console, we can do a pre-probe + * (optional) of the ports at rather early boot time. + */ +static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS]; +static int pmz_ports_count; +static DECLARE_MUTEX(pmz_irq_sem); + +static struct uart_driver pmz_uart_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyS", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + + +/* + * Load all registers to reprogram the port + * This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs) +{ + int i; + + if (ZS_IS_ASLEEP(uap)) + return; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(uap, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + ZS_CLEARERR(uap); + zssync(uap); + ZS_CLEARFIFO(uap); + zssync(uap); + ZS_CLEARERR(uap); + + /* Disable all interrupts. */ + write_zsreg(uap, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(uap, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(uap, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(uap, R3, regs[R3] & ~RxENABLE); + write_zsreg(uap, R5, regs[R5] & ~TxENABLE); + + /* now set R7 "prime" on ESCC */ + write_zsreg(uap, R15, regs[R15] | EN85C30); + write_zsreg(uap, R7, regs[R7P]); + + /* make sure we use R7 "non-prime" on ESCC */ + write_zsreg(uap, R15, regs[R15] & ~EN85C30); + + /* Synchronous mode config. */ + write_zsreg(uap, R6, regs[R6]); + write_zsreg(uap, R7, regs[R7]); + + /* Disable baud generator. */ + write_zsreg(uap, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(uap, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(uap, R12, regs[R12]); + write_zsreg(uap, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(uap, R14, regs[R14]); + + /* Reset external status interrupts. */ + write_zsreg(uap, R0, RES_EXT_INT); + write_zsreg(uap, R0, RES_EXT_INT); + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(uap, R3, regs[R3]); + write_zsreg(uap, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(uap, R1, regs[R1]); + + /* Enable interrupts */ + write_zsreg(uap, R9, regs[R9]); +} + +/* + * We do like sunzilog to avoid disrupting pending Tx + * Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void pmz_maybe_update_regs(struct uart_pmac_port *uap) +{ + if (!ZS_REGS_HELD(uap)) { + if (ZS_TX_ACTIVE(uap)) { + uap->flags |= PMACZILOG_FLAG_REGS_HELD; + } else { + pmz_debug("pmz: maybe_update_regs: updating\n"); + pmz_load_zsregs(uap, uap->curregs); + } + } +} + +static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap, + struct pt_regs *regs) +{ + struct tty_struct *tty = NULL; + unsigned char ch, r1, drop, error; + int loops = 0; + + retry: + /* The interrupt can be enabled when the port isn't open, typically + * that happens when using one port is open and the other closed (stale + * interrupt) or when one port is used as a console. + */ + if (!ZS_IS_OPEN(uap)) { + pmz_debug("pmz: draining input\n"); + /* Port is closed, drain input data */ + for (;;) { + if ((++loops) > 1000) + goto flood; + (void)read_zsreg(uap, R1); + write_zsreg(uap, R0, ERR_RES); + (void)read_zsdata(uap); + ch = read_zsreg(uap, R0); + if (!(ch & Rx_CH_AV)) + break; + } + return NULL; + } + + /* Sanity check, make sure the old bug is no longer happening */ + if (uap->port.info == NULL || uap->port.info->tty == NULL) { + WARN_ON(1); + (void)read_zsdata(uap); + return NULL; + } + tty = uap->port.info->tty; + + while (1) { + error = 0; + drop = 0; + + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + /* Have to drop the lock here */ + pmz_debug("pmz: flip overflow\n"); + spin_unlock(&uap->port.lock); + tty->flip.work.func((void *)tty); + spin_lock(&uap->port.lock); + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + drop = 1; + if (ZS_IS_ASLEEP(uap)) + return NULL; + if (!ZS_IS_OPEN(uap)) + goto retry; + } + + r1 = read_zsreg(uap, R1); + ch = read_zsdata(uap); + + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + write_zsreg(uap, R0, ERR_RES); + zssync(uap); + } + + ch &= uap->parity_mask; + if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) { + uap->flags &= ~PMACZILOG_FLAG_BREAK; + } + +#if defined(CONFIG_MAGIC_SYSRQ) && defined(CONFIG_SERIAL_CORE_CONSOLE) +#ifdef USE_CTRL_O_SYSRQ + /* Handle the SysRq ^O Hack */ + if (ch == '\x0f') { + uap->port.sysrq = jiffies + HZ*5; + goto next_char; + } +#endif /* USE_CTRL_O_SYSRQ */ + if (uap->port.sysrq) { + int swallow; + spin_unlock(&uap->port.lock); + swallow = uart_handle_sysrq_char(&uap->port, ch, regs); + spin_lock(&uap->port.lock); + if (swallow) + goto next_char; + } +#endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */ + + /* A real serial line, record the character and status. */ + if (drop) + goto next_char; + + *tty->flip.char_buf_ptr = ch; + *tty->flip.flag_buf_ptr = TTY_NORMAL; + uap->port.icount.rx++; + + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) { + error = 1; + if (r1 & BRK_ABRT) { + pmz_debug("pmz: got break !\n"); + r1 &= ~(PAR_ERR | CRC_ERR); + uap->port.icount.brk++; + if (uart_handle_break(&uap->port)) + goto next_char; + } + else if (r1 & PAR_ERR) + uap->port.icount.parity++; + else if (r1 & CRC_ERR) + uap->port.icount.frame++; + if (r1 & Rx_OVR) + uap->port.icount.overrun++; + r1 &= uap->port.read_status_mask; + if (r1 & BRK_ABRT) + *tty->flip.flag_buf_ptr = TTY_BREAK; + else if (r1 & PAR_ERR) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (r1 & CRC_ERR) + *tty->flip.flag_buf_ptr = TTY_FRAME; + } + + if (uap->port.ignore_status_mask == 0xff || + (r1 & uap->port.ignore_status_mask) == 0) { + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + if ((r1 & Rx_OVR) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + next_char: + /* We can get stuck in an infinite loop getting char 0 when the + * line is in a wrong HW state, we break that here. + * When that happens, I disable the receive side of the driver. + * Note that what I've been experiencing is a real irq loop where + * I'm getting flooded regardless of the actual port speed. + * Something stange is going on with the HW + */ + if ((++loops) > 1000) + goto flood; + ch = read_zsreg(uap, R0); + if (!(ch & Rx_CH_AV)) + break; + } + + return tty; + flood: + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + write_zsreg(uap, R1, uap->curregs[R1]); + zssync(uap); + dev_err(&uap->dev->ofdev.dev, "pmz: rx irq flood !\n"); + return tty; +} + +static void pmz_status_handle(struct uart_pmac_port *uap, struct pt_regs *regs) +{ + unsigned char status; + + status = read_zsreg(uap, R0); + write_zsreg(uap, R0, RES_EXT_INT); + zssync(uap); + + if (ZS_IS_OPEN(uap) && ZS_WANTS_MODEM_STATUS(uap)) { + if (status & SYNC_HUNT) + uap->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + * The CTS input is inverted for some reason. -- paulus + */ + if ((status ^ uap->prev_status) & DCD) + uart_handle_dcd_change(&uap->port, + (status & DCD)); + if ((status ^ uap->prev_status) & CTS) + uart_handle_cts_change(&uap->port, + !(status & CTS)); + + wake_up_interruptible(&uap->port.info->delta_msr_wait); + } + + if (status & BRK_ABRT) + uap->flags |= PMACZILOG_FLAG_BREAK; + + uap->prev_status = status; +} + +static void pmz_transmit_chars(struct uart_pmac_port *uap) +{ + struct circ_buf *xmit; + + if (ZS_IS_ASLEEP(uap)) + return; + if (ZS_IS_CONS(uap)) { + unsigned char status = read_zsreg(uap, R0); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becomming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + uap->flags &= ~PMACZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(uap)) { + pmz_load_zsregs(uap, uap->curregs); + uap->flags &= ~PMACZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(uap)) { + uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + if (uap->port.x_char) { + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + write_zsdata(uap, uap->port.x_char); + zssync(uap); + uap->port.icount.tx++; + uap->port.x_char = 0; + return; + } + + if (uap->port.info == NULL) + goto ack_tx_int; + xmit = &uap->port.info->xmit; + if (uart_circ_empty(xmit)) { + uart_write_wakeup(&uap->port); + goto ack_tx_int; + } + if (uart_tx_stopped(&uap->port)) + goto ack_tx_int; + + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + write_zsdata(uap, xmit->buf[xmit->tail]); + zssync(uap); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uap->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + + return; + +ack_tx_int: + write_zsreg(uap, R0, RES_Tx_P); + zssync(uap); +} + +/* Hrm... we register that twice, fixme later.... */ +static irqreturn_t pmz_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_pmac_port *uap = dev_id; + struct uart_pmac_port *uap_a; + struct uart_pmac_port *uap_b; + int rc = IRQ_NONE; + struct tty_struct *tty; + u8 r3; + + uap_a = pmz_get_port_A(uap); + uap_b = uap_a->mate; + + spin_lock(&uap_a->port.lock); + r3 = read_zsreg(uap_a, R3); + +#ifdef DEBUG_HARD + pmz_debug("irq, r3: %x\n", r3); +#endif + /* Channel A */ + tty = NULL; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + write_zsreg(uap_a, R0, RES_H_IUS); + zssync(uap_a); + if (r3 & CHAEXT) + pmz_status_handle(uap_a, regs); + if (r3 & CHARxIP) + tty = pmz_receive_chars(uap_a, regs); + if (r3 & CHATxIP) + pmz_transmit_chars(uap_a); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_a->port.lock); + if (tty != NULL) + tty_flip_buffer_push(tty); + + if (uap_b->node == NULL) + goto out; + + spin_lock(&uap_b->port.lock); + tty = NULL; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + write_zsreg(uap_b, R0, RES_H_IUS); + zssync(uap_b); + if (r3 & CHBEXT) + pmz_status_handle(uap_b, regs); + if (r3 & CHBRxIP) + tty = pmz_receive_chars(uap_b, regs); + if (r3 & CHBTxIP) + pmz_transmit_chars(uap_b); + rc = IRQ_HANDLED; + } + spin_unlock(&uap_b->port.lock); + if (tty != NULL) + tty_flip_buffer_push(tty); + + out: +#ifdef DEBUG_HARD + pmz_debug("irq done.\n"); +#endif + return rc; +} + +/* + * Peek the status register, lock not held by caller + */ +static inline u8 pmz_peek_status(struct uart_pmac_port *uap) +{ + unsigned long flags; + u8 status; + + spin_lock_irqsave(&uap->port.lock, flags); + status = read_zsreg(uap, R0); + spin_unlock_irqrestore(&uap->port.lock, flags); + + return status; +} + +/* + * Check if transmitter is empty + * The port lock is not held. + */ +static unsigned int pmz_tx_empty(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return TIOCSER_TEMT; + + status = pmz_peek_status(to_pmz(port)); + if (status & Tx_BUF_EMP) + return TIOCSER_TEMT; + return 0; +} + +/* + * Set Modem Control (RTS & DTR) bits + * The port lock is held and interrupts are disabled. + * Note: Shall we really filter out RTS on external ports or + * should that be dealt at higher level only ? + */ +static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char set_bits, clear_bits; + + /* Do nothing for irda for now... */ + if (ZS_IS_IRDA(uap)) + return; + /* We get called during boot with a port not up yet */ + if (ZS_IS_ASLEEP(uap) || + !(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap))) + return; + + set_bits = clear_bits = 0; + + if (ZS_IS_INTMODEM(uap)) { + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + } + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + uap->curregs[R5] |= set_bits; + uap->curregs[R5] &= ~clear_bits; + if (ZS_IS_ASLEEP(uap)) + return; + write_zsreg(uap, R5, uap->curregs[R5]); + pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n", + set_bits, clear_bits, uap->curregs[R5]); + zssync(uap); +} + +/* + * Get Modem Control bits (only the input ones, the core will + * or that with a cached value of the control ones) + * The port lock is not held. + */ +static unsigned int pmz_get_mctrl(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + unsigned int ret; + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return 0; + + status = pmz_peek_status(to_pmz(port)); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC_HUNT) + ret |= TIOCM_DSR; + if (!(status & CTS)) + ret |= TIOCM_CTS; + + return ret; +} + +/* + * Stop TX side. Dealt like sunzilog at next Tx interrupt, + * though for DMA, we will have to do a bit more. What is + * the meaning of the tty_stop bit ? XXX + * The port lock is held and interrupts are disabled. + */ +static void pmz_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED; +} + +/* + * Kick the Tx side. + * The port lock is held and interrupts are disabled. + */ +static void pmz_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char status; + + pmz_debug("pmz: start_tx()\n"); + + uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; + uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED; + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return; + + status = read_zsreg(uap, R0); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + write_zsdata(uap, port->x_char); + zssync(uap); + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->info->xmit; + + write_zsdata(uap, xmit->buf[xmit->tail]); + zssync(uap); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uap->port); + } + pmz_debug("pmz: start_tx() done.\n"); +} + +/* + * Stop Rx side, basically disable emitting of + * Rx interrupts on the port. We don't disable the rx + * side of the chip proper though + * The port lock is held. + */ +static void pmz_stop_rx(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + + if (ZS_IS_ASLEEP(uap) || uap->node == NULL) + return; + + pmz_debug("pmz: stop_rx()()\n"); + + /* Disable all RX interrupts. */ + uap->curregs[R1] &= ~RxINT_MASK; + pmz_maybe_update_regs(uap); + + pmz_debug("pmz: stop_rx() done.\n"); +} + +/* + * Enable modem status change interrupts + * The port lock is held. + */ +static void pmz_enable_ms(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char new_reg; + + if (ZS_IS_IRDA(uap) || uap->node == NULL) + return; + new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != uap->curregs[R15]) { + uap->curregs[R15] = new_reg; + + if (ZS_IS_ASLEEP(uap)) + return; + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(uap, R15, uap->curregs[R15]); + } +} + +/* + * Control break state emission + * The port lock is not held. + */ +static void pmz_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + if (uap->node == NULL) + return; + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != uap->curregs[R5]) { + uap->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + if (ZS_IS_ASLEEP(uap)) + return; + write_zsreg(uap, R5, uap->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* + * Turn power on or off to the SCC and associated stuff + * (port drivers, modem, IR port, etc.) + * Returns the number of milliseconds we should wait before + * trying to use the port. + */ +static int pmz_set_scc_power(struct uart_pmac_port *uap, int state) +{ + int delay = 0; + int rc; + + if (state) { + rc = pmac_call_feature( + PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 1); + pmz_debug("port power on result: %d\n", rc); + if (ZS_IS_INTMODEM(uap)) { + rc = pmac_call_feature( + PMAC_FTR_MODEM_ENABLE, uap->node, 0, 1); + delay = 2500; /* wait for 2.5s before using */ + pmz_debug("modem power result: %d\n", rc); + } + } else { + /* TODO: Make that depend on a timer, don't power down + * immediately + */ + if (ZS_IS_INTMODEM(uap)) { + rc = pmac_call_feature( + PMAC_FTR_MODEM_ENABLE, uap->node, 0, 0); + pmz_debug("port power off result: %d\n", rc); + } + pmac_call_feature(PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 0); + } + return delay; +} + +/* + * FixZeroBug....Works around a bug in the SCC receving channel. + * Inspired from Darwin code, 15 Sept. 2000 -DanM + * + * The following sequence prevents a problem that is seen with O'Hare ASICs + * (most versions -- also with some Heathrow and Hydra ASICs) where a zero + * at the input to the receiver becomes 'stuck' and locks up the receiver. + * This problem can occur as a result of a zero bit at the receiver input + * coincident with any of the following events: + * + * The SCC is initialized (hardware or software). + * A framing error is detected. + * The clocking option changes from synchronous or X1 asynchronous + * clocking to X16, X32, or X64 asynchronous clocking. + * The decoding mode is changed among NRZ, NRZI, FM0, or FM1. + * + * This workaround attempts to recover from the lockup condition by placing + * the SCC in synchronous loopback mode with a fast clock before programming + * any of the asynchronous modes. + */ +static void pmz_fix_zero_bug_scc(struct uart_pmac_port *uap) +{ + write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); + zssync(uap); + udelay(10); + write_zsreg(uap, 9, (ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB) | NV); + zssync(uap); + + write_zsreg(uap, 4, X1CLK | MONSYNC); + write_zsreg(uap, 3, Rx8); + write_zsreg(uap, 5, Tx8 | RTS); + write_zsreg(uap, 9, NV); /* Didn't we already do this? */ + write_zsreg(uap, 11, RCBR | TCBR); + write_zsreg(uap, 12, 0); + write_zsreg(uap, 13, 0); + write_zsreg(uap, 14, (LOOPBAK | BRSRC)); + write_zsreg(uap, 14, (LOOPBAK | BRSRC | BRENAB)); + write_zsreg(uap, 3, Rx8 | RxENABLE); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, RES_EXT_INT); /* to kill some time */ + + /* The channel should be OK now, but it is probably receiving + * loopback garbage. + * Switch to asynchronous mode, disable the receiver, + * and discard everything in the receive buffer. + */ + write_zsreg(uap, 9, NV); + write_zsreg(uap, 4, X16CLK | SB_MASK); + write_zsreg(uap, 3, Rx8); + + while (read_zsreg(uap, 0) & Rx_CH_AV) { + (void)read_zsreg(uap, 8); + write_zsreg(uap, 0, RES_EXT_INT); + write_zsreg(uap, 0, ERR_RES); + } +} + +/* + * Real startup routine, powers up the hardware and sets up + * the SCC. Returns a delay in ms where you need to wait before + * actually using the port, this is typically the internal modem + * powerup delay. This routine expect the lock to be taken. + */ +static int __pmz_startup(struct uart_pmac_port *uap) +{ + int pwr_delay = 0; + + memset(&uap->curregs, 0, sizeof(uap->curregs)); + + /* Power up the SCC & underlying hardware (modem/irda) */ + pwr_delay = pmz_set_scc_power(uap, 1); + + /* Nice buggy HW ... */ + pmz_fix_zero_bug_scc(uap); + + /* Reset the channel */ + uap->curregs[R9] = 0; + write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB); + zssync(uap); + udelay(10); + write_zsreg(uap, 9, 0); + zssync(uap); + + /* Clear the interrupt registers */ + write_zsreg(uap, R1, 0); + write_zsreg(uap, R0, ERR_RES); + write_zsreg(uap, R0, ERR_RES); + write_zsreg(uap, R0, RES_H_IUS); + write_zsreg(uap, R0, RES_H_IUS); + + /* Setup some valid baud rate */ + uap->curregs[R4] = X16CLK | SB1; + uap->curregs[R3] = Rx8; + uap->curregs[R5] = Tx8 | RTS; + if (!ZS_IS_IRDA(uap)) + uap->curregs[R5] |= DTR; + uap->curregs[R12] = 0; + uap->curregs[R13] = 0; + uap->curregs[R14] = BRENAB; + + /* Clear handshaking, enable BREAK interrupts */ + uap->curregs[R15] = BRKIE; + + /* Master interrupt enable */ + uap->curregs[R9] |= NV | MIE; + + pmz_load_zsregs(uap, uap->curregs); + + /* Enable receiver and transmitter. */ + write_zsreg(uap, R3, uap->curregs[R3] |= RxENABLE); + write_zsreg(uap, R5, uap->curregs[R5] |= TxENABLE); + + /* Remember status for DCD/CTS changes */ + uap->prev_status = read_zsreg(uap, R0); + + + return pwr_delay; +} + +static void pmz_irda_reset(struct uart_pmac_port *uap) +{ + uap->curregs[R5] |= DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + mdelay(110); + uap->curregs[R5] &= ~DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + mdelay(10); +} + +/* + * This is the "normal" startup routine, using the above one + * wrapped with the lock and doing a schedule delay + */ +static int pmz_startup(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + int pwr_delay = 0; + + pmz_debug("pmz: startup()\n"); + + if (ZS_IS_ASLEEP(uap)) + return -EAGAIN; + if (uap->node == NULL) + return -ENODEV; + + down(&pmz_irq_sem); + + uap->flags |= PMACZILOG_FLAG_IS_OPEN; + + /* A console is never powered down. Else, power up and + * initialize the chip + */ + if (!ZS_IS_CONS(uap)) { + spin_lock_irqsave(&port->lock, flags); + pwr_delay = __pmz_startup(uap); + spin_unlock_irqrestore(&port->lock, flags); + } + + pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; + if (request_irq(uap->port.irq, pmz_interrupt, SA_SHIRQ, "PowerMac Zilog", uap)) { + dev_err(&uap->dev->ofdev.dev, + "Unable to register zs interrupt handler.\n"); + pmz_set_scc_power(uap, 0); + up(&pmz_irq_sem); + return -ENXIO; + } + + up(&pmz_irq_sem); + + /* Right now, we deal with delay by blocking here, I'll be + * smarter later on + */ + if (pwr_delay != 0) { + pmz_debug("pmz: delaying %d ms\n", pwr_delay); + msleep(pwr_delay); + } + + /* IrDA reset is done now */ + if (ZS_IS_IRDA(uap)) + pmz_irda_reset(uap); + + /* Enable interrupts emission from the chip */ + spin_lock_irqsave(&port->lock, flags); + uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; + if (!ZS_IS_EXTCLK(uap)) + uap->curregs[R1] |= EXT_INT_ENAB; + write_zsreg(uap, R1, uap->curregs[R1]); + spin_unlock_irqrestore(&port->lock, flags); + + pmz_debug("pmz: startup() done.\n"); + + return 0; +} + +static void pmz_shutdown(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + + pmz_debug("pmz: shutdown()\n"); + + if (uap->node == NULL) + return; + + down(&pmz_irq_sem); + + /* Release interrupt handler */ + free_irq(uap->port.irq, uap); + + spin_lock_irqsave(&port->lock, flags); + + uap->flags &= ~PMACZILOG_FLAG_IS_OPEN; + + if (!ZS_IS_OPEN(uap->mate)) + pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON; + + /* Disable interrupts */ + if (!ZS_IS_ASLEEP(uap)) { + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + write_zsreg(uap, R1, uap->curregs[R1]); + zssync(uap); + } + + if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) { + spin_unlock_irqrestore(&port->lock, flags); + up(&pmz_irq_sem); + return; + } + + /* Disable receiver and transmitter. */ + uap->curregs[R3] &= ~RxENABLE; + uap->curregs[R5] &= ~TxENABLE; + + /* Disable all interrupts and BRK assertion. */ + uap->curregs[R5] &= ~SND_BRK; + pmz_maybe_update_regs(uap); + + /* Shut the chip down */ + pmz_set_scc_power(uap, 0); + + spin_unlock_irqrestore(&port->lock, flags); + + up(&pmz_irq_sem); + + pmz_debug("pmz: shutdown() done.\n"); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag, + unsigned int iflag, unsigned long baud) +{ + int brg; + + + /* Switch to external clocking for IrDA high clock rates. That + * code could be re-used for Midi interfaces with different + * multipliers + */ + if (baud >= 115200 && ZS_IS_IRDA(uap)) { + uap->curregs[R4] = X1CLK; + uap->curregs[R11] = RCTRxCP | TCTRxCP; + uap->curregs[R14] = 0; /* BRG off */ + uap->curregs[R12] = 0; + uap->curregs[R13] = 0; + uap->flags |= PMACZILOG_FLAG_IS_EXTCLK; + } else { + switch (baud) { + case ZS_CLOCK/16: /* 230400 */ + uap->curregs[R4] = X16CLK; + uap->curregs[R11] = 0; + uap->curregs[R14] = 0; + break; + case ZS_CLOCK/32: /* 115200 */ + uap->curregs[R4] = X32CLK; + uap->curregs[R11] = 0; + uap->curregs[R14] = 0; + break; + default: + uap->curregs[R4] = X16CLK; + uap->curregs[R11] = TCBR | RCBR; + brg = BPS_TO_BRG(baud, ZS_CLOCK / 16); + uap->curregs[R12] = (brg & 255); + uap->curregs[R13] = ((brg >> 8) & 255); + uap->curregs[R14] = BRENAB; + } + uap->flags &= ~PMACZILOG_FLAG_IS_EXTCLK; + } + + /* Character size, stop bits, and parity. */ + uap->curregs[3] &= ~RxN_MASK; + uap->curregs[5] &= ~TxN_MASK; + + switch (cflag & CSIZE) { + case CS5: + uap->curregs[3] |= Rx5; + uap->curregs[5] |= Tx5; + uap->parity_mask = 0x1f; + break; + case CS6: + uap->curregs[3] |= Rx6; + uap->curregs[5] |= Tx6; + uap->parity_mask = 0x3f; + break; + case CS7: + uap->curregs[3] |= Rx7; + uap->curregs[5] |= Tx7; + uap->parity_mask = 0x7f; + break; + case CS8: + default: + uap->curregs[3] |= Rx8; + uap->curregs[5] |= Tx8; + uap->parity_mask = 0xff; + break; + }; + uap->curregs[4] &= ~(SB_MASK); + if (cflag & CSTOPB) + uap->curregs[4] |= SB2; + else + uap->curregs[4] |= SB1; + if (cflag & PARENB) + uap->curregs[4] |= PAR_ENAB; + else + uap->curregs[4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + uap->curregs[4] |= PAR_EVEN; + else + uap->curregs[4] &= ~PAR_EVEN; + + uap->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + uap->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (BRKINT | PARMRK)) + uap->port.read_status_mask |= BRK_ABRT; + + uap->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + uap->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + uap->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + uap->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + uap->port.ignore_status_mask = 0xff; +} + + +/* + * Set the irda codec on the imac to the specified baud rate. + */ +static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud) +{ + u8 cmdbyte; + int t, version; + + switch (*baud) { + /* SIR modes */ + case 2400: + cmdbyte = 0x53; + break; + case 4800: + cmdbyte = 0x52; + break; + case 9600: + cmdbyte = 0x51; + break; + case 19200: + cmdbyte = 0x50; + break; + case 38400: + cmdbyte = 0x4f; + break; + case 57600: + cmdbyte = 0x4e; + break; + case 115200: + cmdbyte = 0x4d; + break; + /* The FIR modes aren't really supported at this point, how + * do we select the speed ? via the FCR on KeyLargo ? + */ + case 1152000: + cmdbyte = 0; + break; + case 4000000: + cmdbyte = 0; + break; + default: /* 9600 */ + cmdbyte = 0x51; + *baud = 9600; + break; + } + + /* Wait for transmitter to drain */ + t = 10000; + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0 + || (read_zsreg(uap, R1) & ALL_SNT) == 0) { + if (--t <= 0) { + dev_err(&uap->dev->ofdev.dev, "transmitter didn't drain\n"); + return; + } + udelay(10); + } + + /* Drain the receiver too */ + t = 100; + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); + mdelay(10); + while (read_zsreg(uap, R0) & Rx_CH_AV) { + read_zsdata(uap); + mdelay(10); + if (--t <= 0) { + dev_err(&uap->dev->ofdev.dev, "receiver didn't drain\n"); + return; + } + } + + /* Switch to command mode */ + uap->curregs[R5] |= DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + mdelay(1); + + /* Switch SCC to 19200 */ + pmz_convert_to_zs(uap, CS8, 0, 19200); + pmz_load_zsregs(uap, uap->curregs); + mdelay(1); + + /* Write get_version command byte */ + write_zsdata(uap, 1); + t = 5000; + while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { + if (--t <= 0) { + dev_err(&uap->dev->ofdev.dev, + "irda_setup timed out on get_version byte\n"); + goto out; + } + udelay(10); + } + version = read_zsdata(uap); + + if (version < 4) { + dev_info(&uap->dev->ofdev.dev, "IrDA: dongle version %d not supported\n", + version); + goto out; + } + + /* Send speed mode */ + write_zsdata(uap, cmdbyte); + t = 5000; + while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) { + if (--t <= 0) { + dev_err(&uap->dev->ofdev.dev, + "irda_setup timed out on speed mode byte\n"); + goto out; + } + udelay(10); + } + t = read_zsdata(uap); + if (t != cmdbyte) + dev_err(&uap->dev->ofdev.dev, + "irda_setup speed mode byte = %x (%x)\n", t, cmdbyte); + + dev_info(&uap->dev->ofdev.dev, "IrDA setup for %ld bps, dongle version: %d\n", + *baud, version); + + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); + + out: + /* Switch back to data mode */ + uap->curregs[R5] &= ~DTR; + write_zsreg(uap, R5, uap->curregs[R5]); + zssync(uap); + + (void)read_zsdata(uap); + (void)read_zsdata(uap); + (void)read_zsdata(uap); +} + + +static void __pmz_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long baud; + + pmz_debug("pmz: set_termios()\n"); + + if (ZS_IS_ASLEEP(uap)) + return; + + memcpy(&uap->termios_cache, termios, sizeof(struct termios)); + + /* XXX Check which revs of machines actually allow 1 and 4Mb speeds + * on the IR dongle. Note that the IRTTY driver currently doesn't know + * about the FIR mode and high speed modes. So these are unused. For + * implementing proper support for these, we should probably add some + * DMA as well, at least on the Rx side, which isn't a simple thing + * at this point. + */ + if (ZS_IS_IRDA(uap)) { + /* Calc baud rate */ + baud = uart_get_baud_rate(port, termios, old, 1200, 4000000); + pmz_debug("pmz: switch IRDA to %ld bauds\n", baud); + /* Cet the irda codec to the right rate */ + pmz_irda_setup(uap, &baud); + /* Set final baud rate */ + pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); + pmz_load_zsregs(uap, uap->curregs); + zssync(uap); + } else { + baud = uart_get_baud_rate(port, termios, old, 1200, 230400); + pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud); + /* Make sure modem status interrupts are correctly configured */ + if (UART_ENABLE_MS(&uap->port, termios->c_cflag)) { + uap->curregs[R15] |= DCDIE | SYNCIE | CTSIE; + uap->flags |= PMACZILOG_FLAG_MODEM_STATUS; + } else { + uap->curregs[R15] &= ~(DCDIE | SYNCIE | CTSIE); + uap->flags &= ~PMACZILOG_FLAG_MODEM_STATUS; + } + + /* Load registers to the chip */ + pmz_maybe_update_regs(uap); + } + uart_update_timeout(port, termios->c_cflag, baud); + + pmz_debug("pmz: set_termios() done.\n"); +} + +/* The port lock is not held. */ +static void pmz_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct uart_pmac_port *uap = to_pmz(port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable IRQs on the port */ + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + write_zsreg(uap, R1, uap->curregs[R1]); + + /* Setup new port configuration */ + __pmz_set_termios(port, termios, old); + + /* Re-enable IRQs on the port */ + if (ZS_IS_OPEN(uap)) { + uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; + if (!ZS_IS_EXTCLK(uap)) + uap->curregs[R1] |= EXT_INT_ENAB; + write_zsreg(uap, R1, uap->curregs[R1]); + } + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *pmz_type(struct uart_port *port) +{ + struct uart_pmac_port *uap = to_pmz(port); + + if (ZS_IS_IRDA(uap)) + return "Z85c30 ESCC - Infrared port"; + else if (ZS_IS_INTMODEM(uap)) + return "Z85c30 ESCC - Internal modem"; + return "Z85c30 ESCC - Serial port"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void pmz_release_port(struct uart_port *port) +{ +} + +static int pmz_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void pmz_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops pmz_pops = { + .tx_empty = pmz_tx_empty, + .set_mctrl = pmz_set_mctrl, + .get_mctrl = pmz_get_mctrl, + .stop_tx = pmz_stop_tx, + .start_tx = pmz_start_tx, + .stop_rx = pmz_stop_rx, + .enable_ms = pmz_enable_ms, + .break_ctl = pmz_break_ctl, + .startup = pmz_startup, + .shutdown = pmz_shutdown, + .set_termios = pmz_set_termios, + .type = pmz_type, + .release_port = pmz_release_port, + .request_port = pmz_request_port, + .config_port = pmz_config_port, + .verify_port = pmz_verify_port, +}; + +/* + * Setup one port structure after probing, HW is down at this point, + * Unlike sunzilog, we don't need to pre-init the spinlock as we don't + * register our console before uart_add_one_port() is called + */ +static int __init pmz_init_port(struct uart_pmac_port *uap) +{ + struct device_node *np = uap->node; + char *conn; + struct slot_names_prop { + int count; + char name[1]; + } *slots; + int len; + + /* + * Request & map chip registers + */ + uap->port.mapbase = np->addrs[0].address; + uap->port.membase = ioremap(uap->port.mapbase, 0x1000); + + uap->control_reg = uap->port.membase; + uap->data_reg = uap->control_reg + 0x10; + + /* + * Request & map DBDMA registers + */ +#ifdef HAS_DBDMA + if (np->n_addrs >= 3 && np->n_intrs >= 3) + uap->flags |= PMACZILOG_FLAG_HAS_DMA; +#endif + if (ZS_HAS_DMA(uap)) { + uap->tx_dma_regs = ioremap(np->addrs[np->n_addrs - 2].address, 0x1000); + if (uap->tx_dma_regs == NULL) { + uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; + goto no_dma; + } + uap->rx_dma_regs = ioremap(np->addrs[np->n_addrs - 1].address, 0x1000); + if (uap->rx_dma_regs == NULL) { + iounmap(uap->tx_dma_regs); + uap->tx_dma_regs = NULL; + uap->flags &= ~PMACZILOG_FLAG_HAS_DMA; + goto no_dma; + } + uap->tx_dma_irq = np->intrs[1].line; + uap->rx_dma_irq = np->intrs[2].line; + } +no_dma: + + /* + * Detect port type + */ + if (device_is_compatible(np, "cobalt")) + uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; + conn = get_property(np, "AAPL,connector", &len); + if (conn && (strcmp(conn, "infrared") == 0)) + uap->flags |= PMACZILOG_FLAG_IS_IRDA; + uap->port_type = PMAC_SCC_ASYNC; + /* 1999 Powerbook G3 has slot-names property instead */ + slots = (struct slot_names_prop *)get_property(np, "slot-names", &len); + if (slots && slots->count > 0) { + if (strcmp(slots->name, "IrDA") == 0) + uap->flags |= PMACZILOG_FLAG_IS_IRDA; + else if (strcmp(slots->name, "Modem") == 0) + uap->flags |= PMACZILOG_FLAG_IS_INTMODEM; + } + if (ZS_IS_IRDA(uap)) + uap->port_type = PMAC_SCC_IRDA; + if (ZS_IS_INTMODEM(uap)) { + struct device_node* i2c_modem = find_devices("i2c-modem"); + if (i2c_modem) { + char* mid = get_property(i2c_modem, "modem-id", NULL); + if (mid) switch(*mid) { + case 0x04 : + case 0x05 : + case 0x07 : + case 0x08 : + case 0x0b : + case 0x0c : + uap->port_type = PMAC_SCC_I2S1; + } + printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n", + mid ? (*mid) : 0); + } else { + printk(KERN_INFO "pmac_zilog: serial modem detected\n"); + } + } + + /* + * Init remaining bits of "port" structure + */ + uap->port.iotype = SERIAL_IO_MEM; + uap->port.irq = np->intrs[0].line; + uap->port.uartclk = ZS_CLOCK; + uap->port.fifosize = 1; + uap->port.ops = &pmz_pops; + uap->port.type = PORT_PMAC_ZILOG; + uap->port.flags = 0; + + /* Setup some valid baud rate information in the register + * shadows so we don't write crap there before baud rate is + * first initialized. + */ + pmz_convert_to_zs(uap, CS8, 0, 9600); + + return 0; +} + +/* + * Get rid of a port on module removal + */ +static void pmz_dispose_port(struct uart_pmac_port *uap) +{ + struct device_node *np; + + np = uap->node; + iounmap(uap->rx_dma_regs); + iounmap(uap->tx_dma_regs); + iounmap(uap->control_reg); + uap->node = NULL; + of_node_put(np); + memset(uap, 0, sizeof(struct uart_pmac_port)); +} + +/* + * Called upon match with an escc node in the devive-tree. + */ +static int pmz_attach(struct macio_dev *mdev, const struct of_match *match) +{ + int i; + + /* Iterate the pmz_ports array to find a matching entry + */ + for (i = 0; i < MAX_ZS_PORTS; i++) + if (pmz_ports[i].node == mdev->ofdev.node) { + struct uart_pmac_port *uap = &pmz_ports[i]; + + uap->dev = mdev; + dev_set_drvdata(&mdev->ofdev.dev, uap); + if (macio_request_resources(uap->dev, "pmac_zilog")) + printk(KERN_WARNING "%s: Failed to request resource" + ", port still active\n", + uap->node->name); + else + uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED; + return 0; + } + return -ENODEV; +} + +/* + * That one should not be called, macio isn't really a hotswap device, + * we don't expect one of those serial ports to go away... + */ +static int pmz_detach(struct macio_dev *mdev) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + + if (!uap) + return -ENODEV; + + if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) { + macio_release_resources(uap->dev); + uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED; + } + dev_set_drvdata(&mdev->ofdev.dev, NULL); + uap->dev = NULL; + + return 0; +} + + +static int pmz_suspend(struct macio_dev *mdev, u32 pm_state) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + struct uart_state *state; + unsigned long flags; + + if (uap == NULL) { + printk("HRM... pmz_suspend with NULL uap\n"); + return 0; + } + + if (pm_state == mdev->ofdev.dev.power.power_state || pm_state < 2) + return 0; + + pmz_debug("suspend, switching to state %d\n", pm_state); + + state = pmz_uart_reg.state + uap->port.line; + + down(&pmz_irq_sem); + down(&state->sem); + + spin_lock_irqsave(&uap->port.lock, flags); + + if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) { + /* Disable receiver and transmitter. */ + uap->curregs[R3] &= ~RxENABLE; + uap->curregs[R5] &= ~TxENABLE; + + /* Disable all interrupts and BRK assertion. */ + uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + uap->curregs[R5] &= ~SND_BRK; + pmz_load_zsregs(uap, uap->curregs); + uap->flags |= PMACZILOG_FLAG_IS_ASLEEP; + mb(); + } + + spin_unlock_irqrestore(&uap->port.lock, flags); + + if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate)) + if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) { + pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON; + disable_irq(uap->port.irq); + } + + if (ZS_IS_CONS(uap)) + uap->port.cons->flags &= ~CON_ENABLED; + + /* Shut the chip down */ + pmz_set_scc_power(uap, 0); + + up(&state->sem); + up(&pmz_irq_sem); + + pmz_debug("suspend, switching complete\n"); + + mdev->ofdev.dev.power.power_state = pm_state; + + return 0; +} + + +static int pmz_resume(struct macio_dev *mdev) +{ + struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev); + struct uart_state *state; + unsigned long flags; + int pwr_delay = 0; + + if (uap == NULL) + return 0; + + if (mdev->ofdev.dev.power.power_state == 0) + return 0; + + pmz_debug("resume, switching to state 0\n"); + + state = pmz_uart_reg.state + uap->port.line; + + down(&pmz_irq_sem); + down(&state->sem); + + spin_lock_irqsave(&uap->port.lock, flags); + if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) { + spin_unlock_irqrestore(&uap->port.lock, flags); + goto bail; + } + pwr_delay = __pmz_startup(uap); + + /* Take care of config that may have changed while asleep */ + __pmz_set_termios(&uap->port, &uap->termios_cache, NULL); + + if (ZS_IS_OPEN(uap)) { + /* Enable interrupts */ + uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB; + if (!ZS_IS_EXTCLK(uap)) + uap->curregs[R1] |= EXT_INT_ENAB; + write_zsreg(uap, R1, uap->curregs[R1]); + } + + spin_unlock_irqrestore(&uap->port.lock, flags); + + if (ZS_IS_CONS(uap)) + uap->port.cons->flags |= CON_ENABLED; + + /* Re-enable IRQ on the controller */ + if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) { + pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON; + enable_irq(uap->port.irq); + } + + bail: + up(&state->sem); + up(&pmz_irq_sem); + + /* Right now, we deal with delay by blocking here, I'll be + * smarter later on + */ + if (pwr_delay != 0) { + pmz_debug("pmz: delaying %d ms\n", pwr_delay); + msleep(pwr_delay); + } + + pmz_debug("resume, switching complete\n"); + + mdev->ofdev.dev.power.power_state = 0; + + return 0; +} + +/* + * Probe all ports in the system and build the ports array, we register + * with the serial layer at this point, the macio-type probing is only + * used later to "attach" to the sysfs tree so we get power management + * events + */ +static int __init pmz_probe(void) +{ + struct device_node *node_p, *node_a, *node_b, *np; + int count = 0; + int rc; + + /* + * Find all escc chips in the system + */ + node_p = of_find_node_by_name(NULL, "escc"); + while (node_p) { + /* + * First get channel A/B node pointers + * + * TODO: Add routines with proper locking to do that... + */ + node_a = node_b = NULL; + for (np = NULL; (np = of_get_next_child(node_p, np)) != NULL;) { + if (strncmp(np->name, "ch-a", 4) == 0) + node_a = of_node_get(np); + else if (strncmp(np->name, "ch-b", 4) == 0) + node_b = of_node_get(np); + } + if (!node_a && !node_b) { + of_node_put(node_a); + of_node_put(node_b); + printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n", + (!node_a) ? 'a' : 'b', node_p->full_name); + goto next; + } + + /* + * Fill basic fields in the port structures + */ + pmz_ports[count].mate = &pmz_ports[count+1]; + pmz_ports[count+1].mate = &pmz_ports[count]; + pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A; + pmz_ports[count].node = node_a; + pmz_ports[count+1].node = node_b; + pmz_ports[count].port.line = count; + pmz_ports[count+1].port.line = count+1; + + /* + * Setup the ports for real + */ + rc = pmz_init_port(&pmz_ports[count]); + if (rc == 0 && node_b != NULL) + rc = pmz_init_port(&pmz_ports[count+1]); + if (rc != 0) { + of_node_put(node_a); + of_node_put(node_b); + memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port)); + memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port)); + goto next; + } + count += 2; +next: + node_p = of_find_node_by_name(node_p, "escc"); + } + pmz_ports_count = count; + + return 0; +} + +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + +static void pmz_console_write(struct console *con, const char *s, unsigned int count); +static int __init pmz_console_setup(struct console *co, char *options); + +static struct console pmz_console = { + .name = "ttyS", + .write = pmz_console_write, + .device = uart_console_device, + .setup = pmz_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &pmz_uart_reg, +}; + +#define PMACZILOG_CONSOLE &pmz_console +#else /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ +#define PMACZILOG_CONSOLE (NULL) +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + +/* + * Register the driver, console driver and ports with the serial + * core + */ +static int __init pmz_register(void) +{ + int i, rc; + + pmz_uart_reg.nr = pmz_ports_count; + pmz_uart_reg.cons = PMACZILOG_CONSOLE; + pmz_uart_reg.minor = 64; + + /* + * Register this driver with the serial core + */ + rc = uart_register_driver(&pmz_uart_reg); + if (rc) + return rc; + + /* + * Register each port with the serial core + */ + for (i = 0; i < pmz_ports_count; i++) { + struct uart_pmac_port *uport = &pmz_ports[i]; + /* NULL node may happen on wallstreet */ + if (uport->node != NULL) + rc = uart_add_one_port(&pmz_uart_reg, &uport->port); + if (rc) + goto err_out; + } + + return 0; +err_out: + while (i-- > 0) { + struct uart_pmac_port *uport = &pmz_ports[i]; + uart_remove_one_port(&pmz_uart_reg, &uport->port); + } + uart_unregister_driver(&pmz_uart_reg); + return rc; +} + +static struct of_match pmz_match[] = +{ + { + .name = "ch-a", + .type = OF_ANY_MATCH, + .compatible = OF_ANY_MATCH + }, + { + .name = "ch-b", + .type = OF_ANY_MATCH, + .compatible = OF_ANY_MATCH + }, + {}, +}; + +static struct macio_driver pmz_driver = +{ + .name = "pmac_zilog", + .match_table = pmz_match, + .probe = pmz_attach, + .remove = pmz_detach, + .suspend = pmz_suspend, + .resume = pmz_resume, +}; + +static int __init init_pmz(void) +{ + int rc, i; + printk(KERN_INFO "%s\n", version); + + /* + * First, we need to do a direct OF-based probe pass. We + * do that because we want serial console up before the + * macio stuffs calls us back, and since that makes it + * easier to pass the proper number of channels to + * uart_register_driver() + */ + if (pmz_ports_count == 0) + pmz_probe(); + + /* + * Bail early if no port found + */ + if (pmz_ports_count == 0) + return -ENODEV; + + /* + * Now we register with the serial layer + */ + rc = pmz_register(); + if (rc) { + printk(KERN_ERR + "pmac_zilog: Error registering serial device, disabling pmac_zilog.\n" + "pmac_zilog: Did another serial driver already claim the minors?\n"); + /* effectively "pmz_unprobe()" */ + for (i=0; i < pmz_ports_count; i++) + pmz_dispose_port(&pmz_ports[i]); + return rc; + } + + /* + * Then we register the macio driver itself + */ + return macio_register_driver(&pmz_driver); +} + +static void __exit exit_pmz(void) +{ + int i; + + /* Get rid of macio-driver (detach from macio) */ + macio_unregister_driver(&pmz_driver); + + for (i = 0; i < pmz_ports_count; i++) { + struct uart_pmac_port *uport = &pmz_ports[i]; + if (uport->node != NULL) { + uart_remove_one_port(&pmz_uart_reg, &uport->port); + pmz_dispose_port(uport); + } + } + /* Unregister UART driver */ + uart_unregister_driver(&pmz_uart_reg); +} + +#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void pmz_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_pmac_port *uap = &pmz_ports[con->index]; + unsigned long flags; + int i; + + if (ZS_IS_ASLEEP(uap)) + return; + spin_lock_irqsave(&uap->port.lock, flags); + + /* Turn of interrupts and enable the transmitter. */ + write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB); + write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR); + + for (i = 0; i < count; i++) { + /* Wait for the transmit buffer to empty. */ + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, s[i]); + if (s[i] == 10) { + while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0) + udelay(5); + write_zsdata(uap, R13); + } + } + + /* Restore the values in the registers. */ + write_zsreg(uap, R1, uap->curregs[1]); + /* Don't disable the transmitter. */ + + spin_unlock_irqrestore(&uap->port.lock, flags); +} + +/* + * Setup the serial console + */ +static int __init pmz_console_setup(struct console *co, char *options) +{ + struct uart_pmac_port *uap; + struct uart_port *port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + unsigned long pwr_delay; + + /* + * XServe's default to 57600 bps + */ + if (machine_is_compatible("RackMac1,1") + || machine_is_compatible("RackMac1,2") + || machine_is_compatible("MacRISC4")) + baud = 57600; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= pmz_ports_count) + co->index = 0; + uap = &pmz_ports[co->index]; + if (uap->node == NULL) + return -ENODEV; + port = &uap->port; + + /* + * Mark port as beeing a console + */ + uap->flags |= PMACZILOG_FLAG_IS_CONS; + + /* + * Temporary fix for uart layer who didn't setup the spinlock yet + */ + spin_lock_init(&port->lock); + + /* + * Enable the hardware + */ + pwr_delay = __pmz_startup(uap); + if (pwr_delay) + mdelay(pwr_delay); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static int __init pmz_console_init(void) +{ + /* Probe ports */ + pmz_probe(); + + /* TODO: Autoprobe console based on OF */ + /* pmz_console.index = i; */ + register_console(&pmz_console); + + return 0; + +} +console_initcall(pmz_console_init); +#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ + +module_init(init_pmz); +module_exit(exit_pmz); diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h new file mode 100644 index 000000000000..c03f9bfacdd8 --- /dev/null +++ b/drivers/serial/pmac_zilog.h @@ -0,0 +1,382 @@ +#ifndef __PMAC_ZILOG_H__ +#define __PMAC_ZILOG_H__ + +#define pmz_debug(fmt,arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg) + +/* + * At most 2 ESCCs with 2 ports each + */ +#define MAX_ZS_PORTS 4 + +/* + * We wrap our port structure around the generic uart_port. + */ +#define NUM_ZSREGS 17 + +struct uart_pmac_port { + struct uart_port port; + struct uart_pmac_port *mate; + + /* macio_dev for the escc holding this port (maybe be null on + * early inited port) + */ + struct macio_dev *dev; + /* device node to this port, this points to one of 2 childs + * of "escc" node (ie. ch-a or ch-b) + */ + struct device_node *node; + + /* Port type as obtained from device tree (IRDA, modem, ...) */ + int port_type; + u8 curregs[NUM_ZSREGS]; + + unsigned int flags; +#define PMACZILOG_FLAG_IS_CONS 0x00000001 +#define PMACZILOG_FLAG_IS_KGDB 0x00000002 +#define PMACZILOG_FLAG_MODEM_STATUS 0x00000004 +#define PMACZILOG_FLAG_IS_CHANNEL_A 0x00000008 +#define PMACZILOG_FLAG_REGS_HELD 0x00000010 +#define PMACZILOG_FLAG_TX_STOPPED 0x00000020 +#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040 +#define PMACZILOG_FLAG_ENABLED 0x00000080 +#define PMACZILOG_FLAG_IS_IRDA 0x00000100 +#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200 +#define PMACZILOG_FLAG_HAS_DMA 0x00000400 +#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800 +#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000 +#define PMACZILOG_FLAG_IS_OPEN 0x00002000 +#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000 +#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000 +#define PMACZILOG_FLAG_BREAK 0x00010000 + + unsigned char parity_mask; + unsigned char prev_status; + + volatile u8 __iomem *control_reg; + volatile u8 __iomem *data_reg; + + unsigned int tx_dma_irq; + unsigned int rx_dma_irq; + volatile struct dbdma_regs __iomem *tx_dma_regs; + volatile struct dbdma_regs __iomem *rx_dma_regs; + + struct termios termios_cache; +}; + +#define to_pmz(p) ((struct uart_pmac_port *)(p)) + +static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap) +{ + if (uap->flags & PMACZILOG_FLAG_IS_CHANNEL_A) + return uap; + return uap->mate; +} + +/* + * Register acessors. Note that we don't need to enforce a recovery + * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip, + * though if we try to use this driver on older machines, we might have + * to add it back + */ +static inline u8 read_zsreg(struct uart_pmac_port *port, u8 reg) +{ + if (reg != 0) + writeb(reg, port->control_reg); + return readb(port->control_reg); +} + +static inline void write_zsreg(struct uart_pmac_port *port, u8 reg, u8 value) +{ + if (reg != 0) + writeb(reg, port->control_reg); + writeb(value, port->control_reg); +} + +static inline u8 read_zsdata(struct uart_pmac_port *port) +{ + return readb(port->data_reg); +} + +static inline void write_zsdata(struct uart_pmac_port *port, u8 data) +{ + writeb(data, port->data_reg); +} + +static inline void zssync(struct uart_pmac_port *port) +{ + (void)readb(port->control_reg); +} + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */ + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 +#define R7P 16 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* W/Req reflects recv if 1, xmit if 0 */ +#define WT_FN_RDYFN 0x40 /* W/Req pin is DMA request if 1, wait if 0 */ +#define WT_RDY_ENAB 0x80 /* Enable W/Req pin */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENABLE 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ +#define SB_MASK 0xc + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENABLE 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 7' (Some enhanced feature control) */ +#define ENEXREAD 0x40 /* Enable read of some write registers */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define EN85C30 1 /* Enable some 85c30-enhanced registers */ +#define ZCIE 2 /* Zero count IE */ +#define ENSTFIFO 4 /* Enable status FIFO (SDLC) */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC_HUNT 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x06 + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(port) (write_zsreg(port, 0, ERR_RES)) +#define ZS_CLEARFIFO(port) do { volatile unsigned char garbage; \ + garbage = read_zsdata(port); \ + garbage = read_zsdata(port); \ + garbage = read_zsdata(port); \ + } while(0) + +#define ZS_IS_CONS(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & PMACZILOG_FLAG_IS_KGDB) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & PMACZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & PMACZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA) +#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM) +#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA) +#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP) +#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN) +#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON) +#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK) + +#endif /* __PMAC_ZILOG_H__ */ diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c new file mode 100644 index 000000000000..68b25b2c26b1 --- /dev/null +++ b/drivers/serial/pxa.c @@ -0,0 +1,877 @@ +/* + * linux/drivers/serial/pxa.c + * + * Based on drivers/serial/8250.c by Russell King. + * + * Author: Nicolas Pitre + * Created: Feb 20, 2003 + * Copyright: (C) 2003 Monta Vista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Note 1: This driver is made separate from the already too overloaded + * 8250.c because it needs some kirks of its own and that'll make it + * easier to add DMA support. + * + * Note 2: I'm too sick of device allocation policies for serial ports. + * If someone else wants to request an "official" allocation of major/minor + * for this driver please be my guest. And don't forget that new hardware + * to come from Intel might have more than 3 or 4 of those UARTs. Let's + * hope for a better port registration and dynamic device allocation scheme + * with the serial core maintainer satisfaction to appear soon. + */ + +#include + +#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + + +struct uart_pxa_port { + struct uart_port port; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned int lsr_break_flag; + unsigned int cken; + char *name; +}; + +static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) +{ + offset <<= 2; + return readl(up->port.membase + offset); +} + +static inline void serial_out(struct uart_pxa_port *up, int offset, int value) +{ + offset <<= 2; + writel(value, up->port.membase + offset); +} + +static void serial_pxa_enable_ms(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void serial_pxa_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_pxa_stop_rx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static inline void +receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs) +{ + struct tty_struct *tty = up->port.info->tty; + unsigned int ch, flag; + int max_count = 256; + + do { + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + /* + * If this failed then we will throw away the + * bytes but must do so to clear interrupts + */ + } + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_PXA_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch, regs)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if ((*status & UART_LSR_OE) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(tty); +} + +static void transmit_chars(struct uart_pxa_port *up) +{ + struct circ_buf *xmit = &up->port.info->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_pxa_stop_tx(&up->port, 0); + return; + } + + count = up->port.fifosize / 2; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + + if (uart_circ_empty(xmit)) + serial_pxa_stop_tx(&up->port, 0); +} + +static void serial_pxa_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static inline void check_modem_status(struct uart_pxa_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.info->delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static inline irqreturn_t +serial_pxa_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)dev_id; + unsigned int iir, lsr; + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + lsr = serial_in(up, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr, regs); + check_modem_status(up); + if (lsr & UART_LSR_THRE) + transmit_chars(up); + return IRQ_HANDLED; +} + +static unsigned int serial_pxa_tx_empty(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_pxa_get_mctrl(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + unsigned char status; + unsigned int ret; + +return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + spin_lock_irqsave(&up->port.lock, flags); + status = serial_in(up, UART_MSR); + spin_unlock_irqrestore(&up->port.lock, flags); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial_pxa_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +#if 0 +static void serial_pxa_dma_init(struct pxa_uart *up) +{ + up->rxdma = + pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up); + if (up->rxdma < 0) + goto out; + up->txdma = + pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up); + if (up->txdma < 0) + goto err_txdma; + up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL); + if (!up->dmadesc) + goto err_alloc; + + /* ... */ +err_alloc: + pxa_free_dma(up->txdma); +err_rxdma: + pxa_free_dma(up->rxdma); +out: + return; +} +#endif + +static int serial_pxa_startup(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + int retval; + + up->mcr = 0; + + /* + * Allocate the IRQ + */ + retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up); + if (retval) + return retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); + + /* + * Clear the interrupt registers. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl |= TIOCM_OUT2; + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occuring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; + serial_out(up, UART_IER, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + return 0; +} + +static void serial_pxa_shutdown(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + + free_irq(up->port.irq, up); + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_out(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +static void +serial_pxa_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + default: + case CS8: + cval = 0x03; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= 0x04; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Ensure the port will be enabled. + * This is required especially for serial console. + */ + up->ier |= IER_UUE; + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, quot); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + serial_out(up, UART_FCR, fcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_pxa_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + pxa_set_cken(up->cken, !state); + if (!state) + udelay(1); +} + +static void serial_pxa_release_port(struct uart_port *port) +{ +} + +static int serial_pxa_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_pxa_config_port(struct uart_port *port, int flags) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + up->port.type = PORT_PXA; +} + +static int +serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static const char * +serial_pxa_type(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + return up->name; +} + +#ifdef CONFIG_SERIAL_PXA_CONSOLE + +extern struct uart_pxa_port serial_pxa_ports[]; +extern struct uart_driver serial_pxa_reg; + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_pxa_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_pxa_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_pxa_port *up = &serial_pxa_ports[co->index]; + unsigned int ier; + int i; + + /* + * First save the UER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, UART_IER_UUE); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++, s++) { + wait_for_xmitr(up); + + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, *s); + if (*s == 10) { + wait_for_xmitr(up); + serial_out(up, UART_TX, 13); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); +} + +static int __init +serial_pxa_console_setup(struct console *co, char *options) +{ + struct uart_pxa_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index == -1 || co->index >= serial_pxa_reg.nr) + co->index = 0; + up = &serial_pxa_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console serial_pxa_console = { + .name = "ttyS", + .write = serial_pxa_console_write, + .device = uart_console_device, + .setup = serial_pxa_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_pxa_reg, +}; + +static int __init +serial_pxa_console_init(void) +{ + register_console(&serial_pxa_console); + return 0; +} + +console_initcall(serial_pxa_console_init); + +#define PXA_CONSOLE &serial_pxa_console +#else +#define PXA_CONSOLE NULL +#endif + +struct uart_ops serial_pxa_pops = { + .tx_empty = serial_pxa_tx_empty, + .set_mctrl = serial_pxa_set_mctrl, + .get_mctrl = serial_pxa_get_mctrl, + .stop_tx = serial_pxa_stop_tx, + .start_tx = serial_pxa_start_tx, + .stop_rx = serial_pxa_stop_rx, + .enable_ms = serial_pxa_enable_ms, + .break_ctl = serial_pxa_break_ctl, + .startup = serial_pxa_startup, + .shutdown = serial_pxa_shutdown, + .set_termios = serial_pxa_set_termios, + .pm = serial_pxa_pm, + .type = serial_pxa_type, + .release_port = serial_pxa_release_port, + .request_port = serial_pxa_request_port, + .config_port = serial_pxa_config_port, + .verify_port = serial_pxa_verify_port, +}; + +static struct uart_pxa_port serial_pxa_ports[] = { + { /* FFUART */ + .name = "FFUART", + .cken = CKEN6_FFUART, + .port = { + .type = PORT_PXA, + .iotype = UPIO_MEM, + .membase = (void *)&FFUART, + .mapbase = __PREG(FFUART), + .irq = IRQ_FFUART, + .uartclk = 921600 * 16, + .fifosize = 64, + .ops = &serial_pxa_pops, + .line = 0, + }, + }, { /* BTUART */ + .name = "BTUART", + .cken = CKEN7_BTUART, + .port = { + .type = PORT_PXA, + .iotype = UPIO_MEM, + .membase = (void *)&BTUART, + .mapbase = __PREG(BTUART), + .irq = IRQ_BTUART, + .uartclk = 921600 * 16, + .fifosize = 64, + .ops = &serial_pxa_pops, + .line = 1, + }, + }, { /* STUART */ + .name = "STUART", + .cken = CKEN5_STUART, + .port = { + .type = PORT_PXA, + .iotype = UPIO_MEM, + .membase = (void *)&STUART, + .mapbase = __PREG(STUART), + .irq = IRQ_STUART, + .uartclk = 921600 * 16, + .fifosize = 64, + .ops = &serial_pxa_pops, + .line = 2, + }, + } +}; + +static struct uart_driver serial_pxa_reg = { + .owner = THIS_MODULE, + .driver_name = "PXA serial", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = ARRAY_SIZE(serial_pxa_ports), + .cons = PXA_CONSOLE, +}; + +static int serial_pxa_suspend(struct device *_dev, u32 state, u32 level) +{ + struct uart_pxa_port *sport = dev_get_drvdata(_dev); + + if (sport && level == SUSPEND_DISABLE) + uart_suspend_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static int serial_pxa_resume(struct device *_dev, u32 level) +{ + struct uart_pxa_port *sport = dev_get_drvdata(_dev); + + if (sport && level == RESUME_ENABLE) + uart_resume_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static int serial_pxa_probe(struct device *_dev) +{ + struct platform_device *dev = to_platform_device(_dev); + + serial_pxa_ports[dev->id].port.dev = _dev; + uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port); + dev_set_drvdata(_dev, &serial_pxa_ports[dev->id]); + return 0; +} + +static int serial_pxa_remove(struct device *_dev) +{ + struct uart_pxa_port *sport = dev_get_drvdata(_dev); + + dev_set_drvdata(_dev, NULL); + + if (sport) + uart_remove_one_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static struct device_driver serial_pxa_driver = { + .name = "pxa2xx-uart", + .bus = &platform_bus_type, + .probe = serial_pxa_probe, + .remove = serial_pxa_remove, + + .suspend = serial_pxa_suspend, + .resume = serial_pxa_resume, +}; + +int __init serial_pxa_init(void) +{ + int ret; + + ret = uart_register_driver(&serial_pxa_reg); + if (ret != 0) + return ret; + + ret = driver_register(&serial_pxa_driver); + if (ret != 0) + uart_unregister_driver(&serial_pxa_reg); + + return ret; +} + +void __exit serial_pxa_exit(void) +{ + driver_unregister(&serial_pxa_driver); + uart_unregister_driver(&serial_pxa_reg); +} + +module_init(serial_pxa_init); +module_exit(serial_pxa_exit); + +MODULE_LICENSE("GPL"); + diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c new file mode 100644 index 000000000000..ffc61389614b --- /dev/null +++ b/drivers/serial/s3c2410.c @@ -0,0 +1,1831 @@ +/* + * linux/drivers/serial/s3c2410.c + * + * Driver for onboard UARTs on the Samsung S3C24XX + * + * Based on drivers/char/serial.c and drivers/char/21285.c + * + * Ben Dooks, (c) 2003-2005 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * Changelog: + * + * 22-Jul-2004 BJD Finished off device rewrite + * + * 21-Jul-2004 BJD Thanks to for pointing out + * problems with baud rate and loss of IR settings. Update + * to add configuration via platform_device structure + * + * 28-Sep-2004 BJD Re-write for the following items + * - S3C2410 and S3C2440 serial support + * - Power Management support + * - Fix console via IrDA devices + * - SysReq (Herbert Pötzl) + * - Break character handling (Herbert Pötzl) + * - spin-lock initialisation (Dimitry Andric) + * - added clock control + * - updated init code to use platform_device info + * + * 06-Mar-2005 BJD Add s3c2440 fclk clock source + * + * 09-Mar-2005 BJD Add s3c2400 support + * + * 10-Mar-2005 LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART +*/ + +/* Note on 2440 fclk clock source handling + * + * Whilst it is possible to use the fclk as clock source, the method + * of properly switching too/from this is currently un-implemented, so + * whichever way is configured at startup is the one that will be used. +*/ + +/* Hote on 2410 error handling + * + * The s3c2410 manual has a love/hate affair with the contents of the + * UERSTAT register in the UART blocks, and keeps marking some of the + * error bits as reserved. Having checked with the s3c2410x01, + * it copes with BREAKs properly, so I am happy to ignore the RESERVED + * feature from the latter versions of the manual. + * + * If it becomes aparrent that latter versions of the 2410 remove these + * bits, then action will have to be taken to differentiate the versions + * and change the policy on BREAK + * + * BJD, 04-Nov-2004 +*/ + +#include + +#if defined(CONFIG_SERIAL_S3C2410_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include +#include + +#include + +/* structures */ + +struct s3c24xx_uart_info { + char *name; + unsigned int type; + unsigned int fifosize; + unsigned long rx_fifomask; + unsigned long rx_fifoshift; + unsigned long rx_fifofull; + unsigned long tx_fifomask; + unsigned long tx_fifoshift; + unsigned long tx_fifofull; + + /* clock source control */ + + int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); + int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); + + /* uart controls */ + int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *); +}; + +struct s3c24xx_uart_port { + unsigned char rx_claimed; + unsigned char tx_claimed; + + struct s3c24xx_uart_info *info; + struct s3c24xx_uart_clksrc *clksrc; + struct clk *clk; + struct clk *baudclk; + struct uart_port port; +}; + + +/* configuration defines */ + +#if 0 +#if 1 +/* send debug to the low-level output routines */ + +extern void printascii(const char *); + +static void +s3c24xx_serial_dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsprintf(buff, fmt, va); + va_end(va); + + printascii(buff); +} + +#define dbg(x...) s3c24xx_serial_dbg(x) + +#else +#define dbg(x...) printk(KERN_DEBUG "s3c24xx: "); +#endif +#else /* no debug */ +#define dbg(x...) do {} while(0) +#endif + +/* UART name and device definitions */ + +#define S3C24XX_SERIAL_NAME "ttySAC" +#define S3C24XX_SERIAL_DEVFS "tts/" +#define S3C24XX_SERIAL_MAJOR 204 +#define S3C24XX_SERIAL_MINOR 64 + + +/* conversion functions */ + +#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev) +#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data) + +/* we can support 3 uarts, but not always use them */ + +#define NR_PORTS (3) + +/* port irq numbers */ + +#define TX_IRQ(port) ((port)->irq + 1) +#define RX_IRQ(port) ((port)->irq) + +/* register access controls */ + +#define portaddr(port, reg) ((port)->membase + (reg)) + +#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg))) +#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) + +#define wr_regb(port, reg, val) \ + do { __raw_writeb(val, portaddr(port, reg)); } while(0) + +#define wr_regl(port, reg, val) \ + do { __raw_writel(val, portaddr(port, reg)); } while(0) + +/* macros to change one thing to another */ + +#define tx_enabled(port) ((port)->unused[0]) +#define rx_enabled(port) ((port)->unused[1]) + +/* flag to ignore all characters comming in */ +#define RXSTAT_DUMMY_READ (0x10000000) + +static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port) +{ + return container_of(port, struct s3c24xx_uart_port, port); +} + +/* translate a port to the device name */ + +static inline char *s3c24xx_serial_portname(struct uart_port *port) +{ + return to_platform_device(port->dev)->name; +} + +static int s3c24xx_serial_txempty_nofifo(struct uart_port *port) +{ + return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE); +} + +static void s3c24xx_serial_rx_enable(struct uart_port *port) +{ + unsigned long flags; + unsigned int ucon, ufcon; + int count = 10000; + + spin_lock_irqsave(&port->lock, flags); + + while (--count && !s3c24xx_serial_txempty_nofifo(port)) + udelay(100); + + ufcon = rd_regl(port, S3C2410_UFCON); + ufcon |= S3C2410_UFCON_RESETRX; + wr_regl(port, S3C2410_UFCON, ufcon); + + ucon = rd_regl(port, S3C2410_UCON); + ucon |= S3C2410_UCON_RXIRQMODE; + wr_regl(port, S3C2410_UCON, ucon); + + rx_enabled(port) = 1; + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c24xx_serial_rx_disable(struct uart_port *port) +{ + unsigned long flags; + unsigned int ucon; + + spin_lock_irqsave(&port->lock, flags); + + ucon = rd_regl(port, S3C2410_UCON); + ucon &= ~S3C2410_UCON_RXIRQMODE; + wr_regl(port, S3C2410_UCON, ucon); + + rx_enabled(port) = 0; + spin_unlock_irqrestore(&port->lock, flags); +} + +static void +s3c24xx_serial_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + if (tx_enabled(port)) { + disable_irq(TX_IRQ(port)); + tx_enabled(port) = 0; + if (port->flags & UPF_CONS_FLOW) + s3c24xx_serial_rx_enable(port); + } +} + +static void +s3c24xx_serial_start_tx(struct uart_port *port, unsigned int tty_start) +{ + if (!tx_enabled(port)) { + if (port->flags & UPF_CONS_FLOW) + s3c24xx_serial_rx_disable(port); + + enable_irq(TX_IRQ(port)); + tx_enabled(port) = 1; + } +} + + +static void s3c24xx_serial_stop_rx(struct uart_port *port) +{ + if (rx_enabled(port)) { + dbg("s3c24xx_serial_stop_rx: port=%p\n", port); + disable_irq(RX_IRQ(port)); + rx_enabled(port) = 0; + } +} + +static void s3c24xx_serial_enable_ms(struct uart_port *port) +{ +} + +static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port) +{ + return to_ourport(port)->info; +} + +static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port) +{ + if (port->dev == NULL) + return NULL; + + return (struct s3c2410_uartcfg *)port->dev->platform_data; +} + +static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, + unsigned long ufstat) +{ + struct s3c24xx_uart_info *info = ourport->info; + + if (ufstat & info->rx_fifofull) + return info->fifosize; + + return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; +} + + +/* ? - where has parity gone?? */ +#define S3C2410_UERSTAT_PARITY (0x1000) + +static irqreturn_t +s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs) +{ + struct s3c24xx_uart_port *ourport = dev_id; + struct uart_port *port = &ourport->port; + struct tty_struct *tty = port->info->tty; + unsigned int ufcon, ch, flag, ufstat, uerstat; + int max_count = 64; + + while (max_count-- > 0) { + ufcon = rd_regl(port, S3C2410_UFCON); + ufstat = rd_regl(port, S3C2410_UFSTAT); + + if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0) + break; + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + + /* + * If this failed then we will throw away the + * bytes but must do so to clear interrupts + */ + } + + uerstat = rd_regl(port, S3C2410_UERSTAT); + ch = rd_regb(port, S3C2410_URXH); + + if (port->flags & UPF_CONS_FLOW) { + int txe = s3c24xx_serial_txempty_nofifo(port); + + if (rx_enabled(port)) { + if (!txe) { + rx_enabled(port) = 0; + continue; + } + } else { + if (txe) { + ufcon |= S3C2410_UFCON_RESETRX; + wr_regl(port, S3C2410_UFCON, ufcon); + rx_enabled(port) = 1; + goto out; + } + continue; + } + } + + /* insert the character into the buffer */ + + flag = TTY_NORMAL; + port->icount.rx++; + + if (uerstat & S3C2410_UERSTAT_ANY) { + dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n", + ch, uerstat); + + /* check for break */ + if (uerstat & S3C2410_UERSTAT_BREAK) { + dbg("break!\n"); + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } + + if (uerstat & S3C2410_UERSTAT_FRAME) + port->icount.frame++; + if (uerstat & S3C2410_UERSTAT_OVERRUN) + port->icount.overrun++; + + uerstat &= port->read_status_mask; + + if (uerstat & S3C2410_UERSTAT_BREAK) + flag = TTY_BREAK; + else if (uerstat & S3C2410_UERSTAT_PARITY) + flag = TTY_PARITY; + else if (uerstat & ( S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_OVERRUN)) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch, regs)) + goto ignore_char; + + if ((uerstat & port->ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + + if ((uerstat & S3C2410_UERSTAT_OVERRUN) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + + ignore_char: + continue; + } + tty_flip_buffer_push(tty); + + out: + return IRQ_HANDLED; +} + +static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id, struct pt_regs *regs) +{ + struct s3c24xx_uart_port *ourport = id; + struct uart_port *port = &ourport->port; + struct circ_buf *xmit = &port->info->xmit; + int count = 256; + + if (port->x_char) { + wr_regb(port, S3C2410_UTXH, port->x_char); + port->icount.tx++; + port->x_char = 0; + goto out; + } + + /* if there isnt anything more to transmit, or the uart is now + * stopped, disable the uart and exit + */ + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + s3c24xx_serial_stop_tx(port, 0); + goto out; + } + + /* try and drain the buffer... */ + + while (!uart_circ_empty(xmit) && count-- > 0) { + if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull) + break; + + wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + s3c24xx_serial_stop_tx(port, 0); + + out: + return IRQ_HANDLED; +} + +static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT); + unsigned long ufcon = rd_regl(port, S3C2410_UFCON); + + if (ufcon & S3C2410_UFCON_FIFOMODE) { + if ((ufstat & info->tx_fifomask) != 0 || + (ufstat & info->tx_fifofull)) + return 0; + + return 1; + } + + return s3c24xx_serial_txempty_nofifo(port); +} + +/* no modem control lines */ +static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port) +{ + unsigned int umstat = rd_regb(port,S3C2410_UMSTAT); + + if (umstat & S3C2410_UMSTAT_CTS) + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; + else + return TIOCM_CAR | TIOCM_DSR; +} + +static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* todo - possibly remove AFC and do manual CTS */ +} + +static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int ucon; + + spin_lock_irqsave(&port->lock, flags); + + ucon = rd_regl(port, S3C2410_UCON); + + if (break_state) + ucon |= S3C2410_UCON_SBREAK; + else + ucon &= ~S3C2410_UCON_SBREAK; + + wr_regl(port, S3C2410_UCON, ucon); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void s3c24xx_serial_shutdown(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (ourport->tx_claimed) { + free_irq(TX_IRQ(port), ourport); + tx_enabled(port) = 0; + ourport->tx_claimed = 0; + } + + if (ourport->rx_claimed) { + free_irq(RX_IRQ(port), ourport); + ourport->rx_claimed = 0; + rx_enabled(port) = 0; + } +} + + +static int s3c24xx_serial_startup(struct uart_port *port) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + unsigned long flags; + int ret; + + dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n", + port->mapbase, port->membase); + + local_irq_save(flags); + + rx_enabled(port) = 1; + + ret = request_irq(RX_IRQ(port), + s3c24xx_serial_rx_chars, 0, + s3c24xx_serial_portname(port), ourport); + + if (ret != 0) { + printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port)); + return ret; + } + + ourport->rx_claimed = 1; + + dbg("requesting tx irq...\n"); + + tx_enabled(port) = 1; + + ret = request_irq(TX_IRQ(port), + s3c24xx_serial_tx_chars, 0, + s3c24xx_serial_portname(port), ourport); + + if (ret) { + printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port)); + goto err; + } + + ourport->tx_claimed = 1; + + dbg("s3c24xx_serial_startup ok\n"); + + /* the port reset code should have done the correct + * register setup for the port controls */ + + local_irq_restore(flags); + return ret; + + err: + s3c24xx_serial_shutdown(port); + local_irq_restore(flags); + return ret; +} + +/* power power management control */ + +static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, + unsigned int old) +{ + struct s3c24xx_uart_port *ourport = to_ourport(port); + + switch (level) { + case 3: + if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) + clk_disable(ourport->baudclk); + + clk_disable(ourport->clk); + break; + + case 0: + clk_enable(ourport->clk); + + if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) + clk_enable(ourport->baudclk); + + break; + default: + printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level); + } +} + +/* baud rate calculation + * + * The UARTs on the S3C2410/S3C2440 can take their clocks from a number + * of different sources, including the peripheral clock ("pclk") and an + * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk") + * with a programmable extra divisor. + * + * The following code goes through the clock sources, and calculates the + * baud clocks (and the resultant actual baud rates) and then tries to + * pick the closest one and select that. + * +*/ + + +#define MAX_CLKS (8) + +static struct s3c24xx_uart_clksrc tmp_clksrc = { + .name = "pclk", + .min_baud = 0, + .max_baud = 0, + .divisor = 1, +}; + +static inline int +s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + return (info->get_clksrc)(port, c); +} + +static inline int +s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + return (info->set_clksrc)(port, c); +} + +struct baud_calc { + struct s3c24xx_uart_clksrc *clksrc; + unsigned int calc; + unsigned int quot; + struct clk *src; +}; + +static int s3c24xx_serial_calcbaud(struct baud_calc *calc, + struct uart_port *port, + struct s3c24xx_uart_clksrc *clksrc, + unsigned int baud) +{ + unsigned long rate; + + calc->src = clk_get(port->dev, clksrc->name); + if (calc->src == NULL || IS_ERR(calc->src)) + return 0; + + rate = clk_get_rate(calc->src); + rate /= clksrc->divisor; + + calc->clksrc = clksrc; + calc->quot = (rate + (8 * baud)) / (16 * baud); + calc->calc = (rate / (calc->quot * 16)); + + calc->quot--; + return 1; +} + +static unsigned int s3c24xx_serial_getclk(struct uart_port *port, + struct s3c24xx_uart_clksrc **clksrc, + struct clk **clk, + unsigned int baud) +{ + struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); + struct s3c24xx_uart_clksrc *clkp; + struct baud_calc res[MAX_CLKS]; + struct baud_calc *resptr, *best, *sptr; + int i; + + clkp = cfg->clocks; + best = NULL; + + if (cfg->clocks_size < 2) { + if (cfg->clocks_size == 0) + clkp = &tmp_clksrc; + + /* check to see if we're sourcing fclk, and if so we're + * going to have to update the clock source + */ + + if (strcmp(clkp->name, "fclk") == 0) { + struct s3c24xx_uart_clksrc src; + + s3c24xx_serial_getsource(port, &src); + + /* check that the port already using fclk, and if + * not, then re-select fclk + */ + + if (strcmp(src.name, clkp->name) == 0) { + s3c24xx_serial_setsource(port, clkp); + s3c24xx_serial_getsource(port, &src); + } + + clkp->divisor = src.divisor; + } + + s3c24xx_serial_calcbaud(res, port, clkp, baud); + best = res; + resptr = best + 1; + } else { + resptr = res; + + for (i = 0; i < cfg->clocks_size; i++, clkp++) { + if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud)) + resptr++; + } + } + + /* ok, we now need to select the best clock we found */ + + if (!best) { + unsigned int deviation = (1<<30)|((1<<30)-1); + int calc_deviation; + + for (sptr = res; sptr < resptr; sptr++) { + printk(KERN_DEBUG + "found clk %p (%s) quot %d, calc %d\n", + sptr->clksrc, sptr->clksrc->name, + sptr->quot, sptr->calc); + + calc_deviation = baud - sptr->calc; + if (calc_deviation < 0) + calc_deviation = -calc_deviation; + + if (calc_deviation < deviation) { + best = sptr; + deviation = calc_deviation; + } + } + + printk(KERN_DEBUG "best %p (deviation %d)\n", best, deviation); + } + + printk(KERN_DEBUG "selected clock %p (%s) quot %d, calc %d\n", + best->clksrc, best->clksrc->name, best->quot, best->calc); + + /* store results to pass back */ + + *clksrc = best->clksrc; + *clk = best->src; + + return best->quot; +} + +static void s3c24xx_serial_set_termios(struct uart_port *port, + struct termios *termios, + struct termios *old) +{ + struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); + struct s3c24xx_uart_port *ourport = to_ourport(port); + struct s3c24xx_uart_clksrc *clksrc; + struct clk *clk; + unsigned long flags; + unsigned int baud, quot; + unsigned int ulcon; + unsigned int umcon; + + /* + * We don't support modem control lines. + */ + termios->c_cflag &= ~(HUPCL | CMSPAR); + termios->c_cflag |= CLOCAL; + + /* + * Ask the core to calculate the divisor for us. + */ + + baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); + + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) + quot = port->custom_divisor; + else + quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud); + + /* check to see if we need to change clock source */ + + if (ourport->clksrc != clksrc || ourport->baudclk != clk) { + s3c24xx_serial_setsource(port, clksrc); + + if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { + clk_disable(ourport->baudclk); + clk_unuse(ourport->baudclk); + ourport->baudclk = NULL; + } + + clk_use(clk); + clk_enable(clk); + + ourport->clksrc = clksrc; + ourport->baudclk = clk; + } + + switch (termios->c_cflag & CSIZE) { + case CS5: + dbg("config: 5bits/char\n"); + ulcon = S3C2410_LCON_CS5; + break; + case CS6: + dbg("config: 6bits/char\n"); + ulcon = S3C2410_LCON_CS6; + break; + case CS7: + dbg("config: 7bits/char\n"); + ulcon = S3C2410_LCON_CS7; + break; + case CS8: + default: + dbg("config: 8bits/char\n"); + ulcon = S3C2410_LCON_CS8; + break; + } + + /* preserve original lcon IR settings */ + ulcon |= (cfg->ulcon & S3C2410_LCON_IRM); + + if (termios->c_cflag & CSTOPB) + ulcon |= S3C2410_LCON_STOPB; + + umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0; + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & PARODD) + ulcon |= S3C2410_LCON_PODD; + else + ulcon |= S3C2410_LCON_PEVEN; + } else { + ulcon |= S3C2410_LCON_PNONE; + } + + spin_lock_irqsave(&port->lock, flags); + + dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot); + + wr_regl(port, S3C2410_ULCON, ulcon); + wr_regl(port, S3C2410_UBRDIV, quot); + wr_regl(port, S3C2410_UMCON, umcon); + + dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", + rd_regl(port, S3C2410_ULCON), + rd_regl(port, S3C2410_UCON), + rd_regl(port, S3C2410_UFCON)); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * Which character status flags are we interested in? + */ + port->read_status_mask = S3C2410_UERSTAT_OVERRUN; + if (termios->c_iflag & INPCK) + port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY; + + /* + * Which character status flags should we ignore? + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN; + if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR) + port->ignore_status_mask |= S3C2410_UERSTAT_FRAME; + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RXSTAT_DUMMY_READ; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *s3c24xx_serial_type(struct uart_port *port) +{ + switch (port->type) { + case PORT_S3C2410: + return "S3C2410"; + case PORT_S3C2440: + return "S3C2440"; + default: + return NULL; + } +} + +#define MAP_SIZE (0x100) + +static void s3c24xx_serial_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, MAP_SIZE); +} + +static int s3c24xx_serial_request_port(struct uart_port *port) +{ + char *name = s3c24xx_serial_portname(port); + return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY; +} + +static void s3c24xx_serial_config_port(struct uart_port *port, int flags) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + if (flags & UART_CONFIG_TYPE && + s3c24xx_serial_request_port(port) == 0) + port->type = info->type; +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int +s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + if (ser->type != PORT_UNKNOWN && ser->type != info->type) + return -EINVAL; + + return 0; +} + + +#ifdef CONFIG_SERIAL_S3C2410_CONSOLE + +static struct console s3c24xx_serial_console; + +#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console +#else +#define S3C24XX_SERIAL_CONSOLE NULL +#endif + +static struct uart_ops s3c24xx_serial_ops = { + .pm = s3c24xx_serial_pm, + .tx_empty = s3c24xx_serial_tx_empty, + .get_mctrl = s3c24xx_serial_get_mctrl, + .set_mctrl = s3c24xx_serial_set_mctrl, + .stop_tx = s3c24xx_serial_stop_tx, + .start_tx = s3c24xx_serial_start_tx, + .stop_rx = s3c24xx_serial_stop_rx, + .enable_ms = s3c24xx_serial_enable_ms, + .break_ctl = s3c24xx_serial_break_ctl, + .startup = s3c24xx_serial_startup, + .shutdown = s3c24xx_serial_shutdown, + .set_termios = s3c24xx_serial_set_termios, + .type = s3c24xx_serial_type, + .release_port = s3c24xx_serial_release_port, + .request_port = s3c24xx_serial_request_port, + .config_port = s3c24xx_serial_config_port, + .verify_port = s3c24xx_serial_verify_port, +}; + + +static struct uart_driver s3c24xx_uart_drv = { + .owner = THIS_MODULE, + .dev_name = "s3c2410_serial", + .nr = 3, + .cons = S3C24XX_SERIAL_CONSOLE, + .driver_name = S3C24XX_SERIAL_NAME, + .devfs_name = S3C24XX_SERIAL_DEVFS, + .major = S3C24XX_SERIAL_MAJOR, + .minor = S3C24XX_SERIAL_MINOR, +}; + +static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { + [0] = { + .port = { + .lock = SPIN_LOCK_UNLOCKED, + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX0, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + } + }, + [1] = { + .port = { + .lock = SPIN_LOCK_UNLOCKED, + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX1, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + } + }, +#if NR_PORTS > 2 + + [2] = { + .port = { + .lock = SPIN_LOCK_UNLOCKED, + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX2, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, + } + } +#endif +}; + +/* s3c24xx_serial_resetport + * + * wrapper to call the specific reset for this port (reset the fifos + * and the settings) +*/ + +static inline int s3c24xx_serial_resetport(struct uart_port * port, + struct s3c2410_uartcfg *cfg) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + + return (info->reset_port)(port, cfg); +} + +/* s3c24xx_serial_init_port + * + * initialise a single serial port from the platform device given + */ + +static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, + struct s3c24xx_uart_info *info, + struct platform_device *platdev) +{ + struct uart_port *port = &ourport->port; + struct s3c2410_uartcfg *cfg; + struct resource *res; + + dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev); + + if (platdev == NULL) + return -ENODEV; + + cfg = s3c24xx_dev_to_cfg(&platdev->dev); + + if (port->mapbase != 0) + return 0; + + if (cfg->hwport > 3) + return -EINVAL; + + /* setup info for port */ + port->dev = &platdev->dev; + ourport->info = info; + + /* copy the info in from provided structure */ + ourport->port.fifosize = info->fifosize; + + dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport); + + port->uartclk = 1; + + if (cfg->uart_flags & UPF_CONS_FLOW) { + dbg("s3c24xx_serial_init_port: enabling flow control\n"); + port->flags |= UPF_CONS_FLOW; + } + + /* sort our the physical and virtual addresses for each UART */ + + res = platform_get_resource(platdev, IORESOURCE_MEM, 0); + if (res == NULL) { + printk(KERN_ERR "failed to find memory resource for uart\n"); + return -EINVAL; + } + + dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); + + port->mapbase = res->start; + port->membase = S3C24XX_VA_UART + (res->start - S3C2410_PA_UART); + port->irq = platform_get_irq(platdev, 0); + + ourport->clk = clk_get(&platdev->dev, "uart"); + + if (ourport->clk != NULL && !IS_ERR(ourport->clk)) + clk_use(ourport->clk); + + dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n", + port->mapbase, port->membase, port->irq, port->uartclk); + + /* reset the fifos (and setup the uart) */ + s3c24xx_serial_resetport(port, cfg); + return 0; +} + +/* Device driver serial port probe */ + +static int probe_index = 0; + +int s3c24xx_serial_probe(struct device *_dev, + struct s3c24xx_uart_info *info) +{ + struct s3c24xx_uart_port *ourport; + struct platform_device *dev = to_platform_device(_dev); + int ret; + + dbg("s3c24xx_serial_probe(%p, %p) %d\n", _dev, info, probe_index); + + ourport = &s3c24xx_serial_ports[probe_index]; + probe_index++; + + dbg("%s: initialising port %p...\n", __FUNCTION__, ourport); + + ret = s3c24xx_serial_init_port(ourport, info, dev); + if (ret < 0) + goto probe_err; + + dbg("%s: adding port\n", __FUNCTION__); + uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); + dev_set_drvdata(_dev, &ourport->port); + + return 0; + + probe_err: + return ret; +} + +int s3c24xx_serial_remove(struct device *_dev) +{ + struct uart_port *port = s3c24xx_dev_to_port(_dev); + + if (port) + uart_remove_one_port(&s3c24xx_uart_drv, port); + + return 0; +} + +/* UART power management code */ + +#ifdef CONFIG_PM + +int s3c24xx_serial_suspend(struct device *dev, u32 state, u32 level) +{ + struct uart_port *port = s3c24xx_dev_to_port(dev); + + if (port && level == SUSPEND_DISABLE) + uart_suspend_port(&s3c24xx_uart_drv, port); + + return 0; +} + +int s3c24xx_serial_resume(struct device *dev, u32 level) +{ + struct uart_port *port = s3c24xx_dev_to_port(dev); + struct s3c24xx_uart_port *ourport = to_ourport(port); + + if (port && level == RESUME_ENABLE) { + clk_enable(ourport->clk); + s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port)); + clk_disable(ourport->clk); + + uart_resume_port(&s3c24xx_uart_drv, port); + } + + return 0; +} + +#else +#define s3c24xx_serial_suspend NULL +#define s3c24xx_serial_resume NULL +#endif + +int s3c24xx_serial_init(struct device_driver *drv, + struct s3c24xx_uart_info *info) +{ + dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); + return driver_register(drv); +} + + +/* now comes the code to initialise either the s3c2410 or s3c2440 serial + * port information +*/ + +/* cpu specific variations on the serial port support */ + +#ifdef CONFIG_CPU_S3C2400 + +static int s3c2400_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + clk->divisor = 1; + clk->name = "pclk"; + + return 0; +} + +static int s3c2400_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + return 0; +} + +static int s3c2400_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2400_uart_inf = { + .name = "Samsung S3C2400 UART", + .type = PORT_S3C2400, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .get_clksrc = s3c2400_serial_getsource, + .set_clksrc = s3c2400_serial_setsource, + .reset_port = s3c2400_serial_resetport, +}; + +static int s3c2400_serial_probe(struct device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c2400_uart_inf); +} + +static struct device_driver s3c2400_serial_drv = { + .name = "s3c2400-uart", + .bus = &platform_bus_type, + .probe = s3c2400_serial_probe, + .remove = s3c24xx_serial_remove, + .suspend = s3c24xx_serial_suspend, + .resume = s3c24xx_serial_resume, +}; + +static inline int s3c2400_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf); +} + +static inline void s3c2400_serial_exit(void) +{ + driver_unregister(&s3c2400_serial_drv); +} + +#define s3c2400_uart_inf_at &s3c2400_uart_inf +#else + +static inline int s3c2400_serial_init(void) +{ + return 0; +} + +static inline void s3c2400_serial_exit(void) +{ +} + +#define s3c2400_uart_inf_at NULL + +#endif /* CONFIG_CPU_S3C2400 */ + +/* S3C2410 support */ + +#ifdef CONFIG_CPU_S3C2410 + +static int s3c2410_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2410_UCON_UCLK; + else + ucon &= ~S3C2410_UCON_UCLK; + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + +static int s3c2410_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; + + return 0; +} + +static int s3c2410_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2410_uart_inf = { + .name = "Samsung S3C2410 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .get_clksrc = s3c2410_serial_getsource, + .set_clksrc = s3c2410_serial_setsource, + .reset_port = s3c2410_serial_resetport, +}; + +/* device management */ + +static int s3c2410_serial_probe(struct device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c2410_uart_inf); +} + +static struct device_driver s3c2410_serial_drv = { + .name = "s3c2410-uart", + .bus = &platform_bus_type, + .probe = s3c2410_serial_probe, + .remove = s3c24xx_serial_remove, + .suspend = s3c24xx_serial_suspend, + .resume = s3c24xx_serial_resume, +}; + +static inline int s3c2410_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf); +} + +static inline void s3c2410_serial_exit(void) +{ + driver_unregister(&s3c2410_serial_drv); +} + +#define s3c2410_uart_inf_at &s3c2410_uart_inf +#else + +static inline int s3c2410_serial_init(void) +{ + return 0; +} + +static inline void s3c2410_serial_exit(void) +{ +} + +#define s3c2410_uart_inf_at NULL + +#endif /* CONFIG_CPU_S3C2410 */ + +#ifdef CONFIG_CPU_S3C2440 + +static int s3c2440_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + // todo - proper fclk<>nonfclk switch // + + ucon &= ~S3C2440_UCON_CLKMASK; + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2440_UCON_UCLK; + else if (strcmp(clk->name, "pclk") == 0) + ucon |= S3C2440_UCON_PCLK; + else if (strcmp(clk->name, "fclk") == 0) + ucon |= S3C2440_UCON_FCLK; + else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c2440_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + unsigned long ucon0, ucon1, ucon2; + + switch (ucon & S3C2440_UCON_CLKMASK) { + case S3C2440_UCON_UCLK: + clk->divisor = 1; + clk->name = "uclk"; + break; + + case S3C2440_UCON_PCLK: + case S3C2440_UCON_PCLK2: + clk->divisor = 1; + clk->name = "pclk"; + break; + + case S3C2440_UCON_FCLK: + /* the fun of calculating the uart divisors on + * the s3c2440 */ + + ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); + ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); + ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); + + printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2); + + ucon0 &= S3C2440_UCON0_DIVMASK; + ucon1 &= S3C2440_UCON1_DIVMASK; + ucon2 &= S3C2440_UCON2_DIVMASK; + + if (ucon0 != 0) { + clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT; + clk->divisor += 6; + } else if (ucon1 != 0) { + clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT; + clk->divisor += 21; + } else if (ucon2 != 0) { + clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT; + clk->divisor += 36; + } else { + /* manual calims 44, seems to be 9 */ + clk->divisor = 9; + } + + clk->name = "fclk"; + break; + } + + return 0; +} + +static int s3c2440_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= (S3C2440_UCON0_DIVMASK | (3<<10)); + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c2440_uart_inf = { + .name = "Samsung S3C2440 UART", + .type = PORT_S3C2440, + .fifosize = 64, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c2440_serial_getsource, + .set_clksrc = s3c2440_serial_setsource, + .reset_port = s3c2440_serial_resetport, +}; + +/* device management */ + +static int s3c2440_serial_probe(struct device *dev) +{ + dbg("s3c2440_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); +} + +static struct device_driver s3c2440_serial_drv = { + .name = "s3c2440-uart", + .bus = &platform_bus_type, + .probe = s3c2440_serial_probe, + .remove = s3c24xx_serial_remove, + .suspend = s3c24xx_serial_suspend, + .resume = s3c24xx_serial_resume, +}; + + +static inline int s3c2440_serial_init(void) +{ + return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf); +} + +static inline void s3c2440_serial_exit(void) +{ + driver_unregister(&s3c2440_serial_drv); +} + +#define s3c2440_uart_inf_at &s3c2440_uart_inf +#else + +static inline int s3c2440_serial_init(void) +{ + return 0; +} + +static inline void s3c2440_serial_exit(void) +{ +} + +#define s3c2440_uart_inf_at NULL +#endif /* CONFIG_CPU_S3C2440 */ + +/* module initialisation code */ + +static int __init s3c24xx_serial_modinit(void) +{ + int ret; + + ret = uart_register_driver(&s3c24xx_uart_drv); + if (ret < 0) { + printk(KERN_ERR "failed to register UART driver\n"); + return -1; + } + + s3c2400_serial_init(); + s3c2410_serial_init(); + s3c2440_serial_init(); + + return 0; +} + +static void __exit s3c24xx_serial_modexit(void) +{ + s3c2400_serial_exit(); + s3c2410_serial_exit(); + s3c2440_serial_exit(); + + uart_unregister_driver(&s3c24xx_uart_drv); +} + + +module_init(s3c24xx_serial_modinit); +module_exit(s3c24xx_serial_modexit); + +/* Console code */ + +#ifdef CONFIG_SERIAL_S3C2410_CONSOLE + +static struct uart_port *cons_uart; + +static int +s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) +{ + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ufstat, utrstat; + + if (ufcon & S3C2410_UFCON_FIFOMODE) { + /* fifo mode - check ammount of data in fifo registers... */ + + ufstat = rd_regl(port, S3C2410_UFSTAT); + return (ufstat & info->tx_fifofull) ? 0 : 1; + } + + /* in non-fifo mode, we go and use the tx buffer empty */ + + utrstat = rd_regl(port, S3C2410_UTRSTAT); + return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0; +} + +static void +s3c24xx_serial_console_write(struct console *co, const char *s, + unsigned int count) +{ + int i; + unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); + + for (i = 0; i < count; i++) { + while (!s3c24xx_serial_console_txrdy(cons_uart, ufcon)) + barrier(); + + wr_regb(cons_uart, S3C2410_UTXH, s[i]); + + if (s[i] == '\n') { + while (!s3c24xx_serial_console_txrdy(cons_uart, ufcon)) + barrier(); + + wr_regb(cons_uart, S3C2410_UTXH, '\r'); + } + } +} + +static void __init +s3c24xx_serial_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + struct s3c24xx_uart_clksrc clksrc; + struct clk *clk; + unsigned int ulcon; + unsigned int ucon; + unsigned int ubrdiv; + unsigned long rate; + + ulcon = rd_regl(port, S3C2410_ULCON); + ucon = rd_regl(port, S3C2410_UCON); + ubrdiv = rd_regl(port, S3C2410_UBRDIV); + + dbg("s3c24xx_serial_get_options: port=%p\n" + "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n", + port, ulcon, ucon, ubrdiv); + + if ((ucon & 0xf) != 0) { + /* consider the serial port configured if the tx/rx mode set */ + + switch (ulcon & S3C2410_LCON_CSMASK) { + case S3C2410_LCON_CS5: + *bits = 5; + break; + case S3C2410_LCON_CS6: + *bits = 6; + break; + case S3C2410_LCON_CS7: + *bits = 7; + break; + default: + case S3C2410_LCON_CS8: + *bits = 8; + break; + } + + switch (ulcon & S3C2410_LCON_PMASK) { + case S3C2410_LCON_PEVEN: + *parity = 'e'; + break; + + case S3C2410_LCON_PODD: + *parity = 'o'; + break; + + case S3C2410_LCON_PNONE: + default: + *parity = 'n'; + } + + /* now calculate the baud rate */ + + s3c24xx_serial_getsource(port, &clksrc); + + clk = clk_get(port->dev, clksrc.name); + if (!IS_ERR(clk) && clk != NULL) + rate = clk_get_rate(clk) / clksrc.divisor; + else + rate = 1; + + + *baud = rate / ( 16 * (ubrdiv + 1)); + dbg("calculated baud %d\n", *baud); + } + +} + +/* s3c24xx_serial_init_ports + * + * initialise the serial ports from the machine provided initialisation + * data. +*/ + +static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info) +{ + struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; + struct platform_device **platdev_ptr; + int i; + + dbg("s3c24xx_serial_init_ports: initialising ports...\n"); + + platdev_ptr = s3c24xx_uart_devs; + + for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) { + s3c24xx_serial_init_port(ptr, info, *platdev_ptr); + } + + return 0; +} + +static int __init +s3c24xx_serial_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n", + co, co->index, options); + + /* is this a valid port */ + + if (co->index == -1 || co->index >= NR_PORTS) + co->index = 0; + + port = &s3c24xx_serial_ports[co->index].port; + + /* is the port configured? */ + + if (port->mapbase == 0x0) { + co->index = 0; + port = &s3c24xx_serial_ports[co->index].port; + } + + cons_uart = port; + + dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index); + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + s3c24xx_serial_get_options(port, &baud, &parity, &bits); + + dbg("s3c24xx_serial_console_setup: baud %d\n", baud); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +/* s3c24xx_serial_initconsole + * + * initialise the console from one of the uart drivers +*/ + +static struct console s3c24xx_serial_console = +{ + .name = S3C24XX_SERIAL_NAME, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .write = s3c24xx_serial_console_write, + .setup = s3c24xx_serial_console_setup +}; + +static int s3c24xx_serial_initconsole(void) +{ + struct s3c24xx_uart_info *info; + struct platform_device *dev = s3c24xx_uart_devs[0]; + + dbg("s3c24xx_serial_initconsole\n"); + + /* select driver based on the cpu */ + + if (dev == NULL) { + printk(KERN_ERR "s3c24xx: no devices for console init\n"); + return 0; + } + + if (strcmp(dev->name, "s3c2400-uart") == 0) { + info = s3c2400_uart_inf_at; + } else if (strcmp(dev->name, "s3c2410-uart") == 0) { + info = s3c2410_uart_inf_at; + } else if (strcmp(dev->name, "s3c2440-uart") == 0) { + info = s3c2440_uart_inf_at; + } else { + printk(KERN_ERR "s3c24xx: no driver for %s\n", dev->name); + return 0; + } + + if (info == NULL) { + printk(KERN_ERR "s3c24xx: no driver for console\n"); + return 0; + } + + s3c24xx_serial_console.data = &s3c24xx_uart_drv; + s3c24xx_serial_init_ports(info); + + register_console(&s3c24xx_serial_console); + return 0; +} + +console_initcall(s3c24xx_serial_initconsole); + +#endif /* CONFIG_SERIAL_S3C2410_CONSOLE */ + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_DESCRIPTION("Samsung S3C2410/S3C2440 Serial port driver"); diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c new file mode 100644 index 000000000000..85f0af452f95 --- /dev/null +++ b/drivers/serial/sa1100.c @@ -0,0 +1,952 @@ +/* + * linux/drivers/char/sa1100.c + * + * Driver for SA11x0 serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * $Id: sa1100.c,v 1.50 2002/07/29 14:41:04 rmk Exp $ + * + */ +#include + +#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/* We've been assigned a range on the "Low-density serial ports" major */ +#define SERIAL_SA1100_MAJOR 204 +#define MINOR_START 5 + +#define NR_PORTS 3 + +#define SA1100_ISR_PASS_LIMIT 256 + +/* + * Convert from ignore_status_mask or read_status_mask to UTSR[01] + */ +#define SM_TO_UTSR0(x) ((x) & 0xff) +#define SM_TO_UTSR1(x) ((x) >> 8) +#define UTSR0_TO_SM(x) ((x)) +#define UTSR1_TO_SM(x) ((x) << 8) + +#define UART_GET_UTCR0(sport) __raw_readl((sport)->port.membase + UTCR0) +#define UART_GET_UTCR1(sport) __raw_readl((sport)->port.membase + UTCR1) +#define UART_GET_UTCR2(sport) __raw_readl((sport)->port.membase + UTCR2) +#define UART_GET_UTCR3(sport) __raw_readl((sport)->port.membase + UTCR3) +#define UART_GET_UTSR0(sport) __raw_readl((sport)->port.membase + UTSR0) +#define UART_GET_UTSR1(sport) __raw_readl((sport)->port.membase + UTSR1) +#define UART_GET_CHAR(sport) __raw_readl((sport)->port.membase + UTDR) + +#define UART_PUT_UTCR0(sport,v) __raw_writel((v),(sport)->port.membase + UTCR0) +#define UART_PUT_UTCR1(sport,v) __raw_writel((v),(sport)->port.membase + UTCR1) +#define UART_PUT_UTCR2(sport,v) __raw_writel((v),(sport)->port.membase + UTCR2) +#define UART_PUT_UTCR3(sport,v) __raw_writel((v),(sport)->port.membase + UTCR3) +#define UART_PUT_UTSR0(sport,v) __raw_writel((v),(sport)->port.membase + UTSR0) +#define UART_PUT_UTSR1(sport,v) __raw_writel((v),(sport)->port.membase + UTSR1) +#define UART_PUT_CHAR(sport,v) __raw_writel((v),(sport)->port.membase + UTDR) + +/* + * This is the size of our serial port register set. + */ +#define UART_PORT_SIZE 0x24 + +/* + * This determines how often we check the modem status signals + * for any change. They generally aren't connected to an IRQ + * so we have to poll them. We also check immediately before + * filling the TX fifo incase CTS has been dropped. + */ +#define MCTRL_TIMEOUT (250*HZ/1000) + +struct sa1100_port { + struct uart_port port; + struct timer_list timer; + unsigned int old_status; +}; + +/* + * Handle any change of modem status signal since we were last called. + */ +static void sa1100_mctrl_check(struct sa1100_port *sport) +{ + unsigned int status, changed; + + status = sport->port.ops->get_mctrl(&sport->port); + changed = status ^ sport->old_status; + + if (changed == 0) + return; + + sport->old_status = status; + + if (changed & TIOCM_RI) + sport->port.icount.rng++; + if (changed & TIOCM_DSR) + sport->port.icount.dsr++; + if (changed & TIOCM_CAR) + uart_handle_dcd_change(&sport->port, status & TIOCM_CAR); + if (changed & TIOCM_CTS) + uart_handle_cts_change(&sport->port, status & TIOCM_CTS); + + wake_up_interruptible(&sport->port.info->delta_msr_wait); +} + +/* + * This is our per-port timeout handler, for checking the + * modem status signals. + */ +static void sa1100_timeout(unsigned long data) +{ + struct sa1100_port *sport = (struct sa1100_port *)data; + unsigned long flags; + + if (sport->port.info) { + spin_lock_irqsave(&sport->port.lock, flags); + sa1100_mctrl_check(sport); + spin_unlock_irqrestore(&sport->port.lock, flags); + + mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT); + } +} + +/* + * interrupts disabled on entry + */ +static void sa1100_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_TIE); + sport->port.read_status_mask &= ~UTSR0_TO_SM(UTSR0_TFS); +} + +/* + * interrupts may not be disabled on entry + */ +static void sa1100_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + unsigned long flags; + u32 utcr3; + + spin_lock_irqsave(&sport->port.lock, flags); + utcr3 = UART_GET_UTCR3(sport); + sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS); + UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +/* + * Interrupts enabled + */ +static void sa1100_stop_rx(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + u32 utcr3; + + utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_RIE); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void sa1100_enable_ms(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + mod_timer(&sport->timer, jiffies); +} + +static void +sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs) +{ + struct tty_struct *tty = sport->port.info->tty; + unsigned int status, ch, flg, ignored = 0; + + status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | + UTSR0_TO_SM(UART_GET_UTSR0(sport)); + while (status & UTSR1_TO_SM(UTSR1_RNE)) { + ch = UART_GET_CHAR(sport); + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + goto ignore_char; + sport->port.icount.rx++; + + flg = TTY_NORMAL; + + /* + * note that the error handling code is + * out of the main execution path + */ + if (status & UTSR1_TO_SM(UTSR1_PRE | UTSR1_FRE | UTSR1_ROR)) + goto handle_error; + + if (uart_handle_sysrq_char(&sport->port, ch, regs)) + goto ignore_char; + + error_return: + tty_insert_flip_char(tty, ch, flg); + ignore_char: + status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | + UTSR0_TO_SM(UART_GET_UTSR0(sport)); + } + out: + tty_flip_buffer_push(tty); + return; + + handle_error: + if (status & UTSR1_TO_SM(UTSR1_PRE)) + sport->port.icount.parity++; + else if (status & UTSR1_TO_SM(UTSR1_FRE)) + sport->port.icount.frame++; + if (status & UTSR1_TO_SM(UTSR1_ROR)) + sport->port.icount.overrun++; + + if (status & sport->port.ignore_status_mask) { + if (++ignored > 100) + goto out; + goto ignore_char; + } + + status &= sport->port.read_status_mask; + + if (status & UTSR1_TO_SM(UTSR1_PRE)) + flg = TTY_PARITY; + else if (status & UTSR1_TO_SM(UTSR1_FRE)) + flg = TTY_FRAME; + + if (status & UTSR1_TO_SM(UTSR1_ROR)) { + /* + * overrun does *not* affect the character + * we read from the FIFO + */ + tty_insert_flip_char(tty, ch, flg); + ch = 0; + flg = TTY_OVERRUN; + } +#ifdef SUPPORT_SYSRQ + sport->port.sysrq = 0; +#endif + goto error_return; +} + +static void sa1100_tx_chars(struct sa1100_port *sport) +{ + struct circ_buf *xmit = &sport->port.info->xmit; + + if (sport->port.x_char) { + UART_PUT_CHAR(sport, sport->port.x_char); + sport->port.icount.tx++; + sport->port.x_char = 0; + return; + } + + /* + * Check the modem control lines before + * transmitting anything. + */ + sa1100_mctrl_check(sport); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + sa1100_stop_tx(&sport->port, 0); + return; + } + + /* + * Tried using FIFO (not checking TNF) for fifo fill: + * still had the '4 bytes repeated' problem. + */ + while (UART_GET_UTSR1(sport) & UTSR1_TNF) { + UART_PUT_CHAR(sport, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + sport->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&sport->port); + + if (uart_circ_empty(xmit)) + sa1100_stop_tx(&sport->port, 0); +} + +static irqreturn_t sa1100_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct sa1100_port *sport = dev_id; + unsigned int status, pass_counter = 0; + + spin_lock(&sport->port.lock); + status = UART_GET_UTSR0(sport); + status &= SM_TO_UTSR0(sport->port.read_status_mask) | ~UTSR0_TFS; + do { + if (status & (UTSR0_RFS | UTSR0_RID)) { + /* Clear the receiver idle bit, if set */ + if (status & UTSR0_RID) + UART_PUT_UTSR0(sport, UTSR0_RID); + sa1100_rx_chars(sport, regs); + } + + /* Clear the relevant break bits */ + if (status & (UTSR0_RBB | UTSR0_REB)) + UART_PUT_UTSR0(sport, status & (UTSR0_RBB | UTSR0_REB)); + + if (status & UTSR0_RBB) + sport->port.icount.brk++; + + if (status & UTSR0_REB) + uart_handle_break(&sport->port); + + if (status & UTSR0_TFS) + sa1100_tx_chars(sport); + if (pass_counter++ > SA1100_ISR_PASS_LIMIT) + break; + status = UART_GET_UTSR0(sport); + status &= SM_TO_UTSR0(sport->port.read_status_mask) | + ~UTSR0_TFS; + } while (status & (UTSR0_TFS | UTSR0_RFS | UTSR0_RID)); + spin_unlock(&sport->port.lock); + + return IRQ_HANDLED; +} + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int sa1100_tx_empty(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + return UART_GET_UTSR1(sport) & UTSR1_TBY ? 0 : TIOCSER_TEMT; +} + +static unsigned int sa1100_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/* + * Interrupts always disabled. + */ +static void sa1100_break_ctl(struct uart_port *port, int break_state) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + unsigned long flags; + unsigned int utcr3; + + spin_lock_irqsave(&sport->port.lock, flags); + utcr3 = UART_GET_UTCR3(sport); + if (break_state == -1) + utcr3 |= UTCR3_BRK; + else + utcr3 &= ~UTCR3_BRK; + UART_PUT_UTCR3(sport, utcr3); + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static int sa1100_startup(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + int retval; + + /* + * Allocate the IRQ + */ + retval = request_irq(sport->port.irq, sa1100_int, 0, + "sa11x0-uart", sport); + if (retval) + return retval; + + /* + * Finally, clear and enable interrupts + */ + UART_PUT_UTSR0(sport, -1); + UART_PUT_UTCR3(sport, UTCR3_RXE | UTCR3_TXE | UTCR3_RIE); + + /* + * Enable modem status interrupts + */ + spin_lock_irq(&sport->port.lock); + sa1100_enable_ms(&sport->port); + spin_unlock_irq(&sport->port.lock); + + return 0; +} + +static void sa1100_shutdown(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + /* + * Stop our timer. + */ + del_timer_sync(&sport->timer); + + /* + * Free the interrupt + */ + free_irq(sport->port.irq, sport); + + /* + * Disable all interrupts, port and break condition. + */ + UART_PUT_UTCR3(sport, 0); +} + +static void +sa1100_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + unsigned long flags; + unsigned int utcr0, old_utcr3, baud, quot; + unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8; + + /* + * We only support CS7 and CS8. + */ + while ((termios->c_cflag & CSIZE) != CS7 && + (termios->c_cflag & CSIZE) != CS8) { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= old_csize; + old_csize = CS8; + } + + if ((termios->c_cflag & CSIZE) == CS8) + utcr0 = UTCR0_DSS; + else + utcr0 = 0; + + if (termios->c_cflag & CSTOPB) + utcr0 |= UTCR0_SBS; + if (termios->c_cflag & PARENB) { + utcr0 |= UTCR0_PE; + if (!(termios->c_cflag & PARODD)) + utcr0 |= UTCR0_OES; + } + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + spin_lock_irqsave(&sport->port.lock, flags); + + sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS); + sport->port.read_status_mask |= UTSR1_TO_SM(UTSR1_ROR); + if (termios->c_iflag & INPCK) + sport->port.read_status_mask |= + UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); + if (termios->c_iflag & (BRKINT | PARMRK)) + sport->port.read_status_mask |= + UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); + + /* + * Characters to ignore + */ + sport->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE); + if (termios->c_iflag & IGNBRK) { + sport->port.ignore_status_mask |= + UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + sport->port.ignore_status_mask |= + UTSR1_TO_SM(UTSR1_ROR); + } + + del_timer_sync(&sport->timer); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + /* + * disable interrupts and drain transmitter + */ + old_utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)); + + while (UART_GET_UTSR1(sport) & UTSR1_TBY) + barrier(); + + /* then, disable everything */ + UART_PUT_UTCR3(sport, 0); + + /* set the parity, stop bits and data size */ + UART_PUT_UTCR0(sport, utcr0); + + /* set the baud rate */ + quot -= 1; + UART_PUT_UTCR1(sport, ((quot & 0xf00) >> 8)); + UART_PUT_UTCR2(sport, (quot & 0xff)); + + UART_PUT_UTSR0(sport, -1); + + UART_PUT_UTCR3(sport, old_utcr3); + + if (UART_ENABLE_MS(&sport->port, termios->c_cflag)) + sa1100_enable_ms(&sport->port); + + spin_unlock_irqrestore(&sport->port.lock, flags); +} + +static const char *sa1100_type(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + return sport->port.type == PORT_SA1100 ? "SA1100" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void sa1100_release_port(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + release_mem_region(sport->port.mapbase, UART_PORT_SIZE); +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int sa1100_request_port(struct uart_port *port) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + return request_mem_region(sport->port.mapbase, UART_PORT_SIZE, + "sa11x0-uart") != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void sa1100_config_port(struct uart_port *port, int flags) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + + if (flags & UART_CONFIG_TYPE && + sa1100_request_port(&sport->port) == 0) + sport->port.type = PORT_SA1100; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_SA1100 and PORT_UNKNOWN + */ +static int +sa1100_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct sa1100_port *sport = (struct sa1100_port *)port; + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_SA1100) + ret = -EINVAL; + if (sport->port.irq != ser->irq) + ret = -EINVAL; + if (ser->io_type != SERIAL_IO_MEM) + ret = -EINVAL; + if (sport->port.uartclk / 16 != ser->baud_base) + ret = -EINVAL; + if ((void *)sport->port.mapbase != ser->iomem_base) + ret = -EINVAL; + if (sport->port.iobase != ser->port) + ret = -EINVAL; + if (ser->hub6 != 0) + ret = -EINVAL; + return ret; +} + +static struct uart_ops sa1100_pops = { + .tx_empty = sa1100_tx_empty, + .set_mctrl = sa1100_set_mctrl, + .get_mctrl = sa1100_get_mctrl, + .stop_tx = sa1100_stop_tx, + .start_tx = sa1100_start_tx, + .stop_rx = sa1100_stop_rx, + .enable_ms = sa1100_enable_ms, + .break_ctl = sa1100_break_ctl, + .startup = sa1100_startup, + .shutdown = sa1100_shutdown, + .set_termios = sa1100_set_termios, + .type = sa1100_type, + .release_port = sa1100_release_port, + .request_port = sa1100_request_port, + .config_port = sa1100_config_port, + .verify_port = sa1100_verify_port, +}; + +static struct sa1100_port sa1100_ports[NR_PORTS]; + +/* + * Setup the SA1100 serial ports. Note that we don't include the IrDA + * port here since we have our own SIR/FIR driver (see drivers/net/irda) + * + * Note also that we support "console=ttySAx" where "x" is either 0 or 1. + * Which serial port this ends up being depends on the machine you're + * running this kernel on. I'm not convinced that this is a good idea, + * but that's the way it traditionally works. + * + * Note that NanoEngine UART3 becomes UART2, and UART2 is no longer + * used here. + */ +static void __init sa1100_init_ports(void) +{ + static int first = 1; + int i; + + if (!first) + return; + first = 0; + + for (i = 0; i < NR_PORTS; i++) { + sa1100_ports[i].port.uartclk = 3686400; + sa1100_ports[i].port.ops = &sa1100_pops; + sa1100_ports[i].port.fifosize = 8; + sa1100_ports[i].port.line = i; + sa1100_ports[i].port.iotype = SERIAL_IO_MEM; + init_timer(&sa1100_ports[i].timer); + sa1100_ports[i].timer.function = sa1100_timeout; + sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i]; + } + + /* + * make transmit lines outputs, so that when the port + * is closed, the output is in the MARK state. + */ + PPDR |= PPC_TXD1 | PPC_TXD3; + PPSR |= PPC_TXD1 | PPC_TXD3; +} + +void __init sa1100_register_uart_fns(struct sa1100_port_fns *fns) +{ + if (fns->get_mctrl) + sa1100_pops.get_mctrl = fns->get_mctrl; + if (fns->set_mctrl) + sa1100_pops.set_mctrl = fns->set_mctrl; + + sa1100_pops.pm = fns->pm; + sa1100_pops.set_wake = fns->set_wake; +} + +void __init sa1100_register_uart(int idx, int port) +{ + if (idx >= NR_PORTS) { + printk(KERN_ERR "%s: bad index number %d\n", __FUNCTION__, idx); + return; + } + + switch (port) { + case 1: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0; + sa1100_ports[idx].port.mapbase = _Ser1UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser1UART; + sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF; + break; + + case 2: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0; + sa1100_ports[idx].port.mapbase = _Ser2UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser2ICP; + sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF; + break; + + case 3: + sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0; + sa1100_ports[idx].port.mapbase = _Ser3UTCR0; + sa1100_ports[idx].port.irq = IRQ_Ser3UART; + sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF; + break; + + default: + printk(KERN_ERR "%s: bad port number %d\n", __FUNCTION__, port); + } +} + + +#ifdef CONFIG_SERIAL_SA1100_CONSOLE + +/* + * Interrupts are disabled on entering + */ +static void +sa1100_console_write(struct console *co, const char *s, unsigned int count) +{ + struct sa1100_port *sport = &sa1100_ports[co->index]; + unsigned int old_utcr3, status, i; + + /* + * First, save UTCR3 and then disable interrupts + */ + old_utcr3 = UART_GET_UTCR3(sport); + UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) | + UTCR3_TXE); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++) { + do { + status = UART_GET_UTSR1(sport); + } while (!(status & UTSR1_TNF)); + UART_PUT_CHAR(sport, s[i]); + if (s[i] == '\n') { + do { + status = UART_GET_UTSR1(sport); + } while (!(status & UTSR1_TNF)); + UART_PUT_CHAR(sport, '\r'); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore UTCR3 + */ + do { + status = UART_GET_UTSR1(sport); + } while (status & UTSR1_TBY); + UART_PUT_UTCR3(sport, old_utcr3); +} + +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +sa1100_console_get_options(struct sa1100_port *sport, int *baud, + int *parity, int *bits) +{ + unsigned int utcr3; + + utcr3 = UART_GET_UTCR3(sport) & (UTCR3_RXE | UTCR3_TXE); + if (utcr3 == (UTCR3_RXE | UTCR3_TXE)) { + /* ok, the port was enabled */ + unsigned int utcr0, quot; + + utcr0 = UART_GET_UTCR0(sport); + + *parity = 'n'; + if (utcr0 & UTCR0_PE) { + if (utcr0 & UTCR0_OES) + *parity = 'e'; + else + *parity = 'o'; + } + + if (utcr0 & UTCR0_DSS) + *bits = 8; + else + *bits = 7; + + quot = UART_GET_UTCR2(sport) | UART_GET_UTCR1(sport) << 8; + quot &= 0xfff; + *baud = sport->port.uartclk / (16 * (quot + 1)); + } +} + +static int __init +sa1100_console_setup(struct console *co, char *options) +{ + struct sa1100_port *sport; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index == -1 || co->index >= NR_PORTS) + co->index = 0; + sport = &sa1100_ports[co->index]; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + sa1100_console_get_options(sport, &baud, &parity, &bits); + + return uart_set_options(&sport->port, co, baud, parity, bits, flow); +} + +extern struct uart_driver sa1100_reg; +static struct console sa1100_console = { + .name = "ttySA", + .write = sa1100_console_write, + .device = uart_console_device, + .setup = sa1100_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sa1100_reg, +}; + +static int __init sa1100_rs_console_init(void) +{ + sa1100_init_ports(); + register_console(&sa1100_console); + return 0; +} +console_initcall(sa1100_rs_console_init); + +#define SA1100_CONSOLE &sa1100_console +#else +#define SA1100_CONSOLE NULL +#endif + +static struct uart_driver sa1100_reg = { + .owner = THIS_MODULE, + .driver_name = "ttySA", + .dev_name = "ttySA", + .devfs_name = "ttySA", + .major = SERIAL_SA1100_MAJOR, + .minor = MINOR_START, + .nr = NR_PORTS, + .cons = SA1100_CONSOLE, +}; + +static int sa1100_serial_suspend(struct device *_dev, u32 state, u32 level) +{ + struct sa1100_port *sport = dev_get_drvdata(_dev); + + if (sport && level == SUSPEND_DISABLE) + uart_suspend_port(&sa1100_reg, &sport->port); + + return 0; +} + +static int sa1100_serial_resume(struct device *_dev, u32 level) +{ + struct sa1100_port *sport = dev_get_drvdata(_dev); + + if (sport && level == RESUME_ENABLE) + uart_resume_port(&sa1100_reg, &sport->port); + + return 0; +} + +static int sa1100_serial_probe(struct device *_dev) +{ + struct platform_device *dev = to_platform_device(_dev); + struct resource *res = dev->resource; + int i; + + for (i = 0; i < dev->num_resources; i++, res++) + if (res->flags & IORESOURCE_MEM) + break; + + if (i < dev->num_resources) { + for (i = 0; i < NR_PORTS; i++) { + if (sa1100_ports[i].port.mapbase != res->start) + continue; + + sa1100_ports[i].port.dev = _dev; + uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port); + dev_set_drvdata(_dev, &sa1100_ports[i]); + break; + } + } + + return 0; +} + +static int sa1100_serial_remove(struct device *_dev) +{ + struct sa1100_port *sport = dev_get_drvdata(_dev); + + dev_set_drvdata(_dev, NULL); + + if (sport) + uart_remove_one_port(&sa1100_reg, &sport->port); + + return 0; +} + +static struct device_driver sa11x0_serial_driver = { + .name = "sa11x0-uart", + .bus = &platform_bus_type, + .probe = sa1100_serial_probe, + .remove = sa1100_serial_remove, + .suspend = sa1100_serial_suspend, + .resume = sa1100_serial_resume, +}; + +static int __init sa1100_serial_init(void) +{ + int ret; + + printk(KERN_INFO "Serial: SA11x0 driver $Revision: 1.50 $\n"); + + sa1100_init_ports(); + + ret = uart_register_driver(&sa1100_reg); + if (ret == 0) { + ret = driver_register(&sa11x0_serial_driver); + if (ret) + uart_unregister_driver(&sa1100_reg); + } + return ret; +} + +static void __exit sa1100_serial_exit(void) +{ + driver_unregister(&sa11x0_serial_driver); + uart_unregister_driver(&sa1100_reg); +} + +module_init(sa1100_serial_init); +module_exit(sa1100_serial_exit); + +MODULE_AUTHOR("Deep Blue Solutions Ltd"); +MODULE_DESCRIPTION("SA1100 generic serial port driver $Revision: 1.50 $"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR); diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c new file mode 100644 index 000000000000..36b1ae083fb7 --- /dev/null +++ b/drivers/serial/serial_core.c @@ -0,0 +1,2395 @@ +/* + * linux/drivers/char/core.c + * + * Driver core for serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * + * Copyright 1999 ARM Limited + * Copyright (C) 2000-2001 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for serial_state and serial_icounter_struct */ +#include + +#include +#include + +#undef DEBUG +#ifdef DEBUG +#define DPRINTK(x...) printk(x) +#else +#define DPRINTK(x...) do { } while (0) +#endif + +/* + * This is used to lock changes in serial line configuration. + */ +static DECLARE_MUTEX(port_sem); + +#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8) + +#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->blocked_open : 0)) + +#ifdef CONFIG_SERIAL_CORE_CONSOLE +#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line) +#else +#define uart_console(port) (0) +#endif + +static void uart_change_speed(struct uart_state *state, struct termios *old_termios); +static void uart_wait_until_sent(struct tty_struct *tty, int timeout); +static void uart_change_pm(struct uart_state *state, int pm_state); + +/* + * This routine is used by the interrupt handler to schedule processing in + * the software interrupt portion of the driver. + */ +void uart_write_wakeup(struct uart_port *port) +{ + struct uart_info *info = port->info; + tasklet_schedule(&info->tlet); +} + +static void uart_stop(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + port->ops->stop_tx(port, 1); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __uart_start(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + + if (!uart_circ_empty(&state->info->xmit) && state->info->xmit.buf && + !tty->stopped && !tty->hw_stopped) + port->ops->start_tx(port, 1); +} + +static void uart_start(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + __uart_start(tty); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void uart_tasklet_action(unsigned long data) +{ + struct uart_state *state = (struct uart_state *)data; + tty_wakeup(state->info->tty); +} + +static inline void +uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) +{ + unsigned long flags; + unsigned int old; + + spin_lock_irqsave(&port->lock, flags); + old = port->mctrl; + port->mctrl = (old & ~clear) | set; + if (old != port->mctrl) + port->ops->set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); +} + +#define uart_set_mctrl(port,set) uart_update_mctrl(port,set,0) +#define uart_clear_mctrl(port,clear) uart_update_mctrl(port,0,clear) + +/* + * Startup the port. This will be called once per open. All calls + * will be serialised by the per-port semaphore. + */ +static int uart_startup(struct uart_state *state, int init_hw) +{ + struct uart_info *info = state->info; + struct uart_port *port = state->port; + unsigned long page; + int retval = 0; + + if (info->flags & UIF_INITIALIZED) + return 0; + + /* + * Set the TTY IO error marker - we will only clear this + * once we have successfully opened the port. Also set + * up the tty->alt_speed kludge + */ + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + if (port->type == PORT_UNKNOWN) + return 0; + + /* + * Initialise and allocate the transmit and temporary + * buffer. + */ + if (!info->xmit.buf) { + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + info->xmit.buf = (unsigned char *) page; + uart_circ_clear(&info->xmit); + } + + retval = port->ops->startup(port); + if (retval == 0) { + if (init_hw) { + /* + * Initialise the hardware port settings. + */ + uart_change_speed(state, NULL); + + /* + * Setup the RTS and DTR signals once the + * port is open and ready to respond. + */ + if (info->tty->termios->c_cflag & CBAUD) + uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR); + } + + info->flags |= UIF_INITIALIZED; + + clear_bit(TTY_IO_ERROR, &info->tty->flags); + } + + if (retval && capable(CAP_SYS_ADMIN)) + retval = 0; + + return retval; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. Calls to + * uart_shutdown are serialised by the per-port semaphore. + */ +static void uart_shutdown(struct uart_state *state) +{ + struct uart_info *info = state->info; + struct uart_port *port = state->port; + + if (!(info->flags & UIF_INITIALIZED)) + return; + + /* + * Turn off DTR and RTS early. + */ + if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free + * the irq here so the queue might never be woken up. Note + * that we won't end up waiting on delta_msr_wait again since + * any outstanding file descriptors should be pointing at + * hung_up_tty_fops now. + */ + wake_up_interruptible(&info->delta_msr_wait); + + /* + * Free the IRQ and disable the port. + */ + port->ops->shutdown(port); + + /* + * Ensure that the IRQ handler isn't running on another CPU. + */ + synchronize_irq(port->irq); + + /* + * Free the transmit buffer page. + */ + if (info->xmit.buf) { + free_page((unsigned long)info->xmit.buf); + info->xmit.buf = NULL; + } + + /* + * kill off our tasklet + */ + tasklet_kill(&info->tlet); + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~UIF_INITIALIZED; +} + +/** + * uart_update_timeout - update per-port FIFO timeout. + * @port: uart_port structure describing the port + * @cflag: termios cflag value + * @baud: speed of the port + * + * Set the port FIFO timeout value. The @cflag value should + * reflect the actual hardware settings. + */ +void +uart_update_timeout(struct uart_port *port, unsigned int cflag, + unsigned int baud) +{ + unsigned int bits; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + bits = 7; + break; + case CS6: + bits = 8; + break; + case CS7: + bits = 9; + break; + default: + bits = 10; + break; // CS8 + } + + if (cflag & CSTOPB) + bits++; + if (cflag & PARENB) + bits++; + + /* + * The total number of bits to be transmitted in the fifo. + */ + bits = bits * port->fifosize; + + /* + * Figure the timeout to send the above number of bits. + * Add .02 seconds of slop + */ + port->timeout = (HZ * bits) / baud + HZ/50; +} + +EXPORT_SYMBOL(uart_update_timeout); + +/** + * uart_get_baud_rate - return baud rate for a particular port + * @port: uart_port structure describing the port in question. + * @termios: desired termios settings. + * @old: old termios (or NULL) + * @min: minimum acceptable baud rate + * @max: maximum acceptable baud rate + * + * Decode the termios structure into a numeric baud rate, + * taking account of the magic 38400 baud rate (with spd_* + * flags), and mapping the %B0 rate to 9600 baud. + * + * If the new baud rate is invalid, try the old termios setting. + * If it's still invalid, we try 9600 baud. + * + * Update the @termios structure to reflect the baud rate + * we're actually going to be using. + */ +unsigned int +uart_get_baud_rate(struct uart_port *port, struct termios *termios, + struct termios *old, unsigned int min, unsigned int max) +{ + unsigned int try, baud, altbaud = 38400; + unsigned int flags = port->flags & UPF_SPD_MASK; + + if (flags == UPF_SPD_HI) + altbaud = 57600; + if (flags == UPF_SPD_VHI) + altbaud = 115200; + if (flags == UPF_SPD_SHI) + altbaud = 230400; + if (flags == UPF_SPD_WARP) + altbaud = 460800; + + for (try = 0; try < 2; try++) { + baud = tty_termios_baud_rate(termios); + + /* + * The spd_hi, spd_vhi, spd_shi, spd_warp kludge... + * Die! Die! Die! + */ + if (baud == 38400) + baud = altbaud; + + /* + * Special case: B0 rate. + */ + if (baud == 0) + baud = 9600; + + if (baud >= min && baud <= max) + return baud; + + /* + * Oops, the quotient was zero. Try again with + * the old baud rate if possible. + */ + termios->c_cflag &= ~CBAUD; + if (old) { + termios->c_cflag |= old->c_cflag & CBAUD; + old = NULL; + continue; + } + + /* + * As a last resort, if the quotient is zero, + * default to 9600 bps + */ + termios->c_cflag |= B9600; + } + + return 0; +} + +EXPORT_SYMBOL(uart_get_baud_rate); + +/** + * uart_get_divisor - return uart clock divisor + * @port: uart_port structure describing the port. + * @baud: desired baud rate + * + * Calculate the uart clock divisor for the port. + */ +unsigned int +uart_get_divisor(struct uart_port *port, unsigned int baud) +{ + unsigned int quot; + + /* + * Old custom speed handling. + */ + if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) + quot = port->custom_divisor; + else + quot = (port->uartclk + (8 * baud)) / (16 * baud); + + return quot; +} + +EXPORT_SYMBOL(uart_get_divisor); + +static void +uart_change_speed(struct uart_state *state, struct termios *old_termios) +{ + struct tty_struct *tty = state->info->tty; + struct uart_port *port = state->port; + struct termios *termios; + + /* + * If we have no tty, termios, or the port does not exist, + * then we can't set the parameters for this port. + */ + if (!tty || !tty->termios || port->type == PORT_UNKNOWN) + return; + + termios = tty->termios; + + /* + * Set flags based on termios cflag + */ + if (termios->c_cflag & CRTSCTS) + state->info->flags |= UIF_CTS_FLOW; + else + state->info->flags &= ~UIF_CTS_FLOW; + + if (termios->c_cflag & CLOCAL) + state->info->flags &= ~UIF_CHECK_CD; + else + state->info->flags |= UIF_CHECK_CD; + + port->ops->set_termios(port, termios, old_termios); +} + +static inline void +__uart_put_char(struct uart_port *port, struct circ_buf *circ, unsigned char c) +{ + unsigned long flags; + + if (!circ->buf) + return; + + spin_lock_irqsave(&port->lock, flags); + if (uart_circ_chars_free(circ) != 0) { + circ->buf[circ->head] = c; + circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1); + } + spin_unlock_irqrestore(&port->lock, flags); +} + +static void uart_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct uart_state *state = tty->driver_data; + + __uart_put_char(state->port, &state->info->xmit, ch); +} + +static void uart_flush_chars(struct tty_struct *tty) +{ + uart_start(tty); +} + +static int +uart_write(struct tty_struct *tty, const unsigned char * buf, int count) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + struct circ_buf *circ = &state->info->xmit; + unsigned long flags; + int c, ret = 0; + + if (!circ->buf) + return 0; + + spin_lock_irqsave(&port->lock, flags); + while (1) { + c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) + break; + memcpy(circ->buf + circ->head, buf, c); + circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1); + buf += c; + count -= c; + ret += c; + } + spin_unlock_irqrestore(&port->lock, flags); + + uart_start(tty); + return ret; +} + +static int uart_write_room(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + + return uart_circ_chars_free(&state->info->xmit); +} + +static int uart_chars_in_buffer(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + + return uart_circ_chars_pending(&state->info->xmit); +} + +static void uart_flush_buffer(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + unsigned long flags; + + DPRINTK("uart_flush_buffer(%d) called\n", tty->index); + + spin_lock_irqsave(&port->lock, flags); + uart_circ_clear(&state->info->xmit); + spin_unlock_irqrestore(&port->lock, flags); + tty_wakeup(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void uart_send_xchar(struct tty_struct *tty, char ch) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + unsigned long flags; + + if (port->ops->send_xchar) + port->ops->send_xchar(port, ch); + else { + port->x_char = ch; + if (ch) { + spin_lock_irqsave(&port->lock, flags); + port->ops->start_tx(port, 0); + spin_unlock_irqrestore(&port->lock, flags); + } + } +} + +static void uart_throttle(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + + if (I_IXOFF(tty)) + uart_send_xchar(tty, STOP_CHAR(tty)); + + if (tty->termios->c_cflag & CRTSCTS) + uart_clear_mctrl(state->port, TIOCM_RTS); +} + +static void uart_unthrottle(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + + if (I_IXOFF(tty)) { + if (port->x_char) + port->x_char = 0; + else + uart_send_xchar(tty, START_CHAR(tty)); + } + + if (tty->termios->c_cflag & CRTSCTS) + uart_set_mctrl(port, TIOCM_RTS); +} + +static int uart_get_info(struct uart_state *state, + struct serial_struct __user *retinfo) +{ + struct uart_port *port = state->port; + struct serial_struct tmp; + + memset(&tmp, 0, sizeof(tmp)); + tmp.type = port->type; + tmp.line = port->line; + tmp.port = port->iobase; + if (HIGH_BITS_OFFSET) + tmp.port_high = (long) port->iobase >> HIGH_BITS_OFFSET; + tmp.irq = port->irq; + tmp.flags = port->flags; + tmp.xmit_fifo_size = port->fifosize; + tmp.baud_base = port->uartclk / 16; + tmp.close_delay = state->close_delay / 10; + tmp.closing_wait = state->closing_wait == USF_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + state->closing_wait / 10; + tmp.custom_divisor = port->custom_divisor; + tmp.hub6 = port->hub6; + tmp.io_type = port->iotype; + tmp.iomem_reg_shift = port->regshift; + tmp.iomem_base = (void *)port->mapbase; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int uart_set_info(struct uart_state *state, + struct serial_struct __user *newinfo) +{ + struct serial_struct new_serial; + struct uart_port *port = state->port; + unsigned long new_port; + unsigned int change_irq, change_port, old_flags, closing_wait; + unsigned int old_custom_divisor, close_delay; + int retval = 0; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + + new_port = new_serial.port; + if (HIGH_BITS_OFFSET) + new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; + + new_serial.irq = irq_canonicalize(new_serial.irq); + close_delay = new_serial.close_delay * 10; + closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + USF_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; + + /* + * This semaphore protects state->count. It is also + * very useful to prevent opens. Also, take the + * port configuration semaphore to make sure that a + * module insertion/removal doesn't change anything + * under us. + */ + down(&state->sem); + + change_irq = new_serial.irq != port->irq; + + /* + * Since changing the 'type' of the port changes its resource + * allocations, we should treat type changes the same as + * IO port changes. + */ + change_port = new_port != port->iobase || + (unsigned long)new_serial.iomem_base != port->mapbase || + new_serial.hub6 != port->hub6 || + new_serial.io_type != port->iotype || + new_serial.iomem_reg_shift != port->regshift || + new_serial.type != port->type; + + old_flags = port->flags; + old_custom_divisor = port->custom_divisor; + + if (!capable(CAP_SYS_ADMIN)) { + retval = -EPERM; + if (change_irq || change_port || + (new_serial.baud_base != port->uartclk / 16) || + (close_delay != state->close_delay) || + (closing_wait != state->closing_wait) || + (new_serial.xmit_fifo_size != port->fifosize) || + (((new_serial.flags ^ old_flags) & ~UPF_USR_MASK) != 0)) + goto exit; + port->flags = ((port->flags & ~UPF_USR_MASK) | + (new_serial.flags & UPF_USR_MASK)); + port->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + /* + * Ask the low level driver to verify the settings. + */ + if (port->ops->verify_port) + retval = port->ops->verify_port(port, &new_serial); + + if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) || + (new_serial.baud_base < 9600)) + retval = -EINVAL; + + if (retval) + goto exit; + + if (change_port || change_irq) { + retval = -EBUSY; + + /* + * Make sure that we are the sole user of this port. + */ + if (uart_users(state) > 1) + goto exit; + + /* + * We need to shutdown the serial port at the old + * port/type/irq combination. + */ + uart_shutdown(state); + } + + if (change_port) { + unsigned long old_iobase, old_mapbase; + unsigned int old_type, old_iotype, old_hub6, old_shift; + + old_iobase = port->iobase; + old_mapbase = port->mapbase; + old_type = port->type; + old_hub6 = port->hub6; + old_iotype = port->iotype; + old_shift = port->regshift; + + /* + * Free and release old regions + */ + if (old_type != PORT_UNKNOWN) + port->ops->release_port(port); + + port->iobase = new_port; + port->type = new_serial.type; + port->hub6 = new_serial.hub6; + port->iotype = new_serial.io_type; + port->regshift = new_serial.iomem_reg_shift; + port->mapbase = (unsigned long)new_serial.iomem_base; + + /* + * Claim and map the new regions + */ + if (port->type != PORT_UNKNOWN) { + retval = port->ops->request_port(port); + } else { + /* Always success - Jean II */ + retval = 0; + } + + /* + * If we fail to request resources for the + * new port, try to restore the old settings. + */ + if (retval && old_type != PORT_UNKNOWN) { + port->iobase = old_iobase; + port->type = old_type; + port->hub6 = old_hub6; + port->iotype = old_iotype; + port->regshift = old_shift; + port->mapbase = old_mapbase; + retval = port->ops->request_port(port); + /* + * If we failed to restore the old settings, + * we fail like this. + */ + if (retval) + port->type = PORT_UNKNOWN; + + /* + * We failed anyway. + */ + retval = -EBUSY; + } + } + + port->irq = new_serial.irq; + port->uartclk = new_serial.baud_base * 16; + port->flags = (port->flags & ~UPF_CHANGE_MASK) | + (new_serial.flags & UPF_CHANGE_MASK); + port->custom_divisor = new_serial.custom_divisor; + state->close_delay = close_delay; + state->closing_wait = closing_wait; + port->fifosize = new_serial.xmit_fifo_size; + if (state->info->tty) + state->info->tty->low_latency = + (port->flags & UPF_LOW_LATENCY) ? 1 : 0; + + check_and_exit: + retval = 0; + if (port->type == PORT_UNKNOWN) + goto exit; + if (state->info->flags & UIF_INITIALIZED) { + if (((old_flags ^ port->flags) & UPF_SPD_MASK) || + old_custom_divisor != port->custom_divisor) { + /* + * If they're setting up a custom divisor or speed, + * instead of clearing it, then bitch about it. No + * need to rate-limit; it's CAP_SYS_ADMIN only. + */ + if (port->flags & UPF_SPD_MASK) { + char buf[64]; + printk(KERN_NOTICE + "%s sets custom speed on %s. This " + "is deprecated.\n", current->comm, + tty_name(state->info->tty, buf)); + } + uart_change_speed(state, NULL); + } + } else + retval = uart_startup(state, 1); + exit: + up(&state->sem); + return retval; +} + + +/* + * uart_get_lsr_info - get line status register info. + * Note: uart_ioctl protects us against hangups. + */ +static int uart_get_lsr_info(struct uart_state *state, + unsigned int __user *value) +{ + struct uart_port *port = state->port; + unsigned int result; + + result = port->ops->tx_empty(port); + + /* + * If we're about to load something into the transmit + * register, we'll pretend the transmitter isn't empty to + * avoid a race condition (depending on when the transmit + * interrupt happens). + */ + if (port->x_char || + ((uart_circ_chars_pending(&state->info->xmit) > 0) && + !state->info->tty->stopped && !state->info->tty->hw_stopped)) + result &= ~TIOCSER_TEMT; + + return put_user(result, value); +} + +static int uart_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + int result = -EIO; + + down(&state->sem); + if ((!file || !tty_hung_up_p(file)) && + !(tty->flags & (1 << TTY_IO_ERROR))) { + result = port->mctrl; + result |= port->ops->get_mctrl(port); + } + up(&state->sem); + + return result; +} + +static int +uart_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + int ret = -EIO; + + down(&state->sem); + if ((!file || !tty_hung_up_p(file)) && + !(tty->flags & (1 << TTY_IO_ERROR))) { + uart_update_mctrl(port, set, clear); + ret = 0; + } + up(&state->sem); + return ret; +} + +static void uart_break_ctl(struct tty_struct *tty, int break_state) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + + BUG_ON(!kernel_locked()); + + down(&state->sem); + + if (port->type != PORT_UNKNOWN) + port->ops->break_ctl(port, break_state); + + up(&state->sem); +} + +static int uart_do_autoconfig(struct uart_state *state) +{ + struct uart_port *port = state->port; + int flags, ret; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + /* + * Take the per-port semaphore. This prevents count from + * changing, and hence any extra opens of the port while + * we're auto-configuring. + */ + if (down_interruptible(&state->sem)) + return -ERESTARTSYS; + + ret = -EBUSY; + if (uart_users(state) == 1) { + uart_shutdown(state); + + /* + * If we already have a port type configured, + * we must release its resources. + */ + if (port->type != PORT_UNKNOWN) + port->ops->release_port(port); + + flags = UART_CONFIG_TYPE; + if (port->flags & UPF_AUTO_IRQ) + flags |= UART_CONFIG_IRQ; + + /* + * This will claim the ports resources if + * a port is found. + */ + port->ops->config_port(port, flags); + + ret = uart_startup(state, 1); + } + up(&state->sem); + return ret; +} + +/* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ +static int +uart_wait_modem_status(struct uart_state *state, unsigned long arg) +{ + struct uart_port *port = state->port; + DECLARE_WAITQUEUE(wait, current); + struct uart_icount cprev, cnow; + int ret; + + /* + * note the counters on entry + */ + spin_lock_irq(&port->lock); + memcpy(&cprev, &port->icount, sizeof(struct uart_icount)); + + /* + * Force modem status interrupts on + */ + port->ops->enable_ms(port); + spin_unlock_irq(&port->lock); + + add_wait_queue(&state->info->delta_msr_wait, &wait); + for (;;) { + spin_lock_irq(&port->lock); + memcpy(&cnow, &port->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&port->lock); + + set_current_state(TASK_INTERRUPTIBLE); + + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + ret = 0; + break; + } + + schedule(); + + /* see if a signal did it */ + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + + cprev = cnow; + } + + current->state = TASK_RUNNING; + remove_wait_queue(&state->info->delta_msr_wait, &wait); + + return ret; +} + +/* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ +static int uart_get_count(struct uart_state *state, + struct serial_icounter_struct __user *icnt) +{ + struct serial_icounter_struct icount; + struct uart_icount cnow; + struct uart_port *port = state->port; + + spin_lock_irq(&port->lock); + memcpy(&cnow, &port->icount, sizeof(struct uart_icount)); + spin_unlock_irq(&port->lock); + + icount.cts = cnow.cts; + icount.dsr = cnow.dsr; + icount.rng = cnow.rng; + icount.dcd = cnow.dcd; + icount.rx = cnow.rx; + icount.tx = cnow.tx; + icount.frame = cnow.frame; + icount.overrun = cnow.overrun; + icount.parity = cnow.parity; + icount.brk = cnow.brk; + icount.buf_overrun = cnow.buf_overrun; + + return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0; +} + +/* + * Called via sys_ioctl under the BKL. We can use spin_lock_irq() here. + */ +static int +uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct uart_state *state = tty->driver_data; + void __user *uarg = (void __user *)arg; + int ret = -ENOIOCTLCMD; + + BUG_ON(!kernel_locked()); + + /* + * These ioctls don't rely on the hardware to be present. + */ + switch (cmd) { + case TIOCGSERIAL: + ret = uart_get_info(state, uarg); + break; + + case TIOCSSERIAL: + ret = uart_set_info(state, uarg); + break; + + case TIOCSERCONFIG: + ret = uart_do_autoconfig(state); + break; + + case TIOCSERGWILD: /* obsolete */ + case TIOCSERSWILD: /* obsolete */ + ret = 0; + break; + } + + if (ret != -ENOIOCTLCMD) + goto out; + + if (tty->flags & (1 << TTY_IO_ERROR)) { + ret = -EIO; + goto out; + } + + /* + * The following should only be used when hardware is present. + */ + switch (cmd) { + case TIOCMIWAIT: + ret = uart_wait_modem_status(state, arg); + break; + + case TIOCGICOUNT: + ret = uart_get_count(state, uarg); + break; + } + + if (ret != -ENOIOCTLCMD) + goto out; + + down(&state->sem); + + if (tty_hung_up_p(filp)) { + ret = -EIO; + goto out_up; + } + + /* + * All these rely on hardware being present and need to be + * protected against the tty being hung up. + */ + switch (cmd) { + case TIOCSERGETLSR: /* Get line status register */ + ret = uart_get_lsr_info(state, uarg); + break; + + default: { + struct uart_port *port = state->port; + if (port->ops->ioctl) + ret = port->ops->ioctl(port, cmd, arg); + break; + } + } + out_up: + up(&state->sem); + out: + return ret; +} + +static void uart_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + struct uart_state *state = tty->driver_data; + unsigned long flags; + unsigned int cflag = tty->termios->c_cflag; + + BUG_ON(!kernel_locked()); + + /* + * These are the bits that are used to setup various + * flags in the low level driver. + */ +#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + + if ((cflag ^ old_termios->c_cflag) == 0 && + RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0) + return; + + uart_change_speed(state, old_termios); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD)) + uart_clear_mctrl(state->port, TIOCM_RTS | TIOCM_DTR); + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { + unsigned int mask = TIOCM_DTR; + if (!(cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) + mask |= TIOCM_RTS; + uart_set_mctrl(state->port, mask); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { + spin_lock_irqsave(&state->port->lock, flags); + tty->hw_stopped = 0; + __uart_start(tty); + spin_unlock_irqrestore(&state->port->lock, flags); + } + +#if 0 + /* + * No need to wake up processes in open wait, since they + * sample the CLOCAL flag once, and don't recheck it. + * XXX It's not clear whether the current behavior is correct + * or not. Hence, this may change..... + */ + if (!(old_termios->c_cflag & CLOCAL) && + (tty->termios->c_cflag & CLOCAL)) + wake_up_interruptible(&state->info->open_wait); +#endif +} + +/* + * In 2.4.5, calls to this will be serialized via the BKL in + * linux/drivers/char/tty_io.c:tty_release() + * linux/drivers/char/tty_io.c:do_tty_handup() + */ +static void uart_close(struct tty_struct *tty, struct file *filp) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port; + + BUG_ON(!kernel_locked()); + + if (!state || !state->port) + return; + + port = state->port; + + DPRINTK("uart_close(%d) called\n", port->line); + + down(&state->sem); + + if (tty_hung_up_p(filp)) + goto done; + + if ((tty->count == 1) && (state->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. state->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, " + "state->count is %d\n", state->count); + state->count = 1; + } + if (--state->count < 0) { + printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n", + tty->name, state->count); + state->count = 0; + } + if (state->count) + goto done; + + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters by + * setting tty->closing. + */ + tty->closing = 1; + + if (state->closing_wait != USF_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, msecs_to_jiffies(state->closing_wait)); + + /* + * At this point, we stop accepting input. To do this, we + * disable the receive line status interrupts. + */ + if (state->info->flags & UIF_INITIALIZED) { + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); + port->ops->stop_rx(port); + spin_unlock_irqrestore(&port->lock, flags); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + uart_wait_until_sent(tty, port->timeout); + } + + uart_shutdown(state); + uart_flush_buffer(tty); + + tty_ldisc_flush(tty); + + tty->closing = 0; + state->info->tty = NULL; + + if (state->info->blocked_open) { + if (state->close_delay) + msleep_interruptible(state->close_delay); + } else if (!uart_console(port)) { + uart_change_pm(state, 3); + } + + /* + * Wake up anyone trying to open this port. + */ + state->info->flags &= ~UIF_NORMAL_ACTIVE; + wake_up_interruptible(&state->info->open_wait); + + done: + up(&state->sem); +} + +static void uart_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + unsigned long char_time, expire; + + BUG_ON(!kernel_locked()); + + if (port->type == PORT_UNKNOWN || port->fifosize == 0) + return; + + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (port->timeout - HZ/50) / port->fifosize; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout && timeout < char_time) + char_time = timeout; + + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than port->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*port->timeout. + */ + if (timeout == 0 || timeout > 2 * port->timeout) + timeout = 2 * port->timeout; + + expire = jiffies + timeout; + + DPRINTK("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n", + port->line, jiffies, expire); + + /* + * Check whether the transmitter is empty every 'char_time'. + * 'timeout' / 'expire' give us the maximum amount of time + * we wait. + */ + while (!port->ops->tx_empty(port)) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (time_after(jiffies, expire)) + break; + } + set_current_state(TASK_RUNNING); /* might not be needed */ +} + +/* + * This is called with the BKL held in + * linux/drivers/char/tty_io.c:do_tty_hangup() + * We're called from the eventd thread, so we can sleep for + * a _short_ time only. + */ +static void uart_hangup(struct tty_struct *tty) +{ + struct uart_state *state = tty->driver_data; + + BUG_ON(!kernel_locked()); + DPRINTK("uart_hangup(%d)\n", state->port->line); + + down(&state->sem); + if (state->info && state->info->flags & UIF_NORMAL_ACTIVE) { + uart_flush_buffer(tty); + uart_shutdown(state); + state->count = 0; + state->info->flags &= ~UIF_NORMAL_ACTIVE; + state->info->tty = NULL; + wake_up_interruptible(&state->info->open_wait); + wake_up_interruptible(&state->info->delta_msr_wait); + } + up(&state->sem); +} + +/* + * Copy across the serial console cflag setting into the termios settings + * for the initial open of the port. This allows continuity between the + * kernel settings, and the settings init adopts when it opens the port + * for the first time. + */ +static void uart_update_termios(struct uart_state *state) +{ + struct tty_struct *tty = state->info->tty; + struct uart_port *port = state->port; + + if (uart_console(port) && port->cons->cflag) { + tty->termios->c_cflag = port->cons->cflag; + port->cons->cflag = 0; + } + + /* + * If the device failed to grab its irq resources, + * or some other error occurred, don't try to talk + * to the port hardware. + */ + if (!(tty->flags & (1 << TTY_IO_ERROR))) { + /* + * Make termios settings take effect. + */ + uart_change_speed(state, NULL); + + /* + * And finally enable the RTS and DTR signals. + */ + if (tty->termios->c_cflag & CBAUD) + uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + } +} + +/* + * Block the open until the port is ready. We must be called with + * the per-port semaphore held. + */ +static int +uart_block_til_ready(struct file *filp, struct uart_state *state) +{ + DECLARE_WAITQUEUE(wait, current); + struct uart_info *info = state->info; + struct uart_port *port = state->port; + + info->blocked_open++; + state->count--; + + add_wait_queue(&info->open_wait, &wait); + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + + /* + * If we have been hung up, tell userspace/restart open. + */ + if (tty_hung_up_p(filp) || info->tty == NULL) + break; + + /* + * If the port has been closed, tell userspace/restart open. + */ + if (!(info->flags & UIF_INITIALIZED)) + break; + + /* + * If non-blocking mode is set, or CLOCAL mode is set, + * we don't want to wait for the modem status lines to + * indicate that the port is ready. + * + * Also, if the port is not enabled/configured, we want + * to allow the open to succeed here. Note that we will + * have set TTY_IO_ERROR for a non-existant port. + */ + if ((filp->f_flags & O_NONBLOCK) || + (info->tty->termios->c_cflag & CLOCAL) || + (info->tty->flags & (1 << TTY_IO_ERROR))) { + break; + } + + /* + * Set DTR to allow modem to know we're waiting. Do + * not set RTS here - we want to make sure we catch + * the data from the modem. + */ + if (info->tty->termios->c_cflag & CBAUD) + uart_set_mctrl(port, TIOCM_DTR); + + /* + * and wait for the carrier to indicate that the + * modem is ready for us. + */ + if (port->ops->get_mctrl(port) & TIOCM_CAR) + break; + + up(&state->sem); + schedule(); + down(&state->sem); + + if (signal_pending(current)) + break; + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + + state->count++; + info->blocked_open--; + + if (signal_pending(current)) + return -ERESTARTSYS; + + if (!info->tty || tty_hung_up_p(filp)) + return -EAGAIN; + + return 0; +} + +static struct uart_state *uart_get(struct uart_driver *drv, int line) +{ + struct uart_state *state; + + down(&port_sem); + state = drv->state + line; + if (down_interruptible(&state->sem)) { + state = ERR_PTR(-ERESTARTSYS); + goto out; + } + + state->count++; + if (!state->port) { + state->count--; + up(&state->sem); + state = ERR_PTR(-ENXIO); + goto out; + } + + if (!state->info) { + state->info = kmalloc(sizeof(struct uart_info), GFP_KERNEL); + if (state->info) { + memset(state->info, 0, sizeof(struct uart_info)); + init_waitqueue_head(&state->info->open_wait); + init_waitqueue_head(&state->info->delta_msr_wait); + + /* + * Link the info into the other structures. + */ + state->port->info = state->info; + + tasklet_init(&state->info->tlet, uart_tasklet_action, + (unsigned long)state); + } else { + state->count--; + up(&state->sem); + state = ERR_PTR(-ENOMEM); + } + } + + out: + up(&port_sem); + return state; +} + +/* + * In 2.4.5, calls to uart_open are serialised by the BKL in + * linux/fs/devices.c:chrdev_open() + * Note that if this fails, then uart_close() _will_ be called. + * + * In time, we want to scrap the "opening nonpresent ports" + * behaviour and implement an alternative way for setserial + * to set base addresses/ports/types. This will allow us to + * get rid of a certain amount of extra tests. + */ +static int uart_open(struct tty_struct *tty, struct file *filp) +{ + struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state; + struct uart_state *state; + int retval, line = tty->index; + + BUG_ON(!kernel_locked()); + DPRINTK("uart_open(%d) called\n", line); + + /* + * tty->driver->num won't change, so we won't fail here with + * tty->driver_data set to something non-NULL (and therefore + * we won't get caught by uart_close()). + */ + retval = -ENODEV; + if (line >= tty->driver->num) + goto fail; + + /* + * We take the semaphore inside uart_get to guarantee that we won't + * be re-entered while allocating the info structure, or while we + * request any IRQs that the driver may need. This also has the nice + * side-effect that it delays the action of uart_hangup, so we can + * guarantee that info->tty will always contain something reasonable. + */ + state = uart_get(drv, line); + if (IS_ERR(state)) { + retval = PTR_ERR(state); + goto fail; + } + + /* + * Once we set tty->driver_data here, we are guaranteed that + * uart_close() will decrement the driver module use count. + * Any failures from here onwards should not touch the count. + */ + tty->driver_data = state; + tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0; + tty->alt_speed = 0; + state->info->tty = tty; + + /* + * If the port is in the middle of closing, bail out now. + */ + if (tty_hung_up_p(filp)) { + retval = -EAGAIN; + state->count--; + up(&state->sem); + goto fail; + } + + /* + * Make sure the device is in D0 state. + */ + if (state->count == 1) + uart_change_pm(state, 0); + + /* + * Start up the serial port. + */ + retval = uart_startup(state, 0); + + /* + * If we succeeded, wait until the port is ready. + */ + if (retval == 0) + retval = uart_block_til_ready(filp, state); + up(&state->sem); + + /* + * If this is the first open to succeed, adjust things to suit. + */ + if (retval == 0 && !(state->info->flags & UIF_NORMAL_ACTIVE)) { + state->info->flags |= UIF_NORMAL_ACTIVE; + + uart_update_termios(state); + } + + fail: + return retval; +} + +static const char *uart_type(struct uart_port *port) +{ + const char *str = NULL; + + if (port->ops->type) + str = port->ops->type(port); + + if (!str) + str = "unknown"; + + return str; +} + +#ifdef CONFIG_PROC_FS + +static int uart_line_info(char *buf, struct uart_driver *drv, int i) +{ + struct uart_state *state = drv->state + i; + struct uart_port *port = state->port; + char stat_buf[32]; + unsigned int status; + int ret; + + if (!port) + return 0; + + ret = sprintf(buf, "%d: uart:%s %s%08lX irq:%d", + port->line, uart_type(port), + port->iotype == UPIO_MEM ? "mmio:0x" : "port:", + port->iotype == UPIO_MEM ? port->mapbase : + (unsigned long) port->iobase, + port->irq); + + if (port->type == PORT_UNKNOWN) { + strcat(buf, "\n"); + return ret + 1; + } + + if(capable(CAP_SYS_ADMIN)) + { + status = port->ops->get_mctrl(port); + + ret += sprintf(buf + ret, " tx:%d rx:%d", + port->icount.tx, port->icount.rx); + if (port->icount.frame) + ret += sprintf(buf + ret, " fe:%d", + port->icount.frame); + if (port->icount.parity) + ret += sprintf(buf + ret, " pe:%d", + port->icount.parity); + if (port->icount.brk) + ret += sprintf(buf + ret, " brk:%d", + port->icount.brk); + if (port->icount.overrun) + ret += sprintf(buf + ret, " oe:%d", + port->icount.overrun); + +#define INFOBIT(bit,str) \ + if (port->mctrl & (bit)) \ + strncat(stat_buf, (str), sizeof(stat_buf) - \ + strlen(stat_buf) - 2) +#define STATBIT(bit,str) \ + if (status & (bit)) \ + strncat(stat_buf, (str), sizeof(stat_buf) - \ + strlen(stat_buf) - 2) + + stat_buf[0] = '\0'; + stat_buf[1] = '\0'; + INFOBIT(TIOCM_RTS, "|RTS"); + STATBIT(TIOCM_CTS, "|CTS"); + INFOBIT(TIOCM_DTR, "|DTR"); + STATBIT(TIOCM_DSR, "|DSR"); + STATBIT(TIOCM_CAR, "|CD"); + STATBIT(TIOCM_RNG, "|RI"); + if (stat_buf[0]) + stat_buf[0] = ' '; + strcat(stat_buf, "\n"); + + ret += sprintf(buf + ret, stat_buf); + } else { + strcat(buf, "\n"); + ret++; + } +#undef STATBIT +#undef INFOBIT + return ret; +} + +static int uart_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + struct tty_driver *ttydrv = data; + struct uart_driver *drv = ttydrv->driver_state; + int i, len = 0, l; + off_t begin = 0; + + len += sprintf(page, "serinfo:1.0 driver%s%s revision:%s\n", + "", "", ""); + for (i = 0; i < drv->nr && len < PAGE_SIZE - 96; i++) { + l = uart_line_info(page + len, drv, i); + len += l; + if (len + begin > off + count) + goto done; + if (len + begin < off) { + begin += len; + len = 0; + } + } + *eof = 1; + done: + if (off >= len + begin) + return 0; + *start = page + (off - begin); + return (count < begin + len - off) ? count : (begin + len - off); +} +#endif + +#ifdef CONFIG_SERIAL_CORE_CONSOLE +/* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ +struct uart_port * __init +uart_get_console(struct uart_port *ports, int nr, struct console *co) +{ + int idx = co->index; + + if (idx < 0 || idx >= nr || (ports[idx].iobase == 0 && + ports[idx].membase == NULL)) + for (idx = 0; idx < nr; idx++) + if (ports[idx].iobase != 0 || + ports[idx].membase != NULL) + break; + + co->index = idx; + + return ports + idx; +} + +/** + * uart_parse_options - Parse serial port baud/parity/bits/flow contro. + * @options: pointer to option string + * @baud: pointer to an 'int' variable for the baud rate. + * @parity: pointer to an 'int' variable for the parity. + * @bits: pointer to an 'int' variable for the number of data bits. + * @flow: pointer to an 'int' variable for the flow control character. + * + * uart_parse_options decodes a string containing the serial console + * options. The format of the string is , + * eg: 115200n8r + */ +void __init +uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow) +{ + char *s = options; + + *baud = simple_strtoul(s, NULL, 10); + while (*s >= '0' && *s <= '9') + s++; + if (*s) + *parity = *s++; + if (*s) + *bits = *s++ - '0'; + if (*s) + *flow = *s; +} + +struct baud_rates { + unsigned int rate; + unsigned int cflag; +}; + +static struct baud_rates baud_rates[] = { + { 921600, B921600 }, + { 460800, B460800 }, + { 230400, B230400 }, + { 115200, B115200 }, + { 57600, B57600 }, + { 38400, B38400 }, + { 19200, B19200 }, + { 9600, B9600 }, + { 4800, B4800 }, + { 2400, B2400 }, + { 1200, B1200 }, + { 0, B38400 } +}; + +/** + * uart_set_options - setup the serial console parameters + * @port: pointer to the serial ports uart_port structure + * @co: console pointer + * @baud: baud rate + * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even) + * @bits: number of data bits + * @flow: flow control character - 'r' (rts) + */ +int __init +uart_set_options(struct uart_port *port, struct console *co, + int baud, int parity, int bits, int flow) +{ + struct termios termios; + int i; + + memset(&termios, 0, sizeof(struct termios)); + + termios.c_cflag = CREAD | HUPCL | CLOCAL; + + /* + * Construct a cflag setting. + */ + for (i = 0; baud_rates[i].rate; i++) + if (baud_rates[i].rate <= baud) + break; + + termios.c_cflag |= baud_rates[i].cflag; + + if (bits == 7) + termios.c_cflag |= CS7; + else + termios.c_cflag |= CS8; + + switch (parity) { + case 'o': case 'O': + termios.c_cflag |= PARODD; + /*fall through*/ + case 'e': case 'E': + termios.c_cflag |= PARENB; + break; + } + + if (flow == 'r') + termios.c_cflag |= CRTSCTS; + + port->ops->set_termios(port, &termios, NULL); + co->cflag = termios.c_cflag; + + return 0; +} +#endif /* CONFIG_SERIAL_CORE_CONSOLE */ + +static void uart_change_pm(struct uart_state *state, int pm_state) +{ + struct uart_port *port = state->port; + if (port->ops->pm) + port->ops->pm(port, pm_state, state->pm_state); + state->pm_state = pm_state; +} + +int uart_suspend_port(struct uart_driver *drv, struct uart_port *port) +{ + struct uart_state *state = drv->state + port->line; + + down(&state->sem); + + if (state->info && state->info->flags & UIF_INITIALIZED) { + struct uart_ops *ops = port->ops; + + spin_lock_irq(&port->lock); + ops->stop_tx(port, 0); + ops->set_mctrl(port, 0); + ops->stop_rx(port); + spin_unlock_irq(&port->lock); + + /* + * Wait for the transmitter to empty. + */ + while (!ops->tx_empty(port)) { + msleep(10); + } + + ops->shutdown(port); + } + + /* + * Disable the console device before suspending. + */ + if (uart_console(port)) + console_stop(port->cons); + + uart_change_pm(state, 3); + + up(&state->sem); + + return 0; +} + +int uart_resume_port(struct uart_driver *drv, struct uart_port *port) +{ + struct uart_state *state = drv->state + port->line; + + down(&state->sem); + + uart_change_pm(state, 0); + + /* + * Re-enable the console device after suspending. + */ + if (uart_console(port)) { + struct termios termios; + + /* + * First try to use the console cflag setting. + */ + memset(&termios, 0, sizeof(struct termios)); + termios.c_cflag = port->cons->cflag; + + /* + * If that's unset, use the tty termios setting. + */ + if (state->info && state->info->tty && termios.c_cflag == 0) + termios = *state->info->tty->termios; + + port->ops->set_termios(port, &termios, NULL); + console_start(port->cons); + } + + if (state->info && state->info->flags & UIF_INITIALIZED) { + struct uart_ops *ops = port->ops; + + ops->set_mctrl(port, 0); + ops->startup(port); + uart_change_speed(state, NULL); + spin_lock_irq(&port->lock); + ops->set_mctrl(port, port->mctrl); + ops->start_tx(port, 0); + spin_unlock_irq(&port->lock); + } + + up(&state->sem); + + return 0; +} + +static inline void +uart_report_port(struct uart_driver *drv, struct uart_port *port) +{ + printk("%s%d", drv->dev_name, port->line); + printk(" at "); + switch (port->iotype) { + case UPIO_PORT: + printk("I/O 0x%x", port->iobase); + break; + case UPIO_HUB6: + printk("I/O 0x%x offset 0x%x", port->iobase, port->hub6); + break; + case UPIO_MEM: + case UPIO_MEM32: + printk("MMIO 0x%lx", port->mapbase); + break; + } + printk(" (irq = %d) is a %s\n", port->irq, uart_type(port)); +} + +static void +uart_configure_port(struct uart_driver *drv, struct uart_state *state, + struct uart_port *port) +{ + unsigned int flags; + + /* + * If there isn't a port here, don't do anything further. + */ + if (!port->iobase && !port->mapbase && !port->membase) + return; + + /* + * Now do the auto configuration stuff. Note that config_port + * is expected to claim the resources and map the port for us. + */ + flags = UART_CONFIG_TYPE; + if (port->flags & UPF_AUTO_IRQ) + flags |= UART_CONFIG_IRQ; + if (port->flags & UPF_BOOT_AUTOCONF) { + port->type = PORT_UNKNOWN; + port->ops->config_port(port, flags); + } + + if (port->type != PORT_UNKNOWN) { + unsigned long flags; + + uart_report_port(drv, port); + + /* + * Ensure that the modem control lines are de-activated. + * We probably don't need a spinlock around this, but + */ + spin_lock_irqsave(&port->lock, flags); + port->ops->set_mctrl(port, 0); + spin_unlock_irqrestore(&port->lock, flags); + + /* + * Power down all ports by default, except the + * console if we have one. + */ + if (!uart_console(port)) + uart_change_pm(state, 3); + } +} + +/* + * This reverses the effects of uart_configure_port, hanging up the + * port before removal. + */ +static void +uart_unconfigure_port(struct uart_driver *drv, struct uart_state *state) +{ + struct uart_port *port = state->port; + struct uart_info *info = state->info; + + if (info && info->tty) + tty_vhangup(info->tty); + + down(&state->sem); + + state->info = NULL; + + /* + * Free the port IO and memory resources, if any. + */ + if (port->type != PORT_UNKNOWN) + port->ops->release_port(port); + + /* + * Indicate that there isn't a port here anymore. + */ + port->type = PORT_UNKNOWN; + + /* + * Kill the tasklet, and free resources. + */ + if (info) { + tasklet_kill(&info->tlet); + kfree(info); + } + + up(&state->sem); +} + +static struct tty_operations uart_ops = { + .open = uart_open, + .close = uart_close, + .write = uart_write, + .put_char = uart_put_char, + .flush_chars = uart_flush_chars, + .write_room = uart_write_room, + .chars_in_buffer= uart_chars_in_buffer, + .flush_buffer = uart_flush_buffer, + .ioctl = uart_ioctl, + .throttle = uart_throttle, + .unthrottle = uart_unthrottle, + .send_xchar = uart_send_xchar, + .set_termios = uart_set_termios, + .stop = uart_stop, + .start = uart_start, + .hangup = uart_hangup, + .break_ctl = uart_break_ctl, + .wait_until_sent= uart_wait_until_sent, +#ifdef CONFIG_PROC_FS + .read_proc = uart_read_proc, +#endif + .tiocmget = uart_tiocmget, + .tiocmset = uart_tiocmset, +}; + +/** + * uart_register_driver - register a driver with the uart core layer + * @drv: low level driver structure + * + * Register a uart driver with the core driver. We in turn register + * with the tty layer, and initialise the core driver per-port state. + * + * We have a proc file in /proc/tty/driver which is named after the + * normal driver. + * + * drv->port should be NULL, and the per-port structures should be + * registered using uart_add_one_port after this call has succeeded. + */ +int uart_register_driver(struct uart_driver *drv) +{ + struct tty_driver *normal = NULL; + int i, retval; + + BUG_ON(drv->state); + + /* + * Maybe we should be using a slab cache for this, especially if + * we have a large number of ports to handle. + */ + drv->state = kmalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL); + retval = -ENOMEM; + if (!drv->state) + goto out; + + memset(drv->state, 0, sizeof(struct uart_state) * drv->nr); + + normal = alloc_tty_driver(drv->nr); + if (!normal) + goto out; + + drv->tty_driver = normal; + + normal->owner = drv->owner; + normal->driver_name = drv->driver_name; + normal->devfs_name = drv->devfs_name; + normal->name = drv->dev_name; + normal->major = drv->major; + normal->minor_start = drv->minor; + normal->type = TTY_DRIVER_TYPE_SERIAL; + normal->subtype = SERIAL_TYPE_NORMAL; + normal->init_termios = tty_std_termios; + normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; + normal->driver_state = drv; + tty_set_operations(normal, &uart_ops); + + /* + * Initialise the UART state(s). + */ + for (i = 0; i < drv->nr; i++) { + struct uart_state *state = drv->state + i; + + state->close_delay = 500; /* .5 seconds */ + state->closing_wait = 30000; /* 30 seconds */ + + init_MUTEX(&state->sem); + } + + retval = tty_register_driver(normal); + out: + if (retval < 0) { + put_tty_driver(normal); + kfree(drv->state); + } + return retval; +} + +/** + * uart_unregister_driver - remove a driver from the uart core layer + * @drv: low level driver structure + * + * Remove all references to a driver from the core driver. The low + * level driver must have removed all its ports via the + * uart_remove_one_port() if it registered them with uart_add_one_port(). + * (ie, drv->port == NULL) + */ +void uart_unregister_driver(struct uart_driver *drv) +{ + struct tty_driver *p = drv->tty_driver; + tty_unregister_driver(p); + put_tty_driver(p); + kfree(drv->state); + drv->tty_driver = NULL; +} + +struct tty_driver *uart_console_device(struct console *co, int *index) +{ + struct uart_driver *p = co->data; + *index = co->index; + return p->tty_driver; +} + +/** + * uart_add_one_port - attach a driver-defined port structure + * @drv: pointer to the uart low level driver structure for this port + * @port: uart port structure to use for this port. + * + * This allows the driver to register its own uart_port structure + * with the core driver. The main purpose is to allow the low + * level uart drivers to expand uart_port, rather than having yet + * more levels of structures. + */ +int uart_add_one_port(struct uart_driver *drv, struct uart_port *port) +{ + struct uart_state *state; + int ret = 0; + + BUG_ON(in_interrupt()); + + if (port->line >= drv->nr) + return -EINVAL; + + state = drv->state + port->line; + + down(&port_sem); + if (state->port) { + ret = -EINVAL; + goto out; + } + + state->port = port; + + spin_lock_init(&port->lock); + port->cons = drv->cons; + port->info = state->info; + + uart_configure_port(drv, state, port); + + /* + * Register the port whether it's detected or not. This allows + * setserial to be used to alter this ports parameters. + */ + tty_register_device(drv->tty_driver, port->line, port->dev); + + /* + * If this driver supports console, and it hasn't been + * successfully registered yet, try to re-register it. + * It may be that the port was not available. + */ + if (port->type != PORT_UNKNOWN && + port->cons && !(port->cons->flags & CON_ENABLED)) + register_console(port->cons); + + out: + up(&port_sem); + + return ret; +} + +/** + * uart_remove_one_port - detach a driver defined port structure + * @drv: pointer to the uart low level driver structure for this port + * @port: uart port structure for this port + * + * This unhooks (and hangs up) the specified port structure from the + * core driver. No further calls will be made to the low-level code + * for this port. + */ +int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port) +{ + struct uart_state *state = drv->state + port->line; + + BUG_ON(in_interrupt()); + + if (state->port != port) + printk(KERN_ALERT "Removing wrong port: %p != %p\n", + state->port, port); + + down(&port_sem); + + /* + * Remove the devices from devfs + */ + tty_unregister_device(drv->tty_driver, port->line); + + uart_unconfigure_port(drv, state); + state->port = NULL; + up(&port_sem); + + return 0; +} + +/* + * Are the two ports equivalent? + */ +int uart_match_port(struct uart_port *port1, struct uart_port *port2) +{ + if (port1->iotype != port2->iotype) + return 0; + + switch (port1->iotype) { + case UPIO_PORT: + return (port1->iobase == port2->iobase); + case UPIO_HUB6: + return (port1->iobase == port2->iobase) && + (port1->hub6 == port2->hub6); + case UPIO_MEM: + return (port1->membase == port2->membase); + } + return 0; +} +EXPORT_SYMBOL(uart_match_port); + +/* + * Try to find an unused uart_state slot for a port. + */ +static struct uart_state * +uart_find_match_or_unused(struct uart_driver *drv, struct uart_port *port) +{ + int i; + + /* + * First, find a port entry which matches. Note: if we do + * find a matching entry, and it has a non-zero use count, + * then we can't register the port. + */ + for (i = 0; i < drv->nr; i++) + if (uart_match_port(drv->state[i].port, port)) + return &drv->state[i]; + + /* + * We didn't find a matching entry, so look for the first + * free entry. We look for one which hasn't been previously + * used (indicated by zero iobase). + */ + for (i = 0; i < drv->nr; i++) + if (drv->state[i].port->type == PORT_UNKNOWN && + drv->state[i].port->iobase == 0 && + drv->state[i].count == 0) + return &drv->state[i]; + + /* + * That also failed. Last resort is to find any currently + * entry which doesn't have a real port associated with it. + */ + for (i = 0; i < drv->nr; i++) + if (drv->state[i].port->type == PORT_UNKNOWN && + drv->state[i].count == 0) + return &drv->state[i]; + + return NULL; +} + +/** + * uart_register_port: register uart settings with a port + * @drv: pointer to the uart low level driver structure for this port + * @port: uart port structure describing the port + * + * Register UART settings with the specified low level driver. Detect + * the type of the port if UPF_BOOT_AUTOCONF is set, and detect the + * IRQ if UPF_AUTO_IRQ is set. + * + * We try to pick the same port for the same IO base address, so that + * when a modem is plugged in, unplugged and plugged back in, it gets + * allocated the same port. + * + * Returns negative error, or positive line number. + */ +int uart_register_port(struct uart_driver *drv, struct uart_port *port) +{ + struct uart_state *state; + int ret; + + down(&port_sem); + + state = uart_find_match_or_unused(drv, port); + + if (state) { + /* + * Ok, we've found a line that we can use. + * + * If we find a port that matches this one, and it appears + * to be in-use (even if it doesn't have a type) we shouldn't + * alter it underneath itself - the port may be open and + * trying to do useful work. + */ + if (uart_users(state) != 0) { + ret = -EBUSY; + goto out; + } + + /* + * If the port is already initialised, don't touch it. + */ + if (state->port->type == PORT_UNKNOWN) { + state->port->iobase = port->iobase; + state->port->membase = port->membase; + state->port->irq = port->irq; + state->port->uartclk = port->uartclk; + state->port->fifosize = port->fifosize; + state->port->regshift = port->regshift; + state->port->iotype = port->iotype; + state->port->flags = port->flags; + state->port->line = state - drv->state; + state->port->mapbase = port->mapbase; + + uart_configure_port(drv, state, state->port); + } + + ret = state->port->line; + } else + ret = -ENOSPC; + out: + up(&port_sem); + return ret; +} + +/** + * uart_unregister_port - de-allocate a port + * @drv: pointer to the uart low level driver structure for this port + * @line: line index previously returned from uart_register_port() + * + * Hang up the specified line associated with the low level driver, + * and mark the port as unused. + */ +void uart_unregister_port(struct uart_driver *drv, int line) +{ + struct uart_state *state; + + if (line < 0 || line >= drv->nr) { + printk(KERN_ERR "Attempt to unregister "); + printk("%s%d", drv->dev_name, line); + printk("\n"); + return; + } + + state = drv->state + line; + + down(&port_sem); + uart_unconfigure_port(drv, state); + up(&port_sem); +} + +EXPORT_SYMBOL(uart_write_wakeup); +EXPORT_SYMBOL(uart_register_driver); +EXPORT_SYMBOL(uart_unregister_driver); +EXPORT_SYMBOL(uart_suspend_port); +EXPORT_SYMBOL(uart_resume_port); +EXPORT_SYMBOL(uart_register_port); +EXPORT_SYMBOL(uart_unregister_port); +EXPORT_SYMBOL(uart_add_one_port); +EXPORT_SYMBOL(uart_remove_one_port); + +MODULE_DESCRIPTION("Serial driver core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c new file mode 100644 index 000000000000..9034f9ad37c7 --- /dev/null +++ b/drivers/serial/serial_cs.c @@ -0,0 +1,747 @@ +/*====================================================================== + + A driver for PCMCIA serial devices + + serial_cs.c 1.134 2002/05/04 05:48:53 + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is David A. Hinds + . Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU General Public License version 2 (the "GPL"), in which + case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "8250.h" + +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0644); +#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) +static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)"; +#else +#define DEBUG(n, args...) +#endif + +/*====================================================================*/ + +/* Parameters that can be set with 'insmod' */ + +/* Enable the speaker? */ +static int do_sound = 1; +/* Skip strict UART tests? */ +static int buggy_uart; + +module_param(do_sound, int, 0444); +module_param(buggy_uart, int, 0444); + +/*====================================================================*/ + +/* Table of multi-port card ID's */ + +struct multi_id { + u_short manfid; + u_short prodid; + int multi; /* 1 = multifunction, > 1 = # ports */ +}; + +static struct multi_id multi_id[] = { + { MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 }, + { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 }, + { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 }, + { MANFID_QUATECH, PRODID_QUATECH_QUAD_RS232, 4 }, + { MANFID_SOCKET, PRODID_SOCKET_DUAL_RS232, 2 }, + { MANFID_INTEL, PRODID_INTEL_DUAL_RS232, 2 }, + { MANFID_NATINST, PRODID_NATINST_QUAD_RS232, 4 } +}; +#define MULTI_COUNT (sizeof(multi_id)/sizeof(struct multi_id)) + +struct serial_info { + dev_link_t link; + int ndev; + int multi; + int slave; + int manfid; + dev_node_t node[4]; + int line[4]; +}; + +static void serial_config(dev_link_t * link); +static int serial_event(event_t event, int priority, + event_callback_args_t * args); + +static dev_info_t dev_info = "serial_cs"; + +static dev_link_t *serial_attach(void); +static void serial_detach(dev_link_t *); + +static dev_link_t *dev_list = NULL; + +/*====================================================================== + + After a card is removed, serial_remove() will unregister + the serial device(s), and release the PCMCIA configuration. + +======================================================================*/ + +static void serial_remove(dev_link_t *link) +{ + struct serial_info *info = link->priv; + int i; + + link->state &= ~DEV_PRESENT; + + DEBUG(0, "serial_release(0x%p)\n", link); + + /* + * Recheck to see if the device is still configured. + */ + if (info->link.state & DEV_CONFIG) { + for (i = 0; i < info->ndev; i++) + serial8250_unregister_port(info->line[i]); + + info->link.dev = NULL; + + if (!info->slave) { + pcmcia_release_configuration(info->link.handle); + pcmcia_release_io(info->link.handle, &info->link.io); + pcmcia_release_irq(info->link.handle, &info->link.irq); + } + + info->link.state &= ~DEV_CONFIG; + } +} + +static void serial_suspend(dev_link_t *link) +{ + link->state |= DEV_SUSPEND; + + if (link->state & DEV_CONFIG) { + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_suspend_port(info->line[i]); + + if (!info->slave) + pcmcia_release_configuration(link->handle); + } +} + +static void serial_resume(dev_link_t *link) +{ + link->state &= ~DEV_SUSPEND; + + if (DEV_OK(link)) { + struct serial_info *info = link->priv; + int i; + + if (!info->slave) + pcmcia_request_configuration(link->handle, &link->conf); + + for (i = 0; i < info->ndev; i++) + serial8250_resume_port(info->line[i]); + } +} + +/*====================================================================== + + serial_attach() creates an "instance" of the driver, allocating + local data structures for one device. The device is registered + with Card Services. + +======================================================================*/ + +static dev_link_t *serial_attach(void) +{ + struct serial_info *info; + client_reg_t client_reg; + dev_link_t *link; + int ret; + + DEBUG(0, "serial_attach()\n"); + + /* Create new serial device */ + info = kmalloc(sizeof (*info), GFP_KERNEL); + if (!info) + return NULL; + memset(info, 0, sizeof (*info)); + link = &info->link; + link->priv = info; + + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.NumPorts1 = 8; + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->conf.Attributes = CONF_ENABLE_IRQ; + if (do_sound) { + link->conf.Attributes |= CONF_ENABLE_SPKR; + link->conf.Status = CCSR_AUDIO_ENA; + } + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &serial_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != CS_SUCCESS) { + cs_error(link->handle, RegisterClient, ret); + serial_detach(link); + return NULL; + } + + return link; +} + +/*====================================================================== + + This deletes a driver "instance". The device is de-registered + with Card Services. If it has been released, all local data + structures are freed. Otherwise, the structures will be freed + when the device is released. + +======================================================================*/ + +static void serial_detach(dev_link_t * link) +{ + struct serial_info *info = link->priv; + dev_link_t **linkp; + int ret; + + DEBUG(0, "serial_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) + break; + if (*linkp == NULL) + return; + + /* + * Ensure any outstanding scheduled tasks are completed. + */ + flush_scheduled_work(); + + /* + * Ensure that the ports have been released. + */ + serial_remove(link); + + if (link->handle) { + ret = pcmcia_deregister_client(link->handle); + if (ret != CS_SUCCESS) + cs_error(link->handle, DeregisterClient, ret); + } + + /* Unlink device structure, free bits */ + *linkp = link->next; + kfree(info); +} + +/*====================================================================*/ + +static int setup_serial(client_handle_t handle, struct serial_info * info, + kio_addr_t iobase, int irq) +{ + struct uart_port port; + int line; + + memset(&port, 0, sizeof (struct uart_port)); + port.iobase = iobase; + port.irq = irq; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + port.uartclk = 1843200; + port.dev = &handle_to_dev(handle); + if (buggy_uart) + port.flags |= UPF_BUGGY_UART; + line = serial8250_register_port(&port); + if (line < 0) { + printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " + "0x%04lx, irq %d failed\n", (u_long)iobase, irq); + return -EINVAL; + } + + info->line[info->ndev] = line; + sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); + info->node[info->ndev].major = TTY_MAJOR; + info->node[info->ndev].minor = 0x40 + line; + if (info->ndev > 0) + info->node[info->ndev - 1].next = &info->node[info->ndev]; + info->ndev++; + + return 0; +} + +/*====================================================================*/ + +static int +first_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse) +{ + int i; + i = pcmcia_get_first_tuple(handle, tuple); + if (i != CS_SUCCESS) + return CS_NO_MORE_ITEMS; + i = pcmcia_get_tuple_data(handle, tuple); + if (i != CS_SUCCESS) + return i; + return pcmcia_parse_tuple(handle, tuple, parse); +} + +static int +next_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse) +{ + int i; + i = pcmcia_get_next_tuple(handle, tuple); + if (i != CS_SUCCESS) + return CS_NO_MORE_ITEMS; + i = pcmcia_get_tuple_data(handle, tuple); + if (i != CS_SUCCESS) + return i; + return pcmcia_parse_tuple(handle, tuple, parse); +} + +/*====================================================================*/ + +static int simple_config(dev_link_t *link) +{ + static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + static int size_table[2] = { 8, 16 }; + client_handle_t handle = link->handle; + struct serial_info *info = link->priv; + tuple_t tuple; + u_char buf[256]; + cisparse_t parse; + cistpl_cftable_entry_t *cf = &parse.cftable_entry; + config_info_t config; + int i, j, try; + int s; + + /* If the card is already configured, look up the port and irq */ + i = pcmcia_get_configuration_info(handle, &config); + if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) { + kio_addr_t port = 0; + if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) { + port = config.BasePort2; + info->slave = 1; + } else if ((info->manfid == MANFID_OSITECH) && + (config.NumPorts1 == 0x40)) { + port = config.BasePort1 + 0x28; + info->slave = 1; + } + if (info->slave) + return setup_serial(handle, info, port, config.AssignedIRQ); + } + link->conf.Vcc = config.Vcc; + + /* First pass: look for a config entry that looks normal. */ + tuple.TupleData = (cisdata_t *) buf; + tuple.TupleOffset = 0; + tuple.TupleDataMax = 255; + tuple.Attributes = 0; + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + /* Two tries: without IO aliases, then with aliases */ + for (s = 0; s < 2; s++) { + for (try = 0; try < 2; try++) { + i = first_tuple(handle, &tuple, &parse); + while (i != CS_NO_MORE_ITEMS) { + if (i != CS_SUCCESS) + goto next_entry; + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && + (cf->io.win[0].base != 0)) { + link->conf.ConfigIndex = cf->index; + link->io.BasePort1 = cf->io.win[0].base; + link->io.IOAddrLines = (try == 0) ? + 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + i = pcmcia_request_io(link->handle, &link->io); + if (i == CS_SUCCESS) + goto found_port; + } +next_entry: + i = next_tuple(handle, &tuple, &parse); + } + } + } + /* Second pass: try to find an entry that isn't picky about + its base address, then try to grab any standard serial port + address, and finally try to get any free port. */ + i = first_tuple(handle, &tuple, &parse); + while (i != CS_NO_MORE_ITEMS) { + if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && + ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { + link->conf.ConfigIndex = cf->index; + for (j = 0; j < 5; j++) { + link->io.BasePort1 = base[j]; + link->io.IOAddrLines = base[j] ? 16 : 3; + i = pcmcia_request_io(link->handle, &link->io); + if (i == CS_SUCCESS) + goto found_port; + } + } + i = next_tuple(handle, &tuple, &parse); + } + + found_port: + if (i != CS_SUCCESS) { + printk(KERN_NOTICE + "serial_cs: no usable port range found, giving up\n"); + cs_error(link->handle, RequestIO, i); + return -1; + } + + i = pcmcia_request_irq(link->handle, &link->irq); + if (i != CS_SUCCESS) { + cs_error(link->handle, RequestIRQ, i); + link->irq.AssignedIRQ = 0; + } + if (info->multi && (info->manfid == MANFID_3COM)) + link->conf.ConfigIndex &= ~(0x08); + i = pcmcia_request_configuration(link->handle, &link->conf); + if (i != CS_SUCCESS) { + cs_error(link->handle, RequestConfiguration, i); + return -1; + } + + return setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ); +} + +static int multi_config(dev_link_t * link) +{ + client_handle_t handle = link->handle; + struct serial_info *info = link->priv; + tuple_t tuple; + u_char buf[256]; + cisparse_t parse; + cistpl_cftable_entry_t *cf = &parse.cftable_entry; + config_info_t config; + int i, base2 = 0; + + i = pcmcia_get_configuration_info(handle, &config); + if (i != CS_SUCCESS) { + cs_error(handle, GetConfigurationInfo, i); + return -1; + } + link->conf.Vcc = config.Vcc; + + tuple.TupleData = (cisdata_t *) buf; + tuple.TupleOffset = 0; + tuple.TupleDataMax = 255; + tuple.Attributes = 0; + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + + /* First, look for a generic full-sized window */ + link->io.NumPorts1 = info->multi * 8; + i = first_tuple(handle, &tuple, &parse); + while (i != CS_NO_MORE_ITEMS) { + /* The quad port cards have bad CIS's, so just look for a + window larger than 8 ports and assume it will be right */ + if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && + (cf->io.win[0].len > 8)) { + link->conf.ConfigIndex = cf->index; + link->io.BasePort1 = cf->io.win[0].base; + link->io.IOAddrLines = + cf->io.flags & CISTPL_IO_LINES_MASK; + i = pcmcia_request_io(link->handle, &link->io); + base2 = link->io.BasePort1 + 8; + if (i == CS_SUCCESS) + break; + } + i = next_tuple(handle, &tuple, &parse); + } + + /* If that didn't work, look for two windows */ + if (i != CS_SUCCESS) { + link->io.NumPorts1 = link->io.NumPorts2 = 8; + info->multi = 2; + i = first_tuple(handle, &tuple, &parse); + while (i != CS_NO_MORE_ITEMS) { + if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) { + link->conf.ConfigIndex = cf->index; + link->io.BasePort1 = cf->io.win[0].base; + link->io.BasePort2 = cf->io.win[1].base; + link->io.IOAddrLines = + cf->io.flags & CISTPL_IO_LINES_MASK; + i = pcmcia_request_io(link->handle, &link->io); + base2 = link->io.BasePort2; + if (i == CS_SUCCESS) + break; + } + i = next_tuple(handle, &tuple, &parse); + } + } + + if (i != CS_SUCCESS) { + cs_error(link->handle, RequestIO, i); + return -1; + } + + i = pcmcia_request_irq(link->handle, &link->irq); + if (i != CS_SUCCESS) { + printk(KERN_NOTICE + "serial_cs: no usable port range found, giving up\n"); + cs_error(link->handle, RequestIRQ, i); + link->irq.AssignedIRQ = 0; + } + /* Socket Dual IO: this enables irq's for second port */ + if (info->multi && (info->manfid == MANFID_SOCKET)) { + link->conf.Present |= PRESENT_EXT_STATUS; + link->conf.ExtStatus = ESR_REQ_ATTN_ENA; + } + i = pcmcia_request_configuration(link->handle, &link->conf); + if (i != CS_SUCCESS) { + cs_error(link->handle, RequestConfiguration, i); + return -1; + } + + /* The Oxford Semiconductor OXCF950 cards are in fact single-port: + 8 registers are for the UART, the others are extra registers */ + if (info->manfid == MANFID_OXSEMI) { + if (cf->index == 1 || cf->index == 3) { + setup_serial(handle, info, base2, link->irq.AssignedIRQ); + outb(12, link->io.BasePort1 + 1); + } else { + setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ); + outb(12, base2 + 1); + } + return 0; + } + + setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ); + /* The Nokia cards are not really multiport cards */ + if (info->manfid == MANFID_NOKIA) + return 0; + for (i = 0; i < info->multi - 1; i++) + setup_serial(handle, info, base2 + (8 * i), link->irq.AssignedIRQ); + + return 0; +} + +/*====================================================================== + + serial_config() is scheduled to run after a CARD_INSERTION event + is received, to configure the PCMCIA socket, and to make the + serial device available to the system. + +======================================================================*/ + +void serial_config(dev_link_t * link) +{ + client_handle_t handle = link->handle; + struct serial_info *info = link->priv; + tuple_t tuple; + u_short buf[128]; + cisparse_t parse; + cistpl_cftable_entry_t *cf = &parse.cftable_entry; + int i, last_ret, last_fn; + + DEBUG(0, "serial_config(0x%p)\n", link); + + tuple.TupleData = (cisdata_t *) buf; + tuple.TupleOffset = 0; + tuple.TupleDataMax = 255; + tuple.Attributes = 0; + /* Get configuration register information */ + tuple.DesiredTuple = CISTPL_CONFIG; + last_ret = first_tuple(handle, &tuple, &parse); + if (last_ret != CS_SUCCESS) { + last_fn = ParseTuple; + goto cs_failed; + } + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Is this a compliant multifunction card? */ + tuple.DesiredTuple = CISTPL_LONGLINK_MFC; + tuple.Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK; + info->multi = (first_tuple(handle, &tuple, &parse) == CS_SUCCESS); + + /* Is this a multiport card? */ + tuple.DesiredTuple = CISTPL_MANFID; + if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) { + info->manfid = le16_to_cpu(buf[0]); + for (i = 0; i < MULTI_COUNT; i++) + if ((info->manfid == multi_id[i].manfid) && + (le16_to_cpu(buf[1]) == multi_id[i].prodid)) + break; + if (i < MULTI_COUNT) + info->multi = multi_id[i].multi; + } + + /* Another check for dual-serial cards: look for either serial or + multifunction cards that ask for appropriate IO port ranges */ + tuple.DesiredTuple = CISTPL_FUNCID; + if ((info->multi == 0) && + ((first_tuple(handle, &tuple, &parse) != CS_SUCCESS) || + (parse.funcid.func == CISTPL_FUNCID_MULTI) || + (parse.funcid.func == CISTPL_FUNCID_SERIAL))) { + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) { + if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) + info->multi = cf->io.win[0].len >> 3; + if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && + (cf->io.win[1].len == 8)) + info->multi = 2; + } + } + + if (info->multi > 1) + multi_config(link); + else + simple_config(link); + + if (info->ndev == 0) + goto failed; + + if (info->manfid == MANFID_IBM) { + conf_reg_t reg = { 0, CS_READ, 0x800, 0 }; + last_ret = pcmcia_access_configuration_register(link->handle, ®); + if (last_ret) { + last_fn = AccessConfigurationRegister; + goto cs_failed; + } + reg.Action = CS_WRITE; + reg.Value = reg.Value | 1; + last_ret = pcmcia_access_configuration_register(link->handle, ®); + if (last_ret) { + last_fn = AccessConfigurationRegister; + goto cs_failed; + } + } + + link->dev = &info->node[0]; + link->state &= ~DEV_CONFIG_PENDING; + return; + + cs_failed: + cs_error(link->handle, last_fn, last_ret); + failed: + serial_remove(link); + link->state &= ~DEV_CONFIG_PENDING; +} + +/*====================================================================== + + The card status event handler. Mostly, this schedules other + stuff to run after an event is received. A CARD_REMOVAL event + also sets some flags to discourage the serial drivers from + talking to the ports. + +======================================================================*/ + +static int +serial_event(event_t event, int priority, event_callback_args_t * args) +{ + dev_link_t *link = args->client_data; + struct serial_info *info = link->priv; + + DEBUG(1, "serial_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + serial_remove(link); + break; + + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + serial_config(link); + break; + + case CS_EVENT_PM_SUSPEND: + serial_suspend(link); + break; + + case CS_EVENT_RESET_PHYSICAL: + if ((link->state & DEV_CONFIG) && !info->slave) + pcmcia_release_configuration(link->handle); + break; + + case CS_EVENT_PM_RESUME: + serial_resume(link); + break; + + case CS_EVENT_CARD_RESET: + if (DEV_OK(link) && !info->slave) + pcmcia_request_configuration(link->handle, &link->conf); + break; + } + return 0; +} + +static struct pcmcia_driver serial_cs_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "serial_cs", + }, + .attach = serial_attach, + .detach = serial_detach, +}; + +static int __init init_serial_cs(void) +{ + return pcmcia_register_driver(&serial_cs_driver); +} + +static void __exit exit_serial_cs(void) +{ + pcmcia_unregister_driver(&serial_cs_driver); + BUG_ON(dev_list != NULL); +} + +module_init(init_serial_cs); +module_exit(exit_serial_cs); + +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c new file mode 100644 index 000000000000..4ce3a41f1611 --- /dev/null +++ b/drivers/serial/serial_lh7a40x.c @@ -0,0 +1,711 @@ +/* drivers/serial/serial_lh7a40x.c + * + * Copyright (C) 2004 Coastal Environmental Systems + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + */ + +/* Driver for Sharp LH7A40X embedded serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd. + * + * --- + * + * This driver supports the embedded UARTs of the Sharp LH7A40X series + * CPUs. While similar to the 16550 and other UART chips, there is + * nothing close to register compatibility. Moreover, some of the + * modem control lines are not available, either in the chip or they + * are lacking in the board-level implementation. + * + * - Use of SIRDIS + * For simplicity, we disable the IR functions of any UART whenever + * we enable it. + * + */ + +#include + +#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DEV_MAJOR 204 +#define DEV_MINOR 16 +#define DEV_NR 3 + +#define ISR_LOOP_LIMIT 256 + +#define UR(p,o) _UR ((p)->membase, o) +#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o)))) +#define BIT_CLR(p,o,m) UR(p,o) = UR(p,o) & (~(unsigned int)m) +#define BIT_SET(p,o,m) UR(p,o) = UR(p,o) | ( (unsigned int)m) + +#define UART_REG_SIZE 32 + +#define UART_R_DATA (0x00) +#define UART_R_FCON (0x04) +#define UART_R_BRCON (0x08) +#define UART_R_CON (0x0c) +#define UART_R_STATUS (0x10) +#define UART_R_RAWISR (0x14) +#define UART_R_INTEN (0x18) +#define UART_R_ISR (0x1c) + +#define UARTEN (0x01) /* UART enable */ +#define SIRDIS (0x02) /* Serial IR disable (UART1 only) */ + +#define RxEmpty (0x10) +#define TxEmpty (0x80) +#define TxFull (0x20) +#define nRxRdy RxEmpty +#define nTxRdy TxFull +#define TxBusy (0x08) + +#define RxBreak (0x0800) +#define RxOverrunError (0x0400) +#define RxParityError (0x0200) +#define RxFramingError (0x0100) +#define RxError (RxBreak | RxOverrunError | RxParityError | RxFramingError) + +#define DCD (0x04) +#define DSR (0x02) +#define CTS (0x01) + +#define RxInt (0x01) +#define TxInt (0x02) +#define ModemInt (0x04) +#define RxTimeoutInt (0x08) + +#define MSEOI (0x10) + +#define WLEN_8 (0x60) +#define WLEN_7 (0x40) +#define WLEN_6 (0x20) +#define WLEN_5 (0x00) +#define WLEN (0x60) /* Mask for all word-length bits */ +#define STP2 (0x08) +#define PEN (0x02) /* Parity Enable */ +#define EPS (0x04) /* Even Parity Set */ +#define FEN (0x10) /* FIFO Enable */ +#define BRK (0x01) /* Send Break */ + + +struct uart_port_lh7a40x { + struct uart_port port; + unsigned int statusPrev; /* Most recently read modem status */ +}; + +static void lh7a40xuart_stop_tx (struct uart_port* port, unsigned int tty_stop) +{ + BIT_CLR (port, UART_R_INTEN, TxInt); +} + +static void lh7a40xuart_start_tx (struct uart_port* port, + unsigned int tty_start) +{ + BIT_SET (port, UART_R_INTEN, TxInt); + + /* *** FIXME: do I need to check for startup of the + transmitter? The old driver did, but AMBA + doesn't . */ +} + +static void lh7a40xuart_stop_rx (struct uart_port* port) +{ + BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); +} + +static void lh7a40xuart_enable_ms (struct uart_port* port) +{ + BIT_SET (port, UART_R_INTEN, ModemInt); +} + +static void +#ifdef SUPPORT_SYSRQ +lh7a40xuart_rx_chars (struct uart_port* port, struct pt_regs* regs) +#else +lh7a40xuart_rx_chars (struct uart_port* port) +#endif +{ + struct tty_struct* tty = port->info->tty; + int cbRxMax = 256; /* (Gross) limit on receive */ + unsigned int data, flag;/* Received data and status */ + + while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + /* + * If this failed then we will throw away the + * bytes but must do so to clear interrupts + */ + } + + data = UR (port, UART_R_DATA); + flag = TTY_NORMAL; + ++port->icount.rx; + + if (data & RxError) { /* Quick check, short-circuit */ + if (data & RxBreak) { + data &= ~(RxFramingError | RxParityError); + ++port->icount.brk; + if (uart_handle_break (port)) + continue; + } + else if (data & RxParityError) + ++port->icount.parity; + else if (data & RxFramingError) + ++port->icount.frame; + if (data & RxOverrunError) + ++port->icount.overrun; + + /* Mask by termios, leave Rx'd byte */ + data &= port->read_status_mask | 0xff; + + if (data & RxBreak) + flag = TTY_BREAK; + else if (data & RxParityError) + flag = TTY_PARITY; + else if (data & RxFramingError) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char (port, (unsigned char) data, regs)) + continue; + + if ((data & port->ignore_status_mask) == 0) { + tty_insert_flip_char(tty, data, flag); + } + if ((data & RxOverrunError) + && tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + } + tty_flip_buffer_push (tty); + return; +} + +static void lh7a40xuart_tx_chars (struct uart_port* port) +{ + struct circ_buf* xmit = &port->info->xmit; + int cbTxMax = port->fifosize; + + if (port->x_char) { + UR (port, UART_R_DATA) = port->x_char; + ++port->icount.tx; + port->x_char = 0; + return; + } + if (uart_circ_empty (xmit) || uart_tx_stopped (port)) { + lh7a40xuart_stop_tx (port, 0); + return; + } + + /* Unlike the AMBA UART, the lh7a40x UART does not guarantee + that at least half of the FIFO is empty. Instead, we check + status for every character. Using the AMBA method causes + the transmitter to drop characters. */ + + do { + UR (port, UART_R_DATA) = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + ++port->icount.tx; + if (uart_circ_empty(xmit)) + break; + } while (!(UR (port, UART_R_STATUS) & nTxRdy) + && cbTxMax--); + + if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS) + uart_write_wakeup (port); + + if (uart_circ_empty (xmit)) + lh7a40xuart_stop_tx (port, 0); +} + +static void lh7a40xuart_modem_status (struct uart_port* port) +{ + unsigned int status = UR (port, UART_R_STATUS); + unsigned int delta + = status ^ ((struct uart_port_lh7a40x*) port)->statusPrev; + + BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */ + + if (!delta) /* Only happens if we missed 2 transitions */ + return; + + ((struct uart_port_lh7a40x*) port)->statusPrev = status; + + if (delta & DCD) + uart_handle_dcd_change (port, status & DCD); + + if (delta & DSR) + ++port->icount.dsr; + + if (delta & CTS) + uart_handle_cts_change (port, status & CTS); + + wake_up_interruptible (&port->info->delta_msr_wait); +} + +static irqreturn_t lh7a40xuart_int (int irq, void* dev_id, + struct pt_regs* regs) +{ + struct uart_port* port = dev_id; + unsigned int cLoopLimit = ISR_LOOP_LIMIT; + unsigned int isr = UR (port, UART_R_ISR); + + + do { + if (isr & (RxInt | RxTimeoutInt)) +#ifdef SUPPORT_SYSRQ + lh7a40xuart_rx_chars(port, regs); +#else + lh7a40xuart_rx_chars(port); +#endif + if (isr & ModemInt) + lh7a40xuart_modem_status (port); + if (isr & TxInt) + lh7a40xuart_tx_chars (port); + + if (--cLoopLimit == 0) + break; + + isr = UR (port, UART_R_ISR); + } while (isr & (RxInt | TxInt | RxTimeoutInt)); + + return IRQ_HANDLED; +} + +static unsigned int lh7a40xuart_tx_empty (struct uart_port* port) +{ + return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0; +} + +static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port) +{ + unsigned int result = 0; + unsigned int status = UR (port, UART_R_STATUS); + + if (status & DCD) + result |= TIOCM_CAR; + if (status & DSR) + result |= TIOCM_DSR; + if (status & CTS) + result |= TIOCM_CTS; + + return result; +} + +static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl) +{ + /* None of the ports supports DTR. UART1 supports RTS through GPIO. */ + /* Note, kernel appears to be setting DTR and RTS on console. */ + + /* *** FIXME: this deserves more work. There's some work in + tracing all of the IO pins. */ +#if 0 + if( port->mapbase == UART1_PHYS) { + gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS); + + if (mctrl & TIOCM_RTS) + gpio->pbdr &= ~GPIOB_UART1_RTS; + else + gpio->pbdr |= GPIOB_UART1_RTS; + } +#endif +} + +static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + BIT_SET (port, UART_R_FCON, BRK); /* Assert break */ + else + BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */ + spin_unlock_irqrestore(&port->lock, flags); +} + +static int lh7a40xuart_startup (struct uart_port* port) +{ + int retval; + + retval = request_irq (port->irq, lh7a40xuart_int, 0, + "serial_lh7a40x", port); + if (retval) + return retval; + + /* Initial modem control-line settings */ + ((struct uart_port_lh7a40x*) port)->statusPrev + = UR (port, UART_R_STATUS); + + /* There is presently no configuration option to enable IR. + Thus, we always disable it. */ + + BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); + BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt); + + return 0; +} + +static void lh7a40xuart_shutdown (struct uart_port* port) +{ + free_irq (port->irq, port); + BIT_CLR (port, UART_R_FCON, BRK | FEN); + BIT_CLR (port, UART_R_CON, UARTEN); +} + +static void lh7a40xuart_set_termios (struct uart_port* port, + struct termios* termios, + struct termios* old) +{ + unsigned int con; + unsigned int inten; + unsigned int fcon; + unsigned long flags; + unsigned int baud; + unsigned int quot; + + baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16); + quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */ + + switch (termios->c_cflag & CSIZE) { + case CS5: + fcon = WLEN_5; + break; + case CS6: + fcon = WLEN_6; + break; + case CS7: + fcon = WLEN_7; + break; + case CS8: + default: + fcon = WLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + fcon |= STP2; + if (termios->c_cflag & PARENB) { + fcon |= PEN; + if (!(termios->c_cflag & PARODD)) + fcon |= EPS; + } + if (port->fifosize > 1) + fcon |= FEN; + + spin_lock_irqsave (&port->lock, flags); + + uart_update_timeout (port, termios->c_cflag, baud); + + port->read_status_mask = RxOverrunError; + if (termios->c_iflag & INPCK) + port->read_status_mask |= RxFramingError | RxParityError; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= RxBreak; + + /* Figure mask for status we ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RxFramingError | RxParityError; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= RxBreak; + /* Ignore overrun when ignorning parity */ + /* *** FIXME: is this in the right place? */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= RxOverrunError; + } + + /* Ignore all receive errors when receive disabled */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= RxError; + + con = UR (port, UART_R_CON); + inten = (UR (port, UART_R_INTEN) & ~ModemInt); + + if (UART_ENABLE_MS (port, termios->c_cflag)) + inten |= ModemInt; + + BIT_CLR (port, UART_R_CON, UARTEN); /* Disable UART */ + UR (port, UART_R_INTEN) = 0; /* Disable interrupts */ + UR (port, UART_R_BRCON) = quot - 1; /* Set baud rate divisor */ + UR (port, UART_R_FCON) = fcon; /* Set FIFO and frame ctrl */ + UR (port, UART_R_INTEN) = inten; /* Enable interrupts */ + UR (port, UART_R_CON) = con; /* Restore UART mode */ + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char* lh7a40xuart_type (struct uart_port* port) +{ + return port->type == PORT_LH7A40X ? "LH7A40X" : NULL; +} + +static void lh7a40xuart_release_port (struct uart_port* port) +{ + release_mem_region (port->mapbase, UART_REG_SIZE); +} + +static int lh7a40xuart_request_port (struct uart_port* port) +{ + return request_mem_region (port->mapbase, UART_REG_SIZE, + "serial_lh7a40x") != NULL + ? 0 : -EBUSY; +} + +static void lh7a40xuart_config_port (struct uart_port* port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_LH7A40X; + lh7a40xuart_request_port (port); + } +} + +static int lh7a40xuart_verify_port (struct uart_port* port, + struct serial_struct* ser) +{ + int ret = 0; + + if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) /* *** FIXME: is this true? */ + ret = -EINVAL; + return ret; +} + +static struct uart_ops lh7a40x_uart_ops = { + .tx_empty = lh7a40xuart_tx_empty, + .set_mctrl = lh7a40xuart_set_mctrl, + .get_mctrl = lh7a40xuart_get_mctrl, + .stop_tx = lh7a40xuart_stop_tx, + .start_tx = lh7a40xuart_start_tx, + .stop_rx = lh7a40xuart_stop_rx, + .enable_ms = lh7a40xuart_enable_ms, + .break_ctl = lh7a40xuart_break_ctl, + .startup = lh7a40xuart_startup, + .shutdown = lh7a40xuart_shutdown, + .set_termios = lh7a40xuart_set_termios, + .type = lh7a40xuart_type, + .release_port = lh7a40xuart_release_port, + .request_port = lh7a40xuart_request_port, + .config_port = lh7a40xuart_config_port, + .verify_port = lh7a40xuart_verify_port, +}; + +static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = { + { + .port = { + .membase = (void*) io_p2v (UART1_PHYS), + .mapbase = UART1_PHYS, + .iotype = SERIAL_IO_MEM, + .irq = IRQ_UART1INTR, + .uartclk = 14745600/2, + .fifosize = 16, + .ops = &lh7a40x_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + }, + { + .port = { + .membase = (void*) io_p2v (UART2_PHYS), + .mapbase = UART2_PHYS, + .iotype = SERIAL_IO_MEM, + .irq = IRQ_UART2INTR, + .uartclk = 14745600/2, + .fifosize = 16, + .ops = &lh7a40x_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + }, + { + .port = { + .membase = (void*) io_p2v (UART3_PHYS), + .mapbase = UART3_PHYS, + .iotype = SERIAL_IO_MEM, + .irq = IRQ_UART3INTR, + .uartclk = 14745600/2, + .fifosize = 16, + .ops = &lh7a40x_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 2, + }, + }, +}; + +#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE +# define LH7A40X_CONSOLE NULL +#else +# define LH7A40X_CONSOLE &lh7a40x_console + + +static void lh7a40xuart_console_write (struct console* co, + const char* s, + unsigned int count) +{ + struct uart_port* port = &lh7a40x_ports[co->index].port; + unsigned int con = UR (port, UART_R_CON); + unsigned int inten = UR (port, UART_R_INTEN); + + + UR (port, UART_R_INTEN) = 0; /* Disable all interrupts */ + BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */ + + for (; count-- > 0; ++s) { + while (UR (port, UART_R_STATUS) & nTxRdy) + ; + UR (port, UART_R_DATA) = *s; + if (*s == '\n') { + while ((UR (port, UART_R_STATUS) & TxBusy)) + ; + UR (port, UART_R_DATA) = '\r'; + } + } + + /* Wait until all characters are sent */ + while (UR (port, UART_R_STATUS) & TxBusy) + ; + + /* Restore control and interrupt mask */ + UR (port, UART_R_CON) = con; + UR (port, UART_R_INTEN) = inten; +} + +static void __init lh7a40xuart_console_get_options (struct uart_port* port, + int* baud, + int* parity, + int* bits) +{ + if (UR (port, UART_R_CON) & UARTEN) { + unsigned int fcon = UR (port, UART_R_FCON); + unsigned int quot = UR (port, UART_R_BRCON) + 1; + + switch (fcon & (PEN | EPS)) { + default: *parity = 'n'; break; + case PEN: *parity = 'o'; break; + case PEN | EPS: *parity = 'e'; break; + } + + switch (fcon & WLEN) { + default: + case WLEN_8: *bits = 8; break; + case WLEN_7: *bits = 7; break; + case WLEN_6: *bits = 6; break; + case WLEN_5: *bits = 5; break; + } + + *baud = port->uartclk/(16*quot); + } +} + +static int __init lh7a40xuart_console_setup (struct console* co, char* options) +{ + struct uart_port* port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= DEV_NR) /* Bounds check on device number */ + co->index = 0; + port = &lh7a40x_ports[co->index].port; + + if (options) + uart_parse_options (options, &baud, &parity, &bits, &flow); + else + lh7a40xuart_console_get_options (port, &baud, &parity, &bits); + + return uart_set_options (port, co, baud, parity, bits, flow); +} + +extern struct uart_driver lh7a40x_reg; +static struct console lh7a40x_console = { + .name = "ttyAM", + .write = lh7a40xuart_console_write, + .device = uart_console_device, + .setup = lh7a40xuart_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &lh7a40x_reg, +}; + +static int __init lh7a40xuart_console_init(void) +{ + register_console (&lh7a40x_console); + return 0; +} + +console_initcall (lh7a40xuart_console_init); + +#endif + +static struct uart_driver lh7a40x_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyAM", + .dev_name = "ttyAM", + .major = DEV_MAJOR, + .minor = DEV_MINOR, + .nr = DEV_NR, + .cons = LH7A40X_CONSOLE, +}; + +static int __init lh7a40xuart_init(void) +{ + int ret; + + printk (KERN_INFO "serial: LH7A40X serial driver\n"); + + ret = uart_register_driver (&lh7a40x_reg); + + if (ret == 0) { + int i; + + for (i = 0; i < DEV_NR; i++) + uart_add_one_port (&lh7a40x_reg, + &lh7a40x_ports[i].port); + } + return ret; +} + +static void __exit lh7a40xuart_exit(void) +{ + int i; + + for (i = 0; i < DEV_NR; i++) + uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port); + + uart_unregister_driver (&lh7a40x_reg); +} + +module_init (lh7a40xuart_init); +module_exit (lh7a40xuart_exit); + +MODULE_AUTHOR ("Marc Singer"); +MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver"); +MODULE_LICENSE ("GPL"); diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c new file mode 100644 index 000000000000..dfc987301f17 --- /dev/null +++ b/drivers/serial/serial_txx9.c @@ -0,0 +1,1171 @@ +/* + * drivers/serial/serial_txx9.c + * + * Derived from many drivers using generic_serial interface, + * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c + * (was in Linux/VR tree) by Jim Pick. + * + * Copyright (C) 1999 Harald Koerfgen + * Copyright (C) 2000 Jim Pick + * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com) + * Copyright (C) 2000-2002 Toshiba Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller + * + * Revision History: + * 0.30 Initial revision. (Renamed from serial_txx927.c) + * 0.31 Use save_flags instead of local_irq_save. + * 0.32 Support SCLK. + * 0.33 Switch TXX9_TTY_NAME by CONFIG_SERIAL_TXX9_STDSERIAL. + * Support TIOCSERGETLSR. + * 0.34 Support slow baudrate. + * 0.40 Merge codes from mainstream kernel (2.4.22). + * 0.41 Fix console checking in rs_shutdown_port(). + * Disable flow-control in serial_console_write(). + * 0.42 Fix minor compiler warning. + * 1.00 Kernel 2.6. Converted to new serial core (based on 8250.c). + * 1.01 Set fifosize to make tx_empry called properly. + * Use standard uart_get_divisor. + * 1.02 Cleanup. (import 8250.c changes) + */ +#include + +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static char *serial_version = "1.02"; +static char *serial_name = "TX39/49 Serial driver"; + +#define PASS_LIMIT 256 + +#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL) +/* "ttyS" is used for standard serial driver */ +#define TXX9_TTY_NAME "ttyTX" +#define TXX9_TTY_DEVFS_NAME "tttx/" +#define TXX9_TTY_MINOR_START (64 + 64) /* ttyTX0(128), ttyTX1(129) */ +#else +/* acts like standard serial driver */ +#define TXX9_TTY_NAME "ttyS" +#define TXX9_TTY_DEVFS_NAME "tts/" +#define TXX9_TTY_MINOR_START 64 +#endif +#define TXX9_TTY_MAJOR TTY_MAJOR + +/* flag aliases */ +#define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART +#define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER + +#ifdef CONFIG_PCI +/* support for Toshiba TC86C001 SIO */ +#define ENABLE_SERIAL_TXX9_PCI +#endif + +/* + * Number of serial ports + */ +#ifdef ENABLE_SERIAL_TXX9_PCI +#define NR_PCI_BOARDS 4 +#define UART_NR (2 + NR_PCI_BOARDS) +#else +#define UART_NR 2 +#endif + +struct uart_txx9_port { + struct uart_port port; + + /* + * We provide a per-port pm hook. + */ + void (*pm)(struct uart_port *port, + unsigned int state, unsigned int old); +}; + +#define TXX9_REGION_SIZE 0x24 + +/* TXX9 Serial Registers */ +#define TXX9_SILCR 0x00 +#define TXX9_SIDICR 0x04 +#define TXX9_SIDISR 0x08 +#define TXX9_SICISR 0x0c +#define TXX9_SIFCR 0x10 +#define TXX9_SIFLCR 0x14 +#define TXX9_SIBGR 0x18 +#define TXX9_SITFIFO 0x1c +#define TXX9_SIRFIFO 0x20 + +/* SILCR : Line Control */ +#define TXX9_SILCR_SCS_MASK 0x00000060 +#define TXX9_SILCR_SCS_IMCLK 0x00000000 +#define TXX9_SILCR_SCS_IMCLK_BG 0x00000020 +#define TXX9_SILCR_SCS_SCLK 0x00000040 +#define TXX9_SILCR_SCS_SCLK_BG 0x00000060 +#define TXX9_SILCR_UEPS 0x00000010 +#define TXX9_SILCR_UPEN 0x00000008 +#define TXX9_SILCR_USBL_MASK 0x00000004 +#define TXX9_SILCR_USBL_1BIT 0x00000000 +#define TXX9_SILCR_USBL_2BIT 0x00000004 +#define TXX9_SILCR_UMODE_MASK 0x00000003 +#define TXX9_SILCR_UMODE_8BIT 0x00000000 +#define TXX9_SILCR_UMODE_7BIT 0x00000001 + +/* SIDICR : DMA/Int. Control */ +#define TXX9_SIDICR_TDE 0x00008000 +#define TXX9_SIDICR_RDE 0x00004000 +#define TXX9_SIDICR_TIE 0x00002000 +#define TXX9_SIDICR_RIE 0x00001000 +#define TXX9_SIDICR_SPIE 0x00000800 +#define TXX9_SIDICR_CTSAC 0x00000600 +#define TXX9_SIDICR_STIE_MASK 0x0000003f +#define TXX9_SIDICR_STIE_OERS 0x00000020 +#define TXX9_SIDICR_STIE_CTSS 0x00000010 +#define TXX9_SIDICR_STIE_RBRKD 0x00000008 +#define TXX9_SIDICR_STIE_TRDY 0x00000004 +#define TXX9_SIDICR_STIE_TXALS 0x00000002 +#define TXX9_SIDICR_STIE_UBRKD 0x00000001 + +/* SIDISR : DMA/Int. Status */ +#define TXX9_SIDISR_UBRK 0x00008000 +#define TXX9_SIDISR_UVALID 0x00004000 +#define TXX9_SIDISR_UFER 0x00002000 +#define TXX9_SIDISR_UPER 0x00001000 +#define TXX9_SIDISR_UOER 0x00000800 +#define TXX9_SIDISR_ERI 0x00000400 +#define TXX9_SIDISR_TOUT 0x00000200 +#define TXX9_SIDISR_TDIS 0x00000100 +#define TXX9_SIDISR_RDIS 0x00000080 +#define TXX9_SIDISR_STIS 0x00000040 +#define TXX9_SIDISR_RFDN_MASK 0x0000001f + +/* SICISR : Change Int. Status */ +#define TXX9_SICISR_OERS 0x00000020 +#define TXX9_SICISR_CTSS 0x00000010 +#define TXX9_SICISR_RBRKD 0x00000008 +#define TXX9_SICISR_TRDY 0x00000004 +#define TXX9_SICISR_TXALS 0x00000002 +#define TXX9_SICISR_UBRKD 0x00000001 + +/* SIFCR : FIFO Control */ +#define TXX9_SIFCR_SWRST 0x00008000 +#define TXX9_SIFCR_RDIL_MASK 0x00000180 +#define TXX9_SIFCR_RDIL_1 0x00000000 +#define TXX9_SIFCR_RDIL_4 0x00000080 +#define TXX9_SIFCR_RDIL_8 0x00000100 +#define TXX9_SIFCR_RDIL_12 0x00000180 +#define TXX9_SIFCR_RDIL_MAX 0x00000180 +#define TXX9_SIFCR_TDIL_MASK 0x00000018 +#define TXX9_SIFCR_TDIL_MASK 0x00000018 +#define TXX9_SIFCR_TDIL_1 0x00000000 +#define TXX9_SIFCR_TDIL_4 0x00000001 +#define TXX9_SIFCR_TDIL_8 0x00000010 +#define TXX9_SIFCR_TDIL_MAX 0x00000010 +#define TXX9_SIFCR_TFRST 0x00000004 +#define TXX9_SIFCR_RFRST 0x00000002 +#define TXX9_SIFCR_FRSTE 0x00000001 +#define TXX9_SIO_TX_FIFO 8 +#define TXX9_SIO_RX_FIFO 16 + +/* SIFLCR : Flow Control */ +#define TXX9_SIFLCR_RCS 0x00001000 +#define TXX9_SIFLCR_TES 0x00000800 +#define TXX9_SIFLCR_RTSSC 0x00000200 +#define TXX9_SIFLCR_RSDE 0x00000100 +#define TXX9_SIFLCR_TSDE 0x00000080 +#define TXX9_SIFLCR_RTSTL_MASK 0x0000001e +#define TXX9_SIFLCR_RTSTL_MAX 0x0000001e +#define TXX9_SIFLCR_TBRK 0x00000001 + +/* SIBGR : Baudrate Control */ +#define TXX9_SIBGR_BCLK_MASK 0x00000300 +#define TXX9_SIBGR_BCLK_T0 0x00000000 +#define TXX9_SIBGR_BCLK_T2 0x00000100 +#define TXX9_SIBGR_BCLK_T4 0x00000200 +#define TXX9_SIBGR_BCLK_T6 0x00000300 +#define TXX9_SIBGR_BRD_MASK 0x000000ff + +static inline unsigned int sio_in(struct uart_txx9_port *up, int offset) +{ + switch (up->port.iotype) { + default: + return *(volatile u32 *)(up->port.membase + offset); + case UPIO_PORT: + return inl(up->port.iobase + offset); + } +} + +static inline void +sio_out(struct uart_txx9_port *up, int offset, int value) +{ + switch (up->port.iotype) { + default: + *(volatile u32 *)(up->port.membase + offset) = value; + break; + case UPIO_PORT: + outl(value, up->port.iobase + offset); + break; + } +} + +static inline void +sio_mask(struct uart_txx9_port *up, int offset, unsigned int value) +{ + sio_out(up, offset, sio_in(up, offset) & ~value); +} +static inline void +sio_set(struct uart_txx9_port *up, int offset, unsigned int value) +{ + sio_out(up, offset, sio_in(up, offset) | value); +} + +static inline void +sio_quot_set(struct uart_txx9_port *up, int quot) +{ + quot >>= 1; + if (quot < 256) + sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0); + else if (quot < (256 << 2)) + sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2); + else if (quot < (256 << 4)) + sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4); + else if (quot < (256 << 6)) + sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6); + else + sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6); +} + +static void serial_txx9_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void serial_txx9_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void serial_txx9_stop_rx(struct uart_port *port) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + up->port.read_status_mask &= ~TXX9_SIDISR_RDIS; +#if 0 + sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_RIE); +#endif + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void serial_txx9_enable_ms(struct uart_port *port) +{ + /* TXX9-SIO can not control DTR... */ +} + +static inline void +receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *regs) +{ + struct tty_struct *tty = up->port.info->tty; + unsigned char ch; + unsigned int disr = *status; + int max_count = 256; + char flag; + + do { + /* The following is not allowed by the tty layer and + unsafe. It should be fixed ASAP */ + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + if(tty->low_latency) + tty_flip_buffer_push(tty); + /* If this failed then we will throw away the + bytes but must do so to clear interrupts */ + } + ch = sio_in(up, TXX9_SIRFIFO); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER | + TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) { + /* + * For statistics only + */ + if (disr & TXX9_SIDISR_UBRK) { + disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (disr & TXX9_SIDISR_UPER) + up->port.icount.parity++; + else if (disr & TXX9_SIDISR_UFER) + up->port.icount.frame++; + if (disr & TXX9_SIDISR_UOER) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + disr &= up->port.read_status_mask; + + if (disr & TXX9_SIDISR_UBRK) { + flag = TTY_BREAK; + } else if (disr & TXX9_SIDISR_UPER) + flag = TTY_PARITY; + else if (disr & TXX9_SIDISR_UFER) + flag = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch, regs)) + goto ignore_char; + if ((disr & up->port.ignore_status_mask) == 0) { + tty_insert_flip_char(tty, ch, flag); + } + if ((disr & TXX9_SIDISR_UOER) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + ignore_char: + disr = sio_in(up, TXX9_SIDISR); + } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); + tty_flip_buffer_push(tty); + *status = disr; +} + +static inline void transmit_chars(struct uart_txx9_port *up) +{ + struct circ_buf *xmit = &up->port.info->xmit; + int count; + + if (up->port.x_char) { + sio_out(up, TXX9_SITFIFO, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_txx9_stop_tx(&up->port, 0); + return; + } + + count = TXX9_SIO_TX_FIFO; + do { + sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + serial_txx9_stop_tx(&up->port, 0); +} + +static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + int pass_counter = 0; + struct uart_txx9_port *up = dev_id; + unsigned int status; + + while (1) { + spin_lock(&up->port.lock); + status = sio_in(up, TXX9_SIDISR); + if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE)) + status &= ~TXX9_SIDISR_TDIS; + if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | + TXX9_SIDISR_TOUT))) { + spin_unlock(&up->port.lock); + break; + } + + if (status & TXX9_SIDISR_RDIS) + receive_chars(up, &status, regs); + if (status & TXX9_SIDISR_TDIS) + transmit_chars(up); + /* Clear TX/RX Int. Status */ + sio_mask(up, TXX9_SIDISR, + TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS | + TXX9_SIDISR_TOUT); + spin_unlock(&up->port.lock); + + if (pass_counter++ > PASS_LIMIT) + break; + } + + return pass_counter ? IRQ_HANDLED : IRQ_NONE; +} + +static unsigned int serial_txx9_tx_empty(struct uart_port *port) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_txx9_get_mctrl(struct uart_port *port) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = ((sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS) + | ((sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS); + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (mctrl & TIOCM_RTS) + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); + else + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void serial_txx9_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + else + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int serial_txx9_startup(struct uart_port *port) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned long flags; + int retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reeanbled in set_termios()) + */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + /* clear reset */ + sio_mask(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + sio_out(up, TXX9_SIDICR, 0); + + /* + * Clear the interrupt registers. + */ + sio_out(up, TXX9_SIDISR, 0); + + retval = request_irq(up->port.irq, serial_txx9_interrupt, + SA_SHIRQ, "serial_txx9", up); + if (retval) + return retval; + + /* + * Now, initialize the UART + */ + spin_lock_irqsave(&up->port.lock, flags); + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* Enable RX/TX */ + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); + + /* + * Finally, enable interrupts. + */ + sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE); + + return 0; +} + +static void serial_txx9_shutdown(struct uart_port *port) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned long flags; + + /* + * Disable interrupts from this port + */ + sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */ + + spin_lock_irqsave(&up->port.lock, flags); + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition + */ + sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK); + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + if (up->port.cons && up->port.line == up->port.cons->index) { + free_irq(up->port.irq, up); + return; + } +#endif + /* reset FIFOs */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + /* clear reset */ + sio_mask(up, TXX9_SIFCR, + TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE); + + /* Disable RX/TX */ + sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE); + + free_irq(up->port.irq, up); +} + +static void +serial_txx9_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned int cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + + cval = sio_in(up, TXX9_SILCR); + /* byte size and parity */ + cval &= ~TXX9_SILCR_UMODE_MASK; + switch (termios->c_cflag & CSIZE) { + case CS7: + cval |= TXX9_SILCR_UMODE_7BIT; + break; + default: + case CS5: /* not supported */ + case CS6: /* not supported */ + case CS8: + cval |= TXX9_SILCR_UMODE_8BIT; + break; + } + + cval &= ~TXX9_SILCR_USBL_MASK; + if (termios->c_cflag & CSTOPB) + cval |= TXX9_SILCR_USBL_2BIT; + else + cval |= TXX9_SILCR_USBL_1BIT; + cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS); + if (termios->c_cflag & PARENB) + cval |= TXX9_SILCR_UPEN; + if (!(termios->c_cflag & PARODD)) + cval |= TXX9_SILCR_UEPS; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2); + quot = uart_get_divisor(port, baud); + + /* Set up FIFOs */ + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = TXX9_SIDISR_UOER | + TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER; + if (termios->c_iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= TXX9_SIDISR_UBRK; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= TXX9_SIDISR_UBRK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= TXX9_SIDISR_UOER; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= TXX9_SIDISR_RDIS; + + /* CTS flow control flag */ + if ((termios->c_cflag & CRTSCTS) && + (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) { + sio_set(up, TXX9_SIFLCR, + TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); + } else { + sio_mask(up, TXX9_SIFLCR, + TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES); + } + + sio_out(up, TXX9_SILCR, cval); + sio_quot_set(up, quot); + sio_out(up, TXX9_SIFCR, fcr); + + serial_txx9_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_txx9_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + if (state) { + /* sleep */ + + if (up->pm) + up->pm(port, state, oldstate); + } else { + /* wake */ + + if (up->pm) + up->pm(port, state, oldstate); + } +} + +static int serial_txx9_request_resource(struct uart_txx9_port *up) +{ + unsigned int size = TXX9_REGION_SIZE; + int ret = 0; + + switch (up->port.iotype) { + default: + if (!up->port.mapbase) + break; + + if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) { + ret = -EBUSY; + break; + } + + if (up->port.flags & UPF_IOREMAP) { + up->port.membase = ioremap(up->port.mapbase, size); + if (!up->port.membase) { + release_mem_region(up->port.mapbase, size); + ret = -ENOMEM; + } + } + break; + + case UPIO_PORT: + if (!request_region(up->port.iobase, size, "serial_txx9")) + ret = -EBUSY; + break; + } + return ret; +} + +static void serial_txx9_release_resource(struct uart_txx9_port *up) +{ + unsigned int size = TXX9_REGION_SIZE; + + switch (up->port.iotype) { + default: + if (!up->port.mapbase) + break; + + if (up->port.flags & UPF_IOREMAP) { + iounmap(up->port.membase); + up->port.membase = NULL; + } + + release_mem_region(up->port.mapbase, size); + break; + + case UPIO_PORT: + release_region(up->port.iobase, size); + break; + } +} + +static void serial_txx9_release_port(struct uart_port *port) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + serial_txx9_release_resource(up); +} + +static int serial_txx9_request_port(struct uart_port *port) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + return serial_txx9_request_resource(up); +} + +static void serial_txx9_config_port(struct uart_port *port, int uflags) +{ + struct uart_txx9_port *up = (struct uart_txx9_port *)port; + unsigned long flags; + int ret; + + /* + * Find the region that we can probe for. This in turn + * tells us whether we can probe for the type of port. + */ + ret = serial_txx9_request_resource(up); + if (ret < 0) + return; + port->type = PORT_TXX9; + up->port.fifosize = TXX9_SIO_TX_FIFO; + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + if (up->port.line == up->port.cons->index) + return; +#endif + spin_lock_irqsave(&up->port.lock, flags); + /* + * Reset the UART. + */ + sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST); +#ifdef CONFIG_CPU_TX49XX + /* TX4925 BUG WORKAROUND. Accessing SIOC register + * immediately after soft reset causes bus error. */ + iob(); + udelay(1); +#endif + while (sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) + ; + /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */ + sio_set(up, TXX9_SIFCR, + TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1); + /* initial settings */ + sio_out(up, TXX9_SILCR, + TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | + ((up->port.flags & UPF_TXX9_USE_SCLK) ? + TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); + sio_quot_set(up, uart_get_divisor(port, 9600)); + sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int +serial_txx9_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if (ser->irq < 0 || + ser->baud_base < 9600 || ser->type != PORT_TXX9) + return -EINVAL; + return 0; +} + +static const char * +serial_txx9_type(struct uart_port *port) +{ + return "txx9"; +} + +static struct uart_ops serial_txx9_pops = { + .tx_empty = serial_txx9_tx_empty, + .set_mctrl = serial_txx9_set_mctrl, + .get_mctrl = serial_txx9_get_mctrl, + .stop_tx = serial_txx9_stop_tx, + .start_tx = serial_txx9_start_tx, + .stop_rx = serial_txx9_stop_rx, + .enable_ms = serial_txx9_enable_ms, + .break_ctl = serial_txx9_break_ctl, + .startup = serial_txx9_startup, + .shutdown = serial_txx9_shutdown, + .set_termios = serial_txx9_set_termios, + .pm = serial_txx9_pm, + .type = serial_txx9_type, + .release_port = serial_txx9_release_port, + .request_port = serial_txx9_request_port, + .config_port = serial_txx9_config_port, + .verify_port = serial_txx9_verify_port, +}; + +static struct uart_txx9_port serial_txx9_ports[UART_NR]; + +static void __init serial_txx9_register_ports(struct uart_driver *drv) +{ + int i; + + for (i = 0; i < UART_NR; i++) { + struct uart_txx9_port *up = &serial_txx9_ports[i]; + + up->port.line = i; + up->port.ops = &serial_txx9_pops; + uart_add_one_port(drv, &up->port); + } +} + +#ifdef CONFIG_SERIAL_TXX9_CONSOLE + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_txx9_port *up) +{ + unsigned int tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + while (--tmout && + !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS)) + udelay(1); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS)) + udelay(1); + } +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_txx9_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_txx9_port *up = &serial_txx9_ports[co->index]; + unsigned int ier, flcr; + int i; + + /* + * First save the UER then disable the interrupts + */ + ier = sio_in(up, TXX9_SIDICR); + sio_out(up, TXX9_SIDICR, 0); + /* + * Disable flow-control if enabled (and unnecessary) + */ + flcr = sio_in(up, TXX9_SIFLCR); + if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES)) + sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++, s++) { + wait_for_xmitr(up); + + /* + * Send the character out. + * If a LF, also do CR... + */ + sio_out(up, TXX9_SITFIFO, *s); + if (*s == 10) { + wait_for_xmitr(up); + sio_out(up, TXX9_SITFIFO, 13); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + sio_out(up, TXX9_SIFLCR, flcr); + sio_out(up, TXX9_SIDICR, ier); +} + +static int serial_txx9_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + struct uart_txx9_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + up = &serial_txx9_ports[co->index]; + port = &up->port; + if (!port->ops) + return -ENODEV; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + /* + * Disable UART interrupts, set DTR and RTS high + * and set speed. + */ + sio_out(up, TXX9_SIDICR, 0); + /* initial settings */ + sio_out(up, TXX9_SILCR, + TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT | + ((port->flags & UPF_TXX9_USE_SCLK) ? + TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG)); + sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver serial_txx9_reg; +static struct console serial_txx9_console = { + .name = TXX9_TTY_NAME, + .write = serial_txx9_console_write, + .device = uart_console_device, + .setup = serial_txx9_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_txx9_reg, +}; + +static int __init serial_txx9_console_init(void) +{ + register_console(&serial_txx9_console); + return 0; +} +console_initcall(serial_txx9_console_init); + +static int __init serial_txx9_late_console_init(void) +{ + if (!(serial_txx9_console.flags & CON_ENABLED)) + register_console(&serial_txx9_console); + return 0; +} +late_initcall(serial_txx9_late_console_init); + +#define SERIAL_TXX9_CONSOLE &serial_txx9_console +#else +#define SERIAL_TXX9_CONSOLE NULL +#endif + +static struct uart_driver serial_txx9_reg = { + .owner = THIS_MODULE, + .driver_name = "serial_txx9", + .devfs_name = TXX9_TTY_DEVFS_NAME, + .dev_name = TXX9_TTY_NAME, + .major = TXX9_TTY_MAJOR, + .minor = TXX9_TTY_MINOR_START, + .nr = UART_NR, + .cons = SERIAL_TXX9_CONSOLE, +}; + +int __init early_serial_txx9_setup(struct uart_port *port) +{ + if (port->line >= ARRAY_SIZE(serial_txx9_ports)) + return -ENODEV; + + serial_txx9_ports[port->line].port = *port; + serial_txx9_ports[port->line].port.ops = &serial_txx9_pops; + serial_txx9_ports[port->line].port.flags |= UPF_BOOT_AUTOCONF; + return 0; +} + +#ifdef ENABLE_SERIAL_TXX9_PCI +/** + * serial_txx9_suspend_port - suspend one serial port + * @line: serial line number + * @level: the level of port suspension, as per uart_suspend_port + * + * Suspend one serial port. + */ +static void serial_txx9_suspend_port(int line) +{ + uart_suspend_port(&serial_txx9_reg, &serial_txx9_ports[line].port); +} + +/** + * serial_txx9_resume_port - resume one serial port + * @line: serial line number + * @level: the level of port resumption, as per uart_resume_port + * + * Resume one serial port. + */ +static void serial_txx9_resume_port(int line) +{ + uart_resume_port(&serial_txx9_reg, &serial_txx9_ports[line].port); +} + +/* + * Probe one serial board. Unfortunately, there is no rhyme nor reason + * to the arrangement of serial ports on a PCI card. + */ +static int __devinit +pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent) +{ + struct uart_port port; + int line; + int rc; + + rc = pci_enable_device(dev); + if (rc) + return rc; + + memset(&port, 0, sizeof(port)); + port.ops = &serial_txx9_pops; + port.flags |= UPF_BOOT_AUTOCONF; /* uart_ops.config_port will be called */ + port.flags |= UPF_TXX9_HAVE_CTS_LINE; + port.uartclk = 66670000; + port.irq = dev->irq; + port.iotype = UPIO_PORT; + port.iobase = pci_resource_start(dev, 1); + line = uart_register_port(&serial_txx9_reg, &port); + if (line < 0) { + printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line); + } + pci_set_drvdata(dev, (void *)(long)line); + + return 0; +} + +static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev) +{ + int line = (int)(long)pci_get_drvdata(dev); + + pci_set_drvdata(dev, NULL); + + if (line) { + uart_unregister_port(&serial_txx9_reg, line); + pci_disable_device(dev); + } +} + +static int pciserial_txx9_suspend_one(struct pci_dev *dev, u32 state) +{ + int line = (int)(long)pci_get_drvdata(dev); + + if (line) + serial_txx9_suspend_port(line); + return 0; +} + +static int pciserial_txx9_resume_one(struct pci_dev *dev) +{ + int line = (int)(long)pci_get_drvdata(dev); + + if (line) + serial_txx9_resume_port(line); + return 0; +} + +static struct pci_device_id serial_txx9_pci_tbl[] = { + { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0 }, + { 0, } +}; + +static struct pci_driver serial_txx9_pci_driver = { + .name = "serial_txx9", + .probe = pciserial_txx9_init_one, + .remove = __devexit_p(pciserial_txx9_remove_one), + .suspend = pciserial_txx9_suspend_one, + .resume = pciserial_txx9_resume_one, + .id_table = serial_txx9_pci_tbl, +}; + +MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl); +#endif /* ENABLE_SERIAL_TXX9_PCI */ + +static int __init serial_txx9_init(void) +{ + int ret; + + printk(KERN_INFO "%s version %s\n", serial_name, serial_version); + + ret = uart_register_driver(&serial_txx9_reg); + if (ret >= 0) { + serial_txx9_register_ports(&serial_txx9_reg); + +#ifdef ENABLE_SERIAL_TXX9_PCI + ret = pci_module_init(&serial_txx9_pci_driver); +#endif + } + return ret; +} + +static void __exit serial_txx9_exit(void) +{ + int i; + +#ifdef ENABLE_SERIAL_TXX9_PCI + pci_unregister_driver(&serial_txx9_pci_driver); +#endif + for (i = 0; i < UART_NR; i++) + uart_remove_one_port(&serial_txx9_reg, &serial_txx9_ports[i].port); + + uart_unregister_driver(&serial_txx9_reg); +} + +module_init(serial_txx9_init); +module_exit(serial_txx9_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("TX39/49 serial driver"); + +MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c new file mode 100644 index 000000000000..ad5b776d779b --- /dev/null +++ b/drivers/serial/sh-sci.c @@ -0,0 +1,1692 @@ +/* + * drivers/serial/sh-sci.c + * + * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) + * + * Copyright (C) 2002, 2003, 2004 Paul Mundt + * + * based off of the old drivers/char/sh-sci.c by: + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2000 Sugioka Toshinobu + * Modified to support multiple serial ports. Stuart Menefy (May 2000). + * Modified to support SecureEdge. David McCullough (2002) + * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003). + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_CPU_FREQ +#include +#include +#endif + +#include +#include +#include +#include + +#include + +#ifdef CONFIG_SH_STANDARD_BIOS +#include +#endif + +#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include "sh-sci.h" + +#ifdef CONFIG_SH_KGDB +#include + +static int kgdb_get_char(struct sci_port *port); +static void kgdb_put_char(struct sci_port *port, char c); +static void kgdb_handle_error(struct sci_port *port); +static struct sci_port *kgdb_sci_port; +#endif /* CONFIG_SH_KGDB */ + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +static struct sci_port *serial_console_port = 0; +#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ + +/* Function prototypes */ +static void sci_stop_tx(struct uart_port *port, unsigned int tty_stop); +static void sci_start_tx(struct uart_port *port, unsigned int tty_start); +static void sci_start_rx(struct uart_port *port, unsigned int tty_start); +static void sci_stop_rx(struct uart_port *port); +static int sci_request_irq(struct sci_port *port); +static void sci_free_irq(struct sci_port *port); + +static struct sci_port sci_ports[SCI_NPORTS]; +static struct uart_driver sci_uart_driver; + +#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) + +static void handle_error(struct uart_port *port) +{ /* Clear error flags */ + sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); +} + +static int get_char(struct uart_port *port) +{ + unsigned long flags; + unsigned short status; + int c; + + local_irq_save(flags); + do { + status = sci_in(port, SCxSR); + if (status & SCxSR_ERRORS(port)) { + handle_error(port); + continue; + } + } while (!(status & SCxSR_RDxF(port))); + c = sci_in(port, SCxRDR); + sci_in(port, SCxSR); /* Dummy read */ + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + local_irq_restore(flags); + + return c; +} + +/* Taken from sh-stub.c of GDB 4.18 */ +static const char hexchars[] = "0123456789abcdef"; + +static __inline__ char highhex(int x) +{ + return hexchars[(x >> 4) & 0xf]; +} + +static __inline__ char lowhex(int x) +{ + return hexchars[x & 0xf]; +} + +#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */ + +/* + * Send the packet in buffer. The host gets one chance to read it. + * This routine does not wait for a positive acknowledge. + */ + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +static void put_char(struct uart_port *port, char c) +{ + unsigned long flags; + unsigned short status; + + local_irq_save(flags); + + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TDxE(port))); + + sci_out(port, SCxTDR, c); + sci_in(port, SCxSR); /* Dummy read */ + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + + local_irq_restore(flags); +} + +static void put_string(struct sci_port *sci_port, const char *buffer, int count) +{ + struct uart_port *port = &sci_port->port; + const unsigned char *p = buffer; + int i; + +#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB) + int checksum; + int usegdb=0; + +#ifdef CONFIG_SH_STANDARD_BIOS + /* This call only does a trap the first time it is + * called, and so is safe to do here unconditionally + */ + usegdb |= sh_bios_in_gdb_mode(); +#endif +#ifdef CONFIG_SH_KGDB + usegdb |= (kgdb_in_gdb_mode && (port == kgdb_sci_port)); +#endif + + if (usegdb) { + /* $#. */ + do { + unsigned char c; + put_char(port, '$'); + put_char(port, 'O'); /* 'O'utput to console */ + checksum = 'O'; + + for (i=0; imapbase - SMR0) >> 3; + unsigned char mask = 1 << (ch+1); + + if (ctrl == sci_disable) { + *mstpcrl |= mask; + } else { + *mstpcrl &= ~mask; + } +} +#endif + +#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) +#if defined(__H8300H__) || defined(__H8300S__) +static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag) +{ + int ch = (port->mapbase - SMR0) >> 3; + + /* set DDR regs */ + H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].rx,H8300_GPIO_INPUT); + H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].tx,H8300_GPIO_OUTPUT); + /* tx mark output*/ + H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx; +} +#else +static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag) +{ +} +#endif +#endif + +#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) +#if defined(CONFIG_CPU_SH3) +/* For SH7705, SH7707, SH7709, SH7709A, SH7729, SH7300*/ +static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) +{ + unsigned int fcr_val = 0; +#if !defined(CONFIG_CPU_SUBTYPE_SH7300) /* SH7300 doesn't use RTS/CTS */ + { + unsigned short data; + + /* We need to set SCPCR to enable RTS/CTS */ + data = ctrl_inw(SCPCR); + /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/ + ctrl_outw(data&0x0fcf, SCPCR); + } + if (cflag & CRTSCTS) + fcr_val |= SCFCR_MCE; + else { + unsigned short data; + + /* We need to set SCPCR to enable RTS/CTS */ + data = ctrl_inw(SCPCR); + /* Clear out SCP7MD1,0, SCP4MD1,0, + Set SCP6MD1,0 = {01} (output) */ + ctrl_outw((data&0x0fcf)|0x1000, SCPCR); + + data = ctrl_inb(SCPDR); + /* Set /RTS2 (bit6) = 0 */ + ctrl_outb(data&0xbf, SCPDR); + } +#endif + sci_out(port, SCFCR, fcr_val); +} + +static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) +{ + unsigned int fcr_val = 0; + + if (cflag & CRTSCTS) + fcr_val |= SCFCR_MCE; + + sci_out(port, SCFCR, fcr_val); +} + +#else + +/* For SH7750 */ +static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) +{ + unsigned int fcr_val = 0; + + if (cflag & CRTSCTS) { + fcr_val |= SCFCR_MCE; + } else { + ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */ + } + sci_out(port, SCFCR, fcr_val); +} + +#endif +#endif /* SCIF_ONLY || SCI_AND_SCIF */ + +/* ********************************************************************** * + * the interrupt related routines * + * ********************************************************************** */ + +static void sci_transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + unsigned int stopped = uart_tx_stopped(port); + unsigned long flags; + unsigned short status; + unsigned short ctrl; + int count, txroom; + + status = sci_in(port, SCxSR); + if (!(status & SCxSR_TDxE(port))) { + local_irq_save(flags); + ctrl = sci_in(port, SCSCR); + if (uart_circ_empty(xmit)) { + ctrl &= ~SCI_CTRL_FLAGS_TIE; + } else { + ctrl |= SCI_CTRL_FLAGS_TIE; + } + sci_out(port, SCSCR, ctrl); + local_irq_restore(flags); + return; + } + +#if !defined(SCI_ONLY) + if (port->type == PORT_SCIF) { + txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8); + } else { + txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0; + } +#else + txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0; +#endif + + count = txroom; + + do { + unsigned char c; + + if (port->x_char) { + c = port->x_char; + port->x_char = 0; + } else if (!uart_circ_empty(xmit) && !stopped) { + c = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } else { + break; + } + + sci_out(port, SCxTDR, c); + + port->icount.tx++; + } while (--count > 0); + + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + if (uart_circ_empty(xmit)) { + sci_stop_tx(port, 0); + } else { + local_irq_save(flags); + ctrl = sci_in(port, SCSCR); + +#if !defined(SCI_ONLY) + if (port->type == PORT_SCIF) { + sci_in(port, SCxSR); /* Dummy read */ + sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + } +#endif + + ctrl |= SCI_CTRL_FLAGS_TIE; + sci_out(port, SCSCR, ctrl); + local_irq_restore(flags); + } +} + +/* On SH3, SCIF may read end-of-break as a space->mark char */ +#define STEPFN(c) ({int __c=(c); (((__c-1)|(__c)) == -1); }) + +static inline void sci_receive_chars(struct uart_port *port, + struct pt_regs *regs) +{ + struct tty_struct *tty = port->info->tty; + int i, count, copied = 0; + unsigned short status; + + status = sci_in(port, SCxSR); + if (!(status & SCxSR_RDxF(port))) + return; + + while (1) { +#if !defined(SCI_ONLY) + if (port->type == PORT_SCIF) { + count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ; + } else { + count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0; + } +#else + count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0; +#endif + + /* Don't copy more bytes than there is room for in the buffer */ + if (tty->flip.count + count > TTY_FLIPBUF_SIZE) + count = TTY_FLIPBUF_SIZE - tty->flip.count; + + /* If for any reason we can't copy more data, we're done! */ + if (count == 0) + break; + + if (port->type == PORT_SCI) { + char c = sci_in(port, SCxRDR); + if(((struct sci_port *)port)->break_flag + || uart_handle_sysrq_char(port, c, regs)) { + count = 0; + } else { + tty->flip.char_buf_ptr[0] = c; + tty->flip.flag_buf_ptr[0] = TTY_NORMAL; + } + } else { + for (i=0; ibreak_flag) { + if ((c == 0) && + (status & SCxSR_FER(port))) { + count--; i--; + continue; + } + /* Nonzero => end-of-break */ + pr_debug("scif: debounce<%02x>\n", c); + ((struct sci_port *)port)->break_flag = 0; + if (STEPFN(c)) { + count--; i--; + continue; + } + } +#endif /* CONFIG_CPU_SH3 */ + if (uart_handle_sysrq_char(port, c, regs)) { + count--; i--; + continue; + } + + /* Store data and status */ + tty->flip.char_buf_ptr[i] = c; + if (status&SCxSR_FER(port)) { + tty->flip.flag_buf_ptr[i] = TTY_FRAME; + pr_debug("sci: frame error\n"); + } else if (status&SCxSR_PER(port)) { + tty->flip.flag_buf_ptr[i] = TTY_PARITY; + pr_debug("sci: parity error\n"); + } else { + tty->flip.flag_buf_ptr[i] = TTY_NORMAL; + } + } + } + + sci_in(port, SCxSR); /* dummy read */ + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + + /* Update the kernel buffer end */ + tty->flip.count += count; + tty->flip.char_buf_ptr += count; + tty->flip.flag_buf_ptr += count; + copied += count; + port->icount.rx += count; + } + + if (copied) { + /* Tell the rest of the system the news. New characters! */ + tty_flip_buffer_push(tty); + } else { + sci_in(port, SCxSR); /* dummy read */ + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + } +} + +#define SCI_BREAK_JIFFIES (HZ/20) +/* The sci generates interrupts during the break, + * 1 per millisecond or so during the break period, for 9600 baud. + * So dont bother disabling interrupts. + * But dont want more than 1 break event. + * Use a kernel timer to periodically poll the rx line until + * the break is finished. + */ +static void sci_schedule_break_timer(struct sci_port *port) +{ + port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES; + add_timer(&port->break_timer); +} +/* Ensure that two consecutive samples find the break over. */ +static void sci_break_timer(unsigned long data) +{ + struct sci_port * port = (struct sci_port *)data; + if(sci_rxd_in(&port->port) == 0) { + port->break_flag = 1; + sci_schedule_break_timer(port); + } else if(port->break_flag == 1){ + /* break is over. */ + port->break_flag = 2; + sci_schedule_break_timer(port); + } else port->break_flag = 0; +} + +static inline int sci_handle_errors(struct uart_port *port) +{ + int copied = 0; + unsigned short status = sci_in(port, SCxSR); + struct tty_struct *tty = port->info->tty; + + if (status&SCxSR_ORER(port) && tty->flip.countflip.flag_buf_ptr++ = TTY_OVERRUN; + pr_debug("sci: overrun error\n"); + } + + if (status&SCxSR_FER(port) && tty->flip.countbreak_flag) { + sci_port->break_flag = 1; + sci_schedule_break_timer((struct sci_port *)port); + /* Do sysrq handling. */ + if(uart_handle_break(port)) { + return 0; + } + pr_debug("sci: BREAK detected\n"); + copied++; + *tty->flip.flag_buf_ptr++ = TTY_BREAK; + } + } + else { + /* frame error */ + copied++; + *tty->flip.flag_buf_ptr++ = TTY_FRAME; + pr_debug("sci: frame error\n"); + } + } + + if (status&SCxSR_PER(port) && tty->flip.countflip.flag_buf_ptr++ = TTY_PARITY; + pr_debug("sci: parity error\n"); + } + + if (copied) { + tty->flip.count += copied; + tty_flip_buffer_push(tty); + } + + return copied; +} + +static inline int sci_handle_breaks(struct uart_port *port) +{ + int copied = 0; + unsigned short status = sci_in(port, SCxSR); + struct tty_struct *tty = port->info->tty; + struct sci_port *s = &sci_ports[port->line]; + + if (!s->break_flag && status & SCxSR_BRK(port) && + tty->flip.count < TTY_FLIPBUF_SIZE) { +#if defined(CONFIG_CPU_SH3) + /* Debounce break */ + s->break_flag = 1; +#endif + /* Notify of BREAK */ + copied++; + *tty->flip.flag_buf_ptr++ = TTY_BREAK; + pr_debug("sci: BREAK detected\n"); + } + +#if defined(SCIF_ORER) + /* XXX: Handle SCIF overrun error */ + if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { + sci_out(port, SCLSR, 0); + if(tty->flip.countflip.flag_buf_ptr++ = TTY_OVERRUN; + pr_debug("sci: overrun error\n"); + } + } +#endif + + if (copied) { + tty->flip.count += copied; + tty_flip_buffer_push(tty); + } + + return copied; +} + +static irqreturn_t sci_rx_interrupt(int irq, void *ptr, struct pt_regs *regs) +{ + struct uart_port *port = ptr; + + /* I think sci_receive_chars has to be called irrespective + * of whether the I_IXOFF is set, otherwise, how is the interrupt + * to be disabled? + */ + sci_receive_chars(port, regs); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_tx_interrupt(int irq, void *ptr, struct pt_regs *regs) +{ + struct uart_port *port = ptr; + + sci_transmit_chars(port); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_er_interrupt(int irq, void *ptr, struct pt_regs *regs) +{ + struct uart_port *port = ptr; + + /* Handle errors */ + if (port->type == PORT_SCI) { + if (sci_handle_errors(port)) { + /* discard character in rx buffer */ + sci_in(port, SCxSR); + sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); + } + } else { +#if defined(SCIF_ORER) + if((sci_in(port, SCLSR) & SCIF_ORER) != 0) { + struct tty_struct *tty = port->info->tty; + + sci_out(port, SCLSR, 0); + if(tty->flip.countflip.flag_buf_ptr++ = TTY_OVERRUN; + tty->flip.count++; + tty_flip_buffer_push(tty); + pr_debug("scif: overrun error\n"); + } + } +#endif + sci_rx_interrupt(irq, ptr, regs); + } + + sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); + + /* Kick the transmission */ + sci_tx_interrupt(irq, ptr, regs); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_br_interrupt(int irq, void *ptr, struct pt_regs *regs) +{ + struct uart_port *port = ptr; + + /* Handle BREAKs */ + sci_handle_breaks(port); + sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); + + return IRQ_HANDLED; +} + +static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr, struct pt_regs *regs) +{ + unsigned short ssr_status, scr_status; + struct uart_port *port = ptr; + + ssr_status = sci_in(port,SCxSR); + scr_status = sci_in(port,SCSCR); + + /* Tx Interrupt */ + if ((ssr_status&0x0020) && (scr_status&0x0080)) + sci_tx_interrupt(irq, ptr, regs); + /* Rx Interrupt */ + if ((ssr_status&0x0002) && (scr_status&0x0040)) + sci_rx_interrupt(irq, ptr, regs); + /* Error Interrupt */ + if ((ssr_status&0x0080) && (scr_status&0x0400)) + sci_er_interrupt(irq, ptr, regs); + /* Break Interrupt */ + if ((ssr_status&0x0010) && (scr_status&0x0200)) + sci_br_interrupt(irq, ptr, regs); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_CPU_FREQ +/* + * Here we define a transistion notifier so that we can update all of our + * ports' baud rate when the peripheral clock changes. + */ +static int sci_notifier(struct notifier_block *self, unsigned long phase, void *p) +{ + struct cpufreq_freqs *freqs = p; + int i; + + if ((phase == CPUFREQ_POSTCHANGE) || + (phase == CPUFREQ_RESUMECHANGE)){ + for (i = 0; i < SCI_NPORTS; i++) { + struct uart_port *port = &sci_ports[i].port; + + /* + * Update the uartclk per-port if frequency has + * changed, since it will no longer necessarily be + * consistent with the old frequency. + * + * Really we want to be able to do something like + * uart_change_speed() or something along those lines + * here to implicitly reset the per-port baud rate.. + * + * Clean this up later.. + */ + port->uartclk = current_cpu_data.module_clock * 16; + } + + printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n", + __FUNCTION__, freqs->cpu, freqs->old, freqs->new); + } + + return NOTIFY_OK; +} + +static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 }; +#endif /* CONFIG_CPU_FREQ */ + +static int sci_request_irq(struct sci_port *port) +{ + int i; + irqreturn_t (*handlers[4])(int irq, void *ptr, struct pt_regs *regs) = { + sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt, + sci_br_interrupt, + }; + const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full", + "SCI Transmit Data Empty", "SCI Break" }; + + if (port->irqs[0] == port->irqs[1]) { + if (!port->irqs[0]) { + printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n"); + return -ENODEV; + } + if (request_irq(port->irqs[0], sci_mpxed_interrupt, SA_INTERRUPT, + "sci", port)) { + printk(KERN_ERR "sci: Cannot allocate irq.\n"); + return -ENODEV; + } + } else { + for (i = 0; i < ARRAY_SIZE(handlers); i++) { + if (!port->irqs[i]) + continue; + if (request_irq(port->irqs[i], handlers[i], SA_INTERRUPT, + desc[i], port)) { + printk(KERN_ERR "sci: Cannot allocate irq.\n"); + return -ENODEV; + } + } + } + + return 0; +} + +static void sci_free_irq(struct sci_port *port) +{ + int i; + + if (port->irqs[0] == port->irqs[1]) { + if (!port->irqs[0]) + printk("sci: sci_free_irq error\n"); + else + free_irq(port->irqs[0], port); + } else { + for (i = 0; i < ARRAY_SIZE(port->irqs); i++) { + if (!port->irqs[i]) + continue; + + free_irq(port->irqs[i], port); + } + } +} + +static unsigned int sci_tx_empty(struct uart_port *port) +{ + /* Can't detect */ + return TIOCSER_TEMT; +} + +static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + /* This routine is used for seting signals of: DTR, DCD, CTS/RTS */ + /* We use SCIF's hardware for CTS/RTS, so don't need any for that. */ + /* If you have signals for DTR and DCD, please implement here. */ +} + +static unsigned int sci_get_mctrl(struct uart_port *port) +{ + /* This routine is used for geting signals of: DTR, DCD, DSR, RI, + and CTS/RTS */ + + return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR; +} + +static void sci_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct sci_port *s = &sci_ports[port->line]; + + disable_irq(s->irqs[SCIx_TXI_IRQ]); + sci_transmit_chars(port); + enable_irq(s->irqs[SCIx_TXI_IRQ]); +} + +static void sci_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + unsigned long flags; + unsigned short ctrl; + + /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ + local_irq_save(flags); + ctrl = sci_in(port, SCSCR); + ctrl &= ~SCI_CTRL_FLAGS_TIE; + sci_out(port, SCSCR, ctrl); + local_irq_restore(flags); +} + +static void sci_start_rx(struct uart_port *port, unsigned int tty_start) +{ + unsigned long flags; + unsigned short ctrl; + + /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ + local_irq_save(flags); + ctrl = sci_in(port, SCSCR); + ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; + sci_out(port, SCSCR, ctrl); + local_irq_restore(flags); +} + +static void sci_stop_rx(struct uart_port *port) +{ + unsigned long flags; + unsigned short ctrl; + + /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ + local_irq_save(flags); + ctrl = sci_in(port, SCSCR); + ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); + sci_out(port, SCSCR, ctrl); + local_irq_restore(flags); +} + +static void sci_enable_ms(struct uart_port *port) +{ + /* Nothing here yet .. */ +} + +static void sci_break_ctl(struct uart_port *port, int break_state) +{ + /* Nothing here yet .. */ +} + +static int sci_startup(struct uart_port *port) +{ + struct sci_port *s = &sci_ports[port->line]; + +#if defined(__H8300S__) + h8300_sci_enable(port, sci_enable); +#endif + + sci_request_irq(s); + sci_start_tx(port, 1); + sci_start_rx(port, 1); + + return 0; +} + +static void sci_shutdown(struct uart_port *port) +{ + struct sci_port *s = &sci_ports[port->line]; + + sci_stop_rx(port); + sci_stop_tx(port, 1); + sci_free_irq(s); + +#if defined(__H8300S__) + h8300_sci_enable(port, sci_disable); +#endif +} + +static void sci_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct sci_port *s = &sci_ports[port->line]; + unsigned int status, baud, smr_val; + unsigned long flags; + int t; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + + spin_lock_irqsave(&port->lock, flags); + + do { + status = sci_in(port, SCxSR); + } while (!(status & SCxSR_TEND(port))); + + sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ + +#if !defined(SCI_ONLY) + if (port->type == PORT_SCIF) { + sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); + } +#endif + + smr_val = sci_in(port, SCSMR) & 3; + if ((termios->c_cflag & CSIZE) == CS7) + smr_val |= 0x40; + if (termios->c_cflag & PARENB) + smr_val |= 0x20; + if (termios->c_cflag & PARODD) + smr_val |= 0x30; + if (termios->c_cflag & CSTOPB) + smr_val |= 0x08; + + uart_update_timeout(port, termios->c_cflag, baud); + + sci_out(port, SCSMR, smr_val); + + switch (baud) { + case 0: t = -1; break; + case 2400: t = BPS_2400; break; + case 4800: t = BPS_4800; break; + case 9600: t = BPS_9600; break; + case 19200: t = BPS_19200; break; + case 38400: t = BPS_38400; break; + case 57600: t = BPS_57600; break; + case 115200: t = BPS_115200; break; + default: t = SCBRR_VALUE(baud); break; + } + + if (t > 0) { + if(t >= 256) { + sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1); + t >>= 2; + } else { + sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3); + } + sci_out(port, SCBRR, t); + udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */ + } + + s->init_pins(port, termios->c_cflag); + sci_out(port, SCSCR, SCSCR_INIT(port)); + + if ((termios->c_cflag & CREAD) != 0) + sci_start_rx(port,0); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *sci_type(struct uart_port *port) +{ + switch (port->type) { + case PORT_SCI: return "sci"; + case PORT_SCIF: return "scif"; + case PORT_IRDA: return "irda"; + } + + return 0; +} + +static void sci_release_port(struct uart_port *port) +{ + /* Nothing here yet .. */ +} + +static int sci_request_port(struct uart_port *port) +{ + /* Nothing here yet .. */ + return 0; +} + +static void sci_config_port(struct uart_port *port, int flags) +{ + struct sci_port *s = &sci_ports[port->line]; + + port->type = s->type; + +#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) + if (port->mapbase == 0) + port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF"); + + port->membase = (void *)port->mapbase; +#endif +} + +static int sci_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + struct sci_port *s = &sci_ports[port->line]; + + if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > NR_IRQS) + return -EINVAL; + if (ser->baud_base < 2400) + /* No paper tape reader for Mitch.. */ + return -EINVAL; + + return 0; +} + +static struct uart_ops sci_uart_ops = { + .tx_empty = sci_tx_empty, + .set_mctrl = sci_set_mctrl, + .get_mctrl = sci_get_mctrl, + .start_tx = sci_start_tx, + .stop_tx = sci_stop_tx, + .stop_rx = sci_stop_rx, + .enable_ms = sci_enable_ms, + .break_ctl = sci_break_ctl, + .startup = sci_startup, + .shutdown = sci_shutdown, + .set_termios = sci_set_termios, + .type = sci_type, + .release_port = sci_release_port, + .request_port = sci_request_port, + .config_port = sci_config_port, + .verify_port = sci_verify_port, +}; + +static struct sci_port sci_ports[SCI_NPORTS] = { +#if defined(CONFIG_CPU_SUBTYPE_SH7708) + { + .port = { + .membase = (void *)0xfffffe80, + .mapbase = 0xfffffe80, + .iotype = SERIAL_IO_MEM, + .irq = 25, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCI, + .irqs = SCI_IRQS, + .init_pins = sci_init_pins_sci, + }, +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) + { + .port = { + .membase = (void *)SCIF0, + .mapbase = SCIF0, + .iotype = SERIAL_IO_MEM, + .irq = 55, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCIF, + .irqs = SH3_IRDA_IRQS, + .init_pins = sci_init_pins_scif, + }, + { + .port = { + .membase = (void *)SCIF2, + .mapbase = SCIF2, + .iotype = SERIAL_IO_MEM, + .irq = 59, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + .type = PORT_SCIF, + .irqs = SH3_SCIF_IRQS, + .init_pins = sci_init_pins_scif, + } +#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) + { + .port = { + .membase = (void *)0xfffffe80, + .mapbase = 0xfffffe80, + .iotype = SERIAL_IO_MEM, + .irq = 25, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCI, + .irqs = SCI_IRQS, + .init_pins = sci_init_pins_sci, + }, + { + .port = { + .membase = (void *)0xa4000150, + .mapbase = 0xa4000150, + .iotype = SERIAL_IO_MEM, + .irq = 59, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + .type = PORT_SCIF, + .irqs = SH3_SCIF_IRQS, + .init_pins = sci_init_pins_scif, + }, + { + .port = { + .membase = (void *)0xa4000140, + .mapbase = 0xa4000140, + .iotype = SERIAL_IO_MEM, + .irq = 55, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 2, + }, + .type = PORT_IRDA, + .irqs = SH3_IRDA_IRQS, + .init_pins = sci_init_pins_irda, + } +#elif defined(CONFIG_CPU_SUBTYPE_SH7300) + { + .port = { + .membase = (void *)0xA4430000, + .mapbase = 0xA4430000, + .iotype = SERIAL_IO_MEM, + .irq = 25, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCIF, + .irqs = SH7300_SCIF0_IRQS, + .init_pins = sci_init_pins_scif, + }, +#elif defined(CONFIG_CPU_SUBTYPE_SH73180) + { + .port = { + .membase = (void *)0xffe00000, + .mapbase = 0xffe00000, + .iotype = SERIAL_IO_MEM, + .irq = 25, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCIF, + .irqs = SH73180_SCIF_IRQS, + .init_pins = sci_init_pins_scif, + }, +#elif defined(CONFIG_SH_RTS7751R2D) + { + .port = { + .membase = (void *)0xffe80000, + .mapbase = 0xffe80000, + .iotype = SERIAL_IO_MEM, + .irq = 43, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCIF, + .irqs = SH4_SCIF_IRQS, + .init_pins = sci_init_pins_scif, + }, +#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) + { + .port = { + .membase = (void *)0xffe00000, + .mapbase = 0xffe00000, + .iotype = SERIAL_IO_MEM, + .irq = 25, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCI, + .irqs = SCI_IRQS, + .init_pins = sci_init_pins_sci, + }, + { + .port = { + .membase = (void *)0xffe80000, + .mapbase = 0xffe80000, + .iotype = SERIAL_IO_MEM, + .irq = 43, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + .type = PORT_SCIF, + .irqs = SH4_SCIF_IRQS, + .init_pins = sci_init_pins_scif, + }, +#elif defined(CONFIG_CPU_SUBTYPE_SH7760) + { + .port = { + .membase = (void *)0xfe600000, + .mapbase = 0xfe600000, + .iotype = SERIAL_IO_MEM, + .irq = 55, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCIF, + .irqs = SH7760_SCIF0_IRQS, + .init_pins = sci_init_pins_scif, + }, + { + .port = { + .membase = (void *)0xfe610000, + .mapbase = 0xfe610000, + .iotype = SERIAL_IO_MEM, + .irq = 75, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + .type = PORT_SCIF, + .irqs = SH7760_SCIF1_IRQS, + .init_pins = sci_init_pins_scif, + }, + { + .port = { + .membase = (void *)0xfe620000, + .mapbase = 0xfe620000, + .iotype = SERIAL_IO_MEM, + .irq = 79, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 2, + }, + .type = PORT_SCIF, + .irqs = SH7760_SCIF2_IRQS, + .init_pins = sci_init_pins_scif, + }, +#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) + { + .port = { + .membase = (void *)0xffe80000, + .mapbase = 0xffe80000, + .iotype = SERIAL_IO_MEM, + .irq = 43, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCIF, + .irqs = SH4_SCIF_IRQS, + .init_pins = sci_init_pins_scif, + }, +#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) + { + .port = { + .membase = (void *)0xffe00000, + .mapbase = 0xffe00000, + .iotype = SERIAL_IO_MEM, + .irq = 26, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCIF, + .irqs = STB1_SCIF1_IRQS, + .init_pins = sci_init_pins_scif, + }, + { + .port = { + .membase = (void *)0xffe80000, + .mapbase = 0xffe80000, + .iotype = SERIAL_IO_MEM, + .irq = 43, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + .type = PORT_SCIF, + .irqs = SH4_SCIF_IRQS, + .init_pins = sci_init_pins_scif, + }, +#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) + { + .port = { + .iotype = SERIAL_IO_MEM, + .irq = 42, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCIF, + .irqs = SH5_SCIF_IRQS, + .init_pins = sci_init_pins_scif, + }, +#elif defined(CONFIG_H83007) || defined(CONFIG_H83068) + { + .port = { + .membase = (void *)0x00ffffb0, + .mapbase = 0x00ffffb0, + .iotype = SERIAL_IO_MEM, + .irq = 54, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCI, + .irqs = H8300H_SCI_IRQS0, + .init_pins = sci_init_pins_sci, + }, + { + .port = { + .membase = (void *)0x00ffffb8, + .mapbase = 0x00ffffb8, + .iotype = SERIAL_IO_MEM, + .irq = 58, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + .type = PORT_SCI, + .irqs = H8300H_SCI_IRQS1, + .init_pins = sci_init_pins_sci, + }, + { + .port = { + .membase = (void *)0x00ffffc0, + .mapbase = 0x00ffffc0, + .iotype = SERIAL_IO_MEM, + .irq = 62, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 2, + }, + .type = PORT_SCI, + .irqs = H8300H_SCI_IRQS2, + .init_pins = sci_init_pins_sci, + }, +#elif defined(CONFIG_H8S2678) + { + .port = { + .membase = (void *)0x00ffff78, + .mapbase = 0x00ffff78, + .iotype = SERIAL_IO_MEM, + .irq = 90, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 0, + }, + .type = PORT_SCI, + .irqs = H8S_SCI_IRQS0, + .init_pins = sci_init_pins_sci, + }, + { + .port = { + .membase = (void *)0x00ffff80, + .mapbase = 0x00ffff80, + .iotype = SERIAL_IO_MEM, + .irq = 94, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 1, + }, + .type = PORT_SCI, + .irqs = H8S_SCI_IRQS1, + .init_pins = sci_init_pins_sci, + }, + { + .port = { + .membase = (void *)0x00ffff88, + .mapbase = 0x00ffff88, + .iotype = SERIAL_IO_MEM, + .irq = 98, + .ops = &sci_uart_ops, + .flags = ASYNC_BOOT_AUTOCONF, + .line = 2, + }, + .type = PORT_SCI, + .irqs = H8S_SCI_IRQS2, + .init_pins = sci_init_pins_sci, + }, +#else +#error "CPU subtype not defined" +#endif +}; + +#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void serial_console_write(struct console *co, const char *s, + unsigned count) +{ + put_string(serial_console_port, s, count); +} + +static int __init serial_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + int ret; + + if (co->index >= SCI_NPORTS) + co->index = 0; + + serial_console_port = &sci_ports[co->index]; + port = &serial_console_port->port; + port->type = serial_console_port->type; + +#ifdef CONFIG_SUPERH64 + /* This is especially needed on sh64 to remap the SCIF */ + sci_config_port(port, 0); +#endif + + /* + * We need to set the initial uartclk here, since otherwise it will + * only ever be setup at sci_init() time. + */ +#if !defined(__H8300H__) && !defined(__H8300S__) + port->uartclk = current_cpu_data.module_clock * 16; +#else + port->uartclk = CONFIG_CPU_CLOCK; +#endif +#if defined(__H8300S__) + h8300_sci_enable(port, sci_enable); +#endif + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + ret = uart_set_options(port, co, baud, parity, bits, flow); +#if defined(__H8300H__) || defined(__H8300S__) + /* disable rx interrupt */ + if (ret == 0) + sci_stop_rx(port); +#endif + return ret; +} + +static struct console serial_console = { + .name = "ttySC", + .device = uart_console_device, + .write = serial_console_write, + .setup = serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sci_uart_driver, +}; + +static int __init sci_console_init(void) +{ + register_console(&serial_console); + return 0; +} + +console_initcall(sci_console_init); +#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */ + +#ifdef CONFIG_SH_KGDB +/* + * FIXME: Most of this can go away.. at the moment, we rely on + * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though + * most of that can easily be done here instead. + * + * For the time being, just accept the values that were parsed earlier.. + */ +static void __init kgdb_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + *baud = kgdb_baud; + *parity = tolower(kgdb_parity); + *bits = kgdb_bits - '0'; +} + +/* + * The naming here is somewhat misleading, since kgdb_console_setup() takes + * care of the early-on initialization for kgdb, regardless of whether we + * actually use kgdb as a console or not. + * + * On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense. + */ +int __init kgdb_console_setup(struct console *co, char *options) +{ + struct uart_port *port = &sci_ports[kgdb_portnum].port; + int baud = 38400; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= SCI_NPORTS || co->index != kgdb_portnum) + co->index = kgdb_portnum; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + kgdb_console_get_options(port, &baud, &parity, &bits); + + kgdb_getchar = kgdb_sci_getchar; + kgdb_putchar = kgdb_sci_putchar; + + return uart_set_options(port, co, baud, parity, bits, flow); +} +#endif /* CONFIG_SH_KGDB */ + +#ifdef CONFIG_SH_KGDB_CONSOLE +static struct console kgdb_console = { + .name = "ttySC", + .write = kgdb_console_write, + .setup = kgdb_console_setup, + .flags = CON_PRINTBUFFER | CON_ENABLED, + .index = -1, + .data = &sci_uart_driver, +}; + +/* Register the KGDB console so we get messages (d'oh!) */ +static int __init kgdb_console_init(void) +{ + register_console(&kgdb_console); + return 0; +} + +console_initcall(kgdb_console_init); +#endif /* CONFIG_SH_KGDB_CONSOLE */ + +#if defined(CONFIG_SH_KGDB_CONSOLE) +#define SCI_CONSOLE &kgdb_console +#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE) +#define SCI_CONSOLE &serial_console +#else +#define SCI_CONSOLE 0 +#endif + +static char banner[] __initdata = + KERN_INFO "SuperH SCI(F) driver initialized\n"; + +static struct uart_driver sci_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "sci", +#ifdef CONFIG_DEVFS_FS + .devfs_name = "ttsc/", +#endif + .dev_name = "ttySC", + .major = SCI_MAJOR, + .minor = SCI_MINOR_START, + .nr = SCI_NPORTS, + .cons = SCI_CONSOLE, +}; + +static int __init sci_init(void) +{ + int chan, ret; + + printk("%s", banner); + + ret = uart_register_driver(&sci_uart_driver); + if (ret == 0) { + for (chan = 0; chan < SCI_NPORTS; chan++) { + struct sci_port *sciport = &sci_ports[chan]; + +#if !defined(__H8300H__) && !defined(__H8300S__) + sciport->port.uartclk = (current_cpu_data.module_clock * 16); +#else + sciport->port.uartclk = CONFIG_CPU_CLOCK; +#endif + uart_add_one_port(&sci_uart_driver, &sciport->port); + sciport->break_timer.data = (unsigned long)sciport; + sciport->break_timer.function = sci_break_timer; + init_timer(&sciport->break_timer); + } + } + +#ifdef CONFIG_CPU_FREQ + cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); + printk("sci: CPU frequency notifier registered\n"); +#endif + +#ifdef CONFIG_SH_STANDARD_BIOS + sh_bios_gdb_detach(); +#endif + + return ret; +} + +static void __exit sci_exit(void) +{ + int chan; + + for (chan = 0; chan < SCI_NPORTS; chan++) + uart_remove_one_port(&sci_uart_driver, &sci_ports[chan].port); + + uart_unregister_driver(&sci_uart_driver); +} + +module_init(sci_init); +module_exit(sci_exit); + diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h new file mode 100644 index 000000000000..2892169eff05 --- /dev/null +++ b/drivers/serial/sh-sci.h @@ -0,0 +1,573 @@ +/* $Id: sh-sci.h,v 1.4 2004/02/19 16:43:56 lethal Exp $ + * + * linux/drivers/serial/sh-sci.h + * + * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2000 Greg Banks + * Copyright (C) 2002, 2003 Paul Mundt + * Modified to support multiple serial ports. Stuart Menefy (May 2000). + * Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003). + * Modified to support H8/300 Series Yoshinori Sato (Feb 2004). + */ +#include +#include + +#if defined(__H8300H__) || defined(__H8300S__) +#include +#if defined(CONFIG_H83007) || defined(CONFIG_H83068) +#include +#endif +#if defined(CONFIG_H8S2678) +#include +#endif +#endif + +/* Offsets into the sci_port->irqs array */ +#define SCIx_ERI_IRQ 0 +#define SCIx_RXI_IRQ 1 +#define SCIx_TXI_IRQ 2 + +/* ERI, RXI, TXI, BRI */ +#define SCI_IRQS { 23, 24, 25, 0 } +#define SH3_SCIF_IRQS { 56, 57, 59, 58 } +#define SH3_IRDA_IRQS { 52, 53, 55, 54 } +#define SH4_SCIF_IRQS { 40, 41, 43, 42 } +#define STB1_SCIF1_IRQS {23, 24, 26, 25 } +#define SH7760_SCIF0_IRQS { 52, 53, 55, 54 } +#define SH7760_SCIF1_IRQS { 72, 73, 75, 74 } +#define SH7760_SCIF2_IRQS { 76, 77, 79, 78 } +#define SH7300_SCIF0_IRQS {80, 80, 80, 80 } +#define SH73180_SCIF_IRQS {80, 81, 83, 82 } +#define H8300H_SCI_IRQS0 {52, 53, 54, 0 } +#define H8300H_SCI_IRQS1 {56, 57, 58, 0 } +#define H8300H_SCI_IRQS2 {60, 61, 62, 0 } +#define H8S_SCI_IRQS0 {88, 89, 90, 0 } +#define H8S_SCI_IRQS1 {92, 93, 94, 0 } +#define H8S_SCI_IRQS2 {96, 97, 98, 0 } +#define SH5_SCIF_IRQS {39, 40, 42, 0 } + +#if defined(CONFIG_CPU_SUBTYPE_SH7708) +# define SCI_NPORTS 1 +# define SCSPTR 0xffffff7c /* 8 bit */ +# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define SCI_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) +# define SCI_NPORTS 3 +# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ +# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ +# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define SCI_AND_SCIF +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) +# define SCIF0 0xA4400000 +# define SCIF2 0xA4410000 +# define SCSMR_Ir 0xA44A0000 +# define IRDA_SCIF SCIF0 +# define SCI_NPORTS 2 +# define SCPCR 0xA4000116 +# define SCPDR 0xA4000136 + +/* Set the clock source, + * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input + * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output + */ +# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 +# define SCIF_ONLY +#elif defined(CONFIG_SH_RTS7751R2D) +# define SCI_NPORTS 1 +# define SCSPTR1 0xffe0001c /* 8 bit SCI */ +# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) +# define SCI_NPORTS 2 +# define SCSPTR1 0xffe0001c /* 8 bit SCI */ +# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ + 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ + 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) +# define SCI_AND_SCIF +#elif defined(CONFIG_CPU_SUBTYPE_SH7760) +# define SCI_NPORTS 3 +# define SCSPTR0 0xfe600000 /* 16 bit SCIF */ +# define SCSPTR1 0xfe610000 /* 16 bit SCIF */ +# define SCSPTR2 0xfe620000 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH7300) +# define SCI_NPORTS 1 +# define SCPCR 0xA4050116 /* 16 bit SCIF */ +# define SCPDR 0xA4050136 /* 16 bit SCIF */ +# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH73180) +# define SCI_NPORTS 1 +# define SCPDR 0xA4050138 /* 16 bit SCIF */ +# define SCSPTR2 SCPDR +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) +# define SCI_NPORTS 1 +# define SCSPTR2 0xffe80020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) +# define SCI_NPORTS 2 +# define SCSPTR1 0xffe00020 /* 16 bit SCIF */ +# define SCSPTR2 0xffe80020 /* 16 bit SCIF */ +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) +# include +# define SCIF_BASE_ADDR 0x01030000 +# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR +# define SCIF_PTR2_OFFS 0x0000020 +# define SCIF_LSR2_OFFS 0x0000024 +# define SCI_NPORTS 1 +# define SCI_INIT { \ + { {}, PORT_SCIF, 0, \ + SH5_SCIF_IRQS, sci_init_pins_scif } \ +} +# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ +# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, + TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY +#elif defined(CONFIG_H83007) || defined(CONFIG_H83068) +# define SCI_NPORTS 3 +# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define SCI_ONLY +# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) +#elif defined(CONFIG_H8S2678) +# define SCI_NPORTS 3 +# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define SCI_ONLY +# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) +#else +# error CPU subtype not defined +#endif + +/* SCSCR */ +#define SCI_CTRL_FLAGS_TIE 0x80 /* all */ +#define SCI_CTRL_FLAGS_RIE 0x40 /* all */ +#define SCI_CTRL_FLAGS_TE 0x20 /* all */ +#define SCI_CTRL_FLAGS_RE 0x10 /* all */ +#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) +#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ +#else +#define SCI_CTRL_FLAGS_REIE 0 +#endif +/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_CTRL_FLAGS_CKE1 0x02 * all */ +/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */ + +/* SCxSR SCI */ +#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +#define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ +/* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ + +#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER) + +/* SCxSR SCIF */ +#define SCIF_ER 0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_TEND 0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_TDFE 0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_BRK 0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_FER 0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_PER 0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ +#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */ + +#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +#define SCIF_ORER 0x0200 +#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) +#define SCIF_RFDC_MASK 0x007f +#define SCIF_TXROOM_MAX 64 +#else +#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) +#define SCIF_RFDC_MASK 0x001f +#define SCIF_TXROOM_MAX 16 +#endif + +#if defined(SCI_ONLY) +# define SCxSR_TEND(port) SCI_TEND +# define SCxSR_ERRORS(port) SCI_ERRORS +# define SCxSR_RDxF(port) SCI_RDRF +# define SCxSR_TDxE(port) SCI_TDRE +# define SCxSR_ORER(port) SCI_ORER +# define SCxSR_FER(port) SCI_FER +# define SCxSR_PER(port) SCI_PER +# define SCxSR_BRK(port) 0x00 +# define SCxSR_RDxF_CLEAR(port) 0xbc +# define SCxSR_ERROR_CLEAR(port) 0xc4 +# define SCxSR_TDxE_CLEAR(port) 0x78 +# define SCxSR_BREAK_CLEAR(port) 0xc4 +#elif defined(SCIF_ONLY) +# define SCxSR_TEND(port) SCIF_TEND +# define SCxSR_ERRORS(port) SCIF_ERRORS +# define SCxSR_RDxF(port) SCIF_RDF +# define SCxSR_TDxE(port) SCIF_TDFE +#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +# define SCxSR_ORER(port) SCIF_ORER +#else +# define SCxSR_ORER(port) 0x0000 +#endif +# define SCxSR_FER(port) SCIF_FER +# define SCxSR_PER(port) SCIF_PER +# define SCxSR_BRK(port) SCIF_BRK +#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc) +# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73) +# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf) +# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3) +#else +/* SH7705 can also use this, clearing is same between 7705 and 7709 and 7300 */ +# define SCxSR_RDxF_CLEAR(port) 0x00fc +# define SCxSR_ERROR_CLEAR(port) 0x0073 +# define SCxSR_TDxE_CLEAR(port) 0x00df +# define SCxSR_BREAK_CLEAR(port) 0x00e3 +#endif +#else +# define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) +# define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) +# define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) +# define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) +# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000) +# define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) +# define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) +# define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) +# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) +# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) +# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) +# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3) +#endif + +/* SCFCR */ +#define SCFCR_RFRST 0x0002 +#define SCFCR_TFRST 0x0004 +#define SCFCR_TCRST 0x4000 +#define SCFCR_MCE 0x0008 + +#define SCI_MAJOR 204 +#define SCI_MINOR_START 8 + +/* Generic serial flags */ +#define SCI_RX_THROTTLE 0x0000001 + +#define SCI_MAGIC 0xbabeface + +/* + * Events are used to schedule things to happen at timer-interrupt + * time, instead of at rs interrupt time. + */ +#define SCI_EVENT_WRITE_WAKEUP 0 + +struct sci_port { + struct uart_port port; + int type; + unsigned char irqs[4]; /* ERI, RXI, TXI, BRI */ + void (*init_pins)(struct uart_port *port, unsigned int cflag); + int break_flag; + struct timer_list break_timer; +}; + +#define SCI_IN(size, offset) \ + unsigned int addr = port->mapbase + (offset); \ + if ((size) == 8) { \ + return ctrl_inb(addr); \ + } else { \ + return ctrl_inw(addr); \ + } +#define SCI_OUT(size, offset, value) \ + unsigned int addr = port->mapbase + (offset); \ + if ((size) == 8) { \ + ctrl_outb(value, addr); \ + } else { \ + ctrl_outw(value, addr); \ + } + +#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ + static inline unsigned int sci_##name##_in(struct uart_port *port) \ + { \ + if (port->type == PORT_SCI) { \ + SCI_IN(sci_size, sci_offset) \ + } else { \ + SCI_IN(scif_size, scif_offset); \ + } \ + } \ + static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ + { \ + if (port->type == PORT_SCI) { \ + SCI_OUT(sci_size, sci_offset, value) \ + } else { \ + SCI_OUT(scif_size, scif_offset, value); \ + } \ + } + +#define CPU_SCIF_FNS(name, scif_offset, scif_size) \ + static inline unsigned int sci_##name##_in(struct uart_port *port) \ + { \ + SCI_IN(scif_size, scif_offset); \ + } \ + static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ + { \ + SCI_OUT(scif_size, scif_offset, value); \ + } + +#define CPU_SCI_FNS(name, sci_offset, sci_size) \ + static inline unsigned int sci_##name##_in(struct uart_port* port) \ + { \ + SCI_IN(sci_size, sci_offset); \ + } \ + static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \ + { \ + SCI_OUT(sci_size, sci_offset, value); \ + } + +#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +#define SCIF_FNS(name, scif_offset, scif_size) \ + CPU_SCIF_FNS(name, scif_offset, scif_size) +#else +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size) +#endif +#elif defined(__H8300H__) || defined(__H8300S__) +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) +#else +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) +SCIF_FNS(SCSMR, 0x00, 16) +SCIF_FNS(SCBRR, 0x04, 8) +SCIF_FNS(SCSCR, 0x08, 16) +SCIF_FNS(SCTDSR, 0x0c, 8) +SCIF_FNS(SCFER, 0x10, 16) +SCIF_FNS(SCxSR, 0x14, 16) +SCIF_FNS(SCFCR, 0x18, 16) +SCIF_FNS(SCFDR, 0x1c, 16) +SCIF_FNS(SCxTDR, 0x20, 8) +SCIF_FNS(SCxRDR, 0x24, 8) +SCIF_FNS(SCLSR, 0x24, 16) +#else +/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/ +/* name off sz off sz off sz off sz off sz*/ +SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16, 0x00, 8) +SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8, 0x01, 8) +SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16, 0x02, 8) +SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8) +SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) +SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) +SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) +SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) +SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) +SCIF_FNS(SCLSR, 0, 0, 0x24, 16) +#endif +#define sci_in(port, reg) sci_##reg##_in(port) +#define sci_out(port, reg, value) sci_##reg##_out(port, value) + +/* H8/300 series SCI pins assignment */ +#if defined(__H8300H__) || defined(__H8300S__) +static const struct __attribute__((packed)) { + int port; /* GPIO port no */ + unsigned short rx,tx; /* GPIO bit no */ +} h8300_sci_pins[] = { +#if defined(CONFIG_H83007) || defined(CONFIG_H83068) + { /* SCI0 */ + .port = H8300_GPIO_P9, + .rx = H8300_GPIO_B2, + .tx = H8300_GPIO_B0, + }, + { /* SCI1 */ + .port = H8300_GPIO_P9, + .rx = H8300_GPIO_B3, + .tx = H8300_GPIO_B1, + }, + { /* SCI2 */ + .port = H8300_GPIO_PB, + .rx = H8300_GPIO_B7, + .tx = H8300_GPIO_B6, + } +#elif defined(CONFIG_H8S2678) + { /* SCI0 */ + .port = H8300_GPIO_P3, + .rx = H8300_GPIO_B2, + .tx = H8300_GPIO_B0, + }, + { /* SCI1 */ + .port = H8300_GPIO_P3, + .rx = H8300_GPIO_B3, + .tx = H8300_GPIO_B1, + }, + { /* SCI2 */ + .port = H8300_GPIO_P5, + .rx = H8300_GPIO_B1, + .tx = H8300_GPIO_B0, + } +#endif +}; +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7708) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xfffffe80) + return ctrl_inb(SCSPTR)&0x01 ? 1 : 0; /* SCI */ + return 1; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xfffffe80) + return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */ + if (port->mapbase == 0xa4000150) + return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xa4000140) + return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + return 1; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == SCIF0) + return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */ + if (port->mapbase == SCIF2) + return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ + return 1; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH4_202) +static inline int sci_rxd_in(struct uart_port *port) +{ +#ifndef SCIF_ONLY + if (port->mapbase == 0xffe00000) + return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ +#endif +#ifndef SCI_ONLY + if (port->mapbase == 0xffe80000) + return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ +#endif + return 1; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7760) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xfe600000) + return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xfe610000) + return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xfe620000) + return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ +} +#elif defined(CONFIG_CPU_SUBTYPE_SH7300) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xa4430000) + return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */ + return 1; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH73180) +static inline int sci_rxd_in(struct uart_port *port) +{ + return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */ +} +#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffe00000) + return ctrl_inw(SCSPTR1)&0x0001 ? 1 : 0; /* SCIF */ + else + return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ + +} +#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) +static inline int sci_rxd_in(struct uart_port *port) +{ + return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */ +} +#elif defined(__H8300H__) || defined(__H8300S__) +static inline int sci_rxd_in(struct uart_port *port) +{ + int ch = (port->mapbase - SMR0) >> 3; + return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0; +} +#endif + +/* + * Values for the BitRate Register (SCBRR) + * + * The values are actually divisors for a frequency which can + * be internal to the SH3 (14.7456MHz) or derived from an external + * clock source. This driver assumes the internal clock is used; + * to support using an external clock source, config options or + * possibly command-line options would need to be added. + * + * Also, to support speeds below 2400 (why?) the lower 2 bits of + * the SCSMR register would also need to be set to non-zero values. + * + * -- Greg Banks 27Feb2000 + * + * Answer: The SCBRR register is only eight bits, and the value in + * it gets larger with lower baud rates. At around 2400 (depending on + * the peripherial module clock) you run out of bits. However the + * lower two bits of SCSMR allow the module clock to be divided down, + * scaling the value which is needed in SCBRR. + * + * -- Stuart Menefy - 23 May 2000 + * + * I meant, why would anyone bother with bitrates below 2400. + * + * -- Greg Banks - 7Jul2000 + * + * You "speedist"! How will I use my 110bps ASR-33 teletype with paper + * tape reader as a console! + * + * -- Mitch Davis - 15 Jul 2000 + */ + +#define PCLK (current_cpu_data.module_clock) + +#if defined(CONFIG_CPU_SUBTYPE_SH7300) +#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(16*bps)-1) +#elif defined(CONFIG_CPU_SUBTYPE_SH7705) +#define SCBRR_VALUE(bps) (((PCLK*2)+16*bps)/(32*bps)-1) +#elif !defined(__H8300H__) && !defined(__H8300S__) +#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(32*bps)-1) +#else +#define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1) +#endif +#define BPS_2400 SCBRR_VALUE(2400) +#define BPS_4800 SCBRR_VALUE(4800) +#define BPS_9600 SCBRR_VALUE(9600) +#define BPS_19200 SCBRR_VALUE(19200) +#define BPS_38400 SCBRR_VALUE(38400) +#define BPS_57600 SCBRR_VALUE(57600) +#define BPS_115200 SCBRR_VALUE(115200) + diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c new file mode 100644 index 000000000000..ffaab9b90fd8 --- /dev/null +++ b/drivers/serial/sn_console.c @@ -0,0 +1,1124 @@ +/* + * C-Brick Serial Port (and console) driver for SGI Altix machines. + * + * This driver is NOT suitable for talking to the l1-controller for + * anything other than 'console activities' --- please use the l1 + * driver for that. + * + * + * Copyright (c) 2004-2005 Silicon Graphics, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane, + * Mountain View, CA 94043, or: + * + * http://www.sgi.com + * + * For further information regarding this notice, see: + * + * http://oss.sgi.com/projects/GenInfo/NoticeExplan + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for mdelay */ +#include +#include + +#include +#include +#include + +/* number of characters we can transmit to the SAL console at a time */ +#define SN_SAL_MAX_CHARS 120 + +/* 64K, when we're asynch, it must be at least printk's LOG_BUF_LEN to + * avoid losing chars, (always has to be a power of 2) */ +#define SN_SAL_BUFFER_SIZE (64 * (1 << 10)) + +#define SN_SAL_UART_FIFO_DEPTH 16 +#define SN_SAL_UART_FIFO_SPEED_CPS 9600/10 + +/* sn_transmit_chars() calling args */ +#define TRANSMIT_BUFFERED 0 +#define TRANSMIT_RAW 1 + +/* To use dynamic numbers only and not use the assigned major and minor, + * define the following.. */ + /* #define USE_DYNAMIC_MINOR 1 *//* use dynamic minor number */ +#define USE_DYNAMIC_MINOR 0 /* Don't rely on misc_register dynamic minor */ + +/* Device name we're using */ +#define DEVICE_NAME "ttySG" +#define DEVICE_NAME_DYNAMIC "ttySG0" /* need full name for misc_register */ +/* The major/minor we are using, ignored for USE_DYNAMIC_MINOR */ +#define DEVICE_MAJOR 204 +#define DEVICE_MINOR 40 + +#ifdef CONFIG_MAGIC_SYSRQ +static char sysrq_serial_str[] = "\eSYS"; +static char *sysrq_serial_ptr = sysrq_serial_str; +static unsigned long sysrq_requested; +#endif /* CONFIG_MAGIC_SYSRQ */ + +/* + * Port definition - this kinda drives it all + */ +struct sn_cons_port { + struct timer_list sc_timer; + struct uart_port sc_port; + struct sn_sal_ops { + int (*sal_puts_raw) (const char *s, int len); + int (*sal_puts) (const char *s, int len); + int (*sal_getc) (void); + int (*sal_input_pending) (void); + void (*sal_wakeup_transmit) (struct sn_cons_port *, int); + } *sc_ops; + unsigned long sc_interrupt_timeout; + int sc_is_asynch; +}; + +static struct sn_cons_port sal_console_port; +static int sn_process_input; + +/* Only used if USE_DYNAMIC_MINOR is set to 1 */ +static struct miscdevice misc; /* used with misc_register for dynamic */ + +extern void early_sn_setup(void); + +#undef DEBUG +#ifdef DEBUG +static int sn_debug_printf(const char *fmt, ...); +#define DPRINTF(x...) sn_debug_printf(x) +#else +#define DPRINTF(x...) do { } while (0) +#endif + +/* Prototypes */ +static int snt_hw_puts_raw(const char *, int); +static int snt_hw_puts_buffered(const char *, int); +static int snt_poll_getc(void); +static int snt_poll_input_pending(void); +static int snt_intr_getc(void); +static int snt_intr_input_pending(void); +static void sn_transmit_chars(struct sn_cons_port *, int); + +/* A table for polling: + */ +static struct sn_sal_ops poll_ops = { + .sal_puts_raw = snt_hw_puts_raw, + .sal_puts = snt_hw_puts_raw, + .sal_getc = snt_poll_getc, + .sal_input_pending = snt_poll_input_pending +}; + +/* A table for interrupts enabled */ +static struct sn_sal_ops intr_ops = { + .sal_puts_raw = snt_hw_puts_raw, + .sal_puts = snt_hw_puts_buffered, + .sal_getc = snt_intr_getc, + .sal_input_pending = snt_intr_input_pending, + .sal_wakeup_transmit = sn_transmit_chars +}; + +/* the console does output in two distinctly different ways: + * synchronous (raw) and asynchronous (buffered). initally, early_printk + * does synchronous output. any data written goes directly to the SAL + * to be output (incidentally, it is internally buffered by the SAL) + * after interrupts and timers are initialized and available for use, + * the console init code switches to asynchronous output. this is + * also the earliest opportunity to begin polling for console input. + * after console initialization, console output and tty (serial port) + * output is buffered and sent to the SAL asynchronously (either by + * timer callback or by UART interrupt) */ + +/* routines for running the console in polling mode */ + +/** + * snt_poll_getc - Get a character from the console in polling mode + * + */ +static int snt_poll_getc(void) +{ + int ch; + + ia64_sn_console_getc(&ch); + return ch; +} + +/** + * snt_poll_input_pending - Check if any input is waiting - polling mode. + * + */ +static int snt_poll_input_pending(void) +{ + int status, input; + + status = ia64_sn_console_check(&input); + return !status && input; +} + +/* routines for an interrupt driven console (normal) */ + +/** + * snt_intr_getc - Get a character from the console, interrupt mode + * + */ +static int snt_intr_getc(void) +{ + return ia64_sn_console_readc(); +} + +/** + * snt_intr_input_pending - Check if input is pending, interrupt mode + * + */ +static int snt_intr_input_pending(void) +{ + return ia64_sn_console_intr_status() & SAL_CONSOLE_INTR_RECV; +} + +/* these functions are polled and interrupt */ + +/** + * snt_hw_puts_raw - Send raw string to the console, polled or interrupt mode + * @s: String + * @len: Length + * + */ +static int snt_hw_puts_raw(const char *s, int len) +{ + /* this will call the PROM and not return until this is done */ + return ia64_sn_console_putb(s, len); +} + +/** + * snt_hw_puts_buffered - Send string to console, polled or interrupt mode + * @s: String + * @len: Length + * + */ +static int snt_hw_puts_buffered(const char *s, int len) +{ + /* queue data to the PROM */ + return ia64_sn_console_xmit_chars((char *)s, len); +} + +/* uart interface structs + * These functions are associated with the uart_port that the serial core + * infrastructure calls. + * + * Note: Due to how the console works, many routines are no-ops. + */ + +/** + * snp_type - What type of console are we? + * @port: Port to operate with (we ignore since we only have one port) + * + */ +static const char *snp_type(struct uart_port *port) +{ + return ("SGI SN L1"); +} + +/** + * snp_tx_empty - Is the transmitter empty? We pretend we're always empty + * @port: Port to operate on (we ignore since we only have one port) + * + */ +static unsigned int snp_tx_empty(struct uart_port *port) +{ + return 1; +} + +/** + * snp_stop_tx - stop the transmitter - no-op for us + * @port: Port to operat eon - we ignore - no-op function + * @tty_stop: Set to 1 if called via uart_stop + * + */ +static void snp_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ +} + +/** + * snp_release_port - Free i/o and resources for port - no-op for us + * @port: Port to operate on - we ignore - no-op function + * + */ +static void snp_release_port(struct uart_port *port) +{ +} + +/** + * snp_enable_ms - Force modem status interrupts on - no-op for us + * @port: Port to operate on - we ignore - no-op function + * + */ +static void snp_enable_ms(struct uart_port *port) +{ +} + +/** + * snp_shutdown - shut down the port - free irq and disable - no-op for us + * @port: Port to shut down - we ignore + * + */ +static void snp_shutdown(struct uart_port *port) +{ +} + +/** + * snp_set_mctrl - set control lines (dtr, rts, etc) - no-op for our console + * @port: Port to operate on - we ignore + * @mctrl: Lines to set/unset - we ignore + * + */ +static void snp_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +/** + * snp_get_mctrl - get contorl line info, we just return a static value + * @port: port to operate on - we only have one port so we ignore this + * + */ +static unsigned int snp_get_mctrl(struct uart_port *port) +{ + return TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS; +} + +/** + * snp_stop_rx - Stop the receiver - we ignor ethis + * @port: Port to operate on - we ignore + * + */ +static void snp_stop_rx(struct uart_port *port) +{ +} + +/** + * snp_start_tx - Start transmitter + * @port: Port to operate on + * @tty_stop: Set to 1 if called via uart_start + * + */ +static void snp_start_tx(struct uart_port *port, unsigned int tty_stop) +{ + if (sal_console_port.sc_ops->sal_wakeup_transmit) + sal_console_port.sc_ops->sal_wakeup_transmit(&sal_console_port, + TRANSMIT_BUFFERED); + +} + +/** + * snp_break_ctl - handle breaks - ignored by us + * @port: Port to operate on + * @break_state: Break state + * + */ +static void snp_break_ctl(struct uart_port *port, int break_state) +{ +} + +/** + * snp_startup - Start up the serial port - always return 0 (We're always on) + * @port: Port to operate on + * + */ +static int snp_startup(struct uart_port *port) +{ + return 0; +} + +/** + * snp_set_termios - set termios stuff - we ignore these + * @port: port to operate on + * @termios: New settings + * @termios: Old + * + */ +static void +snp_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ +} + +/** + * snp_request_port - allocate resources for port - ignored by us + * @port: port to operate on + * + */ +static int snp_request_port(struct uart_port *port) +{ + return 0; +} + +/** + * snp_config_port - allocate resources, set up - we ignore, we're always on + * @port: Port to operate on + * @flags: flags used for port setup + * + */ +static void snp_config_port(struct uart_port *port, int flags) +{ +} + +/* Associate the uart functions above - given to serial core */ + +static struct uart_ops sn_console_ops = { + .tx_empty = snp_tx_empty, + .set_mctrl = snp_set_mctrl, + .get_mctrl = snp_get_mctrl, + .stop_tx = snp_stop_tx, + .start_tx = snp_start_tx, + .stop_rx = snp_stop_rx, + .enable_ms = snp_enable_ms, + .break_ctl = snp_break_ctl, + .startup = snp_startup, + .shutdown = snp_shutdown, + .set_termios = snp_set_termios, + .pm = NULL, + .type = snp_type, + .release_port = snp_release_port, + .request_port = snp_request_port, + .config_port = snp_config_port, + .verify_port = NULL, +}; + +/* End of uart struct functions and defines */ + +#ifdef DEBUG + +/** + * sn_debug_printf - close to hardware debugging printf + * @fmt: printf format + * + * This is as "close to the metal" as we can get, used when the driver + * itself may be broken. + * + */ +static int sn_debug_printf(const char *fmt, ...) +{ + static char printk_buf[1024]; + int printed_len; + va_list args; + + va_start(args, fmt); + printed_len = vsnprintf(printk_buf, sizeof(printk_buf), fmt, args); + + if (!sal_console_port.sc_ops) { + sal_console_port.sc_ops = &poll_ops; + early_sn_setup(); + } + sal_console_port.sc_ops->sal_puts_raw(printk_buf, printed_len); + + va_end(args); + return printed_len; +} +#endif /* DEBUG */ + +/* + * Interrupt handling routines. + */ + +/** + * sn_receive_chars - Grab characters, pass them to tty layer + * @port: Port to operate on + * @regs: Saved registers (needed by uart_handle_sysrq_char) + * @flags: irq flags + * + * Note: If we're not registered with the serial core infrastructure yet, + * we don't try to send characters to it... + * + */ +static void +sn_receive_chars(struct sn_cons_port *port, struct pt_regs *regs, + unsigned long flags) +{ + int ch; + struct tty_struct *tty; + + if (!port) { + printk(KERN_ERR "sn_receive_chars - port NULL so can't receieve\n"); + return; + } + + if (!port->sc_ops) { + printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receieve\n"); + return; + } + + if (port->sc_port.info) { + /* The serial_core stuffs are initilized, use them */ + tty = port->sc_port.info->tty; + } + else { + /* Not registered yet - can't pass to tty layer. */ + tty = NULL; + } + + while (port->sc_ops->sal_input_pending()) { + ch = port->sc_ops->sal_getc(); + if (ch < 0) { + printk(KERN_ERR "sn_console: An error occured while " + "obtaining data from the console (0x%0x)\n", ch); + break; + } +#ifdef CONFIG_MAGIC_SYSRQ + if (sysrq_requested) { + unsigned long sysrq_timeout = sysrq_requested + HZ*5; + + sysrq_requested = 0; + if (ch && time_before(jiffies, sysrq_timeout)) { + spin_unlock_irqrestore(&port->sc_port.lock, flags); + handle_sysrq(ch, regs, NULL); + spin_lock_irqsave(&port->sc_port.lock, flags); + /* ignore actual sysrq command char */ + continue; + } + } + if (ch == *sysrq_serial_ptr) { + if (!(*++sysrq_serial_ptr)) { + sysrq_requested = jiffies; + sysrq_serial_ptr = sysrq_serial_str; + } + /* + * ignore the whole sysrq string except for the + * leading escape + */ + if (ch != '\e') + continue; + } + else + sysrq_serial_ptr = sysrq_serial_str; +#endif /* CONFIG_MAGIC_SYSRQ */ + + /* record the character to pass up to the tty layer */ + if (tty) { + *tty->flip.char_buf_ptr = ch; + *tty->flip.flag_buf_ptr = TTY_NORMAL; + tty->flip.char_buf_ptr++; + tty->flip.count++; + if (tty->flip.count == TTY_FLIPBUF_SIZE) + break; + } + port->sc_port.icount.rx++; + } + + if (tty) + tty_flip_buffer_push(tty); +} + +/** + * sn_transmit_chars - grab characters from serial core, send off + * @port: Port to operate on + * @raw: Transmit raw or buffered + * + * Note: If we're early, before we're registered with serial core, the + * writes are going through sn_sal_console_write because that's how + * register_console has been set up. We currently could have asynch + * polls calling this function due to sn_sal_switch_to_asynch but we can + * ignore them until we register with the serial core stuffs. + * + */ +static void sn_transmit_chars(struct sn_cons_port *port, int raw) +{ + int xmit_count, tail, head, loops, ii; + int result; + char *start; + struct circ_buf *xmit; + + if (!port) + return; + + BUG_ON(!port->sc_is_asynch); + + if (port->sc_port.info) { + /* We're initilized, using serial core infrastructure */ + xmit = &port->sc_port.info->xmit; + } else { + /* Probably sn_sal_switch_to_asynch has been run but serial core isn't + * initilized yet. Just return. Writes are going through + * sn_sal_console_write (due to register_console) at this time. + */ + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&port->sc_port)) { + /* Nothing to do. */ + return; + } + + head = xmit->head; + tail = xmit->tail; + start = &xmit->buf[tail]; + + /* twice around gets the tail to the end of the buffer and + * then to the head, if needed */ + loops = (head < tail) ? 2 : 1; + + for (ii = 0; ii < loops; ii++) { + xmit_count = (head < tail) ? + (UART_XMIT_SIZE - tail) : (head - tail); + + if (xmit_count > 0) { + if (raw == TRANSMIT_RAW) + result = + port->sc_ops->sal_puts_raw(start, + xmit_count); + else + result = + port->sc_ops->sal_puts(start, xmit_count); +#ifdef DEBUG + if (!result) + DPRINTF("`"); +#endif + if (result > 0) { + xmit_count -= result; + port->sc_port.icount.tx += result; + tail += result; + tail &= UART_XMIT_SIZE - 1; + xmit->tail = tail; + start = &xmit->buf[tail]; + } + } + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&port->sc_port); + + if (uart_circ_empty(xmit)) + snp_stop_tx(&port->sc_port, 0); /* no-op for us */ +} + +/** + * sn_sal_interrupt - Handle console interrupts + * @irq: irq #, useful for debug statements + * @dev_id: our pointer to our port (sn_cons_port which contains the uart port) + * @regs: Saved registers, used by sn_receive_chars for uart_handle_sysrq_char + * + */ +static irqreturn_t sn_sal_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct sn_cons_port *port = (struct sn_cons_port *)dev_id; + unsigned long flags; + int status = ia64_sn_console_intr_status(); + + if (!port) + return IRQ_NONE; + + spin_lock_irqsave(&port->sc_port.lock, flags); + if (status & SAL_CONSOLE_INTR_RECV) { + sn_receive_chars(port, regs, flags); + } + if (status & SAL_CONSOLE_INTR_XMIT) { + sn_transmit_chars(port, TRANSMIT_BUFFERED); + } + spin_unlock_irqrestore(&port->sc_port.lock, flags); + return IRQ_HANDLED; +} + +/** + * sn_sal_connect_interrupt - Request interrupt, handled by sn_sal_interrupt + * @port: Our sn_cons_port (which contains the uart port) + * + * returns the console irq if interrupt is successfully registered, else 0 + * + */ +static int sn_sal_connect_interrupt(struct sn_cons_port *port) +{ + if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt, + SA_INTERRUPT | SA_SHIRQ, + "SAL console driver", port) >= 0) { + return SGI_UART_VECTOR; + } + + printk(KERN_INFO "sn_console: console proceeding in polled mode\n"); + return 0; +} + +/** + * sn_sal_timer_poll - this function handles polled console mode + * @data: A pointer to our sn_cons_port (which contains the uart port) + * + * data is the pointer that init_timer will store for us. This function is + * associated with init_timer to see if there is any console traffic. + * Obviously not used in interrupt mode + * + */ +static void sn_sal_timer_poll(unsigned long data) +{ + struct sn_cons_port *port = (struct sn_cons_port *)data; + unsigned long flags; + + if (!port) + return; + + if (!port->sc_port.irq) { + spin_lock_irqsave(&port->sc_port.lock, flags); + if (sn_process_input) + sn_receive_chars(port, NULL, flags); + sn_transmit_chars(port, TRANSMIT_RAW); + spin_unlock_irqrestore(&port->sc_port.lock, flags); + mod_timer(&port->sc_timer, + jiffies + port->sc_interrupt_timeout); + } +} + +/* + * Boot-time initialization code + */ + +/** + * sn_sal_switch_to_asynch - Switch to async mode (as opposed to synch) + * @port: Our sn_cons_port (which contains the uart port) + * + * So this is used by sn_sal_serial_console_init (early on, before we're + * registered with serial core). It's also used by sn_sal_module_init + * right after we've registered with serial core. The later only happens + * if we didn't already come through here via sn_sal_serial_console_init. + * + */ +static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port) +{ + unsigned long flags; + + if (!port) + return; + + DPRINTF("sn_console: about to switch to asynchronous console\n"); + + /* without early_printk, we may be invoked late enough to race + * with other cpus doing console IO at this point, however + * console interrupts will never be enabled */ + spin_lock_irqsave(&port->sc_port.lock, flags); + + /* early_printk invocation may have done this for us */ + if (!port->sc_ops) + port->sc_ops = &poll_ops; + + /* we can't turn on the console interrupt (as request_irq + * calls kmalloc, which isn't set up yet), so we rely on a + * timer to poll for input and push data from the console + * buffer. + */ + init_timer(&port->sc_timer); + port->sc_timer.function = sn_sal_timer_poll; + port->sc_timer.data = (unsigned long)port; + + if (IS_RUNNING_ON_SIMULATOR()) + port->sc_interrupt_timeout = 6; + else { + /* 960cps / 16 char FIFO = 60HZ + * HZ / (SN_SAL_FIFO_SPEED_CPS / SN_SAL_FIFO_DEPTH) */ + port->sc_interrupt_timeout = + HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS; + } + mod_timer(&port->sc_timer, jiffies + port->sc_interrupt_timeout); + + port->sc_is_asynch = 1; + spin_unlock_irqrestore(&port->sc_port.lock, flags); +} + +/** + * sn_sal_switch_to_interrupts - Switch to interrupt driven mode + * @port: Our sn_cons_port (which contains the uart port) + * + * In sn_sal_module_init, after we're registered with serial core and + * the port is added, this function is called to switch us to interrupt + * mode. We were previously in asynch/polling mode (using init_timer). + * + * We attempt to switch to interrupt mode here by calling + * sn_sal_connect_interrupt. If that works out, we enable receive interrupts. + */ +static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port) +{ + int irq; + unsigned long flags; + + if (!port) + return; + + DPRINTF("sn_console: switching to interrupt driven console\n"); + + spin_lock_irqsave(&port->sc_port.lock, flags); + + irq = sn_sal_connect_interrupt(port); + + if (irq) { + port->sc_port.irq = irq; + port->sc_ops = &intr_ops; + + /* turn on receive interrupts */ + ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV); + } + spin_unlock_irqrestore(&port->sc_port.lock, flags); +} + +/* + * Kernel console definitions + */ + +static void sn_sal_console_write(struct console *, const char *, unsigned); +static int __init sn_sal_console_setup(struct console *, char *); +extern struct uart_driver sal_console_uart; +extern struct tty_driver *uart_console_device(struct console *, int *); + +static struct console sal_console = { + .name = DEVICE_NAME, + .write = sn_sal_console_write, + .device = uart_console_device, + .setup = sn_sal_console_setup, + .index = -1, /* unspecified */ + .data = &sal_console_uart, +}; + +#define SAL_CONSOLE &sal_console + +struct uart_driver sal_console_uart = { + .owner = THIS_MODULE, + .driver_name = "sn_console", + .dev_name = DEVICE_NAME, + .major = 0, /* major/minor set at registration time per USE_DYNAMIC_MINOR */ + .minor = 0, + .nr = 1, /* one port */ + .cons = SAL_CONSOLE, +}; + +/** + * sn_sal_module_init - When the kernel loads us, get us rolling w/ serial core + * + * Before this is called, we've been printing kernel messages in a special + * early mode not making use of the serial core infrastructure. When our + * driver is loaded for real, we register the driver and port with serial + * core and try to enable interrupt driven mode. + * + */ +static int __init sn_sal_module_init(void) +{ + int retval; + + if (!ia64_platform_is("sn2")) + return -ENODEV; + + printk(KERN_INFO "sn_console: Console driver init\n"); + + if (USE_DYNAMIC_MINOR == 1) { + misc.minor = MISC_DYNAMIC_MINOR; + misc.name = DEVICE_NAME_DYNAMIC; + retval = misc_register(&misc); + if (retval != 0) { + printk + ("Failed to register console device using misc_register.\n"); + return -ENODEV; + } + sal_console_uart.major = MISC_MAJOR; + sal_console_uart.minor = misc.minor; + } else { + sal_console_uart.major = DEVICE_MAJOR; + sal_console_uart.minor = DEVICE_MINOR; + } + + /* We register the driver and the port before switching to interrupts + * or async above so the proper uart structures are populated */ + + if (uart_register_driver(&sal_console_uart) < 0) { + printk + ("ERROR sn_sal_module_init failed uart_register_driver, line %d\n", + __LINE__); + return -ENODEV; + } + + spin_lock_init(&sal_console_port.sc_port.lock); + + /* Setup the port struct with the minimum needed */ + sal_console_port.sc_port.membase = (char *)1; /* just needs to be non-zero */ + sal_console_port.sc_port.type = PORT_16550A; + sal_console_port.sc_port.fifosize = SN_SAL_MAX_CHARS; + sal_console_port.sc_port.ops = &sn_console_ops; + sal_console_port.sc_port.line = 0; + + if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) { + /* error - not sure what I'd do - so I'll do nothing */ + printk(KERN_ERR "%s: unable to add port\n", __FUNCTION__); + } + + /* when this driver is compiled in, the console initialization + * will have already switched us into asynchronous operation + * before we get here through the module initcalls */ + if (!sal_console_port.sc_is_asynch) { + sn_sal_switch_to_asynch(&sal_console_port); + } + + /* at this point (module_init) we can try to turn on interrupts */ + if (!IS_RUNNING_ON_SIMULATOR()) { + sn_sal_switch_to_interrupts(&sal_console_port); + } + sn_process_input = 1; + return 0; +} + +/** + * sn_sal_module_exit - When we're unloaded, remove the driver/port + * + */ +static void __exit sn_sal_module_exit(void) +{ + del_timer_sync(&sal_console_port.sc_timer); + uart_remove_one_port(&sal_console_uart, &sal_console_port.sc_port); + uart_unregister_driver(&sal_console_uart); + misc_deregister(&misc); +} + +module_init(sn_sal_module_init); +module_exit(sn_sal_module_exit); + +/** + * puts_raw_fixed - sn_sal_console_write helper for adding \r's as required + * @puts_raw : puts function to do the writing + * @s: input string + * @count: length + * + * We need a \r ahead of every \n for direct writes through + * ia64_sn_console_putb (what sal_puts_raw below actually does). + * + */ + +static void puts_raw_fixed(int (*puts_raw) (const char *s, int len), + const char *s, int count) +{ + const char *s1; + + /* Output '\r' before each '\n' */ + while ((s1 = memchr(s, '\n', count)) != NULL) { + puts_raw(s, s1 - s); + puts_raw("\r\n", 2); + count -= s1 + 1 - s; + s = s1 + 1; + } + puts_raw(s, count); +} + +/** + * sn_sal_console_write - Print statements before serial core available + * @console: Console to operate on - we ignore since we have just one + * @s: String to send + * @count: length + * + * This is referenced in the console struct. It is used for early + * console printing before we register with serial core and for things + * such as kdb. The console_lock must be held when we get here. + * + * This function has some code for trying to print output even if the lock + * is held. We try to cover the case where a lock holder could have died. + * We don't use this special case code if we're not registered with serial + * core yet. After we're registered with serial core, the only time this + * function would be used is for high level kernel output like magic sys req, + * kdb, and printk's. + */ +static void +sn_sal_console_write(struct console *co, const char *s, unsigned count) +{ + unsigned long flags = 0; + struct sn_cons_port *port = &sal_console_port; +#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT) + static int stole_lock = 0; +#endif + + BUG_ON(!port->sc_is_asynch); + + /* We can't look at the xmit buffer if we're not registered with serial core + * yet. So only do the fancy recovery after registering + */ + if (port->sc_port.info) { + + /* somebody really wants this output, might be an + * oops, kdb, panic, etc. make sure they get it. */ +#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT) + if (spin_is_locked(&port->sc_port.lock)) { + int lhead = port->sc_port.info->xmit.head; + int ltail = port->sc_port.info->xmit.tail; + int counter, got_lock = 0; + + /* + * We attempt to determine if someone has died with the + * lock. We wait ~20 secs after the head and tail ptrs + * stop moving and assume the lock holder is not functional + * and plow ahead. If the lock is freed within the time out + * period we re-get the lock and go ahead normally. We also + * remember if we have plowed ahead so that we don't have + * to wait out the time out period again - the asumption + * is that we will time out again. + */ + + for (counter = 0; counter < 150; mdelay(125), counter++) { + if (!spin_is_locked(&port->sc_port.lock) + || stole_lock) { + if (!stole_lock) { + spin_lock_irqsave(&port-> + sc_port.lock, + flags); + got_lock = 1; + } + break; + } else { + /* still locked */ + if ((lhead != + port->sc_port.info->xmit.head) + || (ltail != + port->sc_port.info->xmit. + tail)) { + lhead = + port->sc_port.info->xmit. + head; + ltail = + port->sc_port.info->xmit. + tail; + counter = 0; + } + } + } + /* flush anything in the serial core xmit buffer, raw */ + sn_transmit_chars(port, 1); + if (got_lock) { + spin_unlock_irqrestore(&port->sc_port.lock, + flags); + stole_lock = 0; + } else { + /* fell thru */ + stole_lock = 1; + } + puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); + } else { + stole_lock = 0; +#endif + spin_lock_irqsave(&port->sc_port.lock, flags); + sn_transmit_chars(port, 1); + spin_unlock_irqrestore(&port->sc_port.lock, flags); + + puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); +#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT) + } +#endif + } + else { + /* Not yet registered with serial core - simple case */ + puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count); + } +} + + +/** + * sn_sal_console_setup - Set up console for early printing + * @co: Console to work with + * @options: Options to set + * + * Altix console doesn't do anything with baud rates, etc, anyway. + * + * This isn't required since not providing the setup function in the + * console struct is ok. However, other patches like KDB plop something + * here so providing it is easier. + * + */ +static int __init sn_sal_console_setup(struct console *co, char *options) +{ + return 0; +} + +/** + * sn_sal_console_write_early - simple early output routine + * @co - console struct + * @s - string to print + * @count - count + * + * Simple function to provide early output, before even + * sn_sal_serial_console_init is called. Referenced in the + * console struct registerd in sn_serial_console_early_setup. + * + */ +static void __init +sn_sal_console_write_early(struct console *co, const char *s, unsigned count) +{ + puts_raw_fixed(sal_console_port.sc_ops->sal_puts_raw, s, count); +} + +/* Used for very early console printing - again, before + * sn_sal_serial_console_init is run */ +static struct console sal_console_early __initdata = { + .name = "sn_sal", + .write = sn_sal_console_write_early, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +/** + * sn_serial_console_early_setup - Sets up early console output support + * + * Register a console early on... This is for output before even + * sn_sal_serial_cosnole_init is called. This function is called from + * setup.c. This allows us to do really early polled writes. When + * sn_sal_serial_console_init is called, this console is unregistered + * and a new one registered. + */ +int __init sn_serial_console_early_setup(void) +{ + if (!ia64_platform_is("sn2")) + return -1; + + sal_console_port.sc_ops = &poll_ops; + early_sn_setup(); /* Find SAL entry points */ + register_console(&sal_console_early); + + return 0; +} + +/** + * sn_sal_serial_console_init - Early console output - set up for register + * + * This function is called when regular console init happens. Because we + * support even earlier console output with sn_serial_console_early_setup + * (called from setup.c directly), this function unregisters the really + * early console. + * + * Note: Even if setup.c doesn't register sal_console_early, unregistering + * it here doesn't hurt anything. + * + */ +static int __init sn_sal_serial_console_init(void) +{ + if (ia64_platform_is("sn2")) { + sn_sal_switch_to_asynch(&sal_console_port); + DPRINTF("sn_sal_serial_console_init : register console\n"); + register_console(&sal_console); + unregister_console(&sal_console_early); + } + return 0; +} + +console_initcall(sn_sal_serial_console_init); diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c new file mode 100644 index 000000000000..5fc4a62173d9 --- /dev/null +++ b/drivers/serial/suncore.c @@ -0,0 +1,218 @@ +/* suncore.c + * + * Common SUN serial routines. Based entirely + * upon drivers/sbus/char/sunserial.c which is: + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * + * Adaptation to new UART layer is: + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "suncore.h" + +int sunserial_current_minor = 64; + +EXPORT_SYMBOL(sunserial_current_minor); + +void +sunserial_console_termios(struct console *con) +{ + char mode[16], buf[16], *s; + char *mode_prop = "ttyX-mode"; + char *cd_prop = "ttyX-ignore-cd"; + char *dtr_prop = "ttyX-rts-dtr-off"; + int baud, bits, stop, cflag; + char parity; + int carrier = 0; + int rtsdtr = 1; + int topnd, nd; + + if (!serial_console) + return; + + if (serial_console == 1) { + mode_prop[3] = 'a'; + cd_prop[3] = 'a'; + dtr_prop[3] = 'a'; + } else { + mode_prop[3] = 'b'; + cd_prop[3] = 'b'; + dtr_prop[3] = 'b'; + } + + topnd = prom_getchild(prom_root_node); + nd = prom_searchsiblings(topnd, "options"); + if (!nd) { + strcpy(mode, "9600,8,n,1,-"); + goto no_options; + } + + if (!prom_node_has_property(nd, mode_prop)) { + strcpy(mode, "9600,8,n,1,-"); + goto no_options; + } + + memset(mode, 0, sizeof(mode)); + prom_getstring(nd, mode_prop, mode, sizeof(mode)); + + if (prom_node_has_property(nd, cd_prop)) { + memset(buf, 0, sizeof(buf)); + prom_getstring(nd, cd_prop, buf, sizeof(buf)); + if (!strcmp(buf, "false")) + carrier = 1; + + /* XXX: this is unused below. */ + } + + if (prom_node_has_property(nd, dtr_prop)) { + memset(buf, 0, sizeof(buf)); + prom_getstring(nd, dtr_prop, buf, sizeof(buf)); + if (!strcmp(buf, "false")) + rtsdtr = 0; + + /* XXX: this is unused below. */ + } + +no_options: + cflag = CREAD | HUPCL | CLOCAL; + + s = mode; + baud = simple_strtoul(s, NULL, 0); + s = strchr(s, ','); + bits = simple_strtoul(++s, NULL, 0); + s = strchr(s, ','); + parity = *(++s); + s = strchr(s, ','); + stop = simple_strtoul(++s, NULL, 0); + s = strchr(s, ','); + /* XXX handshake is not handled here. */ + + switch (baud) { + case 150: cflag |= B150; break; + case 300: cflag |= B300; break; + case 600: cflag |= B600; break; + case 1200: cflag |= B1200; break; + case 2400: cflag |= B2400; break; + case 4800: cflag |= B4800; break; + case 9600: cflag |= B9600; break; + case 19200: cflag |= B19200; break; + case 38400: cflag |= B38400; break; + default: baud = 9600; cflag |= B9600; break; + } + + switch (bits) { + case 5: cflag |= CS5; break; + case 6: cflag |= CS6; break; + case 7: cflag |= CS7; break; + case 8: cflag |= CS8; break; + default: cflag |= CS8; break; + } + + switch (parity) { + case 'o': cflag |= (PARENB | PARODD); break; + case 'e': cflag |= PARENB; break; + case 'n': default: break; + } + + switch (stop) { + case 2: cflag |= CSTOPB; break; + case 1: default: break; + } + + con->cflag = cflag; +} + +EXPORT_SYMBOL(sunserial_console_termios); + +/* Sun serial MOUSE auto baud rate detection. */ +static struct mouse_baud_cflag { + int baud; + unsigned int cflag; +} mouse_baud_table[] = { + { 1200, B1200 }, + { 2400, B2400 }, + { 4800, B4800 }, + { 9600, B9600 }, + { -1, ~0 }, + { -1, ~0 }, +}; + +unsigned int suncore_mouse_baud_cflag_next(unsigned int cflag, int *new_baud) +{ + int i; + + for (i = 0; mouse_baud_table[i].baud != -1; i++) + if (mouse_baud_table[i].cflag == (cflag & CBAUD)) + break; + + i += 1; + if (mouse_baud_table[i].baud == -1) + i = 0; + + *new_baud = mouse_baud_table[i].baud; + return mouse_baud_table[i].cflag; +} + +EXPORT_SYMBOL(suncore_mouse_baud_cflag_next); + +/* Basically, when the baud rate is wrong the mouse spits out + * breaks to us. + */ +int suncore_mouse_baud_detection(unsigned char ch, int is_break) +{ + static int mouse_got_break = 0; + static int ctr = 0; + + if (is_break) { + /* Let a few normal bytes go by before we jump the gun + * and say we need to try another baud rate. + */ + if (mouse_got_break && ctr < 8) + return 1; + + /* Ok, we need to try another baud. */ + ctr = 0; + mouse_got_break = 1; + return 2; + } + if (mouse_got_break) { + ctr++; + if (ch == 0x87) { + /* Correct baud rate determined. */ + mouse_got_break = 0; + } + return 1; + } + return 0; +} + +EXPORT_SYMBOL(suncore_mouse_baud_detection); + +static int __init suncore_init(void) +{ + return 0; +} + +static void __exit suncore_exit(void) +{ +} + +module_init(suncore_init); +module_exit(suncore_exit); + +MODULE_AUTHOR("Eddie C. Dost, David S. Miller"); +MODULE_DESCRIPTION("Sun serial common layer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h new file mode 100644 index 000000000000..513916a8ce37 --- /dev/null +++ b/drivers/serial/suncore.h @@ -0,0 +1,29 @@ +/* suncore.h + * + * Generic SUN serial/kbd/ms layer. Based entirely + * upon drivers/sbus/char/sunserial.h which is: + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * + * Port to new UART layer is: + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#ifndef _SERIAL_SUN_H +#define _SERIAL_SUN_H + +/* Serial keyboard defines for L1-A processing... */ +#define SUNKBD_RESET 0xff +#define SUNKBD_L1 0x01 +#define SUNKBD_UP 0x80 +#define SUNKBD_A 0x4d + +extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *); +extern int suncore_mouse_baud_detection(unsigned char, int); + +extern int sunserial_current_minor; + +extern void sunserial_console_termios(struct console *); + +#endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c new file mode 100644 index 000000000000..8caaf2e5e47c --- /dev/null +++ b/drivers/serial/sunsab.c @@ -0,0 +1,1171 @@ +/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC. + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + * + * Rewrote buffer handling to use CIRC(Circular Buffer) macros. + * Maxim Krasnyanskiy + * + * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud + * rates to be programmed into the UART. Also eliminated a lot of + * duplicated code in the console setup. + * Theodore Ts'o , 2001-Oct-12 + * + * Ported to new 2.5.x UART layer. + * David S. Miller + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" +#include "sunsab.h" + +struct uart_sunsab_port { + struct uart_port port; /* Generic UART port */ + union sab82532_async_regs __iomem *regs; /* Chip registers */ + unsigned long irqflags; /* IRQ state flags */ + int dsr; /* Current DSR state */ + unsigned int cec_timeout; /* Chip poll timeout... */ + unsigned int tec_timeout; /* likewise */ + unsigned char interrupt_mask0;/* ISR0 masking */ + unsigned char interrupt_mask1;/* ISR1 masking */ + unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */ + unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */ + int type; /* SAB82532 version */ +}; + +/* + * This assumes you have a 29.4912 MHz clock for your UART. + */ +#define SAB_BASE_BAUD ( 29491200 / 16 ) + +static char *sab82532_version[16] = { + "V1.0", "V2.0", "V3.2", "V(0x03)", + "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)", + "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)", + "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)" +}; + +#define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */ +#define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */ + +#define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */ +#define SAB82532_XMIT_FIFO_SIZE 32 + +static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up) +{ + int timeout = up->tec_timeout; + + while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout) + udelay(1); +} + +static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up) +{ + int timeout = up->cec_timeout; + + while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout) + udelay(1); +} + +static struct tty_struct * +receive_chars(struct uart_sunsab_port *up, + union sab82532_irq_status *stat, + struct pt_regs *regs) +{ + struct tty_struct *tty = NULL; + unsigned char buf[32]; + int saw_console_brk = 0; + int free_fifo = 0; + int count = 0; + int i; + + if (up->port.info != NULL) /* Unopened serial console */ + tty = up->port.info->tty; + + /* Read number of BYTES (Character + Status) available. */ + if (stat->sreg.isr0 & SAB82532_ISR0_RPF) { + count = SAB82532_RECV_FIFO_SIZE; + free_fifo++; + } + + if (stat->sreg.isr0 & SAB82532_ISR0_TCD) { + count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1); + free_fifo++; + } + + /* Issue a FIFO read command in case we where idle. */ + if (stat->sreg.isr0 & SAB82532_ISR0_TIME) { + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr); + return tty; + } + + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + free_fifo++; + + /* Read the FIFO. */ + for (i = 0; i < count; i++) + buf[i] = readb(&up->regs->r.rfifo[i]); + + /* Issue Receive Message Complete command. */ + if (free_fifo) { + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr); + } + + /* Count may be zero for BRK, so we check for it here */ + if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) && + (up->port.line == up->port.cons->index)) + saw_console_brk = 1; + + for (i = 0; i < count; i++) { + unsigned char ch = buf[i]; + + if (tty == NULL) { + uart_handle_sysrq_char(&up->port, ch, regs); + continue; + } + + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + tty->flip.work.func((void *)tty); + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + return tty; // if TTY_DONT_FLIP is set + } + + *tty->flip.char_buf_ptr = ch; + *tty->flip.flag_buf_ptr = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR | + SAB82532_ISR0_RFO)) || + unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) { + /* + * For statistics only + */ + if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { + stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + continue; + } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) + up->port.icount.parity++; + else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) + up->port.icount.frame++; + if (stat->sreg.isr0 & SAB82532_ISR0_RFO) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + stat->sreg.isr0 &= (up->port.read_status_mask & 0xff); + stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff); + + if (stat->sreg.isr1 & SAB82532_ISR1_BRK) { + *tty->flip.flag_buf_ptr = TTY_BREAK; + } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (stat->sreg.isr0 & SAB82532_ISR0_FERR) + *tty->flip.flag_buf_ptr = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch, regs)) + continue; + + if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 && + (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0){ + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + if ((stat->sreg.isr0 & SAB82532_ISR0_RFO) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + } + + if (saw_console_brk) + sun_do_break(); + + return tty; +} + +static void sunsab_stop_tx(struct uart_port *, unsigned int); + +static void transmit_chars(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + struct circ_buf *xmit = &up->port.info->xmit; + int i; + + if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) { + up->interrupt_mask1 |= SAB82532_IMR1_ALLS; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + set_bit(SAB82532_ALLS, &up->irqflags); + } + +#if 0 /* bde@nwlink.com says this check causes problems */ + if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR)) + return; +#endif + + if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW)) + return; + + set_bit(SAB82532_XPR, &up->irqflags); + + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + up->interrupt_mask1 |= SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + uart_write_wakeup(&up->port); + return; + } + + up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + clear_bit(SAB82532_ALLS, &up->irqflags); + + /* Stuff 32 bytes into Transmit FIFO. */ + clear_bit(SAB82532_XPR, &up->irqflags); + for (i = 0; i < up->port.fifosize; i++) { + writeb(xmit->buf[xmit->tail], + &up->regs->w.xfifo[i]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Issue a Transmit Frame command. */ + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + sunsab_stop_tx(&up->port, 0); +} + +static void check_status(struct uart_sunsab_port *up, + union sab82532_irq_status *stat) +{ + if (stat->sreg.isr0 & SAB82532_ISR0_CDSC) + uart_handle_dcd_change(&up->port, + !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD)); + + if (stat->sreg.isr1 & SAB82532_ISR1_CSC) + uart_handle_cts_change(&up->port, + (readb(&up->regs->r.star) & SAB82532_STAR_CTS)); + + if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) { + up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1; + up->port.icount.dsr++; + } + + wake_up_interruptible(&up->port.info->delta_msr_wait); +} + +static irqreturn_t sunsab_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_sunsab_port *up = dev_id; + struct tty_struct *tty; + union sab82532_irq_status status; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + status.stat = 0; + if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA0) + status.sreg.isr0 = readb(&up->regs->r.isr0); + if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA1) + status.sreg.isr1 = readb(&up->regs->r.isr1); + + tty = NULL; + if (status.stat) { + if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | + SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || + (status.sreg.isr1 & SAB82532_ISR1_BRK)) + tty = receive_chars(up, &status, regs); + if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || + (status.sreg.isr1 & SAB82532_ISR1_CSC)) + check_status(up, &status); + if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) + transmit_chars(up, &status); + } + + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + up++; + + spin_lock(&up->port.lock); + + status.stat = 0; + if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB0) + status.sreg.isr0 = readb(&up->regs->r.isr0); + if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB1) + status.sreg.isr1 = readb(&up->regs->r.isr1); + + tty = NULL; + if (status.stat) { + if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | + SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) || + (status.sreg.isr1 & SAB82532_ISR1_BRK)) + + tty = receive_chars(up, &status, regs); + if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) || + (status.sreg.isr1 & (SAB82532_ISR1_BRK | SAB82532_ISR1_CSC))) + check_status(up, &status); + if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR)) + transmit_chars(up, &status); + } + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + return IRQ_HANDLED; +} + +/* port->lock is not held. */ +static unsigned int sunsab_tx_empty(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + int ret; + + /* Do not need a lock for a state test like this. */ + if (test_bit(SAB82532_ALLS, &up->irqflags)) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* port->lock held by caller. */ +static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + + if (mctrl & TIOCM_RTS) { + writeb(readb(&up->regs->rw.mode) & ~SAB82532_MODE_FRTS, + &up->regs->rw.mode); + writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS, + &up->regs->rw.mode); + } else { + writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS, + &up->regs->rw.mode); + writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS, + &up->regs->rw.mode); + } + if (mctrl & TIOCM_DTR) { + writeb(readb(&up->regs->rw.pvr) & ~(up->pvr_dtr_bit), &up->regs->rw.pvr); + } else { + writeb(readb(&up->regs->rw.pvr) | up->pvr_dtr_bit, &up->regs->rw.pvr); + } +} + +/* port->lock is not held. */ +static unsigned int sunsab_get_mctrl(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + unsigned char val; + unsigned int result; + + result = 0; + + spin_lock_irqsave(&up->port.lock, flags); + + val = readb(&up->regs->r.pvr); + result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR; + + val = readb(&up->regs->r.vstr); + result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR; + + val = readb(&up->regs->r.star); + result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0; + + spin_unlock_irqrestore(&up->port.lock, flags); + + return result; +} + +/* port->lock held by caller. */ +static void sunsab_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + + up->interrupt_mask1 |= SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); +} + +/* port->lock held by caller. */ +static void sunsab_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + struct circ_buf *xmit = &up->port.info->xmit; + int i; + + up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + if (!test_bit(SAB82532_XPR, &up->irqflags)) + return; + + clear_bit(SAB82532_ALLS, &up->irqflags); + clear_bit(SAB82532_XPR, &up->irqflags); + + for (i = 0; i < up->port.fifosize; i++) { + writeb(xmit->buf[xmit->tail], + &up->regs->w.xfifo[i]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } + + /* Issue a Transmit Frame command. */ + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr); +} + +/* port->lock is not held. */ +static void sunsab_send_xchar(struct uart_port *port, char ch) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + sunsab_tec_wait(up); + writeb(ch, &up->regs->w.tic); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* port->lock held by caller. */ +static void sunsab_stop_rx(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + + up->interrupt_mask0 |= SAB82532_ISR0_TCD; + writeb(up->interrupt_mask1, &up->regs->w.imr0); +} + +/* port->lock held by caller. */ +static void sunsab_enable_ms(struct uart_port *port) +{ + /* For now we always receive these interrupts. */ +} + +/* port->lock is not held. */ +static void sunsab_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + unsigned char val; + + spin_lock_irqsave(&up->port.lock, flags); + + val = readb(&up->regs->rw.dafo); + if (break_state) + val |= SAB82532_DAFO_XBRK; + else + val &= ~SAB82532_DAFO_XBRK; + writeb(val, &up->regs->rw.dafo); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* port->lock is not held. */ +static int sunsab_startup(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + unsigned char tmp; + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Wait for any commands or immediate characters + */ + sunsab_cec_wait(up); + sunsab_tec_wait(up); + + /* + * Clear the FIFO buffers. + */ + writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr); + sunsab_cec_wait(up); + writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr); + + /* + * Clear the interrupt registers. + */ + (void) readb(&up->regs->r.isr0); + (void) readb(&up->regs->r.isr1); + + /* + * Now, initialize the UART + */ + writeb(0, &up->regs->w.ccr0); /* power-down */ + writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ | + SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0); + writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1); + writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL | + SAB82532_CCR2_TOE, &up->regs->w.ccr2); + writeb(0, &up->regs->w.ccr3); + writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4); + writeb(SAB82532_MODE_RTS | SAB82532_MODE_FCTS | + SAB82532_MODE_RAC, &up->regs->w.mode); + writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc); + + tmp = readb(&up->regs->rw.ccr0); + tmp |= SAB82532_CCR0_PU; /* power-up */ + writeb(tmp, &up->regs->rw.ccr0); + + /* + * Finally, enable interrupts + */ + up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | + SAB82532_IMR0_PLLA); + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | + SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | + SAB82532_IMR1_CSC | SAB82532_IMR1_XON | + SAB82532_IMR1_XPR); + writeb(up->interrupt_mask1, &up->regs->w.imr1); + set_bit(SAB82532_ALLS, &up->irqflags); + set_bit(SAB82532_XPR, &up->irqflags); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +/* port->lock is not held. */ +static void sunsab_shutdown(struct uart_port *port) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + unsigned char tmp; + + spin_lock_irqsave(&up->port.lock, flags); + + /* Disable Interrupts */ + up->interrupt_mask0 = 0xff; + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = 0xff; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + /* Disable break condition */ + tmp = readb(&up->regs->rw.dafo); + tmp &= ~SAB82532_DAFO_XBRK; + writeb(tmp, &up->regs->rw.dafo); + + /* Disable Receiver */ + tmp = readb(&up->regs->rw.mode); + tmp &= ~SAB82532_MODE_RAC; + writeb(tmp, &up->regs->rw.mode); + + /* + * XXX FIXME + * + * If the chip is powered down here the system hangs/crashes during + * reboot or shutdown. This needs to be investigated further, + * similar behaviour occurs in 2.4 when the driver is configured + * as a module only. One hint may be that data is sometimes + * transmitted at 9600 baud during shutdown (regardless of the + * speed the chip was configured for when the port was open). + */ +#if 0 + /* Power Down */ + tmp = readb(&up->regs->rw.ccr0); + tmp &= ~SAB82532_CCR0_PU; + writeb(tmp, &up->regs->rw.ccr0); +#endif + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +/* + * This is used to figure out the divisor speeds. + * + * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)), + * + * with 0 <= N < 64 and 0 <= M < 16 + */ + +static void calc_ebrg(int baud, int *n_ret, int *m_ret) +{ + int n, m; + + if (baud == 0) { + *n_ret = 0; + *m_ret = 0; + return; + } + + /* + * We scale numbers by 10 so that we get better accuracy + * without having to use floating point. Here we increment m + * until n is within the valid range. + */ + n = (SAB_BASE_BAUD * 10) / baud; + m = 0; + while (n >= 640) { + n = n / 2; + m++; + } + n = (n+5) / 10; + /* + * We try very hard to avoid speeds with M == 0 since they may + * not work correctly for XTAL frequences above 10 MHz. + */ + if ((m == 0) && ((n & 1) == 0)) { + n = n / 2; + m++; + } + *n_ret = n - 1; + *m_ret = m; +} + +/* Internal routine, port->lock is held and local interrupts are disabled. */ +static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag, + unsigned int iflag, int baud) +{ + unsigned int ebrg; + unsigned char dafo; + int bits, n, m; + + /* Byte size and parity */ + switch (cflag & CSIZE) { + case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break; + case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break; + case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break; + case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: dafo = SAB82532_DAFO_CHL5; bits = 7; break; + } + + if (cflag & CSTOPB) { + dafo |= SAB82532_DAFO_STOP; + bits++; + } + + if (cflag & PARENB) { + dafo |= SAB82532_DAFO_PARE; + bits++; + } + + if (cflag & PARODD) { + dafo |= SAB82532_DAFO_PAR_ODD; + } else { + dafo |= SAB82532_DAFO_PAR_EVEN; + } + + calc_ebrg(baud, &n, &m); + + ebrg = n | (m << 6); + + up->tec_timeout = (10 * 1000000) / baud; + up->cec_timeout = up->tec_timeout >> 2; + + /* CTS flow control flags */ + /* We encode read_status_mask and ignore_status_mask like so: + * + * --------------------- + * | ... | ISR1 | ISR0 | + * --------------------- + * .. 15 8 7 0 + */ + + up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME | + SAB82532_ISR0_RFO | SAB82532_ISR0_RPF | + SAB82532_ISR0_CDSC); + up->port.read_status_mask |= (SAB82532_ISR1_CSC | + SAB82532_ISR1_ALLS | + SAB82532_ISR1_XPR) << 8; + if (iflag & INPCK) + up->port.read_status_mask |= (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8); + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= (SAB82532_ISR0_PERR | + SAB82532_ISR0_FERR); + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8); + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + up->port.ignore_status_mask |= SAB82532_ISR0_RFO; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask |= (SAB82532_ISR0_RPF | + SAB82532_ISR0_TCD); + + /* Now bang the new settings into the chip. */ + sunsab_cec_wait(up); + sunsab_tec_wait(up); + writeb(dafo, &up->regs->w.dafo); + writeb(ebrg & 0xff, &up->regs->w.bgr); + writeb((readb(&up->regs->rw.ccr2) & ~0xc0) | ((ebrg >> 2) & 0xc0), + &up->regs->rw.ccr2); + + writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RAC, &up->regs->rw.mode); + +} + +/* port->lock is not held. */ +static void sunsab_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; + unsigned long flags; + int baud = uart_get_baud_rate(port, termios, old, 0, 4000000); + + spin_lock_irqsave(&up->port.lock, flags); + sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *sunsab_type(struct uart_port *port) +{ + struct uart_sunsab_port *up = (void *)port; + static char buf[36]; + + sprintf(buf, "SAB82532 %s", sab82532_version[up->type]); + return buf; +} + +static void sunsab_release_port(struct uart_port *port) +{ +} + +static int sunsab_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunsab_config_port(struct uart_port *port, int flags) +{ +} + +static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops sunsab_pops = { + .tx_empty = sunsab_tx_empty, + .set_mctrl = sunsab_set_mctrl, + .get_mctrl = sunsab_get_mctrl, + .stop_tx = sunsab_stop_tx, + .start_tx = sunsab_start_tx, + .send_xchar = sunsab_send_xchar, + .stop_rx = sunsab_stop_rx, + .enable_ms = sunsab_enable_ms, + .break_ctl = sunsab_break_ctl, + .startup = sunsab_startup, + .shutdown = sunsab_shutdown, + .set_termios = sunsab_set_termios, + .type = sunsab_type, + .release_port = sunsab_release_port, + .request_port = sunsab_request_port, + .config_port = sunsab_config_port, + .verify_port = sunsab_verify_port, +}; + +static struct uart_driver sunsab_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static struct uart_sunsab_port *sunsab_ports; +static int num_channels; + +#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE + +static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char c) +{ + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + + sunsab_tec_wait(up); + writeb(c, &up->regs->w.tic); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void sunsab_console_write(struct console *con, const char *s, unsigned n) +{ + struct uart_sunsab_port *up = &sunsab_ports[con->index]; + int i; + + for (i = 0; i < n; i++) { + if (*s == '\n') + sunsab_console_putchar(up, '\r'); + sunsab_console_putchar(up, *s++); + } + sunsab_tec_wait(up); +} + +static int sunsab_console_setup(struct console *con, char *options) +{ + struct uart_sunsab_port *up = &sunsab_ports[con->index]; + unsigned long flags; + int baud; + + printk("Console: ttyS%d (SAB82532)\n", + (sunsab_reg.minor - 64) + con->index); + + sunserial_console_termios(con); + + /* Firmware console speed is limited to 150-->38400 baud so + * this hackish cflag thing is OK. + */ + switch (con->cflag & CBAUD) { + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + default: case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + }; + + /* + * Temporary fix. + */ + spin_lock_init(&up->port.lock); + + /* + * Initialize the hardware + */ + sunsab_startup(&up->port); + + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Finally, enable interrupts + */ + up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR | + SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC; + writeb(up->interrupt_mask0, &up->regs->w.imr0); + up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS | + SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN | + SAB82532_IMR1_CSC | SAB82532_IMR1_XON | + SAB82532_IMR1_XPR; + writeb(up->interrupt_mask1, &up->regs->w.imr1); + + sunsab_convert_to_sab(up, con->cflag, 0, baud); + sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static struct console sunsab_console = { + .name = "ttyS", + .write = sunsab_console_write, + .device = uart_console_device, + .setup = sunsab_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunsab_reg, +}; +#define SUNSAB_CONSOLE (&sunsab_console) + +static void __init sunsab_console_init(void) +{ + int i; + + if (con_is_present()) + return; + + for (i = 0; i < num_channels; i++) { + int this_minor = sunsab_reg.minor + i; + + if ((this_minor - 64) == (serial_console - 1)) + break; + } + if (i == num_channels) + return; + + sunsab_console.index = i; + register_console(&sunsab_console); +} +#else +#define SUNSAB_CONSOLE (NULL) +#define sunsab_console_init() do { } while (0) +#endif + +static void __init for_each_sab_edev(void (*callback)(struct linux_ebus_device *, void *), void *arg) +{ + struct linux_ebus *ebus; + struct linux_ebus_device *edev = NULL; + + for_each_ebus(ebus) { + for_each_ebusdev(edev, ebus) { + if (!strcmp(edev->prom_name, "se")) { + callback(edev, arg); + continue; + } else if (!strcmp(edev->prom_name, "serial")) { + char compat[32]; + int clen; + + /* On RIO this can be an SE, check it. We could + * just check ebus->is_rio, but this is more portable. + */ + clen = prom_getproperty(edev->prom_node, "compatible", + compat, sizeof(compat)); + if (clen > 0) { + if (strncmp(compat, "sab82532", 8) == 0) { + callback(edev, arg); + continue; + } + } + } + } + } +} + +static void __init sab_count_callback(struct linux_ebus_device *edev, void *arg) +{ + int *count_p = arg; + + (*count_p)++; +} + +static void __init sab_attach_callback(struct linux_ebus_device *edev, void *arg) +{ + int *instance_p = arg; + struct uart_sunsab_port *up; + unsigned long regs, offset; + int i; + + /* Note: ports are located in reverse order */ + regs = edev->resource[0].start; + offset = sizeof(union sab82532_async_regs); + for (i = 0; i < 2; i++) { + up = &sunsab_ports[(*instance_p * 2) + 1 - i]; + + memset(up, 0, sizeof(*up)); + up->regs = ioremap(regs + offset, sizeof(union sab82532_async_regs)); + up->port.irq = edev->irqs[0]; + up->port.fifosize = SAB82532_XMIT_FIFO_SIZE; + up->port.mapbase = (unsigned long)up->regs; + up->port.iotype = SERIAL_IO_MEM; + + writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc); + + offset -= sizeof(union sab82532_async_regs); + } + + (*instance_p)++; +} + +static int __init probe_for_sabs(void) +{ + int this_sab = 0; + + /* Find device instances. */ + for_each_sab_edev(&sab_count_callback, &this_sab); + if (!this_sab) + return -ENODEV; + + /* Allocate tables. */ + sunsab_ports = kmalloc(sizeof(struct uart_sunsab_port) * this_sab * 2, + GFP_KERNEL); + if (!sunsab_ports) + return -ENOMEM; + + num_channels = this_sab * 2; + + this_sab = 0; + for_each_sab_edev(&sab_attach_callback, &this_sab); + return 0; +} + +static void __init sunsab_init_hw(void) +{ + int i; + + for (i = 0; i < num_channels; i++) { + struct uart_sunsab_port *up = &sunsab_ports[i]; + + up->port.line = i; + up->port.ops = &sunsab_pops; + up->port.type = PORT_SUNSAB; + up->port.uartclk = SAB_BASE_BAUD; + + up->type = readb(&up->regs->r.vstr) & 0x0f; + writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr); + writeb(0xff, &up->regs->w.pim); + if (up->port.line == 0) { + up->pvr_dsr_bit = (1 << 0); + up->pvr_dtr_bit = (1 << 1); + } else { + up->pvr_dsr_bit = (1 << 3); + up->pvr_dtr_bit = (1 << 2); + } + writeb((1 << 1) | (1 << 2) | (1 << 4), &up->regs->w.pvr); + writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS, + &up->regs->rw.mode); + writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS, + &up->regs->rw.mode); + + up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; + up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; + + if (!(up->port.line & 0x01)) { + if (request_irq(up->port.irq, sunsab_interrupt, + SA_SHIRQ, "serial(sab82532)", up)) { + printk("sunsab%d: can't get IRQ %x\n", + i, up->port.irq); + continue; + } + } + } +} + +static int __init sunsab_init(void) +{ + int ret = probe_for_sabs(); + int i; + + if (ret < 0) + return ret; + + sunsab_init_hw(); + + sunsab_reg.minor = sunserial_current_minor; + sunsab_reg.nr = num_channels; + sunsab_reg.cons = SUNSAB_CONSOLE; + + ret = uart_register_driver(&sunsab_reg); + if (ret < 0) { + int i; + + for (i = 0; i < num_channels; i++) { + struct uart_sunsab_port *up = &sunsab_ports[i]; + + if (!(up->port.line & 0x01)) + free_irq(up->port.irq, up); + iounmap(up->regs); + } + kfree(sunsab_ports); + sunsab_ports = NULL; + + return ret; + } + + sunserial_current_minor += num_channels; + + sunsab_console_init(); + + for (i = 0; i < num_channels; i++) { + struct uart_sunsab_port *up = &sunsab_ports[i]; + + uart_add_one_port(&sunsab_reg, &up->port); + } + + return 0; +} + +static void __exit sunsab_exit(void) +{ + int i; + + for (i = 0; i < num_channels; i++) { + struct uart_sunsab_port *up = &sunsab_ports[i]; + + uart_remove_one_port(&sunsab_reg, &up->port); + + if (!(up->port.line & 0x01)) + free_irq(up->port.irq, up); + iounmap(up->regs); + } + + sunserial_current_minor -= num_channels; + uart_unregister_driver(&sunsab_reg); + + kfree(sunsab_ports); + sunsab_ports = NULL; +} + +module_init(sunsab_init); +module_exit(sunsab_exit); + +MODULE_AUTHOR("Eddie C. Dost and David S. Miller"); +MODULE_DESCRIPTION("Sun SAB82532 serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunsab.h b/drivers/serial/sunsab.h new file mode 100644 index 000000000000..686086fcbbf5 --- /dev/null +++ b/drivers/serial/sunsab.h @@ -0,0 +1,321 @@ +/* sunsab.h: Register Definitions for the Siemens SAB82532 DUSCC + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + */ + +#ifndef _SUNSAB_H +#define _SUNSAB_H + +struct sab82532_async_rd_regs { + u8 rfifo[0x20]; /* Receive FIFO */ + u8 star; /* Status Register */ + u8 __pad1; + u8 mode; /* Mode Register */ + u8 timr; /* Timer Register */ + u8 xon; /* XON Character */ + u8 xoff; /* XOFF Character */ + u8 tcr; /* Termination Character Register */ + u8 dafo; /* Data Format */ + u8 rfc; /* RFIFO Control Register */ + u8 __pad2; + u8 rbcl; /* Receive Byte Count Low */ + u8 rbch; /* Receive Byte Count High */ + u8 ccr0; /* Channel Configuration Register 0 */ + u8 ccr1; /* Channel Configuration Register 1 */ + u8 ccr2; /* Channel Configuration Register 2 */ + u8 ccr3; /* Channel Configuration Register 3 */ + u8 __pad3[4]; + u8 vstr; /* Version Status Register */ + u8 __pad4[3]; + u8 gis; /* Global Interrupt Status */ + u8 ipc; /* Interrupt Port Configuration */ + u8 isr0; /* Interrupt Status 0 */ + u8 isr1; /* Interrupt Status 1 */ + u8 pvr; /* Port Value Register */ + u8 pis; /* Port Interrupt Status */ + u8 pcr; /* Port Configuration Register */ + u8 ccr4; /* Channel Configuration Register 4 */ +}; + +struct sab82532_async_wr_regs { + u8 xfifo[0x20]; /* Transmit FIFO */ + u8 cmdr; /* Command Register */ + u8 __pad1; + u8 mode; + u8 timr; + u8 xon; + u8 xoff; + u8 tcr; + u8 dafo; + u8 rfc; + u8 __pad2; + u8 xbcl; /* Transmit Byte Count Low */ + u8 xbch; /* Transmit Byte Count High */ + u8 ccr0; + u8 ccr1; + u8 ccr2; + u8 ccr3; + u8 tsax; /* Time-Slot Assignment Reg. Transmit */ + u8 tsar; /* Time-Slot Assignment Reg. Receive */ + u8 xccr; /* Transmit Channel Capacity Register */ + u8 rccr; /* Receive Channel Capacity Register */ + u8 bgr; /* Baud Rate Generator Register */ + u8 tic; /* Transmit Immediate Character */ + u8 mxn; /* Mask XON Character */ + u8 mxf; /* Mask XOFF Character */ + u8 iva; /* Interrupt Vector Address */ + u8 ipc; + u8 imr0; /* Interrupt Mask Register 0 */ + u8 imr1; /* Interrupt Mask Register 1 */ + u8 pvr; + u8 pim; /* Port Interrupt Mask */ + u8 pcr; + u8 ccr4; +}; + +struct sab82532_async_rw_regs { /* Read/Write registers */ + u8 __pad1[0x20]; + u8 __pad2; + u8 __pad3; + u8 mode; + u8 timr; + u8 xon; + u8 xoff; + u8 tcr; + u8 dafo; + u8 rfc; + u8 __pad4; + u8 __pad5; + u8 __pad6; + u8 ccr0; + u8 ccr1; + u8 ccr2; + u8 ccr3; + u8 __pad7; + u8 __pad8; + u8 __pad9; + u8 __pad10; + u8 __pad11; + u8 __pad12; + u8 __pad13; + u8 __pad14; + u8 __pad15; + u8 ipc; + u8 __pad16; + u8 __pad17; + u8 pvr; + u8 __pad18; + u8 pcr; + u8 ccr4; +}; + +union sab82532_async_regs { + __volatile__ struct sab82532_async_rd_regs r; + __volatile__ struct sab82532_async_wr_regs w; + __volatile__ struct sab82532_async_rw_regs rw; +}; + +union sab82532_irq_status { + unsigned short stat; + struct { + unsigned char isr0; + unsigned char isr1; + } sreg; +}; + +/* irqflags bits */ +#define SAB82532_ALLS 0x00000001 +#define SAB82532_XPR 0x00000002 + +/* RFIFO Status Byte */ +#define SAB82532_RSTAT_PE 0x80 +#define SAB82532_RSTAT_FE 0x40 +#define SAB82532_RSTAT_PARITY 0x01 + +/* Status Register (STAR) */ +#define SAB82532_STAR_XDOV 0x80 +#define SAB82532_STAR_XFW 0x40 +#define SAB82532_STAR_RFNE 0x20 +#define SAB82532_STAR_FCS 0x10 +#define SAB82532_STAR_TEC 0x08 +#define SAB82532_STAR_CEC 0x04 +#define SAB82532_STAR_CTS 0x02 + +/* Command Register (CMDR) */ +#define SAB82532_CMDR_RMC 0x80 +#define SAB82532_CMDR_RRES 0x40 +#define SAB82532_CMDR_RFRD 0x20 +#define SAB82532_CMDR_STI 0x10 +#define SAB82532_CMDR_XF 0x08 +#define SAB82532_CMDR_XRES 0x01 + +/* Mode Register (MODE) */ +#define SAB82532_MODE_FRTS 0x40 +#define SAB82532_MODE_FCTS 0x20 +#define SAB82532_MODE_FLON 0x10 +#define SAB82532_MODE_RAC 0x08 +#define SAB82532_MODE_RTS 0x04 +#define SAB82532_MODE_TRS 0x02 +#define SAB82532_MODE_TLP 0x01 + +/* Timer Register (TIMR) */ +#define SAB82532_TIMR_CNT_MASK 0xe0 +#define SAB82532_TIMR_VALUE_MASK 0x1f + +/* Data Format (DAFO) */ +#define SAB82532_DAFO_XBRK 0x40 +#define SAB82532_DAFO_STOP 0x20 +#define SAB82532_DAFO_PAR_SPACE 0x00 +#define SAB82532_DAFO_PAR_ODD 0x08 +#define SAB82532_DAFO_PAR_EVEN 0x10 +#define SAB82532_DAFO_PAR_MARK 0x18 +#define SAB82532_DAFO_PARE 0x04 +#define SAB82532_DAFO_CHL8 0x00 +#define SAB82532_DAFO_CHL7 0x01 +#define SAB82532_DAFO_CHL6 0x02 +#define SAB82532_DAFO_CHL5 0x03 + +/* RFIFO Control Register (RFC) */ +#define SAB82532_RFC_DPS 0x40 +#define SAB82532_RFC_DXS 0x20 +#define SAB82532_RFC_RFDF 0x10 +#define SAB82532_RFC_RFTH_1 0x00 +#define SAB82532_RFC_RFTH_4 0x04 +#define SAB82532_RFC_RFTH_16 0x08 +#define SAB82532_RFC_RFTH_32 0x0c +#define SAB82532_RFC_TCDE 0x01 + +/* Received Byte Count High (RBCH) */ +#define SAB82532_RBCH_DMA 0x80 +#define SAB82532_RBCH_CAS 0x20 + +/* Transmit Byte Count High (XBCH) */ +#define SAB82532_XBCH_DMA 0x80 +#define SAB82532_XBCH_CAS 0x20 +#define SAB82532_XBCH_XC 0x10 + +/* Channel Configuration Register 0 (CCR0) */ +#define SAB82532_CCR0_PU 0x80 +#define SAB82532_CCR0_MCE 0x40 +#define SAB82532_CCR0_SC_NRZ 0x00 +#define SAB82532_CCR0_SC_NRZI 0x08 +#define SAB82532_CCR0_SC_FM0 0x10 +#define SAB82532_CCR0_SC_FM1 0x14 +#define SAB82532_CCR0_SC_MANCH 0x18 +#define SAB82532_CCR0_SM_HDLC 0x00 +#define SAB82532_CCR0_SM_SDLC_LOOP 0x01 +#define SAB82532_CCR0_SM_BISYNC 0x02 +#define SAB82532_CCR0_SM_ASYNC 0x03 + +/* Channel Configuration Register 1 (CCR1) */ +#define SAB82532_CCR1_ODS 0x10 +#define SAB82532_CCR1_BCR 0x08 +#define SAB82532_CCR1_CM_MASK 0x07 + +/* Channel Configuration Register 2 (CCR2) */ +#define SAB82532_CCR2_SOC1 0x80 +#define SAB82532_CCR2_SOC0 0x40 +#define SAB82532_CCR2_BR9 0x80 +#define SAB82532_CCR2_BR8 0x40 +#define SAB82532_CCR2_BDF 0x20 +#define SAB82532_CCR2_SSEL 0x10 +#define SAB82532_CCR2_XCS0 0x20 +#define SAB82532_CCR2_RCS0 0x10 +#define SAB82532_CCR2_TOE 0x08 +#define SAB82532_CCR2_RWX 0x04 +#define SAB82532_CCR2_DIV 0x01 + +/* Channel Configuration Register 3 (CCR3) */ +#define SAB82532_CCR3_PSD 0x01 + +/* Time Slot Assignment Register Transmit (TSAX) */ +#define SAB82532_TSAX_TSNX_MASK 0xfc +#define SAB82532_TSAX_XCS2 0x02 /* see also CCR2 */ +#define SAB82532_TSAX_XCS1 0x01 + +/* Time Slot Assignment Register Receive (TSAR) */ +#define SAB82532_TSAR_TSNR_MASK 0xfc +#define SAB82532_TSAR_RCS2 0x02 /* see also CCR2 */ +#define SAB82532_TSAR_RCS1 0x01 + +/* Version Status Register (VSTR) */ +#define SAB82532_VSTR_CD 0x80 +#define SAB82532_VSTR_DPLA 0x40 +#define SAB82532_VSTR_VN_MASK 0x0f +#define SAB82532_VSTR_VN_1 0x00 +#define SAB82532_VSTR_VN_2 0x01 +#define SAB82532_VSTR_VN_3_2 0x02 + +/* Global Interrupt Status Register (GIS) */ +#define SAB82532_GIS_PI 0x80 +#define SAB82532_GIS_ISA1 0x08 +#define SAB82532_GIS_ISA0 0x04 +#define SAB82532_GIS_ISB1 0x02 +#define SAB82532_GIS_ISB0 0x01 + +/* Interrupt Vector Address (IVA) */ +#define SAB82532_IVA_MASK 0xf1 + +/* Interrupt Port Configuration (IPC) */ +#define SAB82532_IPC_VIS 0x80 +#define SAB82532_IPC_SLA1 0x10 +#define SAB82532_IPC_SLA0 0x08 +#define SAB82532_IPC_CASM 0x04 +#define SAB82532_IPC_IC_OPEN_DRAIN 0x00 +#define SAB82532_IPC_IC_ACT_LOW 0x01 +#define SAB82532_IPC_IC_ACT_HIGH 0x03 + +/* Interrupt Status Register 0 (ISR0) */ +#define SAB82532_ISR0_TCD 0x80 +#define SAB82532_ISR0_TIME 0x40 +#define SAB82532_ISR0_PERR 0x20 +#define SAB82532_ISR0_FERR 0x10 +#define SAB82532_ISR0_PLLA 0x08 +#define SAB82532_ISR0_CDSC 0x04 +#define SAB82532_ISR0_RFO 0x02 +#define SAB82532_ISR0_RPF 0x01 + +/* Interrupt Status Register 1 (ISR1) */ +#define SAB82532_ISR1_BRK 0x80 +#define SAB82532_ISR1_BRKT 0x40 +#define SAB82532_ISR1_ALLS 0x20 +#define SAB82532_ISR1_XOFF 0x10 +#define SAB82532_ISR1_TIN 0x08 +#define SAB82532_ISR1_CSC 0x04 +#define SAB82532_ISR1_XON 0x02 +#define SAB82532_ISR1_XPR 0x01 + +/* Interrupt Mask Register 0 (IMR0) */ +#define SAB82532_IMR0_TCD 0x80 +#define SAB82532_IMR0_TIME 0x40 +#define SAB82532_IMR0_PERR 0x20 +#define SAB82532_IMR0_FERR 0x10 +#define SAB82532_IMR0_PLLA 0x08 +#define SAB82532_IMR0_CDSC 0x04 +#define SAB82532_IMR0_RFO 0x02 +#define SAB82532_IMR0_RPF 0x01 + +/* Interrupt Mask Register 1 (IMR1) */ +#define SAB82532_IMR1_BRK 0x80 +#define SAB82532_IMR1_BRKT 0x40 +#define SAB82532_IMR1_ALLS 0x20 +#define SAB82532_IMR1_XOFF 0x10 +#define SAB82532_IMR1_TIN 0x08 +#define SAB82532_IMR1_CSC 0x04 +#define SAB82532_IMR1_XON 0x02 +#define SAB82532_IMR1_XPR 0x01 + +/* Port Interrupt Status Register (PIS) */ +#define SAB82532_PIS_SYNC_B 0x08 +#define SAB82532_PIS_DTR_B 0x04 +#define SAB82532_PIS_DTR_A 0x02 +#define SAB82532_PIS_SYNC_A 0x01 + +/* Channel Configuration Register 4 (CCR4) */ +#define SAB82532_CCR4_MCK4 0x80 +#define SAB82532_CCR4_EBRG 0x40 +#define SAB82532_CCR4_TST1 0x20 +#define SAB82532_CCR4_ICD 0x10 + + +#endif /* !(_SUNSAB_H) */ diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c new file mode 100644 index 000000000000..23d19d394320 --- /dev/null +++ b/drivers/serial/sunsu.c @@ -0,0 +1,1742 @@ +/* $Id: su.c,v 1.55 2002/01/08 16:00:16 davem Exp $ + * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI + * + * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) + * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com) + * + * This is mainly a variation of 8250.c, credits go to authors mentioned + * therein. In fact this driver should be merged into the generic 8250.c + * infrastructure perhaps using a 8250_sparc.c module. + * + * Fixed to use tty_get_baud_rate(). + * Theodore Ts'o , 2001-Oct-12 + * + * Converted to new 2.5.x UART layer. + * David S. Miller (davem@redhat.com), 2002-Jul-29 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIO +#include +#endif +#include +#include +#include + +#include +#include +#include +#include +#ifdef CONFIG_SPARC64 +#include +#endif + +#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" + +/* We are on a NS PC87303 clocked with 24.0 MHz, which results + * in a UART clock of 1.8462 MHz. + */ +#define SU_BASE_BAUD (1846200 / 16) + +enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT }; +static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" }; + +/* + * Here we define the default xmit fifo size used for each type of UART. + */ +static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = { + { "unknown", 1, 0 }, + { "8250", 1, 0 }, + { "16450", 1, 0 }, + { "16550", 1, 0 }, + { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "Cirrus", 1, 0 }, + { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH }, + { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "Startech", 1, 0 }, + { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, + { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO } +}; + +struct uart_sunsu_port { + struct uart_port port; + unsigned char acr; + unsigned char ier; + unsigned short rev; + unsigned char lcr; + unsigned int lsr_break_flag; + unsigned int cflag; + + /* Probing information. */ + enum su_type su_type; + unsigned int type_probed; /* XXX Stupid */ + int port_node; + +#ifdef CONFIG_SERIO + struct serio *serio; + int serio_open; +#endif +}; + +#define _INLINE_ + +static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset) +{ + offset <<= up->port.regshift; + + switch (up->port.iotype) { + case SERIAL_IO_HUB6: + outb(up->port.hub6 - 1 + offset, up->port.iobase); + return inb(up->port.iobase + 1); + + case SERIAL_IO_MEM: + return readb(up->port.membase + offset); + + default: + return inb(up->port.iobase + offset); + } +} + +static _INLINE_ void +serial_out(struct uart_sunsu_port *up, int offset, int value) +{ +#ifndef CONFIG_SPARC64 + /* + * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are + * connected with a gate then go to SlavIO. When IRQ4 goes tristated + * gate outputs a logical one. Since we use level triggered interrupts + * we have lockup and watchdog reset. We cannot mask IRQ because + * keyboard shares IRQ with us (Word has it as Bob Smelik's design). + * This problem is similar to what Alpha people suffer, see serial.c. + */ + if (offset == UART_MCR) + value |= UART_MCR_OUT2; +#endif + offset <<= up->port.regshift; + + switch (up->port.iotype) { + case SERIAL_IO_HUB6: + outb(up->port.hub6 - 1 + offset, up->port.iobase); + outb(value, up->port.iobase + 1); + break; + + case SERIAL_IO_MEM: + writeb(value, up->port.membase + offset); + break; + + default: + outb(value, up->port.iobase + offset); + } +} + +/* + * We used to support using pause I/O for certain machines. We + * haven't supported this for a while, but just in case it's badly + * needed for certain old 386 machines, I've left these #define's + * in.... + */ +#define serial_inp(up, offset) serial_in(up, offset) +#define serial_outp(up, offset, value) serial_out(up, offset, value) + + +/* + * For the 16C950 + */ +static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value) +{ + serial_out(up, UART_SCR, offset); + serial_out(up, UART_ICR, value); +} + +#if 0 /* Unused currently */ +static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset) +{ + unsigned int value; + + serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); + serial_out(up, UART_SCR, offset); + value = serial_in(up, UART_ICR); + serial_icr_write(up, UART_ACR, up->acr); + + return value; +} +#endif + +#ifdef CONFIG_SERIAL_8250_RSA +/* + * Attempts to turn on the RSA FIFO. Returns zero on failure. + * We set the port uart clock rate if we succeed. + */ +static int __enable_rsa(struct uart_sunsu_port *up) +{ + unsigned char mode; + int result; + + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = mode & UART_RSA_MSR_FIFO; + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; + + return result; +} + +static void enable_rsa(struct uart_sunsu_port *up) +{ + if (up->port.type == PORT_RSA) { + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + __enable_rsa(up); + spin_unlock_irq(&up->port.lock); + } + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) + serial_outp(up, UART_RSA_FRR, 0); + } +} + +/* + * Attempts to turn off the RSA FIFO. Returns zero on failure. + * It is unknown why interrupts were disabled in here. However, + * the caller is expected to preserve this behaviour by grabbing + * the spinlock before calling this function. + */ +static void disable_rsa(struct uart_sunsu_port *up) +{ + unsigned char mode; + int result; + + if (up->port.type == PORT_RSA && + up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { + spin_lock_irq(&up->port.lock); + + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + + if (!result) { + serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); + mode = serial_inp(up, UART_RSA_MSR); + result = !(mode & UART_RSA_MSR_FIFO); + } + + if (result) + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; + spin_unlock_irq(&up->port.lock); + } +} +#endif /* CONFIG_SERIAL_8250_RSA */ + +static void sunsu_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } + if (up->port.type == PORT_16C950 && tty_stop) { + up->acr |= UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void sunsu_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } + /* + * We only do this from uart_start + */ + if (tty_start && up->port.type == PORT_16C950) { + up->acr &= ~UART_ACR_TXDIS; + serial_icr_write(up, UART_ACR, up->acr); + } +} + +static void sunsu_stop_rx(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void sunsu_enable_ms(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static _INLINE_ struct tty_struct * +receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs *regs) +{ + struct tty_struct *tty = up->port.info->tty; + unsigned char ch; + int max_count = 256; + int saw_console_brk = 0; + + do { + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + tty->flip.work.func((void *)tty); + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + return tty; // if TTY_DONT_FLIP is set + } + ch = serial_inp(up, UART_RX); + *tty->flip.char_buf_ptr = ch; + *tty->flip.flag_buf_ptr = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + if (up->port.cons != NULL && + up->port.line == up->port.cons->index) + saw_console_brk = 1; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ingored. + */ + *status &= up->port.read_status_mask; + + if (up->port.cons != NULL && + up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } + + if (*status & UART_LSR_BI) { + *tty->flip.flag_buf_ptr = TTY_BREAK; + } else if (*status & UART_LSR_PE) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (*status & UART_LSR_FE) + *tty->flip.flag_buf_ptr = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch, regs)) + goto ignore_char; + if ((*status & up->port.ignore_status_mask) == 0) { + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + if ((*status & UART_LSR_OE) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character. + */ + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + ignore_char: + *status = serial_inp(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + + if (saw_console_brk) + sun_do_break(); + + return tty; +} + +static _INLINE_ void transmit_chars(struct uart_sunsu_port *up) +{ + struct circ_buf *xmit = &up->port.info->xmit; + int count; + + if (up->port.x_char) { + serial_outp(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + sunsu_stop_tx(&up->port, 0); + return; + } + + count = up->port.fifosize; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + if (uart_circ_empty(xmit)) + sunsu_stop_tx(&up->port, 0); +} + +static _INLINE_ void check_modem_status(struct uart_sunsu_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.info->delta_msr_wait); +} + +static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_sunsu_port *up = dev_id; + unsigned long flags; + unsigned char status; + + spin_lock_irqsave(&up->port.lock, flags); + + do { + struct tty_struct *tty; + + status = serial_inp(up, UART_LSR); + tty = NULL; + if (status & UART_LSR_DR) + tty = receive_chars(up, &status, regs); + check_modem_status(up); + if (status & UART_LSR_THRE) + transmit_chars(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + if (tty) + tty_flip_buffer_push(tty); + + spin_lock_irqsave(&up->port.lock, flags); + + } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return IRQ_HANDLED; +} + +/* Separate interrupt handling path for keyboard/mouse ports. */ + +static void +sunsu_change_speed(struct uart_port *port, unsigned int cflag, + unsigned int iflag, unsigned int quot); + +static void sunsu_change_mouse_baud(struct uart_sunsu_port *up) +{ + unsigned int cur_cflag = up->cflag; + int quot, new_baud; + + up->cflag &= ~CBAUD; + up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); + + quot = up->port.uartclk / (16 * new_baud); + + spin_unlock(&up->port.lock); + + sunsu_change_speed(&up->port, up->cflag, 0, quot); + + spin_lock(&up->port.lock); +} + +static void receive_kbd_ms_chars(struct uart_sunsu_port *up, struct pt_regs *regs, int is_break) +{ + do { + unsigned char ch = serial_inp(up, UART_RX); + + /* Stop-A is handled by drivers/char/keyboard.c now. */ + if (up->su_type == SU_PORT_KBD) { +#ifdef CONFIG_SERIO + serio_interrupt(up->serio, ch, 0, regs); +#endif + } else if (up->su_type == SU_PORT_MS) { + int ret = suncore_mouse_baud_detection(ch, is_break); + + switch (ret) { + case 2: + sunsu_change_mouse_baud(up); + /* fallthru */ + case 1: + break; + + case 0: +#ifdef CONFIG_SERIO + serio_interrupt(up->serio, ch, 0, regs); +#endif + break; + }; + } + } while (serial_in(up, UART_LSR) & UART_LSR_DR); +} + +static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_sunsu_port *up = dev_id; + + if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) { + unsigned char status = serial_inp(up, UART_LSR); + + if ((status & UART_LSR_DR) || (status & UART_LSR_BI)) + receive_kbd_ms_chars(up, regs, + (status & UART_LSR_BI) != 0); + } + + return IRQ_HANDLED; +} + +static unsigned int sunsu_tx_empty(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int sunsu_get_mctrl(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + unsigned char status; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + status = serial_in(up, UART_MSR); + spin_unlock_irqrestore(&up->port.lock, flags); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + serial_out(up, UART_MCR, mcr); +} + +static void sunsu_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int sunsu_startup(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + int retval; + + if (up->port.type == PORT_16C950) { + /* Wake up and initialize UART */ + up->acr = 0; + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_IER, 0); + serial_outp(up, UART_LCR, 0); + serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, UART_EFR_ECB); + serial_outp(up, UART_LCR, 0); + } + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * If this is an RSA port, see if we can kick it up to the + * higher speed clock. + */ + enable_rsa(up); +#endif + + /* + * Clear the FIFO buffers and disable them. + * (they will be reeanbled in set_termios()) + */ + if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_FCR, 0); + } + + /* + * Clear the interrupt registers. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + /* + * At this point, there's no way the LSR could still be 0xff; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (!(up->port.flags & ASYNC_BUGGY_UART) && + (serial_inp(up, UART_LSR) == 0xff)) { + printk("ttyS%d: LSR safety check engaged!\n", up->port.line); + return -ENODEV; + } + + if (up->su_type != SU_PORT_PORT) { + retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt, + SA_SHIRQ, su_typev[up->su_type], up); + } else { + retval = request_irq(up->port.irq, sunsu_serial_interrupt, + SA_SHIRQ, su_typev[up->su_type], up); + } + if (retval) { + printk("su: Cannot register IRQ %d\n", up->port.irq); + return retval; + } + + /* + * Now, initialize the UART + */ + serial_outp(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + + up->port.mctrl |= TIOCM_OUT2; + + sunsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI; + serial_outp(up, UART_IER, up->ier); + + if (up->port.flags & ASYNC_FOURPORT) { + unsigned int icp; + /* + * Enable interrupts on the AST Fourport board + */ + icp = (up->port.iobase & 0xfe0) | 0x01f; + outb_p(0x80, icp); + (void) inb_p(icp); + } + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_inp(up, UART_LSR); + (void) serial_inp(up, UART_RX); + (void) serial_inp(up, UART_IIR); + (void) serial_inp(up, UART_MSR); + + return 0; +} + +static void sunsu_shutdown(struct uart_port *port) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned long flags; + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_outp(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + if (up->port.flags & ASYNC_FOURPORT) { + /* reset interrupts on the AST Fourport board */ + inb((up->port.iobase & 0xfe0) | 0x1f); + up->port.mctrl |= TIOCM_OUT1; + } else + up->port.mctrl &= ~TIOCM_OUT2; + + sunsu_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_outp(up, UART_FCR, 0); + +#ifdef CONFIG_SERIAL_8250_RSA + /* + * Reset the RSA board back to 115kbps compat mode. + */ + disable_rsa(up); +#endif + + /* + * Read data port to reset things. + */ + (void) serial_in(up, UART_RX); + + free_irq(up->port.irq, up); +} + +static void +sunsu_change_speed(struct uart_port *port, unsigned int cflag, + unsigned int iflag, unsigned int quot) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + unsigned char cval, fcr = 0; + unsigned long flags; + + switch (cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + default: + case CS8: + cval = 0x03; + break; + } + + if (cflag & CSTOPB) + cval |= 0x04; + if (cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; +#ifdef CMSPAR + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; +#endif + + /* + * Work around a bug in the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && + up->rev == 0x5201) + quot ++; + + if (uart_config[up->port.type].flags & UART_USE_FIFO) { + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; +#ifdef CONFIG_SERIAL_8250_RSA + else if (up->port.type == PORT_RSA) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14; +#endif + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; + } + if (up->port.type == PORT_16750) + fcr |= UART_FCR7_64BYTE; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, cflag, (port->uartclk / (16 * quot))); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characteres to ignore + */ + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (uart_config[up->port.type].flags & UART_STARTECH) { + serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0); + } + serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ + serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ + serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ + if (up->port.type == PORT_16750) + serial_outp(up, UART_FCR, fcr); /* set fcr */ + serial_outp(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + if (up->port.type != PORT_16750) { + if (fcr & UART_FCR_ENABLE_FIFO) { + /* emulated UARTs (Lucent Venus 167x) need two steps */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_FCR, fcr); /* set fcr */ + } + + up->cflag = cflag; + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +sunsu_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + unsigned int baud, quot; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot); +} + +static void sunsu_release_port(struct uart_port *port) +{ +} + +static int sunsu_request_port(struct uart_port *port) +{ + return 0; +} + +static void sunsu_config_port(struct uart_port *port, int flags) +{ + struct uart_sunsu_port *up = (struct uart_sunsu_port *) port; + + if (flags & UART_CONFIG_TYPE) { + /* + * We are supposed to call autoconfig here, but this requires + * splitting all the OBP probing crap from the UART probing. + * We'll do it when we kill sunsu.c altogether. + */ + port->type = up->type_probed; /* XXX */ + } +} + +static int +sunsu_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static const char * +sunsu_type(struct uart_port *port) +{ + int type = port->type; + + if (type >= ARRAY_SIZE(uart_config)) + type = 0; + return uart_config[type].name; +} + +static struct uart_ops sunsu_pops = { + .tx_empty = sunsu_tx_empty, + .set_mctrl = sunsu_set_mctrl, + .get_mctrl = sunsu_get_mctrl, + .stop_tx = sunsu_stop_tx, + .start_tx = sunsu_start_tx, + .stop_rx = sunsu_stop_rx, + .enable_ms = sunsu_enable_ms, + .break_ctl = sunsu_break_ctl, + .startup = sunsu_startup, + .shutdown = sunsu_shutdown, + .set_termios = sunsu_set_termios, + .type = sunsu_type, + .release_port = sunsu_release_port, + .request_port = sunsu_request_port, + .config_port = sunsu_config_port, + .verify_port = sunsu_verify_port, +}; + +#define UART_NR 4 + +static struct uart_sunsu_port sunsu_ports[UART_NR]; + +#ifdef CONFIG_SERIO + +static DEFINE_SPINLOCK(sunsu_serio_lock); + +static int sunsu_serio_write(struct serio *serio, unsigned char ch) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + int lsr; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + + do { + lsr = serial_in(up, UART_LSR); + } while (!(lsr & UART_LSR_THRE)); + + /* Send the character out. */ + serial_out(up, UART_TX, ch); + + spin_unlock_irqrestore(&sunsu_serio_lock, flags); + + return 0; +} + +static int sunsu_serio_open(struct serio *serio) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + if (!up->serio_open) { + up->serio_open = 1; + ret = 0; + } else + ret = -EBUSY; + spin_unlock_irqrestore(&sunsu_serio_lock, flags); + + return ret; +} + +static void sunsu_serio_close(struct serio *serio) +{ + struct uart_sunsu_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunsu_serio_lock, flags); + up->serio_open = 0; + spin_unlock_irqrestore(&sunsu_serio_lock, flags); +} + +#endif /* CONFIG_SERIO */ + +static void sunsu_autoconfig(struct uart_sunsu_port *up) +{ + unsigned char status1, status2, scratch, scratch2, scratch3; + unsigned char save_lcr, save_mcr; + struct linux_ebus_device *dev = NULL; + struct linux_ebus *ebus; +#ifdef CONFIG_SPARC64 + struct sparc_isa_bridge *isa_br; + struct sparc_isa_device *isa_dev; +#endif +#ifndef CONFIG_SPARC64 + struct linux_prom_registers reg0; +#endif + unsigned long flags; + + if (!up->port_node || !up->su_type) + return; + + up->type_probed = PORT_UNKNOWN; + up->port.iotype = SERIAL_IO_MEM; + + /* + * First we look for Ebus-bases su's + */ + for_each_ebus(ebus) { + for_each_ebusdev(dev, ebus) { + if (dev->prom_node == up->port_node) { + /* + * The EBus is broken on sparc; it delivers + * virtual addresses in resources. Oh well... + * This is correct on sparc64, though. + */ + up->port.membase = (char *) dev->resource[0].start; + /* + * This is correct on both architectures. + */ + up->port.mapbase = dev->resource[0].start; + up->port.irq = dev->irqs[0]; + goto ebus_done; + } + } + } + +#ifdef CONFIG_SPARC64 + for_each_isa(isa_br) { + for_each_isadev(isa_dev, isa_br) { + if (isa_dev->prom_node == up->port_node) { + /* Same on sparc64. Cool architecure... */ + up->port.membase = (char *) isa_dev->resource.start; + up->port.mapbase = isa_dev->resource.start; + up->port.irq = isa_dev->irq; + goto ebus_done; + } + } + } +#endif + +#ifdef CONFIG_SPARC64 + /* + * Not on Ebus, bailing. + */ + return; +#else + /* + * Not on Ebus, must be OBIO. + */ + if (prom_getproperty(up->port_node, "reg", + (char *)®0, sizeof(reg0)) == -1) { + prom_printf("sunsu: no \"reg\" property\n"); + return; + } + prom_apply_obio_ranges(®0, 1); + if (reg0.which_io != 0) { /* Just in case... */ + prom_printf("sunsu: bus number nonzero: 0x%x:%x\n", + reg0.which_io, reg0.phys_addr); + return; + } + up->port.mapbase = reg0.phys_addr; + if ((up->port.membase = ioremap(reg0.phys_addr, reg0.reg_size)) == 0) { + prom_printf("sunsu: Cannot map registers.\n"); + return; + } + + /* + * 0x20 is sun4m thing, Dave Redman heritage. + * See arch/sparc/kernel/irq.c. + */ +#define IRQ_4M(n) ((n)|0x20) + + /* + * There is no intr property on MrCoffee, so hardwire it. + */ + up->port.irq = IRQ_4M(13); +#endif + +ebus_done: + + spin_lock_irqsave(&up->port.lock, flags); + + if (!(up->port.flags & ASYNC_BUGGY_UART)) { + /* + * Do a simple existence test first; if we fail this, there's + * no point trying anything else. + * + * 0x80 is used as a nonsense port to prevent against false + * positives due to ISA bus float. The assumption is that + * 0x80 is a non-existent port; which should be safe since + * include/asm/io.h also makes this assumption. + */ + scratch = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + scratch2 = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, 0x0f); +#ifdef __i386__ + outb(0, 0x080); +#endif + scratch3 = serial_inp(up, UART_IER); + serial_outp(up, UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0F) + goto out; /* We failed; there's nothing here */ + } + + save_mcr = serial_in(up, UART_MCR); + save_lcr = serial_in(up, UART_LCR); + + /* + * Check to see if a UART is really there. Certain broken + * internal modems based on the Rockwell chipset fail this + * test, because they apparently don't implement the loopback + * test mode. So this test is skipped on the COM 1 through + * COM 4 ports. This *should* be safe, since no board + * manufacturer would be stupid enough to design a board + * that conflicts with COM 1-4 --- we hope! + */ + if (!(up->port.flags & ASYNC_SKIP_TEST)) { + serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); + status1 = serial_inp(up, UART_MSR) & 0xF0; + serial_outp(up, UART_MCR, save_mcr); + if (status1 != 0x90) + goto out; /* We failed loopback test */ + } + serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */ + serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */ + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + scratch = serial_in(up, UART_IIR) >> 6; + switch (scratch) { + case 0: + up->port.type = PORT_16450; + break; + case 1: + up->port.type = PORT_UNKNOWN; + break; + case 2: + up->port.type = PORT_16550; + break; + case 3: + up->port.type = PORT_16550A; + break; + } + if (up->port.type == PORT_16550A) { + /* Check for Startech UART's */ + serial_outp(up, UART_LCR, UART_LCR_DLAB); + if (serial_in(up, UART_EFR) == 0) { + up->port.type = PORT_16650; + } else { + serial_outp(up, UART_LCR, 0xBF); + if (serial_in(up, UART_EFR) == 0) + up->port.type = PORT_16650V2; + } + } + if (up->port.type == PORT_16550A) { + /* Check for TI 16750 */ + serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB); + serial_outp(up, UART_FCR, + UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + scratch = serial_in(up, UART_IIR) >> 5; + if (scratch == 7) { + /* + * If this is a 16750, and not a cheap UART + * clone, then it should only go into 64 byte + * mode if the UART_FCR7_64BYTE bit was set + * while UART_LCR_DLAB was latched. + */ + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_outp(up, UART_LCR, 0); + serial_outp(up, UART_FCR, + UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); + scratch = serial_in(up, UART_IIR) >> 5; + if (scratch == 6) + up->port.type = PORT_16750; + } + serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); + } + serial_outp(up, UART_LCR, save_lcr); + if (up->port.type == PORT_16450) { + scratch = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0xa5); + status1 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, 0x5a); + status2 = serial_in(up, UART_SCR); + serial_outp(up, UART_SCR, scratch); + + if ((status1 != 0xa5) || (status2 != 0x5a)) + up->port.type = PORT_8250; + } + + up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; + + if (up->port.type == PORT_UNKNOWN) + goto out; + up->type_probed = up->port.type; /* XXX */ + + /* + * Reset the UART. + */ +#ifdef CONFIG_SERIAL_8250_RSA + if (up->port.type == PORT_RSA) + serial_outp(up, UART_RSA_FRR, 0); +#endif + serial_outp(up, UART_MCR, save_mcr); + serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT)); + serial_outp(up, UART_FCR, 0); + (void)serial_in(up, UART_RX); + serial_outp(up, UART_IER, 0); + +out: + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static struct uart_driver sunsu_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel) +{ +#ifdef CONFIG_SERIO + struct serio *serio; +#endif + + up->port.line = channel; + up->port.type = PORT_UNKNOWN; + up->port.uartclk = (SU_BASE_BAUD * 16); + + if (up->su_type == SU_PORT_KBD) + up->cflag = B1200 | CS8 | CLOCAL | CREAD; + else + up->cflag = B4800 | CS8 | CLOCAL | CREAD; + + sunsu_autoconfig(up); + if (up->port.type == PORT_UNKNOWN) + return -1; + + printk(KERN_INFO "su%d at 0x%p (irq = %s) is a %s\n", + channel, + up->port.membase, __irq_itoa(up->port.irq), + sunsu_type(&up->port)); + +#ifdef CONFIG_SERIO + up->serio = serio = kmalloc(sizeof(struct serio), GFP_KERNEL); + if (serio) { + memset(serio, 0, sizeof(*serio)); + + serio->port_data = up; + + serio->id.type = SERIO_RS232; + if (up->su_type == SU_PORT_KBD) { + serio->id.proto = SERIO_SUNKBD; + strlcpy(serio->name, "sukbd", sizeof(serio->name)); + } else { + serio->id.proto = SERIO_SUN; + serio->id.extra = 1; + strlcpy(serio->name, "sums", sizeof(serio->name)); + } + strlcpy(serio->phys, (channel == 0 ? "su/serio0" : "su/serio1"), + sizeof(serio->phys)); + + serio->write = sunsu_serio_write; + serio->open = sunsu_serio_open; + serio->close = sunsu_serio_close; + + serio_register_port(serio); + } else { + printk(KERN_WARNING "su%d: not enough memory for serio port\n", + channel); + } +#endif + + sunsu_startup(&up->port); + return 0; +} + +/* + * ------------------------------------------------------------ + * Serial console driver + * ------------------------------------------------------------ + */ + +#ifdef CONFIG_SERIAL_SUNSU_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & ASYNC_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + */ +static void sunsu_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_sunsu_port *up = &sunsu_ports[co->index]; + unsigned int ier; + int i; + + /* + * First save the UER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, 0); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++, s++) { + wait_for_xmitr(up); + + /* + * Send the character out. + * If a LF, also do CR... + */ + serial_out(up, UART_TX, *s); + if (*s == 10) { + wait_for_xmitr(up); + serial_out(up, UART_TX, 13); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); +} + +/* + * Setup initial baud/bits/parity. We do two things here: + * - construct a cflag setting for the first su_open() + * - initialize the serial port + * Return non-zero if we didn't find a serial port. + */ +static int __init sunsu_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + printk("Console: ttyS%d (SU)\n", + (sunsu_reg.minor - 64) + co->index); + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= UART_NR) + co->index = 0; + port = &sunsu_ports[co->index].port; + + /* + * Temporary fix. + */ + spin_lock_init(&port->lock); + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console sunsu_cons = { + .name = "ttyS", + .write = sunsu_console_write, + .device = uart_console_device, + .setup = sunsu_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunsu_reg, +}; +#define SUNSU_CONSOLE (&sunsu_cons) + +/* + * Register console. + */ + +static int __init sunsu_serial_console_init(void) +{ + int i; + + if (con_is_present()) + return 0; + + for (i = 0; i < UART_NR; i++) { + int this_minor = sunsu_reg.minor + i; + + if ((this_minor - 64) == (serial_console - 1)) + break; + } + if (i == UART_NR) + return 0; + if (sunsu_ports[i].port_node == 0) + return 0; + + sunsu_cons.index = i; + register_console(&sunsu_cons); + return 0; +} +#else +#define SUNSU_CONSOLE (NULL) +#define sunsu_serial_console_init() do { } while (0) +#endif + +static int __init sunsu_serial_init(void) +{ + int instance, ret, i; + + /* How many instances do we need? */ + instance = 0; + for (i = 0; i < UART_NR; i++) { + struct uart_sunsu_port *up = &sunsu_ports[i]; + + if (up->su_type == SU_PORT_MS || + up->su_type == SU_PORT_KBD) + continue; + + up->port.flags |= ASYNC_BOOT_AUTOCONF; + up->port.type = PORT_UNKNOWN; + up->port.uartclk = (SU_BASE_BAUD * 16); + + sunsu_autoconfig(up); + if (up->port.type == PORT_UNKNOWN) + continue; + + up->port.line = instance++; + up->port.ops = &sunsu_pops; + } + + sunsu_reg.minor = sunserial_current_minor; + sunserial_current_minor += instance; + + sunsu_reg.nr = instance; + sunsu_reg.cons = SUNSU_CONSOLE; + + ret = uart_register_driver(&sunsu_reg); + if (ret < 0) + return ret; + + sunsu_serial_console_init(); + for (i = 0; i < UART_NR; i++) { + struct uart_sunsu_port *up = &sunsu_ports[i]; + + /* Do not register Keyboard/Mouse lines with UART + * layer. + */ + if (up->su_type == SU_PORT_MS || + up->su_type == SU_PORT_KBD) + continue; + + if (up->port.type == PORT_UNKNOWN) + continue; + + uart_add_one_port(&sunsu_reg, &up->port); + } + + return 0; +} + +static int su_node_ok(int node, char *name, int namelen) +{ + if (strncmp(name, "su", namelen) == 0 || + strncmp(name, "su_pnp", namelen) == 0) + return 1; + + if (strncmp(name, "serial", namelen) == 0) { + char compat[32]; + int clen; + + /* Is it _really_ a 'su' device? */ + clen = prom_getproperty(node, "compatible", compat, sizeof(compat)); + if (clen > 0) { + if (strncmp(compat, "sab82532", 8) == 0) { + /* Nope, Siemens serial, not for us. */ + return 0; + } + } + return 1; + } + + return 0; +} + +#define SU_PROPSIZE 128 + +/* + * Scan status structure. + * "prop" is a local variable but it eats stack to keep it in each + * stack frame of a recursive procedure. + */ +struct su_probe_scan { + int msnode, kbnode; /* PROM nodes for mouse and keyboard */ + int msx, kbx; /* minors for mouse and keyboard */ + int devices; /* scan index */ + char prop[SU_PROPSIZE]; +}; + +/* + * We have several platforms which present 'su' in different parts + * of the device tree. 'su' may be found under obio, ebus, isa and pci. + * We walk over the tree and find them wherever PROM hides them. + */ +static void __init su_probe_any(struct su_probe_scan *t, int sunode) +{ + struct uart_sunsu_port *up; + int len; + + if (t->devices >= UART_NR) + return; + + for (; sunode != 0; sunode = prom_getsibling(sunode)) { + len = prom_getproperty(sunode, "name", t->prop, SU_PROPSIZE); + if (len <= 1) + continue; /* Broken PROM node */ + + if (su_node_ok(sunode, t->prop, len)) { + up = &sunsu_ports[t->devices]; + if (t->kbnode != 0 && sunode == t->kbnode) { + t->kbx = t->devices; + up->su_type = SU_PORT_KBD; + } else if (t->msnode != 0 && sunode == t->msnode) { + t->msx = t->devices; + up->su_type = SU_PORT_MS; + } else { +#ifdef CONFIG_SPARC64 + /* + * Do not attempt to use the truncated + * keyboard/mouse ports as serial ports + * on Ultras with PC keyboard attached. + */ + if (prom_getbool(sunode, "mouse")) + continue; + if (prom_getbool(sunode, "keyboard")) + continue; +#endif + up->su_type = SU_PORT_PORT; + } + up->port_node = sunode; + ++t->devices; + } else { + su_probe_any(t, prom_getchild(sunode)); + } + } +} + +static int __init sunsu_probe(void) +{ + int node; + int len; + struct su_probe_scan scan; + + /* + * First, we scan the tree. + */ + scan.devices = 0; + scan.msx = -1; + scan.kbx = -1; + scan.kbnode = 0; + scan.msnode = 0; + + /* + * Get the nodes for keyboard and mouse from 'aliases'... + */ + node = prom_getchild(prom_root_node); + node = prom_searchsiblings(node, "aliases"); + if (node != 0) { + len = prom_getproperty(node, "keyboard", scan.prop, SU_PROPSIZE); + if (len > 0) { + scan.prop[len] = 0; + scan.kbnode = prom_finddevice(scan.prop); + } + + len = prom_getproperty(node, "mouse", scan.prop, SU_PROPSIZE); + if (len > 0) { + scan.prop[len] = 0; + scan.msnode = prom_finddevice(scan.prop); + } + } + + su_probe_any(&scan, prom_getchild(prom_root_node)); + + /* + * Second, we process the special case of keyboard and mouse. + * + * Currently if we got keyboard and mouse hooked to "su" ports + * we do not use any possible remaining "su" as a serial port. + * Thus, we ignore values of .msx and .kbx, then compact ports. + */ + if (scan.msx != -1 && scan.kbx != -1) { + sunsu_ports[0].su_type = SU_PORT_MS; + sunsu_ports[0].port_node = scan.msnode; + sunsu_kbd_ms_init(&sunsu_ports[0], 0); + + sunsu_ports[1].su_type = SU_PORT_KBD; + sunsu_ports[1].port_node = scan.kbnode; + sunsu_kbd_ms_init(&sunsu_ports[1], 1); + + return 0; + } + + if (scan.msx != -1 || scan.kbx != -1) { + printk("sunsu_probe: cannot match keyboard and mouse, confused\n"); + return -ENODEV; + } + + if (scan.devices == 0) + return -ENODEV; + + /* + * Console must be initiated after the generic initialization. + */ + sunsu_serial_init(); + + return 0; +} + +static void __exit sunsu_exit(void) +{ + int i, saw_uart; + + saw_uart = 0; + for (i = 0; i < UART_NR; i++) { + struct uart_sunsu_port *up = &sunsu_ports[i]; + + if (up->su_type == SU_PORT_MS || + up->su_type == SU_PORT_KBD) { +#ifdef CONFIG_SERIO + if (up->serio) { + serio_unregister_port(up->serio); + up->serio = NULL; + } +#endif + } else if (up->port.type != PORT_UNKNOWN) { + uart_remove_one_port(&sunsu_reg, &up->port); + saw_uart++; + } + } + + if (saw_uart) + uart_unregister_driver(&sunsu_reg); +} + +module_init(sunsu_probe); +module_exit(sunsu_exit); diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c new file mode 100644 index 000000000000..5c4231ae295b --- /dev/null +++ b/drivers/serial/sunzilog.c @@ -0,0 +1,1773 @@ +/* + * sunzilog.c + * + * Driver for Zilog serial chips found on Sun workstations and + * servers. This driver could actually be made more generic. + * + * This is based on the old drivers/sbus/char/zs.c code. A lot + * of code has been simply moved over directly from there but + * much has been rewritten. Credits therefore go out to Eddie + * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their + * work there. + * + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_SERIO +#include +#endif +#include + +#include +#include +#ifdef CONFIG_SPARC64 +#include +#endif +#include + +#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include + +#include "suncore.h" +#include "sunzilog.h" + +/* On 32-bit sparcs we need to delay after register accesses + * to accommodate sun4 systems, but we do not need to flush writes. + * On 64-bit sparc we only need to flush single writes to ensure + * completion. + */ +#ifndef CONFIG_SPARC64 +#define ZSDELAY() udelay(5) +#define ZSDELAY_LONG() udelay(20) +#define ZS_WSYNC(channel) do { } while (0) +#else +#define ZSDELAY() +#define ZSDELAY_LONG() +#define ZS_WSYNC(__channel) \ + sbus_readb(&((__channel)->control)) +#endif + +static int num_sunzilog; +#define NUM_SUNZILOG num_sunzilog +#define NUM_CHANNELS (NUM_SUNZILOG * 2) + +#define KEYBOARD_LINE 0x2 +#define MOUSE_LINE 0x3 + +#define ZS_CLOCK 4915200 /* Zilog input clock rate. */ +#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */ + +/* + * We wrap our port structure around the generic uart_port. + */ +struct uart_sunzilog_port { + struct uart_port port; + + /* IRQ servicing chain. */ + struct uart_sunzilog_port *next; + + /* Current values of Zilog write registers. */ + unsigned char curregs[NUM_ZSREGS]; + + unsigned int flags; +#define SUNZILOG_FLAG_CONS_KEYB 0x00000001 +#define SUNZILOG_FLAG_CONS_MOUSE 0x00000002 +#define SUNZILOG_FLAG_IS_CONS 0x00000004 +#define SUNZILOG_FLAG_IS_KGDB 0x00000008 +#define SUNZILOG_FLAG_MODEM_STATUS 0x00000010 +#define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020 +#define SUNZILOG_FLAG_REGS_HELD 0x00000040 +#define SUNZILOG_FLAG_TX_STOPPED 0x00000080 +#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100 + + unsigned int cflag; + + unsigned char parity_mask; + unsigned char prev_status; + +#ifdef CONFIG_SERIO + struct serio *serio; + int serio_open; +#endif +}; + +#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) +#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT)) + +#define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB) +#define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE) +#define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS) +#define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB) +#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS) +#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A) +#define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD) +#define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED) +#define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE) + +/* Reading and writing Zilog8530 registers. The delays are to make this + * driver work on the Sun4 which needs a settling delay after each chip + * register access, other machines handle this in hardware via auxiliary + * flip-flops which implement the settle time we do in software. + * + * The port lock must be held and local IRQs must be disabled + * when {read,write}_zsreg is invoked. + */ +static unsigned char read_zsreg(struct zilog_channel __iomem *channel, + unsigned char reg) +{ + unsigned char retval; + + sbus_writeb(reg, &channel->control); + ZSDELAY(); + retval = sbus_readb(&channel->control); + ZSDELAY(); + + return retval; +} + +static void write_zsreg(struct zilog_channel __iomem *channel, + unsigned char reg, unsigned char value) +{ + sbus_writeb(reg, &channel->control); + ZSDELAY(); + sbus_writeb(value, &channel->control); + ZSDELAY(); +} + +static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel) +{ + int i; + + for (i = 0; i < 32; i++) { + unsigned char regval; + + regval = sbus_readb(&channel->control); + ZSDELAY(); + if (regval & Rx_CH_AV) + break; + + regval = read_zsreg(channel, R1); + sbus_readb(&channel->data); + ZSDELAY(); + + if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) { + sbus_writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + } +} + +/* This function must only be called when the TX is not busy. The UART + * port lock must be held and local interrupts disabled. + */ +static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs) +{ + int i; + + /* Let pending transmits finish. */ + for (i = 0; i < 1000; i++) { + unsigned char stat = read_zsreg(channel, R1); + if (stat & ALL_SNT) + break; + udelay(100); + } + + sbus_writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + sunzilog_clear_fifo(channel); + + /* Disable all interrupts. */ + write_zsreg(channel, R1, + regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB)); + + /* Set parity, sync config, stop bits, and clock divisor. */ + write_zsreg(channel, R4, regs[R4]); + + /* Set misc. TX/RX control bits. */ + write_zsreg(channel, R10, regs[R10]); + + /* Set TX/RX controls sans the enable bits. */ + write_zsreg(channel, R3, regs[R3] & ~RxENAB); + write_zsreg(channel, R5, regs[R5] & ~TxENAB); + + /* Synchronous mode config. */ + write_zsreg(channel, R6, regs[R6]); + write_zsreg(channel, R7, regs[R7]); + + /* Don't mess with the interrupt vector (R2, unused by us) and + * master interrupt control (R9). We make sure this is setup + * properly at probe time then never touch it again. + */ + + /* Disable baud generator. */ + write_zsreg(channel, R14, regs[R14] & ~BRENAB); + + /* Clock mode control. */ + write_zsreg(channel, R11, regs[R11]); + + /* Lower and upper byte of baud rate generator divisor. */ + write_zsreg(channel, R12, regs[R12]); + write_zsreg(channel, R13, regs[R13]); + + /* Now rewrite R14, with BRENAB (if set). */ + write_zsreg(channel, R14, regs[R14]); + + /* External status interrupt control. */ + write_zsreg(channel, R15, regs[R15]); + + /* Reset external status interrupts. */ + write_zsreg(channel, R0, RES_EXT_INT); + write_zsreg(channel, R0, RES_EXT_INT); + + /* Rewrite R3/R5, this time without enables masked. */ + write_zsreg(channel, R3, regs[R3]); + write_zsreg(channel, R5, regs[R5]); + + /* Rewrite R1, this time without IRQ enabled masked. */ + write_zsreg(channel, R1, regs[R1]); +} + +/* Reprogram the Zilog channel HW registers with the copies found in the + * software state struct. If the transmitter is busy, we defer this update + * until the next TX complete interrupt. Else, we do it right now. + * + * The UART port lock must be held and local interrupts disabled. + */ +static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + if (!ZS_REGS_HELD(up)) { + if (ZS_TX_ACTIVE(up)) { + up->flags |= SUNZILOG_FLAG_REGS_HELD; + } else { + __load_zsregs(channel, up->curregs); + } + } +} + +static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up) +{ + unsigned int cur_cflag = up->cflag; + int brg, new_baud; + + up->cflag &= ~CBAUD; + up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); + + brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port)); +} + +static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up, + unsigned char ch, int is_break, + struct pt_regs *regs) +{ + if (ZS_IS_KEYB(up)) { + /* Stop-A is handled by drivers/char/keyboard.c now. */ +#ifdef CONFIG_SERIO + if (up->serio_open) + serio_interrupt(up->serio, ch, 0, regs); +#endif + } else if (ZS_IS_MOUSE(up)) { + int ret = suncore_mouse_baud_detection(ch, is_break); + + switch (ret) { + case 2: + sunzilog_change_mouse_baud(up); + /* fallthru */ + case 1: + break; + + case 0: +#ifdef CONFIG_SERIO + if (up->serio_open) + serio_interrupt(up->serio, ch, 0, regs); +#endif + break; + }; + } +} + +static struct tty_struct * +sunzilog_receive_chars(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel, + struct pt_regs *regs) +{ + struct tty_struct *tty; + unsigned char ch, r1; + + tty = NULL; + if (up->port.info != NULL && /* Unopened serial console */ + up->port.info->tty != NULL) /* Keyboard || mouse */ + tty = up->port.info->tty; + + for (;;) { + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + sbus_writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = sbus_readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + break; + + ch = sbus_readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + + if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) { + sunzilog_kbdms_receive_chars(up, ch, 0, regs); + continue; + } + + if (tty == NULL) { + uart_handle_sysrq_char(&up->port, ch, regs); + continue; + } + + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + tty->flip.work.func((void *)tty); + /* + * The 8250 bails out of the loop here, + * but we need to read everything, or die. + */ + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + continue; + } + + /* A real serial line, record the character and status. */ + *tty->flip.char_buf_ptr = ch; + *tty->flip.flag_buf_ptr = TTY_NORMAL; + up->port.icount.rx++; + if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) { + if (r1 & BRK_ABRT) { + r1 &= ~(PAR_ERR | CRC_ERR); + up->port.icount.brk++; + if (uart_handle_break(&up->port)) + continue; + } + else if (r1 & PAR_ERR) + up->port.icount.parity++; + else if (r1 & CRC_ERR) + up->port.icount.frame++; + if (r1 & Rx_OVR) + up->port.icount.overrun++; + r1 &= up->port.read_status_mask; + if (r1 & BRK_ABRT) + *tty->flip.flag_buf_ptr = TTY_BREAK; + else if (r1 & PAR_ERR) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (r1 & CRC_ERR) + *tty->flip.flag_buf_ptr = TTY_FRAME; + } + if (uart_handle_sysrq_char(&up->port, ch, regs)) + continue; + + if (up->port.ignore_status_mask == 0xff || + (r1 & up->port.ignore_status_mask) == 0) { + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + if ((r1 & Rx_OVR) && + tty->flip.count < TTY_FLIPBUF_SIZE) { + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + } + + return tty; +} + +static void sunzilog_status_handle(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel, + struct pt_regs *regs) +{ + unsigned char status; + + status = sbus_readb(&channel->control); + ZSDELAY(); + + sbus_writeb(RES_EXT_INT, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (status & BRK_ABRT) { + if (ZS_IS_MOUSE(up)) + sunzilog_kbdms_receive_chars(up, 0, 1, regs); + if (ZS_IS_CONS(up)) { + /* Wait for BREAK to deassert to avoid potentially + * confusing the PROM. + */ + while (1) { + status = sbus_readb(&channel->control); + ZSDELAY(); + if (!(status & BRK_ABRT)) + break; + } + sun_do_break(); + return; + } + } + + if (ZS_WANTS_MODEM_STATUS(up)) { + if (status & SYNC) + up->port.icount.dsr++; + + /* The Zilog just gives us an interrupt when DCD/CTS/etc. change. + * But it does not tell us which bit has changed, we have to keep + * track of this ourselves. + */ + if ((status ^ up->prev_status) ^ DCD) + uart_handle_dcd_change(&up->port, + (status & DCD)); + if ((status ^ up->prev_status) ^ CTS) + uart_handle_cts_change(&up->port, + (status & CTS)); + + wake_up_interruptible(&up->port.info->delta_msr_wait); + } + + up->prev_status = status; +} + +static void sunzilog_transmit_chars(struct uart_sunzilog_port *up, + struct zilog_channel __iomem *channel) +{ + struct circ_buf *xmit; + + if (ZS_IS_CONS(up)) { + unsigned char status = sbus_readb(&channel->control); + ZSDELAY(); + + /* TX still busy? Just wait for the next TX done interrupt. + * + * It can occur because of how we do serial console writes. It would + * be nice to transmit console writes just like we normally would for + * a TTY line. (ie. buffered and TX interrupt driven). That is not + * easy because console writes cannot sleep. One solution might be + * to poll on enough port->xmit space becomming free. -DaveM + */ + if (!(status & Tx_BUF_EMP)) + return; + } + + up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE; + + if (ZS_REGS_HELD(up)) { + __load_zsregs(channel, up->curregs); + up->flags &= ~SUNZILOG_FLAG_REGS_HELD; + } + + if (ZS_TX_STOPPED(up)) { + up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; + goto ack_tx_int; + } + + if (up->port.x_char) { + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + sbus_writeb(up->port.x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + + if (up->port.info == NULL) + goto ack_tx_int; + xmit = &up->port.info->xmit; + if (uart_circ_empty(xmit)) { + uart_write_wakeup(&up->port); + goto ack_tx_int; + } + if (uart_tx_stopped(&up->port)) + goto ack_tx_int; + + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + sbus_writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + return; + +ack_tx_int: + sbus_writeb(RES_Tx_P, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); +} + +static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_sunzilog_port *up = dev_id; + + while (up) { + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + struct tty_struct *tty; + unsigned char r3; + + spin_lock(&up->port.lock); + r3 = read_zsreg(channel, R3); + + /* Channel A */ + tty = NULL; + if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { + sbus_writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHARxIP) + tty = sunzilog_receive_chars(up, channel, regs); + if (r3 & CHAEXT) + sunzilog_status_handle(up, channel, regs); + if (r3 & CHATxIP) + sunzilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + /* Channel B */ + up = up->next; + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + + spin_lock(&up->port.lock); + tty = NULL; + if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { + sbus_writeb(RES_H_IUS, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + + if (r3 & CHBRxIP) + tty = sunzilog_receive_chars(up, channel, regs); + if (r3 & CHBEXT) + sunzilog_status_handle(up, channel, regs); + if (r3 & CHBTxIP) + sunzilog_transmit_chars(up, channel); + } + spin_unlock(&up->port.lock); + + if (tty) + tty_flip_buffer_push(tty); + + up = up->next; + } + + return IRQ_HANDLED; +} + +/* A convenient way to quickly get R0 status. The caller must _not_ hold the + * port lock, it is acquired here. + */ +static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port) +{ + struct zilog_channel __iomem *channel; + unsigned long flags; + unsigned char status; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + status = sbus_readb(&channel->control); + ZSDELAY(); + + spin_unlock_irqrestore(&port->lock, flags); + + return status; +} + +/* The port lock is not held. */ +static unsigned int sunzilog_tx_empty(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = sunzilog_read_channel_status(port); + if (status & Tx_BUF_EMP) + ret = TIOCSER_TEMT; + else + ret = 0; + + return ret; +} + +/* The port lock is not held. */ +static unsigned int sunzilog_get_mctrl(struct uart_port *port) +{ + unsigned char status; + unsigned int ret; + + status = sunzilog_read_channel_status(port); + + ret = 0; + if (status & DCD) + ret |= TIOCM_CAR; + if (status & SYNC) + ret |= TIOCM_DSR; + if (status & CTS) + ret |= TIOCM_CTS; + + return ret; +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits; + + set_bits = clear_bits = 0; + + if (mctrl & TIOCM_RTS) + set_bits |= RTS; + else + clear_bits |= RTS; + if (mctrl & TIOCM_DTR) + set_bits |= DTR; + else + clear_bits |= DTR; + + /* NOTE: Not subject to 'transmitter active' rule. */ + up->curregs[R5] |= set_bits; + up->curregs[R5] &= ~clear_bits; + write_zsreg(channel, R5, up->curregs[R5]); +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + + up->flags |= SUNZILOG_FLAG_TX_STOPPED; +} + +/* The port lock is held and interrupts are disabled. */ +static void sunzilog_start_tx(struct uart_port *port, unsigned int tty_start) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char status; + + up->flags |= SUNZILOG_FLAG_TX_ACTIVE; + up->flags &= ~SUNZILOG_FLAG_TX_STOPPED; + + status = sbus_readb(&channel->control); + ZSDELAY(); + + /* TX busy? Just wait for the TX done interrupt. */ + if (!(status & Tx_BUF_EMP)) + return; + + /* Send the first character to jump-start the TX done + * IRQ sending engine. + */ + if (port->x_char) { + sbus_writeb(port->x_char, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + port->icount.tx++; + port->x_char = 0; + } else { + struct circ_buf *xmit = &port->info->xmit; + + sbus_writeb(xmit->buf[xmit->tail], &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + } +} + +/* The port lock is held. */ +static void sunzilog_stop_rx(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + struct zilog_channel __iomem *channel; + + if (ZS_IS_CONS(up)) + return; + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable all RX interrupts. */ + up->curregs[R1] &= ~RxINT_MASK; + sunzilog_maybe_update_regs(up, channel); +} + +/* The port lock is held. */ +static void sunzilog_enable_ms(struct uart_port *port) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char new_reg; + + new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE); + if (new_reg != up->curregs[R15]) { + up->curregs[R15] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R15, up->curregs[R15]); + } +} + +/* The port lock is not held. */ +static void sunzilog_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port); + unsigned char set_bits, clear_bits, new_reg; + unsigned long flags; + + set_bits = clear_bits = 0; + + if (break_state) + set_bits |= SND_BRK; + else + clear_bits |= SND_BRK; + + spin_lock_irqsave(&port->lock, flags); + + new_reg = (up->curregs[R5] | set_bits) & ~clear_bits; + if (new_reg != up->curregs[R5]) { + up->curregs[R5] = new_reg; + + /* NOTE: Not subject to 'transmitter active' rule. */ + write_zsreg(channel, R5, up->curregs[R5]); + } + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void __sunzilog_startup(struct uart_sunzilog_port *up) +{ + struct zilog_channel __iomem *channel; + + channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + up->prev_status = sbus_readb(&channel->control); + + /* Enable receiver and transmitter. */ + up->curregs[R3] |= RxENAB; + up->curregs[R5] |= TxENAB; + + up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + sunzilog_maybe_update_regs(up, channel); +} + +static int sunzilog_startup(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + unsigned long flags; + + if (ZS_IS_CONS(up)) + return 0; + + spin_lock_irqsave(&port->lock, flags); + __sunzilog_startup(up); + spin_unlock_irqrestore(&port->lock, flags); + return 0; +} + +/* + * The test for ZS_IS_CONS is explained by the following e-mail: + ***** + * From: Russell King + * Date: Sun, 8 Dec 2002 10:18:38 +0000 + * + * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote: + * > I boot my 2.5 boxes using "console=ttyS0,9600" argument, + * > and I noticed that something is not right with reference + * > counting in this case. It seems that when the console + * > is open by kernel initially, this is not accounted + * > as an open, and uart_startup is not called. + * + * That is correct. We are unable to call uart_startup when the serial + * console is initialised because it may need to allocate memory (as + * request_irq does) and the memory allocators may not have been + * initialised. + * + * 1. initialise the port into a state where it can send characters in the + * console write method. + * + * 2. don't do the actual hardware shutdown in your shutdown() method (but + * do the normal software shutdown - ie, free irqs etc) + ***** + */ +static void sunzilog_shutdown(struct uart_port *port) +{ + struct uart_sunzilog_port *up = UART_ZILOG(port); + struct zilog_channel __iomem *channel; + unsigned long flags; + + if (ZS_IS_CONS(up)) + return; + + spin_lock_irqsave(&port->lock, flags); + + channel = ZILOG_CHANNEL_FROM_PORT(port); + + /* Disable receiver and transmitter. */ + up->curregs[R3] &= ~RxENAB; + up->curregs[R5] &= ~TxENAB; + + /* Disable all interrupts and BRK assertion. */ + up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK); + up->curregs[R5] &= ~SND_BRK; + sunzilog_maybe_update_regs(up, channel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Shared by TTY driver and serial console setup. The port lock is held + * and local interrupts are disabled. + */ +static void +sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag, + unsigned int iflag, int brg) +{ + + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + + /* Program BAUD and clock source. */ + up->curregs[R4] &= ~XCLK_MASK; + up->curregs[R4] |= X16CLK; + up->curregs[R12] = brg & 0xff; + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRSRC | BRENAB; + + /* Character size, stop bits, and parity. */ + up->curregs[3] &= ~RxN_MASK; + up->curregs[5] &= ~TxN_MASK; + switch (cflag & CSIZE) { + case CS5: + up->curregs[3] |= Rx5; + up->curregs[5] |= Tx5; + up->parity_mask = 0x1f; + break; + case CS6: + up->curregs[3] |= Rx6; + up->curregs[5] |= Tx6; + up->parity_mask = 0x3f; + break; + case CS7: + up->curregs[3] |= Rx7; + up->curregs[5] |= Tx7; + up->parity_mask = 0x7f; + break; + case CS8: + default: + up->curregs[3] |= Rx8; + up->curregs[5] |= Tx8; + up->parity_mask = 0xff; + break; + }; + up->curregs[4] &= ~0x0c; + if (cflag & CSTOPB) + up->curregs[4] |= SB2; + else + up->curregs[4] |= SB1; + if (cflag & PARENB) + up->curregs[4] |= PAR_ENAB; + else + up->curregs[4] &= ~PAR_ENAB; + if (!(cflag & PARODD)) + up->curregs[4] |= PAR_EVEN; + else + up->curregs[4] &= ~PAR_EVEN; + + up->port.read_status_mask = Rx_OVR; + if (iflag & INPCK) + up->port.read_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & (BRKINT | PARMRK)) + up->port.read_status_mask |= BRK_ABRT; + + up->port.ignore_status_mask = 0; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= CRC_ERR | PAR_ERR; + if (iflag & IGNBRK) { + up->port.ignore_status_mask |= BRK_ABRT; + if (iflag & IGNPAR) + up->port.ignore_status_mask |= Rx_OVR; + } + + if ((cflag & CREAD) == 0) + up->port.ignore_status_mask = 0xff; +} + +/* The port lock is not held. */ +static void +sunzilog_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + unsigned long flags; + int baud, brg; + + baud = uart_get_baud_rate(port, termios, old, 1200, 76800); + + spin_lock_irqsave(&up->port.lock, flags); + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg); + + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->flags |= SUNZILOG_FLAG_MODEM_STATUS; + else + up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS; + + up->cflag = termios->c_cflag; + + sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port)); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static const char *sunzilog_type(struct uart_port *port) +{ + return "SunZilog"; +} + +/* We do not request/release mappings of the registers here, this + * happens at early serial probe time. + */ +static void sunzilog_release_port(struct uart_port *port) +{ +} + +static int sunzilog_request_port(struct uart_port *port) +{ + return 0; +} + +/* These do not need to do anything interesting either. */ +static void sunzilog_config_port(struct uart_port *port, int flags) +{ +} + +/* We do not support letting the user mess with the divisor, IRQ, etc. */ +static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return -EINVAL; +} + +static struct uart_ops sunzilog_pops = { + .tx_empty = sunzilog_tx_empty, + .set_mctrl = sunzilog_set_mctrl, + .get_mctrl = sunzilog_get_mctrl, + .stop_tx = sunzilog_stop_tx, + .start_tx = sunzilog_start_tx, + .stop_rx = sunzilog_stop_rx, + .enable_ms = sunzilog_enable_ms, + .break_ctl = sunzilog_break_ctl, + .startup = sunzilog_startup, + .shutdown = sunzilog_shutdown, + .set_termios = sunzilog_set_termios, + .type = sunzilog_type, + .release_port = sunzilog_release_port, + .request_port = sunzilog_request_port, + .config_port = sunzilog_config_port, + .verify_port = sunzilog_verify_port, +}; + +static struct uart_sunzilog_port *sunzilog_port_table; +static struct zilog_layout __iomem **sunzilog_chip_regs; + +static struct uart_sunzilog_port *sunzilog_irq_chain; +static int zilog_irq = -1; + +static struct uart_driver sunzilog_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyS", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, +}; + +static void * __init alloc_one_table(unsigned long size) +{ + void *ret; + + ret = kmalloc(size, GFP_KERNEL); + if (ret != NULL) + memset(ret, 0, size); + + return ret; +} + +static void __init sunzilog_alloc_tables(void) +{ + sunzilog_port_table = + alloc_one_table(NUM_CHANNELS * sizeof(struct uart_sunzilog_port)); + sunzilog_chip_regs = + alloc_one_table(NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *)); + + if (sunzilog_port_table == NULL || sunzilog_chip_regs == NULL) { + prom_printf("SunZilog: Cannot allocate tables.\n"); + prom_halt(); + } +} + +#ifdef CONFIG_SPARC64 + +/* We used to attempt to use the address property of the Zilog device node + * but that totally is not necessary on sparc64. + */ +static struct zilog_layout __iomem * __init get_zs_sun4u(int chip, int zsnode) +{ + unsigned long mapped_addr; + unsigned int sun4u_ino; + struct sbus_bus *sbus = NULL; + struct sbus_dev *sdev = NULL; + int err; + + if (central_bus == NULL) { + for_each_sbus(sbus) { + for_each_sbusdev(sdev, sbus) { + if (sdev->prom_node == zsnode) + goto found; + } + } + } + found: + if (sdev == NULL && central_bus == NULL) { + prom_printf("SunZilog: sdev&¢ral == NULL for " + "Zilog %d in get_zs_sun4u.\n", chip); + prom_halt(); + } + if (central_bus == NULL) { + mapped_addr = + sbus_ioremap(&sdev->resource[0], 0, + PAGE_SIZE, + "Zilog Registers"); + } else { + struct linux_prom_registers zsregs[1]; + + err = prom_getproperty(zsnode, "reg", + (char *) &zsregs[0], + sizeof(zsregs)); + if (err == -1) { + prom_printf("SunZilog: Cannot map " + "Zilog %d regs on " + "central bus.\n", chip); + prom_halt(); + } + apply_fhc_ranges(central_bus->child, + &zsregs[0], 1); + apply_central_ranges(central_bus, &zsregs[0], 1); + mapped_addr = + (((u64)zsregs[0].which_io)<<32UL) | + ((u64)zsregs[0].phys_addr); + } + + if (zilog_irq == -1) { + if (central_bus) { + unsigned long iclr, imap; + + iclr = central_bus->child->fhc_regs.uregs + + FHC_UREGS_ICLR; + imap = central_bus->child->fhc_regs.uregs + + FHC_UREGS_IMAP; + zilog_irq = build_irq(12, 0, iclr, imap); + } else { + err = prom_getproperty(zsnode, "interrupts", + (char *) &sun4u_ino, + sizeof(sun4u_ino)); + zilog_irq = sbus_build_irq(sbus_root, sun4u_ino); + } + } + + return (struct zilog_layout __iomem *) mapped_addr; +} +#else /* CONFIG_SPARC64 */ + +/* + * XXX The sun4d case is utterly screwed: it tries to re-walk the tree + * (for the 3rd time) in order to find bootbus and cpu. Streamline it. + */ +static struct zilog_layout __iomem * __init get_zs_sun4cmd(int chip, int node) +{ + struct linux_prom_irqs irq_info[2]; + void __iomem *mapped_addr = NULL; + int zsnode, cpunode, bbnode; + struct linux_prom_registers zsreg[4]; + struct resource res; + + if (sparc_cpu_model == sun4d) { + int walk; + + zsnode = 0; + bbnode = 0; + cpunode = 0; + for (walk = prom_getchild(prom_root_node); + (walk = prom_searchsiblings(walk, "cpu-unit")) != 0; + walk = prom_getsibling(walk)) { + bbnode = prom_getchild(walk); + if (bbnode && + (bbnode = prom_searchsiblings(bbnode, "bootbus"))) { + if ((zsnode = prom_getchild(bbnode)) == node) { + cpunode = walk; + break; + } + } + } + if (!walk) { + prom_printf("SunZilog: Cannot find the %d'th bootbus on sun4d.\n", + (chip / 2)); + prom_halt(); + } + + if (prom_getproperty(zsnode, "reg", + (char *) zsreg, sizeof(zsreg)) == -1) { + prom_printf("SunZilog: Cannot map Zilog %d\n", chip); + prom_halt(); + } + /* XXX Looks like an off by one? */ + prom_apply_generic_ranges(bbnode, cpunode, zsreg, 1); + res.start = zsreg[0].phys_addr; + res.end = res.start + (8 - 1); + res.flags = zsreg[0].which_io | IORESOURCE_IO; + mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial"); + + } else { + zsnode = node; + +#if 0 /* XXX When was this used? */ + if (prom_getintdefault(zsnode, "slave", -1) != chipid) { + zsnode = prom_getsibling(zsnode); + continue; + } +#endif + + /* + * "address" is only present on ports that OBP opened + * (from Mitch Bradley's "Hitchhiker's Guide to OBP"). + * We do not use it. + */ + + if (prom_getproperty(zsnode, "reg", + (char *) zsreg, sizeof(zsreg)) == -1) { + prom_printf("SunZilog: Cannot map Zilog %d\n", chip); + prom_halt(); + } + if (sparc_cpu_model == sun4m) /* Crude. Pass parent. XXX */ + prom_apply_obio_ranges(zsreg, 1); + res.start = zsreg[0].phys_addr; + res.end = res.start + (8 - 1); + res.flags = zsreg[0].which_io | IORESOURCE_IO; + mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial"); + } + + if (prom_getproperty(zsnode, "intr", + (char *) irq_info, sizeof(irq_info)) + % sizeof(struct linux_prom_irqs)) { + prom_printf("SunZilog: Cannot get IRQ property for Zilog %d.\n", + chip); + prom_halt(); + } + if (zilog_irq == -1) { + zilog_irq = irq_info[0].pri; + } else if (zilog_irq != irq_info[0].pri) { + /* XXX. Dumb. Should handle per-chip IRQ, for add-ons. */ + prom_printf("SunZilog: Inconsistent IRQ layout for Zilog %d.\n", + chip); + prom_halt(); + } + + return (struct zilog_layout __iomem *) mapped_addr; +} +#endif /* !(CONFIG_SPARC64) */ + +/* Get the address of the registers for SunZilog instance CHIP. */ +static struct zilog_layout __iomem * __init get_zs(int chip, int node) +{ + if (chip < 0 || chip >= NUM_SUNZILOG) { + prom_printf("SunZilog: Illegal chip number %d in get_zs.\n", chip); + prom_halt(); + } + +#ifdef CONFIG_SPARC64 + return get_zs_sun4u(chip, node); +#else + + if (sparc_cpu_model == sun4) { + struct resource res; + + /* Not probe-able, hard code it. */ + switch (chip) { + case 0: + res.start = 0xf1000000; + break; + case 1: + res.start = 0xf0000000; + break; + }; + zilog_irq = 12; + res.end = (res.start + (8 - 1)); + res.flags = IORESOURCE_IO; + return sbus_ioremap(&res, 0, 8, "SunZilog"); + } + + return get_zs_sun4cmd(chip, node); +#endif +} + +#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */ + +static void sunzilog_put_char(struct zilog_channel __iomem *channel, unsigned char ch) +{ + int loops = ZS_PUT_CHAR_MAX_DELAY; + + /* This is a timed polling loop so do not switch the explicit + * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM + */ + do { + unsigned char val = sbus_readb(&channel->control); + if (val & Tx_BUF_EMP) { + ZSDELAY(); + break; + } + udelay(5); + } while (--loops); + + sbus_writeb(ch, &channel->data); + ZSDELAY(); + ZS_WSYNC(channel); +} + +#ifdef CONFIG_SERIO + +static DEFINE_SPINLOCK(sunzilog_serio_lock); + +static int sunzilog_serio_write(struct serio *serio, unsigned char ch) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + + sunzilog_put_char(ZILOG_CHANNEL_FROM_PORT(&up->port), ch); + + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); + + return 0; +} + +static int sunzilog_serio_open(struct serio *serio) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + int ret; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + if (!up->serio_open) { + up->serio_open = 1; + ret = 0; + } else + ret = -EBUSY; + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); + + return ret; +} + +static void sunzilog_serio_close(struct serio *serio) +{ + struct uart_sunzilog_port *up = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&sunzilog_serio_lock, flags); + up->serio_open = 0; + spin_unlock_irqrestore(&sunzilog_serio_lock, flags); +} + +#endif /* CONFIG_SERIO */ + +#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE +static void +sunzilog_console_write(struct console *con, const char *s, unsigned int count) +{ + struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; + struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + unsigned long flags; + int i; + + spin_lock_irqsave(&up->port.lock, flags); + for (i = 0; i < count; i++, s++) { + sunzilog_put_char(channel, *s); + if (*s == 10) + sunzilog_put_char(channel, 13); + } + udelay(2); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int __init sunzilog_console_setup(struct console *con, char *options) +{ + struct uart_sunzilog_port *up = &sunzilog_port_table[con->index]; + unsigned long flags; + int baud, brg; + + printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n", + (sunzilog_reg.minor - 64) + con->index, con->index); + + /* Get firmware console settings. */ + sunserial_console_termios(con); + + /* Firmware console speed is limited to 150-->38400 baud so + * this hackish cflag thing is OK. + */ + switch (con->cflag & CBAUD) { + case B150: baud = 150; break; + case B300: baud = 300; break; + case B600: baud = 600; break; + case B1200: baud = 1200; break; + case B2400: baud = 2400; break; + case B4800: baud = 4800; break; + default: case B9600: baud = 9600; break; + case B19200: baud = 19200; break; + case B38400: baud = 38400; break; + }; + + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + + spin_lock_irqsave(&up->port.lock, flags); + + up->curregs[R15] = BRKIE; + sunzilog_convert_to_zs(up, con->cflag, 0, brg); + + sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + __sunzilog_startup(up); + + spin_unlock_irqrestore(&up->port.lock, flags); + + return 0; +} + +static struct console sunzilog_console = { + .name = "ttyS", + .write = sunzilog_console_write, + .device = uart_console_device, + .setup = sunzilog_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &sunzilog_reg, +}; +#define SUNZILOG_CONSOLE (&sunzilog_console) + +static int __init sunzilog_console_init(void) +{ + int i; + + if (con_is_present()) + return 0; + + for (i = 0; i < NUM_CHANNELS; i++) { + int this_minor = sunzilog_reg.minor + i; + + if ((this_minor - 64) == (serial_console - 1)) + break; + } + if (i == NUM_CHANNELS) + return 0; + + sunzilog_console.index = i; + sunzilog_port_table[i].flags |= SUNZILOG_FLAG_IS_CONS; + register_console(&sunzilog_console); + return 0; +} +#else +#define SUNZILOG_CONSOLE (NULL) +#define sunzilog_console_init() do { } while (0) +#endif + +/* + * We scan the PROM tree recursively. This is the most reliable way + * to find Zilog nodes on various platforms. However, we face an extreme + * shortage of kernel stack, so we must be very careful. To that end, + * we scan only to a certain depth, and we use a common property buffer + * in the scan structure. + */ +#define ZS_PROPSIZE 128 +#define ZS_SCAN_DEPTH 5 + +struct zs_probe_scan { + int depth; + void (*scanner)(struct zs_probe_scan *t, int node); + + int devices; + char prop[ZS_PROPSIZE]; +}; + +static int __inline__ sunzilog_node_ok(int node, const char *name, int len) +{ + if (strncmp(name, "zs", len) == 0) + return 1; + /* Don't fold this procedure just yet. Compare to su_node_ok(). */ + return 0; +} + +static void __init sunzilog_scan(struct zs_probe_scan *t, int node) +{ + int len; + + for (; node != 0; node = prom_getsibling(node)) { + len = prom_getproperty(node, "name", t->prop, ZS_PROPSIZE); + if (len <= 1) + continue; /* Broken PROM node */ + if (sunzilog_node_ok(node, t->prop, len)) { + (*t->scanner)(t, node); + } else { + if (t->depth < ZS_SCAN_DEPTH) { + t->depth++; + sunzilog_scan(t, prom_getchild(node)); + --t->depth; + } + } + } +} + +static void __init sunzilog_prepare(void) +{ + struct uart_sunzilog_port *up; + struct zilog_layout __iomem *rp; + int channel, chip; + + /* + * Temporary fix. + */ + for (channel = 0; channel < NUM_CHANNELS; channel++) + spin_lock_init(&sunzilog_port_table[channel].port.lock); + + sunzilog_irq_chain = up = &sunzilog_port_table[0]; + for (channel = 0; channel < NUM_CHANNELS - 1; channel++) + up[channel].next = &up[channel + 1]; + up[channel].next = NULL; + + for (chip = 0; chip < NUM_SUNZILOG; chip++) { + rp = sunzilog_chip_regs[chip]; + up[(chip * 2) + 0].port.membase = (void __iomem *)&rp->channelA; + up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB; + + /* Channel A */ + up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM; + up[(chip * 2) + 0].port.irq = zilog_irq; + up[(chip * 2) + 0].port.uartclk = ZS_CLOCK; + up[(chip * 2) + 0].port.fifosize = 1; + up[(chip * 2) + 0].port.ops = &sunzilog_pops; + up[(chip * 2) + 0].port.type = PORT_SUNZILOG; + up[(chip * 2) + 0].port.flags = 0; + up[(chip * 2) + 0].port.line = (chip * 2) + 0; + up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A; + + /* Channel B */ + up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM; + up[(chip * 2) + 1].port.irq = zilog_irq; + up[(chip * 2) + 1].port.uartclk = ZS_CLOCK; + up[(chip * 2) + 1].port.fifosize = 1; + up[(chip * 2) + 1].port.ops = &sunzilog_pops; + up[(chip * 2) + 1].port.type = PORT_SUNZILOG; + up[(chip * 2) + 1].port.flags = 0; + up[(chip * 2) + 1].port.line = (chip * 2) + 1; + up[(chip * 2) + 1].flags |= 0; + } +} + +static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel) +{ + int baud, brg; + + if (channel == KEYBOARD_LINE) { + up->flags |= SUNZILOG_FLAG_CONS_KEYB; + up->cflag = B1200 | CS8 | CLOCAL | CREAD; + baud = 1200; + } else { + up->flags |= SUNZILOG_FLAG_CONS_MOUSE; + up->cflag = B4800 | CS8 | CLOCAL | CREAD; + baud = 4800; + } + printk(KERN_INFO "zs%d at 0x%p (irq = %s) is a SunZilog\n", + channel, up->port.membase, __irq_itoa(zilog_irq)); + + up->curregs[R15] = BRKIE; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + sunzilog_convert_to_zs(up, up->cflag, 0, brg); + sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS); + __sunzilog_startup(up); +} + +#ifdef CONFIG_SERIO +static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel) +{ + struct serio *serio; + + up->serio = serio = kmalloc(sizeof(struct serio), GFP_KERNEL); + if (serio) { + memset(serio, 0, sizeof(*serio)); + + serio->port_data = up; + + serio->id.type = SERIO_RS232; + if (channel == KEYBOARD_LINE) { + serio->id.proto = SERIO_SUNKBD; + strlcpy(serio->name, "zskbd", sizeof(serio->name)); + } else { + serio->id.proto = SERIO_SUN; + serio->id.extra = 1; + strlcpy(serio->name, "zsms", sizeof(serio->name)); + } + strlcpy(serio->phys, + (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"), + sizeof(serio->phys)); + + serio->write = sunzilog_serio_write; + serio->open = sunzilog_serio_open; + serio->close = sunzilog_serio_close; + + serio_register_port(serio); + } else { + printk(KERN_WARNING "zs%d: not enough memory for serio port\n", + channel); + } +} +#endif + +static void __init sunzilog_init_hw(void) +{ + int i; + + for (i = 0; i < NUM_CHANNELS; i++) { + struct uart_sunzilog_port *up = &sunzilog_port_table[i]; + struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(&up->port); + unsigned long flags; + int baud, brg; + + spin_lock_irqsave(&up->port.lock, flags); + + if (ZS_IS_CHANNEL_A(up)) { + write_zsreg(channel, R9, FHWRES); + ZSDELAY_LONG(); + (void) read_zsreg(channel, R0); + } + + if (i == KEYBOARD_LINE || i == MOUSE_LINE) { + sunzilog_init_kbdms(up, i); + up->curregs[R9] |= (NV | MIE); + write_zsreg(channel, R9, up->curregs[R9]); + } else { + /* Normal serial TTY. */ + up->parity_mask = 0xff; + up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB; + up->curregs[R4] = PAR_EVEN | X16CLK | SB1; + up->curregs[R3] = RxENAB | Rx8; + up->curregs[R5] = TxENAB | Tx8; + up->curregs[R9] = NV | MIE; + up->curregs[R10] = NRZ; + up->curregs[R11] = TCBR | RCBR; + baud = 9600; + brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR); + up->curregs[R12] = (brg & 0xff); + up->curregs[R13] = (brg >> 8) & 0xff; + up->curregs[R14] = BRSRC | BRENAB; + __load_zsregs(channel, up->curregs); + write_zsreg(channel, R9, up->curregs[R9]); + } + + spin_unlock_irqrestore(&up->port.lock, flags); + +#ifdef CONFIG_SERIO + if (i == KEYBOARD_LINE || i == MOUSE_LINE) + sunzilog_register_serio(up, i); +#endif + } +} + +static struct zilog_layout __iomem * __init get_zs(int chip, int node); + +static void __init sunzilog_scan_probe(struct zs_probe_scan *t, int node) +{ + sunzilog_chip_regs[t->devices] = get_zs(t->devices, node); + t->devices++; +} + +static int __init sunzilog_ports_init(void) +{ + struct zs_probe_scan scan; + int ret; + int uart_count; + int i; + + printk(KERN_DEBUG "SunZilog: %d chips.\n", NUM_SUNZILOG); + + scan.scanner = sunzilog_scan_probe; + scan.depth = 0; + scan.devices = 0; + sunzilog_scan(&scan, prom_getchild(prom_root_node)); + + sunzilog_prepare(); + + if (request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ, + "SunZilog", sunzilog_irq_chain)) { + prom_printf("SunZilog: Unable to register zs interrupt handler.\n"); + prom_halt(); + } + + sunzilog_init_hw(); + + /* We can only init this once we have probed the Zilogs + * in the system. Do not count channels assigned to keyboards + * or mice when we are deciding how many ports to register. + */ + uart_count = 0; + for (i = 0; i < NUM_CHANNELS; i++) { + struct uart_sunzilog_port *up = &sunzilog_port_table[i]; + + if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) + continue; + + uart_count++; + } + + sunzilog_reg.nr = uart_count; + sunzilog_reg.cons = SUNZILOG_CONSOLE; + + sunzilog_reg.minor = sunserial_current_minor; + sunserial_current_minor += uart_count; + + ret = uart_register_driver(&sunzilog_reg); + if (ret == 0) { + sunzilog_console_init(); + for (i = 0; i < NUM_CHANNELS; i++) { + struct uart_sunzilog_port *up = &sunzilog_port_table[i]; + + if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) + continue; + + if (uart_add_one_port(&sunzilog_reg, &up->port)) { + printk(KERN_ERR + "SunZilog: failed to add port zs%d\n", i); + } + } + } + + return ret; +} + +static void __init sunzilog_scan_count(struct zs_probe_scan *t, int node) +{ + t->devices++; +} + +static int __init sunzilog_ports_count(void) +{ + struct zs_probe_scan scan; + + /* Sun4 Zilog setup is hard coded, no probing to do. */ + if (sparc_cpu_model == sun4) + return 2; + + scan.scanner = sunzilog_scan_count; + scan.depth = 0; + scan.devices = 0; + + sunzilog_scan(&scan, prom_getchild(prom_root_node)); + + return scan.devices; +} + +static int __init sunzilog_init(void) +{ + + NUM_SUNZILOG = sunzilog_ports_count(); + if (NUM_SUNZILOG == 0) + return -ENODEV; + + sunzilog_alloc_tables(); + + sunzilog_ports_init(); + + return 0; +} + +static void __exit sunzilog_exit(void) +{ + int i; + + for (i = 0; i < NUM_CHANNELS; i++) { + struct uart_sunzilog_port *up = &sunzilog_port_table[i]; + + if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) { +#ifdef CONFIG_SERIO + if (up->serio) { + serio_unregister_port(up->serio); + up->serio = NULL; + } +#endif + } else + uart_remove_one_port(&sunzilog_reg, &up->port); + } + + uart_unregister_driver(&sunzilog_reg); +} + +module_init(sunzilog_init); +module_exit(sunzilog_exit); + +MODULE_AUTHOR("David S. Miller"); +MODULE_DESCRIPTION("Sun Zilog serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunzilog.h b/drivers/serial/sunzilog.h new file mode 100644 index 000000000000..7939b6d71270 --- /dev/null +++ b/drivers/serial/sunzilog.h @@ -0,0 +1,272 @@ +#ifndef _SUNZILOG_H +#define _SUNZILOG_H + +struct zilog_channel { + volatile unsigned char control; + volatile unsigned char __pad1; + volatile unsigned char data; + volatile unsigned char __pad2; +}; + +struct zilog_layout { + struct zilog_channel channelB; + struct zilog_channel channelA; +}; + +#define NUM_ZSREGS 16 + +/* Conversion routines to/from brg time constants from/to bits + * per second. + */ +#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2)) +#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2) + +/* The Zilog register set */ + +#define FLAG 0x7e + +/* Write Register 0 */ +#define R0 0 /* Register selects */ +#define R1 1 +#define R2 2 +#define R3 3 +#define R4 4 +#define R5 5 +#define R6 6 +#define R7 7 +#define R8 8 +#define R9 9 +#define R10 10 +#define R11 11 +#define R12 12 +#define R13 13 +#define R14 14 +#define R15 15 + +#define NULLCODE 0 /* Null Code */ +#define POINT_HIGH 0x8 /* Select upper half of registers */ +#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */ +#define SEND_ABORT 0x18 /* HDLC Abort */ +#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */ +#define RES_Tx_P 0x28 /* Reset TxINT Pending */ +#define ERR_RES 0x30 /* Error Reset */ +#define RES_H_IUS 0x38 /* Reset highest IUS */ + +#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */ +#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */ +#define RES_EOM_L 0xC0 /* Reset EOM latch */ + +/* Write Register 1 */ + +#define EXT_INT_ENAB 0x1 /* Ext Int Enable */ +#define TxINT_ENAB 0x2 /* Tx Int Enable */ +#define PAR_SPEC 0x4 /* Parity is special condition */ + +#define RxINT_DISAB 0 /* Rx Int Disable */ +#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */ +#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */ +#define INT_ERR_Rx 0x18 /* Int on error only */ +#define RxINT_MASK 0x18 + +#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */ +#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */ +#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */ + +/* Write Register #2 (Interrupt Vector) */ + +/* Write Register 3 */ + +#define RxENAB 0x1 /* Rx Enable */ +#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */ +#define ADD_SM 0x4 /* Address Search Mode (SDLC) */ +#define RxCRC_ENAB 0x8 /* Rx CRC Enable */ +#define ENT_HM 0x10 /* Enter Hunt Mode */ +#define AUTO_ENAB 0x20 /* Auto Enables */ +#define Rx5 0x0 /* Rx 5 Bits/Character */ +#define Rx7 0x40 /* Rx 7 Bits/Character */ +#define Rx6 0x80 /* Rx 6 Bits/Character */ +#define Rx8 0xc0 /* Rx 8 Bits/Character */ +#define RxN_MASK 0xc0 + +/* Write Register 4 */ + +#define PAR_ENAB 0x1 /* Parity Enable */ +#define PAR_EVEN 0x2 /* Parity Even/Odd* */ + +#define SYNC_ENAB 0 /* Sync Modes Enable */ +#define SB1 0x4 /* 1 stop bit/char */ +#define SB15 0x8 /* 1.5 stop bits/char */ +#define SB2 0xc /* 2 stop bits/char */ + +#define MONSYNC 0 /* 8 Bit Sync character */ +#define BISYNC 0x10 /* 16 bit sync character */ +#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */ +#define EXTSYNC 0x30 /* External Sync Mode */ + +#define X1CLK 0x0 /* x1 clock mode */ +#define X16CLK 0x40 /* x16 clock mode */ +#define X32CLK 0x80 /* x32 clock mode */ +#define X64CLK 0xC0 /* x64 clock mode */ +#define XCLK_MASK 0xC0 + +/* Write Register 5 */ + +#define TxCRC_ENAB 0x1 /* Tx CRC Enable */ +#define RTS 0x2 /* RTS */ +#define SDLC_CRC 0x4 /* SDLC/CRC-16 */ +#define TxENAB 0x8 /* Tx Enable */ +#define SND_BRK 0x10 /* Send Break */ +#define Tx5 0x0 /* Tx 5 bits (or less)/character */ +#define Tx7 0x20 /* Tx 7 bits/character */ +#define Tx6 0x40 /* Tx 6 bits/character */ +#define Tx8 0x60 /* Tx 8 bits/character */ +#define TxN_MASK 0x60 +#define DTR 0x80 /* DTR */ + +/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */ + +/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */ + +/* Write Register 8 (transmit buffer) */ + +/* Write Register 9 (Master interrupt control) */ +#define VIS 1 /* Vector Includes Status */ +#define NV 2 /* No Vector */ +#define DLC 4 /* Disable Lower Chain */ +#define MIE 8 /* Master Interrupt Enable */ +#define STATHI 0x10 /* Status high */ +#define NORESET 0 /* No reset on write to R9 */ +#define CHRB 0x40 /* Reset channel B */ +#define CHRA 0x80 /* Reset channel A */ +#define FHWRES 0xc0 /* Force hardware reset */ + +/* Write Register 10 (misc control bits) */ +#define BIT6 1 /* 6 bit/8bit sync */ +#define LOOPMODE 2 /* SDLC Loop mode */ +#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */ +#define MARKIDLE 8 /* Mark/flag on idle */ +#define GAOP 0x10 /* Go active on poll */ +#define NRZ 0 /* NRZ mode */ +#define NRZI 0x20 /* NRZI mode */ +#define FM1 0x40 /* FM1 (transition = 1) */ +#define FM0 0x60 /* FM0 (transition = 0) */ +#define CRCPS 0x80 /* CRC Preset I/O */ + +/* Write Register 11 (Clock Mode control) */ +#define TRxCXT 0 /* TRxC = Xtal output */ +#define TRxCTC 1 /* TRxC = Transmit clock */ +#define TRxCBR 2 /* TRxC = BR Generator Output */ +#define TRxCDP 3 /* TRxC = DPLL output */ +#define TRxCOI 4 /* TRxC O/I */ +#define TCRTxCP 0 /* Transmit clock = RTxC pin */ +#define TCTRxCP 8 /* Transmit clock = TRxC pin */ +#define TCBR 0x10 /* Transmit clock = BR Generator output */ +#define TCDPLL 0x18 /* Transmit clock = DPLL output */ +#define RCRTxCP 0 /* Receive clock = RTxC pin */ +#define RCTRxCP 0x20 /* Receive clock = TRxC pin */ +#define RCBR 0x40 /* Receive clock = BR Generator output */ +#define RCDPLL 0x60 /* Receive clock = DPLL output */ +#define RTxCX 0x80 /* RTxC Xtal/No Xtal */ + +/* Write Register 12 (lower byte of baud rate generator time constant) */ + +/* Write Register 13 (upper byte of baud rate generator time constant) */ + +/* Write Register 14 (Misc control bits) */ +#define BRENAB 1 /* Baud rate generator enable */ +#define BRSRC 2 /* Baud rate generator source */ +#define DTRREQ 4 /* DTR/Request function */ +#define AUTOECHO 8 /* Auto Echo */ +#define LOOPBAK 0x10 /* Local loopback */ +#define SEARCH 0x20 /* Enter search mode */ +#define RMC 0x40 /* Reset missing clock */ +#define DISDPLL 0x60 /* Disable DPLL */ +#define SSBR 0x80 /* Set DPLL source = BR generator */ +#define SSRTxC 0xa0 /* Set DPLL source = RTxC */ +#define SFMM 0xc0 /* Set FM mode */ +#define SNRZI 0xe0 /* Set NRZI mode */ + +/* Write Register 15 (external/status interrupt control) */ +#define ZCIE 2 /* Zero count IE */ +#define DCDIE 8 /* DCD IE */ +#define SYNCIE 0x10 /* Sync/hunt IE */ +#define CTSIE 0x20 /* CTS IE */ +#define TxUIE 0x40 /* Tx Underrun/EOM IE */ +#define BRKIE 0x80 /* Break/Abort IE */ + + +/* Read Register 0 */ +#define Rx_CH_AV 0x1 /* Rx Character Available */ +#define ZCOUNT 0x2 /* Zero count */ +#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */ +#define DCD 0x8 /* DCD */ +#define SYNC 0x10 /* Sync/hunt */ +#define CTS 0x20 /* CTS */ +#define TxEOM 0x40 /* Tx underrun */ +#define BRK_ABRT 0x80 /* Break/Abort */ + +/* Read Register 1 */ +#define ALL_SNT 0x1 /* All sent */ +/* Residue Data for 8 Rx bits/char programmed */ +#define RES3 0x8 /* 0/3 */ +#define RES4 0x4 /* 0/4 */ +#define RES5 0xc /* 0/5 */ +#define RES6 0x2 /* 0/6 */ +#define RES7 0xa /* 0/7 */ +#define RES8 0x6 /* 0/8 */ +#define RES18 0xe /* 1/8 */ +#define RES28 0x0 /* 2/8 */ +/* Special Rx Condition Interrupts */ +#define PAR_ERR 0x10 /* Parity error */ +#define Rx_OVR 0x20 /* Rx Overrun Error */ +#define CRC_ERR 0x40 /* CRC/Framing Error */ +#define END_FR 0x80 /* End of Frame (SDLC) */ + +/* Read Register 2 (channel b only) - Interrupt vector */ +#define CHB_Tx_EMPTY 0x00 +#define CHB_EXT_STAT 0x02 +#define CHB_Rx_AVAIL 0x04 +#define CHB_SPECIAL 0x06 +#define CHA_Tx_EMPTY 0x08 +#define CHA_EXT_STAT 0x0a +#define CHA_Rx_AVAIL 0x0c +#define CHA_SPECIAL 0x0e +#define STATUS_MASK 0x0e + +/* Read Register 3 (interrupt pending register) ch a only */ +#define CHBEXT 0x1 /* Channel B Ext/Stat IP */ +#define CHBTxIP 0x2 /* Channel B Tx IP */ +#define CHBRxIP 0x4 /* Channel B Rx IP */ +#define CHAEXT 0x8 /* Channel A Ext/Stat IP */ +#define CHATxIP 0x10 /* Channel A Tx IP */ +#define CHARxIP 0x20 /* Channel A Rx IP */ + +/* Read Register 8 (receive data register) */ + +/* Read Register 10 (misc status bits) */ +#define ONLOOP 2 /* On loop */ +#define LOOPSEND 0x10 /* Loop sending */ +#define CLK2MIS 0x40 /* Two clocks missing */ +#define CLK1MIS 0x80 /* One clock missing */ + +/* Read Register 12 (lower byte of baud rate generator constant) */ + +/* Read Register 13 (upper byte of baud rate generator constant) */ + +/* Read Register 15 (value of WR 15) */ + +/* Misc macros */ +#define ZS_CLEARERR(channel) do { sbus_writeb(ERR_RES, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARSTAT(channel) do { sbus_writeb(RES_EXT_INT, &channel->control); \ + udelay(5); } while(0) + +#define ZS_CLEARFIFO(channel) do { sbus_readb(&channel->data); \ + udelay(2); \ + sbus_readb(&channel->data); \ + udelay(2); \ + sbus_readb(&channel->data); \ + udelay(2); } while(0) + +#endif /* _SUNZILOG_H */ diff --git a/drivers/serial/uart00.c b/drivers/serial/uart00.c new file mode 100644 index 000000000000..186f1300cead --- /dev/null +++ b/drivers/serial/uart00.c @@ -0,0 +1,782 @@ +/* + * linux/drivers/serial/uart00.c + * + * Driver for UART00 serial ports + * + * Based on drivers/char/serial_amba.c, by ARM Limited & + * Deep Blue Solutions Ltd. + * Copyright 2001 Altera Corporation + * + * Update for 2.6.4 by Dirk Behme + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * $Id: uart00.c,v 1.35 2002/07/28 10:03:28 rmk Exp $ + * + */ +#include + +#if defined(CONFIG_SERIAL_UART00_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#define UART00_TYPE (volatile unsigned int*) +#include +#include + +#define UART_NR 2 + +#define SERIAL_UART00_NAME "ttyUA" +#define SERIAL_UART00_MAJOR 204 +#define SERIAL_UART00_MINOR 16 /* Temporary - will change in future */ +#define SERIAL_UART00_NR UART_NR +#define UART_PORT_SIZE 0x50 + +#define UART00_ISR_PASS_LIMIT 256 + +/* + * Access macros for the UART00 UARTs + */ +#define UART_GET_INT_STATUS(p) inl(UART_ISR((p)->membase)) +#define UART_PUT_IES(p, c) outl(c,UART_IES((p)->membase)) +#define UART_GET_IES(p) inl(UART_IES((p)->membase)) +#define UART_PUT_IEC(p, c) outl(c,UART_IEC((p)->membase)) +#define UART_GET_IEC(p) inl(UART_IEC((p)->membase)) +#define UART_PUT_CHAR(p, c) outl(c,UART_TD((p)->membase)) +#define UART_GET_CHAR(p) inl(UART_RD((p)->membase)) +#define UART_GET_RSR(p) inl(UART_RSR((p)->membase)) +#define UART_GET_RDS(p) inl(UART_RDS((p)->membase)) +#define UART_GET_MSR(p) inl(UART_MSR((p)->membase)) +#define UART_GET_MCR(p) inl(UART_MCR((p)->membase)) +#define UART_PUT_MCR(p, c) outl(c,UART_MCR((p)->membase)) +#define UART_GET_MC(p) inl(UART_MC((p)->membase)) +#define UART_PUT_MC(p, c) outl(c,UART_MC((p)->membase)) +#define UART_GET_TSR(p) inl(UART_TSR((p)->membase)) +#define UART_GET_DIV_HI(p) inl(UART_DIV_HI((p)->membase)) +#define UART_PUT_DIV_HI(p,c) outl(c,UART_DIV_HI((p)->membase)) +#define UART_GET_DIV_LO(p) inl(UART_DIV_LO((p)->membase)) +#define UART_PUT_DIV_LO(p,c) outl(c,UART_DIV_LO((p)->membase)) +#define UART_RX_DATA(s) ((s) & UART_RSR_RX_LEVEL_MSK) +#define UART_TX_READY(s) (((s) & UART_TSR_TX_LEVEL_MSK) < 15) +//#define UART_TX_EMPTY(p) ((UART_GET_FR(p) & UART00_UARTFR_TMSK) == 0) + +static void uart00_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + UART_PUT_IEC(port, UART_IEC_TIE_MSK); +} + +static void uart00_stop_rx(struct uart_port *port) +{ + UART_PUT_IEC(port, UART_IEC_RE_MSK); +} + +static void uart00_enable_ms(struct uart_port *port) +{ + UART_PUT_IES(port, UART_IES_ME_MSK); +} + +static void +uart00_rx_chars(struct uart_port *port, struct pt_regs *regs) +{ + struct tty_struct *tty = port->info->tty; + unsigned int status, ch, rds, flg, ignored = 0; + + status = UART_GET_RSR(port); + while (UART_RX_DATA(status)) { + /* + * We need to read rds before reading the + * character from the fifo + */ + rds = UART_GET_RDS(port); + ch = UART_GET_CHAR(port); + port->icount.rx++; + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + goto ignore_char; + + flg = TTY_NORMAL; + + /* + * Note that the error handling code is + * out of the main execution path + */ + if (rds & (UART_RDS_BI_MSK |UART_RDS_FE_MSK| + UART_RDS_PE_MSK |UART_RDS_PE_MSK)) + goto handle_error; + if (uart_handle_sysrq_char(port, ch, regs)) + goto ignore_char; + + error_return: + tty_insert_flip_char(tty, ch, flg); + + ignore_char: + status = UART_GET_RSR(port); + } + out: + tty_flip_buffer_push(tty); + return; + + handle_error: + if (rds & UART_RDS_BI_MSK) { + status &= ~(UART_RDS_FE_MSK | UART_RDS_PE_MSK); + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } else if (rds & UART_RDS_PE_MSK) + port->icount.parity++; + else if (rds & UART_RDS_FE_MSK) + port->icount.frame++; + if (rds & UART_RDS_OE_MSK) + port->icount.overrun++; + + if (rds & port->ignore_status_mask) { + if (++ignored > 100) + goto out; + goto ignore_char; + } + rds &= port->read_status_mask; + + if (rds & UART_RDS_BI_MSK) + flg = TTY_BREAK; + else if (rds & UART_RDS_PE_MSK) + flg = TTY_PARITY; + else if (rds & UART_RDS_FE_MSK) + flg = TTY_FRAME; + + if (rds & UART_RDS_OE_MSK) { + /* + * CHECK: does overrun affect the current character? + * ASSUMPTION: it does not. + */ + tty_insert_flip_char(tty, ch, flg); + ch = 0; + flg = TTY_OVERRUN; + } +#ifdef SUPPORT_SYSRQ + port->sysrq = 0; +#endif + goto error_return; +} + +static void uart00_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + int count; + + if (port->x_char) { + while ((UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK) == 15) + barrier(); + UART_PUT_CHAR(port, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + uart00_stop_tx(port, 0); + return; + } + + count = port->fifosize >> 1; + do { + while ((UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK) == 15) + barrier(); + UART_PUT_CHAR(port, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + uart00_stop_tx(port, 0); +} + +static void uart00_start_tx(struct uart_port *port, unsigned int tty_start) +{ + UART_PUT_IES(port, UART_IES_TIE_MSK); + uart00_tx_chars(port); +} + +static void uart00_modem_status(struct uart_port *port) +{ + unsigned int status; + + status = UART_GET_MSR(port); + + if (!(status & (UART_MSR_DCTS_MSK | UART_MSR_DDSR_MSK | + UART_MSR_TERI_MSK | UART_MSR_DDCD_MSK))) + return; + + if (status & UART_MSR_DDCD_MSK) + uart_handle_dcd_change(port, status & UART_MSR_DCD_MSK); + + if (status & UART_MSR_DDSR_MSK) + port->icount.dsr++; + + if (status & UART_MSR_DCTS_MSK) + uart_handle_cts_change(port, status & UART_MSR_CTS_MSK); + + wake_up_interruptible(&port->info->delta_msr_wait); +} + +static irqreturn_t uart00_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port = dev_id; + unsigned int status, pass_counter = 0; + + status = UART_GET_INT_STATUS(port); + do { + if (status & UART_ISR_RI_MSK) + uart00_rx_chars(port, regs); + if (status & UART_ISR_MI_MSK) + uart00_modem_status(port); + if (status & (UART_ISR_TI_MSK | UART_ISR_TII_MSK)) + uart00_tx_chars(port); + if (pass_counter++ > UART00_ISR_PASS_LIMIT) + break; + + status = UART_GET_INT_STATUS(port); + } while (status); + + return IRQ_HANDLED; +} + +static unsigned int uart00_tx_empty(struct uart_port *port) +{ + return UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK? 0 : TIOCSER_TEMT; +} + +static unsigned int uart00_get_mctrl(struct uart_port *port) +{ + unsigned int result = 0; + unsigned int status; + + status = UART_GET_MSR(port); + if (status & UART_MSR_DCD_MSK) + result |= TIOCM_CAR; + if (status & UART_MSR_DSR_MSK) + result |= TIOCM_DSR; + if (status & UART_MSR_CTS_MSK) + result |= TIOCM_CTS; + if (status & UART_MSR_RI_MSK) + result |= TIOCM_RI; + + return result; +} + +static void uart00_set_mctrl_null(struct uart_port *port, unsigned int mctrl) +{ +} + +static void uart00_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned int mcr; + + spin_lock_irqsave(&port->lock, flags); + mcr = UART_GET_MCR(port); + if (break_state == -1) + mcr |= UART_MCR_BR_MSK; + else + mcr &= ~UART_MCR_BR_MSK; + UART_PUT_MCR(port, mcr); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void +uart00_set_termios(struct uart_port *port, struct termios *termios, + struct termios *old) +{ + unsigned int uart_mc, old_ies, baud, quot; + unsigned long flags; + + /* + * We don't support CREAD (yet) + */ + termios->c_cflag |= CREAD; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + /* byte size and parity */ + switch (termios->c_cflag & CSIZE) { + case CS5: + uart_mc = UART_MC_CLS_CHARLEN_5; + break; + case CS6: + uart_mc = UART_MC_CLS_CHARLEN_6; + break; + case CS7: + uart_mc = UART_MC_CLS_CHARLEN_7; + break; + default: // CS8 + uart_mc = UART_MC_CLS_CHARLEN_8; + break; + } + if (termios->c_cflag & CSTOPB) + uart_mc|= UART_MC_ST_TWO; + if (termios->c_cflag & PARENB) { + uart_mc |= UART_MC_PE_MSK; + if (!(termios->c_cflag & PARODD)) + uart_mc |= UART_MC_EP_MSK; + } + + spin_lock_irqsave(&port->lock, flags); + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = UART_RDS_OE_MSK; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART_RDS_FE_MSK | UART_RDS_PE_MSK; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART_RDS_BI_MSK; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_RDS_FE_MSK | UART_RDS_PE_MSK; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART_RDS_BI_MSK; + /* + * If we're ignoring parity and break indicators, + * ignore overruns to (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART_RDS_OE_MSK; + } + + /* first, disable everything */ + old_ies = UART_GET_IES(port); + + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_ies |= UART_IES_ME_MSK; + + /* Set baud rate */ + UART_PUT_DIV_LO(port, (quot & 0xff)); + UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8)); + + UART_PUT_MC(port, uart_mc); + UART_PUT_IES(port, old_ies); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static int uart00_startup(struct uart_port *port) +{ + int result; + + /* + * Allocate the IRQ + */ + result = request_irq(port->irq, uart00_int, 0, "uart00", port); + if (result) { + printk(KERN_ERR "Request of irq %d failed\n", port->irq); + return result; + } + + /* + * Finally, enable interrupts. Use the TII interrupt to minimise + * the number of interrupts generated. If higher performance is + * needed, consider using the TI interrupt with a suitable FIFO + * threshold + */ + UART_PUT_IES(port, UART_IES_RE_MSK | UART_IES_TIE_MSK); + + return 0; +} + +static void uart00_shutdown(struct uart_port *port) +{ + /* + * disable all interrupts, disable the port + */ + UART_PUT_IEC(port, 0xff); + + /* disable break condition and fifos */ + UART_PUT_MCR(port, UART_GET_MCR(port) &~UART_MCR_BR_MSK); + + /* + * Free the interrupt + */ + free_irq(port->irq, port); +} + +static const char *uart00_type(struct uart_port *port) +{ + return port->type == PORT_UART00 ? "Altera UART00" : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void uart00_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, UART_PORT_SIZE); + +#ifdef CONFIG_ARCH_CAMELOT + if (port->membase != (void*)IO_ADDRESS(EXC_UART00_BASE)) { + iounmap(port->membase); + } +#endif +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int uart00_request_port(struct uart_port *port) +{ + return request_mem_region(port->mapbase, UART_PORT_SIZE, "serial_uart00") + != NULL ? 0 : -EBUSY; +} + +/* + * Configure/autoconfigure the port. + */ +static void uart00_config_port(struct uart_port *port, int flags) +{ + + /* + * Map the io memory if this is a soft uart + */ + if (!port->membase) + port->membase = ioremap_nocache(port->mapbase,SZ_4K); + + if (!port->membase) + printk(KERN_ERR "serial00: cannot map io memory\n"); + else + port->type = PORT_UART00; + +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int uart00_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops uart00_pops = { + .tx_empty = uart00_tx_empty, + .set_mctrl = uart00_set_mctrl_null, + .get_mctrl = uart00_get_mctrl, + .stop_tx = uart00_stop_tx, + .start_tx = uart00_start_tx, + .stop_rx = uart00_stop_rx, + .enable_ms = uart00_enable_ms, + .break_ctl = uart00_break_ctl, + .startup = uart00_startup, + .shutdown = uart00_shutdown, + .set_termios = uart00_set_termios, + .type = uart00_type, + .release_port = uart00_release_port, + .request_port = uart00_request_port, + .config_port = uart00_config_port, + .verify_port = uart00_verify_port, +}; + + +#ifdef CONFIG_ARCH_CAMELOT +static struct uart_port epxa10db_port = { + .membase = (void*)IO_ADDRESS(EXC_UART00_BASE), + .mapbase = EXC_UART00_BASE, + .iotype = SERIAL_IO_MEM, + .irq = IRQ_UART, + .uartclk = EXC_AHB2_CLK_FREQUENCY, + .fifosize = 16, + .ops = &uart00_pops, + .flags = ASYNC_BOOT_AUTOCONF, +}; +#endif + + +#ifdef CONFIG_SERIAL_UART00_CONSOLE +static void uart00_console_write(struct console *co, const char *s, unsigned count) +{ +#ifdef CONFIG_ARCH_CAMELOT + struct uart_port *port = &epxa10db_port; + unsigned int status, old_ies; + int i; + + /* + * First save the CR then disable the interrupts + */ + old_ies = UART_GET_IES(port); + UART_PUT_IEC(port,0xff); + + /* + * Now, do each character + */ + for (i = 0; i < count; i++) { + do { + status = UART_GET_TSR(port); + } while (!UART_TX_READY(status)); + UART_PUT_CHAR(port, s[i]); + if (s[i] == '\n') { + do { + status = UART_GET_TSR(port); + } while (!UART_TX_READY(status)); + UART_PUT_CHAR(port, '\r'); + } + } + + /* + * Finally, wait for transmitter to become empty + * and restore the IES + */ + do { + status = UART_GET_TSR(port); + } while (status & UART_TSR_TX_LEVEL_MSK); + UART_PUT_IES(port, old_ies); +#endif +} + +static void __init +uart00_console_get_options(struct uart_port *port, int *baud, + int *parity, int *bits) +{ + unsigned int uart_mc, quot; + + uart_mc = UART_GET_MC(port); + + *parity = 'n'; + if (uart_mc & UART_MC_PE_MSK) { + if (uart_mc & UART_MC_EP_MSK) + *parity = 'e'; + else + *parity = 'o'; + } + + switch (uart_mc & UART_MC_CLS_MSK) { + case UART_MC_CLS_CHARLEN_5: + *bits = 5; + break; + case UART_MC_CLS_CHARLEN_6: + *bits = 6; + break; + case UART_MC_CLS_CHARLEN_7: + *bits = 7; + break; + case UART_MC_CLS_CHARLEN_8: + *bits = 8; + break; + } + quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8); + *baud = port->uartclk / (16 *quot ); +} + +static int __init uart00_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + +#ifdef CONFIG_ARCH_CAMELOT + port = &epxa10db_port; ; +#else + return -ENODEV; +#endif + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + uart00_console_get_options(port, &baud, &parity, &bits); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +extern struct uart_driver uart00_reg; +static struct console uart00_console = { + .name = SERIAL_UART00_NAME, + .write = uart00_console_write, + .device = uart_console_device, + .setup = uart00_console_setup, + .flags = CON_PRINTBUFFER, + .index = 0, + .data = &uart00_reg, +}; + +static int __init uart00_console_init(void) +{ + register_console(&uart00_console); + return 0; +} +console_initcall(uart00_console_init); + +#define UART00_CONSOLE &uart00_console +#else +#define UART00_CONSOLE NULL +#endif + +static struct uart_driver uart00_reg = { + .owner = NULL, + .driver_name = SERIAL_UART00_NAME, + .dev_name = SERIAL_UART00_NAME, + .major = SERIAL_UART00_MAJOR, + .minor = SERIAL_UART00_MINOR, + .nr = UART_NR, + .cons = UART00_CONSOLE, +}; + +struct dev_port_entry{ + unsigned int base_addr; + struct uart_port *port; +}; + +#ifdef CONFIG_PLD_HOTSWAP + +static struct dev_port_entry dev_port_map[UART_NR]; + +/* + * Keep a mapping of dev_info addresses -> port lines to use when + * removing ports dev==NULL indicates unused entry + */ + +struct uart00_ps_data{ + unsigned int clk; + unsigned int fifosize; +}; + +int uart00_add_device(struct pldhs_dev_info* dev_info, void* dev_ps_data) +{ + struct uart00_ps_data* dev_ps=dev_ps_data; + struct uart_port * port; + int i,result; + + i=0; + while(dev_port_map[i].port) + i++; + + if(i==UART_NR){ + printk(KERN_WARNING "uart00: Maximum number of ports reached\n"); + return 0; + } + + port=kmalloc(sizeof(struct uart_port),GFP_KERNEL); + if(!port) + return -ENOMEM; + + printk("clk=%d fifo=%d\n",dev_ps->clk,dev_ps->fifosize); + port->membase=0; + port->mapbase=dev_info->base_addr; + port->iotype=SERIAL_IO_MEM; + port->irq=dev_info->irq; + port->uartclk=dev_ps->clk; + port->fifosize=dev_ps->fifosize; + port->ops=&uart00_pops; + port->line=i; + port->flags=ASYNC_BOOT_AUTOCONF; + + result=uart_add_one_port(&uart00_reg, port); + if(result){ + printk("uart_add_one_port returned %d\n",result); + return result; + } + dev_port_map[i].base_addr=dev_info->base_addr; + dev_port_map[i].port=port; + printk("uart00: added device at %x as ttyUA%d\n",dev_port_map[i].base_addr,i); + return 0; + +} + +int uart00_remove_devices(void) +{ + int i,result; + + + result=0; + for(i=1;i + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader + */ + +/* This driver supports both the original V850E UART interface (called + merely `UART' in the docs) and the newer `UARTB' interface, which is + roughly a superset of the first one. The selection is made at + configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is + presumed, otherwise the old UART -- as these are on-CPU UARTS, a system + can never have both. + + The UARTB interface also has a 16-entry FIFO mode, which is not + yet supported by this driver. */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Initial UART state. This may be overridden by machine-dependent headers. */ +#ifndef V850E_UART_INIT_BAUD +#define V850E_UART_INIT_BAUD 115200 +#endif +#ifndef V850E_UART_INIT_CFLAGS +#define V850E_UART_INIT_CFLAGS (B115200 | CS8 | CREAD) +#endif + +/* A string used for prefixing printed descriptions; since the same UART + macro is actually used on other chips than the V850E. This must be a + constant string. */ +#ifndef V850E_UART_CHIP_NAME +#define V850E_UART_CHIP_NAME "V850E" +#endif + +#define V850E_UART_MINOR_BASE 64 /* First tty minor number */ + + +/* Low-level UART functions. */ + +/* Configure and turn on uart channel CHAN, using the termios `control + modes' bits in CFLAGS, and a baud-rate of BAUD. */ +void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud) +{ + int flags; + v850e_uart_speed_t old_speed; + v850e_uart_config_t old_config; + v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud); + v850e_uart_config_t new_config = v850e_uart_calc_config (cflags); + + /* Disable interrupts while we're twiddling the hardware. */ + local_irq_save (flags); + +#ifdef V850E_UART_PRE_CONFIGURE + V850E_UART_PRE_CONFIGURE (chan, cflags, baud); +#endif + + old_config = V850E_UART_CONFIG (chan); + old_speed = v850e_uart_speed (chan); + + if (! v850e_uart_speed_eq (old_speed, new_speed)) { + /* The baud rate has changed. First, disable the UART. */ + V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI; + old_config = 0; /* Force the uart to be re-initialized. */ + + /* Reprogram the baud-rate generator. */ + v850e_uart_set_speed (chan, new_speed); + } + + if (! (old_config & V850E_UART_CONFIG_ENABLED)) { + /* If we are using the uart for the first time, start by + enabling it, which must be done before turning on any + other bits. */ + V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT; + /* See the initial state. */ + old_config = V850E_UART_CONFIG (chan); + } + + if (new_config != old_config) { + /* Which of the TXE/RXE bits we'll temporarily turn off + before changing other control bits. */ + unsigned temp_disable = 0; + /* Which of the TXE/RXE bits will be enabled. */ + unsigned enable = 0; + unsigned changed_bits = new_config ^ old_config; + + /* Which of RX/TX will be enabled in the new configuration. */ + if (new_config & V850E_UART_CONFIG_RX_BITS) + enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE); + if (new_config & V850E_UART_CONFIG_TX_BITS) + enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE); + + /* Figure out which of RX/TX needs to be disabled; note + that this will only happen if they're not already + disabled. */ + if (changed_bits & V850E_UART_CONFIG_RX_BITS) + temp_disable + |= (old_config & V850E_UART_CONFIG_RX_ENABLE); + if (changed_bits & V850E_UART_CONFIG_TX_BITS) + temp_disable + |= (old_config & V850E_UART_CONFIG_TX_ENABLE); + + /* We have to turn off RX and/or TX mode before changing + any associated control bits. */ + if (temp_disable) + V850E_UART_CONFIG (chan) = old_config & ~temp_disable; + + /* Write the new control bits, while RX/TX are disabled. */ + if (changed_bits & ~enable) + V850E_UART_CONFIG (chan) = new_config & ~enable; + + v850e_uart_config_delay (new_config, new_speed); + + /* Write the final version, with enable bits turned on. */ + V850E_UART_CONFIG (chan) = new_config; + } + + local_irq_restore (flags); +} + + +/* Low-level console. */ + +#ifdef CONFIG_V850E_UART_CONSOLE + +static void v850e_uart_cons_write (struct console *co, + const char *s, unsigned count) +{ + if (count > 0) { + unsigned chan = co->index; + unsigned irq = V850E_UART_TX_IRQ (chan); + int irq_was_enabled, irq_was_pending, flags; + + /* We don't want to get `transmission completed' + interrupts, since we're busy-waiting, so we disable them + while sending (we don't disable interrupts entirely + because sending over a serial line is really slow). We + save the status of the tx interrupt and restore it when + we're done so that using printk doesn't interfere with + normal serial transmission (other than interleaving the + output, of course!). This should work correctly even if + this function is interrupted and the interrupt printks + something. */ + + /* Disable interrupts while fiddling with tx interrupt. */ + local_irq_save (flags); + /* Get current tx interrupt status. */ + irq_was_enabled = v850e_intc_irq_enabled (irq); + irq_was_pending = v850e_intc_irq_pending (irq); + /* Disable tx interrupt if necessary. */ + if (irq_was_enabled) + v850e_intc_disable_irq (irq); + /* Turn interrupts back on. */ + local_irq_restore (flags); + + /* Send characters. */ + while (count > 0) { + int ch = *s++; + + if (ch == '\n') { + /* We don't have the benefit of a tty + driver, so translate NL into CR LF. */ + v850e_uart_wait_for_xmit_ok (chan); + v850e_uart_putc (chan, '\r'); + } + + v850e_uart_wait_for_xmit_ok (chan); + v850e_uart_putc (chan, ch); + + count--; + } + + /* Restore saved tx interrupt status. */ + if (irq_was_enabled) { + /* Wait for the last character we sent to be + completely transmitted (as we'll get an + interrupt interrupt at that point). */ + v850e_uart_wait_for_xmit_done (chan); + /* Clear pending interrupts received due + to our transmission, unless there was already + one pending, in which case we want the + handler to be called. */ + if (! irq_was_pending) + v850e_intc_clear_pending_irq (irq); + /* ... and then turn back on handling. */ + v850e_intc_enable_irq (irq); + } + } +} + +extern struct uart_driver v850e_uart_driver; +static struct console v850e_uart_cons = +{ + .name = "ttyS", + .write = v850e_uart_cons_write, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .cflag = V850E_UART_INIT_CFLAGS, + .index = -1, + .data = &v850e_uart_driver, +}; + +void v850e_uart_cons_init (unsigned chan) +{ + v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS, + V850E_UART_INIT_BAUD); + v850e_uart_cons.index = chan; + register_console (&v850e_uart_cons); + printk ("Console: %s on-chip UART channel %d\n", + V850E_UART_CHIP_NAME, chan); +} + +/* This is what the init code actually calls. */ +static int v850e_uart_console_init (void) +{ + v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL); + return 0; +} +console_initcall(v850e_uart_console_init); + +#define V850E_UART_CONSOLE &v850e_uart_cons + +#else /* !CONFIG_V850E_UART_CONSOLE */ +#define V850E_UART_CONSOLE 0 +#endif /* CONFIG_V850E_UART_CONSOLE */ + +/* TX/RX interrupt handlers. */ + +static void v850e_uart_stop_tx (struct uart_port *port, unsigned tty_stop); + +void v850e_uart_tx (struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + int stopped = uart_tx_stopped (port); + + if (v850e_uart_xmit_ok (port->line)) { + int tx_ch; + + if (port->x_char) { + tx_ch = port->x_char; + port->x_char = 0; + } else if (!uart_circ_empty (xmit) && !stopped) { + tx_ch = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } else + goto no_xmit; + + v850e_uart_putc (port->line, tx_ch); + port->icount.tx++; + + if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS) + uart_write_wakeup (port); + } + + no_xmit: + if (uart_circ_empty (xmit) || stopped) + v850e_uart_stop_tx (port, stopped); +} + +static irqreturn_t v850e_uart_tx_irq(int irq, void *data, struct pt_regs *regs) +{ + struct uart_port *port = data; + v850e_uart_tx (port); + return IRQ_HANDLED; +} + +static irqreturn_t v850e_uart_rx_irq(int irq, void *data, struct pt_regs *regs) +{ + struct uart_port *port = data; + unsigned ch_stat = TTY_NORMAL; + unsigned ch = v850e_uart_getc (port->line); + unsigned err = v850e_uart_err (port->line); + + if (err) { + if (err & V850E_UART_ERR_OVERRUN) { + ch_stat = TTY_OVERRUN; + port->icount.overrun++; + } else if (err & V850E_UART_ERR_FRAME) { + ch_stat = TTY_FRAME; + port->icount.frame++; + } else if (err & V850E_UART_ERR_PARITY) { + ch_stat = TTY_PARITY; + port->icount.parity++; + } + } + + port->icount.rx++; + + tty_insert_flip_char (port->info->tty, ch, ch_stat); + tty_schedule_flip (port->info->tty); + + return IRQ_HANDLED; +} + + +/* Control functions for the serial framework. */ + +static void v850e_uart_nop (struct uart_port *port) { } +static int v850e_uart_success (struct uart_port *port) { return 0; } + +static unsigned v850e_uart_tx_empty (struct uart_port *port) +{ + return TIOCSER_TEMT; /* Can't detect. */ +} + +static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl) +{ +#ifdef V850E_UART_SET_RTS + V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS)); +#endif +} + +static unsigned v850e_uart_get_mctrl (struct uart_port *port) +{ + /* We don't support DCD or DSR, so consider them permanently active. */ + int mctrl = TIOCM_CAR | TIOCM_DSR; + + /* We may support CTS. */ +#ifdef V850E_UART_CTS + mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0; +#else + mctrl |= TIOCM_CTS; +#endif + + return mctrl; +} + +static void v850e_uart_start_tx (struct uart_port *port, unsigned tty_start) +{ + v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line)); + v850e_uart_tx (port); + v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line)); +} + +static void v850e_uart_stop_tx (struct uart_port *port, unsigned tty_stop) +{ + v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line)); +} + +static void v850e_uart_start_rx (struct uart_port *port) +{ + v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line)); +} + +static void v850e_uart_stop_rx (struct uart_port *port) +{ + v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line)); +} + +static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl) +{ + /* Umm, do this later. */ +} + +static int v850e_uart_startup (struct uart_port *port) +{ + int err; + + /* Alloc RX irq. */ + err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq, + SA_INTERRUPT, "v850e_uart", port); + if (err) + return err; + + /* Alloc TX irq. */ + err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq, + SA_INTERRUPT, "v850e_uart", port); + if (err) { + free_irq (V850E_UART_RX_IRQ (port->line), port); + return err; + } + + v850e_uart_start_rx (port); + + return 0; +} + +static void v850e_uart_shutdown (struct uart_port *port) +{ + /* Disable port interrupts. */ + free_irq (V850E_UART_TX_IRQ (port->line), port); + free_irq (V850E_UART_RX_IRQ (port->line), port); + + /* Turn off xmit/recv enable bits. */ + V850E_UART_CONFIG (port->line) + &= ~(V850E_UART_CONFIG_TX_ENABLE + | V850E_UART_CONFIG_RX_ENABLE); + /* Then reset the channel. */ + V850E_UART_CONFIG (port->line) = 0; +} + +static void +v850e_uart_set_termios (struct uart_port *port, struct termios *termios, + struct termios *old) +{ + unsigned cflags = termios->c_cflag; + + /* Restrict flags to legal values. */ + if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8) + /* The new value of CSIZE is invalid, use the old value. */ + cflags = (cflags & ~CSIZE) + | (old ? (old->c_cflag & CSIZE) : CS8); + + termios->c_cflag = cflags; + + v850e_uart_configure (port->line, cflags, + uart_get_baud_rate (port, termios, old, + v850e_uart_min_baud(), + v850e_uart_max_baud())); +} + +static const char *v850e_uart_type (struct uart_port *port) +{ + return port->type == PORT_V850E_UART ? "v850e_uart" : 0; +} + +static void v850e_uart_config_port (struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_V850E_UART; +} + +static int +v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser) +{ + if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART) + return -EINVAL; + if (ser->irq != V850E_UART_TX_IRQ (port->line)) + return -EINVAL; + return 0; +} + +static struct uart_ops v850e_uart_ops = { + .tx_empty = v850e_uart_tx_empty, + .get_mctrl = v850e_uart_get_mctrl, + .set_mctrl = v850e_uart_set_mctrl, + .start_tx = v850e_uart_start_tx, + .stop_tx = v850e_uart_stop_tx, + .stop_rx = v850e_uart_stop_rx, + .enable_ms = v850e_uart_nop, + .break_ctl = v850e_uart_break_ctl, + .startup = v850e_uart_startup, + .shutdown = v850e_uart_shutdown, + .set_termios = v850e_uart_set_termios, + .type = v850e_uart_type, + .release_port = v850e_uart_nop, + .request_port = v850e_uart_success, + .config_port = v850e_uart_config_port, + .verify_port = v850e_uart_verify_port, +}; + +/* Initialization and cleanup. */ + +static struct uart_driver v850e_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "v850e_uart", + .devfs_name = "tts/", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = V850E_UART_MINOR_BASE, + .nr = V850E_UART_NUM_CHANNELS, + .cons = V850E_UART_CONSOLE, +}; + + +static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS]; + +static int __init v850e_uart_init (void) +{ + int rval; + + printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME); + + rval = uart_register_driver (&v850e_uart_driver); + if (rval == 0) { + unsigned chan; + + for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) { + struct uart_port *port = &v850e_uart_ports[chan]; + + memset (port, 0, sizeof *port); + + port->ops = &v850e_uart_ops; + port->line = chan; + port->iotype = SERIAL_IO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + + /* We actually use multiple IRQs, but the serial + framework seems to mainly use this for + informational purposes anyway. Here we use the TX + irq. */ + port->irq = V850E_UART_TX_IRQ (chan); + + /* The serial framework doesn't really use these + membase/mapbase fields for anything useful, but + it requires that they be something non-zero to + consider the port `valid', and also uses them + for informational purposes. */ + port->membase = (void *)V850E_UART_BASE_ADDR (chan); + port->mapbase = V850E_UART_BASE_ADDR (chan); + + /* The framework insists on knowing the uart's master + clock freq, though it doesn't seem to do anything + useful for us with it. We must make it at least + higher than (the maximum baud rate * 16), otherwise + the framework will puke during its internal + calculations, and force the baud rate to be 9600. + To be accurate though, just repeat the calculation + we use when actually setting the speed. */ + port->uartclk = v850e_uart_max_clock() * 16; + + uart_add_one_port (&v850e_uart_driver, port); + } + } + + return rval; +} + +static void __exit v850e_uart_exit (void) +{ + unsigned chan; + + for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) + uart_remove_one_port (&v850e_uart_driver, + &v850e_uart_ports[chan]); + + uart_unregister_driver (&v850e_uart_driver); +} + +module_init (v850e_uart_init); +module_exit (v850e_uart_exit); + +MODULE_AUTHOR ("Miles Bader"); +MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART"); +MODULE_LICENSE ("GPL"); diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c new file mode 100644 index 000000000000..ebc59c27a85c --- /dev/null +++ b/drivers/serial/vr41xx_siu.c @@ -0,0 +1,1100 @@ +/* + * Driver for NEC VR4100 series Serial Interface Unit. + * + * Copyright (C) 2004-2005 Yoichi Yuasa + * + * Based on drivers/serial/8250.c, by Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include + +#if defined(CONFIG_SERIAL_VR41XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define SIU_PORTS_MAX 2 +#define SIU_BAUD_BASE 1152000 +#define SIU_MAJOR 204 +#define SIU_MINOR_BASE 82 + +#define RX_MAX_COUNT 256 +#define TX_MAX_COUNT 15 + +#define SIUIRSEL 0x08 + #define TMICMODE 0x20 + #define TMICTX 0x10 + #define IRMSEL 0x0c + #define IRMSEL_HP 0x08 + #define IRMSEL_TEMIC 0x04 + #define IRMSEL_SHARP 0x00 + #define IRUSESEL 0x02 + #define SIRSEL 0x01 + +struct siu_port { + unsigned int type; + unsigned int irq; + unsigned long start; +}; + +static const struct siu_port siu_type1_ports[] = { + { .type = PORT_VR41XX_SIU, + .irq = SIU_IRQ, + .start = 0x0c000000UL, }, +}; + +#define SIU_TYPE1_NR_PORTS (sizeof(siu_type1_ports) / sizeof(struct siu_port)) + +static const struct siu_port siu_type2_ports[] = { + { .type = PORT_VR41XX_SIU, + .irq = SIU_IRQ, + .start = 0x0f000800UL, }, + { .type = PORT_VR41XX_DSIU, + .irq = DSIU_IRQ, + .start = 0x0f000820UL, }, +}; + +#define SIU_TYPE2_NR_PORTS (sizeof(siu_type2_ports) / sizeof(struct siu_port)) + +static struct uart_port siu_uart_ports[SIU_PORTS_MAX]; +static uint8_t lsr_break_flag[SIU_PORTS_MAX]; + +#define siu_read(port, offset) readb((port)->membase + (offset)) +#define siu_write(port, offset, value) writeb((value), (port)->membase + (offset)) + +void vr41xx_select_siu_interface(siu_interface_t interface) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + if (interface == SIU_INTERFACE_IRDA) + irsel |= SIRSEL; + else + irsel &= ~SIRSEL; + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface); + +void vr41xx_use_irda(irda_use_t use) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + if (use == FIR_USE_IRDA) + irsel |= IRUSESEL; + else + irsel &= ~IRUSESEL; + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +EXPORT_SYMBOL_GPL(vr41xx_use_irda); + +void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed) +{ + struct uart_port *port; + unsigned long flags; + uint8_t irsel; + + port = &siu_uart_ports[0]; + + spin_lock_irqsave(&port->lock, flags); + + irsel = siu_read(port, SIUIRSEL); + irsel &= ~(IRMSEL | TMICTX | TMICMODE); + switch (module) { + case SHARP_IRDA: + irsel |= IRMSEL_SHARP; + break; + case TEMIC_IRDA: + irsel |= IRMSEL_TEMIC | TMICMODE; + if (speed == IRDA_TX_4MBPS) + irsel |= TMICTX; + break; + case HP_IRDA: + irsel |= IRMSEL_HP; + break; + default: + break; + } + siu_write(port, SIUIRSEL, irsel); + + spin_unlock_irqrestore(&port->lock, flags); +} + +EXPORT_SYMBOL_GPL(vr41xx_select_irda_module); + +static inline void siu_clear_fifo(struct uart_port *port) +{ + siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO); + siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + siu_write(port, UART_FCR, 0); +} + +static inline int siu_probe_ports(void) +{ + switch (current_cpu_data.cputype) { + case CPU_VR4111: + case CPU_VR4121: + return SIU_TYPE1_NR_PORTS; + case CPU_VR4122: + case CPU_VR4131: + case CPU_VR4133: + return SIU_TYPE2_NR_PORTS; + } + + return 0; +} + +static inline unsigned long siu_port_size(struct uart_port *port) +{ + switch (port->type) { + case PORT_VR41XX_SIU: + return 11UL; + case PORT_VR41XX_DSIU: + return 8UL; + } + + return 0; +} + +static inline unsigned int siu_check_type(struct uart_port *port) +{ + switch (current_cpu_data.cputype) { + case CPU_VR4111: + case CPU_VR4121: + if (port->line == 0) + return PORT_VR41XX_SIU; + break; + case CPU_VR4122: + case CPU_VR4131: + case CPU_VR4133: + if (port->line == 0) + return PORT_VR41XX_SIU; + else if (port->line == 1) + return PORT_VR41XX_DSIU; + break; + } + + return PORT_UNKNOWN; +} + +static inline const char *siu_type_name(struct uart_port *port) +{ + switch (port->type) { + case PORT_VR41XX_SIU: + return "SIU"; + case PORT_VR41XX_DSIU: + return "DSIU"; + } + + return "unknown"; +} + +static unsigned int siu_tx_empty(struct uart_port *port) +{ + uint8_t lsr; + + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_TEMT) + return TIOCSER_TEMT; + + return 0; +} + +static void siu_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + uint8_t mcr = 0; + + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + siu_write(port, UART_MCR, mcr); +} + +static unsigned int siu_get_mctrl(struct uart_port *port) +{ + uint8_t msr; + unsigned int mctrl = 0; + + msr = siu_read(port, UART_MSR); + if (msr & UART_MSR_DCD) + mctrl |= TIOCM_CAR; + if (msr & UART_MSR_RI) + mctrl |= TIOCM_RNG; + if (msr & UART_MSR_DSR) + mctrl |= TIOCM_DSR; + if (msr & UART_MSR_CTS) + mctrl |= TIOCM_CTS; + + return mctrl; +} + +static void siu_stop_tx(struct uart_port *port, unsigned int tty_stop) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_THRI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_start_tx(struct uart_port *port, unsigned int tty_start) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier |= UART_IER_THRI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_stop_rx(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_RLSI; + siu_write(port, UART_IER, ier); + + port->read_status_mask &= ~UART_LSR_DR; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_enable_ms(struct uart_port *port) +{ + unsigned long flags; + uint8_t ier; + + spin_lock_irqsave(&port->lock, flags); + + ier = siu_read(port, UART_IER); + ier |= UART_IER_MSI; + siu_write(port, UART_IER, ier); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_break_ctl(struct uart_port *port, int ctl) +{ + unsigned long flags; + uint8_t lcr; + + spin_lock_irqsave(&port->lock, flags); + + lcr = siu_read(port, UART_LCR); + if (ctl == -1) + lcr |= UART_LCR_SBC; + else + lcr &= ~UART_LCR_SBC; + siu_write(port, UART_LCR, lcr); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static inline void receive_chars(struct uart_port *port, uint8_t *status, + struct pt_regs *regs) +{ + struct tty_struct *tty; + uint8_t lsr, ch; + char flag; + int max_count = RX_MAX_COUNT; + + tty = port->info->tty; + lsr = *status; + + do { + if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) { + if (tty->low_latency) + tty_flip_buffer_push(tty); + } + + ch = siu_read(port, UART_RX); + port->icount.rx++; + flag = TTY_NORMAL; + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE + lsr |= lsr_break_flag[port->line]; + lsr_break_flag[port->line] = 0; +#endif + if (unlikely(lsr & (UART_LSR_BI | UART_LSR_FE | + UART_LSR_PE | UART_LSR_OE))) { + if (lsr & UART_LSR_BI) { + lsr &= ~(UART_LSR_FE | UART_LSR_PE); + port->icount.brk++; + + if (uart_handle_break(port)) + goto ignore_char; + } + + if (lsr & UART_LSR_FE) + port->icount.frame++; + if (lsr & UART_LSR_PE) + port->icount.parity++; + if (lsr & UART_LSR_OE) + port->icount.overrun++; + + lsr &= port->read_status_mask; + if (lsr & UART_LSR_BI) + flag = TTY_BREAK; + if (lsr & UART_LSR_FE) + flag = TTY_FRAME; + if (lsr & UART_LSR_PE) + flag = TTY_PARITY; + } + + if (uart_handle_sysrq_char(port, ch, regs)) + goto ignore_char; + if ((lsr & port->ignore_status_mask) == 0) + tty_insert_flip_char(tty, ch, flag); + if ((lsr & UART_LSR_OE) && (tty->flip.count < TTY_FLIPBUF_SIZE)) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + + ignore_char: + lsr = siu_read(port, UART_LSR); + } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); + + tty_flip_buffer_push(tty); + + *status = lsr; +} + +static inline void check_modem_status(struct uart_port *port) +{ + uint8_t msr; + + msr = siu_read(port, UART_MSR); + if ((msr & UART_MSR_ANY_DELTA) == 0) + return; + if (msr & UART_MSR_DDCD) + uart_handle_dcd_change(port, msr & UART_MSR_DCD); + if (msr & UART_MSR_TERI) + port->icount.rng++; + if (msr & UART_MSR_DDSR) + port->icount.dsr++; + if (msr & UART_MSR_DCTS) + uart_handle_cts_change(port, msr & UART_MSR_CTS); + + wake_up_interruptible(&port->info->delta_msr_wait); +} + +static inline void transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit; + int max_count = TX_MAX_COUNT; + + xmit = &port->info->xmit; + + if (port->x_char) { + siu_write(port, UART_TX, port->x_char); + port->icount.tx++; + port->x_char = 0; + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + siu_stop_tx(port, 0); + return; + } + + do { + siu_write(port, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (max_count-- > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + siu_stop_tx(port, 0); +} + +static irqreturn_t siu_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct uart_port *port; + uint8_t iir, lsr; + + if (dev_id == NULL) + return IRQ_NONE; + + port = (struct uart_port *)dev_id; + + iir = siu_read(port, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(port, &lsr, regs); + + check_modem_status(port); + + if (lsr & UART_LSR_THRE) + transmit_chars(port); + + return IRQ_HANDLED; +} + +static int siu_startup(struct uart_port *port) +{ + int retval; + + siu_clear_fifo(port); + + (void)siu_read(port, UART_LSR); + (void)siu_read(port, UART_RX); + (void)siu_read(port, UART_IIR); + (void)siu_read(port, UART_MSR); + + if (siu_read(port, UART_LSR) == 0xff) + return -ENODEV; + + retval = request_irq(port->irq, siu_interrupt, 0, siu_type_name(port), port); + if (retval) + return retval; + + if (port->type == PORT_VR41XX_DSIU) + vr41xx_enable_dsiuint(DSIUINT_ALL); + + siu_write(port, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irq(&port->lock); + siu_set_mctrl(port, port->mctrl); + spin_unlock_irq(&port->lock); + + siu_write(port, UART_IER, UART_IER_RLSI | UART_IER_RDI); + + (void)siu_read(port, UART_LSR); + (void)siu_read(port, UART_RX); + (void)siu_read(port, UART_IIR); + (void)siu_read(port, UART_MSR); + + return 0; +} + +static void siu_shutdown(struct uart_port *port) +{ + unsigned long flags; + uint8_t lcr; + + if (port->membase == NULL) + return; + + siu_write(port, UART_IER, 0); + + spin_lock_irqsave(&port->lock, flags); + + port->mctrl &= ~TIOCM_OUT2; + siu_set_mctrl(port, port->mctrl); + + spin_unlock_irqrestore(&port->lock, flags); + + lcr = siu_read(port, UART_LCR); + lcr &= ~UART_LCR_SBC; + siu_write(port, UART_LCR, lcr); + + siu_clear_fifo(port); + + (void)siu_read(port, UART_RX); + + if (port->type == PORT_VR41XX_DSIU) + vr41xx_disable_dsiuint(DSIUINT_ALL); + + free_irq(port->irq, port); +} + +static void siu_set_termios(struct uart_port *port, struct termios *new, + struct termios *old) +{ + tcflag_t c_cflag, c_iflag; + uint8_t lcr, fcr, ier; + unsigned int baud, quot; + unsigned long flags; + + c_cflag = new->c_cflag; + switch (c_cflag & CSIZE) { + case CS5: + lcr = UART_LCR_WLEN5; + break; + case CS6: + lcr = UART_LCR_WLEN6; + break; + case CS7: + lcr = UART_LCR_WLEN7; + break; + default: + lcr = UART_LCR_WLEN8; + break; + } + + if (c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + if (c_cflag & PARENB) + lcr |= UART_LCR_PARITY; + if ((c_cflag & PARODD) != PARODD) + lcr |= UART_LCR_EPAR; + if (c_cflag & CMSPAR) + lcr |= UART_LCR_SPAR; + + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10; + + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, c_cflag, baud); + + c_iflag = new->c_iflag; + + port->read_status_mask = UART_LSR_THRE | UART_LSR_OE | UART_LSR_DR; + if (c_iflag & INPCK) + port->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= UART_LSR_BI; + + port->ignore_status_mask = 0; + if (c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (c_iflag & IGNBRK) { + port->ignore_status_mask |= UART_LSR_BI; + if (c_iflag & IGNPAR) + port->ignore_status_mask |= UART_LSR_OE; + } + + if ((c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_LSR_DR; + + ier = siu_read(port, UART_IER); + ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(port, c_cflag)) + ier |= UART_IER_MSI; + siu_write(port, UART_IER, ier); + + siu_write(port, UART_LCR, lcr | UART_LCR_DLAB); + + siu_write(port, UART_DLL, (uint8_t)quot); + siu_write(port, UART_DLM, (uint8_t)(quot >> 8)); + + siu_write(port, UART_LCR, lcr); + + siu_write(port, UART_FCR, fcr); + + siu_set_mctrl(port, port->mctrl); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void siu_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) +{ + switch (state) { + case 0: + switch (port->type) { + case PORT_VR41XX_SIU: + vr41xx_supply_clock(SIU_CLOCK); + break; + case PORT_VR41XX_DSIU: + vr41xx_supply_clock(DSIU_CLOCK); + break; + } + break; + case 3: + switch (port->type) { + case PORT_VR41XX_SIU: + vr41xx_mask_clock(SIU_CLOCK); + break; + case PORT_VR41XX_DSIU: + vr41xx_mask_clock(DSIU_CLOCK); + break; + } + break; + } +} + +static const char *siu_type(struct uart_port *port) +{ + return siu_type_name(port); +} + +static void siu_release_port(struct uart_port *port) +{ + unsigned long size; + + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } + + size = siu_port_size(port); + release_mem_region(port->mapbase, size); +} + +static int siu_request_port(struct uart_port *port) +{ + unsigned long size; + struct resource *res; + + size = siu_port_size(port); + res = request_mem_region(port->mapbase, size, siu_type_name(port)); + if (res == NULL) + return -EBUSY; + + if (port->flags & UPF_IOREMAP) { + port->membase = ioremap(port->mapbase, size); + if (port->membase == NULL) { + release_resource(res); + return -ENOMEM; + } + } + + return 0; +} + +static void siu_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = siu_check_type(port); + (void)siu_request_port(port); + } +} + +static int siu_verify_port(struct uart_port *port, struct serial_struct *serial) +{ + if (port->type != PORT_VR41XX_SIU && port->type != PORT_VR41XX_DSIU) + return -EINVAL; + if (port->irq != serial->irq) + return -EINVAL; + if (port->iotype != serial->io_type) + return -EINVAL; + if (port->mapbase != (unsigned long)serial->iomem_base) + return -EINVAL; + + return 0; +} + +static struct uart_ops siu_uart_ops = { + .tx_empty = siu_tx_empty, + .set_mctrl = siu_set_mctrl, + .get_mctrl = siu_get_mctrl, + .stop_tx = siu_stop_tx, + .start_tx = siu_start_tx, + .stop_rx = siu_stop_rx, + .enable_ms = siu_enable_ms, + .break_ctl = siu_break_ctl, + .startup = siu_startup, + .shutdown = siu_shutdown, + .set_termios = siu_set_termios, + .pm = siu_pm, + .type = siu_type, + .release_port = siu_release_port, + .request_port = siu_request_port, + .config_port = siu_config_port, + .verify_port = siu_verify_port, +}; + +static int siu_init_ports(void) +{ + const struct siu_port *siu; + struct uart_port *port; + int i, num; + + switch (current_cpu_data.cputype) { + case CPU_VR4111: + case CPU_VR4121: + siu = siu_type1_ports; + break; + case CPU_VR4122: + case CPU_VR4131: + case CPU_VR4133: + siu = siu_type2_ports; + break; + default: + return 0; + } + + port = siu_uart_ports; + num = siu_probe_ports(); + for (i = 0; i < num; i++) { + spin_lock_init(&port->lock); + port->irq = siu->irq; + port->uartclk = SIU_BAUD_BASE * 16; + port->fifosize = 16; + port->regshift = 0; + port->iotype = UPIO_MEM; + port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + port->type = siu->type; + port->line = i; + port->mapbase = siu->start; + siu++; + port++; + } + + return num; +} + +#ifdef CONFIG_SERIAL_VR41XX_CONSOLE + +static void early_set_termios(struct uart_port *port, struct termios *new, + struct termios *old) +{ + tcflag_t c_cflag; + uint8_t lcr; + unsigned int baud, quot; + + c_cflag = new->c_cflag; + switch (c_cflag & CSIZE) { + case CS5: + lcr = UART_LCR_WLEN5; + break; + case CS6: + lcr = UART_LCR_WLEN6; + break; + case CS7: + lcr = UART_LCR_WLEN7; + break; + default: + lcr = UART_LCR_WLEN8; + break; + } + + if (c_cflag & CSTOPB) + lcr |= UART_LCR_STOP; + if (c_cflag & PARENB) + lcr |= UART_LCR_PARITY; + if ((c_cflag & PARODD) != PARODD) + lcr |= UART_LCR_EPAR; + if (c_cflag & CMSPAR) + lcr |= UART_LCR_SPAR; + + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + siu_write(port, UART_LCR, lcr | UART_LCR_DLAB); + + siu_write(port, UART_DLL, (uint8_t)quot); + siu_write(port, UART_DLM, (uint8_t)(quot >> 8)); + + siu_write(port, UART_LCR, lcr); +} + +static struct uart_ops early_uart_ops = { + .set_termios = early_set_termios, +}; + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static void wait_for_xmitr(struct uart_port *port) +{ + int timeout = 10000; + uint8_t lsr, msr; + + do { + lsr = siu_read(port, UART_LSR); + if (lsr & UART_LSR_BI) + lsr_break_flag[port->line] = UART_LSR_BI; + + if ((lsr & BOTH_EMPTY) == BOTH_EMPTY) + break; + } while (timeout-- > 0); + + if (port->flags & UPF_CONS_FLOW) { + timeout = 1000000; + + do { + msr = siu_read(port, UART_MSR); + if ((msr & UART_MSR_CTS) != 0) + break; + } while (timeout-- > 0); + } +} + +static void siu_console_write(struct console *con, const char *s, unsigned count) +{ + struct uart_port *port; + uint8_t ier; + unsigned i; + + port = &siu_uart_ports[con->index]; + + ier = siu_read(port, UART_IER); + siu_write(port, UART_IER, 0); + + for (i = 0; i < count && *s != '\0'; i++, s++) { + wait_for_xmitr(port); + siu_write(port, UART_TX, *s); + if (*s == '\n') { + wait_for_xmitr(port); + siu_write(port, UART_TX, '\r'); + } + } + + wait_for_xmitr(port); + siu_write(port, UART_IER, ier); +} + +static int siu_console_setup(struct console *con, char *options) +{ + struct uart_port *port; + int baud = 9600; + int parity = 'n'; + int bits = 8; + int flow = 'n'; + + if (con->index >= SIU_PORTS_MAX) + con->index = 0; + + port = &siu_uart_ports[con->index]; + if (port->membase == NULL) { + if (port->mapbase == 0) + return -ENODEV; + port->membase = (unsigned char __iomem *)KSEG1ADDR(port->mapbase); + } + + vr41xx_select_siu_interface(SIU_INTERFACE_RS232C); + + if (options != NULL) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, con, baud, parity, bits, flow); +} + +static struct uart_driver siu_uart_driver; + +static struct console siu_console = { + .name = "ttyVR", + .write = siu_console_write, + .device = uart_console_device, + .setup = siu_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &siu_uart_driver, +}; + +static int __devinit siu_console_init(void) +{ + struct uart_port *port; + int num, i; + + num = siu_init_ports(); + if (num <= 0) + return -ENODEV; + + for (i = 0; i < num; i++) { + port = &siu_uart_ports[i]; + port->ops = &early_uart_ops; + } + + register_console(&siu_console); + + return 0; +} + +console_initcall(siu_console_init); + +#define SERIAL_VR41XX_CONSOLE &siu_console +#else +#define SERIAL_VR41XX_CONSOLE NULL +#endif + +static struct uart_driver siu_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "SIU", + .dev_name = "ttyVR", + .devfs_name = "ttvr/", + .major = SIU_MAJOR, + .minor = SIU_MINOR_BASE, + .cons = SERIAL_VR41XX_CONSOLE, +}; + +static int siu_probe(struct device *dev) +{ + struct uart_port *port; + int num, i, retval; + + num = siu_init_ports(); + if (num <= 0) + return -ENODEV; + + siu_uart_driver.nr = num; + retval = uart_register_driver(&siu_uart_driver); + if (retval) + return retval; + + for (i = 0; i < num; i++) { + port = &siu_uart_ports[i]; + port->ops = &siu_uart_ops; + port->dev = dev; + + retval = uart_add_one_port(&siu_uart_driver, port); + if (retval) + break; + } + + if (i == 0 && retval < 0) { + uart_unregister_driver(&siu_uart_driver); + return retval; + } + + return 0; +} + +static int siu_remove(struct device *dev) +{ + struct uart_port *port; + int i; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if (port->dev == dev) { + uart_remove_one_port(&siu_uart_driver, port); + port->dev = NULL; + } + } + + uart_unregister_driver(&siu_uart_driver); + + return 0; +} + +static int siu_suspend(struct device *dev, u32 state, u32 level) +{ + struct uart_port *port; + int i; + + if (level != SUSPEND_DISABLE) + return 0; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if ((port->type == PORT_VR41XX_SIU || + port->type == PORT_VR41XX_DSIU) && port->dev == dev) + uart_suspend_port(&siu_uart_driver, port); + + } + + return 0; +} + +static int siu_resume(struct device *dev, u32 level) +{ + struct uart_port *port; + int i; + + if (level != RESUME_ENABLE) + return 0; + + for (i = 0; i < siu_uart_driver.nr; i++) { + port = &siu_uart_ports[i]; + if ((port->type == PORT_VR41XX_SIU || + port->type == PORT_VR41XX_DSIU) && port->dev == dev) + uart_resume_port(&siu_uart_driver, port); + } + + return 0; +} + +static struct platform_device *siu_platform_device; + +static struct device_driver siu_device_driver = { + .name = "SIU", + .bus = &platform_bus_type, + .probe = siu_probe, + .remove = siu_remove, + .suspend = siu_suspend, + .resume = siu_resume, +}; + +static int __devinit vr41xx_siu_init(void) +{ + int retval; + + siu_platform_device = platform_device_register_simple("SIU", -1, NULL, 0); + if (IS_ERR(siu_platform_device)) + return PTR_ERR(siu_platform_device); + + retval = driver_register(&siu_device_driver); + if (retval < 0) + platform_device_unregister(siu_platform_device); + + return retval; +} + +static void __devexit vr41xx_siu_exit(void) +{ + driver_unregister(&siu_device_driver); + + platform_device_unregister(siu_platform_device); +} + +module_init(vr41xx_siu_init); +module_exit(vr41xx_siu_exit); -- cgit