From 44a5f423e70374e5b42cecd85e78f2d79334e0f2 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Wed, 17 Jan 2018 17:15:25 +0100 Subject: spi: a3700: Clear DATA_OUT when performing a read When performing a read using FIFO mode, the spi controller shifts out the last 2 bytes that were written in a previous transfer on MOSI. This undocumented behaviour can cause devices to misinterpret the transfer, so we explicitly clear the WFIFO before each read. This behaviour was noticed on EspressoBin. Signed-off-by: Maxime Chevallier Signed-off-by: Mark Brown --- drivers/spi/spi-armada-3700.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/spi/spi-armada-3700.c') diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index 77fe55ce790c..4857b0119556 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -607,6 +607,11 @@ static int a3700_spi_transfer_one(struct spi_master *master, a3700_spi_header_set(a3700_spi); if (xfer->rx_buf) { + /* Clear WFIFO, since it's last 2 bytes are shifted out during + * a read operation + */ + spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, 0); + /* Set read data length */ spireg_write(a3700_spi, A3700_SPI_IF_DIN_CNT_REG, a3700_spi->buf_len); -- cgit From abf3a49e50967bd67cff67f289690f76436f461f Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Wed, 17 Jan 2018 17:15:26 +0100 Subject: spi: a3700: Set frequency limits at startup Armada 3700 SPI controller has an internal clock divider which can divide the parent clock frequency by up to 30. This patch sets the limits in the spi_controller fields so that we can detect when a non-supported frequency is requested by a device for a transfer. Signed-off-by: Maxime Chevallier Signed-off-by: Mark Brown --- drivers/spi/spi-armada-3700.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/spi/spi-armada-3700.c') diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index 4857b0119556..07f227e3c834 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -27,6 +27,8 @@ #define DRIVER_NAME "armada_3700_spi" +#define A3700_SPI_MAX_SPEED_HZ 100000000 +#define A3700_SPI_MAX_PRESCALE 30 #define A3700_SPI_TIMEOUT 10 /* SPI Register Offest */ @@ -815,6 +817,11 @@ static int a3700_spi_probe(struct platform_device *pdev) goto error; } + master->max_speed_hz = min_t(unsigned long, A3700_SPI_MAX_SPEED_HZ, + clk_get_rate(spi->clk)); + master->min_speed_hz = DIV_ROUND_UP(clk_get_rate(spi->clk), + A3700_SPI_MAX_PRESCALE); + ret = a3700_spi_init(spi); if (ret) goto error_clk; -- cgit From a456c9320d997fdb26bfab496dd9e37f155cc788 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Wed, 17 Jan 2018 17:15:27 +0100 Subject: spi: a3700: Allow to enable or disable FIFO mode The armada 3700 SPI controller allows to make transfers without using the 32 bytes RFIFO and WFIFO. This commit enable switching between FIFO and non-FIFO mode, which is necessary to implement full-duplex transfers. Signed-off-by: Maxime Chevallier Signed-off-by: Mark Brown --- drivers/spi/spi-armada-3700.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers/spi/spi-armada-3700.c') diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index 07f227e3c834..97938c6d6267 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -185,12 +185,15 @@ static int a3700_spi_pin_mode_set(struct a3700_spi *a3700_spi, return 0; } -static void a3700_spi_fifo_mode_set(struct a3700_spi *a3700_spi) +static void a3700_spi_fifo_mode_set(struct a3700_spi *a3700_spi, bool enable) { u32 val; val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG); - val |= A3700_SPI_FIFO_MODE; + if (enable) + val |= A3700_SPI_FIFO_MODE; + else + val &= ~A3700_SPI_FIFO_MODE; spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val); } @@ -291,7 +294,7 @@ static int a3700_spi_init(struct a3700_spi *a3700_spi) a3700_spi_deactivate_cs(a3700_spi, i); /* Enable FIFO mode */ - a3700_spi_fifo_mode_set(a3700_spi); + a3700_spi_fifo_mode_set(a3700_spi, true); /* Set SPI mode */ a3700_spi_mode_set(a3700_spi, master->mode_bits); -- cgit From f68a7dcb91b7957c5bb1c3e347775332af719519 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Wed, 17 Jan 2018 17:15:28 +0100 Subject: spi: a3700: Add full-duplex support The armada 3700 SPI controller has support for full-duplex transfers, but it can only be done without using the hardware FIFOs. A full duplex transfer is done by shifting 4 bytes at a time, or even one byte at a time for transfers less than 4 bytes long. While this method is perfectly suitable for small transfers, it is still slower than using the FIFOs. This commit implement full-duplex support, making sure that half-duplex transfers are still done using the FIFOs with the existing method. Some setup functions were moved around to make sure the controller is properly configured before beginning each transfer. This was tested on EspressoBin with a logical analyser, and a simple setup where MISO is connected on MOSI. Transfers were made from userspace using spidev and spi-pipe from the spi-tools project Signed-off-by: Maxime Chevallier Signed-off-by: Mark Brown --- drivers/spi/spi-armada-3700.c | 85 +++++++++++++++++++++++++++++++++++++------ 1 file changed, 73 insertions(+), 12 deletions(-) (limited to 'drivers/spi/spi-armada-3700.c') diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index 97938c6d6267..fdc35dabcda2 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -413,15 +413,20 @@ static void a3700_spi_transfer_setup(struct spi_device *spi, struct spi_transfer *xfer) { struct a3700_spi *a3700_spi; - unsigned int byte_len; a3700_spi = spi_master_get_devdata(spi->master); a3700_spi_clock_set(a3700_spi, xfer->speed_hz); - byte_len = xfer->bits_per_word >> 3; + /* Use 4 bytes long transfers. Each transfer method has its way to deal + * with the remaining bytes for non 4-bytes aligned transfers. + */ + a3700_spi_bytelen_set(a3700_spi, 4); - a3700_spi_fifo_thres_set(a3700_spi, byte_len); + /* Initialize the working buffers */ + a3700_spi->tx_buf = xfer->tx_buf; + a3700_spi->rx_buf = xfer->rx_buf; + a3700_spi->buf_len = xfer->len; } static void a3700_spi_set_cs(struct spi_device *spi, bool enable) @@ -576,27 +581,26 @@ static int a3700_spi_prepare_message(struct spi_master *master, if (ret) return ret; - a3700_spi_bytelen_set(a3700_spi, 4); - a3700_spi_mode_set(a3700_spi, spi->mode); return 0; } -static int a3700_spi_transfer_one(struct spi_master *master, +static int a3700_spi_transfer_one_fifo(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) { struct a3700_spi *a3700_spi = spi_master_get_devdata(master); int ret = 0, timeout = A3700_SPI_TIMEOUT; - unsigned int nbits = 0; + unsigned int nbits = 0, byte_len; u32 val; - a3700_spi_transfer_setup(spi, xfer); + /* Make sure we use FIFO mode */ + a3700_spi_fifo_mode_set(a3700_spi, true); - a3700_spi->tx_buf = xfer->tx_buf; - a3700_spi->rx_buf = xfer->rx_buf; - a3700_spi->buf_len = xfer->len; + /* Configure FIFO thresholds */ + byte_len = xfer->bits_per_word >> 3; + a3700_spi_fifo_thres_set(a3700_spi, byte_len); if (xfer->tx_buf) nbits = xfer->tx_nbits; @@ -731,6 +735,64 @@ out: return ret; } +static int a3700_spi_transfer_one_full_duplex(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + struct a3700_spi *a3700_spi = spi_master_get_devdata(master); + u32 val_in, val_out; + + /* Disable FIFO mode */ + a3700_spi_fifo_mode_set(a3700_spi, false); + + while (a3700_spi->buf_len) { + + /* When we have less than 4 bytes to transfer, switch to 1 byte + * mode. This is reset after each transfer + */ + if (a3700_spi->buf_len < 4) + a3700_spi_bytelen_set(a3700_spi, 1); + + if (a3700_spi->byte_len == 1) + val_out = *a3700_spi->tx_buf; + else + val_out = cpu_to_le32(*(u32 *)a3700_spi->tx_buf); + + spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val_out); + + /* Wait for all the data to be shifted in / out */ + while (!(spireg_read(a3700_spi, A3700_SPI_IF_CTRL_REG) & + A3700_SPI_XFER_DONE)) + cpu_relax(); + + val_in = le32_to_cpu(spireg_read(a3700_spi, + A3700_SPI_DATA_IN_REG)); + + memcpy(a3700_spi->rx_buf, &val_in, a3700_spi->byte_len); + + a3700_spi->buf_len -= a3700_spi->byte_len; + a3700_spi->tx_buf += a3700_spi->byte_len; + a3700_spi->rx_buf += a3700_spi->byte_len; + + } + + spi_finalize_current_transfer(master); + + return 0; +} + +static int a3700_spi_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *xfer) +{ + a3700_spi_transfer_setup(spi, xfer); + + if (xfer->tx_buf && xfer->rx_buf) + return a3700_spi_transfer_one_full_duplex(master, spi, xfer); + + return a3700_spi_transfer_one_fifo(master, spi, xfer); +} + static int a3700_spi_unprepare_message(struct spi_master *master, struct spi_message *message) { @@ -780,7 +842,6 @@ static int a3700_spi_probe(struct platform_device *pdev) master->transfer_one = a3700_spi_transfer_one; master->unprepare_message = a3700_spi_unprepare_message; master->set_cs = a3700_spi_set_cs; - master->flags = SPI_MASTER_HALF_DUPLEX; master->mode_bits |= (SPI_RX_DUAL | SPI_TX_DUAL | SPI_RX_QUAD | SPI_TX_QUAD); -- cgit From 162f8debc01f48ac984ed6d7291743053ec90271 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Wed, 24 Jan 2018 15:10:47 +0100 Subject: spi: a3700: Remove endianness swapping functions when accessing FIFOs Fixes the following sparse warnings : line 504: warning: incorrect type in assignment (different base types) line 504: expected unsigned int [unsigned] [usertype] val line 504: got restricted __le32 [usertype] line 527: warning: cast to restricted __le32 This is solved by removing endian-converson functions, since the converted values are going through readl/writel anyway, which take care of the conversion. Fixes: 6fd6fd68c9e2 ("spi: armada-3700: Fix padding when sending not 4-byte aligned data") Signed-off-by: Maxime Chevallier Reviewed-by: Gregory CLEMENT Signed-off-by: Mark Brown --- drivers/spi/spi-armada-3700.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/spi/spi-armada-3700.c') diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index fdc35dabcda2..f32b83c7209f 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -493,7 +493,7 @@ static int a3700_spi_fifo_write(struct a3700_spi *a3700_spi) u32 val; while (!a3700_is_wfifo_full(a3700_spi) && a3700_spi->buf_len) { - val = cpu_to_le32(*(u32 *)a3700_spi->tx_buf); + val = *(u32 *)a3700_spi->tx_buf; spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val); a3700_spi->buf_len -= 4; a3700_spi->tx_buf += 4; @@ -516,9 +516,8 @@ static int a3700_spi_fifo_read(struct a3700_spi *a3700_spi) while (!a3700_is_rfifo_empty(a3700_spi) && a3700_spi->buf_len) { val = spireg_read(a3700_spi, A3700_SPI_DATA_IN_REG); if (a3700_spi->buf_len >= 4) { - u32 data = le32_to_cpu(val); - memcpy(a3700_spi->rx_buf, &data, 4); + memcpy(a3700_spi->rx_buf, &val, 4); a3700_spi->buf_len -= 4; a3700_spi->rx_buf += 4; -- cgit From 34b1fcaeb21de2a64004a95a1dc52d7e9998b733 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Wed, 24 Jan 2018 15:10:48 +0100 Subject: spi: a3700: Remove endianness swapping for full-duplex transfers Fixes the following sparse warnings : line 767: warning: incorrect type in assignment (different base types) line 767: expected unsigned int [unsigned] [assigned] [usertype] val_out line 767: got restricted __le32 [usertype] line 776: warning: cast to restricted __le32 This takes advantage of readl/writel to do the endianness reordering, and removes an extra variable in the function. Fixes: f68a7dcb91b7 ("spi: a3700: Add full-duplex support") Signed-off-by: Maxime Chevallier Reviewed-by: Gregory CLEMENT Signed-off-by: Mark Brown --- drivers/spi/spi-armada-3700.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers/spi/spi-armada-3700.c') diff --git a/drivers/spi/spi-armada-3700.c b/drivers/spi/spi-armada-3700.c index f32b83c7209f..1f42bd04e630 100644 --- a/drivers/spi/spi-armada-3700.c +++ b/drivers/spi/spi-armada-3700.c @@ -739,7 +739,7 @@ static int a3700_spi_transfer_one_full_duplex(struct spi_master *master, struct spi_transfer *xfer) { struct a3700_spi *a3700_spi = spi_master_get_devdata(master); - u32 val_in, val_out; + u32 val; /* Disable FIFO mode */ a3700_spi_fifo_mode_set(a3700_spi, false); @@ -753,21 +753,20 @@ static int a3700_spi_transfer_one_full_duplex(struct spi_master *master, a3700_spi_bytelen_set(a3700_spi, 1); if (a3700_spi->byte_len == 1) - val_out = *a3700_spi->tx_buf; + val = *a3700_spi->tx_buf; else - val_out = cpu_to_le32(*(u32 *)a3700_spi->tx_buf); + val = *(u32 *)a3700_spi->tx_buf; - spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val_out); + spireg_write(a3700_spi, A3700_SPI_DATA_OUT_REG, val); /* Wait for all the data to be shifted in / out */ while (!(spireg_read(a3700_spi, A3700_SPI_IF_CTRL_REG) & A3700_SPI_XFER_DONE)) cpu_relax(); - val_in = le32_to_cpu(spireg_read(a3700_spi, - A3700_SPI_DATA_IN_REG)); + val = spireg_read(a3700_spi, A3700_SPI_DATA_IN_REG); - memcpy(a3700_spi->rx_buf, &val_in, a3700_spi->byte_len); + memcpy(a3700_spi->rx_buf, &val, a3700_spi->byte_len); a3700_spi->buf_len -= a3700_spi->byte_len; a3700_spi->tx_buf += a3700_spi->byte_len; -- cgit