From ea70fb5b3e8b795730ab5716592bb573648434bb Mon Sep 17 00:00:00 2001 From: Oleksandr Suvorov Date: Sat, 29 Feb 2020 18:18:40 +0200 Subject: spi: spidev: fix a debug message value The debug message in spidev_message() can show wrong xfer speed. It happens if the initial (came from DT) and set with ioctl call spidev speeds are different (spidev->speed_hz != spi->max_speed_hz) and one sends a message with ioctl call and the field of speed is uninitialized (u_tmp->speed_hz == 0). In this case the kernel shows the spi->max_speed_hz value instead of correct spidev->speed_hz. ... set the max speed with an ioctl call: [ 1227.702714] spidev spi0.0: setup mode 0, 32 bits/w, 20000000 Hz max --> 0 (real speed sets to 20000000Hz) send a message with an ioctl call: [ 1227.731801] spidev spi0.0: xfer len 4096 tx 32bits 0 usec 10000000Hz (debug message shows 10000000Hz that is the original max speed of this spidev came from DT) ... Fix the data source for the debug message. Signed-off-by: Oleksandr Suvorov Link: https://lore.kernel.org/r/20200229161841.89144-2-oleksandr.suvorov@toradex.com Signed-off-by: Mark Brown --- drivers/spi/spidev.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/spi/spidev.c') diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 2ab6e782f14c..c97e853dbf5c 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -275,14 +275,14 @@ static int spidev_message(struct spidev_data *spidev, #ifdef VERBOSE dev_dbg(&spidev->spi->dev, " xfer len %u %s%s%s%dbits %u usec %u usec %uHz\n", - u_tmp->len, - u_tmp->rx_buf ? "rx " : "", - u_tmp->tx_buf ? "tx " : "", - u_tmp->cs_change ? "cs " : "", - u_tmp->bits_per_word ? : spidev->spi->bits_per_word, - u_tmp->delay_usecs, - u_tmp->word_delay_usecs, - u_tmp->speed_hz ? : spidev->spi->max_speed_hz); + k_tmp->len, + k_tmp->rx_buf ? "rx " : "", + k_tmp->tx_buf ? "tx " : "", + k_tmp->cs_change ? "cs " : "", + k_tmp->bits_per_word ? : spidev->spi->bits_per_word, + k_tmp->delay.value, + k_tmp->word_delay.value, + k_tmp->speed_hz ? : spidev->spi->max_speed_hz); #endif spi_message_add_tail(k_tmp, &msg); } -- cgit