From 63f2b1677fba11c5bd02089f25c13421948905f5 Mon Sep 17 00:00:00 2001
From: Noralf Trønnes <noralf@tronnes.org>
Date: Tue, 17 Sep 2019 19:18:41 +0200
Subject: staging/fbtft: Depend on OF
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor
interface") removed setting gpios via platform data. This means that
fbtft will now only work with Device Tree so set the dependency.

This also prevents a NULL pointer deref on non-DT platform because
fbtftops.request_gpios is not set in that case anymore.

Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20190917171843.10334-1-noralf@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/fbtft/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/staging/fbtft')

diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig
index 8ec524a95ec8..4e5d860fd788 100644
--- a/drivers/staging/fbtft/Kconfig
+++ b/drivers/staging/fbtft/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 menuconfig FB_TFT
 	tristate "Support for small TFT LCD display modules"
-	depends on FB && SPI
+	depends on FB && SPI && OF
 	depends on GPIOLIB || COMPILE_TEST
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
-- 
cgit 


From 2962db71c7030868b6859d09b2138b55297df95e Mon Sep 17 00:00:00 2001
From: Noralf Trønnes <noralf@tronnes.org>
Date: Tue, 17 Sep 2019 19:18:42 +0200
Subject: staging/fbtft: Remove fbtft_device
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Commit c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor
interface") removed the gpio code from fbtft_device rendering it useless.

fbtft_device is a module that was used on the Raspberry Pi to dynamically
add fbtft devices when the Pi didn't have Device Tree support.
Just remove the module since it's the responsibility of Device Tree, ACPI
or platform code to add devices.

Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface")
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20190917171843.10334-2-noralf@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/fbtft/Kconfig        |    4 -
 drivers/staging/fbtft/Makefile       |    3 -
 drivers/staging/fbtft/fbtft_device.c | 1261 ----------------------------------
 3 files changed, 1268 deletions(-)
 delete mode 100644 drivers/staging/fbtft/fbtft_device.c

(limited to 'drivers/staging/fbtft')

diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig
index 4e5d860fd788..4c37d087e25c 100644
--- a/drivers/staging/fbtft/Kconfig
+++ b/drivers/staging/fbtft/Kconfig
@@ -205,7 +205,3 @@ config FB_FLEX
 	depends on FB_TFT
 	help
 	  Generic Framebuffer support for TFT LCD displays.
-
-config FB_TFT_FBTFT_DEVICE
-	tristate "Module to for adding FBTFT devices"
-	depends on FB_TFT
diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile
index 6bc03311c9c7..925ec17e318d 100644
--- a/drivers/staging/fbtft/Makefile
+++ b/drivers/staging/fbtft/Makefile
@@ -37,6 +37,3 @@ obj-$(CONFIG_FB_TFT_UC1701)      += fb_uc1701.o
 obj-$(CONFIG_FB_TFT_UPD161704)   += fb_upd161704.o
 obj-$(CONFIG_FB_TFT_WATTEROTT)   += fb_watterott.o
 obj-$(CONFIG_FB_FLEX)            += flexfb.o
-
-# Device modules
-obj-$(CONFIG_FB_TFT_FBTFT_DEVICE) += fbtft_device.o
diff --git a/drivers/staging/fbtft/fbtft_device.c b/drivers/staging/fbtft/fbtft_device.c
deleted file mode 100644
index 44e1410eb3fe..000000000000
--- a/drivers/staging/fbtft/fbtft_device.c
+++ /dev/null
@@ -1,1261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *
- * Copyright (C) 2013, Noralf Tronnes
- */
-
-#define pr_fmt(fmt) "fbtft_device: " fmt
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/gpio/consumer.h>
-#include <linux/spi/spi.h>
-#include <video/mipi_display.h>
-
-#include "fbtft.h"
-
-#define MAX_GPIOS 32
-
-static struct spi_device *spi_device;
-static struct platform_device *p_device;
-
-static char *name;
-module_param(name, charp, 0000);
-MODULE_PARM_DESC(name,
-		 "Devicename (required). name=list => list all supported devices.");
-
-static unsigned int rotate;
-module_param(rotate, uint, 0000);
-MODULE_PARM_DESC(rotate,
-		 "Angle to rotate display counter clockwise: 0, 90, 180, 270");
-
-static unsigned int busnum;
-module_param(busnum, uint, 0000);
-MODULE_PARM_DESC(busnum, "SPI bus number (default=0)");
-
-static unsigned int cs;
-module_param(cs, uint, 0000);
-MODULE_PARM_DESC(cs, "SPI chip select (default=0)");
-
-static unsigned int speed;
-module_param(speed, uint, 0000);
-MODULE_PARM_DESC(speed, "SPI speed (override device default)");
-
-static int mode = -1;
-module_param(mode, int, 0000);
-MODULE_PARM_DESC(mode, "SPI mode (override device default)");
-
-static unsigned int fps;
-module_param(fps, uint, 0000);
-MODULE_PARM_DESC(fps, "Frames per second (override driver default)");
-
-static char *gamma;
-module_param(gamma, charp, 0000);
-MODULE_PARM_DESC(gamma,
-		 "String representation of Gamma Curve(s). Driver specific.");
-
-static int txbuflen;
-module_param(txbuflen, int, 0000);
-MODULE_PARM_DESC(txbuflen, "txbuflen (override driver default)");
-
-static int bgr = -1;
-module_param(bgr, int, 0000);
-MODULE_PARM_DESC(bgr,
-		 "BGR bit (supported by some drivers).");
-
-static unsigned int startbyte;
-module_param(startbyte, uint, 0000);
-MODULE_PARM_DESC(startbyte, "Sets the Start byte used by some SPI displays.");
-
-static bool custom;
-module_param(custom, bool, 0000);
-MODULE_PARM_DESC(custom, "Add a custom display device. Use speed= argument to make it a SPI device, else platform_device");
-
-static unsigned int width;
-module_param(width, uint, 0000);
-MODULE_PARM_DESC(width, "Display width, used with the custom argument");
-
-static unsigned int height;
-module_param(height, uint, 0000);
-MODULE_PARM_DESC(height, "Display height, used with the custom argument");
-
-static unsigned int buswidth = 8;
-module_param(buswidth, uint, 0000);
-MODULE_PARM_DESC(buswidth, "Display bus width, used with the custom argument");
-
-static s16 init[FBTFT_MAX_INIT_SEQUENCE];
-static int init_num;
-module_param_array(init, short, &init_num, 0000);
-MODULE_PARM_DESC(init, "Init sequence, used with the custom argument");
-
-static unsigned long debug;
-module_param(debug, ulong, 0000);
-MODULE_PARM_DESC(debug,
-		 "level: 0-7 (the remaining 29 bits is for advanced usage)");
-
-static unsigned int verbose = 3;
-module_param(verbose, uint, 0000);
-MODULE_PARM_DESC(verbose,
-		 "0 silent, >1 show devices, >2 show devices before (default=3)");
-
-struct fbtft_device_display {
-	char *name;
-	struct spi_board_info *spi;
-	struct platform_device *pdev;
-};
-
-static void fbtft_device_pdev_release(struct device *dev);
-
-static int write_gpio16_wr_slow(struct fbtft_par *par, void *buf, size_t len);
-static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par,
-					      int xs, int ys, int xe, int ye);
-
-#define ADAFRUIT18_GAMMA \
-		"02 1c 07 12 37 32 29 2d 29 25 2B 39 00 01 03 10\n" \
-		"03 1d 07 06 2E 2C 29 2D 2E 2E 37 3F 00 00 02 10"
-
-#define CBERRY28_GAMMA \
-		"D0 00 14 15 13 2C 42 43 4E 09 16 14 18 21\n" \
-		"D0 00 14 15 13 0B 43 55 53 0C 17 14 23 20"
-
-static const s16 cberry28_init_sequence[] = {
-	/* turn off sleep mode */
-	-1, MIPI_DCS_EXIT_SLEEP_MODE,
-	-2, 120,
-
-	/* set pixel format to RGB-565 */
-	-1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT,
-
-	-1, 0xB2, 0x0C, 0x0C, 0x00, 0x33, 0x33,
-
-	/*
-	 * VGH = 13.26V
-	 * VGL = -10.43V
-	 */
-	-1, 0xB7, 0x35,
-
-	/*
-	 * VDV and VRH register values come from command write
-	 * (instead of NVM)
-	 */
-	-1, 0xC2, 0x01, 0xFF,
-
-	/*
-	 * VAP =  4.7V + (VCOM + VCOM offset + 0.5 * VDV)
-	 * VAN = -4.7V + (VCOM + VCOM offset + 0.5 * VDV)
-	 */
-	-1, 0xC3, 0x17,
-
-	/* VDV = 0V */
-	-1, 0xC4, 0x20,
-
-	/* VCOM = 0.675V */
-	-1, 0xBB, 0x17,
-
-	/* VCOM offset = 0V */
-	-1, 0xC5, 0x20,
-
-	/*
-	 * AVDD = 6.8V
-	 * AVCL = -4.8V
-	 * VDS = 2.3V
-	 */
-	-1, 0xD0, 0xA4, 0xA1,
-
-	-1, MIPI_DCS_SET_DISPLAY_ON,
-
-	-3,
-};
-
-static const s16 hy28b_init_sequence[] = {
-	-1, 0x00e7, 0x0010, -1, 0x0000, 0x0001,
-	-1, 0x0001, 0x0100, -1, 0x0002, 0x0700,
-	-1, 0x0003, 0x1030, -1, 0x0004, 0x0000,
-	-1, 0x0008, 0x0207, -1, 0x0009, 0x0000,
-	-1, 0x000a, 0x0000, -1, 0x000c, 0x0001,
-	-1, 0x000d, 0x0000, -1, 0x000f, 0x0000,
-	-1, 0x0010, 0x0000, -1, 0x0011, 0x0007,
-	-1, 0x0012, 0x0000, -1, 0x0013, 0x0000,
-	-2, 50, -1, 0x0010, 0x1590, -1, 0x0011,
-	0x0227, -2, 50, -1, 0x0012, 0x009c, -2, 50,
-	-1, 0x0013, 0x1900, -1, 0x0029, 0x0023,
-	-1, 0x002b, 0x000e, -2, 50,
-	-1, 0x0020, 0x0000, -1, 0x0021, 0x0000,
-	-2, 50, -1, 0x0050, 0x0000,
-	-1, 0x0051, 0x00ef, -1, 0x0052, 0x0000,
-	-1, 0x0053, 0x013f, -1, 0x0060, 0xa700,
-	-1, 0x0061, 0x0001, -1, 0x006a, 0x0000,
-	-1, 0x0080, 0x0000, -1, 0x0081, 0x0000,
-	-1, 0x0082, 0x0000, -1, 0x0083, 0x0000,
-	-1, 0x0084, 0x0000, -1, 0x0085, 0x0000,
-	-1, 0x0090, 0x0010, -1, 0x0092, 0x0000,
-	-1, 0x0093, 0x0003, -1, 0x0095, 0x0110,
-	-1, 0x0097, 0x0000, -1, 0x0098, 0x0000,
-	-1, 0x0007, 0x0133, -1, 0x0020, 0x0000,
-	-1, 0x0021, 0x0000, -2, 100, -3 };
-
-#define HY28B_GAMMA \
-	"04 1F 4 7 7 0 7 7 6 0\n" \
-	"0F 00 1 7 4 0 0 0 6 7"
-
-static const s16 pitft_init_sequence[] = {
-	-1, MIPI_DCS_SOFT_RESET,
-	-2, 5,
-	-1, MIPI_DCS_SET_DISPLAY_OFF,
-	-1, 0xEF, 0x03, 0x80, 0x02,
-	-1, 0xCF, 0x00, 0xC1, 0x30,
-	-1, 0xED, 0x64, 0x03, 0x12, 0x81,
-	-1, 0xE8, 0x85, 0x00, 0x78,
-	-1, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02,
-	-1, 0xF7, 0x20,
-	-1, 0xEA, 0x00, 0x00,
-	-1, 0xC0, 0x23,
-	-1, 0xC1, 0x10,
-	-1, 0xC5, 0x3E, 0x28,
-	-1, 0xC7, 0x86,
-	-1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
-	-1, 0xB1, 0x00, 0x18,
-	-1, 0xB6, 0x08, 0x82, 0x27,
-	-1, 0xF2, 0x00,
-	-1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
-	-1, 0xE0, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E,
-		0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
-	-1, 0xE1, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31,
-		0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
-	-1, MIPI_DCS_EXIT_SLEEP_MODE,
-	-2, 100,
-	-1, MIPI_DCS_SET_DISPLAY_ON,
-	-2, 20,
-	-3
-};
-
-static const s16 waveshare32b_init_sequence[] = {
-	-1, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02,
-	-1, 0xCF, 0x00, 0xC1, 0x30,
-	-1, 0xE8, 0x85, 0x00, 0x78,
-	-1, 0xEA, 0x00, 0x00,
-	-1, 0xED, 0x64, 0x03, 0x12, 0x81,
-	-1, 0xF7, 0x20,
-	-1, 0xC0, 0x23,
-	-1, 0xC1, 0x10,
-	-1, 0xC5, 0x3E, 0x28,
-	-1, 0xC7, 0x86,
-	-1, MIPI_DCS_SET_ADDRESS_MODE, 0x28,
-	-1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55,
-	-1, 0xB1, 0x00, 0x18,
-	-1, 0xB6, 0x08, 0x82, 0x27,
-	-1, 0xF2, 0x00,
-	-1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
-	-1, 0xE0, 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E,
-		0xF1, 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00,
-	-1, 0xE1, 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31,
-		0xC1, 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F,
-	-1, MIPI_DCS_EXIT_SLEEP_MODE,
-	-2, 120,
-	-1, MIPI_DCS_SET_DISPLAY_ON,
-	-1, MIPI_DCS_WRITE_MEMORY_START,
-	-3
-};
-
-#define PIOLED_GAMMA	"0 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 " \
-			"2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 " \
-			"3 3 3 4 4 4 4 4 4 4 4 4 4 4 4"
-
-/* Supported displays in alphabetical order */
-static struct fbtft_device_display displays[] = {
-	{
-		.name = "adafruit18",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_st7735r",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.gamma = ADAFRUIT18_GAMMA,
-			}
-		}
-	}, {
-		.name = "adafruit18_green",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_st7735r",
-			.max_speed_hz = 4000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-					.fbtftops.set_addr_win =
-					    adafruit18_green_tab_set_addr_win,
-				},
-				.bgr = true,
-				.gamma = ADAFRUIT18_GAMMA,
-			}
-		}
-	}, {
-		.name = "adafruit22",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_hx8340bn",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 9,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "adafruit22a",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9340",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "adafruit28",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9341",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "adafruit13m",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ssd1306",
-			.max_speed_hz = 16000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-				},
-			}
-		}
-	}, {
-		.name = "admatec_c-berry28",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_st7789v",
-			.max_speed_hz = 48000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-					.init_sequence = cberry28_init_sequence,
-				},
-				.gamma = CBERRY28_GAMMA,
-			}
-		}
-	}, {
-		.name = "agm1264k-fl",
-		.pdev = &(struct platform_device) {
-			.name = "fb_agm1264k-fl",
-			.id = 0,
-			.dev = {
-			.release = fbtft_device_pdev_release,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = FBTFT_ONBOARD_BACKLIGHT,
-				},
-			},
-			}
-		}
-	}, {
-		.name = "dogs102",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_uc1701",
-			.max_speed_hz = 8000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "er_tftm050_2",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ra8875",
-			.max_speed_hz = 5000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-					.width = 480,
-					.height = 272,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "er_tftm070_5",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ra8875",
-			.max_speed_hz = 5000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-					.width = 800,
-					.height = 480,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "ew24ha0",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_uc1611",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-				},
-			}
-		}
-	}, {
-		.name = "ew24ha0_9bit",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_uc1611",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 9,
-				},
-			}
-		}
-	}, {
-		.name = "flexfb",
-		.spi = &(struct spi_board_info) {
-			.modalias = "flexfb",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-		}
-	}, {
-		.name = "flexpfb",
-		.pdev = &(struct platform_device) {
-			.name = "flexpfb",
-			.id = 0,
-			.dev = {
-			.release = fbtft_device_pdev_release,
-			}
-		}
-	}, {
-		.name = "freetronicsoled128",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ssd1351",
-			.max_speed_hz = 20000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = FBTFT_ONBOARD_BACKLIGHT,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "hx8353d",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_hx8353d",
-			.max_speed_hz = 16000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-			}
-		}
-	}, {
-		.name = "hy28a",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9320",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.startbyte = 0x70,
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "hy28b",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9325",
-			.max_speed_hz = 48000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-					.init_sequence = hy28b_init_sequence,
-				},
-				.startbyte = 0x70,
-				.bgr = true,
-				.fps = 50,
-				.gamma = HY28B_GAMMA,
-			}
-		}
-	}, {
-		.name = "ili9481",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9481",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.regwidth = 16,
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "itdb24",
-		.pdev = &(struct platform_device) {
-			.name = "fb_s6d1121",
-			.id = 0,
-			.dev = {
-			.release = fbtft_device_pdev_release,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = false,
-			},
-			}
-		}
-	}, {
-		.name = "itdb28",
-		.pdev = &(struct platform_device) {
-			.name = "fb_ili9325",
-			.id = 0,
-			.dev = {
-			.release = fbtft_device_pdev_release,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			},
-			}
-		}
-	}, {
-		.name = "itdb28_spi",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9325",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "mi0283qt-2",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_hx8347d",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.startbyte = 0x70,
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "mi0283qt-9a",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9341",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 9,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "mi0283qt-v2",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_watterott",
-			.max_speed_hz = 4000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-			}
-		}
-	}, {
-		.name = "nokia3310",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_pcd8544",
-			.max_speed_hz = 400000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-				},
-			}
-		}
-	}, {
-		.name = "nokia3310a",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_tls8204",
-			.max_speed_hz = 1000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-				},
-			}
-		}
-	}, {
-		.name = "nokia5110",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9163",
-			.max_speed_hz = 12000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "piscreen",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9486",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.regwidth = 16,
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "pitft",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9340",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.chip_select = 0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-					.init_sequence = pitft_init_sequence,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "pioled",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ssd1351",
-			.max_speed_hz = 20000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-				},
-				.bgr = true,
-				.gamma = PIOLED_GAMMA
-			}
-		}
-	}, {
-		.name = "rpi-display",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9341",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "s6d02a1",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_s6d02a1",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "sainsmart18",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_st7735r",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-				},
-			}
-		}
-	}, {
-		.name = "sainsmart32",
-		.pdev = &(struct platform_device) {
-			.name = "fb_ssd1289",
-			.id = 0,
-			.dev = {
-			.release = fbtft_device_pdev_release,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 16,
-					.txbuflen = -2, /* disable buffer */
-					.backlight = 1,
-					.fbtftops.write = write_gpio16_wr_slow,
-				},
-				.bgr = true,
-			},
-		},
-		}
-	}, {
-		.name = "sainsmart32_fast",
-		.pdev = &(struct platform_device) {
-			.name = "fb_ssd1289",
-			.id = 0,
-			.dev = {
-			.release = fbtft_device_pdev_release,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 16,
-					.txbuflen = -2, /* disable buffer */
-					.backlight = 1,
-				},
-				.bgr = true,
-			},
-		},
-		}
-	}, {
-		.name = "sainsmart32_latched",
-		.pdev = &(struct platform_device) {
-			.name = "fb_ssd1289",
-			.id = 0,
-			.dev = {
-			.release = fbtft_device_pdev_release,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 16,
-					.txbuflen = -2, /* disable buffer */
-					.backlight = 1,
-					.fbtftops.write =
-						fbtft_write_gpio16_wr_latched,
-				},
-				.bgr = true,
-			},
-		},
-		}
-	}, {
-		.name = "sainsmart32_spi",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ssd1289",
-			.max_speed_hz = 16000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "spidev",
-		.spi = &(struct spi_board_info) {
-			.modalias = "spidev",
-			.max_speed_hz = 500000,
-			.bus_num = 0,
-			.chip_select = 0,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-			}
-		}
-	}, {
-		.name = "ssd1331",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ssd1331",
-			.max_speed_hz = 20000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-				},
-			}
-		}
-	}, {
-		.name = "tinylcd35",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_tinylcd",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "tm022hdh26",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9341",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "tontec35_9481", /* boards before 02 July 2014 */
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9481",
-			.max_speed_hz = 128000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "tontec35_9486", /* boards after 02 July 2014 */
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9486",
-			.max_speed_hz = 128000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "upd161704",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_upd161704",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-				},
-			}
-		}
-	}, {
-		.name = "waveshare32b",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_ili9340",
-			.max_speed_hz = 48000000,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-					.backlight = 1,
-					.init_sequence =
-						waveshare32b_init_sequence,
-				},
-				.bgr = true,
-			}
-		}
-	}, {
-		.name = "waveshare22",
-		.spi = &(struct spi_board_info) {
-			.modalias = "fb_bd663474",
-			.max_speed_hz = 32000000,
-			.mode = SPI_MODE_3,
-			.platform_data = &(struct fbtft_platform_data) {
-				.display = {
-					.buswidth = 8,
-				},
-			}
-		}
-	}, {
-		/* This should be the last item.
-		 * Used with the custom argument
-		 */
-		.name = "",
-		.spi = &(struct spi_board_info) {
-			.modalias = "",
-			.max_speed_hz = 0,
-			.mode = SPI_MODE_0,
-			.platform_data = &(struct fbtft_platform_data) {
-			}
-		},
-		.pdev = &(struct platform_device) {
-			.name = "",
-			.id = 0,
-			.dev = {
-				.release = fbtft_device_pdev_release,
-				.platform_data = &(struct fbtft_platform_data) {
-				},
-			},
-		},
-	}
-};
-
-static int write_gpio16_wr_slow(struct fbtft_par *par, void *buf, size_t len)
-{
-	u16 data;
-	int i;
-#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
-	static u16 prev_data;
-#endif
-
-	fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
-			  "%s(len=%zu): ", __func__, len);
-
-	while (len) {
-		data = *(u16 *)buf;
-
-		/* Start writing by pulling down /WR */
-		gpiod_set_value(par->gpio.wr, 0);
-
-		/* Set data */
-#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
-		if (data == prev_data) {
-			gpiod_set_value(par->gpio.wr, 0); /* used as delay */
-		} else {
-			for (i = 0; i < 16; i++) {
-				if ((data & 1) != (prev_data & 1))
-					gpiod_set_value(par->gpio.db[i],
-							data & 1);
-				data >>= 1;
-				prev_data >>= 1;
-			}
-		}
-#else
-		for (i = 0; i < 16; i++) {
-			gpiod_set_value(par->gpio.db[i], data & 1);
-			data >>= 1;
-		}
-#endif
-
-		/* Pullup /WR */
-		gpiod_set_value(par->gpio.wr, 1);
-
-#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
-		prev_data = *(u16 *)buf;
-#endif
-		buf += 2;
-		len -= 2;
-	}
-
-	return 0;
-}
-
-static void adafruit18_green_tab_set_addr_win(struct fbtft_par *par,
-					      int xs, int ys, int xe, int ye)
-{
-	write_reg(par, 0x2A, 0, xs + 2, 0, xe + 2);
-	write_reg(par, 0x2B, 0, ys + 1, 0, ye + 1);
-	write_reg(par, 0x2C);
-}
-
-static void fbtft_device_pdev_release(struct device *dev)
-{
-/* Needed to silence this message:
- * Device 'xxx' does not have a release() function,
- * it is broken and must be fixed
- */
-}
-
-static int spi_device_found(struct device *dev, void *data)
-{
-	struct spi_device *spi = to_spi_device(dev);
-
-	dev_info(dev, "%s %s %dkHz %d bits mode=0x%02X\n", spi->modalias,
-		 dev_name(dev), spi->max_speed_hz / 1000, spi->bits_per_word,
-		 spi->mode);
-
-	return 0;
-}
-
-static void pr_spi_devices(void)
-{
-	pr_debug("SPI devices registered:\n");
-	bus_for_each_dev(&spi_bus_type, NULL, NULL, spi_device_found);
-}
-
-static int p_device_found(struct device *dev, void *data)
-{
-	struct platform_device
-	*pdev = to_platform_device(dev);
-
-	if (strstr(pdev->name, "fb"))
-		dev_info(dev, "%s id=%d pdata? %s\n", pdev->name, pdev->id,
-			 pdev->dev.platform_data ? "yes" : "no");
-
-	return 0;
-}
-
-static void pr_p_devices(void)
-{
-	pr_debug("'fb' Platform devices registered:\n");
-	bus_for_each_dev(&platform_bus_type, NULL, NULL, p_device_found);
-}
-
-#ifdef MODULE
-static void fbtft_device_spi_delete(struct spi_master *master, unsigned int cs)
-{
-	struct device *dev;
-	char str[32];
-
-	snprintf(str, sizeof(str), "%s.%u", dev_name(&master->dev), cs);
-
-	dev = bus_find_device_by_name(&spi_bus_type, NULL, str);
-	if (dev) {
-		if (verbose)
-			dev_info(dev, "Deleting %s\n", str);
-		device_del(dev);
-	}
-}
-
-static int fbtft_device_spi_device_register(struct spi_board_info *spi)
-{
-	struct spi_master *master;
-
-	master = spi_busnum_to_master(spi->bus_num);
-	if (!master) {
-		pr_err("spi_busnum_to_master(%d) returned NULL\n",
-		       spi->bus_num);
-		return -EINVAL;
-	}
-	/* make sure it's available */
-	fbtft_device_spi_delete(master, spi->chip_select);
-	spi_device = spi_new_device(master, spi);
-	put_device(&master->dev);
-	if (!spi_device) {
-		dev_err(&master->dev, "spi_new_device() returned NULL\n");
-		return -EPERM;
-	}
-	return 0;
-}
-#else
-static int fbtft_device_spi_device_register(struct spi_board_info *spi)
-{
-	return spi_register_board_info(spi, 1);
-}
-#endif
-
-static int __init fbtft_device_init(void)
-{
-	struct spi_board_info *spi = NULL;
-	struct fbtft_platform_data *pdata;
-	bool found = false;
-	int i = 0;
-	int ret = 0;
-
-	if (!name) {
-#ifdef MODULE
-		pr_err("missing module parameter: 'name'\n");
-		return -EINVAL;
-#else
-		return 0;
-#endif
-	}
-
-	if (init_num > FBTFT_MAX_INIT_SEQUENCE) {
-		pr_err("init parameter: exceeded max array size: %d\n",
-		       FBTFT_MAX_INIT_SEQUENCE);
-		return -EINVAL;
-	}
-
-	if (verbose > 2) {
-		pr_spi_devices(); /* print list of registered SPI devices */
-		pr_p_devices(); /* print list of 'fb' platform devices */
-	}
-
-	pr_debug("name='%s', busnum=%d, cs=%d\n", name, busnum, cs);
-
-	if (rotate > 0 && rotate < 4) {
-		rotate = (4 - rotate) * 90;
-		pr_warn("argument 'rotate' should be an angle. Values 1-3 is deprecated. Setting it to %d.\n",
-			rotate);
-	}
-	if (rotate != 0 && rotate != 90 && rotate != 180 && rotate != 270) {
-		pr_warn("argument 'rotate' illegal value: %d. Setting it to 0.\n",
-			rotate);
-		rotate = 0;
-	}
-
-	/* name=list lists all supported displays */
-	if (strcmp(name, "list") == 0) {
-		pr_info("Supported displays:\n");
-
-		for (i = 0; i < ARRAY_SIZE(displays); i++)
-			pr_info("%s\n", displays[i].name);
-		return -ECANCELED;
-	}
-
-	if (custom) {
-		i = ARRAY_SIZE(displays) - 1;
-		displays[i].name = name;
-		if (speed == 0) {
-			displays[i].pdev->name = name;
-			displays[i].spi = NULL;
-		} else {
-			size_t len;
-
-			len = strlcpy(displays[i].spi->modalias, name,
-				      SPI_NAME_SIZE);
-			if (len >= SPI_NAME_SIZE)
-				pr_warn("modalias (name) truncated to: %s\n",
-					displays[i].spi->modalias);
-			displays[i].pdev = NULL;
-		}
-	}
-
-	for (i = 0; i < ARRAY_SIZE(displays); i++) {
-		if (strncmp(name, displays[i].name, SPI_NAME_SIZE) == 0) {
-			if (displays[i].spi) {
-				spi = displays[i].spi;
-				spi->chip_select = cs;
-				spi->bus_num = busnum;
-				if (speed)
-					spi->max_speed_hz = speed;
-				if (mode != -1)
-					spi->mode = mode;
-				pdata = (void *)spi->platform_data;
-			} else if (displays[i].pdev) {
-				p_device = displays[i].pdev;
-				pdata = p_device->dev.platform_data;
-			} else {
-				pr_err("broken displays array\n");
-				return -EINVAL;
-			}
-
-			pdata->rotate = rotate;
-			if (bgr == 0)
-				pdata->bgr = false;
-			else if (bgr == 1)
-				pdata->bgr = true;
-			if (startbyte)
-				pdata->startbyte = startbyte;
-			if (gamma)
-				pdata->gamma = gamma;
-			pdata->display.debug = debug;
-			if (fps)
-				pdata->fps = fps;
-			if (txbuflen)
-				pdata->txbuflen = txbuflen;
-			if (init_num)
-				pdata->display.init_sequence = init;
-			if (custom) {
-				pdata->display.width = width;
-				pdata->display.height = height;
-				pdata->display.buswidth = buswidth;
-				pdata->display.backlight = 1;
-			}
-
-			if (displays[i].spi) {
-				ret = fbtft_device_spi_device_register(spi);
-				if (ret) {
-					pr_err("failed to register SPI device\n");
-					return ret;
-				}
-			} else {
-				ret = platform_device_register(p_device);
-				if (ret < 0) {
-					pr_err("platform_device_register() returned %d\n",
-					       ret);
-					return ret;
-				}
-			}
-			found = true;
-			break;
-		}
-	}
-
-	if (!found) {
-		pr_err("display not supported: '%s'\n", name);
-		return -EINVAL;
-	}
-
-	if (spi_device && (verbose > 1))
-		pr_spi_devices();
-	if (p_device && (verbose > 1))
-		pr_p_devices();
-
-	return 0;
-}
-
-static void __exit fbtft_device_exit(void)
-{
-	if (spi_device) {
-		device_del(&spi_device->dev);
-		kfree(spi_device);
-	}
-
-	if (p_device)
-		platform_device_unregister(p_device);
-}
-
-arch_initcall(fbtft_device_init);
-module_exit(fbtft_device_exit);
-
-MODULE_DESCRIPTION("Add a FBTFT device.");
-MODULE_AUTHOR("Noralf Tronnes");
-MODULE_LICENSE("GPL");
-- 
cgit 


From cc2965091914d50330ad86911ac4306777fbf4c7 Mon Sep 17 00:00:00 2001
From: Noralf Trønnes <noralf@tronnes.org>
Date: Tue, 17 Sep 2019 19:18:43 +0200
Subject: staging/fbtft: Remove flexfb
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

flexfb was an attempt to write a generic fbtft driver that was abandoned.
All the displays it supports are supported by other fbtft drivers.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://lore.kernel.org/r/20190917171843.10334-3-noralf@tronnes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/fbtft/Kconfig  |   6 -
 drivers/staging/fbtft/Makefile |   1 -
 drivers/staging/fbtft/flexfb.c | 851 -----------------------------------------
 3 files changed, 858 deletions(-)
 delete mode 100644 drivers/staging/fbtft/flexfb.c

(limited to 'drivers/staging/fbtft')

diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig
index 4c37d087e25c..cb61c2a772bd 100644
--- a/drivers/staging/fbtft/Kconfig
+++ b/drivers/staging/fbtft/Kconfig
@@ -199,9 +199,3 @@ config FB_TFT_WATTEROTT
 	depends on FB_TFT
 	help
 	  Generic Framebuffer support for WATTEROTT
-
-config FB_FLEX
-	tristate "Generic FB driver for TFT LCD displays"
-	depends on FB_TFT
-	help
-	  Generic Framebuffer support for TFT LCD displays.
diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile
index 925ec17e318d..27af43f32f81 100644
--- a/drivers/staging/fbtft/Makefile
+++ b/drivers/staging/fbtft/Makefile
@@ -36,4 +36,3 @@ obj-$(CONFIG_FB_TFT_UC1611)      += fb_uc1611.o
 obj-$(CONFIG_FB_TFT_UC1701)      += fb_uc1701.o
 obj-$(CONFIG_FB_TFT_UPD161704)   += fb_upd161704.o
 obj-$(CONFIG_FB_TFT_WATTEROTT)   += fb_watterott.o
-obj-$(CONFIG_FB_FLEX)            += flexfb.o
diff --git a/drivers/staging/fbtft/flexfb.c b/drivers/staging/fbtft/flexfb.c
deleted file mode 100644
index 3747321011fa..000000000000
--- a/drivers/staging/fbtft/flexfb.c
+++ /dev/null
@@ -1,851 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Generic FB driver for TFT LCD displays
- *
- * Copyright (C) 2013 Noralf Tronnes
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/gpio/consumer.h>
-#include <linux/spi/spi.h>
-#include <linux/delay.h>
-
-#include "fbtft.h"
-
-#define DRVNAME	    "flexfb"
-
-static char *chip;
-module_param(chip, charp, 0000);
-MODULE_PARM_DESC(chip, "LCD controller");
-
-static unsigned int width;
-module_param(width, uint, 0000);
-MODULE_PARM_DESC(width, "Display width");
-
-static unsigned int height;
-module_param(height, uint, 0000);
-MODULE_PARM_DESC(height, "Display height");
-
-static s16 init[512];
-static int init_num;
-module_param_array(init, short, &init_num, 0000);
-MODULE_PARM_DESC(init, "Init sequence");
-
-static unsigned int setaddrwin;
-module_param(setaddrwin, uint, 0000);
-MODULE_PARM_DESC(setaddrwin, "Which set_addr_win() implementation to use");
-
-static unsigned int buswidth = 8;
-module_param(buswidth, uint, 0000);
-MODULE_PARM_DESC(buswidth, "Width of databus (default: 8)");
-
-static unsigned int regwidth = 8;
-module_param(regwidth, uint, 0000);
-MODULE_PARM_DESC(regwidth, "Width of controller register (default: 8)");
-
-static bool nobacklight;
-module_param(nobacklight, bool, 0000);
-MODULE_PARM_DESC(nobacklight, "Turn off backlight functionality.");
-
-static bool latched;
-module_param(latched, bool, 0000);
-MODULE_PARM_DESC(latched, "Use with latched 16-bit databus");
-
-static const s16 *initp;
-static int initp_num;
-
-/* default init sequences */
-static const s16 st7735r_init[] = {
-	-1, 0x01,
-	-2, 150,
-	-1, 0x11,
-	-2, 500,
-	-1, 0xB1, 0x01, 0x2C, 0x2D,
-	-1, 0xB2, 0x01, 0x2C, 0x2D,
-	-1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
-	-1, 0xB4, 0x07,
-	-1, 0xC0, 0xA2, 0x02, 0x84,
-	-1, 0xC1, 0xC5,
-	-1, 0xC2, 0x0A, 0x00,
-	-1, 0xC3, 0x8A, 0x2A,
-	-1, 0xC4, 0x8A, 0xEE,
-	-1, 0xC5, 0x0E,
-	-1, 0x20,
-	-1, 0x36, 0xC0,
-	-1, 0x3A, 0x05,
-	-1, 0xE0, 0x0f, 0x1a, 0x0f, 0x18, 0x2f, 0x28, 0x20, 0x22,
-	    0x1f, 0x1b, 0x23, 0x37, 0x00, 0x07, 0x02, 0x10,
-	-1, 0xE1, 0x0f, 0x1b, 0x0f, 0x17, 0x33, 0x2c, 0x29, 0x2e,
-	    0x30, 0x30, 0x39, 0x3f, 0x00, 0x07, 0x03, 0x10,
-	-1, 0x29,
-	-2, 100,
-	-1, 0x13,
-	-2, 10,
-	-3
-};
-
-static const s16 ssd1289_init[] = {
-	-1, 0x00, 0x0001,
-	-1, 0x03, 0xA8A4,
-	-1, 0x0C, 0x0000,
-	-1, 0x0D, 0x080C,
-	-1, 0x0E, 0x2B00,
-	-1, 0x1E, 0x00B7,
-	-1, 0x01, 0x2B3F,
-	-1, 0x02, 0x0600,
-	-1, 0x10, 0x0000,
-	-1, 0x11, 0x6070,
-	-1, 0x05, 0x0000,
-	-1, 0x06, 0x0000,
-	-1, 0x16, 0xEF1C,
-	-1, 0x17, 0x0003,
-	-1, 0x07, 0x0233,
-	-1, 0x0B, 0x0000,
-	-1, 0x0F, 0x0000,
-	-1, 0x41, 0x0000,
-	-1, 0x42, 0x0000,
-	-1, 0x48, 0x0000,
-	-1, 0x49, 0x013F,
-	-1, 0x4A, 0x0000,
-	-1, 0x4B, 0x0000,
-	-1, 0x44, 0xEF00,
-	-1, 0x45, 0x0000,
-	-1, 0x46, 0x013F,
-	-1, 0x30, 0x0707,
-	-1, 0x31, 0x0204,
-	-1, 0x32, 0x0204,
-	-1, 0x33, 0x0502,
-	-1, 0x34, 0x0507,
-	-1, 0x35, 0x0204,
-	-1, 0x36, 0x0204,
-	-1, 0x37, 0x0502,
-	-1, 0x3A, 0x0302,
-	-1, 0x3B, 0x0302,
-	-1, 0x23, 0x0000,
-	-1, 0x24, 0x0000,
-	-1, 0x25, 0x8000,
-	-1, 0x4f, 0x0000,
-	-1, 0x4e, 0x0000,
-	-1, 0x22,
-	-3
-};
-
-static const s16 hx8340bn_init[] = {
-	-1, 0xC1, 0xFF, 0x83, 0x40,
-	-1, 0x11,
-	-2, 150,
-	-1, 0xCA, 0x70, 0x00, 0xD9,
-	-1, 0xB0, 0x01, 0x11,
-	-1, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06,
-	-2, 20,
-	-1, 0xC2, 0x60, 0x71, 0x01, 0x0E, 0x05, 0x02, 0x09, 0x31, 0x0A,
-	-1, 0xC3, 0x67, 0x30, 0x61, 0x17, 0x48, 0x07, 0x05, 0x33,
-	-2, 10,
-	-1, 0xB5, 0x35, 0x20, 0x45,
-	-1, 0xB4, 0x33, 0x25, 0x4C,
-	-2, 10,
-	-1, 0x3A, 0x05,
-	-1, 0x29,
-	-2, 10,
-	-3
-};
-
-static const s16 ili9225_init[] = {
-	-1, 0x0001, 0x011C,
-	-1, 0x0002, 0x0100,
-	-1, 0x0003, 0x1030,
-	-1, 0x0008, 0x0808,
-	-1, 0x000C, 0x0000,
-	-1, 0x000F, 0x0A01,
-	-1, 0x0020, 0x0000,
-	-1, 0x0021, 0x0000,
-	-2, 50,
-	-1, 0x0010, 0x0A00,
-	-1, 0x0011, 0x1038,
-	-2, 50,
-	-1, 0x0012, 0x1121,
-	-1, 0x0013, 0x004E,
-	-1, 0x0014, 0x676F,
-	-1, 0x0030, 0x0000,
-	-1, 0x0031, 0x00DB,
-	-1, 0x0032, 0x0000,
-	-1, 0x0033, 0x0000,
-	-1, 0x0034, 0x00DB,
-	-1, 0x0035, 0x0000,
-	-1, 0x0036, 0x00AF,
-	-1, 0x0037, 0x0000,
-	-1, 0x0038, 0x00DB,
-	-1, 0x0039, 0x0000,
-	-1, 0x0050, 0x0000,
-	-1, 0x0051, 0x060A,
-	-1, 0x0052, 0x0D0A,
-	-1, 0x0053, 0x0303,
-	-1, 0x0054, 0x0A0D,
-	-1, 0x0055, 0x0A06,
-	-1, 0x0056, 0x0000,
-	-1, 0x0057, 0x0303,
-	-1, 0x0058, 0x0000,
-	-1, 0x0059, 0x0000,
-	-2, 50,
-	-1, 0x0007, 0x1017,
-	-2, 50,
-	-3
-};
-
-static const s16 ili9320_init[] = {
-	-1, 0x00E5, 0x8000,
-	-1, 0x0000, 0x0001,
-	-1, 0x0001, 0x0100,
-	-1, 0x0002, 0x0700,
-	-1, 0x0003, 0x1030,
-	-1, 0x0004, 0x0000,
-	-1, 0x0008, 0x0202,
-	-1, 0x0009, 0x0000,
-	-1, 0x000A, 0x0000,
-	-1, 0x000C, 0x0000,
-	-1, 0x000D, 0x0000,
-	-1, 0x000F, 0x0000,
-	-1, 0x0010, 0x0000,
-	-1, 0x0011, 0x0007,
-	-1, 0x0012, 0x0000,
-	-1, 0x0013, 0x0000,
-	-2, 200,
-	-1, 0x0010, 0x17B0,
-	-1, 0x0011, 0x0031,
-	-2, 50,
-	-1, 0x0012, 0x0138,
-	-2, 50,
-	-1, 0x0013, 0x1800,
-	-1, 0x0029, 0x0008,
-	-2, 50,
-	-1, 0x0020, 0x0000,
-	-1, 0x0021, 0x0000,
-	-1, 0x0030, 0x0000,
-	-1, 0x0031, 0x0505,
-	-1, 0x0032, 0x0004,
-	-1, 0x0035, 0x0006,
-	-1, 0x0036, 0x0707,
-	-1, 0x0037, 0x0105,
-	-1, 0x0038, 0x0002,
-	-1, 0x0039, 0x0707,
-	-1, 0x003C, 0x0704,
-	-1, 0x003D, 0x0807,
-	-1, 0x0050, 0x0000,
-	-1, 0x0051, 0x00EF,
-	-1, 0x0052, 0x0000,
-	-1, 0x0053, 0x013F,
-	-1, 0x0060, 0x2700,
-	-1, 0x0061, 0x0001,
-	-1, 0x006A, 0x0000,
-	-1, 0x0080, 0x0000,
-	-1, 0x0081, 0x0000,
-	-1, 0x0082, 0x0000,
-	-1, 0x0083, 0x0000,
-	-1, 0x0084, 0x0000,
-	-1, 0x0085, 0x0000,
-	-1, 0x0090, 0x0010,
-	-1, 0x0092, 0x0000,
-	-1, 0x0093, 0x0003,
-	-1, 0x0095, 0x0110,
-	-1, 0x0097, 0x0000,
-	-1, 0x0098, 0x0000,
-	-1, 0x0007, 0x0173,
-	-3
-};
-
-static const s16 ili9325_init[] = {
-	-1, 0x00E3, 0x3008,
-	-1, 0x00E7, 0x0012,
-	-1, 0x00EF, 0x1231,
-	-1, 0x0001, 0x0100,
-	-1, 0x0002, 0x0700,
-	-1, 0x0003, 0x1030,
-	-1, 0x0004, 0x0000,
-	-1, 0x0008, 0x0207,
-	-1, 0x0009, 0x0000,
-	-1, 0x000A, 0x0000,
-	-1, 0x000C, 0x0000,
-	-1, 0x000D, 0x0000,
-	-1, 0x000F, 0x0000,
-	-1, 0x0010, 0x0000,
-	-1, 0x0011, 0x0007,
-	-1, 0x0012, 0x0000,
-	-1, 0x0013, 0x0000,
-	-2, 200,
-	-1, 0x0010, 0x1690,
-	-1, 0x0011, 0x0223,
-	-2, 50,
-	-1, 0x0012, 0x000D,
-	-2, 50,
-	-1, 0x0013, 0x1200,
-	-1, 0x0029, 0x000A,
-	-1, 0x002B, 0x000C,
-	-2, 50,
-	-1, 0x0020, 0x0000,
-	-1, 0x0021, 0x0000,
-	-1, 0x0030, 0x0000,
-	-1, 0x0031, 0x0506,
-	-1, 0x0032, 0x0104,
-	-1, 0x0035, 0x0207,
-	-1, 0x0036, 0x000F,
-	-1, 0x0037, 0x0306,
-	-1, 0x0038, 0x0102,
-	-1, 0x0039, 0x0707,
-	-1, 0x003C, 0x0702,
-	-1, 0x003D, 0x1604,
-	-1, 0x0050, 0x0000,
-	-1, 0x0051, 0x00EF,
-	-1, 0x0052, 0x0000,
-	-1, 0x0053, 0x013F,
-	-1, 0x0060, 0xA700,
-	-1, 0x0061, 0x0001,
-	-1, 0x006A, 0x0000,
-	-1, 0x0080, 0x0000,
-	-1, 0x0081, 0x0000,
-	-1, 0x0082, 0x0000,
-	-1, 0x0083, 0x0000,
-	-1, 0x0084, 0x0000,
-	-1, 0x0085, 0x0000,
-	-1, 0x0090, 0x0010,
-	-1, 0x0092, 0x0600,
-	-1, 0x0007, 0x0133,
-	-3
-};
-
-static const s16 ili9341_init[] = {
-	-1, 0x28,
-	-2, 20,
-	-1, 0xCF, 0x00, 0x83, 0x30,
-	-1, 0xED, 0x64, 0x03, 0x12, 0x81,
-	-1, 0xE8, 0x85, 0x01, 0x79,
-	-1, 0xCB, 0x39, 0x2c, 0x00, 0x34, 0x02,
-	-1, 0xF7, 0x20,
-	-1, 0xEA, 0x00, 0x00,
-	-1, 0xC0, 0x26,
-	-1, 0xC1, 0x11,
-	-1, 0xC5, 0x35, 0x3E,
-	-1, 0xC7, 0xBE,
-	-1, 0xB1, 0x00, 0x1B,
-	-1, 0xB6, 0x0a, 0x82, 0x27, 0x00,
-	-1, 0xB7, 0x07,
-	-1, 0x3A, 0x55,
-	-1, 0x36, 0x48,
-	-1, 0x11,
-	-2, 120,
-	-1, 0x29,
-	-2, 20,
-	-3
-};
-
-static const s16 ssd1351_init[] = {
-	-1, 0xfd, 0x12,
-	-1, 0xfd, 0xb1,
-	-1, 0xae,
-	-1, 0xb3, 0xf1,
-	-1, 0xca, 0x7f,
-	-1, 0xa0, 0x74,
-	-1, 0x15, 0x00, 0x7f,
-	-1, 0x75, 0x00, 0x7f,
-	-1, 0xa1, 0x00,
-	-1, 0xa2, 0x00,
-	-1, 0xb5, 0x00,
-	-1, 0xab, 0x01,
-	-1, 0xb1, 0x32,
-	-1, 0xb4, 0xa0, 0xb5, 0x55,
-	-1, 0xbb, 0x17,
-	-1, 0xbe, 0x05,
-	-1, 0xc1, 0xc8, 0x80, 0xc8,
-	-1, 0xc7, 0x0f,
-	-1, 0xb6, 0x01,
-	-1, 0xa6,
-	-1, 0xaf,
-	-3
-};
-
-/**
- * struct flexfb_lcd_controller - Describes the LCD controller properties
- * @name: Model name of the chip
- * @width: Width of display in pixels
- * @height: Height of display in pixels
- * @setaddrwin: Which set_addr_win() implementation to use
- * @regwidth: LCD Controller Register width in bits
- * @init_seq: LCD initialization sequence
- * @init_seq_sz: Size of LCD initialization sequence
- */
-struct flexfb_lcd_controller {
-	const char *name;
-	unsigned int width;
-	unsigned int height;
-	unsigned int setaddrwin;
-	unsigned int regwidth;
-	const s16 *init_seq;
-	int init_seq_sz;
-};
-
-static const struct flexfb_lcd_controller flexfb_chip_table[] = {
-	{
-		.name = "st7735r",
-		.width = 120,
-		.height = 160,
-		.init_seq = st7735r_init,
-		.init_seq_sz = ARRAY_SIZE(st7735r_init),
-	},
-	{
-		.name = "hx8340bn",
-		.width = 176,
-		.height = 220,
-		.init_seq = hx8340bn_init,
-		.init_seq_sz = ARRAY_SIZE(hx8340bn_init),
-	},
-	{
-		.name = "ili9225",
-		.width = 176,
-		.height = 220,
-		.regwidth = 16,
-		.init_seq = ili9225_init,
-		.init_seq_sz = ARRAY_SIZE(ili9225_init),
-	},
-	{
-		.name = "ili9320",
-		.width = 240,
-		.height = 320,
-		.setaddrwin = 1,
-		.regwidth = 16,
-		.init_seq = ili9320_init,
-		.init_seq_sz = ARRAY_SIZE(ili9320_init),
-	},
-	{
-		.name = "ili9325",
-		.width = 240,
-		.height = 320,
-		.setaddrwin = 1,
-		.regwidth = 16,
-		.init_seq = ili9325_init,
-		.init_seq_sz = ARRAY_SIZE(ili9325_init),
-	},
-	{
-		.name = "ili9341",
-		.width = 240,
-		.height = 320,
-		.init_seq = ili9341_init,
-		.init_seq_sz = ARRAY_SIZE(ili9341_init),
-	},
-	{
-		.name = "ssd1289",
-		.width = 240,
-		.height = 320,
-		.setaddrwin = 2,
-		.regwidth = 16,
-		.init_seq = ssd1289_init,
-		.init_seq_sz = ARRAY_SIZE(ssd1289_init),
-	},
-	{
-		.name = "ssd1351",
-		.width = 128,
-		.height = 128,
-		.setaddrwin = 3,
-		.init_seq = ssd1351_init,
-		.init_seq_sz = ARRAY_SIZE(ssd1351_init),
-	},
-};
-
-/* ili9320, ili9325 */
-static void flexfb_set_addr_win_1(struct fbtft_par *par,
-				  int xs, int ys, int xe, int ye)
-{
-	switch (par->info->var.rotate) {
-	/* R20h = Horizontal GRAM Start Address */
-	/* R21h = Vertical GRAM Start Address */
-	case 0:
-		write_reg(par, 0x0020, xs);
-		write_reg(par, 0x0021, ys);
-		break;
-	case 180:
-		write_reg(par, 0x0020, width - 1 - xs);
-		write_reg(par, 0x0021, height - 1 - ys);
-		break;
-	case 270:
-		write_reg(par, 0x0020, width - 1 - ys);
-		write_reg(par, 0x0021, xs);
-		break;
-	case 90:
-		write_reg(par, 0x0020, ys);
-		write_reg(par, 0x0021, height - 1 - xs);
-		break;
-	}
-	write_reg(par, 0x0022); /* Write Data to GRAM */
-}
-
-/* ssd1289 */
-static void flexfb_set_addr_win_2(struct fbtft_par *par,
-				  int xs, int ys, int xe, int ye)
-{
-	switch (par->info->var.rotate) {
-	/* R4Eh - Set GDDRAM X address counter */
-	/* R4Fh - Set GDDRAM Y address counter */
-	case 0:
-		write_reg(par, 0x4e, xs);
-		write_reg(par, 0x4f, ys);
-		break;
-	case 180:
-		write_reg(par, 0x4e, par->info->var.xres - 1 - xs);
-		write_reg(par, 0x4f, par->info->var.yres - 1 - ys);
-		break;
-	case 270:
-		write_reg(par, 0x4e, par->info->var.yres - 1 - ys);
-		write_reg(par, 0x4f, xs);
-		break;
-	case 90:
-		write_reg(par, 0x4e, ys);
-		write_reg(par, 0x4f, par->info->var.xres - 1 - xs);
-		break;
-	}
-
-	/* R22h - RAM data write */
-	write_reg(par, 0x22, 0);
-}
-
-/* ssd1351 */
-static void set_addr_win_3(struct fbtft_par *par,
-			   int xs, int ys, int xe, int ye)
-{
-	write_reg(par, 0x15, xs, xe);
-	write_reg(par, 0x75, ys, ye);
-	write_reg(par, 0x5C);
-}
-
-static int flexfb_verify_gpios_dc(struct fbtft_par *par)
-{
-	fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__);
-
-	if (!par->gpio.dc) {
-		dev_err(par->info->device,
-			"Missing info about 'dc' gpio. Aborting.\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int flexfb_verify_gpios_db(struct fbtft_par *par)
-{
-	int i;
-	int num_db = buswidth;
-
-	fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__);
-
-	if (!par->gpio.dc) {
-		dev_err(par->info->device, "Missing info about 'dc' gpio. Aborting.\n");
-		return -EINVAL;
-	}
-	if (!par->gpio.wr) {
-		dev_err(par->info->device, "Missing info about 'wr' gpio. Aborting.\n");
-		return -EINVAL;
-	}
-	if (latched && !par->gpio.latch) {
-		dev_err(par->info->device, "Missing info about 'latch' gpio. Aborting.\n");
-		return -EINVAL;
-	}
-	if (latched)
-		num_db = buswidth / 2;
-	for (i = 0; i < num_db; i++) {
-		if (!par->gpio.db[i]) {
-			dev_err(par->info->device,
-				"Missing info about 'db%02d' gpio. Aborting.\n",
-				i);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-static void flexfb_chip_load_param(const struct flexfb_lcd_controller *chip)
-{
-	if (!width)
-		width = chip->width;
-	if (!height)
-		height = chip->height;
-	setaddrwin = chip->setaddrwin;
-	if (chip->regwidth)
-		regwidth = chip->regwidth;
-	if (!init_num) {
-		initp = chip->init_seq;
-		initp_num = chip->init_seq_sz;
-	}
-}
-
-static struct fbtft_display flex_display = { };
-
-static int flexfb_chip_init(const struct device *dev)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(flexfb_chip_table); i++)
-		if (!strcmp(chip, flexfb_chip_table[i].name)) {
-			flexfb_chip_load_param(&flexfb_chip_table[i]);
-			return 0;
-		}
-
-	dev_err(dev, "chip=%s is not supported\n", chip);
-
-	return -EINVAL;
-}
-
-static int flexfb_probe_common(struct spi_device *sdev,
-			       struct platform_device *pdev)
-{
-	struct device *dev;
-	struct fb_info *info;
-	struct fbtft_par *par;
-	int ret;
-
-	initp = init;
-	initp_num = init_num;
-
-	if (sdev)
-		dev = &sdev->dev;
-	else
-		dev = &pdev->dev;
-
-	fbtft_init_dbg(dev, "%s(%s)\n", __func__,
-		       sdev ? "'SPI device'" : "'Platform device'");
-
-	if (chip) {
-		ret = flexfb_chip_init(dev);
-		if (ret)
-			return ret;
-	}
-
-	if (width == 0 || height == 0) {
-		dev_err(dev, "argument(s) missing: width and height has to be set.\n");
-		return -EINVAL;
-	}
-	flex_display.width = width;
-	flex_display.height = height;
-	fbtft_init_dbg(dev, "Display resolution: %dx%d\n", width, height);
-	fbtft_init_dbg(dev, "chip = %s\n", chip ? chip : "not set");
-	fbtft_init_dbg(dev, "setaddrwin = %d\n", setaddrwin);
-	fbtft_init_dbg(dev, "regwidth = %d\n", regwidth);
-	fbtft_init_dbg(dev, "buswidth = %d\n", buswidth);
-
-	info = fbtft_framebuffer_alloc(&flex_display, dev, dev->platform_data);
-	if (!info)
-		return -ENOMEM;
-
-	par = info->par;
-	if (sdev)
-		par->spi = sdev;
-	else
-		par->pdev = pdev;
-	if (!par->init_sequence)
-		par->init_sequence = initp;
-	par->fbtftops.init_display = fbtft_init_display;
-
-	/* registerwrite functions */
-	switch (regwidth) {
-	case 8:
-		par->fbtftops.write_register = fbtft_write_reg8_bus8;
-		break;
-	case 16:
-		par->fbtftops.write_register = fbtft_write_reg16_bus8;
-		break;
-	default:
-		dev_err(dev,
-			"argument 'regwidth': %d is not supported.\n",
-			regwidth);
-		return -EINVAL;
-	}
-
-	/* bus functions */
-	if (sdev) {
-		par->fbtftops.write = fbtft_write_spi;
-		switch (buswidth) {
-		case 8:
-			par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
-			if (!par->startbyte)
-				par->fbtftops.verify_gpios = flexfb_verify_gpios_dc;
-			break;
-		case 9:
-			if (regwidth == 16) {
-				dev_err(dev, "argument 'regwidth': %d is not supported with buswidth=%d and SPI.\n",
-					regwidth, buswidth);
-				return -EINVAL;
-			}
-			par->fbtftops.write_register = fbtft_write_reg8_bus9;
-			par->fbtftops.write_vmem = fbtft_write_vmem16_bus9;
-			if (par->spi->master->bits_per_word_mask
-			    & SPI_BPW_MASK(9)) {
-				par->spi->bits_per_word = 9;
-				break;
-			}
-
-			dev_warn(dev,
-				 "9-bit SPI not available, emulating using 8-bit.\n");
-			/* allocate buffer with room for dc bits */
-			par->extra = devm_kzalloc(par->info->device,
-						  par->txbuf.len
-						  + (par->txbuf.len / 8) + 8,
-						  GFP_KERNEL);
-			if (!par->extra) {
-				ret = -ENOMEM;
-				goto out_release;
-			}
-			par->fbtftops.write = fbtft_write_spi_emulate_9;
-
-			break;
-		default:
-			dev_err(dev,
-				"argument 'buswidth': %d is not supported with SPI.\n",
-				buswidth);
-			return -EINVAL;
-		}
-	} else {
-		par->fbtftops.verify_gpios = flexfb_verify_gpios_db;
-		switch (buswidth) {
-		case 8:
-			par->fbtftops.write = fbtft_write_gpio8_wr;
-			par->fbtftops.write_vmem = fbtft_write_vmem16_bus8;
-			break;
-		case 16:
-			par->fbtftops.write_register = fbtft_write_reg16_bus16;
-			if (latched)
-				par->fbtftops.write = fbtft_write_gpio16_wr_latched;
-			else
-				par->fbtftops.write = fbtft_write_gpio16_wr;
-			par->fbtftops.write_vmem = fbtft_write_vmem16_bus16;
-			break;
-		default:
-			dev_err(dev,
-				"argument 'buswidth': %d is not supported with parallel.\n",
-				buswidth);
-			return -EINVAL;
-		}
-	}
-
-	/* set_addr_win function */
-	switch (setaddrwin) {
-	case 0:
-		/* use default */
-		break;
-	case 1:
-		par->fbtftops.set_addr_win = flexfb_set_addr_win_1;
-		break;
-	case 2:
-		par->fbtftops.set_addr_win = flexfb_set_addr_win_2;
-		break;
-	case 3:
-		par->fbtftops.set_addr_win = set_addr_win_3;
-		break;
-	default:
-		dev_err(dev, "argument 'setaddrwin': unknown value %d.\n",
-			setaddrwin);
-		return -EINVAL;
-	}
-
-	if (!nobacklight)
-		par->fbtftops.register_backlight = fbtft_register_backlight;
-
-	ret = fbtft_register_framebuffer(info);
-	if (ret < 0)
-		goto out_release;
-
-	return 0;
-
-out_release:
-	fbtft_framebuffer_release(info);
-
-	return ret;
-}
-
-static int flexfb_remove_common(struct device *dev, struct fb_info *info)
-{
-	struct fbtft_par *par;
-
-	if (!info)
-		return -EINVAL;
-	par = info->par;
-	if (par)
-		fbtft_par_dbg(DEBUG_DRIVER_INIT_FUNCTIONS, par, "%s()\n",
-			      __func__);
-	fbtft_unregister_framebuffer(info);
-	fbtft_framebuffer_release(info);
-
-	return 0;
-}
-
-static int flexfb_probe_spi(struct spi_device *spi)
-{
-	return flexfb_probe_common(spi, NULL);
-}
-
-static int flexfb_remove_spi(struct spi_device *spi)
-{
-	struct fb_info *info = spi_get_drvdata(spi);
-
-	return flexfb_remove_common(&spi->dev, info);
-}
-
-static int flexfb_probe_pdev(struct platform_device *pdev)
-{
-	return flexfb_probe_common(NULL, pdev);
-}
-
-static int flexfb_remove_pdev(struct platform_device *pdev)
-{
-	struct fb_info *info = platform_get_drvdata(pdev);
-
-	return flexfb_remove_common(&pdev->dev, info);
-}
-
-static struct spi_driver flexfb_spi_driver = {
-	.driver = {
-		.name   = DRVNAME,
-	},
-	.probe  = flexfb_probe_spi,
-	.remove = flexfb_remove_spi,
-};
-
-static const struct platform_device_id flexfb_platform_ids[] = {
-	{ "flexpfb", 0 },
-	{ },
-};
-MODULE_DEVICE_TABLE(platform, flexfb_platform_ids);
-
-static struct platform_driver flexfb_platform_driver = {
-	.driver = {
-		.name   = DRVNAME,
-	},
-	.id_table = flexfb_platform_ids,
-	.probe  = flexfb_probe_pdev,
-	.remove = flexfb_remove_pdev,
-};
-
-static int __init flexfb_init(void)
-{
-	int ret, ret2;
-
-	ret = spi_register_driver(&flexfb_spi_driver);
-	ret2 = platform_driver_register(&flexfb_platform_driver);
-	if (ret < 0)
-		return ret;
-	return ret2;
-}
-
-static void __exit flexfb_exit(void)
-{
-	spi_unregister_driver(&flexfb_spi_driver);
-	platform_driver_unregister(&flexfb_platform_driver);
-}
-
-/* ------------------------------------------------------------------------- */
-
-module_init(flexfb_init);
-module_exit(flexfb_exit);
-
-MODULE_DESCRIPTION("Generic FB driver for TFT LCD displays");
-MODULE_AUTHOR("Noralf Tronnes");
-MODULE_LICENSE("GPL");
-- 
cgit 


From 5bdea6060618cfcf1459dca137e89aee038ac8b9 Mon Sep 17 00:00:00 2001
From: Navid Emamdoost <navid.emamdoost@gmail.com>
Date: Sun, 29 Sep 2019 22:09:45 -0500
Subject: Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc

In fbtft_framebuffer_alloc the error handling path should take care of
releasing frame buffer after it is allocated via framebuffer_alloc, too.
Therefore, in two failure cases the goto destination is changed to
address this issue.

Fixes: c296d5f9957c ("staging: fbtft: core support")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190930030949.28615-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/fbtft/fbtft-core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'drivers/staging/fbtft')

diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c
index cf5700a2ea66..a0a67aa517f0 100644
--- a/drivers/staging/fbtft/fbtft-core.c
+++ b/drivers/staging/fbtft/fbtft-core.c
@@ -714,7 +714,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
 	if (par->gamma.curves && gamma) {
 		if (fbtft_gamma_parse_str(par, par->gamma.curves, gamma,
 					  strlen(gamma)))
-			goto alloc_fail;
+			goto release_framebuf;
 	}
 
 	/* Transmit buffer */
@@ -731,7 +731,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
 	if (txbuflen > 0) {
 		txbuf = devm_kzalloc(par->info->device, txbuflen, GFP_KERNEL);
 		if (!txbuf)
-			goto alloc_fail;
+			goto release_framebuf;
 		par->txbuf.buf = txbuf;
 		par->txbuf.len = txbuflen;
 	}
@@ -753,6 +753,9 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
 
 	return info;
 
+release_framebuf:
+	framebuffer_release(info);
+
 alloc_fail:
 	vfree(vmem);
 
-- 
cgit