From 250e211057c7237dc75634b1372a1a3bd58dcd96 Mon Sep 17 00:00:00 2001 From: Pramod Kumar Date: Thu, 3 Jan 2019 14:25:33 +0530 Subject: thermal: broadcom: Add Stingray thermal driver Stingray SoC has six temperature sensor and those are configured, controlled and accessed to read temperature and update in DDR memory using m0 firmware. All six sensors has been given 4 bytes of memory in DDR to write temperature in millivolts. This thermal driver read temperature values from DDR because no direct access to sensors. Like this all temparature sensors are monitored and trips at critical temperature. If driver can't handle thermal runaways because of any unknown reason, then firmware in m0 Processor will handle. Reviewed-by: Ray Jui Reviewed-by: Scott Branden Reviewed-by: Vikram Prakash Reviewed-by: Rob Herring Signed-off-by: Pramod Kumar Signed-off-by: Srinath Mannam Signed-off-by: Eduardo Valentin --- drivers/thermal/Kconfig | 3 +- drivers/thermal/broadcom/Kconfig | 9 +++ drivers/thermal/broadcom/Makefile | 1 + drivers/thermal/broadcom/sr-thermal.c | 121 ++++++++++++++++++++++++++++++++++ 4 files changed, 133 insertions(+), 1 deletion(-) create mode 100644 drivers/thermal/broadcom/sr-thermal.c (limited to 'drivers/thermal') diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 30323426902e..b71a774367f6 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -343,7 +343,8 @@ source "drivers/thermal/intel/Kconfig" endmenu menu "Broadcom thermal drivers" -depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST +depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || ARCH_BCM_IPROC || \ + COMPILE_TEST source "drivers/thermal/broadcom/Kconfig" endmenu diff --git a/drivers/thermal/broadcom/Kconfig b/drivers/thermal/broadcom/Kconfig index c106a15bf7f9..dc9a9bdde3ed 100644 --- a/drivers/thermal/broadcom/Kconfig +++ b/drivers/thermal/broadcom/Kconfig @@ -22,3 +22,12 @@ config BCM_NS_THERMAL BCM4708, BCM4709, BCM5301x, BCM95852X, etc). It contains DMU (Device Management Unit) block with a thermal sensor that allows checking CPU temperature. + +config BCM_SR_THERMAL + tristate "Stingray thermal driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + default ARCH_BCM_IPROC + help + Support for the Stingray family of SoCs. Its different blocks like + iHost, CRMU and NITRO has thermal sensor that allows checking its + temperature. diff --git a/drivers/thermal/broadcom/Makefile b/drivers/thermal/broadcom/Makefile index fae10ecafaef..79df69eb2b8c 100644 --- a/drivers/thermal/broadcom/Makefile +++ b/drivers/thermal/broadcom/Makefile @@ -1,3 +1,4 @@ obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o obj-$(CONFIG_BRCMSTB_THERMAL) += brcmstb_thermal.o obj-$(CONFIG_BCM_NS_THERMAL) += ns-thermal.o +obj-$(CONFIG_BCM_SR_THERMAL) += sr-thermal.o diff --git a/drivers/thermal/broadcom/sr-thermal.c b/drivers/thermal/broadcom/sr-thermal.c new file mode 100644 index 000000000000..2284cbecedf3 --- /dev/null +++ b/drivers/thermal/broadcom/sr-thermal.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 Broadcom + */ + +#include +#include +#include +#include +#include + +/* + * In stingray thermal IO memory, + * Total Number of available TMONs MASK is at offset 0 + * temperature registers BASE is at 4 byte offset. + * Each TMON temperature register size is 4. + */ +#define SR_TMON_TEMP_BASE(id) ((id) * 0x4) + +#define SR_TMON_MAX_LIST 6 + +struct sr_tmon { + struct thermal_zone_device *tz; + unsigned int crit_temp; + unsigned int tmon_id; + struct sr_thermal *priv; +}; + +struct sr_thermal { + void __iomem *regs; + unsigned int max_crit_temp; + struct sr_tmon tmon[SR_TMON_MAX_LIST]; +}; + +static int sr_get_temp(void *data, int *temp) +{ + struct sr_tmon *tmon = data; + struct sr_thermal *sr_thermal = tmon->priv; + + *temp = readl(sr_thermal->regs + SR_TMON_TEMP_BASE(tmon->tmon_id)); + + return 0; +} + +static const struct thermal_zone_of_device_ops sr_tz_ops = { + .get_temp = sr_get_temp, +}; + +static int sr_thermal_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct sr_thermal *sr_thermal; + struct sr_tmon *tmon; + struct resource *res; + u32 sr_tmon_list = 0; + unsigned int i; + int ret; + + sr_thermal = devm_kzalloc(dev, sizeof(*sr_thermal), GFP_KERNEL); + if (!sr_thermal) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sr_thermal->regs = (void __iomem *)devm_memremap(&pdev->dev, res->start, + resource_size(res), + MEMREMAP_WB); + if (IS_ERR(sr_thermal->regs)) { + dev_err(dev, "failed to get io address\n"); + return PTR_ERR(sr_thermal->regs); + } + + ret = device_property_read_u32(dev, "brcm,tmon-mask", &sr_tmon_list); + if (ret) + return ret; + + tmon = sr_thermal->tmon; + for (i = 0; i < SR_TMON_MAX_LIST; i++, tmon++) { + if (!(sr_tmon_list & BIT(i))) + continue; + + /* Flush temperature registers */ + writel(0, sr_thermal->regs + SR_TMON_TEMP_BASE(i)); + tmon->tmon_id = i; + tmon->priv = sr_thermal; + tmon->tz = devm_thermal_zone_of_sensor_register(dev, i, tmon, + &sr_tz_ops); + if (IS_ERR(tmon->tz)) + return PTR_ERR(tmon->tz); + + dev_dbg(dev, "thermal sensor %d registered\n", i); + } + platform_set_drvdata(pdev, sr_thermal); + + return 0; +} + +static const struct of_device_id sr_thermal_of_match[] = { + { .compatible = "brcm,sr-thermal", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sr_thermal_of_match); + +static const struct acpi_device_id sr_thermal_acpi_ids[] = { + { .id = "BRCM0500" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(acpi, sr_thermal_acpi_ids); + +static struct platform_driver sr_thermal_driver = { + .probe = sr_thermal_probe, + .driver = { + .name = "sr-thermal", + .of_match_table = sr_thermal_of_match, + .acpi_match_table = ACPI_PTR(sr_thermal_acpi_ids), + }, +}; +module_platform_driver(sr_thermal_driver); + +MODULE_AUTHOR("Pramod Kumar "); +MODULE_DESCRIPTION("Stingray thermal driver"); +MODULE_LICENSE("GPL v2"); -- cgit