From f0b94c1c5c7994a74e487f43c91cfc922105a423 Mon Sep 17 00:00:00 2001 From: Gil Fine Date: Thu, 30 Nov 2023 18:17:13 +0200 Subject: thunderbolt: Fix minimum allocated USB 3.x and PCIe bandwidth With the current bandwidth allocation we end up reserving too much for the USB 3.x and PCIe tunnels that leads to reduced capabilities for the second DisplayPort tunnel. Fix this by decreasing the USB 3.x allocation to 900 Mb/s which then allows both tunnels to get the maximum HBR2 bandwidth. This way, the reserved bandwidth for USB 3.x and PCIe, would be 1350 Mb/s (taking weights of USB 3.x and PCIe into account). So bandwidth allocations on a link are: USB 3.x + PCIe tunnels => 1350 Mb/s DisplayPort tunnel #1 => 17280 Mb/s DisplayPort tunnel #2 => 17280 Mb/s Total consumed bandwidth is 35910 Mb/s. So that all the above can be tunneled on a Gen 3 link (which allows maximum of 36000 Mb/s). Fixes: 582e70b0d3a4 ("thunderbolt: Change bandwidth reservations to comply USB4 v2") Signed-off-by: Gil Fine Signed-off-by: Mika Westerberg --- drivers/thunderbolt/usb4.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/thunderbolt') diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index 4277733d0021..f8f0d24ff6e4 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -2311,13 +2311,13 @@ int usb4_usb3_port_release_bandwidth(struct tb_port *port, int *upstream_bw, goto err_request; /* - * Always keep 1000 Mb/s to make sure xHCI has at least some + * Always keep 900 Mb/s to make sure xHCI has at least some * bandwidth available for isochronous traffic. */ - if (consumed_up < 1000) - consumed_up = 1000; - if (consumed_down < 1000) - consumed_down = 1000; + if (consumed_up < 900) + consumed_up = 900; + if (consumed_down < 900) + consumed_down = 900; ret = usb4_usb3_port_write_allocated_bandwidth(port, consumed_up, consumed_down); -- cgit