From fc64f7abbef2dae7ee4c94702fb3cf9a2be5431a Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Sun, 6 Oct 2019 11:33:12 -0500 Subject: serial: 8250_omap: Fix gpio check for auto RTS/CTS There are two checks to see if the manual gpio is configured, but these the check is seeing if the structure is NULL instead it should check to see if there are CTS and/or RTS pins defined. This patch uses checks for those individual pins instead of checking for the structure itself to restore auto RTS/CTS. Signed-off-by: Adam Ford Reviewed-by: Yegor Yefremov Link: https://lore.kernel.org/r/20191006163314.23191-2-aford173@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_omap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/tty/serial/8250/8250_omap.c') diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index c68e2b3a1634..836e736ae188 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -141,7 +141,7 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) serial8250_do_set_mctrl(port, mctrl); - if (!up->gpios) { + if (!mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS)) { /* * Turn off autoRTS if RTS is lowered and restore autoRTS * setting if RTS is raised @@ -456,7 +456,8 @@ static void omap_8250_set_termios(struct uart_port *port, up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW && - !up->gpios) { + !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS) && + !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_CTS)) { /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; priv->efr |= UART_EFR_CTS; -- cgit