From 0e0b989eb330f0167c191a5c223be352f348c9c0 Mon Sep 17 00:00:00 2001 From: Ed Blake Date: Thu, 10 Nov 2016 18:07:56 +0000 Subject: serial: 8250_dw: Add support for IrDA SIR mode Add a set_ldisc function to enable/disable IrDA SIR mode according to the new line discipline, if IrDA SIR mode is supported by the hardware configuration. Signed-off-by: Ed Blake Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 459d726f9d59..c89fafc972b6 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -53,6 +53,8 @@ /* Helper for fifo size calculation */ #define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16) +/* DesignWare specific register fields */ +#define DW_UART_MCR_SIRE BIT(6) struct dw8250_data { u8 usr_reg; @@ -254,6 +256,22 @@ out: serial8250_do_set_termios(p, termios, old); } +static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios) +{ + struct uart_8250_port *up = up_to_u8250p(p); + unsigned int mcr = p->serial_in(p, UART_MCR); + + if (up->capabilities & UART_CAP_IRDA) { + if (termios->c_line == N_IRDA) + mcr |= DW_UART_MCR_SIRE; + else + mcr &= ~DW_UART_MCR_SIRE; + + p->serial_out(p, UART_MCR, mcr); + } + serial8250_do_set_ldisc(p, termios); +} + /* * dw8250_fallback_dma_filter will prevent the UART from getting just any free * channel on platforms that have DMA engines, but don't have any channels @@ -357,6 +375,9 @@ static void dw8250_setup_port(struct uart_port *p) if (reg & DW_UART_CPR_AFCE_MODE) up->capabilities |= UART_CAP_AFE; + + if (reg & DW_UART_CPR_SIR_MODE) + up->capabilities |= UART_CAP_IRDA; } static int dw8250_probe(struct platform_device *pdev) @@ -392,6 +413,7 @@ static int dw8250_probe(struct platform_device *pdev) p->iotype = UPIO_MEM; p->serial_in = dw8250_serial_in; p->serial_out = dw8250_serial_out; + p->set_ldisc = dw8250_set_ldisc; p->membase = devm_ioremap(dev, regs->start, resource_size(regs)); if (!p->membase) -- cgit