From d3d079bde07e1b7deaeb57506dc0b86010121d17 Mon Sep 17 00:00:00 2001 From: Valentin Caron Date: Tue, 11 Jan 2022 17:44:40 +0100 Subject: serial: stm32: prevent TDR register overwrite when sending x_char When sending x_char in stm32_usart_transmit_chars(), driver can overwrite the value of TDR register by the value of x_char. If this happens, the previous value that was present in TDR register will not be sent through uart. This code checks if the previous value in TDR register is sent before writing the x_char value into register. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable Signed-off-by: Valentin Caron Link: https://lore.kernel.org/r/20220111164441.6178-2-valentin.caron@foss.st.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/stm32-usart.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 1f89ab0e49ac..c1b8828451c8 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -550,11 +550,23 @@ static void stm32_usart_transmit_chars(struct uart_port *port) struct stm32_port *stm32_port = to_stm32_port(port); const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; struct circ_buf *xmit = &port->state->xmit; + u32 isr; + int ret; if (port->x_char) { if (stm32_usart_tx_dma_started(stm32_port) && stm32_usart_tx_dma_enabled(stm32_port)) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT); + + /* Check that TDR is empty before filling FIFO */ + ret = + readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr, + isr, + (isr & USART_SR_TXE), + 10, 1000); + if (ret) + dev_warn(port->dev, "1 character may be erased\n"); + writel_relaxed(port->x_char, port->membase + ofs->tdr); port->x_char = 0; port->icount.tx++; -- cgit