From f148b9f402ef002b57bcff3964d45abc8ffb6c3f Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 10 Feb 2020 15:45:50 +0200 Subject: xhci: Force Maximum Packet size for Full-speed bulk devices to valid range. A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum Packet Size of 4 causes a xHC "Parameter Error" at enumeration. This is because valid Maximum packet sizes for Full-speed bulk endpoints are 8, 16, 32 and 64 bytes. Hosts are not required to support other values than these. See usb 2 specs section 5.8.3 for details. The device starts working after forcing the maximum packet size to 8. This is most likely the case with other devices as well, so force the maximum packet size to a valid range. Cc: stable@vger.kernel.org Reported-by: Rene D Obermueller Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 3b1388fa2f36..0e2701649369 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1475,9 +1475,15 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Allow 3 retries for everything but isoc, set CErr = 3 */ if (!usb_endpoint_xfer_isoc(&ep->desc)) err_count = 3; - /* Some devices get this wrong */ - if (usb_endpoint_xfer_bulk(&ep->desc) && udev->speed == USB_SPEED_HIGH) - max_packet = 512; + /* HS bulk max packet should be 512, FS bulk supports 8, 16, 32 or 64 */ + if (usb_endpoint_xfer_bulk(&ep->desc)) { + if (udev->speed == USB_SPEED_HIGH) + max_packet = 512; + if (udev->speed == USB_SPEED_FULL) { + max_packet = rounddown_pow_of_two(max_packet); + max_packet = clamp_val(max_packet, 8, 64); + } + } /* xHCI 1.0 and 1.1 indicates that ctrl ep avg TRB Length should be 8 */ if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100) avg_trb_len = 8; -- cgit From fc57313d1017dd6b6f37a94e88daa8df54368ecc Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 10 Feb 2020 15:45:51 +0200 Subject: xhci: Fix memory leak when caching protocol extended capability PSI tables xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel Reported-by: Sajja Venkateswara Rao Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable # v4.4+ Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200210134553.9144-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 25 ++++++++++++------- drivers/usb/host/xhci-mem.c | 58 ++++++++++++++++++++++++++++----------------- drivers/usb/host/xhci.h | 14 ++++++++--- 3 files changed, 64 insertions(+), 33 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 7a3a29e5e9d2..af92b2576fe9 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -55,6 +55,7 @@ static u8 usb_bos_descriptor [] = { static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, u16 wLength) { + struct xhci_port_cap *port_cap = NULL; int i, ssa_count; u32 temp; u16 desc_size, ssp_cap_size, ssa_size = 0; @@ -64,16 +65,24 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, ssp_cap_size = sizeof(usb_bos_descriptor) - desc_size; /* does xhci support USB 3.1 Enhanced SuperSpeed */ - if (xhci->usb3_rhub.min_rev >= 0x01) { + for (i = 0; i < xhci->num_port_caps; i++) { + if (xhci->port_caps[i].maj_rev == 0x03 && + xhci->port_caps[i].min_rev >= 0x01) { + usb3_1 = true; + port_cap = &xhci->port_caps[i]; + break; + } + } + + if (usb3_1) { /* does xhci provide a PSI table for SSA speed attributes? */ - if (xhci->usb3_rhub.psi_count) { + if (port_cap->psi_count) { /* two SSA entries for each unique PSI ID, RX and TX */ - ssa_count = xhci->usb3_rhub.psi_uid_count * 2; + ssa_count = port_cap->psi_uid_count * 2; ssa_size = ssa_count * sizeof(u32); ssp_cap_size -= 16; /* skip copying the default SSA */ } desc_size += ssp_cap_size; - usb3_1 = true; } memcpy(buf, &usb_bos_descriptor, min(desc_size, wLength)); @@ -99,7 +108,7 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, } /* If PSI table exists, add the custom speed attributes from it */ - if (usb3_1 && xhci->usb3_rhub.psi_count) { + if (usb3_1 && port_cap->psi_count) { u32 ssp_cap_base, bm_attrib, psi, psi_mant, psi_exp; int offset; @@ -111,7 +120,7 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, /* attribute count SSAC bits 4:0 and ID count SSIC bits 8:5 */ bm_attrib = (ssa_count - 1) & 0x1f; - bm_attrib |= (xhci->usb3_rhub.psi_uid_count - 1) << 5; + bm_attrib |= (port_cap->psi_uid_count - 1) << 5; put_unaligned_le32(bm_attrib, &buf[ssp_cap_base + 4]); if (wLength < desc_size + ssa_size) @@ -124,8 +133,8 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, * USB 3.1 requires two SSA entries (RX and TX) for every link */ offset = desc_size; - for (i = 0; i < xhci->usb3_rhub.psi_count; i++) { - psi = xhci->usb3_rhub.psi[i]; + for (i = 0; i < port_cap->psi_count; i++) { + psi = port_cap->psi[i]; psi &= ~USB_SSP_SUBLINK_SPEED_RSVD; psi_exp = XHCI_EXT_PORT_PSIE(psi); psi_mant = XHCI_EXT_PORT_PSIM(psi); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 0e2701649369..bd5b152df6c0 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1915,17 +1915,16 @@ no_bw: xhci->usb3_rhub.num_ports = 0; xhci->num_active_eps = 0; kfree(xhci->usb2_rhub.ports); - kfree(xhci->usb2_rhub.psi); kfree(xhci->usb3_rhub.ports); - kfree(xhci->usb3_rhub.psi); kfree(xhci->hw_ports); kfree(xhci->rh_bw); kfree(xhci->ext_caps); + for (i = 0; i < xhci->num_port_caps; i++) + kfree(xhci->port_caps[i].psi); + kfree(xhci->port_caps); xhci->usb2_rhub.ports = NULL; - xhci->usb2_rhub.psi = NULL; xhci->usb3_rhub.ports = NULL; - xhci->usb3_rhub.psi = NULL; xhci->hw_ports = NULL; xhci->rh_bw = NULL; xhci->ext_caps = NULL; @@ -2126,6 +2125,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, u8 major_revision, minor_revision; struct xhci_hub *rhub; struct device *dev = xhci_to_hcd(xhci)->self.sysdev; + struct xhci_port_cap *port_cap; temp = readl(addr); major_revision = XHCI_EXT_PORT_MAJOR(temp); @@ -2160,31 +2160,39 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, /* WTF? "Valid values are ‘1’ to MaxPorts" */ return; - rhub->psi_count = XHCI_EXT_PORT_PSIC(temp); - if (rhub->psi_count) { - rhub->psi = kcalloc_node(rhub->psi_count, sizeof(*rhub->psi), - GFP_KERNEL, dev_to_node(dev)); - if (!rhub->psi) - rhub->psi_count = 0; + port_cap = &xhci->port_caps[xhci->num_port_caps++]; + if (xhci->num_port_caps > max_caps) + return; + + port_cap->maj_rev = major_revision; + port_cap->min_rev = minor_revision; + port_cap->psi_count = XHCI_EXT_PORT_PSIC(temp); + + if (port_cap->psi_count) { + port_cap->psi = kcalloc_node(port_cap->psi_count, + sizeof(*port_cap->psi), + GFP_KERNEL, dev_to_node(dev)); + if (!port_cap->psi) + port_cap->psi_count = 0; - rhub->psi_uid_count++; - for (i = 0; i < rhub->psi_count; i++) { - rhub->psi[i] = readl(addr + 4 + i); + port_cap->psi_uid_count++; + for (i = 0; i < port_cap->psi_count; i++) { + port_cap->psi[i] = readl(addr + 4 + i); /* count unique ID values, two consecutive entries can * have the same ID if link is assymetric */ - if (i && (XHCI_EXT_PORT_PSIV(rhub->psi[i]) != - XHCI_EXT_PORT_PSIV(rhub->psi[i - 1]))) - rhub->psi_uid_count++; + if (i && (XHCI_EXT_PORT_PSIV(port_cap->psi[i]) != + XHCI_EXT_PORT_PSIV(port_cap->psi[i - 1]))) + port_cap->psi_uid_count++; xhci_dbg(xhci, "PSIV:%d PSIE:%d PLT:%d PFD:%d LP:%d PSIM:%d\n", - XHCI_EXT_PORT_PSIV(rhub->psi[i]), - XHCI_EXT_PORT_PSIE(rhub->psi[i]), - XHCI_EXT_PORT_PLT(rhub->psi[i]), - XHCI_EXT_PORT_PFD(rhub->psi[i]), - XHCI_EXT_PORT_LP(rhub->psi[i]), - XHCI_EXT_PORT_PSIM(rhub->psi[i])); + XHCI_EXT_PORT_PSIV(port_cap->psi[i]), + XHCI_EXT_PORT_PSIE(port_cap->psi[i]), + XHCI_EXT_PORT_PLT(port_cap->psi[i]), + XHCI_EXT_PORT_PFD(port_cap->psi[i]), + XHCI_EXT_PORT_LP(port_cap->psi[i]), + XHCI_EXT_PORT_PSIM(port_cap->psi[i])); } } /* cache usb2 port capabilities */ @@ -2219,6 +2227,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, continue; } hw_port->rhub = rhub; + hw_port->port_cap = port_cap; rhub->num_ports++; } /* FIXME: Should we disable ports not in the Extended Capabilities? */ @@ -2309,6 +2318,11 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) if (!xhci->ext_caps) return -ENOMEM; + xhci->port_caps = kcalloc_node(cap_count, sizeof(*xhci->port_caps), + flags, dev_to_node(dev)); + if (!xhci->port_caps) + return -ENOMEM; + offset = cap_start; while (offset) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 13d8838cd552..3ecee10fdcdc 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1702,12 +1702,20 @@ struct xhci_bus_state { * Intel Lynx Point LP xHCI host. */ #define XHCI_MAX_REXIT_TIMEOUT_MS 20 +struct xhci_port_cap { + u32 *psi; /* array of protocol speed ID entries */ + u8 psi_count; + u8 psi_uid_count; + u8 maj_rev; + u8 min_rev; +}; struct xhci_port { __le32 __iomem *addr; int hw_portnum; int hcd_portnum; struct xhci_hub *rhub; + struct xhci_port_cap *port_cap; }; struct xhci_hub { @@ -1719,9 +1727,6 @@ struct xhci_hub { /* supported prococol extended capabiliy values */ u8 maj_rev; u8 min_rev; - u32 *psi; /* array of protocol speed ID entries */ - u8 psi_count; - u8 psi_uid_count; }; /* There is one xhci_hcd structure per controller */ @@ -1880,6 +1885,9 @@ struct xhci_hcd { /* cached usb2 extened protocol capabilites */ u32 *ext_caps; unsigned int num_ext_caps; + /* cached extended protocol port capabilities */ + struct xhci_port_cap *port_caps; + unsigned int num_port_caps; /* Compliance Mode Recovery Data */ struct timer_list comp_mode_recovery_timer; u32 port_status_u0; -- cgit From 024d411e9c5d49eb96c825af52a3ce2682895676 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 10 Feb 2020 15:45:52 +0200 Subject: xhci: fix runtime pm enabling for quirky Intel hosts Intel hosts that need the XHCI_PME_STUCK_QUIRK flag should enable runtime pm by calling xhci_pme_acpi_rtd3_enable() before usb_hcd_pci_probe() calls pci_dev_run_wake(). Otherwise usage count for the device won't be decreased, and runtime suspend is prevented. usb_hcd_pci_probe() only decreases the usage count if device can generate run-time wake-up events, i.e. when pci_dev_run_wake() returns true. This issue was exposed by pci_dev_run_wake() change in commit 8feaec33b986 ("PCI / PM: Always check PME wakeup capability for runtime wakeup support") and should be backported to kernels with that change Cc: # 4.13+ Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200210134553.9144-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 4917c5b033fa..da7c2db41671 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -302,6 +302,9 @@ static int xhci_pci_setup(struct usb_hcd *hcd) if (!usb_hcd_is_primary_hcd(hcd)) return 0; + if (xhci->quirks & XHCI_PME_STUCK_QUIRK) + xhci_pme_acpi_rtd3_enable(pdev); + xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); /* Find any debug ports */ @@ -359,9 +362,6 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) HCC_MAX_PSA(xhci->hcc_params) >= 4) xhci->shared_hcd->can_do_streams = 1; - if (xhci->quirks & XHCI_PME_STUCK_QUIRK) - xhci_pme_acpi_rtd3_enable(dev); - /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ pm_runtime_put_noidle(&dev->dev); -- cgit From a3ae87dce3a5abe0b57c811bab02b2564b574106 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Mon, 10 Feb 2020 15:45:53 +0200 Subject: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Comet Lake platforms Intel Comet Lake based platform require the XHCI_PME_STUCK_QUIRK quirk as well. Without this xHC can not enter D3 in runtime suspend. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200210134553.9144-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index da7c2db41671..5e9b537df631 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -49,6 +49,7 @@ #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0 #define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI 0x8a13 +#define PCI_DEVICE_ID_INTEL_CML_XHCI 0xa3af #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba @@ -187,7 +188,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && -- cgit From 67f68f977a12657028e866c013d43dd87320d210 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 12 Feb 2020 09:48:57 -0800 Subject: Revert "xhci: Fix memory leak when caching protocol extended capability PSI tables" This reverts commit fc57313d1017dd6b6f37a94e88daa8df54368ecc. Marek reports that it breaks things: This patch landed in today's linux-next (20200211) and causes NULL pointer dereference during second suspend/resume cycle on Samsung Exynos5422-based (arm 32bit) Odroid XU3lite board: A more complete fix will be added soon. Reported-by: Marek Szyprowski Fixes: fc57313d1017 ("xhci: Fix memory leak when caching protocol extended capability PSI tables") Cc: Paul Menzel Cc: Sajja Venkateswara Rao Cc: stable # v4.4+ Cc: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 25 +++++++------------ drivers/usb/host/xhci-mem.c | 58 +++++++++++++++++---------------------------- drivers/usb/host/xhci.h | 14 +++-------- 3 files changed, 33 insertions(+), 64 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index af92b2576fe9..7a3a29e5e9d2 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -55,7 +55,6 @@ static u8 usb_bos_descriptor [] = { static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, u16 wLength) { - struct xhci_port_cap *port_cap = NULL; int i, ssa_count; u32 temp; u16 desc_size, ssp_cap_size, ssa_size = 0; @@ -65,24 +64,16 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, ssp_cap_size = sizeof(usb_bos_descriptor) - desc_size; /* does xhci support USB 3.1 Enhanced SuperSpeed */ - for (i = 0; i < xhci->num_port_caps; i++) { - if (xhci->port_caps[i].maj_rev == 0x03 && - xhci->port_caps[i].min_rev >= 0x01) { - usb3_1 = true; - port_cap = &xhci->port_caps[i]; - break; - } - } - - if (usb3_1) { + if (xhci->usb3_rhub.min_rev >= 0x01) { /* does xhci provide a PSI table for SSA speed attributes? */ - if (port_cap->psi_count) { + if (xhci->usb3_rhub.psi_count) { /* two SSA entries for each unique PSI ID, RX and TX */ - ssa_count = port_cap->psi_uid_count * 2; + ssa_count = xhci->usb3_rhub.psi_uid_count * 2; ssa_size = ssa_count * sizeof(u32); ssp_cap_size -= 16; /* skip copying the default SSA */ } desc_size += ssp_cap_size; + usb3_1 = true; } memcpy(buf, &usb_bos_descriptor, min(desc_size, wLength)); @@ -108,7 +99,7 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, } /* If PSI table exists, add the custom speed attributes from it */ - if (usb3_1 && port_cap->psi_count) { + if (usb3_1 && xhci->usb3_rhub.psi_count) { u32 ssp_cap_base, bm_attrib, psi, psi_mant, psi_exp; int offset; @@ -120,7 +111,7 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, /* attribute count SSAC bits 4:0 and ID count SSIC bits 8:5 */ bm_attrib = (ssa_count - 1) & 0x1f; - bm_attrib |= (port_cap->psi_uid_count - 1) << 5; + bm_attrib |= (xhci->usb3_rhub.psi_uid_count - 1) << 5; put_unaligned_le32(bm_attrib, &buf[ssp_cap_base + 4]); if (wLength < desc_size + ssa_size) @@ -133,8 +124,8 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, * USB 3.1 requires two SSA entries (RX and TX) for every link */ offset = desc_size; - for (i = 0; i < port_cap->psi_count; i++) { - psi = port_cap->psi[i]; + for (i = 0; i < xhci->usb3_rhub.psi_count; i++) { + psi = xhci->usb3_rhub.psi[i]; psi &= ~USB_SSP_SUBLINK_SPEED_RSVD; psi_exp = XHCI_EXT_PORT_PSIE(psi); psi_mant = XHCI_EXT_PORT_PSIM(psi); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bd5b152df6c0..0e2701649369 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1915,16 +1915,17 @@ no_bw: xhci->usb3_rhub.num_ports = 0; xhci->num_active_eps = 0; kfree(xhci->usb2_rhub.ports); + kfree(xhci->usb2_rhub.psi); kfree(xhci->usb3_rhub.ports); + kfree(xhci->usb3_rhub.psi); kfree(xhci->hw_ports); kfree(xhci->rh_bw); kfree(xhci->ext_caps); - for (i = 0; i < xhci->num_port_caps; i++) - kfree(xhci->port_caps[i].psi); - kfree(xhci->port_caps); xhci->usb2_rhub.ports = NULL; + xhci->usb2_rhub.psi = NULL; xhci->usb3_rhub.ports = NULL; + xhci->usb3_rhub.psi = NULL; xhci->hw_ports = NULL; xhci->rh_bw = NULL; xhci->ext_caps = NULL; @@ -2125,7 +2126,6 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, u8 major_revision, minor_revision; struct xhci_hub *rhub; struct device *dev = xhci_to_hcd(xhci)->self.sysdev; - struct xhci_port_cap *port_cap; temp = readl(addr); major_revision = XHCI_EXT_PORT_MAJOR(temp); @@ -2160,39 +2160,31 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, /* WTF? "Valid values are ‘1’ to MaxPorts" */ return; - port_cap = &xhci->port_caps[xhci->num_port_caps++]; - if (xhci->num_port_caps > max_caps) - return; - - port_cap->maj_rev = major_revision; - port_cap->min_rev = minor_revision; - port_cap->psi_count = XHCI_EXT_PORT_PSIC(temp); - - if (port_cap->psi_count) { - port_cap->psi = kcalloc_node(port_cap->psi_count, - sizeof(*port_cap->psi), - GFP_KERNEL, dev_to_node(dev)); - if (!port_cap->psi) - port_cap->psi_count = 0; + rhub->psi_count = XHCI_EXT_PORT_PSIC(temp); + if (rhub->psi_count) { + rhub->psi = kcalloc_node(rhub->psi_count, sizeof(*rhub->psi), + GFP_KERNEL, dev_to_node(dev)); + if (!rhub->psi) + rhub->psi_count = 0; - port_cap->psi_uid_count++; - for (i = 0; i < port_cap->psi_count; i++) { - port_cap->psi[i] = readl(addr + 4 + i); + rhub->psi_uid_count++; + for (i = 0; i < rhub->psi_count; i++) { + rhub->psi[i] = readl(addr + 4 + i); /* count unique ID values, two consecutive entries can * have the same ID if link is assymetric */ - if (i && (XHCI_EXT_PORT_PSIV(port_cap->psi[i]) != - XHCI_EXT_PORT_PSIV(port_cap->psi[i - 1]))) - port_cap->psi_uid_count++; + if (i && (XHCI_EXT_PORT_PSIV(rhub->psi[i]) != + XHCI_EXT_PORT_PSIV(rhub->psi[i - 1]))) + rhub->psi_uid_count++; xhci_dbg(xhci, "PSIV:%d PSIE:%d PLT:%d PFD:%d LP:%d PSIM:%d\n", - XHCI_EXT_PORT_PSIV(port_cap->psi[i]), - XHCI_EXT_PORT_PSIE(port_cap->psi[i]), - XHCI_EXT_PORT_PLT(port_cap->psi[i]), - XHCI_EXT_PORT_PFD(port_cap->psi[i]), - XHCI_EXT_PORT_LP(port_cap->psi[i]), - XHCI_EXT_PORT_PSIM(port_cap->psi[i])); + XHCI_EXT_PORT_PSIV(rhub->psi[i]), + XHCI_EXT_PORT_PSIE(rhub->psi[i]), + XHCI_EXT_PORT_PLT(rhub->psi[i]), + XHCI_EXT_PORT_PFD(rhub->psi[i]), + XHCI_EXT_PORT_LP(rhub->psi[i]), + XHCI_EXT_PORT_PSIM(rhub->psi[i])); } } /* cache usb2 port capabilities */ @@ -2227,7 +2219,6 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, continue; } hw_port->rhub = rhub; - hw_port->port_cap = port_cap; rhub->num_ports++; } /* FIXME: Should we disable ports not in the Extended Capabilities? */ @@ -2318,11 +2309,6 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) if (!xhci->ext_caps) return -ENOMEM; - xhci->port_caps = kcalloc_node(cap_count, sizeof(*xhci->port_caps), - flags, dev_to_node(dev)); - if (!xhci->port_caps) - return -ENOMEM; - offset = cap_start; while (offset) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 3ecee10fdcdc..13d8838cd552 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1702,20 +1702,12 @@ struct xhci_bus_state { * Intel Lynx Point LP xHCI host. */ #define XHCI_MAX_REXIT_TIMEOUT_MS 20 -struct xhci_port_cap { - u32 *psi; /* array of protocol speed ID entries */ - u8 psi_count; - u8 psi_uid_count; - u8 maj_rev; - u8 min_rev; -}; struct xhci_port { __le32 __iomem *addr; int hw_portnum; int hcd_portnum; struct xhci_hub *rhub; - struct xhci_port_cap *port_cap; }; struct xhci_hub { @@ -1727,6 +1719,9 @@ struct xhci_hub { /* supported prococol extended capabiliy values */ u8 maj_rev; u8 min_rev; + u32 *psi; /* array of protocol speed ID entries */ + u8 psi_count; + u8 psi_uid_count; }; /* There is one xhci_hcd structure per controller */ @@ -1885,9 +1880,6 @@ struct xhci_hcd { /* cached usb2 extened protocol capabilites */ u32 *ext_caps; unsigned int num_ext_caps; - /* cached extended protocol port capabilities */ - struct xhci_port_cap *port_caps; - unsigned int num_port_caps; /* Compliance Mode Recovery Data */ struct timer_list comp_mode_recovery_timer; u32 port_status_u0; -- cgit From cf0ee7c60c89641f6e4d1d3c7867fe32b9e30300 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 11 Feb 2020 17:01:58 +0200 Subject: xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2 xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel Reported-by: Sajja Venkateswara Rao Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable # v4.4+ Signed-off-by: Mathias Nyman Tested-by: Marek Szyprowski Link: https://lore.kernel.org/r/20200211150158.14475-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-hub.c | 25 +++++++++++++------ drivers/usb/host/xhci-mem.c | 59 ++++++++++++++++++++++++++++----------------- drivers/usb/host/xhci.h | 14 ++++++++--- 3 files changed, 65 insertions(+), 33 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 7a3a29e5e9d2..af92b2576fe9 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -55,6 +55,7 @@ static u8 usb_bos_descriptor [] = { static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, u16 wLength) { + struct xhci_port_cap *port_cap = NULL; int i, ssa_count; u32 temp; u16 desc_size, ssp_cap_size, ssa_size = 0; @@ -64,16 +65,24 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, ssp_cap_size = sizeof(usb_bos_descriptor) - desc_size; /* does xhci support USB 3.1 Enhanced SuperSpeed */ - if (xhci->usb3_rhub.min_rev >= 0x01) { + for (i = 0; i < xhci->num_port_caps; i++) { + if (xhci->port_caps[i].maj_rev == 0x03 && + xhci->port_caps[i].min_rev >= 0x01) { + usb3_1 = true; + port_cap = &xhci->port_caps[i]; + break; + } + } + + if (usb3_1) { /* does xhci provide a PSI table for SSA speed attributes? */ - if (xhci->usb3_rhub.psi_count) { + if (port_cap->psi_count) { /* two SSA entries for each unique PSI ID, RX and TX */ - ssa_count = xhci->usb3_rhub.psi_uid_count * 2; + ssa_count = port_cap->psi_uid_count * 2; ssa_size = ssa_count * sizeof(u32); ssp_cap_size -= 16; /* skip copying the default SSA */ } desc_size += ssp_cap_size; - usb3_1 = true; } memcpy(buf, &usb_bos_descriptor, min(desc_size, wLength)); @@ -99,7 +108,7 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, } /* If PSI table exists, add the custom speed attributes from it */ - if (usb3_1 && xhci->usb3_rhub.psi_count) { + if (usb3_1 && port_cap->psi_count) { u32 ssp_cap_base, bm_attrib, psi, psi_mant, psi_exp; int offset; @@ -111,7 +120,7 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, /* attribute count SSAC bits 4:0 and ID count SSIC bits 8:5 */ bm_attrib = (ssa_count - 1) & 0x1f; - bm_attrib |= (xhci->usb3_rhub.psi_uid_count - 1) << 5; + bm_attrib |= (port_cap->psi_uid_count - 1) << 5; put_unaligned_le32(bm_attrib, &buf[ssp_cap_base + 4]); if (wLength < desc_size + ssa_size) @@ -124,8 +133,8 @@ static int xhci_create_usb3_bos_desc(struct xhci_hcd *xhci, char *buf, * USB 3.1 requires two SSA entries (RX and TX) for every link */ offset = desc_size; - for (i = 0; i < xhci->usb3_rhub.psi_count; i++) { - psi = xhci->usb3_rhub.psi[i]; + for (i = 0; i < port_cap->psi_count; i++) { + psi = port_cap->psi[i]; psi &= ~USB_SSP_SUBLINK_SPEED_RSVD; psi_exp = XHCI_EXT_PORT_PSIE(psi); psi_mant = XHCI_EXT_PORT_PSIM(psi); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 0e2701649369..884c601bfa15 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1915,17 +1915,17 @@ no_bw: xhci->usb3_rhub.num_ports = 0; xhci->num_active_eps = 0; kfree(xhci->usb2_rhub.ports); - kfree(xhci->usb2_rhub.psi); kfree(xhci->usb3_rhub.ports); - kfree(xhci->usb3_rhub.psi); kfree(xhci->hw_ports); kfree(xhci->rh_bw); kfree(xhci->ext_caps); + for (i = 0; i < xhci->num_port_caps; i++) + kfree(xhci->port_caps[i].psi); + kfree(xhci->port_caps); + xhci->num_port_caps = 0; xhci->usb2_rhub.ports = NULL; - xhci->usb2_rhub.psi = NULL; xhci->usb3_rhub.ports = NULL; - xhci->usb3_rhub.psi = NULL; xhci->hw_ports = NULL; xhci->rh_bw = NULL; xhci->ext_caps = NULL; @@ -2126,6 +2126,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, u8 major_revision, minor_revision; struct xhci_hub *rhub; struct device *dev = xhci_to_hcd(xhci)->self.sysdev; + struct xhci_port_cap *port_cap; temp = readl(addr); major_revision = XHCI_EXT_PORT_MAJOR(temp); @@ -2160,31 +2161,39 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, /* WTF? "Valid values are ‘1’ to MaxPorts" */ return; - rhub->psi_count = XHCI_EXT_PORT_PSIC(temp); - if (rhub->psi_count) { - rhub->psi = kcalloc_node(rhub->psi_count, sizeof(*rhub->psi), - GFP_KERNEL, dev_to_node(dev)); - if (!rhub->psi) - rhub->psi_count = 0; + port_cap = &xhci->port_caps[xhci->num_port_caps++]; + if (xhci->num_port_caps > max_caps) + return; + + port_cap->maj_rev = major_revision; + port_cap->min_rev = minor_revision; + port_cap->psi_count = XHCI_EXT_PORT_PSIC(temp); + + if (port_cap->psi_count) { + port_cap->psi = kcalloc_node(port_cap->psi_count, + sizeof(*port_cap->psi), + GFP_KERNEL, dev_to_node(dev)); + if (!port_cap->psi) + port_cap->psi_count = 0; - rhub->psi_uid_count++; - for (i = 0; i < rhub->psi_count; i++) { - rhub->psi[i] = readl(addr + 4 + i); + port_cap->psi_uid_count++; + for (i = 0; i < port_cap->psi_count; i++) { + port_cap->psi[i] = readl(addr + 4 + i); /* count unique ID values, two consecutive entries can * have the same ID if link is assymetric */ - if (i && (XHCI_EXT_PORT_PSIV(rhub->psi[i]) != - XHCI_EXT_PORT_PSIV(rhub->psi[i - 1]))) - rhub->psi_uid_count++; + if (i && (XHCI_EXT_PORT_PSIV(port_cap->psi[i]) != + XHCI_EXT_PORT_PSIV(port_cap->psi[i - 1]))) + port_cap->psi_uid_count++; xhci_dbg(xhci, "PSIV:%d PSIE:%d PLT:%d PFD:%d LP:%d PSIM:%d\n", - XHCI_EXT_PORT_PSIV(rhub->psi[i]), - XHCI_EXT_PORT_PSIE(rhub->psi[i]), - XHCI_EXT_PORT_PLT(rhub->psi[i]), - XHCI_EXT_PORT_PFD(rhub->psi[i]), - XHCI_EXT_PORT_LP(rhub->psi[i]), - XHCI_EXT_PORT_PSIM(rhub->psi[i])); + XHCI_EXT_PORT_PSIV(port_cap->psi[i]), + XHCI_EXT_PORT_PSIE(port_cap->psi[i]), + XHCI_EXT_PORT_PLT(port_cap->psi[i]), + XHCI_EXT_PORT_PFD(port_cap->psi[i]), + XHCI_EXT_PORT_LP(port_cap->psi[i]), + XHCI_EXT_PORT_PSIM(port_cap->psi[i])); } } /* cache usb2 port capabilities */ @@ -2219,6 +2228,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, continue; } hw_port->rhub = rhub; + hw_port->port_cap = port_cap; rhub->num_ports++; } /* FIXME: Should we disable ports not in the Extended Capabilities? */ @@ -2309,6 +2319,11 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) if (!xhci->ext_caps) return -ENOMEM; + xhci->port_caps = kcalloc_node(cap_count, sizeof(*xhci->port_caps), + flags, dev_to_node(dev)); + if (!xhci->port_caps) + return -ENOMEM; + offset = cap_start; while (offset) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 13d8838cd552..3ecee10fdcdc 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1702,12 +1702,20 @@ struct xhci_bus_state { * Intel Lynx Point LP xHCI host. */ #define XHCI_MAX_REXIT_TIMEOUT_MS 20 +struct xhci_port_cap { + u32 *psi; /* array of protocol speed ID entries */ + u8 psi_count; + u8 psi_uid_count; + u8 maj_rev; + u8 min_rev; +}; struct xhci_port { __le32 __iomem *addr; int hw_portnum; int hcd_portnum; struct xhci_hub *rhub; + struct xhci_port_cap *port_cap; }; struct xhci_hub { @@ -1719,9 +1727,6 @@ struct xhci_hub { /* supported prococol extended capabiliy values */ u8 maj_rev; u8 min_rev; - u32 *psi; /* array of protocol speed ID entries */ - u8 psi_count; - u8 psi_uid_count; }; /* There is one xhci_hcd structure per controller */ @@ -1880,6 +1885,9 @@ struct xhci_hcd { /* cached usb2 extened protocol capabilites */ u32 *ext_caps; unsigned int num_ext_caps; + /* cached extended protocol port capabilities */ + struct xhci_port_cap *port_caps; + unsigned int num_port_caps; /* Compliance Mode Recovery Data */ struct timer_list comp_mode_recovery_timer; u32 port_status_u0; -- cgit From 045706bff837ee89c13f1ace173db71922c1c40b Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (VMware)" Date: Fri, 6 Mar 2020 17:08:57 +0200 Subject: xhci: Do not open code __print_symbolic() in xhci trace events libtraceevent (used by perf and trace-cmd) failed to parse the xhci_urb_dequeue trace event. This is because the user space trace event format parsing is not a full C compiler. It can handle some basic logic, but is not meant to be able to handle everything C can do. In cases where a trace event field needs to be converted from a number to a string, there's the __print_symbolic() macro that should be used: See samples/trace_events/trace-events-sample.h Some xhci trace events open coded the __print_symbolic() causing the user spaces tools to fail to parse it. This has to be replaced with __print_symbolic() instead. CC: stable@vger.kernel.org Reported-by: Tzvetomir Stoyanov Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206531 Fixes: 5abdc2e6e12ff ("usb: host: xhci: add urb_enqueue/dequeue/giveback tracers") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200306150858.21904-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-trace.h | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 56eb867803a6..b19582b2a72c 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -289,23 +289,12 @@ DECLARE_EVENT_CLASS(xhci_log_urb, ), TP_printk("ep%d%s-%s: urb %p pipe %u slot %d length %d/%d sgs %d/%d stream %d flags %08x", __entry->epnum, __entry->dir_in ? "in" : "out", - ({ char *s; - switch (__entry->type) { - case USB_ENDPOINT_XFER_INT: - s = "intr"; - break; - case USB_ENDPOINT_XFER_CONTROL: - s = "control"; - break; - case USB_ENDPOINT_XFER_BULK: - s = "bulk"; - break; - case USB_ENDPOINT_XFER_ISOC: - s = "isoc"; - break; - default: - s = "UNKNOWN"; - } s; }), __entry->urb, __entry->pipe, __entry->slot_id, + __print_symbolic(__entry->type, + { USB_ENDPOINT_XFER_INT, "intr" }, + { USB_ENDPOINT_XFER_CONTROL, "control" }, + { USB_ENDPOINT_XFER_BULK, "bulk" }, + { USB_ENDPOINT_XFER_ISOC, "isoc" }), + __entry->urb, __entry->pipe, __entry->slot_id, __entry->actual, __entry->length, __entry->num_mapped_sgs, __entry->num_sgs, __entry->stream, __entry->flags ) -- cgit From 16263abc12d09871156a1c8650fb651f0e552f5e Mon Sep 17 00:00:00 2001 From: Alberto Mattea Date: Fri, 6 Mar 2020 17:08:58 +0200 Subject: usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c This controller timeouts during suspend (S3) with [ 240.521724] xhci_hcd 0000:30:00.3: WARN: xHC save state timeout [ 240.521729] xhci_hcd 0000:30:00.3: ERROR mismatched command completion event thus preventing the system from entering S3. Moreover it remains in an undefined state where some connected devices stop working until a reboot. Apply the XHCI_SUSPEND_DELAY quirk to make it suspend properly. CC: stable@vger.kernel.org Signed-off-by: Alberto Mattea Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200306150858.21904-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 5e9b537df631..1fddc41fa1f3 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -136,7 +136,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_AMD_PLL_FIX; if (pdev->vendor == PCI_VENDOR_ID_AMD && - (pdev->device == 0x15e0 || + (pdev->device == 0x145c || + pdev->device == 0x15e0 || pdev->device == 0x15e1 || pdev->device == 0x43bb)) xhci->quirks |= XHCI_SUSPEND_DELAY; -- cgit From b433e340e7565110b0ce9ca4b3e26f4b97a1decf Mon Sep 17 00:00:00 2001 From: Ran Wang Date: Fri, 6 Mar 2020 17:23:28 +0800 Subject: usb: host: xhci-plat: add a shutdown When loading new kernel via kexec, we need to shutdown host controller to avoid any un-expected memory accessing during new kernel boot. Signed-off-by: Ran Wang Cc: stable Tested-by: Stephen Boyd Reviewed-by: Peter Chen Link: https://lore.kernel.org/r/20200306092328.41253-1-ran.wang_1@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-plat.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index d90cd5ec09cf..315b4552693c 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -445,6 +445,7 @@ MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match); static struct platform_driver usb_xhci_driver = { .probe = xhci_plat_probe, .remove = xhci_plat_remove, + .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "xhci-hcd", .pm = &xhci_plat_pm_ops, -- cgit