From f0e4cba2534cd88476dff920727c81350130f3c5 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Tue, 29 Jul 2014 14:14:55 +0200
Subject: USB: option: reduce interrupt-urb logging verbosity

Do not log normal interrupt-urb shutdowns as errors.

The option driver has always been logging any nonzero interrupt-urb
status as an error, including when the urb is killed during normal
operation.

Commit 9096f1fbba91 ("USB: usb_wwan: fix potential NULL-deref at
resume") moved the interrupt urb submission from port probe and release
to open and close, thus potentially increasing the number of these
false-positive error messages dramatically.

Reported-by: Ed Butler <ressy66@ausics.net>
Tested-by: Ed Butler <ressy66@ausics.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a9688940543d..34f142be5b83 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1916,6 +1916,8 @@ static void option_instat_callback(struct urb *urb)
 			dev_dbg(dev, "%s: type %x req %x\n", __func__,
 				req_pkt->bRequestType, req_pkt->bRequest);
 		}
+	} else if (status == -ENOENT || status == -ESHUTDOWN) {
+		dev_dbg(dev, "%s: urb stopped: %d\n", __func__, status);
 	} else
 		dev_err(dev, "%s: error %d\n", __func__, status);
 
-- 
cgit 


From d77302739d900bbca5e901a3b7ac48c907ee6c93 Mon Sep 17 00:00:00 2001
From: Brennan Ashton <bashton@brennanashton.com>
Date: Wed, 6 Aug 2014 08:46:44 -0700
Subject: USB: option: add VIA Telecom CDS7 chipset device id

This VIA Telecom baseband processor is used is used by by u-blox in both the
FW2770 and FW2760 products and may be used in others as well.

This patch has been tested on both of these modem versions.

Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/option.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 34f142be5b83..408aad1b1c98 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -494,6 +494,10 @@ static void option_instat_callback(struct urb *urb);
 #define INOVIA_VENDOR_ID			0x20a6
 #define INOVIA_SEW858				0x1105
 
+/* VIA Telecom */
+#define VIATELECOM_VENDOR_ID			0x15eb
+#define VIATELECOM_PRODUCT_CDS7			0x0001
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -1724,6 +1728,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
 	{ USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) },
+	{ USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
-- 
cgit 


From 63a901c06e3c2c45bd601916fe04e870e9ccae1e Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Thu, 7 Aug 2014 16:00:13 +0200
Subject: Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"

This reverts commit 73228a0538a7 ("USB: option,zte_ev: move most ZTE
CDMA devices to zte_ev").

Move the IDs of the devices that were previously driven by the option
driver back to that driver.

As several users have reported, the zte_ev driver is causing random
disconnects as well as reconnect failures.

A closer analysis of the zte_ev setup code reveals that it consists of
standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE)
but unfortunately fails to get some of those right. In particular, as
reported by Liu Lei, it fails to lower DTR/RTS on close. It also appears
that the control requests lack the interface argument.

Note that the zte_ev driver is based on code (once) distributed by ZTE
that still appears to originally have been reverse-engineered and bolted
onto the generic driver.

Since line control is already handled properly by the option driver, and
the SET/GET_LINE_CODING requests appears to be redundant (amounts to a
SET 9600 8N1), this is a first step in ultimately removing the redundant
zte_ev driver.

Note that AC2726 had already been moved back to option, and that some
IDs were in the device table of both drivers prior to the commit being
reverted.

Reported-by: Lei Liu <liu.lei78@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/option.c | 24 +++++++++++++++++++++---
 drivers/usb/serial/zte_ev.c | 18 ------------------
 2 files changed, 21 insertions(+), 21 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 408aad1b1c98..54a8120897a6 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -275,8 +275,12 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_MF622			0x0001
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
-#define ZTE_PRODUCT_MC2718			0xffe8
 #define ZTE_PRODUCT_AC2726			0xfff1
+#define ZTE_PRODUCT_CDMA_TECH			0xfffe
+#define ZTE_PRODUCT_AC8710T			0xffff
+#define ZTE_PRODUCT_MC2718			0xffe8
+#define ZTE_PRODUCT_AD3812			0xffeb
+#define ZTE_PRODUCT_MC2716			0xffed
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -531,10 +535,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
 	.reserved = BIT(4),
 };
 
+static const struct option_blacklist_info zte_ad3812_z_blacklist = {
+	.sendsetup = BIT(0) | BIT(1) | BIT(2),
+};
+
 static const struct option_blacklist_info zte_mc2718_z_blacklist = {
 	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
 };
 
+static const struct option_blacklist_info zte_mc2716_z_blacklist = {
+	.sendsetup = BIT(1) | BIT(2) | BIT(3),
+};
+
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
@@ -1074,6 +1086,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
+	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
@@ -1548,13 +1561,18 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
 
-	/* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
 	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index e40ab739c4a6..4ecff9cba286 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -272,27 +272,9 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 }
 
 static const struct usb_device_id id_table[] = {
-	/* AC8710, AC8710T */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
-	 /* AC8700 */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
 	/* MG880 */
 	{ USB_DEVICE(0x19d2, 0xfffd) },
-	{ USB_DEVICE(0x19d2, 0xfffc) },
-	{ USB_DEVICE(0x19d2, 0xfffb) },
-	/* AC8710_V3 */
-	{ USB_DEVICE(0x19d2, 0xfff6) },
-	{ USB_DEVICE(0x19d2, 0xfff7) },
-	{ USB_DEVICE(0x19d2, 0xfff8) },
-	{ USB_DEVICE(0x19d2, 0xfff9) },
-	{ USB_DEVICE(0x19d2, 0xffee) },
-	/* AC2716, MC2716 */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
-	/* AD3812 */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE(0x19d2, 0xffec) },
 	{ USB_DEVICE(0x05C6, 0x3197) },
-	{ USB_DEVICE(0x05C6, 0x6000) },
 	{ USB_DEVICE(0x05C6, 0x9008) },
 	{ },
 };
-- 
cgit 


From 95be5739588c56a9327e477aa0ba3c81c5cf8631 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Thu, 7 Aug 2014 16:00:14 +0200
Subject: USB: zte_ev: remove duplicate Gobi PID

Remove dublicate Gobi PID 0x9008 which is already handled by the
qcserial driver since commit f05932c0caf4 ("USB: qcserial: Add extra
device IDs").

Fixes: 799ee9243d89 ("USB: serial: add zte_ev.c driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/zte_ev.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index 4ecff9cba286..960f70edcfd7 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -275,7 +275,6 @@ static const struct usb_device_id id_table[] = {
 	/* MG880 */
 	{ USB_DEVICE(0x19d2, 0xfffd) },
 	{ USB_DEVICE(0x05C6, 0x3197) },
-	{ USB_DEVICE(0x05C6, 0x9008) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
-- 
cgit 


From 754eb21c0bbbbc4b8830a9a864b286323b84225f Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Thu, 7 Aug 2014 16:00:15 +0200
Subject: USB: zte_ev: remove duplicate Qualcom PID

Remove dublicate Qualcom PID 0x3197 which is already handled by the
moto-modem driver since commit 6986a978eec7 ("USB: add new moto_modem
driver for some Morotola phones").

Fixes: 799ee9243d89 ("USB: serial: add zte_ev.c driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/zte_ev.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index 960f70edcfd7..1a132e9e947a 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -274,7 +274,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 static const struct usb_device_id id_table[] = {
 	/* MG880 */
 	{ USB_DEVICE(0x19d2, 0xfffd) },
-	{ USB_DEVICE(0x05C6, 0x3197) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
-- 
cgit 


From 6552cc7f09261db2aeaae389aa2c05a74b3a93b4 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Wed, 13 Aug 2014 17:56:52 +0200
Subject: USB: ftdi_sio: add Basic Micro ATOM Nano USB2Serial PID

Add device id for Basic Micro ATOM Nano USB2Serial adapters.

Reported-by: Nicolas Alt <n.alt@mytum.de>
Tested-by: Nicolas Alt <n.alt@mytum.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/ftdi_sio.c     | 1 +
 drivers/usb/serial/ftdi_sio_ids.h | 2 ++
 2 files changed, 3 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 216ce3078270..93e088ed4306 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -146,6 +146,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_BM_ATOM_NANO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 1e58d90a0b6c..3168a0191973 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -42,6 +42,8 @@
 /* www.candapter.com Ewert Energy Systems CANdapter device */
 #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
 
+#define FTDI_BM_ATOM_NANO_PID	0xa559	/* Basic Micro ATOM Nano USB2Serial */
+
 /*
  * Texas Instruments XDS100v2 JTAG / BeagleBone A3
  * http://processors.wiki.ti.com/index.php/XDS100
-- 
cgit 


From 91fcb1ce420e0a5f8d92d556d7008a78bc6ce1eb Mon Sep 17 00:00:00 2001
From: Greg KH <gregkh@linuxfoundation.org>
Date: Fri, 15 Aug 2014 15:22:21 +0800
Subject: USB: serial: pl2303: add device id for ztek device

This adds a new device id to the pl2303 driver for the ZTEK device.

Reported-by: Mike Chu <Mike-Chu@prolific.com.tw>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/pl2303.c | 1 +
 drivers/usb/serial/pl2303.h | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index b3d5a35c0d4b..e9bad928039f 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -45,6 +45,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 42bc082896ac..71fd9da1d6e7 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -22,6 +22,7 @@
 #define PL2303_PRODUCT_ID_GPRS		0x0609
 #define PL2303_PRODUCT_ID_HCR331	0x331a
 #define PL2303_PRODUCT_ID_MOTOROLA	0x0307
+#define PL2303_PRODUCT_ID_ZTEK		0xe1f1
 
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
-- 
cgit 


From 646907f5bfb0782c731ae9ff6fb63471a3566132 Mon Sep 17 00:00:00 2001
From: Jaša Bartelj <jasa.bartelj@gmail.com>
Date: Sat, 16 Aug 2014 12:44:27 +0200
Subject: USB: ftdi_sio: Added PID for new ekey device
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Added support to the ftdi_sio driver for ekey Converter USB which
uses an FT232BM chip.

Signed-off-by: Jaša Bartelj <jasa.bartelj@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/ftdi_sio.c     | 2 ++
 drivers/usb/serial/ftdi_sio_ids.h | 5 +++++
 2 files changed, 7 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 93e088ed4306..824ea5e7ec8b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -935,6 +935,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) },
 	{ USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) },
+	/* ekey Devices */
+	{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
 	/* Infineon Devices */
 	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
 	{ }					/* Terminating entry */
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 3168a0191973..70b0b1d88ae9 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1380,3 +1380,8 @@
 #define BRAINBOXES_US_160_6_PID		0x9006 /* US-160 16xRS232 1Mbaud Port 11 and 12 */
 #define BRAINBOXES_US_160_7_PID		0x9007 /* US-160 16xRS232 1Mbaud Port 13 and 14 */
 #define BRAINBOXES_US_160_8_PID		0x9008 /* US-160 16xRS232 1Mbaud Port 15 and 16 */
+
+/*
+ * ekey biometric systems GmbH (http://ekey.net/)
+ */
+#define FTDI_EKEY_CONV_USB_PID		0xCB08	/* Converter USB */
-- 
cgit 


From 6817ae225cd650fb1c3295d769298c38b1eba818 Mon Sep 17 00:00:00 2001
From: James Forshaw <forshaw@google.com>
Date: Sat, 23 Aug 2014 14:39:48 -0700
Subject: USB: whiteheat: Added bounds checking for bulk command response

This patch fixes a potential security issue in the whiteheat USB driver
which might allow a local attacker to cause kernel memory corrpution. This
is due to an unchecked memcpy into a fixed size buffer (of 64 bytes). On
EHCI and XHCI busses it's possible to craft responses greater than 64
bytes leading a buffer overflow.

Signed-off-by: James Forshaw <forshaw@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/whiteheat.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index e62f2dff8b7d..6c3734d2b45a 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -514,6 +514,10 @@ static void command_port_read_callback(struct urb *urb)
 		dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__);
 		return;
 	}
+	if (!urb->actual_length) {
+		dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__);
+		return;
+	}
 	if (status) {
 		dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status);
 		if (status != -ENOENT)
@@ -534,7 +538,8 @@ static void command_port_read_callback(struct urb *urb)
 		/* These are unsolicited reports from the firmware, hence no
 		   waiting command to wakeup */
 		dev_dbg(&urb->dev->dev, "%s - event received\n", __func__);
-	} else if (data[0] == WHITEHEAT_GET_DTR_RTS) {
+	} else if ((data[0] == WHITEHEAT_GET_DTR_RTS) &&
+		(urb->actual_length - 1 <= sizeof(command_info->result_buffer))) {
 		memcpy(command_info->result_buffer, &data[1],
 						urb->actual_length - 1);
 		command_info->command_finished = WHITEHEAT_CMD_COMPLETE;
-- 
cgit 


From d979e9f9ecab04c1ecca741370e30a8a498893f5 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Wed, 27 Aug 2014 11:55:18 +0200
Subject: USB: serial: fix potential stack buffer overflow

Make sure to verify the maximum number of endpoints per type to avoid
writing beyond the end of a stack-allocated array.

The current usb-serial implementation is limited to eight ports per
interface but failed to verify that the number of endpoints of a certain
type reported by a device did not exceed this limit.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/usb-serial.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 02de3110fe94..eb0e8c6a8682 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -764,29 +764,39 @@ static int usb_serial_probe(struct usb_interface *interface,
 		if (usb_endpoint_is_bulk_in(endpoint)) {
 			/* we found a bulk in endpoint */
 			dev_dbg(ddev, "found bulk in on endpoint %d\n", i);
-			bulk_in_endpoint[num_bulk_in] = endpoint;
-			++num_bulk_in;
+			if (num_bulk_in < MAX_NUM_PORTS) {
+				bulk_in_endpoint[num_bulk_in] = endpoint;
+				++num_bulk_in;
+			}
 		}
 
 		if (usb_endpoint_is_bulk_out(endpoint)) {
 			/* we found a bulk out endpoint */
 			dev_dbg(ddev, "found bulk out on endpoint %d\n", i);
-			bulk_out_endpoint[num_bulk_out] = endpoint;
-			++num_bulk_out;
+			if (num_bulk_out < MAX_NUM_PORTS) {
+				bulk_out_endpoint[num_bulk_out] = endpoint;
+				++num_bulk_out;
+			}
 		}
 
 		if (usb_endpoint_is_int_in(endpoint)) {
 			/* we found a interrupt in endpoint */
 			dev_dbg(ddev, "found interrupt in on endpoint %d\n", i);
-			interrupt_in_endpoint[num_interrupt_in] = endpoint;
-			++num_interrupt_in;
+			if (num_interrupt_in < MAX_NUM_PORTS) {
+				interrupt_in_endpoint[num_interrupt_in] =
+						endpoint;
+				++num_interrupt_in;
+			}
 		}
 
 		if (usb_endpoint_is_int_out(endpoint)) {
 			/* we found an interrupt out endpoint */
 			dev_dbg(ddev, "found interrupt out on endpoint %d\n", i);
-			interrupt_out_endpoint[num_interrupt_out] = endpoint;
-			++num_interrupt_out;
+			if (num_interrupt_out < MAX_NUM_PORTS) {
+				interrupt_out_endpoint[num_interrupt_out] =
+						endpoint;
+				++num_interrupt_out;
+			}
 		}
 	}
 
@@ -809,8 +819,10 @@ static int usb_serial_probe(struct usb_interface *interface,
 				if (usb_endpoint_is_int_in(endpoint)) {
 					/* we found a interrupt in endpoint */
 					dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
-					interrupt_in_endpoint[num_interrupt_in] = endpoint;
-					++num_interrupt_in;
+					if (num_interrupt_in < MAX_NUM_PORTS) {
+						interrupt_in_endpoint[num_interrupt_in] = endpoint;
+						++num_interrupt_in;
+					}
 				}
 			}
 		}
-- 
cgit 


From 5654699fb38512bdbfc0f892ce54fce75bdc2bab Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Wed, 27 Aug 2014 11:55:19 +0200
Subject: USB: serial: fix potential heap buffer overflow

Make sure to verify the number of ports requested by subdriver to avoid
writing beyond the end of fixed-size array in interface data.

The current usb-serial implementation is limited to eight ports per
interface but failed to verify that the number of ports requested by a
subdriver (which could have been determined from device descriptors) did
not exceed this limit.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/usb-serial.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index eb0e8c6a8682..475723c006f9 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -862,6 +862,11 @@ static int usb_serial_probe(struct usb_interface *interface,
 			num_ports = type->num_ports;
 	}
 
+	if (num_ports > MAX_NUM_PORTS) {
+		dev_warn(ddev, "too many ports requested: %d\n", num_ports);
+		num_ports = MAX_NUM_PORTS;
+	}
+
 	serial->num_ports = num_ports;
 	serial->num_bulk_in = num_bulk_in;
 	serial->num_bulk_out = num_bulk_out;
-- 
cgit 


From 4df0ea41af9dce89daa9f1cb968884b346d168c9 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Thu, 28 Aug 2014 12:28:15 +0200
Subject: USB: zte_ev: fix removed PIDs

Add back some PIDs that were mistakingly remove when reverting commit
73228a0538a7 ("USB: option,zte_ev: move most ZTE CDMA devices to
zte_ev"), which apparently did more than its commit message claimed in
that it not only moved some PIDs from option to zte_ev but also added
some new ones.

Fixes: 63a901c06e3c ("Revert "USB: option,zte_ev: move most ZTE CDMA
devices to zte_ev"")

Reported-by: Lei Liu <lei35151@163.com>
Cc: stable <stable@vger.kernel.org>
---
 drivers/usb/serial/zte_ev.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
index 1a132e9e947a..c9bb107d5e5c 100644
--- a/drivers/usb/serial/zte_ev.c
+++ b/drivers/usb/serial/zte_ev.c
@@ -272,6 +272,14 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 }
 
 static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(0x19d2, 0xffec) },
+	{ USB_DEVICE(0x19d2, 0xffee) },
+	{ USB_DEVICE(0x19d2, 0xfff6) },
+	{ USB_DEVICE(0x19d2, 0xfff7) },
+	{ USB_DEVICE(0x19d2, 0xfff8) },
+	{ USB_DEVICE(0x19d2, 0xfff9) },
+	{ USB_DEVICE(0x19d2, 0xfffb) },
+	{ USB_DEVICE(0x19d2, 0xfffc) },
 	/* MG880 */
 	{ USB_DEVICE(0x19d2, 0xfffd) },
 	{ },
-- 
cgit 


From ee444609dbae8afee420c3243ce4c5f442efb622 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Mon, 18 Aug 2014 18:33:11 +0200
Subject: USB: ftdi_sio: add support for NOVITUS Bono E thermal printer

Add device id for NOVITUS Bono E thermal printer.

Reported-by: Emanuel Koczwara <poczta@emanuelkoczwara.pl>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/ftdi_sio.c     | 1 +
 drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
 2 files changed, 7 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 824ea5e7ec8b..ef86fce6e50b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -728,6 +728,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
+	{ USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 70b0b1d88ae9..8927a5c39b00 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -836,6 +836,12 @@
 #define TELLDUS_VID			0x1781	/* Vendor ID */
 #define TELLDUS_TELLSTICK_PID		0x0C30	/* RF control dongle 433 MHz using FT232RL */
 
+/*
+ * NOVITUS printers
+ */
+#define NOVITUS_VID			0x1a28
+#define NOVITUS_BONO_E_PID		0x6010
+
 /*
  * RT Systems programming cables for various ham radios
  */
-- 
cgit 


From 049255f51644c1105775af228396d187402a5934 Mon Sep 17 00:00:00 2001
From: Bjørn Mork <bjorn@mork.no>
Date: Thu, 28 Aug 2014 14:11:23 +0200
Subject: USB: sierra: avoid CDC class functions on "68A3" devices
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Sierra Wireless Direct IP devices using the 68A3 product ID
can be configured for modes including a CDC ECM class function.
The known example uses interface numbers 12 and 13 for the ECM
control and data interfaces respectively, consistent with CDC
MBIM function interface numbering on other Sierra devices.

It seems cleaner to restrict this driver to the ff/ff/ff
vendor specific interfaces rather than increasing the already
long interface number blacklist.  This should be more future
proof if Sierra adds more class functions using interface
numbers not yet in the blacklist.

Cc: <stable@vger.kernel.org>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/sierra.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 6f7f01eb556a..fa45d39619ca 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -282,14 +282,16 @@ static const struct usb_device_id id_table[] = {
 	/* Sierra Wireless HSPA Non-Composite Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
 	{ USB_DEVICE(0x1199, 0x6893) },	/* Sierra Wireless Device */
-	{ USB_DEVICE(0x1199, 0x68A3), 	/* Sierra Wireless Direct IP modems */
+	/* Sierra Wireless Direct IP modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF),
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
 	/* AT&T Direct IP LTE modems */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
-	{ USB_DEVICE(0x0f3d, 0x68A3), 	/* Airprime/Sierra Wireless Direct IP modems */
+	/* Airprime/Sierra Wireless Direct IP modems */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68A3, 0xFF, 0xFF, 0xFF),
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
 
-- 
cgit 


From 5b3da69285c143b7ea76b3b9f73099ff1093ab73 Mon Sep 17 00:00:00 2001
From: Bjørn Mork <bjorn@mork.no>
Date: Thu, 28 Aug 2014 15:08:16 +0200
Subject: USB: sierra: add 1199:68AA device ID
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This VID:PID is used for some Direct IP devices behaving
identical to the already supported 0F3D:68AA devices.

Cc: <stable@vger.kernel.org>
Reported-by: Lars Melin <larsm17@gmail.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/sierra.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index fa45d39619ca..46179a0828eb 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -286,6 +286,9 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF),
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
 	},
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF),
+	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
+	},
 	/* AT&T Direct IP LTE modems */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF),
 	  .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
-- 
cgit 


From 399aa9a75ad372b301e5050f3653a297a767fdc4 Mon Sep 17 00:00:00 2001
From: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Date: Wed, 13 Aug 2014 15:02:53 +0300
Subject: USB: pl2303: use divisors for unsupported baud rates

Use direct method for supported baud rates, otherwise use divisors.
Limit baud rate to 12 Mbaud with HX type.

This change has been tested to work with PL-2303HX at 115200, 500000,
1000000, 2000000, 2500000, 3000000 and 4000000 baud rates.

Signed-off-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/pl2303.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index e9bad928039f..0f872e6b2c87 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -162,6 +162,9 @@ static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
 		.max_baud_rate =	1228800,
 		.quirks =		PL2303_QUIRK_LEGACY,
 	},
+	[TYPE_HX] = {
+		.max_baud_rate =	12000000,
+	},
 };
 
 static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
@@ -395,16 +398,14 @@ static void pl2303_encode_baud_rate(struct tty_struct *tty,
 	if (spriv->type->max_baud_rate)
 		baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
 	/*
-	 * Set baud rate to nearest supported value.
-	 *
-	 * NOTE: Baud rate 500k can only be set using divisors.
+	 * Use direct method for supported baud rates, otherwise use divisors.
 	 */
 	baud_sup = pl2303_get_supported_baud_rate(baud);
 
-	if (baud == 500000)
-		baud = pl2303_encode_baud_rate_divisor(buf, baud);
+	if (baud == baud_sup)
+		baud = pl2303_encode_baud_rate_direct(buf, baud);
 	else
-		baud = pl2303_encode_baud_rate_direct(buf, baud_sup);
+		baud = pl2303_encode_baud_rate_divisor(buf, baud);
 
 	/* Save resulting baud rate */
 	tty_encode_baud_rate(tty, baud, baud);
-- 
cgit 


From b9f040389e23fb95fde36cb0a3c2c516fb3e9d1c Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Mon, 18 Aug 2014 18:14:52 +0200
Subject: USB: serial: add support for multi-port simple drivers

Add support for multi-port simple drivers.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/usb-serial-simple.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index fb79775447b0..02cb77a1e79d 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -20,7 +20,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-#define DEVICE(vendor, IDS)					\
+#define DEVICE_N(vendor, IDS, nport)				\
 static const struct usb_device_id vendor##_id_table[] = {	\
 	IDS(),							\
 	{ },							\
@@ -31,9 +31,10 @@ static struct usb_serial_driver vendor##_device = {		\
 		.name =		#vendor,			\
 	},							\
 	.id_table =		vendor##_id_table,		\
-	.num_ports =		1,				\
+	.num_ports =		nport,				\
 };
 
+#define DEVICE(vendor, IDS)	DEVICE_N(vendor, IDS, 1)
 
 /* ZIO Motherboard USB driver */
 #define ZIO_IDS()			\
-- 
cgit 


From c5cd24d7b179a415df263e5b18b72f6e3aaf81e0 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Mon, 18 Aug 2014 18:14:53 +0200
Subject: USB: serial: add Novatel Wireless GPS driver

Add simple driver for Novatel Wireless GPS receivers.

Reported-by: Kirk Madsen <kirkm@Navsys.com>
Tested-by: Kirk Madsen <kirkm@Navsys.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/Kconfig             | 1 +
 drivers/usb/serial/usb-serial-simple.c | 7 +++++++
 2 files changed, 8 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 3ce5c74b29e4..ab05158ad03e 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -61,6 +61,7 @@ config USB_SERIAL_SIMPLE
 		- Fundamental Software dongle.
 		- HP4x calculators
 		- a number of Motorola phones
+		- Novatel Wireless GPS receivers
 		- Siemens USB/MPI adapter.
 		- ViVOtech ViVOpay USB device.
 		- Infineon Modem Flashloader USB interface
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index 02cb77a1e79d..5565308c870c 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -65,6 +65,11 @@ DEVICE(vivopay, VIVOPAY_IDS);
 	{ USB_DEVICE(0x22b8, 0x2c64) }	/* Motorola V950 phone */
 DEVICE(moto_modem, MOTO_IDS);
 
+/* Novatel Wireless GPS driver */
+#define NOVATEL_IDS()			\
+	{ USB_DEVICE(0x09d7, 0x0100) }	/* NovAtel FlexPack GPS */
+DEVICE_N(novatel_gps, NOVATEL_IDS, 3);
+
 /* HP4x (48/49) Generic Serial driver */
 #define HP4X_IDS()			\
 	{ USB_DEVICE(0x03f0, 0x0121) }
@@ -88,6 +93,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&flashloader_device,
 	&vivopay_device,
 	&moto_modem_device,
+	&novatel_gps_device,
 	&hp4x_device,
 	&suunto_device,
 	&siemens_mpi_device,
@@ -100,6 +106,7 @@ static const struct usb_device_id id_table[] = {
 	FLASHLOADER_IDS(),
 	VIVOPAY_IDS(),
 	MOTO_IDS(),
+	NOVATEL_IDS(),
 	HP4X_IDS(),
 	SUUNTO_IDS(),
 	SIEMENS_IDS(),
-- 
cgit 


From cff9c2339a6d5105d7f6b1f9a96dd1d239cc76ac Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Mon, 18 Aug 2014 18:23:19 +0200
Subject: USB: serial: add Medtronic CareLink USB driver

Add simple driver for Medtronic CareLink USB devices.

Reported-by: Benjamin West <bewest@gmail.com>
Tested-by: Benjamin West <bewest@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/Kconfig             | 1 +
 drivers/usb/serial/usb-serial-simple.c | 7 +++++++
 2 files changed, 8 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index ab05158ad03e..c3119eb251bc 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -58,6 +58,7 @@ config USB_SERIAL_SIMPLE
 	  handles a wide range of very simple devices, all in one
 	  driver.  Specifically, it supports:
 		- Suunto ANT+ USB device.
+		- Medtronic CareLink USB device
 		- Fundamental Software dongle.
 		- HP4x calculators
 		- a number of Motorola phones
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index 5565308c870c..7064eb8d6142 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -36,6 +36,11 @@ static struct usb_serial_driver vendor##_device = {		\
 
 #define DEVICE(vendor, IDS)	DEVICE_N(vendor, IDS, 1)
 
+/* Medtronic CareLink USB driver */
+#define CARELINK_IDS()			\
+	{ USB_DEVICE(0x0a21, 0x8001) }	/* MMT-7305WW */
+DEVICE(carelink, CARELINK_IDS);
+
 /* ZIO Motherboard USB driver */
 #define ZIO_IDS()			\
 	{ USB_DEVICE(0x1CBE, 0x0103) }
@@ -88,6 +93,7 @@ DEVICE(siemens_mpi, SIEMENS_IDS);
 
 /* All of the above structures mushed into two lists */
 static struct usb_serial_driver * const serial_drivers[] = {
+	&carelink_device,
 	&zio_device,
 	&funsoft_device,
 	&flashloader_device,
@@ -101,6 +107,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 };
 
 static const struct usb_device_id id_table[] = {
+	CARELINK_IDS(),
 	ZIO_IDS(),
 	FUNSOFT_IDS(),
 	FLASHLOADER_IDS(),
-- 
cgit 


From 7c13325380ee520ece4ddf517c6f6f895eb63f98 Mon Sep 17 00:00:00 2001
From: Frans Klaver <frans.klaver@xsens.com>
Date: Mon, 1 Sep 2014 11:39:21 +0200
Subject: usb: serial: xsens_mt: add author and description

Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/xsens_mt.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/xsens_mt.c b/drivers/usb/serial/xsens_mt.c
index 4841fb57400c..d500ccd57dd4 100644
--- a/drivers/usb/serial/xsens_mt.c
+++ b/drivers/usb/serial/xsens_mt.c
@@ -82,4 +82,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
 
 module_usb_serial_driver(serial_drivers, id_table);
 
+MODULE_AUTHOR("Frans Klaver <frans.klaver@xsens.com>");
+MODULE_DESCRIPTION("USB-serial driver for Xsens motion trackers");
 MODULE_LICENSE("GPL");
-- 
cgit 


From adceac14166da8c466223a35ec59c4a4adeef976 Mon Sep 17 00:00:00 2001
From: Frans Klaver <frans.klaver@xsens.com>
Date: Thu, 4 Sep 2014 09:25:37 +0200
Subject: usb: serial: xsens_mt: always bind to interface number 1

Probe is testing if the current interface provides two bulk endpoints.
While this achieves the goal of only binding to the correct interface,
we already know we can find the device on interface number 1. Stop
checking the endpoints and just return successfully when interface
number 1 is probed.

Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/xsens_mt.c | 23 ++++-------------------
 1 file changed, 4 insertions(+), 19 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/xsens_mt.c b/drivers/usb/serial/xsens_mt.c
index d500ccd57dd4..3837d5113bb2 100644
--- a/drivers/usb/serial/xsens_mt.c
+++ b/drivers/usb/serial/xsens_mt.c
@@ -41,28 +41,13 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static int has_required_endpoints(const struct usb_host_interface *interface)
-{
-	__u8 i;
-	int has_bulk_in = 0;
-	int has_bulk_out = 0;
-
-	for (i = 0; i < interface->desc.bNumEndpoints; ++i) {
-		if (usb_endpoint_is_bulk_in(&interface->endpoint[i].desc))
-			has_bulk_in = 1;
-		else if (usb_endpoint_is_bulk_out(&interface->endpoint[i].desc))
-			has_bulk_out = 1;
-	}
-
-	return has_bulk_in && has_bulk_out;
-}
-
 static int xsens_mt_probe(struct usb_serial *serial,
 					const struct usb_device_id *id)
 {
-	if (!has_required_endpoints(serial->interface->cur_altsetting))
-		return -ENODEV;
-	return 0;
+	if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
+		return 0;
+
+	return -ENODEV;
 }
 
 static struct usb_serial_driver xsens_mt_device = {
-- 
cgit 


From 9c491c372d677b6420e0f8c6361fe422791662cc Mon Sep 17 00:00:00 2001
From: Taylor Braun-Jones <taylor.braun-jones@ge.com>
Date: Thu, 7 Aug 2014 14:25:06 -0400
Subject: USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker device

Signed-off-by: Taylor Braun-Jones <taylor.braun-jones@ge.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c     | 2 ++
 drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
 2 files changed, 8 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ef86fce6e50b..dc72b924c399 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -940,6 +940,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) },
 	/* Infineon Devices */
 	{ USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) },
+	/* GE Healthcare devices */
+	{ USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 8927a5c39b00..5937b2d242f2 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1391,3 +1391,9 @@
  * ekey biometric systems GmbH (http://ekey.net/)
  */
 #define FTDI_EKEY_CONV_USB_PID		0xCB08	/* Converter USB */
+
+/*
+ * GE Healthcare devices
+ */
+#define GE_HEALTHCARE_VID		0x1901
+#define GE_HEALTHCARE_NEMO_TRACKER_PID	0x0015
-- 
cgit 


From f8c0e057b4898055b24b44d03b837a15d8b93b37 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Mon, 15 Sep 2014 18:40:45 +0200
Subject: USB: serial: remove zte_ev driver

The zte_ev driver is based on code (once) distributed by ZTE that still
appears to originally have been reverse-engineered and bolted onto the
generic driver.

A closer analysis of the zte_ev setup code reveals that it consists of
standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE)
but unfortunately fails to get some of those right. In particular, as
reported by Lei Liu, it fails to lower DTR/RTS on close. It also appears
that the control requests lack the interface argument.

Since line control is already handled properly by the option driver, and
the SET/GET_LINE_CODING requests appears to be redundant (amounts to a
SET 9600 8N1) let's remove the redundant zte_ev driver.

Also move the remaining ZTE PIDs to the generic option modem driver.

Reported-by: Lei Liu <liu.lei78@zte.com.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/Kconfig  |   8 --
 drivers/usb/serial/Makefile |   1 -
 drivers/usb/serial/option.c |  11 +-
 drivers/usb/serial/zte_ev.c | 305 --------------------------------------------
 4 files changed, 10 insertions(+), 315 deletions(-)
 delete mode 100644 drivers/usb/serial/zte_ev.c

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index c3119eb251bc..a69f7cd9d0bf 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -684,14 +684,6 @@ config USB_SERIAL_WISHBONE
 	  To compile this driver as a module, choose M here: the
 	  module will be called wishbone-serial.
 
-config USB_SERIAL_ZTE
-	tristate "ZTE USB serial driver"
-	help
-	  Say Y here if you want to use a ZTE USB to serial device.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called zte.
-
 config USB_SERIAL_SSU100
 	tristate "USB Quatech SSU-100 Single Port Serial Driver"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index bfdafd349441..349d9df0895f 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -60,4 +60,3 @@ obj-$(CONFIG_USB_SERIAL_WISHBONE)		+= wishbone-serial.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
 obj-$(CONFIG_USB_SERIAL_XIRCOM)			+= keyspan_pda.o
 obj-$(CONFIG_USB_SERIAL_XSENS_MT)		+= xsens_mt.o
-obj-$(CONFIG_USB_SERIAL_ZTE)			+= zte_ev.o
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 54a8120897a6..d1a3f6044c8a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -276,6 +276,7 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
 #define ZTE_PRODUCT_AC2726			0xfff1
+#define ZTE_PRODUCT_MG880			0xfffd
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
 #define ZTE_PRODUCT_AC8710T			0xffff
 #define ZTE_PRODUCT_MC2718			0xffe8
@@ -1560,7 +1561,15 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
-
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff7, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff8, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffb, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffc, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MG880, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
deleted file mode 100644
index c9bb107d5e5c..000000000000
--- a/drivers/usb/serial/zte_ev.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * ZTE_EV USB serial driver
- *
- * Copyright (C) 2012 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- * Copyright (C) 2012 Linux Foundation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver is based on code found in a ZTE_ENV patch that modified
- * the usb-serial generic driver.  Comments were left in that I think
- * show the commands used to talk to the device, but I am not sure.
- */
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-#include <linux/uaccess.h>
-
-#define  MAX_SETUP_DATA_SIZE	32
-
-static void debug_data(struct device *dev, const char *function, int len,
-		       const unsigned char *data, int result)
-{
-	dev_dbg(dev, "result = %d\n", result);
-	if (result == len)
-		dev_dbg(dev, "%s - length = %d, data = %*ph\n", function,
-			len, len, data);
-}
-
-static int zte_ev_usb_serial_open(struct tty_struct *tty,
-				  struct usb_serial_port *port)
-{
-	struct usb_device *udev = port->serial->dev;
-	struct device *dev = &port->dev;
-	int result = 0;
-	int len;
-	unsigned char *buf;
-
-	buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	/* send 1st ctl cmd(CTL    21 22 01 00  00 00 00 00) */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0001, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	/* send 2st cmd and receive data */
-	/*
-	 * 16.0  CTL    a1 21 00 00  00 00 07 00   CLASS              25.1.0(5)
-	 * 16.0  DI     00 96 00 00  00 00 08
-	 */
-	len = 0x0007;
-	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0x21, 0xa1,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 3rd cmd */
-	/*
-	 * 16.0 CTL    21 20 00 00  00 00 07 00    CLASS                30.1.0
-	 * 16.0 DO     80 25 00 00  00 00 08       .%.....              30.2.0
-	 */
-	len = 0x0007;
-	buf[0] = 0x80;
-	buf[1] = 0x25;
-	buf[2] = 0x00;
-	buf[3] = 0x00;
-	buf[4] = 0x00;
-	buf[5] = 0x00;
-	buf[6] = 0x08;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x20, 0x21,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 4th cmd */
-	/*
-	 * 16.0 CTL    21 22 03 00  00 00 00 00
-	 */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0003, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	/* send 5th cmd */
-	/*
-	 * 16.0  CTL    a1 21 00 00  00 00 07 00   CLASS               33.1.0
-	 * 16.0  DI     80 25 00 00  00 00 08
-	 */
-	len = 0x0007;
-	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0x21, 0xa1,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 6th cmd */
-	/*
-	 * 16.0  CTL    21 20 00 00  00 00 07 00    CLASS               34.1.0
-	 * 16.0  DO     80 25 00 00  00 00 08
-	 */
-	len = 0x0007;
-	buf[0] = 0x80;
-	buf[1] = 0x25;
-	buf[2] = 0x00;
-	buf[3] = 0x00;
-	buf[4] = 0x00;
-	buf[5] = 0x00;
-	buf[6] = 0x08;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x20, 0x21,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-	kfree(buf);
-
-	return usb_serial_generic_open(tty, port);
-}
-
-/*
- *       CTL    21 22 02 00  00 00 00 00         CLASS               338.1.0
- *
- * 16.1  DI     a1 20 00 00  00 00 02 00  02 00  . ........          340.1.0
- * 16.0  CTL    21 22 03 00  00 00 00 00         CLASS               341.1.0
- *
- * 16.0  CTL    a1 21 00 00  00 00 07 00         CLASS               346.1.0(3)
- * 16.0  DI     00 08 07 00  00 00 08            .......             346.2.0
- *
- * 16.0  CTL    21 20 00 00  00 00 07 00         CLASS               349.1.0
- * 16.0  DO     00 c2 01 00  00 00 08            .......             349.2.0
- *
- * 16.0  CTL    21 22 03 00  00 00 00 00         CLASS               350.1.0(2)
- *
- * 16.0  CTL    a1 21 00 00  00 00 07 00         CLASS               352.1.0
- * 16.0  DI     00 c2 01 00  00 00 08            .......             352.2.0
- *
- * 16.1  DI     a1 20 00 00  00 00 02 00  02 00  . ........          353.1.0
- *
- * 16.0  CTL    21 20 00 00  00 00 07 00         CLASS               354.1.0
- * 16.0  DO     00 c2 01 00  00 00 08            .......             354.2.0
- *
- * 16.0  CTL    21 22 03 00  00 00 00 00
-*/
-
-static void zte_ev_usb_serial_close(struct usb_serial_port *port)
-{
-	struct usb_device *udev = port->serial->dev;
-	struct device *dev = &port->dev;
-	int result = 0;
-	int len;
-	unsigned char *buf;
-
-	buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
-	if (!buf)
-		return;
-
-	/* send 1st ctl cmd(CTL    21 22 02 00  00 00 00 00) */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0002, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	/* send 2st ctl cmd(CTL    21 22 03 00  00 00 00 00 ) */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0003, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	/* send  3st cmd and recieve data */
-	/*
-	 * 16.0  CTL    a1 21 00 00  00 00 07 00      CLASS         25.1.0(5)
-	 * 16.0  DI     00 08 07 00  00 00 08
-	 */
-	len = 0x0007;
-	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0x21, 0xa1,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 4th cmd */
-	/*
-	 * 16.0 CTL    21 20 00 00  00 00 07 00      CLASS            30.1.0
-	 * 16.0  DO    00 c2 01 00  00 00 08         .%.....          30.2.0
-	 */
-	len = 0x0007;
-	buf[0] = 0x00;
-	buf[1] = 0xc2;
-	buf[2] = 0x01;
-	buf[3] = 0x00;
-	buf[4] = 0x00;
-	buf[5] = 0x00;
-	buf[6] = 0x08;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x20, 0x21,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 5th cmd */
-	/*
-	 * 16.0 CTL    21 22 03 00  00 00 00 00
-	 */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0003, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	/* send 6th cmd */
-	/*
-	 * 16.0  CTL    a1 21 00 00  00 00 07 00        CLASS          33.1.0
-	 * 16.0  DI     00 c2 01 00  00 00 08
-	 */
-	len = 0x0007;
-	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0x21, 0xa1,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 7th cmd */
-	/*
-	 * 16.0  CTL    21 20 00 00  00 00 07 00  CLASS               354.1.0
-	 * 16.0  DO     00 c2 01 00  00 00 08     .......             354.2.0
-	 */
-	len = 0x0007;
-	buf[0] = 0x00;
-	buf[1] = 0xc2;
-	buf[2] = 0x01;
-	buf[3] = 0x00;
-	buf[4] = 0x00;
-	buf[5] = 0x00;
-	buf[6] = 0x08;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x20, 0x21,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 8th cmd */
-	/*
-	 * 16.0 CTL    21 22 03 00  00 00 00 00
-	 */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0003, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	kfree(buf);
-
-	usb_serial_generic_close(port);
-}
-
-static const struct usb_device_id id_table[] = {
-	{ USB_DEVICE(0x19d2, 0xffec) },
-	{ USB_DEVICE(0x19d2, 0xffee) },
-	{ USB_DEVICE(0x19d2, 0xfff6) },
-	{ USB_DEVICE(0x19d2, 0xfff7) },
-	{ USB_DEVICE(0x19d2, 0xfff8) },
-	{ USB_DEVICE(0x19d2, 0xfff9) },
-	{ USB_DEVICE(0x19d2, 0xfffb) },
-	{ USB_DEVICE(0x19d2, 0xfffc) },
-	/* MG880 */
-	{ USB_DEVICE(0x19d2, 0xfffd) },
-	{ },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver zio_device = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"zte_ev",
-	},
-	.id_table =		id_table,
-	.num_ports =		1,
-	.open =			zte_ev_usb_serial_open,
-	.close =		zte_ev_usb_serial_close,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
-	&zio_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-MODULE_LICENSE("GPL v2");
-- 
cgit 


From bfc2d7dfdd761ae3beccdb26abebe03cef042f46 Mon Sep 17 00:00:00 2001
From: Joe Savage <joe.savage@goketra.com>
Date: Sat, 20 Sep 2014 08:01:16 -0500
Subject: USB: serial: cp210x: added Ketra N1 wireless interface support

Added support for Ketra N1 wireless interface, which uses the
Silicon Labs' CP2104 USB to UART bridge with customized PID 8946.

Signed-off-by: Joe Savage <joe.savage@goketra.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e4bb62225cb9..0e805da2c4a7 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -122,6 +122,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
+	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
-- 
cgit 


From dee80ad12d2b1b304286a707fde7ab05d1fc7bab Mon Sep 17 00:00:00 2001
From: Andreas Bomholtz <andreas@seluxit.com>
Date: Mon, 22 Sep 2014 09:50:43 +0200
Subject: USB: cp210x: add support for Seluxit USB dongle

Added the Seluxit ApS USB Serial Dongle to cp210x driver.

Signed-off-by: Andreas Bomholtz <andreas@seluxit.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 0e805da2c4a7..eca1747ca8c7 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -156,6 +156,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+	{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
 	{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
-- 
cgit 


From d95e3caea2d1424dfdec30b46bd94087da94f928 Mon Sep 17 00:00:00 2001
From: Peter Hurley <peter@hurleysoftware.com>
Date: Wed, 10 Sep 2014 15:06:27 -0400
Subject: usb: serial: Remove unused tty->hw_stopped

The tty core does not test tty->hw_stopped; remove from drivers
which don't test it themselves.

Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/digi_acceleport.c  | 7 +------
 drivers/usb/serial/io_ti.c            | 7 +------
 drivers/usb/serial/ti_usb_3410_5052.c | 7 +------
 3 files changed, 3 insertions(+), 18 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 8a23c53b946e..12b0e67473ba 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -834,7 +834,6 @@ static void digi_set_termios(struct tty_struct *tty,
 			arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS;
 		} else {
 			arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS;
-			tty->hw_stopped = 0;
 		}
 
 		buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL;
@@ -1500,15 +1499,11 @@ static int digi_read_oob_callback(struct urb *urb)
 			if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
 				priv->dp_modem_signals |= TIOCM_CTS;
 				/* port must be open to use tty struct */
-				if (rts) {
-					tty->hw_stopped = 0;
+				if (rts)
 					tty_port_tty_wakeup(&port->port);
-				}
 			} else {
 				priv->dp_modem_signals &= ~TIOCM_CTS;
 				/* port must be open to use tty struct */
-				if (rts)
-					tty->hw_stopped = 1;
 			}
 			if (val & DIGI_READ_INPUT_SIGNALS_DSR)
 				priv->dp_modem_signals |= TIOCM_DSR;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index c0a42e9e6777..ddbb8fe1046d 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1456,12 +1456,8 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 	tty = tty_port_tty_get(&edge_port->port->port);
 	/* handle CTS flow control */
 	if (tty && C_CRTSCTS(tty)) {
-		if (msr & EDGEPORT_MSR_CTS) {
-			tty->hw_stopped = 0;
+		if (msr & EDGEPORT_MSR_CTS)
 			tty_wakeup(tty);
-		} else {
-			tty->hw_stopped = 1;
-		}
 	}
 	tty_kref_put(tty);
 }
@@ -2177,7 +2173,6 @@ static void change_port_settings(struct tty_struct *tty,
 		dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__);
 	} else {
 		dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__);
-		tty->hw_stopped = 0;
 		restart_read(edge_port);
 	}
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 3dd3ff8c50d3..e9da41d9fe7f 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -773,7 +773,6 @@ static void ti_set_termios(struct tty_struct *tty,
 			config->wFlags |= TI_UART_ENABLE_RTS_IN;
 		config->wFlags |= TI_UART_ENABLE_CTS_OUT;
 	} else {
-		tty->hw_stopped = 0;
 		ti_restart_read(tport, tty);
 	}
 
@@ -1291,12 +1290,8 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 	/* handle CTS flow control */
 	tty = tty_port_tty_get(&tport->tp_port->port);
 	if (tty && C_CRTSCTS(tty)) {
-		if (msr & TI_MSR_CTS) {
-			tty->hw_stopped = 0;
+		if (msr & TI_MSR_CTS)
 			tty_wakeup(tty);
-		} else {
-			tty->hw_stopped = 1;
-		}
 	}
 	tty_kref_put(tty);
 }
-- 
cgit 


From 35cc83eab097e5720a9cc0ec12bdc3a726f58381 Mon Sep 17 00:00:00 2001
From: Nathaniel Ting <nathaniel.ting@silabs.com>
Date: Fri, 3 Oct 2014 12:01:20 -0400
Subject: USB: serial: cp210x: add Silicon Labs 358x VID and PID

Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial
driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now
connect to host PCs over a USB serial link.

Signed-off-by: Nathaniel Ting <nathaniel.ting@silabs.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/cp210x.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index eca1747ca8c7..cfd009dc4018 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -155,6 +155,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+	{ USB_DEVICE(0x1BA4, 0x0002) },	/* Silicon Labs 358x factory default */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
 	{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
-- 
cgit 


From edd74ffab1f6909eee400c7de8ce621870aacac9 Mon Sep 17 00:00:00 2001
From: Frans Klaver <frans.klaver@xsens.com>
Date: Fri, 10 Oct 2014 11:52:08 +0200
Subject: usb: serial: ftdi_sio: add Awinda Station and Dongle products

Add new IDs for the Xsens Awinda Station and Awinda Dongle.

While at it, order the definitions by PID and add a logical separation
between devices using Xsens' VID and those using FTDI's VID.

Cc: <stable@vger.kernel.org>
Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/ftdi_sio.c     | 2 ++
 drivers/usb/serial/ftdi_sio_ids.h | 6 +++++-
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index dc72b924c399..1f73ca3f6904 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -661,6 +661,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
+	{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
 	{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 5937b2d242f2..b68084c11432 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -143,8 +143,12 @@
  * Xsens Technologies BV products (http://www.xsens.com).
  */
 #define XSENS_VID		0x2639
-#define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
+#define XSENS_AWINDA_STATION_PID 0x0101
+#define XSENS_AWINDA_DONGLE_PID 0x0102
 #define XSENS_MTW_PID		0x0200	/* Xsens MTw */
+#define XSENS_CONVERTER_PID	0xD00D	/* Xsens USB-serial converter */
+
+/* Xsens devices using FTDI VID */
 #define XSENS_CONVERTER_0_PID	0xD388	/* Xsens USB converter */
 #define XSENS_CONVERTER_1_PID	0xD389	/* Xsens Wireless Receiver */
 #define XSENS_CONVERTER_2_PID	0xD38A
-- 
cgit 


From 2d0eb862dd477c3c4f32b201254ca0b40e6f465c Mon Sep 17 00:00:00 2001
From: Daniele Palmas <dnlplm@gmail.com>
Date: Tue, 14 Oct 2014 10:47:37 +0200
Subject: usb: option: add support for Telit LE910

Add VID/PID for Telit LE910 modem. Interfaces description is almost the
same than LE920, except that the qmi interface is number 2 (instead than
5).

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/option.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d1a3f6044c8a..19280a32ec89 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -269,6 +269,7 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_DE910_DUAL		0x1010
 #define TELIT_PRODUCT_UE910_V2			0x1012
 #define TELIT_PRODUCT_LE920			0x1200
+#define TELIT_PRODUCT_LE910			0x1201
 
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
@@ -589,6 +590,11 @@ static const struct option_blacklist_info zte_1255_blacklist = {
 	.reserved = BIT(3) | BIT(4),
 };
 
+static const struct option_blacklist_info telit_le910_blacklist = {
+	.sendsetup = BIT(0),
+	.reserved = BIT(1) | BIT(2),
+};
+
 static const struct option_blacklist_info telit_le920_blacklist = {
 	.sendsetup = BIT(0),
 	.reserved = BIT(1) | BIT(5),
@@ -1138,6 +1144,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
+		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
 		.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
-- 
cgit 


From 012eee1522318b5ccd64d277d50ac32f7e9974fe Mon Sep 17 00:00:00 2001
From: Dan Williams <dcbw@redhat.com>
Date: Tue, 14 Oct 2014 11:10:41 -0500
Subject: USB: option: add Haier CE81B CDMA modem

Port layout:

0: QCDM/DIAG
1: NMEA
2: AT
3: AT/PPP

Signed-off-by: Dan Williams <dcbw@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 19280a32ec89..7a4c21b4f676 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -363,6 +363,7 @@ static void option_instat_callback(struct urb *urb);
 
 /* Haier products */
 #define HAIER_VENDOR_ID				0x201e
+#define HAIER_PRODUCT_CE81B			0x10f8
 #define HAIER_PRODUCT_CE100			0x2009
 
 /* Cinterion (formerly Siemens) products */
@@ -1629,6 +1630,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HAIER_VENDOR_ID, HAIER_PRODUCT_CE81B, 0xff, 0xff, 0xff) },
 	/* Pirelli  */
 	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) },
 	{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2, 0xff) },
-- 
cgit 


From dc477ad386fb9fc63b399879f40ff9930d9d48ff Mon Sep 17 00:00:00 2001
From: Peter Hurley <peter@hurleysoftware.com>
Date: Thu, 16 Oct 2014 13:59:22 -0400
Subject: USB: kobil_sct: Remove unused transfer buffer allocs

Commit 90419cfcb5d9c889b10dc51363c56a4d394d670e,
"USB: kobil_sct: fix control requests without data stage", removed
the bogus data buffer arguments, but still allocate transfer
buffers which are not used.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/kobil_sct.c | 15 ---------------
 1 file changed, 15 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 078f9ed419c8..3d2bd65df0fc 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -414,8 +414,6 @@ static int kobil_tiocmset(struct tty_struct *tty,
 	int result;
 	int dtr = 0;
 	int rts = 0;
-	unsigned char *transfer_buffer;
-	int transfer_buffer_length = 8;
 
 	/* FIXME: locking ? */
 	priv = usb_get_serial_port_data(port);
@@ -425,11 +423,6 @@ static int kobil_tiocmset(struct tty_struct *tty,
 		return -EINVAL;
 	}
 
-	/* allocate memory for transfer buffer */
-	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
-	if (!transfer_buffer)
-		return -ENOMEM;
-
 	if (set & TIOCM_RTS)
 		rts = 1;
 	if (set & TIOCM_DTR)
@@ -469,7 +462,6 @@ static int kobil_tiocmset(struct tty_struct *tty,
 			KOBIL_TIMEOUT);
 	}
 	dev_dbg(dev, "%s - Send set_status_line URB returns: %i\n", __func__, result);
-	kfree(transfer_buffer);
 	return (result < 0) ? result : 0;
 }
 
@@ -530,8 +522,6 @@ static int kobil_ioctl(struct tty_struct *tty,
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct kobil_private *priv = usb_get_serial_port_data(port);
-	unsigned char *transfer_buffer;
-	int transfer_buffer_length = 8;
 	int result;
 
 	if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
@@ -541,10 +531,6 @@ static int kobil_ioctl(struct tty_struct *tty,
 
 	switch (cmd) {
 	case TCFLSH:
-		transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
-		if (!transfer_buffer)
-			return -ENOBUFS;
-
 		result = usb_control_msg(port->serial->dev,
 			  usb_sndctrlpipe(port->serial->dev, 0),
 			  SUSBCRequest_Misc,
@@ -559,7 +545,6 @@ static int kobil_ioctl(struct tty_struct *tty,
 		dev_dbg(&port->dev,
 			"%s - Send reset_all_queues (FLUSH) URB returns: %i\n",
 			__func__, result);
-		kfree(transfer_buffer);
 		return (result < 0) ? -EIO: 0;
 	default:
 		return -ENOIOCTLCMD;
-- 
cgit 


From 7f2719f0003da1ad13124ef00f48d7514c79e30d Mon Sep 17 00:00:00 2001
From: Perry Hung <iperry@gmail.com>
Date: Wed, 22 Oct 2014 23:31:34 -0400
Subject: usb: serial: ftdi_sio: add "bricked" FTDI device PID

An official recent Windows driver from FTDI detects counterfeit devices
and reprograms the internal EEPROM containing the USB PID to 0, effectively
bricking the device.

Add support for this VID/PID pair to correctly bind the driver on these
devices.

See:
http://hackaday.com/2014/10/22/watch-that-windows-update-ftdi-drivers-are-killing-fake-chips/

Signed-off-by: Perry Hung <iperry@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/ftdi_sio.c     | 1 +
 drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
 2 files changed, 7 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1f73ca3f6904..0dad8ce5a609 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -140,6 +140,7 @@ static struct ftdi_sio_quirk ftdi_8u2232c_quirk = {
  * /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report.
  */
 static const struct usb_device_id id_table_combined[] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_BRICK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index b68084c11432..6786b705ccf6 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -30,6 +30,12 @@
 
 /*** third-party PIDs (using FTDI_VID) ***/
 
+/*
+ * Certain versions of the official Windows FTDI driver reprogrammed
+ * counterfeit FTDI devices to PID 0. Support these devices anyway.
+ */
+#define FTDI_BRICK_PID		0x0000
+
 #define FTDI_LUMEL_PD12_PID	0x6002
 
 /*
-- 
cgit 


From 191252837626fca0de694c18bb2aa64c118eda89 Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Wed, 29 Oct 2014 09:07:30 +0100
Subject: USB: kobil_sct: fix non-atomic allocation in write path

Write may be called from interrupt context so make sure to use
GFP_ATOMIC for all allocations in write.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/kobil_sct.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 3d2bd65df0fc..02c420af251e 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -335,7 +335,8 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			port->interrupt_out_urb->transfer_buffer_length = length;
 
 			priv->cur_pos = priv->cur_pos + length;
-			result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO);
+			result = usb_submit_urb(port->interrupt_out_urb,
+					GFP_ATOMIC);
 			dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result);
 			todo = priv->filled - priv->cur_pos;
 
@@ -350,7 +351,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 		if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
 			priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
 			result = usb_submit_urb(port->interrupt_in_urb,
-								GFP_NOIO);
+					GFP_ATOMIC);
 			dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
 		}
 	}
-- 
cgit 


From e681286de221af78fc85db9222b6a203148c005a Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Wed, 29 Oct 2014 09:07:31 +0100
Subject: USB: opticon: fix non-atomic allocation in write path

Write may be called from interrupt context so make sure to use
GFP_ATOMIC for all allocations in write.

Fixes: 0d930e51cfe6 ("USB: opticon: Add Opticon OPN2001 write support")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/opticon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4856fb7e637e..4b7bfb394a32 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -215,7 +215,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	/* The connected devices do not have a bulk write endpoint,
 	 * to transmit data to de barcode device the control endpoint is used */
-	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+	dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
 	if (!dr) {
 		count = -ENOMEM;
 		goto error_no_dr;
-- 
cgit