From 89fd8ee86c02735b67d9113d55375861cca2ef19 Mon Sep 17 00:00:00 2001 From: Maksim Salau Date: Mon, 13 Feb 2017 15:14:34 +0300 Subject: USB: serial: upd78f0730: add ID for EVAL-ADXL362Z The adaptor on Analog Devices EVAL-ADXL362Z development board is used to flash and debug firmware of on-board Renesas RL78/G13 MCU. Also added support of the 153600 baud rate, since the stock firmware uses it. Signed-off-by: Maksim Salau Signed-off-by: Johan Hovold --- drivers/usb/serial/upd78f0730.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/upd78f0730.c b/drivers/usb/serial/upd78f0730.c index 55b9a18b6c38..f1e6c07ffc81 100644 --- a/drivers/usb/serial/upd78f0730.c +++ b/drivers/usb/serial/upd78f0730.c @@ -17,7 +17,7 @@ * - stop bits: 1 or 2 * - parity: even, odd or none * - flow control: none - * - baud rates: 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200 + * - baud rates: 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600 * - signals: DTR, RTS and BREAK */ @@ -34,6 +34,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x045B, 0x0212) }, /* YRPBRL78G13, YRPBRL78G14 */ { USB_DEVICE(0x0409, 0x0063) }, /* V850ESJX3-STICK */ + { USB_DEVICE(0x064B, 0x7825) }, /* Analog Devices EVAL-ADXL362Z-DB */ {} }; @@ -288,7 +289,7 @@ static speed_t upd78f0730_get_baud_rate(struct tty_struct *tty) { const speed_t baud_rate = tty_get_baud_rate(tty); const speed_t supported[] = { - 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200 + 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600 }; int i; -- cgit From d0c54f2f5be8ce90540256260066ce0bf4579e17 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 13 Feb 2017 14:49:39 +0100 Subject: USB: serial: upd78f0730: sort device ids Sort the device ids by vendor id. Signed-off-by: Johan Hovold --- drivers/usb/serial/upd78f0730.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/upd78f0730.c b/drivers/usb/serial/upd78f0730.c index f1e6c07ffc81..a028dd2310c9 100644 --- a/drivers/usb/serial/upd78f0730.c +++ b/drivers/usb/serial/upd78f0730.c @@ -32,8 +32,8 @@ #define DRIVER_AUTHOR "Maksim Salau " static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x045B, 0x0212) }, /* YRPBRL78G13, YRPBRL78G14 */ { USB_DEVICE(0x0409, 0x0063) }, /* V850ESJX3-STICK */ + { USB_DEVICE(0x045B, 0x0212) }, /* YRPBRL78G13, YRPBRL78G14 */ { USB_DEVICE(0x064B, 0x7825) }, /* Analog Devices EVAL-ADXL362Z-DB */ {} }; -- cgit From 35d479762bef1a38b20decbb6f1060043d833fdd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 15 Feb 2017 11:09:50 +0100 Subject: USB: serial: io_edgeport: drop io-tables header file Move the driver device-id tables and usb-serial driver definitions to the source file where they are expected to be found. Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/io_edgeport.c | 217 +++++++++++++++++++++++++++++++++++- drivers/usb/serial/io_tables.h | 232 --------------------------------------- 2 files changed, 215 insertions(+), 234 deletions(-) delete mode 100644 drivers/usb/serial/io_tables.h (limited to 'drivers/usb') diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 92abf92e5669..bb7673e80a57 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -57,6 +57,88 @@ #define OPEN_TIMEOUT (5*HZ) /* 5 seconds */ +static const struct usb_device_id edgeport_2port_id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) }, + { } +}; + +static const struct usb_device_id edgeport_4port_id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) }, + { } +}; + +static const struct usb_device_id edgeport_8port_id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) }, + { } +}; + +static const struct usb_device_id Epic_port_id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) }, + { } +}; + +/* Devices that this driver supports */ +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + + /* receive port state */ enum RXSTATE { EXPECT_HDR1 = 0, /* Expect header byte 1 */ @@ -217,8 +299,6 @@ static void edge_release(struct usb_serial *serial); static int edge_port_probe(struct usb_serial_port *port); static int edge_port_remove(struct usb_serial_port *port); -#include "io_tables.h" /* all of the devices that this driver supports */ - /* function prototypes for all of our local functions */ static void process_rcvd_data(struct edgeport_serial *edge_serial, @@ -3032,6 +3112,139 @@ static int edge_port_remove(struct usb_serial_port *port) return 0; } +static struct usb_serial_driver edgeport_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_2", + }, + .description = "Edgeport 2 port adapter", + .id_table = edgeport_2port_id_table, + .num_ports = 2, + .open = edge_open, + .close = edge_close, + .throttle = edge_throttle, + .unthrottle = edge_unthrottle, + .attach = edge_startup, + .disconnect = edge_disconnect, + .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, + .ioctl = edge_ioctl, + .set_termios = edge_set_termios, + .tiocmget = edge_tiocmget, + .tiocmset = edge_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .write = edge_write, + .write_room = edge_write_room, + .chars_in_buffer = edge_chars_in_buffer, + .break_ctl = edge_break, + .read_int_callback = edge_interrupt_callback, + .read_bulk_callback = edge_bulk_in_callback, + .write_bulk_callback = edge_bulk_out_data_callback, +}; + +static struct usb_serial_driver edgeport_4port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_4", + }, + .description = "Edgeport 4 port adapter", + .id_table = edgeport_4port_id_table, + .num_ports = 4, + .open = edge_open, + .close = edge_close, + .throttle = edge_throttle, + .unthrottle = edge_unthrottle, + .attach = edge_startup, + .disconnect = edge_disconnect, + .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, + .ioctl = edge_ioctl, + .set_termios = edge_set_termios, + .tiocmget = edge_tiocmget, + .tiocmset = edge_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .write = edge_write, + .write_room = edge_write_room, + .chars_in_buffer = edge_chars_in_buffer, + .break_ctl = edge_break, + .read_int_callback = edge_interrupt_callback, + .read_bulk_callback = edge_bulk_in_callback, + .write_bulk_callback = edge_bulk_out_data_callback, +}; + +static struct usb_serial_driver edgeport_8port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_8", + }, + .description = "Edgeport 8 port adapter", + .id_table = edgeport_8port_id_table, + .num_ports = 8, + .open = edge_open, + .close = edge_close, + .throttle = edge_throttle, + .unthrottle = edge_unthrottle, + .attach = edge_startup, + .disconnect = edge_disconnect, + .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, + .ioctl = edge_ioctl, + .set_termios = edge_set_termios, + .tiocmget = edge_tiocmget, + .tiocmset = edge_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .write = edge_write, + .write_room = edge_write_room, + .chars_in_buffer = edge_chars_in_buffer, + .break_ctl = edge_break, + .read_int_callback = edge_interrupt_callback, + .read_bulk_callback = edge_bulk_in_callback, + .write_bulk_callback = edge_bulk_out_data_callback, +}; + +static struct usb_serial_driver epic_device = { + .driver = { + .owner = THIS_MODULE, + .name = "epic", + }, + .description = "EPiC device", + .id_table = Epic_port_id_table, + .num_ports = 1, + .open = edge_open, + .close = edge_close, + .throttle = edge_throttle, + .unthrottle = edge_unthrottle, + .attach = edge_startup, + .disconnect = edge_disconnect, + .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, + .ioctl = edge_ioctl, + .set_termios = edge_set_termios, + .tiocmget = edge_tiocmget, + .tiocmset = edge_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .write = edge_write, + .write_room = edge_write_room, + .chars_in_buffer = edge_chars_in_buffer, + .break_ctl = edge_break, + .read_int_callback = edge_interrupt_callback, + .read_bulk_callback = edge_bulk_in_callback, + .write_bulk_callback = edge_bulk_out_data_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &edgeport_2port_device, &edgeport_4port_device, + &edgeport_8port_device, &epic_device, NULL +}; + module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h deleted file mode 100644 index ae5fac5656c9..000000000000 --- a/drivers/usb/serial/io_tables.h +++ /dev/null @@ -1,232 +0,0 @@ -/* - * IO Edgeport Driver tables - * - * Copyright (C) 2001 - * Greg Kroah-Hartman (greg@kroah.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#ifndef IO_TABLES_H -#define IO_TABLES_H - -static const struct usb_device_id edgeport_2port_id_table[] = { - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) }, - { } -}; - -static const struct usb_device_id edgeport_4port_id_table[] = { - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) }, - { } -}; - -static const struct usb_device_id edgeport_8port_id_table[] = { - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) }, - { } -}; - -static const struct usb_device_id Epic_port_id_table[] = { - { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) }, - { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) }, - { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) }, - { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) }, - { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) }, - { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) }, - { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) }, - { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) }, - { } -}; - -/* Devices that this driver supports */ -static const struct usb_device_id id_table_combined[] = { - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) }, - { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) }, - { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) }, - { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) }, - { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) }, - { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) }, - { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) }, - { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) }, - { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) }, - { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) }, - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, id_table_combined); - -static struct usb_serial_driver edgeport_2port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "edgeport_2", - }, - .description = "Edgeport 2 port adapter", - .id_table = edgeport_2port_id_table, - .num_ports = 2, - .open = edge_open, - .close = edge_close, - .throttle = edge_throttle, - .unthrottle = edge_unthrottle, - .attach = edge_startup, - .disconnect = edge_disconnect, - .release = edge_release, - .port_probe = edge_port_probe, - .port_remove = edge_port_remove, - .ioctl = edge_ioctl, - .set_termios = edge_set_termios, - .tiocmget = edge_tiocmget, - .tiocmset = edge_tiocmset, - .tiocmiwait = usb_serial_generic_tiocmiwait, - .get_icount = usb_serial_generic_get_icount, - .write = edge_write, - .write_room = edge_write_room, - .chars_in_buffer = edge_chars_in_buffer, - .break_ctl = edge_break, - .read_int_callback = edge_interrupt_callback, - .read_bulk_callback = edge_bulk_in_callback, - .write_bulk_callback = edge_bulk_out_data_callback, -}; - -static struct usb_serial_driver edgeport_4port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "edgeport_4", - }, - .description = "Edgeport 4 port adapter", - .id_table = edgeport_4port_id_table, - .num_ports = 4, - .open = edge_open, - .close = edge_close, - .throttle = edge_throttle, - .unthrottle = edge_unthrottle, - .attach = edge_startup, - .disconnect = edge_disconnect, - .release = edge_release, - .port_probe = edge_port_probe, - .port_remove = edge_port_remove, - .ioctl = edge_ioctl, - .set_termios = edge_set_termios, - .tiocmget = edge_tiocmget, - .tiocmset = edge_tiocmset, - .tiocmiwait = usb_serial_generic_tiocmiwait, - .get_icount = usb_serial_generic_get_icount, - .write = edge_write, - .write_room = edge_write_room, - .chars_in_buffer = edge_chars_in_buffer, - .break_ctl = edge_break, - .read_int_callback = edge_interrupt_callback, - .read_bulk_callback = edge_bulk_in_callback, - .write_bulk_callback = edge_bulk_out_data_callback, -}; - -static struct usb_serial_driver edgeport_8port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "edgeport_8", - }, - .description = "Edgeport 8 port adapter", - .id_table = edgeport_8port_id_table, - .num_ports = 8, - .open = edge_open, - .close = edge_close, - .throttle = edge_throttle, - .unthrottle = edge_unthrottle, - .attach = edge_startup, - .disconnect = edge_disconnect, - .release = edge_release, - .port_probe = edge_port_probe, - .port_remove = edge_port_remove, - .ioctl = edge_ioctl, - .set_termios = edge_set_termios, - .tiocmget = edge_tiocmget, - .tiocmset = edge_tiocmset, - .tiocmiwait = usb_serial_generic_tiocmiwait, - .get_icount = usb_serial_generic_get_icount, - .write = edge_write, - .write_room = edge_write_room, - .chars_in_buffer = edge_chars_in_buffer, - .break_ctl = edge_break, - .read_int_callback = edge_interrupt_callback, - .read_bulk_callback = edge_bulk_in_callback, - .write_bulk_callback = edge_bulk_out_data_callback, -}; - -static struct usb_serial_driver epic_device = { - .driver = { - .owner = THIS_MODULE, - .name = "epic", - }, - .description = "EPiC device", - .id_table = Epic_port_id_table, - .num_ports = 1, - .open = edge_open, - .close = edge_close, - .throttle = edge_throttle, - .unthrottle = edge_unthrottle, - .attach = edge_startup, - .disconnect = edge_disconnect, - .release = edge_release, - .port_probe = edge_port_probe, - .port_remove = edge_port_remove, - .ioctl = edge_ioctl, - .set_termios = edge_set_termios, - .tiocmget = edge_tiocmget, - .tiocmset = edge_tiocmset, - .tiocmiwait = usb_serial_generic_tiocmiwait, - .get_icount = usb_serial_generic_get_icount, - .write = edge_write, - .write_room = edge_write_room, - .chars_in_buffer = edge_chars_in_buffer, - .break_ctl = edge_break, - .read_int_callback = edge_interrupt_callback, - .read_bulk_callback = edge_bulk_in_callback, - .write_bulk_callback = edge_bulk_out_data_callback, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &edgeport_2port_device, &edgeport_4port_device, - &edgeport_8port_device, &epic_device, NULL -}; - -#endif - -- cgit From beabdc3cd3e3ef9a56b62ee0e0b0663edacd5264 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 15 Feb 2017 11:09:51 +0100 Subject: USB: serial: keyspan: drop header file Move all declarations and definitions in keyspan.h to keyspan.c, which is the only place were they are used. This specifically moves the driver device-id tables and usb-serial driver definitions to the source file where they are expected to be found. While at it, fix up some multi-line comments and minor white-space issues (spaces instead of tabs and superfluous white space). Note that the information in the comment header of the removed header file is also present in the source file. Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold --- drivers/usb/serial/keyspan.c | 592 +++++++++++++++++++++++++++++++++++++++- drivers/usb/serial/keyspan.h | 629 ------------------------------------------- 2 files changed, 589 insertions(+), 632 deletions(-) delete mode 100644 drivers/usb/serial/keyspan.h (limited to 'drivers/usb') diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 1f9414bdd649..5662d324edd2 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -41,11 +41,508 @@ #include #include #include -#include "keyspan.h" #define DRIVER_AUTHOR "Hugh Blemings driver_data; @@ -2523,6 +3018,97 @@ static int keyspan_port_remove(struct usb_serial_port *port) return 0; } +/* Structs for the devices, pre and post renumeration. */ +static struct usb_serial_driver keyspan_pre_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_no_firm", + }, + .description = "Keyspan - (without firmware)", + .id_table = keyspan_pre_ids, + .num_ports = 1, + .attach = keyspan_fake_startup, +}; + +static struct usb_serial_driver keyspan_1port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_1", + }, + .description = "Keyspan 1 port adapter", + .id_table = keyspan_1port_ids, + .num_ports = 1, + .open = keyspan_open, + .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, + .write = keyspan_write, + .write_room = keyspan_write_room, + .set_termios = keyspan_set_termios, + .break_ctl = keyspan_break_ctl, + .tiocmget = keyspan_tiocmget, + .tiocmset = keyspan_tiocmset, + .attach = keyspan_startup, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, +}; + +static struct usb_serial_driver keyspan_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_2", + }, + .description = "Keyspan 2 port adapter", + .id_table = keyspan_2port_ids, + .num_ports = 2, + .open = keyspan_open, + .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, + .write = keyspan_write, + .write_room = keyspan_write_room, + .set_termios = keyspan_set_termios, + .break_ctl = keyspan_break_ctl, + .tiocmget = keyspan_tiocmget, + .tiocmset = keyspan_tiocmset, + .attach = keyspan_startup, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, +}; + +static struct usb_serial_driver keyspan_4port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_4", + }, + .description = "Keyspan 4 port adapter", + .id_table = keyspan_4port_ids, + .num_ports = 4, + .open = keyspan_open, + .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, + .write = keyspan_write, + .write_room = keyspan_write_room, + .set_termios = keyspan_set_termios, + .break_ctl = keyspan_break_ctl, + .tiocmget = keyspan_tiocmget, + .tiocmset = keyspan_tiocmset, + .attach = keyspan_startup, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &keyspan_pre_device, &keyspan_1port_device, + &keyspan_2port_device, &keyspan_4port_device, NULL +}; + +module_usb_serial_driver(serial_drivers, keyspan_ids_combined); + MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h deleted file mode 100644 index 0273dda303a4..000000000000 --- a/drivers/usb/serial/keyspan.h +++ /dev/null @@ -1,629 +0,0 @@ -/* - Keyspan USB to Serial Converter driver - - (C) Copyright (C) 2000-2001 - Hugh Blemings - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - See http://blemings.org/hugh/keyspan.html for more information. - - Code in this driver inspired by and in a number of places taken - from Brian Warner's original Keyspan-PDA driver. - - This driver has been put together with the support of Innosys, Inc. - and Keyspan, Inc the manufacturers of the Keyspan USB-serial products. - Thanks Guys :) - - Thanks to Paulus for miscellaneous tidy ups, some largish chunks - of much nicer and/or completely new code and (perhaps most uniquely) - having the patience to sit down and explain why and where he'd changed - stuff. - - Tip 'o the hat to IBM (and previously Linuxcare :) for supporting - staff in their work on open source projects. - - See keyspan.c for update history. - -*/ - -#ifndef __LINUX_USB_SERIAL_KEYSPAN_H -#define __LINUX_USB_SERIAL_KEYSPAN_H - - -/* Function prototypes for Keyspan serial converter */ -static int keyspan_open (struct tty_struct *tty, - struct usb_serial_port *port); -static void keyspan_close (struct usb_serial_port *port); -static void keyspan_dtr_rts (struct usb_serial_port *port, int on); -static int keyspan_startup (struct usb_serial *serial); -static void keyspan_disconnect (struct usb_serial *serial); -static void keyspan_release (struct usb_serial *serial); -static int keyspan_port_probe(struct usb_serial_port *port); -static int keyspan_port_remove(struct usb_serial_port *port); -static int keyspan_write_room (struct tty_struct *tty); - -static int keyspan_write (struct tty_struct *tty, - struct usb_serial_port *port, - const unsigned char *buf, - int count); - -static void keyspan_send_setup (struct usb_serial_port *port, - int reset_port); - - -static void keyspan_set_termios (struct tty_struct *tty, - struct usb_serial_port *port, - struct ktermios *old); -static void keyspan_break_ctl (struct tty_struct *tty, - int break_state); -static int keyspan_tiocmget (struct tty_struct *tty); -static int keyspan_tiocmset (struct tty_struct *tty, - unsigned int set, - unsigned int clear); -static int keyspan_fake_startup (struct usb_serial *serial); - -static int keyspan_usa19_calc_baud (struct usb_serial_port *port, - u32 baud_rate, u32 baudclk, - u8 *rate_hi, u8 *rate_low, - u8 *prescaler, int portnum); - -static int keyspan_usa19w_calc_baud (struct usb_serial_port *port, - u32 baud_rate, u32 baudclk, - u8 *rate_hi, u8 *rate_low, - u8 *prescaler, int portnum); - -static int keyspan_usa28_calc_baud (struct usb_serial_port *port, - u32 baud_rate, u32 baudclk, - u8 *rate_hi, u8 *rate_low, - u8 *prescaler, int portnum); - -static int keyspan_usa19hs_calc_baud (struct usb_serial_port *port, - u32 baud_rate, u32 baudclk, - u8 *rate_hi, u8 *rate_low, - u8 *prescaler, int portnum); - -static int keyspan_usa28_send_setup (struct usb_serial *serial, - struct usb_serial_port *port, - int reset_port); -static int keyspan_usa26_send_setup (struct usb_serial *serial, - struct usb_serial_port *port, - int reset_port); -static int keyspan_usa49_send_setup (struct usb_serial *serial, - struct usb_serial_port *port, - int reset_port); - -static int keyspan_usa90_send_setup (struct usb_serial *serial, - struct usb_serial_port *port, - int reset_port); - -static int keyspan_usa67_send_setup (struct usb_serial *serial, - struct usb_serial_port *port, - int reset_port); - -/* Values used for baud rate calculation - device specific */ -#define KEYSPAN_INVALID_BAUD_RATE (-1) -#define KEYSPAN_BAUD_RATE_OK (0) -#define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a guess */ -#define KEYSPAN_USA19_BAUDCLK (12000000L) -#define KEYSPAN_USA19W_BAUDCLK (24000000L) -#define KEYSPAN_USA19HS_BAUDCLK (14769231L) -#define KEYSPAN_USA28_BAUDCLK (1843200L) -#define KEYSPAN_USA28X_BAUDCLK (12000000L) -#define KEYSPAN_USA49W_BAUDCLK (48000000L) - -/* Some constants used to characterise each device. */ -#define KEYSPAN_MAX_NUM_PORTS (4) -#define KEYSPAN_MAX_FLIPS (2) - -/* Device info for the Keyspan serial converter, used - by the overall usb-serial probe function */ -#define KEYSPAN_VENDOR_ID (0x06cd) - -/* Product IDs for the products supported, pre-renumeration */ -#define keyspan_usa18x_pre_product_id 0x0105 -#define keyspan_usa19_pre_product_id 0x0103 -#define keyspan_usa19qi_pre_product_id 0x010b -#define keyspan_mpr_pre_product_id 0x011b -#define keyspan_usa19qw_pre_product_id 0x0118 -#define keyspan_usa19w_pre_product_id 0x0106 -#define keyspan_usa28_pre_product_id 0x0101 -#define keyspan_usa28x_pre_product_id 0x0102 -#define keyspan_usa28xa_pre_product_id 0x0114 -#define keyspan_usa28xb_pre_product_id 0x0113 -#define keyspan_usa49w_pre_product_id 0x0109 -#define keyspan_usa49wlc_pre_product_id 0x011a - -/* Product IDs post-renumeration. Note that the 28x and 28xb - have the same id's post-renumeration but behave identically - so it's not an issue. As such, the 28xb is not listed in any - of the device tables. */ -#define keyspan_usa18x_product_id 0x0112 -#define keyspan_usa19_product_id 0x0107 -#define keyspan_usa19qi_product_id 0x010c -#define keyspan_usa19hs_product_id 0x0121 -#define keyspan_mpr_product_id 0x011c -#define keyspan_usa19qw_product_id 0x0119 -#define keyspan_usa19w_product_id 0x0108 -#define keyspan_usa28_product_id 0x010f -#define keyspan_usa28x_product_id 0x0110 -#define keyspan_usa28xa_product_id 0x0115 -#define keyspan_usa28xb_product_id 0x0110 -#define keyspan_usa28xg_product_id 0x0135 -#define keyspan_usa49w_product_id 0x010a -#define keyspan_usa49wlc_product_id 0x012a -#define keyspan_usa49wg_product_id 0x0131 - -struct keyspan_device_details { - /* product ID value */ - int product_id; - - enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format; - - /* Number of physical ports */ - int num_ports; - - /* 1 if endpoint flipping used on input, 0 if not */ - int indat_endp_flip; - - /* 1 if endpoint flipping used on output, 0 if not */ - int outdat_endp_flip; - - /* Table mapping input data endpoint IDs to physical - port number and flip if used */ - int indat_endpoints[KEYSPAN_MAX_NUM_PORTS]; - - /* Same for output endpoints */ - int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS]; - - /* Input acknowledge endpoints */ - int inack_endpoints[KEYSPAN_MAX_NUM_PORTS]; - - /* Output control endpoints */ - int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS]; - - /* Endpoint used for input status */ - int instat_endpoint; - - /* Endpoint used for input data 49WG only */ - int indat_endpoint; - - /* Endpoint used for global control functions */ - int glocont_endpoint; - - int (*calculate_baud_rate) (struct usb_serial_port *port, - u32 baud_rate, u32 baudclk, - u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); - u32 baudclk; -}; - -/* Now for each device type we setup the device detail - structure with the appropriate information (provided - in Keyspan's documentation) */ - -static const struct keyspan_device_details usa18x_device_details = { - .product_id = keyspan_usa18x_product_id, - .msg_format = msg_usa26, - .num_ports = 1, - .indat_endp_flip = 0, - .outdat_endp_flip = 1, - .indat_endpoints = {0x81}, - .outdat_endpoints = {0x01}, - .inack_endpoints = {0x85}, - .outcont_endpoints = {0x05}, - .instat_endpoint = 0x87, - .indat_endpoint = -1, - .glocont_endpoint = 0x07, - .calculate_baud_rate = keyspan_usa19w_calc_baud, - .baudclk = KEYSPAN_USA18X_BAUDCLK, -}; - -static const struct keyspan_device_details usa19_device_details = { - .product_id = keyspan_usa19_product_id, - .msg_format = msg_usa28, - .num_ports = 1, - .indat_endp_flip = 1, - .outdat_endp_flip = 1, - .indat_endpoints = {0x81}, - .outdat_endpoints = {0x01}, - .inack_endpoints = {0x83}, - .outcont_endpoints = {0x03}, - .instat_endpoint = 0x84, - .indat_endpoint = -1, - .glocont_endpoint = -1, - .calculate_baud_rate = keyspan_usa19_calc_baud, - .baudclk = KEYSPAN_USA19_BAUDCLK, -}; - -static const struct keyspan_device_details usa19qi_device_details = { - .product_id = keyspan_usa19qi_product_id, - .msg_format = msg_usa28, - .num_ports = 1, - .indat_endp_flip = 1, - .outdat_endp_flip = 1, - .indat_endpoints = {0x81}, - .outdat_endpoints = {0x01}, - .inack_endpoints = {0x83}, - .outcont_endpoints = {0x03}, - .instat_endpoint = 0x84, - .indat_endpoint = -1, - .glocont_endpoint = -1, - .calculate_baud_rate = keyspan_usa28_calc_baud, - .baudclk = KEYSPAN_USA19_BAUDCLK, -}; - -static const struct keyspan_device_details mpr_device_details = { - .product_id = keyspan_mpr_product_id, - .msg_format = msg_usa28, - .num_ports = 1, - .indat_endp_flip = 1, - .outdat_endp_flip = 1, - .indat_endpoints = {0x81}, - .outdat_endpoints = {0x01}, - .inack_endpoints = {0x83}, - .outcont_endpoints = {0x03}, - .instat_endpoint = 0x84, - .indat_endpoint = -1, - .glocont_endpoint = -1, - .calculate_baud_rate = keyspan_usa28_calc_baud, - .baudclk = KEYSPAN_USA19_BAUDCLK, -}; - -static const struct keyspan_device_details usa19qw_device_details = { - .product_id = keyspan_usa19qw_product_id, - .msg_format = msg_usa26, - .num_ports = 1, - .indat_endp_flip = 0, - .outdat_endp_flip = 1, - .indat_endpoints = {0x81}, - .outdat_endpoints = {0x01}, - .inack_endpoints = {0x85}, - .outcont_endpoints = {0x05}, - .instat_endpoint = 0x87, - .indat_endpoint = -1, - .glocont_endpoint = 0x07, - .calculate_baud_rate = keyspan_usa19w_calc_baud, - .baudclk = KEYSPAN_USA19W_BAUDCLK, -}; - -static const struct keyspan_device_details usa19w_device_details = { - .product_id = keyspan_usa19w_product_id, - .msg_format = msg_usa26, - .num_ports = 1, - .indat_endp_flip = 0, - .outdat_endp_flip = 1, - .indat_endpoints = {0x81}, - .outdat_endpoints = {0x01}, - .inack_endpoints = {0x85}, - .outcont_endpoints = {0x05}, - .instat_endpoint = 0x87, - .indat_endpoint = -1, - .glocont_endpoint = 0x07, - .calculate_baud_rate = keyspan_usa19w_calc_baud, - .baudclk = KEYSPAN_USA19W_BAUDCLK, -}; - -static const struct keyspan_device_details usa19hs_device_details = { - .product_id = keyspan_usa19hs_product_id, - .msg_format = msg_usa90, - .num_ports = 1, - .indat_endp_flip = 0, - .outdat_endp_flip = 0, - .indat_endpoints = {0x81}, - .outdat_endpoints = {0x01}, - .inack_endpoints = {-1}, - .outcont_endpoints = {0x02}, - .instat_endpoint = 0x82, - .indat_endpoint = -1, - .glocont_endpoint = -1, - .calculate_baud_rate = keyspan_usa19hs_calc_baud, - .baudclk = KEYSPAN_USA19HS_BAUDCLK, -}; - -static const struct keyspan_device_details usa28_device_details = { - .product_id = keyspan_usa28_product_id, - .msg_format = msg_usa28, - .num_ports = 2, - .indat_endp_flip = 1, - .outdat_endp_flip = 1, - .indat_endpoints = {0x81, 0x83}, - .outdat_endpoints = {0x01, 0x03}, - .inack_endpoints = {0x85, 0x86}, - .outcont_endpoints = {0x05, 0x06}, - .instat_endpoint = 0x87, - .indat_endpoint = -1, - .glocont_endpoint = 0x07, - .calculate_baud_rate = keyspan_usa28_calc_baud, - .baudclk = KEYSPAN_USA28_BAUDCLK, -}; - -static const struct keyspan_device_details usa28x_device_details = { - .product_id = keyspan_usa28x_product_id, - .msg_format = msg_usa26, - .num_ports = 2, - .indat_endp_flip = 0, - .outdat_endp_flip = 1, - .indat_endpoints = {0x81, 0x83}, - .outdat_endpoints = {0x01, 0x03}, - .inack_endpoints = {0x85, 0x86}, - .outcont_endpoints = {0x05, 0x06}, - .instat_endpoint = 0x87, - .indat_endpoint = -1, - .glocont_endpoint = 0x07, - .calculate_baud_rate = keyspan_usa19w_calc_baud, - .baudclk = KEYSPAN_USA28X_BAUDCLK, -}; - -static const struct keyspan_device_details usa28xa_device_details = { - .product_id = keyspan_usa28xa_product_id, - .msg_format = msg_usa26, - .num_ports = 2, - .indat_endp_flip = 0, - .outdat_endp_flip = 1, - .indat_endpoints = {0x81, 0x83}, - .outdat_endpoints = {0x01, 0x03}, - .inack_endpoints = {0x85, 0x86}, - .outcont_endpoints = {0x05, 0x06}, - .instat_endpoint = 0x87, - .indat_endpoint = -1, - .glocont_endpoint = 0x07, - .calculate_baud_rate = keyspan_usa19w_calc_baud, - .baudclk = KEYSPAN_USA28X_BAUDCLK, -}; - -static const struct keyspan_device_details usa28xg_device_details = { - .product_id = keyspan_usa28xg_product_id, - .msg_format = msg_usa67, - .num_ports = 2, - .indat_endp_flip = 0, - .outdat_endp_flip = 0, - .indat_endpoints = {0x84, 0x88}, - .outdat_endpoints = {0x02, 0x06}, - .inack_endpoints = {-1, -1}, - .outcont_endpoints = {-1, -1}, - .instat_endpoint = 0x81, - .indat_endpoint = -1, - .glocont_endpoint = 0x01, - .calculate_baud_rate = keyspan_usa19w_calc_baud, - .baudclk = KEYSPAN_USA28X_BAUDCLK, -}; -/* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */ - -static const struct keyspan_device_details usa49w_device_details = { - .product_id = keyspan_usa49w_product_id, - .msg_format = msg_usa49, - .num_ports = 4, - .indat_endp_flip = 0, - .outdat_endp_flip = 0, - .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, - .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, - .inack_endpoints = {-1, -1, -1, -1}, - .outcont_endpoints = {-1, -1, -1, -1}, - .instat_endpoint = 0x87, - .indat_endpoint = -1, - .glocont_endpoint = 0x07, - .calculate_baud_rate = keyspan_usa19w_calc_baud, - .baudclk = KEYSPAN_USA49W_BAUDCLK, -}; - -static const struct keyspan_device_details usa49wlc_device_details = { - .product_id = keyspan_usa49wlc_product_id, - .msg_format = msg_usa49, - .num_ports = 4, - .indat_endp_flip = 0, - .outdat_endp_flip = 0, - .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, - .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, - .inack_endpoints = {-1, -1, -1, -1}, - .outcont_endpoints = {-1, -1, -1, -1}, - .instat_endpoint = 0x87, - .indat_endpoint = -1, - .glocont_endpoint = 0x07, - .calculate_baud_rate = keyspan_usa19w_calc_baud, - .baudclk = KEYSPAN_USA19W_BAUDCLK, -}; - -static const struct keyspan_device_details usa49wg_device_details = { - .product_id = keyspan_usa49wg_product_id, - .msg_format = msg_usa49, - .num_ports = 4, - .indat_endp_flip = 0, - .outdat_endp_flip = 0, - .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */ - .outdat_endpoints = {0x01, 0x02, 0x04, 0x06}, - .inack_endpoints = {-1, -1, -1, -1}, - .outcont_endpoints = {-1, -1, -1, -1}, - .instat_endpoint = 0x81, - .indat_endpoint = 0x88, - .glocont_endpoint = 0x00, /* uses control EP */ - .calculate_baud_rate = keyspan_usa19w_calc_baud, - .baudclk = KEYSPAN_USA19W_BAUDCLK, -}; - -static const struct keyspan_device_details *keyspan_devices[] = { - &usa18x_device_details, - &usa19_device_details, - &usa19qi_device_details, - &mpr_device_details, - &usa19qw_device_details, - &usa19w_device_details, - &usa19hs_device_details, - &usa28_device_details, - &usa28x_device_details, - &usa28xa_device_details, - &usa28xg_device_details, - /* 28xb not required as it renumerates as a 28x */ - &usa49w_device_details, - &usa49wlc_device_details, - &usa49wg_device_details, - NULL, -}; - -static const struct usb_device_id keyspan_ids_combined[] = { - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)}, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, - { } /* Terminating entry */ -}; - -MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); - -/* usb_device_id table for the pre-firmware download keyspan devices */ -static const struct usb_device_id keyspan_pre_ids[] = { - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, - { } /* Terminating entry */ -}; - -static const struct usb_device_id keyspan_1port_ids[] = { - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, - { } /* Terminating entry */ -}; - -static const struct usb_device_id keyspan_2port_ids[] = { - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, - { } /* Terminating entry */ -}; - -static const struct usb_device_id keyspan_4port_ids[] = { - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, - { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, - { } /* Terminating entry */ -}; - -/* Structs for the devices, pre and post renumeration. */ -static struct usb_serial_driver keyspan_pre_device = { - .driver = { - .owner = THIS_MODULE, - .name = "keyspan_no_firm", - }, - .description = "Keyspan - (without firmware)", - .id_table = keyspan_pre_ids, - .num_ports = 1, - .attach = keyspan_fake_startup, -}; - -static struct usb_serial_driver keyspan_1port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "keyspan_1", - }, - .description = "Keyspan 1 port adapter", - .id_table = keyspan_1port_ids, - .num_ports = 1, - .open = keyspan_open, - .close = keyspan_close, - .dtr_rts = keyspan_dtr_rts, - .write = keyspan_write, - .write_room = keyspan_write_room, - .set_termios = keyspan_set_termios, - .break_ctl = keyspan_break_ctl, - .tiocmget = keyspan_tiocmget, - .tiocmset = keyspan_tiocmset, - .attach = keyspan_startup, - .disconnect = keyspan_disconnect, - .release = keyspan_release, - .port_probe = keyspan_port_probe, - .port_remove = keyspan_port_remove, -}; - -static struct usb_serial_driver keyspan_2port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "keyspan_2", - }, - .description = "Keyspan 2 port adapter", - .id_table = keyspan_2port_ids, - .num_ports = 2, - .open = keyspan_open, - .close = keyspan_close, - .dtr_rts = keyspan_dtr_rts, - .write = keyspan_write, - .write_room = keyspan_write_room, - .set_termios = keyspan_set_termios, - .break_ctl = keyspan_break_ctl, - .tiocmget = keyspan_tiocmget, - .tiocmset = keyspan_tiocmset, - .attach = keyspan_startup, - .disconnect = keyspan_disconnect, - .release = keyspan_release, - .port_probe = keyspan_port_probe, - .port_remove = keyspan_port_remove, -}; - -static struct usb_serial_driver keyspan_4port_device = { - .driver = { - .owner = THIS_MODULE, - .name = "keyspan_4", - }, - .description = "Keyspan 4 port adapter", - .id_table = keyspan_4port_ids, - .num_ports = 4, - .open = keyspan_open, - .close = keyspan_close, - .dtr_rts = keyspan_dtr_rts, - .write = keyspan_write, - .write_room = keyspan_write_room, - .set_termios = keyspan_set_termios, - .break_ctl = keyspan_break_ctl, - .tiocmget = keyspan_tiocmget, - .tiocmset = keyspan_tiocmset, - .attach = keyspan_startup, - .disconnect = keyspan_disconnect, - .release = keyspan_release, - .port_probe = keyspan_port_probe, - .port_remove = keyspan_port_remove, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &keyspan_pre_device, &keyspan_1port_device, - &keyspan_2port_device, &keyspan_4port_device, NULL -}; - -#endif -- cgit