From 9b835657827c94be64ed2101717a31ae668aaf5b Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 7 Dec 2020 15:23:59 +0000 Subject: net: sfp: extend bitrate-derived mode for 2500BASE-X Extend the bitrate-derived support to include 2500BASE-X for modules that report a bitrate of 2500Mbaud. Signed-off-by: Russell King --- drivers/net/phy/sfp-bus.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 20b91f5dfc6e..cdfa0a190962 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -337,11 +337,16 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, * the bitrate to determine supported modes. Some BiDi modules (eg, * 1310nm/1550nm) are not 1000BASE-BX compliant due to the differing * wavelengths, so do not set any transceiver bits. + * + * Do the same for modules supporting 2500BASE-X. Note that some + * modules use 2500Mbaud rather than 3100 or 3200Mbaud for + * 2500BASE-X, so we allow some slack here. */ - if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) { - /* If the bit rate allows 1000baseX */ - if (br_nom && br_min <= 1300 && br_max >= 1200) + if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS) && br_nom) { + if (br_min <= 1300 && br_max >= 1200) phylink_set(modes, 1000baseX_Full); + if (br_min <= 3200 && br_max >= 2500) + phylink_set(modes, 2500baseX_Full); } if (bus->sfp_quirk) -- cgit