From c2c1c66b5d4360debc9564d0aa11c873ed2e7aaa Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 23 Sep 2019 17:49:56 +0200 Subject: usb: Fix Kconfig indentation Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Acked-by: Johan Hovold Link: https://lore.kernel.org/r/20190923154956.6868-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/Kconfig | 4 +-- drivers/usb/gadget/legacy/Kconfig | 20 +++++------ drivers/usb/gadget/udc/Kconfig | 2 +- drivers/usb/host/Kconfig | 68 +++++++++++++++++++------------------- drivers/usb/misc/Kconfig | 8 ++--- drivers/usb/misc/sisusbvga/Kconfig | 2 +- drivers/usb/serial/Kconfig | 44 ++++++++++++------------ 7 files changed, 74 insertions(+), 74 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 89abc6078703..cc431376fcd0 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -103,7 +103,7 @@ config USB_DWC3_MESON_G12A default USB_DWC3 select USB_ROLE_SWITCH help - Support USB2/3 functionality in Amlogic G12A platforms. + Support USB2/3 functionality in Amlogic G12A platforms. Say 'Y' or 'M' if you have one such device. config USB_DWC3_OF_SIMPLE @@ -111,7 +111,7 @@ config USB_DWC3_OF_SIMPLE depends on OF && COMMON_CLK default USB_DWC3 help - Support USB2/3 functionality in simple SoC integrations. + Support USB2/3 functionality in simple SoC integrations. Currently supports Xilinx and Qualcomm DWC USB3 IP. Say 'Y' or 'M' if you have one such device. diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index 69ff7f8c86f5..38eaa9417b38 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -154,16 +154,16 @@ config USB_ETH_EEM select USB_LIBCOMPOSITE select USB_F_EEM help - CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM - and therefore can be supported by more hardware. Technically ECM and - EEM are designed for different applications. The ECM model extends - the network interface to the target (e.g. a USB cable modem), and the - EEM model is for mobile devices to communicate with hosts using - ethernet over USB. For Linux gadgets, however, the interface with - the host is the same (a usbX device), so the differences are minimal. - - If you say "y" here, the Ethernet gadget driver will use the EEM - protocol rather than ECM. If unsure, say "n". + CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM + and therefore can be supported by more hardware. Technically ECM and + EEM are designed for different applications. The ECM model extends + the network interface to the target (e.g. a USB cable modem), and the + EEM model is for mobile devices to communicate with hosts using + ethernet over USB. For Linux gadgets, however, the interface with + the host is the same (a usbX device), so the differences are minimal. + + If you say "y" here, the Ethernet gadget driver will use the EEM + protocol rather than ECM. If unsure, say "n". config USB_G_NCM tristate "Network Control Model (NCM) support" diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index d7e611645533..485c92ef888a 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -123,7 +123,7 @@ config USB_GR_UDC tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver" depends on HAS_DMA help - Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB + Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB VHDL IP core library. config USB_OMAP diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 79b2e79dddd0..d6164ede63d3 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -220,12 +220,12 @@ config USB_EHCI_HCD_ORION Marvell PXA/MMP USB controller" for those. config USB_EHCI_HCD_SPEAR - tristate "Support for ST SPEAr on-chip EHCI USB controller" - depends on USB_EHCI_HCD && PLAT_SPEAR - default y - ---help--- - Enables support for the on-chip EHCI controller on - ST SPEAr chips. + tristate "Support for ST SPEAr on-chip EHCI USB controller" + depends on USB_EHCI_HCD && PLAT_SPEAR + default y + ---help--- + Enables support for the on-chip EHCI controller on + ST SPEAr chips. config USB_EHCI_HCD_STI tristate "Support for ST STiHxxx on-chip EHCI USB controller" @@ -237,12 +237,12 @@ config USB_EHCI_HCD_STI STMicroelectronics consumer electronics SoC's. config USB_EHCI_HCD_AT91 - tristate "Support for Atmel on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_AT91 - default y - ---help--- - Enables support for the on-chip EHCI controller on - Atmel chips. + tristate "Support for Atmel on-chip EHCI USB controller" + depends on USB_EHCI_HCD && ARCH_AT91 + default y + ---help--- + Enables support for the on-chip EHCI controller on + Atmel chips. config USB_EHCI_TEGRA tristate "NVIDIA Tegra HCD support" @@ -250,8 +250,8 @@ config USB_EHCI_TEGRA select USB_EHCI_ROOT_HUB_TT select USB_TEGRA_PHY help - This driver enables support for the internal USB Host Controllers - found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. + This driver enables support for the internal USB Host Controllers + found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" @@ -409,12 +409,12 @@ config USB_OHCI_HCD_OMAP1 Enables support for the OHCI controller on OMAP1/2 chips. config USB_OHCI_HCD_SPEAR - tristate "Support for ST SPEAr on-chip OHCI USB controller" - depends on USB_OHCI_HCD && PLAT_SPEAR - default y - ---help--- - Enables support for the on-chip OHCI controller on - ST SPEAr chips. + tristate "Support for ST SPEAr on-chip OHCI USB controller" + depends on USB_OHCI_HCD && PLAT_SPEAR + default y + ---help--- + Enables support for the on-chip OHCI controller on + ST SPEAr chips. config USB_OHCI_HCD_STI tristate "Support for ST STiHxxx on-chip OHCI USB controller" @@ -426,12 +426,12 @@ config USB_OHCI_HCD_STI STMicroelectronics consumer electronics SoC's. config USB_OHCI_HCD_S3C2410 - tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) - default y - ---help--- - Enables support for the on-chip OHCI controller on - S3C24xx/S3C64xx chips. + tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" + depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) + default y + ---help--- + Enables support for the on-chip OHCI controller on + S3C24xx/S3C64xx chips. config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller" @@ -440,8 +440,8 @@ config USB_OHCI_HCD_LPC32XX depends on USB_ISP1301 default y ---help--- - Enables support for the on-chip OHCI controller on - NXP chips. + Enables support for the on-chip OHCI controller on + NXP chips. config USB_OHCI_HCD_PXA27X tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller" @@ -456,8 +456,8 @@ config USB_OHCI_HCD_AT91 depends on USB_OHCI_HCD && ARCH_AT91 && OF default y ---help--- - Enables support for the on-chip OHCI controller on - Atmel chips. + Enables support for the on-chip OHCI controller on + Atmel chips. config USB_OHCI_HCD_OMAP3 tristate "OHCI support for OMAP3 and later chips" @@ -716,11 +716,11 @@ config USB_IMX21_HCD tristate "i.MX21 HCD support" depends on ARM && ARCH_MXC help - This driver enables support for the on-chip USB host in the - i.MX21 processor. + This driver enables support for the on-chip USB host in the + i.MX21 processor. - To compile this driver as a module, choose M here: the - module will be called "imx21-hcd". + To compile this driver as a module, choose M here: the + module will be called "imx21-hcd". config USB_HCD_BCMA tristate "BCMA usb host driver" diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index bdae62b2ffe0..664d27bb6086 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -191,8 +191,8 @@ config USB_TEST including sample test device firmware and "how to use it". config USB_EHSET_TEST_FIXTURE - tristate "USB EHSET Test Fixture driver" - help + tristate "USB EHSET Test Fixture driver" + help Say Y here if you want to support the special test fixture device used for the USB-IF Embedded Host High-Speed Electrical Test procedure. @@ -247,13 +247,13 @@ config USB_HSIC_USB3503 depends on I2C select REGMAP_I2C help - This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. + This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. config USB_HSIC_USB4604 tristate "USB4604 HSIC to USB20 Driver" depends on I2C help - This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. + This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. config USB_LINK_LAYER_TEST tristate "USB Link Layer Test driver" diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig index 9b632ab24f03..c16121276a21 100644 --- a/drivers/usb/misc/sisusbvga/Kconfig +++ b/drivers/usb/misc/sisusbvga/Kconfig @@ -4,7 +4,7 @@ config USB_SISUSBVGA tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)" depends on (USB_MUSB_HDRC || USB_EHCI_HCD) select FONT_SUPPORT if USB_SISUSBVGA_CON - ---help--- + ---help--- Say Y here if you intend to attach a USB2VGA dongle based on a Net2280 and a SiS315 chip. diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 67279c6bce33..0a8c16a8cda2 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -271,17 +271,17 @@ config USB_SERIAL_F8153X config USB_SERIAL_GARMIN tristate "USB Garmin GPS driver" help - Say Y here if you want to connect to your Garmin GPS. - Should work with most Garmin GPS devices which have a native USB port. + Say Y here if you want to connect to your Garmin GPS. + Should work with most Garmin GPS devices which have a native USB port. - See for the latest - version of the driver. + See for the latest + version of the driver. - To compile this driver as a module, choose M here: the - module will be called garmin_gps. + To compile this driver as a module, choose M here: the + module will be called garmin_gps. config USB_SERIAL_IPW - tristate "USB IPWireless (3G UMTS TDD) Driver" + tristate "USB IPWireless (3G UMTS TDD) Driver" select USB_SERIAL_WWAN help Say Y here if you want to use a IPWireless USB modem such as @@ -341,20 +341,20 @@ config USB_SERIAL_KLSI module will be called kl5kusb105. config USB_SERIAL_KOBIL_SCT - tristate "USB KOBIL chipcard reader" - ---help--- - Say Y here if you want to use one of the following KOBIL USB chipcard - readers: - - - USB TWIN - - KAAN Standard Plus - - KAAN SIM - - SecOVID Reader Plus - - B1 Professional - - KAAN Professional - - Note that you need a current CT-API. - To compile this driver as a module, choose M here: the + tristate "USB KOBIL chipcard reader" + ---help--- + Say Y here if you want to use one of the following KOBIL USB chipcard + readers: + + - USB TWIN + - KAAN Standard Plus + - KAAN SIM + - SecOVID Reader Plus + - B1 Professional + - KAAN Professional + + Note that you need a current CT-API. + To compile this driver as a module, choose M here: the module will be called kobil_sct. config USB_SERIAL_MCT_U232 @@ -458,7 +458,7 @@ config USB_SERIAL_OTI6858 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" help Say Y here if you want to use the OTi-6858 single port USB to serial - converter device. + converter device. To compile this driver as a module, choose M here: the module will be called oti6858. -- cgit