From 6c3796d130ed2860489885a934dcb7bb334d5eb0 Mon Sep 17 00:00:00 2001 From: "bstroesser@ts.fujitsu.com" Date: Thu, 24 May 2018 18:49:41 +0200 Subject: scsi: target: tcmu: add read length support Generally target core and TCMUser seem to work fine for tape devices and media changers. But there is at least one situation where TCMUser is not able to support sequential access device emulation correctly. The situation is when an initiator sends a SCSI READ CDB with a length that is greater than the length of the tape block to read. We can distinguish two subcases: A) The initiator sent the READ CDB with the SILI bit being set. In this case the sequential access device has to transfer the data from the tape block (only the length of the tape block) and transmit a good status. The current interface between TCMUser and the userspace does not support reduction of the read data size by the userspace program. The patch below fixes this subcase by allowing the userspace program to specify a reduced data size in read direction. B) The initiator sent the READ CDB with the SILI bit not being set. In this case the sequential access device has to transfer the data from the tape block as in A), but additionally has to transmit CHECK CONDITION with the ILI bit set and NO SENSE in the sensebytes. The information field in the sensebytes must contain the residual count. With the below patch a user space program can specify the real read data length and appropriate sensebytes. TCMUser then uses the se_cmd flag SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data size and the sensebytes. Note: the flag SCF_TREAT_READ_AS_NORMAL is introduced by Lee Duncan's patch "[PATCH v4] target: transport should handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700. Signed-off-by: Bodo Stroesser Acked-by: Mike Christie Reviewed-by: Lee Duncan Signed-off-by: Martin K. Petersen --- drivers/target/target_core_user.c | 44 ++++++++++++++++++++++++++++++++------- 1 file changed, 36 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 7f96dfa32b9c..d8dc3d22051f 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -656,7 +656,7 @@ static void scatter_data_area(struct tcmu_dev *udev, } static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, - bool bidi) + bool bidi, uint32_t read_len) { struct se_cmd *se_cmd = cmd->se_cmd; int i, dbi; @@ -689,7 +689,7 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, for_each_sg(data_sg, sg, data_nents, i) { int sg_remaining = sg->length; to = kmap_atomic(sg_page(sg)) + sg->offset; - while (sg_remaining > 0) { + while (sg_remaining > 0 && read_len > 0) { if (block_remaining == 0) { if (from) kunmap_atomic(from); @@ -701,6 +701,8 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, } copy_bytes = min_t(size_t, sg_remaining, block_remaining); + if (read_len < copy_bytes) + copy_bytes = read_len; offset = DATA_BLOCK_SIZE - block_remaining; tcmu_flush_dcache_range(from, copy_bytes); memcpy(to + sg->length - sg_remaining, from + offset, @@ -708,8 +710,11 @@ static void gather_data_area(struct tcmu_dev *udev, struct tcmu_cmd *cmd, sg_remaining -= copy_bytes; block_remaining -= copy_bytes; + read_len -= copy_bytes; } kunmap_atomic(to - sg->offset); + if (read_len == 0) + break; } if (from) kunmap_atomic(from); @@ -1042,6 +1047,8 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * { struct se_cmd *se_cmd = cmd->se_cmd; struct tcmu_dev *udev = cmd->tcmu_dev; + bool read_len_valid = false; + uint32_t read_len = se_cmd->data_length; /* * cmd has been completed already from timeout, just reclaim @@ -1056,13 +1063,28 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * pr_warn("TCMU: Userspace set UNKNOWN_OP flag on se_cmd %p\n", cmd->se_cmd); entry->rsp.scsi_status = SAM_STAT_CHECK_CONDITION; - } else if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) { + goto done; + } + + if (se_cmd->data_direction == DMA_FROM_DEVICE && + (entry->hdr.uflags & TCMU_UFLAG_READ_LEN) && entry->rsp.read_len) { + read_len_valid = true; + if (entry->rsp.read_len < read_len) + read_len = entry->rsp.read_len; + } + + if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) { transport_copy_sense_to_cmd(se_cmd, entry->rsp.sense_buffer); - } else if (se_cmd->se_cmd_flags & SCF_BIDI) { + if (!read_len_valid ) + goto done; + else + se_cmd->se_cmd_flags |= SCF_TREAT_READ_AS_NORMAL; + } + if (se_cmd->se_cmd_flags & SCF_BIDI) { /* Get Data-In buffer before clean up */ - gather_data_area(udev, cmd, true); + gather_data_area(udev, cmd, true, read_len); } else if (se_cmd->data_direction == DMA_FROM_DEVICE) { - gather_data_area(udev, cmd, false); + gather_data_area(udev, cmd, false, read_len); } else if (se_cmd->data_direction == DMA_TO_DEVICE) { /* TODO: */ } else if (se_cmd->data_direction != DMA_NONE) { @@ -1070,7 +1092,13 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry * se_cmd->data_direction); } - target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status); +done: + if (read_len_valid) { + pr_debug("read_len = %d\n", read_len); + target_complete_cmd_with_length(cmd->se_cmd, + entry->rsp.scsi_status, read_len); + } else + target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status); out: cmd->se_cmd = NULL; @@ -1740,7 +1768,7 @@ static int tcmu_configure_device(struct se_device *dev) /* Initialise the mailbox of the ring buffer */ mb = udev->mb_addr; mb->version = TCMU_MAILBOX_VERSION; - mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC; + mb->flags = TCMU_MAILBOX_FLAG_CAP_OOOC | TCMU_MAILBOX_FLAG_CAP_READ_LEN; mb->cmdr_off = CMDR_OFF; mb->cmdr_size = udev->cmdr_size; -- cgit From f2233a33dc1fef4aa30dc11e4c676637bf358c3d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 19 Mar 2018 22:50:05 -0400 Subject: scsi: ipr: Eliminate duplicate barriers Driver does both wmb() and writel(). The latter already has a barrier on some architectures like arm64. This ends up with CPU observing two barriers back to back before executing the register write. Drivers should generally assume that the barrier implied by writel() is sufficient for ordering DMA. Remove the extraneous wmb() before it. [mkp: Squashed Arnd's and Sinan's patches] Signed-off-by: Arnd Bergmann Reported-by: Sinan Kaya Acked-by: Brian King Signed-off-by: Martin K. Petersen --- drivers/scsi/ipr.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 0a9b8b387bd2..02d65dce74e5 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -760,7 +760,6 @@ static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg, ioa_cfg->hrrq[i].allow_interrupts = 0; spin_unlock(&ioa_cfg->hrrq[i]._lock); } - wmb(); /* Set interrupt mask to stop all new interrupts */ if (ioa_cfg->sis64) @@ -8403,7 +8402,6 @@ static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd) ioa_cfg->hrrq[i].allow_interrupts = 1; spin_unlock(&ioa_cfg->hrrq[i]._lock); } - wmb(); if (ioa_cfg->sis64) { /* Set the adapter to the correct endian mode. */ writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg); -- cgit From 49d7bd36813ea8e6b4c97b640d24e7fbd44c84f0 Mon Sep 17 00:00:00 2001 From: Mikhail Malygin Date: Wed, 13 Jun 2018 13:05:57 +0000 Subject: scsi: qla2xxx: Spinlock recursion in qla_target The patch reverts changes done in qlt_schedule_sess_for_deletion() to avoid spinlock recursion sess->vha->work_lock should be used instead of ha->tgt.sess_lock, that can be locked in callers: qlt_reset() or qlt_handle_login() [mkp: roll in build warning reported by sfr] Fixes: 1c6cacf4ea6c04 ("scsi: qla2xxx: Fixup locking for session deletion") Cc: #v4.17 Signed-off-by: Mikhail Malygin Reported-by: Mikhail Malygin Tested-by: Mikhail Malygin Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_target.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 0fea2e2326be..1027b0cb7fa3 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1224,7 +1224,6 @@ static void qla24xx_chk_fcp_state(struct fc_port *sess) void qlt_schedule_sess_for_deletion(struct fc_port *sess) { struct qla_tgt *tgt = sess->tgt; - struct qla_hw_data *ha = sess->vha->hw; unsigned long flags; if (sess->disc_state == DSC_DELETE_PEND) @@ -1241,16 +1240,16 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess) return; } - spin_lock_irqsave(&ha->tgt.sess_lock, flags); if (sess->deleted == QLA_SESS_DELETED) sess->logout_on_delete = 0; + spin_lock_irqsave(&sess->vha->work_lock, flags); if (sess->deleted == QLA_SESS_DELETION_IN_PROGRESS) { - spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); + spin_unlock_irqrestore(&sess->vha->work_lock, flags); return; } sess->deleted = QLA_SESS_DELETION_IN_PROGRESS; - spin_unlock_irqrestore(&ha->tgt.sess_lock, flags); + spin_unlock_irqrestore(&sess->vha->work_lock, flags); sess->disc_state = DSC_DELETE_PEND; -- cgit From 52ab9768f723823a71dc659f0fad803a90f80236 Mon Sep 17 00:00:00 2001 From: Luis Henriques Date: Mon, 18 Jun 2018 17:08:03 +0100 Subject: scsi: scsi_debug: Fix memory leak on module unload Since commit 80c49563e250 ("scsi: scsi_debug: implement IMMED bit") there are long delays in F_SYNC_DELAY and F_SSU_DELAY. This can cause a memory leak in schedule_resp(), which can be invoked while unloading the scsi_debug module: free_all_queued() had already freed all sd_dp and schedule_resp will alloc a new one, which will never get freed. Here's the kmemleak report while running xfstests generic/350: unreferenced object 0xffff88007d752b00 (size 128): comm "rmmod", pid 26940, jiffies 4295816945 (age 7.588s) hex dump (first 32 bytes): 00 2b 75 7d 00 88 ff ff 00 00 00 00 00 00 00 00 .+u}............ 00 00 00 00 00 00 00 00 8e 31 a2 34 5f 03 00 00 .........1.4_... backtrace: [<000000002abd83d0>] 0xffffffffa000705e [<000000004c063fda>] scsi_dispatch_cmd+0xc7/0x1a0 [<000000000c119a00>] scsi_request_fn+0x251/0x550 [<000000009de0c736>] __blk_run_queue+0x3f/0x60 [<000000001c4453c8>] blk_execute_rq_nowait+0x98/0xd0 [<00000000d17ec79f>] blk_execute_rq+0x3a/0x50 [<00000000a7654b6e>] scsi_execute+0x113/0x250 [<00000000fd78f7cd>] sd_sync_cache+0x95/0x160 [<0000000024dacb14>] sd_shutdown+0x9b/0xd0 [<00000000e9101710>] sd_remove+0x5f/0xb0 [<00000000c43f0d63>] device_release_driver_internal+0x13c/0x1f0 [<00000000e8ad57b6>] bus_remove_device+0xe9/0x160 [<00000000713a7b8a>] device_del+0x120/0x320 [<00000000e5db670c>] __scsi_remove_device+0x115/0x150 [<00000000eccbef30>] scsi_forget_host+0x20/0x60 [<00000000cd5a0738>] scsi_remove_host+0x6d/0x120 Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Luis Henriques Acked-by: Douglas Gilbert Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 24d7496cd9e2..364e71861bfd 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -5507,9 +5507,9 @@ static void __exit scsi_debug_exit(void) int k = sdebug_add_host; stop_all_queued(); - free_all_queued(); for (; k; k--) sdebug_remove_adapter(); + free_all_queued(); driver_unregister(&sdebug_driverfs_driver); bus_unregister(&pseudo_lld_bus); root_device_unregister(pseudo_primary); -- cgit