From df8c847b53539cc1b05cf3bd8f446194aedfeafc Mon Sep 17 00:00:00 2001 From: Pierre-Yves MORDRET Date: Thu, 14 Sep 2017 16:28:36 +0200 Subject: i2c: i2c-stm32f4: use generic definition of speed enum This patch uses a more generic definition of speed enum for i2c-stm32f4 driver. Signed-off-by: M'boumba Cedric Madianga Signed-off-by: Pierre-Yves MORDRET Reviewed-by: Ludovic BARRE Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-stm32.h | 20 ++++++++++++++++++++ drivers/i2c/busses/i2c-stm32f4.c | 18 +++++++----------- 2 files changed, 27 insertions(+), 11 deletions(-) create mode 100644 drivers/i2c/busses/i2c-stm32.h (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-stm32.h b/drivers/i2c/busses/i2c-stm32.h new file mode 100644 index 000000000000..dab51761f8c5 --- /dev/null +++ b/drivers/i2c/busses/i2c-stm32.h @@ -0,0 +1,20 @@ +/* + * i2c-stm32.h + * + * Copyright (C) M'boumba Cedric Madianga 2017 + * Author: M'boumba Cedric Madianga + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _I2C_STM32_H +#define _I2C_STM32_H + +enum stm32_i2c_speed { + STM32_I2C_SPEED_STANDARD, /* 100 kHz */ + STM32_I2C_SPEED_FAST, /* 400 kHz */ + STM32_I2C_SPEED_FAST_PLUS, /* 1 MHz */ + STM32_I2C_SPEED_END, +}; + +#endif /* _I2C_STM32_H */ diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c index aceb6f788564..4ec108496f15 100644 --- a/drivers/i2c/busses/i2c-stm32f4.c +++ b/drivers/i2c/busses/i2c-stm32f4.c @@ -27,6 +27,8 @@ #include #include +#include "i2c-stm32.h" + /* STM32F4 I2C offset registers */ #define STM32F4_I2C_CR1 0x00 #define STM32F4_I2C_CR2 0x04 @@ -90,12 +92,6 @@ #define STM32F4_I2C_MAX_FREQ 46U #define HZ_TO_MHZ 1000000 -enum stm32f4_i2c_speed { - STM32F4_I2C_SPEED_STANDARD, /* 100 kHz */ - STM32F4_I2C_SPEED_FAST, /* 400 kHz */ - STM32F4_I2C_SPEED_END, -}; - /** * struct stm32f4_i2c_msg - client specific data * @addr: 8-bit slave addr, including r/w bit @@ -159,7 +155,7 @@ static int stm32f4_i2c_set_periph_clk_freq(struct stm32f4_i2c_dev *i2c_dev) i2c_dev->parent_rate = clk_get_rate(i2c_dev->clk); freq = DIV_ROUND_UP(i2c_dev->parent_rate, HZ_TO_MHZ); - if (i2c_dev->speed == STM32F4_I2C_SPEED_STANDARD) { + if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD) { /* * To reach 100 kHz, the parent clk frequency should be between * a minimum value of 2 MHz and a maximum value of 46 MHz due @@ -216,7 +212,7 @@ static void stm32f4_i2c_set_rise_time(struct stm32f4_i2c_dev *i2c_dev) * is not higher than 46 MHz . As a result trise is at most 4 bits wide * and so fits into the TRISE bits [5:0]. */ - if (i2c_dev->speed == STM32F4_I2C_SPEED_STANDARD) + if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD) trise = freq + 1; else trise = freq * 3 / 10 + 1; @@ -230,7 +226,7 @@ static void stm32f4_i2c_set_speed_mode(struct stm32f4_i2c_dev *i2c_dev) u32 val; u32 ccr = 0; - if (i2c_dev->speed == STM32F4_I2C_SPEED_STANDARD) { + if (i2c_dev->speed == STM32_I2C_SPEED_STANDARD) { /* * In standard mode: * t_scl_high = t_scl_low = CCR * I2C parent clk period @@ -808,10 +804,10 @@ static int stm32f4_i2c_probe(struct platform_device *pdev) udelay(2); reset_control_deassert(rst); - i2c_dev->speed = STM32F4_I2C_SPEED_STANDARD; + i2c_dev->speed = STM32_I2C_SPEED_STANDARD; ret = of_property_read_u32(np, "clock-frequency", &clk_rate); if (!ret && clk_rate >= 400000) - i2c_dev->speed = STM32F4_I2C_SPEED_FAST; + i2c_dev->speed = STM32_I2C_SPEED_FAST; i2c_dev->dev = &pdev->dev; -- cgit