From 1b5df59e50874b9034c0fa389cd52b65f1f93292 Mon Sep 17 00:00:00 2001 From: Vaibhav Jain Date: Mon, 16 Nov 2015 09:33:45 +0530 Subject: cxl: Fix possible idr warning when contexts are released An idr warning is reported when a context is release after the capi card is unbound from the cxl driver via sysfs. Below are the steps to reproduce: 1. Create multiple afu contexts in an user-space application using libcxl. 2. Unbind capi card from cxl using command of form echo > /sys/bus/pci/drivers/cxl-pci/unbind 3. Exit/kill the application owning afu contexts. After above steps a warning message is usually seen in the kernel logs of the form "idr_remove called for id= which is not allocated." This is caused by the function cxl_release_afu which destroys the contexts_idr table. So when a context is release no entry for context pe is found in the contexts_idr table and idr code prints this warning. This patch fixes this issue by increasing & decreasing the ref-count on the afu device when a context is initialized or when its freed respectively. This prevents the afu from being released until all the afu contexts have been released. The patch introduces two new functions namely cxl_afu_get/put that manage the ref-count on the afu device. Also the patch removes code inside cxl_dev_context_init that increases ref on the afu device as its guaranteed to be alive during this function. Reported-by: Ian Munsie Signed-off-by: Vaibhav Jain Acked-by: Ian Munsie Signed-off-by: Michael Ellerman --- drivers/misc/cxl/api.c | 4 ---- drivers/misc/cxl/context.c | 9 +++++++++ drivers/misc/cxl/cxl.h | 12 ++++++++++++ drivers/misc/cxl/file.c | 19 +++++++++++-------- 4 files changed, 32 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c index 103baf0e0c5b..a6543aefa299 100644 --- a/drivers/misc/cxl/api.c +++ b/drivers/misc/cxl/api.c @@ -25,7 +25,6 @@ struct cxl_context *cxl_dev_context_init(struct pci_dev *dev) afu = cxl_pci_to_afu(dev); - get_device(&afu->dev); ctx = cxl_context_alloc(); if (IS_ERR(ctx)) { rc = PTR_ERR(ctx); @@ -61,7 +60,6 @@ err_mapping: err_ctx: kfree(ctx); err_dev: - put_device(&afu->dev); return ERR_PTR(rc); } EXPORT_SYMBOL_GPL(cxl_dev_context_init); @@ -87,8 +85,6 @@ int cxl_release_context(struct cxl_context *ctx) if (ctx->status >= STARTED) return -EBUSY; - put_device(&ctx->afu->dev); - cxl_context_free(ctx); return 0; diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c index 2faa1270d085..6dde7a9d6a7e 100644 --- a/drivers/misc/cxl/context.c +++ b/drivers/misc/cxl/context.c @@ -97,6 +97,12 @@ int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master, ctx->pe = i; ctx->elem = &ctx->afu->spa[i]; ctx->pe_inserted = false; + + /* + * take a ref on the afu so that it stays alive at-least till + * this context is reclaimed inside reclaim_ctx. + */ + cxl_afu_get(afu); return 0; } @@ -278,6 +284,9 @@ static void reclaim_ctx(struct rcu_head *rcu) if (ctx->irq_bitmap) kfree(ctx->irq_bitmap); + /* Drop ref to the afu device taken during cxl_context_init */ + cxl_afu_put(ctx->afu); + kfree(ctx); } diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h index 0cfb9c129f27..25ae57fa79b0 100644 --- a/drivers/misc/cxl/cxl.h +++ b/drivers/misc/cxl/cxl.h @@ -403,6 +403,18 @@ struct cxl_afu { bool enabled; }; +/* AFU refcount management */ +static inline struct cxl_afu *cxl_afu_get(struct cxl_afu *afu) +{ + + return (get_device(&afu->dev) == NULL) ? NULL : afu; +} + +static inline void cxl_afu_put(struct cxl_afu *afu) +{ + put_device(&afu->dev); +} + struct cxl_irq_name { struct list_head list; diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c index 7ccd2998be92..5cc14599837d 100644 --- a/drivers/misc/cxl/file.c +++ b/drivers/misc/cxl/file.c @@ -67,7 +67,13 @@ static int __afu_open(struct inode *inode, struct file *file, bool master) spin_unlock(&adapter->afu_list_lock); goto err_put_adapter; } - get_device(&afu->dev); + + /* + * taking a ref to the afu so that it doesn't go away + * for rest of the function. This ref is released before + * we return. + */ + cxl_afu_get(afu); spin_unlock(&adapter->afu_list_lock); if (!afu->current_mode) @@ -90,13 +96,12 @@ static int __afu_open(struct inode *inode, struct file *file, bool master) file->private_data = ctx; cxl_ctx_get(); - /* Our ref on the AFU will now hold the adapter */ - put_device(&adapter->dev); - - return 0; + /* indicate success */ + rc = 0; err_put_afu: - put_device(&afu->dev); + /* release the ref taken earlier */ + cxl_afu_put(afu); err_put_adapter: put_device(&adapter->dev); return rc; @@ -131,8 +136,6 @@ int afu_release(struct inode *inode, struct file *file) mutex_unlock(&ctx->mapping_lock); } - put_device(&ctx->afu->dev); - /* * At this this point all bottom halfs have finished and we should be * getting no more IRQs from the hardware for this context. Once it's -- cgit From 48f0f6b717e314a30be121b67e1d044f6d311d66 Mon Sep 17 00:00:00 2001 From: Andrew Donnellan Date: Wed, 4 Nov 2015 13:24:09 +1100 Subject: cxl: use correct operator when writing pcie config space values When writing a value to config space, cxl_pcie_write_config() calls cxl_pcie_config_info() to obtain a mask and shift value, shifts the new value accordingly, then uses the mask to combine the shifted value with the existing value at the address as part of a read-modify-write pattern. Currently, we use a logical OR operator rather than a bitwise OR operator, which means any use of this function results in an incorrect value being written. Replace the logical OR operator with a bitwise OR operator so the value is written correctly. Reported-by: Michael Ellerman Cc: stable@vger.kernel.org Fixes: 6f7f0b3df6d4 ("cxl: Add AFU virtual PHB and kernel API") Signed-off-by: Andrew Donnellan Acked-by: Ian Munsie Signed-off-by: Michael Ellerman --- drivers/misc/cxl/vphb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c index c241e15cacb1..cbd4331fb45c 100644 --- a/drivers/misc/cxl/vphb.c +++ b/drivers/misc/cxl/vphb.c @@ -203,7 +203,7 @@ static int cxl_pcie_write_config(struct pci_bus *bus, unsigned int devfn, mask <<= shift; val <<= shift; - v = (in_le32(ioaddr) & ~mask) || (val & mask); + v = (in_le32(ioaddr) & ~mask) | (val & mask); out_le32(ioaddr, v); return PCIBIOS_SUCCESSFUL; -- cgit From 6c3082151e13846fd872cc216e8cbb5a59cd0b12 Mon Sep 17 00:00:00 2001 From: John Ogness Date: Wed, 11 Nov 2015 15:15:03 +0100 Subject: powerpc/powermac: IRQF_NO_SUSPEND not IRQF_TIMER for non-timer Since gpio1 is not a timer, it also should not use IRQF_TIMER. Similar to commit ba461f094bab ("powerpc: Use IRQF_NO_SUSPEND not IRQF_TIMER for non-timer interrupts"). Signed-off-by: John Ogness Signed-off-by: Michael Ellerman --- drivers/macintosh/via-pmu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index f9512bfa6c3c..01ee736fe0ef 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -425,8 +425,9 @@ static int __init via_pmu_start(void) gpio_irq = irq_of_parse_and_map(gpio_node, 0); if (gpio_irq != NO_IRQ) { - if (request_irq(gpio_irq, gpio1_interrupt, IRQF_TIMER, - "GPIO1 ADB", (void *)0)) + if (request_irq(gpio_irq, gpio1_interrupt, + IRQF_NO_SUSPEND, "GPIO1 ADB", + (void *)0)) printk(KERN_ERR "pmu: can't get irq %d" " (GPIO1)\n", gpio_irq); else -- cgit From 6735b2e985b78e0ecb05e8818c22f46b904f3599 Mon Sep 17 00:00:00 2001 From: Luis de Bethencourt Date: Tue, 20 Oct 2015 16:13:53 +0100 Subject: powerpc/rackmeter: Fix module autoload for OF platform driver This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt Signed-off-by: Michael Ellerman --- drivers/macintosh/rack-meter.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c index 048901a1111a..caaec654d7ea 100644 --- a/drivers/macintosh/rack-meter.c +++ b/drivers/macintosh/rack-meter.c @@ -582,6 +582,7 @@ static struct of_device_id rackmeter_match[] = { { .name = "i2s" }, { } }; +MODULE_DEVICE_TABLE(of, rackmeter_match); static struct macio_driver rackmeter_driver = { .driver = { -- cgit From 1552cd703cf5a07caeb17ccd82f80e20a23b1707 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 29 Oct 2015 11:44:03 +1100 Subject: crypto: vmx: Only call enable_kernel_vsx() With the recent change to enable_kernel_vsx(), we no longer need to call enable_kernel_fp() and enable_kernel_altivec(). Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman --- drivers/crypto/vmx/aes.c | 3 --- drivers/crypto/vmx/aes_cbc.c | 3 --- drivers/crypto/vmx/aes_ctr.c | 3 --- drivers/crypto/vmx/ghash.c | 8 -------- 4 files changed, 17 deletions(-) (limited to 'drivers') diff --git a/drivers/crypto/vmx/aes.c b/drivers/crypto/vmx/aes.c index 263af709e536..20539fb7e975 100644 --- a/drivers/crypto/vmx/aes.c +++ b/drivers/crypto/vmx/aes.c @@ -83,7 +83,6 @@ static int p8_aes_setkey(struct crypto_tfm *tfm, const u8 *key, preempt_disable(); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); ret += aes_p8_set_decrypt_key(key, keylen * 8, &ctx->dec_key); @@ -103,7 +102,6 @@ static void p8_aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) } else { preempt_disable(); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); aes_p8_encrypt(src, dst, &ctx->enc_key); pagefault_enable(); @@ -120,7 +118,6 @@ static void p8_aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) } else { preempt_disable(); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); aes_p8_decrypt(src, dst, &ctx->dec_key); pagefault_enable(); diff --git a/drivers/crypto/vmx/aes_cbc.c b/drivers/crypto/vmx/aes_cbc.c index 0b8fe2ec5315..8847b92e9ff0 100644 --- a/drivers/crypto/vmx/aes_cbc.c +++ b/drivers/crypto/vmx/aes_cbc.c @@ -84,7 +84,6 @@ static int p8_aes_cbc_setkey(struct crypto_tfm *tfm, const u8 *key, preempt_disable(); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); ret += aes_p8_set_decrypt_key(key, keylen * 8, &ctx->dec_key); @@ -115,7 +114,6 @@ static int p8_aes_cbc_encrypt(struct blkcipher_desc *desc, } else { preempt_disable(); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); blkcipher_walk_init(&walk, dst, src, nbytes); @@ -156,7 +154,6 @@ static int p8_aes_cbc_decrypt(struct blkcipher_desc *desc, } else { preempt_disable(); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); blkcipher_walk_init(&walk, dst, src, nbytes); diff --git a/drivers/crypto/vmx/aes_ctr.c b/drivers/crypto/vmx/aes_ctr.c index ee1306cd8f59..80958660c31a 100644 --- a/drivers/crypto/vmx/aes_ctr.c +++ b/drivers/crypto/vmx/aes_ctr.c @@ -81,7 +81,6 @@ static int p8_aes_ctr_setkey(struct crypto_tfm *tfm, const u8 *key, struct p8_aes_ctr_ctx *ctx = crypto_tfm_ctx(tfm); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); pagefault_enable(); @@ -100,7 +99,6 @@ static void p8_aes_ctr_final(struct p8_aes_ctr_ctx *ctx, unsigned int nbytes = walk->nbytes; pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); aes_p8_encrypt(ctrblk, keystream, &ctx->enc_key); pagefault_enable(); @@ -133,7 +131,6 @@ static int p8_aes_ctr_crypt(struct blkcipher_desc *desc, ret = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE); while ((nbytes = walk.nbytes) >= AES_BLOCK_SIZE) { pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); aes_p8_ctr32_encrypt_blocks(walk.src.virt.addr, walk.dst.virt.addr, diff --git a/drivers/crypto/vmx/ghash.c b/drivers/crypto/vmx/ghash.c index 2183a2e77641..1f4586c2fd25 100644 --- a/drivers/crypto/vmx/ghash.c +++ b/drivers/crypto/vmx/ghash.c @@ -118,9 +118,7 @@ static int p8_ghash_setkey(struct crypto_shash *tfm, const u8 *key, preempt_disable(); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); - enable_kernel_fp(); gcm_init_p8(ctx->htable, (const u64 *) key); pagefault_enable(); preempt_enable(); @@ -149,9 +147,7 @@ static int p8_ghash_update(struct shash_desc *desc, GHASH_DIGEST_SIZE - dctx->bytes); preempt_disable(); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); - enable_kernel_fp(); gcm_ghash_p8(dctx->shash, ctx->htable, dctx->buffer, GHASH_DIGEST_SIZE); pagefault_enable(); @@ -164,9 +160,7 @@ static int p8_ghash_update(struct shash_desc *desc, if (len) { preempt_disable(); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); - enable_kernel_fp(); gcm_ghash_p8(dctx->shash, ctx->htable, src, len); pagefault_enable(); preempt_enable(); @@ -195,9 +189,7 @@ static int p8_ghash_final(struct shash_desc *desc, u8 *out) dctx->buffer[i] = 0; preempt_disable(); pagefault_disable(); - enable_kernel_altivec(); enable_kernel_vsx(); - enable_kernel_fp(); gcm_ghash_p8(dctx->shash, ctx->htable, dctx->buffer, GHASH_DIGEST_SIZE); pagefault_enable(); -- cgit From dc4fbba11e4661a6a77a1f89ba32f9082e6395ff Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 29 Oct 2015 11:44:05 +1100 Subject: powerpc: Create disable_kernel_{fp,altivec,vsx,spe}() The enable_kernel_*() functions leave the relevant MSR bits enabled until we exit the kernel sometime later. Create disable versions that wrap the kernel use of FP, Altivec VSX or SPE. While we don't want to disable it normally for performance reasons (MSR writes are slow), it will be used for a debug boot option that does this and catches bad uses in other areas of the kernel. Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman --- drivers/crypto/vmx/aes.c | 3 +++ drivers/crypto/vmx/aes_cbc.c | 3 +++ drivers/crypto/vmx/aes_ctr.c | 3 +++ drivers/crypto/vmx/ghash.c | 4 ++++ 4 files changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/crypto/vmx/aes.c b/drivers/crypto/vmx/aes.c index 20539fb7e975..022c7ab7351a 100644 --- a/drivers/crypto/vmx/aes.c +++ b/drivers/crypto/vmx/aes.c @@ -86,6 +86,7 @@ static int p8_aes_setkey(struct crypto_tfm *tfm, const u8 *key, enable_kernel_vsx(); ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); ret += aes_p8_set_decrypt_key(key, keylen * 8, &ctx->dec_key); + disable_kernel_vsx(); pagefault_enable(); preempt_enable(); @@ -104,6 +105,7 @@ static void p8_aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) pagefault_disable(); enable_kernel_vsx(); aes_p8_encrypt(src, dst, &ctx->enc_key); + disable_kernel_vsx(); pagefault_enable(); preempt_enable(); } @@ -120,6 +122,7 @@ static void p8_aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) pagefault_disable(); enable_kernel_vsx(); aes_p8_decrypt(src, dst, &ctx->dec_key); + disable_kernel_vsx(); pagefault_enable(); preempt_enable(); } diff --git a/drivers/crypto/vmx/aes_cbc.c b/drivers/crypto/vmx/aes_cbc.c index 8847b92e9ff0..1881b3f413fa 100644 --- a/drivers/crypto/vmx/aes_cbc.c +++ b/drivers/crypto/vmx/aes_cbc.c @@ -87,6 +87,7 @@ static int p8_aes_cbc_setkey(struct crypto_tfm *tfm, const u8 *key, enable_kernel_vsx(); ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); ret += aes_p8_set_decrypt_key(key, keylen * 8, &ctx->dec_key); + disable_kernel_vsx(); pagefault_enable(); preempt_enable(); @@ -127,6 +128,7 @@ static int p8_aes_cbc_encrypt(struct blkcipher_desc *desc, ret = blkcipher_walk_done(desc, &walk, nbytes); } + disable_kernel_vsx(); pagefault_enable(); preempt_enable(); } @@ -167,6 +169,7 @@ static int p8_aes_cbc_decrypt(struct blkcipher_desc *desc, ret = blkcipher_walk_done(desc, &walk, nbytes); } + disable_kernel_vsx(); pagefault_enable(); preempt_enable(); } diff --git a/drivers/crypto/vmx/aes_ctr.c b/drivers/crypto/vmx/aes_ctr.c index 80958660c31a..2d58b18acc10 100644 --- a/drivers/crypto/vmx/aes_ctr.c +++ b/drivers/crypto/vmx/aes_ctr.c @@ -83,6 +83,7 @@ static int p8_aes_ctr_setkey(struct crypto_tfm *tfm, const u8 *key, pagefault_disable(); enable_kernel_vsx(); ret = aes_p8_set_encrypt_key(key, keylen * 8, &ctx->enc_key); + disable_kernel_vsx(); pagefault_enable(); ret += crypto_blkcipher_setkey(ctx->fallback, key, keylen); @@ -101,6 +102,7 @@ static void p8_aes_ctr_final(struct p8_aes_ctr_ctx *ctx, pagefault_disable(); enable_kernel_vsx(); aes_p8_encrypt(ctrblk, keystream, &ctx->enc_key); + disable_kernel_vsx(); pagefault_enable(); crypto_xor(keystream, src, nbytes); @@ -139,6 +141,7 @@ static int p8_aes_ctr_crypt(struct blkcipher_desc *desc, AES_BLOCK_SIZE, &ctx->enc_key, walk.iv); + disable_kernel_vsx(); pagefault_enable(); /* We need to update IV mostly for last bytes/round */ diff --git a/drivers/crypto/vmx/ghash.c b/drivers/crypto/vmx/ghash.c index 1f4586c2fd25..6c999cb01b80 100644 --- a/drivers/crypto/vmx/ghash.c +++ b/drivers/crypto/vmx/ghash.c @@ -120,6 +120,7 @@ static int p8_ghash_setkey(struct crypto_shash *tfm, const u8 *key, pagefault_disable(); enable_kernel_vsx(); gcm_init_p8(ctx->htable, (const u64 *) key); + disable_kernel_vsx(); pagefault_enable(); preempt_enable(); return crypto_shash_setkey(ctx->fallback, key, keylen); @@ -150,6 +151,7 @@ static int p8_ghash_update(struct shash_desc *desc, enable_kernel_vsx(); gcm_ghash_p8(dctx->shash, ctx->htable, dctx->buffer, GHASH_DIGEST_SIZE); + disable_kernel_vsx(); pagefault_enable(); preempt_enable(); src += GHASH_DIGEST_SIZE - dctx->bytes; @@ -162,6 +164,7 @@ static int p8_ghash_update(struct shash_desc *desc, pagefault_disable(); enable_kernel_vsx(); gcm_ghash_p8(dctx->shash, ctx->htable, src, len); + disable_kernel_vsx(); pagefault_enable(); preempt_enable(); src += len; @@ -192,6 +195,7 @@ static int p8_ghash_final(struct shash_desc *desc, u8 *out) enable_kernel_vsx(); gcm_ghash_p8(dctx->shash, ctx->htable, dctx->buffer, GHASH_DIGEST_SIZE); + disable_kernel_vsx(); pagefault_enable(); preempt_enable(); dctx->bytes = 0; -- cgit From 00b912b0c88e690b1662067497182454357b18b0 Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Tue, 15 Dec 2015 18:09:14 +1100 Subject: powerpc: Remove broken GregorianDay() GregorianDay() is supposed to calculate the day of the week (tm->tm_wday) for a given day/month/year. In that calcuation it indexed into an array called MonthOffset using tm->tm_mon-1. However tm_mon is zero-based, not one-based, so this is off-by-one. It also means that every January, GregoiranDay() will access element -1 of the MonthOffset array. It also doesn't appear to be a correct algorithm either: see in contrast kernel/time/timeconv.c's time_to_tm function. It's been broken forever, which suggests no-one in userland uses this. It looks like no-one in the kernel uses tm->tm_wday either (see e.g. drivers/rtc/rtc-ds1305.c:319). tm->tm_wday is conventionally set to -1 when not available in hardware so we can simply set it to -1 and drop the function. (There are over a dozen other drivers in drivers/rtc that do this.) Found using UBSAN. Cc: Andrey Ryabinin Cc: Andrew Morton # as an example of what UBSan finds. Cc: Alessandro Zummo Cc: Alexandre Belloni Cc: rtc-linux@googlegroups.com Signed-off-by: Daniel Axtens Acked-by: Alexandre Belloni Signed-off-by: Michael Ellerman --- drivers/rtc/rtc-opal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-opal.c b/drivers/rtc/rtc-opal.c index df39ce02a99d..9c18d6fd8107 100644 --- a/drivers/rtc/rtc-opal.c +++ b/drivers/rtc/rtc-opal.c @@ -40,7 +40,7 @@ static void opal_to_tm(u32 y_m_d, u64 h_m_s_ms, struct rtc_time *tm) tm->tm_min = bcd2bin((h_m_s_ms >> 48) & 0xff); tm->tm_sec = bcd2bin((h_m_s_ms >> 40) & 0xff); - GregorianDay(tm); + tm->tm_wday = -1; } static void tm_to_opal(struct rtc_time *tm, u32 *y_m_d, u64 *h_m_s_ms) -- cgit From e4d54f71d29997344b4c4c8d47708240f9f23a5c Mon Sep 17 00:00:00 2001 From: Stewart Smith Date: Wed, 9 Dec 2015 17:18:20 +1100 Subject: powerpc/powernv: remove FW_FEATURE_OPALv3 and just use FW_FEATURE_OPAL Long ago, only in the lab, there was OPALv1 and OPALv2. Now there is just OPALv3, with nobody ever expecting anything on pre-OPALv3 to be cared about or supported by mainline kernels. So, let's remove FW_FEATURE_OPALv3 and instead use FW_FEATURE_OPAL exclusively. Signed-off-by: Stewart Smith Signed-off-by: Michael Ellerman --- drivers/cpufreq/powernv-cpufreq.c | 2 +- drivers/cpuidle/cpuidle-powernv.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c index cb501386eb6e..547890fd9572 100644 --- a/drivers/cpufreq/powernv-cpufreq.c +++ b/drivers/cpufreq/powernv-cpufreq.c @@ -586,7 +586,7 @@ static int __init powernv_cpufreq_init(void) int rc = 0; /* Don't probe on pseries (guest) platforms */ - if (!firmware_has_feature(FW_FEATURE_OPALv3)) + if (!firmware_has_feature(FW_FEATURE_OPAL)) return -ENODEV; /* Discover pstates from device tree and init */ diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c index 845bafcfa792..e12dc30d8864 100644 --- a/drivers/cpuidle/cpuidle-powernv.c +++ b/drivers/cpuidle/cpuidle-powernv.c @@ -264,7 +264,7 @@ static int powernv_idle_probe(void) if (cpuidle_disable != IDLE_NO_OVERRIDE) return -ENODEV; - if (firmware_has_feature(FW_FEATURE_OPALv3)) { + if (firmware_has_feature(FW_FEATURE_OPAL)) { cpuidle_state_table = powernv_states; /* Device tree can indicate more idle states */ max_idle_state = powernv_add_idle_states(); -- cgit From 7aa1aa6ecec2af19d9aa85430ce3e56119e21626 Mon Sep 17 00:00:00 2001 From: Zhao Qiang Date: Mon, 30 Nov 2015 10:48:57 +0800 Subject: QE: Move QE from arch/powerpc to drivers/soc ls1 has qe and ls1 has arm cpu. move qe from arch/powerpc to drivers/soc/fsl to adapt to powerpc and arm Signed-off-by: Zhao Qiang Signed-off-by: Scott Wood --- drivers/net/ethernet/freescale/fsl_pq_mdio.c | 2 +- drivers/net/ethernet/freescale/ucc_geth.c | 8 +- drivers/net/ethernet/freescale/ucc_geth.h | 8 +- drivers/soc/Kconfig | 1 + drivers/soc/Makefile | 1 + drivers/soc/fsl/Makefile | 6 + drivers/soc/fsl/qe/Kconfig | 38 ++ drivers/soc/fsl/qe/Makefile | 10 + drivers/soc/fsl/qe/gpio.c | 317 ++++++++++++ drivers/soc/fsl/qe/qe.c | 719 +++++++++++++++++++++++++++ drivers/soc/fsl/qe/qe_common.c | 235 +++++++++ drivers/soc/fsl/qe/qe_ic.c | 503 +++++++++++++++++++ drivers/soc/fsl/qe/qe_ic.h | 103 ++++ drivers/soc/fsl/qe/qe_io.c | 192 +++++++ drivers/soc/fsl/qe/ucc.c | 212 ++++++++ drivers/soc/fsl/qe/ucc_fast.c | 363 ++++++++++++++ drivers/soc/fsl/qe/ucc_slow.c | 374 ++++++++++++++ drivers/soc/fsl/qe/usb.c | 56 +++ drivers/spi/spi-fsl-cpm.c | 2 +- drivers/tty/serial/ucc_uart.c | 2 +- drivers/usb/gadget/udc/fsl_qe_udc.c | 2 +- drivers/usb/host/fhci-hcd.c | 2 +- drivers/usb/host/fhci-hub.c | 2 +- drivers/usb/host/fhci-sched.c | 2 +- drivers/usb/host/fhci.h | 4 +- 25 files changed, 3147 insertions(+), 17 deletions(-) create mode 100644 drivers/soc/fsl/Makefile create mode 100644 drivers/soc/fsl/qe/Kconfig create mode 100644 drivers/soc/fsl/qe/Makefile create mode 100644 drivers/soc/fsl/qe/gpio.c create mode 100644 drivers/soc/fsl/qe/qe.c create mode 100644 drivers/soc/fsl/qe/qe_common.c create mode 100644 drivers/soc/fsl/qe/qe_ic.c create mode 100644 drivers/soc/fsl/qe/qe_ic.h create mode 100644 drivers/soc/fsl/qe/qe_io.c create mode 100644 drivers/soc/fsl/qe/ucc.c create mode 100644 drivers/soc/fsl/qe/ucc_fast.c create mode 100644 drivers/soc/fsl/qe/ucc_slow.c create mode 100644 drivers/soc/fsl/qe/usb.c (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c index 55c36230e176..d0a6fa6d4f3e 100644 --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -29,7 +29,7 @@ #include #if IS_ENABLED(CONFIG_UCC_GETH) -#include /* for ucc_set_qe_mux_mii_mng() */ +#include #endif #include "gianfar.h" diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 650f7888e32b..c30b72e02a1a 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -40,10 +40,10 @@ #include #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include #include "ucc_geth.h" diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h index 75f337163ce3..5da19b440a6a 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.h +++ b/drivers/net/ethernet/freescale/ucc_geth.h @@ -22,11 +22,11 @@ #include #include -#include -#include +#include +#include -#include -#include +#include +#include #define DRV_DESC "QE UCC Gigabit Ethernet Controller" #define DRV_NAME "ucc_geth" diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index 4e853ed2c82b..ad0df75fab6e 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -1,6 +1,7 @@ menu "SOC (System On Chip) specific Drivers" source "drivers/soc/brcmstb/Kconfig" +source "drivers/soc/fsl/qe/Kconfig" source "drivers/soc/mediatek/Kconfig" source "drivers/soc/qcom/Kconfig" source "drivers/soc/rockchip/Kconfig" diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index f2ba2e932ae1..9536b804424a 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/ obj-$(CONFIG_MACH_DOVE) += dove/ +obj-y += fsl/ obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/ obj-$(CONFIG_ARCH_QCOM) += qcom/ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile new file mode 100644 index 000000000000..203307fd92c1 --- /dev/null +++ b/drivers/soc/fsl/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the Linux Kernel SOC fsl specific device drivers +# + +obj-$(CONFIG_QUICC_ENGINE) += qe/ +obj-$(CONFIG_CPM) += qe/ diff --git a/drivers/soc/fsl/qe/Kconfig b/drivers/soc/fsl/qe/Kconfig new file mode 100644 index 000000000000..20978f2058a6 --- /dev/null +++ b/drivers/soc/fsl/qe/Kconfig @@ -0,0 +1,38 @@ +# +# QE Communication options +# + +config QUICC_ENGINE + bool "Freescale QUICC Engine (QE) Support" + depends on FSL_SOC && PPC32 + select GENERIC_ALLOCATOR + select CRC32 + help + The QUICC Engine (QE) is a new generation of communications + coprocessors on Freescale embedded CPUs (akin to CPM in older chips). + Selecting this option means that you wish to build a kernel + for a machine with a QE coprocessor. + +config UCC_SLOW + bool + default y if SERIAL_QE + help + This option provides qe_lib support to UCC slow + protocols: UART, BISYNC, QMC + +config UCC_FAST + bool + default y if UCC_GETH + help + This option provides qe_lib support to UCC fast + protocols: HDLC, Ethernet, ATM, transparent + +config UCC + bool + default y if UCC_FAST || UCC_SLOW + +config QE_USB + bool + default y if USB_FSL_QE + help + QE USB Controller support diff --git a/drivers/soc/fsl/qe/Makefile b/drivers/soc/fsl/qe/Makefile new file mode 100644 index 000000000000..ffac5410c5c7 --- /dev/null +++ b/drivers/soc/fsl/qe/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the linux ppc-specific parts of QE +# +obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o +obj-$(CONFIG_CPM) += qe_common.o +obj-$(CONFIG_UCC) += ucc.o +obj-$(CONFIG_UCC_SLOW) += ucc_slow.o +obj-$(CONFIG_UCC_FAST) += ucc_fast.o +obj-$(CONFIG_QE_USB) += usb.o +obj-$(CONFIG_QE_GPIO) += gpio.o diff --git a/drivers/soc/fsl/qe/gpio.c b/drivers/soc/fsl/qe/gpio.c new file mode 100644 index 000000000000..aa5c11acf212 --- /dev/null +++ b/drivers/soc/fsl/qe/gpio.c @@ -0,0 +1,317 @@ +/* + * QUICC Engine GPIOs + * + * Copyright (c) MontaVista Software, Inc. 2008. + * + * Author: Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct qe_gpio_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; + + unsigned long pin_flags[QE_PIO_PINS]; +#define QE_PIN_REQUESTED 0 + + /* shadowed data register to clear/set bits safely */ + u32 cpdata; + + /* saved_regs used to restore dedicated functions */ + struct qe_pio_regs saved_regs; +}; + +static inline struct qe_gpio_chip * +to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct qe_gpio_chip, mm_gc); +} + +static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc) +{ + struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc); + struct qe_pio_regs __iomem *regs = mm_gc->regs; + + qe_gc->cpdata = in_be32(®s->cpdata); + qe_gc->saved_regs.cpdata = qe_gc->cpdata; + qe_gc->saved_regs.cpdir1 = in_be32(®s->cpdir1); + qe_gc->saved_regs.cpdir2 = in_be32(®s->cpdir2); + qe_gc->saved_regs.cppar1 = in_be32(®s->cppar1); + qe_gc->saved_regs.cppar2 = in_be32(®s->cppar2); + qe_gc->saved_regs.cpodr = in_be32(®s->cpodr); +} + +static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct qe_pio_regs __iomem *regs = mm_gc->regs; + u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio); + + return in_be32(®s->cpdata) & pin_mask; +} + +static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc); + struct qe_pio_regs __iomem *regs = mm_gc->regs; + unsigned long flags; + u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio); + + spin_lock_irqsave(&qe_gc->lock, flags); + + if (val) + qe_gc->cpdata |= pin_mask; + else + qe_gc->cpdata &= ~pin_mask; + + out_be32(®s->cpdata, qe_gc->cpdata); + + spin_unlock_irqrestore(&qe_gc->lock, flags); +} + +static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc); + unsigned long flags; + + spin_lock_irqsave(&qe_gc->lock, flags); + + __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0); + + spin_unlock_irqrestore(&qe_gc->lock, flags); + + return 0; +} + +static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc); + unsigned long flags; + + qe_gpio_set(gc, gpio, val); + + spin_lock_irqsave(&qe_gc->lock, flags); + + __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0); + + spin_unlock_irqrestore(&qe_gc->lock, flags); + + return 0; +} + +struct qe_pin { + /* + * The qe_gpio_chip name is unfortunate, we should change that to + * something like qe_pio_controller. Someday. + */ + struct qe_gpio_chip *controller; + int num; +}; + +/** + * qe_pin_request - Request a QE pin + * @np: device node to get a pin from + * @index: index of a pin in the device tree + * Context: non-atomic + * + * This function return qe_pin so that you could use it with the rest of + * the QE Pin Multiplexing API. + */ +struct qe_pin *qe_pin_request(struct device_node *np, int index) +{ + struct qe_pin *qe_pin; + struct gpio_chip *gc; + struct of_mm_gpio_chip *mm_gc; + struct qe_gpio_chip *qe_gc; + int err; + unsigned long flags; + + qe_pin = kzalloc(sizeof(*qe_pin), GFP_KERNEL); + if (!qe_pin) { + pr_debug("%s: can't allocate memory\n", __func__); + return ERR_PTR(-ENOMEM); + } + + err = of_get_gpio(np, index); + if (err < 0) + goto err0; + gc = gpio_to_chip(err); + if (WARN_ON(!gc)) + goto err0; + + if (!of_device_is_compatible(gc->of_node, "fsl,mpc8323-qe-pario-bank")) { + pr_debug("%s: tried to get a non-qe pin\n", __func__); + err = -EINVAL; + goto err0; + } + + mm_gc = to_of_mm_gpio_chip(gc); + qe_gc = to_qe_gpio_chip(mm_gc); + + spin_lock_irqsave(&qe_gc->lock, flags); + + err -= gc->base; + if (test_and_set_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[err]) == 0) { + qe_pin->controller = qe_gc; + qe_pin->num = err; + err = 0; + } else { + err = -EBUSY; + } + + spin_unlock_irqrestore(&qe_gc->lock, flags); + + if (!err) + return qe_pin; +err0: + kfree(qe_pin); + pr_debug("%s failed with status %d\n", __func__, err); + return ERR_PTR(err); +} +EXPORT_SYMBOL(qe_pin_request); + +/** + * qe_pin_free - Free a pin + * @qe_pin: pointer to the qe_pin structure + * Context: any + * + * This function frees the qe_pin structure and makes a pin available + * for further qe_pin_request() calls. + */ +void qe_pin_free(struct qe_pin *qe_pin) +{ + struct qe_gpio_chip *qe_gc = qe_pin->controller; + unsigned long flags; + const int pin = qe_pin->num; + + spin_lock_irqsave(&qe_gc->lock, flags); + test_and_clear_bit(QE_PIN_REQUESTED, &qe_gc->pin_flags[pin]); + spin_unlock_irqrestore(&qe_gc->lock, flags); + + kfree(qe_pin); +} +EXPORT_SYMBOL(qe_pin_free); + +/** + * qe_pin_set_dedicated - Revert a pin to a dedicated peripheral function mode + * @qe_pin: pointer to the qe_pin structure + * Context: any + * + * This function resets a pin to a dedicated peripheral function that + * has been set up by the firmware. + */ +void qe_pin_set_dedicated(struct qe_pin *qe_pin) +{ + struct qe_gpio_chip *qe_gc = qe_pin->controller; + struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs; + struct qe_pio_regs *sregs = &qe_gc->saved_regs; + int pin = qe_pin->num; + u32 mask1 = 1 << (QE_PIO_PINS - (pin + 1)); + u32 mask2 = 0x3 << (QE_PIO_PINS - (pin % (QE_PIO_PINS / 2) + 1) * 2); + bool second_reg = pin > (QE_PIO_PINS / 2) - 1; + unsigned long flags; + + spin_lock_irqsave(&qe_gc->lock, flags); + + if (second_reg) { + clrsetbits_be32(®s->cpdir2, mask2, sregs->cpdir2 & mask2); + clrsetbits_be32(®s->cppar2, mask2, sregs->cppar2 & mask2); + } else { + clrsetbits_be32(®s->cpdir1, mask2, sregs->cpdir1 & mask2); + clrsetbits_be32(®s->cppar1, mask2, sregs->cppar1 & mask2); + } + + if (sregs->cpdata & mask1) + qe_gc->cpdata |= mask1; + else + qe_gc->cpdata &= ~mask1; + + out_be32(®s->cpdata, qe_gc->cpdata); + clrsetbits_be32(®s->cpodr, mask1, sregs->cpodr & mask1); + + spin_unlock_irqrestore(&qe_gc->lock, flags); +} +EXPORT_SYMBOL(qe_pin_set_dedicated); + +/** + * qe_pin_set_gpio - Set a pin to the GPIO mode + * @qe_pin: pointer to the qe_pin structure + * Context: any + * + * This function sets a pin to the GPIO mode. + */ +void qe_pin_set_gpio(struct qe_pin *qe_pin) +{ + struct qe_gpio_chip *qe_gc = qe_pin->controller; + struct qe_pio_regs __iomem *regs = qe_gc->mm_gc.regs; + unsigned long flags; + + spin_lock_irqsave(&qe_gc->lock, flags); + + /* Let's make it input by default, GPIO API is able to change that. */ + __par_io_config_pin(regs, qe_pin->num, QE_PIO_DIR_IN, 0, 0, 0); + + spin_unlock_irqrestore(&qe_gc->lock, flags); +} +EXPORT_SYMBOL(qe_pin_set_gpio); + +static int __init qe_add_gpiochips(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") { + int ret; + struct qe_gpio_chip *qe_gc; + struct of_mm_gpio_chip *mm_gc; + struct gpio_chip *gc; + + qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL); + if (!qe_gc) { + ret = -ENOMEM; + goto err; + } + + spin_lock_init(&qe_gc->lock); + + mm_gc = &qe_gc->mm_gc; + gc = &mm_gc->gc; + + mm_gc->save_regs = qe_gpio_save_regs; + gc->ngpio = QE_PIO_PINS; + gc->direction_input = qe_gpio_dir_in; + gc->direction_output = qe_gpio_dir_out; + gc->get = qe_gpio_get; + gc->set = qe_gpio_set; + + ret = of_mm_gpiochip_add(np, mm_gc); + if (ret) + goto err; + continue; +err: + pr_err("%s: registration failed with status %d\n", + np->full_name, ret); + kfree(qe_gc); + /* try others anyway */ + } + return 0; +} +arch_initcall(qe_add_gpiochips); diff --git a/drivers/soc/fsl/qe/qe.c b/drivers/soc/fsl/qe/qe.c new file mode 100644 index 000000000000..709fc63809e5 --- /dev/null +++ b/drivers/soc/fsl/qe/qe.c @@ -0,0 +1,719 @@ +/* + * Copyright (C) 2006-2010 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * Based on cpm2_common.c from Dan Malek (dmalek@jlc.net) + * + * Description: + * General Purpose functions for the global management of the + * QUICC Engine (QE). + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static void qe_snums_init(void); +static int qe_sdma_init(void); + +static DEFINE_SPINLOCK(qe_lock); +DEFINE_SPINLOCK(cmxgcr_lock); +EXPORT_SYMBOL(cmxgcr_lock); + +/* QE snum state */ +enum qe_snum_state { + QE_SNUM_STATE_USED, + QE_SNUM_STATE_FREE +}; + +/* QE snum */ +struct qe_snum { + u8 num; + enum qe_snum_state state; +}; + +/* We allocate this here because it is used almost exclusively for + * the communication processor devices. + */ +struct qe_immap __iomem *qe_immr; +EXPORT_SYMBOL(qe_immr); + +static struct qe_snum snums[QE_NUM_OF_SNUM]; /* Dynamically allocated SNUMs */ +static unsigned int qe_num_of_snum; + +static phys_addr_t qebase = -1; + +phys_addr_t get_qe_base(void) +{ + struct device_node *qe; + int size; + const u32 *prop; + + if (qebase != -1) + return qebase; + + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return qebase; + } + + prop = of_get_property(qe, "reg", &size); + if (prop && size >= sizeof(*prop)) + qebase = of_translate_address(qe, prop); + of_node_put(qe); + + return qebase; +} + +EXPORT_SYMBOL(get_qe_base); + +void qe_reset(void) +{ + if (qe_immr == NULL) + qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE); + + qe_snums_init(); + + qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, + QE_CR_PROTOCOL_UNSPECIFIED, 0); + + /* Reclaim the MURAM memory for our use. */ + qe_muram_init(); + + if (qe_sdma_init()) + panic("sdma init failed!"); +} + +int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) +{ + unsigned long flags; + u8 mcn_shift = 0, dev_shift = 0; + u32 ret; + + spin_lock_irqsave(&qe_lock, flags); + if (cmd == QE_RESET) { + out_be32(&qe_immr->cp.cecr, (u32) (cmd | QE_CR_FLG)); + } else { + if (cmd == QE_ASSIGN_PAGE) { + /* Here device is the SNUM, not sub-block */ + dev_shift = QE_CR_SNUM_SHIFT; + } else if (cmd == QE_ASSIGN_RISC) { + /* Here device is the SNUM, and mcnProtocol is + * e_QeCmdRiscAssignment value */ + dev_shift = QE_CR_SNUM_SHIFT; + mcn_shift = QE_CR_MCN_RISC_ASSIGN_SHIFT; + } else { + if (device == QE_CR_SUBBLOCK_USB) + mcn_shift = QE_CR_MCN_USB_SHIFT; + else + mcn_shift = QE_CR_MCN_NORMAL_SHIFT; + } + + out_be32(&qe_immr->cp.cecdr, cmd_input); + out_be32(&qe_immr->cp.cecr, + (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32) + mcn_protocol << mcn_shift)); + } + + /* wait for the QE_CR_FLG to clear */ + ret = spin_event_timeout((in_be32(&qe_immr->cp.cecr) & QE_CR_FLG) == 0, + 100, 0); + /* On timeout (e.g. failure), the expression will be false (ret == 0), + otherwise it will be true (ret == 1). */ + spin_unlock_irqrestore(&qe_lock, flags); + + return ret == 1; +} +EXPORT_SYMBOL(qe_issue_cmd); + +/* Set a baud rate generator. This needs lots of work. There are + * 16 BRGs, which can be connected to the QE channels or output + * as clocks. The BRGs are in two different block of internal + * memory mapped space. + * The BRG clock is the QE clock divided by 2. + * It was set up long ago during the initial boot phase and is + * is given to us. + * Baud rate clocks are zero-based in the driver code (as that maps + * to port numbers). Documentation uses 1-based numbering. + */ +static unsigned int brg_clk = 0; + +unsigned int qe_get_brg_clk(void) +{ + struct device_node *qe; + int size; + const u32 *prop; + + if (brg_clk) + return brg_clk; + + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return brg_clk; + } + + prop = of_get_property(qe, "brg-frequency", &size); + if (prop && size == sizeof(*prop)) + brg_clk = *prop; + + of_node_put(qe); + + return brg_clk; +} +EXPORT_SYMBOL(qe_get_brg_clk); + +/* Program the BRG to the given sampling rate and multiplier + * + * @brg: the BRG, QE_BRG1 - QE_BRG16 + * @rate: the desired sampling rate + * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or + * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01, + * then 'multiplier' should be 8. + */ +int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier) +{ + u32 divisor, tempval; + u32 div16 = 0; + + if ((brg < QE_BRG1) || (brg > QE_BRG16)) + return -EINVAL; + + divisor = qe_get_brg_clk() / (rate * multiplier); + + if (divisor > QE_BRGC_DIVISOR_MAX + 1) { + div16 = QE_BRGC_DIV16; + divisor /= 16; + } + + /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says + that the BRG divisor must be even if you're not using divide-by-16 + mode. */ + if (!div16 && (divisor & 1) && (divisor > 3)) + divisor++; + + tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | + QE_BRGC_ENABLE | div16; + + out_be32(&qe_immr->brg.brgc[brg - QE_BRG1], tempval); + + return 0; +} +EXPORT_SYMBOL(qe_setbrg); + +/* Convert a string to a QE clock source enum + * + * This function takes a string, typically from a property in the device + * tree, and returns the corresponding "enum qe_clock" value. +*/ +enum qe_clock qe_clock_source(const char *source) +{ + unsigned int i; + + if (strcasecmp(source, "none") == 0) + return QE_CLK_NONE; + + if (strncasecmp(source, "brg", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 16)) + return (QE_BRG1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + if (strncasecmp(source, "clk", 3) == 0) { + i = simple_strtoul(source + 3, NULL, 10); + if ((i >= 1) && (i <= 24)) + return (QE_CLK1 - 1) + i; + else + return QE_CLK_DUMMY; + } + + return QE_CLK_DUMMY; +} +EXPORT_SYMBOL(qe_clock_source); + +/* Initialize SNUMs (thread serial numbers) according to + * QE Module Control chapter, SNUM table + */ +static void qe_snums_init(void) +{ + int i; + static const u8 snum_init_76[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, 0x44, 0x45, 0x4C, 0x4D, + 0x54, 0x55, 0x5C, 0x5D, 0x64, 0x65, 0x6C, 0x6D, + 0x74, 0x75, 0x7C, 0x7D, 0x84, 0x85, 0x8C, 0x8D, + 0x94, 0x95, 0x9C, 0x9D, 0xA4, 0xA5, 0xAC, 0xAD, + 0xB4, 0xB5, 0xBC, 0xBD, 0xC4, 0xC5, 0xCC, 0xCD, + 0xD4, 0xD5, 0xDC, 0xDD, 0xE4, 0xE5, 0xEC, 0xED, + 0xF4, 0xF5, 0xFC, 0xFD, + }; + static const u8 snum_init_46[] = { + 0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D, + 0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89, + 0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9, + 0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19, + 0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59, + 0x68, 0x69, 0x78, 0x79, 0x80, 0x81, + }; + static const u8 *snum_init; + + qe_num_of_snum = qe_get_num_of_snums(); + + if (qe_num_of_snum == 76) + snum_init = snum_init_76; + else + snum_init = snum_init_46; + + for (i = 0; i < qe_num_of_snum; i++) { + snums[i].num = snum_init[i]; + snums[i].state = QE_SNUM_STATE_FREE; + } +} + +int qe_get_snum(void) +{ + unsigned long flags; + int snum = -EBUSY; + int i; + + spin_lock_irqsave(&qe_lock, flags); + for (i = 0; i < qe_num_of_snum; i++) { + if (snums[i].state == QE_SNUM_STATE_FREE) { + snums[i].state = QE_SNUM_STATE_USED; + snum = snums[i].num; + break; + } + } + spin_unlock_irqrestore(&qe_lock, flags); + + return snum; +} +EXPORT_SYMBOL(qe_get_snum); + +void qe_put_snum(u8 snum) +{ + int i; + + for (i = 0; i < qe_num_of_snum; i++) { + if (snums[i].num == snum) { + snums[i].state = QE_SNUM_STATE_FREE; + break; + } + } +} +EXPORT_SYMBOL(qe_put_snum); + +static int qe_sdma_init(void) +{ + struct sdma __iomem *sdma = &qe_immr->sdma; + static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM; + + if (!sdma) + return -ENODEV; + + /* allocate 2 internal temporary buffers (512 bytes size each) for + * the SDMA */ + if (IS_ERR_VALUE(sdma_buf_offset)) { + sdma_buf_offset = qe_muram_alloc(512 * 2, 4096); + if (IS_ERR_VALUE(sdma_buf_offset)) + return -ENOMEM; + } + + out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK); + out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | + (0x1 << QE_SDMR_CEN_SHIFT))); + + return 0; +} + +/* The maximum number of RISCs we support */ +#define MAX_QE_RISC 4 + +/* Firmware information stored here for qe_get_firmware_info() */ +static struct qe_firmware_info qe_firmware_info; + +/* + * Set to 1 if QE firmware has been uploaded, and therefore + * qe_firmware_info contains valid data. + */ +static int qe_firmware_uploaded; + +/* + * Upload a QE microcode + * + * This function is a worker function for qe_upload_firmware(). It does + * the actual uploading of the microcode. + */ +static void qe_upload_microcode(const void *base, + const struct qe_microcode *ucode) +{ + const __be32 *code = base + be32_to_cpu(ucode->code_offset); + unsigned int i; + + if (ucode->major || ucode->minor || ucode->revision) + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s' version %u.%u.%u\n", + ucode->id, ucode->major, ucode->minor, ucode->revision); + else + printk(KERN_INFO "qe-firmware: " + "uploading microcode '%s'\n", ucode->id); + + /* Use auto-increment */ + out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) | + QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR); + + for (i = 0; i < be32_to_cpu(ucode->count); i++) + out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i])); + + /* Set I-RAM Ready Register */ + out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY)); +} + +/* + * Upload a microcode to the I-RAM at a specific address. + * + * See Documentation/powerpc/qe_firmware.txt for information on QE microcode + * uploading. + * + * Currently, only version 1 is supported, so the 'version' field must be + * set to 1. + * + * The SOC model and revision are not validated, they are only displayed for + * informational purposes. + * + * 'calc_size' is the calculated size, in bytes, of the firmware structure and + * all of the microcode structures, minus the CRC. + * + * 'length' is the size that the structure says it is, including the CRC. + */ +int qe_upload_firmware(const struct qe_firmware *firmware) +{ + unsigned int i; + unsigned int j; + u32 crc; + size_t calc_size = sizeof(struct qe_firmware); + size_t length; + const struct qe_header *hdr; + + if (!firmware) { + printk(KERN_ERR "qe-firmware: invalid pointer\n"); + return -EINVAL; + } + + hdr = &firmware->header; + length = be32_to_cpu(hdr->length); + + /* Check the magic */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printk(KERN_ERR "qe-firmware: not a microcode\n"); + return -EPERM; + } + + /* Check the version */ + if (hdr->version != 1) { + printk(KERN_ERR "qe-firmware: unsupported version\n"); + return -EPERM; + } + + /* Validate some of the fields */ + if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { + printk(KERN_ERR "qe-firmware: invalid data\n"); + return -EINVAL; + } + + /* Validate the length and check if there's a CRC */ + calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); + + for (i = 0; i < firmware->count; i++) + /* + * For situations where the second RISC uses the same microcode + * as the first, the 'code_offset' and 'count' fields will be + * zero, so it's okay to add those. + */ + calc_size += sizeof(__be32) * + be32_to_cpu(firmware->microcode[i].count); + + /* Validate the length */ + if (length != calc_size + sizeof(__be32)) { + printk(KERN_ERR "qe-firmware: invalid length\n"); + return -EPERM; + } + + /* Validate the CRC */ + crc = be32_to_cpu(*(__be32 *)((void *)firmware + calc_size)); + if (crc != crc32(0, firmware, calc_size)) { + printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n"); + return -EIO; + } + + /* + * If the microcode calls for it, split the I-RAM. + */ + if (!firmware->split) + setbits16(&qe_immr->cp.cercr, QE_CP_CERCR_CIR); + + if (firmware->soc.model) + printk(KERN_INFO + "qe-firmware: firmware '%s' for %u V%u.%u\n", + firmware->id, be16_to_cpu(firmware->soc.model), + firmware->soc.major, firmware->soc.minor); + else + printk(KERN_INFO "qe-firmware: firmware '%s'\n", + firmware->id); + + /* + * The QE only supports one microcode per RISC, so clear out all the + * saved microcode information and put in the new. + */ + memset(&qe_firmware_info, 0, sizeof(qe_firmware_info)); + strlcpy(qe_firmware_info.id, firmware->id, sizeof(qe_firmware_info.id)); + qe_firmware_info.extended_modes = firmware->extended_modes; + memcpy(qe_firmware_info.vtraps, firmware->vtraps, + sizeof(firmware->vtraps)); + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (ucode->code_offset) + qe_upload_microcode(firmware, ucode); + + /* Program the traps for this processor */ + for (j = 0; j < 16; j++) { + u32 trap = be32_to_cpu(ucode->traps[j]); + + if (trap) + out_be32(&qe_immr->rsp[i].tibcr[j], trap); + } + + /* Enable traps */ + out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr)); + } + + qe_firmware_uploaded = 1; + + return 0; +} +EXPORT_SYMBOL(qe_upload_firmware); + +/* + * Get info on the currently-loaded firmware + * + * This function also checks the device tree to see if the boot loader has + * uploaded a firmware already. + */ +struct qe_firmware_info *qe_get_firmware_info(void) +{ + static int initialized; + struct property *prop; + struct device_node *qe; + struct device_node *fw = NULL; + const char *sprop; + unsigned int i; + + /* + * If we haven't checked yet, and a driver hasn't uploaded a firmware + * yet, then check the device tree for information. + */ + if (qe_firmware_uploaded) + return &qe_firmware_info; + + if (initialized) + return NULL; + + initialized = 1; + + /* + * Newer device trees have an "fsl,qe" compatible property for the QE + * node, but we still need to support older device trees. + */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return NULL; + } + + /* Find the 'firmware' child node */ + for_each_child_of_node(qe, fw) { + if (strcmp(fw->name, "firmware") == 0) + break; + } + + of_node_put(qe); + + /* Did we find the 'firmware' node? */ + if (!fw) + return NULL; + + qe_firmware_uploaded = 1; + + /* Copy the data into qe_firmware_info*/ + sprop = of_get_property(fw, "id", NULL); + if (sprop) + strlcpy(qe_firmware_info.id, sprop, + sizeof(qe_firmware_info.id)); + + prop = of_find_property(fw, "extended-modes", NULL); + if (prop && (prop->length == sizeof(u64))) { + const u64 *iprop = prop->value; + + qe_firmware_info.extended_modes = *iprop; + } + + prop = of_find_property(fw, "virtual-traps", NULL); + if (prop && (prop->length == 32)) { + const u32 *iprop = prop->value; + + for (i = 0; i < ARRAY_SIZE(qe_firmware_info.vtraps); i++) + qe_firmware_info.vtraps[i] = iprop[i]; + } + + of_node_put(fw); + + return &qe_firmware_info; +} +EXPORT_SYMBOL(qe_get_firmware_info); + +unsigned int qe_get_num_of_risc(void) +{ + struct device_node *qe; + int size; + unsigned int num_of_risc = 0; + const u32 *prop; + + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + /* Older devices trees did not have an "fsl,qe" + * compatible property, so we need to look for + * the QE node by name. + */ + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return num_of_risc; + } + + prop = of_get_property(qe, "fsl,qe-num-riscs", &size); + if (prop && size == sizeof(*prop)) + num_of_risc = *prop; + + of_node_put(qe); + + return num_of_risc; +} +EXPORT_SYMBOL(qe_get_num_of_risc); + +unsigned int qe_get_num_of_snums(void) +{ + struct device_node *qe; + int size; + unsigned int num_of_snums; + const u32 *prop; + + num_of_snums = 28; /* The default number of snum for threads is 28 */ + qe = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!qe) { + /* Older devices trees did not have an "fsl,qe" + * compatible property, so we need to look for + * the QE node by name. + */ + qe = of_find_node_by_type(NULL, "qe"); + if (!qe) + return num_of_snums; + } + + prop = of_get_property(qe, "fsl,qe-num-snums", &size); + if (prop && size == sizeof(*prop)) { + num_of_snums = *prop; + if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) { + /* No QE ever has fewer than 28 SNUMs */ + pr_err("QE: number of snum is invalid\n"); + of_node_put(qe); + return -EINVAL; + } + } + + of_node_put(qe); + + return num_of_snums; +} +EXPORT_SYMBOL(qe_get_num_of_snums); + +static int __init qe_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) + return -ENODEV; + qe_reset(); + of_node_put(np); + return 0; +} +subsys_initcall(qe_init); + +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) +static int qe_resume(struct platform_device *ofdev) +{ + if (!qe_alive_during_sleep()) + qe_reset(); + return 0; +} + +static int qe_probe(struct platform_device *ofdev) +{ + return 0; +} + +static const struct of_device_id qe_ids[] = { + { .compatible = "fsl,qe", }, + { }, +}; + +static struct platform_driver qe_driver = { + .driver = { + .name = "fsl-qe", + .of_match_table = qe_ids, + }, + .probe = qe_probe, + .resume = qe_resume, +}; + +static int __init qe_drv_init(void) +{ + return platform_driver_register(&qe_driver); +} +device_initcall(qe_drv_init); +#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */ diff --git a/drivers/soc/fsl/qe/qe_common.c b/drivers/soc/fsl/qe/qe_common.c new file mode 100644 index 000000000000..419fa5b7be4d --- /dev/null +++ b/drivers/soc/fsl/qe/qe_common.c @@ -0,0 +1,235 @@ +/* + * Common CPM code + * + * Author: Scott Wood + * + * Copyright 2007-2008,2010 Freescale Semiconductor, Inc. + * + * Some parts derived from commproc.c/cpm2_common.c, which is: + * Copyright (c) 1997 Dan error_act (dmalek@jlc.net) + * Copyright (c) 1999-2001 Dan Malek + * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com) + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct gen_pool *muram_pool; +static spinlock_t cpm_muram_lock; +static u8 __iomem *muram_vbase; +static phys_addr_t muram_pbase; + +struct muram_block { + struct list_head head; + unsigned long start; + int size; +}; + +static LIST_HEAD(muram_block_list); + +/* max address size we deal with */ +#define OF_MAX_ADDR_CELLS 4 +#define GENPOOL_OFFSET (4096 * 8) + +int cpm_muram_init(void) +{ + struct device_node *np; + struct resource r; + u32 zero[OF_MAX_ADDR_CELLS] = {}; + resource_size_t max = 0; + int i = 0; + int ret = 0; + + if (muram_pbase) + return 0; + + spin_lock_init(&cpm_muram_lock); + np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data"); + if (!np) { + /* try legacy bindings */ + np = of_find_node_by_name(NULL, "data-only"); + if (!np) { + pr_err("Cannot find CPM muram data node"); + ret = -ENODEV; + goto out_muram; + } + } + + muram_pool = gen_pool_create(0, -1); + muram_pbase = of_translate_address(np, zero); + if (muram_pbase == (phys_addr_t)OF_BAD_ADDR) { + pr_err("Cannot translate zero through CPM muram node"); + ret = -ENODEV; + goto out_pool; + } + + while (of_address_to_resource(np, i++, &r) == 0) { + if (r.end > max) + max = r.end; + ret = gen_pool_add(muram_pool, r.start - muram_pbase + + GENPOOL_OFFSET, resource_size(&r), -1); + if (ret) { + pr_err("QE: couldn't add muram to pool!\n"); + goto out_pool; + } + } + + muram_vbase = ioremap(muram_pbase, max - muram_pbase + 1); + if (!muram_vbase) { + pr_err("Cannot map QE muram"); + ret = -ENOMEM; + goto out_pool; + } + goto out_muram; +out_pool: + gen_pool_destroy(muram_pool); +out_muram: + of_node_put(np); + return ret; +} + +/* + * cpm_muram_alloc - allocate the requested size worth of multi-user ram + * @size: number of bytes to allocate + * @align: requested alignment, in bytes + * + * This function returns an offset into the muram area. + * Use cpm_dpram_addr() to get the virtual address of the area. + * Use cpm_muram_free() to free the allocation. + */ +unsigned long cpm_muram_alloc(unsigned long size, unsigned long align) +{ + unsigned long start; + unsigned long flags; + struct genpool_data_align muram_pool_data; + + spin_lock_irqsave(&cpm_muram_lock, flags); + muram_pool_data.align = align; + start = cpm_muram_alloc_common(size, gen_pool_first_fit_align, + &muram_pool_data); + spin_unlock_irqrestore(&cpm_muram_lock, flags); + return start; +} +EXPORT_SYMBOL(cpm_muram_alloc); + +/** + * cpm_muram_free - free a chunk of multi-user ram + * @offset: The beginning of the chunk as returned by cpm_muram_alloc(). + */ +int cpm_muram_free(unsigned long offset) +{ + unsigned long flags; + int size; + struct muram_block *tmp; + + size = 0; + spin_lock_irqsave(&cpm_muram_lock, flags); + list_for_each_entry(tmp, &muram_block_list, head) { + if (tmp->start == offset) { + size = tmp->size; + list_del(&tmp->head); + kfree(tmp); + break; + } + } + gen_pool_free(muram_pool, offset + GENPOOL_OFFSET, size); + spin_unlock_irqrestore(&cpm_muram_lock, flags); + return size; +} +EXPORT_SYMBOL(cpm_muram_free); + +/* + * cpm_muram_alloc_fixed - reserve a specific region of multi-user ram + * @offset: offset of allocation start address + * @size: number of bytes to allocate + * This function returns an offset into the muram area + * Use cpm_dpram_addr() to get the virtual address of the area. + * Use cpm_muram_free() to free the allocation. + */ +unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size) +{ + unsigned long start; + unsigned long flags; + struct genpool_data_fixed muram_pool_data_fixed; + + spin_lock_irqsave(&cpm_muram_lock, flags); + muram_pool_data_fixed.offset = offset + GENPOOL_OFFSET; + start = cpm_muram_alloc_common(size, gen_pool_fixed_alloc, + &muram_pool_data_fixed); + spin_unlock_irqrestore(&cpm_muram_lock, flags); + return start; +} +EXPORT_SYMBOL(cpm_muram_alloc_fixed); + +/* + * cpm_muram_alloc_common - cpm_muram_alloc common code + * @size: number of bytes to allocate + * @algo: algorithm for alloc. + * @data: data for genalloc's algorithm. + * + * This function returns an offset into the muram area. + */ +unsigned long cpm_muram_alloc_common(unsigned long size, genpool_algo_t algo, + void *data) +{ + struct muram_block *entry; + unsigned long start; + + start = gen_pool_alloc_algo(muram_pool, size, algo, data); + if (!start) + goto out2; + start = start - GENPOOL_OFFSET; + memset_io(cpm_muram_addr(start), 0, size); + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) + goto out1; + entry->start = start; + entry->size = size; + list_add(&entry->head, &muram_block_list); + + return start; +out1: + gen_pool_free(muram_pool, start, size); +out2: + return (unsigned long)-ENOMEM; +} + +/** + * cpm_muram_addr - turn a muram offset into a virtual address + * @offset: muram offset to convert + */ +void __iomem *cpm_muram_addr(unsigned long offset) +{ + return muram_vbase + offset; +} +EXPORT_SYMBOL(cpm_muram_addr); + +unsigned long cpm_muram_offset(void __iomem *addr) +{ + return addr - (void __iomem *)muram_vbase; +} +EXPORT_SYMBOL(cpm_muram_offset); + +/** + * cpm_muram_dma - turn a muram virtual address into a DMA address + * @offset: virtual address from cpm_muram_addr() to convert + */ +dma_addr_t cpm_muram_dma(void __iomem *addr) +{ + return muram_pbase + ((u8 __iomem *)addr - muram_vbase); +} +EXPORT_SYMBOL(cpm_muram_dma); diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/soc/fsl/qe/qe_ic.c new file mode 100644 index 000000000000..b77d01ff8330 --- /dev/null +++ b/drivers/soc/fsl/qe/qe_ic.c @@ -0,0 +1,503 @@ +/* + * arch/powerpc/sysdev/qe_lib/qe_ic.c + * + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: Li Yang + * Based on code from Shlomi Gridish + * + * QUICC ENGINE Interrupt Controller + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "qe_ic.h" + +static DEFINE_RAW_SPINLOCK(qe_ic_lock); + +static struct qe_ic_info qe_ic_info[] = { + [1] = { + .mask = 0x00008000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPWCC, + }, + [2] = { + .mask = 0x00004000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPWCC, + }, + [3] = { + .mask = 0x00002000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPWCC, + }, + [10] = { + .mask = 0x00000040, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPZCC, + }, + [11] = { + .mask = 0x00000020, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPZCC, + }, + [12] = { + .mask = 0x00000010, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPZCC, + }, + [13] = { + .mask = 0x00000008, + .mask_reg = QEIC_CIMR, + .pri_code = 4, + .pri_reg = QEIC_CIPZCC, + }, + [14] = { + .mask = 0x00000004, + .mask_reg = QEIC_CIMR, + .pri_code = 5, + .pri_reg = QEIC_CIPZCC, + }, + [15] = { + .mask = 0x00000002, + .mask_reg = QEIC_CIMR, + .pri_code = 6, + .pri_reg = QEIC_CIPZCC, + }, + [20] = { + .mask = 0x10000000, + .mask_reg = QEIC_CRIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPRTA, + }, + [25] = { + .mask = 0x00800000, + .mask_reg = QEIC_CRIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPRTB, + }, + [26] = { + .mask = 0x00400000, + .mask_reg = QEIC_CRIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPRTB, + }, + [27] = { + .mask = 0x00200000, + .mask_reg = QEIC_CRIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPRTB, + }, + [28] = { + .mask = 0x00100000, + .mask_reg = QEIC_CRIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPRTB, + }, + [32] = { + .mask = 0x80000000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPXCC, + }, + [33] = { + .mask = 0x40000000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPXCC, + }, + [34] = { + .mask = 0x20000000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPXCC, + }, + [35] = { + .mask = 0x10000000, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPXCC, + }, + [36] = { + .mask = 0x08000000, + .mask_reg = QEIC_CIMR, + .pri_code = 4, + .pri_reg = QEIC_CIPXCC, + }, + [40] = { + .mask = 0x00800000, + .mask_reg = QEIC_CIMR, + .pri_code = 0, + .pri_reg = QEIC_CIPYCC, + }, + [41] = { + .mask = 0x00400000, + .mask_reg = QEIC_CIMR, + .pri_code = 1, + .pri_reg = QEIC_CIPYCC, + }, + [42] = { + .mask = 0x00200000, + .mask_reg = QEIC_CIMR, + .pri_code = 2, + .pri_reg = QEIC_CIPYCC, + }, + [43] = { + .mask = 0x00100000, + .mask_reg = QEIC_CIMR, + .pri_code = 3, + .pri_reg = QEIC_CIPYCC, + }, +}; + +static inline u32 qe_ic_read(volatile __be32 __iomem * base, unsigned int reg) +{ + return in_be32(base + (reg >> 2)); +} + +static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg, + u32 value) +{ + out_be32(base + (reg >> 2), value); +} + +static inline struct qe_ic *qe_ic_from_irq(unsigned int virq) +{ + return irq_get_chip_data(virq); +} + +static inline struct qe_ic *qe_ic_from_irq_data(struct irq_data *d) +{ + return irq_data_get_irq_chip_data(d); +} + +static void qe_ic_unmask_irq(struct irq_data *d) +{ + struct qe_ic *qe_ic = qe_ic_from_irq_data(d); + unsigned int src = irqd_to_hwirq(d); + unsigned long flags; + u32 temp; + + raw_spin_lock_irqsave(&qe_ic_lock, flags); + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); + qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, + temp | qe_ic_info[src].mask); + + raw_spin_unlock_irqrestore(&qe_ic_lock, flags); +} + +static void qe_ic_mask_irq(struct irq_data *d) +{ + struct qe_ic *qe_ic = qe_ic_from_irq_data(d); + unsigned int src = irqd_to_hwirq(d); + unsigned long flags; + u32 temp; + + raw_spin_lock_irqsave(&qe_ic_lock, flags); + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); + qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, + temp & ~qe_ic_info[src].mask); + + /* Flush the above write before enabling interrupts; otherwise, + * spurious interrupts will sometimes happen. To be 100% sure + * that the write has reached the device before interrupts are + * enabled, the mask register would have to be read back; however, + * this is not required for correctness, only to avoid wasting + * time on a large number of spurious interrupts. In testing, + * a sync reduced the observed spurious interrupts to zero. + */ + mb(); + + raw_spin_unlock_irqrestore(&qe_ic_lock, flags); +} + +static struct irq_chip qe_ic_irq_chip = { + .name = "QEIC", + .irq_unmask = qe_ic_unmask_irq, + .irq_mask = qe_ic_mask_irq, + .irq_mask_ack = qe_ic_mask_irq, +}; + +static int qe_ic_host_match(struct irq_domain *h, struct device_node *node, + enum irq_domain_bus_token bus_token) +{ + /* Exact match, unless qe_ic node is NULL */ + struct device_node *of_node = irq_domain_get_of_node(h); + return of_node == NULL || of_node == node; +} + +static int qe_ic_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct qe_ic *qe_ic = h->host_data; + struct irq_chip *chip; + + if (qe_ic_info[hw].mask == 0) { + printk(KERN_ERR "Can't map reserved IRQ\n"); + return -EINVAL; + } + /* Default chip */ + chip = &qe_ic->hc_irq; + + irq_set_chip_data(virq, qe_ic); + irq_set_status_flags(virq, IRQ_LEVEL); + + irq_set_chip_and_handler(virq, chip, handle_level_irq); + + return 0; +} + +static const struct irq_domain_ops qe_ic_host_ops = { + .match = qe_ic_host_match, + .map = qe_ic_host_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic) +{ + int irq; + + BUG_ON(qe_ic == NULL); + + /* get the interrupt source vector. */ + irq = qe_ic_read(qe_ic->regs, QEIC_CIVEC) >> 26; + + if (irq == 0) + return NO_IRQ; + + return irq_linear_revmap(qe_ic->irqhost, irq); +} + +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic) +{ + int irq; + + BUG_ON(qe_ic == NULL); + + /* get the interrupt source vector. */ + irq = qe_ic_read(qe_ic->regs, QEIC_CHIVEC) >> 26; + + if (irq == 0) + return NO_IRQ; + + return irq_linear_revmap(qe_ic->irqhost, irq); +} + +void __init qe_ic_init(struct device_node *node, unsigned int flags, + void (*low_handler)(struct irq_desc *desc), + void (*high_handler)(struct irq_desc *desc)) +{ + struct qe_ic *qe_ic; + struct resource res; + u32 temp = 0, ret, high_active = 0; + + ret = of_address_to_resource(node, 0, &res); + if (ret) + return; + + qe_ic = kzalloc(sizeof(*qe_ic), GFP_KERNEL); + if (qe_ic == NULL) + return; + + qe_ic->irqhost = irq_domain_add_linear(node, NR_QE_IC_INTS, + &qe_ic_host_ops, qe_ic); + if (qe_ic->irqhost == NULL) { + kfree(qe_ic); + return; + } + + qe_ic->regs = ioremap(res.start, resource_size(&res)); + + qe_ic->hc_irq = qe_ic_irq_chip; + + qe_ic->virq_high = irq_of_parse_and_map(node, 0); + qe_ic->virq_low = irq_of_parse_and_map(node, 1); + + if (qe_ic->virq_low == NO_IRQ) { + printk(KERN_ERR "Failed to map QE_IC low IRQ\n"); + kfree(qe_ic); + return; + } + + /* default priority scheme is grouped. If spread mode is */ + /* required, configure cicr accordingly. */ + if (flags & QE_IC_SPREADMODE_GRP_W) + temp |= CICR_GWCC; + if (flags & QE_IC_SPREADMODE_GRP_X) + temp |= CICR_GXCC; + if (flags & QE_IC_SPREADMODE_GRP_Y) + temp |= CICR_GYCC; + if (flags & QE_IC_SPREADMODE_GRP_Z) + temp |= CICR_GZCC; + if (flags & QE_IC_SPREADMODE_GRP_RISCA) + temp |= CICR_GRTA; + if (flags & QE_IC_SPREADMODE_GRP_RISCB) + temp |= CICR_GRTB; + + /* choose destination signal for highest priority interrupt */ + if (flags & QE_IC_HIGH_SIGNAL) { + temp |= (SIGNAL_HIGH << CICR_HPIT_SHIFT); + high_active = 1; + } + + qe_ic_write(qe_ic->regs, QEIC_CICR, temp); + + irq_set_handler_data(qe_ic->virq_low, qe_ic); + irq_set_chained_handler(qe_ic->virq_low, low_handler); + + if (qe_ic->virq_high != NO_IRQ && + qe_ic->virq_high != qe_ic->virq_low) { + irq_set_handler_data(qe_ic->virq_high, qe_ic); + irq_set_chained_handler(qe_ic->virq_high, high_handler); + } +} + +void qe_ic_set_highest_priority(unsigned int virq, int high) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp = 0; + + temp = qe_ic_read(qe_ic->regs, QEIC_CICR); + + temp &= ~CICR_HP_MASK; + temp |= src << CICR_HP_SHIFT; + + temp &= ~CICR_HPIT_MASK; + temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << CICR_HPIT_SHIFT; + + qe_ic_write(qe_ic->regs, QEIC_CICR, temp); +} + +/* Set Priority level within its group, from 1 to 8 */ +int qe_ic_set_priority(unsigned int virq, unsigned int priority) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp; + + if (priority > 8 || priority == 0) + return -EINVAL; + if (src > 127) + return -EINVAL; + if (qe_ic_info[src].pri_reg == 0) + return -EINVAL; + + temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].pri_reg); + + if (priority < 4) { + temp &= ~(0x7 << (32 - priority * 3)); + temp |= qe_ic_info[src].pri_code << (32 - priority * 3); + } else { + temp &= ~(0x7 << (24 - priority * 3)); + temp |= qe_ic_info[src].pri_code << (24 - priority * 3); + } + + qe_ic_write(qe_ic->regs, qe_ic_info[src].pri_reg, temp); + + return 0; +} + +/* Set a QE priority to use high irq, only priority 1~2 can use high irq */ +int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high) +{ + struct qe_ic *qe_ic = qe_ic_from_irq(virq); + unsigned int src = virq_to_hw(virq); + u32 temp, control_reg = QEIC_CICNR, shift = 0; + + if (priority > 2 || priority == 0) + return -EINVAL; + + switch (qe_ic_info[src].pri_reg) { + case QEIC_CIPZCC: + shift = CICNR_ZCC1T_SHIFT; + break; + case QEIC_CIPWCC: + shift = CICNR_WCC1T_SHIFT; + break; + case QEIC_CIPYCC: + shift = CICNR_YCC1T_SHIFT; + break; + case QEIC_CIPXCC: + shift = CICNR_XCC1T_SHIFT; + break; + case QEIC_CIPRTA: + shift = CRICR_RTA1T_SHIFT; + control_reg = QEIC_CRICR; + break; + case QEIC_CIPRTB: + shift = CRICR_RTB1T_SHIFT; + control_reg = QEIC_CRICR; + break; + default: + return -EINVAL; + } + + shift += (2 - priority) * 2; + temp = qe_ic_read(qe_ic->regs, control_reg); + temp &= ~(SIGNAL_MASK << shift); + temp |= (high ? SIGNAL_HIGH : SIGNAL_LOW) << shift; + qe_ic_write(qe_ic->regs, control_reg, temp); + + return 0; +} + +static struct bus_type qe_ic_subsys = { + .name = "qe_ic", + .dev_name = "qe_ic", +}; + +static struct device device_qe_ic = { + .id = 0, + .bus = &qe_ic_subsys, +}; + +static int __init init_qe_ic_sysfs(void) +{ + int rc; + + printk(KERN_DEBUG "Registering qe_ic with sysfs...\n"); + + rc = subsys_system_register(&qe_ic_subsys, NULL); + if (rc) { + printk(KERN_ERR "Failed registering qe_ic sys class\n"); + return -ENODEV; + } + rc = device_register(&device_qe_ic); + if (rc) { + printk(KERN_ERR "Failed registering qe_ic sys device\n"); + return -ENODEV; + } + return 0; +} + +subsys_initcall(init_qe_ic_sysfs); diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h new file mode 100644 index 000000000000..926a2ed42319 --- /dev/null +++ b/drivers/soc/fsl/qe/qe_ic.h @@ -0,0 +1,103 @@ +/* + * drivers/soc/fsl/qe/qe_ic.h + * + * QUICC ENGINE Interrupt Controller Header + * + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: Li Yang + * Based on code from Shlomi Gridish + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _POWERPC_SYSDEV_QE_IC_H +#define _POWERPC_SYSDEV_QE_IC_H + +#include + +#define NR_QE_IC_INTS 64 + +/* QE IC registers offset */ +#define QEIC_CICR 0x00 +#define QEIC_CIVEC 0x04 +#define QEIC_CRIPNR 0x08 +#define QEIC_CIPNR 0x0c +#define QEIC_CIPXCC 0x10 +#define QEIC_CIPYCC 0x14 +#define QEIC_CIPWCC 0x18 +#define QEIC_CIPZCC 0x1c +#define QEIC_CIMR 0x20 +#define QEIC_CRIMR 0x24 +#define QEIC_CICNR 0x28 +#define QEIC_CIPRTA 0x30 +#define QEIC_CIPRTB 0x34 +#define QEIC_CRICR 0x3c +#define QEIC_CHIVEC 0x60 + +/* Interrupt priority registers */ +#define CIPCC_SHIFT_PRI0 29 +#define CIPCC_SHIFT_PRI1 26 +#define CIPCC_SHIFT_PRI2 23 +#define CIPCC_SHIFT_PRI3 20 +#define CIPCC_SHIFT_PRI4 13 +#define CIPCC_SHIFT_PRI5 10 +#define CIPCC_SHIFT_PRI6 7 +#define CIPCC_SHIFT_PRI7 4 + +/* CICR priority modes */ +#define CICR_GWCC 0x00040000 +#define CICR_GXCC 0x00020000 +#define CICR_GYCC 0x00010000 +#define CICR_GZCC 0x00080000 +#define CICR_GRTA 0x00200000 +#define CICR_GRTB 0x00400000 +#define CICR_HPIT_SHIFT 8 +#define CICR_HPIT_MASK 0x00000300 +#define CICR_HP_SHIFT 24 +#define CICR_HP_MASK 0x3f000000 + +/* CICNR */ +#define CICNR_WCC1T_SHIFT 20 +#define CICNR_ZCC1T_SHIFT 28 +#define CICNR_YCC1T_SHIFT 12 +#define CICNR_XCC1T_SHIFT 4 + +/* CRICR */ +#define CRICR_RTA1T_SHIFT 20 +#define CRICR_RTB1T_SHIFT 28 + +/* Signal indicator */ +#define SIGNAL_MASK 3 +#define SIGNAL_HIGH 2 +#define SIGNAL_LOW 0 + +struct qe_ic { + /* Control registers offset */ + volatile u32 __iomem *regs; + + /* The remapper for this QEIC */ + struct irq_domain *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; + + /* VIRQ numbers of QE high/low irqs */ + unsigned int virq_high; + unsigned int virq_low; +}; + +/* + * QE interrupt controller internal structure + */ +struct qe_ic_info { + u32 mask; /* location of this source at the QIMR register. */ + u32 mask_reg; /* Mask register offset */ + u8 pri_code; /* for grouped interrupts sources - the interrupt + code as appears at the group priority register */ + u32 pri_reg; /* Group priority register offset */ +}; + +#endif /* _POWERPC_SYSDEV_QE_IC_H */ diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c new file mode 100644 index 000000000000..7ae59abc7863 --- /dev/null +++ b/drivers/soc/fsl/qe/qe_io.c @@ -0,0 +1,192 @@ +/* + * arch/powerpc/sysdev/qe_lib/qe_io.c + * + * QE Parallel I/O ports configuration routines + * + * Copyright 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Author: Li Yang + * Based on code from Shlomi Gridish + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#undef DEBUG + +static struct qe_pio_regs __iomem *par_io; +static int num_par_io_ports = 0; + +int par_io_init(struct device_node *np) +{ + struct resource res; + int ret; + const u32 *num_ports; + + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np, 0, &res); + if (ret) + return ret; + par_io = ioremap(res.start, resource_size(&res)); + + num_ports = of_get_property(np, "num-ports", NULL); + if (num_ports) + num_par_io_ports = *num_ports; + + return 0; +} + +void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir, + int open_drain, int assignment, int has_irq) +{ + u32 pin_mask1bit; + u32 pin_mask2bits; + u32 new_mask2bits; + u32 tmp_val; + + /* calculate pin location for single and 2 bits information */ + pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1))); + + /* Set open drain, if required */ + tmp_val = in_be32(&par_io->cpodr); + if (open_drain) + out_be32(&par_io->cpodr, pin_mask1bit | tmp_val); + else + out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val); + + /* define direction */ + tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ? + in_be32(&par_io->cpdir2) : + in_be32(&par_io->cpdir1); + + /* get all bits mask for 2 bit per port */ + pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS - + (pin % (QE_PIO_PINS / 2) + 1) * 2)); + + /* Get the final mask we need for the right definition */ + new_mask2bits = (u32) (dir << (QE_PIO_PINS - + (pin % (QE_PIO_PINS / 2) + 1) * 2)); + + /* clear and set 2 bits mask */ + if (pin > (QE_PIO_PINS / 2) - 1) { + out_be32(&par_io->cpdir2, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io->cpdir2, new_mask2bits | tmp_val); + } else { + out_be32(&par_io->cpdir1, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io->cpdir1, new_mask2bits | tmp_val); + } + /* define pin assignment */ + tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ? + in_be32(&par_io->cppar2) : + in_be32(&par_io->cppar1); + + new_mask2bits = (u32) (assignment << (QE_PIO_PINS - + (pin % (QE_PIO_PINS / 2) + 1) * 2)); + /* clear and set 2 bits mask */ + if (pin > (QE_PIO_PINS / 2) - 1) { + out_be32(&par_io->cppar2, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io->cppar2, new_mask2bits | tmp_val); + } else { + out_be32(&par_io->cppar1, + ~pin_mask2bits & tmp_val); + tmp_val &= ~pin_mask2bits; + out_be32(&par_io->cppar1, new_mask2bits | tmp_val); + } +} +EXPORT_SYMBOL(__par_io_config_pin); + +int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, + int assignment, int has_irq) +{ + if (!par_io || port >= num_par_io_ports) + return -EINVAL; + + __par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment, + has_irq); + return 0; +} +EXPORT_SYMBOL(par_io_config_pin); + +int par_io_data_set(u8 port, u8 pin, u8 val) +{ + u32 pin_mask, tmp_val; + + if (port >= num_par_io_ports) + return -EINVAL; + if (pin >= QE_PIO_PINS) + return -EINVAL; + /* calculate pin location */ + pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin)); + + tmp_val = in_be32(&par_io[port].cpdata); + + if (val == 0) /* clear */ + out_be32(&par_io[port].cpdata, ~pin_mask & tmp_val); + else /* set */ + out_be32(&par_io[port].cpdata, pin_mask | tmp_val); + + return 0; +} +EXPORT_SYMBOL(par_io_data_set); + +int par_io_of_config(struct device_node *np) +{ + struct device_node *pio; + const phandle *ph; + int pio_map_len; + const unsigned int *pio_map; + + if (par_io == NULL) { + printk(KERN_ERR "par_io not initialized\n"); + return -1; + } + + ph = of_get_property(np, "pio-handle", NULL); + if (ph == NULL) { + printk(KERN_ERR "pio-handle not available\n"); + return -1; + } + + pio = of_find_node_by_phandle(*ph); + + pio_map = of_get_property(pio, "pio-map", &pio_map_len); + if (pio_map == NULL) { + printk(KERN_ERR "pio-map is not set!\n"); + return -1; + } + pio_map_len /= sizeof(unsigned int); + if ((pio_map_len % 6) != 0) { + printk(KERN_ERR "pio-map format wrong!\n"); + return -1; + } + + while (pio_map_len > 0) { + par_io_config_pin((u8) pio_map[0], (u8) pio_map[1], + (int) pio_map[2], (int) pio_map[3], + (int) pio_map[4], (int) pio_map[5]); + pio_map += 6; + pio_map_len -= 6; + } + of_node_put(pio); + return 0; +} +EXPORT_SYMBOL(par_io_of_config); diff --git a/drivers/soc/fsl/qe/ucc.c b/drivers/soc/fsl/qe/ucc.c new file mode 100644 index 000000000000..b59d3358f9bd --- /dev/null +++ b/drivers/soc/fsl/qe/ucc.c @@ -0,0 +1,212 @@ +/* + * arch/powerpc/sysdev/qe_lib/ucc.c + * + * QE UCC API Set - UCC specific routines implementations. + * + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +int ucc_set_qe_mux_mii_mng(unsigned int ucc_num) +{ + unsigned long flags; + + if (ucc_num > UCC_MAX_NUM - 1) + return -EINVAL; + + spin_lock_irqsave(&cmxgcr_lock, flags); + clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG, + ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT); + spin_unlock_irqrestore(&cmxgcr_lock, flags); + + return 0; +} +EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng); + +/* Configure the UCC to either Slow or Fast. + * + * A given UCC can be figured to support either "slow" devices (e.g. UART) + * or "fast" devices (e.g. Ethernet). + * + * 'ucc_num' is the UCC number, from 0 - 7. + * + * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit + * must always be set to 1. + */ +int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed) +{ + u8 __iomem *guemr; + + /* The GUEMR register is at the same location for both slow and fast + devices, so we just use uccX.slow.guemr. */ + switch (ucc_num) { + case 0: guemr = &qe_immr->ucc1.slow.guemr; + break; + case 1: guemr = &qe_immr->ucc2.slow.guemr; + break; + case 2: guemr = &qe_immr->ucc3.slow.guemr; + break; + case 3: guemr = &qe_immr->ucc4.slow.guemr; + break; + case 4: guemr = &qe_immr->ucc5.slow.guemr; + break; + case 5: guemr = &qe_immr->ucc6.slow.guemr; + break; + case 6: guemr = &qe_immr->ucc7.slow.guemr; + break; + case 7: guemr = &qe_immr->ucc8.slow.guemr; + break; + default: + return -EINVAL; + } + + clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK, + UCC_GUEMR_SET_RESERVED3 | speed); + + return 0; +} + +static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr, + unsigned int *reg_num, unsigned int *shift) +{ + unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3); + + *reg_num = cmx + 1; + *cmxucr = &qe_immr->qmx.cmxucr[cmx]; + *shift = 16 - 8 * (ucc_num & 2); +} + +int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask) +{ + __be32 __iomem *cmxucr; + unsigned int reg_num; + unsigned int shift; + + /* check if the UCC number is in range. */ + if (ucc_num > UCC_MAX_NUM - 1) + return -EINVAL; + + get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift); + + if (set) + setbits32(cmxucr, mask << shift); + else + clrbits32(cmxucr, mask << shift); + + return 0; +} + +int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock, + enum comm_dir mode) +{ + __be32 __iomem *cmxucr; + unsigned int reg_num; + unsigned int shift; + u32 clock_bits = 0; + + /* check if the UCC number is in range. */ + if (ucc_num > UCC_MAX_NUM - 1) + return -EINVAL; + + /* The communications direction must be RX or TX */ + if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) + return -EINVAL; + + get_cmxucr_reg(ucc_num, &cmxucr, ®_num, &shift); + + switch (reg_num) { + case 1: + switch (clock) { + case QE_BRG1: clock_bits = 1; break; + case QE_BRG2: clock_bits = 2; break; + case QE_BRG7: clock_bits = 3; break; + case QE_BRG8: clock_bits = 4; break; + case QE_CLK9: clock_bits = 5; break; + case QE_CLK10: clock_bits = 6; break; + case QE_CLK11: clock_bits = 7; break; + case QE_CLK12: clock_bits = 8; break; + case QE_CLK15: clock_bits = 9; break; + case QE_CLK16: clock_bits = 10; break; + default: break; + } + break; + case 2: + switch (clock) { + case QE_BRG5: clock_bits = 1; break; + case QE_BRG6: clock_bits = 2; break; + case QE_BRG7: clock_bits = 3; break; + case QE_BRG8: clock_bits = 4; break; + case QE_CLK13: clock_bits = 5; break; + case QE_CLK14: clock_bits = 6; break; + case QE_CLK19: clock_bits = 7; break; + case QE_CLK20: clock_bits = 8; break; + case QE_CLK15: clock_bits = 9; break; + case QE_CLK16: clock_bits = 10; break; + default: break; + } + break; + case 3: + switch (clock) { + case QE_BRG9: clock_bits = 1; break; + case QE_BRG10: clock_bits = 2; break; + case QE_BRG15: clock_bits = 3; break; + case QE_BRG16: clock_bits = 4; break; + case QE_CLK3: clock_bits = 5; break; + case QE_CLK4: clock_bits = 6; break; + case QE_CLK17: clock_bits = 7; break; + case QE_CLK18: clock_bits = 8; break; + case QE_CLK7: clock_bits = 9; break; + case QE_CLK8: clock_bits = 10; break; + case QE_CLK16: clock_bits = 11; break; + default: break; + } + break; + case 4: + switch (clock) { + case QE_BRG13: clock_bits = 1; break; + case QE_BRG14: clock_bits = 2; break; + case QE_BRG15: clock_bits = 3; break; + case QE_BRG16: clock_bits = 4; break; + case QE_CLK5: clock_bits = 5; break; + case QE_CLK6: clock_bits = 6; break; + case QE_CLK21: clock_bits = 7; break; + case QE_CLK22: clock_bits = 8; break; + case QE_CLK7: clock_bits = 9; break; + case QE_CLK8: clock_bits = 10; break; + case QE_CLK16: clock_bits = 11; break; + default: break; + } + break; + default: break; + } + + /* Check for invalid combination of clock and UCC number */ + if (!clock_bits) + return -ENOENT; + + if (mode == COMM_DIR_RX) + shift += 4; + + clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift, + clock_bits << shift); + + return 0; +} diff --git a/drivers/soc/fsl/qe/ucc_fast.c b/drivers/soc/fsl/qe/ucc_fast.c new file mode 100644 index 000000000000..a7689310fe40 --- /dev/null +++ b/drivers/soc/fsl/qe/ucc_fast.c @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * QE UCC Fast API Set - UCC Fast specific routines implementations. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +void ucc_fast_dump_regs(struct ucc_fast_private * uccf) +{ + printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num); + printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs); + + printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr)); + printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr)); + printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr)); + printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr)); + printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce)); + printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm)); + printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n", + &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs)); + printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb)); + printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs)); + printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet)); + printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset)); + printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb)); + printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs)); + printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet)); + printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt)); + printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n", + &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt)); + printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n", + &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry)); + printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n", + &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr)); +} +EXPORT_SYMBOL(ucc_fast_dump_regs); + +u32 ucc_fast_get_qe_cr_subblock(int uccf_num) +{ + switch (uccf_num) { + case 0: return QE_CR_SUBBLOCK_UCCFAST1; + case 1: return QE_CR_SUBBLOCK_UCCFAST2; + case 2: return QE_CR_SUBBLOCK_UCCFAST3; + case 3: return QE_CR_SUBBLOCK_UCCFAST4; + case 4: return QE_CR_SUBBLOCK_UCCFAST5; + case 5: return QE_CR_SUBBLOCK_UCCFAST6; + case 6: return QE_CR_SUBBLOCK_UCCFAST7; + case 7: return QE_CR_SUBBLOCK_UCCFAST8; + default: return QE_CR_SUBBLOCK_INVALID; + } +} +EXPORT_SYMBOL(ucc_fast_get_qe_cr_subblock); + +void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf) +{ + out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD); +} +EXPORT_SYMBOL(ucc_fast_transmit_on_demand); + +void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode) +{ + struct ucc_fast __iomem *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Enable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr |= UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 1; + } + if (mode & COMM_DIR_RX) { + gumr |= UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 1; + } + out_be32(&uf_regs->gumr, gumr); +} +EXPORT_SYMBOL(ucc_fast_enable); + +void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode) +{ + struct ucc_fast __iomem *uf_regs; + u32 gumr; + + uf_regs = uccf->uf_regs; + + /* Disable reception and/or transmission on this UCC. */ + gumr = in_be32(&uf_regs->gumr); + if (mode & COMM_DIR_TX) { + gumr &= ~UCC_FAST_GUMR_ENT; + uccf->enabled_tx = 0; + } + if (mode & COMM_DIR_RX) { + gumr &= ~UCC_FAST_GUMR_ENR; + uccf->enabled_rx = 0; + } + out_be32(&uf_regs->gumr, gumr); +} +EXPORT_SYMBOL(ucc_fast_disable); + +int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret) +{ + struct ucc_fast_private *uccf; + struct ucc_fast __iomem *uf_regs; + u32 gumr; + int ret; + + if (!uf_info) + return -EINVAL; + + /* check if the UCC port number is in range. */ + if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { + printk(KERN_ERR "%s: illegal UCC number\n", __func__); + return -EINVAL; + } + + /* Check that 'max_rx_buf_length' is properly aligned (4). */ + if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: max_rx_buf_length not aligned\n", + __func__); + return -EINVAL; + } + + /* Validate Virtual Fifo register values */ + if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) { + printk(KERN_ERR "%s: urfs is too small\n", __func__); + return -EINVAL; + } + + if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: urfs is not aligned\n", __func__); + return -EINVAL; + } + + if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: urfet is not aligned.\n", __func__); + return -EINVAL; + } + + if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: urfset is not aligned\n", __func__); + return -EINVAL; + } + + if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: utfs is not aligned\n", __func__); + return -EINVAL; + } + + if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: utfet is not aligned\n", __func__); + return -EINVAL; + } + + if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) { + printk(KERN_ERR "%s: utftt is not aligned\n", __func__); + return -EINVAL; + } + + uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL); + if (!uccf) { + printk(KERN_ERR "%s: Cannot allocate private data\n", + __func__); + return -ENOMEM; + } + + /* Fill fast UCC structure */ + uccf->uf_info = uf_info; + /* Set the PHY base address */ + uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast)); + if (uccf->uf_regs == NULL) { + printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); + kfree(uccf); + return -ENOMEM; + } + + uccf->enabled_tx = 0; + uccf->enabled_rx = 0; + uccf->stopped_tx = 0; + uccf->stopped_rx = 0; + uf_regs = uccf->uf_regs; + uccf->p_ucce = &uf_regs->ucce; + uccf->p_uccm = &uf_regs->uccm; +#ifdef CONFIG_UGETH_TX_ON_DEMAND + uccf->p_utodr = &uf_regs->utodr; +#endif +#ifdef STATISTICS + uccf->tx_frames = 0; + uccf->rx_frames = 0; + uccf->rx_discarded = 0; +#endif /* STATISTICS */ + + /* Set UCC to fast type */ + ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST); + if (ret) { + printk(KERN_ERR "%s: cannot set UCC type\n", __func__); + ucc_fast_free(uccf); + return ret; + } + + uccf->mrblr = uf_info->max_rx_buf_length; + + /* Set GUMR */ + /* For more details see the hardware spec. */ + gumr = uf_info->ttx_trx; + if (uf_info->tci) + gumr |= UCC_FAST_GUMR_TCI; + if (uf_info->cdp) + gumr |= UCC_FAST_GUMR_CDP; + if (uf_info->ctsp) + gumr |= UCC_FAST_GUMR_CTSP; + if (uf_info->cds) + gumr |= UCC_FAST_GUMR_CDS; + if (uf_info->ctss) + gumr |= UCC_FAST_GUMR_CTSS; + if (uf_info->txsy) + gumr |= UCC_FAST_GUMR_TXSY; + if (uf_info->rsyn) + gumr |= UCC_FAST_GUMR_RSYN; + gumr |= uf_info->synl; + if (uf_info->rtsm) + gumr |= UCC_FAST_GUMR_RTSM; + gumr |= uf_info->renc; + if (uf_info->revd) + gumr |= UCC_FAST_GUMR_REVD; + gumr |= uf_info->tenc; + gumr |= uf_info->tcrc; + gumr |= uf_info->mode; + out_be32(&uf_regs->gumr, gumr); + + /* Allocate memory for Tx Virtual Fifo */ + uccf->ucc_fast_tx_virtual_fifo_base_offset = + qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) { + printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n", + __func__); + uccf->ucc_fast_tx_virtual_fifo_base_offset = 0; + ucc_fast_free(uccf); + return -ENOMEM; + } + + /* Allocate memory for Rx Virtual Fifo */ + uccf->ucc_fast_rx_virtual_fifo_base_offset = + qe_muram_alloc(uf_info->urfs + + UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR, + UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT); + if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) { + printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n", + __func__); + uccf->ucc_fast_rx_virtual_fifo_base_offset = 0; + ucc_fast_free(uccf); + return -ENOMEM; + } + + /* Set Virtual Fifo registers */ + out_be16(&uf_regs->urfs, uf_info->urfs); + out_be16(&uf_regs->urfet, uf_info->urfet); + out_be16(&uf_regs->urfset, uf_info->urfset); + out_be16(&uf_regs->utfs, uf_info->utfs); + out_be16(&uf_regs->utfet, uf_info->utfet); + out_be16(&uf_regs->utftt, uf_info->utftt); + /* utfb, urfb are offsets from MURAM base */ + out_be32(&uf_regs->utfb, uccf->ucc_fast_tx_virtual_fifo_base_offset); + out_be32(&uf_regs->urfb, uccf->ucc_fast_rx_virtual_fifo_base_offset); + + /* Mux clocking */ + /* Grant Support */ + ucc_set_qe_mux_grant(uf_info->ucc_num, uf_info->grant_support); + /* Breakpoint Support */ + ucc_set_qe_mux_bkpt(uf_info->ucc_num, uf_info->brkpt_support); + /* Set Tsa or NMSI mode. */ + ucc_set_qe_mux_tsa(uf_info->ucc_num, uf_info->tsa); + /* If NMSI (not Tsa), set Tx and Rx clock. */ + if (!uf_info->tsa) { + /* Rx clock routing */ + if ((uf_info->rx_clock != QE_CLK_NONE) && + ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock, + COMM_DIR_RX)) { + printk(KERN_ERR "%s: illegal value for RX clock\n", + __func__); + ucc_fast_free(uccf); + return -EINVAL; + } + /* Tx clock routing */ + if ((uf_info->tx_clock != QE_CLK_NONE) && + ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock, + COMM_DIR_TX)) { + printk(KERN_ERR "%s: illegal value for TX clock\n", + __func__); + ucc_fast_free(uccf); + return -EINVAL; + } + } + + /* Set interrupt mask register at UCC level. */ + out_be32(&uf_regs->uccm, uf_info->uccm_mask); + + /* First, clear anything pending at UCC level, + * otherwise, old garbage may come through + * as soon as the dam is opened. */ + + /* Writing '1' clears */ + out_be32(&uf_regs->ucce, 0xffffffff); + + *uccf_ret = uccf; + return 0; +} +EXPORT_SYMBOL(ucc_fast_init); + +void ucc_fast_free(struct ucc_fast_private * uccf) +{ + if (!uccf) + return; + + if (uccf->ucc_fast_tx_virtual_fifo_base_offset) + qe_muram_free(uccf->ucc_fast_tx_virtual_fifo_base_offset); + + if (uccf->ucc_fast_rx_virtual_fifo_base_offset) + qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset); + + if (uccf->uf_regs) + iounmap(uccf->uf_regs); + + kfree(uccf); +} +EXPORT_SYMBOL(ucc_fast_free); diff --git a/drivers/soc/fsl/qe/ucc_slow.c b/drivers/soc/fsl/qe/ucc_slow.c new file mode 100644 index 000000000000..9334bdbd9b30 --- /dev/null +++ b/drivers/soc/fsl/qe/ucc_slow.c @@ -0,0 +1,374 @@ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish + * Li Yang + * + * Description: + * QE UCC Slow API Set - UCC Slow specific routines implementations. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +u32 ucc_slow_get_qe_cr_subblock(int uccs_num) +{ + switch (uccs_num) { + case 0: return QE_CR_SUBBLOCK_UCCSLOW1; + case 1: return QE_CR_SUBBLOCK_UCCSLOW2; + case 2: return QE_CR_SUBBLOCK_UCCSLOW3; + case 3: return QE_CR_SUBBLOCK_UCCSLOW4; + case 4: return QE_CR_SUBBLOCK_UCCSLOW5; + case 5: return QE_CR_SUBBLOCK_UCCSLOW6; + case 6: return QE_CR_SUBBLOCK_UCCSLOW7; + case 7: return QE_CR_SUBBLOCK_UCCSLOW8; + default: return QE_CR_SUBBLOCK_INVALID; + } +} +EXPORT_SYMBOL(ucc_slow_get_qe_cr_subblock); + +void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_GRACEFUL_STOP_TX, id, + QE_CR_PROTOCOL_UNSPECIFIED, 0); +} +EXPORT_SYMBOL(ucc_slow_graceful_stop_tx); + +void ucc_slow_stop_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); +} +EXPORT_SYMBOL(ucc_slow_stop_tx); + +void ucc_slow_restart_tx(struct ucc_slow_private * uccs) +{ + struct ucc_slow_info *us_info = uccs->us_info; + u32 id; + + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0); +} +EXPORT_SYMBOL(ucc_slow_restart_tx); + +void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode) +{ + struct ucc_slow *us_regs; + u32 gumr_l; + + us_regs = uccs->us_regs; + + /* Enable reception and/or transmission on this UCC. */ + gumr_l = in_be32(&us_regs->gumr_l); + if (mode & COMM_DIR_TX) { + gumr_l |= UCC_SLOW_GUMR_L_ENT; + uccs->enabled_tx = 1; + } + if (mode & COMM_DIR_RX) { + gumr_l |= UCC_SLOW_GUMR_L_ENR; + uccs->enabled_rx = 1; + } + out_be32(&us_regs->gumr_l, gumr_l); +} +EXPORT_SYMBOL(ucc_slow_enable); + +void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode) +{ + struct ucc_slow *us_regs; + u32 gumr_l; + + us_regs = uccs->us_regs; + + /* Disable reception and/or transmission on this UCC. */ + gumr_l = in_be32(&us_regs->gumr_l); + if (mode & COMM_DIR_TX) { + gumr_l &= ~UCC_SLOW_GUMR_L_ENT; + uccs->enabled_tx = 0; + } + if (mode & COMM_DIR_RX) { + gumr_l &= ~UCC_SLOW_GUMR_L_ENR; + uccs->enabled_rx = 0; + } + out_be32(&us_regs->gumr_l, gumr_l); +} +EXPORT_SYMBOL(ucc_slow_disable); + +/* Initialize the UCC for Slow operations + * + * The caller should initialize the following us_info + */ +int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret) +{ + struct ucc_slow_private *uccs; + u32 i; + struct ucc_slow __iomem *us_regs; + u32 gumr; + struct qe_bd *bd; + u32 id; + u32 command; + int ret = 0; + + if (!us_info) + return -EINVAL; + + /* check if the UCC port number is in range. */ + if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { + printk(KERN_ERR "%s: illegal UCC number\n", __func__); + return -EINVAL; + } + + /* + * Set mrblr + * Check that 'max_rx_buf_length' is properly aligned (4), unless + * rfw is 1, meaning that QE accepts one byte at a time, unlike normal + * case when QE accepts 32 bits at a time. + */ + if ((!us_info->rfw) && + (us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) { + printk(KERN_ERR "max_rx_buf_length not aligned.\n"); + return -EINVAL; + } + + uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL); + if (!uccs) { + printk(KERN_ERR "%s: Cannot allocate private data\n", + __func__); + return -ENOMEM; + } + + /* Fill slow UCC structure */ + uccs->us_info = us_info; + /* Set the PHY base address */ + uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow)); + if (uccs->us_regs == NULL) { + printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__); + kfree(uccs); + return -ENOMEM; + } + + uccs->saved_uccm = 0; + uccs->p_rx_frame = 0; + us_regs = uccs->us_regs; + uccs->p_ucce = (u16 *) & (us_regs->ucce); + uccs->p_uccm = (u16 *) & (us_regs->uccm); +#ifdef STATISTICS + uccs->rx_frames = 0; + uccs->tx_frames = 0; + uccs->rx_discarded = 0; +#endif /* STATISTICS */ + + /* Get PRAM base */ + uccs->us_pram_offset = + qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM); + if (IS_ERR_VALUE(uccs->us_pram_offset)) { + printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__); + ucc_slow_free(uccs); + return -ENOMEM; + } + id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num); + qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol, + uccs->us_pram_offset); + + uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); + + /* Set UCC to slow type */ + ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW); + if (ret) { + printk(KERN_ERR "%s: cannot set UCC type", __func__); + ucc_slow_free(uccs); + return ret; + } + + out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length); + + INIT_LIST_HEAD(&uccs->confQ); + + /* Allocate BDs. */ + uccs->rx_base_offset = + qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd), + QE_ALIGNMENT_OF_BD); + if (IS_ERR_VALUE(uccs->rx_base_offset)) { + printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__, + us_info->rx_bd_ring_len); + uccs->rx_base_offset = 0; + ucc_slow_free(uccs); + return -ENOMEM; + } + + uccs->tx_base_offset = + qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd), + QE_ALIGNMENT_OF_BD); + if (IS_ERR_VALUE(uccs->tx_base_offset)) { + printk(KERN_ERR "%s: cannot allocate TX BDs", __func__); + uccs->tx_base_offset = 0; + ucc_slow_free(uccs); + return -ENOMEM; + } + + /* Init Tx bds */ + bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset); + for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) { + /* clear bd buffer */ + out_be32(&bd->buf, 0); + /* set bd status and length */ + out_be32((u32 *) bd, 0); + bd++; + } + /* for last BD set Wrap bit */ + out_be32(&bd->buf, 0); + out_be32((u32 *) bd, cpu_to_be32(T_W)); + + /* Init Rx bds */ + bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset); + for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) { + /* set bd status and length */ + out_be32((u32*)bd, 0); + /* clear bd buffer */ + out_be32(&bd->buf, 0); + bd++; + } + /* for last BD set Wrap bit */ + out_be32((u32*)bd, cpu_to_be32(R_W)); + out_be32(&bd->buf, 0); + + /* Set GUMR (For more details see the hardware spec.). */ + /* gumr_h */ + gumr = us_info->tcrc; + if (us_info->cdp) + gumr |= UCC_SLOW_GUMR_H_CDP; + if (us_info->ctsp) + gumr |= UCC_SLOW_GUMR_H_CTSP; + if (us_info->cds) + gumr |= UCC_SLOW_GUMR_H_CDS; + if (us_info->ctss) + gumr |= UCC_SLOW_GUMR_H_CTSS; + if (us_info->tfl) + gumr |= UCC_SLOW_GUMR_H_TFL; + if (us_info->rfw) + gumr |= UCC_SLOW_GUMR_H_RFW; + if (us_info->txsy) + gumr |= UCC_SLOW_GUMR_H_TXSY; + if (us_info->rtsm) + gumr |= UCC_SLOW_GUMR_H_RTSM; + out_be32(&us_regs->gumr_h, gumr); + + /* gumr_l */ + gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc | + us_info->diag | us_info->mode; + if (us_info->tci) + gumr |= UCC_SLOW_GUMR_L_TCI; + if (us_info->rinv) + gumr |= UCC_SLOW_GUMR_L_RINV; + if (us_info->tinv) + gumr |= UCC_SLOW_GUMR_L_TINV; + if (us_info->tend) + gumr |= UCC_SLOW_GUMR_L_TEND; + out_be32(&us_regs->gumr_l, gumr); + + /* Function code registers */ + + /* if the data is in cachable memory, the 'global' */ + /* in the function code should be set. */ + uccs->us_pram->tbmr = UCC_BMR_BO_BE; + uccs->us_pram->rbmr = UCC_BMR_BO_BE; + + /* rbase, tbase are offsets from MURAM base */ + out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset); + out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset); + + /* Mux clocking */ + /* Grant Support */ + ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support); + /* Breakpoint Support */ + ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support); + /* Set Tsa or NMSI mode. */ + ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa); + /* If NMSI (not Tsa), set Tx and Rx clock. */ + if (!us_info->tsa) { + /* Rx clock routing */ + if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock, + COMM_DIR_RX)) { + printk(KERN_ERR "%s: illegal value for RX clock\n", + __func__); + ucc_slow_free(uccs); + return -EINVAL; + } + /* Tx clock routing */ + if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock, + COMM_DIR_TX)) { + printk(KERN_ERR "%s: illegal value for TX clock\n", + __func__); + ucc_slow_free(uccs); + return -EINVAL; + } + } + + /* Set interrupt mask register at UCC level. */ + out_be16(&us_regs->uccm, us_info->uccm_mask); + + /* First, clear anything pending at UCC level, + * otherwise, old garbage may come through + * as soon as the dam is opened. */ + + /* Writing '1' clears */ + out_be16(&us_regs->ucce, 0xffff); + + /* Issue QE Init command */ + if (us_info->init_tx && us_info->init_rx) + command = QE_INIT_TX_RX; + else if (us_info->init_tx) + command = QE_INIT_TX; + else + command = QE_INIT_RX; /* We know at least one is TRUE */ + + qe_issue_cmd(command, id, us_info->protocol, 0); + + *uccs_ret = uccs; + return 0; +} +EXPORT_SYMBOL(ucc_slow_init); + +void ucc_slow_free(struct ucc_slow_private * uccs) +{ + if (!uccs) + return; + + if (uccs->rx_base_offset) + qe_muram_free(uccs->rx_base_offset); + + if (uccs->tx_base_offset) + qe_muram_free(uccs->tx_base_offset); + + if (uccs->us_pram) + qe_muram_free(uccs->us_pram_offset); + + if (uccs->us_regs) + iounmap(uccs->us_regs); + + kfree(uccs); +} +EXPORT_SYMBOL(ucc_slow_free); + diff --git a/drivers/soc/fsl/qe/usb.c b/drivers/soc/fsl/qe/usb.c new file mode 100644 index 000000000000..111f7ab80f04 --- /dev/null +++ b/drivers/soc/fsl/qe/usb.c @@ -0,0 +1,56 @@ +/* + * QE USB routines + * + * Copyright 2006 Freescale Semiconductor, Inc. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +int qe_usb_clock_set(enum qe_clock clk, int rate) +{ + struct qe_mux __iomem *mux = &qe_immr->qmx; + unsigned long flags; + u32 val; + + switch (clk) { + case QE_CLK3: val = QE_CMXGCR_USBCS_CLK3; break; + case QE_CLK5: val = QE_CMXGCR_USBCS_CLK5; break; + case QE_CLK7: val = QE_CMXGCR_USBCS_CLK7; break; + case QE_CLK9: val = QE_CMXGCR_USBCS_CLK9; break; + case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break; + case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break; + case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break; + case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break; + case QE_BRG9: val = QE_CMXGCR_USBCS_BRG9; break; + case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break; + default: + pr_err("%s: requested unknown clock %d\n", __func__, clk); + return -EINVAL; + } + + if (qe_clock_is_brg(clk)) + qe_setbrg(clk, rate, 1); + + spin_lock_irqsave(&cmxgcr_lock, flags); + + clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val); + + spin_unlock_irqrestore(&cmxgcr_lock, flags); + + return 0; +} +EXPORT_SYMBOL(qe_usb_clock_set); diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index 896add8cfd3b..8f7b26ec181e 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -16,7 +16,7 @@ * option) any later version. */ #include -#include +#include #include #include #include diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 73190f5d2832..1a7dc3c590b1 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -31,7 +31,7 @@ #include #include -#include +#include #include #include diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c index 5fb6f8b4f0b4..53c0692f1b09 100644 --- a/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -38,7 +38,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index c6cebb96fd21..0960f41f945a 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include "fhci.h" diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c index 3bacdd7befe9..60d55eb3de0d 100644 --- a/drivers/usb/host/fhci-hub.c +++ b/drivers/usb/host/fhci-hub.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include "fhci.h" /* virtual root hub specific descriptor */ diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c index 95ca5986e672..a9609a336efe 100644 --- a/drivers/usb/host/fhci-sched.c +++ b/drivers/usb/host/fhci-sched.c @@ -25,7 +25,7 @@ #include #include #include -#include +#include #include #include "fhci.h" diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index 154e6a007727..3fc82c1c3c73 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -27,8 +27,8 @@ #include #include #include -#include -#include +#include +#include #define USB_CLOCK 48000000 -- cgit From 7b8ad495d59280b634a7b546f4cdf58cf4d65f61 Mon Sep 17 00:00:00 2001 From: Vaibhav Jain Date: Tue, 24 Nov 2015 16:26:18 +0530 Subject: cxl: Fix DSI misses when the context owning task exits Presently when a user-space process issues CXL_IOCTL_START_WORK ioctl we store the pid of the current task_struct and use it to get pointer to the mm_struct of the process, while processing page or segment faults from the capi card. However this causes issues when the thread that had originally issued the start-work ioctl exits in which case the stored pid is no more valid and the cxl driver is unable to handle faults as the mm_struct corresponding to process is no more accessible. This patch fixes this issue by using the mm_struct of the next alive task in the thread group. This is done by iterating over all the tasks in the thread group starting from thread group leader and calling get_task_mm on each one of them. When a valid mm_struct is obtained the pid of the associated task is stored in the context replacing the exiting one for handling future faults. The patch introduces a new function named get_mem_context that checks if the current task pointed to by ctx->pid is dead? If yes it performs the steps described above. Also a new variable cxl_context.glpid is introduced which stores the pid of the thread group leader associated with the context owning task. Reported-by: Matthew R. Ochs Reported-by: Frank Haverkamp Suggested-by: Ian Munsie Signed-off-by: Vaibhav Jain Acked-by: Ian Munsie Reviewed-by: Frederic Barrat Reviewed-by: Matthew R. Ochs Signed-off-by: Michael Ellerman --- drivers/misc/cxl/api.c | 2 +- drivers/misc/cxl/context.c | 6 ++- drivers/misc/cxl/cxl.h | 3 ++ drivers/misc/cxl/fault.c | 129 +++++++++++++++++++++++++++++++++------------ drivers/misc/cxl/file.c | 6 ++- 5 files changed, 109 insertions(+), 37 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c index a6543aefa299..ea3eeb7011e1 100644 --- a/drivers/misc/cxl/api.c +++ b/drivers/misc/cxl/api.c @@ -172,7 +172,7 @@ int cxl_start_context(struct cxl_context *ctx, u64 wed, if (task) { ctx->pid = get_task_pid(task, PIDTYPE_PID); - get_pid(ctx->pid); + ctx->glpid = get_task_pid(task->group_leader, PIDTYPE_PID); kernel = false; } diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c index 6dde7a9d6a7e..262b88eac414 100644 --- a/drivers/misc/cxl/context.c +++ b/drivers/misc/cxl/context.c @@ -42,7 +42,7 @@ int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master, spin_lock_init(&ctx->sste_lock); ctx->afu = afu; ctx->master = master; - ctx->pid = NULL; /* Set in start work ioctl */ + ctx->pid = ctx->glpid = NULL; /* Set in start work ioctl */ mutex_init(&ctx->mapping_lock); ctx->mapping = mapping; @@ -217,7 +217,11 @@ int __detach_context(struct cxl_context *ctx) WARN_ON(cxl_detach_process(ctx) && cxl_adapter_link_ok(ctx->afu->adapter)); flush_work(&ctx->fault_work); /* Only needed for dedicated process */ + + /* release the reference to the group leader and mm handling pid */ put_pid(ctx->pid); + put_pid(ctx->glpid); + cxl_ctx_put(); return 0; } diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h index 25ae57fa79b0..a521bc72cec2 100644 --- a/drivers/misc/cxl/cxl.h +++ b/drivers/misc/cxl/cxl.h @@ -445,6 +445,9 @@ struct cxl_context { unsigned int sst_size, sst_lru; wait_queue_head_t wq; + /* pid of the group leader associated with the pid */ + struct pid *glpid; + /* use mm context associated with this pid for ds faults */ struct pid *pid; spinlock_t lock; /* Protects pending_irq_mask, pending_fault and fault_addr */ /* Only used in PR mode */ diff --git a/drivers/misc/cxl/fault.c b/drivers/misc/cxl/fault.c index 25a5418c55cb..81c3f75b7330 100644 --- a/drivers/misc/cxl/fault.c +++ b/drivers/misc/cxl/fault.c @@ -166,13 +166,92 @@ static void cxl_handle_page_fault(struct cxl_context *ctx, cxl_ack_irq(ctx, CXL_PSL_TFC_An_R, 0); } +/* + * Returns the mm_struct corresponding to the context ctx via ctx->pid + * In case the task has exited we use the task group leader accessible + * via ctx->glpid to find the next task in the thread group that has a + * valid mm_struct associated with it. If a task with valid mm_struct + * is found the ctx->pid is updated to use the task struct for subsequent + * translations. In case no valid mm_struct is found in the task group to + * service the fault a NULL is returned. + */ +static struct mm_struct *get_mem_context(struct cxl_context *ctx) +{ + struct task_struct *task = NULL; + struct mm_struct *mm = NULL; + struct pid *old_pid = ctx->pid; + + if (old_pid == NULL) { + pr_warn("%s: Invalid context for pe=%d\n", + __func__, ctx->pe); + return NULL; + } + + task = get_pid_task(old_pid, PIDTYPE_PID); + + /* + * pid_alive may look racy but this saves us from costly + * get_task_mm when the task is a zombie. In worst case + * we may think a task is alive, which is about to die + * but get_task_mm will return NULL. + */ + if (task != NULL && pid_alive(task)) + mm = get_task_mm(task); + + /* release the task struct that was taken earlier */ + if (task) + put_task_struct(task); + else + pr_devel("%s: Context owning pid=%i for pe=%i dead\n", + __func__, pid_nr(old_pid), ctx->pe); + + /* + * If we couldn't find the mm context then use the group + * leader to iterate over the task group and find a task + * that gives us mm_struct. + */ + if (unlikely(mm == NULL && ctx->glpid != NULL)) { + + rcu_read_lock(); + task = pid_task(ctx->glpid, PIDTYPE_PID); + if (task) + do { + mm = get_task_mm(task); + if (mm) { + ctx->pid = get_task_pid(task, + PIDTYPE_PID); + break; + } + task = next_thread(task); + } while (task && !thread_group_leader(task)); + rcu_read_unlock(); + + /* check if we switched pid */ + if (ctx->pid != old_pid) { + if (mm) + pr_devel("%s:pe=%i switch pid %i->%i\n", + __func__, ctx->pe, pid_nr(old_pid), + pid_nr(ctx->pid)); + else + pr_devel("%s:Cannot find mm for pid=%i\n", + __func__, pid_nr(old_pid)); + + /* drop the reference to older pid */ + put_pid(old_pid); + } + } + + return mm; +} + + + void cxl_handle_fault(struct work_struct *fault_work) { struct cxl_context *ctx = container_of(fault_work, struct cxl_context, fault_work); u64 dsisr = ctx->dsisr; u64 dar = ctx->dar; - struct task_struct *task = NULL; struct mm_struct *mm = NULL; if (cxl_p2n_read(ctx->afu, CXL_PSL_DSISR_An) != dsisr || @@ -195,17 +274,17 @@ void cxl_handle_fault(struct work_struct *fault_work) "DSISR: %#llx DAR: %#llx\n", ctx->pe, dsisr, dar); if (!ctx->kernel) { - if (!(task = get_pid_task(ctx->pid, PIDTYPE_PID))) { - pr_devel("cxl_handle_fault unable to get task %i\n", - pid_nr(ctx->pid)); + + mm = get_mem_context(ctx); + /* indicates all the thread in task group have exited */ + if (mm == NULL) { + pr_devel("%s: unable to get mm for pe=%d pid=%i\n", + __func__, ctx->pe, pid_nr(ctx->pid)); cxl_ack_ae(ctx); return; - } - if (!(mm = get_task_mm(task))) { - pr_devel("cxl_handle_fault unable to get mm %i\n", - pid_nr(ctx->pid)); - cxl_ack_ae(ctx); - goto out; + } else { + pr_devel("Handling page fault for pe=%d pid=%i\n", + ctx->pe, pid_nr(ctx->pid)); } } @@ -218,33 +297,22 @@ void cxl_handle_fault(struct work_struct *fault_work) if (mm) mmput(mm); -out: - if (task) - put_task_struct(task); } static void cxl_prefault_one(struct cxl_context *ctx, u64 ea) { - int rc; - struct task_struct *task; struct mm_struct *mm; - if (!(task = get_pid_task(ctx->pid, PIDTYPE_PID))) { - pr_devel("cxl_prefault_one unable to get task %i\n", - pid_nr(ctx->pid)); - return; - } - if (!(mm = get_task_mm(task))) { + mm = get_mem_context(ctx); + if (mm == NULL) { pr_devel("cxl_prefault_one unable to get mm %i\n", pid_nr(ctx->pid)); - put_task_struct(task); return; } - rc = cxl_fault_segment(ctx, mm, ea); + cxl_fault_segment(ctx, mm, ea); mmput(mm); - put_task_struct(task); } static u64 next_segment(u64 ea, u64 vsid) @@ -263,18 +331,13 @@ static void cxl_prefault_vma(struct cxl_context *ctx) struct copro_slb slb; struct vm_area_struct *vma; int rc; - struct task_struct *task; struct mm_struct *mm; - if (!(task = get_pid_task(ctx->pid, PIDTYPE_PID))) { - pr_devel("cxl_prefault_vma unable to get task %i\n", - pid_nr(ctx->pid)); - return; - } - if (!(mm = get_task_mm(task))) { + mm = get_mem_context(ctx); + if (mm == NULL) { pr_devel("cxl_prefault_vm unable to get mm %i\n", pid_nr(ctx->pid)); - goto out1; + return; } down_read(&mm->mmap_sem); @@ -295,8 +358,6 @@ static void cxl_prefault_vma(struct cxl_context *ctx) up_read(&mm->mmap_sem); mmput(mm); -out1: - put_task_struct(task); } void cxl_prefault(struct cxl_context *ctx, u64 wed) diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c index 5cc14599837d..783337d22f36 100644 --- a/drivers/misc/cxl/file.c +++ b/drivers/misc/cxl/file.c @@ -201,8 +201,12 @@ static long afu_ioctl_start_work(struct cxl_context *ctx, * where a process (master, some daemon, etc) has opened the chardev on * behalf of another process, so the AFU's mm gets bound to the process * that performs this ioctl and not the process that opened the file. + * Also we grab the PID of the group leader so that if the task that + * has performed the attach operation exits the mm context of the + * process is still accessible. */ - ctx->pid = get_pid(get_task_pid(current, PIDTYPE_PID)); + ctx->pid = get_task_pid(current, PIDTYPE_PID); + ctx->glpid = get_task_pid(current->group_leader, PIDTYPE_PID); trace_cxl_attach(ctx, work.work_element_descriptor, work.num_interrupts, amr); -- cgit From aa09545589ceeff884421d8eb38d04963190afbe Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 8 Jan 2016 10:30:09 -0800 Subject: cxl: fix build for GCC 4.6.x GCC 4.6.3 does not support -Wno-unused-const-variable. Instead, use the kbuild infrastructure that checks if this options exists. Fixes: 2cd55c68c0a4 ("cxl: Fix build failure due to -Wunused-variable behaviour change") Suggested-by: Michal Marek Suggested-by: Arnd Bergmann Signed-off-by: Brian Norris Signed-off-by: Michael Ellerman --- drivers/misc/cxl/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/cxl/Makefile b/drivers/misc/cxl/Makefile index 6982f603fadc..ab6f392d3504 100644 --- a/drivers/misc/cxl/Makefile +++ b/drivers/misc/cxl/Makefile @@ -1,4 +1,4 @@ -ccflags-y := -Werror -Wno-unused-const-variable +ccflags-y := -Werror $(call cc-disable-warning, unused-const-variable) cxl-y += main.o file.o irq.o fault.o native.o cxl-y += context.o sysfs.o debugfs.o pci.o trace.o -- cgit From 57f7c3932516b9f7908d9b0a24396112d0f4ca55 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 8 Jan 2016 10:30:10 -0800 Subject: cxl: use -Werror only with CONFIG_PPC_WERROR Some developers really like to have -Werror enabled for their code, as it helps to ensure warning free code. Others don't want -Werror, as it (for example) can cause problems when newer (or older) compilers have different sets of warnings, or new warnings can appear just when turning up the warning level (e.g., make W=1 or W=2). Thus, it seems prudent to have the use of -Werror be configurable. It so happens that cxl is only built on PowerPC, and PowerPC already has a nice set of Kconfig options for this, under CONFIG_PPC_WERROR. So let's use that, and the world is a happy place again! (Note that PPC_WERROR defaults to =y, so the common case compile should still be enforcing -Werror.) Fixes: d3d73f4b38a8 ("cxl: Compile with -Werror") Signed-off-by: Brian Norris Signed-off-by: Michael Ellerman --- drivers/misc/cxl/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/cxl/Makefile b/drivers/misc/cxl/Makefile index ab6f392d3504..be2ac5ce349f 100644 --- a/drivers/misc/cxl/Makefile +++ b/drivers/misc/cxl/Makefile @@ -1,4 +1,5 @@ -ccflags-y := -Werror $(call cc-disable-warning, unused-const-variable) +ccflags-y := $(call cc-disable-warning, unused-const-variable) +ccflags-$(CONFIG_PPC_WERROR) += -Werror cxl-y += main.o file.o irq.o fault.o native.o cxl-y += context.o sysfs.o debugfs.o pci.o trace.o -- cgit From 68adb7bfd66504e97364651fb7dac3f9c8aa8561 Mon Sep 17 00:00:00 2001 From: Uma Krishnan Date: Mon, 7 Dec 2015 16:03:32 -0600 Subject: cxl: Enable PCI device ID for future IBM CXL adapter Add support for future IBM Coherent Accelerator (CXL) device with ID of 0x0601. Signed-off-by: Uma Krishnan Reviewed-by: Matthew R. Ochs Signed-off-by: Michael Ellerman --- drivers/misc/cxl/pci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c index 85761d7eb333..4c1903f781fc 100644 --- a/drivers/misc/cxl/pci.c +++ b/drivers/misc/cxl/pci.c @@ -138,6 +138,7 @@ static const struct pci_device_id cxl_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x0477), }, { PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x044b), }, { PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x04cf), }, + { PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x0601), }, { PCI_DEVICE_CLASS(0x120000, ~0), }, { } -- cgit