From 69226896ad636b94f6d2e55d75ff21a29c4de83b Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Fri, 21 Apr 2017 16:15:38 +0300 Subject: mdio_bus: Issue GPIO RESET to PHYs. Some boards [1] leave the PHYs at an invalid state during system power-up or reset thus causing unreliability issues with the PHY which manifests as PHY not being detected or link not functional. To fix this, these PHYs need to be RESET via a GPIO connected to the PHY's RESET pin. Some boards have a single GPIO controlling the PHY RESET pin of all PHYs on the bus whereas some others have separate GPIOs controlling individual PHY RESETs. In both cases, the RESET de-assertion cannot be done in the PHY driver as the PHY will not probe till its reset is de-asserted. So do the RESET de-assertion in the MDIO bus driver. [1] - am572x-idk, am571x-idk, a437x-idk Signed-off-by: Roger Quadros Signed-off-by: David S. Miller --- include/linux/phy.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 624cecf69c28..37ca77d86983 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -217,6 +217,13 @@ struct mii_bus { * matching its address */ int irq[PHY_MAX_ADDR]; + + /* GPIO reset pulse width in microseconds */ + int reset_delay_us; + /* Number of reset GPIOs */ + int num_reset_gpios; + /* Array of RESET GPIO descriptors */ + struct gpio_desc **reset_gpiod; }; #define to_mii_bus(d) container_of(d, struct mii_bus, dev) -- cgit