From abf35df21513c51d7761c41fa6d3b819cdf4103e Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 9 Mar 2010 09:17:42 +0000 Subject: NET: Support clause 45 MDIO commands at the MDIO bus level IEEE 802.3ae clause 45 specifies a somewhat modified MDIO protocol for use by 10GIGE phys. The main change is a 21 bit address split into a 5 bit device ID and a 16 bit register offset. The definition is designed so that normal and extended devices can run on the same MDIO bus. Extend mdio-bitbang to do the new protocol. At the MDIO bus level the protocol is requested by or'ing MII_ADDR_C45 into the register offset. Make phy_read/phy_write/etc pass a full 32 bit register offset. This does not attempt to make the phy layer support C45 style PHYs, just to provide the MDIO bus support. Tested against a Broadcom 10GE phy with ID 0x206034, and several Broadcom 10/100/1000 Phys in normal mode. Signed-off-by: Jason Gunthorpe Signed-off-by: David S. Miller --- include/linux/phy.h | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 14d7fdf6a90a..d9bce4b526b4 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -81,6 +81,10 @@ typedef enum { */ #define MII_BUS_ID_SIZE (20 - 3) +/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit + IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ +#define MII_ADDR_C45 (1<<30) + /* * The Bus class for PHYs. Devices which provide access to * PHYs should register using this structure @@ -127,8 +131,8 @@ int mdiobus_register(struct mii_bus *bus); void mdiobus_unregister(struct mii_bus *bus); void mdiobus_free(struct mii_bus *bus); struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); -int mdiobus_read(struct mii_bus *bus, int addr, u16 regnum); -int mdiobus_write(struct mii_bus *bus, int addr, u16 regnum, u16 val); +int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum); +int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val); #define PHY_INTERRUPT_DISABLED 0x0 @@ -422,7 +426,7 @@ struct phy_fixup { * because the bus read/write functions may wait for an interrupt * to conclude the operation. */ -static inline int phy_read(struct phy_device *phydev, u16 regnum) +static inline int phy_read(struct phy_device *phydev, u32 regnum) { return mdiobus_read(phydev->bus, phydev->addr, regnum); } @@ -437,7 +441,7 @@ static inline int phy_read(struct phy_device *phydev, u16 regnum) * because the bus read/write functions may wait for an interrupt * to conclude the operation. */ -static inline int phy_write(struct phy_device *phydev, u16 regnum, u16 val) +static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) { return mdiobus_write(phydev->bus, phydev->addr, regnum, val); } -- cgit From 8626d3b4328061f5b82b11ae1d6918a0c3602f42 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 2 Apr 2010 01:05:27 +0000 Subject: phylib: Support phy module autoloading We don't use the normal hotplug mechanism because it doesn't work. It will load the module some time after the device appears, but that's not good enough for us -- we need the driver loaded _immediately_ because otherwise the NIC driver may just abort and then the phy 'device' goes away. [bwh: s/phy/mdio/ in module alias, kerneldoc for struct mdio_device_id] Signed-off-by: David Woodhouse Signed-off-by: Ben Hutchings Acked-by: Andy Fleming Signed-off-by: David S. Miller --- include/linux/phy.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index d9bce4b526b4..987e111f7b11 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -24,6 +24,7 @@ #include #include #include +#include #include -- cgit