From 8796c8923d9c4297723ae51c832ea166964970c1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 1 Dec 2017 10:24:47 +0000 Subject: phylink: add documentation for kernel APIs Add kernel-doc documentation for phylink kernel APIs, and link it into the networking kapi documentation under "Network device support". Signed-off-by: Russell King Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- include/linux/phylink.h | 183 +++++++++++++++++++++++++++++++++++------------- 1 file changed, 135 insertions(+), 48 deletions(-) (limited to 'include/linux/phylink.h') diff --git a/include/linux/phylink.h b/include/linux/phylink.h index 4d0f42da9078..30e9d0070377 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -28,10 +28,23 @@ static inline bool phylink_autoneg_inband(unsigned int mode) return mode == MLO_AN_INBAND; } +/** + * struct phylink_link_state - link state structure + * @advertising: ethtool bitmask containing advertised link modes + * @lp_advertising: ethtool bitmask containing link partner advertised link + * modes + * @interface: link &typedef phy_interface_t mode + * @speed: link speed, one of the SPEED_* constants. + * @duplex: link duplex mode, one of DUPLEX_* constants. + * @pause: link pause state, described by MLO_PAUSE_* constants. + * @link: true if the link is up. + * @an_enabled: true if autonegotiation is enabled/desired. + * @an_complete: true if autonegotiation has completed. + */ struct phylink_link_state { __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising); - phy_interface_t interface; /* PHY_INTERFACE_xxx */ + phy_interface_t interface; int speed; int duplex; int pause; @@ -40,61 +53,135 @@ struct phylink_link_state { unsigned int an_complete:1; }; +/** + * struct phylink_mac_ops - MAC operations structure. + * @validate: Validate and update the link configuration. + * @mac_link_state: Read the current link state from the hardware. + * @mac_config: configure the MAC for the selected mode and state. + * @mac_an_restart: restart 802.3z BaseX autonegotiation. + * @mac_link_down: take the link down. + * @mac_link_up: allow the link to come up. + * + * The individual methods are described more fully below. + */ struct phylink_mac_ops { - /** - * validate: validate and update the link configuration - * @ndev: net_device structure associated with MAC - * @config: configuration to validate - * - * Update the %config->supported and %config->advertised masks - * clearing bits that can not be supported. - * - * Note: the PHY may be able to transform from one connection - * technology to another, so, eg, don't clear 1000BaseX just - * because the MAC is unable to support it. This is more about - * clearing unsupported speeds and duplex settings. - * - * If the %config->interface mode is %PHY_INTERFACE_MODE_1000BASEX - * or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode - * based on %config->advertised and/or %config->speed. - */ void (*validate)(struct net_device *ndev, unsigned long *supported, struct phylink_link_state *state); - - /* Read the current link state from the hardware */ - int (*mac_link_state)(struct net_device *, struct phylink_link_state *); - - /* Configure the MAC */ - /** - * mac_config: configure the MAC for the selected mode and state - * @ndev: net_device structure for the MAC - * @mode: one of MLO_AN_FIXED, MLO_AN_PHY, MLO_AN_INBAND - * @state: state structure - * - * The action performed depends on the currently selected mode: - * - * %MLO_AN_FIXED, %MLO_AN_PHY: - * set the specified speed, duplex, pause mode, and phy interface - * mode in the provided @state. - * %MLO_AN_INBAND: - * place the link in an inband negotiation mode (such as - * 1000base-X or Cisco SGMII mode depending on the phy interface - * mode), advertising the parameters given in advertising in @state. - */ + int (*mac_link_state)(struct net_device *ndev, + struct phylink_link_state *state); void (*mac_config)(struct net_device *ndev, unsigned int mode, const struct phylink_link_state *state); - - /** - * mac_an_restart: restart 802.3z BaseX autonegotiation - * @ndev: net_device structure for the MAC - */ void (*mac_an_restart)(struct net_device *ndev); - - void (*mac_link_down)(struct net_device *, unsigned int mode); - void (*mac_link_up)(struct net_device *, unsigned int mode, - struct phy_device *); + void (*mac_link_down)(struct net_device *ndev, unsigned int mode); + void (*mac_link_up)(struct net_device *ndev, unsigned int mode, + struct phy_device *phy); }; +#if 0 /* For kernel-doc purposes only. */ +/** + * validate - Validate and update the link configuration + * @ndev: a pointer to a &struct net_device for the MAC. + * @supported: ethtool bitmask for supported link modes. + * @state: a pointer to a &struct phylink_link_state. + * + * Clear bits in the @supported and @state->advertising masks that + * are not supportable by the MAC. + * + * Note that the PHY may be able to transform from one connection + * technology to another, so, eg, don't clear 1000BaseX just + * because the MAC is unable to BaseX mode. This is more about + * clearing unsupported speeds and duplex settings. + * + * If the @state->interface mode is %PHY_INTERFACE_MODE_1000BASEX + * or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode + * based on @state->advertising and/or @state->speed and update + * @state->interface accordingly. + */ +void validate(struct net_device *ndev, unsigned long *supported, + struct phylink_link_state *state); + +/** + * mac_link_state() - Read the current link state from the hardware + * @ndev: a pointer to a &struct net_device for the MAC. + * @state: a pointer to a &struct phylink_link_state. + * + * Read the current link state from the MAC, reporting the current + * speed in @state->speed, duplex mode in @state->duplex, pause mode + * in @state->pause using the %MLO_PAUSE_RX and %MLO_PAUSE_TX bits, + * negotiation completion state in @state->an_complete, and link + * up state in @state->link. + */ +int mac_link_state(struct net_device *ndev, + struct phylink_link_state *state); + +/** + * mac_config() - configure the MAC for the selected mode and state + * @ndev: a pointer to a &struct net_device for the MAC. + * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND. + * @state: a pointer to a &struct phylink_link_state. + * + * The action performed depends on the currently selected mode: + * + * %MLO_AN_FIXED, %MLO_AN_PHY: + * Configure the specified @state->speed, @state->duplex and + * @state->pause (%MLO_PAUSE_TX / %MLO_PAUSE_RX) mode. + * + * %MLO_AN_INBAND: + * place the link in an inband negotiation mode (such as 802.3z + * 1000base-X or Cisco SGMII mode depending on the @state->interface + * mode). In both cases, link state management (whether the link + * is up or not) is performed by the MAC, and reported via the + * mac_link_state() callback. Changes in link state must be made + * by calling phylink_mac_change(). + * + * If in 802.3z mode, the link speed is fixed, dependent on the + * @state->interface. Duplex is negotiated, and pause is advertised + * according to @state->an_enabled, @state->pause and + * @state->advertising flags. Beware of MACs which only support full + * duplex at gigabit and higher speeds. + * + * If in Cisco SGMII mode, the link speed and duplex mode are passed + * in the serial bitstream 16-bit configuration word, and the MAC + * should be configured to read these bits and acknowledge the + * configuration word. Nothing is advertised by the MAC. The MAC is + * responsible for reading the configuration word and configuring + * itself accordingly. + */ +void mac_config(struct net_device *ndev, unsigned int mode, + const struct phylink_link_state *state); + +/** + * mac_an_restart() - restart 802.3z BaseX autonegotiation + * @ndev: a pointer to a &struct net_device for the MAC. + */ +void mac_an_restart(struct net_device *ndev); + +/** + * mac_link_down() - take the link down + * @ndev: a pointer to a &struct net_device for the MAC. + * @mode: link autonegotiation mode + * + * If @mode is not an in-band negotiation mode (as defined by + * phylink_autoneg_inband()), force the link down and disable any + * Energy Efficient Ethernet MAC configuration. + */ +void mac_link_down(struct net_device *ndev, unsigned int mode); + +/** + * mac_link_up() - allow the link to come up + * @ndev: a pointer to a &struct net_device for the MAC. + * @mode: link autonegotiation mode + * @phy: any attached phy + * + * If @mode is not an in-band negotiation mode (as defined by + * phylink_autoneg_inband()), allow the link to come up. If @phy + * is non-%NULL, configure Energy Efficient Ethernet by calling + * phy_init_eee() and perform appropriate MAC configuration for EEE. + */ +void mac_link_up(struct net_device *ndev, unsigned int mode, + struct phy_device *phy); +#endif + struct phylink *phylink_create(struct net_device *, struct device_node *, phy_interface_t iface, const struct phylink_mac_ops *ops); void phylink_destroy(struct phylink *); -- cgit