From 7b7d8982f0169d5ac67c6c2877449fb7f6968cac Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 27 Jul 2014 14:31:53 -0700 Subject: mtd: fix linux/mtd/nand.h kernel-doc warning Fix kernel-doc warning in : Warning(..//include/linux/mtd/nand.h:795): No description found for parameter 'ecc' Signed-off-by: Randy Dunlap Cc: David Woodhouse Cc: Brian Norris Cc: linux-mtd@lists.infradead.org Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 3083c53e0270..b7c11991cb09 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -766,6 +766,7 @@ struct nand_chip { * @options: stores various chip bit options * @id_len: The valid length of the @id. * @oobsize: OOB size + * @ecc: ECC correctability and step information from the datasheet. * @ecc.strength_ds: The ECC correctability from the datasheet, same as the * @ecc_strength_ds in nand_chip{}. * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the -- cgit From 31f754628cbb12c983600f22d9f0fed50dfe2134 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 21 Jul 2014 19:07:22 -0700 Subject: mtd: use __packed shorthand Signed-off-by: Brian Norris --- include/linux/mtd/cfi.h | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'include') diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 37ef6b194089..299d7d31fe53 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -153,7 +153,7 @@ struct cfi_ident { uint16_t MaxBufWriteSize; uint8_t NumEraseRegions; uint32_t EraseRegionInfo[0]; /* Not host ordered */ -} __attribute__((packed)); +} __packed; /* Extended Query Structure for both PRI and ALT */ @@ -161,7 +161,7 @@ struct cfi_extquery { uint8_t pri[3]; uint8_t MajorVersion; uint8_t MinorVersion; -} __attribute__((packed)); +} __packed; /* Vendor-Specific PRI for Intel/Sharp Extended Command Set (0x0001) */ @@ -180,7 +180,7 @@ struct cfi_pri_intelext { uint8_t FactProtRegSize; uint8_t UserProtRegSize; uint8_t extra[0]; -} __attribute__((packed)); +} __packed; struct cfi_intelext_otpinfo { uint32_t ProtRegAddr; @@ -188,7 +188,7 @@ struct cfi_intelext_otpinfo { uint8_t FactProtRegSize; uint16_t UserGroups; uint8_t UserProtRegSize; -} __attribute__((packed)); +} __packed; struct cfi_intelext_blockinfo { uint16_t NumIdentBlocks; @@ -196,7 +196,7 @@ struct cfi_intelext_blockinfo { uint16_t MinBlockEraseCycles; uint8_t BitsPerCell; uint8_t BlockCap; -} __attribute__((packed)); +} __packed; struct cfi_intelext_regioninfo { uint16_t NumIdentPartitions; @@ -205,7 +205,7 @@ struct cfi_intelext_regioninfo { uint8_t NumOpAllowedSimEraMode; uint8_t NumBlockTypes; struct cfi_intelext_blockinfo BlockTypes[1]; -} __attribute__((packed)); +} __packed; struct cfi_intelext_programming_regioninfo { uint8_t ProgRegShift; @@ -214,7 +214,7 @@ struct cfi_intelext_programming_regioninfo { uint8_t Reserved2; uint8_t ControlInvalid; uint8_t Reserved3; -} __attribute__((packed)); +} __packed; /* Vendor-Specific PRI for AMD/Fujitsu Extended Command Set (0x0002) */ @@ -233,7 +233,7 @@ struct cfi_pri_amdstd { uint8_t VppMin; uint8_t VppMax; uint8_t TopBottom; -} __attribute__((packed)); +} __packed; /* Vendor-Specific PRI for Atmel chips (command set 0x0002) */ @@ -245,18 +245,18 @@ struct cfi_pri_atmel { uint8_t BottomBoot; uint8_t BurstMode; uint8_t PageMode; -} __attribute__((packed)); +} __packed; struct cfi_pri_query { uint8_t NumFields; uint32_t ProtField[1]; /* Not host ordered */ -} __attribute__((packed)); +} __packed; struct cfi_bri_query { uint8_t PageModeReadCap; uint8_t NumFields; uint32_t ConfField[1]; /* Not host ordered */ -} __attribute__((packed)); +} __packed; #define P_ID_NONE 0x0000 #define P_ID_INTEL_EXT 0x0001 -- cgit From fef775caa705255358cdf7bbaf9bbc2fd1111761 Mon Sep 17 00:00:00 2001 From: Ezequiel García Date: Thu, 11 Sep 2014 12:02:08 -0300 Subject: nand: omap2: Add support for flash-based bad block table This commit adds a new platform-data boolean property that enables use of a flash-based bad block table. This can also be enabled by setting the 'nand-on-flash-bbt' devicetree property. If the flash BBT is not enabled, the driver falls back to use OOB bad block markers only, as before. If the flash BBT is enabled the kernel will keep track of bad blocks using a BBT, in addition to the OOB markers. As explained by Brian Norris the reasons for using a BBT are: "" The primary reason would be that NAND datasheets specify it these days. A better argument is that nobody guarantees that you can write a bad block marker to a worn out block; you may just get program failures. This has been acknowledged by several developers over the last several years. Additionally, you get a boot-time performance improvement if you only have to read a few pages, instead of a page or two from every block on the flash. "" Signed-off-by: Ezequiel Garcia Acked-by: Roger Quadros Signed-off-by: Brian Norris --- include/linux/platform_data/mtd-nand-omap2.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 16ec262dfcc8..090bbab0130a 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -71,6 +71,7 @@ struct omap_nand_platform_data { struct mtd_partition *parts; int nr_parts; bool dev_ready; + bool flash_bbt; enum nand_io xfer_type; int devsize; enum omap_ecc ecc_opt; -- cgit From 57a94e24bc927f642f7f48ca1bf5476aa5be269d Mon Sep 17 00:00:00 2001 From: Boris BREZILLON Date: Mon, 22 Sep 2014 20:11:50 +0200 Subject: mtd: nand: support ONFI timing mode retrieval for non-ONFI NANDs Add an onfi_timing_mode_default field to nand_chip and nand_flash_dev in order to support NAND timings definition for non-ONFI NAND. NAND that support better timings mode than the default one have to define a new entry in the nand_ids table. The default timing mode should be deduced from timings description from the datasheet and the ONFI specification (www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf, chapter 4.15 "Timing Parameters"). You should choose the closest mode that fit the timings requirements of your NAND chip. Signed-off-by: Boris BREZILLON Signed-off-by: Brian Norris --- include/linux/mtd/nand.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 8acb307b6fde..e4d451e4600b 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -587,6 +587,11 @@ struct nand_buffers { * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, * also from the datasheet. It is the recommended ECC step * size, if known; if unknown, set to zero. + * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is + * either deduced from the datasheet if the NAND + * chip is not ONFI compliant or set to 0 if it is + * (an ONFI chip is always configured in mode 0 + * after a NAND reset) * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 @@ -671,6 +676,7 @@ struct nand_chip { uint8_t bits_per_cell; uint16_t ecc_strength_ds; uint16_t ecc_step_ds; + int onfi_timing_mode_default; int badblockpos; int badblockbits; @@ -773,6 +779,10 @@ struct nand_chip { * @ecc_step_ds in nand_chip{}, also from the datasheet. * For example, the "4bit ECC for each 512Byte" can be set with * NAND_ECC_INFO(4, 512). + * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND + * reset. Should be deduced from timings described + * in the datasheet. + * */ struct nand_flash_dev { char *name; @@ -793,6 +803,7 @@ struct nand_flash_dev { uint16_t strength_ds; uint16_t step_ds; } ecc; + int onfi_timing_mode_default; }; /** -- cgit From 93af53b8633c4cb474585158512182b21219d743 Mon Sep 17 00:00:00 2001 From: Ezequiel García Date: Sat, 20 Sep 2014 17:53:12 +0100 Subject: nand: omap2: Remove horrible ifdefs to fix module probe The current code abuses ifdefs to determine if the selected ECC scheme is supported by the running kernel. As a result the code is hard to read, and it also fails to load as a module. This commit removes all the ifdefs and instead introduces a function omap2_nand_ecc_check() to check if the ECC is supported by using IS_ENABLED(CONFIG_xxx). Since IS_ENABLED() is true when a config is =y or =m, this change fixes the module so it can be loaded with no issues. Acked-by: Roger Quadros Signed-off-by: Ezequiel Garcia Signed-off-by: Brian Norris --- include/linux/platform_data/elm.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include') diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h index 780d1e97f620..b8686c00f15f 100644 --- a/include/linux/platform_data/elm.h +++ b/include/linux/platform_data/elm.h @@ -42,8 +42,24 @@ struct elm_errorvec { int error_loc[16]; }; +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP_BCH) void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, struct elm_errorvec *err_vec); int elm_config(struct device *dev, enum bch_ecc bch_type, int ecc_steps, int ecc_step_size, int ecc_syndrome_size); +#else +static inline void +elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, + struct elm_errorvec *err_vec) +{ +} + +static inline int elm_config(struct device *dev, enum bch_ecc bch_type, + int ecc_steps, int ecc_step_size, + int ecc_syndrome_size) +{ + return -ENOSYS; +} +#endif /* CONFIG_MTD_NAND_ECC_BCH */ + #endif /* __ELM_H */ -- cgit