From 727dede0ba8afbd8d19116d39f2ae8d19d00033d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 24 Oct 2017 09:15:23 +0200 Subject: sound: Retire OSS Since no complaints have been raised after disabling the build of OSS (Open Sound System) by the commit 31cbee6a5611 ("sound: Disable the build of OSS drivers"), let's finally drop the whole code and documentation. Some glue codes are still left intact since sound/oss/dmasound stuff remains -- which is an independent implementation solely for m68k, and it's not covered by ALSA yet. Also, a couple of API header files (linux/sound.h and linux/soundcard.h) are kept remaining as well, since the OSS API itself is still supported by ALSA OSS emulation, and applications can refer to these. Where we're at it, some help texts in the top-level Kconfig are adjusted, too (who still needs to specify I/O port in kbuild nowadays?). Reviewed-by: Jaroslav Kysela Signed-off-by: Takashi Iwai --- sound/oss/pas2_card.c | 458 -------------------------------------------------- 1 file changed, 458 deletions(-) delete mode 100644 sound/oss/pas2_card.c (limited to 'sound/oss/pas2_card.c') diff --git a/sound/oss/pas2_card.c b/sound/oss/pas2_card.c deleted file mode 100644 index 769fca692d2a..000000000000 --- a/sound/oss/pas2_card.c +++ /dev/null @@ -1,458 +0,0 @@ -/* - * sound/oss/pas2_card.c - * - * Detection routine for the Pro Audio Spectrum cards. - */ - -#include -#include -#include -#include -#include "sound_config.h" - -#include "pas2.h" -#include "sb.h" - -static unsigned char dma_bits[] = { - 4, 1, 2, 3, 0, 5, 6, 7 -}; - -static unsigned char irq_bits[] = { - 0, 0, 1, 2, 3, 4, 5, 6, 0, 1, 7, 8, 9, 0, 10, 11 -}; - -static unsigned char sb_irq_bits[] = { - 0x00, 0x00, 0x08, 0x10, 0x00, 0x18, 0x00, 0x20, - 0x00, 0x08, 0x28, 0x30, 0x38, 0, 0 -}; - -static unsigned char sb_dma_bits[] = { - 0x00, 0x40, 0x80, 0xC0, 0, 0, 0, 0 -}; - -/* - * The Address Translation code is used to convert I/O register addresses to - * be relative to the given base -register - */ - -int pas_translate_code = 0; -static int pas_intr_mask; -static int pas_irq; -static int pas_sb_base; -DEFINE_SPINLOCK(pas_lock); -#ifndef CONFIG_PAS_JOYSTICK -static bool joystick; -#else -static bool joystick = 1; -#endif -#ifdef SYMPHONY_PAS -static bool symphony = 1; -#else -static bool symphony; -#endif -#ifdef BROKEN_BUS_CLOCK -static bool broken_bus_clock = 1; -#else -static bool broken_bus_clock; -#endif - -static struct address_info cfg; -static struct address_info cfg2; - -char pas_model = 0; -static char *pas_model_names[] = { - "", - "Pro AudioSpectrum+", - "CDPC", - "Pro AudioSpectrum 16", - "Pro AudioSpectrum 16D" -}; - -/* - * pas_read() and pas_write() are equivalents of inb and outb - * These routines perform the I/O address translation required - * to support other than the default base address - */ - -unsigned char pas_read(int ioaddr) -{ - return inb(ioaddr + pas_translate_code); -} - -void pas_write(unsigned char data, int ioaddr) -{ - outb((data), ioaddr + pas_translate_code); -} - -/******************* Begin of the Interrupt Handler ********************/ - -static irqreturn_t pasintr(int irq, void *dev_id) -{ - int status; - - status = pas_read(0x0B89); - pas_write(status, 0x0B89); /* Clear interrupt */ - - if (status & 0x08) - { - pas_pcm_interrupt(status, 1); - status &= ~0x08; - } - if (status & 0x10) - { - pas_midi_interrupt(); - status &= ~0x10; - } - return IRQ_HANDLED; -} - -int pas_set_intr(int mask) -{ - if (!mask) - return 0; - - pas_intr_mask |= mask; - - pas_write(pas_intr_mask, 0x0B8B); - return 0; -} - -int pas_remove_intr(int mask) -{ - if (!mask) - return 0; - - pas_intr_mask &= ~mask; - pas_write(pas_intr_mask, 0x0B8B); - - return 0; -} - -/******************* End of the Interrupt handler **********************/ - -/******************* Begin of the Initialization Code ******************/ - -static int __init config_pas_hw(struct address_info *hw_config) -{ - char ok = 1; - unsigned int_ptrs; /* scsi/sound interrupt pointers */ - - pas_irq = hw_config->irq; - - pas_write(0x00, 0x0B8B); - pas_write(0x36, 0x138B); - pas_write(0x36, 0x1388); - pas_write(0, 0x1388); - pas_write(0x74, 0x138B); - pas_write(0x74, 0x1389); - pas_write(0, 0x1389); - - pas_write(0x80 | 0x40 | 0x20 | 1, 0x0B8A); - pas_write(0x80 | 0x20 | 0x10 | 0x08 | 0x01, 0xF8A); - pas_write(0x01 | 0x02 | 0x04 | 0x10 /* - * | - * 0x80 - */ , 0xB88); - - pas_write(0x80 | (joystick ? 0x40 : 0), 0xF388); - - if (pas_irq < 0 || pas_irq > 15) - { - printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq); - hw_config->irq=-1; - ok = 0; - } - else - { - int_ptrs = pas_read(0xF38A); - int_ptrs = (int_ptrs & 0xf0) | irq_bits[pas_irq]; - pas_write(int_ptrs, 0xF38A); - if (!irq_bits[pas_irq]) - { - printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq); - hw_config->irq=-1; - ok = 0; - } - else - { - if (request_irq(pas_irq, pasintr, 0, "PAS16",hw_config) < 0) { - printk(KERN_ERR "PAS16: Cannot allocate IRQ %d\n",pas_irq); - hw_config->irq=-1; - ok = 0; - } - } - } - - if (hw_config->dma < 0 || hw_config->dma > 7) - { - printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma); - hw_config->dma=-1; - ok = 0; - } - else - { - pas_write(dma_bits[hw_config->dma], 0xF389); - if (!dma_bits[hw_config->dma]) - { - printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma); - hw_config->dma=-1; - ok = 0; - } - else - { - if (sound_alloc_dma(hw_config->dma, "PAS16")) - { - printk(KERN_ERR "pas2_card.c: Can't allocate DMA channel\n"); - hw_config->dma=-1; - ok = 0; - } - } - } - - /* - * This fixes the timing problems of the PAS due to the Symphony chipset - * as per Media Vision. Only define this if your PAS doesn't work correctly. - */ - - if(symphony) - { - outb((0x05), 0xa8); - outb((0x60), 0xa9); - } - - if(broken_bus_clock) - pas_write(0x01 | 0x10 | 0x20 | 0x04, 0x8388); - else - /* - * pas_write(0x01, 0x8388); - */ - pas_write(0x01 | 0x10 | 0x20, 0x8388); - - pas_write(0x18, 0x838A); /* ??? */ - pas_write(0x20 | 0x01, 0x0B8A); /* Mute off, filter = 17.897 kHz */ - pas_write(8, 0xBF8A); - - mix_write(0x80 | 5, 0x078B); - mix_write(5, 0x078B); - - { - struct address_info *sb_config; - - sb_config = &cfg2; - if (sb_config->io_base) - { - unsigned char irq_dma; - - /* - * Turn on Sound Blaster compatibility - * bit 1 = SB emulation - * bit 0 = MPU401 emulation (CDPC only :-( ) - */ - - pas_write(0x02, 0xF788); - - /* - * "Emulation address" - */ - - pas_write((sb_config->io_base >> 4) & 0x0f, 0xF789); - pas_sb_base = sb_config->io_base; - - if (!sb_dma_bits[sb_config->dma]) - printk(KERN_ERR "PAS16 Warning: Invalid SB DMA %d\n\n", sb_config->dma); - - if (!sb_irq_bits[sb_config->irq]) - printk(KERN_ERR "PAS16 Warning: Invalid SB IRQ %d\n\n", sb_config->irq); - - irq_dma = sb_dma_bits[sb_config->dma] | - sb_irq_bits[sb_config->irq]; - - pas_write(irq_dma, 0xFB8A); - } - else - pas_write(0x00, 0xF788); - } - - if (!ok) - printk(KERN_WARNING "PAS16: Driver not enabled\n"); - - return ok; -} - -static int __init detect_pas_hw(struct address_info *hw_config) -{ - unsigned char board_id, foo; - - /* - * WARNING: Setting an option like W:1 or so that disables warm boot reset - * of the card will screw up this detect code something fierce. Adding code - * to handle this means possibly interfering with other cards on the bus if - * you have something on base port 0x388. SO be forewarned. - */ - - outb((0xBC), 0x9A01); /* Activate first board */ - outb((hw_config->io_base >> 2), 0x9A01); /* Set base address */ - pas_translate_code = hw_config->io_base - 0x388; - pas_write(1, 0xBF88); /* Select one wait states */ - - board_id = pas_read(0x0B8B); - - if (board_id == 0xff) - return 0; - - /* - * We probably have a PAS-series board, now check for a PAS16-series board - * by trying to change the board revision bits. PAS16-series hardware won't - * let you do this - the bits are read-only. - */ - - foo = board_id ^ 0xe0; - - pas_write(foo, 0x0B8B); - foo = pas_read(0x0B8B); - pas_write(board_id, 0x0B8B); - - if (board_id != foo) - return 0; - - pas_model = pas_read(0xFF88); - - return pas_model; -} - -static void __init attach_pas_card(struct address_info *hw_config) -{ - pas_irq = hw_config->irq; - - if (detect_pas_hw(hw_config)) - { - - if ((pas_model = pas_read(0xFF88))) - { - char temp[100]; - - if (pas_model < 0 || - pas_model >= ARRAY_SIZE(pas_model_names)) { - printk(KERN_ERR "pas2 unrecognized model.\n"); - return; - } - sprintf(temp, - "%s rev %d", pas_model_names[(int) pas_model], - pas_read(0x2789)); - conf_printf(temp, hw_config); - } - if (config_pas_hw(hw_config)) - { - pas_pcm_init(hw_config); - pas_midi_init(); - pas_init_mixer(); - } - } -} - -static inline int __init probe_pas(struct address_info *hw_config) -{ - return detect_pas_hw(hw_config); -} - -static void __exit unload_pas(struct address_info *hw_config) -{ - extern int pas_audiodev; - extern int pas2_mididev; - - if (hw_config->dma>0) - sound_free_dma(hw_config->dma); - if (hw_config->irq>0) - free_irq(hw_config->irq, hw_config); - - if(pas_audiodev!=-1) - sound_unload_mixerdev(audio_devs[pas_audiodev]->mixer_dev); - if(pas2_mididev!=-1) - sound_unload_mididev(pas2_mididev); - if(pas_audiodev!=-1) - sound_unload_audiodev(pas_audiodev); -} - -static int __initdata io = -1; -static int __initdata irq = -1; -static int __initdata dma = -1; -static int __initdata dma16 = -1; /* Set this for modules that need it */ - -static int __initdata sb_io = 0; -static int __initdata sb_irq = -1; -static int __initdata sb_dma = -1; -static int __initdata sb_dma16 = -1; - -module_param_hw(io, int, ioport, 0); -module_param_hw(irq, int, irq, 0); -module_param_hw(dma, int, dma, 0); -module_param_hw(dma16, int, dma, 0); - -module_param_hw(sb_io, int, ioport, 0); -module_param_hw(sb_irq, int, irq, 0); -module_param_hw(sb_dma, int, dma, 0); -module_param_hw(sb_dma16, int, dma, 0); - -module_param(joystick, bool, 0); -module_param(symphony, bool, 0); -module_param(broken_bus_clock, bool, 0); - -MODULE_LICENSE("GPL"); - -static int __init init_pas2(void) -{ - printk(KERN_INFO "Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996\n"); - - cfg.io_base = io; - cfg.irq = irq; - cfg.dma = dma; - cfg.dma2 = dma16; - - cfg2.io_base = sb_io; - cfg2.irq = sb_irq; - cfg2.dma = sb_dma; - cfg2.dma2 = sb_dma16; - - if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) { - printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n"); - return -EINVAL; - } - - if (!probe_pas(&cfg)) - return -ENODEV; - attach_pas_card(&cfg); - - return 0; -} - -static void __exit cleanup_pas2(void) -{ - unload_pas(&cfg); -} - -module_init(init_pas2); -module_exit(cleanup_pas2); - -#ifndef MODULE -static int __init setup_pas2(char *str) -{ - /* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, sb_dma2 */ - int ints[9]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - dma = ints[3]; - dma16 = ints[4]; - - sb_io = ints[5]; - sb_irq = ints[6]; - sb_dma = ints[7]; - sb_dma16 = ints[8]; - - return 1; -} - -__setup("pas2=", setup_pas2); -#endif -- cgit