From ef24ba7091517d2bbf9ba2cb4256c0dccd51d248 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 6 Sep 2016 21:53:24 +1000 Subject: powerpc: Remove all usages of NO_IRQ NO_IRQ has been == 0 on powerpc for just over ten years (since commit 0ebfff1491ef ("[POWERPC] Add new interrupt mapping core and change platforms to use it")). It's also 0 on most other arches. Although it's fairly harmless, every now and then it causes confusion when a driver is built on powerpc and another arch which doesn't define NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least some of which are to work around that problem. So we'd like to remove it. This is fairly trivial in the arch code, we just convert: if (irq == NO_IRQ) to if (!irq) if (irq != NO_IRQ) to if (irq) irq = NO_IRQ; to irq = 0; return NO_IRQ; to return 0; And a few other odd cases as well. At least for now we keep the #define NO_IRQ, because there is driver code that uses NO_IRQ and the fixes to remove those will go via other trees. Note we also change some occurrences in PPC sound drivers, drivers/ps3, and drivers/macintosh. Signed-off-by: Michael Ellerman --- sound/ppc/tumbler.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'sound/ppc') diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c index c8fafba218a5..58ee8089bbf9 100644 --- a/sound/ppc/tumbler.c +++ b/sound/ppc/tumbler.c @@ -1303,19 +1303,19 @@ static int tumbler_init(struct snd_pmac *chip) &mix->line_mute, 1); irq = tumbler_find_device("headphone-detect", NULL, &mix->hp_detect, 0); - if (irq <= NO_IRQ) + if (irq <= 0) irq = tumbler_find_device("headphone-detect", NULL, &mix->hp_detect, 1); - if (irq <= NO_IRQ) + if (irq <= 0) irq = tumbler_find_device("keywest-gpio15", NULL, &mix->hp_detect, 1); mix->headphone_irq = irq; irq = tumbler_find_device("line-output-detect", NULL, &mix->line_detect, 0); - if (irq <= NO_IRQ) + if (irq <= 0) irq = tumbler_find_device("line-output-detect", NULL, &mix->line_detect, 1); - if (IS_G4DA && irq <= NO_IRQ) + if (IS_G4DA && irq <= 0) irq = tumbler_find_device("keywest-gpio16", NULL, &mix->line_detect, 1); mix->lineout_irq = irq; -- cgit