From 35040410372ca27a33cec8382d42c90b6b6c99f6 Mon Sep 17 00:00:00 2001 From: ChiYuan Huang Date: Fri, 29 Dec 2023 09:46:01 +0800 Subject: ASoC: codecs: rtq9128: Fix PM_RUNTIME usage If 'pm_runtime_resume_and_get' is used, must check the return value to prevent the active count not matched problem. Signed-off-by: ChiYuan Huang Link: https://msgid.link/r/bebd9e2bed9e0528a7fd9c528d785da02caf4f1a.1703813842.git.cy_huang@richtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rtq9128.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'sound/soc/codecs') diff --git a/sound/soc/codecs/rtq9128.c b/sound/soc/codecs/rtq9128.c index c22b047115cc..bda64f9eeb62 100644 --- a/sound/soc/codecs/rtq9128.c +++ b/sound/soc/codecs/rtq9128.c @@ -391,7 +391,11 @@ static int rtq9128_component_probe(struct snd_soc_component *comp) unsigned int val; int i, ret; - pm_runtime_resume_and_get(comp->dev); + ret = pm_runtime_resume_and_get(comp->dev); + if (ret < 0) { + dev_err(comp->dev, "Failed to resume device (%d)\n", ret); + return ret; + } val = snd_soc_component_read(comp, RTQ9128_REG_EFUSE_DATA); -- cgit From 415d10ccef712f3ec73cd880c1fef3eb48601c3a Mon Sep 17 00:00:00 2001 From: ChiYuan Huang Date: Fri, 29 Dec 2023 09:46:02 +0800 Subject: ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow To enable TDM mode, the current control flow limits the function calling order should be 'set_tdm_slot->set_dai_fmt'. But not all platform sound card like as simeple card to follow this design. To bypass this limit, adjust the DAI format setting in runtime 'hw_param' callback. Signed-off-by: ChiYuan Huang Link: https://msgid.link/r/c4c8df00d8d179b8b5b39a8521de3a85325c57e8.1703813842.git.cy_huang@richtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rtq9128.c | 67 +++++++++++++++++++++++++--------------------- 1 file changed, 36 insertions(+), 31 deletions(-) (limited to 'sound/soc/codecs') diff --git a/sound/soc/codecs/rtq9128.c b/sound/soc/codecs/rtq9128.c index bda64f9eeb62..aa3eadecd974 100644 --- a/sound/soc/codecs/rtq9128.c +++ b/sound/soc/codecs/rtq9128.c @@ -59,6 +59,7 @@ struct rtq9128_data { struct gpio_desc *enable; + unsigned int daifmt; int tdm_slots; int tdm_slot_width; bool tdm_input_data2_select; @@ -441,10 +442,7 @@ static const struct snd_soc_component_driver rtq9128_comp_driver = { static int rtq9128_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) { struct rtq9128_data *data = snd_soc_dai_get_drvdata(dai); - struct snd_soc_component *comp = dai->component; struct device *dev = dai->dev; - unsigned int audfmt, fmtval; - int ret; dev_dbg(dev, "%s: fmt 0x%8x\n", __func__, fmt); @@ -454,35 +452,10 @@ static int rtq9128_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return -EINVAL; } - fmtval = fmt & SND_SOC_DAIFMT_FORMAT_MASK; - if (data->tdm_slots && fmtval != SND_SOC_DAIFMT_DSP_A && fmtval != SND_SOC_DAIFMT_DSP_B) { - dev_err(dev, "TDM is used, format only support DSP_A or DSP_B\n"); - return -EINVAL; - } + /* Store here and will be used in runtime hw_params for DAI format setting */ + data->daifmt = fmt; - switch (fmtval) { - case SND_SOC_DAIFMT_I2S: - audfmt = 8; - break; - case SND_SOC_DAIFMT_LEFT_J: - audfmt = 9; - break; - case SND_SOC_DAIFMT_RIGHT_J: - audfmt = 10; - break; - case SND_SOC_DAIFMT_DSP_A: - audfmt = data->tdm_slots ? 12 : 11; - break; - case SND_SOC_DAIFMT_DSP_B: - audfmt = data->tdm_slots ? 4 : 3; - break; - default: - dev_err(dev, "Unsupported format 0x%8x\n", fmt); - return -EINVAL; - } - - ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDFMT_MASK, audfmt); - return ret < 0 ? ret : 0; + return 0; } static int rtq9128_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, @@ -558,10 +531,38 @@ static int rtq9128_dai_hw_params(struct snd_pcm_substream *stream, struct snd_pc unsigned int width, slot_width, bitrate, audbit, dolen; struct snd_soc_component *comp = dai->component; struct device *dev = dai->dev; + unsigned int fmtval, audfmt; int ret; dev_dbg(dev, "%s: width %d\n", __func__, params_width(param)); + fmtval = FIELD_GET(SND_SOC_DAIFMT_FORMAT_MASK, data->daifmt); + if (data->tdm_slots && fmtval != SND_SOC_DAIFMT_DSP_A && fmtval != SND_SOC_DAIFMT_DSP_B) { + dev_err(dev, "TDM is used, format only support DSP_A or DSP_B\n"); + return -EINVAL; + } + + switch (fmtval) { + case SND_SOC_DAIFMT_I2S: + audfmt = 8; + break; + case SND_SOC_DAIFMT_LEFT_J: + audfmt = 9; + break; + case SND_SOC_DAIFMT_RIGHT_J: + audfmt = 10; + break; + case SND_SOC_DAIFMT_DSP_A: + audfmt = data->tdm_slots ? 12 : 11; + break; + case SND_SOC_DAIFMT_DSP_B: + audfmt = data->tdm_slots ? 4 : 3; + break; + default: + dev_err(dev, "Unsupported format 0x%8x\n", fmtval); + return -EINVAL; + } + switch (width = params_width(param)) { case 16: audbit = 0; @@ -615,6 +616,10 @@ static int rtq9128_dai_hw_params(struct snd_pcm_substream *stream, struct snd_pc return -EINVAL; } + ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDFMT_MASK, audfmt); + if (ret < 0) + return ret; + ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDBIT_MASK, audbit); if (ret < 0) return ret; -- cgit