From a93455e1c301ce2a4cae11682359fd2067a8fd30 Mon Sep 17 00:00:00 2001 From: Thomas Pugliese Date: Tue, 26 Nov 2013 13:58:15 -0600 Subject: ALSA: usb: use multiple packets per urb for Wireless USB inbound audio For Wireless USB audio devices, use multiple isoc packets per URB for inbound endpoints with a datainterval < 5. This allows the WUSB host controller to take advantage of bursting to service endpoints whose logical polling interval is less than the 4ms minimum polling interval limit in WUSB. Signed-off-by: Thomas Pugliese Signed-off-by: Takashi Iwai --- sound/usb/endpoint.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'sound/usb/endpoint.c') diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c index b9ba0fcc45df..83aabea259d7 100644 --- a/sound/usb/endpoint.c +++ b/sound/usb/endpoint.c @@ -636,8 +636,22 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep, if (usb_pipein(ep->pipe) || snd_usb_endpoint_implicit_feedback_sink(ep)) { + urb_packs = packs_per_ms; + /* + * Wireless devices can poll at a max rate of once per 4ms. + * For dataintervals less than 5, increase the packet count to + * allow the host controller to use bursting to fill in the + * gaps. + */ + if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_WIRELESS) { + int interval = ep->datainterval; + while (interval < 5) { + urb_packs <<= 1; + ++interval; + } + } /* make capture URBs <= 1 ms and smaller than a period */ - urb_packs = min(max_packs_per_urb, packs_per_ms); + urb_packs = min(max_packs_per_urb, urb_packs); while (urb_packs > 1 && urb_packs * maxsize >= period_bytes) urb_packs >>= 1; ep->nurbs = MAX_URBS; -- cgit