From 6dad45f4d28977bd1948973107cf325d431e5b7e Mon Sep 17 00:00:00 2001 From: Gergo Koteles Date: Fri, 22 Dec 2023 00:48:56 +0100 Subject: ALSA: hda/tas2781: do not use regcache There are two problems with using regcache in this module. The amplifier has 3 addressing levels (BOOK, PAGE, REG). The firmware contains blocks that must be written to BOOK 0x8C. The regcache doesn't know anything about BOOK, so regcache_sync writes invalid values to the actual BOOK. The module handles 2 or more separate amplifiers. The amplifiers have different register values, and the module uses only one regmap/regcache for all the amplifiers. The regcache_sync only writes the last amplifier used. The module successfully restores all the written register values (RC profile, program, configuration, calibration) without regcache. Remove regcache functions and set regmap cache_type to REGCACHE_NONE. Link: https://lore.kernel.org/r/21a183b5a08cb23b193af78d4b1114cc59419272.1701906455.git.soyer@irl.hu/ Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Acked-by: Mark Brown CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles Link: https://lore.kernel.org/r/491aeed0e2eecc3b704ec856f815db21bad3ba0e.1703202126.git.soyer@irl.hu Signed-off-by: Takashi Iwai --- sound/pci/hda/tas2781_hda_i2c.c | 17 +---------------- sound/soc/codecs/tas2781-comlib.c | 2 +- 2 files changed, 2 insertions(+), 17 deletions(-) (limited to 'sound') diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c index 2fb1a7037c82..e4c54b2a012c 100644 --- a/sound/pci/hda/tas2781_hda_i2c.c +++ b/sound/pci/hda/tas2781_hda_i2c.c @@ -717,8 +717,6 @@ static int tas2781_runtime_suspend(struct device *dev) tas_priv->tasdevice[i].cur_conf = -1; } - regcache_cache_only(tas_priv->regmap, true); - regcache_mark_dirty(tas_priv->regmap); mutex_unlock(&tas_priv->codec_lock); @@ -730,20 +728,11 @@ static int tas2781_runtime_resume(struct device *dev) struct tasdevice_priv *tas_priv = dev_get_drvdata(dev); unsigned long calib_data_sz = tas_priv->ndev * TASDEVICE_SPEAKER_CALIBRATION_SIZE; - int ret; dev_dbg(tas_priv->dev, "Runtime Resume\n"); mutex_lock(&tas_priv->codec_lock); - regcache_cache_only(tas_priv->regmap, false); - ret = regcache_sync(tas_priv->regmap); - if (ret) { - dev_err(tas_priv->dev, - "Failed to restore register cache: %d\n", ret); - goto out; - } - tasdevice_prmg_load(tas_priv, tas_priv->cur_prog); /* If calibrated data occurs error, dsp will still works with default @@ -752,10 +741,9 @@ static int tas2781_runtime_resume(struct device *dev) if (tas_priv->cali_data.total_sz > calib_data_sz) tas2781_apply_calib(tas_priv); -out: mutex_unlock(&tas_priv->codec_lock); - return ret; + return 0; } static int tas2781_system_suspend(struct device *dev) @@ -770,10 +758,7 @@ static int tas2781_system_suspend(struct device *dev) return ret; /* Shutdown chip before system suspend */ - regcache_cache_only(tas_priv->regmap, false); tasdevice_tuning_switch(tas_priv, 1); - regcache_cache_only(tas_priv->regmap, true); - regcache_mark_dirty(tas_priv->regmap); /* * Reset GPIO may be shared, so cannot reset here. diff --git a/sound/soc/codecs/tas2781-comlib.c b/sound/soc/codecs/tas2781-comlib.c index ffb26e4a7e2f..933cd008e9f5 100644 --- a/sound/soc/codecs/tas2781-comlib.c +++ b/sound/soc/codecs/tas2781-comlib.c @@ -39,7 +39,7 @@ static const struct regmap_range_cfg tasdevice_ranges[] = { static const struct regmap_config tasdevice_regmap = { .reg_bits = 8, .val_bits = 8, - .cache_type = REGCACHE_RBTREE, + .cache_type = REGCACHE_NONE, .ranges = tasdevice_ranges, .num_ranges = ARRAY_SIZE(tasdevice_ranges), .max_register = 256 * 128, -- cgit