From ae44705f98ca0ecb117765c9c03950de2b0686dc Mon Sep 17 00:00:00 2001 From: Takashi Sakamoto Date: Wed, 23 Jun 2021 16:59:41 +0900 Subject: ALSA: firewire-motu: fix register handling for 896 After further investigation, I find out some mistakes for 896 about its register. This commit fixes it. Fixes: b431f16f1685 ("ALSA: firewire-motu: add support for MOTU 896") Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20210623075941.72562-10-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai --- sound/firewire/motu/motu-protocol-v1.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) (limited to 'sound') diff --git a/sound/firewire/motu/motu-protocol-v1.c b/sound/firewire/motu/motu-protocol-v1.c index 3b766615a9ee..f1d6a326dc07 100644 --- a/sound/firewire/motu/motu-protocol-v1.c +++ b/sound/firewire/motu/motu-protocol-v1.c @@ -61,13 +61,21 @@ // Status register for MOTU 896 (0x'ffff'f000'0b14). // -// 0x20000000: fetch PCM frames from communication IC to DAC. +// 0xf0000000: enable physical and stream input to DAC. +// 0x80000000: disable +// 0x40000000: disable +// 0x20000000: enable (prior to the other bits) +// 0x10000000: disable +// 0x00000000: disable // 0x08000000: speed of word clock signal output on BNC interface. -// 0x00000000: follow to system clock. -// 0x08000000: half of system clock. -// 0x01000000: Route main output to headphone output. -// 0x00ffff00: input to monitor. -// 0x00000000: none +// 0x00000000: force to low rate (44.1/48.0 kHz). +// 0x08000000: follow to system clock. +// 0x04000000: something relevant to clock. +// 0x03000000: enable output. +// 0x02000000: enabled irreversibly once standing unless the device voluntarily disables it. +// 0x01000000: enabled irreversibly once standing unless the device voluntarily disables it. +// 0x00ffff00: monitor input mode. +// 0x00000000: disabled // 0x00004800: analog-1/2 // 0x00005a00: analog-3/4 // 0x00006c00: analog-5/6 @@ -83,7 +91,7 @@ // 0x00007f00: analog-8 // 0x00104000: AES/EBU-1 // 0x00104900: AES/EBU-2 -// 0x00000060: sample rate conversin for AES/EBU input/output. +// 0x00000060: sample rate conversion for AES/EBU input/output. // 0x00000000: None // 0x00000020: input signal is converted to system rate // 0x00000040: output is slave to input, ignoring system rate @@ -97,16 +105,18 @@ // 0x00000000: internal // 0x00000001: ADAT on optical interface // 0x00000002: AES/EBU on XLR +// 0x00000003: source packet header (SPH) // 0x00000004: word clock on BNC // 0x00000005: ADAT on Dsub 9pin #define CLK_896_STATUS_OFFSET 0x0b14 #define CLK_896_STATUS_FLAG_FETCH_ENABLE 0x20000000 -#define CLK_896_STATUS_FLAG_MAIN_TO_HP 0x01000000 +#define CLK_896_STATUS_FLAG_OUTPUT_ON 0x03000000 #define CLK_896_STATUS_MASK_SRC 0x00000007 #define CLK_896_STATUS_FLAG_SRC_INTERNAL 0x00000000 #define CLK_896_STATUS_FLAG_SRC_ADAT_ON_OPT 0x00000001 #define CLK_896_STATUS_FLAG_SRC_AESEBU 0x00000002 +#define CLK_896_STATUS_FLAG_SRC_SPH 0x00000003 #define CLK_896_STATUS_FLAG_SRC_WORD 0x00000004 #define CLK_896_STATUS_FLAG_SRC_ADAT_ON_DSUB 0x00000005 #define CLK_896_STATUS_MASK_RATE 0x00000018 @@ -304,6 +314,9 @@ static int get_clock_source_896(struct snd_motu *motu, enum snd_motu_clock_sourc case CLK_896_STATUS_FLAG_SRC_AESEBU: *src = SND_MOTU_CLOCK_SOURCE_AESEBU_ON_XLR; break; + case CLK_896_STATUS_FLAG_SRC_SPH: + *src = SND_MOTU_CLOCK_SOURCE_SPH; + break; case CLK_896_STATUS_FLAG_SRC_WORD: *src = SND_MOTU_CLOCK_SOURCE_WORD_ON_BNC; break; @@ -362,9 +375,9 @@ static int switch_fetching_mode_896(struct snd_motu *motu, bool enable) return err; data = be32_to_cpu(reg); - data &= ~(CLK_896_STATUS_FLAG_FETCH_ENABLE | CLK_896_STATUS_FLAG_MAIN_TO_HP); + data &= ~CLK_896_STATUS_FLAG_FETCH_ENABLE; if (enable) - data |= (CLK_896_STATUS_FLAG_FETCH_ENABLE | CLK_896_STATUS_FLAG_MAIN_TO_HP); + data |= CLK_896_STATUS_FLAG_FETCH_ENABLE | CLK_896_STATUS_FLAG_OUTPUT_ON; reg = cpu_to_be32(data); return snd_motu_transaction_write(motu, CLK_896_STATUS_OFFSET, ®, sizeof(reg)); -- cgit