From c61115b37ff964d63191dbf4a058f481daabdf57 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 22 Mar 2024 13:25:04 +0200 Subject: ASoC: SOF: Intel: hda-dsp: Skip IMR boot on ACE platforms in case of S3 suspend SoCs with ACE architecture are tailored to use s2idle instead deep (S3) suspend state and the IMR content is lost when the system is forced to enter even to S3. When waking up from S3 state the IMR boot will fail as the content is lost. Set the skip_imr_boot flag to make sure that we don't try IMR in this case. Signed-off-by: Peter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Liam Girdwood Reviewed-by: Ranjani Sridharan Link: https://msgid.link/r/20240322112504.4192-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/intel/hda-dsp.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'sound') diff --git a/sound/soc/sof/intel/hda-dsp.c b/sound/soc/sof/intel/hda-dsp.c index 31ffa1a8f2ac..ef5c915db8ff 100644 --- a/sound/soc/sof/intel/hda-dsp.c +++ b/sound/soc/sof/intel/hda-dsp.c @@ -681,17 +681,27 @@ static int hda_suspend(struct snd_sof_dev *sdev, bool runtime_suspend) struct sof_intel_hda_dev *hda = sdev->pdata->hw_pdata; const struct sof_intel_dsp_desc *chip = hda->desc; struct hdac_bus *bus = sof_to_bus(sdev); + bool imr_lost = false; int ret, j; /* - * The memory used for IMR boot loses its content in deeper than S3 state - * We must not try IMR boot on next power up (as it will fail). - * + * The memory used for IMR boot loses its content in deeper than S3 + * state on CAVS platforms. + * On ACE platforms due to the system architecture the IMR content is + * lost at S3 state already, they are tailored for s2idle use. + * We must not try IMR boot on next power up in these cases as it will + * fail. + */ + if (sdev->system_suspend_target > SOF_SUSPEND_S3 || + (chip->hw_ip_version >= SOF_INTEL_ACE_1_0 && + sdev->system_suspend_target == SOF_SUSPEND_S3)) + imr_lost = true; + + /* * In case of firmware crash or boot failure set the skip_imr_boot to true * as well in order to try to re-load the firmware to do a 'cold' boot. */ - if (sdev->system_suspend_target > SOF_SUSPEND_S3 || - sdev->fw_state == SOF_FW_CRASHED || + if (imr_lost || sdev->fw_state == SOF_FW_CRASHED || sdev->fw_state == SOF_FW_BOOT_FAILED) hda->skip_imr_boot = true; -- cgit