From daefd0bc0bd28cea2e6b2f3e1a9da005cd4f58fc Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Fri, 26 May 2017 12:05:38 -0700 Subject: perf stat: Add support to measure SMI cost Implementing a new --smi-cost mode in perf stat to measure SMI cost. During the measurement, the /sys/device/cpu/freeze_on_smi will be set. The measurement can be done with one counter (unhalted core cycles), and two free running MSR counters (IA32_APERF and SMI_COUNT). In practice, the percentages of SMI core cycles should be more useful than absolute value. So the output will be the percentage of SMI core cycles and SMI#. metric_only will be set by default. SMI cycles% = (aperf - unhalted core cycles) / aperf Here is an example output. Performance counter stats for 'sudo echo ': SMI cycles% SMI# 0.1% 1 0.010858678 seconds time elapsed Users who wants to get the actual value can apply additional --no-metric-only. Signed-off-by: Kan Liang Acked-by: Jiri Olsa Cc: Andi Kleen Cc: Kan Liang Cc: Peter Zijlstra Cc: Robert Elliott Cc: Stephane Eranian Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1495825538-5230-3-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/stat-shadow.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'tools/perf/util/stat-shadow.c') diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c index ac10cc675d39..719d6cb86952 100644 --- a/tools/perf/util/stat-shadow.c +++ b/tools/perf/util/stat-shadow.c @@ -44,6 +44,8 @@ static struct stats runtime_topdown_slots_issued[NUM_CTX][MAX_NR_CPUS]; static struct stats runtime_topdown_slots_retired[NUM_CTX][MAX_NR_CPUS]; static struct stats runtime_topdown_fetch_bubbles[NUM_CTX][MAX_NR_CPUS]; static struct stats runtime_topdown_recovery_bubbles[NUM_CTX][MAX_NR_CPUS]; +static struct stats runtime_smi_num_stats[NUM_CTX][MAX_NR_CPUS]; +static struct stats runtime_aperf_stats[NUM_CTX][MAX_NR_CPUS]; static struct rblist runtime_saved_values; static bool have_frontend_stalled; @@ -157,6 +159,8 @@ void perf_stat__reset_shadow_stats(void) memset(runtime_topdown_slots_issued, 0, sizeof(runtime_topdown_slots_issued)); memset(runtime_topdown_fetch_bubbles, 0, sizeof(runtime_topdown_fetch_bubbles)); memset(runtime_topdown_recovery_bubbles, 0, sizeof(runtime_topdown_recovery_bubbles)); + memset(runtime_smi_num_stats, 0, sizeof(runtime_smi_num_stats)); + memset(runtime_aperf_stats, 0, sizeof(runtime_aperf_stats)); next = rb_first(&runtime_saved_values.entries); while (next) { @@ -217,6 +221,10 @@ void perf_stat__update_shadow_stats(struct perf_evsel *counter, u64 *count, update_stats(&runtime_dtlb_cache_stats[ctx][cpu], count[0]); else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_ITLB)) update_stats(&runtime_itlb_cache_stats[ctx][cpu], count[0]); + else if (perf_stat_evsel__is(counter, SMI_NUM)) + update_stats(&runtime_smi_num_stats[ctx][cpu], count[0]); + else if (perf_stat_evsel__is(counter, APERF)) + update_stats(&runtime_aperf_stats[ctx][cpu], count[0]); if (counter->collect_stat) { struct saved_value *v = saved_value_lookup(counter, cpu, ctx, @@ -592,6 +600,29 @@ static double td_be_bound(int ctx, int cpu) return sanitize_val(1.0 - sum); } +static void print_smi_cost(int cpu, struct perf_evsel *evsel, + struct perf_stat_output_ctx *out) +{ + double smi_num, aperf, cycles, cost = 0.0; + int ctx = evsel_context(evsel); + const char *color = NULL; + + smi_num = avg_stats(&runtime_smi_num_stats[ctx][cpu]); + aperf = avg_stats(&runtime_aperf_stats[ctx][cpu]); + cycles = avg_stats(&runtime_cycles_stats[ctx][cpu]); + + if ((cycles == 0) || (aperf == 0)) + return; + + if (smi_num) + cost = (aperf - cycles) / aperf * 100.00; + + if (cost > 10) + color = PERF_COLOR_RED; + out->print_metric(out->ctx, color, "%8.1f%%", "SMI cycles%", cost); + out->print_metric(out->ctx, NULL, "%4.0f", "SMI#", smi_num); +} + void perf_stat__print_shadow_stats(struct perf_evsel *evsel, double avg, int cpu, struct perf_stat_output_ctx *out) @@ -825,6 +856,8 @@ void perf_stat__print_shadow_stats(struct perf_evsel *evsel, } snprintf(unit_buf, sizeof(unit_buf), "%c/sec", unit); print_metric(ctxp, NULL, "%8.3f", unit_buf, ratio); + } else if (perf_stat_evsel__is(evsel, SMI_NUM)) { + print_smi_cost(cpu, evsel, out); } else { print_metric(ctxp, NULL, NULL, NULL, 0); } -- cgit From 5e97665f91d343b5bcf1f92249e45e18987ffd00 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 24 Jul 2017 16:40:03 -0700 Subject: perf stat: Fix saved values rbtree lookup The stat shadow saved values rbtree is indexed by a pointer. Fix the comparison function: - We cannot return a pointer delta as an int because that loses bits on 64bit. - Doing pointer arithmetic on the struct pointer only works if the objects are spaced by the multiple of the object size, which is not guaranteed for individual malloc'ed object Replace it with a proper comparison. This fixes various problems with values not being found. Signed-off-by: Andi Kleen Acked-by: Jiri Olsa Link: http://lkml.kernel.org/r/20170724234015.5165-4-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/stat-shadow.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'tools/perf/util/stat-shadow.c') diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c index 719d6cb86952..a04cf56d3517 100644 --- a/tools/perf/util/stat-shadow.c +++ b/tools/perf/util/stat-shadow.c @@ -70,7 +70,11 @@ static int saved_value_cmp(struct rb_node *rb_node, const void *entry) return a->ctx - b->ctx; if (a->cpu != b->cpu) return a->cpu - b->cpu; - return a->evsel - b->evsel; + if (a->evsel == b->evsel) + return 0; + if ((char *)a->evsel < (char *)b->evsel) + return -1; + return +1; } static struct rb_node *saved_value_new(struct rblist *rblist __maybe_unused, -- cgit From b24413180f5600bcb3bb70fbed5cf186b60864bd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 1 Nov 2017 15:07:57 +0100 Subject: License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman --- tools/perf/util/stat-shadow.c | 1 + 1 file changed, 1 insertion(+) (limited to 'tools/perf/util/stat-shadow.c') diff --git a/tools/perf/util/stat-shadow.c b/tools/perf/util/stat-shadow.c index a04cf56d3517..37363869c9a1 100644 --- a/tools/perf/util/stat-shadow.c +++ b/tools/perf/util/stat-shadow.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 #include #include "evsel.h" #include "stat.h" -- cgit