/* * Copyright 2012 Sascha Hauer , Pengutronix * Copyright 2012 Steffen Trumtrar , Pengutronix * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /dts-v1/; /include/ "imx53-tqma53.dtsi" / { model = "TQ MBa53 starter kit"; compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; }; &iomuxc { lvds1 { pinctrl_lvds1_1: lvds1-grp1 { fsl,pins = <730 0x10000 /* LVDS0_TX3 */ 732 0x10000 /* LVDS0_CLK */ 734 0x10000 /* LVDS0_TX2 */ 736 0x10000 /* LVDS0_TX1 */ 738 0x10000>; /* LVDS0_TX0 */ }; pinctrl_lvds1_2: lvds1-grp2 { fsl,pins = <720 0x10000 /* LVDS1_TX3 */ 722 0x10000 /* LVDS1_TX2 */ 724 0x10000 /* LVDS1_CLK */ 726 0x10000 /* LVDS1_TX1 */ 728 0x10000>; /* LVDS1_TX0 */ }; }; disp1 { pinctrl_disp1_1: disp1-grp1 { fsl,pins = <689 0x10000 /* DISP1_DRDY */ 482 0x10000 /* DISP1_HSYNC */ 489 0x10000 /* DISP1_VSYNC */ 515 0x10000 /* DISP1_DAT_22 */ 523 0x10000 /* DISP1_DAT_23 */ 545 0x10000 /* DISP1_DAT_21 */ 553 0x10000 /* DISP1_DAT_20 */ 558 0x10000 /* DISP1_DAT_19 */ 564 0x10000 /* DISP1_DAT_18 */ 570 0x10000 /* DISP1_DAT_17 */ 575 0x10000 /* DISP1_DAT_16 */ 580 0x10000 /* DISP1_DAT_15 */ 585 0x10000 /* DISP1_DAT_14 */ 590 0x10000 /* DISP1_DAT_13 */ 595 0x10000 /* DISP1_DAT_12 */ 628 0x10000 /* DISP1_DAT_11 */ 634 0x10000 /* DISP1_DAT_10 */ 639 0x10000 /* DISP1_DAT_9 */ 644 0x10000 /* DISP1_DAT_8 */ 649 0x10000 /* DISP1_DAT_7 */ 654 0x10000 /* DISP1_DAT_6 */ 659 0x10000 /* DISP1_DAT_5 */ 664 0x10000 /* DISP1_DAT_4 */ 669 0x10000 /* DISP1_DAT_3 */ 674 0x10000 /* DISP1_DAT_2 */ 679 0x10000 /* DISP1_DAT_1 */ 684 0x10000>; /* DISP1_DAT_0 */ }; }; }; &cspi { status = "okay"; }; &i2c2 { codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; }; expander: pca9554@20 { compatible = "pca9554"; reg = <0x20>; interrupts = <109>; }; sensor2: lm75@49 { compatible = "lm75"; reg = <0x49>; }; }; &fec { status = "okay"; }; &esdhc2 { status = "okay"; }; &uart3 { status = "okay"; }; &ecspi1 { status = "okay"; }; &uart1 { status = "okay"; }; &uart2 { status = "okay"; }; &can1 { status = "okay"; }; &can2 { status = "okay"; }; &i2c3 { status = "okay"; };