/* * arch/arm/mach-ixp4xx/common.c * * Generic code shared across all IXP4XX platforms * * Maintainer: Deepak Saxena * * Copyright 2002 (c) Intel Corporation * Copyright 2003-2004 (c) MontaVista, Software, Inc. * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "irqs.h" #define IXP4XX_TIMER_FREQ 66666000 /************************************************************************* * IXP4xx chipset I/O mapping *************************************************************************/ static struct map_desc ixp4xx_io_desc[] __initdata = { { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */ .virtual = (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT, .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS), .length = IXP4XX_PERIPHERAL_REGION_SIZE, .type = MT_DEVICE }, { /* Expansion Bus Config Registers */ .virtual = (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT, .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), .length = IXP4XX_EXP_CFG_REGION_SIZE, .type = MT_DEVICE }, { /* PCI Registers */ .virtual = (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT, .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE }, }; void __init ixp4xx_map_io(void) { iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc)); } void __init ixp4xx_init_irq(void) { /* * ixp4xx does not implement the XScale PWRMODE register * so it must not call cpu_do_idle(). */ cpu_idle_poll_ctrl(true); ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS, (cpu_is_ixp46x() || cpu_is_ixp43x())); } void __init ixp4xx_timer_init(void) { return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS, IRQ_IXP4XX_TIMER1, IXP4XX_TIMER_FREQ); } static struct pxa2xx_udc_mach_info ixp4xx_udc_info; void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info) { memcpy(&ixp4xx_udc_info, info, sizeof *info); } static struct resource ixp4xx_udc_resources[] = { [0] = { .start = 0xc800b000, .end = 0xc800bfff, .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_IXP4XX_USB, .end = IRQ_IXP4XX_USB, .flags = IORESOURCE_IRQ, }, }; static struct resource ixp4xx_gpio_resource[] = { { .start = IXP4XX_GPIO_BASE_PHYS, .end = IXP4XX_GPIO_BASE_PHYS + 0xfff, .flags = IORESOURCE_MEM, }, }; static struct platform_device ixp4xx_gpio_device = { .name = "ixp4xx-gpio", .id = -1, .dev = { .coherent_dma_mask = DMA_BIT_MASK(32), }, .resource = ixp4xx_gpio_resource, .num_resources = ARRAY_SIZE(ixp4xx_gpio_resource), }; /* * USB device controller. The IXP4xx uses the same controller as PXA25X, * so we just use the same device. */ static struct platform_device ixp4xx_udc_device = { .name = "pxa25x-udc", .id = -1, .num_resources = 2, .resource = ixp4xx_udc_resources, .dev = { .platform_data = &ixp4xx_udc_info, }, }; static struct resource ixp4xx_npe_resources[] = { { .start = IXP4XX_NPEA_BASE_PHYS, .end = IXP4XX_NPEA_BASE_PHYS + 0xfff, .flags = IORESOURCE_MEM, }, { .start = IXP4XX_NPEB_BASE_PHYS, .end = IXP4XX_NPEB_BASE_PHYS + 0xfff, .flags = IORESOURCE_MEM, }, { .start = IXP4XX_NPEC_BASE_PHYS, .end = IXP4XX_NPEC_BASE_PHYS + 0xfff, .flags = IORESOURCE_MEM, }, }; static struct platform_device ixp4xx_npe_device = { .name = "ixp4xx-npe", .id = -1, .num_resources = ARRAY_SIZE(ixp4xx_npe_resources), .resource = ixp4xx_npe_resources, }; static struct resource ixp4xx_qmgr_resources[] = { { .start = IXP4XX_QMGR_BASE_PHYS, .end = IXP4XX_QMGR_BASE_PHYS + 0x3fff, .flags = IORESOURCE_MEM, }, { .start = IRQ_IXP4XX_QM1, .end = IRQ_IXP4XX_QM1, .flags = IORESOURCE_IRQ, }, { .start = IRQ_IXP4XX_QM2, .end = IRQ_IXP4XX_QM2, .flags = IORESOURCE_IRQ, }, }; static struct platform_device ixp4xx_qmgr_device = { .name = "ixp4xx-qmgr", .id = -1, .num_resources = ARRAY_SIZE(ixp4xx_qmgr_resources), .resource = ixp4xx_qmgr_resources, }; static struct platform_device *ixp4xx_devices[] __initdata = { &ixp4xx_npe_device, &ixp4xx_qmgr_device, &ixp4xx_gpio_device, &ixp4xx_udc_device, }; static struct resource ixp46x_i2c_resources[] = { [0] = { .start = 0xc8011000, .end = 0xc801101c, .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_IXP4XX_I2C, .end = IRQ_IXP4XX_I2C, .flags = IORESOURCE_IRQ } }; /* * I2C controller. The IXP46x uses the same block as the IOP3xx, so * we just use the same device name. */ static struct platform_device ixp46x_i2c_controller = { .name = "IOP3xx-I2C", .id = 0, .num_resources = 2, .resource = ixp46x_i2c_resources }; static struct platform_device *ixp46x_devices[] __initdata = { &ixp46x_i2c_controller }; unsigned long ixp4xx_exp_bus_size; EXPORT_SYMBOL(ixp4xx_exp_bus_size); void __init ixp4xx_sys_init(void) { ixp4xx_exp_bus_size = SZ_16M; platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); if (cpu_is_ixp46x()) { int region; platform_add_devices(ixp46x_devices, ARRAY_SIZE(ixp46x_devices)); for (region = 0; region < 7; region++) { if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) { ixp4xx_exp_bus_size = SZ_32M; break; } } } printk("IXP4xx: Using %luMiB expansion bus window size\n", ixp4xx_exp_bus_size >> 20); } unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); void ixp4xx_restart(enum reboot_mode mode, const char *cmd) { if (mode == REBOOT_SOFT) { /* Jump into ROM at address 0 */ soft_restart(0); } else { /* Use on-chip reset capability */ /* set the "key" register to enable access to * "timer" and "enable" registers */ *IXP4XX_OSWK = IXP4XX_WDT_KEY; /* write 0 to the timer register for an immediate reset */ *IXP4XX_OSWT = 0; *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE; } } #ifdef CONFIG_PCI static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) { return (dma_addr + size) > SZ_64M; } static int ixp4xx_platform_notify_remove(struct device *dev) { if (dev_is_pci(dev)) dmabounce_unregister_dev(dev); return 0; } #endif /* * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things. */ static int ixp4xx_platform_notify(struct device *dev) { dev->dma_mask = &dev->coherent_dma_mask; #ifdef CONFIG_PCI if (dev_is_pci(dev)) { dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */ dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); return 0; } #endif dev->coherent_dma_mask = DMA_BIT_MASK(32); return 0; } int dma_set_coherent_mask(struct device *dev, u64 mask) { if (dev_is_pci(dev)) mask &= DMA_BIT_MASK(28); /* 64 MB */ if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) { dev->coherent_dma_mask = mask; return 0; } return -EIO; /* device wanted sub-64MB mask */ } EXPORT_SYMBOL(dma_set_coherent_mask); #ifdef CONFIG_IXP4XX_INDIRECT_PCI /* * In the case of using indirect PCI, we simply return the actual PCI * address and our read/write implementation use that to drive the * access registers. If something outside of PCI is ioremap'd, we * fallback to the default. */ static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size, unsigned int mtype, void *caller) { if (!is_pci_memory(addr)) return __arm_ioremap_caller(addr, size, mtype, caller); return (void __iomem *)addr; } static void ixp4xx_iounmap(volatile void __iomem *addr) { if (!is_pci_memory((__force u32)addr)) __iounmap(addr); } #endif void __init ixp4xx_init_early(void) { platform_notify = ixp4xx_platform_notify; #ifdef CONFIG_PCI platform_notify_remove = ixp4xx_platform_notify_remove; #endif #ifdef CONFIG_IXP4XX_INDIRECT_PCI arch_ioremap_caller = ixp4xx_ioremap_caller; arch_iounmap = ixp4xx_iounmap; #endif }