// SPDX-License-Identifier: GPL-2.0-only /* * linux/arch/arm/mach-omap2/clock.c * * Copyright (C) 2005-2008 Texas Instruments, Inc. * Copyright (C) 2004-2010 Nokia Corporation * * Contacts: * Richard Woodruff * Paul Walmsley */ #undef DEBUG #include #include #include #include #include #include #include #include #include #include #include #include #include #include "soc.h" #include "clockdomain.h" #include "clock.h" #include "cm.h" #include "cm2xxx.h" #include "cm3xxx.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" #include "common.h" u16 cpu_mask; /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ #define OMAP3430_DPLL_FINT_BAND1_MIN 750000 #define OMAP3430_DPLL_FINT_BAND1_MAX 2100000 #define OMAP3430_DPLL_FINT_BAND2_MIN 7500000 #define OMAP3430_DPLL_FINT_BAND2_MAX 21000000 /* * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx. * From device data manual section 4.3 "DPLL and DLL Specifications". */ #define OMAP3PLUS_DPLL_FINT_MIN 32000 #define OMAP3PLUS_DPLL_FINT_MAX 52000000 struct ti_clk_ll_ops omap_clk_ll_ops = { .clkdm_clk_enable = clkdm_clk_enable, .clkdm_clk_disable = clkdm_clk_disable, .clkdm_lookup = clkdm_lookup, .cm_wait_module_ready = omap_cm_wait_module_ready, .cm_split_idlest_reg = cm_split_idlest_reg, }; /** * omap2_clk_setup_ll_ops - setup clock driver low-level ops * * Sets up clock driver low-level platform ops. These are needed * for register accesses and various other misc platform operations. * Returns 0 on success, -EBUSY if low level ops have been registered * already. */ int __init omap2_clk_setup_ll_ops(void) { return ti_clk_setup_ll_ops(&omap_clk_ll_ops); } /* * OMAP2+ specific clock functions */ /** * ti_clk_init_features - init clock features struct for the SoC * * Initializes the clock features struct based on the SoC type. */ void __init ti_clk_init_features(void) { struct ti_clk_features features = { 0 }; /* Fint setup for DPLLs */ if (cpu_is_omap3430()) { features.fint_min = OMAP3430_DPLL_FINT_BAND1_MIN; features.fint_max = OMAP3430_DPLL_FINT_BAND2_MAX; features.fint_band1_max = OMAP3430_DPLL_FINT_BAND1_MAX; features.fint_band2_min = OMAP3430_DPLL_FINT_BAND2_MIN; } else { features.fint_min = OMAP3PLUS_DPLL_FINT_MIN; features.fint_max = OMAP3PLUS_DPLL_FINT_MAX; } /* Bypass value setup for DPLLs */ if (cpu_is_omap24xx()) { features.dpll_bypass_vals |= (1 << OMAP2XXX_EN_DPLL_LPBYPASS) | (1 << OMAP2XXX_EN_DPLL_FRBYPASS); } else if (cpu_is_omap34xx()) { features.dpll_bypass_vals |= (1 << OMAP3XXX_EN_DPLL_LPBYPASS) | (1 << OMAP3XXX_EN_DPLL_FRBYPASS); } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx() || soc_is_omap54xx() || soc_is_dra7xx()) { features.dpll_bypass_vals |= (1 << OMAP4XXX_EN_DPLL_LPBYPASS) | (1 << OMAP4XXX_EN_DPLL_FRBYPASS) | (1 << OMAP4XXX_EN_DPLL_MNBYPASS); } /* Jitter correction only available on OMAP343X */ if (cpu_is_omap343x()) features.flags |= TI_CLK_DPLL_HAS_FREQSEL; if (omap_type() == OMAP2_DEVICE_TYPE_GP) features.flags |= TI_CLK_DEVICE_TYPE_GP; /* Idlest value for interface clocks. * 24xx uses 0 to indicate not ready, and 1 to indicate ready. * 34xx reverses this, just to keep us on our toes * AM35xx uses both, depending on the module. */ if (cpu_is_omap24xx()) features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL; else if (cpu_is_omap34xx()) features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL; /* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */ if (omap_rev() == OMAP3430_REV_ES1_0) features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM; /* Errata I810 for omap5 / dra7 */ if (soc_is_omap54xx() || soc_is_dra7xx()) features.flags |= TI_CLK_ERRATA_I810; ti_clk_setup_features(&features); }