// SPDX-License-Identifier: (GPL-2.0+ or MIT) /* * Copyright (C) 2023 Martin Botka . */ /dts-v1/; #include "sun50i-h616.dtsi" #include #include #include / { aliases { ethernet0 = &rtl8189ftv; }; leds { compatible = "gpio-leds"; led-0 { function = LED_FUNCTION_STATUS; color = ; gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ }; }; reg_vcc5v: regulator-vcc5v { /* board wide 5V supply from carrier boards */ compatible = "regulator-fixed"; regulator-name = "vcc-5v"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; reg_vcc33_wifi: vcc33-wifi { compatible = "regulator-fixed"; regulator-name = "vcc33-wifi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; vin-supply = <®_vcc5v>; }; reg_vcc_wifi_io: vcc-wifi-io { compatible = "regulator-fixed"; regulator-name = "vcc-wifi-io"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; vin-supply = <®_vcc33_wifi>; }; wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rtc 1>; clock-names = "ext_clock"; reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ post-power-on-delay-ms = <200>; }; }; &mmc0 { vmmc-supply = <®_dldo1>; /* Card detection pin is not connected */ broken-cd; bus-width = <4>; status = "okay"; }; &mmc1 { vmmc-supply = <®_vcc33_wifi>; vqmmc-supply = <®_vcc_wifi_io>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; mmc-ddr-1_8v; status = "okay"; rtl8189ftv: wifi@1 { reg = <1>; }; }; &r_i2c { status = "okay"; axp313a: pmic@36 { compatible = "x-powers,axp313a"; reg = <0x36>; interrupt-controller; #interrupt-cells = <1>; regulators{ reg_dcdc1: dcdc1 { regulator-name = "vdd-gpu-sys"; regulator-min-microvolt = <810000>; regulator-max-microvolt = <990000>; regulator-always-on; }; reg_dcdc2: dcdc2 { regulator-name = "vdd-cpu"; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1100000>; regulator-ramp-delay = <200>; regulator-always-on; }; reg_dcdc3: dcdc3 { regulator-name = "vcc-dram"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1500000>; regulator-always-on; }; reg_aldo1: aldo1 { regulator-name = "vcc-1v8-pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; reg_dldo1: dldo1 { regulator-name = "vcc-3v3-io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; }; &usbphy { status = "okay"; };