// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2021 Gateworks Corporation */ /dts-v1/; #include #include #include #include #include "imx8mp.dtsi" / { model = "Gateworks Venice GW74xx i.MX8MP board"; compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp"; aliases { ethernet0 = &eqos; ethernet1 = &fec; ethernet2 = &lan1; ethernet3 = &lan2; ethernet4 = &lan3; ethernet5 = &lan4; ethernet6 = &lan5; }; chosen { stdout-path = &uart2; }; memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0 0x80000000>; }; connector { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbcon1>; compatible = "gpio-usb-b-connector", "usb-b-connector"; type = "micro"; label = "Type-C"; id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; port { usb_dr_connector: endpoint { remote-endpoint = <&usb3_dwc>; }; }; }; gpio-keys { compatible = "gpio-keys"; key-0 { label = "user_pb"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,code = ; }; key-1 { label = "user_pb1x"; linux,code = ; interrupt-parent = <&gsc>; interrupts = <0>; }; key-2 { label = "key_erased"; linux,code = ; interrupt-parent = <&gsc>; interrupts = <1>; }; key-3 { label = "eeprom_wp"; linux,code = ; interrupt-parent = <&gsc>; interrupts = <2>; }; key-4 { label = "tamper"; linux,code = ; interrupt-parent = <&gsc>; interrupts = <5>; }; key-5 { label = "switch_hold"; linux,code = ; interrupt-parent = <&gsc>; interrupts = <7>; }; }; led-controller { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; led-0 { function = LED_FUNCTION_HEARTBEAT; color = ; gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; led-1 { function = LED_FUNCTION_STATUS; color = ; gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; pcie0_refclk: pcie0-refclk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <100000000>; }; pps { compatible = "pps-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pps>; gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; reg_usb2_vbus: regulator-usb2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usb2>; compatible = "regulator-fixed"; regulator-name = "usb_usb2_vbus"; gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; reg_can1_stby: regulator-can1-stby { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_can1>; regulator-name = "can1_stby"; gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; reg_can2_stby: regulator-can2-stby { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_can2>; regulator-name = "can2_stby"; gpio = <&gpio5 5 GPIO_ACTIVE_LOW>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; reg_wifi_en: regulator-wifi-en { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_wifi>; compatible = "regulator-fixed"; regulator-name = "wl"; gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; startup-delay-us = <70000>; enable-active-high; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; }; &A53_0 { cpu-supply = <®_arm>; }; &A53_1 { cpu-supply = <®_arm>; }; &A53_2 { cpu-supply = <®_arm>; }; &A53_3 { cpu-supply = <®_arm>; }; &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; status = "okay"; tpm@0 { compatible = "atmel,attpm20p", "tcg,tpm_tis-spi"; reg = <0x0>; spi-max-frequency = <36000000>; }; }; /* off-board header */ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; status = "okay"; }; &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; status = "okay"; mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; }; }; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; status = "okay"; fixed-link { speed = <1000>; full-duplex; }; }; &flexcan1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; xceiver-supply = <®_can1_stby>; status = "okay"; }; &flexcan2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; xceiver-supply = <®_can2_stby>; status = "okay"; }; &gpio1 { gpio-line-names = "", "", "", "", "", "", "", "", "", "dio0", "", "dio1", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; &gpio2 { gpio-line-names = "", "", "", "", "", "", "m2_pin20", "", "", "", "", "", "", "pcie1_wdis#", "pcie3_wdis#", "", "", "", "pcie2_wdis#", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; &gpio3 { gpio-line-names = "", "", "", "", "", "", "m2_rst", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; &gpio4 { gpio-line-names = "", "", "m2_off#", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "m2_wdis#", "", "", "", "", "", "", "", "", "", "", "", "", "rs485_en"; }; &gpio5 { gpio-line-names = "rs485_hd", "rs485_term", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", ""; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; gsc: gsc@20 { compatible = "gw,gsc"; reg = <0x20>; pinctrl-0 = <&pinctrl_gsc>; interrupt-parent = <&gpio4>; interrupts = <20 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <1>; #address-cells = <1>; #size-cells = <0>; adc { compatible = "gw,gsc-adc"; #address-cells = <1>; #size-cells = <0>; channel@6 { gw,mode = <0>; reg = <0x06>; label = "temp"; }; channel@8 { gw,mode = <3>; reg = <0x08>; label = "vdd_bat"; }; channel@16 { gw,mode = <4>; reg = <0x16>; label = "fan_tach"; }; channel@82 { gw,mode = <2>; reg = <0x82>; label = "vdd_adc1"; gw,voltage-divider-ohms = <10000 10000>; }; channel@84 { gw,mode = <2>; reg = <0x84>; label = "vdd_adc2"; gw,voltage-divider-ohms = <10000 10000>; }; channel@86 { gw,mode = <2>; reg = <0x86>; label = "vdd_vin"; gw,voltage-divider-ohms = <22100 1000>; }; channel@88 { gw,mode = <2>; reg = <0x88>; label = "vdd_3p3"; gw,voltage-divider-ohms = <10000 10000>; }; channel@8c { gw,mode = <2>; reg = <0x8c>; label = "vdd_2p5"; gw,voltage-divider-ohms = <10000 10000>; }; channel@90 { gw,mode = <2>; reg = <0x90>; label = "vdd_soc"; }; channel@92 { gw,mode = <2>; reg = <0x92>; label = "vdd_arm"; }; channel@98 { gw,mode = <2>; reg = <0x98>; label = "vdd_1p8"; }; channel@9a { gw,mode = <2>; reg = <0x9a>; label = "vdd_1p2"; }; channel@9c { gw,mode = <2>; reg = <0x9c>; label = "vdd_dram"; }; channel@a2 { gw,mode = <2>; reg = <0xa2>; label = "vdd_gsc"; gw,voltage-divider-ohms = <10000 10000>; }; }; fan-controller@a { compatible = "gw,gsc-fan"; reg = <0x0a>; }; }; gpio: gpio@23 { compatible = "nxp,pca9555"; reg = <0x23>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&gsc>; interrupts = <4>; }; eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; pagesize = <16>; }; eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; pagesize = <16>; }; eeprom@52 { compatible = "atmel,24c02"; reg = <0x52>; pagesize = <16>; }; eeprom@53 { compatible = "atmel,24c02"; reg = <0x53>; pagesize = <16>; }; rtc@68 { compatible = "dallas,ds1672"; reg = <0x68>; }; }; &i2c2 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; accelerometer@19 { compatible = "st,lis2de12"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_accel>; reg = <0x19>; st,drdy-int-pin = <1>; interrupt-parent = <&gpio1>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; }; switch: switch@5f { compatible = "microchip,ksz9897"; reg = <0x5f>; pinctrl-0 = <&pinctrl_ksz>; interrupt-parent = <&gpio4>; interrupts = <29 IRQ_TYPE_EDGE_FALLING>; ports { #address-cells = <1>; #size-cells = <0>; lan1: port@0 { reg = <0>; label = "lan1"; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan2: port@1 { reg = <1>; label = "lan2"; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan3: port@2 { reg = <2>; label = "lan3"; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan4: port@3 { reg = <3>; label = "lan4"; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; lan5: port@4 { reg = <4>; label = "lan5"; phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; }; port@5 { reg = <5>; ethernet = <&fec>; phy-mode = "rgmii-id"; fixed-link { speed = <1000>; full-duplex; }; }; }; }; }; &i2c3 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_gpio>; scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; pmic@25 { compatible = "nxp,pca9450c"; reg = <0x25>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio3>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; regulators { BUCK1 { regulator-name = "BUCK1"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1000000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; }; reg_arm: BUCK2 { regulator-name = "BUCK2"; regulator-min-microvolt = <720000>; regulator-max-microvolt = <1025000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; nxp,dvs-run-voltage = <950000>; nxp,dvs-standby-voltage = <850000>; }; BUCK4 { regulator-name = "BUCK4"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3600000>; regulator-boot-on; regulator-always-on; }; BUCK5 { regulator-name = "BUCK5"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1950000>; regulator-boot-on; regulator-always-on; }; BUCK6 { regulator-name = "BUCK6"; regulator-min-microvolt = <1045000>; regulator-max-microvolt = <1155000>; regulator-boot-on; regulator-always-on; }; LDO1 { regulator-name = "LDO1"; regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1950000>; regulator-boot-on; regulator-always-on; }; LDO3 { regulator-name = "LDO3"; regulator-min-microvolt = <1710000>; regulator-max-microvolt = <1890000>; regulator-boot-on; regulator-always-on; }; LDO5 { regulator-name = "LDO5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; }; }; }; /* off-board header */ &i2c4 { clock-frequency = <400000>; pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c4>; pinctrl-1 = <&pinctrl_i2c4_gpio>; scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; &pcie_phy { fsl,refclk-pad-mode = ; fsl,clkreq-unsupported; clocks = <&pcie0_refclk>; clock-names = "ref"; status = "okay"; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio2 17 GPIO_ACTIVE_LOW>; status = "okay"; }; /* GPS / off-board header */ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; /* RS232 console */ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; /* bluetooth HCI */ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>; cts-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>; rts-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; status = "okay"; bluetooth { compatible = "brcm,bcm4330-bt"; shutdown-gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; }; }; &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; status = "okay"; }; /* USB1 - Type C front panel */ &usb3_0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; fsl,over-current-active-low; status = "okay"; }; &usb3_phy0 { status = "okay"; }; &usb_dwc3_0 { /* dual role is implemented but not a full featured OTG */ adp-disable; hnp-disable; srp-disable; dr_mode = "otg"; usb-role-switch; role-switch-default-mode = "peripheral"; status = "okay"; port { usb3_dwc: endpoint { remote-endpoint = <&usb_dr_connector>; }; }; }; /* USB2 - USB3.0 Hub */ &usb3_phy1 { vbus-supply = <®_usb2_vbus>; status = "okay"; }; &usb3_1 { fsl,permanently-attached; fsl,disable-port-power-control; status = "okay"; }; &usb_dwc3_1 { dr_mode = "host"; status = "okay"; }; /* SDIO WiFi */ &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <4>; non-removable; vmmc-supply = <®_wifi_en>; #address-cells = <1>; #size-cells = <0>; status = "okay"; wifi@0 { compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac"; reg = <0>; }; }; /* eMMC */ &usdhc3 { assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; bus-width = <8>; non-removable; status = "okay"; }; &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; status = "okay"; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; pinctrl_hog: hoggrp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x40000040 /* M2SKT_OFF# */ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */ MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x40000040 /* M2SKT_PIN20 */ MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000040 /* M2SKT_PIN22 */ MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13 0x40000150 /* PCIE1_WDIS# */ MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */ MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */ MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */ MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */ MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */ MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */ >; }; pinctrl_accel: accelgrp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x150 >; }; pinctrl_eqos: eqosgrp { fsl,pins = < MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x140 /* RST# */ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x150 /* IRQ# */ >; }; pinctrl_fec: fecgrp { fsl,pins = < MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90 MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90 MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90 MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90 MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90 MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90 MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16 MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16 MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16 MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16 MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16 MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16 MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x140 MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x140 >; }; pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 >; }; pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 >; }; pinctrl_gsc: gscgrp { fsl,pins = < MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x150 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 >; }; pinctrl_i2c1_gpio: i2c1gpiogrp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001c2 MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001c2 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 >; }; pinctrl_i2c2_gpio: i2c2gpiogrp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001c3 MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001c3 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 >; }; pinctrl_i2c3_gpio: i2c3gpiogrp { fsl,pins = < MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x400001c3 MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c3 >; }; pinctrl_i2c4: i2c4grp { fsl,pins = < MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c2 MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c2 >; }; pinctrl_i2c4_gpio: i2c4gpiogrp { fsl,pins = < MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001c3 MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001c3 >; }; pinctrl_ksz: kszgrp { fsl,pins = < MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x150 /* IRQ# */ MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x140 /* RST# */ >; }; pinctrl_gpio_leds: ledgrp { fsl,pins = < MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x10 MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x10 >; }; pinctrl_pcie0: pciegrp { fsl,pins = < MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x106 >; }; pinctrl_pmic: pmicgrp { fsl,pins = < MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x140 >; }; pinctrl_pps: ppsgrp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x140 >; }; pinctrl_reg_can1: regcan1grp { fsl,pins = < MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x154 >; }; pinctrl_reg_can2: regcan2grp { fsl,pins = < MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154 >; }; pinctrl_reg_usb2: regusb2grp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x140 >; }; pinctrl_reg_wifi: regwifigrp { fsl,pins = < MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x110 >; }; pinctrl_spi1: spi1grp { fsl,pins = < MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x82 MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x82 MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x82 MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x140 >; }; pinctrl_spi2: spi2grp { fsl,pins = < MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82 MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82 MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82 MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 >; }; pinctrl_uart2: uart2grp { fsl,pins = < MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 >; }; pinctrl_uart3: uart3grp { fsl,pins = < MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x140 MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x140 >; }; pinctrl_uart3_gpio: uart3gpiogrp { fsl,pins = < MX8MP_IOMUXC_NAND_DATA02__GPIO3_IO08 0x110 >; }; pinctrl_uart4: uart4grp { fsl,pins = < MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140 MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140 >; }; pinctrl_usb1: usb1grp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 >; }; pinctrl_usbcon1: usb1congrp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140 >; }; pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 >; }; pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194 MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4 MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4 MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4 MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4 MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4 >; }; pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196 MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6 MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6 MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6 MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6 MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 >; }; pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 >; }; pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 >; }; pinctrl_wdog: wdoggrp { fsl,pins = < MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 >; }; };