// SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2017~2018 NXP */ /dts-v1/; #include "imx8qxp.dtsi" #include / { model = "Freescale i.MX8QXP MEK"; compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp"; chosen { stdout-path = &lpuart0; }; memory@80000000 { device_type = "memory"; reg = <0x00000000 0x80000000 0 0x40000000>; }; reg_usdhc2_vmmc: usdhc2-vmmc { compatible = "regulator-fixed"; regulator-name = "SD1_SPWR"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; gpio-sbu-mux { compatible = "nxp,cbdtu02043", "gpio-sbu-mux"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_typec_mux>; select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>; enable-gpios = <&pca9557_a 7 GPIO_ACTIVE_LOW>; orientation-switch; port { usb3_data_ss: endpoint { remote-endpoint = <&typec_con_ss>; }; }; }; }; &dsp { status = "okay"; }; &dsp_reserved { status = "okay"; }; &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,magic-packet; status = "okay"; mdio { #address-cells = <1>; #size-cells = <0>; ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; }; }; }; &i2c1 { #address-cells = <1>; #size-cells = <0>; clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>; status = "okay"; i2c-mux@71 { compatible = "nxp,pca9646", "nxp,pca9546"; #address-cells = <1>; #size-cells = <0>; reg = <0x71>; reset-gpios = <&lsio_gpio1 1 GPIO_ACTIVE_LOW>; i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; max7322: gpio@68 { compatible = "maxim,max7322"; reg = <0x68>; gpio-controller; #gpio-cells = <2>; }; }; i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; }; i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; }; }; i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; pca9557_a: gpio@1a { compatible = "nxp,pca9557"; reg = <0x1a>; gpio-controller; #gpio-cells = <2>; }; pca9557_b: gpio@1d { compatible = "nxp,pca9557"; reg = <0x1d>; gpio-controller; #gpio-cells = <2>; }; light-sensor@44 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_isl29023>; compatible = "isil,isl29023"; reg = <0x44>; interrupt-parent = <&lsio_gpio1>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; }; }; }; ptn5110: tcpc@50 { compatible = "nxp,ptn5110"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_typec>; reg = <0x50>; interrupt-parent = <&lsio_gpio1>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; usb_con1: connector { compatible = "usb-c-connector"; label = "USB-C"; power-role = "source"; data-role = "dual"; source-pdos = ; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; typec_dr_sw: endpoint { remote-endpoint = <&usb3_drd_sw>; }; }; port@1 { reg = <1>; typec_con_ss: endpoint { remote-endpoint = <&usb3_data_ss>; }; }; }; }; }; }; &lpuart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart0>; status = "okay"; }; &lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; status = "okay"; }; &lpuart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart3>; status = "okay"; }; &mu_m0 { status = "okay"; }; &mu1_m0 { status = "okay"; }; &scu_key { status = "okay"; }; &thermal_zones { pmic-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; trips { pmic_alert0: trip0 { temperature = <110000>; hysteresis = <2000>; type = "passive"; }; pmic_crit0: trip1 { temperature = <125000>; hysteresis = <2000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&pmic_alert0>; cooling-device = <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; }; &usdhc1 { assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <8>; no-sd; no-sdio; non-removable; status = "okay"; }; &usdhc2 { assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; vmmc-supply = <®_usdhc2_vmmc>; cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; status = "okay"; }; &usb3_phy { status = "okay"; }; &usbotg3 { status = "okay"; }; &usbotg3_cdns3 { dr_mode = "otg"; usb-role-switch; status = "okay"; port { usb3_drd_sw: endpoint { remote-endpoint = <&typec_dr_sw>; }; }; }; &vpu { compatible = "nxp,imx8qxp-vpu"; status = "okay"; }; &vpu_core0 { reg = <0x2d040000 0x10000>; memory-region = <&decoder_boot>, <&decoder_rpc>; status = "okay"; }; &vpu_core1 { reg = <0x2d050000 0x10000>; memory-region = <&encoder_boot>, <&encoder_rpc>; status = "okay"; }; &iomuxc { pinctrl_fec1: fec1grp { fsl,pins = < IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 >; }; pinctrl_ioexp_rst: ioexprstgrp { fsl,pins = < IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 >; }; pinctrl_isl29023: isl29023grp { fsl,pins = < IMX8QXP_SPI2_SDI_LSIO_GPIO1_IO02 0x00000021 >; }; pinctrl_lpi2c1: lpi2c1grp { fsl,pins = < IMX8QXP_USB_SS3_TC1_ADMA_I2C1_SCL 0x06000021 IMX8QXP_USB_SS3_TC3_ADMA_I2C1_SDA 0x06000021 >; }; pinctrl_lpuart0: lpuart0grp { fsl,pins = < IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 >; }; pinctrl_lpuart2: lpuart2grp { fsl,pins = < IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 >; }; pinctrl_lpuart3: lpuart3grp { fsl,pins = < IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 >; }; pinctrl_typec: typecgrp { fsl,pins = < IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021 >; }; pinctrl_typec_mux: typecmuxgrp { fsl,pins = < IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x60 >; }; pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 >; }; pinctrl_usdhc2: usdhc2grp { fsl,pins = < IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 >; }; };