// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * Copyright (c) 2023, Linaro Ltd * * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. */ #include #include #include #include #include #include #include #include #include #include / { interrupt-parent = <&intc>; #address-cells = <2>; #size-cells = <2>; chosen { }; clocks { xo_board: xo-board { compatible = "fixed-clock"; #clock-cells = <0>; }; sleep_clk: sleep-clk { compatible = "fixed-clock"; clock-frequency = <32764>; #clock-cells = <0>; }; }; cpus { #address-cells = <2>; #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x0>; clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; power-domains = <&CPU_PD0>; power-domain-names = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; cache-unified; }; }; CPU1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x1>; clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; power-domains = <&CPU_PD1>; power-domain-names = "psci"; }; CPU2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x2>; clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; power-domains = <&CPU_PD2>; power-domain-names = "psci"; }; CPU3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x3>; clocks = <&cpufreq_hw 0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; power-domains = <&CPU_PD3>; power-domain-names = "psci"; }; cpu-map { cluster0 { core0 { cpu = <&CPU0>; }; core1 { cpu = <&CPU1>; }; core2 { cpu = <&CPU2>; }; core3 { cpu = <&CPU3>; }; }; }; domain-idle-states { CLUSTER_SLEEP: cluster-sleep-0 { compatible = "domain-idle-state"; arm,psci-suspend-param = <0x41000043>; entry-latency-us = <800>; exit-latency-us = <2118>; min-residency-us = <7376>; }; }; idle-states { entry-method = "psci"; CPU_SLEEP: cpu-sleep-0 { compatible = "arm,idle-state"; idle-state-name = "power-collapse"; arm,psci-suspend-param = <0x40000003>; entry-latency-us = <290>; exit-latency-us = <376>; min-residency-us = <1182>; local-timer-stop; }; }; }; firmware { scm: scm { compatible = "qcom,scm-qcm2290", "qcom,scm"; clocks = <&rpmcc RPM_SMD_CE1_CLK>; clock-names = "core"; #reset-cells = <1>; interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; }; }; memory@40000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ reg = <0 0x40000000 0 0>; }; pmu { compatible = "arm,armv8-pmuv3"; interrupts = ; }; psci { compatible = "arm,psci-1.0"; method = "smc"; CPU_PD0: power-domain-cpu0 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&CPU_SLEEP>; }; CPU_PD1: power-domain-cpu1 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&CPU_SLEEP>; }; CPU_PD2: power-domain-cpu2 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&CPU_SLEEP>; }; CPU_PD3: power-domain-cpu3 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; domain-idle-states = <&CPU_SLEEP>; }; CLUSTER_PD: power-domain-cpu-cluster { #power-domain-cells = <0>; power-domains = <&mpm>; domain-idle-states = <&CLUSTER_SLEEP>; }; }; rpm: remoteproc { compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc"; glink-edge { compatible = "qcom,glink-rpm"; interrupts = ; qcom,rpm-msg-ram = <&rpm_msg_ram>; mboxes = <&apcs_glb 0>; rpm_requests: rpm-requests { compatible = "qcom,rpm-qcm2290"; qcom,glink-channels = "rpm_requests"; rpmcc: clock-controller { compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc"; clocks = <&xo_board>; clock-names = "xo"; #clock-cells = <1>; }; rpmpd: power-controller { compatible = "qcom,qcm2290-rpmpd"; #power-domain-cells = <1>; operating-points-v2 = <&rpmpd_opp_table>; rpmpd_opp_table: opp-table { compatible = "operating-points-v2"; rpmpd_opp_min_svs: opp1 { opp-level = ; }; rpmpd_opp_low_svs: opp2 { opp-level = ; }; rpmpd_opp_svs: opp3 { opp-level = ; }; rpmpd_opp_svs_plus: opp4 { opp-level = ; }; rpmpd_opp_nom: opp5 { opp-level = ; }; rpmpd_opp_nom_plus: opp6 { opp-level = ; }; rpmpd_opp_turbo: opp7 { opp-level = ; }; rpmpd_opp_turbo_plus: opp8 { opp-level = ; }; }; }; }; }; mpm: interrupt-controller { compatible = "qcom,mpm"; qcom,rpm-msg-ram = <&apss_mpm>; interrupts = ; mboxes = <&apcs_glb 1>; interrupt-controller; #interrupt-cells = <2>; #power-domain-cells = <0>; interrupt-parent = <&intc>; qcom,mpm-pin-count = <96>; qcom,mpm-pin-map = <2 275>, /* TSENS0 uplow */ <5 296>, /* Soundwire master_irq */ <12 422>, /* DWC3 ss_phy_irq */ <24 79>, /* Soundwire wake_irq */ <86 183>, /* MPM wake, SPMI */ <90 260>; /* QUSB2_PHY DP+DM */ }; }; reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; hyp_mem: hyp@45700000 { reg = <0x0 0x45700000 0x0 0x600000>; no-map; }; xbl_aop_mem: xbl-aop@45e00000 { reg = <0x0 0x45e00000 0x0 0x140000>; no-map; }; sec_apps_mem: sec-apps@45fff000 { reg = <0x0 0x45fff000 0x0 0x1000>; no-map; }; smem_mem: smem@46000000 { compatible = "qcom,smem"; reg = <0x0 0x46000000 0x0 0x200000>; no-map; hwlocks = <&tcsr_mutex 3>; qcom,rpm-msg-ram = <&rpm_msg_ram>; }; pil_modem_mem: modem@4ab00000 { reg = <0x0 0x4ab00000 0x0 0x6900000>; no-map; }; pil_video_mem: video@51400000 { reg = <0x0 0x51400000 0x0 0x500000>; no-map; }; wlan_msa_mem: wlan-msa@51900000 { reg = <0x0 0x51900000 0x0 0x100000>; no-map; }; pil_adsp_mem: adsp@51a00000 { reg = <0x0 0x51a00000 0x0 0x1c00000>; no-map; }; pil_ipa_fw_mem: ipa-fw@53600000 { reg = <0x0 0x53600000 0x0 0x10000>; no-map; }; pil_ipa_gsi_mem: ipa-gsi@53610000 { reg = <0x0 0x53610000 0x0 0x5000>; no-map; }; pil_gpu_mem: zap@53615000 { compatible = "shared-dma-pool"; reg = <0x0 0x53615000 0x0 0x2000>; no-map; }; cont_splash_memory: framebuffer@5c000000 { reg = <0x0 0x5c000000 0x0 0x00f00000>; no-map; }; dfps_data_memory: dpfs-data@5cf00000 { reg = <0x0 0x5cf00000 0x0 0x0100000>; no-map; }; removed_mem: reserved@60000000 { reg = <0x0 0x60000000 0x0 0x3900000>; no-map; }; rmtfs_mem: memory@89b01000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0x89b01000 0x0 0x200000>; no-map; qcom,client-id = <1>; qcom,vmid = ; }; }; smp2p-adsp { compatible = "qcom,smp2p"; qcom,smem = <443>, <429>; interrupts = ; mboxes = <&apcs_glb 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; adsp_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; adsp_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; }; smp2p-mpss { compatible = "qcom,smp2p"; qcom,smem = <435>, <428>; interrupts = ; mboxes = <&apcs_glb 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; modem_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; #qcom,smem-state-cells = <1>; }; modem_smp2p_in: slave-kernel { qcom,entry-name = "slave-kernel"; interrupt-controller; #interrupt-cells = <2>; }; wlan_smp2p_in: wlan-wpss-to-ap { qcom,entry-name = "wlan"; interrupt-controller; #interrupt-cells = <2>; }; }; soc: soc@0 { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0 0x10 0>; dma-ranges = <0 0 0 0 0x10 0>; tcsr_mutex: hwlock@340000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x00340000 0x0 0x20000>; #hwlock-cells = <1>; }; tcsr_regs: syscon@3c0000 { compatible = "qcom,qcm2290-tcsr", "syscon"; reg = <0x0 0x003c0000 0x0 0x40000>; }; tlmm: pinctrl@500000 { compatible = "qcom,qcm2290-tlmm"; reg = <0x0 0x00500000 0x0 0x300000>; interrupts = ; gpio-controller; gpio-ranges = <&tlmm 0 0 127>; wakeup-parent = <&mpm>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; qup_i2c0_default: qup-i2c0-default-state { pins = "gpio0", "gpio1"; function = "qup0"; drive-strength = <2>; bias-pull-up; }; qup_i2c1_default: qup-i2c1-default-state { pins = "gpio4", "gpio5"; function = "qup1"; drive-strength = <2>; bias-pull-up; }; qup_i2c2_default: qup-i2c2-default-state { pins = "gpio6", "gpio7"; function = "qup2"; drive-strength = <2>; bias-pull-up; }; qup_i2c3_default: qup-i2c3-default-state { pins = "gpio8", "gpio9"; function = "qup3"; drive-strength = <2>; bias-pull-up; }; qup_i2c4_default: qup-i2c4-default-state { pins = "gpio12", "gpio13"; function = "qup4"; drive-strength = <2>; bias-pull-up; }; qup_i2c5_default: qup-i2c5-default-state { pins = "gpio14", "gpio15"; function = "qup5"; drive-strength = <2>; bias-pull-up; }; qup_spi0_default: qup-spi0-default-state { pins = "gpio0", "gpio1","gpio2", "gpio3"; function = "qup0"; drive-strength = <2>; bias-pull-up; }; qup_spi1_default: qup-spi1-default-state { pins = "gpio4", "gpio5", "gpio69", "gpio70"; function = "qup1"; drive-strength = <2>; bias-pull-up; }; qup_spi2_default: qup-spi2-default-state { pins = "gpio6", "gpio7", "gpio71", "gpio80"; function = "qup2"; drive-strength = <2>; bias-pull-up; }; qup_spi3_default: qup-spi3-default-state { pins = "gpio8", "gpio9", "gpio10", "gpio11"; function = "qup3"; drive-strength = <2>; bias-pull-up; }; qup_spi4_default: qup-spi4-default-state { pins = "gpio12", "gpio13", "gpio96", "gpio97"; function = "qup4"; drive-strength = <2>; bias-pull-up; }; qup_spi5_default: qup-spi5-default-state { pins = "gpio14", "gpio15", "gpio16", "gpio17"; function = "qup5"; drive-strength = <2>; bias-pull-up; }; qup_uart0_default: qup-uart0-default-state { pins = "gpio0", "gpio1", "gpio2", "gpio3"; function = "qup0"; drive-strength = <2>; bias-disable; }; qup_uart4_default: qup-uart4-default-state { pins = "gpio12", "gpio13"; function = "qup4"; drive-strength = <2>; bias-disable; }; sdc1_state_on: sdc1-on-state { clk-pins { pins = "sdc1_clk"; drive-strength = <16>; bias-disable; }; cmd-pins { pins = "sdc1_cmd"; drive-strength = <10>; bias-pull-up; }; data-pins { pins = "sdc1_data"; drive-strength = <10>; bias-pull-up; }; rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; sdc1_state_off: sdc1-off-state { clk-pins { pins = "sdc1_clk"; drive-strength = <2>; bias-disable; }; cmd-pins { pins = "sdc1_cmd"; drive-strength = <2>; bias-pull-up; }; data-pins { pins = "sdc1_data"; drive-strength = <2>; bias-pull-up; }; rclk-pins { pins = "sdc1_rclk"; bias-pull-down; }; }; sdc2_state_on: sdc2-on-state { clk-pins { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; cmd-pins { pins = "sdc2_cmd"; drive-strength = <10>; bias-pull-up; }; data-pins { pins = "sdc2_data"; drive-strength = <10>; bias-pull-up; }; }; sdc2_state_off: sdc2-off-state { clk-pins { pins = "sdc2_clk"; drive-strength = <2>; bias-disable; }; cmd-pins { pins = "sdc2_cmd"; drive-strength = <2>; bias-pull-up; }; data-pins { pins = "sdc2_data"; drive-strength = <2>; bias-pull-up; }; }; }; gcc: clock-controller@1400000 { compatible = "qcom,gcc-qcm2290"; reg = <0x0 0x01400000 0x0 0x1f0000>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; clock-names = "bi_tcxo", "sleep_clk"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; usb_hsphy: phy@1613000 { compatible = "qcom,qcm2290-qusb2-phy"; reg = <0x0 0x01613000 0x0 0x180>; clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "cfg_ahb", "ref"; resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; nvmem-cells = <&qusb2_hstx_trim>; #phy-cells = <0>; status = "disabled"; }; usb_qmpphy: phy@1615000 { compatible = "qcom,qcm2290-qmp-usb3-phy"; reg = <0x0 0x01615000 0x0 0x1000>; clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>, <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "cfg_ahb", "ref", "com_aux", "pipe"; resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>, <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>; reset-names = "phy", "phy_phy"; #clock-cells = <0>; clock-output-names = "usb3_phy_pipe_clk_src"; #phy-cells = <0>; qcom,tcsr-reg = <&tcsr_regs 0xb244>; status = "disabled"; }; system_noc: interconnect@1880000 { compatible = "qcom,qcm2290-snoc"; reg = <0x0 0x01880000 0x0 0x60200>; #interconnect-cells = <2>; qup_virt: interconnect-qup { compatible = "qcom,qcm2290-qup-virt"; #interconnect-cells = <2>; }; mmnrt_virt: interconnect-mmnrt { compatible = "qcom,qcm2290-mmnrt-virt"; #interconnect-cells = <2>; }; mmrt_virt: interconnect-mmrt { compatible = "qcom,qcm2290-mmrt-virt"; #interconnect-cells = <2>; }; }; config_noc: interconnect@1900000 { compatible = "qcom,qcm2290-cnoc"; reg = <0x0 0x01900000 0x0 0x8200>; #interconnect-cells = <2>; }; qfprom@1b44000 { compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; reg = <0x0 0x01b44000 0x0 0x3000>; #address-cells = <1>; #size-cells = <1>; qusb2_hstx_trim: hstx-trim@25b { reg = <0x25b 0x1>; bits = <1 4>; }; }; pmu@1b8e300 { compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon"; reg = <0x0 0x01b8e300 0x0 0x600>; interrupts = ; operating-points-v2 = <&cpu_bwmon_opp_table>; interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>; cpu_bwmon_opp_table: opp-table { compatible = "operating-points-v2"; opp-0 { opp-peak-kBps = <(200 * 4 * 1000)>; }; opp-1 { opp-peak-kBps = <(300 * 4 * 1000)>; }; opp-2 { opp-peak-kBps = <(451 * 4 * 1000)>; }; opp-3 { opp-peak-kBps = <(547 * 4 * 1000)>; }; opp-4 { opp-peak-kBps = <(681 * 4 * 1000)>; }; opp-5 { opp-peak-kBps = <(768 * 4 * 1000)>; }; opp-6 { opp-peak-kBps = <(1017 * 4 * 1000)>; }; opp-7 { opp-peak-kBps = <(1353 * 4 * 1000)>; }; opp-8 { opp-peak-kBps = <(1555 * 4 * 1000)>; }; opp-9 { opp-peak-kBps = <(1804 * 4 * 1000)>; }; }; }; spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x01c40000 0x0 0x1100>, <0x0 0x01e00000 0x0 0x2000000>, <0x0 0x03e00000 0x0 0x100000>, <0x0 0x03f00000 0x0 0xa0000>, <0x0 0x01c0a000 0x0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "periph_irq"; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; #size-cells = <0>; interrupt-controller; #interrupt-cells = <4>; }; tsens0: thermal-sensor@4411000 { compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2"; reg = <0x0 0x04411000 0x0 0x1ff>, <0x0 0x04410000 0x0 0x8>; #qcom,sensors = <10>; interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; rng: rng@4453000 { compatible = "qcom,prng-ee"; reg = <0x0 0x04453000 0x0 0x1000>; clocks = <&rpmcc RPM_SMD_HWKM_CLK>; clock-names = "core"; }; bimc: interconnect@4480000 { compatible = "qcom,qcm2290-bimc"; reg = <0x0 0x04480000 0x0 0x80000>; #interconnect-cells = <2>; }; rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram", "mmio-sram"; reg = <0x0 0x045f0000 0x0 0x7000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x0 0x045f0000 0x7000>; apss_mpm: sram@1b8 { reg = <0x1b8 0x48>; }; }; sram@4690000 { compatible = "qcom,rpm-stats"; reg = <0x0 0x04690000 0x0 0x10000>; }; sdhc_1: mmc@4744000 { compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0 0x04744000 0x0 0x1000>, <0x0 0x04745000 0x0 0x1000>, <0x0 0x04748000 0x0 0x8000>; reg-names = "hc", "cqhci", "ice"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, <&gcc GCC_SDCC1_APPS_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; resets = <&gcc GCC_SDCC1_BCR>; power-domains = <&rpmpd QCM2290_VDDCX>; operating-points-v2 = <&sdhc1_opp_table>; iommus = <&apps_smmu 0xc0 0x0>; interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>; interconnect-names = "sdhc-ddr", "cpu-sdhc"; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; bus-width = <8>; status = "disabled"; sdhc1_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmpd_opp_low_svs>; opp-peak-kBps = <250000 133320>; opp-avg-kBps = <102400 65000>; }; opp-192000000 { opp-hz = /bits/ 64 <192000000>; required-opps = <&rpmpd_opp_low_svs>; opp-peak-kBps = <800000 300000>; opp-avg-kBps = <204800 200000>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; required-opps = <&rpmpd_opp_svs_plus>; opp-peak-kBps = <800000 300000>; opp-avg-kBps = <204800 200000>; }; }; }; sdhc_2: mmc@4784000 { compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; reg = <0x0 0x04784000 0x0 0x1000>; reg-names = "hc"; interrupts = , ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, <&gcc GCC_SDCC2_APPS_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "core", "xo"; resets = <&gcc GCC_SDCC2_BCR>; power-domains = <&rpmpd QCM2290_VDDCX>; operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0xa0 0x0>; interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>; interconnect-names = "sdhc-ddr", "cpu-sdhc"; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; bus-width = <4>; status = "disabled"; sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmpd_opp_low_svs>; opp-peak-kBps = <250000 133320>; opp-avg-kBps = <261438 150000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmpd_opp_svs_plus>; opp-peak-kBps = <800000 300000>; opp-avg-kBps = <261438 300000>; }; }; }; gpi_dma0: dma-controller@4a00000 { compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0x0 0x04a00000 0x0 0x60000>; interrupts = , , , , , , , , , ; dma-channels = <10>; dma-channel-mask = <0x1f>; iommus = <&apps_smmu 0xf6 0x0>; #dma-cells = <3>; status = "disabled"; }; qupv3_id_0: geniqup@4ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x04ac0000 0x0 0x2000>; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; clock-names = "m-ahb", "s-ahb"; iommus = <&apps_smmu 0xe3 0x0>; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; i2c0: i2c@4a80000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a80000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c0_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi0: spi@4a80000 { compatible = "qcom,geni-spi"; reg = <0x0 0x04a80000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; clock-names = "se"; pinctrl-0 = <&qup_spi0_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; uart0: serial@4a80000 { compatible = "qcom,geni-uart"; reg = <0x0 0x04a80000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; clock-names = "se"; pinctrl-0 = <&qup_uart0_default>; pinctrl-names = "default"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; i2c1: i2c@4a84000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a84000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c1_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi1: spi@4a84000 { compatible = "qcom,geni-spi"; reg = <0x0 0x04a84000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; clock-names = "se"; pinctrl-0 = <&qup_spi1_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c2: i2c@4a88000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a88000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c2_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi2: spi@4a88000 { compatible = "qcom,geni-spi"; reg = <0x0 0x04a88000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; clock-names = "se"; pinctrl-0 = <&qup_spi2_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c3: i2c@4a8c000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a8c000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c3_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi3: spi@4a8c000 { compatible = "qcom,geni-spi"; reg = <0x0 0x04a8c000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; clock-names = "se"; pinctrl-0 = <&qup_spi3_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; i2c4: i2c@4a90000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a90000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c4_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi4: spi@4a90000 { compatible = "qcom,geni-spi"; reg = <0x0 0x04a90000 0x0 0x4000>; interrupts = ; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_spi4_default>; dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; uart4: serial@4a90000 { compatible = "qcom,geni-uart"; reg = <0x0 0x04a90000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; clock-names = "se"; pinctrl-0 = <&qup_uart4_default>; pinctrl-names = "default"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; i2c5: i2c@4a94000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a94000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; clock-names = "se"; pinctrl-0 = <&qup_i2c5_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config", "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spi5: spi@4a94000 { compatible = "qcom,geni-spi"; reg = <0x0 0x04a94000 0x0 0x4000>; interrupts = ; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; clock-names = "se"; pinctrl-0 = <&qup_spi5_default>; pinctrl-names = "default"; dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; usb: usb@4ef8800 { compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; reg = <0x0 0x04ef8800 0x0 0x400>; interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, <&mpm 12 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hs_phy_irq", "ss_phy_irq"; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_SLEEP_CLK>, <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB3_PRIM_CLKREF_CLK>; clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", "xo"; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <133333333>; resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; /* TODO: USB<->IPA path */ interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>; interconnect-names = "usb-ddr", "apps-usb"; wakeup-source; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; usb_dwc3: usb@4e00000 { compatible = "snps,dwc3"; reg = <0x0 0x04e00000 0x0 0xcd00>; interrupts = ; phys = <&usb_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; iommus = <&apps_smmu 0x120 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; snps,usb3_lpm_capable; maximum-speed = "super-speed"; dr_mode = "otg"; }; }; mdss: display-subsystem@5e00000 { compatible = "qcom,qcm2290-mdss"; reg = <0x0 0x05e00000 0x0 0x1000>; reg-names = "mdss"; interrupts = ; interrupt-controller; #interrupt-cells = <1>; clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_HF_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; clock-names = "iface", "bus", "core"; resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; power-domains = <&dispcc MDSS_GDSC>; iommus = <&apps_smmu 0x420 0x2>, <&apps_smmu 0x421 0x0>; interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; interconnect-names = "mdp0-mem", "cpu-cfg"; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; mdp: display-controller@5e01000 { compatible = "qcom,qcm2290-dpu"; reg = <0x0 0x05e01000 0x0 0x8f000>, <0x0 0x05eb0000 0x0 0x2008>; reg-names = "mdp", "vbif"; interrupt-parent = <&mdss>; interrupts = <0>; clocks = <&gcc GCC_DISP_HF_AXI_CLK>, <&dispcc DISP_CC_MDSS_AHB_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>, <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, <&dispcc DISP_CC_MDSS_VSYNC_CLK>; clock-names = "bus", "iface", "core", "lut", "vsync"; operating-points-v2 = <&mdp_opp_table>; power-domains = <&rpmpd QCM2290_VDDCX>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; dpu_intf1_out: endpoint { remote-endpoint = <&mdss_dsi0_in>; }; }; }; mdp_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { opp-hz = /bits/ 64 <19200000>; required-opps = <&rpmpd_opp_min_svs>; }; opp-192000000 { opp-hz = /bits/ 64 <192000000>; required-opps = <&rpmpd_opp_low_svs>; }; opp-256000000 { opp-hz = /bits/ 64 <256000000>; required-opps = <&rpmpd_opp_svs>; }; opp-307200000 { opp-hz = /bits/ 64 <307200000>; required-opps = <&rpmpd_opp_svs_plus>; }; opp-384000000 { opp-hz = /bits/ 64 <384000000>; required-opps = <&rpmpd_opp_nom>; }; }; }; mdss_dsi0: dsi@5e94000 { compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0x0 0x05e94000 0x0 0x400>; reg-names = "dsi_ctrl"; interrupt-parent = <&mdss>; interrupts = <4>; clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, <&dispcc DISP_CC_MDSS_PCLK0_CLK>, <&dispcc DISP_CC_MDSS_ESC0_CLK>, <&dispcc DISP_CC_MDSS_AHB_CLK>, <&gcc GCC_DISP_HF_AXI_CLK>; clock-names = "byte", "byte_intf", "pixel", "core", "iface", "bus"; assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmpd QCM2290_VDDCX>; phys = <&mdss_dsi0_phy>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; dsi_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { opp-hz = /bits/ 64 <19200000>; required-opps = <&rpmpd_opp_min_svs>; }; opp-164000000 { opp-hz = /bits/ 64 <164000000>; required-opps = <&rpmpd_opp_low_svs>; }; opp-187500000 { opp-hz = /bits/ 64 <187500000>; required-opps = <&rpmpd_opp_svs>; }; }; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; mdss_dsi0_in: endpoint { remote-endpoint = <&dpu_intf1_out>; }; }; port@1 { reg = <1>; mdss_dsi0_out: endpoint { }; }; }; }; mdss_dsi0_phy: phy@5e94400 { compatible = "qcom,dsi-phy-14nm-2290"; reg = <0x0 0x05e94400 0x0 0x100>, <0x0 0x05e94500 0x0 0x300>, <0x0 0x05e94800 0x0 0x188>; reg-names = "dsi_phy", "dsi_phy_lane", "dsi_pll"; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "iface", "ref"; power-domains = <&rpmpd QCM2290_VDDMX>; required-opps = <&rpmpd_opp_nom>; #clock-cells = <1>; #phy-cells = <0>; status = "disabled"; }; }; dispcc: clock-controller@5f00000 { compatible = "qcom,qcm2290-dispcc"; reg = <0x0 0x05f00000 0x0 0x20000>; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; clock-names = "bi_tcxo", "bi_tcxo_ao", "gcc_disp_gpll0_clk_src", "gcc_disp_gpll0_div_clk_src", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk"; #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; }; remoteproc_mpss: remoteproc@6080000 { compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; reg = <0x0 0x06080000 0x0 0x100>; interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack"; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "xo"; power-domains = <&rpmpd QCM2290_VDDCX>; memory-region = <&pil_modem_mem>; qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; status = "disabled"; glink-edge { interrupts = ; label = "mpss"; qcom,remote-pid = <1>; mboxes = <&apcs_glb 12>; }; }; remoteproc_adsp: remoteproc@ab00000 { compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas"; reg = <0x0 0x0ab00000 0x0 0x100>; interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; clock-names = "xo"; power-domains = <&rpmpd QCM2290_VDD_LPI_CX>, <&rpmpd QCM2290_VDD_LPI_MX>; memory-region = <&pil_adsp_mem>; qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; status = "disabled"; glink-edge { interrupts = ; label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apcs_glb 8>; }; }; apps_smmu: iommu@c600000 { compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0x0 0x0c600000 0x0 0x80000>; #iommu-cells = <2>; #global-interrupts = <1>; interrupts = , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ; }; wifi: wifi@c800000 { compatible = "qcom,wcn3990-wifi"; reg = <0x0 0x0c800000 0x0 0x800000>; reg-names = "membase"; memory-region = <&wlan_msa_mem>; interrupts = , , , , , , , , , , , ; iommus = <&apps_smmu 0x1a0 0x1>; qcom,msa-fixed-perm; status = "disabled"; }; watchdog@f017000 { compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt"; reg = <0x0 0x0f017000 0x0 0x1000>; interrupts = , ; clocks = <&sleep_clk>; }; apcs_glb: mailbox@f111000 { compatible = "qcom,qcm2290-apcs-hmss-global"; reg = <0x0 0x0f111000 0x0 0x1000>; #mbox-cells = <1>; }; timer@f120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0 0x0f120000 0x0 0x1000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x0 0x0f121000 0x8000>; frame@0 { reg = <0x0 0x1000>, <0x1000 0x1000>; interrupts = , ; frame-number = <0>; }; frame@2000 { reg = <0x2000 0x1000>; interrupts = ; frame-number = <1>; status = "disabled"; }; frame@3000 { reg = <0x3000 0x1000>; interrupts = ; frame-number = <2>; status = "disabled"; }; frame@4000 { reg = <0x4000 0x1000>; interrupts = ; frame-number = <3>; status = "disabled"; }; frame@5000 { reg = <0x5000 0x1000>; interrupts = ; frame-number = <4>; status = "disabled"; }; frame@6000 { reg = <0x6000 0x1000>; interrupts = ; frame-number = <5>; status = "disabled"; }; frame@7000 { reg = <0x7000 0x1000>; interrupts = ; frame-number = <6>; status = "disabled"; }; }; intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; reg = <0x0 0x0f200000 0x0 0x10000>, <0x0 0x0f300000 0x0 0x100000>; interrupts = ; #interrupt-cells = <3>; interrupt-controller; interrupt-parent = <&intc>; #redistributor-regions = <1>; redistributor-stride = <0x0 0x20000>; }; cpufreq_hw: cpufreq@f521000 { compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0x0 0x0f521000 0x0 0x1000>; reg-names = "freq-domain0"; interrupts = ; interrupt-names = "dcvsh-irq-0"; clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; clock-names = "xo", "alternate"; #freq-domain-cells = <1>; #clock-cells = <1>; }; }; thermal-zones { mapss-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens0 0>; trips { mapss_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; mapss_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; mapss_crit: mapss-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; video-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens0 1>; trips { video_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; video_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; video_crit: video-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; wlan-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens0 2>; trips { wlan_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; wlan_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; wlan_crit: wlan-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; cpuss0-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens0 3>; trips { cpuss0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpuss0_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpuss0_crit: cpuss0-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; cpuss1-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens0 4>; trips { cpuss1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; cpuss1_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; cpuss1_crit: cpuss1-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; mdm0-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens0 5>; trips { mdm0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; mdm0_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; mdm0_crit: mdm0-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; mdm1-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens0 6>; trips { mdm1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; mdm1_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; mdm1_crit: mdm1-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; gpu-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens0 7>; trips { gpu_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; gpu_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; gpu_crit: gpu-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; hm-center-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens0 8>; trips { hm_center_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; hm_center_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; hm_center_crit: hm-center-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; camera-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&tsens0 9>; trips { camera_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; camera_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; }; camera_crit: camera-crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; }; }; timer { compatible = "arm,armv8-timer"; interrupts = , , , ; }; };