/* * arch/ppc/platform/85xx/mpc85xx_cds_common.c * * MPC85xx CDS board specific routines * * Maintainer: Kumar Gala * * Copyright 2004 Freescale Semiconductor, Inc * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif extern unsigned long total_memory; /* in mm/init */ unsigned char __res[sizeof (bd_t)]; static int cds_pci_slot = 2; static volatile u8 * cadmus; /* Internal interrupts are all Level Sensitive, and Positive Polarity */ static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ #if defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI1 slot */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI1 slot */ #else 0x0, /* External 0: */ 0x0, /* External 1: */ 0x0, /* External 2: */ 0x0, /* External 3: */ #endif 0x0, /* External 4: */ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ 0x0, /* External 6: */ 0x0, /* External 7: */ 0x0, /* External 8: */ 0x0, /* External 9: */ 0x0, /* External 10: */ #if defined(CONFIG_85xx_PCI2) && defined(CONFIG_PCI) (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11: PCI2 slot 0 */ #else 0x0, /* External 11: */ #endif }; /* ************************************************************************ */ int mpc85xx_cds_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; uint memsize = total_memory; bd_t *binfo = (bd_t *) __res; unsigned int freq; /* get the core frequency */ freq = binfo->bi_intfreq; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); seq_printf(m, "Machine\t\t: CDS - MPC%s (%x)\n", cur_ppc_sys_spec->ppc_sys_name, cadmus[CM_VER]); seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); seq_printf(m, "PVR\t\t: 0x%x\n", pvid); seq_printf(m, "SVR\t\t: 0x%x\n", svid); /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); /* Display the amount of memory */ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); return 0; } #ifdef CONFIG_CPM2 static void cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs) { while((irq = cpm2_get_irq(regs)) >= 0) __do_IRQ(irq, regs); } static struct irqaction cpm2_irqaction = { .handler = cpm2_cascade, .flags = SA_INTERRUPT, .mask = CPU_MASK_NONE, .name = "cpm2_cascade", }; #endif /* CONFIG_CPM2 */ void __init mpc85xx_cds_init_IRQ(void) { bd_t *binfo = (bd_t *) __res; /* Determine the Physical Address of the OpenPIC regs */ phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); OpenPIC_InitSenses = mpc85xx_cds_openpic_initsenses; OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses); /* Skip reserved space and internal sources */ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); /* Map PIC IRQs 0-11 */ openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); /* we let openpic interrupts starting from an offset, to * leave space for cascading interrupts underneath. */ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); #ifdef CONFIG_CPM2 /* Setup CPM2 PIC */ cpm2_init_IRQ(); setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); #endif return; } #ifdef CONFIG_PCI /* * interrupt routing */ int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) { struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); if (!hose->index) { /* Handle PCI1 interrupts */ char pci_irq_table[][4] = /* * PCI IDSEL/INTPIN->INTLINE * A B C D */ /* Note IRQ assignment for slots is based on which slot the elysium is * in -- in this setup elysium is in slot #2 (this PIRQA as first * interrupt on slot */ { { 0, 1, 2, 3 }, /* 16 - PMC */ { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */ { 0, 1, 2, 3 }, /* 18 - Slot 1 */ { 1, 2, 3, 0 }, /* 19 - Slot 2 */ { 2, 3, 0, 1 }, /* 20 - Slot 3 */ { 3, 0, 1, 2 }, /* 21 - Slot 4 */ }; const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; int i, j; for (i = 0; i < 6; i++) for (j = 0; j < 4; j++) pci_irq_table[i][j] = ((pci_irq_table[i][j] + 5 - cds_pci_slot) & 0x3) + PIRQ0A; return PCI_IRQ_TABLE_LOOKUP; } else { /* Handle PCI2 interrupts (if we have one) */ char pci_irq_table[][4] = { /* * We only have one slot and one interrupt * going to PIRQA - PIRQD */ { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ }; const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; return PCI_IRQ_TABLE_LOOKUP; } } #define ARCADIA_HOST_BRIDGE_IDSEL 17 #define ARCADIA_2ND_BRIDGE_IDSEL 3 extern int mpc85xx_pci1_last_busno; int mpc85xx_exclude_device(u_char bus, u_char devfn) { if (bus == 0 && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; #ifdef CONFIG_85xx_PCI2 if (mpc85xx_pci1_last_busno) if (bus == (mpc85xx_pci1_last_busno + 1) && PCI_SLOT(devfn) == 0) return PCIBIOS_DEVICE_NOT_FOUND; #endif /* We explicitly do not go past the Tundra 320 Bridge */ if (bus == 1) return PCIBIOS_DEVICE_NOT_FOUND; if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) return PCIBIOS_DEVICE_NOT_FOUND; else return PCIBIOS_SUCCESSFUL; } #endif /* CONFIG_PCI */ TODC_ALLOC(); /* ************************************************************************ * * Setup the architecture * */ static void __init mpc85xx_cds_setup_arch(void) { bd_t *binfo = (bd_t *) __res; unsigned int freq; struct gianfar_platform_data *pdata; /* get the core frequency */ freq = binfo->bi_intfreq; printk("mpc85xx_cds_setup_arch\n"); #ifdef CONFIG_CPM2 cpm2_reset(); #endif cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE); cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1; printk("CDS Version = %x in PCI slot %d\n", cadmus[CM_VER], cds_pci_slot); /* Setup TODC access */ TODC_INIT(TODC_TYPE_DS1743, 0, 0, ioremap(CDS_RTC_ADDR, CDS_RTC_SIZE), 8); /* Set loops_per_jiffy to a half-way reasonable value, for use until calibrate_delay gets called. */ loops_per_jiffy = freq / HZ; #ifdef CONFIG_PCI /* setup PCI host bridges */ mpc85xx_setup_hose(); #endif #ifdef CONFIG_SERIAL_8250 mpc85xx_early_serial_map(); #endif #ifdef CONFIG_SERIAL_TEXT_DEBUG /* Invalidate the entry we stole earlier the serial ports * should be properly mapped */ invalidate_tlbcam_entry(NUM_TLBCAMS - 1); #endif /* setup the board related information for the enet controllers */ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; pdata->interruptPHY = MPC85xx_IRQ_EXT5; pdata->phyid = 0; /* fixup phy address */ pdata->phy_reg_addr += binfo->bi_immr_base; memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; pdata->interruptPHY = MPC85xx_IRQ_EXT5; pdata->phyid = 1; /* fixup phy address */ pdata->phy_reg_addr += binfo->bi_immr_base; memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) ROOT_DEV = Root_RAM0; else #endif #ifdef CONFIG_ROOT_NFS ROOT_DEV = Root_NFS; #else ROOT_DEV = Root_HDA1; #endif } /* ************************************************************************ */ void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { /* parse_bootinfo must always be called first */ parse_bootinfo(find_bootinfo()); /* * If we were passed in a board information, copy it into the * residual data area. */ if (r3) { memcpy((void *) __res, (void *) (r3 + KERNELBASE), sizeof (bd_t)); } #ifdef CONFIG_SERIAL_TEXT_DEBUG { bd_t *binfo = (bd_t *) __res; struct uart_port p; /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base, binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); memset(&p, 0, sizeof (p)); p.iotype = SERIAL_IO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; p.uartclk = binfo->bi_busfreq; gen550_init(0, &p); memset(&p, 0, sizeof (p)); p.iotype = SERIAL_IO_MEM; p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; p.uartclk = binfo->bi_busfreq; gen550_init(1, &p); } #endif #if defined(CONFIG_BLK_DEV_INITRD) /* * If the init RAM disk has been configured in, and there's a valid * starting address for it, set it up. */ if (r4) { initrd_start = r4 + KERNELBASE; initrd_end = r5 + KERNELBASE; } #endif /* CONFIG_BLK_DEV_INITRD */ /* Copy the kernel command line arguments to a safe place. */ if (r6) { *(char *) (r7 + KERNELBASE) = 0; strcpy(cmd_line, (char *) (r6 + KERNELBASE)); } identify_ppc_sys_by_id(mfspr(SPRN_SVR)); /* setup the PowerPC module struct */ ppc_md.setup_arch = mpc85xx_cds_setup_arch; ppc_md.show_cpuinfo = mpc85xx_cds_show_cpuinfo; ppc_md.init_IRQ = mpc85xx_cds_init_IRQ; ppc_md.get_irq = openpic_get_irq; ppc_md.restart = mpc85xx_restart; ppc_md.power_off = mpc85xx_power_off; ppc_md.halt = mpc85xx_halt; ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; ppc_md.calibrate_decr = mpc85xx_calibrate_decr; ppc_md.time_init = todc_time_init; ppc_md.set_rtc_time = todc_set_rtc_time; ppc_md.get_rtc_time = todc_get_rtc_time; ppc_md.nvram_read_val = todc_direct_read_val; ppc_md.nvram_write_val = todc_direct_write_val; #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) ppc_md.progress = gen550_progress; #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ if (ppc_md.progress) ppc_md.progress("mpc85xx_cds_init(): exit", 0); return; }