/* SPDX-License-Identifier: GPL-2.0 */ /* * linux/boot/head.S * * Copyright (C) 1991, 1992, 1993 Linus Torvalds */ /* * head.S contains the 32-bit startup code. * * NOTE!!! Startup happens at absolute address 0x00001000, which is also where * the page directory will exist. The startup code will be overwritten by * the page directory. [According to comments etc elsewhere on a compressed * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] * * Page 0 is deliberately kept safe, since System Management Mode code in * laptops may need to access the BIOS data stored there. This is also * useful for future device drivers that either access the BIOS via VM86 * mode. */ /* * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ .code32 .text #include #include #include #include #include #include #include #include #include #include "pgtable.h" /* * Locally defined symbols should be marked hidden: */ .hidden _bss .hidden _ebss .hidden _end __HEAD /* * This macro gives the relative virtual address of X, i.e. the offset of X * from startup_32. This is the same as the link-time virtual address of X, * since startup_32 is at 0, but defining it this way tells the * assembler/linker that we do not want the actual run-time address of X. This * prevents the linker from trying to create unwanted run-time relocation * entries for the reference when the compressed kernel is linked as PIE. * * A reference X(%reg) will result in the link-time VA of X being stored with * the instruction, and a run-time R_X86_64_RELATIVE relocation entry that * adds the 64-bit base address where the kernel is loaded. * * Replacing it with (X-startup_32)(%reg) results in the offset being stored, * and no run-time relocation. * * The macro should be used as a displacement with a base register containing * the run-time address of startup_32 [i.e. rva(X)(%reg)], or as an immediate * [$ rva(X)]. * * This macro can only be used from within the .head.text section, since the * expression requires startup_32 to be in the same section as the code being * assembled. */ #define rva(X) ((X) - startup_32) .code32 SYM_FUNC_START(startup_32) /* * 32bit entry is 0 and it is ABI so immutable! * If we come here directly from a bootloader, * kernel(text+data+bss+brk) ramdisk, zero_page, command line * all need to be under the 4G limit. */ cld cli /* * Calculate the delta between where we were compiled to run * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode * data at 0x1e4 (defined as a scratch field) are used as the stack * for this calculation. Only 4 bytes are needed. */ leal (BP_scratch+4)(%esi), %esp call 1f 1: popl %ebp subl $ rva(1b), %ebp /* Load new GDT with the 64bit segments using 32bit descriptor */ leal rva(gdt)(%ebp), %eax movl %eax, 2(%eax) lgdt (%eax) /* Load segment registers with our descriptors */ movl $__BOOT_DS, %eax movl %eax, %ds movl %eax, %es movl %eax, %fs movl %eax, %gs movl %eax, %ss /* setup a stack and make sure cpu supports long mode. */ leal rva(boot_stack_end)(%ebp), %esp call verify_cpu testl %eax, %eax jnz .Lno_longmode /* * Compute the delta between where we were compiled to run at * and where the code will actually run at. * * %ebp contains the address we are loaded at by the boot loader and %ebx * contains the address where we should move the kernel image temporarily * for safe in-place decompression. */ #ifdef CONFIG_RELOCATABLE movl %ebp, %ebx #ifdef CONFIG_EFI_STUB /* * If we were loaded via the EFI LoadImage service, startup_32 will be at an * offset to the start of the space allocated for the image. efi_pe_entry will * set up image_offset to tell us where the image actually starts, so that we * can use the full available buffer. * image_offset = startup_32 - image_base * Otherwise image_offset will be zero and has no effect on the calculations. */ subl rva(image_offset)(%ebp), %ebx #endif movl BP_kernel_alignment(%esi), %eax decl %eax addl %eax, %ebx notl %eax andl %eax, %ebx cmpl $LOAD_PHYSICAL_ADDR, %ebx jae 1f #endif movl $LOAD_PHYSICAL_ADDR, %ebx 1: /* Target address to relocate to for decompression */ addl BP_init_size(%esi), %ebx subl $ rva(_end), %ebx /* * Prepare for entering 64 bit mode */ /* Enable PAE mode */ movl %cr4, %eax orl $X86_CR4_PAE, %eax movl %eax, %cr4 /* * Build early 4G boot pagetable */ /* * If SEV is active then set the encryption mask in the page tables. * This will insure that when the kernel is copied and decompressed * it will be done so encrypted. */ call get_sev_encryption_bit xorl %edx, %edx testl %eax, %eax jz 1f subl $32, %eax /* Encryption bit is always above bit 31 */ bts %eax, %edx /* Set encryption mask for page tables */ 1: /* Initialize Page tables to 0 */ leal rva(pgtable)(%ebx), %edi xorl %eax, %eax movl $(BOOT_INIT_PGT_SIZE/4), %ecx rep stosl /* Build Level 4 */ leal rva(pgtable + 0)(%ebx), %edi leal 0x1007 (%edi), %eax movl %eax, 0(%edi) addl %edx, 4(%edi) /* Build Level 3 */ leal rva(pgtable + 0x1000)(%ebx), %edi leal 0x1007(%edi), %eax movl $4, %ecx 1: movl %eax, 0x00(%edi) addl %edx, 0x04(%edi) addl $0x00001000, %eax addl $8, %edi decl %ecx jnz 1b /* Build Level 2 */ leal rva(pgtable + 0x2000)(%ebx), %edi movl $0x00000183, %eax movl $2048, %ecx 1: movl %eax, 0(%edi) addl %edx, 4(%edi) addl $0x00200000, %eax addl $8, %edi decl %ecx jnz 1b /* Enable the boot page tables */ leal rva(pgtable)(%ebx), %eax movl %eax, %cr3 /* Enable Long mode in EFER (Extended Feature Enable Register) */ movl $MSR_EFER, %ecx rdmsr btsl $_EFER_LME, %eax wrmsr /* After gdt is loaded */ xorl %eax, %eax lldt %ax movl $__BOOT_TSS, %eax ltr %ax /* * Setup for the jump to 64bit mode * * When the jump is performend we will be in long mode but * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1 * (and in turn EFER.LMA = 1). To jump into 64bit mode we use * the new gdt/idt that has __KERNEL_CS with CS.L = 1. * We place all of the values on our mini stack so lret can * used to perform that far jump. */ leal rva(startup_64)(%ebp), %eax #ifdef CONFIG_EFI_MIXED movl rva(efi32_boot_args)(%ebp), %edi cmp $0, %edi jz 1f leal rva(efi64_stub_entry)(%ebp), %eax movl rva(efi32_boot_args+4)(%ebp), %esi movl rva(efi32_boot_args+8)(%ebp), %edx // saved bootparams pointer cmpl $0, %edx jnz 1f /* * efi_pe_entry uses MS calling convention, which requires 32 bytes of * shadow space on the stack even if all arguments are passed in * registers. We also need an additional 8 bytes for the space that * would be occupied by the return address, and this also results in * the correct stack alignment for entry. */ subl $40, %esp leal rva(efi_pe_entry)(%ebp), %eax movl %edi, %ecx // MS calling convention movl %esi, %edx 1: #endif pushl $__KERNEL_CS pushl %eax /* Enter paged protected Mode, activating Long Mode */ movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */ movl %eax, %cr0 /* Jump from 32bit compatibility mode into 64bit mode. */ lret SYM_FUNC_END(startup_32) #ifdef CONFIG_EFI_MIXED .org 0x190 SYM_FUNC_START(efi32_stub_entry) add $0x4, %esp /* Discard return address */ popl %ecx popl %edx popl %esi call 1f 1: pop %ebp subl $ rva(1b), %ebp movl %esi, rva(efi32_boot_args+8)(%ebp) SYM_INNER_LABEL(efi32_pe_stub_entry, SYM_L_LOCAL) movl %ecx, rva(efi32_boot_args)(%ebp) movl %edx, rva(efi32_boot_args+4)(%ebp) movb $0, rva(efi_is64)(%ebp) /* Save firmware GDTR and code/data selectors */ sgdtl rva(efi32_boot_gdt)(%ebp) movw %cs, rva(efi32_boot_cs)(%ebp) movw %ds, rva(efi32_boot_ds)(%ebp) /* Disable paging */ movl %cr0, %eax btrl $X86_CR0_PG_BIT, %eax movl %eax, %cr0 jmp startup_32 SYM_FUNC_END(efi32_stub_entry) #endif .code64 .org 0x200 SYM_CODE_START(startup_64) /* * 64bit entry is 0x200 and it is ABI so immutable! * We come here either from startup_32 or directly from a * 64bit bootloader. * If we come here from a bootloader, kernel(text+data+bss+brk), * ramdisk, zero_page, command line could be above 4G. * We depend on an identity mapped page table being provided * that maps our entire kernel(text+data+bss+brk), zero page * and command line. */ cld cli /* Setup data segments. */ xorl %eax, %eax movl %eax, %ds movl %eax, %es movl %eax, %ss movl %eax, %fs movl %eax, %gs /* * Compute the decompressed kernel start address. It is where * we were loaded at aligned to a 2M boundary. %rbp contains the * decompressed kernel start address. * * If it is a relocatable kernel then decompress and run the kernel * from load address aligned to 2MB addr, otherwise decompress and * run the kernel from LOAD_PHYSICAL_ADDR * * We cannot rely on the calculation done in 32-bit mode, since we * may have been invoked via the 64-bit entry point. */ /* Start with the delta to where the kernel will run at. */ #ifdef CONFIG_RELOCATABLE leaq startup_32(%rip) /* - $startup_32 */, %rbp #ifdef CONFIG_EFI_STUB /* * If we were loaded via the EFI LoadImage service, startup_32 will be at an * offset to the start of the space allocated for the image. efi_pe_entry will * set up image_offset to tell us where the image actually starts, so that we * can use the full available buffer. * image_offset = startup_32 - image_base * Otherwise image_offset will be zero and has no effect on the calculations. */ movl image_offset(%rip), %eax subq %rax, %rbp #endif movl BP_kernel_alignment(%rsi), %eax decl %eax addq %rax, %rbp notq %rax andq %rax, %rbp cmpq $LOAD_PHYSICAL_ADDR, %rbp jae 1f #endif movq $LOAD_PHYSICAL_ADDR, %rbp 1: /* Target address to relocate to for decompression */ movl BP_init_size(%rsi), %ebx subl $ rva(_end), %ebx addq %rbp, %rbx /* Set up the stack */ leaq rva(boot_stack_end)(%rbx), %rsp /* * At this point we are in long mode with 4-level paging enabled, * but we might want to enable 5-level paging or vice versa. * * The problem is that we cannot do it directly. Setting or clearing * CR4.LA57 in long mode would trigger #GP. So we need to switch off * long mode and paging first. * * We also need a trampoline in lower memory to switch over from * 4- to 5-level paging for cases when the bootloader puts the kernel * above 4G, but didn't enable 5-level paging for us. * * The same trampoline can be used to switch from 5- to 4-level paging * mode, like when starting 4-level paging kernel via kexec() when * original kernel worked in 5-level paging mode. * * For the trampoline, we need the top page table to reside in lower * memory as we don't have a way to load 64-bit values into CR3 in * 32-bit mode. * * We go though the trampoline even if we don't have to: if we're * already in a desired paging mode. This way the trampoline code gets * tested on every boot. */ /* Make sure we have GDT with 32-bit code segment */ leaq gdt64(%rip), %rax addq %rax, 2(%rax) lgdt (%rax) /* Reload CS so IRET returns to a CS actually in the GDT */ pushq $__KERNEL_CS leaq .Lon_kernel_cs(%rip), %rax pushq %rax lretq .Lon_kernel_cs: pushq %rsi call load_stage1_idt popq %rsi /* * paging_prepare() sets up the trampoline and checks if we need to * enable 5-level paging. * * paging_prepare() returns a two-quadword structure which lands * into RDX:RAX: * - Address of the trampoline is returned in RAX. * - Non zero RDX means trampoline needs to enable 5-level * paging. * * RSI holds real mode data and needs to be preserved across * this function call. */ pushq %rsi movq %rsi, %rdi /* real mode address */ call paging_prepare popq %rsi /* Save the trampoline address in RCX */ movq %rax, %rcx /* * Load the address of trampoline_return() into RDI. * It will be used by the trampoline to return to the main code. */ leaq trampoline_return(%rip), %rdi /* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */ pushq $__KERNEL32_CS leaq TRAMPOLINE_32BIT_CODE_OFFSET(%rax), %rax pushq %rax lretq trampoline_return: /* Restore the stack, the 32-bit trampoline uses its own stack */ leaq rva(boot_stack_end)(%rbx), %rsp /* * cleanup_trampoline() would restore trampoline memory. * * RDI is address of the page table to use instead of page table * in trampoline memory (if required). * * RSI holds real mode data and needs to be preserved across * this function call. */ pushq %rsi leaq rva(top_pgtable)(%rbx), %rdi call cleanup_trampoline popq %rsi /* Zero EFLAGS */ pushq $0 popfq /* * Copy the compressed kernel to the end of our buffer * where decompression in place becomes safe. */ pushq %rsi leaq (_bss-8)(%rip), %rsi leaq rva(_bss-8)(%rbx), %rdi movl $(_bss - startup_32), %ecx shrl $3, %ecx std rep movsq cld popq %rsi /* * The GDT may get overwritten either during the copy we just did or * during extract_kernel below. To avoid any issues, repoint the GDTR * to the new copy of the GDT. */ leaq rva(gdt64)(%rbx), %rax leaq rva(gdt)(%rbx), %rdx movq %rdx, 2(%rax) lgdt (%rax) /* * Jump to the relocated address. */ leaq rva(.Lrelocated)(%rbx), %rax jmp *%rax SYM_CODE_END(startup_64) #ifdef CONFIG_EFI_STUB .org 0x390 SYM_FUNC_START(efi64_stub_entry) SYM_FUNC_START_ALIAS(efi_stub_entry) and $~0xf, %rsp /* realign the stack */ movq %rdx, %rbx /* save boot_params pointer */ call efi_main movq %rbx,%rsi leaq rva(startup_64)(%rax), %rax jmp *%rax SYM_FUNC_END(efi64_stub_entry) SYM_FUNC_END_ALIAS(efi_stub_entry) #endif .text SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated) /* * Clear BSS (stack is currently empty) */ xorl %eax, %eax leaq _bss(%rip), %rdi leaq _ebss(%rip), %rcx subq %rdi, %rcx shrq $3, %rcx rep stosq /* * If running as an SEV guest, the encryption mask is required in the * page-table setup code below. When the guest also has SEV-ES enabled * set_sev_encryption_mask() will cause #VC exceptions, but the stage2 * handler can't map its GHCB because the page-table is not set up yet. * So set up the encryption mask here while still on the stage1 #VC * handler. Then load stage2 IDT and switch to the kernel's own * page-table. */ pushq %rsi call set_sev_encryption_mask call load_stage2_idt /* Pass boot_params to initialize_identity_maps() */ movq (%rsp), %rdi call initialize_identity_maps popq %rsi /* * Do the extraction, and jump to the new kernel.. */ pushq %rsi /* Save the real mode argument */ movq %rsi, %rdi /* real mode address */ leaq boot_heap(%rip), %rsi /* malloc area for uncompression */ leaq input_data(%rip), %rdx /* input_data */ movl input_len(%rip), %ecx /* input_len */ movq %rbp, %r8 /* output target address */ movl output_len(%rip), %r9d /* decompressed length, end of relocs */ call extract_kernel /* returns kernel location in %rax */ popq %rsi /* * Jump to the decompressed kernel. */ jmp *%rax SYM_FUNC_END(.Lrelocated) .code32 /* * This is the 32-bit trampoline that will be copied over to low memory. * * RDI contains the return address (might be above 4G). * ECX contains the base address of the trampoline memory. * Non zero RDX means trampoline needs to enable 5-level paging. */ SYM_CODE_START(trampoline_32bit_src) /* Set up data and stack segments */ movl $__KERNEL_DS, %eax movl %eax, %ds movl %eax, %ss /* Set up new stack */ leal TRAMPOLINE_32BIT_STACK_END(%ecx), %esp /* Disable paging */ movl %cr0, %eax btrl $X86_CR0_PG_BIT, %eax movl %eax, %cr0 /* Check what paging mode we want to be in after the trampoline */ cmpl $0, %edx jz 1f /* We want 5-level paging: don't touch CR3 if it already points to 5-level page tables */ movl %cr4, %eax testl $X86_CR4_LA57, %eax jnz 3f jmp 2f 1: /* We want 4-level paging: don't touch CR3 if it already points to 4-level page tables */ movl %cr4, %eax testl $X86_CR4_LA57, %eax jz 3f 2: /* Point CR3 to the trampoline's new top level page table */ leal TRAMPOLINE_32BIT_PGTABLE_OFFSET(%ecx), %eax movl %eax, %cr3 3: /* Set EFER.LME=1 as a precaution in case hypervsior pulls the rug */ pushl %ecx pushl %edx movl $MSR_EFER, %ecx rdmsr btsl $_EFER_LME, %eax wrmsr popl %edx popl %ecx /* Enable PAE and LA57 (if required) paging modes */ movl $X86_CR4_PAE, %eax cmpl $0, %edx jz 1f orl $X86_CR4_LA57, %eax 1: movl %eax, %cr4 /* Calculate address of paging_enabled() once we are executing in the trampoline */ leal .Lpaging_enabled - trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_OFFSET(%ecx), %eax /* Prepare the stack for far return to Long Mode */ pushl $__KERNEL_CS pushl %eax /* Enable paging again */ movl $(X86_CR0_PG | X86_CR0_PE), %eax movl %eax, %cr0 lret SYM_CODE_END(trampoline_32bit_src) .code64 SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled) /* Return from the trampoline */ jmp *%rdi SYM_FUNC_END(.Lpaging_enabled) /* * The trampoline code has a size limit. * Make sure we fail to compile if the trampoline code grows * beyond TRAMPOLINE_32BIT_CODE_SIZE bytes. */ .org trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_SIZE .code32 SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode) /* This isn't an x86-64 CPU, so hang intentionally, we cannot continue */ 1: hlt jmp 1b SYM_FUNC_END(.Lno_longmode) #include "../../kernel/verify_cpu.S" .data SYM_DATA_START_LOCAL(gdt64) .word gdt_end - gdt - 1 .quad gdt - gdt64 SYM_DATA_END(gdt64) .balign 8 SYM_DATA_START_LOCAL(gdt) .word gdt_end - gdt - 1 .long 0 .word 0 .quad 0x00cf9a000000ffff /* __KERNEL32_CS */ .quad 0x00af9a000000ffff /* __KERNEL_CS */ .quad 0x00cf92000000ffff /* __KERNEL_DS */ .quad 0x0080890000000000 /* TS descriptor */ .quad 0x0000000000000000 /* TS continued */ SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end) SYM_DATA_START(boot_idt_desc) .word boot_idt_end - boot_idt - 1 .quad 0 SYM_DATA_END(boot_idt_desc) .balign 8 SYM_DATA_START(boot_idt) .rept BOOT_IDT_ENTRIES .quad 0 .quad 0 .endr SYM_DATA_END_LABEL(boot_idt, SYM_L_GLOBAL, boot_idt_end) #ifdef CONFIG_EFI_STUB SYM_DATA(image_offset, .long 0) #endif #ifdef CONFIG_EFI_MIXED SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0) SYM_DATA(efi_is64, .byte 1) #define ST32_boottime 60 // offsetof(efi_system_table_32_t, boottime) #define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol) #define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base) __HEAD .code32 SYM_FUNC_START(efi32_pe_entry) /* * efi_status_t efi32_pe_entry(efi_handle_t image_handle, * efi_system_table_32_t *sys_table) */ pushl %ebp movl %esp, %ebp pushl %eax // dummy push to allocate loaded_image pushl %ebx // save callee-save registers pushl %edi call verify_cpu // check for long mode support testl %eax, %eax movl $0x80000003, %eax // EFI_UNSUPPORTED jnz 2f call 1f 1: pop %ebx subl $ rva(1b), %ebx /* Get the loaded image protocol pointer from the image handle */ leal -4(%ebp), %eax pushl %eax // &loaded_image leal rva(loaded_image_proto)(%ebx), %eax pushl %eax // pass the GUID address pushl 8(%ebp) // pass the image handle /* * Note the alignment of the stack frame. * sys_table * handle <-- 16-byte aligned on entry by ABI * return address * frame pointer * loaded_image <-- local variable * saved %ebx <-- 16-byte aligned here * saved %edi * &loaded_image * &loaded_image_proto * handle <-- 16-byte aligned for call to handle_protocol */ movl 12(%ebp), %eax // sys_table movl ST32_boottime(%eax), %eax // sys_table->boottime call *BS32_handle_protocol(%eax) // sys_table->boottime->handle_protocol addl $12, %esp // restore argument space testl %eax, %eax jnz 2f movl 8(%ebp), %ecx // image_handle movl 12(%ebp), %edx // sys_table movl -4(%ebp), %esi // loaded_image movl LI32_image_base(%esi), %esi // loaded_image->image_base movl %ebx, %ebp // startup_32 for efi32_pe_stub_entry /* * We need to set the image_offset variable here since startup_32() will * use it before we get to the 64-bit efi_pe_entry() in C code. */ subl %esi, %ebx movl %ebx, rva(image_offset)(%ebp) // save image_offset jmp efi32_pe_stub_entry 2: popl %edi // restore callee-save registers popl %ebx leave ret SYM_FUNC_END(efi32_pe_entry) .section ".rodata" /* EFI loaded image protocol GUID */ .balign 4 SYM_DATA_START_LOCAL(loaded_image_proto) .long 0x5b1b31a1 .word 0x9562, 0x11d2 .byte 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b SYM_DATA_END(loaded_image_proto) #endif /* * Stack and heap for uncompression */ .bss .balign 4 SYM_DATA_LOCAL(boot_heap, .fill BOOT_HEAP_SIZE, 1, 0) SYM_DATA_START_LOCAL(boot_stack) .fill BOOT_STACK_SIZE, 1, 0 .balign 16 SYM_DATA_END_LABEL(boot_stack, SYM_L_LOCAL, boot_stack_end) /* * Space for page tables (not in .bss so not zeroed) */ .section ".pgtable","aw",@nobits .balign 4096 SYM_DATA_LOCAL(pgtable, .fill BOOT_PGT_SIZE, 1, 0) /* * The page table is going to be used instead of page table in the trampoline * memory. */ SYM_DATA_LOCAL(top_pgtable, .fill PAGE_SIZE, 1, 0)