/* * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved. * * Parts of this file were based on sources as follows: * * Copyright (c) 2006-2008 Intel Corporation * Copyright (c) 2007 Dave Airlie * Copyright (C) 2011 Texas Instruments * * This program is free software and is provided to you under the terms of the * GNU General Public License version 2 as published by the Free Software * Foundation, and any use by you of this program is subject to the terms of * such GNU licence. * */ /** * DOC: ARM PrimeCell PL111 CLCD Driver * * The PL111 is a simple LCD controller that can support TFT and STN * displays. This driver exposes a standard KMS interface for them. * * This driver uses the same Device Tree binding as the fbdev CLCD * driver. While the fbdev driver supports panels that may be * connected to the CLCD internally to the CLCD driver, in DRM the * panels get split out to drivers/gpu/drm/panels/. This means that, * in converting from using fbdev to using DRM, you also need to write * a panel driver (which may be as simple as an entry in * panel-simple.c). * * The driver currently doesn't expose the cursor. The DRM API for * cursors requires support for 64x64 ARGB8888 cursor images, while * the hardware can only support 64x64 monochrome with masking * cursors. While one could imagine trying to hack something together * to look at the ARGB8888 and program reasonable in monochrome, we * just don't expose the cursor at all instead, and leave cursor * support to the X11 software cursor layer. * * TODO: * * - Fix race between setting plane base address and getting IRQ for * vsync firing the pageflip completion. * * - Expose the correct set of formats we can support based on the * "arm,pl11x,tft-r0g0b0-pads" DT property. * * - Use the "max-memory-bandwidth" DT property to filter the * supported formats. * * - Read back hardware state at boot to skip reprogramming the * hardware when doing a no-op modeset. * * - Use the CLKSEL bit to support switching between the two external * clock parents. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "pl111_drm.h" #define DRIVER_DESC "DRM module for PL111" static struct drm_mode_config_funcs mode_config_funcs = { .fb_create = drm_fb_cma_create, .atomic_check = drm_atomic_helper_check, .atomic_commit = drm_atomic_helper_commit, }; static int pl111_modeset_init(struct drm_device *dev) { struct drm_mode_config *mode_config; struct pl111_drm_dev_private *priv = dev->dev_private; int ret = 0; drm_mode_config_init(dev); mode_config = &dev->mode_config; mode_config->funcs = &mode_config_funcs; mode_config->min_width = 1; mode_config->max_width = 1024; mode_config->min_height = 1; mode_config->max_height = 768; ret = pl111_connector_init(dev); if (ret) { dev_err(dev->dev, "Failed to create pl111_drm_connector\n"); goto out_config; } /* Don't actually attach if we didn't find a drm_panel * attached to us. This will allow a kernel to include both * the fbdev pl111 driver and this one, and choose between * them based on which subsystem has support for the panel. */ if (!priv->connector.panel) { dev_info(dev->dev, "Disabling due to lack of DRM panel device.\n"); ret = -ENODEV; goto out_config; } ret = pl111_display_init(dev); if (ret != 0) { dev_err(dev->dev, "Failed to init display\n"); goto out_config; } ret = drm_vblank_init(dev, 1); if (ret != 0) { dev_err(dev->dev, "Failed to init vblank\n"); goto out_config; } drm_mode_config_reset(dev); priv->fbdev = drm_fbdev_cma_init(dev, 32, dev->mode_config.num_connector); drm_kms_helper_poll_init(dev); goto finish; out_config: drm_mode_config_cleanup(dev); finish: return ret; } DEFINE_DRM_GEM_CMA_FOPS(drm_fops); static void pl111_lastclose(struct drm_device *dev) { struct pl111_drm_dev_private *priv = dev->dev_private; drm_fbdev_cma_restore_mode(priv->fbdev); } static struct drm_driver pl111_drm_driver = { .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME | DRIVER_ATOMIC, .lastclose = pl111_lastclose, .ioctls = NULL, .fops = &drm_fops, .name = "pl111", .desc = DRIVER_DESC, .date = "20170317", .major = 1, .minor = 0, .patchlevel = 0, .dumb_create = drm_gem_cma_dumb_create, .dumb_destroy = drm_gem_dumb_destroy, .dumb_map_offset = drm_gem_cma_dumb_map_offset, .gem_free_object = drm_gem_cma_free_object, .gem_vm_ops = &drm_gem_cma_vm_ops, .enable_vblank = pl111_enable_vblank, .disable_vblank = pl111_disable_vblank, .prime_handle_to_fd = drm_gem_prime_handle_to_fd, .prime_fd_to_handle = drm_gem_prime_fd_to_handle, .gem_prime_import = drm_gem_prime_import, .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, .gem_prime_export = drm_gem_prime_export, .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, #if defined(CONFIG_DEBUG_FS) .debugfs_init = pl111_debugfs_init, #endif }; static int pl111_amba_probe(struct amba_device *amba_dev, const struct amba_id *id) { struct device *dev = &amba_dev->dev; struct pl111_drm_dev_private *priv; struct drm_device *drm; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; drm = drm_dev_alloc(&pl111_drm_driver, dev); if (IS_ERR(drm)) return PTR_ERR(drm); amba_set_drvdata(amba_dev, drm); priv->drm = drm; drm->dev_private = priv; priv->regs = devm_ioremap_resource(dev, &amba_dev->res); if (IS_ERR(priv->regs)) { dev_err(dev, "%s failed mmio\n", __func__); return PTR_ERR(priv->regs); } /* turn off interrupts before requesting the irq */ writel(0, priv->regs + CLCD_PL111_IENB); ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0, "pl111", priv); if (ret != 0) { dev_err(dev, "%s failed irq %d\n", __func__, ret); return ret; } ret = pl111_modeset_init(drm); if (ret != 0) goto dev_unref; ret = drm_dev_register(drm, 0); if (ret < 0) goto dev_unref; return 0; dev_unref: drm_dev_unref(drm); return ret; } static int pl111_amba_remove(struct amba_device *amba_dev) { struct drm_device *drm = amba_get_drvdata(amba_dev); struct pl111_drm_dev_private *priv = drm->dev_private; drm_dev_unregister(drm); if (priv->fbdev) drm_fbdev_cma_fini(priv->fbdev); drm_mode_config_cleanup(drm); drm_dev_unref(drm); return 0; } static struct amba_id pl111_id_table[] = { { .id = 0x00041111, .mask = 0x000fffff, }, {0, 0}, }; static struct amba_driver pl111_amba_driver __maybe_unused = { .drv = { .name = "drm-clcd-pl111", }, .probe = pl111_amba_probe, .remove = pl111_amba_remove, .id_table = pl111_id_table, }; #ifdef CONFIG_ARM_AMBA module_amba_driver(pl111_amba_driver); #endif MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("ARM Ltd."); MODULE_LICENSE("GPL");