/* * ddbridge-regs.h: Digital Devices PCIe bridge driver * * Copyright (C) 2010-2017 Digital Devices GmbH * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 only, as published by the Free Software Foundation. * * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * To obtain the license, point your browser to * http://www.gnu.org/copyleft/gpl.html */ /* ------------------------------------------------------------------------- */ /* SPI Controller */ #define SPI_CONTROL 0x10 #define SPI_DATA 0x14 /* ------------------------------------------------------------------------- */ /* GPIO */ #define GPIO_OUTPUT 0x20 #define GPIO_INPUT 0x24 #define GPIO_DIRECTION 0x28 /* ------------------------------------------------------------------------- */ /* MDIO */ #define MDIO_CTRL 0x20 #define MDIO_ADR 0x24 #define MDIO_REG 0x28 #define MDIO_VAL 0x2C /* ------------------------------------------------------------------------- */ #define BOARD_CONTROL 0x30 /* ------------------------------------------------------------------------- */ /* Interrupt controller * How many MSI's are available depends on HW (Min 2 max 8) * How many are usable also depends on Host platform */ #define INTERRUPT_BASE (0x40) #define INTERRUPT_ENABLE (INTERRUPT_BASE + 0x00) #define MSI1_ENABLE (INTERRUPT_BASE + 0x04) #define MSI2_ENABLE (INTERRUPT_BASE + 0x08) #define MSI3_ENABLE (INTERRUPT_BASE + 0x0C) #define MSI4_ENABLE (INTERRUPT_BASE + 0x10) #define MSI5_ENABLE (INTERRUPT_BASE + 0x14) #define MSI6_ENABLE (INTERRUPT_BASE + 0x18) #define MSI7_ENABLE (INTERRUPT_BASE + 0x1C) #define INTERRUPT_STATUS (INTERRUPT_BASE + 0x20) #define INTERRUPT_ACK (INTERRUPT_BASE + 0x20) /* Temperature Monitor ( 2x LM75A @ 0x90,0x92 I2c ) */ #define TEMPMON_BASE (0x1c0) #define TEMPMON_CONTROL (TEMPMON_BASE + 0x00) #define TEMPMON_CONTROL_AUTOSCAN (0x00000002) #define TEMPMON_CONTROL_INTENABLE (0x00000004) #define TEMPMON_CONTROL_OVERTEMP (0x00008000) /* SHORT Temperature in Celsius x 256 */ #define TEMPMON_SENSOR0 (TEMPMON_BASE + 0x04) #define TEMPMON_SENSOR1 (TEMPMON_BASE + 0x08) #define TEMPMON_FANCONTROL (TEMPMON_BASE + 0x10) /* ------------------------------------------------------------------------- */ /* I2C Master Controller */ #define I2C_COMMAND (0x00) #define I2C_TIMING (0x04) #define I2C_TASKLENGTH (0x08) /* High read, low write */ #define I2C_TASKADDRESS (0x0C) /* High read, low write */ #define I2C_MONITOR (0x1C) #define I2C_SPEED_400 (0x04030404) #define I2C_SPEED_100 (0x13121313) /* ------------------------------------------------------------------------- */ /* DMA Controller */ #define DMA_BASE_WRITE (0x100) #define DMA_BASE_READ (0x140) #define TS_CONTROL(_io) (_io->regs + 0x00) #define TS_CONTROL2(_io) (_io->regs + 0x04) /* ------------------------------------------------------------------------- */ /* DMA Buffer */ #define DMA_BUFFER_CONTROL(_dma) (_dma->regs + 0x00) #define DMA_BUFFER_ACK(_dma) (_dma->regs + 0x04) #define DMA_BUFFER_CURRENT(_dma) (_dma->regs + 0x08) #define DMA_BUFFER_SIZE(_dma) (_dma->regs + 0x0c) /* ------------------------------------------------------------------------- */ /* CI Interface (only CI-Bridge) */ #define CI_BASE (0x400) #define CI_CONTROL(i) (CI_BASE + (i) * 32 + 0x00) #define CI_DO_ATTRIBUTE_RW(i) (CI_BASE + (i) * 32 + 0x04) #define CI_DO_IO_RW(i) (CI_BASE + (i) * 32 + 0x08) #define CI_READDATA(i) (CI_BASE + (i) * 32 + 0x0c) #define CI_DO_READ_ATTRIBUTES(i) (CI_BASE + (i) * 32 + 0x10) #define CI_RESET_CAM (0x00000001) #define CI_POWER_ON (0x00000002) #define CI_ENABLE (0x00000004) #define CI_BYPASS_DISABLE (0x00000010) #define CI_CAM_READY (0x00010000) #define CI_CAM_DETECT (0x00020000) #define CI_READY (0x80000000) #define CI_READ_CMD (0x40000000) #define CI_WRITE_CMD (0x80000000) #define CI_BUFFER_BASE (0x3000) #define CI_BUFFER_SIZE (0x0800) #define CI_BUFFER(i) (CI_BUFFER_BASE + (i) * CI_BUFFER_SIZE) /* ------------------------------------------------------------------------- */ /* LNB commands (mxl5xx / Max S8) */ #define LNB_BASE (0x400) #define LNB_CONTROL(i) (LNB_BASE + (i) * 0x20 + 0x00) #define LNB_CMD (7ULL << 0) #define LNB_CMD_NOP 0 #define LNB_CMD_INIT 1 #define LNB_CMD_LOW 3 #define LNB_CMD_HIGH 4 #define LNB_CMD_OFF 5 #define LNB_CMD_DISEQC 6 #define LNB_BUSY (1ULL << 4) #define LNB_TONE (1ULL << 15) #define LNB_BUF_LEVEL(i) (LNB_BASE + (i) * 0x20 + 0x10) #define LNB_BUF_WRITE(i) (LNB_BASE + (i) * 0x20 + 0x14)