/* * NAND Flash Controller Device Driver * Copyright (c) 2009 - 2010, Intel Corporation and its suppliers. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * */ #ifndef __DENALI_H__ #define __DENALI_H__ #include #include #define DEVICE_RESET 0x0 #define DEVICE_RESET__BANK0 0x0001 #define DEVICE_RESET__BANK1 0x0002 #define DEVICE_RESET__BANK2 0x0004 #define DEVICE_RESET__BANK3 0x0008 #define TRANSFER_SPARE_REG 0x10 #define TRANSFER_SPARE_REG__FLAG 0x0001 #define LOAD_WAIT_CNT 0x20 #define LOAD_WAIT_CNT__VALUE 0xffff #define PROGRAM_WAIT_CNT 0x30 #define PROGRAM_WAIT_CNT__VALUE 0xffff #define ERASE_WAIT_CNT 0x40 #define ERASE_WAIT_CNT__VALUE 0xffff #define INT_MON_CYCCNT 0x50 #define INT_MON_CYCCNT__VALUE 0xffff #define RB_PIN_ENABLED 0x60 #define RB_PIN_ENABLED__BANK0 0x0001 #define RB_PIN_ENABLED__BANK1 0x0002 #define RB_PIN_ENABLED__BANK2 0x0004 #define RB_PIN_ENABLED__BANK3 0x0008 #define MULTIPLANE_OPERATION 0x70 #define MULTIPLANE_OPERATION__FLAG 0x0001 #define MULTIPLANE_READ_ENABLE 0x80 #define MULTIPLANE_READ_ENABLE__FLAG 0x0001 #define COPYBACK_DISABLE 0x90 #define COPYBACK_DISABLE__FLAG 0x0001 #define CACHE_WRITE_ENABLE 0xa0 #define CACHE_WRITE_ENABLE__FLAG 0x0001 #define CACHE_READ_ENABLE 0xb0 #define CACHE_READ_ENABLE__FLAG 0x0001 #define PREFETCH_MODE 0xc0 #define PREFETCH_MODE__PREFETCH_EN 0x0001 #define PREFETCH_MODE__PREFETCH_BURST_LENGTH 0xfff0 #define CHIP_ENABLE_DONT_CARE 0xd0 #define CHIP_EN_DONT_CARE__FLAG 0x01 #define ECC_ENABLE 0xe0 #define ECC_ENABLE__FLAG 0x0001 #define GLOBAL_INT_ENABLE 0xf0 #define GLOBAL_INT_EN_FLAG 0x01 #define WE_2_RE 0x100 #define WE_2_RE__VALUE 0x003f #define ADDR_2_DATA 0x110 #define ADDR_2_DATA__VALUE 0x003f #define RE_2_WE 0x120 #define RE_2_WE__VALUE 0x003f #define ACC_CLKS 0x130 #define ACC_CLKS__VALUE 0x000f #define NUMBER_OF_PLANES 0x140 #define NUMBER_OF_PLANES__VALUE 0x0007 #define PAGES_PER_BLOCK 0x150 #define PAGES_PER_BLOCK__VALUE 0xffff #define DEVICE_WIDTH 0x160 #define DEVICE_WIDTH__VALUE 0x0003 #define DEVICE_MAIN_AREA_SIZE 0x170 #define DEVICE_MAIN_AREA_SIZE__VALUE 0xffff #define DEVICE_SPARE_AREA_SIZE 0x180 #define DEVICE_SPARE_AREA_SIZE__VALUE 0xffff #define TWO_ROW_ADDR_CYCLES 0x190 #define TWO_ROW_ADDR_CYCLES__FLAG 0x0001 #define MULTIPLANE_ADDR_RESTRICT 0x1a0 #define MULTIPLANE_ADDR_RESTRICT__FLAG 0x0001 #define ECC_CORRECTION 0x1b0 #define ECC_CORRECTION__VALUE 0x001f #define READ_MODE 0x1c0 #define READ_MODE__VALUE 0x000f #define WRITE_MODE 0x1d0 #define WRITE_MODE__VALUE 0x000f #define COPYBACK_MODE 0x1e0 #define COPYBACK_MODE__VALUE 0x000f #define RDWR_EN_LO_CNT 0x1f0 #define RDWR_EN_LO_CNT__VALUE 0x001f #define RDWR_EN_HI_CNT 0x200 #define RDWR_EN_HI_CNT__VALUE 0x001f #define MAX_RD_DELAY 0x210 #define MAX_RD_DELAY__VALUE 0x000f #define CS_SETUP_CNT 0x220 #define CS_SETUP_CNT__VALUE 0x001f #define SPARE_AREA_SKIP_BYTES 0x230 #define SPARE_AREA_SKIP_BYTES__VALUE 0x003f #define SPARE_AREA_MARKER 0x240 #define SPARE_AREA_MARKER__VALUE 0xffff #define DEVICES_CONNECTED 0x250 #define DEVICES_CONNECTED__VALUE 0x0007 #define DIE_MASK 0x260 #define DIE_MASK__VALUE 0x00ff #define FIRST_BLOCK_OF_NEXT_PLANE 0x270 #define FIRST_BLOCK_OF_NEXT_PLANE__VALUE 0xffff #define WRITE_PROTECT 0x280 #define WRITE_PROTECT__FLAG 0x0001 #define RE_2_RE 0x290 #define RE_2_RE__VALUE 0x003f #define MANUFACTURER_ID 0x300 #define MANUFACTURER_ID__VALUE 0x00ff #define DEVICE_ID 0x310 #define DEVICE_ID__VALUE 0x00ff #define DEVICE_PARAM_0 0x320 #define DEVICE_PARAM_0__VALUE 0x00ff #define DEVICE_PARAM_1 0x330 #define DEVICE_PARAM_1__VALUE 0x00ff #define DEVICE_PARAM_2 0x340 #define DEVICE_PARAM_2__VALUE 0x00ff #define LOGICAL_PAGE_DATA_SIZE 0x350 #define LOGICAL_PAGE_DATA_SIZE__VALUE 0xffff #define LOGICAL_PAGE_SPARE_SIZE 0x360 #define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff #define REVISION 0x370 #define REVISION__VALUE 0xffff #define ONFI_DEVICE_FEATURES 0x380 #define ONFI_DEVICE_FEATURES__VALUE 0x003f #define ONFI_OPTIONAL_COMMANDS 0x390 #define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f #define ONFI_TIMING_MODE 0x3a0 #define ONFI_TIMING_MODE__VALUE 0x003f #define ONFI_PGM_CACHE_TIMING_MODE 0x3b0 #define ONFI_PGM_CACHE_TIMING_MODE__VALUE 0x003f #define ONFI_DEVICE_NO_OF_LUNS 0x3c0 #define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS 0x00ff #define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE 0x0100 #define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0 #define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE 0xffff #define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0 #define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE 0xffff #define FEATURES 0x3f0 #define FEATURES__N_BANKS 0x0003 #define FEATURES__ECC_MAX_ERR 0x003c #define FEATURES__DMA 0x0040 #define FEATURES__CMD_DMA 0x0080 #define FEATURES__PARTITION 0x0100 #define FEATURES__XDMA_SIDEBAND 0x0200 #define FEATURES__GPREG 0x0400 #define FEATURES__INDEX_ADDR 0x0800 #define TRANSFER_MODE 0x400 #define TRANSFER_MODE__VALUE 0x0003 #define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50)) #define INTR_EN(__bank) (0x420 + ((__bank) * 0x50)) /* bit[1:0] is used differently depending on IP version */ #define INTR__ECC_UNCOR_ERR 0x0001 /* new IP */ #define INTR__ECC_TRANSACTION_DONE 0x0001 /* old IP */ #define INTR__ECC_ERR 0x0002 /* old IP */ #define INTR__DMA_CMD_COMP 0x0004 #define INTR__TIME_OUT 0x0008 #define INTR__PROGRAM_FAIL 0x0010 #define INTR__ERASE_FAIL 0x0020 #define INTR__LOAD_COMP 0x0040 #define INTR__PROGRAM_COMP 0x0080 #define INTR__ERASE_COMP 0x0100 #define INTR__PIPE_CPYBCK_CMD_COMP 0x0200 #define INTR__LOCKED_BLK 0x0400 #define INTR__UNSUP_CMD 0x0800 #define INTR__INT_ACT 0x1000 #define INTR__RST_COMP 0x2000 #define INTR__PIPE_CMD_ERR 0x4000 #define INTR__PAGE_XFER_INC 0x8000 #define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50)) #define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50)) #define ERR_BLOCK_ADDR(__bank) (0x450 + ((__bank) * 0x50)) #define ECC_THRESHOLD 0x600 #define ECC_THRESHOLD__VALUE 0x03ff #define ECC_ERROR_BLOCK_ADDRESS 0x610 #define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff #define ECC_ERROR_PAGE_ADDRESS 0x620 #define ECC_ERROR_PAGE_ADDRESS__VALUE 0x0fff #define ECC_ERROR_PAGE_ADDRESS__BANK 0xf000 #define ECC_ERROR_ADDRESS 0x630 #define ECC_ERROR_ADDRESS__OFFSET 0x0fff #define ECC_ERROR_ADDRESS__SECTOR_NR 0xf000 #define ERR_CORRECTION_INFO 0x640 #define ERR_CORRECTION_INFO__BYTEMASK 0x00ff #define ERR_CORRECTION_INFO__DEVICE_NR 0x0f00 #define ERR_CORRECTION_INFO__ERROR_TYPE 0x4000 #define ERR_CORRECTION_INFO__LAST_ERR_INFO 0x8000 #define ECC_COR_INFO(bank) (0x650 + (bank) / 2 * 0x10) #define ECC_COR_INFO__SHIFT(bank) ((bank) % 2 * 8) #define ECC_COR_INFO__MAX_ERRORS 0x007f #define ECC_COR_INFO__UNCOR_ERR 0x0080 #define DMA_ENABLE 0x700 #define DMA_ENABLE__FLAG 0x0001 #define IGNORE_ECC_DONE 0x710 #define IGNORE_ECC_DONE__FLAG 0x0001 #define DMA_INTR 0x720 #define DMA_INTR_EN 0x730 #define DMA_INTR__TARGET_ERROR 0x0001 #define DMA_INTR__DESC_COMP_CHANNEL0 0x0002 #define DMA_INTR__DESC_COMP_CHANNEL1 0x0004 #define DMA_INTR__DESC_COMP_CHANNEL2 0x0008 #define DMA_INTR__DESC_COMP_CHANNEL3 0x0010 #define DMA_INTR__MEMCOPY_DESC_COMP 0x0020 #define TARGET_ERR_ADDR_LO 0x740 #define TARGET_ERR_ADDR_LO__VALUE 0xffff #define TARGET_ERR_ADDR_HI 0x750 #define TARGET_ERR_ADDR_HI__VALUE 0xffff #define CHNL_ACTIVE 0x760 #define CHNL_ACTIVE__CHANNEL0 0x0001 #define CHNL_ACTIVE__CHANNEL1 0x0002 #define CHNL_ACTIVE__CHANNEL2 0x0004 #define CHNL_ACTIVE__CHANNEL3 0x0008 #define FAIL 1 /*failed flag*/ #define PASS 0 /*success flag*/ #define CLK_X 5 #define CLK_MULTI 4 #define ONFI_BLOOM_TIME 1 #define MODE5_WORKAROUND 0 #define MODE_00 0x00000000 #define MODE_01 0x04000000 #define MODE_10 0x08000000 #define MODE_11 0x0C000000 #define ECC_SECTOR_SIZE 512 struct nand_buf { int head; int tail; uint8_t *buf; dma_addr_t dma_buf; }; #define INTEL_CE4100 1 #define INTEL_MRST 2 #define DT 3 struct denali_nand_info { struct nand_chip nand; int flash_bank; /* currently selected chip */ int status; int platform; struct nand_buf buf; struct device *dev; int total_used_banks; int page; void __iomem *flash_reg; /* Register Interface */ void __iomem *flash_mem; /* Host Data/Command Interface */ /* elements used by ISR */ struct completion complete; spinlock_t irq_lock; uint32_t irq_status; int irq; int devnum; /* represent how many nands connected */ int bbtskipbytes; int max_banks; unsigned int revision; unsigned int caps; }; #define DENALI_CAP_HW_ECC_FIXUP BIT(0) #define DENALI_CAP_DMA_64BIT BIT(1) extern int denali_init(struct denali_nand_info *denali); extern void denali_remove(struct denali_nand_info *denali); #endif /* __DENALI_H__ */