/* SPDX-License-Identifier: GPL-2.0 */ /* Driver for ETAS GmbH ES58X USB CAN(-FD) Bus Interfaces. * * File es58x_core.h: All common definitions and declarations. * * Copyright (c) 2019 Robert Bosch Engineering and Business Solutions. All rights reserved. * Copyright (c) 2020 ETAS K.K.. All rights reserved. * Copyright (c) 2020, 2021 Vincent Mailhol */ #ifndef __ES58X_COMMON_H__ #define __ES58X_COMMON_H__ #include #include #include #include #include #include "es581_4.h" #include "es58x_fd.h" /* Driver constants */ #define ES58X_RX_URBS_MAX 5 /* Empirical value */ #define ES58X_TX_URBS_MAX 6 /* Empirical value */ #define ES58X_MAX(param) \ (ES581_4_##param > ES58X_FD_##param ? \ ES581_4_##param : ES58X_FD_##param) #define ES58X_TX_BULK_MAX ES58X_MAX(TX_BULK_MAX) #define ES58X_RX_BULK_MAX ES58X_MAX(RX_BULK_MAX) #define ES58X_ECHO_BULK_MAX ES58X_MAX(ECHO_BULK_MAX) #define ES58X_NUM_CAN_CH_MAX ES58X_MAX(NUM_CAN_CH) /* Use this when channel index is irrelevant (e.g. device * timestamp). */ #define ES58X_CHANNEL_IDX_NA 0xFF #define ES58X_EMPTY_MSG NULL /* Threshold on consecutive CAN_STATE_ERROR_PASSIVE. If we receive * ES58X_CONSECUTIVE_ERR_PASSIVE_MAX times the event * ES58X_ERR_CRTL_PASSIVE in a row without any successful RX or TX, * we force the device to switch to CAN_STATE_BUS_OFF state. */ #define ES58X_CONSECUTIVE_ERR_PASSIVE_MAX 254 /* A magic number sent by the ES581.4 to inform it is alive. */ #define ES58X_HEARTBEAT 0x11 /** * enum es58x_driver_info - Quirks of the device. * @ES58X_DUAL_CHANNEL: Device has two CAN channels. If this flag is * not set, it is implied that the device has only one CAN * channel. * @ES58X_FD_FAMILY: Device is CAN-FD capable. If this flag is not * set, the device only supports classical CAN. */ enum es58x_driver_info { ES58X_DUAL_CHANNEL = BIT(0), ES58X_FD_FAMILY = BIT(1) }; enum es58x_echo { ES58X_ECHO_OFF = 0, ES58X_ECHO_ON = 1 }; /** * enum es58x_physical_layer - Type of the physical layer. * @ES58X_PHYSICAL_LAYER_HIGH_SPEED: High-speed CAN (c.f. ISO * 11898-2). * * Some products of the ETAS portfolio also support low-speed CAN * (c.f. ISO 11898-3). However, all the devices in scope of this * driver do not support the option, thus, the enum has only one * member. */ enum es58x_physical_layer { ES58X_PHYSICAL_LAYER_HIGH_SPEED = 1 }; enum es58x_samples_per_bit { ES58X_SAMPLES_PER_BIT_ONE = 1, ES58X_SAMPLES_PER_BIT_THREE = 2 }; /** * enum es58x_sync_edge - Synchronization method. * @ES58X_SYNC_EDGE_SINGLE: ISO CAN specification defines the use of a * single edge synchronization. The synchronization should be * done on recessive to dominant level change. * * For information, ES582.1 and ES584.1 also support a double * synchronization, requiring both recessive to dominant then dominant * to recessive level change. However, this is not supported in * SocketCAN framework, thus, the enum has only one member. */ enum es58x_sync_edge { ES58X_SYNC_EDGE_SINGLE = 1 }; /** * enum es58x_flag - CAN flags for RX/TX messages. * @ES58X_FLAG_EFF: Extended Frame Format (EFF). * @ES58X_FLAG_RTR: Remote Transmission Request (RTR). * @ES58X_FLAG_FD_BRS: Bit rate switch (BRS): second bitrate for * payload data. * @ES58X_FLAG_FD_ESI: Error State Indicator (ESI): tell if the * transmitting node is in error passive mode. * @ES58X_FLAG_FD_DATA: CAN FD frame. */ enum es58x_flag { ES58X_FLAG_EFF = BIT(0), ES58X_FLAG_RTR = BIT(1), ES58X_FLAG_FD_BRS = BIT(3), ES58X_FLAG_FD_ESI = BIT(5), ES58X_FLAG_FD_DATA = BIT(6) }; /** * enum es58x_err - CAN error detection. * @ES58X_ERR_OK: No errors. * @ES58X_ERR_PROT_STUFF: Bit stuffing error: more than 5 consecutive * equal bits. * @ES58X_ERR_PROT_FORM: Frame format error. * @ES58X_ERR_ACK: Received no ACK on transmission. * @ES58X_ERR_PROT_BIT: Single bit error. * @ES58X_ERR_PROT_CRC: Incorrect 15, 17 or 21 bits CRC. * @ES58X_ERR_PROT_BIT1: Unable to send recessive bit: tried to send * recessive bit 1 but monitored dominant bit 0. * @ES58X_ERR_PROT_BIT0: Unable to send dominant bit: tried to send * dominant bit 0 but monitored recessive bit 1. * @ES58X_ERR_PROT_OVERLOAD: Bus overload. * @ES58X_ERR_PROT_UNSPEC: Unspecified. * * Please refer to ISO 11898-1:2015, section 10.11 "Error detection" * and section 10.13 "Overload signaling" for additional details. */ enum es58x_err { ES58X_ERR_OK = 0, ES58X_ERR_PROT_STUFF = BIT(0), ES58X_ERR_PROT_FORM = BIT(1), ES58X_ERR_ACK = BIT(2), ES58X_ERR_PROT_BIT = BIT(3), ES58X_ERR_PROT_CRC = BIT(4), ES58X_ERR_PROT_BIT1 = BIT(5), ES58X_ERR_PROT_BIT0 = BIT(6), ES58X_ERR_PROT_OVERLOAD = BIT(7), ES58X_ERR_PROT_UNSPEC = BIT(31) }; /** * enum es58x_event - CAN error codes returned by the device. * @ES58X_EVENT_OK: No errors. * @ES58X_EVENT_CRTL_ACTIVE: Active state: both TR and RX error count * is less than 128. * @ES58X_EVENT_CRTL_PASSIVE: Passive state: either TX or RX error * count is greater than 127. * @ES58X_EVENT_CRTL_WARNING: Warning state: either TX or RX error * count is greater than 96. * @ES58X_EVENT_BUSOFF: Bus off. * @ES58X_EVENT_SINGLE_WIRE: Lost connection on either CAN high or CAN * low. * * Please refer to ISO 11898-1:2015, section 12.1.4 "Rules of fault * confinement" for additional details. */ enum es58x_event { ES58X_EVENT_OK = 0, ES58X_EVENT_CRTL_ACTIVE = BIT(0), ES58X_EVENT_CRTL_PASSIVE = BIT(1), ES58X_EVENT_CRTL_WARNING = BIT(2), ES58X_EVENT_BUSOFF = BIT(3), ES58X_EVENT_SINGLE_WIRE = BIT(4) }; /* enum es58x_ret_u8 - Device return error codes, 8 bit format. * * Specific to ES581.4. */ enum es58x_ret_u8 { ES58X_RET_U8_OK = 0x00, ES58X_RET_U8_ERR_UNSPECIFIED_FAILURE = 0x80, ES58X_RET_U8_ERR_NO_MEM = 0x81, ES58X_RET_U8_ERR_BAD_CRC = 0x99 }; /* enum es58x_ret_u32 - Device return error codes, 32 bit format. */ enum es58x_ret_u32 { ES58X_RET_U32_OK = 0x00000000UL, ES58X_RET_U32_ERR_UNSPECIFIED_FAILURE = 0x80000000UL, ES58X_RET_U32_ERR_NO_MEM = 0x80004001UL, ES58X_RET_U32_WARN_PARAM_ADJUSTED = 0x40004000UL, ES58X_RET_U32_WARN_TX_MAYBE_REORDER = 0x40004001UL, ES58X_RET_U32_ERR_TIMEDOUT = 0x80000008UL, ES58X_RET_U32_ERR_FIFO_FULL = 0x80003002UL, ES58X_RET_U32_ERR_BAD_CONFIG = 0x80004000UL, ES58X_RET_U32_ERR_NO_RESOURCE = 0x80004002UL }; /* enum es58x_ret_type - Type of the command returned by the ES58X * device. */ enum es58x_ret_type { ES58X_RET_TYPE_SET_BITTIMING, ES58X_RET_TYPE_ENABLE_CHANNEL, ES58X_RET_TYPE_DISABLE_CHANNEL, ES58X_RET_TYPE_TX_MSG, ES58X_RET_TYPE_RESET_RX, ES58X_RET_TYPE_RESET_TX, ES58X_RET_TYPE_DEVICE_ERR }; union es58x_urb_cmd { struct es581_4_urb_cmd es581_4_urb_cmd; struct es58x_fd_urb_cmd es58x_fd_urb_cmd; struct { /* Common header parts of all variants */ __le16 sof; u8 cmd_type; u8 cmd_id; } __packed; u8 raw_cmd[0]; }; /** * struct es58x_priv - All information specific to a CAN channel. * @can: struct can_priv must be the first member (Socket CAN relies * on the fact that function netdev_priv() returns a pointer to * a struct can_priv). * @es58x_dev: pointer to the corresponding ES58X device. * @tx_urb: Used as a buffer to concatenate the TX messages and to do * a bulk send. Please refer to es58x_start_xmit() for more * details. * @tx_tail: Index of the oldest packet still pending for * completion. @tx_tail & echo_skb_mask represents the beginning * of the echo skb FIFO, i.e. index of the first element. * @tx_head: Index of the next packet to be sent to the * device. @tx_head & echo_skb_mask represents the end of the * echo skb FIFO plus one, i.e. the first free index. * @tx_can_msg_cnt: Number of messages in @tx_urb. * @tx_can_msg_is_fd: false: all messages in @tx_urb are Classical * CAN, true: all messages in @tx_urb are CAN FD. Rationale: * ES58X FD devices do not allow to mix Classical CAN and FD CAN * frames in one single bulk transmission. * @err_passive_before_rtx_success: The ES58X device might enter in a * state in which it keeps alternating between error passive * and active states. This counter keeps track of the number of * error passive and if it gets bigger than * ES58X_CONSECUTIVE_ERR_PASSIVE_MAX, es58x_rx_err_msg() will * force the status to bus-off. * @channel_idx: Channel index, starts at zero. */ struct es58x_priv { struct can_priv can; struct es58x_device *es58x_dev; struct urb *tx_urb; u32 tx_tail; u32 tx_head; u8 tx_can_msg_cnt; bool tx_can_msg_is_fd; u8 err_passive_before_rtx_success; u8 channel_idx; }; /** * struct es58x_parameters - Constant parameters of a given hardware * variant. * @bittiming_const: Nominal bittimming constant parameters. * @data_bittiming_const: Data bittiming constant parameters. * @tdc_const: Transmission Delay Compensation constant parameters. * @bitrate_max: Maximum bitrate supported by the device. * @clock: CAN clock parameters. * @ctrlmode_supported: List of supported modes. Please refer to * can/netlink.h file for additional details. * @tx_start_of_frame: Magic number at the beginning of each TX URB * command. * @rx_start_of_frame: Magic number at the beginning of each RX URB * command. * @tx_urb_cmd_max_len: Maximum length of a TX URB command. * @rx_urb_cmd_max_len: Maximum length of a RX URB command. * @fifo_mask: Bit mask to quickly convert the tx_tail and tx_head * field of the struct es58x_priv into echo_skb * indexes. Properties: @fifo_mask = echo_skb_max - 1 where * echo_skb_max must be a power of two. Also, echo_skb_max must * not exceed the maximum size of the device internal TX FIFO * length. This parameter is used to control the network queue * wake/stop logic. * @dql_min_limit: Dynamic Queue Limits (DQL) absolute minimum limit * of bytes allowed to be queued on this network device transmit * queue. Used by the Byte Queue Limits (BQL) to determine how * frequently the xmit_more flag will be set to true in * es58x_start_xmit(). Set this value higher to optimize for * throughput but be aware that it might have a negative impact * on the latency! This value can also be set dynamically. Please * refer to Documentation/ABI/testing/sysfs-class-net-queues for * more details. * @tx_bulk_max: Maximum number of TX messages that can be sent in one * single URB packet. * @urb_cmd_header_len: Length of the URB command header. * @rx_urb_max: Number of RX URB to be allocated during device probe. * @tx_urb_max: Number of TX URB to be allocated during device probe. */ struct es58x_parameters { const struct can_bittiming_const *bittiming_const; const struct can_bittiming_const *data_bittiming_const; const struct can_tdc_const *tdc_const; u32 bitrate_max; struct can_clock clock; u32 ctrlmode_supported; u16 tx_start_of_frame; u16 rx_start_of_frame; u16 tx_urb_cmd_max_len; u16 rx_urb_cmd_max_len; u16 fifo_mask; u16 dql_min_limit; u8 tx_bulk_max; u8 urb_cmd_header_len; u8 rx_urb_max; u8 tx_urb_max; }; /** * struct es58x_operators - Function pointers used to encode/decode * the TX/RX messages. * @get_msg_len: Get field msg_len of the urb_cmd. The offset of * msg_len inside urb_cmd depends of the device model. * @handle_urb_cmd: Decode the URB command received from the device * and dispatch it to the relevant sub function. * @fill_urb_header: Fill the header of urb_cmd. * @tx_can_msg: Encode a TX CAN message and add it to the bulk buffer * cmd_buf of es58x_dev. * @enable_channel: Start the CAN channel. * @disable_channel: Stop the CAN channel. * @reset_device: Full reset of the device. N.B: this feature is only * present on the ES581.4. For ES58X FD devices, this field is * set to NULL. * @get_timestamp: Request a timestamp from the ES58X device. */ struct es58x_operators { u16 (*get_msg_len)(const union es58x_urb_cmd *urb_cmd); int (*handle_urb_cmd)(struct es58x_device *es58x_dev, const union es58x_urb_cmd *urb_cmd); void (*fill_urb_header)(union es58x_urb_cmd *urb_cmd, u8 cmd_type, u8 cmd_id, u8 channel_idx, u16 cmd_len); int (*tx_can_msg)(struct es58x_priv *priv, const struct sk_buff *skb); int (*enable_channel)(struct es58x_priv *priv); int (*disable_channel)(struct es58x_priv *priv); int (*reset_device)(struct es58x_device *es58x_dev); int (*get_timestamp)(struct es58x_device *es58x_dev); }; /** * struct es58x_device - All information specific to an ES58X device. * @dev: Device information. * @udev: USB device information. * @netdev: Array of our CAN channels. * @param: The constant parameters. * @ops: Operators. * @rx_pipe: USB reception pipe. * @tx_pipe: USB transmission pipe. * @rx_urbs: Anchor for received URBs. * @tx_urbs_busy: Anchor for TX URBs which were send to the device. * @tx_urbs_idle: Anchor for TX USB which are idle. This driver * allocates the memory for the URBs during the probe. When a TX * URB is needed, it can be taken from this anchor. The network * queue wake/stop logic should prevent this URB from getting * empty. Please refer to es58x_get_tx_urb() for more details. * @tx_urbs_idle_cnt: number of urbs in @tx_urbs_idle. * @opened_channel_cnt: number of channels opened (c.f. es58x_open() * and es58x_stop()). * @ktime_req_ns: kernel timestamp when es58x_set_realtime_diff_ns() * was called. * @realtime_diff_ns: difference in nanoseconds between the clocks of * the ES58X device and the kernel. * @timestamps: a temporary buffer to store the time stamps before * feeding them to es58x_can_get_echo_skb(). Can only be used * in RX branches. * @rx_max_packet_size: Maximum length of bulk-in URB. * @num_can_ch: Number of CAN channel (i.e. number of elements of @netdev). * @rx_cmd_buf_len: Length of @rx_cmd_buf. * @rx_cmd_buf: The device might split the URB commands in an * arbitrary amount of pieces. This buffer is used to concatenate * all those pieces. Can only be used in RX branches. This field * has to be the last one of the structure because it is has a * flexible size (c.f. es58x_sizeof_es58x_device() function). */ struct es58x_device { struct device *dev; struct usb_device *udev; struct net_device *netdev[ES58X_NUM_CAN_CH_MAX]; const struct es58x_parameters *param; const struct es58x_operators *ops; int rx_pipe; int tx_pipe; struct usb_anchor rx_urbs; struct usb_anchor tx_urbs_busy; struct usb_anchor tx_urbs_idle; atomic_t tx_urbs_idle_cnt; atomic_t opened_channel_cnt; u64 ktime_req_ns; s64 realtime_diff_ns; u64 timestamps[ES58X_ECHO_BULK_MAX]; u16 rx_max_packet_size; u8 num_can_ch; u16 rx_cmd_buf_len; union es58x_urb_cmd rx_cmd_buf; }; /** * es58x_sizeof_es58x_device() - Calculate the maximum length of * struct es58x_device. * @es58x_dev_param: The constant parameters of the device. * * The length of struct es58x_device depends on the length of its last * field: rx_cmd_buf. This macro allows to optimize the memory * allocation. * * Return: length of struct es58x_device. */ static inline size_t es58x_sizeof_es58x_device(const struct es58x_parameters *es58x_dev_param) { return offsetof(struct es58x_device, rx_cmd_buf) + es58x_dev_param->rx_urb_cmd_max_len; } static inline int __es58x_check_msg_len(const struct device *dev, const char *stringified_msg, size_t actual_len, size_t expected_len) { if (expected_len != actual_len) { dev_err(dev, "Length of %s is %zu but received command is %zu.\n", stringified_msg, expected_len, actual_len); return -EMSGSIZE; } return 0; } /** * es58x_check_msg_len() - Check the size of a received message. * @dev: Device, used to print error messages. * @msg: Received message, must not be a pointer. * @actual_len: Length of the message as advertised in the command header. * * Must be a macro in order to accept the different types of messages * as an input. Can be use with any of the messages which have a fixed * length. Check for an exact match of the size. * * Return: zero on success, -EMSGSIZE if @actual_len differs from the * expected length. */ #define es58x_check_msg_len(dev, msg, actual_len) \ __es58x_check_msg_len(dev, __stringify(msg), \ actual_len, sizeof(msg)) static inline int __es58x_check_msg_max_len(const struct device *dev, const char *stringified_msg, size_t actual_len, size_t expected_len) { if (actual_len > expected_len) { dev_err(dev, "Maximum length for %s is %zu but received command is %zu.\n", stringified_msg, expected_len, actual_len); return -EOVERFLOW; } return 0; } /** * es58x_check_msg_max_len() - Check the maximum size of a received message. * @dev: Device, used to print error messages. * @msg: Received message, must not be a pointer. * @actual_len: Length of the message as advertised in the command header. * * Must be a macro in order to accept the different types of messages * as an input. To be used with the messages of variable sizes. Only * check that the message is not bigger than the maximum expected * size. * * Return: zero on success, -EOVERFLOW if @actual_len is greater than * the expected length. */ #define es58x_check_msg_max_len(dev, msg, actual_len) \ __es58x_check_msg_max_len(dev, __stringify(msg), \ actual_len, sizeof(msg)) static inline int __es58x_msg_num_element(const struct device *dev, const char *stringified_msg, size_t actual_len, size_t msg_len, size_t elem_len) { size_t actual_num_elem = actual_len / elem_len; size_t expected_num_elem = msg_len / elem_len; if (actual_num_elem == 0) { dev_err(dev, "Minimum length for %s is %zu but received command is %zu.\n", stringified_msg, elem_len, actual_len); return -EMSGSIZE; } else if ((actual_len % elem_len) != 0) { dev_err(dev, "Received command length: %zu is not a multiple of %s[0]: %zu\n", actual_len, stringified_msg, elem_len); return -EMSGSIZE; } else if (actual_num_elem > expected_num_elem) { dev_err(dev, "Array %s is supposed to have %zu elements each of size %zu...\n", stringified_msg, expected_num_elem, elem_len); dev_err(dev, "... But received command has %zu elements (total length %zu).\n", actual_num_elem, actual_len); return -EOVERFLOW; } return actual_num_elem; } /** * es58x_msg_num_element() - Check size and give the number of * elements in a message of array type. * @dev: Device, used to print error messages. * @msg: Received message, must be an array. * @actual_len: Length of the message as advertised in the command * header. * * Must be a macro in order to accept the different types of messages * as an input. To be used on message of array type. Array's element * has to be of fixed size (else use es58x_check_msg_max_len()). Check * that the total length is an exact multiple of the length of a * single element. * * Return: number of elements in the array on success, -EOVERFLOW if * @actual_len is greater than the expected length, -EMSGSIZE if * @actual_len is not a multiple of a single element. */ #define es58x_msg_num_element(dev, msg, actual_len) \ ({ \ size_t __elem_len = sizeof((msg)[0]) + __must_be_array(msg); \ __es58x_msg_num_element(dev, __stringify(msg), actual_len, \ sizeof(msg), __elem_len); \ }) /** * es58x_priv() - Get the priv member and cast it to struct es58x_priv. * @netdev: CAN network device. * * Return: ES58X device. */ static inline struct es58x_priv *es58x_priv(struct net_device *netdev) { return (struct es58x_priv *)netdev_priv(netdev); } /** * ES58X_SIZEOF_URB_CMD() - Calculate the maximum length of an urb * command for a given message field name. * @es58x_urb_cmd_type: type (either "struct es581_4_urb_cmd" or * "struct es58x_fd_urb_cmd"). * @msg_field: name of the message field. * * Must be a macro in order to accept the different command types as * an input. * * Return: length of the urb command. */ #define ES58X_SIZEOF_URB_CMD(es58x_urb_cmd_type, msg_field) \ (offsetof(es58x_urb_cmd_type, raw_msg) \ + sizeof_field(es58x_urb_cmd_type, msg_field) \ + sizeof_field(es58x_urb_cmd_type, \ reserved_for_crc16_do_not_use)) /** * es58x_get_urb_cmd_len() - Calculate the actual length of an urb * command for a given message length. * @es58x_dev: ES58X device. * @msg_len: Length of the message. * * Add the header and CRC lengths to the message length. * * Return: length of the urb command. */ static inline size_t es58x_get_urb_cmd_len(struct es58x_device *es58x_dev, u16 msg_len) { return es58x_dev->param->urb_cmd_header_len + msg_len + sizeof(u16); } /** * es58x_get_netdev() - Get the network device. * @es58x_dev: ES58X device. * @channel_no: The channel number as advertised in the urb command. * @channel_idx_offset: Some of the ES58x starts channel numbering * from 0 (ES58X FD), others from 1 (ES581.4). * @netdev: CAN network device. * * Do a sanity check on the index provided by the device. * * Return: zero on success, -ECHRNG if the received channel number is * out of range and -ENODEV if the network device is not yet * configured. */ static inline int es58x_get_netdev(struct es58x_device *es58x_dev, int channel_no, int channel_idx_offset, struct net_device **netdev) { int channel_idx = channel_no - channel_idx_offset; *netdev = NULL; if (channel_idx < 0 || channel_idx >= es58x_dev->num_can_ch) return -ECHRNG; *netdev = es58x_dev->netdev[channel_idx]; if (!*netdev || !netif_device_present(*netdev)) return -ENODEV; return 0; } /** * es58x_get_raw_can_id() - Get the CAN ID. * @cf: CAN frame. * * Mask the CAN ID in order to only keep the significant bits. * * Return: the raw value of the CAN ID. */ static inline int es58x_get_raw_can_id(const struct can_frame *cf) { if (cf->can_id & CAN_EFF_FLAG) return cf->can_id & CAN_EFF_MASK; else return cf->can_id & CAN_SFF_MASK; } /** * es58x_get_flags() - Get the CAN flags. * @skb: socket buffer of a CAN message. * * Return: the CAN flag as an enum es58x_flag. */ static inline enum es58x_flag es58x_get_flags(const struct sk_buff *skb) { struct canfd_frame *cf = (struct canfd_frame *)skb->data; enum es58x_flag es58x_flags = 0; if (cf->can_id & CAN_EFF_FLAG) es58x_flags |= ES58X_FLAG_EFF; if (can_is_canfd_skb(skb)) { es58x_flags |= ES58X_FLAG_FD_DATA; if (cf->flags & CANFD_BRS) es58x_flags |= ES58X_FLAG_FD_BRS; if (cf->flags & CANFD_ESI) es58x_flags |= ES58X_FLAG_FD_ESI; } else if (cf->can_id & CAN_RTR_FLAG) /* Remote frames are only defined in Classical CAN frames */ es58x_flags |= ES58X_FLAG_RTR; return es58x_flags; } int es58x_can_get_echo_skb(struct net_device *netdev, u32 packet_idx, u64 *tstamps, unsigned int pkts); int es58x_tx_ack_msg(struct net_device *netdev, u16 tx_free_entries, enum es58x_ret_u32 rx_cmd_ret_u32); int es58x_rx_can_msg(struct net_device *netdev, u64 timestamp, const u8 *data, canid_t can_id, enum es58x_flag es58x_flags, u8 dlc); int es58x_rx_err_msg(struct net_device *netdev, enum es58x_err error, enum es58x_event event, u64 timestamp); void es58x_rx_timestamp(struct es58x_device *es58x_dev, u64 timestamp); int es58x_rx_cmd_ret_u8(struct device *dev, enum es58x_ret_type cmd_ret_type, enum es58x_ret_u8 rx_cmd_ret_u8); int es58x_rx_cmd_ret_u32(struct net_device *netdev, enum es58x_ret_type cmd_ret_type, enum es58x_ret_u32 rx_cmd_ret_u32); int es58x_send_msg(struct es58x_device *es58x_dev, u8 cmd_type, u8 cmd_id, const void *msg, u16 cmd_len, int channel_idx); extern const struct es58x_parameters es581_4_param; extern const struct es58x_operators es581_4_ops; extern const struct es58x_parameters es58x_fd_param; extern const struct es58x_operators es58x_fd_ops; #endif /* __ES58X_COMMON_H__ */